* [U-Boot] [PULL] : Please pull u-boot-imx
@ 2013-08-12 13:47 Stefano Babic
2013-08-17 16:26 ` [U-Boot] [PULL] : Please pull u-boot-imx - applied to a temporary repo, see inside Albert ARIBAUD
0 siblings, 1 reply; 2+ messages in thread
From: Stefano Babic @ 2013-08-12 13:47 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit fdce7b633a1de24456226b18527cc7900c34282a:
gpio: omap5-uevm: Configure the tca6424 gpio expander (2013-07-30
09:21:42 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 326ea986ac150acdc7656d57fca647db80b50158:
Merge git://git.denx.de/u-boot-arm (2013-07-31 11:30:38 +0200)
----------------------------------------------------------------
Dirk Behme (1):
mxc_gpio: Correct the GPIO handling in gpio_direction_output()
Eric Nelson (1):
mxc_ipuv3: fix memory alignment of framebuffer
Fabio Estevam (1):
mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x
Marek Vasut (1):
ARM: mxs: Consolidate configuration options
Otavio Salvador (1):
wandboard: Use splash image at screen center by default
Pardeep Kumar Singla (2):
mx6: Factor out common HDMI setup code
mx6qsabresd: Add splash screen support via HDMI
Robert Winkler (2):
imx: Add documentation for imx specific commands
imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors
Stefano Babic (1):
Merge git://git.denx.de/u-boot-arm
MAINTAINERS | 2 +-
README | 15 +
arch/arm/cpu/armv7/mx6/clock.c | 8 +
arch/arm/cpu/armv7/mx6/soc.c | 43 +
arch/arm/imx-common/cmd_hdmidet.c | 3 +-
arch/arm/include/asm/arch-mx6/clock.h | 2 +-
arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 8 +
.../nitrogen6x/README.mx6qsabrelite} | 0
board/boundary/nitrogen6x/nitrogen6x.c | 46 +-
board/freescale/mx6qsabrelite/Makefile | 28 -
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 832
--------------------
board/freescale/mx6sabresd/mx6sabresd.c | 64 +-
board/wandboard/wandboard.c | 44 +-
boards.cfg | 2 +-
drivers/gpio/mxc_gpio.c | 4 +-
drivers/video/mxc_ipuv3_fb.c | 5 +-
include/configs/apx4devkit.h | 120 +--
include/configs/m28evk.h | 192 +----
include/configs/mx23_olinuxino.h | 142 +---
include/configs/mx23evk.h | 115 +--
include/configs/mx28evk.h | 173 +---
include/configs/mx6qsabrelite.h | 284 -------
include/configs/mx6sabre_common.h | 3 +-
include/configs/mx6sabresd.h | 19 +
include/configs/mxs.h | 191 +++++
include/configs/nitrogen6x.h | 81 +-
include/configs/sc_sps_1.h | 139 +---
include/configs/wandboard.h | 2 +
28 files changed, 601 insertions(+), 1966 deletions(-)
rename board/{freescale/mx6qsabrelite/README =>
boundary/nitrogen6x/README.mx6qsabrelite} (100%)
delete mode 100644 board/freescale/mx6qsabrelite/Makefile
delete mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c
delete mode 100644 include/configs/mx6qsabrelite.h
create mode 100644 include/configs/mxs.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] [PULL] : Please pull u-boot-imx - applied to a temporary repo, see inside
2013-08-12 13:47 [U-Boot] [PULL] : Please pull u-boot-imx Stefano Babic
@ 2013-08-17 16:26 ` Albert ARIBAUD
0 siblings, 0 replies; 2+ messages in thread
From: Albert ARIBAUD @ 2013-08-17 16:26 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Mon, 12 Aug 2013 15:47:53 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit fdce7b633a1de24456226b18527cc7900c34282a:
>
> gpio: omap5-uevm: Configure the tca6424 gpio expander (2013-07-30
> 09:21:42 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 326ea986ac150acdc7656d57fca647db80b50158:
>
> Merge git://git.denx.de/u-boot-arm (2013-07-31 11:30:38 +0200)
>
> ----------------------------------------------------------------
>
> Dirk Behme (1):
> mxc_gpio: Correct the GPIO handling in gpio_direction_output()
>
> Eric Nelson (1):
> mxc_ipuv3: fix memory alignment of framebuffer
>
> Fabio Estevam (1):
> mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x
>
> Marek Vasut (1):
> ARM: mxs: Consolidate configuration options
>
> Otavio Salvador (1):
> wandboard: Use splash image at screen center by default
>
> Pardeep Kumar Singla (2):
> mx6: Factor out common HDMI setup code
> mx6qsabresd: Add splash screen support via HDMI
>
> Robert Winkler (2):
> imx: Add documentation for imx specific commands
> imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors
>
> Stefano Babic (1):
> Merge git://git.denx.de/u-boot-arm
>
> MAINTAINERS | 2 +-
> README | 15 +
> arch/arm/cpu/armv7/mx6/clock.c | 8 +
> arch/arm/cpu/armv7/mx6/soc.c | 43 +
> arch/arm/imx-common/cmd_hdmidet.c | 3 +-
> arch/arm/include/asm/arch-mx6/clock.h | 2 +-
> arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 8 +
> .../nitrogen6x/README.mx6qsabrelite} | 0
> board/boundary/nitrogen6x/nitrogen6x.c | 46 +-
> board/freescale/mx6qsabrelite/Makefile | 28 -
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 832
> --------------------
> board/freescale/mx6sabresd/mx6sabresd.c | 64 +-
> board/wandboard/wandboard.c | 44 +-
> boards.cfg | 2 +-
> drivers/gpio/mxc_gpio.c | 4 +-
> drivers/video/mxc_ipuv3_fb.c | 5 +-
> include/configs/apx4devkit.h | 120 +--
> include/configs/m28evk.h | 192 +----
> include/configs/mx23_olinuxino.h | 142 +---
> include/configs/mx23evk.h | 115 +--
> include/configs/mx28evk.h | 173 +---
> include/configs/mx6qsabrelite.h | 284 -------
> include/configs/mx6sabre_common.h | 3 +-
> include/configs/mx6sabresd.h | 19 +
> include/configs/mxs.h | 191 +++++
> include/configs/nitrogen6x.h | 81 +-
> include/configs/sc_sps_1.h | 139 +---
> include/configs/wandboard.h | 2 +
> 28 files changed, 601 insertions(+), 1966 deletions(-)
> rename board/{freescale/mx6qsabrelite/README =>
> boundary/nitrogen6x/README.mx6qsabrelite} (100%)
> delete mode 100644 board/freescale/mx6qsabrelite/Makefile
> delete mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c
> delete mode 100644 include/configs/mx6qsabrelite.h
> create mode 100644 include/configs/mxs.h
>
>
Applied to u-boot-arm/master, thanks -- BUT at the moment I cannot push
to u-boot-arm at denx. While this gets solved, I have set up a temporary
repo at 88.191.163.10. People can fetch it with
git fetch git://88.191.163.10/u-boot-arm
You won't have write access of course.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-08-17 16:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-12 13:47 [U-Boot] [PULL] : Please pull u-boot-imx Stefano Babic
2013-08-17 16:26 ` [U-Boot] [PULL] : Please pull u-boot-imx - applied to a temporary repo, see inside Albert ARIBAUD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.