All of lore.kernel.org
 help / color / mirror / Atom feed
* sd8787 (mwifiex) on big endian system
@ 2013-08-26 10:27 Tobias Waldekranz
  2013-08-26 19:16 ` Bing Zhao
  0 siblings, 1 reply; 6+ messages in thread
From: Tobias Waldekranz @ 2013-08-26 10:27 UTC (permalink / raw)
  To: linux-wireless

As the subject suggests, I am trying to use the SD8787 on a PPC
system. I have found a few endian related issues (submitted a few
hours ago), but it is still not working.

So my first question, has anyone successfully used an mwifiex device
on a big endian system?

Also, I have found that the chip seems to signal interrupts before its
internal registers are in a consistent state. Specifically, the
sdio_ireg and wr_bitmask seems to be out of sync. Inserting a small
delay in mwifiex_interrupt_status (sdio.c), currently 50 us solves the
problem. Is there some bit that should be polled here to make sure that
the registers are in a consistent state?

^ permalink raw reply	[flat|nested] 6+ messages in thread
* RE: sd8787 (mwifiex) on big endian system
  2013-08-26 10:27 sd8787 (mwifiex) on big endian system Tobias Waldekranz
@ 2013-08-26 19:16 ` Bing Zhao
  2013-08-27  6:17   ` Tobias Waldekranz
  0 siblings, 1 reply; 6+ messages in thread
From: Bing Zhao @ 2013-08-26 19:16 UTC (permalink / raw)
  To: Tobias Waldekranz; +Cc: linux-wireless

Hi Tobias,

> As the subject suggests, I am trying to use the SD8787 on a PPC
> system. I have found a few endian related issues (submitted a few
> hours ago), but it is still not working.
> 
> So my first question, has anyone successfully used an mwifiex device
> on a big endian system?

AFAIK, you are probably the first one to try on a big endian system ;)

> 
> Also, I have found that the chip seems to signal interrupts before its
> internal registers are in a consistent state. Specifically, the
> sdio_ireg and wr_bitmask seems to be out of sync. Inserting a small
> delay in mwifiex_interrupt_status (sdio.c), currently 50 us solves the
> problem. Is there some bit that should be polled here to make sure that
> the registers are in a consistent state?

Can you enable dynamic debug and post the logs showing the register mismatch?

Thanks,
Bing

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: sd8787 (mwifiex) on big endian system
  2013-08-26 19:16 ` Bing Zhao
@ 2013-08-27  6:17   ` Tobias Waldekranz
  2013-08-27 23:42     ` Bing Zhao
  0 siblings, 1 reply; 6+ messages in thread
From: Tobias Waldekranz @ 2013-08-27  6:17 UTC (permalink / raw)
  To: Bing Zhao; +Cc: linux-wireless

On Mon, Aug 26, 2013 at 12:16:00PM -0700, Bing Zhao wrote:
> Hi Tobias,
> 
> > As the subject suggests, I am trying to use the SD8787 on a PPC
> > system. I have found a few endian related issues (submitted a few
> > hours ago), but it is still not working.
> > 
> > So my first question, has anyone successfully used an mwifiex device
> > on a big endian system?
> 
> AFAIK, you are probably the first one to try on a big endian system ;)
> 
> > 
> > Also, I have found that the chip seems to signal interrupts before its
> > internal registers are in a consistent state. Specifically, the
> > sdio_ireg and wr_bitmask seems to be out of sync. Inserting a small
> > delay in mwifiex_interrupt_status (sdio.c), currently 50 us solves the
> > problem. Is there some bit that should be polled here to make sure that
> > the registers are in a consistent state?
> 
> Can you enable dynamic debug and post the logs showing the register mismatch?
> 
> Thanks,
> Bing

Hi Bing,

Here is the log output without the added udelay. It is always the 0xd9
command that fails, but not always with these sdio_ireg/wr_bitmask
values. I have seen these combinations:

 - sdio_ireg incorrect(2), wr_bitmask incorrect(fffe)
 - sdio_ireg   correct(3), wr_bitmask incorrect(fffe)
 - sdio_ireg incorrect(2), wr_bitmask   correct(ffff)

Waiting 50 us before reading the mp_regs always returns the correct
response.

mmc0: new high speed SDIO card at address 0001
mwifiex_sdio: info: vendor=0x02DF device=0x9119 class=0 function=1
mwifiex_sdio: info: SDIO FUNC1 IO port: 0x10000
mwifiex_sdio mmc0:0001:1: info: downloading FW image (447384 bytes)
mwifiex_sdio mmc0:0001:1: info: FW download over, size 447384 bytes
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xa9, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1035334.499952): 0xa9, act 0x0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=12
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1035334.645688): 0x80a9, result 0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xa9, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x3, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1035334.645742): 0x3, act 0x0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=75
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1035334.664109): 0x8003, result 0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: fw_release_number- 0x600e4209
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: permanent addr: 00:06:c6:37:45:28
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: hw_if_version=0x2 version=0x41
mwifiex_sdio mmc0:0001:1: cmd: mp_end_port 16, data port mask 0xfffe
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x3, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: set tx_buf=2048
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd9, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1035334.664215): 0xd9, act 0x1, len 16, seqno 0x3
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x2
mwifiex_sdio mmc0:0001:1: int: DNLD: wr_bitmap=0xfffe
mwifiex_sdio mmc0:0001:1: info:  <--- Tx DONE Interrupt --->
mwifiex_sdio mmc0:0001:1: info: cmd_sent=1 data_sent=0
mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id (1035344.696670) = 0xd9, act = 0x1
mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_timeout = 1
mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
mwifiex_sdio mmc0:0001:1: last_cmd_index = 3
mwifiex_sdio mmc0:0001:1: last_cmd_id: 00 00 00 a9 00 03 00 d9 00 00
mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 00 00 00 00 00 00 01 00 00
mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 2
mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: 00 00 80 a9 80 03 00 00 00 00
mwifiex_sdio mmc0:0001:1: last_event_index = 0
mwifiex_sdio mmc0:0001:1: last_event: 00 00 00 00 00 00 00 00 00 00
mwifiex_sdio mmc0:0001:1: data_sent=0 cmd_sent=1
mwifiex_sdio mmc0:0001:1: ps_mode=0 ps_state=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd9, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd completed: status=-110
mwifiex_sdio mmc0:0001:1: cmd timeout
mwifiex_sdio: Resetting card...
mwifiex_sdio: info: SDIO func num=1
mwifiex_sdio mmc0:0001:1: cmd: calling mwifiex_shutdown_drv...
mwifiex_sdio mmc0:0001:1: info: shutdown mwifiex...
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 1
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 2
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 3
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 4
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 5
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 6
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 7
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 0, head = dea340d0
mwifiex_sdio mmc0:0001:1: info: Delete node c79be1a0, next = c79be1b0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 1, head = dea340e0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 2, head = dea340f0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 1
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 2
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 3
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 4
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 5
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 6
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 7
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 0, head = dea340d0
mwifiex_sdio mmc0:0001:1: info: Delete node c79be1b0, next = c79be1c0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 1, head = dea340e0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 2, head = dea340f0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 0
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 1
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 2
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 3
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 4
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 5
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 6
mwifiex_sdio mmc0:0001:1: info: ra_list: freeing buf for tid 7
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 0, head = dea340d0
mwifiex_sdio mmc0:0001:1: info: Delete node c79be1c0, next = dea340d0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 1, head = dea340e0
mwifiex_sdio mmc0:0001:1: info: delete BSS priority table, bss_type = 0, bss_num = 0, i = 2, head = dea340f0
mwifiex_sdio mmc0:0001:1: info: free cmd buffer
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 0
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 1
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 2
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 3
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 4
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 5
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 6
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 7
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 8
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 9
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 10
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 11
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 12
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 13
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 14
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 15
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 16
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 17
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 18
mwifiex_sdio mmc0:0001:1: cmd: free cmd buffer 19
mwifiex_sdio mmc0:0001:1: cmd: free cmd pool
mwifiex_sdio mmc0:0001:1: info: free scan table
mwifiex_sdio mmc0:0001:1: cmd: mwifiex_shutdown_drv done
WARNING: driver mwifiex_sdio did not remove its interrupt handler!
mmc0: card 0001 removed
mmc0: new high speed SDIO card at address 0001
mwifiex_sdio: info: vendor=0x02DF device=0x9119 class=0 function=1
mwifiex_sdio: info: SDIO FUNC1 IO port: 0x10000
mwifiex_sdio mmc0:0001:1: info: downloading FW image (447384 bytes)
mwifiex_sdio mmc0:0001:1: poll card status failed, tries = 100
mwifiex_sdio mmc0:0001:1: FW download with helper: poll status timeout @ 0
mwifiex_sdio mmc0:0001:1: prog_fw failed ret=0xffffffff

Thanks
 - wkz

^ permalink raw reply	[flat|nested] 6+ messages in thread
* RE: sd8787 (mwifiex) on big endian system
  2013-08-27  6:17   ` Tobias Waldekranz
@ 2013-08-27 23:42     ` Bing Zhao
  2013-08-28 11:52       ` Tobias Waldekranz
  0 siblings, 1 reply; 6+ messages in thread
From: Bing Zhao @ 2013-08-27 23:42 UTC (permalink / raw)
  To: Tobias Waldekranz; +Cc: linux-wireless

Hi Tobias,

> Hi Bing,
> 
> Here is the log output without the added udelay. It is always the 0xd9
> command that fails, but not always with these sdio_ireg/wr_bitmask
> values. I have seen these combinations:
> 
>  - sdio_ireg incorrect(2), wr_bitmask incorrect(fffe)
>  - sdio_ireg   correct(3), wr_bitmask incorrect(fffe)
>  - sdio_ireg incorrect(2), wr_bitmask   correct(ffff)
> 
> Waiting 50 us before reading the mp_regs always returns the correct
> response.

Thanks for the logs.

Could you try the following change to bypass 0xd9 command?

diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifi
index c0268b5..3cecc86 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1541,6 +1541,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8
                if (ret)
                        return -1;

+#if 0
                /* Reconfigure tx buf size */
                ret = mwifiex_send_cmd_sync(priv,
                                            HostCmd_CMD_RECONFIGURE_TX_BUFF,
@@ -1548,6 +1549,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8
                                            &priv->adapter->tx_buf_size);
                if (ret)
                        return -1;
+#endif

                if (priv->bss_type != MWIFIEX_BSS_TYPE_UAP) {
                        /* Enable IEEE PS by default */

Thanks,
Bing


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: sd8787 (mwifiex) on big endian system
  2013-08-27 23:42     ` Bing Zhao
@ 2013-08-28 11:52       ` Tobias Waldekranz
  2013-08-29  0:00         ` Bing Zhao
  0 siblings, 1 reply; 6+ messages in thread
From: Tobias Waldekranz @ 2013-08-28 11:52 UTC (permalink / raw)
  To: Bing Zhao; +Cc: linux-wireless

On Tue, Aug 27, 2013 at 04:42:37PM -0700, Bing Zhao wrote:
> Hi Tobias,
> 
> > Hi Bing,
> > 
> > Here is the log output without the added udelay. It is always the 0xd9
> > command that fails, but not always with these sdio_ireg/wr_bitmask
> > values. I have seen these combinations:
> > 
> >  - sdio_ireg incorrect(2), wr_bitmask incorrect(fffe)
> >  - sdio_ireg   correct(3), wr_bitmask incorrect(fffe)
> >  - sdio_ireg incorrect(2), wr_bitmask   correct(ffff)
> > 
> > Waiting 50 us before reading the mp_regs always returns the correct
> > response.
> 
> Thanks for the logs.
> 
> Could you try the following change to bypass 0xd9 command?
> 
> diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifi
> index c0268b5..3cecc86 100644
> --- a/drivers/net/wireless/mwifiex/sta_cmd.c
> +++ b/drivers/net/wireless/mwifiex/sta_cmd.c
> @@ -1541,6 +1541,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8
>                 if (ret)
>                         return -1;
> 
> +#if 0
>                 /* Reconfigure tx buf size */
>                 ret = mwifiex_send_cmd_sync(priv,
>                                             HostCmd_CMD_RECONFIGURE_TX_BUFF,
> @@ -1548,6 +1549,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8
>                                             &priv->adapter->tx_buf_size);
>                 if (ret)
>                         return -1;
> +#endif
> 
>                 if (priv->bss_type != MWIFIEX_BSS_TYPE_UAP) {
>                         /* Enable IEEE PS by default */
> 
> Thanks,
> Bing
> 

Hi,

Here is the log:

mmc0: new high speed SDIO card at address 0001
mwifiex_sdio: info: vendor=0x02DF device=0x9119 class=0 function=1
mwifiex_sdio: info: SDIO FUNC1 IO port: 0x10000
mwifiex_sdio mmc0:0001:1: info: downloading FW image (447384 bytes)
mwifiex_sdio mmc0:0001:1: info: FW download over, size 447384 bytes
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xa9, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141981.833590): 0xa9, act 0x0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=12
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141981.989543): 0x80a9, result 0, len 8, seqno 0x1
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xa9, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x3, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141981.989581): 0x3, act 0x0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=75
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.7678): 0x8003, result 0, len 71, seqno 0x2
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: fw_release_number- 0x600e4209
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: permanent addr: 00:06:c6:37:45:28
mwifiex_sdio mmc0:0001:1: info: GET_HW_SPEC: hw_if_version=0x2 version=0x41
mwifiex_sdio mmc0:0001:1: cmd: mp_end_port 16, data port mask 0xfffe
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x3, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: PS Command: Enter PS
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xe4, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.7772): 0xe4, act 0xff, len 30, seqno 0x3
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=34
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.37680): 0x80e4, result 0, len 30, seqno 0x3
mwifiex_sdio mmc0:0001:1: info: mwifiex_ret_enh_power_mode: PS_MODE cmd reply result=0x0 action=0XFF
mwifiex_sdio mmc0:0001:1: cmd: Enabled STA power save
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xe4, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd6, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.37730): 0xd6, act 0x0, len 44, seqno 0x4
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=804
mwifiex_sdio mmc0:0001:1: info: rx_len = 1024 skb->len = 1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 1024
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.58031): 0x80d6, result 0, len 800, seqno 0x4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd6, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x1e, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.58065): 0x1e, act 0x0, len 14, seqno 0x5
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.77665): 0x801e, result 0, len 14, seqno 0x5
mwifiex_sdio mmc0:0001:1: Current TxPower Level=0, Max Power=18, Min Power=4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x1e, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.77706): 0x83, act 0x1, len 24, seqno 0x6
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x83, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=28
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.97644): 0x8083, result 0, len 24, seqno 0x6
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x83, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.97677): 0xdf, act 0x1, len 14, seqno 0x7
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xdf, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.117648): 0x80df, result 0, len 14, seqno 0x7
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xdf, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.117679): 0x28, act 0x13, len 12, seqno 0x8
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.137678): 0x8028, result 0, len 12, seqno 0x8
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: PS Command: Enter Auto Deep Sleep
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xe4, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.137743): 0xe4, act 0xff, len 18, seqno 0x9
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=22
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.157687): 0x80e4, result 0, len 18, seqno 0x9
mwifiex_sdio mmc0:0001:1: info: mwifiex_ret_enh_power_mode: PS_MODE cmd reply result=0x0 action=0XFF
mwifiex_sdio mmc0:0001:1: cmd: Enabled auto deep sleep
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xe4, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: cmd_oid = 0x9
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: Action=0x1, OID=0x9, OIDSize=0x2, Value=0x0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x16, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.157781): 0x16, act 0x1, len 16, seqno 0xa
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.177667): 0x8016, result 0, len 16, seqno 0xa
mwifiex_sdio mmc0:0001:1: info: SNMP_RESP: oid value = 0x9, query_type = 0x1, buf size = 0x2
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x16, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xcd, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.177711): 0xcd, act 0x1, len 16, seqno 0xb
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.197711): 0x80cd, result 0, len 16, seqno 0xb
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xcd, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd6, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.197745): 0xd6, act 0x0, len 44, seqno 0xc
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=804
mwifiex_sdio mmc0:0001:1: info: rx_len = 1024 skb->len = 1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 1024
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.218053): 0x80d6, result 0, len 800, seqno 0xc
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd6, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x1e, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.218090): 0x1e, act 0x0, len 14, seqno 0xd
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.237678): 0x801e, result 0, len 14, seqno 0xd
mwifiex_sdio mmc0:0001:1: Current TxPower Level=0, Max Power=18, Min Power=4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x1e, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.237719): 0x83, act 0x1, len 24, seqno 0xe
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x83, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=28
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.257659): 0x8083, result 0, len 24, seqno 0xe
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x83, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xdf, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.257693): 0xdf, act 0x1, len 14, seqno 0xf
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.277659): 0x80df, result 0, len 14, seqno 0xf
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xdf, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.277690): 0x28, act 0x13, len 12, seqno 0x10
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.297670): 0x8028, result 0, len 12, seqno 0x10
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: cmd_oid = 0x9
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: Action=0x1, OID=0x9, OIDSize=0x2, Value=0x0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x16, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.297738): 0x16, act 0x1, len 16, seqno 0x11
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.317665): 0x8016, result 0, len 16, seqno 0x11
mwifiex_sdio mmc0:0001:1: info: SNMP_RESP: oid value = 0x9, query_type = 0x1, buf size = 0x2
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x16, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.317707): 0xcd, act 0x1, len 16, seqno 0x12
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xcd, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.318964): 0x80cd, result 0, len 16, seqno 0x12
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xcd, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xd6, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.318993): 0xd6, act 0x0, len 44, seqno 0x13
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=804
mwifiex_sdio mmc0:0001:1: info: rx_len = 1024 skb->len = 1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 1024
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.319768): 0x80d6, result 0, len 800, seqno 0x13
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xd6, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x1e, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.319828): 0x1e, act 0x0, len 14, seqno 0x14
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.320202): 0x801e, result 0, len 14, seqno 0x14
mwifiex_sdio mmc0:0001:1: Current TxPower Level=0, Max Power=18, Min Power=4
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x1e, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.320240): 0x83, act 0x1, len 24, seqno 0x15
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x83, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=28
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.320593): 0x8083, result 0, len 24, seqno 0x15
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x83, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xdf, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.320647): 0xdf, act 0x1, len 14, seqno 0x16
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.321017): 0x80df, result 0, len 14, seqno 0x16
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xdf, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.321047): 0x28, act 0x13, len 12, seqno 0x17
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.321415): 0x8028, result 0, len 12, seqno 0x17
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: cmd_oid = 0x9
mwifiex_sdio mmc0:0001:1: cmd: SNMP_CMD: Action=0x1, OID=0x9, OIDSize=0x2, Value=0x0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x16, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.321482): 0x16, act 0x1, len 16, seqno 0x18
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.321850): 0x8016, result 0, len 16, seqno 0x18
mwifiex_sdio mmc0:0001:1: info: SNMP_RESP: oid value = 0x9, query_type = 0x1, buf size = 0x2
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x16, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.321888): 0xcd, act 0x1, len 16, seqno 0x19
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xcd, cmd_pending=1
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.322259): 0x80cd, result 0, len 16, seqno 0x19
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xcd, cmd_pending=0
mwifiex_sdio mmc0:0001:1: ignoring F/W country code US
mwifiex_sdio mmc0:0001:1: info: mlan0: Marvell 802.11 Adapter
mwifiex_sdio mmc0:0001:1: info: uap0: Marvell 802.11 Adapter
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xeb, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.362104): 0xeb, act 0x1, len 12, seqno 0x201a
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.364515): 0x80eb, result 0, len 12, seqno 0x201a
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xeb, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xeb, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.364593): 0xeb, act 0x1, len 12, seqno 0x201b
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.366498): 0x80eb, result 0, len 12, seqno 0x201b
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xeb, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xeb, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1141982.366578): 0xeb, act 0x1, len 12, seqno 0x201c
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1141982.367029): 0x80eb, result 0, len 12, seqno 0x201c
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xeb, cmd_pending=0
mwifiex_sdio mmc0:0001:1: info: p2p0: Marvell 802.11 Adapter
mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (66.14.96.p9) 
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (66.14.96.p9) 
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=10
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Event ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: info: EVENT: SLEEP
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=1
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available


The driver seems to complete the initialization process. But if I now
launch hostapd, I get a timeout in another command (0xb1):

mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x10c, cmd_pending=1
mwifiex_sdio mmc0:0001:1: event: wakeup device...
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x10c, cmd_pending=2
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x3
mwifiex_sdio mmc0:0001:1: int: DNLD: wr_bitmap=0xffff
mwifiex_sdio mmc0:0001:1: info:  <--- Tx DONE Interrupt --->
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=10
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Event ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: info: EVENT: AWAKE
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.253127): 0x10c, act 0x1, len 14, seqno 0x101e
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: Enable Promiscuous mode
mwifiex_sdio mmc0:0001:1: info: old_pkt_filter=0x13, curr_pkt_filter=0x93
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=3
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: Enable Promiscuous mode
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: old_pkt_filter=0x93, curr_pkt_filter=0x93
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: info: Enable Promiscuous mode
mwifiex_sdio mmc0:0001:1: info: old_pkt_filter=0x93, curr_pkt_filter=0x93
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.253760): 0x810c, result 0, len 14, seqno 0x101e
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x10c, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.253789): 0x10c, act 0x1, len 14, seqno 0x101f
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=18
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.254157): 0x810c, result 0, len 14, seqno 0x101f
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x10c, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.254180): 0x28, act 0x93, len 12, seqno 0x1020
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.255185): 0x8028, result 0, len 12, seqno 0x1021
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.257267): 0x28, act 0x93, len 12, seqno 0x1022
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.257653): 0x8028, result 0, len 12, seqno 0x1022
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.257859): 0x28, act 0x93, len 12, seqno 0x1023
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.258220): 0x8028, result 0, len 12, seqno 0x1023
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.258392): 0x28, act 0x93, len 12, seqno 0x1024
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=16
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.258745): 0x8028, result 0, len 12, seqno 0x1024
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x28, cmd_pending=0
mwifiex_sdio mmc0:0001:1: info: 11D: no_of_triplet=0x1
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x5b, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xb2, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.259117): 0x5b, act 0x1, len 20, seqno 0x25
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=24
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.259522): 0x805b, result 0, len 20, seqno 0x25
mwifiex_sdio mmc0:0001:1: info: 11D Domain Info Resp: no_of_triplet=1
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0x5b, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.259553): 0xb2, act 0x0, len 8, seqno 0x1026
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=12
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.259880): 0x80b2, result 0, len 8, seqno 0x1026
mwifiex_sdio mmc0:0001:1: cmd completed: status=0
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xb2, cmd_pending=0
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xb0, cmd_pending=1
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xb1, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0x28, cmd_pending=3
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.259960): 0xb0, act 0x1, len 115, seqno 0x1027
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=119
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1142011.260400): 0x80b0, result 0, len 115, seqno 0x1027
mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xb0, cmd_pending=2
mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1142011.260426): 0xb1, act 0x0, len 8, seqno 0x1028
mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=21
mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
mwifiex_sdio mmc0:0001:1: info: --- Rx: Event ---
mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
mwifiex_sdio mmc0:0001:1: info: no more rd_port available
mwifiex_sdio mmc0:0001:1: event: 1142011.264553: cause: 0x2e
mwifiex_sdio mmc0:0001:1: AP EVENT: event id: 0x2e
mwifiex_sdio mmc0:0001:1: cmd_wait_q terminated: -512
mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id (1142021.275294) = 0xb1, act = 0x0
mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
mwifiex_sdio mmc0:0001:1: num_cmd_timeout = 1
mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
mwifiex_sdio mmc0:0001:1: last_cmd_index = 4
mwifiex_sdio mmc0:0001:1: last_cmd_id: 00 28 00 5b 00 b2 00 b0 00 b1
mwifiex_sdio mmc0:0001:1: last_cmd_act: 00 93 00 01 00 00 00 01 00 00
mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 3
mwifiex_sdio mmc0:0001:1: last_cmd_resp_id: 80 28 80 5b 80 b2 80 b0 80 28
mwifiex_sdio mmc0:0001:1: last_event_index = 3
mwifiex_sdio mmc0:0001:1: last_event: 00 00 00 0b 00 0a 00 2e 00 00
mwifiex_sdio mmc0:0001:1: data_sent=0 cmd_sent=0
mwifiex_sdio mmc0:0001:1: ps_mode=1 ps_state=0
mwifiex_sdio: Resetting card...

-- 
Thanks
 - wkz

^ permalink raw reply	[flat|nested] 6+ messages in thread
* RE: sd8787 (mwifiex) on big endian system
  2013-08-28 11:52       ` Tobias Waldekranz
@ 2013-08-29  0:00         ` Bing Zhao
  0 siblings, 0 replies; 6+ messages in thread
From: Bing Zhao @ 2013-08-29  0:00 UTC (permalink / raw)
  To: Tobias Waldekranz; +Cc: linux-wireless

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

Hi Tobias,

> mwifiex_sdio mmc0:0001:1: event: 1142011.264553: cause: 0x2e
> mwifiex_sdio mmc0:0001:1: AP EVENT: event id: 0x2e
> mwifiex_sdio mmc0:0001:1: cmd_wait_q terminated: -512
> mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id (1142021.275294) = 0xb1, act = 0x0

The SDIO_INT of the command response might have been missing for some reason.
Could you please apply the debug patch attached for checking the read_bitmap after a timeout?

Thanks,
Bing



[-- Attachment #2: int_missing.diff --]
[-- Type: application/octet-stream, Size: 2772 bytes --]

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 2d76147..88fd41f 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -25,6 +25,7 @@
 #include "wmm.h"
 #include "11n.h"
 #include "11ac.h"
+#include "sdio.h"
 
 /*
  * This function initializes a command node.
@@ -902,8 +903,11 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 {
 	struct mwifiex_adapter *adapter =
 		(struct mwifiex_adapter *) function_context;
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
 	struct cmd_ctrl_node *cmd_node;
 	struct timeval tstamp;
+	u32 bitmap;
 
 	adapter->num_cmd_timeout++;
 	adapter->dbg.num_cmd_timeout++;
@@ -961,6 +965,21 @@ mwifiex_cmd_timeout_func(unsigned long function_context)
 		dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n",
 			adapter->ps_mode, adapter->ps_state);
 
+		bitmap = (u32) card->mp_regs[reg->rd_bitmap_l];
+		bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
+		dev_err(adapter->dev, "DBG: old: rd_bitmap=0x%x  0x%x\n",
+			card->mp_rd_bitmap, bitmap);
+		if (adapter->if_ops.read_data_sync) {
+			if (adapter->if_ops.read_data_sync(adapter, card->mp_regs,
+				   card->reg->max_mp_regs,
+				   REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK, 0))
+				dev_err(adapter->dev, "DBG: read mp_regs failed\n");
+		}
+		bitmap = (u32) card->mp_regs[reg->rd_bitmap_l];
+		bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
+		dev_err(adapter->dev, "DBG: new: rd_bitmap=0x%x  int=0x%x\n",
+			bitmap, card->mp_regs[HOST_INTSTATUS_REG]);
+
 		if (cmd_node->wait_q_enabled) {
 			adapter->cmd_wait_q.status = -ETIMEDOUT;
 			wake_up_interruptible(&adapter->cmd_wait_q.wait);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 1d72f13..a55d2fb 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -620,6 +620,8 @@ struct mwifiex_if_ops {
 	int (*dnld_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *);
 	void (*card_reset) (struct mwifiex_adapter *);
 	int (*clean_pcie_ring) (struct mwifiex_adapter *adapter);
+	int (*read_data_sync) (struct mwifiex_adapter *adapter, u8 *buffer,
+				  u32 len, u32 port, u8 claim);
 };
 
 struct mwifiex_adapter {
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 1576104..58c0641 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -1958,6 +1958,7 @@ static struct mwifiex_if_ops sdio_ops = {
 	.cmdrsp_complete = mwifiex_sdio_cmdrsp_complete,
 	.event_complete = mwifiex_sdio_event_complete,
 	.card_reset = mwifiex_sdio_card_reset,
+	.read_data_sync = mwifiex_read_data_sync,
 };
 
 /*

^ permalink raw reply related	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-08-29  0:01 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-26 10:27 sd8787 (mwifiex) on big endian system Tobias Waldekranz
2013-08-26 19:16 ` Bing Zhao
2013-08-27  6:17   ` Tobias Waldekranz
2013-08-27 23:42     ` Bing Zhao
2013-08-28 11:52       ` Tobias Waldekranz
2013-08-29  0:00         ` Bing Zhao

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.