From: Tony Lindgren <tony@atomide.com>
To: Tero Kristo <t-kristo@ti.com>
Cc: linux-omap@vger.kernel.org, paul@pwsan.com, nm@ti.com,
rnayak@ti.com, bcousson@baylibre.com, mturquette@linaro.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
Date: Sun, 6 Oct 2013 19:15:57 -0700 [thread overview]
Message-ID: <20131007021556.GV8949@atomide.com> (raw)
In-Reply-To: <524EE00F.7010208@ti.com>
* Tero Kristo <t-kristo@ti.com> [131004 08:42]:
> Hi,
>
> Just a gentle reminder, anybody have any comments on this series or
> should we start queuing stuff?
Well omap4 seems to work for me just fine, and omap3 in legacy
mode. But looks like omap3 device tree based booting is breaking
after I pulled in your test branch. I get the following on
3630 based dm3730.
Regards,
Tony
[ 0.187652] omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
[ 0.187713] omap_hwmod: uart4: cannot _init_clocks
[ 0.187713] ------------[ cut here ]------------
[ 0.187774] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80()
[ 0.187774] omap_hwmod: uart4: couldn't init clocks
[ 0.187774] Modules linked in:
[ 0.187805] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.187866] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.187896] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.187927] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.187957] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.187988] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c07a4bec>] (_init+0x6c/0x80)
[ 0.188018] [<c07a4bec>] (_init+0x6c/0x80) from [<c002e068>] (omap_hwmod_for_each+0x50/0x64)
[ 0.188049] [<c002e068>] (omap_hwmod_for_each+0x50/0x64) from [<c07a5440>] (__omap_hwmod_setup_all+0x34/0x4c)
[ 0.188079] [<c07a5440>] (__omap_hwmod_setup_all+0x34/0x4c) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 0.188110] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 0.188140] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 0.188171] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 0.188201] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.188415] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.810241] ------------[ cut here ]------------
[ 0.810302] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280()
[ 0.810302] omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state
[ 0.810333] Modules linked in:
[ 0.810363] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.810394] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.810424] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.810455] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.810485] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.810516] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003085c>] (_enable+0x254/0x280)
[ 0.810546] [<c003085c>] (_enable+0x254/0x280) from [<c00308b0>] (omap_hwmod_enable+0x28/0x40)
[ 0.810577] [<c00308b0>] (omap_hwmod_enable+0x28/0x40) from [<c0030f8c>] (omap_device_enable+0x3c/0x80)
[ 0.810607] [<c0030f8c>] (omap_device_enable+0x3c/0x80) from [<c0030fe0>] (_od_runtime_resume+0x10/0x1c)
[ 0.810638] [<c0030fe0>] (_od_runtime_resume+0x10/0x1c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 0.810668] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 0.810699] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036f444>] (rpm_resume+0x3c0/0x60c)
[ 0.810729] [<c036f444>] (rpm_resume+0x3c0/0x60c) from [<c036f970>] (__pm_runtime_resume+0x4c/0x68)
[ 0.810760] [<c036f970>] (__pm_runtime_resume+0x4c/0x68) from [<c0044954>] (omap_dm_timer_probe+0x234/0x334)
[ 0.810791] [<c0044954>] (omap_dm_timer_probe+0x234/0x334) from [<c03659ac>] (platform_drv_probe+0x1c/0x24)
[ 0.810821] [<c03659ac>] (platform_drv_probe+0x1c/0x24) from [<c03645e4>] (really_probe+0x70/0x200)
[ 0.810852] [<c03645e4>] (really_probe+0x70/0x200) from [<c03647a8>] (driver_probe_device+0x34/0x50)
[ 0.810852] [<c03647a8>] (driver_probe_device+0x34/0x50) from [<c0364858>] (__driver_attach+0x94/0x98)
[ 0.810882] [<c0364858>] (__driver_attach+0x94/0x98) from [<c0362cd4>] (bus_for_each_dev+0x74/0x98)
[ 0.810913] [<c0362cd4>] (bus_for_each_dev+0x74/0x98) from [<c0363510>] (bus_add_driver+0xe8/0x278)
[ 0.810943] [<c0363510>] (bus_add_driver+0xe8/0x278) from [<c0364e30>] (driver_register+0x5c/0xf8)
[ 0.810974] [<c0364e30>] (driver_register+0x5c/0xf8) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 0.811004] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 0.811035] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 0.811065] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 0.811096] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.811126] ---[ end trace 1b75b31a2719ed1d ]---
[ 0.811889] ------------[ cut here ]------------
[ 0.811920] WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8()
[ 0.811920] omap_hwmod: timer12: idle state can only be entered from enabled state
[ 0.811950] Modules linked in:
[ 0.811981] CPU: 0 PID: 46 Comm: kworker/0:1 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.812011] Workqueue: pm pm_runtime_work
[ 0.812042] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.812072] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.812103] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.812133] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.812164] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003099c>] (_idle+0xd4/0xf8)
[ 0.812194] [<c003099c>] (_idle+0xd4/0xf8) from [<c0030c9c>] (omap_hwmod_idle+0x28/0x3c)
[ 0.812225] [<c0030c9c>] (omap_hwmod_idle+0x28/0x3c) from [<c0030e6c>] (omap_device_idle+0x3c/0x80)
[ 0.812225] [<c0030e6c>] (omap_device_idle+0x3c/0x80) from [<c0030ed0>] (_od_runtime_suspend+0x20/0x2c)
[ 0.812255] [<c0030ed0>] (_od_runtime_suspend+0x20/0x2c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 0.812286] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 0.812316] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036e5bc>] (rpm_suspend+0xf4/0x5e4)
[ 0.812347] [<c036e5bc>] (rpm_suspend+0xf4/0x5e4) from [<c036fb78>] (pm_runtime_work+0x80/0xa4)
[ 0.812377] [<c036fb78>] (pm_runtime_work+0x80/0xa4) from [<c0064058>] (process_one_work+0x204/0x594)
[ 0.812408] [<c0064058>] (process_one_work+0x204/0x594) from [<c0064530>] (worker_thread+0x148/0x480)
[ 0.812438] [<c0064530>] (worker_thread+0x148/0x480) from [<c0069c20>] (kthread+0xa0/0xac)
[ 0.812469] [<c0069c20>] (kthread+0xa0/0xac) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.812499] ---[ end trace 1b75b31a2719ed1e ]---
[ 2.595031] ------------[ cut here ]------------
[ 2.599945] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280()
[ 2.609313] omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state
[ 2.619506] Modules linked in:
[ 2.622772] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 2.632537] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 2.641540] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 2.650115] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 2.659576] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 2.669708] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003085c>] (_enable+0x254/0x280)
[ 2.678802] [<c003085c>] (_enable+0x254/0x280) from [<c00308b0>] (omap_hwmod_enable+0x28/0x40)
[ 2.687927] [<c00308b0>] (omap_hwmod_enable+0x28/0x40) from [<c0030f8c>] (omap_device_enable+0x3c/0x80)
[ 2.697875] [<c0030f8c>] (omap_device_enable+0x3c/0x80) from [<c0030fe0>] (_od_runtime_resume+0x10/0x1c)
[ 2.707916] [<c0030fe0>] (_od_runtime_resume+0x10/0x1c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 2.717559] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 2.726684] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036f444>] (rpm_resume+0x3c0/0x60c)
[ 2.735595] [<c036f444>] (rpm_resume+0x3c0/0x60c) from [<c036f970>] (__pm_runtime_resume+0x4c/0x68)
[ 2.745178] [<c036f970>] (__pm_runtime_resume+0x4c/0x68) from [<c035ae30>] (serial_omap_probe+0x294/0x4fc)
[ 2.755401] [<c035ae30>] (serial_omap_probe+0x294/0x4fc) from [<c03659ac>] (platform_drv_probe+0x1c/0x24)
[ 2.765502] [<c03659ac>] (platform_drv_probe+0x1c/0x24) from [<c03645e4>] (really_probe+0x70/0x200)
[ 2.775054] [<c03645e4>] (really_probe+0x70/0x200) from [<c03647a8>] (driver_probe_device+0x34/0x50)
[ 2.784729] [<c03647a8>] (driver_probe_device+0x34/0x50) from [<c0364858>] (__driver_attach+0x94/0x98)
[ 2.794555] [<c0364858>] (__driver_attach+0x94/0x98) from [<c0362cd4>] (bus_for_each_dev+0x74/0x98)
[ 2.804138] [<c0362cd4>] (bus_for_each_dev+0x74/0x98) from [<c0363510>] (bus_add_driver+0xe8/0x278)
[ 2.813690] [<c0363510>] (bus_add_driver+0xe8/0x278) from [<c0364e30>] (driver_register+0x5c/0xf8)
[ 2.823181] [<c0364e30>] (driver_register+0x5c/0xf8) from [<c07d0028>] (serial_omap_init+0x28/0x44)
[ 2.832763] [<c07d0028>] (serial_omap_init+0x28/0x44) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 2.842407] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 2.851898] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 2.861846] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 2.871490] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 2.880432] ---[ end trace 1b75b31a2719ed1f ]---
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
Date: Sun, 6 Oct 2013 19:15:57 -0700 [thread overview]
Message-ID: <20131007021556.GV8949@atomide.com> (raw)
In-Reply-To: <524EE00F.7010208@ti.com>
* Tero Kristo <t-kristo@ti.com> [131004 08:42]:
> Hi,
>
> Just a gentle reminder, anybody have any comments on this series or
> should we start queuing stuff?
Well omap4 seems to work for me just fine, and omap3 in legacy
mode. But looks like omap3 device tree based booting is breaking
after I pulled in your test branch. I get the following on
3630 based dm3730.
Regards,
Tony
[ 0.187652] omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
[ 0.187713] omap_hwmod: uart4: cannot _init_clocks
[ 0.187713] ------------[ cut here ]------------
[ 0.187774] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80()
[ 0.187774] omap_hwmod: uart4: couldn't init clocks
[ 0.187774] Modules linked in:
[ 0.187805] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.187866] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.187896] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.187927] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.187957] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.187988] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c07a4bec>] (_init+0x6c/0x80)
[ 0.188018] [<c07a4bec>] (_init+0x6c/0x80) from [<c002e068>] (omap_hwmod_for_each+0x50/0x64)
[ 0.188049] [<c002e068>] (omap_hwmod_for_each+0x50/0x64) from [<c07a5440>] (__omap_hwmod_setup_all+0x34/0x4c)
[ 0.188079] [<c07a5440>] (__omap_hwmod_setup_all+0x34/0x4c) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 0.188110] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 0.188140] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 0.188171] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 0.188201] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.188415] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.810241] ------------[ cut here ]------------
[ 0.810302] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280()
[ 0.810302] omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state
[ 0.810333] Modules linked in:
[ 0.810363] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.810394] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.810424] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.810455] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.810485] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.810516] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003085c>] (_enable+0x254/0x280)
[ 0.810546] [<c003085c>] (_enable+0x254/0x280) from [<c00308b0>] (omap_hwmod_enable+0x28/0x40)
[ 0.810577] [<c00308b0>] (omap_hwmod_enable+0x28/0x40) from [<c0030f8c>] (omap_device_enable+0x3c/0x80)
[ 0.810607] [<c0030f8c>] (omap_device_enable+0x3c/0x80) from [<c0030fe0>] (_od_runtime_resume+0x10/0x1c)
[ 0.810638] [<c0030fe0>] (_od_runtime_resume+0x10/0x1c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 0.810668] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 0.810699] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036f444>] (rpm_resume+0x3c0/0x60c)
[ 0.810729] [<c036f444>] (rpm_resume+0x3c0/0x60c) from [<c036f970>] (__pm_runtime_resume+0x4c/0x68)
[ 0.810760] [<c036f970>] (__pm_runtime_resume+0x4c/0x68) from [<c0044954>] (omap_dm_timer_probe+0x234/0x334)
[ 0.810791] [<c0044954>] (omap_dm_timer_probe+0x234/0x334) from [<c03659ac>] (platform_drv_probe+0x1c/0x24)
[ 0.810821] [<c03659ac>] (platform_drv_probe+0x1c/0x24) from [<c03645e4>] (really_probe+0x70/0x200)
[ 0.810852] [<c03645e4>] (really_probe+0x70/0x200) from [<c03647a8>] (driver_probe_device+0x34/0x50)
[ 0.810852] [<c03647a8>] (driver_probe_device+0x34/0x50) from [<c0364858>] (__driver_attach+0x94/0x98)
[ 0.810882] [<c0364858>] (__driver_attach+0x94/0x98) from [<c0362cd4>] (bus_for_each_dev+0x74/0x98)
[ 0.810913] [<c0362cd4>] (bus_for_each_dev+0x74/0x98) from [<c0363510>] (bus_add_driver+0xe8/0x278)
[ 0.810943] [<c0363510>] (bus_add_driver+0xe8/0x278) from [<c0364e30>] (driver_register+0x5c/0xf8)
[ 0.810974] [<c0364e30>] (driver_register+0x5c/0xf8) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 0.811004] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 0.811035] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 0.811065] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 0.811096] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.811126] ---[ end trace 1b75b31a2719ed1d ]---
[ 0.811889] ------------[ cut here ]------------
[ 0.811920] WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8()
[ 0.811920] omap_hwmod: timer12: idle state can only be entered from enabled state
[ 0.811950] Modules linked in:
[ 0.811981] CPU: 0 PID: 46 Comm: kworker/0:1 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.812011] Workqueue: pm pm_runtime_work
[ 0.812042] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.812072] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.812103] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.812133] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.812164] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003099c>] (_idle+0xd4/0xf8)
[ 0.812194] [<c003099c>] (_idle+0xd4/0xf8) from [<c0030c9c>] (omap_hwmod_idle+0x28/0x3c)
[ 0.812225] [<c0030c9c>] (omap_hwmod_idle+0x28/0x3c) from [<c0030e6c>] (omap_device_idle+0x3c/0x80)
[ 0.812225] [<c0030e6c>] (omap_device_idle+0x3c/0x80) from [<c0030ed0>] (_od_runtime_suspend+0x20/0x2c)
[ 0.812255] [<c0030ed0>] (_od_runtime_suspend+0x20/0x2c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 0.812286] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 0.812316] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036e5bc>] (rpm_suspend+0xf4/0x5e4)
[ 0.812347] [<c036e5bc>] (rpm_suspend+0xf4/0x5e4) from [<c036fb78>] (pm_runtime_work+0x80/0xa4)
[ 0.812377] [<c036fb78>] (pm_runtime_work+0x80/0xa4) from [<c0064058>] (process_one_work+0x204/0x594)
[ 0.812408] [<c0064058>] (process_one_work+0x204/0x594) from [<c0064530>] (worker_thread+0x148/0x480)
[ 0.812438] [<c0064530>] (worker_thread+0x148/0x480) from [<c0069c20>] (kthread+0xa0/0xac)
[ 0.812469] [<c0069c20>] (kthread+0xa0/0xac) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.812499] ---[ end trace 1b75b31a2719ed1e ]---
[ 2.595031] ------------[ cut here ]------------
[ 2.599945] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280()
[ 2.609313] omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state
[ 2.619506] Modules linked in:
[ 2.622772] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 2.632537] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 2.641540] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 2.650115] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 2.659576] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 2.669708] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003085c>] (_enable+0x254/0x280)
[ 2.678802] [<c003085c>] (_enable+0x254/0x280) from [<c00308b0>] (omap_hwmod_enable+0x28/0x40)
[ 2.687927] [<c00308b0>] (omap_hwmod_enable+0x28/0x40) from [<c0030f8c>] (omap_device_enable+0x3c/0x80)
[ 2.697875] [<c0030f8c>] (omap_device_enable+0x3c/0x80) from [<c0030fe0>] (_od_runtime_resume+0x10/0x1c)
[ 2.707916] [<c0030fe0>] (_od_runtime_resume+0x10/0x1c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 2.717559] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 2.726684] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036f444>] (rpm_resume+0x3c0/0x60c)
[ 2.735595] [<c036f444>] (rpm_resume+0x3c0/0x60c) from [<c036f970>] (__pm_runtime_resume+0x4c/0x68)
[ 2.745178] [<c036f970>] (__pm_runtime_resume+0x4c/0x68) from [<c035ae30>] (serial_omap_probe+0x294/0x4fc)
[ 2.755401] [<c035ae30>] (serial_omap_probe+0x294/0x4fc) from [<c03659ac>] (platform_drv_probe+0x1c/0x24)
[ 2.765502] [<c03659ac>] (platform_drv_probe+0x1c/0x24) from [<c03645e4>] (really_probe+0x70/0x200)
[ 2.775054] [<c03645e4>] (really_probe+0x70/0x200) from [<c03647a8>] (driver_probe_device+0x34/0x50)
[ 2.784729] [<c03647a8>] (driver_probe_device+0x34/0x50) from [<c0364858>] (__driver_attach+0x94/0x98)
[ 2.794555] [<c0364858>] (__driver_attach+0x94/0x98) from [<c0362cd4>] (bus_for_each_dev+0x74/0x98)
[ 2.804138] [<c0362cd4>] (bus_for_each_dev+0x74/0x98) from [<c0363510>] (bus_add_driver+0xe8/0x278)
[ 2.813690] [<c0363510>] (bus_add_driver+0xe8/0x278) from [<c0364e30>] (driver_register+0x5c/0xf8)
[ 2.823181] [<c0364e30>] (driver_register+0x5c/0xf8) from [<c07d0028>] (serial_omap_init+0x28/0x44)
[ 2.832763] [<c07d0028>] (serial_omap_init+0x28/0x44) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 2.842407] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 2.851898] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 2.861846] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 2.871490] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 2.880432] ---[ end trace 1b75b31a2719ed1f ]---
next prev parent reply other threads:[~2013-10-07 2:15 UTC|newest]
Thread overview: 136+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-25 8:48 [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 01/36] CLK: TI: Add DPLL clock support Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 04/36] CLK: ti: add support for ti divider-clock Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 07/36] CLK: TI: add support for clockdomain binding Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 08/36] ARM: dts: omap4 clock data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 10/36] clk: ti: add support for basic mux clock Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 11/36] CLK: TI: add omap4 clock init file Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 12/36] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 13/36] ARM: dts: omap5 clock data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 15/36] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 18/36] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 19/36] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
2013-09-25 8:48 ` Tero Kristo
[not found] ` <1380098922-30340-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2013-09-25 8:48 ` [PATCHv7 02/36] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 03/36] CLK: TI: add autoidle support Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 05/36] clk: ti: add support for TI fixed factor clock Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 06/36] CLK: TI: add support for OMAP gate clock Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 09/36] clk: ti: add mux-gate clock support Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 14/36] CLK: TI: add omap5 clock init file Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 16/36] ARM: dts: dra7 clock data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 17/36] ARM: dts: clk: Add apll related clocks Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 20/36] CLK: TI: DRA7: Add APLL support Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-10-08 5:16 ` Mike Turquette
2013-10-08 5:16 ` Mike Turquette
2013-09-25 8:48 ` [PATCHv7 21/36] CLK: TI: add dra7 clock init file Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 22/36] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 25/36] CLK: TI: add am33xx clock init file Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 26/36] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 27/36] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 28/36] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 29/36] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 30/36] ARM: dts: omap3 clock data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-26 16:06 ` Nishanth Menon
2013-09-26 16:06 ` Nishanth Menon
2013-09-26 16:23 ` Nishanth Menon
2013-09-26 16:23 ` Nishanth Menon
2013-09-25 8:48 ` [PATCHv7 31/36] CLK: TI: add omap3 clock init file Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 34/36] ARM: dts: am43xx clock data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 36/36] CLK: TI: add am43xx clock init file Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-26 15:21 ` [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT Nishanth Menon
2013-09-26 15:21 ` Nishanth Menon
2013-09-26 15:29 ` Nishanth Menon
2013-09-26 15:29 ` Nishanth Menon
2013-10-04 15:34 ` Tero Kristo
2013-10-04 15:34 ` Tero Kristo
2013-10-07 2:15 ` Tony Lindgren [this message]
2013-10-07 2:15 ` Tony Lindgren
2013-10-07 6:35 ` Tero Kristo
2013-10-07 6:35 ` Tero Kristo
2013-10-07 15:41 ` Tony Lindgren
2013-10-07 15:41 ` Tony Lindgren
2013-10-07 16:13 ` Nishanth Menon
2013-10-07 16:13 ` Nishanth Menon
2013-10-07 19:03 ` Tony Lindgren
2013-10-07 19:03 ` Tony Lindgren
[not found] ` <20131007190322.GY8949-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2013-10-09 18:55 ` Paul Walmsley
2013-10-09 18:55 ` Paul Walmsley
2013-10-09 18:59 ` Paul Walmsley
2013-10-09 18:59 ` Paul Walmsley
2013-10-09 19:24 ` Tony Lindgren
2013-10-09 19:24 ` Tony Lindgren
2013-10-10 7:18 ` Tero Kristo
2013-10-10 7:18 ` Tero Kristo
2013-10-11 17:54 ` Paul Walmsley
2013-10-11 17:54 ` Paul Walmsley
2013-10-11 18:23 ` Tero Kristo
2013-10-11 18:23 ` Tero Kristo
2013-10-11 22:26 ` Paul Walmsley
2013-10-11 22:26 ` Paul Walmsley
2013-10-11 18:46 ` Tero Kristo
2013-10-11 18:46 ` Tero Kristo
2013-10-11 22:37 ` Paul Walmsley
2013-10-11 22:37 ` Paul Walmsley
2013-10-12 10:25 ` Tero Kristo
2013-10-12 10:25 ` Tero Kristo
2013-10-13 23:45 ` Paul Walmsley
2013-10-13 23:45 ` Paul Walmsley
2013-10-14 14:57 ` Tero Kristo
2013-10-14 14:57 ` Tero Kristo
2013-10-14 18:27 ` Paul Walmsley
2013-10-14 18:27 ` Paul Walmsley
2013-10-14 18:34 ` Tero Kristo
2013-10-14 18:34 ` Tero Kristo
2013-10-09 19:22 ` Tony Lindgren
2013-10-09 19:22 ` Tony Lindgren
2013-10-10 8:17 ` Tero Kristo
2013-10-10 8:17 ` Tero Kristo
2013-10-11 22:53 ` Tony Lindgren
2013-10-11 22:53 ` Tony Lindgren
2013-09-25 8:48 ` [PATCHv7 23/36] ARM: dts: DRA7: link in clock DT data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 24/36] ARM: dts: am33xx clock data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 32/36] ARM: dts: AM35xx: use DT " Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 33/36] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-09-25 8:48 ` [PATCHv7 35/36] ARM: dts: AM43xx: link in clock DT data Tero Kristo
2013-09-25 8:48 ` Tero Kristo
2013-10-08 5:40 ` [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT Mike Turquette
2013-10-08 5:40 ` Mike Turquette
2013-10-08 8:17 ` Tero Kristo
2013-10-08 8:17 ` Tero Kristo
2013-10-08 16:47 ` Tony Lindgren
2013-10-08 16:47 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131007021556.GV8949@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.