[GIT PULL 0/3] Renesas ARM based SoC cleanups for v3.13

[GIT PULL 0/3] Renesas ARM based SoC cleanups for v3.13

[Simon Horman]

Hi Kevin, Olof and Arnd,

please consider these Renesas ARM based SoC cleanups for v3.13.

This pull request is based on v3.12-rc1.


The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:

  Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.13

for you to fetch changes up to cde214a890f81797a5eee94fffc89c1de21ed991:

  ARM: shmobile: r8a7790: Constify platform data and resources (2013-09-19 14:33:44 -0700)

----------------------------------------------------------------
Renesas ARM based SoC cleanups for v3.13

* Constify platform data and resources of r8a7790 SoC
* Rename to r8a7790_init_delay() as r8a7790_init_early()
  - This is in preparation for doing more than just initialising the delay
* Rename r8a73a4_init_delay() as r8a73a4_init_early()
  - This is in preparation for doing more than just initialising the delay

----------------------------------------------------------------
Laurent Pinchart (1):
      ARM: shmobile: r8a7790: Constify platform data and resources

Magnus Damm (2):
      ARM: shmobile: Rename to r8a73a4_init_early()
      ARM: shmobile: Rename to r8a7790_init_early()

 arch/arm/mach-shmobile/board-ape6evm-reference.c |  2 +-
 arch/arm/mach-shmobile/board-ape6evm.c           |  2 +-
 arch/arm/mach-shmobile/board-lager-reference.c   |  2 +-
 arch/arm/mach-shmobile/board-lager.c             |  2 +-
 arch/arm/mach-shmobile/include/mach/r8a73a4.h    |  2 +-
 arch/arm/mach-shmobile/include/mach/r8a7790.h    |  2 +-
 arch/arm/mach-shmobile/setup-r8a73a4.c           |  4 ++--
 arch/arm/mach-shmobile/setup-r8a7790.c           | 25 ++++++++++++------------
 8 files changed, 21 insertions(+), 20 deletions(-)

[GIT PULL 0/3] Renesas ARM based SoC cleanups for v3.13

[Simon Horman]

Hi Kevin, Olof and Arnd,

please consider these Renesas ARM based SoC cleanups for v3.13.

This pull request is based on v3.12-rc1.


The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:

  Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.13

for you to fetch changes up to cde214a890f81797a5eee94fffc89c1de21ed991:

  ARM: shmobile: r8a7790: Constify platform data and resources (2013-09-19 14:33:44 -0700)

----------------------------------------------------------------
Renesas ARM based SoC cleanups for v3.13

* Constify platform data and resources of r8a7790 SoC
* Rename to r8a7790_init_delay() as r8a7790_init_early()
  - This is in preparation for doing more than just initialising the delay
* Rename r8a73a4_init_delay() as r8a73a4_init_early()
  - This is in preparation for doing more than just initialising the delay

----------------------------------------------------------------
Laurent Pinchart (1):
      ARM: shmobile: r8a7790: Constify platform data and resources

Magnus Damm (2):
      ARM: shmobile: Rename to r8a73a4_init_early()
      ARM: shmobile: Rename to r8a7790_init_early()

 arch/arm/mach-shmobile/board-ape6evm-reference.c |  2 +-
 arch/arm/mach-shmobile/board-ape6evm.c           |  2 +-
 arch/arm/mach-shmobile/board-lager-reference.c   |  2 +-
 arch/arm/mach-shmobile/board-lager.c             |  2 +-
 arch/arm/mach-shmobile/include/mach/r8a73a4.h    |  2 +-
 arch/arm/mach-shmobile/include/mach/r8a7790.h    |  2 +-
 arch/arm/mach-shmobile/setup-r8a73a4.c           |  4 ++--
 arch/arm/mach-shmobile/setup-r8a7790.c           | 25 ++++++++++++------------
 8 files changed, 21 insertions(+), 20 deletions(-)

[PATCH 1/3] ARM: shmobile: Rename to r8a73a4_init_early()

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Rename r8a73a4_init_delay() into r8a73a4_init_early()
to make the function name show that more than just
delay setup may happen in the future.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ape6evm-reference.c | 2 +-
 arch/arm/mach-shmobile/board-ape6evm.c           | 2 +-
 arch/arm/mach-shmobile/include/mach/r8a73a4.h    | 2 +-
 arch/arm/mach-shmobile/setup-r8a73a4.c           | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a23fa71..3276afc 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -57,7 +57,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 24b87eea..d36e23f 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -240,7 +240,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f3a9b70..5214338 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -5,6 +5,6 @@ void r8a73a4_add_standard_devices(void);
 void r8a73a4_add_dt_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
-void r8a73a4_init_delay(void);
+void r8a73a4_init_early(void);
 
 #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 8949170..53a8962 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -207,7 +207,7 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_thermal();
 }
 
-void __init r8a73a4_init_delay(void)
+void __init r8a73a4_init_early(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
@@ -222,7 +222,7 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.dt_compat	= r8a73a4_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
-- 
1.8.4

[PATCH 1/3] ARM: shmobile: Rename to r8a73a4_init_early()

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Rename r8a73a4_init_delay() into r8a73a4_init_early()
to make the function name show that more than just
delay setup may happen in the future.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ape6evm-reference.c | 2 +-
 arch/arm/mach-shmobile/board-ape6evm.c           | 2 +-
 arch/arm/mach-shmobile/include/mach/r8a73a4.h    | 2 +-
 arch/arm/mach-shmobile/setup-r8a73a4.c           | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
index a23fa71..3276afc 100644
--- a/arch/arm/mach-shmobile/board-ape6evm-reference.c
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -57,7 +57,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 24b87eea..d36e23f 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -240,7 +240,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f3a9b70..5214338 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -5,6 +5,6 @@ void r8a73a4_add_standard_devices(void);
 void r8a73a4_add_dt_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
-void r8a73a4_init_delay(void);
+void r8a73a4_init_early(void);
 
 #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 8949170..53a8962 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -207,7 +207,7 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_thermal();
 }
 
-void __init r8a73a4_init_delay(void)
+void __init r8a73a4_init_early(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
@@ -222,7 +222,7 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_early	= r8a73a4_init_delay,
+	.init_early	= r8a73a4_init_early,
 	.dt_compat	= r8a73a4_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
-- 
1.8.4

[PATCH 2/3] ARM: shmobile: Rename to r8a7790_init_early()

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Rename r8a7790_init_delay() into r8a7790_init_early()
to make the function name show that more than just
delay setup may happen in the future.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-lager-reference.c | 2 +-
 arch/arm/mach-shmobile/board-lager.c           | 2 +-
 arch/arm/mach-shmobile/include/mach/r8a7790.h  | 2 +-
 arch/arm/mach-shmobile/setup-r8a7790.c         | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 9c316a1..2856f51 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -38,7 +38,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_early	= r8a7790_init_delay,
+	.init_early	= r8a7790_init_early,
 	.init_machine	= lager_add_standard_devices,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index ffb6f0a..4047fac 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -161,7 +161,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_early	= r8a7790_init_delay,
+	.init_early	= r8a7790_init_early,
 	.init_time	= r8a7790_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.dt_compat	= lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 788d559..177a837 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -5,7 +5,7 @@ void r8a7790_add_standard_devices(void);
 void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
-void r8a7790_init_delay(void);
+void r8a7790_init_early(void);
 void r8a7790_timer_init(void);
 
 #define MD(nr) BIT(nr)
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index d0f5c9f..a42d1f6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -267,7 +267,7 @@ void __init r8a7790_timer_init(void)
 	clocksource_of_init();
 }
 
-void __init r8a7790_init_delay(void)
+void __init r8a7790_init_early(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
@@ -282,7 +282,7 @@ static const char *r8a7790_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_early	= r8a7790_init_delay,
+	.init_early	= r8a7790_init_early,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
-- 
1.8.4

[PATCH 2/3] ARM: shmobile: Rename to r8a7790_init_early()

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Rename r8a7790_init_delay() into r8a7790_init_early()
to make the function name show that more than just
delay setup may happen in the future.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-lager-reference.c | 2 +-
 arch/arm/mach-shmobile/board-lager.c           | 2 +-
 arch/arm/mach-shmobile/include/mach/r8a7790.h  | 2 +-
 arch/arm/mach-shmobile/setup-r8a7790.c         | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 9c316a1..2856f51 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -38,7 +38,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_early	= r8a7790_init_delay,
+	.init_early	= r8a7790_init_early,
 	.init_machine	= lager_add_standard_devices,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index ffb6f0a..4047fac 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -161,7 +161,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_early	= r8a7790_init_delay,
+	.init_early	= r8a7790_init_early,
 	.init_time	= r8a7790_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.dt_compat	= lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 788d559..177a837 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -5,7 +5,7 @@ void r8a7790_add_standard_devices(void);
 void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
-void r8a7790_init_delay(void);
+void r8a7790_init_early(void);
 void r8a7790_timer_init(void);
 
 #define MD(nr) BIT(nr)
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index d0f5c9f..a42d1f6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -267,7 +267,7 @@ void __init r8a7790_timer_init(void)
 	clocksource_of_init();
 }
 
-void __init r8a7790_init_delay(void)
+void __init r8a7790_init_early(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
@@ -282,7 +282,7 @@ static const char *r8a7790_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_early	= r8a7790_init_delay,
+	.init_early	= r8a7790_init_early,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
-- 
1.8.4

[PATCH 3/3] ARM: shmobile: r8a7790: Constify platform data and resources

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Platform data and resources for core devices are kmemdup()ed when the
corresponding devices are registered and can thus be declared as const.
Do so.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index a42d1f6..e0d29a2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -31,17 +31,18 @@
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static struct resource pfc_resources[] __initdata = {
+static const struct resource pfc_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
 
 #define R8A7790_GPIO(idx)						\
-static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
+static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
+static const struct gpio_rcar_config					\
+r8a7790_gpio##idx##_platform_data __initconst = {			\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
@@ -112,7 +113,7 @@ void __init r8a7790_pinmux_init(void)
 enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
        HSCIF0, HSCIF1 };
 
-static struct plat_sci_port scif[] __initdata = {
+static const struct plat_sci_port scif[] __initconst = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -131,11 +132,11 @@ static inline void r8a7790_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
-static struct renesas_irqc_config irqc0_data __initdata = {
+static const struct renesas_irqc_config irqc0_data __initconst = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };
 
-static struct resource irqc0_resources[] __initdata = {
+static const struct resource irqc0_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -150,7 +151,7 @@ static struct resource irqc0_resources[] __initdata = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
-static struct resource thermal_resources[] __initdata = {
+static const struct resource thermal_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61f0000, 0x14),
 	DEFINE_RES_MEM(0xe61f0100, 0x38),
 	DEFINE_RES_IRQ(gic_spi(69)),
@@ -161,13 +162,13 @@ static struct resource thermal_resources[] __initdata = {
 					thermal_resources,		\
 					ARRAY_SIZE(thermal_resources))
 
-static struct sh_timer_config cmt00_platform_data __initdata = {
+static const struct sh_timer_config cmt00_platform_data __initconst = {
 	.name = "CMT00",
 	.timer_bit = 0,
 	.clockevent_rating = 80,
 };
 
-static struct resource cmt00_resources[] __initdata = {
+static const struct resource cmt00_resources[] __initconst = {
 	DEFINE_RES_MEM(0xffca0510, 0x0c),
 	DEFINE_RES_MEM(0xffca0500, 0x04),
 	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
@@ -276,7 +277,7 @@ void __init r8a7790_init_early(void)
 
 #ifdef CONFIG_USE_OF
 
-static const char *r8a7790_boards_compat_dt[] __initdata = {
+static const char * const r8a7790_boards_compat_dt[] __initconst = {
 	"renesas,r8a7790",
 	NULL,
 };
-- 
1.8.4

[PATCH 3/3] ARM: shmobile: r8a7790: Constify platform data and resources

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Platform data and resources for core devices are kmemdup()ed when the
corresponding devices are registered and can thus be declared as const.
Do so.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index a42d1f6..e0d29a2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -31,17 +31,18 @@
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static struct resource pfc_resources[] __initdata = {
+static const struct resource pfc_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
 
 #define R8A7790_GPIO(idx)						\
-static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
+static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
+static const struct gpio_rcar_config					\
+r8a7790_gpio##idx##_platform_data __initconst = {			\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
@@ -112,7 +113,7 @@ void __init r8a7790_pinmux_init(void)
 enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
        HSCIF0, HSCIF1 };
 
-static struct plat_sci_port scif[] __initdata = {
+static const struct plat_sci_port scif[] __initconst = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -131,11 +132,11 @@ static inline void r8a7790_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
-static struct renesas_irqc_config irqc0_data __initdata = {
+static const struct renesas_irqc_config irqc0_data __initconst = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };
 
-static struct resource irqc0_resources[] __initdata = {
+static const struct resource irqc0_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -150,7 +151,7 @@ static struct resource irqc0_resources[] __initdata = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
-static struct resource thermal_resources[] __initdata = {
+static const struct resource thermal_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61f0000, 0x14),
 	DEFINE_RES_MEM(0xe61f0100, 0x38),
 	DEFINE_RES_IRQ(gic_spi(69)),
@@ -161,13 +162,13 @@ static struct resource thermal_resources[] __initdata = {
 					thermal_resources,		\
 					ARRAY_SIZE(thermal_resources))
 
-static struct sh_timer_config cmt00_platform_data __initdata = {
+static const struct sh_timer_config cmt00_platform_data __initconst = {
 	.name = "CMT00",
 	.timer_bit = 0,
 	.clockevent_rating = 80,
 };
 
-static struct resource cmt00_resources[] __initdata = {
+static const struct resource cmt00_resources[] __initconst = {
 	DEFINE_RES_MEM(0xffca0510, 0x0c),
 	DEFINE_RES_MEM(0xffca0500, 0x04),
 	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
@@ -276,7 +277,7 @@ void __init r8a7790_init_early(void)
 
 #ifdef CONFIG_USE_OF
 
-static const char *r8a7790_boards_compat_dt[] __initdata = {
+static const char * const r8a7790_boards_compat_dt[] __initconst = {
 	"renesas,r8a7790",
 	NULL,
 };
-- 
1.8.4

Re: [GIT PULL 0/3] Renesas ARM based SoC cleanups for v3.13

[Olof Johansson]

On Tue, Oct 01, 2013 at 11:28:01AM +0900, Simon Horman wrote:
> Hi Kevin, Olof and Arnd,
> 
> please consider these Renesas ARM based SoC cleanups for v3.13.
> 
> This pull request is based on v3.12-rc1.
> 
> 
> The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:
> 
>   Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.13

Pulled.

-Olof

[GIT PULL 0/3] Renesas ARM based SoC cleanups for v3.13

[Olof Johansson]

On Tue, Oct 01, 2013 at 11:28:01AM +0900, Simon Horman wrote:
> Hi Kevin, Olof and Arnd,
> 
> please consider these Renesas ARM based SoC cleanups for v3.13.
> 
> This pull request is based on v3.12-rc1.
> 
> 
> The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:
> 
>   Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.13

Pulled.

-Olof

[GIT PULL 0/3] Renesas ARM Based SoC Clean-Ups for v3.15

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

please consider these Renesas ARM Based SoC clean-ups for v3.15.


The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:

  Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.15

for you to fetch changes up to d24d1780c340777942061ef3445edcf228e8d35b:

  ARM: shmobile: emev2: Use __initconst for const init definition (2014-02-04 10:24:28 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Clean-Ups for v3.15

* Renesas SoCs (Global)
  - Remove duplicate shmobile_invalidate_start() declaration

* emev2 SoC (Emma Mobile)
  - Use __initconst for const init definition

* r8a7779 SoC (R-Car H1)
  - Remove unused clock constants

----------------------------------------------------------------
Geert Uytterhoeven (1):
      ARM: shmobile: Remove duplicate shmobile_invalidate_start() declaration

Simon Horman (2):
      ARM: shmobile: r8a7779: Remove unused clock constants
      ARM: shmobile: emev2: Use __initconst for const init definition

 arch/arm/mach-shmobile/clock-r8a7779.c       | 7 -------
 arch/arm/mach-shmobile/include/mach/common.h | 1 -
 arch/arm/mach-shmobile/setup-emev2.c         | 2 +-
 3 files changed, 1 insertion(+), 9 deletions(-)

[GIT PULL 0/3] Renesas ARM Based SoC Clean-Ups for v3.15

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

please consider these Renesas ARM Based SoC clean-ups for v3.15.


The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:

  Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.15

for you to fetch changes up to d24d1780c340777942061ef3445edcf228e8d35b:

  ARM: shmobile: emev2: Use __initconst for const init definition (2014-02-04 10:24:28 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC Clean-Ups for v3.15

* Renesas SoCs (Global)
  - Remove duplicate shmobile_invalidate_start() declaration

* emev2 SoC (Emma Mobile)
  - Use __initconst for const init definition

* r8a7779 SoC (R-Car H1)
  - Remove unused clock constants

----------------------------------------------------------------
Geert Uytterhoeven (1):
      ARM: shmobile: Remove duplicate shmobile_invalidate_start() declaration

Simon Horman (2):
      ARM: shmobile: r8a7779: Remove unused clock constants
      ARM: shmobile: emev2: Use __initconst for const init definition

 arch/arm/mach-shmobile/clock-r8a7779.c       | 7 -------
 arch/arm/mach-shmobile/include/mach/common.h | 1 -
 arch/arm/mach-shmobile/setup-emev2.c         | 2 +-
 3 files changed, 1 insertion(+), 9 deletions(-)

[PATCH 1/3] ARM: shmobile: Remove duplicate shmobile_invalidate_start() declaration

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e319805..cb8e32d 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -25,7 +25,6 @@ extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
 					    struct task_struct *idle);
 extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
-extern void shmobile_invalidate_start(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
-- 
1.8.5.2

[PATCH 1/3] ARM: shmobile: Remove duplicate shmobile_invalidate_start() declaration

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e319805..cb8e32d 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -25,7 +25,6 @@ extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
 					    struct task_struct *idle);
 extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
-extern void shmobile_invalidate_start(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
-- 
1.8.5.2

[PATCH 2/3] ARM: shmobile: r8a7779: Remove unused clock constants

[Simon Horman]

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/clock-r8a7779.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index f1fb89b..cabedeb 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -47,17 +47,10 @@
 
 #define MD(nr)	BIT(nr)
 
-#define FRQMR		IOMEM(0xffc80014)
 #define MSTPCR0		IOMEM(0xffc80030)
 #define MSTPCR1		IOMEM(0xffc80034)
 #define MSTPCR3		IOMEM(0xffc8003c)
 #define MSTPSR1		IOMEM(0xffc80044)
-#define MSTPSR4		IOMEM(0xffc80048)
-#define MSTPSR6		IOMEM(0xffc8004c)
-#define MSTPCR4		IOMEM(0xffc80050)
-#define MSTPCR5		IOMEM(0xffc80054)
-#define MSTPCR6		IOMEM(0xffc80058)
-#define MSTPCR7		IOMEM(0xffc80040)
 
 #define MODEMR		0xffcc0020
 
-- 
1.8.5.2

[PATCH 2/3] ARM: shmobile: r8a7779: Remove unused clock constants

[Simon Horman]

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/clock-r8a7779.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index f1fb89b..cabedeb 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -47,17 +47,10 @@
 
 #define MD(nr)	BIT(nr)
 
-#define FRQMR		IOMEM(0xffc80014)
 #define MSTPCR0		IOMEM(0xffc80030)
 #define MSTPCR1		IOMEM(0xffc80034)
 #define MSTPCR3		IOMEM(0xffc8003c)
 #define MSTPSR1		IOMEM(0xffc80044)
-#define MSTPSR4		IOMEM(0xffc80048)
-#define MSTPSR6		IOMEM(0xffc8004c)
-#define MSTPCR4		IOMEM(0xffc80050)
-#define MSTPCR5		IOMEM(0xffc80054)
-#define MSTPCR6		IOMEM(0xffc80058)
-#define MSTPCR7		IOMEM(0xffc80040)
 
 #define MODEMR		0xffcc0020
 
-- 
1.8.5.2

[PATCH 3/3] ARM: shmobile: emev2: Use __initconst for const init definition

[Simon Horman]

__initconst must be used instead of __initdata for
const init definitions.

This problem was introduced by 3d5de27174955702 ("mach-shmobile: Emma
Mobile EV2 DT support V3") in v3.4-rc7.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index c8f2a1a..c71d667 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -58,7 +58,7 @@ static void __init emev2_add_standard_devices_dt(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *emev2_boards_compat_dt[] __initdata = {
+static const char *emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
 	NULL,
 };
-- 
1.8.5.2

[PATCH 3/3] ARM: shmobile: emev2: Use __initconst for const init definition

[Simon Horman]

__initconst must be used instead of __initdata for
const init definitions.

This problem was introduced by 3d5de27174955702 ("mach-shmobile: Emma
Mobile EV2 DT support V3") in v3.4-rc7.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-emev2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index c8f2a1a..c71d667 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -58,7 +58,7 @@ static void __init emev2_add_standard_devices_dt(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static const char *emev2_boards_compat_dt[] __initdata = {
+static const char *emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
 	NULL,
 };
-- 
1.8.5.2

Re: [GIT PULL 0/3] Renesas ARM Based SoC Clean-Ups for v3.15

[Olof Johansson]

On Thu, Feb 06, 2014 at 03:20:06PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> please consider these Renesas ARM Based SoC clean-ups for v3.15.
> 
> 
> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
> 
>   Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.15
> 
> for you to fetch changes up to d24d1780c340777942061ef3445edcf228e8d35b:
> 
>   ARM: shmobile: emev2: Use __initconst for const init definition (2014-02-04 10:24:28 +0900)
> 
> ----------------------------------------------------------------
> Renesas ARM Based SoC Clean-Ups for v3.15
> 
> * Renesas SoCs (Global)
>   - Remove duplicate shmobile_invalidate_start() declaration
> 
> * emev2 SoC (Emma Mobile)
>   - Use __initconst for const init definition
> 
> * r8a7779 SoC (R-Car H1)
>   - Remove unused clock constants

Merged into next/cleanup.


Thanks,

-Olof

[GIT PULL 0/3] Renesas ARM Based SoC Clean-Ups for v3.15

[Olof Johansson]

On Thu, Feb 06, 2014 at 03:20:06PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> please consider these Renesas ARM Based SoC clean-ups for v3.15.
> 
> 
> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
> 
>   Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-cleanup-for-v3.15
> 
> for you to fetch changes up to d24d1780c340777942061ef3445edcf228e8d35b:
> 
>   ARM: shmobile: emev2: Use __initconst for const init definition (2014-02-04 10:24:28 +0900)
> 
> ----------------------------------------------------------------
> Renesas ARM Based SoC Clean-Ups for v3.15
> 
> * Renesas SoCs (Global)
>   - Remove duplicate shmobile_invalidate_start() declaration
> 
> * emev2 SoC (Emma Mobile)
>   - Use __initconst for const init definition
> 
> * r8a7779 SoC (R-Car H1)
>   - Remove unused clock constants

Merged into next/cleanup.


Thanks,

-Olof