[PATCH] PCI: imx6: fix imprecise abort handler

[PATCH] PCI: imx6: fix imprecise abort handler

[Tim Harvey]

An imprecise abort is triggered when a port behind a switch is accessed
and no device is present.  At enumeration, imprecise aborts are not enabled
thus this ends up getting deferred until the kernel has completed init.  At
that point we must not adjust PC - the handler must do nothing, but a handler
must exist.

This fixes random crashes that occur right after freeing init.
This is against linux-pci/host-imx6.

Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 drivers/pci/host/pci-imx6.c |    6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 966bac6..90fce05 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
 static int imx6q_pcie_abort_handler(unsigned long addr,
 		unsigned int fsr, struct pt_regs *regs)
 {
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
 	return 0;
 }
 
-- 
1.7.9.5

Re: [PATCH] PCI: imx6: fix imprecise abort handler

[Marek Vasut]

Dear Tim Harvey,

> An imprecise abort is triggered when a port behind a switch is accessed
> and no device is present.  At enumeration, imprecise aborts are not enabled
> thus this ends up getting deferred until the kernel has completed init.  At
> that point we must not adjust PC - the handler must do nothing, but a
> handler must exist.
> 
> This fixes random crashes that occur right after freeing init.
> This is against linux-pci/host-imx6.
> 
> Acked-by: Marek Vasut <marex@denx.de>
> Tested-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Expanding CC a bit, let's have more eyes on this.

> ---
>  drivers/pci/host/pci-imx6.c |    6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index 966bac6..90fce05 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *dbi_base, int
> addr, int data) static int imx6q_pcie_abort_handler(unsigned long addr,
>  		unsigned int fsr, struct pt_regs *regs)
>  {
> -	/*
> -	 * If it was an imprecise abort, then we need to correct the
> -	 * return address to be _after_ the instruction.
> -	 */
> -	if (fsr & (1 << 10))
> -		regs->ARM_pc += 4;
>  	return 0;
>  }

Best regards,
Marek Vasut

[PATCH] PCI: imx6: fix imprecise abort handler

[Marek Vasut]

Dear Tim Harvey,

> An imprecise abort is triggered when a port behind a switch is accessed
> and no device is present.  At enumeration, imprecise aborts are not enabled
> thus this ends up getting deferred until the kernel has completed init.  At
> that point we must not adjust PC - the handler must do nothing, but a
> handler must exist.
> 
> This fixes random crashes that occur right after freeing init.
> This is against linux-pci/host-imx6.
> 
> Acked-by: Marek Vasut <marex@denx.de>
> Tested-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Expanding CC a bit, let's have more eyes on this.

> ---
>  drivers/pci/host/pci-imx6.c |    6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index 966bac6..90fce05 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *dbi_base, int
> addr, int data) static int imx6q_pcie_abort_handler(unsigned long addr,
>  		unsigned int fsr, struct pt_regs *regs)
>  {
> -	/*
> -	 * If it was an imprecise abort, then we need to correct the
> -	 * return address to be _after_ the instruction.
> -	 */
> -	if (fsr & (1 << 10))
> -		regs->ARM_pc += 4;
>  	return 0;
>  }

Best regards,
Marek Vasut

Re: [PATCH] PCI: imx6: fix imprecise abort handler

[Shawn Guo]

On Sat, Oct 19, 2013 at 03:33:52AM +0200, Marek Vasut wrote:
> Dear Tim Harvey,
> 
> > An imprecise abort is triggered when a port behind a switch is accessed
> > and no device is present.  At enumeration, imprecise aborts are not enabled
> > thus this ends up getting deferred until the kernel has completed init.  At
> > that point we must not adjust PC - the handler must do nothing, but a
> > handler must exist.
> > 
> > This fixes random crashes that occur right after freeing init.
> > This is against linux-pci/host-imx6.
> > 
> > Acked-by: Marek Vasut <marex@denx.de>
> > Tested-by: Marek Vasut <marex@denx.de>
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> 
> Expanding CC a bit, let's have more eyes on this.
> 

Acked-by: Shawn Guo <shawn.guo@linaro.org>

[PATCH] PCI: imx6: fix imprecise abort handler

[Shawn Guo]

On Sat, Oct 19, 2013 at 03:33:52AM +0200, Marek Vasut wrote:
> Dear Tim Harvey,
> 
> > An imprecise abort is triggered when a port behind a switch is accessed
> > and no device is present.  At enumeration, imprecise aborts are not enabled
> > thus this ends up getting deferred until the kernel has completed init.  At
> > that point we must not adjust PC - the handler must do nothing, but a
> > handler must exist.
> > 
> > This fixes random crashes that occur right after freeing init.
> > This is against linux-pci/host-imx6.
> > 
> > Acked-by: Marek Vasut <marex@denx.de>
> > Tested-by: Marek Vasut <marex@denx.de>
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> 
> Expanding CC a bit, let's have more eyes on this.
> 

Acked-by: Shawn Guo <shawn.guo@linaro.org>

Re: [PATCH] PCI: imx6: fix imprecise abort handler

[Bjorn Helgaas]

On Mon, Oct 21, 2013 at 2:16 AM, Pratyush Anand
<pratyush.anand@gmail.com> wrote:
> Hi,
>
> On Sat, Oct 19, 2013 at 7:03 AM, Marek Vasut <marex@denx.de> wrote:
>>
>> Dear Tim Harvey,
>>
>> > An imprecise abort is triggered when a port behind a switch is accessed
>> > and no device is present.  At enumeration, imprecise aborts are not
>> > enabled
>
>
>
> I do not know the complete history. But I do not understand, why
> imprecise aborts are not enabled during kernel enumeration.
> What happens when PCIe switch is already connected before boot?
> pci_common_init will try to read vendor/product ID for a non-existing
> function during kernel enumeration itself, which should result in imprecise
> external abort. In fact, I had observed with my system that if a switch is
> connected to PCIe RC, then abort occurs during kernel initialization itself.
> So a proper handling was needed. We called hook_fault_code from
> a subsys_init pcie_init (or similar) function, which insured that abort
> handler is called whenever, software tries to read vendor/product id of
> a non-existing function
>
>>
>> > thus this ends up getting deferred until the kernel has completed init.
>> > At
>> > that point we must not adjust PC - the handler must do nothing, but a
>> > handler must exist.
>> >
>> > This fixes random crashes that occur right after freeing init.
>> > This is against linux-pci/host-imx6.
>> >
>> > Acked-by: Marek Vasut <marex@denx.de>
>> > Tested-by: Marek Vasut <marex@denx.de>
>> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
>>
>> Expanding CC a bit, let's have more eyes on this.
>>
>> > ---
>> >  drivers/pci/host/pci-imx6.c |    6 ------
>> >  1 file changed, 6 deletions(-)
>> >
>> > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
>> > index 966bac6..90fce05 100644
>> > --- a/drivers/pci/host/pci-imx6.c
>> > +++ b/drivers/pci/host/pci-imx6.c
>> > @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *dbi_base,
>> > int
>> > addr, int data) static int imx6q_pcie_abort_handler(unsigned long addr,
>> >               unsigned int fsr, struct pt_regs *regs)
>> >  {
>> > -     /*
>> > -      * If it was an imprecise abort, then we need to correct the
>> > -      * return address to be _after_ the instruction.
>> > -      */
>> > -     if (fsr & (1 << 10))
>> > -             regs->ARM_pc += 4;
>
>
> Just for knowledge, is there any case other than read of IDs which might
> cause imprecise abort? If not, then this handler can be modified a bit to
> insure
> that it does not handle any unintended imprecise abort.
>
> Regards
> Pratyush
>
>>
>> >       return 0;
>> >  }

I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
it seems like it assumes that imprecise aborts are either enabled or
disabled.  Isn't there some way it can *check* whether that's the
case, so it won't break if those aborts are enabled at a different
point in the future?

For now, I'll apply this to my pci/host-imx6 branch for v3.13, but let
me know if you want to tweak it somehow.

Bjorn

[PATCH] PCI: imx6: fix imprecise abort handler

[Bjorn Helgaas]

On Mon, Oct 21, 2013 at 2:16 AM, Pratyush Anand
<pratyush.anand@gmail.com> wrote:
> Hi,
>
> On Sat, Oct 19, 2013 at 7:03 AM, Marek Vasut <marex@denx.de> wrote:
>>
>> Dear Tim Harvey,
>>
>> > An imprecise abort is triggered when a port behind a switch is accessed
>> > and no device is present.  At enumeration, imprecise aborts are not
>> > enabled
>
>
>
> I do not know the complete history. But I do not understand, why
> imprecise aborts are not enabled during kernel enumeration.
> What happens when PCIe switch is already connected before boot?
> pci_common_init will try to read vendor/product ID for a non-existing
> function during kernel enumeration itself, which should result in imprecise
> external abort. In fact, I had observed with my system that if a switch is
> connected to PCIe RC, then abort occurs during kernel initialization itself.
> So a proper handling was needed. We called hook_fault_code from
> a subsys_init pcie_init (or similar) function, which insured that abort
> handler is called whenever, software tries to read vendor/product id of
> a non-existing function
>
>>
>> > thus this ends up getting deferred until the kernel has completed init.
>> > At
>> > that point we must not adjust PC - the handler must do nothing, but a
>> > handler must exist.
>> >
>> > This fixes random crashes that occur right after freeing init.
>> > This is against linux-pci/host-imx6.
>> >
>> > Acked-by: Marek Vasut <marex@denx.de>
>> > Tested-by: Marek Vasut <marex@denx.de>
>> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
>>
>> Expanding CC a bit, let's have more eyes on this.
>>
>> > ---
>> >  drivers/pci/host/pci-imx6.c |    6 ------
>> >  1 file changed, 6 deletions(-)
>> >
>> > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
>> > index 966bac6..90fce05 100644
>> > --- a/drivers/pci/host/pci-imx6.c
>> > +++ b/drivers/pci/host/pci-imx6.c
>> > @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *dbi_base,
>> > int
>> > addr, int data) static int imx6q_pcie_abort_handler(unsigned long addr,
>> >               unsigned int fsr, struct pt_regs *regs)
>> >  {
>> > -     /*
>> > -      * If it was an imprecise abort, then we need to correct the
>> > -      * return address to be _after_ the instruction.
>> > -      */
>> > -     if (fsr & (1 << 10))
>> > -             regs->ARM_pc += 4;
>
>
> Just for knowledge, is there any case other than read of IDs which might
> cause imprecise abort? If not, then this handler can be modified a bit to
> insure
> that it does not handle any unintended imprecise abort.
>
> Regards
> Pratyush
>
>>
>> >       return 0;
>> >  }

I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
it seems like it assumes that imprecise aborts are either enabled or
disabled.  Isn't there some way it can *check* whether that's the
case, so it won't break if those aborts are enabled at a different
point in the future?

For now, I'll apply this to my pci/host-imx6 branch for v3.13, but let
me know if you want to tweak it somehow.

Bjorn

Re: [PATCH] PCI: imx6: fix imprecise abort handler

[Marek Vasut]

Dear Bjorn Helgaas,

> On Mon, Oct 21, 2013 at 2:16 AM, Pratyush Anand
> 
> <pratyush.anand@gmail.com> wrote:
> > Hi,
> > 
> > On Sat, Oct 19, 2013 at 7:03 AM, Marek Vasut <marex@denx.de> wrote:
> >> Dear Tim Harvey,
> >> 
> >> > An imprecise abort is triggered when a port behind a switch is
> >> > accessed and no device is present.  At enumeration, imprecise aborts
> >> > are not enabled
> > 
> > I do not know the complete history. But I do not understand, why
> > imprecise aborts are not enabled during kernel enumeration.
> > What happens when PCIe switch is already connected before boot?
> > pci_common_init will try to read vendor/product ID for a non-existing
> > function during kernel enumeration itself, which should result in
> > imprecise external abort. In fact, I had observed with my system that if
> > a switch is connected to PCIe RC, then abort occurs during kernel
> > initialization itself. So a proper handling was needed. We called
> > hook_fault_code from
> > a subsys_init pcie_init (or similar) function, which insured that abort
> > handler is called whenever, software tries to read vendor/product id of
> > a non-existing function
> > 
> >> > thus this ends up getting deferred until the kernel has completed
> >> > init. At
> >> > that point we must not adjust PC - the handler must do nothing, but a
> >> > handler must exist.
> >> > 
> >> > This fixes random crashes that occur right after freeing init.
> >> > This is against linux-pci/host-imx6.
> >> > 
> >> > Acked-by: Marek Vasut <marex@denx.de>
> >> > Tested-by: Marek Vasut <marex@denx.de>
> >> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> >> 
> >> Expanding CC a bit, let's have more eyes on this.
> >> 
> >> > ---
> >> > 
> >> >  drivers/pci/host/pci-imx6.c |    6 ------
> >> >  1 file changed, 6 deletions(-)
> >> > 
> >> > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> >> > index 966bac6..90fce05 100644
> >> > --- a/drivers/pci/host/pci-imx6.c
> >> > +++ b/drivers/pci/host/pci-imx6.c
> >> > @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *dbi_base,
> >> > int
> >> > addr, int data) static int imx6q_pcie_abort_handler(unsigned long
> >> > addr,
> >> > 
> >> >               unsigned int fsr, struct pt_regs *regs)
> >> >  
> >> >  {
> >> > 
> >> > -     /*
> >> > -      * If it was an imprecise abort, then we need to correct the
> >> > -      * return address to be _after_ the instruction.
> >> > -      */
> >> > -     if (fsr & (1 << 10))
> >> > -             regs->ARM_pc += 4;
> > 
> > Just for knowledge, is there any case other than read of IDs which might
> > cause imprecise abort? If not, then this handler can be modified a bit to
> > insure
> > that it does not handle any unintended imprecise abort.
> > 
> > Regards
> > Pratyush
> > 
> >> >       return 0;
> >> >  
> >> >  }
> 
> I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
> it seems like it assumes that imprecise aborts are either enabled or
> disabled.  Isn't there some way it can *check* whether that's the
> case, so it won't break if those aborts are enabled at a different
> point in the future?

The best way here would be to find a way to prevent the DWC controller from 
generating data abort on missing device _at_all_ and just make the read from 
that portion of config space be 0xffffffff or zeroes . I didn't find any 
configuration bit that would be able to do it though :( Richard, can you maybe 
check with FSL if such an option exists on the controller?

> For now, I'll apply this to my pci/host-imx6 branch for v3.13, but let
> me know if you want to tweak it somehow.
> 
> Bjorn

[PATCH] PCI: imx6: fix imprecise abort handler

[Marek Vasut]

Dear Bjorn Helgaas,

> On Mon, Oct 21, 2013 at 2:16 AM, Pratyush Anand
> 
> <pratyush.anand@gmail.com> wrote:
> > Hi,
> > 
> > On Sat, Oct 19, 2013 at 7:03 AM, Marek Vasut <marex@denx.de> wrote:
> >> Dear Tim Harvey,
> >> 
> >> > An imprecise abort is triggered when a port behind a switch is
> >> > accessed and no device is present.  At enumeration, imprecise aborts
> >> > are not enabled
> > 
> > I do not know the complete history. But I do not understand, why
> > imprecise aborts are not enabled during kernel enumeration.
> > What happens when PCIe switch is already connected before boot?
> > pci_common_init will try to read vendor/product ID for a non-existing
> > function during kernel enumeration itself, which should result in
> > imprecise external abort. In fact, I had observed with my system that if
> > a switch is connected to PCIe RC, then abort occurs during kernel
> > initialization itself. So a proper handling was needed. We called
> > hook_fault_code from
> > a subsys_init pcie_init (or similar) function, which insured that abort
> > handler is called whenever, software tries to read vendor/product id of
> > a non-existing function
> > 
> >> > thus this ends up getting deferred until the kernel has completed
> >> > init. At
> >> > that point we must not adjust PC - the handler must do nothing, but a
> >> > handler must exist.
> >> > 
> >> > This fixes random crashes that occur right after freeing init.
> >> > This is against linux-pci/host-imx6.
> >> > 
> >> > Acked-by: Marek Vasut <marex@denx.de>
> >> > Tested-by: Marek Vasut <marex@denx.de>
> >> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> >> 
> >> Expanding CC a bit, let's have more eyes on this.
> >> 
> >> > ---
> >> > 
> >> >  drivers/pci/host/pci-imx6.c |    6 ------
> >> >  1 file changed, 6 deletions(-)
> >> > 
> >> > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> >> > index 966bac6..90fce05 100644
> >> > --- a/drivers/pci/host/pci-imx6.c
> >> > +++ b/drivers/pci/host/pci-imx6.c
> >> > @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *dbi_base,
> >> > int
> >> > addr, int data) static int imx6q_pcie_abort_handler(unsigned long
> >> > addr,
> >> > 
> >> >               unsigned int fsr, struct pt_regs *regs)
> >> >  
> >> >  {
> >> > 
> >> > -     /*
> >> > -      * If it was an imprecise abort, then we need to correct the
> >> > -      * return address to be _after_ the instruction.
> >> > -      */
> >> > -     if (fsr & (1 << 10))
> >> > -             regs->ARM_pc += 4;
> > 
> > Just for knowledge, is there any case other than read of IDs which might
> > cause imprecise abort? If not, then this handler can be modified a bit to
> > insure
> > that it does not handle any unintended imprecise abort.
> > 
> > Regards
> > Pratyush
> > 
> >> >       return 0;
> >> >  
> >> >  }
> 
> I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
> it seems like it assumes that imprecise aborts are either enabled or
> disabled.  Isn't there some way it can *check* whether that's the
> case, so it won't break if those aborts are enabled at a different
> point in the future?

The best way here would be to find a way to prevent the DWC controller from 
generating data abort on missing device _at_all_ and just make the read from 
that portion of config space be 0xffffffff or zeroes . I didn't find any 
configuration bit that would be able to do it though :( Richard, can you maybe 
check with FSL if such an option exists on the controller?

> For now, I'll apply this to my pci/host-imx6 branch for v3.13, but let
> me know if you want to tweak it somehow.
> 
> Bjorn

RE: [PATCH] PCI: imx6: fix imprecise abort handler

[Richard Zhu]

Hi Marek:

> -----Original Message-----
> From: Marek Vasut [mailto:marex@denx.de]
> Sent: Wednesday, October 30, 2013 10:55 PM
> To: Bjorn Helgaas
> Cc: Pratyush Anand; Tim Harvey; linux-pci@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; Sascha Hauer; Zhu Richard-R65037; Shawn Guo;
> Jingoo Han; Pratyush Anand; Troy Kisky
> Subject: Re: [PATCH] PCI: imx6: fix imprecise abort handler
> 
> Dear Bjorn Helgaas,
> 
> > On Mon, Oct 21, 2013 at 2:16 AM, Pratyush Anand
> >
> > <pratyush.anand@gmail.com> wrote:
> > > Hi,
> > >
> > > On Sat, Oct 19, 2013 at 7:03 AM, Marek Vasut <marex@denx.de> wrote:
> > >> Dear Tim Harvey,
> > >>
> > >> > An imprecise abort is triggered when a port behind a switch is
> > >> > accessed and no device is present.  At enumeration, imprecise
> > >> > aborts are not enabled
> > >
> > > I do not know the complete history. But I do not understand, why
> > > imprecise aborts are not enabled during kernel enumeration.
> > > What happens when PCIe switch is already connected before boot?
> > > pci_common_init will try to read vendor/product ID for a
> > > non-existing function during kernel enumeration itself, which should
> > > result in imprecise external abort. In fact, I had observed with my
> > > system that if a switch is connected to PCIe RC, then abort occurs
> > > during kernel initialization itself. So a proper handling was
> > > needed. We called hook_fault_code from a subsys_init pcie_init (or
> > > similar) function, which insured that abort handler is called
> > > whenever, software tries to read vendor/product id of a non-existing
> > > function
> > >
> > >> > thus this ends up getting deferred until the kernel has completed
> > >> > init. At that point we must not adjust PC - the handler must do
> > >> > nothing, but a handler must exist.
> > >> >
> > >> > This fixes random crashes that occur right after freeing init.
> > >> > This is against linux-pci/host-imx6.
> > >> >
> > >> > Acked-by: Marek Vasut <marex@denx.de>
> > >> > Tested-by: Marek Vasut <marex@denx.de>
> > >> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> > >>
> > >> Expanding CC a bit, let's have more eyes on this.
> > >>
> > >> > ---
> > >> >
> > >> >  drivers/pci/host/pci-imx6.c |    6 ------
> > >> >  1 file changed, 6 deletions(-)
> > >> >
> > >> > diff --git a/drivers/pci/host/pci-imx6.c
> > >> > b/drivers/pci/host/pci-imx6.c index 966bac6..90fce05 100644
> > >> > --- a/drivers/pci/host/pci-imx6.c
> > >> > +++ b/drivers/pci/host/pci-imx6.c
> > >> > @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem
> > >> > *dbi_base, int addr, int data) static int
> > >> > imx6q_pcie_abort_handler(unsigned long addr,
> > >> >
> > >> >               unsigned int fsr, struct pt_regs *regs)
> > >> >
> > >> >  {
> > >> >
> > >> > -     /*
> > >> > -      * If it was an imprecise abort, then we need to correct the
> > >> > -      * return address to be _after_ the instruction.
> > >> > -      */
> > >> > -     if (fsr & (1 << 10))
> > >> > -             regs->ARM_pc += 4;
> > >
> > > Just for knowledge, is there any case other than read of IDs which
> > > might cause imprecise abort? If not, then this handler can be
> > > modified a bit to insure that it does not handle any unintended
> > > imprecise abort.
> > >
> > > Regards
> > > Pratyush
> > >
> > >> >       return 0;
> > >> >
> > >> >  }
> >
> > I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
> > it seems like it assumes that imprecise aborts are either enabled or
> > disabled.  Isn't there some way it can *check* whether that's the
> > case, so it won't break if those aborts are enabled at a different
> > point in the future?
> 
> The best way here would be to find a way to prevent the DWC controller from
> generating data abort on missing device _at_all_ and just make the read from
> that portion of config space be 0xffffffff or zeroes . I didn't find any
> configuration bit that would be able to do it though :( Richard, can you maybe
> check with FSL if such an option exists on the controller?
> 
[Richard] Unfortunately, discussed with IC guys, there is no such kind of mechanism.

> > For now, I'll apply this to my pci/host-imx6 branch for v3.13, but let
> > me know if you want to tweak it somehow.
> >
> > Bjorn

[PATCH] PCI: imx6: fix imprecise abort handler

[Richard Zhu]

Hi Marek:

> -----Original Message-----
> From: Marek Vasut [mailto:marex at denx.de]
> Sent: Wednesday, October 30, 2013 10:55 PM
> To: Bjorn Helgaas
> Cc: Pratyush Anand; Tim Harvey; linux-pci at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; Sascha Hauer; Zhu Richard-R65037; Shawn Guo;
> Jingoo Han; Pratyush Anand; Troy Kisky
> Subject: Re: [PATCH] PCI: imx6: fix imprecise abort handler
> 
> Dear Bjorn Helgaas,
> 
> > On Mon, Oct 21, 2013 at 2:16 AM, Pratyush Anand
> >
> > <pratyush.anand@gmail.com> wrote:
> > > Hi,
> > >
> > > On Sat, Oct 19, 2013 at 7:03 AM, Marek Vasut <marex@denx.de> wrote:
> > >> Dear Tim Harvey,
> > >>
> > >> > An imprecise abort is triggered when a port behind a switch is
> > >> > accessed and no device is present.  At enumeration, imprecise
> > >> > aborts are not enabled
> > >
> > > I do not know the complete history. But I do not understand, why
> > > imprecise aborts are not enabled during kernel enumeration.
> > > What happens when PCIe switch is already connected before boot?
> > > pci_common_init will try to read vendor/product ID for a
> > > non-existing function during kernel enumeration itself, which should
> > > result in imprecise external abort. In fact, I had observed with my
> > > system that if a switch is connected to PCIe RC, then abort occurs
> > > during kernel initialization itself. So a proper handling was
> > > needed. We called hook_fault_code from a subsys_init pcie_init (or
> > > similar) function, which insured that abort handler is called
> > > whenever, software tries to read vendor/product id of a non-existing
> > > function
> > >
> > >> > thus this ends up getting deferred until the kernel has completed
> > >> > init. At that point we must not adjust PC - the handler must do
> > >> > nothing, but a handler must exist.
> > >> >
> > >> > This fixes random crashes that occur right after freeing init.
> > >> > This is against linux-pci/host-imx6.
> > >> >
> > >> > Acked-by: Marek Vasut <marex@denx.de>
> > >> > Tested-by: Marek Vasut <marex@denx.de>
> > >> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> > >>
> > >> Expanding CC a bit, let's have more eyes on this.
> > >>
> > >> > ---
> > >> >
> > >> >  drivers/pci/host/pci-imx6.c |    6 ------
> > >> >  1 file changed, 6 deletions(-)
> > >> >
> > >> > diff --git a/drivers/pci/host/pci-imx6.c
> > >> > b/drivers/pci/host/pci-imx6.c index 966bac6..90fce05 100644
> > >> > --- a/drivers/pci/host/pci-imx6.c
> > >> > +++ b/drivers/pci/host/pci-imx6.c
> > >> > @@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem
> > >> > *dbi_base, int addr, int data) static int
> > >> > imx6q_pcie_abort_handler(unsigned long addr,
> > >> >
> > >> >               unsigned int fsr, struct pt_regs *regs)
> > >> >
> > >> >  {
> > >> >
> > >> > -     /*
> > >> > -      * If it was an imprecise abort, then we need to correct the
> > >> > -      * return address to be _after_ the instruction.
> > >> > -      */
> > >> > -     if (fsr & (1 << 10))
> > >> > -             regs->ARM_pc += 4;
> > >
> > > Just for knowledge, is there any case other than read of IDs which
> > > might cause imprecise abort? If not, then this handler can be
> > > modified a bit to insure that it does not handle any unintended
> > > imprecise abort.
> > >
> > > Regards
> > > Pratyush
> > >
> > >> >       return 0;
> > >> >
> > >> >  }
> >
> > I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
> > it seems like it assumes that imprecise aborts are either enabled or
> > disabled.  Isn't there some way it can *check* whether that's the
> > case, so it won't break if those aborts are enabled at a different
> > point in the future?
> 
> The best way here would be to find a way to prevent the DWC controller from
> generating data abort on missing device _at_all_ and just make the read from
> that portion of config space be 0xffffffff or zeroes . I didn't find any
> configuration bit that would be able to do it though :( Richard, can you maybe
> check with FSL if such an option exists on the controller?
> 
[Richard] Unfortunately, discussed with IC guys, there is no such kind of mechanism.

> > For now, I'll apply this to my pci/host-imx6 branch for v3.13, but let
> > me know if you want to tweak it somehow.
> >
> > Bjorn

Re: [PATCH] PCI: imx6: fix imprecise abort handler

[Marek Vasut]

Hi Richard,

[...]

> > > I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
> > > it seems like it assumes that imprecise aborts are either enabled or
> > > disabled.  Isn't there some way it can *check* whether that's the
> > > case, so it won't break if those aborts are enabled at a different
> > > point in the future?
> > 
> > The best way here would be to find a way to prevent the DWC controller
> > from generating data abort on missing device _at_all_ and just make the
> > read from that portion of config space be 0xffffffff or zeroes . I
> > didn't find any configuration bit that would be able to do it though :(
> > Richard, can you maybe check with FSL if such an option exists on the
> > controller?
> 
> [Richard] Unfortunately, discussed with IC guys, there is no such kind of
> mechanism.

Do you know or can you please check if there's at least some mechanism to detect 
whether the data abort was generated by the DWC PCIe or something else ?

Best regards,
Marek Vasut

[PATCH] PCI: imx6: fix imprecise abort handler

[Marek Vasut]

Hi Richard,

[...]

> > > I'm sort of dubious about imx6q_pcie_abort_handler() to begin with --
> > > it seems like it assumes that imprecise aborts are either enabled or
> > > disabled.  Isn't there some way it can *check* whether that's the
> > > case, so it won't break if those aborts are enabled at a different
> > > point in the future?
> > 
> > The best way here would be to find a way to prevent the DWC controller
> > from generating data abort on missing device _at_all_ and just make the
> > read from that portion of config space be 0xffffffff or zeroes . I
> > didn't find any configuration bit that would be able to do it though :(
> > Richard, can you maybe check with FSL if such an option exists on the
> > controller?
> 
> [Richard] Unfortunately, discussed with IC guys, there is no such kind of
> mechanism.

Do you know or can you please check if there's at least some mechanism to detect 
whether the data abort was generated by the DWC PCIe or something else ?

Best regards,
Marek Vasut