* [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support.
@ 2013-11-12 11:24 ` Denis Carikli
0 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Steffen Trumtrar, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Russell King,
Eric Bénard, Uwe Kleine-König, Denis Carikli
From: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v7->v8:
- Splitted out the dts part.
- The commit message was updated accordingly.
- clk_max was removed from the documentation.
- status = "disabled"; was removed from the dts examples in the documentation.
- The imx35 pinctrl driver selection in Kconfig was splitted out.
- Some unused variables were removed from mx35_clocks_init_dt in clk-imx35.c
ChangeLog v6->v7:
- Added Grant Likely in the Cc list.
- Added imx35-pingrp.h, and converted the rest of the patch to use it.
- lcdc pads were moved from the dtsi into another commit.
- A whitespace issue in the dtsi was removed.
ChangeLog v5->v6:
- The dependency on pdata clocks has been removed,
and the dtsi adapted accordinly.
- Adaptation to the for-next branch of Shawn Guo at
git://git.linaro.org/people/shawnguo/linux-2.6.git for-next
- imx35-dt.c: very small whitespace cleanup.
- Kconfig: The selection of IMX_HAVE_PLATFORM_* has been removed.
- dtsi: The nodes were reordered alphabetically.
- dtsi: The aliases have been reordered alphabetically.
- Shawn Guo was added in the Cc.
---
.../devicetree/bindings/clock/imx35-clock.txt | 113 ++++++++++++++++++++
arch/arm/mach-imx/Kconfig | 7 ++
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/clk-imx35.c | 16 +++
arch/arm/mach-imx/common.h | 1 +
arch/arm/mach-imx/imx35-dt.c | 48 +++++++++
6 files changed, 186 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
create mode 100644 arch/arm/mach-imx/imx35-dt.c
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt
new file mode 100644
index 0000000..a703564
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt
@@ -0,0 +1,113 @@
+* Clock bindings for Freescale i.MX35
+
+Required properties:
+- compatible: Should be "fsl,imx35-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX35
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ ckih 0
+ mpll 1
+ ppll 2
+ mpll_075 3
+ arm 4
+ hsp 5
+ hsp_div 6
+ hsp_sel 7
+ ahb 8
+ ipg 9
+ arm_per_div 10
+ ahb_per_div 11
+ ipg_per 12
+ uart_sel 13
+ uart_div 14
+ esdhc_sel 15
+ esdhc1_div 16
+ esdhc2_div 17
+ esdhc3_div 18
+ spdif_sel 19
+ spdif_div_pre 20
+ spdif_div_post 21
+ ssi_sel 22
+ ssi1_div_pre 23
+ ssi1_div_post 24
+ ssi2_div_pre 25
+ ssi2_div_post 26
+ usb_sel 27
+ usb_div 28
+ nfc_div 29
+ asrc_gate 30
+ pata_gate 31
+ audmux_gate 32
+ can1_gate 33
+ can2_gate 34
+ cspi1_gate 35
+ cspi2_gate 36
+ ect_gate 37
+ edio_gate 38
+ emi_gate 39
+ epit1_gate 40
+ epit2_gate 41
+ esai_gate 42
+ esdhc1_gate 43
+ esdhc2_gate 44
+ esdhc3_gate 45
+ fec_gate 46
+ gpio1_gate 47
+ gpio2_gate 48
+ gpio3_gate 49
+ gpt_gate 50
+ i2c1_gate 51
+ i2c2_gate 52
+ i2c3_gate 53
+ iomuxc_gate 54
+ ipu_gate 55
+ kpp_gate 56
+ mlb_gate 57
+ mshc_gate 58
+ owire_gate 59
+ pwm_gate 60
+ rngc_gate 61
+ rtc_gate 62
+ rtic_gate 63
+ scc_gate 64
+ sdma_gate 65
+ spba_gate 66
+ spdif_gate 67
+ ssi1_gate 68
+ ssi2_gate 69
+ uart1_gate 70
+ uart2_gate 71
+ uart3_gate 72
+ usbotg_gate 73
+ wdog_gate 74
+ max_gate 75
+ admux_gate 76
+ csi_gate 77
+ csi_div 78
+ csi_sel 79
+ iim_gate 80
+ gpu2d_gate 81
+
+Examples:
+
+clks: ccm@53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+};
+
+esdhc1: esdhc@53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8f6ce05..36014e2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -611,6 +611,13 @@ config MACH_IMX31_DT
comment "MX35 platforms:"
+config MACH_IMX35_DT
+ bool "Support i.MX35 platforms from device tree"
+ select SOC_IMX35
+ help
+ Include support for Freescale i.MX35 based platforms
+ using the device tree for discovery.
+
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select IMX_HAVE_PLATFORM_FLEXCAN
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 0db1697..befcaf5 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 2193c83..9ef3c55 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -45,6 +45,8 @@ static struct arm_ahb_div clk_consumer[] = {
static char hsp_div_532[] = { 4, 8, 3, 0 };
static char hsp_div_400[] = { 3, 6, 3, 0 };
+static struct clk_onecell_data clk_data;
+
static const char *std_sel[] = {"ppll", "arm"};
static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
@@ -286,3 +288,17 @@ int __init mx35_clocks_init(void)
return 0;
}
+
+int __init mx35_clocks_init_dt(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm");
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ mx35_clocks_init();
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 59c3b9b..6919b7d 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -65,6 +65,7 @@ int mx35_clocks_init(void);
int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
int mx25_clocks_init_dt(void);
+int mx35_clocks_init_dt(void);
int mx27_clocks_init_dt(void);
int mx31_clocks_init_dt(void);
struct platform_device *mxc_register_gpio(char *name, int id,
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
new file mode 100644
index 0000000..e3def45
--- /dev/null
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27-dt.c
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "mx35.h"
+
+static void __init imx35_dt_init(void)
+{
+ mxc_arch_reset_init_dt();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+}
+
+static void __init imx35_timer_init(void)
+{
+ mx35_clocks_init_dt();
+}
+
+static const char *imx35_dt_board_compat[] __initdata = {
+ "fsl,imx35",
+ NULL
+};
+
+DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
+ .map_io = mx35_map_io,
+ .init_early = imx35_init_early,
+ .init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
+ .init_time = imx35_timer_init,
+ .init_machine = imx35_dt_init,
+ .dt_compat = imx35_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support.
@ 2013-11-12 11:24 ` Denis Carikli
0 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree at vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v7->v8:
- Splitted out the dts part.
- The commit message was updated accordingly.
- clk_max was removed from the documentation.
- status = "disabled"; was removed from the dts examples in the documentation.
- The imx35 pinctrl driver selection in Kconfig was splitted out.
- Some unused variables were removed from mx35_clocks_init_dt in clk-imx35.c
ChangeLog v6->v7:
- Added Grant Likely in the Cc list.
- Added imx35-pingrp.h, and converted the rest of the patch to use it.
- lcdc pads were moved from the dtsi into another commit.
- A whitespace issue in the dtsi was removed.
ChangeLog v5->v6:
- The dependency on pdata clocks has been removed,
and the dtsi adapted accordinly.
- Adaptation to the for-next branch of Shawn Guo at
git://git.linaro.org/people/shawnguo/linux-2.6.git for-next
- imx35-dt.c: very small whitespace cleanup.
- Kconfig: The selection of IMX_HAVE_PLATFORM_* has been removed.
- dtsi: The nodes were reordered alphabetically.
- dtsi: The aliases have been reordered alphabetically.
- Shawn Guo was added in the Cc.
---
.../devicetree/bindings/clock/imx35-clock.txt | 113 ++++++++++++++++++++
arch/arm/mach-imx/Kconfig | 7 ++
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/clk-imx35.c | 16 +++
arch/arm/mach-imx/common.h | 1 +
arch/arm/mach-imx/imx35-dt.c | 48 +++++++++
6 files changed, 186 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
create mode 100644 arch/arm/mach-imx/imx35-dt.c
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt
new file mode 100644
index 0000000..a703564
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt
@@ -0,0 +1,113 @@
+* Clock bindings for Freescale i.MX35
+
+Required properties:
+- compatible: Should be "fsl,imx35-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX35
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ ckih 0
+ mpll 1
+ ppll 2
+ mpll_075 3
+ arm 4
+ hsp 5
+ hsp_div 6
+ hsp_sel 7
+ ahb 8
+ ipg 9
+ arm_per_div 10
+ ahb_per_div 11
+ ipg_per 12
+ uart_sel 13
+ uart_div 14
+ esdhc_sel 15
+ esdhc1_div 16
+ esdhc2_div 17
+ esdhc3_div 18
+ spdif_sel 19
+ spdif_div_pre 20
+ spdif_div_post 21
+ ssi_sel 22
+ ssi1_div_pre 23
+ ssi1_div_post 24
+ ssi2_div_pre 25
+ ssi2_div_post 26
+ usb_sel 27
+ usb_div 28
+ nfc_div 29
+ asrc_gate 30
+ pata_gate 31
+ audmux_gate 32
+ can1_gate 33
+ can2_gate 34
+ cspi1_gate 35
+ cspi2_gate 36
+ ect_gate 37
+ edio_gate 38
+ emi_gate 39
+ epit1_gate 40
+ epit2_gate 41
+ esai_gate 42
+ esdhc1_gate 43
+ esdhc2_gate 44
+ esdhc3_gate 45
+ fec_gate 46
+ gpio1_gate 47
+ gpio2_gate 48
+ gpio3_gate 49
+ gpt_gate 50
+ i2c1_gate 51
+ i2c2_gate 52
+ i2c3_gate 53
+ iomuxc_gate 54
+ ipu_gate 55
+ kpp_gate 56
+ mlb_gate 57
+ mshc_gate 58
+ owire_gate 59
+ pwm_gate 60
+ rngc_gate 61
+ rtc_gate 62
+ rtic_gate 63
+ scc_gate 64
+ sdma_gate 65
+ spba_gate 66
+ spdif_gate 67
+ ssi1_gate 68
+ ssi2_gate 69
+ uart1_gate 70
+ uart2_gate 71
+ uart3_gate 72
+ usbotg_gate 73
+ wdog_gate 74
+ max_gate 75
+ admux_gate 76
+ csi_gate 77
+ csi_div 78
+ csi_sel 79
+ iim_gate 80
+ gpu2d_gate 81
+
+Examples:
+
+clks: ccm at 53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+};
+
+esdhc1: esdhc at 53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8f6ce05..36014e2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -611,6 +611,13 @@ config MACH_IMX31_DT
comment "MX35 platforms:"
+config MACH_IMX35_DT
+ bool "Support i.MX35 platforms from device tree"
+ select SOC_IMX35
+ help
+ Include support for Freescale i.MX35 based platforms
+ using the device tree for discovery.
+
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select IMX_HAVE_PLATFORM_FLEXCAN
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 0db1697..befcaf5 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -89,6 +89,7 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 2193c83..9ef3c55 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -45,6 +45,8 @@ static struct arm_ahb_div clk_consumer[] = {
static char hsp_div_532[] = { 4, 8, 3, 0 };
static char hsp_div_400[] = { 3, 6, 3, 0 };
+static struct clk_onecell_data clk_data;
+
static const char *std_sel[] = {"ppll", "arm"};
static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
@@ -286,3 +288,17 @@ int __init mx35_clocks_init(void)
return 0;
}
+
+int __init mx35_clocks_init_dt(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm");
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ mx35_clocks_init();
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 59c3b9b..6919b7d 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -65,6 +65,7 @@ int mx35_clocks_init(void);
int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
int mx25_clocks_init_dt(void);
+int mx35_clocks_init_dt(void);
int mx27_clocks_init_dt(void);
int mx31_clocks_init_dt(void);
struct platform_device *mxc_register_gpio(char *name, int id,
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
new file mode 100644
index 0000000..e3def45
--- /dev/null
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27-dt.c
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "common.h"
+#include "mx35.h"
+
+static void __init imx35_dt_init(void)
+{
+ mxc_arch_reset_init_dt();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+}
+
+static void __init imx35_timer_init(void)
+{
+ mx35_clocks_init_dt();
+}
+
+static const char *imx35_dt_board_compat[] __initdata = {
+ "fsl,imx35",
+ NULL
+};
+
+DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
+ .map_io = mx35_map_io,
+ .init_early = imx35_init_early,
+ .init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
+ .init_time = imx35_timer_init,
+ .init_machine = imx35_dt_init,
+ .dt_compat = imx35_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
--
1.7.9.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 2/5] ARM i.MX35: build in pinctrl support.
2013-11-12 11:24 ` Denis Carikli
@ 2013-11-12 11:24 ` Denis Carikli
-1 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Denis Carikli, Rob Herring, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell, devicetree-u79uwXL29TY76Z2rM5mHXA,
Russell King, Linus Walleij, Eric Bénard
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v7->v8:
- The addition of the imx35 pinctrl driver selection in Kconfig that was in the
patch adding the devicetree support for the imx35 was moved here.
---
arch/arm/mach-imx/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 36014e2..7da4f22 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -124,6 +124,8 @@ config SOC_IMX35
select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
+ select PINCTRL
+ select PINCTRL_IMX35
select SMP_ON_UP if SMP
config SOC_IMX5
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 2/5] ARM i.MX35: build in pinctrl support.
@ 2013-11-12 11:24 ` Denis Carikli
0 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v7->v8:
- The addition of the imx35 pinctrl driver selection in Kconfig that was in the
patch adding the devicetree support for the imx35 was moved here.
---
arch/arm/mach-imx/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 36014e2..7da4f22 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -124,6 +124,8 @@ config SOC_IMX35
select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
+ select PINCTRL
+ select PINCTRL_IMX35
select SMP_ON_UP if SMP
config SOC_IMX5
--
1.7.9.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 3/5] ARM: dts: Add support for the i.MX35.
2013-11-12 11:24 ` Denis Carikli
@ 2013-11-12 11:24 ` Denis Carikli
-1 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Steffen Trumtrar, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Russell King,
Eric Bénard, Uwe Kleine-König, Denis Carikli
From: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v7->v8:
- The dts part of the patch that added the devicetree support for the imx35 was
moved here.
- The space in the nfc node was removed.
- A whitespace issue was fixed in imx35-pingrp.h
- fsl,ssi-dma-events was removed from the ssi node.
- The board specific iomuxc pins group configuration were removed.
ChangeLog v5->v6:
- The dependency on pdata clocks has been removed,
and the dtsi adapted accordinly.
- Adaptation to the for-next branch of Shawn Guo at
git://git.linaro.org/people/shawnguo/linux-2.6.git for-next
- imx35-dt.c: very small whitespace cleanup.
- Kconfig: The selection of IMX_HAVE_PLATFORM_* has been removed.
- dtsi: The nodes were reordered alphabetically.
- dtsi: The aliases have been reordered alphabetically.
- Shawn Guo was added in the Cc.
---
arch/arm/boot/dts/imx35-pingrp.h | 100 ++++++++++++
arch/arm/boot/dts/imx35.dtsi | 312 ++++++++++++++++++++++++++++++++++++++
2 files changed, 412 insertions(+)
create mode 100644 arch/arm/boot/dts/imx35-pingrp.h
create mode 100644 arch/arm/boot/dts/imx35.dtsi
diff --git a/arch/arm/boot/dts/imx35-pingrp.h b/arch/arm/boot/dts/imx35-pingrp.h
new file mode 100644
index 0000000..4e954a84
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-pingrp.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX35_PINGRP_H
+#define __DTS_IMX35_PINGRP_H
+
+#define MX35_AUDMUX_PINGRP1 \
+ MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000 \
+ MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000 \
+ MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000 \
+ MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000
+
+#define MX35_CAN1_PINGRP1 \
+ MX35_PAD_I2C2_CLK__CAN1_TXCAN 0x1c0 \
+ MX35_PAD_I2C2_DAT__CAN1_RXCAN 0x1c0
+
+#define MX35_CAN2_PINGRP1 \
+ MX35_PAD_TX5_RX0__CAN2_TXCAN 0x1c0 \
+ MX35_PAD_TX4_RX1__CAN2_RXCAN 0x1c0
+
+#define MX35_ESDHC1_PINGRP1 \
+ MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 \
+ MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 \
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 \
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 \
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 \
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
+
+#define MX35_FEC_PINGRP1 \
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 \
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 \
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 \
+ MX35_PAD_FEC_COL__FEC_COL 0x80000000 \
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 \
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 \
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 \
+ MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 \
+ MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 \
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 \
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 \
+ MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 \
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 \
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 \
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 \
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 \
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 \
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000
+
+#define MX35_I2C1_PINGRP1 \
+ MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 \
+ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
+
+#define MX35_I2C3_PINGRP1 \
+ MX35_PAD_ATA_DATA12__I2C3_SCL 0x1c0 \
+ MX35_PAD_ATA_DATA13__I2C3_SDA 0x1c0
+
+#define MX35_IPU_PINGRP1 \
+ MX35_PAD_LD0__IPU_DISPB_DAT_0 0x80000000 \
+ MX35_PAD_LD1__IPU_DISPB_DAT_1 0x80000000 \
+ MX35_PAD_LD2__IPU_DISPB_DAT_2 0x80000000 \
+ MX35_PAD_LD3__IPU_DISPB_DAT_3 0x80000000 \
+ MX35_PAD_LD4__IPU_DISPB_DAT_4 0x80000000 \
+ MX35_PAD_LD5__IPU_DISPB_DAT_5 0x80000000 \
+ MX35_PAD_LD6__IPU_DISPB_DAT_6 0x80000000 \
+ MX35_PAD_LD7__IPU_DISPB_DAT_7 0x80000000 \
+ MX35_PAD_LD8__IPU_DISPB_DAT_8 0x80000000 \
+ MX35_PAD_LD9__IPU_DISPB_DAT_9 0x80000000 \
+ MX35_PAD_LD10__IPU_DISPB_DAT_10 0x80000000 \
+ MX35_PAD_LD11__IPU_DISPB_DAT_11 0x80000000 \
+ MX35_PAD_LD12__IPU_DISPB_DAT_12 0x80000000 \
+ MX35_PAD_LD13__IPU_DISPB_DAT_13 0x80000000 \
+ MX35_PAD_LD14__IPU_DISPB_DAT_14 0x80000000 \
+ MX35_PAD_LD15__IPU_DISPB_DAT_15 0x80000000 \
+ MX35_PAD_LD16__IPU_DISPB_DAT_16 0x80000000 \
+ MX35_PAD_LD17__IPU_DISPB_DAT_17 0x80000000 \
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x80000000 \
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x80000000 \
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY 0x80000000 \
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x80000000 \
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR 0x80000000
+
+#define MX35_UART1_PINGRP1 \
+ MX35_PAD_CTS1__UART1_CTS 0x80000000 \
+ MX35_PAD_RTS1__UART1_RTS 0x80000000 \
+ MX35_PAD_TXD1__UART1_TXD_MUX 0x80000000 \
+ MX35_PAD_RXD1__UART1_RXD_MUX 0x80000000
+
+#define MX35_UART2_PINGRP1 \
+ MX35_PAD_RTS2__UART2_RTS 0x80000000 \
+ MX35_PAD_CTS2__UART2_CTS 0x80000000 \
+ MX35_PAD_RXD2__UART2_RXD_MUX 0x80000000 \
+ MX35_PAD_TXD2__UART2_TXD_MUX 0x80000000
+
+#endif /* __DTS_IMX35_PINGRP_H */
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
new file mode 100644
index 0000000..7bd0ee2
--- /dev/null
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -0,0 +1,312 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27.dtsi
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "imx35-pinfunc.h"
+#include "imx35-pingrp.h"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ };
+
+ avic: avic-interrupt-controller@68000000 {
+ compatible = "fsl,imx35-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x68000000 0x10000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ L2: l2-cache@30000000 {
+ compatible = "arm,l210-cache";
+ reg = <0x30000000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips1: aips@43f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ i2c1: i2c@43f80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f80000 0x4000>;
+ clocks = <&clks 51>;
+ clock-names = "ipg_per";
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@43f84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f84000 0x4000>;
+ clocks = <&clks 53>;
+ clock-names = "ipg_per";
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ clocks = <&clks 9>, <&clks 70>;
+ clock-names = "ipg", "per";
+ interrupts = <45>;
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ clocks = <&clks 9>, <&clks 71>;
+ clock-names = "ipg", "per";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@43f98000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f98000 0x4000>;
+ clocks = <&clks 52>;
+ clock-names = "ipg_per";
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@43fa0000 {
+ compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+ reg = <0x43fa0000 0x4000>;
+ interrupts = <11>;
+ clocks = <&clks 68>;
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@43fac000 {
+ compatible = "fsl,imx35-iomuxc";
+ reg = <0x43fac000 0x4000>;
+ };
+ };
+
+ spba: spba-bus@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x100000>;
+ ranges;
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ clocks = <&clks 9>, <&clks 72>;
+ clock-names = "ipg", "per";
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ fec: fec@50038000 {
+ compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+ reg = <0x50038000 0x4000>;
+ clocks = <&clks 46>, <&clks 8>;
+ clock-names = "ipg", "ahb";
+ interrupts = <57>;
+ status = "disabled";
+ };
+ };
+
+ aips2: aips@53f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x53f00000 0x100000>;
+ ranges;
+
+ clks: ccm@53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ gpio3: gpio@53fa4000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <56>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ esdhc1: esdhc@53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@53fb8000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb8000 0x4000>;
+ interrupts = <8>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc3: esdhc@53fbc000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <9>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ audmux: audmux@53fc4000 {
+ compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+ reg = <0x53fc4000 0x4000>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@53fcc000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53fd0000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fd0000 0x4000>;
+ interrupts = <51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdma: sdma@53fd4000 {
+ compatible = "fsl,imx35-sdma";
+ reg = <0x53fd4000 0x4000>;
+ clocks = <&clks 9>, <&clks 65>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ interrupts = <34>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+ };
+
+ wdog: wdog@53fdc000 {
+ compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+ reg = <0x53fdc000 0x4000>;
+ clocks = <&clks 74>;
+ clock-names = "";
+ interrupts = <55>;
+ };
+
+ can1: can@53fe4000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe4000 0x1000>;
+ clocks = <&clks 33>;
+ clock-names = "ipg";
+ interrupts = <43>;
+ status = "disabled";
+ };
+
+ can2: can@53fe8000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe8000 0x1000>;
+ clocks = <&clks 34>;
+ clock-names = "ipg";
+ interrupts = <44>;
+ status = "disabled";
+ };
+ };
+
+ emi@80000000 { /* External Memory Interface */
+ compatible = "fsl,emi", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x40000000>;
+ ranges;
+
+ nfc: nand@bb000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+ reg = <0xbb000000 0x2000>;
+ clocks = <&clks 29>;
+ clock-names = "";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ weim: weim@b8002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx35-weim";
+ reg = <0xb8002000 0x1000>;
+ ranges = <
+ 0 0 0xa0000000 0x8000000
+ 1 0 0xa8000000 0x8000000
+ 2 0 0xb0000000 0x2000000
+ 3 0 0xb2000000 0x2000000
+ 4 0 0xb4000000 0x2000000
+ 5 0 0xb6000000 0x2000000
+ >;
+ status = "disabled";
+ };
+ };
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 3/5] ARM: dts: Add support for the i.MX35.
@ 2013-11-12 11:24 ` Denis Carikli
0 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: linux-arm-kernel
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree at vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v7->v8:
- The dts part of the patch that added the devicetree support for the imx35 was
moved here.
- The space in the nfc node was removed.
- A whitespace issue was fixed in imx35-pingrp.h
- fsl,ssi-dma-events was removed from the ssi node.
- The board specific iomuxc pins group configuration were removed.
ChangeLog v5->v6:
- The dependency on pdata clocks has been removed,
and the dtsi adapted accordinly.
- Adaptation to the for-next branch of Shawn Guo at
git://git.linaro.org/people/shawnguo/linux-2.6.git for-next
- imx35-dt.c: very small whitespace cleanup.
- Kconfig: The selection of IMX_HAVE_PLATFORM_* has been removed.
- dtsi: The nodes were reordered alphabetically.
- dtsi: The aliases have been reordered alphabetically.
- Shawn Guo was added in the Cc.
---
arch/arm/boot/dts/imx35-pingrp.h | 100 ++++++++++++
arch/arm/boot/dts/imx35.dtsi | 312 ++++++++++++++++++++++++++++++++++++++
2 files changed, 412 insertions(+)
create mode 100644 arch/arm/boot/dts/imx35-pingrp.h
create mode 100644 arch/arm/boot/dts/imx35.dtsi
diff --git a/arch/arm/boot/dts/imx35-pingrp.h b/arch/arm/boot/dts/imx35-pingrp.h
new file mode 100644
index 0000000..4e954a84
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-pingrp.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX35_PINGRP_H
+#define __DTS_IMX35_PINGRP_H
+
+#define MX35_AUDMUX_PINGRP1 \
+ MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000 \
+ MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000 \
+ MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000 \
+ MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000
+
+#define MX35_CAN1_PINGRP1 \
+ MX35_PAD_I2C2_CLK__CAN1_TXCAN 0x1c0 \
+ MX35_PAD_I2C2_DAT__CAN1_RXCAN 0x1c0
+
+#define MX35_CAN2_PINGRP1 \
+ MX35_PAD_TX5_RX0__CAN2_TXCAN 0x1c0 \
+ MX35_PAD_TX4_RX1__CAN2_RXCAN 0x1c0
+
+#define MX35_ESDHC1_PINGRP1 \
+ MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 \
+ MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 \
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 \
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 \
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 \
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
+
+#define MX35_FEC_PINGRP1 \
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 \
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000 \
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 \
+ MX35_PAD_FEC_COL__FEC_COL 0x80000000 \
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000 \
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000 \
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 \
+ MX35_PAD_FEC_MDC__FEC_MDC 0x80000000 \
+ MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000 \
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000 \
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000 \
+ MX35_PAD_FEC_CRS__FEC_CRS 0x80000000 \
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000 \
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000 \
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000 \
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000 \
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000 \
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000
+
+#define MX35_I2C1_PINGRP1 \
+ MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000 \
+ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
+
+#define MX35_I2C3_PINGRP1 \
+ MX35_PAD_ATA_DATA12__I2C3_SCL 0x1c0 \
+ MX35_PAD_ATA_DATA13__I2C3_SDA 0x1c0
+
+#define MX35_IPU_PINGRP1 \
+ MX35_PAD_LD0__IPU_DISPB_DAT_0 0x80000000 \
+ MX35_PAD_LD1__IPU_DISPB_DAT_1 0x80000000 \
+ MX35_PAD_LD2__IPU_DISPB_DAT_2 0x80000000 \
+ MX35_PAD_LD3__IPU_DISPB_DAT_3 0x80000000 \
+ MX35_PAD_LD4__IPU_DISPB_DAT_4 0x80000000 \
+ MX35_PAD_LD5__IPU_DISPB_DAT_5 0x80000000 \
+ MX35_PAD_LD6__IPU_DISPB_DAT_6 0x80000000 \
+ MX35_PAD_LD7__IPU_DISPB_DAT_7 0x80000000 \
+ MX35_PAD_LD8__IPU_DISPB_DAT_8 0x80000000 \
+ MX35_PAD_LD9__IPU_DISPB_DAT_9 0x80000000 \
+ MX35_PAD_LD10__IPU_DISPB_DAT_10 0x80000000 \
+ MX35_PAD_LD11__IPU_DISPB_DAT_11 0x80000000 \
+ MX35_PAD_LD12__IPU_DISPB_DAT_12 0x80000000 \
+ MX35_PAD_LD13__IPU_DISPB_DAT_13 0x80000000 \
+ MX35_PAD_LD14__IPU_DISPB_DAT_14 0x80000000 \
+ MX35_PAD_LD15__IPU_DISPB_DAT_15 0x80000000 \
+ MX35_PAD_LD16__IPU_DISPB_DAT_16 0x80000000 \
+ MX35_PAD_LD17__IPU_DISPB_DAT_17 0x80000000 \
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x80000000 \
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x80000000 \
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY 0x80000000 \
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x80000000 \
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR 0x80000000
+
+#define MX35_UART1_PINGRP1 \
+ MX35_PAD_CTS1__UART1_CTS 0x80000000 \
+ MX35_PAD_RTS1__UART1_RTS 0x80000000 \
+ MX35_PAD_TXD1__UART1_TXD_MUX 0x80000000 \
+ MX35_PAD_RXD1__UART1_RXD_MUX 0x80000000
+
+#define MX35_UART2_PINGRP1 \
+ MX35_PAD_RTS2__UART2_RTS 0x80000000 \
+ MX35_PAD_CTS2__UART2_CTS 0x80000000 \
+ MX35_PAD_RXD2__UART2_RXD_MUX 0x80000000 \
+ MX35_PAD_TXD2__UART2_TXD_MUX 0x80000000
+
+#endif /* __DTS_IMX35_PINGRP_H */
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
new file mode 100644
index 0000000..7bd0ee2
--- /dev/null
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -0,0 +1,312 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27.dtsi
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "imx35-pinfunc.h"
+#include "imx35-pingrp.h"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ };
+
+ avic: avic-interrupt-controller at 68000000 {
+ compatible = "fsl,imx35-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x68000000 0x10000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ L2: l2-cache at 30000000 {
+ compatible = "arm,l210-cache";
+ reg = <0x30000000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips1: aips at 43f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ i2c1: i2c at 43f80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f80000 0x4000>;
+ clocks = <&clks 51>;
+ clock-names = "ipg_per";
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at 43f84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f84000 0x4000>;
+ clocks = <&clks 53>;
+ clock-names = "ipg_per";
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ uart1: serial at 43f90000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ clocks = <&clks 9>, <&clks 70>;
+ clock-names = "ipg", "per";
+ interrupts = <45>;
+ status = "disabled";
+ };
+
+ uart2: serial at 43f94000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ clocks = <&clks 9>, <&clks 71>;
+ clock-names = "ipg", "per";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 43f98000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f98000 0x4000>;
+ clocks = <&clks 52>;
+ clock-names = "ipg_per";
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ ssi1: ssi at 43fa0000 {
+ compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+ reg = <0x43fa0000 0x4000>;
+ interrupts = <11>;
+ clocks = <&clks 68>;
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc at 43fac000 {
+ compatible = "fsl,imx35-iomuxc";
+ reg = <0x43fac000 0x4000>;
+ };
+ };
+
+ spba: spba-bus at 50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x100000>;
+ ranges;
+
+ uart3: serial at 5000c000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ clocks = <&clks 9>, <&clks 72>;
+ clock-names = "ipg", "per";
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ fec: fec at 50038000 {
+ compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+ reg = <0x50038000 0x4000>;
+ clocks = <&clks 46>, <&clks 8>;
+ clock-names = "ipg", "ahb";
+ interrupts = <57>;
+ status = "disabled";
+ };
+ };
+
+ aips2: aips at 53f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x53f00000 0x100000>;
+ ranges;
+
+ clks: ccm at 53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ gpio3: gpio at 53fa4000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <56>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ esdhc1: esdhc at 53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc2: esdhc at 53fb8000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb8000 0x4000>;
+ interrupts = <8>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc3: esdhc at 53fbc000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <9>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ audmux: audmux at 53fc4000 {
+ compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+ reg = <0x53fc4000 0x4000>;
+ status = "disabled";
+ };
+
+ gpio1: gpio at 53fcc000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 53fd0000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fd0000 0x4000>;
+ interrupts = <51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdma: sdma at 53fd4000 {
+ compatible = "fsl,imx35-sdma";
+ reg = <0x53fd4000 0x4000>;
+ clocks = <&clks 9>, <&clks 65>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ interrupts = <34>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+ };
+
+ wdog: wdog at 53fdc000 {
+ compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+ reg = <0x53fdc000 0x4000>;
+ clocks = <&clks 74>;
+ clock-names = "";
+ interrupts = <55>;
+ };
+
+ can1: can at 53fe4000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe4000 0x1000>;
+ clocks = <&clks 33>;
+ clock-names = "ipg";
+ interrupts = <43>;
+ status = "disabled";
+ };
+
+ can2: can at 53fe8000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe8000 0x1000>;
+ clocks = <&clks 34>;
+ clock-names = "ipg";
+ interrupts = <44>;
+ status = "disabled";
+ };
+ };
+
+ emi at 80000000 { /* External Memory Interface */
+ compatible = "fsl,emi", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x40000000>;
+ ranges;
+
+ nfc: nand at bb000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+ reg = <0xbb000000 0x2000>;
+ clocks = <&clks 29>;
+ clock-names = "";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ weim: weim at b8002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx35-weim";
+ reg = <0xb8002000 0x1000>;
+ ranges = <
+ 0 0 0xa0000000 0x8000000
+ 1 0 0xa8000000 0x8000000
+ 2 0 0xb0000000 0x2000000
+ 3 0 0xb2000000 0x2000000
+ 4 0 0xb4000000 0x2000000
+ 5 0 0xb6000000 0x2000000
+ >;
+ status = "disabled";
+ };
+ };
+ };
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
2013-11-12 11:24 ` Denis Carikli
@ 2013-11-12 11:24 ` Denis Carikli
-1 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Denis Carikli, Rob Herring, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell, Grant Likely,
devicetree-u79uwXL29TY76Z2rM5mHXA, Eric Bénard
The following devices/functionalities were added:
* Main and secondary UARTs.
* i2c and the pcf8563 device.
* Ethernet.
* NAND.
* The BP1 button.
* The LED.
* Watchdog
* SD.
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
ChangeLog v7->v8:
- The commit message was improved.
- The board specific iomuxc pins group configuration that were in imx35.dtsi were moved here.
- The rest of the patch was updated accordingly.
ChangeLog v6->v7:
- Added Grant Likely in the Cc list.
- Shortened the license.
- The tsc2007 pads were moved in another patch.
ChangeLog v5->v6:
- Shawn Guo was added in the Cc.
---
arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 58 +++++++++
.../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 124 ++++++++++++++++++++
2 files changed, 182 insertions(+)
create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 0000000..3260678
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+ memory {
+ reg = <0x80000000 0x8000000>; /* 128M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx35-eukrea {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX35_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX35_I2C1_PINGRP1>;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 0000000..fe0f3fa
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 25 1>;
+ linux,code = <256>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 29 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio3 24 0>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx35-eukrea {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX35_PAD_LD18__GPIO3_24 0x80000000
+ MX35_PAD_LD19__GPIO3_25 0x80000000
+ MX35_PAD_LD23__GPIO3_29 0x80000000
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <MX35_AUDMUX_PINGRP1>;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <MX35_ESDHC1_PINGRP1>;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX35_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX35_I2C1_PINGRP1>;
+ };
+
+ pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+ fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX35_UART1_PINGRP1>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX35_UART2_PINGRP1>;
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
@ 2013-11-12 11:24 ` Denis Carikli
0 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: linux-arm-kernel
The following devices/functionalities were added:
* Main and secondary UARTs.
* i2c and the pcf8563 device.
* Ethernet.
* NAND.
* The BP1 button.
* The LED.
* Watchdog
* SD.
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
ChangeLog v7->v8:
- The commit message was improved.
- The board specific iomuxc pins group configuration that were in imx35.dtsi were moved here.
- The rest of the patch was updated accordingly.
ChangeLog v6->v7:
- Added Grant Likely in the Cc list.
- Shortened the license.
- The tsc2007 pads were moved in another patch.
ChangeLog v5->v6:
- Shawn Guo was added in the Cc.
---
arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 58 +++++++++
.../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 124 ++++++++++++++++++++
2 files changed, 182 insertions(+)
create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 0000000..3260678
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+ memory {
+ reg = <0x80000000 0x8000000>; /* 128M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+ pcf8563 at 51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx35-eukrea {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX35_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX35_I2C1_PINGRP1>;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 0000000..fe0f3fa
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 25 1>;
+ linux,code = <256>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 29 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio3 24 0>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec at 1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx35-eukrea {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX35_PAD_LD18__GPIO3_24 0x80000000
+ MX35_PAD_LD19__GPIO3_25 0x80000000
+ MX35_PAD_LD23__GPIO3_29 0x80000000
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <MX35_AUDMUX_PINGRP1>;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <MX35_ESDHC1_PINGRP1>;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX35_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX35_I2C1_PINGRP1>;
+ };
+
+ pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+ fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX35_UART1_PINGRP1>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX35_UART2_PINGRP1>;
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCHv8][ 5/5] ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.
2013-11-12 11:24 ` Denis Carikli
(?)
(?)
@ 2013-11-12 11:24 ` Denis Carikli
-1 siblings, 0 replies; 15+ messages in thread
From: Denis Carikli @ 2013-11-12 11:24 UTC (permalink / raw)
To: linux-arm-kernel
The eukrea cpuimx35 has a pcf8563 RTC and a LCD gpio regulator.
We enable the respective drivers in order to be able to use theses
features with this configuration.
We also enabled the i.MX35 DT support because the cpuimx35 has now DT support.
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v6->v7:
- Shawn Guo's CC was moved up.
ChangeLog v5->v6:
- Removed leds support addition because it has already been added by
94425a1 ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
---
arch/arm/configs/imx_v6_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index c814e0e..53e854a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -28,6 +28,7 @@ CONFIG_MACH_QONG=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MACH_IMX31_DT=y
+CONFIG_MACH_IMX35_DT=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
@@ -161,6 +162,7 @@ CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_MEDIA_SUPPORT=y
@@ -217,6 +219,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_SNVS=y
--
1.7.9.5
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCHv8][ 3/5] ARM: dts: Add support for the i.MX35.
2013-11-12 11:24 ` Denis Carikli
@ 2013-11-13 15:16 ` Shawn Guo
-1 siblings, 0 replies; 15+ messages in thread
From: Shawn Guo @ 2013-11-13 15:16 UTC (permalink / raw)
To: Denis Carikli
Cc: Sascha Hauer, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Steffen Trumtrar, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Russell King,
Eric Bénard, Uwe Kleine-König
On Tue, Nov 12, 2013 at 12:24:17PM +0100, Denis Carikli wrote:
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35.dtsi
> @@ -0,0 +1,312 @@
> +/*
> + * Copyright 2012 Steffen Trumtrar, Pengutronix
> + *
> + * based on imx27.dtsi
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +
> +#include "skeleton.dtsi"
> +#include "imx35-pinfunc.h"
> +#include "imx35-pingrp.h"
> +
> +/ {
> + aliases {
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + };
> +
> + avic: avic-interrupt-controller@68000000 {
> + compatible = "fsl,imx35-avic", "fsl,avic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x68000000 0x10000000>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ckil {
> + compatible = "fsl,imx-ckil", "fixed-clock";
> + clock-frequency = <32768>;
> + };
> +
> + osc {
> + compatible = "fsl,imx-osc", "fixed-clock";
> + clock-frequency = <24000000>;
> + };
> + };
Are these clocks available for imx35? If not, please remove them.
Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv8][ 3/5] ARM: dts: Add support for the i.MX35.
@ 2013-11-13 15:16 ` Shawn Guo
0 siblings, 0 replies; 15+ messages in thread
From: Shawn Guo @ 2013-11-13 15:16 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 12, 2013 at 12:24:17PM +0100, Denis Carikli wrote:
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35.dtsi
> @@ -0,0 +1,312 @@
> +/*
> + * Copyright 2012 Steffen Trumtrar, Pengutronix
> + *
> + * based on imx27.dtsi
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +
> +#include "skeleton.dtsi"
> +#include "imx35-pinfunc.h"
> +#include "imx35-pingrp.h"
> +
> +/ {
> + aliases {
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + };
> +
> + avic: avic-interrupt-controller at 68000000 {
> + compatible = "fsl,imx35-avic", "fsl,avic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x68000000 0x10000000>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ckil {
> + compatible = "fsl,imx-ckil", "fixed-clock";
> + clock-frequency = <32768>;
> + };
> +
> + osc {
> + compatible = "fsl,imx-osc", "fixed-clock";
> + clock-frequency = <24000000>;
> + };
> + };
Are these clocks available for imx35? If not, please remove them.
Shawn
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
2013-11-12 11:24 ` Denis Carikli
@ 2013-11-13 15:23 ` Shawn Guo
-1 siblings, 0 replies; 15+ messages in thread
From: Shawn Guo @ 2013-11-13 15:23 UTC (permalink / raw)
To: Denis Carikli
Cc: Sascha Hauer, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Grant Likely, devicetree-u79uwXL29TY76Z2rM5mHXA,
Eric Bénard
On Tue, Nov 12, 2013 at 12:24:18PM +0100, Denis Carikli wrote:
> The following devices/functionalities were added:
> * Main and secondary UARTs.
> * i2c and the pcf8563 device.
> * Ethernet.
> * NAND.
> * The BP1 button.
> * The LED.
> * Watchdog
> * SD.
>
> Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
> Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
> Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
> Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
> Acked-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> ---
> ChangeLog v7->v8:
> - The commit message was improved.
> - The board specific iomuxc pins group configuration that were in imx35.dtsi were moved here.
> - The rest of the patch was updated accordingly.
>
> ChangeLog v6->v7:
> - Added Grant Likely in the Cc list.
> - Shortened the license.
> - The tsc2007 pads were moved in another patch.
>
> ChangeLog v5->v6:
> - Shawn Guo was added in the Cc.
> ---
> arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 58 +++++++++
> .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 124 ++++++++++++++++++++
> 2 files changed, 182 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
Please add the dtb target into arch/arm/boot/dts/Makefile.
>
> diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> new file mode 100644
> index 0000000..3260678
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "imx35.dtsi"
> +
> +/ {
> + model = "Eukrea CPUIMX35";
> + compatible = "eukrea,cpuimx35", "fsl,imx35";
> +
> + memory {
> + reg = <0x80000000 0x8000000>; /* 128M */
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
Nit: have a blank line here.
> + pcf8563@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&iomuxc {
> + imx35-eukrea {
> + pinctrl_fec: fecgrp {
> + fsl,pins = <MX35_FEC_PINGRP1>;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <MX35_I2C1_PINGRP1>;
> + };
> + };
> +};
> +
> +&nfc {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + nand-on-flash-bbt;
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> new file mode 100644
> index 0000000..fe0f3fa
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "imx35-eukrea-cpuimx35.dtsi"
> +
> +/ {
> + model = "Eukrea CPUIMX35";
> + compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> +
> + bp1 {
> + label = "BP1";
> + gpios = <&gpio3 25 1>;
> + linux,code = <256>;
> + gpio-key,wakeup;
> + linux,input-type = <1>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led1 {
> + label = "led1";
> + gpios = <&gpio3 29 1>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_esdhc1>;
> + cd-gpios = <&gpio3 24 0>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + tlv320aic23: codec@1a {
> + compatible = "ti,tlv320aic23";
> + reg = <0x1a>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
Use tab instead of spaces.
> +
> + imx35-eukrea {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX35_PAD_LD18__GPIO3_24 0x80000000
> + MX35_PAD_LD19__GPIO3_25 0x80000000
> + MX35_PAD_LD23__GPIO3_29 0x80000000
> + >;
> + };
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <MX35_AUDMUX_PINGRP1>;
> + };
> +
> + pinctrl_esdhc1: esdhc1grp {
> + fsl,pins = <MX35_ESDHC1_PINGRP1>;
> + };
> +
> + pinctrl_fec: fecgrp {
> + fsl,pins = <MX35_FEC_PINGRP1>;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <MX35_I2C1_PINGRP1>;
> + };
> +
> + pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
'_' is used in label while '-' should be used in node name.
Shawn
> + fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <MX35_UART1_PINGRP1>;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <MX35_UART2_PINGRP1>;
> + };
> + };
> +};
> +
> +&ssi1 {
> + fsl,mode = "i2s-slave";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
@ 2013-11-13 15:23 ` Shawn Guo
0 siblings, 0 replies; 15+ messages in thread
From: Shawn Guo @ 2013-11-13 15:23 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 12, 2013 at 12:24:18PM +0100, Denis Carikli wrote:
> The following devices/functionalities were added:
> * Main and secondary UARTs.
> * i2c and the pcf8563 device.
> * Ethernet.
> * NAND.
> * The BP1 button.
> * The LED.
> * Watchdog
> * SD.
>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Grant Likely <grant.likely@linaro.org>
> Cc: devicetree at vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: Eric B?nard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> ChangeLog v7->v8:
> - The commit message was improved.
> - The board specific iomuxc pins group configuration that were in imx35.dtsi were moved here.
> - The rest of the patch was updated accordingly.
>
> ChangeLog v6->v7:
> - Added Grant Likely in the Cc list.
> - Shortened the license.
> - The tsc2007 pads were moved in another patch.
>
> ChangeLog v5->v6:
> - Shawn Guo was added in the Cc.
> ---
> arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 58 +++++++++
> .../boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts | 124 ++++++++++++++++++++
> 2 files changed, 182 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
Please add the dtb target into arch/arm/boot/dts/Makefile.
>
> diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> new file mode 100644
> index 0000000..3260678
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "imx35.dtsi"
> +
> +/ {
> + model = "Eukrea CPUIMX35";
> + compatible = "eukrea,cpuimx35", "fsl,imx35";
> +
> + memory {
> + reg = <0x80000000 0x8000000>; /* 128M */
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
Nit: have a blank line here.
> + pcf8563 at 51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&iomuxc {
> + imx35-eukrea {
> + pinctrl_fec: fecgrp {
> + fsl,pins = <MX35_FEC_PINGRP1>;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <MX35_I2C1_PINGRP1>;
> + };
> + };
> +};
> +
> +&nfc {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + nand-on-flash-bbt;
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> new file mode 100644
> index 0000000..fe0f3fa
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "imx35-eukrea-cpuimx35.dtsi"
> +
> +/ {
> + model = "Eukrea CPUIMX35";
> + compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> +
> + bp1 {
> + label = "BP1";
> + gpios = <&gpio3 25 1>;
> + linux,code = <256>;
> + gpio-key,wakeup;
> + linux,input-type = <1>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led1 {
> + label = "led1";
> + gpios = <&gpio3 29 1>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_esdhc1>;
> + cd-gpios = <&gpio3 24 0>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + tlv320aic23: codec at 1a {
> + compatible = "ti,tlv320aic23";
> + reg = <0x1a>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
Use tab instead of spaces.
> +
> + imx35-eukrea {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX35_PAD_LD18__GPIO3_24 0x80000000
> + MX35_PAD_LD19__GPIO3_25 0x80000000
> + MX35_PAD_LD23__GPIO3_29 0x80000000
> + >;
> + };
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <MX35_AUDMUX_PINGRP1>;
> + };
> +
> + pinctrl_esdhc1: esdhc1grp {
> + fsl,pins = <MX35_ESDHC1_PINGRP1>;
> + };
> +
> + pinctrl_fec: fecgrp {
> + fsl,pins = <MX35_FEC_PINGRP1>;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <MX35_I2C1_PINGRP1>;
> + };
> +
> + pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
'_' is used in label while '-' should be used in node name.
Shawn
> + fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <MX35_UART1_PINGRP1>;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <MX35_UART2_PINGRP1>;
> + };
> + };
> +};
> +
> +&ssi1 {
> + fsl,mode = "i2s-slave";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support.
2013-11-12 11:24 ` Denis Carikli
@ 2013-11-13 15:26 ` Shawn Guo
-1 siblings, 0 replies; 15+ messages in thread
From: Shawn Guo @ 2013-11-13 15:26 UTC (permalink / raw)
To: Denis Carikli
Cc: Sascha Hauer, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Steffen Trumtrar, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Grant Likely, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA, Russell King,
Eric Bénard, Uwe Kleine-König
On Tue, Nov 12, 2013 at 12:24:15PM +0100, Denis Carikli wrote:
> --- /dev/null
> +++ b/arch/arm/mach-imx/imx35-dt.c
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright 2012 Steffen Trumtrar, Pengutronix
> + *
> + * based on imx27-dt.c
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +#include <asm/hardware/cache-l2x0.h>
> +#include "common.h"
> +#include "mx35.h"
> +
> +static void __init imx35_dt_init(void)
> +{
> + mxc_arch_reset_init_dt();
> +
> + of_platform_populate(NULL, of_default_bus_match_table,
> + NULL, NULL);
> +}
> +
> +static void __init imx35_timer_init(void)
> +{
> + mx35_clocks_init_dt();
> +}
> +
> +static const char *imx35_dt_board_compat[] __initdata = {
> + "fsl,imx35",
> + NULL
> +};
> +
> +DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
> + .map_io = mx35_map_io,
> + .init_early = imx35_init_early,
> + .init_irq = mx35_init_irq,
> + .handle_irq = imx35_handle_irq,
> + .init_time = imx35_timer_init,
Please use CLK_OF_DECLARE() to save this hook. You can look at imx51
clock driver for example.
Shawn
> + .init_machine = imx35_dt_init,
> + .dt_compat = imx35_dt_board_compat,
> + .restart = mxc_restart,
> +MACHINE_END
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support.
@ 2013-11-13 15:26 ` Shawn Guo
0 siblings, 0 replies; 15+ messages in thread
From: Shawn Guo @ 2013-11-13 15:26 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Nov 12, 2013 at 12:24:15PM +0100, Denis Carikli wrote:
> --- /dev/null
> +++ b/arch/arm/mach-imx/imx35-dt.c
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright 2012 Steffen Trumtrar, Pengutronix
> + *
> + * based on imx27-dt.c
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +#include <asm/hardware/cache-l2x0.h>
> +#include "common.h"
> +#include "mx35.h"
> +
> +static void __init imx35_dt_init(void)
> +{
> + mxc_arch_reset_init_dt();
> +
> + of_platform_populate(NULL, of_default_bus_match_table,
> + NULL, NULL);
> +}
> +
> +static void __init imx35_timer_init(void)
> +{
> + mx35_clocks_init_dt();
> +}
> +
> +static const char *imx35_dt_board_compat[] __initdata = {
> + "fsl,imx35",
> + NULL
> +};
> +
> +DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
> + .map_io = mx35_map_io,
> + .init_early = imx35_init_early,
> + .init_irq = mx35_init_irq,
> + .handle_irq = imx35_handle_irq,
> + .init_time = imx35_timer_init,
Please use CLK_OF_DECLARE() to save this hook. You can look at imx51
clock driver for example.
Shawn
> + .init_machine = imx35_dt_init,
> + .dt_compat = imx35_dt_board_compat,
> + .restart = mxc_restart,
> +MACHINE_END
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2013-11-13 15:26 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-12 11:24 [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support Denis Carikli
2013-11-12 11:24 ` Denis Carikli
[not found] ` <1384255459-15134-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-11-12 11:24 ` [PATCHv8][ 2/5] ARM i.MX35: build in pinctrl support Denis Carikli
2013-11-12 11:24 ` Denis Carikli
2013-11-12 11:24 ` [PATCHv8][ 3/5] ARM: dts: Add support for the i.MX35 Denis Carikli
2013-11-12 11:24 ` Denis Carikli
[not found] ` <1384255459-15134-3-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-11-13 15:16 ` Shawn Guo
2013-11-13 15:16 ` Shawn Guo
2013-11-12 11:24 ` [PATCHv8][ 4/5] ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard Denis Carikli
2013-11-12 11:24 ` Denis Carikli
[not found] ` <1384255459-15134-4-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-11-13 15:23 ` Shawn Guo
2013-11-13 15:23 ` Shawn Guo
2013-11-13 15:26 ` [PATCHv8][ 1/5] ARM i.MX35: Add devicetree support Shawn Guo
2013-11-13 15:26 ` Shawn Guo
2013-11-12 11:24 ` [PATCHv8][ 5/5] ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35 Denis Carikli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.