All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 5/6] drm/i915/vlv: move DPIO init earlier v2
Date: Sat, 14 Dec 2013 11:47:36 +0100	[thread overview]
Message-ID: <20131214104736.GI9804@phenom.ffwll.local> (raw)
In-Reply-To: <1386880917-2951-5-git-send-email-jbarnes@virtuousgeek.org>

On Thu, Dec 12, 2013 at 12:41:56PM -0800, Jesse Barnes wrote:
> It's needed for early mode state readout, which is in turn needed to
> inherit the BIOS config.  So split out the reset, which we need on
> resume too, from the DPIO reg init, and do the latter earlier.
> 
> v2: split reset and reg init
> 
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Isn't this a fixup due to the slight init reordering you do in patch 2? If
so we need to get this one in first, and I'd also prefer if the init
reordering is split out as a separate patch from patch 2 - that stuff
almost always ends up hurting us in some way or the order, so a minimal
patch as an obvious bisect point is imo worth it.

With those prep patches split out I could also start merging to get this
sucker moving finally.
-Daniel

> ---
>  drivers/gpu/drm/i915/intel_display.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index b868331..f265110 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1368,6 +1368,15 @@ static void intel_init_dpio(struct drm_device *dev)
>  		return;
>  
>  	DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
> +}
> +
> +static void intel_dpio_reset(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +
> +	if (!IS_VALLEYVIEW(dev))
> +		return;
> +
>  	/*
>  	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
>  	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
> @@ -10908,7 +10917,7 @@ void intel_modeset_init_hw(struct drm_device *dev)
>  		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
>  			   DPLL_INTEGRATED_CRI_CLK_VLV);
>  
> -	intel_init_dpio(dev);
> +	intel_dpio_reset(dev);
>  
>  	mutex_lock(&dev->struct_mutex);
>  	intel_enable_gt_powersave(dev);
> @@ -10971,6 +10980,8 @@ void intel_modeset_init(struct drm_device *dev)
>  		}
>  	}
>  
> +	intel_init_dpio(dev);
> +
>  	intel_cpu_pll_init(dev);
>  	intel_shared_dpll_init(dev);
>  
> -- 
> 1.8.4.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

  reply	other threads:[~2013-12-14 10:46 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-12 20:41 [PATCH 1/6] drm/i915: unconditionally copy mode into crtc at boot time Jesse Barnes
2013-12-12 20:41 ` [PATCH 2/6] drm/i915: retrieve current fb config into new plane_config structure at init Jesse Barnes
2013-12-14 11:01   ` Daniel Vetter
2013-12-17  0:01     ` Jesse Barnes
2013-12-17  8:38       ` Daniel Vetter
2013-12-17 21:04         ` Jesse Barnes
2013-12-17 21:19           ` Daniel Vetter
2013-12-12 20:41 ` [PATCH 3/6] drm/i915: Wrap the preallocated BIOS framebuffer and preserve for KMS fbcon v7 Jesse Barnes
2013-12-12 22:54   ` Daniel Vetter
2013-12-12 23:45     ` Jesse Barnes
2013-12-13 19:09     ` Jesse Barnes
2013-12-13 20:47       ` Daniel Vetter
2013-12-14  0:43         ` Jesse Barnes
2013-12-14 10:44           ` Daniel Vetter
2013-12-14 11:33             ` Daniel Vetter
2013-12-14 11:13   ` Daniel Vetter
2013-12-14 11:36     ` Daniel Vetter
2014-02-05 14:57       ` Jesse Barnes
2013-12-12 20:41 ` [PATCH 4/6] drm/i915: don't memset the fb buffer if preallocated Jesse Barnes
2013-12-14 11:28   ` Daniel Vetter
2013-12-17  0:17     ` Jesse Barnes
2013-12-17  7:56       ` Daniel Vetter
2013-12-12 20:41 ` [PATCH 5/6] drm/i915/vlv: move DPIO init earlier v2 Jesse Barnes
2013-12-14 10:47   ` Daniel Vetter [this message]
2013-12-17  0:02     ` Jesse Barnes
2013-12-12 20:41 ` [PATCH 6/6] drm/i915: inform drm_fb_helper if we abandoned a connected output Jesse Barnes
2013-12-12 22:30   ` Chris Wilson
2013-12-12 22:34     ` Jesse Barnes
2013-12-17  0:18     ` Jesse Barnes
2013-12-12 21:21 ` [PATCH 1/6] drm/i915: unconditionally copy mode into crtc at boot time Daniel Vetter
2013-12-12 21:29   ` Jesse Barnes
2013-12-12 22:39     ` Daniel Vetter
2013-12-12 22:44       ` Jesse Barnes
2013-12-12 23:04         ` Daniel Vetter
2013-12-17  0:35         ` Jesse Barnes
2013-12-17  8:00           ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131214104736.GI9804@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jbarnes@virtuousgeek.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.