All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
@ 2013-12-15 19:23 Hans de Goede
  2013-12-16 10:52 ` Maxime Ripard
  0 siblings, 1 reply; 2+ messages in thread
From: Hans de Goede @ 2013-12-15 19:23 UTC (permalink / raw)
  To: linux-arm-kernel

The A13-OLinuXino-MICRO is a small dev-board with the Allwinner A13 SoC:
https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/

Features:
A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
256 MB RAM (128Mbit x 16)
5VDC input power supply with own ICs, noise immune design
1 USB host
1 USB OTG which can power the board
SD-card connector for booting the Linux image
VGA video output
LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
Audio output
Microphone input pads (no connector)

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 68 +++++++++++++++++++++++++
 2 files changed, 69 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a6..b663ed7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -255,6 +255,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
 	sun6i-a31-colombus.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 0000000..fe2ce0a
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a13.dtsi"
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	soc at 01c00000 {
+		pinctrl at 01c20800 {
+			led_pins_olinuxinom: led_pins at 0 {
+				allwinner,pins = "PG9";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart1: serial at 01c28400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins_b>;
+			status = "okay";
+		};
+
+		i2c0: i2c at 01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c at 01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c at 01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		power {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 0>;
+			default-state = "on";
+		};
+	};
+};
-- 
1.8.4.2

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH v3] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
  2013-12-15 19:23 [PATCH v3] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board Hans de Goede
@ 2013-12-16 10:52 ` Maxime Ripard
  0 siblings, 0 replies; 2+ messages in thread
From: Maxime Ripard @ 2013-12-16 10:52 UTC (permalink / raw)
  To: linux-arm-kernel

On Sun, Dec 15, 2013 at 08:23:36PM +0100, Hans de Goede wrote:
> The A13-OLinuXino-MICRO is a small dev-board with the Allwinner A13 SoC:
> https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/
> 
> Features:
> A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
> 256 MB RAM (128Mbit x 16)
> 5VDC input power supply with own ICs, noise immune design
> 1 USB host
> 1 USB OTG which can power the board
> SD-card connector for booting the Linux image
> VGA video output
> LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
> Audio output
> Microphone input pads (no connector)
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Applied in sunxi/dt-for-3.14.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131216/590db27d/attachment.sig>

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2013-12-16 10:52 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-12-15 19:23 [PATCH v3] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board Hans de Goede
2013-12-16 10:52 ` Maxime Ripard

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.