* [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
@ 2013-12-23 19:28 Fabio Estevam
2013-12-23 19:28 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 Fabio Estevam
2013-12-24 2:55 ` [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Robin Gong
0 siblings, 2 replies; 5+ messages in thread
From: Fabio Estevam @ 2013-12-23 19:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
mx6 sabresd boards have Freescale PFUZE100 regulator, so add support for it.
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 110 +++++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 9dea121..ae04ec2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -165,6 +165,112 @@
};
};
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100 at 08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -223,6 +329,10 @@
fsl,pins = <MX6QDL_I2C1_PINGRP2>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <MX6QDL_I2C2_PINGRP2>;
+ };
+
pinctrl_i2c3: i2c3grp {
fsl,pins = <MX6QDL_I2C3_PINGRP2>;
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
2013-12-23 19:28 [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Fabio Estevam
@ 2013-12-23 19:28 ` Fabio Estevam
2013-12-24 2:55 ` [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Robin Gong
1 sibling, 0 replies; 5+ messages in thread
From: Fabio Estevam @ 2013-12-23 19:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
PFUZE100 regulator is commonly found on mx6 based designs.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 318c5fb..2c3245e 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -167,6 +167,7 @@ CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
+CONFIG_REGULATOR_PFUZE100=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
--
1.8.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
2013-12-24 2:55 ` [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Robin Gong
@ 2013-12-24 2:55 ` Fabio Estevam
2013-12-24 3:07 ` Robin Gong
0 siblings, 1 reply; 5+ messages in thread
From: Fabio Estevam @ 2013-12-24 2:55 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Dec 24, 2013 at 12:55 AM, Robin Gong <b38343@freescale.com> wrote:
>> + sw2_reg: sw2 {
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <3950000>;
> Should be 3300000, right?
Actually it should be:
sw2_reg: sw2 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <3300000>;
Do you agree?
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
2013-12-23 19:28 [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Fabio Estevam
2013-12-23 19:28 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 Fabio Estevam
@ 2013-12-24 2:55 ` Robin Gong
2013-12-24 2:55 ` Fabio Estevam
1 sibling, 1 reply; 5+ messages in thread
From: Robin Gong @ 2013-12-24 2:55 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Dec 23, 2013 at 05:28:56PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> mx6 sabresd boards have Freescale PFUZE100 regulator, so add support for it.
>
> Signed-off-by: Robin Gong <b38343@freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 110 +++++++++++++++++++++++++++++++++
> 1 file changed, 110 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 9dea121..ae04ec2 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -165,6 +165,112 @@
> };
> };
>
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + pmic: pfuze100 at 08 {
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3950000>;
Should be 3300000, right?
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3b_reg: sw3b {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1975000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + swbst_reg: swbst {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5150000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> &i2c3 {
> clock-frequency = <100000>;
> pinctrl-names = "default";
> @@ -223,6 +329,10 @@
> fsl,pins = <MX6QDL_I2C1_PINGRP2>;
> };
>
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <MX6QDL_I2C2_PINGRP2>;
> + };
> +
> pinctrl_i2c3: i2c3grp {
> fsl,pins = <MX6QDL_I2C3_PINGRP2>;
> };
> --
> 1.8.1.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
2013-12-24 2:55 ` Fabio Estevam
@ 2013-12-24 3:07 ` Robin Gong
0 siblings, 0 replies; 5+ messages in thread
From: Robin Gong @ 2013-12-24 3:07 UTC (permalink / raw)
To: linux-arm-kernel
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
}
On Tue, Dec 24, 2013 at 12:55:09AM -0200, Fabio Estevam wrote:
> On Tue, Dec 24, 2013 at 12:55 AM, Robin Gong <b38343@freescale.com> wrote:
>
> >> + sw2_reg: sw2 {
> >> + regulator-min-microvolt = <800000>;
> >> + regulator-max-microvolt = <3950000>;
> > Should be 3300000, right?
>
> Actually it should be:
>
> sw2_reg: sw2 {
> regulator-min-microvolt = <400000>;
> regulator-max-microvolt = <3300000>;
>
> Do you agree?
>
> Regards,
>
> Fabio Estevam
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-12-24 3:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-12-23 19:28 [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Fabio Estevam
2013-12-23 19:28 ` [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 Fabio Estevam
2013-12-24 2:55 ` [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support Robin Gong
2013-12-24 2:55 ` Fabio Estevam
2013-12-24 3:07 ` Robin Gong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.