* PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
@ 2014-01-14 17:41 Anthony DeRobertis
[not found] ` <52D576E3.8050006-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-14 17:41 UTC (permalink / raw)
To: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
I repeatedly get "No irq handler for vector" since upgrading to 3.12. I
have confirmed it happens in git master as of yesterday morning
(061f49ec2d722f485237870f04544d8bec15a778). Fixed by disabling VT-d quirk.
[please cc me on responses; I'm not subscribed to the list]
DETAILS:
This is on a ASUS Sabertooth X58 board. Ever since upgrading to 3.12,
I've been flooded with messages like:
Jan 5 19:06:46 Zia kernel: [292039.181501] do_IRQ: 1.76 No irq handler
for vector (irq -1)
Jan 5 19:08:26 Zia kernel: [292138.390433] do_IRQ: 2.140 No irq handler
for vector (irq -1)
Jan 5 19:40:16 Zia kernel: [294049.535992] do_IRQ: 1.84 No irq handler
for vector (irq -1)
Jan 5 23:12:18 Zia kernel: [306774.882154] do_IRQ: 1.227 No irq handler
for vector (irq -1)
When first booting 3.12, I got the "This system BIOS has enabled
interrupt remapping on a chipset that contains an erratum making that
feature unstable. To maintain system stability interrupt remapping is
being disabled. Please contact your BIOS vendor for an update" message.
I believe I also got the do_IRQ messages in that configuration, but am
not completely sure.
After seeing that, I rebooted the machine and turned off VT-d in the
BIOS. The warning went away after that. However, the do_IRQ messages are
definitely present in that configuration.
I have found one configuration that stops them. I turned back on VT-d in
the BIOS, and then disabled the fix
"iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets"
(03bbcb2e7e292838bb0244f5a7816d194c911d62).
Also, I am running BIOS version 1402 (the latest), released 2012-08-29,
with the release notes "improve VT-d compatibility issue." The machine
has been perfectly stable, running pre-3.12 kernels with VT-d enabled
(though I'm not sure I'm actually really using that feature, as I
sometimes use KVM, but don't redirect any real hardware to the VMs).
Here is the patch I used to disable the quirk:
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index bab10b1..a5bf817 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -530,10 +530,11 @@ static int __init intel_irq_remapping_supported(void)
"on a chipset that contains an erratum making that\n"
"feature unstable. To maintain system stability\n"
"interrupt remapping is being disabled. Please\n"
- "contact your BIOS vendor for an update\n");
- add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+ "contact your BIOS vendor for an update\n"
+ "Ignoring and leaving enabled anyway!\n");
+ /* add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
disable_irq_remap = 1;
- return 0;
+ return 0; */
}
if (!dmar_ir_support())
SYSTEM INFO:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz
stepping : 5
microcode : 0x19
cpu MHz : 1600.000
cache size : 8192 KB
physical id : 0
siblings : 8
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx f
xsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonsto
p_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dth
erm tpr_shadow vnmi flexpriority ept vpid
bogomips : 5612.59
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
... (repeats through 7)
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
Subsystem: ASUSTeK Computer Inc. Device 836b
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
Kernel driver in use: i7core_edac
00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
00:14.3 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-SERR-
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: ASUSTeK Computer Inc. Device 8436
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-TAbort-SERR-
Kernel driver in use: ahci
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
Kernel driver in use: xhci_hcd
03:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 440] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 83b7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
Kernel driver in use: nouveau
03:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 83b7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
Kernel driver in use: snd_hda_intel
05:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
Kernel driver in use: ahci
07:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 820d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: r8169
07:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR-
Kernel driver in use: firewire_ohci
ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
Subsystem: Intel Corporation Device 8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 1402
Release Date: 08/09/2012
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 8.15
...
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: SABERTOOTH X58
Version: Rev 1.xx
Serial Number: 112835500000084
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52D576E3.8050006-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-16 4:03 ` Alex Williamson
[not found] ` <1389844985.8705.45.camel-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Alex Williamson @ 2014-01-16 4:03 UTC (permalink / raw)
To: Anthony DeRobertis
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA,
nhorman-2XuSBdqkA4R54TAoqtyWWQ
[cc +Neil]
On Tue, 2014-01-14 at 12:41 -0500, Anthony DeRobertis wrote:
> I repeatedly get "No irq handler for vector" since upgrading to 3.12. I
> have confirmed it happens in git master as of yesterday morning
> (061f49ec2d722f485237870f04544d8bec15a778). Fixed by disabling VT-d quirk.
The full dmesg/console log may also prove useful. Thanks,
Alex
> [please cc me on responses; I'm not subscribed to the list]
>
> DETAILS:
>
> This is on a ASUS Sabertooth X58 board. Ever since upgrading to 3.12,
> I've been flooded with messages like:
>
> Jan 5 19:06:46 Zia kernel: [292039.181501] do_IRQ: 1.76 No irq handler
> for vector (irq -1)
> Jan 5 19:08:26 Zia kernel: [292138.390433] do_IRQ: 2.140 No irq handler
> for vector (irq -1)
> Jan 5 19:40:16 Zia kernel: [294049.535992] do_IRQ: 1.84 No irq handler
> for vector (irq -1)
> Jan 5 23:12:18 Zia kernel: [306774.882154] do_IRQ: 1.227 No irq handler
> for vector (irq -1)
>
> When first booting 3.12, I got the "This system BIOS has enabled
> interrupt remapping on a chipset that contains an erratum making that
> feature unstable. To maintain system stability interrupt remapping is
> being disabled. Please contact your BIOS vendor for an update" message.
> I believe I also got the do_IRQ messages in that configuration, but am
> not completely sure.
>
> After seeing that, I rebooted the machine and turned off VT-d in the
> BIOS. The warning went away after that. However, the do_IRQ messages are
> definitely present in that configuration.
>
> I have found one configuration that stops them. I turned back on VT-d in
> the BIOS, and then disabled the fix
> "iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets"
> (03bbcb2e7e292838bb0244f5a7816d194c911d62).
>
> Also, I am running BIOS version 1402 (the latest), released 2012-08-29,
> with the release notes "improve VT-d compatibility issue." The machine
> has been perfectly stable, running pre-3.12 kernels with VT-d enabled
> (though I'm not sure I'm actually really using that feature, as I
> sometimes use KVM, but don't redirect any real hardware to the VMs).
>
> Here is the patch I used to disable the quirk:
>
> diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> index bab10b1..a5bf817 100644
> --- a/drivers/iommu/intel_irq_remapping.c
> +++ b/drivers/iommu/intel_irq_remapping.c
> @@ -530,10 +530,11 @@ static int __init intel_irq_remapping_supported(void)
> "on a chipset that contains an erratum making that\n"
> "feature unstable. To maintain system stability\n"
> "interrupt remapping is being disabled. Please\n"
> - "contact your BIOS vendor for an update\n");
> - add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> + "contact your BIOS vendor for an update\n"
> + "Ignoring and leaving enabled anyway!\n");
> + /* add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> disable_irq_remap = 1;
> - return 0;
> + return 0; */
> }
>
> if (!dmar_ir_support())
>
>
> SYSTEM INFO:
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 26
> model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz
> stepping : 5
> microcode : 0x19
> cpu MHz : 1600.000
> cache size : 8192 KB
> physical id : 0
> siblings : 8
> core id : 0
> cpu cores : 4
> apicid : 0
> initial apicid : 0
> fpu : yes
> fpu_exception : yes
> cpuid level : 11
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx f
> xsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonsto
> p_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dth
> erm tpr_shadow vnmi flexpriority ept vpid
> bogomips : 5612.59
> clflush size : 64
> cache_alignment : 64
> address sizes : 36 bits physical, 48 bits virtual
> power management:
>
> ... (repeats through 7)
>
>
>
>
>
> 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
> Subsystem: ASUSTeK Computer Inc. Device 836b
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
>
> 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities:
> Kernel driver in use: pcieport
>
> 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) (prog-if 00 [Normal decode])
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities:
> Kernel driver in use: pcieport
>
> 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities:
> Kernel driver in use: pcieport
>
> 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities:
> Kernel driver in use: pcieport
>
> 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) (prog-if 00 [8259])
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> Kernel driver in use: i7core_edac
>
> 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) (prog-if 00 [8259])
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
>
> 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) (prog-if 00 [8259])
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
>
> 00:14.3 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers (rev 13) (prog-if 00 [8259])
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-SERR-
> Kernel driver in use: uhci_hcd
>
> 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: uhci_hcd
>
> 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: uhci_hcd
>
> 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: ehci-pci
>
> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
> Subsystem: ASUSTeK Computer Inc. Device 8436
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> Kernel driver in use: snd_hda_intel
>
> 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities:
> Kernel driver in use: pcieport
>
> 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities:
> Kernel driver in use: pcieport
>
> 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: uhci_hcd
>
> 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: ehci-pci
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities:
>
> 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: lpc_ich
>
> 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0])
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: ahci
>
> 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
> Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-TAbort-SERR-
> Kernel driver in use: ahci
>
> 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI])
> Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> Kernel driver in use: xhci_hcd
>
> 03:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 440] (rev a1) (prog-if 00 [VGA controller])
> Subsystem: ASUSTeK Computer Inc. Device 83b7
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> Kernel driver in use: nouveau
>
> 03:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
> Subsystem: ASUSTeK Computer Inc. Device 83b7
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> Kernel driver in use: snd_hda_intel
>
> 05:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0])
> Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> Kernel driver in use: ahci
>
> 07:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
> Subsystem: ASUSTeK Computer Inc. Device 820d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: r8169
>
> 07:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
> Subsystem: ASUSTeK Computer Inc. Motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR-
> Kernel driver in use: firewire_ohci
>
> ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
> Subsystem: Intel Corporation Device 8086
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-
>
>
>
>
>
> Handle 0x0000, DMI type 0, 24 bytes
> BIOS Information
> Vendor: American Megatrends Inc.
> Version: 1402
> Release Date: 08/09/2012
> Address: 0xF0000
> Runtime Size: 64 kB
> ROM Size: 2048 kB
> Characteristics:
> ISA is supported
> PCI is supported
> PNP is supported
> APM is supported
> BIOS is upgradeable
> BIOS shadowing is allowed
> ESCD support is available
> Boot from CD is supported
> Selectable boot is supported
> BIOS ROM is socketed
> EDD is supported
> 5.25"/1.2 MB floppy services are supported (int 13h)
> 3.5"/720 kB floppy services are supported (int 13h)
> 3.5"/2.88 MB floppy services are supported (int 13h)
> Print screen service is supported (int 5h)
> 8042 keyboard services are supported (int 9h)
> Serial services are supported (int 14h)
> Printer services are supported (int 17h)
> CGA/mono video services are supported (int 10h)
> ACPI is supported
> USB legacy is supported
> LS-120 boot is supported
> ATAPI Zip drive boot is supported
> BIOS boot specification is supported
> Targeted content distribution is supported
> BIOS Revision: 8.15
>
> ...
>
> Handle 0x0002, DMI type 2, 15 bytes
> Base Board Information
> Manufacturer: ASUSTeK Computer INC.
> Product Name: SABERTOOTH X58
> Version: Rev 1.xx
> Serial Number: 112835500000084
> Asset Tag: To Be Filled By O.E.M.
> Features:
> Board is a hosting board
> Board is replaceable
> Location In Chassis: To Be Filled By O.E.M.
> Chassis Handle: 0x0003
> Type: Motherboard
> Contained Object Handles: 0
>
>
> _______________________________________________
> iommu mailing list
> iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <1389844985.8705.45.camel-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>
@ 2014-01-16 12:16 ` Neil Horman
[not found] ` <20140116121617.GA9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Neil Horman @ 2014-01-16 12:16 UTC (permalink / raw)
To: Alex Williamson
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA, Anthony DeRobertis
On Wed, Jan 15, 2014 at 09:03:05PM -0700, Alex Williamson wrote:
> [cc +Neil]
>
> On Tue, 2014-01-14 at 12:41 -0500, Anthony DeRobertis wrote:
> > I repeatedly get "No irq handler for vector" since upgrading to 3.12. I
> > have confirmed it happens in git master as of yesterday morning
> > (061f49ec2d722f485237870f04544d8bec15a778). Fixed by disabling VT-d quirk.
>
> The full dmesg/console log may also prove useful. Thanks,
>
Agreed, I'd like to see the full dmesg log from both a boot that has VT-D
enabled in the bios, and then again with it disabled in the bios. I would also
be interested to know if enabling VT-D in the bios, and adding nointremap to the
kernel command line reproduces the problem. What I read below indicates:
1) Disabling VT-D in the bios makes it appear disabled to software, but the
system still behaves as though its enabled (i.e. symptoms of using the broken
hardware are still present)
2) Enabling VT-D in bios, and modifying the kernel to allow it to remain enabled
allows allows the system to function without the symptoms of the broken
hardware.
I'm having trouble getting my head around those two conditions as they seem to
contradict each other. Its like the sense of the bios switch is reversed (i.e.
setting VT-D enabled in the bios actually disables it, and vice versa).
Neil
> Alex
>
> > [please cc me on responses; I'm not subscribed to the list]
> >
> > DETAILS:
> >
> > This is on a ASUS Sabertooth X58 board. Ever since upgrading to 3.12,
> > I've been flooded with messages like:
> >
> > Jan 5 19:06:46 Zia kernel: [292039.181501] do_IRQ: 1.76 No irq handler
> > for vector (irq -1)
> > Jan 5 19:08:26 Zia kernel: [292138.390433] do_IRQ: 2.140 No irq handler
> > for vector (irq -1)
> > Jan 5 19:40:16 Zia kernel: [294049.535992] do_IRQ: 1.84 No irq handler
> > for vector (irq -1)
> > Jan 5 23:12:18 Zia kernel: [306774.882154] do_IRQ: 1.227 No irq handler
> > for vector (irq -1)
> >
> > When first booting 3.12, I got the "This system BIOS has enabled
> > interrupt remapping on a chipset that contains an erratum making that
> > feature unstable. To maintain system stability interrupt remapping is
> > being disabled. Please contact your BIOS vendor for an update" message.
> > I believe I also got the do_IRQ messages in that configuration, but am
> > not completely sure.
> >
> > After seeing that, I rebooted the machine and turned off VT-d in the
> > BIOS. The warning went away after that. However, the do_IRQ messages are
> > definitely present in that configuration.
> >
> > I have found one configuration that stops them. I turned back on VT-d in
> > the BIOS, and then disabled the fix
> > "iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets"
> > (03bbcb2e7e292838bb0244f5a7816d194c911d62).
> >
> > Also, I am running BIOS version 1402 (the latest), released 2012-08-29,
> > with the release notes "improve VT-d compatibility issue." The machine
> > has been perfectly stable, running pre-3.12 kernels with VT-d enabled
> > (though I'm not sure I'm actually really using that feature, as I
> > sometimes use KVM, but don't redirect any real hardware to the VMs).
> >
> > Here is the patch I used to disable the quirk:
> >
> > diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> > index bab10b1..a5bf817 100644
> > --- a/drivers/iommu/intel_irq_remapping.c
> > +++ b/drivers/iommu/intel_irq_remapping.c
> > @@ -530,10 +530,11 @@ static int __init intel_irq_remapping_supported(void)
> > "on a chipset that contains an erratum making that\n"
> > "feature unstable. To maintain system stability\n"
> > "interrupt remapping is being disabled. Please\n"
> > - "contact your BIOS vendor for an update\n");
> > - add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> > + "contact your BIOS vendor for an update\n"
> > + "Ignoring and leaving enabled anyway!\n");
> > + /* add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> > disable_irq_remap = 1;
> > - return 0;
> > + return 0; */
> > }
> >
> > if (!dmar_ir_support())
> >
> >
> > SYSTEM INFO:
> >
> > processor : 0
> > vendor_id : GenuineIntel
> > cpu family : 6
> > model : 26
> > model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz
> > stepping : 5
> > microcode : 0x19
> > cpu MHz : 1600.000
> > cache size : 8192 KB
> > physical id : 0
> > siblings : 8
> > core id : 0
> > cpu cores : 4
> > apicid : 0
> > initial apicid : 0
> > fpu : yes
> > fpu_exception : yes
> > cpuid level : 11
> > wp : yes
> > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx f
> > xsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonsto
> > p_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dth
> > erm tpr_shadow vnmi flexpriority ept vpid
> > bogomips : 5612.59
> > clflush size : 64
> > cache_alignment : 64
> > address sizes : 36 bits physical, 48 bits virtual
> > power management:
> >
> > ... (repeats through 7)
> >
> >
> >
> >
> >
> > 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
> > Subsystem: ASUSTeK Computer Inc. Device 836b
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> >
> > 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities:
> > Kernel driver in use: pcieport
> >
> > 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) (prog-if 00 [Normal decode])
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities:
> > Kernel driver in use: pcieport
> >
> > 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities:
> > Kernel driver in use: pcieport
> >
> > 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
> > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities:
> > Kernel driver in use: pcieport
> >
> > 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13) (prog-if 00 [8259])
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> > Kernel driver in use: i7core_edac
> >
> > 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) (prog-if 00 [8259])
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> >
> > 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) (prog-if 00 [8259])
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> >
> > 00:14.3 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers (rev 13) (prog-if 00 [8259])
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-SERR-
> > Kernel driver in use: uhci_hcd
> >
> > 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: uhci_hcd
> >
> > 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: uhci_hcd
> >
> > 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: ehci-pci
> >
> > 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
> > Subsystem: ASUSTeK Computer Inc. Device 8436
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> > Kernel driver in use: snd_hda_intel
> >
> > 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities:
> > Kernel driver in use: pcieport
> >
> > 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities:
> > Kernel driver in use: pcieport
> >
> > 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: uhci_hcd
> >
> > 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: uhci_hcd
> >
> > 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: uhci_hcd
> >
> > 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: ehci-pci
> >
> > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities:
> >
> > 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: lpc_ich
> >
> > 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0])
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: ahci
> >
> > 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
> > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
> > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-TAbort-SERR-
> > Kernel driver in use: ahci
> >
> > 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI])
> > Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> > Kernel driver in use: xhci_hcd
> >
> > 03:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 440] (rev a1) (prog-if 00 [VGA controller])
> > Subsystem: ASUSTeK Computer Inc. Device 83b7
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> > Kernel driver in use: nouveau
> >
> > 03:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
> > Subsystem: ASUSTeK Computer Inc. Device 83b7
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> > Kernel driver in use: snd_hda_intel
> >
> > 05:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0])
> > Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-
> > Kernel driver in use: ahci
> >
> > 07:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
> > Subsystem: ASUSTeK Computer Inc. Device 820d
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: r8169
> >
> > 07:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
> > Subsystem: ASUSTeK Computer Inc. Motherboard
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-SERR-
> > Kernel driver in use: firewire_ohci
> >
> > ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05)
> > Subsystem: Intel Corporation Device 8086
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-TAbort-SERR-
> >
> >
> >
> >
> >
> > Handle 0x0000, DMI type 0, 24 bytes
> > BIOS Information
> > Vendor: American Megatrends Inc.
> > Version: 1402
> > Release Date: 08/09/2012
> > Address: 0xF0000
> > Runtime Size: 64 kB
> > ROM Size: 2048 kB
> > Characteristics:
> > ISA is supported
> > PCI is supported
> > PNP is supported
> > APM is supported
> > BIOS is upgradeable
> > BIOS shadowing is allowed
> > ESCD support is available
> > Boot from CD is supported
> > Selectable boot is supported
> > BIOS ROM is socketed
> > EDD is supported
> > 5.25"/1.2 MB floppy services are supported (int 13h)
> > 3.5"/720 kB floppy services are supported (int 13h)
> > 3.5"/2.88 MB floppy services are supported (int 13h)
> > Print screen service is supported (int 5h)
> > 8042 keyboard services are supported (int 9h)
> > Serial services are supported (int 14h)
> > Printer services are supported (int 17h)
> > CGA/mono video services are supported (int 10h)
> > ACPI is supported
> > USB legacy is supported
> > LS-120 boot is supported
> > ATAPI Zip drive boot is supported
> > BIOS boot specification is supported
> > Targeted content distribution is supported
> > BIOS Revision: 8.15
> >
> > ...
> >
> > Handle 0x0002, DMI type 2, 15 bytes
> > Base Board Information
> > Manufacturer: ASUSTeK Computer INC.
> > Product Name: SABERTOOTH X58
> > Version: Rev 1.xx
> > Serial Number: 112835500000084
> > Asset Tag: To Be Filled By O.E.M.
> > Features:
> > Board is a hosting board
> > Board is replaceable
> > Location In Chassis: To Be Filled By O.E.M.
> > Chassis Handle: 0x0003
> > Type: Motherboard
> > Contained Object Handles: 0
> >
> >
> > _______________________________________________
> > iommu mailing list
> > iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> > https://lists.linuxfoundation.org/mailman/listinfo/iommu
>
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140116121617.GA9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
@ 2014-01-16 17:08 ` Anthony DeRobertis
[not found] ` <52D8120D.7090606-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-16 17:17 ` Anthony DeRobertis
1 sibling, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-16 17:08 UTC (permalink / raw)
To: Neil Horman, Alex Williamson
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 680 bytes --]
On 01/16/2014 07:16 AM, Neil Horman wrote:
> Agreed, I'd like to see the full dmesg log from both a boot that has VT-D
> enabled in the bios, and then again with it disabled in the bios. I would also
> be interested to know if enabling VT-D in the bios, and adding nointremap to the
> kernel command line reproduces the problem. What I read below indicates:
Attached are the full dmesg (through boot, anyway) with it off an on in
the BIOS. The "on" one is the current boot (which has my back-out patch
applied, and is working fine...).
I assume you want me to test VT-d on in BIOS, without my back-out patch,
and with the nointremap option? If so, I'll reboot to test that.
[-- Attachment #2: dmesg-vtd-off --]
[-- Type: text/plain, Size: 71052 bytes --]
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #1 SMP Mon Jan 13 13:06:25 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000064 (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf798360 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a820 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 2806.429 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.85 BogoMIPS (lpj=11225716)
[ 0.000123] pid_max: default: 32768 minimum: 301
[ 0.000214] Security Framework initialized
[ 0.000274] AppArmor: AppArmor disabled by boot time parameter
[ 0.000334] Yama: becoming mindful.
[ 0.002282] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010408] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013786] Mount-cache hash table entries: 256
[ 0.014019] Initializing cgroup subsys memory
[ 0.014082] Initializing cgroup subsys devices
[ 0.014141] Initializing cgroup subsys freezer
[ 0.014200] Initializing cgroup subsys blkio
[ 0.014258] Initializing cgroup subsys perf_event
[ 0.014335] CPU: Physical Processor ID: 0
[ 0.014392] CPU: Processor Core ID: 0
[ 0.014453] mce: CPU supports 9 MCE banks
[ 0.014521] CPU0: Thermal monitoring enabled (TM1)
[ 0.014588] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014588] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014588] tlb_flushall_shift: 6
[ 0.014752] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015838] ACPI: Core revision 20131115
[ 0.019326] ACPI: All ACPI Tables successfully acquired
[ 0.063454] Switched APIC routing to physical flat.
[ 0.064022] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.103779] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.210022] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.210254] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.210315] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.210379] ... version: 3
[ 0.210436] ... bit width: 48
[ 0.210494] ... generic registers: 4
[ 0.210551] ... value mask: 0000ffffffffffff
[ 0.210611] ... max period: 000000007fffffff
[ 0.210671] ... fixed-purpose events: 3
[ 0.210728] ... event mask: 000000070000000f
[ 0.211132] x86: Booting SMP configuration:
[ 0.221748] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.226142] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.236906] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.251246] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.211192] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.315109] x86: Booted up 1 node, 8 CPUs
[ 0.315219] smpboot: Total of 8 processors activated (44902.86 BogoMIPS)
[ 0.319810] devtmpfs: initialized
[ 0.323612] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.323837] NET: Registered protocol family 16
[ 0.323967] cpuidle: using governor ladder
[ 0.324025] cpuidle: using governor menu
[ 0.324103] ACPI: bus type PCI registered
[ 0.324161] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.324288] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.324368] PCI: not using MMCONFIG
[ 0.324425] PCI: Using configuration type 1 for base access
[ 0.328290] bio: create slab <bio-0> at 0
[ 0.328463] ACPI: Added _OSI(Module Device)
[ 0.328521] ACPI: Added _OSI(Processor Device)
[ 0.328580] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.328638] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.330317] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.366096] ACPI: SSDT 00000000bf7983a0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.366550] ACPI: Dynamic OEM Table Load:
[ 0.366681] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.366912] ACPI: SSDT 00000000bf79a1c0 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.367263] ACPI: Dynamic OEM Table Load:
[ 0.367395] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.367719] ACPI: Interpreter enabled
[ 0.367783] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.367945] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.368003] ACPI: Using IOAPIC for interrupt routing
[ 0.368080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.369019] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.382810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.383002] ACPI: No dock devices found.
[ 0.388966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.389031] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.389112] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.389461] PCI host bridge to bus 0000:00
[ 0.389520] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.389580] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.389642] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.389703] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.389766] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.389828] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.389891] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.389962] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.390004] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.390075] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.390120] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.390165] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.390251] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.390295] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.390339] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.390424] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.390468] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.390512] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.390600] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.390641] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.390685] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.390774] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.392709] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.392813] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.392899] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.392985] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.393022] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.393111] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.393198] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.393235] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.393317] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.393403] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.393439] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.393520] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.393613] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.393632] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.393711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.393758] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.393846] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.393859] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.393916] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.393983] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.394041] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.394094] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.394182] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.394241] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.394288] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.394375] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.394411] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.394493] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.394579] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.394616] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.394697] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.394783] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.394819] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.394900] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.394995] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.395013] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.395092] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.395138] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.395223] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.395302] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.395389] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.395458] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.395548] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.395612] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.395780] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.395796] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.395803] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.395809] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.395816] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.395822] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.395829] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.395868] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.395936] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.395949] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.395967] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.396077] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.396087] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.396093] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.396100] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.396106] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.396112] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.396119] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.396125] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.396153] pci 0000:01:00.0: PME# supported from D3hot
[ 0.402086] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.402150] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.402156] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.402207] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.402222] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.402292] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.410107] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.410177] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.410238] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.410248] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.410257] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.410266] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.410272] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.410278] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.410350] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.410358] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.418116] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.418184] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.418186] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.418190] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.418237] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.418342] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.418407] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.418487] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.418515] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.418527] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.418540] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.418552] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.418565] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.418577] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.418590] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.418640] pci 0000:05:00.0: PME# supported from D3hot
[ 0.426129] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.426196] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.426200] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.426255] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.426272] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.426281] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.426316] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.426349] pci 0000:07:01.0: supports D1 D2
[ 0.426350] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.426391] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.426406] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.426415] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.426476] pci 0000:07:02.0: supports D2
[ 0.426477] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.426534] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.426598] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.426601] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.426606] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.426608] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.426609] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.426611] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.426612] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.426614] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.427052] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.427559] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.428064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.428569] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.429075] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.429582] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.430086] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.430596] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.431139] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.431277] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.431307] Found 1 acpi root devices
[ 0.431378] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.431457] vgaarb: loaded
[ 0.431511] vgaarb: bridge control possible 0000:03:00.0
[ 0.431601] PCI: Using ACPI for IRQ routing
[ 0.436874] PCI: Discovered peer bus ff
[ 0.436932] PCI: root bus ff: using default resources
[ 0.436933] PCI: Probing PCI hardware (bus ff)
[ 0.436950] PCI host bridge to bus 0000:ff
[ 0.437009] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.437070] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.437133] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.437213] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.437244] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.437274] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.437302] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.437331] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.437359] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.437388] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.437416] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.437444] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.437472] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.437501] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.437530] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.437558] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.437589] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.437618] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.437647] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.437674] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.437702] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.437730] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.437767] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.437770] PCI: pci_cache_line_size set to 64 bytes
[ 0.437841] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.437843] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.437924] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.437989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.438235] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.440493] Switched to clocksource hpet
[ 0.443664] pnp: PnP ACPI init
[ 0.443730] ACPI: bus type PNP registered
[ 0.443843] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 0.443906] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.443969] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.444031] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.444094] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.444156] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.444219] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.444256] pnp 00:01: [dma 4]
[ 0.444271] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.444296] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.444313] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.444334] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.444411] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.444473] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444658] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.444721] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.444782] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.444844] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.444906] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.444968] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.445030] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.445092] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.445157] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.445204] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.445257] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.445320] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.445402] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.445465] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.445528] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.445681] pnp 00:0b: [dma 0 disabled]
[ 0.445728] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.445769] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.445829] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.445892] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.446044] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.446107] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.446170] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.446233] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.446296] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.446359] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.446457] pnp: PnP ACPI: found 15 devices
[ 0.446514] ACPI: bus type PNP unregistered
[ 0.452437] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.452439] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.452447] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.452459] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.452527] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.452528] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.452530] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.452533] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.452596] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.452673] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.452735] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.452795] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.452858] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.452924] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.452985] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.453050] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.453110] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.453172] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.453236] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.453315] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.453379] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.453439] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.453502] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.453566] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.453647] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.453723] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.453783] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.453846] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.453910] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.453990] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.454049] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.454113] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.454180] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.454181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.454183] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.454184] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.454186] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.454187] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.454189] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.454190] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.454192] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.454193] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.454195] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.454196] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.454198] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.454200] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.454201] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.454203] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.454204] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.454206] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.454207] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.454209] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.454210] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.454212] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.454213] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.454215] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.454216] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.454217] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.454220] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.454222] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.454293] NET: Registered protocol family 2
[ 0.454610] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.455124] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.455301] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.455375] TCP: reno registered
[ 0.455457] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.455621] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.455838] NET: Registered protocol family 1
[ 0.459310] pci 0000:03:00.0: Boot video device
[ 0.459325] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.459380] Unpacking initramfs...
[ 0.731380] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
[ 0.731460] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.731522] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.731833] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.731897] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.731962] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.732027] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.732092] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.732157] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.732220] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.732285] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.732380] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[ 0.732758] audit: initializing netlink socket (disabled)
[ 0.732825] type=2000 audit(1389638541.592:1): initialized
[ 0.747480] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.748301] VFS: Disk quotas dquot_6.5.2
[ 0.748386] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.748515] msgmni has been set to 32768
[ 0.749973] alg: No test for stdrng (krng)
[ 0.750051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.750162] io scheduler noop registered
[ 0.750219] io scheduler deadline registered
[ 0.750299] io scheduler cfq registered (default)
[ 0.750527] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.750710] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.750851] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 0.750913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.750983] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.751064] intel_idle: MWAIT substates: 0x1120
[ 0.751072] intel_idle: v0.4 model 0x1A
[ 0.751073] intel_idle: lapic_timer_reliable_states 0x2
[ 0.751234] GHES: HEST is not enabled!
[ 0.751330] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.775175] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.775570] Linux agpgart interface v0.103
[ 0.775723] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.775785] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.776346] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.776479] mousedev: PS/2 mouse device common for all mice
[ 0.776569] rtc_cmos 00:02: RTC can wake from S4
[ 0.776733] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.776815] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.776899] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
[ 0.776961] AMD IOMMUv2 functionality not available on this system
[ 0.777093] TCP: cubic registered
[ 0.778630] NET: Registered protocol family 10
[ 0.779444] mip6: Mobile IPv6
[ 0.779501] NET: Registered protocol family 17
[ 0.779560] mpls_gso: MPLS GSO support
[ 0.779955] registered taskstats version 1
[ 0.781236] rtc_cmos 00:02: setting system clock to 2014-01-13 18:42:22 UTC (1389638542)
[ 0.781331] PM: Hibernation image not present or could not be loaded.
[ 0.782387] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.782465] Write protecting the kernel read-only data: 8192k
[ 0.785651] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.786939] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.801349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.849653] systemd-udevd[95]: starting version 204
[ 0.870471] ACPI: bus type USB registered
[ 0.870549] usbcore: registered new interface driver usbfs
[ 0.870614] usbcore: registered new interface driver hub
[ 0.870974] SCSI subsystem initialized
[ 0.873746] usbcore: registered new device driver usb
[ 0.873907] libata version 3.00 loaded.
[ 0.874181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.874621] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.874850] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.874853] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.874859] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.874990] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
[ 0.874996] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
[ 0.875002] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.875008] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.875013] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.875018] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.875024] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.875030] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.875063] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 0.875156] ehci-pci: EHCI PCI platform driver
[ 0.875163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.875165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.875166] usb usb1: Product: xHCI Host Controller
[ 0.875167] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.875168] usb usb1: SerialNumber: 0000:02:00.0
[ 0.875180] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.875328] hub 1-0:1.0: USB hub found
[ 0.875337] hub 1-0:1.0: 2 ports detected
[ 0.875430] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.875434] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.876662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.876727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876804] usb usb2: Product: UHCI Host Controller
[ 0.876864] usb usb2: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.876925] usb usb2: SerialNumber: 0000:00:1a.0
[ 0.877660] hub 2-0:1.0: USB hub found
[ 0.877727] hub 2-0:1.0: 2 ports detected
[ 0.878118] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.878182] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.878290] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.878391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.878455] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.878538] usb usb4: Product: UHCI Host Controller
[ 0.878598] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.878660] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.878827] hub 4-0:1.0: USB hub found
[ 0.878894] hub 4-0:1.0: 2 ports detected
[ 0.879054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.879120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879154] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.879258] usb usb3: Product: xHCI Host Controller
[ 0.879319] usb usb3: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.879382] usb usb3: SerialNumber: 0000:02:00.0
[ 0.879539] hub 3-0:1.0: USB hub found
[ 0.879608] hub 3-0:1.0: 2 ports detected
[ 0.879857] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.879968] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.880079] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.880144] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880225] usb usb5: Product: UHCI Host Controller
[ 0.880289] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.880355] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.880880] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.881011] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.881174] hub 5-0:1.0: USB hub found
[ 0.881244] hub 5-0:1.0: 2 ports detected
[ 0.881333] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003040000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.881418] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.881507] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.881576] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.881686] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.881795] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.881862] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.881942] usb usb6: Product: UHCI Host Controller
[ 0.882004] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.882068] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.882235] hub 6-0:1.0: USB hub found
[ 0.882358] hub 6-0:1.0: 2 ports detected
[ 0.882571] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.882639] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.882738] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.882829] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.882892] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882969] usb usb7: Product: UHCI Host Controller
[ 0.883032] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.883096] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.883252] hub 7-0:1.0: USB hub found
[ 0.883318] hub 7-0:1.0: 2 ports detected
[ 0.883807] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.883873] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
[ 0.883963] ehci-pci 0000:00:1a.7: debug port 1
[ 0.887915] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.887921] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.896701] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.896789] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.896852] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.896929] usb usb8: Product: EHCI Host Controller
[ 0.896989] usb usb8: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.897050] usb usb8: SerialNumber: 0000:00:1a.7
[ 0.897203] hub 8-0:1.0: USB hub found
[ 0.897265] hub 8-0:1.0: 6 ports detected
[ 0.920854] hub 2-0:1.0: USB hub found
[ 0.920918] hub 2-0:1.0: 2 ports detected
[ 0.944839] hub 4-0:1.0: USB hub found
[ 0.944909] hub 4-0:1.0: 2 ports detected
[ 0.952836] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.968937] hub 5-0:1.0: USB hub found
[ 0.969000] hub 5-0:1.0: 2 ports detected
[ 0.969339] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.969403] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
[ 0.969488] ehci-pci 0000:00:1d.7: debug port 1
[ 0.973451] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.973459] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 0.984891] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.984994] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.985063] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.985139] usb usb9: Product: EHCI Host Controller
[ 0.985198] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.985259] usb usb9: SerialNumber: 0000:00:1d.7
[ 0.985559] hub 9-0:1.0: USB hub found
[ 0.985626] hub 9-0:1.0: 6 ports detected
[ 1.008858] hub 6-0:1.0: USB hub found
[ 1.008928] hub 6-0:1.0: 2 ports detected
[ 1.032916] hub 7-0:1.0: USB hub found
[ 1.032981] hub 7-0:1.0: 2 ports detected
[ 1.034350] ahci 0000:00:1f.2: version 3.0
[ 1.034519] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
[ 1.034584] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.034664] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.073365] scsi0 : ahci
[ 1.074147] scsi1 : ahci
[ 1.074398] scsi2 : ahci
[ 1.074658] scsi3 : ahci
[ 1.074884] scsi4 : ahci
[ 1.075139] scsi5 : ahci
[ 1.075258] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
[ 1.075339] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
[ 1.075416] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
[ 1.075493] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
[ 1.075570] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
[ 1.075647] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
[ 1.075798] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
[ 1.075810] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 1.075881] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.075947] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 1.076046] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 1.076143] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.076207] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.076284] usb usb10: Product: UHCI Host Controller
[ 1.076344] usb usb10: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 1.076405] usb usb10: SerialNumber: 0000:00:1d.2
[ 1.076601] hub 10-0:1.0: USB hub found
[ 1.076665] hub 10-0:1.0: 2 ports detected
[ 1.092851] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.092936] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 1.093740] scsi6 : ahci
[ 1.094057] scsi7 : ahci
[ 1.094320] scsi8 : ahci
[ 1.094581] scsi9 : ahci
[ 1.094843] scsi10 : ahci
[ 1.095133] scsi11 : ahci
[ 1.095388] scsi12 : ahci
[ 1.095623] scsi13 : ahci
[ 1.095730] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
[ 1.095810] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
[ 1.095887] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
[ 1.095964] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
[ 1.096041] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
[ 1.096118] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
[ 1.096195] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
[ 1.096272] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
[ 1.096462] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.096541] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.096856] scsi14 : ahci
[ 1.097115] scsi15 : ahci
[ 1.097232] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 1.097313] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 1.412916] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.413001] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.416958] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.417039] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.417054] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.417176] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.417255] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.417362] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.417648] ata14.00: configured for UDMA/66
[ 1.420870] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.420883] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.424964] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.454190] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.565063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.565144] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.565218] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.565291] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.565363] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.565434] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.566336] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.566410] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.566494] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.566556] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.566666] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.566728] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.566796] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.566859] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.566930] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.566992] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.567713] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.567790] ata2.00: applying bridge limits
[ 1.568102] ata3.00: configured for UDMA/133
[ 1.568269] ata6.00: configured for UDMA/133
[ 1.570063] ata1.00: configured for UDMA/133
[ 1.570211] ata4.00: configured for UDMA/133
[ 1.570435] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.570584] ata5.00: configured for UDMA/133
[ 1.572710] ata2.00: configured for UDMA/33
[ 1.574865] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.575517] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.575957] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.576488] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.576820] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.577616] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.583764] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.583854] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.583938] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.584056] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.584162] scsi 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.584258] scsi 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.584356] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.584583] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.584738] sd 0:0:0:0: [sda] Write Protect is off
[ 1.584799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.584828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.588821] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.588909] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.589043] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.589170] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.589179] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.589208] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.589226] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.589227] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.589232] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.589270] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.589281] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.589283] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.589317] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.589328] sd 5:0:0:0: [sde] Write Protect is off
[ 1.589330] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.589354] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.589973] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.590035] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.590062] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.594912] sda: sda1 sda2 sda3
[ 1.595522] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.596944] sde: sde1 sde2 sde3
[ 1.597674] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.597871] sdc: sdc1 sdc2 sdc3
[ 1.598533] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.598642] sdd: sdd1 sdd2 sdd3
[ 1.599462] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.603289] sdb: sdb1 sdb2 sdb3
[ 1.603968] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.728936] tsc: Refined TSC clocksource calibration: 2806.363 MHz
[ 1.797109] usb 10-1: new low-speed USB device number 2 using uhci_hcd
[ 1.862619] random: nonblocking pool is initialized
[ 1.974452] usb 10-1: New USB device found, idVendor=046d, idProduct=c01e
[ 1.974521] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.974602] usb 10-1: Product: USB-PS/2 Optical Mouse
[ 1.974661] usb 10-1: Manufacturer: Logitech
[ 1.980969] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.997580] usbcore: registered new interface driver usbhid
[ 1.997644] usbhid: USB HID core driver
[ 2.001421] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input1
[ 2.001597] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.054534] md: md127 stopped.
[ 2.057251] md: bind<sdc3>
[ 2.057496] md: bind<sdb3>
[ 2.057900] md: bind<sdd3>
[ 2.058172] md: bind<sde3>
[ 2.069225] md: bind<sda3>
[ 2.070712] md: raid10 personality registered for level 10
[ 2.071529] md/raid10:md127: active with 4 out of 4 devices
[ 2.071736] created bitmap (466 pages) for device md127
[ 2.112065] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 2.139112] md127: detected capacity change from 0 to 1999877701632
[ 2.139234] RAID10 conf printout:
[ 2.139235] --- wd:4 rd:4
[ 2.139237] disk 0, wo:0, o:1, dev:sda3
[ 2.139238] disk 1, wo:0, o:1, dev:sdc3
[ 2.139240] disk 2, wo:0, o:1, dev:sdb3
[ 2.139241] disk 3, wo:0, o:1, dev:sdd3
[ 2.140652] md127: unknown partition table
[ 2.175795] device-mapper: uevent: version 1.0.3
[ 2.175915] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 2.217251] usb 10-2: new low-speed USB device number 3 using uhci_hcd
[ 2.310294] bio: create slab <bio-1> at 1
[ 2.375244] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.522645] usb 10-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.522714] usb 10-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.522794] usb 10-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.522856] usb 10-2: Manufacturer: American Power Conversion
[ 2.522916] usb 10-2: SerialNumber: JB0539032829
[ 2.731242] Switched to clocksource tsc
[ 3.593537] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 13.839354] systemd-udevd[625]: starting version 204
[ 14.427591] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 14.427673] ACPI: Power Button [PWRB]
[ 14.427763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.427840] ACPI: Power Button [PWRF]
[ 14.439625] ATK0110 ATK0110:00: Overriding interface detection
[ 14.460048] wmi: Mapper loaded
[ 14.464721] EDAC MC: Ver: 3.0.0
[ 14.477876] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 14.478006] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 14.478097] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 14.489458] systemd-udevd[686]: renamed network interface eth0 to lan
[ 14.501227] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 14.501388] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.501470] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.501627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.501707] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.501864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.501944] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.511300] [drm] Initialized drm 1.1.0 20060810
[ 14.536083] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 14.536244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.555738] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 14.635305] iTCO_vendor_support: vendor-support=0
[ 14.680094] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 14.680175] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 14.680314] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 14.705616] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.871767] nouveau: unknown parameter 'perflvl_wr' ignored
[ 14.871980] MXM: GUID detected in BIOS
[ 14.872267] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 14.872329] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 14.872390] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 14.873338] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 14.892345] md: bind<sde1>
[ 14.938280] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 14.938344] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 14.938506] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 14.938568] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 14.938844] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
[ 14.938852] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 14.938940] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061d590000] reclocking of this ram type unsupported
[ 14.939052] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 14.939139] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 14.939227] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 14.943231] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
[ 14.947573] md: bind<sdc1>
[ 14.970337] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 14.970435] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 14.970527] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 14.970641] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 14.970733] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 14.970840] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 14.971088] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 14.979269] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 14.979359] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.979448] [TTM] Initializing pool allocator
[ 14.979535] [TTM] Initializing DMA pool allocator
[ 14.979626] nouveau [ DRM] VRAM: 512 MiB
[ 14.979712] nouveau [ DRM] GART: 1048576 MiB
[ 14.979799] nouveau [ DRM] TMDS table version 2.0
[ 14.979887] nouveau [ DRM] DCB version 4.0
[ 14.979973] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 14.980061] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 14.980149] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 14.980237] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 14.980325] nouveau [ DRM] DCB conn 00: 00001030
[ 14.980474] nouveau [ DRM] DCB conn 01: 00002161
[ 14.980623] nouveau [ DRM] DCB conn 02: 00000200
[ 14.981610] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.981700] [drm] No driver support for vblank timestamp query.
[ 14.996303] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 15.005413] md: bind<sdd1>
[ 15.008206] md: bind<sdb1>
[ 15.043483] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 15.043641] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.043787] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.043937] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.044083] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.044227] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.044372] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 15.044514] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 15.090263] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061fbc5c00
[ 15.090414] fbcon: nouveaufb (fb0) is primary device
[ 15.096053] md: bind<sda1>
[ 15.142331] md: raid1 personality registered for level 1
[ 15.142630] md/raid1:md0: active with 5 out of 5 mirrors
[ 15.142756] created bitmap (16 pages) for device md0
[ 15.143289] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 15.158765] md0: detected capacity change from 0 to 131465216
[ 15.158830] RAID1 conf printout:
[ 15.158831] --- wd:5 rd:5
[ 15.158832] disk 0, wo:0, o:1, dev:sda1
[ 15.158834] disk 1, wo:0, o:1, dev:sdc1
[ 15.158835] disk 2, wo:0, o:1, dev:sdb1
[ 15.158836] disk 3, wo:0, o:1, dev:sdd1
[ 15.158838] disk 4, wo:0, o:1, dev:sde1
[ 15.161088] md0: unknown partition table
[ 15.169957] Console: switching to colour frame buffer device 128x48
[ 15.171037] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 15.171049] nouveau 0000:03:00.0: registered panic notifier
[ 15.171065] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 15.171158] hda_intel: Disabling MSI
[ 15.171178] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 15.985619] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 15.985855] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 15.986079] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 15.986309] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 16.618195] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 16.967621] RAID10 conf printout:
[ 16.967627] --- wd:4 rd:4
[ 16.967631] disk 0, wo:0, o:1, dev:sda3
[ 16.967634] disk 1, wo:0, o:1, dev:sdc3
[ 16.967637] disk 2, wo:0, o:1, dev:sdb3
[ 16.967640] disk 3, wo:0, o:1, dev:sdd3
[ 17.082706] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 17.492574] loop: module loaded
[ 18.896517] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 20.012569] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 20.059635] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 20.128415] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 20.135680] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 20.244279] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.333238] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.388560] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.444331] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 21.412118] Bridge firewalling registered
[ 21.415269] device lan entered promiscuous mode
[ 21.427959] r8169 0000:07:01.0 lan: link down
[ 21.427971] r8169 0000:07:01.0 lan: link down
[ 21.428481] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 21.430800] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 24.341372] r8169 0000:07:01.0 lan: link up
[ 24.341629] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 24.342533] br0: port 1(lan) entered forwarding state
[ 24.343999] br0: port 1(lan) entered forwarding state
[ 24.345446] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 25.473310] RPC: Registered named UNIX socket transport module.
[ 25.473448] RPC: Registered udp transport module.
[ 25.473595] RPC: Registered tcp transport module.
[ 25.474057] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.489622] FS-Cache: Loaded
[ 25.517937] FS-Cache: Netfs 'nfs' registered for caching
[ 25.565226] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 26.137517] tun: Universal TUN/TAP device driver, 1.6
[ 26.137660] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
[ 26.344703] br0: port 1(lan) entered forwarding state
[ 37.114777] CacheFiles: Loaded
[ 38.078498] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 38.085722] NFSD: starting 90-second grace period (net ffffffff81885e00)
[ 38.947421] lp: driver loaded but no devices found
[ 38.968982] ppdev: user-space parallel port driver
[-- Attachment #3: dmesg-vtd-on --]
[-- Type: text/plain, Size: 72978 bytes --]
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #5 SMP Mon Jan 13 16:59:58 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b4000-0x37151fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 00006C (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf7984b0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a970 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718520K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438204K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.016000] tsc: Unable to calibrate against PIT
[ 0.016000] tsc: using HPET reference calibration
[ 0.016000] tsc: Detected 2806.296 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.59 BogoMIPS (lpj=11225184)
[ 0.000125] pid_max: default: 32768 minimum: 301
[ 0.000218] Security Framework initialized
[ 0.000279] AppArmor: AppArmor disabled by boot time parameter
[ 0.000340] Yama: becoming mindful.
[ 0.002290] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.008543] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013895] Mount-cache hash table entries: 256
[ 0.014116] Initializing cgroup subsys memory
[ 0.014179] Initializing cgroup subsys devices
[ 0.014239] Initializing cgroup subsys freezer
[ 0.014299] Initializing cgroup subsys blkio
[ 0.014358] Initializing cgroup subsys perf_event
[ 0.014435] CPU: Physical Processor ID: 0
[ 0.014494] CPU: Processor Core ID: 0
[ 0.014555] mce: CPU supports 9 MCE banks
[ 0.014623] CPU0: Thermal monitoring enabled (TM1)
[ 0.014692] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014692] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014692] tlb_flushall_shift: 6
[ 0.014858] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015945] ACPI: Core revision 20131115
[ 0.019435] ACPI: All ACPI Tables successfully acquired
[ 0.063692] dmar: Host address width 39
[ 0.063753] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.063820] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.063900] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.063965] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.064045] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.064108] dmar: RMRR base: 0x000000bf7ea000 end: 0x000000bf7fffff
[ 0.064171] dmar: ATSR flags: 0x0
[ 0.064324] This system BIOS has enabled interrupt remapping
[ 0.064324] on a chipset that contains an erratum making that
[ 0.064324] feature unstable. To maintain system stability
[ 0.064324] interrupt remapping is being disabled. Please
[ 0.064324] contact your BIOS vendor for an update
[ 0.064324] Ignoring and leaving enabled anyway!
[ 0.064500] IOAPIC id 8 under DRHD base 0xfbffe000 IOMMU 1
[ 0.064562] IOAPIC id 9 under DRHD base 0xfbffe000 IOMMU 1
[ 0.064800] Enabled IRQ remapping in xapic mode
[ 0.064862] Switched APIC routing to physical flat.
[ 0.065480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.105236] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.213081] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.213315] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.213377] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.213442] ... version: 3
[ 0.213501] ... bit width: 48
[ 0.213559] ... generic registers: 4
[ 0.213618] ... value mask: 0000ffffffffffff
[ 0.213678] ... max period: 000000007fffffff
[ 0.213739] ... fixed-purpose events: 3
[ 0.213797] ... event mask: 000000070000000f
[ 0.214203] x86: Booting SMP configuration:
[ 0.228684] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.230877] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.246258] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.262803] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.214264] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.323264] x86: Booted up 1 node, 8 CPUs
[ 0.323376] smpboot: Total of 8 processors activated (44900.73 BogoMIPS)
[ 0.329758] devtmpfs: initialized
[ 0.333261] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.333489] NET: Registered protocol family 16
[ 0.333619] cpuidle: using governor ladder
[ 0.333678] cpuidle: using governor menu
[ 0.333758] ACPI: bus type PCI registered
[ 0.333816] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.333946] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.334028] PCI: not using MMCONFIG
[ 0.334086] PCI: Using configuration type 1 for base access
[ 0.334869] bio: create slab <bio-0> at 0
[ 0.335037] ACPI: Added _OSI(Module Device)
[ 0.335097] ACPI: Added _OSI(Processor Device)
[ 0.335155] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.335215] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336890] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.369156] ACPI: SSDT 00000000bf7984f0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.369601] ACPI: Dynamic OEM Table Load:
[ 0.369733] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.369960] ACPI: SSDT 00000000bf79a310 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.370313] ACPI: Dynamic OEM Table Load:
[ 0.370446] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.370768] ACPI: Interpreter enabled
[ 0.370833] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.370997] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.371056] ACPI: Using IOAPIC for interrupt routing
[ 0.371133] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.372067] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.386010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.386201] ACPI: No dock devices found.
[ 0.394051] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.394118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.394201] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.394556] PCI host bridge to bus 0000:00
[ 0.394616] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.394678] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.394740] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.394802] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.394866] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.394930] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.394993] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.395065] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.395108] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.395176] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.395220] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.395265] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.395352] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.395396] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.395440] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.395526] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.395570] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.395614] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.395704] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.395744] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.395788] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.395879] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.395969] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.396058] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.396144] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.396230] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.396267] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.396349] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.396436] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.396475] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.396559] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.396646] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.396682] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.396763] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.396857] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.396876] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.396954] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.397001] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.397090] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.397103] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.397163] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.397231] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.397289] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.397336] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.397425] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.397483] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.397529] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.397618] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.397654] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.397736] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.397824] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.397860] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.397941] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.398028] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.398065] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.398146] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.398240] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.398259] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.398337] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.398384] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.398469] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.398548] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.398636] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.398704] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.398796] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.398861] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.399031] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.399047] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.399054] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.399060] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.399067] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.399073] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.399080] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.399119] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.399185] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.399198] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.399216] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.399325] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.399334] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.399340] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.399347] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.399353] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.399359] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.399366] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.399373] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.399400] pci 0000:01:00.0: PME# supported from D3hot
[ 0.405140] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.405207] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.405209] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.405259] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.405274] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.405345] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.413158] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.413229] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.413290] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.413299] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.413308] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.413317] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.413323] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.413330] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.413400] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.413409] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.421156] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.421222] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.421228] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.421232] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.421267] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.421372] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.421439] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.421518] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.421545] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.421558] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.421570] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.421583] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.421595] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.421608] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.421621] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.421669] pci 0000:05:00.0: PME# supported from D3hot
[ 0.429177] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.429247] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.429250] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.429303] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.429321] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.429329] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.429364] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.429397] pci 0000:07:01.0: supports D1 D2
[ 0.429399] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.429440] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.429455] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.429464] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.429525] pci 0000:07:02.0: supports D2
[ 0.429527] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.429583] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.429648] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.429651] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.429656] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.429657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.429659] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.429661] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.429662] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.429664] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.430102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.430611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.431120] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.431628] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.432135] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.432644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.433152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.433663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.434208] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.434347] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.434378] Found 1 acpi root devices
[ 0.434448] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.434527] vgaarb: loaded
[ 0.434583] vgaarb: bridge control possible 0000:03:00.0
[ 0.434673] PCI: Using ACPI for IRQ routing
[ 0.441771] PCI: Discovered peer bus ff
[ 0.441832] PCI: root bus ff: using default resources
[ 0.441833] PCI: Probing PCI hardware (bus ff)
[ 0.441861] PCI host bridge to bus 0000:ff
[ 0.441921] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.441983] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.442047] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.442130] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.442166] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.442196] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.442224] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.442254] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.442282] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.442310] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.442339] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.442368] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.442396] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.442424] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.442453] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.442481] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.442514] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.442541] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.442570] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.442598] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.442625] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.442653] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.442689] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.442693] PCI: pci_cache_line_size set to 64 bytes
[ 0.442765] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.442767] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.442855] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.442921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.443167] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.447119] Switched to clocksource hpet
[ 0.448454] pnp: PnP ACPI init
[ 0.448523] ACPI: bus type PNP registered
[ 0.448633] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.448698] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.448761] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.448824] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.448888] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.448951] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.449015] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.449053] pnp 00:01: [dma 4]
[ 0.449067] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.449095] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.449111] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.449134] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.449219] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.449282] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449459] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.449522] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.449585] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.449648] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.449710] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.449773] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.449837] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.449900] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449965] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.450013] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.450065] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.450130] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450210] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.450275] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.450338] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450493] pnp 00:0b: [dma 0 disabled]
[ 0.450540] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.450582] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.450642] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.450706] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450857] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.450922] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.450986] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.451050] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.451114] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.451183] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.451281] pnp: PnP ACPI: found 15 devices
[ 0.451340] ACPI: bus type PNP unregistered
[ 0.458308] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.458312] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.458320] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.458334] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.458400] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.458402] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.458404] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.458407] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.458471] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.458550] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.458613] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.458674] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.458738] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.458805] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.458866] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.458933] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.458994] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.459058] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.459131] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.459213] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.459278] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.459339] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.459403] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.459468] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.459550] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.459628] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.459689] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.459753] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.459818] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.459899] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.459960] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.460024] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.460092] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.460094] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.460095] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.460096] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.460098] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.460099] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.460101] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.460103] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.460104] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.460106] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.460107] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.460109] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.460110] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.460112] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.460113] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.460115] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.460117] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.460118] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.460120] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.460121] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.460123] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.460124] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.460126] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.460127] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.460128] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.460130] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.460133] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.460135] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.460213] NET: Registered protocol family 2
[ 0.460539] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.461056] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.461230] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.461307] TCP: reno registered
[ 0.461389] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.461556] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.461774] NET: Registered protocol family 1
[ 0.464540] pci 0000:03:00.0: Boot video device
[ 0.464554] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.464603] Unpacking initramfs...
[ 0.736646] Freeing initrd memory: 14968K (ffff8800362b4000 - ffff880037152000)
[ 0.736750] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.736813] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.737121] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737187] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737253] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737319] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737384] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737450] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737515] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737581] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.737678] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[ 0.738041] audit: initializing netlink socket (disabled)
[ 0.738109] type=2000 audit(1389652889.600:1): initialized
[ 0.752758] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.753588] VFS: Disk quotas dquot_6.5.2
[ 0.753674] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.753805] msgmni has been set to 32768
[ 0.754077] alg: No test for stdrng (krng)
[ 0.754157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.754270] io scheduler noop registered
[ 0.754328] io scheduler deadline registered
[ 0.754407] io scheduler cfq registered (default)
[ 0.754636] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.754824] pcieport 0000:00:1c.0: irq 66 for MSI/MSI-X
[ 0.756806] pcieport 0000:00:1c.4: irq 67 for MSI/MSI-X
[ 0.756885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.756957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.757040] intel_idle: MWAIT substates: 0x1120
[ 0.757051] intel_idle: v0.4 model 0x1A
[ 0.757051] intel_idle: lapic_timer_reliable_states 0x2
[ 0.757218] GHES: HEST is not enabled!
[ 0.757327] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.779389] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.779781] Linux agpgart interface v0.103
[ 0.779936] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.779999] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.780559] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.780691] mousedev: PS/2 mouse device common for all mice
[ 0.780782] rtc_cmos 00:02: RTC can wake from S4
[ 0.780943] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.781026] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.781111] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
[ 0.781174] AMD IOMMUv2 functionality not available on this system
[ 0.781307] TCP: cubic registered
[ 0.781544] NET: Registered protocol family 10
[ 0.781778] mip6: Mobile IPv6
[ 0.781835] NET: Registered protocol family 17
[ 0.781895] mpls_gso: MPLS GSO support
[ 0.782179] registered taskstats version 1
[ 0.783153] rtc_cmos 00:02: setting system clock to 2014-01-13 22:41:30 UTC (1389652890)
[ 0.783258] PM: Hibernation image not present or could not be loaded.
[ 0.783874] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.783953] Write protecting the kernel read-only data: 8192k
[ 0.787091] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.789984] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.803476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.849769] systemd-udevd[95]: starting version 204
[ 0.865521] SCSI subsystem initialized
[ 0.868249] ACPI: bus type USB registered
[ 0.868332] usbcore: registered new interface driver usbfs
[ 0.868407] usbcore: registered new interface driver hub
[ 0.868501] usbcore: registered new device driver usb
[ 0.868960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.869285] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.869367] ehci-pci: EHCI PCI platform driver
[ 0.869516] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.869586] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.869705] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.869815] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.869881] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.869963] usb usb1: Product: UHCI Host Controller
[ 0.870025] usb usb1: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.870090] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.870269] hub 1-0:1.0: USB hub found
[ 0.870338] hub 1-0:1.0: 2 ports detected
[ 0.870451] libata version 3.00 loaded.
[ 0.870478] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.870553] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.870627] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.870632] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 0.870669] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.870720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.870721] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.870723] usb usb3: Product: UHCI Host Controller
[ 0.870724] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.870725] usb usb3: SerialNumber: 0000:00:1a.1
[ 0.870818] hub 3-0:1.0: USB hub found
[ 0.870823] hub 3-0:1.0: 2 ports detected
[ 0.871021] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.871027] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 0.872850] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.872906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.872907] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.872909] usb usb4: Product: UHCI Host Controller
[ 0.872910] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.872911] usb usb4: SerialNumber: 0000:00:1a.2
[ 0.873086] hub 4-0:1.0: USB hub found
[ 0.873092] hub 4-0:1.0: 2 ports detected
[ 0.873310] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.873314] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.873348] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.873449] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.873451] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.873452] usb usb5: Product: UHCI Host Controller
[ 0.873454] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.873455] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.873540] hub 5-0:1.0: USB hub found
[ 0.873547] hub 5-0:1.0: 2 ports detected
[ 0.873741] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.873746] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.873770] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.873815] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.873817] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.873818] usb usb6: Product: UHCI Host Controller
[ 0.873819] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.873821] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.873909] hub 6-0:1.0: USB hub found
[ 0.873916] hub 6-0:1.0: 2 ports detected
[ 0.875118] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.875128] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.875136] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.875144] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.875152] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.875160] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.875168] xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
[ 0.875176] xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
[ 0.875952] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.876018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876096] usb usb2: Product: xHCI Host Controller
[ 0.876157] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.876218] usb usb2: SerialNumber: 0000:02:00.0
[ 0.876407] hub 2-0:1.0: USB hub found
[ 0.876477] hub 2-0:1.0: 2 ports detected
[ 0.876608] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.876672] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7
[ 0.876780] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.876844] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
[ 0.876932] ehci-pci 0000:00:1a.7: debug port 1
[ 0.878310] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.878439] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.878567] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.878640] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.878721] usb usb7: Product: xHCI Host Controller
[ 0.878757] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003074000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.878759] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.878953] usb usb7: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.879019] usb usb7: SerialNumber: 0000:02:00.0
[ 0.879209] hub 7-0:1.0: USB hub found
[ 0.879296] hub 7-0:1.0: 2 ports detected
[ 0.880886] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.880897] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.891320] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.891422] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.891489] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.891571] usb usb8: Product: EHCI Host Controller
[ 0.891634] usb usb8: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.891699] usb usb8: SerialNumber: 0000:00:1a.7
[ 0.891873] hub 8-0:1.0: USB hub found
[ 0.891943] hub 8-0:1.0: 6 ports detected
[ 0.915485] hub 1-0:1.0: USB hub found
[ 0.915550] hub 1-0:1.0: 2 ports detected
[ 0.939414] hub 3-0:1.0: USB hub found
[ 0.939480] hub 3-0:1.0: 2 ports detected
[ 0.951476] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.963469] hub 4-0:1.0: USB hub found
[ 0.963538] hub 4-0:1.0: 2 ports detected
[ 0.963877] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.963942] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
[ 0.964030] ehci-pci 0000:00:1d.7: debug port 1
[ 0.967976] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.967982] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 0.979507] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.979599] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.979674] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.979752] usb usb9: Product: EHCI Host Controller
[ 0.979812] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.979874] usb usb9: SerialNumber: 0000:00:1d.7
[ 0.980177] hub 9-0:1.0: USB hub found
[ 0.980245] hub 9-0:1.0: 6 ports detected
[ 1.003473] hub 5-0:1.0: USB hub found
[ 1.003544] hub 5-0:1.0: 2 ports detected
[ 1.027516] hub 6-0:1.0: USB hub found
[ 1.027582] hub 6-0:1.0: 2 ports detected
[ 1.027914] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.027982] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 1.028084] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 1.028179] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.028243] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.028321] usb usb10: Product: UHCI Host Controller
[ 1.028382] usb usb10: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 1.028444] usb usb10: SerialNumber: 0000:00:1d.2
[ 1.028589] hub 10-0:1.0: USB hub found
[ 1.028653] hub 10-0:1.0: 2 ports detected
[ 1.028852] ahci 0000:00:1f.2: version 3.0
[ 1.029062] ahci 0000:00:1f.2: irq 76 for MSI/MSI-X
[ 1.029067] ahci 0000:00:1f.2: irq 77 for MSI/MSI-X
[ 1.029071] ahci 0000:00:1f.2: irq 78 for MSI/MSI-X
[ 1.029075] ahci 0000:00:1f.2: irq 79 for MSI/MSI-X
[ 1.029079] ahci 0000:00:1f.2: irq 80 for MSI/MSI-X
[ 1.029083] ahci 0000:00:1f.2: irq 81 for MSI/MSI-X
[ 1.029087] ahci 0000:00:1f.2: irq 82 for MSI/MSI-X
[ 1.029091] ahci 0000:00:1f.2: irq 83 for MSI/MSI-X
[ 1.029095] ahci 0000:00:1f.2: irq 84 for MSI/MSI-X
[ 1.029099] ahci 0000:00:1f.2: irq 85 for MSI/MSI-X
[ 1.029102] ahci 0000:00:1f.2: irq 86 for MSI/MSI-X
[ 1.029106] ahci 0000:00:1f.2: irq 87 for MSI/MSI-X
[ 1.029110] ahci 0000:00:1f.2: irq 88 for MSI/MSI-X
[ 1.029114] ahci 0000:00:1f.2: irq 89 for MSI/MSI-X
[ 1.029118] ahci 0000:00:1f.2: irq 90 for MSI/MSI-X
[ 1.029122] ahci 0000:00:1f.2: irq 91 for MSI/MSI-X
[ 1.029191] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.029275] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.069168] scsi0 : ahci
[ 1.069556] scsi1 : ahci
[ 1.069809] scsi2 : ahci
[ 1.070035] scsi3 : ahci
[ 1.072090] scsi4 : ahci
[ 1.072341] scsi5 : ahci
[ 1.072462] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 76
[ 1.072546] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 77
[ 1.072625] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 78
[ 1.072703] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 79
[ 1.072782] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 80
[ 1.072860] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 81
[ 1.073026] ahci 0000:01:00.0: irq 92 for MSI/MSI-X
[ 1.073037] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 1.088425] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.088508] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 1.089261] scsi6 : ahci
[ 1.089470] scsi7 : ahci
[ 1.089677] scsi8 : ahci
[ 1.089884] scsi9 : ahci
[ 1.090106] scsi10 : ahci
[ 1.090324] scsi11 : ahci
[ 1.090500] scsi12 : ahci
[ 1.090668] scsi13 : ahci
[ 1.090779] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 92
[ 1.090863] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 92
[ 1.090941] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 92
[ 1.091020] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 92
[ 1.091099] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 92
[ 1.091177] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 92
[ 1.091256] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 92
[ 1.091341] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 92
[ 1.091536] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.091618] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.091929] scsi14 : ahci
[ 1.092064] scsi15 : ahci
[ 1.092157] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 1.092238] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 1.411641] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.411660] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.411697] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.411849] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.411925] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.412002] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.412077] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.412153] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.412230] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.412303] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.412589] ata14.00: configured for UDMA/66
[ 1.420153] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.453411] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.563698] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.563781] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.563855] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.563929] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.564002] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.565155] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.565223] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.565341] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.565405] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.565515] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.565579] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.565737] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.565840] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.566642] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.566711] ata2.00: applying bridge limits
[ 1.566925] ata4.00: configured for UDMA/133
[ 1.567108] ata1.00: configured for UDMA/133
[ 1.567215] ata6.00: configured for UDMA/133
[ 1.567292] ata3.00: configured for UDMA/133
[ 1.567469] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.567522] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.569960] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.570027] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.570143] ata2.00: configured for UDMA/33
[ 1.572288] ata5.00: configured for UDMA/133
[ 1.572792] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.573316] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.573729] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.574245] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.574661] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.575264] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.580591] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.580686] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.580780] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.580873] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.580982] scsi 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.581077] scsi 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.581167] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.581468] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.581605] sd 0:0:0:0: [sda] Write Protect is off
[ 1.581667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.581690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.585973] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.586054] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.586210] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.586330] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.586356] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.586368] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.586387] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.586449] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.586451] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.586465] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.586467] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.586475] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.586485] sd 5:0:0:0: [sde] Write Protect is off
[ 1.586487] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.586497] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.586509] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.587245] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.587307] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.587338] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.588698] sdc: sdc1 sdc2 sdc3
[ 1.589496] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.590906] sda: sda1 sda2 sda3
[ 1.591865] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.593481] sde: sde1 sde2 sde3
[ 1.594276] sdd: sdd1 sdd2 sdd3
[ 1.594314] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.594932] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.600418] sdb: sdb1 sdb2 sdb3
[ 1.603051] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.739569] tsc: Refined TSC clocksource calibration: 2806.362 MHz
[ 1.787798] usb 10-1: new low-speed USB device number 2 using uhci_hcd
[ 1.863838] random: nonblocking pool is initialized
[ 1.963523] usb 10-1: New USB device found, idVendor=046d, idProduct=c01e
[ 1.963594] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.963682] usb 10-1: Product: USB-PS/2 Optical Mouse
[ 1.963743] usb 10-1: Manufacturer: Logitech
[ 1.969570] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.985640] usbcore: registered new interface driver usbhid
[ 1.985704] usbhid: USB HID core driver
[ 1.988165] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input1
[ 1.988385] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.093913] md: md127 stopped.
[ 2.096877] md: bind<sdc3>
[ 2.100551] md: bind<sdb3>
[ 2.101002] md: bind<sdd3>
[ 2.101755] md: bind<sde3>
[ 2.103937] md: bind<sda3>
[ 2.105230] md: raid10 personality registered for level 10
[ 2.105640] md/raid10:md127: active with 4 out of 4 devices
[ 2.105963] created bitmap (466 pages) for device md127
[ 2.121928] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 2.149858] md127: detected capacity change from 0 to 1999877701632
[ 2.149959] RAID10 conf printout:
[ 2.149963] --- wd:4 rd:4
[ 2.149966] disk 0, wo:0, o:1, dev:sda3
[ 2.149977] disk 1, wo:0, o:1, dev:sdc3
[ 2.149979] disk 2, wo:0, o:1, dev:sdb3
[ 2.149981] disk 3, wo:0, o:1, dev:sdd3
[ 2.151501] md127: unknown partition table
[ 2.187645] device-mapper: uevent: version 1.0.3
[ 2.187777] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 2.203784] usb 10-2: new low-speed USB device number 3 using uhci_hcd
[ 2.256305] bio: create slab <bio-1> at 1
[ 2.324492] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.509650] usb 10-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.509718] usb 10-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.509797] usb 10-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.509860] usb 10-2: Manufacturer: American Power Conversion
[ 2.509922] usb 10-2: SerialNumber: JB0539032829
[ 2.740221] Switched to clocksource tsc
[ 3.584325] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 13.730195] systemd-udevd[634]: starting version 204
[ 14.230269] wmi: Mapper loaded
[ 14.268895] ATK0110 ATK0110:00: Overriding interface detection
[ 14.273171] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 14.273254] ACPI: Power Button [PWRB]
[ 14.273340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.273419] ACPI: Power Button [PWRF]
[ 14.283478] EDAC MC: Ver: 3.0.0
[ 14.308356] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 14.308466] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 14.308556] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 14.312265] systemd-udevd[674]: renamed network interface eth0 to lan
[ 14.331814] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 14.331979] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.332129] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.332290] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.332373] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.332533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.332618] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.364866] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 14.367777] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 14.367939] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.406498] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.411325] [drm] Initialized drm 1.1.0 20060810
[ 14.518041] iTCO_vendor_support: vendor-support=0
[ 14.525770] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 14.525857] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 14.525998] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 14.625084] snd_hda_intel 0000:00:1b.0: irq 93 for MSI/MSI-X
[ 14.650248] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.650376] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.650493] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.650610] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.650726] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.650842] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.650957] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.651074] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 14.651524] hda_intel: Disabling MSI
[ 14.651597] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 14.709942] nouveau: unknown parameter 'perflvl_wr' ignored
[ 14.710160] MXM: GUID detected in BIOS
[ 14.727614] md: bind<sde1>
[ 14.783015] md: bind<sdb1>
[ 14.789240] md: bind<sda1>
[ 14.794432] md: bind<sdc1>
[ 14.832790] md: bind<sdd1>
[ 14.849298] md: raid1 personality registered for level 1
[ 14.849563] md/raid1:md0: active with 5 out of 5 mirrors
[ 14.853347] created bitmap (16 pages) for device md0
[ 14.864496] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 14.877323] md0: detected capacity change from 0 to 131465216
[ 14.877458] RAID1 conf printout:
[ 14.877462] --- wd:5 rd:5
[ 14.877465] disk 0, wo:0, o:1, dev:sda1
[ 14.877467] disk 1, wo:0, o:1, dev:sdc1
[ 14.877470] disk 2, wo:0, o:1, dev:sdb1
[ 14.877472] disk 3, wo:0, o:1, dev:sdd1
[ 14.877474] disk 4, wo:0, o:1, dev:sde1
[ 14.880346] md0: unknown partition table
[ 15.468103] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 15.468394] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 15.468665] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 15.468937] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 15.471500] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 15.471568] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 15.471633] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 15.474291] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 15.540028] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 15.540098] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 15.540347] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 15.540413] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 15.540890] nouveau 0000:03:00.0: irq 94 for MSI/MSI-X
[ 15.540903] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 15.541001] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061bebc800] reclocking of this ram type unsupported
[ 15.541118] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 15.541209] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 15.541301] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 15.574190] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 15.574286] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 15.574379] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 15.574493] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 15.574585] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 15.574694] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 15.574943] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 15.586865] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 15.586961] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 15.587055] [TTM] Initializing pool allocator
[ 15.587144] [TTM] Initializing DMA pool allocator
[ 15.587236] nouveau [ DRM] VRAM: 512 MiB
[ 15.587322] nouveau [ DRM] GART: 1048576 MiB
[ 15.587411] nouveau [ DRM] TMDS table version 2.0
[ 15.587498] nouveau [ DRM] DCB version 4.0
[ 15.587585] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 15.587674] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 15.587763] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 15.587852] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 15.588002] nouveau [ DRM] DCB conn 00: 00001030
[ 15.588154] nouveau [ DRM] DCB conn 01: 00002161
[ 15.588303] nouveau [ DRM] DCB conn 02: 00000200
[ 15.589281] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.589372] [drm] No driver support for vblank timestamp query.
[ 15.603932] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 15.688554] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061d20f000
[ 15.688759] fbcon: nouveaufb (fb0) is primary device
[ 15.767249] Console: switching to colour frame buffer device 128x48
[ 15.768248] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 15.768260] nouveau 0000:03:00.0: registered panic notifier
[ 15.768282] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 16.284853] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 16.689360] RAID10 conf printout:
[ 16.689365] --- wd:4 rd:4
[ 16.689368] disk 0, wo:0, o:1, dev:sda3
[ 16.689371] disk 1, wo:0, o:1, dev:sdc3
[ 16.689373] disk 2, wo:0, o:1, dev:sdb3
[ 16.689375] disk 3, wo:0, o:1, dev:sdd3
[ 16.797872] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 17.249405] loop: module loaded
[ 18.977520] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 20.193879] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 20.249294] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 20.317238] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 20.354576] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 20.447409] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.519785] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.541961] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.648313] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 21.646283] Bridge firewalling registered
[ 21.649395] device lan entered promiscuous mode
[ 21.662557] r8169 0000:07:01.0 lan: link down
[ 21.662578] r8169 0000:07:01.0 lan: link down
[ 21.663016] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 21.665403] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 24.344231] r8169 0000:07:01.0 lan: link up
[ 24.344492] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 24.345355] br0: port 1(lan) entered forwarding state
[ 24.346969] br0: port 1(lan) entered forwarding state
[ 24.348426] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 25.342865] RPC: Registered named UNIX socket transport module.
[ 25.343045] RPC: Registered udp transport module.
[ 25.343181] RPC: Registered tcp transport module.
[ 25.343600] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.348079] FS-Cache: Loaded
[ 25.369779] FS-Cache: Netfs 'nfs' registered for caching
[ 25.421082] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 25.790688] tun: Universal TUN/TAP device driver, 1.6
[ 25.790907] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
[ 26.351334] br0: port 1(lan) entered forwarding state
[ 38.117820] CacheFiles: Loaded
[ 39.175686] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 39.183577] NFSD: starting 90-second grace period (net ffffffff81885e00)
[-- Attachment #4: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140116121617.GA9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-16 17:08 ` Anthony DeRobertis
@ 2014-01-16 17:17 ` Anthony DeRobertis
1 sibling, 0 replies; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-16 17:17 UTC (permalink / raw)
To: Neil Horman, Alex Williamson
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
I see the file names got lost in the list archive. To be clear:
The one that has
ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT
00000097)
is the one with VT-d on.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52D8120D.7090606-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-16 18:21 ` Neil Horman
[not found] ` <20140116182134.GC9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Neil Horman @ 2014-01-16 18:21 UTC (permalink / raw)
To: Anthony DeRobertis; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Thu, Jan 16, 2014 at 12:08:29PM -0500, Anthony DeRobertis wrote:
> On 01/16/2014 07:16 AM, Neil Horman wrote:
> >Agreed, I'd like to see the full dmesg log from both a boot that has VT-D
> >enabled in the bios, and then again with it disabled in the bios. I would also
> >be interested to know if enabling VT-D in the bios, and adding nointremap to the
> >kernel command line reproduces the problem. What I read below indicates:
> Attached are the full dmesg (through boot, anyway) with it off an on
> in the BIOS. The "on" one is the current boot (which has my back-out
> patch applied, and is working fine...).
>
> I assume you want me to test VT-d on in BIOS, without my back-out
> patch, and with the nointremap option? If so, I'll reboot to test
> that.
Yes, What I would like to see is your backout patch removed, and the the
following tests preformed:
1) VT-D off in bios
2) VT-D on in bios and nointremap specified on the command line
3) VT-D on in bios and nointremap _not_ specified on the command line
If I could see the boot logs for all of those that would be helpful. What would
be particularly helpful is to know if test (2) results in the problem
reproducing. If it does that suggests our ability to disable interrupt
remapping in the kernel is somehow ineffective on your system.
Thanks
Neil
> [ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #1 SMP Mon Jan 13 13:06:25 EST 2014
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.5 present.
> [ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-DFFFF write-protect
> [ 0.000000] E0000-EBFFF write-through
> [ 0.000000] EC000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask C00000000 write-back
> [ 0.000000] 1 base 400000000 mask E00000000 write-back
> [ 0.000000] 2 base 600000000 mask FC0000000 write-back
> [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
> [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
> [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
> [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
> [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
> [ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
> [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
> [ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
> [ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
> [ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
> [ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
> [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
> [ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
> [ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
> [ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
> [ 0.000000] ACPI: XSDT 00000000bf780100 000064 (v01 080912 XSDT1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
> [ 0.000000] ACPI: FACS 00000000bf798000 000040
> [ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
> [ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
> [ 0.000000] ACPI: ASPT 00000000bf798360 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
> [ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
> [ 0.000000] ACPI: SSDT 00000000bf79a820 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
> [ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
> [ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x63fffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> [ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
> [ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
> [ 0.000000] On node 0 totalpages: 6289181
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 10667 pages used for memmap
> [ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
> [ 0.000000] Normal zone: 75264 pages used for memmap
> [ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
> [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 64
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
> [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
> [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
> [ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 100663296 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration failed
> [ 0.008000] tsc: PIT calibration matches HPET. 1 loops
> [ 0.008000] tsc: Detected 2806.429 MHz processor
> [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.85 BogoMIPS (lpj=11225716)
> [ 0.000123] pid_max: default: 32768 minimum: 301
> [ 0.000214] Security Framework initialized
> [ 0.000274] AppArmor: AppArmor disabled by boot time parameter
> [ 0.000334] Yama: becoming mindful.
> [ 0.002282] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
> [ 0.010408] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> [ 0.013786] Mount-cache hash table entries: 256
> [ 0.014019] Initializing cgroup subsys memory
> [ 0.014082] Initializing cgroup subsys devices
> [ 0.014141] Initializing cgroup subsys freezer
> [ 0.014200] Initializing cgroup subsys blkio
> [ 0.014258] Initializing cgroup subsys perf_event
> [ 0.014335] CPU: Physical Processor ID: 0
> [ 0.014392] CPU: Processor Core ID: 0
> [ 0.014453] mce: CPU supports 9 MCE banks
> [ 0.014521] CPU0: Thermal monitoring enabled (TM1)
> [ 0.014588] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
> [ 0.014588] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> [ 0.014588] tlb_flushall_shift: 6
> [ 0.014752] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
> [ 0.015838] ACPI: Core revision 20131115
> [ 0.019326] ACPI: All ACPI Tables successfully acquired
> [ 0.063454] Switched APIC routing to physical flat.
> [ 0.064022] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.103779] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
> [ 0.210022] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
> [ 0.210254] perf_event_intel: CPU erratum AAJ80 worked around
> [ 0.210315] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
> [ 0.210379] ... version: 3
> [ 0.210436] ... bit width: 48
> [ 0.210494] ... generic registers: 4
> [ 0.210551] ... value mask: 0000ffffffffffff
> [ 0.210611] ... max period: 000000007fffffff
> [ 0.210671] ... fixed-purpose events: 3
> [ 0.210728] ... event mask: 000000070000000f
> [ 0.211132] x86: Booting SMP configuration:
> [ 0.221748] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.226142] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.236906] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.251246] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.211192] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
> [ 0.315109] x86: Booted up 1 node, 8 CPUs
> [ 0.315219] smpboot: Total of 8 processors activated (44902.86 BogoMIPS)
> [ 0.319810] devtmpfs: initialized
> [ 0.323612] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
> [ 0.323837] NET: Registered protocol family 16
> [ 0.323967] cpuidle: using governor ladder
> [ 0.324025] cpuidle: using governor menu
> [ 0.324103] ACPI: bus type PCI registered
> [ 0.324161] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.324288] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.324368] PCI: not using MMCONFIG
> [ 0.324425] PCI: Using configuration type 1 for base access
> [ 0.328290] bio: create slab <bio-0> at 0
> [ 0.328463] ACPI: Added _OSI(Module Device)
> [ 0.328521] ACPI: Added _OSI(Processor Device)
> [ 0.328580] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.328638] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.330317] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.366096] ACPI: SSDT 00000000bf7983a0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
> [ 0.366550] ACPI: Dynamic OEM Table Load:
> [ 0.366681] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
> [ 0.366912] ACPI: SSDT 00000000bf79a1c0 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
> [ 0.367263] ACPI: Dynamic OEM Table Load:
> [ 0.367395] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
> [ 0.367719] ACPI: Interpreter enabled
> [ 0.367783] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
> [ 0.367945] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.368003] ACPI: Using IOAPIC for interrupt routing
> [ 0.368080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.369019] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> [ 0.382810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.383002] ACPI: No dock devices found.
> [ 0.388966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.389031] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 0.389112] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> [ 0.389461] PCI host bridge to bus 0000:00
> [ 0.389520] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.389580] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.389642] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.389703] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.389766] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
> [ 0.389828] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
> [ 0.389891] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
> [ 0.389962] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
> [ 0.390004] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> [ 0.390075] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
> [ 0.390120] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.390165] pci 0000:00:01.0: System wakeup disabled by ACPI
> [ 0.390251] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
> [ 0.390295] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> [ 0.390339] pci 0000:00:02.0: System wakeup disabled by ACPI
> [ 0.390424] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
> [ 0.390468] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 0.390512] pci 0000:00:03.0: System wakeup disabled by ACPI
> [ 0.390600] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
> [ 0.390641] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 0.390685] pci 0000:00:07.0: System wakeup disabled by ACPI
> [ 0.390774] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
> [ 0.392709] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
> [ 0.392813] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
> [ 0.392899] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
> [ 0.392985] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
> [ 0.393022] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
> [ 0.393111] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.393198] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
> [ 0.393235] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
> [ 0.393317] pci 0000:00:1a.1: System wakeup disabled by ACPI
> [ 0.393403] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
> [ 0.393439] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
> [ 0.393520] pci 0000:00:1a.2: System wakeup disabled by ACPI
> [ 0.393613] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
> [ 0.393632] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
> [ 0.393711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.393758] pci 0000:00:1a.7: System wakeup disabled by ACPI
> [ 0.393846] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
> [ 0.393859] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
> [ 0.393916] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.393983] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
> [ 0.394041] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.394094] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.394182] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
> [ 0.394241] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.394288] pci 0000:00:1c.4: System wakeup disabled by ACPI
> [ 0.394375] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
> [ 0.394411] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
> [ 0.394493] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.394579] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
> [ 0.394616] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
> [ 0.394697] pci 0000:00:1d.1: System wakeup disabled by ACPI
> [ 0.394783] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
> [ 0.394819] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
> [ 0.394900] pci 0000:00:1d.2: System wakeup disabled by ACPI
> [ 0.394995] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
> [ 0.395013] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
> [ 0.395092] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.395138] pci 0000:00:1d.7: System wakeup disabled by ACPI
> [ 0.395223] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> [ 0.395302] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 0.395389] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
> [ 0.395458] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
> [ 0.395548] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
> [ 0.395612] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
> [ 0.395780] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
> [ 0.395796] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
> [ 0.395803] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
> [ 0.395809] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
> [ 0.395816] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
> [ 0.395822] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
> [ 0.395829] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
> [ 0.395868] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.395936] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
> [ 0.395949] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
> [ 0.395967] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
> [ 0.396077] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
> [ 0.396087] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
> [ 0.396093] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
> [ 0.396100] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
> [ 0.396106] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
> [ 0.396112] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
> [ 0.396119] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
> [ 0.396125] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
> [ 0.396153] pci 0000:01:00.0: PME# supported from D3hot
> [ 0.402086] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.402150] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
> [ 0.402156] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
> [ 0.402207] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
> [ 0.402222] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
> [ 0.402292] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 0.410107] pci 0000:00:02.0: PCI bridge to [bus 02]
> [ 0.410177] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
> [ 0.410238] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
> [ 0.410248] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
> [ 0.410257] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
> [ 0.410266] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
> [ 0.410272] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
> [ 0.410278] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
> [ 0.410350] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
> [ 0.410358] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
> [ 0.418116] pci 0000:00:03.0: PCI bridge to [bus 03]
> [ 0.418184] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
> [ 0.418186] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
> [ 0.418190] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 0.418237] pci 0000:00:07.0: PCI bridge to [bus 04]
> [ 0.418342] pci 0000:00:1c.0: PCI bridge to [bus 06]
> [ 0.418407] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.418487] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
> [ 0.418515] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
> [ 0.418527] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
> [ 0.418540] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
> [ 0.418552] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
> [ 0.418565] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
> [ 0.418577] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
> [ 0.418590] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
> [ 0.418640] pci 0000:05:00.0: PME# supported from D3hot
> [ 0.426129] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [ 0.426196] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.426200] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
> [ 0.426255] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
> [ 0.426272] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
> [ 0.426281] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
> [ 0.426316] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
> [ 0.426349] pci 0000:07:01.0: supports D1 D2
> [ 0.426350] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.426391] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
> [ 0.426406] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
> [ 0.426415] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
> [ 0.426476] pci 0000:07:02.0: supports D2
> [ 0.426477] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
> [ 0.426534] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
> [ 0.426598] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> [ 0.426601] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> [ 0.426606] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 0.426608] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 0.426609] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.426611] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
> [ 0.426612] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
> [ 0.426614] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
> [ 0.427052] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
> [ 0.427559] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.428064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
> [ 0.428569] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
> [ 0.429075] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
> [ 0.429582] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
> [ 0.430086] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
> [ 0.430596] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.431139] ACPI: Enabled 3 GPEs in block 00 to 3F
> [ 0.431277] ACPI: \_SB_.PCI0: notify handler is installed
> [ 0.431307] Found 1 acpi root devices
> [ 0.431378] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.431457] vgaarb: loaded
> [ 0.431511] vgaarb: bridge control possible 0000:03:00.0
> [ 0.431601] PCI: Using ACPI for IRQ routing
> [ 0.436874] PCI: Discovered peer bus ff
> [ 0.436932] PCI: root bus ff: using default resources
> [ 0.436933] PCI: Probing PCI hardware (bus ff)
> [ 0.436950] PCI host bridge to bus 0000:ff
> [ 0.437009] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
> [ 0.437070] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
> [ 0.437133] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
> [ 0.437213] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
> [ 0.437244] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
> [ 0.437274] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
> [ 0.437302] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
> [ 0.437331] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
> [ 0.437359] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
> [ 0.437388] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
> [ 0.437416] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
> [ 0.437444] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
> [ 0.437472] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
> [ 0.437501] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
> [ 0.437530] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
> [ 0.437558] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
> [ 0.437589] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
> [ 0.437618] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
> [ 0.437647] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
> [ 0.437674] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
> [ 0.437702] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
> [ 0.437730] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
> [ 0.437767] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
> [ 0.437770] PCI: pci_cache_line_size set to 64 bytes
> [ 0.437841] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
> [ 0.437843] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
> [ 0.437924] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> [ 0.437989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 0.438235] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> [ 0.440493] Switched to clocksource hpet
> [ 0.443664] pnp: PnP ACPI init
> [ 0.443730] ACPI: bus type PNP registered
> [ 0.443843] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
> [ 0.443906] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
> [ 0.443969] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
> [ 0.444031] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
> [ 0.444094] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
> [ 0.444156] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
> [ 0.444219] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.444256] pnp 00:01: [dma 4]
> [ 0.444271] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.444296] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.444313] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.444334] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.444411] system 00:05: [io 0x0290-0x029f] has been reserved
> [ 0.444473] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.444658] system 00:06: [io 0x04d0-0x04d1] has been reserved
> [ 0.444721] system 00:06: [io 0x0800-0x087f] could not be reserved
> [ 0.444782] system 00:06: [io 0x0500-0x057f] could not be reserved
> [ 0.444844] system 00:06: [io 0x0600-0x0607] has been reserved
> [ 0.444906] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.444968] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 0.445030] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
> [ 0.445092] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.445157] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 0.445204] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
> [ 0.445257] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
> [ 0.445320] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.445402] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.445465] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.445528] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.445681] pnp 00:0b: [dma 0 disabled]
> [ 0.445728] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.445769] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> [ 0.445829] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.445892] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.446044] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.446107] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
> [ 0.446170] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
> [ 0.446233] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
> [ 0.446296] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
> [ 0.446359] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.446457] pnp: PnP ACPI: found 15 devices
> [ 0.446514] ACPI: bus type PNP unregistered
> [ 0.452437] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
> [ 0.452439] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
> [ 0.452447] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
> [ 0.452459] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
> [ 0.452527] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
> [ 0.452528] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> [ 0.452530] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> [ 0.452533] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
> [ 0.452596] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
> [ 0.452673] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
> [ 0.452735] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.452795] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
> [ 0.452858] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
> [ 0.452924] pci 0000:00:02.0: PCI bridge to [bus 02]
> [ 0.452985] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
> [ 0.453050] pci 0000:00:03.0: PCI bridge to [bus 03]
> [ 0.453110] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
> [ 0.453172] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
> [ 0.453236] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 0.453315] pci 0000:00:07.0: PCI bridge to [bus 04]
> [ 0.453379] pci 0000:00:1c.0: PCI bridge to [bus 06]
> [ 0.453439] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
> [ 0.453502] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
> [ 0.453566] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.453647] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
> [ 0.453723] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [ 0.453783] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.453846] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
> [ 0.453910] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
> [ 0.453990] pci 0000:00:1e.0: PCI bridge to [bus 07]
> [ 0.454049] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> [ 0.454113] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> [ 0.454180] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.454181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.454183] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.454184] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.454186] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
> [ 0.454187] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
> [ 0.454189] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
> [ 0.454190] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
> [ 0.454192] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
> [ 0.454193] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
> [ 0.454195] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
> [ 0.454196] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 0.454198] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
> [ 0.454200] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
> [ 0.454201] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.454203] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> [ 0.454204] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
> [ 0.454206] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
> [ 0.454207] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
> [ 0.454209] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
> [ 0.454210] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
> [ 0.454212] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
> [ 0.454213] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.454215] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.454216] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
> [ 0.454217] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
> [ 0.454220] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
> [ 0.454222] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
> [ 0.454293] NET: Registered protocol family 2
> [ 0.454610] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.455124] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.455301] TCP: Hash tables configured (established 262144 bind 65536)
> [ 0.455375] TCP: reno registered
> [ 0.455457] UDP hash table entries: 16384 (order: 7, 524288 bytes)
> [ 0.455621] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
> [ 0.455838] NET: Registered protocol family 1
> [ 0.459310] pci 0000:03:00.0: Boot video device
> [ 0.459325] PCI: CLS mismatch (256 != 64), using 64 bytes
> [ 0.459380] Unpacking initramfs...
> [ 0.731380] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
> [ 0.731460] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.731522] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
> [ 0.731833] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.731897] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.731962] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.732027] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.732092] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.732157] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.732220] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.732285] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.732380] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
> [ 0.732758] audit: initializing netlink socket (disabled)
> [ 0.732825] type=2000 audit(1389638541.592:1): initialized
> [ 0.747480] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.748301] VFS: Disk quotas dquot_6.5.2
> [ 0.748386] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.748515] msgmni has been set to 32768
> [ 0.749973] alg: No test for stdrng (krng)
> [ 0.750051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 0.750162] io scheduler noop registered
> [ 0.750219] io scheduler deadline registered
> [ 0.750299] io scheduler cfq registered (default)
> [ 0.750527] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
> [ 0.750710] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
> [ 0.750851] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
> [ 0.750913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.750983] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.751064] intel_idle: MWAIT substates: 0x1120
> [ 0.751072] intel_idle: v0.4 model 0x1A
> [ 0.751073] intel_idle: lapic_timer_reliable_states 0x2
> [ 0.751234] GHES: HEST is not enabled!
> [ 0.751330] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.775175] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [ 0.775570] Linux agpgart interface v0.103
> [ 0.775723] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 0.775785] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [ 0.776346] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.776479] mousedev: PS/2 mouse device common for all mice
> [ 0.776569] rtc_cmos 00:02: RTC can wake from S4
> [ 0.776733] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 0.776815] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 0.776899] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
> [ 0.776961] AMD IOMMUv2 functionality not available on this system
> [ 0.777093] TCP: cubic registered
> [ 0.778630] NET: Registered protocol family 10
> [ 0.779444] mip6: Mobile IPv6
> [ 0.779501] NET: Registered protocol family 17
> [ 0.779560] mpls_gso: MPLS GSO support
> [ 0.779955] registered taskstats version 1
> [ 0.781236] rtc_cmos 00:02: setting system clock to 2014-01-13 18:42:22 UTC (1389638542)
> [ 0.781331] PM: Hibernation image not present or could not be loaded.
> [ 0.782387] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
> [ 0.782465] Write protecting the kernel read-only data: 8192k
> [ 0.785651] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
> [ 0.786939] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
> [ 0.801349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [ 0.849653] systemd-udevd[95]: starting version 204
> [ 0.870471] ACPI: bus type USB registered
> [ 0.870549] usbcore: registered new interface driver usbfs
> [ 0.870614] usbcore: registered new interface driver hub
> [ 0.870974] SCSI subsystem initialized
> [ 0.873746] usbcore: registered new device driver usb
> [ 0.873907] libata version 3.00 loaded.
> [ 0.874181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.874621] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.874850] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 0.874853] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [ 0.874859] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
> [ 0.874990] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
> [ 0.874996] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
> [ 0.875002] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
> [ 0.875008] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
> [ 0.875013] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
> [ 0.875018] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
> [ 0.875024] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
> [ 0.875030] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
> [ 0.875063] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
> [ 0.875156] ehci-pci: EHCI PCI platform driver
> [ 0.875163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.875165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.875166] usb usb1: Product: xHCI Host Controller
> [ 0.875167] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
> [ 0.875168] usb usb1: SerialNumber: 0000:02:00.0
> [ 0.875180] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
> [ 0.875328] hub 1-0:1.0: USB hub found
> [ 0.875337] hub 1-0:1.0: 2 ports detected
> [ 0.875430] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [ 0.875434] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
> [ 0.876662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.876727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.876804] usb usb2: Product: UHCI Host Controller
> [ 0.876864] usb usb2: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.876925] usb usb2: SerialNumber: 0000:00:1a.0
> [ 0.877660] hub 2-0:1.0: USB hub found
> [ 0.877727] hub 2-0:1.0: 2 ports detected
> [ 0.878118] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 0.878182] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 0.878290] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
> [ 0.878391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.878455] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.878538] usb usb4: Product: UHCI Host Controller
> [ 0.878598] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.878660] usb usb4: SerialNumber: 0000:00:1a.1
> [ 0.878827] hub 4-0:1.0: USB hub found
> [ 0.878894] hub 4-0:1.0: 2 ports detected
> [ 0.879054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
> [ 0.879120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.879154] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 0.879258] usb usb3: Product: xHCI Host Controller
> [ 0.879319] usb usb3: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
> [ 0.879382] usb usb3: SerialNumber: 0000:02:00.0
> [ 0.879539] hub 3-0:1.0: USB hub found
> [ 0.879608] hub 3-0:1.0: 2 ports detected
> [ 0.879857] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> [ 0.879968] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
> [ 0.880079] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.880144] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.880225] usb usb5: Product: UHCI Host Controller
> [ 0.880289] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.880355] usb usb5: SerialNumber: 0000:00:1a.2
> [ 0.880880] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 0.881011] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
> [ 0.881174] hub 5-0:1.0: USB hub found
> [ 0.881244] hub 5-0:1.0: 2 ports detected
> [ 0.881333] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003040000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
> [ 0.881418] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
> [ 0.881507] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 0.881576] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> [ 0.881686] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
> [ 0.881795] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.881862] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.881942] usb usb6: Product: UHCI Host Controller
> [ 0.882004] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.882068] usb usb6: SerialNumber: 0000:00:1d.0
> [ 0.882235] hub 6-0:1.0: USB hub found
> [ 0.882358] hub 6-0:1.0: 2 ports detected
> [ 0.882571] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 0.882639] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> [ 0.882738] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
> [ 0.882829] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.882892] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.882969] usb usb7: Product: UHCI Host Controller
> [ 0.883032] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.883096] usb usb7: SerialNumber: 0000:00:1d.1
> [ 0.883252] hub 7-0:1.0: USB hub found
> [ 0.883318] hub 7-0:1.0: 2 ports detected
> [ 0.883807] ehci-pci 0000:00:1a.7: EHCI Host Controller
> [ 0.883873] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
> [ 0.883963] ehci-pci 0000:00:1a.7: debug port 1
> [ 0.887915] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
> [ 0.887921] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
> [ 0.896701] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 0.896789] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.896852] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.896929] usb usb8: Product: EHCI Host Controller
> [ 0.896989] usb usb8: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
> [ 0.897050] usb usb8: SerialNumber: 0000:00:1a.7
> [ 0.897203] hub 8-0:1.0: USB hub found
> [ 0.897265] hub 8-0:1.0: 6 ports detected
> [ 0.920854] hub 2-0:1.0: USB hub found
> [ 0.920918] hub 2-0:1.0: 2 ports detected
> [ 0.944839] hub 4-0:1.0: USB hub found
> [ 0.944909] hub 4-0:1.0: 2 ports detected
> [ 0.952836] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
> [ 0.968937] hub 5-0:1.0: USB hub found
> [ 0.969000] hub 5-0:1.0: 2 ports detected
> [ 0.969339] ehci-pci 0000:00:1d.7: EHCI Host Controller
> [ 0.969403] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
> [ 0.969488] ehci-pci 0000:00:1d.7: debug port 1
> [ 0.973451] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
> [ 0.973459] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
> [ 0.984891] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 0.984994] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.985063] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.985139] usb usb9: Product: EHCI Host Controller
> [ 0.985198] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
> [ 0.985259] usb usb9: SerialNumber: 0000:00:1d.7
> [ 0.985559] hub 9-0:1.0: USB hub found
> [ 0.985626] hub 9-0:1.0: 6 ports detected
> [ 1.008858] hub 6-0:1.0: USB hub found
> [ 1.008928] hub 6-0:1.0: 2 ports detected
> [ 1.032916] hub 7-0:1.0: USB hub found
> [ 1.032981] hub 7-0:1.0: 2 ports detected
> [ 1.034350] ahci 0000:00:1f.2: version 3.0
> [ 1.034519] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
> [ 1.034584] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
> [ 1.034664] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
> [ 1.073365] scsi0 : ahci
> [ 1.074147] scsi1 : ahci
> [ 1.074398] scsi2 : ahci
> [ 1.074658] scsi3 : ahci
> [ 1.074884] scsi4 : ahci
> [ 1.075139] scsi5 : ahci
> [ 1.075258] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
> [ 1.075339] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
> [ 1.075416] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
> [ 1.075493] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
> [ 1.075570] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
> [ 1.075647] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
> [ 1.075798] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
> [ 1.075810] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
> [ 1.075881] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 1.075947] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
> [ 1.076046] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
> [ 1.076143] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.076207] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.076284] usb usb10: Product: UHCI Host Controller
> [ 1.076344] usb usb10: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 1.076405] usb usb10: SerialNumber: 0000:00:1d.2
> [ 1.076601] hub 10-0:1.0: USB hub found
> [ 1.076665] hub 10-0:1.0: 2 ports detected
> [ 1.092851] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
> [ 1.092936] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
> [ 1.093740] scsi6 : ahci
> [ 1.094057] scsi7 : ahci
> [ 1.094320] scsi8 : ahci
> [ 1.094581] scsi9 : ahci
> [ 1.094843] scsi10 : ahci
> [ 1.095133] scsi11 : ahci
> [ 1.095388] scsi12 : ahci
> [ 1.095623] scsi13 : ahci
> [ 1.095730] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
> [ 1.095810] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
> [ 1.095887] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
> [ 1.095964] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
> [ 1.096041] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
> [ 1.096118] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
> [ 1.096195] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
> [ 1.096272] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
> [ 1.096462] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
> [ 1.096541] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
> [ 1.096856] scsi14 : ahci
> [ 1.097115] scsi15 : ahci
> [ 1.097232] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
> [ 1.097313] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
> [ 1.412916] ata8: SATA link down (SStatus 0 SControl 300)
> [ 1.413001] ata9: SATA link down (SStatus 0 SControl 300)
> [ 1.416958] ata10: SATA link down (SStatus 0 SControl 300)
> [ 1.417039] ata12: SATA link down (SStatus 0 SControl 300)
> [ 1.417054] ata16: SATA link down (SStatus 0 SControl 300)
> [ 1.417176] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.417255] ata11: SATA link down (SStatus 0 SControl 300)
> [ 1.417362] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
> [ 1.417648] ata14.00: configured for UDMA/66
> [ 1.420870] ata13: SATA link down (SStatus 0 SControl 300)
> [ 1.420883] ata15: SATA link down (SStatus 0 SControl 300)
> [ 1.424964] ata7: SATA link down (SStatus 0 SControl 300)
> [ 1.454190] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
> [ 1.565063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.565144] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.565218] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.565291] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.565363] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.565434] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.566336] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.566410] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.566494] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.566556] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.566666] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.566728] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.566796] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.566859] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.566930] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
> [ 1.566992] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.567713] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
> [ 1.567790] ata2.00: applying bridge limits
> [ 1.568102] ata3.00: configured for UDMA/133
> [ 1.568269] ata6.00: configured for UDMA/133
> [ 1.570063] ata1.00: configured for UDMA/133
> [ 1.570211] ata4.00: configured for UDMA/133
> [ 1.570435] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.570584] ata5.00: configured for UDMA/133
> [ 1.572710] ata2.00: configured for UDMA/33
> [ 1.574865] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
> [ 1.575517] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.575957] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.576488] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
> [ 1.576820] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.577616] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
> [ 1.583764] scsi 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.583854] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 1.583938] scsi 2:0:0:0: Attached scsi generic sg2 type 0
> [ 1.584056] scsi 3:0:0:0: Attached scsi generic sg3 type 0
> [ 1.584162] scsi 4:0:0:0: Attached scsi generic sg4 type 0
> [ 1.584258] scsi 5:0:0:0: Attached scsi generic sg5 type 0
> [ 1.584356] scsi 13:0:0:0: Attached scsi generic sg6 type 3
> [ 1.584583] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.584738] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.584799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.584828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.588821] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 1.588909] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.589043] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 1.589170] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.589179] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.589208] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.589226] sd 3:0:0:0: [sdc] Write Protect is off
> [ 1.589227] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 1.589232] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.589270] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.589281] sd 4:0:0:0: [sdd] Write Protect is off
> [ 1.589283] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 1.589317] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.589328] sd 5:0:0:0: [sde] Write Protect is off
> [ 1.589330] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
> [ 1.589354] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.589973] sd 2:0:0:0: [sdb] Write Protect is off
> [ 1.590035] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.590062] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.594912] sda: sda1 sda2 sda3
> [ 1.595522] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.596944] sde: sde1 sde2 sde3
> [ 1.597674] sd 5:0:0:0: [sde] Attached SCSI disk
> [ 1.597871] sdc: sdc1 sdc2 sdc3
> [ 1.598533] sd 3:0:0:0: [sdc] Attached SCSI disk
> [ 1.598642] sdd: sdd1 sdd2 sdd3
> [ 1.599462] sd 4:0:0:0: [sdd] Attached SCSI disk
> [ 1.603289] sdb: sdb1 sdb2 sdb3
> [ 1.603968] sd 2:0:0:0: [sdb] Attached SCSI disk
> [ 1.728936] tsc: Refined TSC clocksource calibration: 2806.363 MHz
> [ 1.797109] usb 10-1: new low-speed USB device number 2 using uhci_hcd
> [ 1.862619] random: nonblocking pool is initialized
> [ 1.974452] usb 10-1: New USB device found, idVendor=046d, idProduct=c01e
> [ 1.974521] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 1.974602] usb 10-1: Product: USB-PS/2 Optical Mouse
> [ 1.974661] usb 10-1: Manufacturer: Logitech
> [ 1.980969] hidraw: raw HID events driver (C) Jiri Kosina
> [ 1.997580] usbcore: registered new interface driver usbhid
> [ 1.997644] usbhid: USB HID core driver
> [ 2.001421] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input1
> [ 2.001597] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
> [ 2.054534] md: md127 stopped.
> [ 2.057251] md: bind<sdc3>
> [ 2.057496] md: bind<sdb3>
> [ 2.057900] md: bind<sdd3>
> [ 2.058172] md: bind<sde3>
> [ 2.069225] md: bind<sda3>
> [ 2.070712] md: raid10 personality registered for level 10
> [ 2.071529] md/raid10:md127: active with 4 out of 4 devices
> [ 2.071736] created bitmap (466 pages) for device md127
> [ 2.112065] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
> [ 2.139112] md127: detected capacity change from 0 to 1999877701632
> [ 2.139234] RAID10 conf printout:
> [ 2.139235] --- wd:4 rd:4
> [ 2.139237] disk 0, wo:0, o:1, dev:sda3
> [ 2.139238] disk 1, wo:0, o:1, dev:sdc3
> [ 2.139240] disk 2, wo:0, o:1, dev:sdb3
> [ 2.139241] disk 3, wo:0, o:1, dev:sdd3
> [ 2.140652] md127: unknown partition table
> [ 2.175795] device-mapper: uevent: version 1.0.3
> [ 2.175915] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> [ 2.217251] usb 10-2: new low-speed USB device number 3 using uhci_hcd
> [ 2.310294] bio: create slab <bio-1> at 1
> [ 2.375244] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
> [ 2.522645] usb 10-2: New USB device found, idVendor=051d, idProduct=0002
> [ 2.522714] usb 10-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
> [ 2.522794] usb 10-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
> [ 2.522856] usb 10-2: Manufacturer: American Power Conversion
> [ 2.522916] usb 10-2: SerialNumber: JB0539032829
> [ 2.731242] Switched to clocksource tsc
> [ 3.593537] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
> [ 13.839354] systemd-udevd[625]: starting version 204
> [ 14.427591] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
> [ 14.427673] ACPI: Power Button [PWRB]
> [ 14.427763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 14.427840] ACPI: Power Button [PWRF]
> [ 14.439625] ATK0110 ATK0110:00: Overriding interface detection
> [ 14.460048] wmi: Mapper loaded
> [ 14.464721] EDAC MC: Ver: 3.0.0
> [ 14.477876] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
> [ 14.478006] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
> [ 14.478097] EDAC i7core: Driver loaded, 1 memory controller(s) found.
> [ 14.489458] systemd-udevd[686]: renamed network interface eth0 to lan
> [ 14.501227] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
> [ 14.501388] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.501470] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
> [ 14.501627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.501707] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
> [ 14.501864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.501944] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 14.511300] [drm] Initialized drm 1.1.0 20060810
> [ 14.536083] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
> [ 14.536244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.555738] input: PC Speaker as /devices/platform/pcspkr/input/input4
> [ 14.635305] iTCO_vendor_support: vendor-support=0
> [ 14.680094] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> [ 14.680175] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
> [ 14.680314] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
> [ 14.705616] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
> [ 14.871767] nouveau: unknown parameter 'perflvl_wr' ignored
> [ 14.871980] MXM: GUID detected in BIOS
> [ 14.872267] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
> [ 14.872329] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
> [ 14.872390] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
> [ 14.873338] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
> [ 14.892345] md: bind<sde1>
> [ 14.938280] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
> [ 14.938344] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
> [ 14.938506] nouveau [ VBIOS][0000:03:00.0] BIT signature found
> [ 14.938568] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
> [ 14.938844] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
> [ 14.938852] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
> [ 14.938940] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061d590000] reclocking of this ram type unsupported
> [ 14.939052] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
> [ 14.939139] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
> [ 14.939227] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
> [ 14.943231] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
> [ 14.947573] md: bind<sdc1>
> [ 14.970337] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
> [ 14.970435] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
> [ 14.970527] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
> [ 14.970641] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
> [ 14.970733] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
> [ 14.970840] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
> [ 14.971088] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
> [ 14.979269] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
> [ 14.979359] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
> [ 14.979448] [TTM] Initializing pool allocator
> [ 14.979535] [TTM] Initializing DMA pool allocator
> [ 14.979626] nouveau [ DRM] VRAM: 512 MiB
> [ 14.979712] nouveau [ DRM] GART: 1048576 MiB
> [ 14.979799] nouveau [ DRM] TMDS table version 2.0
> [ 14.979887] nouveau [ DRM] DCB version 4.0
> [ 14.979973] nouveau [ DRM] DCB outp 00: 01000302 00020030
> [ 14.980061] nouveau [ DRM] DCB outp 01: 02000300 00000000
> [ 14.980149] nouveau [ DRM] DCB outp 02: 08011392 00020020
> [ 14.980237] nouveau [ DRM] DCB outp 03: 04022310 00000000
> [ 14.980325] nouveau [ DRM] DCB conn 00: 00001030
> [ 14.980474] nouveau [ DRM] DCB conn 01: 00002161
> [ 14.980623] nouveau [ DRM] DCB conn 02: 00000200
> [ 14.981610] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 14.981700] [drm] No driver support for vblank timestamp query.
> [ 14.996303] nouveau [ DRM] MM: using COPY0 for buffer copies
> [ 15.005413] md: bind<sdd1>
> [ 15.008206] md: bind<sdb1>
> [ 15.043483] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 15.043641] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 15.043787] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 15.043937] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 15.044083] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> [ 15.044227] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> [ 15.044372] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
> [ 15.044514] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
> [ 15.090263] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061fbc5c00
> [ 15.090414] fbcon: nouveaufb (fb0) is primary device
> [ 15.096053] md: bind<sda1>
> [ 15.142331] md: raid1 personality registered for level 1
> [ 15.142630] md/raid1:md0: active with 5 out of 5 mirrors
> [ 15.142756] created bitmap (16 pages) for device md0
> [ 15.143289] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
> [ 15.158765] md0: detected capacity change from 0 to 131465216
> [ 15.158830] RAID1 conf printout:
> [ 15.158831] --- wd:5 rd:5
> [ 15.158832] disk 0, wo:0, o:1, dev:sda1
> [ 15.158834] disk 1, wo:0, o:1, dev:sdc1
> [ 15.158835] disk 2, wo:0, o:1, dev:sdb1
> [ 15.158836] disk 3, wo:0, o:1, dev:sdd1
> [ 15.158838] disk 4, wo:0, o:1, dev:sde1
> [ 15.161088] md0: unknown partition table
> [ 15.169957] Console: switching to colour frame buffer device 128x48
> [ 15.171037] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
> [ 15.171049] nouveau 0000:03:00.0: registered panic notifier
> [ 15.171065] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
> [ 15.171158] hda_intel: Disabling MSI
> [ 15.171178] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
> [ 15.985619] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
> [ 15.985855] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
> [ 15.986079] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
> [ 15.986309] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
> [ 16.618195] EXT4-fs (dm-0): re-mounted. Opts: (null)
> [ 16.967621] RAID10 conf printout:
> [ 16.967627] --- wd:4 rd:4
> [ 16.967631] disk 0, wo:0, o:1, dev:sda3
> [ 16.967634] disk 1, wo:0, o:1, dev:sdc3
> [ 16.967637] disk 2, wo:0, o:1, dev:sdb3
> [ 16.967640] disk 3, wo:0, o:1, dev:sdd3
> [ 17.082706] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
> [ 17.492574] loop: module loaded
> [ 18.896517] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
> [ 20.012569] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
> [ 20.059635] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
> [ 20.128415] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
> [ 20.135680] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
> [ 20.244279] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 20.333238] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 20.388560] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 20.444331] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 21.412118] Bridge firewalling registered
> [ 21.415269] device lan entered promiscuous mode
> [ 21.427959] r8169 0000:07:01.0 lan: link down
> [ 21.427971] r8169 0000:07:01.0 lan: link down
> [ 21.428481] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
> [ 21.430800] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
> [ 24.341372] r8169 0000:07:01.0 lan: link up
> [ 24.341629] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
> [ 24.342533] br0: port 1(lan) entered forwarding state
> [ 24.343999] br0: port 1(lan) entered forwarding state
> [ 24.345446] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
> [ 25.473310] RPC: Registered named UNIX socket transport module.
> [ 25.473448] RPC: Registered udp transport module.
> [ 25.473595] RPC: Registered tcp transport module.
> [ 25.474057] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 25.489622] FS-Cache: Loaded
> [ 25.517937] FS-Cache: Netfs 'nfs' registered for caching
> [ 25.565226] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
> [ 26.137517] tun: Universal TUN/TAP device driver, 1.6
> [ 26.137660] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
> [ 26.344703] br0: port 1(lan) entered forwarding state
> [ 37.114777] CacheFiles: Loaded
> [ 38.078498] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 38.085722] NFSD: starting 90-second grace period (net ffffffff81885e00)
> [ 38.947421] lp: driver loaded but no devices found
> [ 38.968982] ppdev: user-space parallel port driver
> [ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #5 SMP Mon Jan 13 16:59:58 EST 2014
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.5 present.
> [ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-DFFFF write-protect
> [ 0.000000] E0000-EBFFF write-through
> [ 0.000000] EC000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask C00000000 write-back
> [ 0.000000] 1 base 400000000 mask E00000000 write-back
> [ 0.000000] 2 base 600000000 mask FC0000000 write-back
> [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
> [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
> [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
> [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
> [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
> [ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
> [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
> [ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
> [ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
> [ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
> [ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
> [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
> [ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
> [ 0.000000] RAMDISK: [mem 0x362b4000-0x37151fff]
> [ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
> [ 0.000000] ACPI: XSDT 00000000bf780100 00006C (v01 080912 XSDT1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
> [ 0.000000] ACPI: FACS 00000000bf798000 000040
> [ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
> [ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
> [ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
> [ 0.000000] ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
> [ 0.000000] ACPI: ASPT 00000000bf7984b0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
> [ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
> [ 0.000000] ACPI: SSDT 00000000bf79a970 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
> [ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
> [ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x63fffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> [ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
> [ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
> [ 0.000000] On node 0 totalpages: 6289181
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 10667 pages used for memmap
> [ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
> [ 0.000000] Normal zone: 75264 pages used for memmap
> [ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
> [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 64
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
> [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
> [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.000000] Memory: 24718520K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438204K reserved)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
> [ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 100663296 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration failed
> [ 0.016000] tsc: Unable to calibrate against PIT
> [ 0.016000] tsc: using HPET reference calibration
> [ 0.016000] tsc: Detected 2806.296 MHz processor
> [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.59 BogoMIPS (lpj=11225184)
> [ 0.000125] pid_max: default: 32768 minimum: 301
> [ 0.000218] Security Framework initialized
> [ 0.000279] AppArmor: AppArmor disabled by boot time parameter
> [ 0.000340] Yama: becoming mindful.
> [ 0.002290] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
> [ 0.008543] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> [ 0.013895] Mount-cache hash table entries: 256
> [ 0.014116] Initializing cgroup subsys memory
> [ 0.014179] Initializing cgroup subsys devices
> [ 0.014239] Initializing cgroup subsys freezer
> [ 0.014299] Initializing cgroup subsys blkio
> [ 0.014358] Initializing cgroup subsys perf_event
> [ 0.014435] CPU: Physical Processor ID: 0
> [ 0.014494] CPU: Processor Core ID: 0
> [ 0.014555] mce: CPU supports 9 MCE banks
> [ 0.014623] CPU0: Thermal monitoring enabled (TM1)
> [ 0.014692] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
> [ 0.014692] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
> [ 0.014692] tlb_flushall_shift: 6
> [ 0.014858] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
> [ 0.015945] ACPI: Core revision 20131115
> [ 0.019435] ACPI: All ACPI Tables successfully acquired
> [ 0.063692] dmar: Host address width 39
> [ 0.063753] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
> [ 0.063820] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
> [ 0.063900] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
> [ 0.063965] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
> [ 0.064045] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
> [ 0.064108] dmar: RMRR base: 0x000000bf7ea000 end: 0x000000bf7fffff
> [ 0.064171] dmar: ATSR flags: 0x0
> [ 0.064324] This system BIOS has enabled interrupt remapping
> [ 0.064324] on a chipset that contains an erratum making that
> [ 0.064324] feature unstable. To maintain system stability
> [ 0.064324] interrupt remapping is being disabled. Please
> [ 0.064324] contact your BIOS vendor for an update
> [ 0.064324] Ignoring and leaving enabled anyway!
> [ 0.064500] IOAPIC id 8 under DRHD base 0xfbffe000 IOMMU 1
> [ 0.064562] IOAPIC id 9 under DRHD base 0xfbffe000 IOMMU 1
> [ 0.064800] Enabled IRQ remapping in xapic mode
> [ 0.064862] Switched APIC routing to physical flat.
> [ 0.065480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.105236] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
> [ 0.213081] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
> [ 0.213315] perf_event_intel: CPU erratum AAJ80 worked around
> [ 0.213377] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
> [ 0.213442] ... version: 3
> [ 0.213501] ... bit width: 48
> [ 0.213559] ... generic registers: 4
> [ 0.213618] ... value mask: 0000ffffffffffff
> [ 0.213678] ... max period: 000000007fffffff
> [ 0.213739] ... fixed-purpose events: 3
> [ 0.213797] ... event mask: 000000070000000f
> [ 0.214203] x86: Booting SMP configuration:
> [ 0.228684] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.230877] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.246258] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.262803] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
> [ 0.214264] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
> [ 0.323264] x86: Booted up 1 node, 8 CPUs
> [ 0.323376] smpboot: Total of 8 processors activated (44900.73 BogoMIPS)
> [ 0.329758] devtmpfs: initialized
> [ 0.333261] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
> [ 0.333489] NET: Registered protocol family 16
> [ 0.333619] cpuidle: using governor ladder
> [ 0.333678] cpuidle: using governor menu
> [ 0.333758] ACPI: bus type PCI registered
> [ 0.333816] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.333946] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.334028] PCI: not using MMCONFIG
> [ 0.334086] PCI: Using configuration type 1 for base access
> [ 0.334869] bio: create slab <bio-0> at 0
> [ 0.335037] ACPI: Added _OSI(Module Device)
> [ 0.335097] ACPI: Added _OSI(Processor Device)
> [ 0.335155] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.335215] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.336890] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.369156] ACPI: SSDT 00000000bf7984f0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
> [ 0.369601] ACPI: Dynamic OEM Table Load:
> [ 0.369733] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
> [ 0.369960] ACPI: SSDT 00000000bf79a310 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
> [ 0.370313] ACPI: Dynamic OEM Table Load:
> [ 0.370446] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
> [ 0.370768] ACPI: Interpreter enabled
> [ 0.370833] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
> [ 0.370997] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.371056] ACPI: Using IOAPIC for interrupt routing
> [ 0.371133] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.372067] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> [ 0.386010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.386201] ACPI: No dock devices found.
> [ 0.394051] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.394118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 0.394201] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> [ 0.394556] PCI host bridge to bus 0000:00
> [ 0.394616] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.394678] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.394740] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.394802] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.394866] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
> [ 0.394930] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
> [ 0.394993] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
> [ 0.395065] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
> [ 0.395108] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> [ 0.395176] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
> [ 0.395220] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.395265] pci 0000:00:01.0: System wakeup disabled by ACPI
> [ 0.395352] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
> [ 0.395396] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> [ 0.395440] pci 0000:00:02.0: System wakeup disabled by ACPI
> [ 0.395526] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
> [ 0.395570] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 0.395614] pci 0000:00:03.0: System wakeup disabled by ACPI
> [ 0.395704] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
> [ 0.395744] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 0.395788] pci 0000:00:07.0: System wakeup disabled by ACPI
> [ 0.395879] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
> [ 0.395969] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
> [ 0.396058] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
> [ 0.396144] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
> [ 0.396230] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
> [ 0.396267] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
> [ 0.396349] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.396436] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
> [ 0.396475] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
> [ 0.396559] pci 0000:00:1a.1: System wakeup disabled by ACPI
> [ 0.396646] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
> [ 0.396682] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
> [ 0.396763] pci 0000:00:1a.2: System wakeup disabled by ACPI
> [ 0.396857] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
> [ 0.396876] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
> [ 0.396954] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.397001] pci 0000:00:1a.7: System wakeup disabled by ACPI
> [ 0.397090] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
> [ 0.397103] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
> [ 0.397163] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.397231] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
> [ 0.397289] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.397336] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.397425] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
> [ 0.397483] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.397529] pci 0000:00:1c.4: System wakeup disabled by ACPI
> [ 0.397618] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
> [ 0.397654] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
> [ 0.397736] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.397824] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
> [ 0.397860] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
> [ 0.397941] pci 0000:00:1d.1: System wakeup disabled by ACPI
> [ 0.398028] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
> [ 0.398065] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
> [ 0.398146] pci 0000:00:1d.2: System wakeup disabled by ACPI
> [ 0.398240] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
> [ 0.398259] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
> [ 0.398337] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.398384] pci 0000:00:1d.7: System wakeup disabled by ACPI
> [ 0.398469] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> [ 0.398548] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 0.398636] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
> [ 0.398704] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
> [ 0.398796] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
> [ 0.398861] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
> [ 0.399031] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
> [ 0.399047] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
> [ 0.399054] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
> [ 0.399060] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
> [ 0.399067] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
> [ 0.399073] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
> [ 0.399080] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
> [ 0.399119] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.399185] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
> [ 0.399198] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
> [ 0.399216] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
> [ 0.399325] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
> [ 0.399334] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
> [ 0.399340] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
> [ 0.399347] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
> [ 0.399353] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
> [ 0.399359] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
> [ 0.399366] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
> [ 0.399373] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
> [ 0.399400] pci 0000:01:00.0: PME# supported from D3hot
> [ 0.405140] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.405207] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
> [ 0.405209] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
> [ 0.405259] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
> [ 0.405274] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
> [ 0.405345] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 0.413158] pci 0000:00:02.0: PCI bridge to [bus 02]
> [ 0.413229] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
> [ 0.413290] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
> [ 0.413299] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
> [ 0.413308] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
> [ 0.413317] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
> [ 0.413323] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
> [ 0.413330] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
> [ 0.413400] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
> [ 0.413409] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
> [ 0.421156] pci 0000:00:03.0: PCI bridge to [bus 03]
> [ 0.421222] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
> [ 0.421228] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
> [ 0.421232] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 0.421267] pci 0000:00:07.0: PCI bridge to [bus 04]
> [ 0.421372] pci 0000:00:1c.0: PCI bridge to [bus 06]
> [ 0.421439] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.421518] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
> [ 0.421545] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
> [ 0.421558] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
> [ 0.421570] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
> [ 0.421583] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
> [ 0.421595] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
> [ 0.421608] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
> [ 0.421621] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
> [ 0.421669] pci 0000:05:00.0: PME# supported from D3hot
> [ 0.429177] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [ 0.429247] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.429250] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
> [ 0.429303] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
> [ 0.429321] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
> [ 0.429329] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
> [ 0.429364] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
> [ 0.429397] pci 0000:07:01.0: supports D1 D2
> [ 0.429399] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.429440] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
> [ 0.429455] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
> [ 0.429464] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
> [ 0.429525] pci 0000:07:02.0: supports D2
> [ 0.429527] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
> [ 0.429583] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
> [ 0.429648] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> [ 0.429651] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> [ 0.429656] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 0.429657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 0.429659] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.429661] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
> [ 0.429662] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
> [ 0.429664] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
> [ 0.430102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
> [ 0.430611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.431120] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
> [ 0.431628] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
> [ 0.432135] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
> [ 0.432644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
> [ 0.433152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
> [ 0.433663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.434208] ACPI: Enabled 3 GPEs in block 00 to 3F
> [ 0.434347] ACPI: \_SB_.PCI0: notify handler is installed
> [ 0.434378] Found 1 acpi root devices
> [ 0.434448] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.434527] vgaarb: loaded
> [ 0.434583] vgaarb: bridge control possible 0000:03:00.0
> [ 0.434673] PCI: Using ACPI for IRQ routing
> [ 0.441771] PCI: Discovered peer bus ff
> [ 0.441832] PCI: root bus ff: using default resources
> [ 0.441833] PCI: Probing PCI hardware (bus ff)
> [ 0.441861] PCI host bridge to bus 0000:ff
> [ 0.441921] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
> [ 0.441983] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
> [ 0.442047] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
> [ 0.442130] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
> [ 0.442166] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
> [ 0.442196] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
> [ 0.442224] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
> [ 0.442254] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
> [ 0.442282] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
> [ 0.442310] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
> [ 0.442339] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
> [ 0.442368] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
> [ 0.442396] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
> [ 0.442424] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
> [ 0.442453] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
> [ 0.442481] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
> [ 0.442514] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
> [ 0.442541] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
> [ 0.442570] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
> [ 0.442598] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
> [ 0.442625] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
> [ 0.442653] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
> [ 0.442689] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
> [ 0.442693] PCI: pci_cache_line_size set to 64 bytes
> [ 0.442765] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
> [ 0.442767] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
> [ 0.442855] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> [ 0.442921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 0.443167] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> [ 0.447119] Switched to clocksource hpet
> [ 0.448454] pnp: PnP ACPI init
> [ 0.448523] ACPI: bus type PNP registered
> [ 0.448633] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
> [ 0.448698] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
> [ 0.448761] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
> [ 0.448824] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
> [ 0.448888] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
> [ 0.448951] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
> [ 0.449015] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.449053] pnp 00:01: [dma 4]
> [ 0.449067] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.449095] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.449111] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.449134] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.449219] system 00:05: [io 0x0290-0x029f] has been reserved
> [ 0.449282] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.449459] system 00:06: [io 0x04d0-0x04d1] has been reserved
> [ 0.449522] system 00:06: [io 0x0800-0x087f] could not be reserved
> [ 0.449585] system 00:06: [io 0x0500-0x057f] could not be reserved
> [ 0.449648] system 00:06: [io 0x0600-0x0607] has been reserved
> [ 0.449710] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.449773] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 0.449837] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
> [ 0.449900] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.449965] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 0.450013] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
> [ 0.450065] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
> [ 0.450130] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.450210] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.450275] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.450338] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.450493] pnp 00:0b: [dma 0 disabled]
> [ 0.450540] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.450582] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> [ 0.450642] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.450706] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.450857] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.450922] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
> [ 0.450986] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
> [ 0.451050] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
> [ 0.451114] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
> [ 0.451183] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.451281] pnp: PnP ACPI: found 15 devices
> [ 0.451340] ACPI: bus type PNP unregistered
> [ 0.458308] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
> [ 0.458312] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
> [ 0.458320] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
> [ 0.458334] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
> [ 0.458400] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
> [ 0.458402] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
> [ 0.458404] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> [ 0.458407] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
> [ 0.458471] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
> [ 0.458550] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
> [ 0.458613] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.458674] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
> [ 0.458738] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
> [ 0.458805] pci 0000:00:02.0: PCI bridge to [bus 02]
> [ 0.458866] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
> [ 0.458933] pci 0000:00:03.0: PCI bridge to [bus 03]
> [ 0.458994] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
> [ 0.459058] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
> [ 0.459131] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 0.459213] pci 0000:00:07.0: PCI bridge to [bus 04]
> [ 0.459278] pci 0000:00:1c.0: PCI bridge to [bus 06]
> [ 0.459339] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
> [ 0.459403] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
> [ 0.459468] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.459550] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
> [ 0.459628] pci 0000:00:1c.4: PCI bridge to [bus 05]
> [ 0.459689] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.459753] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
> [ 0.459818] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
> [ 0.459899] pci 0000:00:1e.0: PCI bridge to [bus 07]
> [ 0.459960] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
> [ 0.460024] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
> [ 0.460092] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.460094] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.460095] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.460096] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.460098] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
> [ 0.460099] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
> [ 0.460101] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
> [ 0.460103] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
> [ 0.460104] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
> [ 0.460106] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
> [ 0.460107] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
> [ 0.460109] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
> [ 0.460110] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
> [ 0.460112] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
> [ 0.460113] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.460115] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> [ 0.460117] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
> [ 0.460118] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
> [ 0.460120] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
> [ 0.460121] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
> [ 0.460123] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
> [ 0.460124] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
> [ 0.460126] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.460127] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.460128] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
> [ 0.460130] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
> [ 0.460133] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
> [ 0.460135] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
> [ 0.460213] NET: Registered protocol family 2
> [ 0.460539] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.461056] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.461230] TCP: Hash tables configured (established 262144 bind 65536)
> [ 0.461307] TCP: reno registered
> [ 0.461389] UDP hash table entries: 16384 (order: 7, 524288 bytes)
> [ 0.461556] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
> [ 0.461774] NET: Registered protocol family 1
> [ 0.464540] pci 0000:03:00.0: Boot video device
> [ 0.464554] PCI: CLS mismatch (256 != 64), using 64 bytes
> [ 0.464603] Unpacking initramfs...
> [ 0.736646] Freeing initrd memory: 14968K (ffff8800362b4000 - ffff880037152000)
> [ 0.736750] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.736813] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
> [ 0.737121] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737187] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737253] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737319] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737384] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737450] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737515] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737581] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
> [ 0.737678] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
> [ 0.738041] audit: initializing netlink socket (disabled)
> [ 0.738109] type=2000 audit(1389652889.600:1): initialized
> [ 0.752758] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.753588] VFS: Disk quotas dquot_6.5.2
> [ 0.753674] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.753805] msgmni has been set to 32768
> [ 0.754077] alg: No test for stdrng (krng)
> [ 0.754157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 0.754270] io scheduler noop registered
> [ 0.754328] io scheduler deadline registered
> [ 0.754407] io scheduler cfq registered (default)
> [ 0.754636] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
> [ 0.754824] pcieport 0000:00:1c.0: irq 66 for MSI/MSI-X
> [ 0.756806] pcieport 0000:00:1c.4: irq 67 for MSI/MSI-X
> [ 0.756885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.756957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.757040] intel_idle: MWAIT substates: 0x1120
> [ 0.757051] intel_idle: v0.4 model 0x1A
> [ 0.757051] intel_idle: lapic_timer_reliable_states 0x2
> [ 0.757218] GHES: HEST is not enabled!
> [ 0.757327] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.779389] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [ 0.779781] Linux agpgart interface v0.103
> [ 0.779936] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 0.779999] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [ 0.780559] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.780691] mousedev: PS/2 mouse device common for all mice
> [ 0.780782] rtc_cmos 00:02: RTC can wake from S4
> [ 0.780943] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 0.781026] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 0.781111] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
> [ 0.781174] AMD IOMMUv2 functionality not available on this system
> [ 0.781307] TCP: cubic registered
> [ 0.781544] NET: Registered protocol family 10
> [ 0.781778] mip6: Mobile IPv6
> [ 0.781835] NET: Registered protocol family 17
> [ 0.781895] mpls_gso: MPLS GSO support
> [ 0.782179] registered taskstats version 1
> [ 0.783153] rtc_cmos 00:02: setting system clock to 2014-01-13 22:41:30 UTC (1389652890)
> [ 0.783258] PM: Hibernation image not present or could not be loaded.
> [ 0.783874] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
> [ 0.783953] Write protecting the kernel read-only data: 8192k
> [ 0.787091] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
> [ 0.789984] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
> [ 0.803476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [ 0.849769] systemd-udevd[95]: starting version 204
> [ 0.865521] SCSI subsystem initialized
> [ 0.868249] ACPI: bus type USB registered
> [ 0.868332] usbcore: registered new interface driver usbfs
> [ 0.868407] usbcore: registered new interface driver hub
> [ 0.868501] usbcore: registered new device driver usb
> [ 0.868960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.869285] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.869367] ehci-pci: EHCI PCI platform driver
> [ 0.869516] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 0.869586] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
> [ 0.869705] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
> [ 0.869815] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.869881] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.869963] usb usb1: Product: UHCI Host Controller
> [ 0.870025] usb usb1: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.870090] usb usb1: SerialNumber: 0000:00:1a.0
> [ 0.870269] hub 1-0:1.0: USB hub found
> [ 0.870338] hub 1-0:1.0: 2 ports detected
> [ 0.870451] libata version 3.00 loaded.
> [ 0.870478] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [ 0.870553] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
> [ 0.870627] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 0.870632] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
> [ 0.870669] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
> [ 0.870720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.870721] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.870723] usb usb3: Product: UHCI Host Controller
> [ 0.870724] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.870725] usb usb3: SerialNumber: 0000:00:1a.1
> [ 0.870818] hub 3-0:1.0: USB hub found
> [ 0.870823] hub 3-0:1.0: 2 ports detected
> [ 0.871021] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 0.871027] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
> [ 0.872850] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
> [ 0.872906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.872907] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.872909] usb usb4: Product: UHCI Host Controller
> [ 0.872910] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.872911] usb usb4: SerialNumber: 0000:00:1a.2
> [ 0.873086] hub 4-0:1.0: USB hub found
> [ 0.873092] hub 4-0:1.0: 2 ports detected
> [ 0.873310] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 0.873314] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> [ 0.873348] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
> [ 0.873449] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.873451] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.873452] usb usb5: Product: UHCI Host Controller
> [ 0.873454] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.873455] usb usb5: SerialNumber: 0000:00:1d.0
> [ 0.873540] hub 5-0:1.0: USB hub found
> [ 0.873547] hub 5-0:1.0: 2 ports detected
> [ 0.873741] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 0.873746] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> [ 0.873770] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
> [ 0.873815] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.873817] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.873818] usb usb6: Product: UHCI Host Controller
> [ 0.873819] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 0.873821] usb usb6: SerialNumber: 0000:00:1d.1
> [ 0.873909] hub 6-0:1.0: USB hub found
> [ 0.873916] hub 6-0:1.0: 2 ports detected
> [ 0.875118] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
> [ 0.875128] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
> [ 0.875136] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
> [ 0.875144] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
> [ 0.875152] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
> [ 0.875160] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
> [ 0.875168] xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
> [ 0.875176] xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
> [ 0.875952] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.876018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.876096] usb usb2: Product: xHCI Host Controller
> [ 0.876157] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
> [ 0.876218] usb usb2: SerialNumber: 0000:02:00.0
> [ 0.876407] hub 2-0:1.0: USB hub found
> [ 0.876477] hub 2-0:1.0: 2 ports detected
> [ 0.876608] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [ 0.876672] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7
> [ 0.876780] ehci-pci 0000:00:1a.7: EHCI Host Controller
> [ 0.876844] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
> [ 0.876932] ehci-pci 0000:00:1a.7: debug port 1
> [ 0.878310] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 0.878439] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
> [ 0.878567] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
> [ 0.878640] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.878721] usb usb7: Product: xHCI Host Controller
> [ 0.878757] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003074000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
> [ 0.878759] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
> [ 0.878953] usb usb7: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
> [ 0.879019] usb usb7: SerialNumber: 0000:02:00.0
> [ 0.879209] hub 7-0:1.0: USB hub found
> [ 0.879296] hub 7-0:1.0: 2 ports detected
> [ 0.880886] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
> [ 0.880897] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
> [ 0.891320] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 0.891422] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.891489] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.891571] usb usb8: Product: EHCI Host Controller
> [ 0.891634] usb usb8: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
> [ 0.891699] usb usb8: SerialNumber: 0000:00:1a.7
> [ 0.891873] hub 8-0:1.0: USB hub found
> [ 0.891943] hub 8-0:1.0: 6 ports detected
> [ 0.915485] hub 1-0:1.0: USB hub found
> [ 0.915550] hub 1-0:1.0: 2 ports detected
> [ 0.939414] hub 3-0:1.0: USB hub found
> [ 0.939480] hub 3-0:1.0: 2 ports detected
> [ 0.951476] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
> [ 0.963469] hub 4-0:1.0: USB hub found
> [ 0.963538] hub 4-0:1.0: 2 ports detected
> [ 0.963877] ehci-pci 0000:00:1d.7: EHCI Host Controller
> [ 0.963942] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
> [ 0.964030] ehci-pci 0000:00:1d.7: debug port 1
> [ 0.967976] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
> [ 0.967982] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
> [ 0.979507] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 0.979599] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.979674] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.979752] usb usb9: Product: EHCI Host Controller
> [ 0.979812] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
> [ 0.979874] usb usb9: SerialNumber: 0000:00:1d.7
> [ 0.980177] hub 9-0:1.0: USB hub found
> [ 0.980245] hub 9-0:1.0: 6 ports detected
> [ 1.003473] hub 5-0:1.0: USB hub found
> [ 1.003544] hub 5-0:1.0: 2 ports detected
> [ 1.027516] hub 6-0:1.0: USB hub found
> [ 1.027582] hub 6-0:1.0: 2 ports detected
> [ 1.027914] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 1.027982] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
> [ 1.028084] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
> [ 1.028179] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.028243] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.028321] usb usb10: Product: UHCI Host Controller
> [ 1.028382] usb usb10: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
> [ 1.028444] usb usb10: SerialNumber: 0000:00:1d.2
> [ 1.028589] hub 10-0:1.0: USB hub found
> [ 1.028653] hub 10-0:1.0: 2 ports detected
> [ 1.028852] ahci 0000:00:1f.2: version 3.0
> [ 1.029062] ahci 0000:00:1f.2: irq 76 for MSI/MSI-X
> [ 1.029067] ahci 0000:00:1f.2: irq 77 for MSI/MSI-X
> [ 1.029071] ahci 0000:00:1f.2: irq 78 for MSI/MSI-X
> [ 1.029075] ahci 0000:00:1f.2: irq 79 for MSI/MSI-X
> [ 1.029079] ahci 0000:00:1f.2: irq 80 for MSI/MSI-X
> [ 1.029083] ahci 0000:00:1f.2: irq 81 for MSI/MSI-X
> [ 1.029087] ahci 0000:00:1f.2: irq 82 for MSI/MSI-X
> [ 1.029091] ahci 0000:00:1f.2: irq 83 for MSI/MSI-X
> [ 1.029095] ahci 0000:00:1f.2: irq 84 for MSI/MSI-X
> [ 1.029099] ahci 0000:00:1f.2: irq 85 for MSI/MSI-X
> [ 1.029102] ahci 0000:00:1f.2: irq 86 for MSI/MSI-X
> [ 1.029106] ahci 0000:00:1f.2: irq 87 for MSI/MSI-X
> [ 1.029110] ahci 0000:00:1f.2: irq 88 for MSI/MSI-X
> [ 1.029114] ahci 0000:00:1f.2: irq 89 for MSI/MSI-X
> [ 1.029118] ahci 0000:00:1f.2: irq 90 for MSI/MSI-X
> [ 1.029122] ahci 0000:00:1f.2: irq 91 for MSI/MSI-X
> [ 1.029191] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
> [ 1.029275] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
> [ 1.069168] scsi0 : ahci
> [ 1.069556] scsi1 : ahci
> [ 1.069809] scsi2 : ahci
> [ 1.070035] scsi3 : ahci
> [ 1.072090] scsi4 : ahci
> [ 1.072341] scsi5 : ahci
> [ 1.072462] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 76
> [ 1.072546] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 77
> [ 1.072625] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 78
> [ 1.072703] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 79
> [ 1.072782] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 80
> [ 1.072860] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 81
> [ 1.073026] ahci 0000:01:00.0: irq 92 for MSI/MSI-X
> [ 1.073037] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
> [ 1.088425] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
> [ 1.088508] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
> [ 1.089261] scsi6 : ahci
> [ 1.089470] scsi7 : ahci
> [ 1.089677] scsi8 : ahci
> [ 1.089884] scsi9 : ahci
> [ 1.090106] scsi10 : ahci
> [ 1.090324] scsi11 : ahci
> [ 1.090500] scsi12 : ahci
> [ 1.090668] scsi13 : ahci
> [ 1.090779] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 92
> [ 1.090863] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 92
> [ 1.090941] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 92
> [ 1.091020] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 92
> [ 1.091099] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 92
> [ 1.091177] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 92
> [ 1.091256] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 92
> [ 1.091341] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 92
> [ 1.091536] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
> [ 1.091618] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
> [ 1.091929] scsi14 : ahci
> [ 1.092064] scsi15 : ahci
> [ 1.092157] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
> [ 1.092238] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
> [ 1.411641] ata8: SATA link down (SStatus 0 SControl 300)
> [ 1.411660] ata15: SATA link down (SStatus 0 SControl 300)
> [ 1.411697] ata16: SATA link down (SStatus 0 SControl 300)
> [ 1.411849] ata12: SATA link down (SStatus 0 SControl 300)
> [ 1.411925] ata10: SATA link down (SStatus 0 SControl 300)
> [ 1.412002] ata11: SATA link down (SStatus 0 SControl 300)
> [ 1.412077] ata9: SATA link down (SStatus 0 SControl 300)
> [ 1.412153] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.412230] ata13: SATA link down (SStatus 0 SControl 300)
> [ 1.412303] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
> [ 1.412589] ata14.00: configured for UDMA/66
> [ 1.420153] ata7: SATA link down (SStatus 0 SControl 300)
> [ 1.453411] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
> [ 1.563698] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.563781] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.563855] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.563929] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.564002] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.565155] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.565223] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.565341] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.565405] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.565515] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.565579] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.565737] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
> [ 1.565840] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.566642] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
> [ 1.566711] ata2.00: applying bridge limits
> [ 1.566925] ata4.00: configured for UDMA/133
> [ 1.567108] ata1.00: configured for UDMA/133
> [ 1.567215] ata6.00: configured for UDMA/133
> [ 1.567292] ata3.00: configured for UDMA/133
> [ 1.567469] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.567522] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.569960] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
> [ 1.570027] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.570143] ata2.00: configured for UDMA/33
> [ 1.572288] ata5.00: configured for UDMA/133
> [ 1.572792] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
> [ 1.573316] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.573729] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.574245] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
> [ 1.574661] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
> [ 1.575264] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
> [ 1.580591] scsi 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.580686] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 1.580780] scsi 2:0:0:0: Attached scsi generic sg2 type 0
> [ 1.580873] scsi 3:0:0:0: Attached scsi generic sg3 type 0
> [ 1.580982] scsi 4:0:0:0: Attached scsi generic sg4 type 0
> [ 1.581077] scsi 5:0:0:0: Attached scsi generic sg5 type 0
> [ 1.581167] scsi 13:0:0:0: Attached scsi generic sg6 type 3
> [ 1.581468] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.581605] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.581667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.581690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.585973] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 1.586054] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.586210] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 1.586330] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.586356] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.586368] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.586387] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.586449] sd 3:0:0:0: [sdc] Write Protect is off
> [ 1.586451] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 1.586465] sd 4:0:0:0: [sdd] Write Protect is off
> [ 1.586467] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 1.586475] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.586485] sd 5:0:0:0: [sde] Write Protect is off
> [ 1.586487] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
> [ 1.586497] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.586509] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.587245] sd 2:0:0:0: [sdb] Write Protect is off
> [ 1.587307] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.587338] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.588698] sdc: sdc1 sdc2 sdc3
> [ 1.589496] sd 3:0:0:0: [sdc] Attached SCSI disk
> [ 1.590906] sda: sda1 sda2 sda3
> [ 1.591865] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.593481] sde: sde1 sde2 sde3
> [ 1.594276] sdd: sdd1 sdd2 sdd3
> [ 1.594314] sd 5:0:0:0: [sde] Attached SCSI disk
> [ 1.594932] sd 4:0:0:0: [sdd] Attached SCSI disk
> [ 1.600418] sdb: sdb1 sdb2 sdb3
> [ 1.603051] sd 2:0:0:0: [sdb] Attached SCSI disk
> [ 1.739569] tsc: Refined TSC clocksource calibration: 2806.362 MHz
> [ 1.787798] usb 10-1: new low-speed USB device number 2 using uhci_hcd
> [ 1.863838] random: nonblocking pool is initialized
> [ 1.963523] usb 10-1: New USB device found, idVendor=046d, idProduct=c01e
> [ 1.963594] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 1.963682] usb 10-1: Product: USB-PS/2 Optical Mouse
> [ 1.963743] usb 10-1: Manufacturer: Logitech
> [ 1.969570] hidraw: raw HID events driver (C) Jiri Kosina
> [ 1.985640] usbcore: registered new interface driver usbhid
> [ 1.985704] usbhid: USB HID core driver
> [ 1.988165] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input1
> [ 1.988385] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
> [ 2.093913] md: md127 stopped.
> [ 2.096877] md: bind<sdc3>
> [ 2.100551] md: bind<sdb3>
> [ 2.101002] md: bind<sdd3>
> [ 2.101755] md: bind<sde3>
> [ 2.103937] md: bind<sda3>
> [ 2.105230] md: raid10 personality registered for level 10
> [ 2.105640] md/raid10:md127: active with 4 out of 4 devices
> [ 2.105963] created bitmap (466 pages) for device md127
> [ 2.121928] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
> [ 2.149858] md127: detected capacity change from 0 to 1999877701632
> [ 2.149959] RAID10 conf printout:
> [ 2.149963] --- wd:4 rd:4
> [ 2.149966] disk 0, wo:0, o:1, dev:sda3
> [ 2.149977] disk 1, wo:0, o:1, dev:sdc3
> [ 2.149979] disk 2, wo:0, o:1, dev:sdb3
> [ 2.149981] disk 3, wo:0, o:1, dev:sdd3
> [ 2.151501] md127: unknown partition table
> [ 2.187645] device-mapper: uevent: version 1.0.3
> [ 2.187777] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> [ 2.203784] usb 10-2: new low-speed USB device number 3 using uhci_hcd
> [ 2.256305] bio: create slab <bio-1> at 1
> [ 2.324492] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
> [ 2.509650] usb 10-2: New USB device found, idVendor=051d, idProduct=0002
> [ 2.509718] usb 10-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
> [ 2.509797] usb 10-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
> [ 2.509860] usb 10-2: Manufacturer: American Power Conversion
> [ 2.509922] usb 10-2: SerialNumber: JB0539032829
> [ 2.740221] Switched to clocksource tsc
> [ 3.584325] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
> [ 13.730195] systemd-udevd[634]: starting version 204
> [ 14.230269] wmi: Mapper loaded
> [ 14.268895] ATK0110 ATK0110:00: Overriding interface detection
> [ 14.273171] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
> [ 14.273254] ACPI: Power Button [PWRB]
> [ 14.273340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 14.273419] ACPI: Power Button [PWRF]
> [ 14.283478] EDAC MC: Ver: 3.0.0
> [ 14.308356] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
> [ 14.308466] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
> [ 14.308556] EDAC i7core: Driver loaded, 1 memory controller(s) found.
> [ 14.312265] systemd-udevd[674]: renamed network interface eth0 to lan
> [ 14.331814] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
> [ 14.331979] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.332129] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
> [ 14.332290] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.332373] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
> [ 14.332533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.332618] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 14.364866] input: PC Speaker as /devices/platform/pcspkr/input/input4
> [ 14.367777] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
> [ 14.367939] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 14.406498] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
> [ 14.411325] [drm] Initialized drm 1.1.0 20060810
> [ 14.518041] iTCO_vendor_support: vendor-support=0
> [ 14.525770] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
> [ 14.525857] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
> [ 14.525998] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
> [ 14.625084] snd_hda_intel 0000:00:1b.0: irq 93 for MSI/MSI-X
> [ 14.650248] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 14.650376] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 14.650493] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 14.650610] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> [ 14.650726] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
> [ 14.650842] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
> [ 14.650957] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
> [ 14.651074] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
> [ 14.651524] hda_intel: Disabling MSI
> [ 14.651597] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
> [ 14.709942] nouveau: unknown parameter 'perflvl_wr' ignored
> [ 14.710160] MXM: GUID detected in BIOS
> [ 14.727614] md: bind<sde1>
> [ 14.783015] md: bind<sdb1>
> [ 14.789240] md: bind<sda1>
> [ 14.794432] md: bind<sdc1>
> [ 14.832790] md: bind<sdd1>
> [ 14.849298] md: raid1 personality registered for level 1
> [ 14.849563] md/raid1:md0: active with 5 out of 5 mirrors
> [ 14.853347] created bitmap (16 pages) for device md0
> [ 14.864496] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
> [ 14.877323] md0: detected capacity change from 0 to 131465216
> [ 14.877458] RAID1 conf printout:
> [ 14.877462] --- wd:5 rd:5
> [ 14.877465] disk 0, wo:0, o:1, dev:sda1
> [ 14.877467] disk 1, wo:0, o:1, dev:sdc1
> [ 14.877470] disk 2, wo:0, o:1, dev:sdb1
> [ 14.877472] disk 3, wo:0, o:1, dev:sdd1
> [ 14.877474] disk 4, wo:0, o:1, dev:sde1
> [ 14.880346] md0: unknown partition table
> [ 15.468103] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
> [ 15.468394] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
> [ 15.468665] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
> [ 15.468937] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
> [ 15.471500] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
> [ 15.471568] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
> [ 15.471633] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
> [ 15.474291] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
> [ 15.540028] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
> [ 15.540098] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
> [ 15.540347] nouveau [ VBIOS][0000:03:00.0] BIT signature found
> [ 15.540413] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
> [ 15.540890] nouveau 0000:03:00.0: irq 94 for MSI/MSI-X
> [ 15.540903] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
> [ 15.541001] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061bebc800] reclocking of this ram type unsupported
> [ 15.541118] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
> [ 15.541209] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
> [ 15.541301] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
> [ 15.574190] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
> [ 15.574286] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
> [ 15.574379] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
> [ 15.574493] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
> [ 15.574585] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
> [ 15.574694] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
> [ 15.574943] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
> [ 15.586865] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
> [ 15.586961] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
> [ 15.587055] [TTM] Initializing pool allocator
> [ 15.587144] [TTM] Initializing DMA pool allocator
> [ 15.587236] nouveau [ DRM] VRAM: 512 MiB
> [ 15.587322] nouveau [ DRM] GART: 1048576 MiB
> [ 15.587411] nouveau [ DRM] TMDS table version 2.0
> [ 15.587498] nouveau [ DRM] DCB version 4.0
> [ 15.587585] nouveau [ DRM] DCB outp 00: 01000302 00020030
> [ 15.587674] nouveau [ DRM] DCB outp 01: 02000300 00000000
> [ 15.587763] nouveau [ DRM] DCB outp 02: 08011392 00020020
> [ 15.587852] nouveau [ DRM] DCB outp 03: 04022310 00000000
> [ 15.588002] nouveau [ DRM] DCB conn 00: 00001030
> [ 15.588154] nouveau [ DRM] DCB conn 01: 00002161
> [ 15.588303] nouveau [ DRM] DCB conn 02: 00000200
> [ 15.589281] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 15.589372] [drm] No driver support for vblank timestamp query.
> [ 15.603932] nouveau [ DRM] MM: using COPY0 for buffer copies
> [ 15.688554] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061d20f000
> [ 15.688759] fbcon: nouveaufb (fb0) is primary device
> [ 15.767249] Console: switching to colour frame buffer device 128x48
> [ 15.768248] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
> [ 15.768260] nouveau 0000:03:00.0: registered panic notifier
> [ 15.768282] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
> [ 16.284853] EXT4-fs (dm-0): re-mounted. Opts: (null)
> [ 16.689360] RAID10 conf printout:
> [ 16.689365] --- wd:4 rd:4
> [ 16.689368] disk 0, wo:0, o:1, dev:sda3
> [ 16.689371] disk 1, wo:0, o:1, dev:sdc3
> [ 16.689373] disk 2, wo:0, o:1, dev:sdb3
> [ 16.689375] disk 3, wo:0, o:1, dev:sdd3
> [ 16.797872] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
> [ 17.249405] loop: module loaded
> [ 18.977520] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
> [ 20.193879] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
> [ 20.249294] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
> [ 20.317238] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
> [ 20.354576] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
> [ 20.447409] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 20.519785] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 20.541961] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 20.648313] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
> [ 21.646283] Bridge firewalling registered
> [ 21.649395] device lan entered promiscuous mode
> [ 21.662557] r8169 0000:07:01.0 lan: link down
> [ 21.662578] r8169 0000:07:01.0 lan: link down
> [ 21.663016] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
> [ 21.665403] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
> [ 24.344231] r8169 0000:07:01.0 lan: link up
> [ 24.344492] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
> [ 24.345355] br0: port 1(lan) entered forwarding state
> [ 24.346969] br0: port 1(lan) entered forwarding state
> [ 24.348426] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
> [ 25.342865] RPC: Registered named UNIX socket transport module.
> [ 25.343045] RPC: Registered udp transport module.
> [ 25.343181] RPC: Registered tcp transport module.
> [ 25.343600] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 25.348079] FS-Cache: Loaded
> [ 25.369779] FS-Cache: Netfs 'nfs' registered for caching
> [ 25.421082] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
> [ 25.790688] tun: Universal TUN/TAP device driver, 1.6
> [ 25.790907] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
> [ 26.351334] br0: port 1(lan) entered forwarding state
> [ 38.117820] CacheFiles: Loaded
> [ 39.175686] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 39.183577] NFSD: starting 90-second grace period (net ffffffff81885e00)
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140116182134.GC9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
@ 2014-01-16 20:07 ` Anthony DeRobertis
[not found] ` <52D83BF9.7040502-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-16 20:07 UTC (permalink / raw)
To: Neil Horman; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/16/2014 01:21 PM, Neil Horman wrote:
> Yes, What I would like to see is your backout patch removed, and the the
> following tests preformed:
>
> 1) VT-D off in bios
> 2) VT-D on in bios and nointremap specified on the command line
> 3) VT-D on in bios and nointremap _not_ specified on the command line
>
> If I could see the boot logs for all of those that would be helpful. What would
> be particularly helpful is to know if test (2) results in the problem
> reproducing. If it does that suggests our ability to disable interrupt
> remapping in the kernel is somehow ineffective on your system.
(2) results in the problem reproducing. To be clear, all three tests
have been done without my patch applied. They were built from:
master a6da83f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
To get the dmesg for (1) and (3), I booted into single user, and didn't
go any further. (2) I first booted to single user, but then continued
on—that's why you'll see the much later timestamp loading tun, etc.
**** VT-d=OFF (1)
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #7 SMP Thu Jan 16 12:36:44 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000064 (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf798360 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a820 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 2806.444 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.88 BogoMIPS (lpj=11225776)
[ 0.000124] pid_max: default: 32768 minimum: 301
[ 0.000217] Security Framework initialized
[ 0.000278] AppArmor: AppArmor disabled by boot time parameter
[ 0.000339] Yama: becoming mindful.
[ 0.002279] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010485] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013870] Mount-cache hash table entries: 256
[ 0.014090] Initializing cgroup subsys memory
[ 0.014154] Initializing cgroup subsys devices
[ 0.014213] Initializing cgroup subsys freezer
[ 0.014273] Initializing cgroup subsys blkio
[ 0.014332] Initializing cgroup subsys perf_event
[ 0.014410] CPU: Physical Processor ID: 0
[ 0.014468] CPU: Processor Core ID: 0
[ 0.014529] mce: CPU supports 9 MCE banks
[ 0.014597] CPU0: Thermal monitoring enabled (TM1)
[ 0.014666] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014666] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014666] tlb_flushall_shift: 6
[ 0.014832] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015928] ACPI: Core revision 20131115
[ 0.019468] ACPI: All ACPI Tables successfully acquired
[ 0.065646] Switched APIC routing to physical flat.
[ 0.066214] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.105972] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.211879] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.212111] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.212173] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.212238] ... version: 3
[ 0.212297] ... bit width: 48
[ 0.212355] ... generic registers: 4
[ 0.212413] ... value mask: 0000ffffffffffff
[ 0.212474] ... max period: 000000007fffffff
[ 0.212534] ... fixed-purpose events: 3
[ 0.212593] ... event mask: 000000070000000f
[ 0.213000] x86: Booting SMP configuration:
[ 0.227448] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.229644] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.244025] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.260581] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.213060] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.322375] x86: Booted up 1 node, 8 CPUs
[ 0.322488] smpboot: Total of 8 processors activated (44903.10 BogoMIPS)
[ 0.327080] devtmpfs: initialized
[ 0.330516] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.330743] NET: Registered protocol family 16
[ 0.330872] cpuidle: using governor ladder
[ 0.330931] cpuidle: using governor menu
[ 0.331008] ACPI: bus type PCI registered
[ 0.331067] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.331195] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.331276] PCI: not using MMCONFIG
[ 0.331334] PCI: Using configuration type 1 for base access
[ 0.333282] bio: create slab at 0
[ 0.333451] ACPI: Added _OSI(Module Device)
[ 0.333510] ACPI: Added _OSI(Processor Device)
[ 0.333569] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.333628] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.335304] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.371960] ACPI: SSDT 00000000bf7983a0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.372415] ACPI: Dynamic OEM Table Load:
[ 0.372548] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.372780] ACPI: SSDT 00000000bf79a1c0 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.373132] ACPI: Dynamic OEM Table Load:
[ 0.373264] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.373590] ACPI: Interpreter enabled
[ 0.373654] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.373818] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.373876] ACPI: Using IOAPIC for interrupt routing
[ 0.373954] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.374894] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.388690] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388882] ACPI: No dock devices found.
[ 0.394846] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.394912] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.394994] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.395343] PCI host bridge to bus 0000:00
[ 0.395403] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.395463] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.395525] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.395588] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.395651] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.395715] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.395778] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.395850] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.395892] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.395965] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.396009] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.396054] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.396140] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.396184] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.396228] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.396314] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.396358] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.396402] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.396490] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.396531] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.396575] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.396666] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.396757] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.396846] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.396933] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.397019] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.397056] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.397138] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.397224] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.397261] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.397343] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.397430] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.397466] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.397547] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.397642] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.397660] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.397739] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.397786] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.397875] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.397888] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.397945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.398012] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.398071] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.398119] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.398207] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.398266] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.398314] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.398402] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.398439] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.398520] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.398608] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.398644] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.398725] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.398812] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.398848] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.398929] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.399024] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.399043] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.399121] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.399168] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.399254] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.399333] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.399420] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.399489] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.399580] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.399645] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.399815] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.399831] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.399838] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.399844] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.399851] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.399857] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.399864] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.399903] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.399974] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.399987] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.400004] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.400114] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.400123] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.400130] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.400136] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.400142] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.400149] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.400155] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.400162] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.400189] pci 0000:01:00.0: PME# supported from D3hot
[ 0.407954] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.408024] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.408026] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.408088] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.408103] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.408175] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.415952] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.416020] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.416067] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.416076] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.416085] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.416094] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.416100] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.416106] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.416173] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.416182] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.423978] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.424046] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.424049] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.424053] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.424099] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.424206] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.424272] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.424351] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.424380] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.424392] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.424405] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.424417] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.424430] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.424442] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.424455] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.424505] pci 0000:05:00.0: PME# supported from D3hot
[ 0.431975] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.432043] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.432046] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.432087] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.432104] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.432113] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.432148] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.432180] pci 0000:07:01.0: supports D1 D2
[ 0.432182] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.432219] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.432234] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.432243] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.432304] pci 0000:07:02.0: supports D2
[ 0.432306] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.432362] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.432427] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.432430] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.432435] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.432436] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.432438] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.432439] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.432441] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.432442] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.432875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.433385] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.433892] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.434401] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.434908] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.435416] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.437769] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.438277] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.438832] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.438971] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.439016] Found 1 acpi root devices
[ 0.439092] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439172] vgaarb: loaded
[ 0.439227] vgaarb: bridge control possible 0000:03:00.0
[ 0.439318] PCI: Using ACPI for IRQ routing
[ 0.444657] PCI: Discovered peer bus ff
[ 0.444715] PCI: root bus ff: using default resources
[ 0.444716] PCI: Probing PCI hardware (bus ff)
[ 0.444735] PCI host bridge to bus 0000:ff
[ 0.444796] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.444858] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.444921] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.445004] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.445038] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.445068] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.445096] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.445125] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.445153] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.445182] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.445210] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.445238] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.445266] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.445295] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.445324] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.445352] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.445383] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.445412] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.445441] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.445468] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.445496] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.445524] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.445561] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.445565] PCI: pci_cache_line_size set to 64 bytes
[ 0.445637] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.445638] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.445718] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.445784] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.446029] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.449293] Switched to clocksource hpet
[ 0.450619] pnp: PnP ACPI init
[ 0.450681] ACPI: bus type PNP registered
[ 0.450780] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 0.450844] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.450908] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.450971] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.451034] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.451097] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.451160] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.451189] pnp 00:01: [dma 4]
[ 0.451204] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.451229] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.451246] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.451267] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.451342] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.451405] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.451581] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.451645] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.451707] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.451770] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.451832] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.451896] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.451959] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.452030] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452095] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.452141] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.454038] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.454107] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454225] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.454289] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.454353] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454509] pnp 00:0b: [dma 0 disabled]
[ 0.454557] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.454598] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.454657] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.454722] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454875] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.454939] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.455003] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.455067] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.455131] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.455195] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.455294] pnp: PnP ACPI: found 15 devices
[ 0.455352] ACPI: bus type PNP unregistered
[ 0.461286] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.461289] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.461300] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.461312] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.461377] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.461378] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.461380] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.461383] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.461447] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.461526] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.461589] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.461650] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.461713] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.461780] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.461841] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.461908] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.461969] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.462032] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.462097] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.462177] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.462243] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.462303] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.462368] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.462432] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.462515] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.462592] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.462653] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.462717] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.462781] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.462862] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.462923] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.462987] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.463055] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.463057] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.463058] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.463060] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.463061] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.463063] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.463064] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.463066] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.463067] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.463069] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.463071] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.463072] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.463074] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.463075] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.463077] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.463078] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.463080] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.463081] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.463083] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.463084] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.463086] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.463087] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.463089] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.463090] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.463092] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.463093] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.463096] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.463097] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.463171] NET: Registered protocol family 2
[ 0.463488] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.464003] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.464181] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.464257] TCP: reno registered
[ 0.464339] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.464504] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.464721] NET: Registered protocol family 1
[ 0.466283] pci 0000:03:00.0: Boot video device
[ 0.466296] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.466340] Unpacking initramfs...
[ 0.740141] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
[ 0.740222] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.740286] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.740597] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740663] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740728] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740794] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740859] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740925] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740990] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741054] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741152] microcode: Microcode Update Driver: v2.00, Peter Oruba
[ 0.741534] audit: initializing netlink socket (disabled)
[ 0.741601] type=2000 audit(1389901199.596:1): initialized
[ 0.756261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.757090] VFS: Disk quotas dquot_6.5.2
[ 0.757175] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.757306] msgmni has been set to 32768
[ 0.758625] alg: No test for stdrng (krng)
[ 0.758703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.758819] io scheduler noop registered
[ 0.758877] io scheduler deadline registered
[ 0.758957] io scheduler cfq registered (default)
[ 0.759186] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.759369] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.759511] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 0.759573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.759644] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.759727] intel_idle: MWAIT substates: 0x1120
[ 0.759737] intel_idle: v0.4 model 0x1A
[ 0.759738] intel_idle: lapic_timer_reliable_states 0x2
[ 0.759895] GHES: HEST is not enabled!
[ 0.759992] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.782094] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.782514] Linux agpgart interface v0.103
[ 0.782667] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.782730] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.783288] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.783422] mousedev: PS/2 mouse device common for all mice
[ 0.783512] rtc_cmos 00:02: RTC can wake from S4
[ 0.783673] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.783757] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.783842] AMD IOMMUv2 driver by Joerg Roedel
[ 0.785646] AMD IOMMUv2 functionality not available on this system
[ 0.785791] TCP: cubic registered
[ 0.787327] NET: Registered protocol family 10
[ 0.788065] mip6: Mobile IPv6
[ 0.788122] NET: Registered protocol family 17
[ 0.788182] mpls_gso: MPLS GSO support
[ 0.788553] registered taskstats version 1
[ 0.789904] rtc_cmos 00:02: setting system clock to 2014-01-16 19:40:00 UTC (1389901200)
[ 0.790000] PM: Hibernation image not present or could not be loaded.
[ 0.790974] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.791053] Write protecting the kernel read-only data: 8192k
[ 0.794298] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.795572] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.807675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.857845] systemd-udevd[95]: starting version 204
[ 0.874192] ACPI: bus type USB registered
[ 0.874277] usbcore: registered new interface driver usbfs
[ 0.874349] usbcore: registered new interface driver hub
[ 0.874975] SCSI subsystem initialized
[ 0.875218] usbcore: registered new device driver usb
[ 0.875999] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.876068] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.876281] libata version 3.00 loaded.
[ 0.876284] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
[ 0.876291] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
[ 0.876298] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.876304] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.876308] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.876313] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.876317] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.876321] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.876421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.876485] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876565] usb usb1: Product: xHCI Host Controller
[ 0.876630] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.876696] usb usb1: SerialNumber: 0000:02:00.0
[ 0.876863] hub 1-0:1.0: USB hub found
[ 0.876935] hub 1-0:1.0: 2 ports detected
[ 0.877112] ahci 0000:00:1f.2: version 3.0
[ 0.877151] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.877218] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.877268] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
[ 0.877331] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.877415] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.879590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.879825] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.879892] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879975] usb usb2: Product: xHCI Host Controller
[ 0.880039] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.880105] usb usb2: SerialNumber: 0000:02:00.0
[ 0.880179] ehci-pci: EHCI PCI platform driver
[ 0.880180] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.880270] hub 2-0:1.0: USB hub found
[ 0.880277] hub 2-0:1.0: 2 ports detected
[ 0.883123] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.883270] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.885421] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc9000307e000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.885534] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.918863] scsi0 : ahci
[ 0.919220] scsi1 : ahci
[ 0.919432] scsi2 : ahci
[ 0.919597] scsi3 : ahci
[ 0.919756] scsi4 : ahci
[ 0.919908] scsi5 : ahci
[ 0.919990] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
[ 0.920069] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
[ 0.920147] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
[ 0.920225] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
[ 0.920303] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
[ 0.920381] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
[ 0.920547] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
[ 0.920561] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 0.920620] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.920624] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.920661] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.920713] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.920715] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920716] usb usb3: Product: UHCI Host Controller
[ 0.920717] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.920718] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.920845] hub 3-0:1.0: USB hub found
[ 0.920850] hub 3-0:1.0: 2 ports detected
[ 0.921056] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.921060] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.921095] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.921144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921146] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921147] usb usb4: Product: UHCI Host Controller
[ 0.921148] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921148] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.921244] hub 4-0:1.0: USB hub found
[ 0.921248] hub 4-0:1.0: 2 ports detected
[ 0.921453] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.921458] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.921496] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.921546] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921547] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921548] usb usb5: Product: UHCI Host Controller
[ 0.921549] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921550] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.921644] hub 5-0:1.0: USB hub found
[ 0.921650] hub 5-0:1.0: 2 ports detected
[ 0.921840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.921845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.921880] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.921930] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921932] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921933] usb usb6: Product: UHCI Host Controller
[ 0.921935] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921936] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.922018] hub 6-0:1.0: USB hub found
[ 0.922023] hub 6-0:1.0: 2 ports detected
[ 0.922221] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.922225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.922252] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.922297] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.922299] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.922300] usb usb7: Product: UHCI Host Controller
[ 0.922301] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.922302] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.922389] hub 7-0:1.0: USB hub found
[ 0.922395] hub 7-0:1.0: 2 ports detected
[ 0.922577] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.922581] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.922605] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.922652] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.922654] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.922655] usb usb8: Product: UHCI Host Controller
[ 0.922656] usb usb8: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.922657] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.922745] hub 8-0:1.0: USB hub found
[ 0.922750] hub 8-0:1.0: 2 ports detected
[ 0.923125] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.923129] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 9
[ 0.923140] ehci-pci 0000:00:1a.7: debug port 1
[ 0.927035] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.927044] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.937486] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.937515] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.937517] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 0.937713] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.937776] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.937854] usb usb9: Product: EHCI Host Controller
[ 0.937914] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.937976] usb usb9: SerialNumber: 0000:00:1a.7
[ 0.938180] hub 9-0:1.0: USB hub found
[ 0.938208] scsi6 : ahci
[ 0.938299] hub 9-0:1.0: 6 ports detected
[ 0.938349] scsi7 : ahci
[ 0.938473] scsi8 : ahci
[ 0.938629] scsi9 : ahci
[ 0.938815] scsi10 : ahci
[ 0.938964] scsi11 : ahci
[ 0.939120] scsi12 : ahci
[ 0.939277] scsi13 : ahci
[ 0.939361] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
[ 0.939439] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
[ 0.939517] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
[ 0.939596] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
[ 0.939674] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
[ 0.939753] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
[ 0.939831] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
[ 0.939909] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
[ 0.940100] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.940182] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.940472] scsi14 : ahci
[ 0.940586] scsi15 : ahci
[ 0.940674] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 0.940754] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 0.957676] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.961649] hub 3-0:1.0: USB hub found
[ 0.961719] hub 3-0:1.0: 2 ports detected
[ 0.985590] hub 4-0:1.0: USB hub found
[ 0.985660] hub 4-0:1.0: 2 ports detected
[ 1.009642] hub 5-0:1.0: USB hub found
[ 1.009708] hub 5-0:1.0: 2 ports detected
[ 1.010104] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.010168] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 1.010258] ehci-pci 0000:00:1d.7: debug port 1
[ 1.014216] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.014222] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 1.025591] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.025687] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.025751] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.025829] usb usb10: Product: EHCI Host Controller
[ 1.025889] usb usb10: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 1.025950] usb usb10: SerialNumber: 0000:00:1d.7
[ 1.026309] hub 10-0:1.0: USB hub found
[ 1.026377] hub 10-0:1.0: 6 ports detected
[ 1.051054] hub 6-0:1.0: USB hub found
[ 1.051120] hub 6-0:1.0: 2 ports detected
[ 1.073673] hub 7-0:1.0: USB hub found
[ 1.073743] hub 7-0:1.0: 2 ports detected
[ 1.097672] hub 8-0:1.0: USB hub found
[ 1.097745] hub 8-0:1.0: 2 ports detected
[ 1.257759] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.257788] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.257904] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.257980] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.258056] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.258070] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.258193] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.258269] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.258344] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.258533] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.258827] ata14.00: configured for UDMA/66
[ 1.266639] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.409816] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.409900] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.409975] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.410050] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.410124] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.410198] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.411015] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411093] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411360] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411427] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411500] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411576] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411647] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.411710] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411784] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411847] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.412562] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.412631] ata2.00: applying bridge limits
[ 1.412847] ata1.00: configured for UDMA/133
[ 1.412922] ata4.00: configured for UDMA/133
[ 1.413127] ata6.00: configured for UDMA/133
[ 1.413207] ata3.00: configured for UDMA/133
[ 1.413256] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.413773] ata5.00: configured for UDMA/133
[ 1.415948] ata2.00: configured for UDMA/33
[ 1.417930] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.418198] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.418453] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.418690] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.418954] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.419344] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419371] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419414] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.419416] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.419435] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.419596] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419617] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419621] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419674] sd 5:0:0:0: [sde] Write Protect is off
[ 1.419676] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.419711] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.419712] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.419714] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.419722] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.419724] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.419740] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.419786] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.420390] sd 0:0:0:0: [sda] Write Protect is off
[ 1.420453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.420480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.420490] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.421132] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.421228] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.421318] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.421410] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.421501] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.421589] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.421688] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.425550] sda: sda1 sda2 sda3
[ 1.425885] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.425951] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.426024] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.426174] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.434266] sde: sde1 sde2 sde3
[ 1.435114] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.435477] sdd: sdd1 sdd2 sdd3
[ 1.435558] sdb: sdb1 sdb2 sdb3
[ 1.435946] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.435985] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.449048] sdc: sdc1 sdc2 sdc3
[ 1.449800] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.457782] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.723574] random: nonblocking pool is initialized
[ 1.737725] tsc: Refined TSC clocksource calibration: 2806.363 MHz
[ 1.782713] md: md127 stopped.
[ 1.785412] md: bind
[ 1.785653] md: bind
[ 1.786465] md: bind
[ 1.792633] md: bind
[ 1.792886] md: bind
[ 1.794330] md: raid10 personality registered for level 10
[ 1.794987] md/raid10:md127: active with 4 out of 4 devices
[ 1.795221] created bitmap (466 pages) for device md127
[ 1.808717] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 1.833843] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 1.839039] md127: detected capacity change from 0 to 1999877701632
[ 1.839176] RAID10 conf printout:
[ 1.839177] --- wd:4 rd:4
[ 1.839178] disk 0, wo:0, o:1, dev:sda3
[ 1.839180] disk 1, wo:0, o:1, dev:sdc3
[ 1.839182] disk 2, wo:0, o:1, dev:sdb3
[ 1.839183] disk 3, wo:0, o:1, dev:sdd3
[ 1.840591] md127: unknown partition table
[ 1.876071] device-mapper: uevent: version 1.0.3
[ 1.876194] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 1.923759] bio: create slab at 1
[ 1.998427] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 1.998493] EXT4-fs (dm-0): write access will be enabled during recovery
[ 2.010915] usb 8-1: New USB device found, idVendor=046d, idProduct=c01e
[ 2.010979] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.011043] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 2.011103] usb 8-1: Manufacturer: Logitech
[ 2.017732] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.034182] usbcore: registered new interface driver usbhid
[ 2.034246] usbhid: USB HID core driver
[ 2.036312] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 2.036682] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.182901] RAID10 conf printout:
[ 2.182906] --- wd:4 rd:4
[ 2.182909] disk 0, wo:0, o:1, dev:sda3
[ 2.182912] disk 1, wo:0, o:1, dev:sdc3
[ 2.182914] disk 2, wo:0, o:1, dev:sdb3
[ 2.182916] disk 3, wo:0, o:1, dev:sdd3
[ 2.253955] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.564146] usb 8-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.564212] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.564276] usb 8-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.564338] usb 8-2: Manufacturer: American Power Conversion
[ 2.564399] usb 8-2: SerialNumber: JB0539032829
[ 2.738444] Switched to clocksource tsc
[ 2.826648] EXT4-fs (dm-0): recovery complete
[ 2.832962] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.638785] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 16.436731] systemd-udevd[601]: starting version 204
[ 17.122658] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 17.122835] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.122919] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 17.123078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.123160] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 17.123319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.123400] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 17.135153] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 17.135316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.140636] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 17.140720] ACPI: Power Button [PWRB]
[ 17.140811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 17.140889] ACPI: Power Button [PWRF]
[ 17.146076] EDAC MC: Ver: 3.0.0
[ 17.161008] wmi: Mapper loaded
[ 17.161416] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 17.161542] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 17.161635] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 17.187751] ATK0110 ATK0110:00: Overriding interface detection
[ 17.208448] [drm] Initialized drm 1.1.0 20060810
[ 17.258795] systemd-udevd[641]: renamed network interface eth0 to lan
[ 17.348444] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 17.390538] md: bind
[ 17.454823] md: bind
[ 17.457909] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 17.471002] md: bind
[ 17.481909] iTCO_vendor_support: vendor-support=0
[ 17.494984] md: bind
[ 17.506609] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 17.506701] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 17.506934] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 17.521259] md: bind
[ 17.546721] nouveau: unknown parameter 'perflvl_wr' ignored
[ 17.546976] MXM: GUID detected in BIOS
[ 17.547289] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 17.547352] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 17.547414] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 17.548355] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 17.613840] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 17.613904] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 17.614062] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 17.614124] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 17.614478] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
[ 17.614486] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 17.614599] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061e563800] reclocking of this ram type unsupported
[ 17.614723] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 17.614813] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 17.614905] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 17.626916] md: raid1 personality registered for level 1
[ 17.627251] md/raid1:md0: active with 5 out of 5 mirrors
[ 17.635869] created bitmap (16 pages) for device md0
[ 17.644661] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 17.646103] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 17.646214] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 17.646307] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 17.646423] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 17.646516] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 17.646624] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 17.646883] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 17.656891] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 17.656984] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 17.657075] [TTM] Initializing pool allocator
[ 17.657165] [TTM] Initializing DMA pool allocator
[ 17.657259] nouveau [ DRM] VRAM: 512 MiB
[ 17.657346] nouveau [ DRM] GART: 1048576 MiB
[ 17.657435] nouveau [ DRM] TMDS table version 2.0
[ 17.657523] nouveau [ DRM] DCB version 4.0
[ 17.657611] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 17.657700] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 17.657789] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 17.657878] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 17.657968] nouveau [ DRM] DCB conn 00: 00001030
[ 17.658129] nouveau [ DRM] DCB conn 01: 00002161
[ 17.658281] nouveau [ DRM] DCB conn 02: 00000200
[ 17.659044] md0: detected capacity change from 0 to 131465216
[ 17.659181] RAID1 conf printout:
[ 17.659184] --- wd:5 rd:5
[ 17.659186] disk 0, wo:0, o:1, dev:sda1
[ 17.659188] disk 1, wo:0, o:1, dev:sdc1
[ 17.659190] disk 2, wo:0, o:1, dev:sdb1
[ 17.659192] disk 3, wo:0, o:1, dev:sdd1
[ 17.659194] disk 4, wo:0, o:1, dev:sde1
[ 17.659321] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 17.659412] [drm] No driver support for vblank timestamp query.
[ 17.660722] md0: unknown partition table
[ 17.672199] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
[ 17.674214] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 17.706907] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.707078] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.707232] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 17.707383] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.707629] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.707847] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 17.708059] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 17.708274] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 17.760922] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061c846400
[ 17.761352] fbcon: nouveaufb (fb0) is primary device
[ 17.839459] Console: switching to colour frame buffer device 128x48
[ 17.840460] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 17.840472] nouveau 0000:03:00.0: registered panic notifier
[ 17.840487] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 17.840578] hda_intel: Disabling MSI
[ 17.840600] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 18.659216] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 18.659450] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 18.659655] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 18.659873] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 19.290563] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 19.750641] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 20.131119] loop: module loaded
[ 21.421068] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 23.426672] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 23.477651] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 23.532841] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 23.549520] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 23.617604] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.652195] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.667139] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.673819] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.724106] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.735226] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.797771] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.809288] FAT-fs (sdd2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 24.796457] Bridge firewalling registered
[ 24.801378] device lan entered promiscuous mode
[ 24.813799] r8169 0000:07:01.0 lan: link down
[ 24.813827] r8169 0000:07:01.0 lan: link down
[ 24.816340] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 24.819397] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 27.837495] r8169 0000:07:01.0 lan: link up
[ 27.837767] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 27.838706] br0: port 1(lan) entered forwarding state
[ 27.840323] br0: port 1(lan) entered forwarding state
[ 27.841969] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 28.805597] RPC: Registered named UNIX socket transport module.
[ 28.805823] RPC: Registered udp transport module.
[ 28.806081] RPC: Registered tcp transport module.
[ 28.806552] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.815636] FS-Cache: Loaded
[ 28.830140] FS-Cache: Netfs 'nfs' registered for caching
[ 28.886841] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 29.842611] br0: port 1(lan) entered forwarding state
**** VT-d=ON (3)
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #7 SMP Thu Jan 16 12:36:44 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 00006C (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf7984b0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a970 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 2806.421 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.84 BogoMIPS (lpj=11225684)
[ 0.000124] pid_max: default: 32768 minimum: 301
[ 0.000216] Security Framework initialized
[ 0.000276] AppArmor: AppArmor disabled by boot time parameter
[ 0.000338] Yama: becoming mindful.
[ 0.002286] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010492] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013884] Mount-cache hash table entries: 256
[ 0.014106] Initializing cgroup subsys memory
[ 0.014170] Initializing cgroup subsys devices
[ 0.014229] Initializing cgroup subsys freezer
[ 0.014289] Initializing cgroup subsys blkio
[ 0.014348] Initializing cgroup subsys perf_event
[ 0.014427] CPU: Physical Processor ID: 0
[ 0.014485] CPU: Processor Core ID: 0
[ 0.014546] mce: CPU supports 9 MCE banks
[ 0.014615] CPU0: Thermal monitoring enabled (TM1)
[ 0.014683] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014683] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014683] tlb_flushall_shift: 6
[ 0.014848] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015935] ACPI: Core revision 20131115
[ 0.019433] ACPI: All ACPI Tables successfully acquired
[ 0.065638] dmar: Host address width 39
[ 0.065699] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.065766] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.065846] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.065911] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.065990] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.066053] dmar: RMRR base: 0x000000bf7ea000 end: 0x000000bf7fffff
[ 0.066115] dmar: ATSR flags: 0x0
[ 0.066268] This system BIOS has enabled interrupt remapping
[ 0.066268] on a chipset that contains an erratum making that
[ 0.066268] feature unstable. To maintain system stability
[ 0.066268] interrupt remapping is being disabled. Please
[ 0.066268] contact your BIOS vendor for an update
[ 0.066483] Switched APIC routing to physical flat.
[ 0.067047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.109736] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.216477] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.216711] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.216772] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.216838] ... version: 3
[ 0.216896] ... bit width: 48
[ 0.216954] ... generic registers: 4
[ 0.217013] ... value mask: 0000ffffffffffff
[ 0.217073] ... max period: 000000007fffffff
[ 0.217134] ... fixed-purpose events: 3
[ 0.217192] ... event mask: 000000070000000f
[ 0.217597] x86: Booting SMP configuration:
[ 0.231397] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.233588] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.247954] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.265504] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.217657] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.329621] x86: Booted up 1 node, 8 CPUs
[ 0.329733] smpboot: Total of 8 processors activated (44902.73 BogoMIPS)
[ 0.334335] devtmpfs: initialized
[ 0.337892] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.338118] NET: Registered protocol family 16
[ 0.338247] cpuidle: using governor ladder
[ 0.338305] cpuidle: using governor menu
[ 0.338382] ACPI: bus type PCI registered
[ 0.338440] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.338568] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.338649] PCI: not using MMCONFIG
[ 0.338706] PCI: Using configuration type 1 for base access
[ 0.339488] bio: create slab at 0
[ 0.339656] ACPI: Added _OSI(Module Device)
[ 0.339715] ACPI: Added _OSI(Processor Device)
[ 0.339774] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.339833] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.343827] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.376569] ACPI: SSDT 00000000bf7984f0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.377025] ACPI: Dynamic OEM Table Load:
[ 0.377157] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.377389] ACPI: SSDT 00000000bf79a310 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.377742] ACPI: Dynamic OEM Table Load:
[ 0.377874] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.378199] ACPI: Interpreter enabled
[ 0.378263] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.378427] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.378485] ACPI: Using IOAPIC for interrupt routing
[ 0.378563] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.379504] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.393443] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.393635] ACPI: No dock devices found.
[ 0.399594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.399660] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.399741] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.400091] PCI host bridge to bus 0000:00
[ 0.400151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.400212] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.400274] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.400336] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.400400] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.400462] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.400528] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.400599] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.400642] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.400710] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.400755] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.400800] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.400886] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.400930] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.400974] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.401060] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.401104] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.401148] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.401236] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.401277] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.401322] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.401413] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.401503] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.401592] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.401679] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.401765] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.401801] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.401883] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.401970] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.402006] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.402088] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.402174] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.402211] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.402292] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.402385] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.402404] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.402482] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.402529] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.402618] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.402631] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.402688] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.402754] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.402813] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.402860] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.402949] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.403008] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.403054] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.403142] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.403178] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.403261] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.403347] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.403384] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.403464] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.403551] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.403587] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.403668] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.403763] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.403782] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.403860] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.403907] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.403991] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.404071] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.404158] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.404227] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.404318] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.404383] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.404555] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.404572] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.404578] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.404585] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.404591] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.404598] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.404604] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.404643] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.404711] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.404724] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.404741] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.404851] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.404861] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.404867] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.404874] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.404880] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.404886] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.404893] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.404899] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.404927] pci 0000:01:00.0: PME# supported from D3hot
[ 0.412553] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.412622] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.412625] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.412687] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.412702] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.412774] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.420551] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.420617] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.420667] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.420676] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.420685] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.420694] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.420700] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.420706] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.420774] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.420782] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.428572] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.428641] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.428644] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.428648] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.428694] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.428801] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.428867] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.428946] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.428975] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.428987] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.429000] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.429012] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.429025] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.429037] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.429050] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.429100] pci 0000:05:00.0: PME# supported from D3hot
[ 0.436570] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.436637] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.436640] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.436682] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.436699] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.436707] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.436743] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.436774] pci 0000:07:01.0: supports D1 D2
[ 0.436776] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.436812] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.436828] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.436837] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.436898] pci 0000:07:02.0: supports D2
[ 0.436899] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.436956] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.437021] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.437024] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.437029] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.437031] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.437032] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.437034] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.437035] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.437037] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.437470] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.437978] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.438485] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.438991] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.439500] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.441842] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.442350] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.442857] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.443410] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.443549] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.443593] Found 1 acpi root devices
[ 0.443669] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.443749] vgaarb: loaded
[ 0.443805] vgaarb: bridge control possible 0000:03:00.0
[ 0.443895] PCI: Using ACPI for IRQ routing
[ 0.449202] PCI: Discovered peer bus ff
[ 0.449260] PCI: root bus ff: using default resources
[ 0.449261] PCI: Probing PCI hardware (bus ff)
[ 0.449280] PCI host bridge to bus 0000:ff
[ 0.449339] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.449401] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.449464] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.449547] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.449581] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.449611] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.449640] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.449669] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.449697] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.449725] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.449754] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.449782] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.449810] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.449839] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.449868] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.449896] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.449927] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.449955] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.449984] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.450012] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.450040] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.450068] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.450104] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.450108] PCI: pci_cache_line_size set to 64 bytes
[ 0.450180] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.450181] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.450261] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.450327] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.450571] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.453831] Switched to clocksource hpet
[ 0.455153] pnp: PnP ACPI init
[ 0.455216] ACPI: bus type PNP registered
[ 0.455315] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.455380] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.455443] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.455506] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.455569] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.455633] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.455696] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.455725] pnp 00:01: [dma 4]
[ 0.455739] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.455764] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.455781] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.455802] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.455877] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.455941] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.457978] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.458045] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.458107] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.458170] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.458233] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.458297] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.458360] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.458424] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.458503] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.458551] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.458607] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.458671] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.458753] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.458818] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.458881] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459036] pnp 00:0b: [dma 0 disabled]
[ 0.459084] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.459125] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.459184] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.459248] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459399] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.459464] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.459528] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.459591] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.459655] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.459719] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.459816] pnp: PnP ACPI: found 15 devices
[ 0.459875] ACPI: bus type PNP unregistered
[ 0.465807] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.465810] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.465817] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.465829] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.465898] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.465900] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.465902] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.465904] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.465968] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.466047] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.466110] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.466171] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.466235] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.466301] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.466363] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.466430] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.466490] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.466553] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.466618] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.466698] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.466763] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.466824] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.466888] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.466953] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.467035] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.467113] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.467173] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.467237] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.467301] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.467382] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.467443] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.467507] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.467575] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.467576] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.467578] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.467579] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.467581] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.467582] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.467584] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.467585] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.467587] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.467588] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.467590] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.467591] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.467593] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.467594] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.467596] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.467598] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.467599] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.467600] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.467602] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.467603] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.467605] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.467606] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.467608] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.467609] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.467611] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.467612] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.467615] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.467616] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.467691] NET: Registered protocol family 2
[ 0.468009] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.468524] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.468702] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.468778] TCP: reno registered
[ 0.468861] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.469025] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.469241] NET: Registered protocol family 1
[ 0.470801] pci 0000:03:00.0: Boot video device
[ 0.470814] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.470859] Unpacking initramfs...
[ 0.744728] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
[ 0.744817] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.744879] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.746248] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746313] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746379] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746445] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746510] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746576] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746640] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746705] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746801] microcode: Microcode Update Driver: v2.00, Peter Oruba
[ 0.747163] audit: initializing netlink socket (disabled)
[ 0.747230] type=2000 audit(1389900967.604:1): initialized
[ 0.761880] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.762712] VFS: Disk quotas dquot_6.5.2
[ 0.762797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.762926] msgmni has been set to 32768
[ 0.763212] alg: No test for stdrng (krng)
[ 0.763292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.763405] io scheduler noop registered
[ 0.763463] io scheduler deadline registered
[ 0.763541] io scheduler cfq registered (default)
[ 0.763770] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.763951] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.764092] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 0.764155] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.764225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.764307] intel_idle: MWAIT substates: 0x1120
[ 0.764316] intel_idle: v0.4 model 0x1A
[ 0.764317] intel_idle: lapic_timer_reliable_states 0x2
[ 0.764475] GHES: HEST is not enabled!
[ 0.764574] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.785995] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.786382] Linux agpgart interface v0.103
[ 0.786535] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.786597] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.787155] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.787286] mousedev: PS/2 mouse device common for all mice
[ 0.787376] rtc_cmos 00:02: RTC can wake from S4
[ 0.787535] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.787619] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.787704] AMD IOMMUv2 driver by Joerg Roedel
[ 0.787766] AMD IOMMUv2 functionality not available on this system
[ 0.789650] TCP: cubic registered
[ 0.791236] NET: Registered protocol family 10
[ 0.791992] mip6: Mobile IPv6
[ 0.792049] NET: Registered protocol family 17
[ 0.792109] mpls_gso: MPLS GSO support
[ 0.792466] registered taskstats version 1
[ 0.793732] rtc_cmos 00:02: setting system clock to 2014-01-16 19:36:08 UTC (1389900968)
[ 0.793829] PM: Hibernation image not present or could not be loaded.
[ 0.794832] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.794910] Write protecting the kernel read-only data: 8192k
[ 0.798119] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.799470] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.811544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.861561] systemd-udevd[95]: starting version 204
[ 0.876900] ACPI: bus type USB registered
[ 0.876988] usbcore: registered new interface driver usbfs
[ 0.877062] usbcore: registered new interface driver hub
[ 0.877655] usbcore: registered new device driver usb
[ 0.878338] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.878408] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.878620] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
[ 0.878628] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
[ 0.878635] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.878643] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.878649] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.878656] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.878662] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.878669] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.878885] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.878953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879036] usb usb1: Product: xHCI Host Controller
[ 0.879099] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.879166] usb usb1: SerialNumber: 0000:02:00.0
[ 0.879237] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.879558] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.879764] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.879858] hub 1-0:1.0: USB hub found
[ 0.879928] hub 1-0:1.0: 2 ports detected
[ 0.880080] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.880147] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.880907] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.881019] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.881126] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.881190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.881270] usb usb3: Product: UHCI Host Controller
[ 0.881331] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.881393] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.881476] ehci-pci: EHCI PCI platform driver
[ 0.881550] hub 3-0:1.0: USB hub found
[ 0.881616] hub 3-0:1.0: 2 ports detected
[ 0.881738] SCSI subsystem initialized
[ 0.881887] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.881952] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.882077] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.882086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.882088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882089] usb usb2: Product: xHCI Host Controller
[ 0.882090] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.882091] usb usb2: SerialNumber: 0000:02:00.0
[ 0.882199] hub 2-0:1.0: USB hub found
[ 0.882207] hub 2-0:1.0: 2 ports detected
[ 0.882684] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.882752] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882834] usb usb4: Product: UHCI Host Controller
[ 0.882898] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.882964] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.883283] hub 4-0:1.0: USB hub found
[ 0.883352] hub 4-0:1.0: 2 ports detected
[ 0.883623] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.883691] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.883802] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.883914] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.883982] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.884019] libata version 3.00 loaded.
[ 0.884065] usb usb5: Product: UHCI Host Controller
[ 0.884129] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.884194] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.884347] hub 5-0:1.0: USB hub found
[ 0.884415] hub 5-0:1.0: 2 ports detected
[ 0.884678] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.884746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.884858] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.884967] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.885035] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.885117] usb usb6: Product: UHCI Host Controller
[ 0.885180] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.885244] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.885393] hub 6-0:1.0: USB hub found
[ 0.885460] hub 6-0:1.0: 2 ports detected
[ 0.885722] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.885788] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.885893] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.886013] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.886080] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.886161] usb usb7: Product: UHCI Host Controller
[ 0.886223] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.886287] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.886439] hub 7-0:1.0: USB hub found
[ 0.886505] hub 7-0:1.0: 2 ports detected
[ 0.886767] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.886834] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.886944] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.887038] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.887101] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887179] usb usb8: Product: UHCI Host Controller
[ 0.887240] usb usb8: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.889046] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.889230] hub 8-0:1.0: USB hub found
[ 0.889297] hub 8-0:1.0: 2 ports detected
[ 0.889824] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.889893] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 9
[ 0.889995] ehci-pci 0000:00:1a.7: debug port 1
[ 0.892853] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.892990] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.893298] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc9000304c000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.893383] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.893957] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.893965] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.906027] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.906118] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.906183] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.906264] usb usb9: Product: EHCI Host Controller
[ 0.906326] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.907404] usb usb9: SerialNumber: 0000:00:1a.7
[ 0.907599] hub 9-0:1.0: USB hub found
[ 0.907665] hub 9-0:1.0: 6 ports detected
[ 0.930118] hub 3-0:1.0: USB hub found
[ 0.930186] hub 3-0:1.0: 2 ports detected
[ 0.955448] hub 4-0:1.0: USB hub found
[ 0.955512] hub 4-0:1.0: 2 ports detected
[ 0.966142] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.978217] hub 5-0:1.0: USB hub found
[ 0.978286] hub 5-0:1.0: 2 ports detected
[ 0.978731] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.978796] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 0.978885] ehci-pci 0000:00:1d.7: debug port 1
[ 0.982846] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.982851] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 0.994076] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.994193] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.994257] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.994335] usb usb10: Product: EHCI Host Controller
[ 0.994395] usb usb10: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.994456] usb usb10: SerialNumber: 0000:00:1d.7
[ 0.994773] hub 10-0:1.0: USB hub found
[ 0.994841] hub 10-0:1.0: 6 ports detected
[ 1.018177] hub 6-0:1.0: USB hub found
[ 1.018248] hub 6-0:1.0: 2 ports detected
[ 1.042161] hub 7-0:1.0: USB hub found
[ 1.042231] hub 7-0:1.0: 2 ports detected
[ 1.066287] hub 8-0:1.0: USB hub found
[ 1.066351] hub 8-0:1.0: 2 ports detected
[ 1.066538] ahci 0000:00:1f.2: version 3.0
[ 1.066697] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
[ 1.066763] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.066845] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.106777] scsi0 : ahci
[ 1.107563] scsi1 : ahci
[ 1.107890] scsi2 : ahci
[ 1.108201] scsi3 : ahci
[ 1.108491] scsi4 : ahci
[ 1.108735] scsi5 : ahci
[ 1.108847] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
[ 1.108930] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
[ 1.109008] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
[ 1.109086] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
[ 1.109164] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
[ 1.109243] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
[ 1.109391] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
[ 1.109403] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 1.122131] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.122218] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 1.122985] scsi6 : ahci
[ 1.123267] scsi7 : ahci
[ 1.123529] scsi8 : ahci
[ 1.123803] scsi9 : ahci
[ 1.124006] scsi10 : ahci
[ 1.124219] scsi11 : ahci
[ 1.124431] scsi12 : ahci
[ 1.124647] scsi13 : ahci
[ 1.124754] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
[ 1.124834] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
[ 1.124912] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
[ 1.124990] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
[ 1.125068] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
[ 1.125147] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
[ 1.125224] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
[ 1.125302] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
[ 1.125490] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.125571] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.125830] scsi14 : ahci
[ 1.126012] scsi15 : ahci
[ 1.126143] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 1.126226] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 1.438307] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.442314] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.442398] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.442474] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.446352] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.446383] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.446422] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.446559] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.446636] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.446825] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.447117] ata14.00: configured for UDMA/66
[ 1.450360] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.466465] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.594452] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.595627] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.595694] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.597075] ata4.00: configured for UDMA/133
[ 1.598303] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.598382] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.598461] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.599583] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.599650] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.599720] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.599782] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.602226] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.602311] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.602382] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.602474] ata2.00: applying bridge limits
[ 1.602539] ata3.00: configured for UDMA/133
[ 1.602607] ata1.00: configured for UDMA/133
[ 1.602965] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.603468] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.603539] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.603849] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.603913] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.604868] ata6.00: configured for UDMA/133
[ 1.605602] ata2.00: configured for UDMA/33
[ 1.605844] ata5.00: configured for UDMA/133
[ 1.607687] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.608132] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.608538] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.609060] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.609439] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.610174] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.616220] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.616332] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.616446] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.616560] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.616673] scsi 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.616781] scsi 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.616901] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.618823] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.618965] sd 0:0:0:0: [sda] Write Protect is off
[ 1.619026] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.619061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.621436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.621516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.621649] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.621760] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621786] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621829] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621854] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621875] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.621877] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.621894] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.621896] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.621900] sd 5:0:0:0: [sde] Write Protect is off
[ 1.621902] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.621908] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.621920] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.621922] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.622590] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.622651] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.622673] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.623811] sdc: sdc1 sdc2 sdc3
[ 1.624194] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.625441] sda: sda1 sda2 sda3
[ 1.627161] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.637058] sdb: sdb1 sdb2 sdb3
[ 1.637822] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.637925] sdd: sdd1 sdd2 sdd3
[ 1.638454] sde: sde1 sde2 sde3
[ 1.638573] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.638931] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.746302] tsc: Refined TSC clocksource calibration: 2806.363 MHz
[ 1.802305] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 1.898833] random: nonblocking pool is initialized
[ 1.978588] usb 8-1: New USB device found, idVendor=046d, idProduct=c01e
[ 1.978658] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.978726] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 1.978785] usb 8-1: Manufacturer: Logitech
[ 1.985316] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.001690] usbcore: registered new interface driver usbhid
[ 2.001753] usbhid: USB HID core driver
[ 2.003384] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 2.003551] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.039117] md: md127 stopped.
[ 2.046723] md: bind
[ 2.046988] md: bind
[ 2.047418] md: bind
[ 2.047645] md: bind
[ 2.047889] md: bind
[ 2.050849] md: raid10 personality registered for level 10
[ 2.051265] md/raid10:md127: active with 4 out of 4 devices
[ 2.051469] created bitmap (466 pages) for device md127
[ 2.064483] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 2.095159] md127: detected capacity change from 0 to 1999877701632
[ 2.095267] RAID10 conf printout:
[ 2.095268] --- wd:4 rd:4
[ 2.095270] disk 0, wo:0, o:1, dev:sda3
[ 2.095271] disk 1, wo:0, o:1, dev:sdc3
[ 2.095273] disk 2, wo:0, o:1, dev:sdb3
[ 2.095276] disk 3, wo:0, o:1, dev:sdd3
[ 2.096861] md127: unknown partition table
[ 2.134608] device-mapper: uevent: version 1.0.3
[ 2.134738] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 2.176145] bio: create slab at 1
[ 2.218604] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.267969] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.526755] usb 8-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.526825] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.526892] usb 8-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.526954] usb 8-2: Manufacturer: American Power Conversion
[ 2.527015] usb 8-2: SerialNumber: JB0539032829
[ 2.746992] Switched to clocksource tsc
[ 3.597312] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 13.741963] systemd-udevd[626]: starting version 204
[ 14.299462] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 14.299639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.299723] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.299881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.299964] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.300123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.300205] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.407460] EDAC MC: Ver: 3.0.0
[ 14.429438] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 14.429602] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.448825] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 14.448936] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 14.449026] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 14.490131] [drm] Initialized drm 1.1.0 20060810
[ 14.502643] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 14.502727] ACPI: Power Button [PWRB]
[ 14.502817] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.502896] ACPI: Power Button [PWRF]
[ 14.522247] wmi: Mapper loaded
[ 14.542412] systemd-udevd[683]: renamed network interface eth0 to lan
[ 14.552317] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 14.563209] ATK0110 ATK0110:00: Overriding interface detection
[ 14.595486] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.635604] md: bind
[ 14.694890] md: bind
[ 14.725937] md: bind
[ 14.758685] md: bind
[ 14.774799] nouveau: unknown parameter 'perflvl_wr' ignored
[ 14.775139] MXM: GUID detected in BIOS
[ 14.775498] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 14.775562] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 14.775624] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 14.776552] iTCO_vendor_support: vendor-support=0
[ 14.776594] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 14.790387] md: bind
[ 14.793534] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 14.793619] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 14.793757] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 14.841699] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 14.841764] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 14.841922] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 14.841984] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 14.842288] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
[ 14.842295] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 14.842489] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061eff7000] reclocking of this ram type unsupported
[ 14.842606] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 14.842694] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 14.842783] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 14.873936] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 14.874033] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 14.874126] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 14.874240] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 14.874332] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 14.874450] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 14.874699] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 14.879935] md: raid1 personality registered for level 1
[ 14.880230] md/raid1:md0: active with 5 out of 5 mirrors
[ 14.880573] created bitmap (16 pages) for device md0
[ 14.881371] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 14.882919] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 14.883011] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.883100] [TTM] Initializing pool allocator
[ 14.883188] [TTM] Initializing DMA pool allocator
[ 14.883281] nouveau [ DRM] VRAM: 512 MiB
[ 14.883367] nouveau [ DRM] GART: 1048576 MiB
[ 14.883455] nouveau [ DRM] TMDS table version 2.0
[ 14.883543] nouveau [ DRM] DCB version 4.0
[ 14.883630] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 14.883719] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 14.883807] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 14.883896] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 14.883985] nouveau [ DRM] DCB conn 00: 00001030
[ 14.884134] nouveau [ DRM] DCB conn 01: 00002161
[ 14.884283] nouveau [ DRM] DCB conn 02: 00000200
[ 14.887065] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.887158] [drm] No driver support for vblank timestamp query.
[ 14.900084] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 14.902739] md0: detected capacity change from 0 to 131465216
[ 14.902846] RAID1 conf printout:
[ 14.902849] --- wd:5 rd:5
[ 14.902851] disk 0, wo:0, o:1, dev:sda1
[ 14.902852] disk 1, wo:0, o:1, dev:sdc1
[ 14.902854] disk 2, wo:0, o:1, dev:sdb1
[ 14.902856] disk 3, wo:0, o:1, dev:sdd1
[ 14.902857] disk 4, wo:0, o:1, dev:sde1
[ 14.904780] md0: unknown partition table
[ 14.928803] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
[ 14.959707] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.959907] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.960109] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.960308] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.960508] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.960689] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.962628] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.962807] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 14.990343] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88003703b000
[ 14.990658] fbcon: nouveaufb (fb0) is primary device
[ 15.066348] Console: switching to colour frame buffer device 128x48
[ 15.068737] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 15.068745] nouveau 0000:03:00.0: registered panic notifier
[ 15.068768] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 15.068973] hda_intel: Disabling MSI
[ 15.068993] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 15.878936] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 15.879171] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 15.879383] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 15.881428] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 16.469425] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 16.834273] RAID10 conf printout:
[ 16.834281] --- wd:4 rd:4
[ 16.834284] disk 0, wo:0, o:1, dev:sda3
[ 16.834287] disk 1, wo:0, o:1, dev:sdc3
[ 16.834289] disk 2, wo:0, o:1, dev:sdb3
[ 16.834291] disk 3, wo:0, o:1, dev:sdd3
[ 16.965953] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 17.478143] loop: module loaded
[ 18.780774] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 19.769993] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 19.898051] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 19.964800] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 19.972941] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 20.047164] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.091017] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.129998] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.169096] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 21.175365] Bridge firewalling registered
[ 21.178143] device lan entered promiscuous mode
[ 21.189135] r8169 0000:07:01.0 lan: link down
[ 21.189150] r8169 0000:07:01.0 lan: link down
[ 21.189582] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 21.191974] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 24.037322] r8169 0000:07:01.0 lan: link up
[ 24.037580] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 24.038513] br0: port 1(lan) entered forwarding state
[ 24.041839] br0: port 1(lan) entered forwarding state
[ 24.043288] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 25.226276] RPC: Registered named UNIX socket transport module.
[ 25.226508] RPC: Registered udp transport module.
[ 25.226729] RPC: Registered tcp transport module.
[ 25.227109] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.236203] FS-Cache: Loaded
[ 25.253009] FS-Cache: Netfs 'nfs' registered for caching
[ 25.281657] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 26.047541] br0: port 1(lan) entered forwarding state
**** VT-d=ON, nointremap (2)
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #7 SMP Thu Jan 16 12:36:44 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose nointremap
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 00006C (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf7984b0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a970 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose nointremap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.004000] tsc: PIT calibration matches HPET. 1 loops
[ 0.004000] tsc: Detected 2806.439 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.87 BogoMIPS (lpj=11225756)
[ 0.000122] pid_max: default: 32768 minimum: 301
[ 0.000214] Security Framework initialized
[ 0.000274] AppArmor: AppArmor disabled by boot time parameter
[ 0.000334] Yama: becoming mindful.
[ 0.002275] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010481] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013876] Mount-cache hash table entries: 256
[ 0.014097] Initializing cgroup subsys memory
[ 0.014160] Initializing cgroup subsys devices
[ 0.014218] Initializing cgroup subsys freezer
[ 0.014277] Initializing cgroup subsys blkio
[ 0.014336] Initializing cgroup subsys perf_event
[ 0.014413] CPU: Physical Processor ID: 0
[ 0.014470] CPU: Processor Core ID: 0
[ 0.014530] mce: CPU supports 9 MCE banks
[ 0.014598] CPU0: Thermal monitoring enabled (TM1)
[ 0.014666] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014666] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014666] tlb_flushall_shift: 6
[ 0.014828] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015927] ACPI: Core revision 20131115
[ 0.019466] ACPI: All ACPI Tables successfully acquired
[ 0.065675] dmar: Host address width 39
[ 0.065736] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.065801] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.065880] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.065944] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.066022] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.066084] dmar: RMRR base: 0x000000bf7ea000 end: 0x000000bf7fffff
[ 0.066145] dmar: ATSR flags: 0x0
[ 0.066358] Switched APIC routing to physical flat.
[ 0.066922] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.108291] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.215847] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.216079] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.216140] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.216204] ... version: 3
[ 0.216261] ... bit width: 48
[ 0.216318] ... generic registers: 4
[ 0.216376] ... value mask: 0000ffffffffffff
[ 0.216436] ... max period: 000000007fffffff
[ 0.216495] ... fixed-purpose events: 3
[ 0.216552] ... event mask: 000000070000000f
[ 0.216959] x86: Booting SMP configuration:
[ 0.231268] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.233459] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.247832] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.260653] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.217018] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.323852] x86: Booted up 1 node, 8 CPUs
[ 0.323965] smpboot: Total of 8 processors activated (44903.02 BogoMIPS)
[ 0.331504] devtmpfs: initialized
[ 0.334938] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.335161] NET: Registered protocol family 16
[ 0.335291] cpuidle: using governor ladder
[ 0.335349] cpuidle: using governor menu
[ 0.335428] ACPI: bus type PCI registered
[ 0.335486] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.335612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.335692] PCI: not using MMCONFIG
[ 0.335748] PCI: Using configuration type 1 for base access
[ 0.336533] bio: create slab at 0
[ 0.336700] ACPI: Added _OSI(Module Device)
[ 0.336758] ACPI: Added _OSI(Processor Device)
[ 0.336815] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.336874] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.338547] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.375923] ACPI: SSDT 00000000bf7984f0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.376366] ACPI: Dynamic OEM Table Load:
[ 0.376498] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.376723] ACPI: SSDT 00000000bf79a310 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.377074] ACPI: Dynamic OEM Table Load:
[ 0.377205] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.377525] ACPI: Interpreter enabled
[ 0.377589] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.377752] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.377809] ACPI: Using IOAPIC for interrupt routing
[ 0.377885] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.378821] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.392756] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.392945] ACPI: No dock devices found.
[ 0.400793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.400859] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.400939] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.401291] PCI host bridge to bus 0000:00
[ 0.401349] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.401410] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.401471] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.401532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.401594] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.401656] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.401719] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.401789] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.401831] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.401900] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.401944] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.401989] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.402074] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.402118] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.402162] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.402247] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.402291] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.402335] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.402422] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.402463] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.402508] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.402598] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.402688] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.402777] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.402863] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.402949] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.402986] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.403068] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.403153] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.403190] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.403272] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.403357] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.403394] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.403476] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.403570] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.403588] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.403667] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.403714] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.403802] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.403815] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.403873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.403943] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.404002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.404049] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.404136] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.404195] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.404241] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.404328] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.404365] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.404447] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.404532] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.404568] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.404650] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.404737] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.404773] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.404854] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.404948] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.404967] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.405046] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.405092] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.405177] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.405256] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.405343] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.405412] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.405501] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.405565] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.405733] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.405749] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.405755] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.405762] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.405768] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.405775] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.405781] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.405821] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.405888] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.405901] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.405918] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.406028] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.406038] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.406044] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.406050] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.406057] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.406063] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.406070] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.406076] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.406104] pci 0000:01:00.0: PME# supported from D3hot
[ 0.411907] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.411972] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.411975] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.412025] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.412040] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.412110] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.419926] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.419996] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.420057] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.420066] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.420075] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.420084] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.420091] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.420097] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.420168] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.420177] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.427923] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.427988] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.427991] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.427995] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.428029] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.428134] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.428199] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.428278] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.428306] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.428318] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.428331] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.428343] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.428356] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.428368] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.428381] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.428430] pci 0000:05:00.0: PME# supported from D3hot
[ 0.435944] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.436012] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.436015] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.436070] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.436088] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.436096] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.436132] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.436164] pci 0000:07:01.0: supports D1 D2
[ 0.436166] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.436206] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.436222] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.436230] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.436292] pci 0000:07:02.0: supports D2
[ 0.436293] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.436350] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.436414] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.436417] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.436422] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.436423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.436425] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.436426] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.436428] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.436429] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.436867] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.437376] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.437882] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.438388] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.438896] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.439403] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.439912] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.440422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.440968] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.441105] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.441135] Found 1 acpi root devices
[ 0.441206] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.441284] vgaarb: loaded
[ 0.441339] vgaarb: bridge control possible 0000:03:00.0
[ 0.441428] PCI: Using ACPI for IRQ routing
[ 0.448584] PCI: Discovered peer bus ff
[ 0.448643] PCI: root bus ff: using default resources
[ 0.448644] PCI: Probing PCI hardware (bus ff)
[ 0.448673] PCI host bridge to bus 0000:ff
[ 0.448732] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.448794] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.448856] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.448937] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.448973] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.449003] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.449031] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.449060] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.449088] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.449117] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.449145] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.449173] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.449201] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.449230] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.449259] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.449287] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.449320] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.449348] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.449377] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.449405] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.449433] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.449461] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.449497] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.449501] PCI: pci_cache_line_size set to 64 bytes
[ 0.449574] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.449575] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.449663] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.449728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.449973] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.452252] Switched to clocksource hpet
[ 0.453573] pnp: PnP ACPI init
[ 0.453635] ACPI: bus type PNP registered
[ 0.453740] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.453804] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.453865] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.453928] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.453989] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.454052] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.454115] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.454151] pnp 00:01: [dma 4]
[ 0.454166] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.454191] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.454209] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.454229] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.454306] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.454369] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454544] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.454608] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.454669] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.454731] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.454792] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.454854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.454917] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.454979] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455043] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.455090] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.455143] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.455206] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455288] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.455351] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.455413] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455571] pnp 00:0b: [dma 0 disabled]
[ 0.455619] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.455660] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.455719] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.455783] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455942] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.456006] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.456069] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.456131] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.456194] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.456261] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.456360] pnp: PnP ACPI: found 15 devices
[ 0.456418] ACPI: bus type PNP unregistered
[ 0.463834] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.463837] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.463845] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.463860] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.463924] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.463926] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.463928] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.463931] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.463994] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.464071] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.464133] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.464193] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.464265] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.464331] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.464392] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.464458] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.464517] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.464580] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.464643] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.464722] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.464786] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.464846] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.464908] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.464972] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.465053] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.465130] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.465190] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.465253] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.465317] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.465396] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.465455] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.465518] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.465585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.465586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.465588] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.465589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.465591] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.465592] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.465594] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.465595] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.465597] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.465599] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.465600] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.465602] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.465603] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.465605] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.465606] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.465608] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.465609] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.465611] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.465612] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.465614] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.465615] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.465617] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.465618] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.465620] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.465621] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.465623] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.465626] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.465627] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.465707] NET: Registered protocol family 2
[ 0.466032] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.466546] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.466723] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.466797] TCP: reno registered
[ 0.466879] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.467043] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.467258] NET: Registered protocol family 1
[ 0.468833] pci 0000:03:00.0: Boot video device
[ 0.468846] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.468896] Unpacking initramfs...
[ 0.740554] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
[ 0.740650] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.740712] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.741015] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741079] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741144] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741209] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742235] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742300] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742364] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742428] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742524] microcode: Microcode Update Driver: v2.00, Peter Oruba
[ 0.742887] audit: initializing netlink socket (disabled)
[ 0.742953] type=2000 audit(1389901435.592:1): initialized
[ 0.757603] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.758432] VFS: Disk quotas dquot_6.5.2
[ 0.758518] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.758646] msgmni has been set to 32768
[ 0.758928] alg: No test for stdrng (krng)
[ 0.759007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.759119] io scheduler noop registered
[ 0.759177] io scheduler deadline registered
[ 0.759255] io scheduler cfq registered (default)
[ 0.759483] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.759665] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.759806] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 0.759869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.759939] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.760020] intel_idle: MWAIT substates: 0x1120
[ 0.760029] intel_idle: v0.4 model 0x1A
[ 0.760030] intel_idle: lapic_timer_reliable_states 0x2
[ 0.760189] GHES: HEST is not enabled!
[ 0.760288] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.783901] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.784298] Linux agpgart interface v0.103
[ 0.784458] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.784520] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.785077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.785211] mousedev: PS/2 mouse device common for all mice
[ 0.785300] rtc_cmos 00:02: RTC can wake from S4
[ 0.785459] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.785542] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.785626] AMD IOMMUv2 driver by Joerg Roedel
[ 0.785686] AMD IOMMUv2 functionality not available on this system
[ 0.785818] TCP: cubic registered
[ 0.787353] NET: Registered protocol family 10
[ 0.788078] mip6: Mobile IPv6
[ 0.788135] NET: Registered protocol family 17
[ 0.788194] mpls_gso: MPLS GSO support
[ 0.788591] registered taskstats version 1
[ 0.789850] rtc_cmos 00:02: setting system clock to 2014-01-16 19:43:56 UTC (1389901436)
[ 0.789945] PM: Hibernation image not present or could not be loaded.
[ 0.790847] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.790924] Write protecting the kernel read-only data: 8192k
[ 0.795913] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.797252] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.809128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.857903] systemd-udevd[95]: starting version 204
[ 0.872833] SCSI subsystem initialized
[ 0.873275] ACPI: bus type USB registered
[ 0.873358] usbcore: registered new interface driver usbfs
[ 0.873431] usbcore: registered new interface driver hub
[ 0.873686] usbcore: registered new device driver usb
[ 0.874038] libata version 3.00 loaded.
[ 0.874549] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.874619] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.874768] ahci 0000:00:1f.2: version 3.0
[ 0.874826] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
[ 0.874836] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
[ 0.874843] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.874851] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.874857] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.874863] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.874870] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.874877] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.874903] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
[ 0.874968] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.875009] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.875011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.875012] usb usb1: Product: xHCI Host Controller
[ 0.875013] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.875015] usb usb1: SerialNumber: 0000:02:00.0
[ 0.875113] hub 1-0:1.0: USB hub found
[ 0.875122] hub 1-0:1.0: 2 ports detected
[ 0.875210] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.875214] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.875628] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.875724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.876022] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.878403] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.878472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.878552] usb usb2: Product: xHCI Host Controller
[ 0.878614] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.878677] usb usb2: SerialNumber: 0000:02:00.0
[ 0.878852] hub 2-0:1.0: USB hub found
[ 0.878919] hub 2-0:1.0: 2 ports detected
[ 0.883308] ehci-pci: EHCI PCI platform driver
[ 0.888522] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.888664] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.888950] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003052000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.889033] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.912926] scsi0 : ahci
[ 0.913497] scsi1 : ahci
[ 0.913635] scsi2 : ahci
[ 0.913781] scsi3 : ahci
[ 0.913927] scsi4 : ahci
[ 0.914074] scsi5 : ahci
[ 0.914155] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
[ 0.914231] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
[ 0.914308] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
[ 0.914385] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
[ 0.914462] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
[ 0.914539] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
[ 0.914689] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
[ 0.914701] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 0.914781] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.914848] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.914961] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.915058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.915120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915197] usb usb3: Product: UHCI Host Controller
[ 0.915255] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.915315] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.915533] hub 3-0:1.0: USB hub found
[ 0.915598] hub 3-0:1.0: 2 ports detected
[ 0.915808] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.915870] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.915973] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.916063] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916125] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916201] usb usb4: Product: UHCI Host Controller
[ 0.916260] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.916320] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.916564] hub 4-0:1.0: USB hub found
[ 0.916628] hub 4-0:1.0: 2 ports detected
[ 0.916830] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.916893] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.916995] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.917085] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.917147] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.917224] usb usb5: Product: UHCI Host Controller
[ 0.917282] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.917342] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.917533] hub 5-0:1.0: USB hub found
[ 0.917598] hub 5-0:1.0: 2 ports detected
[ 0.917803] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.917865] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.917968] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.918059] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.918122] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.918198] usb usb6: Product: UHCI Host Controller
[ 0.918256] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.918316] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.918509] hub 6-0:1.0: USB hub found
[ 0.918574] hub 6-0:1.0: 2 ports detected
[ 0.918781] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.918843] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.918938] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.919028] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.919091] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.919167] usb usb7: Product: UHCI Host Controller
[ 0.919226] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.919286] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.919521] hub 7-0:1.0: USB hub found
[ 0.919587] hub 7-0:1.0: 2 ports detected
[ 0.919789] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.919852] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.919947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.920037] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921054] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921130] usb usb8: Product: UHCI Host Controller
[ 0.921188] usb usb8: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921249] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.921408] hub 8-0:1.0: USB hub found
[ 0.921471] hub 8-0:1.0: 2 ports detected
[ 0.921948] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.922014] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 9
[ 0.922106] ehci-pci 0000:00:1a.7: debug port 1
[ 0.926059] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.926065] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.928509] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.928594] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 0.929285] scsi6 : ahci
[ 0.929439] scsi7 : ahci
[ 0.929589] scsi8 : ahci
[ 0.929740] scsi9 : ahci
[ 0.929894] scsi10 : ahci
[ 0.930050] scsi11 : ahci
[ 0.930203] scsi12 : ahci
[ 0.930357] scsi13 : ahci
[ 0.930442] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
[ 0.930520] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
[ 0.930596] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
[ 0.930673] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
[ 0.930749] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
[ 0.930826] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
[ 0.930903] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
[ 0.930980] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
[ 0.931172] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.931252] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.931545] scsi14 : ahci
[ 0.931666] scsi15 : ahci
[ 0.931753] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 0.931831] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 0.936417] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.936550] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.936614] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.936690] usb usb9: Product: EHCI Host Controller
[ 0.936749] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.936809] usb usb9: SerialNumber: 0000:00:1a.7
[ 0.936967] hub 9-0:1.0: USB hub found
[ 0.937032] hub 9-0:1.0: 6 ports detected
[ 0.961290] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.961312] hub 3-0:1.0: USB hub found
[ 0.961318] hub 3-0:1.0: 2 ports detected
[ 0.984579] hub 4-0:1.0: USB hub found
[ 0.984644] hub 4-0:1.0: 2 ports detected
[ 1.008655] hub 5-0:1.0: USB hub found
[ 1.008719] hub 5-0:1.0: 2 ports detected
[ 1.009100] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.009164] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 1.010960] ehci-pci 0000:00:1d.7: debug port 1
[ 1.014920] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.014926] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 1.024573] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.024664] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.024731] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024807] usb usb10: Product: EHCI Host Controller
[ 1.024866] usb usb10: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 1.024927] usb usb10: SerialNumber: 0000:00:1d.7
[ 1.025223] hub 10-0:1.0: USB hub found
[ 1.025288] hub 10-0:1.0: 6 ports detected
[ 1.048618] hub 6-0:1.0: USB hub found
[ 1.048686] hub 6-0:1.0: 2 ports detected
[ 1.072616] hub 7-0:1.0: USB hub found
[ 1.072685] hub 7-0:1.0: 2 ports detected
[ 1.096632] hub 8-0:1.0: USB hub found
[ 1.096704] hub 8-0:1.0: 2 ports detected
[ 1.248708] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.248746] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.248789] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.248914] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.248991] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.249096] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.249169] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.249239] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.249523] ata14.00: configured for UDMA/66
[ 1.252598] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.252679] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.256664] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.404717] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.404802] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.404875] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.404948] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.405021] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.406100] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.406177] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.406251] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.406318] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.406390] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.406452] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.406519] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.406581] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.409065] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.409132] ata2.00: applying bridge limits
[ 1.409387] ata1.00: configured for UDMA/133
[ 1.409462] ata4.00: configured for UDMA/133
[ 1.409535] ata6.00: configured for UDMA/133
[ 1.409638] ata5.00: configured for UDMA/133
[ 1.409758] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.412266] ata2.00: configured for UDMA/33
[ 1.412633] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.413843] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.413905] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.414261] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.415240] ata3.00: configured for UDMA/133
[ 1.415390] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.415417] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.415490] sd 0:0:0:0: [sda] Write Protect is off
[ 1.415491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.415523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.415809] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.415916] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.415951] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.415952] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.415973] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.416245] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.416329] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.416407] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.416409] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.416440] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.416646] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.416759] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.416799] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.416800] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.416827] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.417102] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.417272] sd 5:0:0:0: [sde] Write Protect is off
[ 1.417331] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.417414] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.417415] sdc: sdc1 sdc2 sdc3
[ 1.417514] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.417676] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.418576] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.418668] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.418758] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.418846] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.418935] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.419028] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.419113] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.421889] sda: sda1 sda2 sda3
[ 1.422019] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.422099] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.422249] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.422280] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.429983] sdb: sdb1 sdb2 sdb3
[ 1.430782] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.431761] sdd: sdd1 sdd2 sdd3
[ 1.432367] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.442578] sde: sde1 sde2 sde3
[ 1.443252] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.460705] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.740715] tsc: Refined TSC clocksource calibration: 2806.361 MHz
[ 1.743010] random: nonblocking pool is initialized
[ 1.836374] md: md127 stopped.
[ 1.836717] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 1.840810] md: bind
[ 1.841257] md: bind
[ 1.841670] md: bind
[ 1.841899] md: bind
[ 1.846963] md: bind
[ 1.848319] md: raid10 personality registered for level 10
[ 1.848729] md/raid10:md127: active with 4 out of 4 devices
[ 1.848930] created bitmap (466 pages) for device md127
[ 1.862800] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 1.891778] md127: detected capacity change from 0 to 1999877701632
[ 1.891864] RAID10 conf printout:
[ 1.891867] --- wd:4 rd:4
[ 1.891869] disk 0, wo:0, o:1, dev:sda3
[ 1.891875] disk 1, wo:0, o:1, dev:sdc3
[ 1.891876] disk 2, wo:0, o:1, dev:sdb3
[ 1.891877] disk 3, wo:0, o:1, dev:sdd3
[ 1.893251] md127: unknown partition table
[ 1.928165] device-mapper: uevent: version 1.0.3
[ 1.928285] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 1.970135] bio: create slab at 1
[ 2.014894] usb 8-1: New USB device found, idVendor=046d, idProduct=c01e
[ 2.014963] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.015030] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 2.015088] usb 8-1: Manufacturer: Logitech
[ 2.020000] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.035997] usbcore: registered new interface driver usbhid
[ 2.036059] usbhid: USB HID core driver
[ 2.039750] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 2.039966] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.069935] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.256949] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.567106] usb 8-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.567175] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.567242] usb 8-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.567304] usb 8-2: Manufacturer: American Power Conversion
[ 2.567364] usb 8-2: SerialNumber: JB0539032829
[ 2.741406] Switched to clocksource tsc
[ 3.639622] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 12.992509] systemd-udevd[605]: starting version 204
[ 13.526865] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 13.527040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.527122] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 13.527280] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.527360] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 13.527517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.527597] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.543090] EDAC MC: Ver: 3.0.0
[ 13.550602] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 13.550710] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 13.550798] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 13.565571] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 13.565733] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.587366] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 13.587450] ACPI: Power Button [PWRB]
[ 13.587551] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 13.587630] ACPI: Power Button [PWRF]
[ 13.589599] [drm] Initialized drm 1.1.0 20060810
[ 13.701591] wmi: Mapper loaded
[ 13.726166] systemd-udevd[651]: renamed network interface eth0 to lan
[ 13.754012] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 13.760019] ATK0110 ATK0110:00: Overriding interface detection
[ 13.820541] iTCO_vendor_support: vendor-support=0
[ 13.845409] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 13.847237] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 13.847381] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 13.860321] nouveau: unknown parameter 'perflvl_wr' ignored
[ 13.860587] MXM: GUID detected in BIOS
[ 13.860876] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 13.860938] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 13.860999] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 13.861940] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 13.927768] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 13.927832] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 13.927989] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 13.928050] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 13.928328] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
[ 13.928335] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 13.930142] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061e631800] reclocking of this ram type unsupported
[ 13.930260] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 13.930349] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 13.930443] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 13.960704] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 13.960802] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 13.960896] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 13.961013] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 13.961105] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 13.961216] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 13.961474] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 13.965856] md: bind
[ 13.971577] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 13.971671] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 13.971762] [TTM] Initializing pool allocator
[ 13.971854] [TTM] Initializing DMA pool allocator
[ 13.971953] nouveau [ DRM] VRAM: 512 MiB
[ 13.972043] nouveau [ DRM] GART: 1048576 MiB
[ 13.972132] nouveau [ DRM] TMDS table version 2.0
[ 13.972221] nouveau [ DRM] DCB version 4.0
[ 13.972308] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 13.972398] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 13.972488] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 13.972582] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 13.972674] nouveau [ DRM] DCB conn 00: 00001030
[ 13.972826] nouveau [ DRM] DCB conn 01: 00002161
[ 13.972977] nouveau [ DRM] DCB conn 02: 00000200
[ 13.974024] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.974114] [drm] No driver support for vblank timestamp query.
[ 13.988791] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 14.024814] md: bind
[ 14.046952] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.073508] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
[ 14.079696] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061d8c2800
[ 14.079890] fbcon: nouveaufb (fb0) is primary device
[ 14.098104] md: bind
[ 14.127062] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.127111] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.127151] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.127190] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.127231] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.127270] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.127309] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.127349] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 14.150927] md: bind
[ 14.157534] Console: switching to colour frame buffer device 128x48
[ 14.158695] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 14.158708] nouveau 0000:03:00.0: registered panic notifier
[ 14.158722] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 14.158875] hda_intel: Disabling MSI
[ 14.158905] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 14.190837] md: bind
[ 14.215740] md: raid1 personality registered for level 1
[ 14.216101] md/raid1:md0: active with 5 out of 5 mirrors
[ 14.218657] created bitmap (16 pages) for device md0
[ 14.219260] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 14.231555] md0: detected capacity change from 0 to 131465216
[ 14.231664] RAID1 conf printout:
[ 14.231668] --- wd:5 rd:5
[ 14.231671] disk 0, wo:0, o:1, dev:sda1
[ 14.231673] disk 1, wo:0, o:1, dev:sdc1
[ 14.231675] disk 2, wo:0, o:1, dev:sdb1
[ 14.231677] disk 3, wo:0, o:1, dev:sdd1
[ 14.231679] disk 4, wo:0, o:1, dev:sde1
[ 14.234020] md0: unknown partition table
[ 14.965054] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 14.965520] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 14.965964] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 14.966411] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 15.496666] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 15.905182] RAID10 conf printout:
[ 15.905188] --- wd:4 rd:4
[ 15.905193] disk 0, wo:0, o:1, dev:sda3
[ 15.905196] disk 1, wo:0, o:1, dev:sdc3
[ 15.905199] disk 2, wo:0, o:1, dev:sdb3
[ 15.905202] disk 3, wo:0, o:1, dev:sdd3
[ 16.033206] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 16.465027] loop: module loaded
[ 17.806651] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 18.813884] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 18.955306] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 19.063331] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 19.072942] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 19.140589] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.164405] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.195524] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.208240] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.221636] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.223272] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.250690] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.262259] FAT-fs (sdd2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 20.136642] Bridge firewalling registered
[ 20.139914] device lan entered promiscuous mode
[ 20.155416] r8169 0000:07:01.0 lan: link down
[ 20.155475] r8169 0000:07:01.0 lan: link down
[ 20.156173] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 20.159615] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 22.966015] r8169 0000:07:01.0 lan: link up
[ 22.966286] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 22.969072] br0: port 1(lan) entered forwarding state
[ 22.970674] br0: port 1(lan) entered forwarding state
[ 22.972315] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 23.802549] RPC: Registered named UNIX socket transport module.
[ 23.802703] RPC: Registered udp transport module.
[ 23.802988] RPC: Registered tcp transport module.
[ 23.803432] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 23.812593] FS-Cache: Loaded
[ 23.826837] FS-Cache: Netfs 'nfs' registered for caching
[ 23.986609] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 24.972021] br0: port 1(lan) entered forwarding state
[ 191.606562] tun: Universal TUN/TAP device driver, 1.6
[ 191.606773] tun: (C) 1999-2004 Max Krasnyansky
[ 201.333408] CacheFiles: Loaded
[ 201.919717] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 201.964146] NFSD: starting 90-second grace period (net ffffffff81885e00)
[ 202.731250] lp: driver loaded but no devices found
[ 202.733483] ppdev: user-space parallel port driver
[ 205.260548] FS-Cache: Cache "mycache" added (type cachefiles)
[ 205.260554] CacheFiles: File cache on dm-0 registered
[ 209.909484] Ebtables v2.0 registered
[ 209.951359] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 209.969159] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 216.478120] postgres (6026): /proc/6026/oom_adj is deprecated, please use /proc/6026/oom_score_adj instead.
[ 223.000968] watchdog watchdog0: nowayout prevents watchdog being stopped!
[ 223.000972] watchdog watchdog0: watchdog did not stop!
[ 236.339128] type=1006 audit(1389901671.250:2): pid=5071 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 431.281434] do_IRQ: 0.196 No irq handler for vector (irq -1)
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52D83BF9.7040502-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-17 14:08 ` Neil Horman
[not found] ` <20140117140831.GA19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Neil Horman @ 2014-01-17 14:08 UTC (permalink / raw)
To: Anthony DeRobertis; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Thu, Jan 16, 2014 at 03:07:21PM -0500, Anthony DeRobertis wrote:
> On 01/16/2014 01:21 PM, Neil Horman wrote:
> >Yes, What I would like to see is your backout patch removed, and the the
> >following tests preformed:
> >
> >1) VT-D off in bios
> >2) VT-D on in bios and nointremap specified on the command line
> >3) VT-D on in bios and nointremap _not_ specified on the command line
> >
> >If I could see the boot logs for all of those that would be helpful. What would
> >be particularly helpful is to know if test (2) results in the problem
> >reproducing. If it does that suggests our ability to disable interrupt
> >remapping in the kernel is somehow ineffective on your system.
>
> (2) results in the problem reproducing. To be clear, all three tests
> have been done without my patch applied. They were built from:
>
> master a6da83f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
>
>
> To get the dmesg for (1) and (3), I booted into single user, and
> didn't go any further. (2) I first booted to single user, but then
> continued on—that's why you'll see the much later timestamp loading
> tun, etc.
>
So, something just doesn't ring true here. In test 2, you specified nointremap
on the kernel command line, which is good. But specifying that on the kernel
command line sets disable_irq_remap=1. In intel_irq_remapping_supported, the
code reads as follows:
static int __init intel_irq_remapping_supported(void)
{
struct dmar_drhd_unit *drhd;
if (disable_irq_remap)
return 0;
if (irq_remap_broken) {
printk(KERN_WARNING
"This system BIOS has enabled interrupt remapping\n"
"on a chipset that contains an erratum making that\n"
"feature unstable. To maintain system stability\n"
"interrupt remapping is being disabled. Please\n"
"contact your BIOS vendor for an update\n");
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
disable_irq_remap = 1;
return 0;
}
...
If disable_irq_remap had been set by nointremap, that function should have
returned immediately, but in test 2 you got the "This system BIOS.." warning,
indicating that disable_irq_remap was not set. It seems to me something is
wrong with your kernel build. I'd suggest confirming this (mis)-behavior by
adding a printk to the function setup_nointremap, indicating the value
disable_irq_remap is getting set to. I would also add a printk to the start of
intel_irq_remapping_supported to print out the value of disable_irq_remap again,
to ensure it hasn't changed. That should give us some additional clues as to
whats going on.
Regards
Neil
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140117140831.GA19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
@ 2014-01-17 18:52 ` Anthony DeRobertis
[not found] ` <52D97BFB.1020106-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-17 18:52 UTC (permalink / raw)
To: Neil Horman; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 1179 bytes --]
On 01/17/2014 09:08 AM, Neil Horman wrote:
> If disable_irq_remap had been set by nointremap, that function should
> have returned immediately, but in test 2 you got the "This system
> BIOS.." warning, indicating that disable_irq_remap was not set.
No, that's not right...
anthony@Zia:/tmp/iommu$ ls -l
total 216
-rw-r--r-- 1 root root 71141 Jan 16 14:40 no-patch,vt-d=off
-rw-r--r-- 1 root root 71449 Jan 16 14:37 no-patch,vt-d=on
-rw-r--r-- 1 root root 72746 Jan 16 14:54 no-patch,vt-d=on,nointremap,with-error
anthony@Zia:/tmp/iommu$ grep 'system BIOS' *
no-patch,vt-d=on:[ 0.066268] This system BIOS has enabled interrupt remapping
So, when I look at my copies of the files, its as expected.
I put the test cases in the order 1, 3, 2 when pasting into the
email—the labels are right, but that order was rather stupid on my part.
But you must be looking at the right one, because you see the kernel
option, so I'm confused.
I have no idea what the mailing list will do with this attachment, and I
apologize in advance if you don't like binary attachments, but here they
are as a .tgz. Should at least take care of this confusion.
[-- Attachment #2: iommu.tgz --]
[-- Type: application/x-gtar-compressed, Size: 55094 bytes --]
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52D97BFB.1020106-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-17 20:27 ` Neil Horman
[not found] ` <20140117202712.GC19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Neil Horman @ 2014-01-17 20:27 UTC (permalink / raw)
To: Anthony DeRobertis; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Fri, Jan 17, 2014 at 01:52:43PM -0500, Anthony DeRobertis wrote:
> On 01/17/2014 09:08 AM, Neil Horman wrote:
>
> >If disable_irq_remap had been set by nointremap, that function
> >should have returned immediately, but in test 2 you got the "This
> >system BIOS.." warning, indicating that disable_irq_remap was not
> >set.
>
> No, that's not right...
>
> anthony@Zia:/tmp/iommu$ ls -l
> total 216
> -rw-r--r-- 1 root root 71141 Jan 16 14:40 no-patch,vt-d=off
> -rw-r--r-- 1 root root 71449 Jan 16 14:37 no-patch,vt-d=on
> -rw-r--r-- 1 root root 72746 Jan 16 14:54 no-patch,vt-d=on,nointremap,with-error
> anthony@Zia:/tmp/iommu$ grep 'system BIOS' *
> no-patch,vt-d=on:[ 0.066268] This system BIOS has enabled interrupt remapping
>
>
> So, when I look at my copies of the files, its as expected.
>
> I put the test cases in the order 1, 3, 2 when pasting into the
> email—the labels are right, but that order was rather stupid on my
> part. But you must be looking at the right one, because you see the
> kernel option, so I'm confused.
>
> I have no idea what the mailing list will do with this attachment,
> and I apologize in advance if you don't like binary attachments, but
> here they are as a .tgz. Should at least take care of this
> confusion.
Ok, thats a bit more clear, thank you. The order of tests did confuse me
apparently.
So that clarifies the results somewhat. nointremap does in fact do a software
disable of irq remapping, just like the pci qurik does. Thats good. Whats less
good is that you still get the irq vector error with nointremap specified.
Whiel that supports the assertion that there is nothing wrong with the way the
pci quirk disables irq remapping, it does suggest that the listed symptom (the
no vector for irq (-1) error) is being triggered by some other root cause. And
I am unfortunately unsure of what that might be. I would suggest you look
through that errata sheet that I referenced in the initial commit to fix the
remapping problem, to see if there are other chip errata who's symptoms lead to
irq drainage failures. We may need to add another quirk to this chipset.
Regards
Neil
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140117202712.GC19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
@ 2014-01-17 22:33 ` Anthony DeRobertis
[not found] ` <52D9AFBB.5080203-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-17 22:33 UTC (permalink / raw)
To: Neil Horman; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/17/2014 03:27 PM, Neil Horman wrote:
> I would suggest you look through that errata sheet that I referenced
> in the initial commit to fix the remapping problem, to see if there
> are other chip errata who's symptoms lead to irq drainage failures. We
> may need to add another quirk to this chipset. Regards Neil
OK, I started looking through the errata sheet. Let me stress I don't
normally read these things, so...
But the first thing I notice is that I tried to figure out what stepping
I have (in the Identification section), it says should look for vendor
ID 8086h and device ID 3403 or 3406. I have neither. I have 3405.
Which, appears to make sense, because this is not a Intel 5500/5520
chipset, its an Intel X58 chipset. That seems to have a different
specification update, despite being from the same family:
http://www.intel.com/content/dam/doc/specification-update/x58-express-specification-update.pdf
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13)
so I have a X58, Stepping B3. Appears to be issue 69 instead, and is
supposed to happen on B3. Added back in July '09. Odd that Asus hasn't
yet heard... Especially since they didn't release the board until 2010.
[Still trying to make my way through those documents.]
PS: The linked bug report
https://bugzilla.redhat.com/show_bug.cgi?id=887006 is apparently secret :-(
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52D9AFBB.5080203-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-20 12:26 ` Neil Horman
[not found] ` <20140120122630.GB22690-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Neil Horman @ 2014-01-20 12:26 UTC (permalink / raw)
To: Anthony DeRobertis; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Fri, Jan 17, 2014 at 05:33:31PM -0500, Anthony DeRobertis wrote:
> On 01/17/2014 03:27 PM, Neil Horman wrote:
>
> >I would suggest you look through that errata sheet that I
> >referenced in the initial commit to fix the remapping problem, to
> >see if there are other chip errata who's symptoms lead to irq
> >drainage failures. We may need to add another quirk to this
> >chipset. Regards Neil
>
> OK, I started looking through the errata sheet. Let me stress I
> don't normally read these things, so...
>
> But the first thing I notice is that I tried to figure out what
> stepping I have (in the Identification section), it says should look
> for vendor ID 8086h and device ID 3403 or 3406. I have neither. I
> have 3405.
>
> Which, appears to make sense, because this is not a Intel 5500/5520
> chipset, its an Intel X58 chipset. That seems to have a different
> specification update, despite being from the same family:
>
> http://www.intel.com/content/dam/doc/specification-update/x58-express-specification-update.pdf
>
> 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13)
>
> so I have a X58, Stepping B3. Appears to be issue 69 instead, and is
> supposed to happen on B3. Added back in July '09. Odd that Asus
> hasn't yet heard... Especially since they didn't release the board
> until 2010.
>
Right, the X58 variant of the chipset should be covered by
803075dba31c17af110e1d9a915fe7262165b213. And it is, because we still get the
remapping warning when you boot up. Whats odd is that you're still seeing the
issue, so there must be something else about your chipset that acting
differently than other X58's
> [Still trying to make my way through those documents.]
>
> PS: The linked bug report
> https://bugzilla.redhat.com/show_bug.cgi?id=887006 is apparently
> secret :-(
>
That bug is mine, it just tracks the resolution of this problem on the 55XX
chipsets in RHEL6. You know everything there is to know in that bug :)
Neil
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140120122630.GB22690-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
@ 2014-01-22 16:29 ` Anthony DeRobertis
[not found] ` <52DFF1FE.2080805-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-22 16:29 UTC (permalink / raw)
To: Neil Horman; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/2014 07:26 AM, Neil Horman wrote:
> Right, the X58 variant of the chipset should be covered by
> 803075dba31c17af110e1d9a915fe7262165b213. And it is, because we still get the
> remapping warning when you boot up. Whats odd is that you're still seeing the
> issue, so there must be something else about your chipset that acting
> differently than other X58's
Indeed. X58 isn't exactly a weird chipset, I can't be the only person
with it...
I've gone back to booting with my patch (the one which removes/disables
the quirk). and it continues to work fine. As long as I ignore Intel's
erratum.
I'm not sure where to look next. Going to throw some random printk's in,
but I stress random—I'm not familiar with the code or the hardware.
Suggestions of what to try next appreciated.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52DFF1FE.2080805-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-22 18:17 ` Neil Horman
[not found] ` <20140122181707.GA14646-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Neil Horman @ 2014-01-22 18:17 UTC (permalink / raw)
To: Anthony DeRobertis; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Jan 22, 2014 at 11:29:50AM -0500, Anthony DeRobertis wrote:
> On 01/20/2014 07:26 AM, Neil Horman wrote:
> >Right, the X58 variant of the chipset should be covered by
> >803075dba31c17af110e1d9a915fe7262165b213. And it is, because we still get the
> >remapping warning when you boot up. Whats odd is that you're still seeing the
> >issue, so there must be something else about your chipset that acting
> >differently than other X58's
>
> Indeed. X58 isn't exactly a weird chipset, I can't be the only
> person with it...
>
You're by no means the only person with it, but you are the only person that I
know of thats complaining of the non-draining irq issue after the quirk disables
interrupt remapping, which leads me to think that there is something about your
x58 chipset that differs from everyone elses.
> I've gone back to booting with my patch (the one which
> removes/disables the quirk). and it continues to work fine. As long
> as I ignore Intel's erratum.
>
which makes no sense, save for the possibility that you have encountered a
different problem that exhibits the same symptom as the irq remapping issue.
> I'm not sure where to look next. Going to throw some random printk's
> in, but I stress random—I'm not familiar with the code or the
> hardware. Suggestions of what to try next appreciated.
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140122181707.GA14646-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
@ 2014-01-22 19:41 ` Anthony DeRobertis
[not found] ` <52E01ED2.4080604-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-22 19:41 UTC (permalink / raw)
To: Neil Horman; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
I was looking through those files a bit, and notice there is a
iommu_disable_irq_remapping. I added some printk's to it, and it isn't
being called when the BIOS workaround is hit.
From the code, I gather that it should be disabled at boot, and the
disable_irq_remap flag works by just pretending its not supported, so it
never gets enabled.
However, I see in the enable path (intel_enable_irq_remapping) there is
this:
/*
* Disable intr remapping and queued invalidation, if already
* enabled prior to OS handover.
*/
iommu_disable_irq_remapping(iommu);
It sounds like someone found a BIOS before that hands off to Linux with
it already enabled.
So, I added a call to disable_irq_remapping, but it turns out that this
BIOS doesn't do that. So doesn't help here.
Also, I notice that iommu_disable_irq_remapping looks suspicious as its
weird that GSTS is being read with both readl and dmar_readq. I think
readl is correct, as I think the Intel spec says its a 32-bit field.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52E01ED2.4080604-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-23 12:37 ` Neil Horman
[not found] ` <20140123123743.GA26800-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Neil Horman @ 2014-01-23 12:37 UTC (permalink / raw)
To: Anthony DeRobertis; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Jan 22, 2014 at 02:41:06PM -0500, Anthony DeRobertis wrote:
> I was looking through those files a bit, and notice there is a
> iommu_disable_irq_remapping. I added some printk's to it, and it
> isn't being called when the BIOS workaround is hit.
>
> From the code, I gather that it should be disabled at boot, and the
> disable_irq_remap flag works by just pretending its not supported,
> so it never gets enabled.
>
> However, I see in the enable path (intel_enable_irq_remapping) there
> is this:
>
> /*
> * Disable intr remapping and queued invalidation, if already
> * enabled prior to OS handover.
> */
> iommu_disable_irq_remapping(iommu);
>
> It sounds like someone found a BIOS before that hands off to Linux
> with it already enabled.
>
> So, I added a call to disable_irq_remapping, but it turns out that
> this BIOS doesn't do that. So doesn't help here.
>
> Also, I notice that iommu_disable_irq_remapping looks suspicious as
> its weird that GSTS is being read with both readl and dmar_readq. I
> think readl is correct, as I think the Intel spec says its a 32-bit
> field.
>
Hmm, you may be right. IRQ remapping is supposed to be strictly opt-in, but if
you have a BIOS that did it for you (that setting in bios is just supposed to
set the supported bit for irq remapping in the iommu capabilities register, not
actually enable it), then that would explain your situation.
Can you try this patch on top of a vanilla kernel and tell me if it solves your
problem?
Thanks!
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index bab10b1..19f41ee 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -533,6 +533,8 @@ static int __init intel_irq_remapping_supported(void)
"contact your BIOS vendor for an update\n");
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
disable_irq_remap = 1;
+ /* In case BIOS already enabled irq remapping */
+ disable_irq_remapping();
return 0;
}
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <20140123123743.GA26800-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
@ 2014-01-23 19:24 ` Anthony DeRobertis
[not found] ` <52E16C56.9000709-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
0 siblings, 1 reply; 18+ messages in thread
From: Anthony DeRobertis @ 2014-01-23 19:24 UTC (permalink / raw)
To: Neil Horman; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/23/2014 07:37 AM, Neil Horman wrote:
> diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> index bab10b1..19f41ee 100644
> --- a/drivers/iommu/intel_irq_remapping.c
> +++ b/drivers/iommu/intel_irq_remapping.c
> @@ -533,6 +533,8 @@ static int __init intel_irq_remapping_supported(void)
> "contact your BIOS vendor for an update\n");
> add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> disable_irq_remap = 1;
> + /* In case BIOS already enabled irq remapping */
> + disable_irq_remapping();
> return 0;
> }
I already tried that, well, similar (you need to declare
disable_irq_remapping above that or it won't compile). I also added in
some printks, to see what it is doing:
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index bab10b1..8a502d7 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -496,8 +496,13 @@ static void iommu_disable_irq_remapping(struct intel_iommu *iommu)
raw_spin_lock_irqsave(&iommu->register_lock, flags);
sts = dmar_readq(iommu->reg + DMAR_GSTS_REG);
- if (!(sts & DMA_GSTS_IRES))
+ if (!(sts & DMA_GSTS_IRES)) {
+ printk(KERN_WARNING
+ "Not disabling interrupt remapping, was not enabled.\n");
goto end;
+ } else {
+ printk(KERN_INFO "Disabling interrupt remapping.\n");
+ }
iommu->gcmd &= ~DMA_GCMD_IRE;
writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
@@ -518,6 +523,8 @@ static int __init dmar_x2apic_optout(void)
return dmar->flags & DMAR_X2APIC_OPT_OUT;
}
+static void disable_irq_remapping(void);
+
static int __init intel_irq_remapping_supported(void)
{
struct dmar_drhd_unit *drhd;
@@ -533,6 +540,7 @@ static int __init intel_irq_remapping_supported(void)
"contact your BIOS vendor for an update\n");
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
disable_irq_remap = 1;
+ disable_irq_remapping();
return 0;
}
The result. Note this is two boots, I changed to printk messages to
something more understandable and rebooted to make sure there were no
brown paper bag bugs. So the do_IRQ bugs logs are the first boot, the
rest is the second boot:
[ 0.063923] dmar: ATSR flags: 0x0
[ 0.064075] This system BIOS has enabled interrupt remapping
[ 0.064075] on a chipset that contains an erratum making that
[ 0.064075] feature unstable. To maintain system stability
[ 0.064075] interrupt remapping is being disabled. Please
[ 0.064075] contact your BIOS vendor for an update
[ 0.064226] Not disabling interrupt remapping, was not enabled.
[ 0.064287] Not disabling interrupt remapping, was not enabled.
[ 0.064408] Switched APIC routing to physical flat.
anthony@Zia:~$ dmesg | grep do_IRQ # this is from the first boot
[ 2713.768956] do_IRQ: 40 callbacks suppressed
[ 2713.768963] do_IRQ: 0.132 No irq handler for vector (irq -1)
[ 3914.191481] do_IRQ: 3.219 No irq handler for vector (irq -1)
[12336.482217] do_IRQ: 3.106 No irq handler for vector (irq -1)
[19669.277859] do_IRQ: 2.136 No irq handler for vector (irq -1)
[31304.932672] do_IRQ: 2.204 No irq handler for vector (irq -1)
[35867.281432] do_IRQ: 2.135 No irq handler for vector (irq -1)
[43867.266257] do_IRQ: 1.174 No irq handler for vector (irq -1)
[50097.592403] do_IRQ: 3.81 No irq handler for vector (irq -1)
[55498.847866] do_IRQ: 0.92 No irq handler for vector (irq -1)
[57560.923165] do_IRQ: 0.199 No irq handler for vector (irq -1)
[57650.204418] do_IRQ: 0.120 No irq handler for vector (irq -1)
[72835.450862] do_IRQ: 0.163 No irq handler for vector (irq -1)
[76884.819496] do_IRQ: 2.68 No irq handler for vector (irq -1)
[77687.282915] do_IRQ: 2.216 No irq handler for vector (irq -1)
[77885.355992] do_IRQ: 2.185 No irq handler for vector (irq -1)
[78615.309285] do_IRQ: 12 callbacks suppressed
[78615.309291] do_IRQ: 3.45 No irq handler for vector (irq -1)
[78735.392357] do_IRQ: 6 callbacks suppressed
[78735.392362] do_IRQ: 2.173 No irq handler for vector (irq -1)
[79785.646442] do_IRQ: 6 callbacks suppressed
[79785.646449] do_IRQ: 1.53 No irq handler for vector (irq -1)
[79965.718447] do_IRQ: 8 callbacks suppressed
[79965.718453] do_IRQ: 0.150 No irq handler for vector (irq -1)
PS: Sent Asus a support request, to see if they have anything to say
about what the BIOS is doing with that erratum. Will let you know if
they respond with anything useful, I mostly expect "we don't support
Linux".
https://vip.asus.com/VIP2/Services/MailDetail/WTM20140124024244911 ...
no idea if that link works for anyone but me.
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
[not found] ` <52E16C56.9000709-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
@ 2014-01-23 21:51 ` Neil Horman
0 siblings, 0 replies; 18+ messages in thread
From: Neil Horman @ 2014-01-23 21:51 UTC (permalink / raw)
To: Anthony DeRobertis, '
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Thu, Jan 23, 2014 at 02:24:06PM -0500, Anthony DeRobertis wrote:
> On 01/23/2014 07:37 AM, Neil Horman wrote:
> >diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> >index bab10b1..19f41ee 100644
> >--- a/drivers/iommu/intel_irq_remapping.c
> >+++ b/drivers/iommu/intel_irq_remapping.c
> >@@ -533,6 +533,8 @@ static int __init intel_irq_remapping_supported(void)
> > "contact your BIOS vendor for an update\n");
> > add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> > disable_irq_remap = 1;
> >+ /* In case BIOS already enabled irq remapping */
> >+ disable_irq_remapping();
> > return 0;
> > }
>
> I already tried that, well, similar (you need to declare
> disable_irq_remapping above that or it won't compile). I also added
> in some printks, to see what it is doing:
>
> diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
> index bab10b1..8a502d7 100644
> --- a/drivers/iommu/intel_irq_remapping.c
> +++ b/drivers/iommu/intel_irq_remapping.c
> @@ -496,8 +496,13 @@ static void iommu_disable_irq_remapping(struct intel_iommu *iommu)
> raw_spin_lock_irqsave(&iommu->register_lock, flags);
> sts = dmar_readq(iommu->reg + DMAR_GSTS_REG);
> - if (!(sts & DMA_GSTS_IRES))
> + if (!(sts & DMA_GSTS_IRES)) {
> + printk(KERN_WARNING
> + "Not disabling interrupt remapping, was not enabled.\n");
> goto end;
> + } else {
> + printk(KERN_INFO "Disabling interrupt remapping.\n");
> + }
> iommu->gcmd &= ~DMA_GCMD_IRE;
> writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG);
> @@ -518,6 +523,8 @@ static int __init dmar_x2apic_optout(void)
> return dmar->flags & DMAR_X2APIC_OPT_OUT;
> }
> +static void disable_irq_remapping(void);
> +
> static int __init intel_irq_remapping_supported(void)
> {
> struct dmar_drhd_unit *drhd;
> @@ -533,6 +540,7 @@ static int __init intel_irq_remapping_supported(void)
> "contact your BIOS vendor for an update\n");
> add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
> disable_irq_remap = 1;
> + disable_irq_remapping();
> return 0;
> }
>
>
> The result. Note this is two boots, I changed to printk messages to
> something more understandable and rebooted to make sure there were
> no brown paper bag bugs. So the do_IRQ bugs logs are the first boot,
> the rest is the second boot:
>
> [ 0.063923] dmar: ATSR flags: 0x0
> [ 0.064075] This system BIOS has enabled interrupt remapping
> [ 0.064075] on a chipset that contains an erratum making that
> [ 0.064075] feature unstable. To maintain system stability
> [ 0.064075] interrupt remapping is being disabled. Please
> [ 0.064075] contact your BIOS vendor for an update
> [ 0.064226] Not disabling interrupt remapping, was not enabled.
> [ 0.064287] Not disabling interrupt remapping, was not enabled.
> [ 0.064408] Switched APIC routing to physical flat.
>
>
> anthony@Zia:~$ dmesg | grep do_IRQ # this is from the first boot
> [ 2713.768956] do_IRQ: 40 callbacks suppressed
> [ 2713.768963] do_IRQ: 0.132 No irq handler for vector (irq -1)
> [ 3914.191481] do_IRQ: 3.219 No irq handler for vector (irq -1)
> [12336.482217] do_IRQ: 3.106 No irq handler for vector (irq -1)
> [19669.277859] do_IRQ: 2.136 No irq handler for vector (irq -1)
> [31304.932672] do_IRQ: 2.204 No irq handler for vector (irq -1)
> [35867.281432] do_IRQ: 2.135 No irq handler for vector (irq -1)
> [43867.266257] do_IRQ: 1.174 No irq handler for vector (irq -1)
> [50097.592403] do_IRQ: 3.81 No irq handler for vector (irq -1)
> [55498.847866] do_IRQ: 0.92 No irq handler for vector (irq -1)
> [57560.923165] do_IRQ: 0.199 No irq handler for vector (irq -1)
> [57650.204418] do_IRQ: 0.120 No irq handler for vector (irq -1)
> [72835.450862] do_IRQ: 0.163 No irq handler for vector (irq -1)
> [76884.819496] do_IRQ: 2.68 No irq handler for vector (irq -1)
> [77687.282915] do_IRQ: 2.216 No irq handler for vector (irq -1)
> [77885.355992] do_IRQ: 2.185 No irq handler for vector (irq -1)
> [78615.309285] do_IRQ: 12 callbacks suppressed
> [78615.309291] do_IRQ: 3.45 No irq handler for vector (irq -1)
> [78735.392357] do_IRQ: 6 callbacks suppressed
> [78735.392362] do_IRQ: 2.173 No irq handler for vector (irq -1)
> [79785.646442] do_IRQ: 6 callbacks suppressed
> [79785.646449] do_IRQ: 1.53 No irq handler for vector (irq -1)
> [79965.718447] do_IRQ: 8 callbacks suppressed
> [79965.718453] do_IRQ: 0.150 No irq handler for vector (irq -1)
>
> PS: Sent Asus a support request, to see if they have anything to say
> about what the BIOS is doing with that erratum. Will let you know if
> they respond with anything useful, I mostly expect "we don't support
> Linux".
Probably, unfortunately this puts us back at square 1. The OS sees irq
remapping as disabled, so theres nothing for the OS to do here. So either the
BIOS is lying to the OS, or the symptom you see here is the result of some other
problem, but I couldn't tell you what.
Neil
> https://vip.asus.com/VIP2/Services/MailDetail/WTM20140124024244911
> ... no idea if that link works for anyone but me.
>
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2014-01-23 21:51 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-14 17:41 PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1) Anthony DeRobertis
[not found] ` <52D576E3.8050006-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-16 4:03 ` Alex Williamson
[not found] ` <1389844985.8705.45.camel-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>
2014-01-16 12:16 ` Neil Horman
[not found] ` <20140116121617.GA9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-16 17:08 ` Anthony DeRobertis
[not found] ` <52D8120D.7090606-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-16 18:21 ` Neil Horman
[not found] ` <20140116182134.GC9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-16 20:07 ` Anthony DeRobertis
[not found] ` <52D83BF9.7040502-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-17 14:08 ` Neil Horman
[not found] ` <20140117140831.GA19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-17 18:52 ` Anthony DeRobertis
[not found] ` <52D97BFB.1020106-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-17 20:27 ` Neil Horman
[not found] ` <20140117202712.GC19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-17 22:33 ` Anthony DeRobertis
[not found] ` <52D9AFBB.5080203-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-20 12:26 ` Neil Horman
[not found] ` <20140120122630.GB22690-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-22 16:29 ` Anthony DeRobertis
[not found] ` <52DFF1FE.2080805-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-22 18:17 ` Neil Horman
[not found] ` <20140122181707.GA14646-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-22 19:41 ` Anthony DeRobertis
[not found] ` <52E01ED2.4080604-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-23 12:37 ` Neil Horman
[not found] ` <20140123123743.GA26800-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-23 19:24 ` Anthony DeRobertis
[not found] ` <52E16C56.9000709-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-23 21:51 ` Neil Horman
2014-01-16 17:17 ` Anthony DeRobertis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.