From: "David Lanzendörfer" <david.lanzendoerfer@o2s.ch>
To: devicetree@vger.kernel.org,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>,
"Mike Turquette" <mturquette@linaro.org>,
"Simon Baatz" <gmbnomis@gmail.com>,
"Hans de Goede" <hdegoede@redhat.com>,
"Emilio López" <emilio@elopez.com.ar>,
linux-mmc@vger.kernel.org, "Chris Ball" <chris@printf.net>,
linux-kernel@vger.kernel.org,
"H Hartley Sweeten" <hsweeten@visionengravers.com>,
linux-sunxi@googlegroups.com, "Tejun Heo" <tj@kernel.org>,
"Maxime Ripard" <maxime.ripard@free-electrons.com>,
"Guennadi Liakhovetski" <g.liakhovetski@gmx.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs
Date: Tue, 11 Feb 2014 20:33:06 +0100 [thread overview]
Message-ID: <20140211190543.4568.83517.stgit@dizzy-6.o2s.ch> (raw)
Hello
The following patchset adds support for the SD/MMC host found in the Allwinner SoCs.
It contains all the necessary modifications for clock environment and also the device
tree script modification which add it to all the boards using it.
The clock environment function needed for phase offset configuration has
been proposed and implemented by Emilio.
A lot of work and cleanup has been done by Hans de Goede. Special thanks to him!
This patchset is the 4th attempt to send this driver upstream.
Changes since v1:
-Using mmc_of_parse instead of diy dt parsing
-Adding nodes for all mmc controller to the dtsi files,
including sofar unused controllers
-Using generic GPIO slot library for WP/CD
-Adding additional MMC device nodes into DTSI files
Changes since v2:
-Add missing Signed-off-by tags
-Stop using __raw_readl / __raw_writel so that barriers are properly used
-Adding missing new lines
-Adding missing patch for automatic reparenting of clocks
Changes since v3:
-Move clk_enable / disable into host_init / exit (Hans)
-Fix hang on boot caused by irq storm (Hans)
Changes since v4:
-moving sunxi-mci.{c/h} to sunxi-mmc.{c/h}
-removing camel cases from the defines in sunxi-mmc.h
-moving defines out of the struct definition
since this is bad coding style
-adding documentation for the device tree binding
---
David Lanzendörfer (5):
ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
ARM: dts: sun7i: Add support for mmc
ARM: dts: sun4i: Add support for mmc
ARM: dts: sun5i: Add support for mmc
ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs
Emilio López (2):
clk: sunxi: factors: automatic reparenting support
clk: sunxi: Implement MMC phase control
Hans de Goede (1):
ARM: sunxi: clk: export clk_sunxi_mmc_phase_control
.../devicetree/bindings/mmc/sunxi-mmc.txt | 32 +
arch/arm/boot/dts/sun4i-a10-a1000.dts | 8
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8
arch/arm/boot/dts/sun4i-a10.dtsi | 54 +
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 +
arch/arm/boot/dts/sun5i-a10s.dtsi | 44 +
arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 15
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 15
arch/arm/boot/dts/sun5i-a13.dtsi | 37 +
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +
arch/arm/boot/dts/sun7i-a20.dtsi | 61 +
drivers/clk/sunxi/clk-factors.c | 36 +
drivers/clk/sunxi/clk-sunxi.c | 35 +
drivers/mmc/host/Kconfig | 7
drivers/mmc/host/Makefile | 2
drivers/mmc/host/sunxi-mmc.c | 872 ++++++++++++++++++++
drivers/mmc/host/sunxi-mmc.h | 239 +++++
include/linux/clk/sunxi.h | 22 +
20 files changed, 1556 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
create mode 100644 drivers/mmc/host/sunxi-mmc.c
create mode 100644 drivers/mmc/host/sunxi-mmc.h
create mode 100644 include/linux/clk/sunxi.h
--
Signature
WARNING: multiple messages have this Message-ID (diff)
From: "David Lanzendörfer" <david.lanzendoerfer-Z7Kmv9EsliU@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Ulf Hansson"
<ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Laurent Pinchart"
<laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
"Mike Turquette"
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Simon Baatz" <gmbnomis-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Hans de Goede"
<hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
"Emilio López" <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Chris Ball" <chris-OsFVWbfNK3isTnJN9+BGXg@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"H Hartley Sweeten"
<hsweeten-3FF4nKcrg1dE2c76skzGb0EOCMrvLtNR@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
"Tejun Heo" <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Maxime Ripard"
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
"Guennadi Liakhovetski"
<g.liakhovetski-Mmb7MZpHnFY@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v5 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs
Date: Tue, 11 Feb 2014 20:33:06 +0100 [thread overview]
Message-ID: <20140211190543.4568.83517.stgit@dizzy-6.o2s.ch> (raw)
Hello
The following patchset adds support for the SD/MMC host found in the Allwinner SoCs.
It contains all the necessary modifications for clock environment and also the device
tree script modification which add it to all the boards using it.
The clock environment function needed for phase offset configuration has
been proposed and implemented by Emilio.
A lot of work and cleanup has been done by Hans de Goede. Special thanks to him!
This patchset is the 4th attempt to send this driver upstream.
Changes since v1:
-Using mmc_of_parse instead of diy dt parsing
-Adding nodes for all mmc controller to the dtsi files,
including sofar unused controllers
-Using generic GPIO slot library for WP/CD
-Adding additional MMC device nodes into DTSI files
Changes since v2:
-Add missing Signed-off-by tags
-Stop using __raw_readl / __raw_writel so that barriers are properly used
-Adding missing new lines
-Adding missing patch for automatic reparenting of clocks
Changes since v3:
-Move clk_enable / disable into host_init / exit (Hans)
-Fix hang on boot caused by irq storm (Hans)
Changes since v4:
-moving sunxi-mci.{c/h} to sunxi-mmc.{c/h}
-removing camel cases from the defines in sunxi-mmc.h
-moving defines out of the struct definition
since this is bad coding style
-adding documentation for the device tree binding
---
David Lanzendörfer (5):
ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
ARM: dts: sun7i: Add support for mmc
ARM: dts: sun4i: Add support for mmc
ARM: dts: sun5i: Add support for mmc
ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs
Emilio López (2):
clk: sunxi: factors: automatic reparenting support
clk: sunxi: Implement MMC phase control
Hans de Goede (1):
ARM: sunxi: clk: export clk_sunxi_mmc_phase_control
.../devicetree/bindings/mmc/sunxi-mmc.txt | 32 +
arch/arm/boot/dts/sun4i-a10-a1000.dts | 8
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8
arch/arm/boot/dts/sun4i-a10.dtsi | 54 +
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 +
arch/arm/boot/dts/sun5i-a10s.dtsi | 44 +
arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 15
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 15
arch/arm/boot/dts/sun5i-a13.dtsi | 37 +
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +
arch/arm/boot/dts/sun7i-a20.dtsi | 61 +
drivers/clk/sunxi/clk-factors.c | 36 +
drivers/clk/sunxi/clk-sunxi.c | 35 +
drivers/mmc/host/Kconfig | 7
drivers/mmc/host/Makefile | 2
drivers/mmc/host/sunxi-mmc.c | 872 ++++++++++++++++++++
drivers/mmc/host/sunxi-mmc.h | 239 +++++
include/linux/clk/sunxi.h | 22 +
20 files changed, 1556 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
create mode 100644 drivers/mmc/host/sunxi-mmc.c
create mode 100644 drivers/mmc/host/sunxi-mmc.h
create mode 100644 include/linux/clk/sunxi.h
--
Signature
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.
WARNING: multiple messages have this Message-ID (diff)
From: david.lanzendoerfer@o2s.ch (David Lanzendörfer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs
Date: Tue, 11 Feb 2014 20:33:06 +0100 [thread overview]
Message-ID: <20140211190543.4568.83517.stgit@dizzy-6.o2s.ch> (raw)
Hello
The following patchset adds support for the SD/MMC host found in the Allwinner SoCs.
It contains all the necessary modifications for clock environment and also the device
tree script modification which add it to all the boards using it.
The clock environment function needed for phase offset configuration has
been proposed and implemented by Emilio.
A lot of work and cleanup has been done by Hans de Goede. Special thanks to him!
This patchset is the 4th attempt to send this driver upstream.
Changes since v1:
-Using mmc_of_parse instead of diy dt parsing
-Adding nodes for all mmc controller to the dtsi files,
including sofar unused controllers
-Using generic GPIO slot library for WP/CD
-Adding additional MMC device nodes into DTSI files
Changes since v2:
-Add missing Signed-off-by tags
-Stop using __raw_readl / __raw_writel so that barriers are properly used
-Adding missing new lines
-Adding missing patch for automatic reparenting of clocks
Changes since v3:
-Move clk_enable / disable into host_init / exit (Hans)
-Fix hang on boot caused by irq storm (Hans)
Changes since v4:
-moving sunxi-mci.{c/h} to sunxi-mmc.{c/h}
-removing camel cases from the defines in sunxi-mmc.h
-moving defines out of the struct definition
since this is bad coding style
-adding documentation for the device tree binding
---
David Lanzend?rfer (5):
ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
ARM: dts: sun7i: Add support for mmc
ARM: dts: sun4i: Add support for mmc
ARM: dts: sun5i: Add support for mmc
ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs
Emilio L?pez (2):
clk: sunxi: factors: automatic reparenting support
clk: sunxi: Implement MMC phase control
Hans de Goede (1):
ARM: sunxi: clk: export clk_sunxi_mmc_phase_control
.../devicetree/bindings/mmc/sunxi-mmc.txt | 32 +
arch/arm/boot/dts/sun4i-a10-a1000.dts | 8
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8
arch/arm/boot/dts/sun4i-a10.dtsi | 54 +
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 +
arch/arm/boot/dts/sun5i-a10s.dtsi | 44 +
arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 15
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 15
arch/arm/boot/dts/sun5i-a13.dtsi | 37 +
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +
arch/arm/boot/dts/sun7i-a20.dtsi | 61 +
drivers/clk/sunxi/clk-factors.c | 36 +
drivers/clk/sunxi/clk-sunxi.c | 35 +
drivers/mmc/host/Kconfig | 7
drivers/mmc/host/Makefile | 2
drivers/mmc/host/sunxi-mmc.c | 872 ++++++++++++++++++++
drivers/mmc/host/sunxi-mmc.h | 239 +++++
include/linux/clk/sunxi.h | 22 +
20 files changed, 1556 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
create mode 100644 drivers/mmc/host/sunxi-mmc.c
create mode 100644 drivers/mmc/host/sunxi-mmc.h
create mode 100644 include/linux/clk/sunxi.h
--
Signature
next reply other threads:[~2014-02-11 19:33 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-11 19:33 David Lanzendörfer [this message]
2014-02-11 19:33 ` [PATCH v5 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` [PATCH v5 1/8] clk: sunxi: factors: automatic reparenting support David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` [PATCH v5 2/8] clk: sunxi: Implement MMC phase control David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` [PATCH v5 3/8] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` [PATCH v5 4/8] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-11 19:33 ` David Lanzendörfer
2014-02-13 7:24 ` [linux-sunxi] " Chen-Yu Tsai
2014-02-13 7:24 ` Chen-Yu Tsai
2014-02-13 7:24 ` Chen-Yu Tsai
2014-02-11 19:34 ` [PATCH v5 5/8] ARM: dts: sun7i: Add support for mmc David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
2014-02-11 19:34 ` [PATCH v5 6/8] ARM: dts: sun4i: " David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
2014-03-10 21:49 ` mr.nuke.me
2014-03-10 21:49 ` mr.nuke.me at gmail.com
2014-03-10 21:49 ` mr.nuke.me-Re5JQEeQqe8AvxtiuMwx3w
2014-03-11 15:55 ` Hans de Goede
2014-03-11 15:55 ` Hans de Goede
2014-03-11 15:55 ` Hans de Goede
2014-03-11 16:20 ` David Lanzendörfer
2014-03-11 16:20 ` David Lanzendörfer
2014-03-11 16:20 ` David Lanzendörfer
2014-03-11 16:20 ` David Lanzendörfer
[not found] ` <531F3203.3010807-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-11 16:20 ` David Lanzendörfer
2014-03-11 16:20 ` David Lanzendörfer
2014-02-11 19:34 ` [PATCH v5 7/8] ARM: dts: sun5i: " David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
2014-02-11 19:34 ` [PATCH v5 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
2014-02-11 19:34 ` David Lanzendörfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140211190543.4568.83517.stgit@dizzy-6.o2s.ch \
--to=david.lanzendoerfer@o2s.ch \
--cc=chris@printf.net \
--cc=devicetree@vger.kernel.org \
--cc=emilio@elopez.com.ar \
--cc=g.liakhovetski@gmx.de \
--cc=gmbnomis@gmail.com \
--cc=hdegoede@redhat.com \
--cc=hsweeten@visionengravers.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@linaro.org \
--cc=tj@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.