* [RFC PATCH v3 0/9] imx-drm dt bindings
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: David Airlie, Greg Kroah-Hartman, Shawn Guo, Fabio Estevam,
Grant Likely, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel
Hi,
here is an updated and more complete version of the imx-drm DT binding
series. These patches apply on top of Russell's second preview of the
imx-drm cleanup series on v3.14-rc2. I have added device tree bindings
between IPU and the encoders as documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
and used those to determine the possible_crtcs and mux_id.
The crtc cookie is replaced with a the port device tree node,
which is unique and therefore allows to get rid of the di_id
comparison. Storing the multiplexer input numbers in the device
tree removes the need to know the ipu_id. This should also allow
to replace IPU2 with LCDIF on i.MX6 Solo more easily.
In v3 also connections between display interface ports and encoders are
used to find all necessary components, so that only the display interfaces
have to be configured in the imx-drm node. This allows to move the imx-drm
node into the SoC level dtsi. I've also updated the existing i.MX51 and
i.MX53 device trees this time and updated/added the devicetree binding
documentation.
Patch 2/9 adds a temporary copy of the v4l2_of parser functions. Those
are going to be moved to some place where they can be used by drm drivers,
eventually, so those local copies can be dropped again.
regards
Philipp
Lucas Stach (1):
staging: imx-drm-core: don't request probe deferral in
imx_drm_encoder_parse_of
Philipp Zabel (8):
staging: imx-drm: Add temporary copies of v4l2-of parsing functions
staging: imx-drm-core: Use OF graph to find components and connections
between encoder and crtcs
staging: imx-drm: Document updated imx-drm device tree bindings
staging: imx-drm: Document imx-hdmi device tree bindings
ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to
dtsi
ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to
dtsi
ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node
to dtsi
staging: imx-drm: Update TODO
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 48 ++++-
.../devicetree/bindings/staging/imx-drm/hdmi.txt | 53 +++++
.../devicetree/bindings/staging/imx-drm/ldb.txt | 20 +-
arch/arm/boot/dts/imx51-apf51dev.dts | 11 +-
arch/arm/boot/dts/imx51-babbage.dts | 28 ++-
arch/arm/boot/dts/imx51.dtsi | 22 ++-
arch/arm/boot/dts/imx53-m53evk.dts | 17 +-
arch/arm/boot/dts/imx53-mba53.dts | 15 +-
arch/arm/boot/dts/imx53-qsb.dts | 17 +-
arch/arm/boot/dts/imx53.dtsi | 64 +++++-
arch/arm/boot/dts/imx6dl.dtsi | 22 +--
arch/arm/boot/dts/imx6q-sabresd.dts | 4 -
arch/arm/boot/dts/imx6q.dtsi | 124 +++++++++++-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 -
arch/arm/boot/dts/imx6qdl.dtsi | 138 ++++++++++++-
drivers/staging/imx-drm/Makefile | 2 +-
drivers/staging/imx-drm/TODO | 5 -
drivers/staging/imx-drm/imx-drm-core.c | 217 ++++++++++++++-------
drivers/staging/imx-drm/imx-drm-of.c | 132 +++++++++++++
drivers/staging/imx-drm/imx-drm.h | 11 +-
drivers/staging/imx-drm/imx-hdmi.c | 2 +-
drivers/staging/imx-drm/imx-ldb.c | 4 +-
drivers/staging/imx-drm/ipuv3-crtc.c | 47 ++++-
23 files changed, 842 insertions(+), 167 deletions(-)
create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
create mode 100644 drivers/staging/imx-drm/imx-drm-of.c
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 0/9] imx-drm dt bindings
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
here is an updated and more complete version of the imx-drm DT binding
series. These patches apply on top of Russell's second preview of the
imx-drm cleanup series on v3.14-rc2. I have added device tree bindings
between IPU and the encoders as documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
and used those to determine the possible_crtcs and mux_id.
The crtc cookie is replaced with a the port device tree node,
which is unique and therefore allows to get rid of the di_id
comparison. Storing the multiplexer input numbers in the device
tree removes the need to know the ipu_id. This should also allow
to replace IPU2 with LCDIF on i.MX6 Solo more easily.
In v3 also connections between display interface ports and encoders are
used to find all necessary components, so that only the display interfaces
have to be configured in the imx-drm node. This allows to move the imx-drm
node into the SoC level dtsi. I've also updated the existing i.MX51 and
i.MX53 device trees this time and updated/added the devicetree binding
documentation.
Patch 2/9 adds a temporary copy of the v4l2_of parser functions. Those
are going to be moved to some place where they can be used by drm drivers,
eventually, so those local copies can be dropped again.
regards
Philipp
Lucas Stach (1):
staging: imx-drm-core: don't request probe deferral in
imx_drm_encoder_parse_of
Philipp Zabel (8):
staging: imx-drm: Add temporary copies of v4l2-of parsing functions
staging: imx-drm-core: Use OF graph to find components and connections
between encoder and crtcs
staging: imx-drm: Document updated imx-drm device tree bindings
staging: imx-drm: Document imx-hdmi device tree bindings
ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to
dtsi
ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to
dtsi
ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node
to dtsi
staging: imx-drm: Update TODO
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 48 ++++-
.../devicetree/bindings/staging/imx-drm/hdmi.txt | 53 +++++
.../devicetree/bindings/staging/imx-drm/ldb.txt | 20 +-
arch/arm/boot/dts/imx51-apf51dev.dts | 11 +-
arch/arm/boot/dts/imx51-babbage.dts | 28 ++-
arch/arm/boot/dts/imx51.dtsi | 22 ++-
arch/arm/boot/dts/imx53-m53evk.dts | 17 +-
arch/arm/boot/dts/imx53-mba53.dts | 15 +-
arch/arm/boot/dts/imx53-qsb.dts | 17 +-
arch/arm/boot/dts/imx53.dtsi | 64 +++++-
arch/arm/boot/dts/imx6dl.dtsi | 22 +--
arch/arm/boot/dts/imx6q-sabresd.dts | 4 -
arch/arm/boot/dts/imx6q.dtsi | 124 +++++++++++-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 -
arch/arm/boot/dts/imx6qdl.dtsi | 138 ++++++++++++-
drivers/staging/imx-drm/Makefile | 2 +-
drivers/staging/imx-drm/TODO | 5 -
drivers/staging/imx-drm/imx-drm-core.c | 217 ++++++++++++++-------
drivers/staging/imx-drm/imx-drm-of.c | 132 +++++++++++++
drivers/staging/imx-drm/imx-drm.h | 11 +-
drivers/staging/imx-drm/imx-hdmi.c | 2 +-
drivers/staging/imx-drm/imx-ldb.c | 4 +-
drivers/staging/imx-drm/ipuv3-crtc.c | 47 ++++-
23 files changed, 842 insertions(+), 167 deletions(-)
create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
create mode 100644 drivers/staging/imx-drm/imx-drm-of.c
--
1.8.5.3
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Philipp Zabel, David Airlie,
Greg Kroah-Hartman, dri-devel, kernel, Grant Likely, Shawn Guo,
linux-arm-kernel, Lucas Stach
From: Lucas Stach <l.stach@pengutronix.de>
Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
it is too late to request probe deferral. Rather the core should make sure
that the crtcs are bound before the encoders, after all needed components
are probed.
This fixes probe failure when using the LDB on i.MX6.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/staging/imx-drm/imx-drm-core.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index dcba518..98a97a2 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -457,21 +457,13 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
return ret;
id = args.args_count > 0 ? args.args[0] : 0;
- mask = imx_drm_find_crtc_mask(imxdrm, args.np, id);
+ crtc_mask |= imx_drm_find_crtc_mask(imxdrm, args.np, id);
of_node_put(args.np);
-
- /*
- * If we failed to find the CRTC(s) which this encoder is
- * supposed to be connected to, it's because the CRTC has
- * not been registered yet. Defer probing, and hope that
- * the required CRTC is added later.
- */
- if (mask == 0)
- return -EPROBE_DEFER;
-
- crtc_mask |= mask;
}
+ if (i == 0 || !crtc_mask)
+ return -ENOENT;
+
encoder->possible_crtcs = crtc_mask;
/* FIXME: this is the mask of outputs which can clone this output. */
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Lucas Stach <l.stach@pengutronix.de>
Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
it is too late to request probe deferral. Rather the core should make sure
that the crtcs are bound before the encoders, after all needed components
are probed.
This fixes probe failure when using the LDB on i.MX6.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/staging/imx-drm/imx-drm-core.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index dcba518..98a97a2 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -457,21 +457,13 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
return ret;
id = args.args_count > 0 ? args.args[0] : 0;
- mask = imx_drm_find_crtc_mask(imxdrm, args.np, id);
+ crtc_mask |= imx_drm_find_crtc_mask(imxdrm, args.np, id);
of_node_put(args.np);
-
- /*
- * If we failed to find the CRTC(s) which this encoder is
- * supposed to be connected to, it's because the CRTC has
- * not been registered yet. Defer probing, and hope that
- * the required CRTC is added later.
- */
- if (mask == 0)
- return -EPROBE_DEFER;
-
- crtc_mask |= mask;
}
+ if (i == 0 || !crtc_mask)
+ return -ENOENT;
+
encoder->possible_crtcs = crtc_mask;
/* FIXME: this is the mask of outputs which can clone this output. */
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Philipp Zabel, David Airlie,
Greg Kroah-Hartman, dri-devel, kernel, Grant Likely, Shawn Guo,
linux-arm-kernel
From: Philipp Zabel <philipp.zabel@gmail.com>
The existing v4l2-of parser functions for the video interface bindings
described in Documentation/device-tree/bindings/media/video-interfaces.txt
are useful for DRM drivers, too. They will be moved to drivers/media
so they can be used by drm drivers, too. Until then, duplicate the
v4l2-of parser functions temporarily.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
---
drivers/staging/imx-drm/Makefile | 2 +-
drivers/staging/imx-drm/imx-drm-of.c | 132 +++++++++++++++++++++++++++++++++++
drivers/staging/imx-drm/imx-drm.h | 6 ++
3 files changed, 139 insertions(+), 1 deletion(-)
create mode 100644 drivers/staging/imx-drm/imx-drm-of.c
diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile
index 129e3a3..743b875 100644
--- a/drivers/staging/imx-drm/Makefile
+++ b/drivers/staging/imx-drm/Makefile
@@ -1,5 +1,5 @@
-imxdrm-objs := imx-drm-core.o
+imxdrm-objs := imx-drm-core.o imx-drm-of.o
obj-$(CONFIG_DRM_IMX) += imxdrm.o
diff --git a/drivers/staging/imx-drm/imx-drm-of.c b/drivers/staging/imx-drm/imx-drm-of.c
new file mode 100644
index 0000000..e14b4f3
--- /dev/null
+++ b/drivers/staging/imx-drm/imx-drm-of.c
@@ -0,0 +1,132 @@
+/*
+ * Video Interface OF binding parsing library
+ *
+ * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Copyright (C) 2012 Renesas Electronics Corp.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+/**
+ * imx_drm_of_get_next_endpoint() - get next endpoint node
+ * @parent: pointer to the parent device node
+ * @prev: previous endpoint node, or NULL to get first
+ *
+ * Return: An 'endpoint' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *imx_drm_of_get_next_endpoint(
+ const struct device_node *parent, struct device_node *prev)
+{
+ struct device_node *endpoint;
+ struct device_node *port = NULL;
+
+ if (!parent)
+ return NULL;
+
+ if (!prev) {
+ struct device_node *node;
+ /*
+ * It's the first call, we have to find a port subnode
+ * within this node or within an optional 'ports' node.
+ */
+ node = of_get_child_by_name(parent, "ports");
+ if (node)
+ parent = node;
+
+ port = of_get_child_by_name(parent, "port");
+
+ if (port) {
+ /* Found a port, get an endpoint. */
+ endpoint = of_get_next_child(port, NULL);
+ of_node_put(port);
+ } else {
+ endpoint = NULL;
+ }
+
+ if (!endpoint)
+ pr_err("%s(): no endpoint nodes specified for %s\n",
+ __func__, parent->full_name);
+ of_node_put(node);
+ } else {
+ port = of_get_parent(prev);
+ if (!port) {
+ /* Hm, has someone given us the root node ?... */
+ of_node_put(prev);
+ return NULL;
+ }
+
+ endpoint = of_get_next_child(port, prev);
+ if (endpoint) {
+ of_node_put(port);
+ return endpoint;
+ }
+
+ /* No more endpoints under this port, try the next one. */
+ do {
+ port = of_get_next_child(parent, port);
+ if (!port)
+ return NULL;
+ } while (of_node_cmp(port->name, "port"));
+
+ /* Pick up the first endpoint in this port. */
+ endpoint = of_get_next_child(port, NULL);
+ of_node_put(port);
+ }
+
+ return endpoint;
+}
+EXPORT_SYMBOL_GPL(imx_drm_of_get_next_endpoint);
+
+/**
+ * imx_drm_of_get_remote_port_parent() - get remote port's parent node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: Remote device node associated with remote endpoint node linked
+ * to @node. Use of_node_put() on it when done.
+ */
+struct device_node *imx_drm_of_get_remote_port_parent(
+ const struct device_node *node)
+{
+ struct device_node *np;
+ unsigned int depth;
+
+ /* Get remote endpoint node. */
+ np = of_parse_phandle(node, "remote-endpoint", 0);
+
+ /* Walk 3 levels up only if there is 'ports' node. */
+ for (depth = 3; depth && np; depth--) {
+ np = of_get_next_parent(np);
+ if (depth == 2 && of_node_cmp(np->name, "ports"))
+ break;
+ }
+ return np;
+}
+EXPORT_SYMBOL(imx_drm_of_get_remote_port_parent);
+
+/**
+ * imx_drm_of_get_remote_port() - get remote port node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: Remote port node associated with remote endpoint node linked
+ * to @node. Use of_node_put() on it when done.
+ */
+struct device_node *imx_drm_of_get_remote_port(const struct device_node *node)
+{
+ struct device_node *np;
+
+ /* Get remote endpoint node. */
+ np = of_parse_phandle(node, "remote-endpoint", 0);
+ if (!np)
+ return NULL;
+ return of_get_next_parent(np);
+}
+EXPORT_SYMBOL_GPL(imx_drm_of_get_remote_port);
diff --git a/drivers/staging/imx-drm/imx-drm.h b/drivers/staging/imx-drm/imx-drm.h
index aa21028..793a80b 100644
--- a/drivers/staging/imx-drm/imx-drm.h
+++ b/drivers/staging/imx-drm/imx-drm.h
@@ -58,4 +58,10 @@ int imx_drm_connector_mode_valid(struct drm_connector *connector,
void imx_drm_connector_destroy(struct drm_connector *connector);
void imx_drm_encoder_destroy(struct drm_encoder *encoder);
+struct device_node *imx_drm_of_get_next_endpoint(
+ const struct device_node *parent, struct device_node *prev);
+struct device_node *imx_drm_of_get_remote_port_parent(
+ const struct device_node *node);
+struct device_node *imx_drm_of_get_remote_port(const struct device_node *node);
+
#endif /* _IMX_DRM_H_ */
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
From: Philipp Zabel <philipp.zabel@gmail.com>
The existing v4l2-of parser functions for the video interface bindings
described in Documentation/device-tree/bindings/media/video-interfaces.txt
are useful for DRM drivers, too. They will be moved to drivers/media
so they can be used by drm drivers, too. Until then, duplicate the
v4l2-of parser functions temporarily.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
---
drivers/staging/imx-drm/Makefile | 2 +-
drivers/staging/imx-drm/imx-drm-of.c | 132 +++++++++++++++++++++++++++++++++++
drivers/staging/imx-drm/imx-drm.h | 6 ++
3 files changed, 139 insertions(+), 1 deletion(-)
create mode 100644 drivers/staging/imx-drm/imx-drm-of.c
diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile
index 129e3a3..743b875 100644
--- a/drivers/staging/imx-drm/Makefile
+++ b/drivers/staging/imx-drm/Makefile
@@ -1,5 +1,5 @@
-imxdrm-objs := imx-drm-core.o
+imxdrm-objs := imx-drm-core.o imx-drm-of.o
obj-$(CONFIG_DRM_IMX) += imxdrm.o
diff --git a/drivers/staging/imx-drm/imx-drm-of.c b/drivers/staging/imx-drm/imx-drm-of.c
new file mode 100644
index 0000000..e14b4f3
--- /dev/null
+++ b/drivers/staging/imx-drm/imx-drm-of.c
@@ -0,0 +1,132 @@
+/*
+ * Video Interface OF binding parsing library
+ *
+ * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Copyright (C) 2012 Renesas Electronics Corp.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+/**
+ * imx_drm_of_get_next_endpoint() - get next endpoint node
+ * @parent: pointer to the parent device node
+ * @prev: previous endpoint node, or NULL to get first
+ *
+ * Return: An 'endpoint' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *imx_drm_of_get_next_endpoint(
+ const struct device_node *parent, struct device_node *prev)
+{
+ struct device_node *endpoint;
+ struct device_node *port = NULL;
+
+ if (!parent)
+ return NULL;
+
+ if (!prev) {
+ struct device_node *node;
+ /*
+ * It's the first call, we have to find a port subnode
+ * within this node or within an optional 'ports' node.
+ */
+ node = of_get_child_by_name(parent, "ports");
+ if (node)
+ parent = node;
+
+ port = of_get_child_by_name(parent, "port");
+
+ if (port) {
+ /* Found a port, get an endpoint. */
+ endpoint = of_get_next_child(port, NULL);
+ of_node_put(port);
+ } else {
+ endpoint = NULL;
+ }
+
+ if (!endpoint)
+ pr_err("%s(): no endpoint nodes specified for %s\n",
+ __func__, parent->full_name);
+ of_node_put(node);
+ } else {
+ port = of_get_parent(prev);
+ if (!port) {
+ /* Hm, has someone given us the root node ?... */
+ of_node_put(prev);
+ return NULL;
+ }
+
+ endpoint = of_get_next_child(port, prev);
+ if (endpoint) {
+ of_node_put(port);
+ return endpoint;
+ }
+
+ /* No more endpoints under this port, try the next one. */
+ do {
+ port = of_get_next_child(parent, port);
+ if (!port)
+ return NULL;
+ } while (of_node_cmp(port->name, "port"));
+
+ /* Pick up the first endpoint in this port. */
+ endpoint = of_get_next_child(port, NULL);
+ of_node_put(port);
+ }
+
+ return endpoint;
+}
+EXPORT_SYMBOL_GPL(imx_drm_of_get_next_endpoint);
+
+/**
+ * imx_drm_of_get_remote_port_parent() - get remote port's parent node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: Remote device node associated with remote endpoint node linked
+ * to @node. Use of_node_put() on it when done.
+ */
+struct device_node *imx_drm_of_get_remote_port_parent(
+ const struct device_node *node)
+{
+ struct device_node *np;
+ unsigned int depth;
+
+ /* Get remote endpoint node. */
+ np = of_parse_phandle(node, "remote-endpoint", 0);
+
+ /* Walk 3 levels up only if there is 'ports' node. */
+ for (depth = 3; depth && np; depth--) {
+ np = of_get_next_parent(np);
+ if (depth == 2 && of_node_cmp(np->name, "ports"))
+ break;
+ }
+ return np;
+}
+EXPORT_SYMBOL(imx_drm_of_get_remote_port_parent);
+
+/**
+ * imx_drm_of_get_remote_port() - get remote port node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: Remote port node associated with remote endpoint node linked
+ * to @node. Use of_node_put() on it when done.
+ */
+struct device_node *imx_drm_of_get_remote_port(const struct device_node *node)
+{
+ struct device_node *np;
+
+ /* Get remote endpoint node. */
+ np = of_parse_phandle(node, "remote-endpoint", 0);
+ if (!np)
+ return NULL;
+ return of_get_next_parent(np);
+}
+EXPORT_SYMBOL_GPL(imx_drm_of_get_remote_port);
diff --git a/drivers/staging/imx-drm/imx-drm.h b/drivers/staging/imx-drm/imx-drm.h
index aa21028..793a80b 100644
--- a/drivers/staging/imx-drm/imx-drm.h
+++ b/drivers/staging/imx-drm/imx-drm.h
@@ -58,4 +58,10 @@ int imx_drm_connector_mode_valid(struct drm_connector *connector,
void imx_drm_connector_destroy(struct drm_connector *connector);
void imx_drm_encoder_destroy(struct drm_encoder *encoder);
+struct device_node *imx_drm_of_get_next_endpoint(
+ const struct device_node *parent, struct device_node *prev);
+struct device_node *imx_drm_of_get_remote_port_parent(
+ const struct device_node *node);
+struct device_node *imx_drm_of_get_remote_port(const struct device_node *node);
+
#endif /* _IMX_DRM_H_ */
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 3/9] staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Greg Kroah-Hartman, dri-devel, kernel,
Grant Likely, linux-arm-kernel
This patch adds support to find the involved components connected to the
IPU display interface ports using the OF graph bindings documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
Each display interface needs to have an associated port node in the
device tree. We can associate this node with the crtc platform device
and use it to find the crtc corresponding to a given port node instead
of using a combination of parent device node and id number, as before.
Explicitly converting the void* cookie to the port device tree node
allows to get rid of the ipu_id and di_id fields. The multiplexer
setting on i.MX6 now can be obtained from the port id (reg property)
in the device tree.
The imx-drm node now needs a ports property that contains phandles
to each of the IPU display interface port nodes. From there, all
attached encoders are scanned and enabled encoders are added to a
waiting list.
The bind order makes sure that once all components are probed, crtcs
are bound before encoders, so that imx_drm_encoder_parse_of can be
called from the encoder bind callbacks.
For parsing the OF graph, temporary copies of the V4L2 OF graph
helpers are used, that can be removed again once those are available
at a generic place.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/staging/imx-drm/imx-drm-core.c | 203 ++++++++++++++++++++++-----------
drivers/staging/imx-drm/imx-drm.h | 5 +-
drivers/staging/imx-drm/imx-hdmi.c | 2 +-
drivers/staging/imx-drm/imx-ldb.c | 4 +-
drivers/staging/imx-drm/ipuv3-crtc.c | 47 ++++++--
5 files changed, 185 insertions(+), 76 deletions(-)
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index 98a97a2..92246d9 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -30,6 +30,11 @@
struct imx_drm_crtc;
+struct imx_drm_component {
+ struct device_node *of_node;
+ struct list_head list;
+};
+
struct imx_drm_device {
struct drm_device *drm;
struct imx_drm_crtc *crtc[MAX_CRTC];
@@ -41,9 +46,7 @@ struct imx_drm_crtc {
struct drm_crtc *crtc;
int pipe;
struct imx_drm_crtc_helper_funcs imx_drm_helper_funcs;
- void *cookie;
- int id;
- int mux_id;
+ struct device_node *port;
};
static int legacyfb_depth = 16;
@@ -341,14 +344,11 @@ err_kms:
/*
* imx_drm_add_crtc - add a new crtc
- *
- * The return value if !NULL is a cookie for the caller to pass to
- * imx_drm_remove_crtc later.
*/
int imx_drm_add_crtc(struct drm_device *drm, struct drm_crtc *crtc,
struct imx_drm_crtc **new_crtc,
const struct imx_drm_crtc_helper_funcs *imx_drm_helper_funcs,
- void *cookie, int id)
+ struct device_node *port)
{
struct imx_drm_device *imxdrm = drm->dev_private;
struct imx_drm_crtc *imx_drm_crtc;
@@ -370,9 +370,7 @@ int imx_drm_add_crtc(struct drm_device *drm, struct drm_crtc *crtc,
imx_drm_crtc->imx_drm_helper_funcs = *imx_drm_helper_funcs;
imx_drm_crtc->pipe = imxdrm->pipes++;
- imx_drm_crtc->cookie = cookie;
- imx_drm_crtc->id = id;
- imx_drm_crtc->mux_id = imx_drm_crtc->pipe;
+ imx_drm_crtc->port = port;
imx_drm_crtc->crtc = crtc;
imxdrm->crtc[imx_drm_crtc->pipe] = imx_drm_crtc;
@@ -416,21 +414,26 @@ int imx_drm_remove_crtc(struct imx_drm_crtc *imx_drm_crtc)
EXPORT_SYMBOL_GPL(imx_drm_remove_crtc);
/*
- * Find the DRM CRTC possible mask for the device node cookie/id.
+ * Find the DRM CRTC possible mask for the connected endpoint.
*
* The encoder possible masks are defined by their position in the
* mode_config crtc_list. This means that CRTCs must not be added
* or removed once the DRM device has been fully initialised.
*/
static uint32_t imx_drm_find_crtc_mask(struct imx_drm_device *imxdrm,
- void *cookie, int id)
+ struct device_node *endpoint)
{
+ struct device_node *port;
unsigned i;
+ port = imx_drm_of_get_remote_port(endpoint);
+ if (!port)
+ return 0;
+ of_node_put(port);
+
for (i = 0; i < MAX_CRTC; i++) {
struct imx_drm_crtc *imx_drm_crtc = imxdrm->crtc[i];
- if (imx_drm_crtc && imx_drm_crtc->id == id &&
- imx_drm_crtc->cookie == cookie)
+ if (imx_drm_crtc && imx_drm_crtc->port == port)
return drm_crtc_mask(imx_drm_crtc->crtc);
}
@@ -441,26 +444,20 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
struct drm_encoder *encoder, struct device_node *np)
{
struct imx_drm_device *imxdrm = drm->dev_private;
+ struct device_node *ep = NULL;
uint32_t crtc_mask = 0;
- int i, ret = 0;
-
- for (i = 0; !ret; i++) {
- struct of_phandle_args args;
- uint32_t mask;
- int id;
+ int i;
- ret = of_parse_phandle_with_args(np, "crtcs", "#crtc-cells", i,
- &args);
- if (ret == -ENOENT)
+ for (i = 0; ; i++) {
+ ep = imx_drm_of_get_next_endpoint(np, ep);
+ if (!ep)
break;
- if (ret < 0)
- return ret;
- id = args.args_count > 0 ? args.args[0] : 0;
- crtc_mask |= imx_drm_find_crtc_mask(imxdrm, args.np, id);
- of_node_put(args.np);
+ crtc_mask |= imx_drm_find_crtc_mask(imxdrm, ep);
}
+ if (ep)
+ of_node_put(ep);
if (i == 0 || !crtc_mask)
return -ENOENT;
@@ -473,11 +470,36 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
}
EXPORT_SYMBOL_GPL(imx_drm_encoder_parse_of);
-int imx_drm_encoder_get_mux_id(struct drm_encoder *encoder)
+/*
+ * @node: device tree node containing encoder input ports
+ * @encoder: drm_encoder
+ */
+int imx_drm_encoder_get_mux_id(struct device_node *node,
+ struct drm_encoder *encoder)
{
struct imx_drm_crtc *imx_crtc = imx_drm_find_crtc(encoder->crtc);
+ struct device_node *ep = NULL;
+ struct device_node *port;
+ int id, ret;
+
+ if (!node || !imx_crtc)
+ return -EINVAL;
+
+ do {
+ ep = imx_drm_of_get_next_endpoint(node, ep);
+ if (!ep)
+ break;
- return imx_crtc ? imx_crtc->mux_id : -EINVAL;
+ port = imx_drm_of_get_remote_port(ep);
+ of_node_put(port);
+ if (port == imx_crtc->port) {
+ ret = of_property_read_u32(ep->parent, "reg", &id);
+ of_node_put(ep);
+ return ret ? ret : id;
+ }
+ } while (ep);
+
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(imx_drm_encoder_get_mux_id);
@@ -520,48 +542,29 @@ static struct drm_driver imx_drm_driver = {
.patchlevel = 0,
};
-static int compare_parent_of(struct device *dev, void *data)
-{
- struct of_phandle_args *args = data;
- return dev->parent && dev->parent->of_node == args->np;
-}
-
static int compare_of(struct device *dev, void *data)
{
- return dev->of_node == data;
-}
-
-static int imx_drm_add_components(struct device *master, struct master *m)
-{
- struct device_node *np = master->of_node;
- unsigned i;
- int ret;
-
- for (i = 0; ; i++) {
- struct of_phandle_args args;
+ struct device_node *np = data;
- ret = of_parse_phandle_with_fixed_args(np, "crtcs", 1,
- i, &args);
- if (ret)
- break;
-
- ret = component_master_add_child(m, compare_parent_of, &args);
- of_node_put(args.np);
-
- if (ret)
- return ret;
+ /* Special case for LDB, one device for two channels */
+ if (of_node_cmp(np->name, "lvds-channel") == 0) {
+ np = of_get_parent(np);
+ of_node_put(np);
}
- for (i = 0; ; i++) {
- struct device_node *node;
+ return dev->of_node == np;
+}
- node = of_parse_phandle(np, "connectors", i);
- if (!node)
- break;
+static LIST_HEAD(imx_drm_components);
- ret = component_master_add_child(m, compare_of, node);
- of_node_put(node);
+static int imx_drm_add_components(struct device *master, struct master *m)
+{
+ struct imx_drm_component *component;
+ int ret;
+ list_for_each_entry(component, &imx_drm_components, list) {
+ ret = component_master_add_child(m, compare_of,
+ component->of_node);
if (ret)
return ret;
}
@@ -584,9 +587,81 @@ static const struct component_master_ops imx_drm_ops = {
.unbind = imx_drm_unbind,
};
+static struct imx_drm_component *imx_drm_find_component(struct device *dev,
+ struct device_node *node)
+{
+ struct imx_drm_component *component;
+
+ list_for_each_entry(component, &imx_drm_components, list)
+ if (component->of_node == node)
+ return component;
+
+ return NULL;
+}
+
+static int imx_drm_add_component(struct device *dev, struct device_node *node)
+{
+ struct imx_drm_component *component;
+
+ if (imx_drm_find_component(dev, node))
+ return 0;
+
+ component = devm_kzalloc(dev, sizeof(*component), GFP_KERNEL);
+ if (!component)
+ return -ENOMEM;
+
+ component->of_node = node;
+ list_add_tail(&component->list, &imx_drm_components);
+
+ return 0;
+}
+
static int imx_drm_platform_probe(struct platform_device *pdev)
{
+ struct device_node *ep, *port, *remote;
int ret;
+ int i;
+
+ /*
+ * Bind the IPU display interface ports first, so that
+ * imx_drm_encoder_parse_of called from encoder .bind callbacks
+ * works as expected.
+ */
+ for (i = 0; ; i++) {
+ port = of_parse_phandle(pdev->dev.of_node, "ports", i);
+ if (!port)
+ break;
+
+ ret = imx_drm_add_component(&pdev->dev, port);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (i == 0) {
+ dev_err(&pdev->dev, "missing 'ports' property\n");
+ return -ENODEV;
+ }
+
+ /* Then bind all encoders */
+ for (i = 0; ; i++) {
+ port = of_parse_phandle(pdev->dev.of_node, "ports", i);
+ if (!port)
+ break;
+
+ for_each_child_of_node(port, ep) {
+ remote = imx_drm_of_get_remote_port_parent(ep);
+ if (!remote || !of_device_is_available(remote)) {
+ of_node_put(remote);
+ continue;
+ }
+
+ ret = imx_drm_add_component(&pdev->dev, remote);
+ of_node_put(remote);
+ if (ret < 0)
+ return ret;
+ }
+ of_node_put(port);
+ }
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
diff --git a/drivers/staging/imx-drm/imx-drm.h b/drivers/staging/imx-drm/imx-drm.h
index 793a80b..447ddd7 100644
--- a/drivers/staging/imx-drm/imx-drm.h
+++ b/drivers/staging/imx-drm/imx-drm.h
@@ -30,7 +30,7 @@ struct imx_drm_crtc_helper_funcs {
int imx_drm_add_crtc(struct drm_device *drm, struct drm_crtc *crtc,
struct imx_drm_crtc **new_crtc,
const struct imx_drm_crtc_helper_funcs *imx_helper_funcs,
- void *cookie, int id);
+ struct device_node *port);
int imx_drm_remove_crtc(struct imx_drm_crtc *);
int imx_drm_init_drm(struct platform_device *pdev,
int preferred_bpp);
@@ -49,7 +49,8 @@ int imx_drm_panel_format_pins(struct drm_encoder *encoder,
int imx_drm_panel_format(struct drm_encoder *encoder,
u32 interface_pix_fmt);
-int imx_drm_encoder_get_mux_id(struct drm_encoder *encoder);
+int imx_drm_encoder_get_mux_id(struct device_node *node,
+ struct drm_encoder *encoder);
int imx_drm_encoder_parse_of(struct drm_device *drm,
struct drm_encoder *encoder, struct device_node *np);
diff --git a/drivers/staging/imx-drm/imx-hdmi.c b/drivers/staging/imx-drm/imx-hdmi.c
index a677e33..8509814 100644
--- a/drivers/staging/imx-drm/imx-hdmi.c
+++ b/drivers/staging/imx-drm/imx-hdmi.c
@@ -1453,7 +1453,7 @@ static void imx_hdmi_encoder_prepare(struct drm_encoder *encoder)
static void imx_hdmi_encoder_commit(struct drm_encoder *encoder)
{
struct imx_hdmi *hdmi = container_of(encoder, struct imx_hdmi, encoder);
- int mux = imx_drm_encoder_get_mux_id(encoder);
+ int mux = imx_drm_encoder_get_mux_id(hdmi->dev->of_node, encoder);
imx_hdmi_set_ipu_di_mux(hdmi, mux);
diff --git a/drivers/staging/imx-drm/imx-ldb.c b/drivers/staging/imx-drm/imx-ldb.c
index 5168c76..301c430 100644
--- a/drivers/staging/imx-drm/imx-ldb.c
+++ b/drivers/staging/imx-drm/imx-ldb.c
@@ -168,7 +168,7 @@ static void imx_ldb_encoder_prepare(struct drm_encoder *encoder)
u32 pixel_fmt;
unsigned long serial_clk;
unsigned long di_clk = mode->clock * 1000;
- int mux = imx_drm_encoder_get_mux_id(encoder);
+ int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->child, encoder);
if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) {
/* dual channel LVDS mode */
@@ -203,7 +203,7 @@ static void imx_ldb_encoder_commit(struct drm_encoder *encoder)
struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
struct imx_ldb *ldb = imx_ldb_ch->ldb;
int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
- int mux = imx_drm_encoder_get_mux_id(encoder);
+ int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->child, encoder);
if (dual) {
clk_prepare_enable(ldb->clk[0]);
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index e646017..a8d0178 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -350,10 +350,8 @@ static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
return ret;
}
- ret = imx_drm_add_crtc(drm, &ipu_crtc->base,
- &ipu_crtc->imx_crtc,
- &ipu_crtc_helper_funcs,
- ipu_crtc->dev->parent->of_node, pdata->di);
+ ret = imx_drm_add_crtc(drm, &ipu_crtc->base, &ipu_crtc->imx_crtc,
+ &ipu_crtc_helper_funcs, ipu_crtc->dev->of_node);
if (ret) {
dev_err(ipu_crtc->dev, "adding crtc failed with %d.\n", ret);
goto err_put_resources;
@@ -401,6 +399,28 @@ err_put_resources:
return ret;
}
+static struct device_node *ipu_drm_get_port_by_id(struct device_node *parent,
+ int port_id)
+{
+ struct device_node *port;
+ int id, ret;
+
+ port = of_get_child_by_name(parent, "port");
+ while (port) {
+ ret = of_property_read_u32(port, "reg", &id);
+ if (!ret && id == port_id)
+ return port;
+
+ do {
+ port = of_get_next_child(parent, port);
+ if (!port)
+ return NULL;
+ } while (of_node_cmp(port->name, "port"));
+ }
+
+ return NULL;
+}
+
static int ipu_drm_bind(struct device *dev, struct device *master, void *data)
{
struct ipu_client_platformdata *pdata = dev->platform_data;
@@ -441,16 +461,29 @@ static const struct component_ops ipu_crtc_ops = {
static int ipu_drm_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct ipu_client_platformdata *pdata = dev->platform_data;
int ret;
- if (!pdev->dev.platform_data)
+ if (!dev->platform_data)
return -EINVAL;
- ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (!dev->of_node) {
+ /* Associate crtc device with the corresponding DI port node */
+ dev->of_node = ipu_drm_get_port_by_id(dev->parent->of_node,
+ pdata->di + 2);
+ if (!dev->of_node) {
+ dev_err(dev, "missing port@%d node in %s\n",
+ pdata->di + 2, dev->parent->of_node->full_name);
+ return -ENODEV;
+ }
+ }
+
+ ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
- return component_add(&pdev->dev, &ipu_crtc_ops);
+ return component_add(dev, &ipu_crtc_ops);
}
static int ipu_drm_remove(struct platform_device *pdev)
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 3/9] staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support to find the involved components connected to the
IPU display interface ports using the OF graph bindings documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
Each display interface needs to have an associated port node in the
device tree. We can associate this node with the crtc platform device
and use it to find the crtc corresponding to a given port node instead
of using a combination of parent device node and id number, as before.
Explicitly converting the void* cookie to the port device tree node
allows to get rid of the ipu_id and di_id fields. The multiplexer
setting on i.MX6 now can be obtained from the port id (reg property)
in the device tree.
The imx-drm node now needs a ports property that contains phandles
to each of the IPU display interface port nodes. From there, all
attached encoders are scanned and enabled encoders are added to a
waiting list.
The bind order makes sure that once all components are probed, crtcs
are bound before encoders, so that imx_drm_encoder_parse_of can be
called from the encoder bind callbacks.
For parsing the OF graph, temporary copies of the V4L2 OF graph
helpers are used, that can be removed again once those are available
at a generic place.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/staging/imx-drm/imx-drm-core.c | 203 ++++++++++++++++++++++-----------
drivers/staging/imx-drm/imx-drm.h | 5 +-
drivers/staging/imx-drm/imx-hdmi.c | 2 +-
drivers/staging/imx-drm/imx-ldb.c | 4 +-
drivers/staging/imx-drm/ipuv3-crtc.c | 47 ++++++--
5 files changed, 185 insertions(+), 76 deletions(-)
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index 98a97a2..92246d9 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -30,6 +30,11 @@
struct imx_drm_crtc;
+struct imx_drm_component {
+ struct device_node *of_node;
+ struct list_head list;
+};
+
struct imx_drm_device {
struct drm_device *drm;
struct imx_drm_crtc *crtc[MAX_CRTC];
@@ -41,9 +46,7 @@ struct imx_drm_crtc {
struct drm_crtc *crtc;
int pipe;
struct imx_drm_crtc_helper_funcs imx_drm_helper_funcs;
- void *cookie;
- int id;
- int mux_id;
+ struct device_node *port;
};
static int legacyfb_depth = 16;
@@ -341,14 +344,11 @@ err_kms:
/*
* imx_drm_add_crtc - add a new crtc
- *
- * The return value if !NULL is a cookie for the caller to pass to
- * imx_drm_remove_crtc later.
*/
int imx_drm_add_crtc(struct drm_device *drm, struct drm_crtc *crtc,
struct imx_drm_crtc **new_crtc,
const struct imx_drm_crtc_helper_funcs *imx_drm_helper_funcs,
- void *cookie, int id)
+ struct device_node *port)
{
struct imx_drm_device *imxdrm = drm->dev_private;
struct imx_drm_crtc *imx_drm_crtc;
@@ -370,9 +370,7 @@ int imx_drm_add_crtc(struct drm_device *drm, struct drm_crtc *crtc,
imx_drm_crtc->imx_drm_helper_funcs = *imx_drm_helper_funcs;
imx_drm_crtc->pipe = imxdrm->pipes++;
- imx_drm_crtc->cookie = cookie;
- imx_drm_crtc->id = id;
- imx_drm_crtc->mux_id = imx_drm_crtc->pipe;
+ imx_drm_crtc->port = port;
imx_drm_crtc->crtc = crtc;
imxdrm->crtc[imx_drm_crtc->pipe] = imx_drm_crtc;
@@ -416,21 +414,26 @@ int imx_drm_remove_crtc(struct imx_drm_crtc *imx_drm_crtc)
EXPORT_SYMBOL_GPL(imx_drm_remove_crtc);
/*
- * Find the DRM CRTC possible mask for the device node cookie/id.
+ * Find the DRM CRTC possible mask for the connected endpoint.
*
* The encoder possible masks are defined by their position in the
* mode_config crtc_list. This means that CRTCs must not be added
* or removed once the DRM device has been fully initialised.
*/
static uint32_t imx_drm_find_crtc_mask(struct imx_drm_device *imxdrm,
- void *cookie, int id)
+ struct device_node *endpoint)
{
+ struct device_node *port;
unsigned i;
+ port = imx_drm_of_get_remote_port(endpoint);
+ if (!port)
+ return 0;
+ of_node_put(port);
+
for (i = 0; i < MAX_CRTC; i++) {
struct imx_drm_crtc *imx_drm_crtc = imxdrm->crtc[i];
- if (imx_drm_crtc && imx_drm_crtc->id == id &&
- imx_drm_crtc->cookie == cookie)
+ if (imx_drm_crtc && imx_drm_crtc->port == port)
return drm_crtc_mask(imx_drm_crtc->crtc);
}
@@ -441,26 +444,20 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
struct drm_encoder *encoder, struct device_node *np)
{
struct imx_drm_device *imxdrm = drm->dev_private;
+ struct device_node *ep = NULL;
uint32_t crtc_mask = 0;
- int i, ret = 0;
-
- for (i = 0; !ret; i++) {
- struct of_phandle_args args;
- uint32_t mask;
- int id;
+ int i;
- ret = of_parse_phandle_with_args(np, "crtcs", "#crtc-cells", i,
- &args);
- if (ret == -ENOENT)
+ for (i = 0; ; i++) {
+ ep = imx_drm_of_get_next_endpoint(np, ep);
+ if (!ep)
break;
- if (ret < 0)
- return ret;
- id = args.args_count > 0 ? args.args[0] : 0;
- crtc_mask |= imx_drm_find_crtc_mask(imxdrm, args.np, id);
- of_node_put(args.np);
+ crtc_mask |= imx_drm_find_crtc_mask(imxdrm, ep);
}
+ if (ep)
+ of_node_put(ep);
if (i == 0 || !crtc_mask)
return -ENOENT;
@@ -473,11 +470,36 @@ int imx_drm_encoder_parse_of(struct drm_device *drm,
}
EXPORT_SYMBOL_GPL(imx_drm_encoder_parse_of);
-int imx_drm_encoder_get_mux_id(struct drm_encoder *encoder)
+/*
+ * @node: device tree node containing encoder input ports
+ * @encoder: drm_encoder
+ */
+int imx_drm_encoder_get_mux_id(struct device_node *node,
+ struct drm_encoder *encoder)
{
struct imx_drm_crtc *imx_crtc = imx_drm_find_crtc(encoder->crtc);
+ struct device_node *ep = NULL;
+ struct device_node *port;
+ int id, ret;
+
+ if (!node || !imx_crtc)
+ return -EINVAL;
+
+ do {
+ ep = imx_drm_of_get_next_endpoint(node, ep);
+ if (!ep)
+ break;
- return imx_crtc ? imx_crtc->mux_id : -EINVAL;
+ port = imx_drm_of_get_remote_port(ep);
+ of_node_put(port);
+ if (port == imx_crtc->port) {
+ ret = of_property_read_u32(ep->parent, "reg", &id);
+ of_node_put(ep);
+ return ret ? ret : id;
+ }
+ } while (ep);
+
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(imx_drm_encoder_get_mux_id);
@@ -520,48 +542,29 @@ static struct drm_driver imx_drm_driver = {
.patchlevel = 0,
};
-static int compare_parent_of(struct device *dev, void *data)
-{
- struct of_phandle_args *args = data;
- return dev->parent && dev->parent->of_node == args->np;
-}
-
static int compare_of(struct device *dev, void *data)
{
- return dev->of_node == data;
-}
-
-static int imx_drm_add_components(struct device *master, struct master *m)
-{
- struct device_node *np = master->of_node;
- unsigned i;
- int ret;
-
- for (i = 0; ; i++) {
- struct of_phandle_args args;
+ struct device_node *np = data;
- ret = of_parse_phandle_with_fixed_args(np, "crtcs", 1,
- i, &args);
- if (ret)
- break;
-
- ret = component_master_add_child(m, compare_parent_of, &args);
- of_node_put(args.np);
-
- if (ret)
- return ret;
+ /* Special case for LDB, one device for two channels */
+ if (of_node_cmp(np->name, "lvds-channel") == 0) {
+ np = of_get_parent(np);
+ of_node_put(np);
}
- for (i = 0; ; i++) {
- struct device_node *node;
+ return dev->of_node == np;
+}
- node = of_parse_phandle(np, "connectors", i);
- if (!node)
- break;
+static LIST_HEAD(imx_drm_components);
- ret = component_master_add_child(m, compare_of, node);
- of_node_put(node);
+static int imx_drm_add_components(struct device *master, struct master *m)
+{
+ struct imx_drm_component *component;
+ int ret;
+ list_for_each_entry(component, &imx_drm_components, list) {
+ ret = component_master_add_child(m, compare_of,
+ component->of_node);
if (ret)
return ret;
}
@@ -584,9 +587,81 @@ static const struct component_master_ops imx_drm_ops = {
.unbind = imx_drm_unbind,
};
+static struct imx_drm_component *imx_drm_find_component(struct device *dev,
+ struct device_node *node)
+{
+ struct imx_drm_component *component;
+
+ list_for_each_entry(component, &imx_drm_components, list)
+ if (component->of_node == node)
+ return component;
+
+ return NULL;
+}
+
+static int imx_drm_add_component(struct device *dev, struct device_node *node)
+{
+ struct imx_drm_component *component;
+
+ if (imx_drm_find_component(dev, node))
+ return 0;
+
+ component = devm_kzalloc(dev, sizeof(*component), GFP_KERNEL);
+ if (!component)
+ return -ENOMEM;
+
+ component->of_node = node;
+ list_add_tail(&component->list, &imx_drm_components);
+
+ return 0;
+}
+
static int imx_drm_platform_probe(struct platform_device *pdev)
{
+ struct device_node *ep, *port, *remote;
int ret;
+ int i;
+
+ /*
+ * Bind the IPU display interface ports first, so that
+ * imx_drm_encoder_parse_of called from encoder .bind callbacks
+ * works as expected.
+ */
+ for (i = 0; ; i++) {
+ port = of_parse_phandle(pdev->dev.of_node, "ports", i);
+ if (!port)
+ break;
+
+ ret = imx_drm_add_component(&pdev->dev, port);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (i == 0) {
+ dev_err(&pdev->dev, "missing 'ports' property\n");
+ return -ENODEV;
+ }
+
+ /* Then bind all encoders */
+ for (i = 0; ; i++) {
+ port = of_parse_phandle(pdev->dev.of_node, "ports", i);
+ if (!port)
+ break;
+
+ for_each_child_of_node(port, ep) {
+ remote = imx_drm_of_get_remote_port_parent(ep);
+ if (!remote || !of_device_is_available(remote)) {
+ of_node_put(remote);
+ continue;
+ }
+
+ ret = imx_drm_add_component(&pdev->dev, remote);
+ of_node_put(remote);
+ if (ret < 0)
+ return ret;
+ }
+ of_node_put(port);
+ }
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
diff --git a/drivers/staging/imx-drm/imx-drm.h b/drivers/staging/imx-drm/imx-drm.h
index 793a80b..447ddd7 100644
--- a/drivers/staging/imx-drm/imx-drm.h
+++ b/drivers/staging/imx-drm/imx-drm.h
@@ -30,7 +30,7 @@ struct imx_drm_crtc_helper_funcs {
int imx_drm_add_crtc(struct drm_device *drm, struct drm_crtc *crtc,
struct imx_drm_crtc **new_crtc,
const struct imx_drm_crtc_helper_funcs *imx_helper_funcs,
- void *cookie, int id);
+ struct device_node *port);
int imx_drm_remove_crtc(struct imx_drm_crtc *);
int imx_drm_init_drm(struct platform_device *pdev,
int preferred_bpp);
@@ -49,7 +49,8 @@ int imx_drm_panel_format_pins(struct drm_encoder *encoder,
int imx_drm_panel_format(struct drm_encoder *encoder,
u32 interface_pix_fmt);
-int imx_drm_encoder_get_mux_id(struct drm_encoder *encoder);
+int imx_drm_encoder_get_mux_id(struct device_node *node,
+ struct drm_encoder *encoder);
int imx_drm_encoder_parse_of(struct drm_device *drm,
struct drm_encoder *encoder, struct device_node *np);
diff --git a/drivers/staging/imx-drm/imx-hdmi.c b/drivers/staging/imx-drm/imx-hdmi.c
index a677e33..8509814 100644
--- a/drivers/staging/imx-drm/imx-hdmi.c
+++ b/drivers/staging/imx-drm/imx-hdmi.c
@@ -1453,7 +1453,7 @@ static void imx_hdmi_encoder_prepare(struct drm_encoder *encoder)
static void imx_hdmi_encoder_commit(struct drm_encoder *encoder)
{
struct imx_hdmi *hdmi = container_of(encoder, struct imx_hdmi, encoder);
- int mux = imx_drm_encoder_get_mux_id(encoder);
+ int mux = imx_drm_encoder_get_mux_id(hdmi->dev->of_node, encoder);
imx_hdmi_set_ipu_di_mux(hdmi, mux);
diff --git a/drivers/staging/imx-drm/imx-ldb.c b/drivers/staging/imx-drm/imx-ldb.c
index 5168c76..301c430 100644
--- a/drivers/staging/imx-drm/imx-ldb.c
+++ b/drivers/staging/imx-drm/imx-ldb.c
@@ -168,7 +168,7 @@ static void imx_ldb_encoder_prepare(struct drm_encoder *encoder)
u32 pixel_fmt;
unsigned long serial_clk;
unsigned long di_clk = mode->clock * 1000;
- int mux = imx_drm_encoder_get_mux_id(encoder);
+ int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->child, encoder);
if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) {
/* dual channel LVDS mode */
@@ -203,7 +203,7 @@ static void imx_ldb_encoder_commit(struct drm_encoder *encoder)
struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
struct imx_ldb *ldb = imx_ldb_ch->ldb;
int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
- int mux = imx_drm_encoder_get_mux_id(encoder);
+ int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->child, encoder);
if (dual) {
clk_prepare_enable(ldb->clk[0]);
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index e646017..a8d0178 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -350,10 +350,8 @@ static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
return ret;
}
- ret = imx_drm_add_crtc(drm, &ipu_crtc->base,
- &ipu_crtc->imx_crtc,
- &ipu_crtc_helper_funcs,
- ipu_crtc->dev->parent->of_node, pdata->di);
+ ret = imx_drm_add_crtc(drm, &ipu_crtc->base, &ipu_crtc->imx_crtc,
+ &ipu_crtc_helper_funcs, ipu_crtc->dev->of_node);
if (ret) {
dev_err(ipu_crtc->dev, "adding crtc failed with %d.\n", ret);
goto err_put_resources;
@@ -401,6 +399,28 @@ err_put_resources:
return ret;
}
+static struct device_node *ipu_drm_get_port_by_id(struct device_node *parent,
+ int port_id)
+{
+ struct device_node *port;
+ int id, ret;
+
+ port = of_get_child_by_name(parent, "port");
+ while (port) {
+ ret = of_property_read_u32(port, "reg", &id);
+ if (!ret && id == port_id)
+ return port;
+
+ do {
+ port = of_get_next_child(parent, port);
+ if (!port)
+ return NULL;
+ } while (of_node_cmp(port->name, "port"));
+ }
+
+ return NULL;
+}
+
static int ipu_drm_bind(struct device *dev, struct device *master, void *data)
{
struct ipu_client_platformdata *pdata = dev->platform_data;
@@ -441,16 +461,29 @@ static const struct component_ops ipu_crtc_ops = {
static int ipu_drm_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct ipu_client_platformdata *pdata = dev->platform_data;
int ret;
- if (!pdev->dev.platform_data)
+ if (!dev->platform_data)
return -EINVAL;
- ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (!dev->of_node) {
+ /* Associate crtc device with the corresponding DI port node */
+ dev->of_node = ipu_drm_get_port_by_id(dev->parent->of_node,
+ pdata->di + 2);
+ if (!dev->of_node) {
+ dev_err(dev, "missing port@%d node in %s\n",
+ pdata->di + 2, dev->parent->of_node->full_name);
+ return -ENODEV;
+ }
+ }
+
+ ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
- return component_add(&pdev->dev, &ipu_crtc_ops);
+ return component_add(dev, &ipu_crtc_ops);
}
static int ipu_drm_remove(struct platform_device *pdev)
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 4/9] staging: imx-drm: Document updated imx-drm device tree bindings
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Philipp Zabel, David Airlie,
Greg Kroah-Hartman, dri-devel, kernel, Grant Likely, Shawn Guo,
linux-arm-kernel
This patch updates the device tree binding documentation for i.MX IPU/display
nodes using the OF graph bindings documented in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 48 +++++++++++++++++++---
.../devicetree/bindings/staging/imx-drm/ldb.txt | 20 +++++++--
2 files changed, 59 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index b876d49..bfa19a4 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -1,3 +1,22 @@
+Freescale i.MX DRM master device
+================================
+
+The freescale i.MX DRM master device is a virtual device needed to list all
+IPU or other display interface nodes that comprise the graphics subsystem.
+
+Required properties:
+- compatible: Should be "fsl,imx-drm"
+- ports: Should contain a list of phandles pointing to display interface ports
+ of IPU devices
+
+example:
+
+imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu_di0>;
+};
+
+
Freescale i.MX IPUv3
====================
@@ -7,18 +26,31 @@ Required properties:
datasheet
- interrupts: Should contain sync interrupt and error interrupt,
in this order.
-- #crtc-cells: 1, See below
- resets: phandle pointing to the system reset controller and
reset line index, see reset/fsl,imx-src.txt for details
+Optional properties:
+- port@[0-3]: Port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Ports 0 and 1 should correspond to CSI0 and CSI1,
+ ports 2 and 3 should correspond to DI0 and DI1, respectively.
example:
ipu: ipu@18000000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
resets = <&src 2>;
+
+ ipu_di0: port@2 {
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint {
+ remote-endpoint = <&display_in>;
+ };
+ };
};
Parallel display support
@@ -26,19 +58,25 @@ Parallel display support
Required properties:
- compatible: Should be "fsl,imx-parallel-display"
-- crtc: the crtc this display is connected to, see below
Optional properties:
- interface_pix_fmt: How this display is connected to the
- crtc. Currently supported types: "rgb24", "rgb565", "bgr666"
+ display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
- edid: verbatim EDID data block describing attached display.
- ddc: phandle describing the i2c bus handling the display data
channel
+- port: A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
example:
display@di0 {
compatible = "fsl,imx-parallel-display";
edid = [edid-data];
- crtc = <&ipu 0>;
interface-pix-fmt = "rgb24";
+
+ port {
+ display_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
index ed93778..578a1fc 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@@ -50,12 +50,14 @@ have a look at Documentation/devicetree/bindings/video/display-timing.txt.
Required properties:
- reg : should be <0> or <1>
- - crtcs : a list of phandles with index pointing to the IPU display interfaces
- that can be used as video source for this channel.
- fsl,data-mapping : should be "spwg" or "jeida"
This describes how the color bits are laid out in the
serialized LVDS signal.
- fsl,data-width : should be <18> or <24>
+ - port: A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ On i.MX6, there should be four ports (port@[0-3]) that correspond
+ to the four LVDS multiplexer inputs.
example:
@@ -77,23 +79,33 @@ ldb: ldb@53fa8008 {
lvds-channel@0 {
reg = <0>;
- crtcs = <&ipu 0>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
display-timings {
/* ... */
};
+
+ port {
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
};
lvds-channel@1 {
reg = <1>;
- crtcs = <&ipu 1>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
display-timings {
/* ... */
};
+
+ port {
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di1_lvds1>;
+ };
+ };
};
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 4/9] staging: imx-drm: Document updated imx-drm device tree bindings
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
This patch updates the device tree binding documentation for i.MX IPU/display
nodes using the OF graph bindings documented in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 48 +++++++++++++++++++---
.../devicetree/bindings/staging/imx-drm/ldb.txt | 20 +++++++--
2 files changed, 59 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index b876d49..bfa19a4 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -1,3 +1,22 @@
+Freescale i.MX DRM master device
+================================
+
+The freescale i.MX DRM master device is a virtual device needed to list all
+IPU or other display interface nodes that comprise the graphics subsystem.
+
+Required properties:
+- compatible: Should be "fsl,imx-drm"
+- ports: Should contain a list of phandles pointing to display interface ports
+ of IPU devices
+
+example:
+
+imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu_di0>;
+};
+
+
Freescale i.MX IPUv3
====================
@@ -7,18 +26,31 @@ Required properties:
datasheet
- interrupts: Should contain sync interrupt and error interrupt,
in this order.
-- #crtc-cells: 1, See below
- resets: phandle pointing to the system reset controller and
reset line index, see reset/fsl,imx-src.txt for details
+Optional properties:
+- port@[0-3]: Port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Ports 0 and 1 should correspond to CSI0 and CSI1,
+ ports 2 and 3 should correspond to DI0 and DI1, respectively.
example:
ipu: ipu at 18000000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
resets = <&src 2>;
+
+ ipu_di0: port at 2 {
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint {
+ remote-endpoint = <&display_in>;
+ };
+ };
};
Parallel display support
@@ -26,19 +58,25 @@ Parallel display support
Required properties:
- compatible: Should be "fsl,imx-parallel-display"
-- crtc: the crtc this display is connected to, see below
Optional properties:
- interface_pix_fmt: How this display is connected to the
- crtc. Currently supported types: "rgb24", "rgb565", "bgr666"
+ display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
- edid: verbatim EDID data block describing attached display.
- ddc: phandle describing the i2c bus handling the display data
channel
+- port: A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
example:
display at di0 {
compatible = "fsl,imx-parallel-display";
edid = [edid-data];
- crtc = <&ipu 0>;
interface-pix-fmt = "rgb24";
+
+ port {
+ display_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
index ed93778..578a1fc 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@@ -50,12 +50,14 @@ have a look at Documentation/devicetree/bindings/video/display-timing.txt.
Required properties:
- reg : should be <0> or <1>
- - crtcs : a list of phandles with index pointing to the IPU display interfaces
- that can be used as video source for this channel.
- fsl,data-mapping : should be "spwg" or "jeida"
This describes how the color bits are laid out in the
serialized LVDS signal.
- fsl,data-width : should be <18> or <24>
+ - port: A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ On i.MX6, there should be four ports (port@[0-3]) that correspond
+ to the four LVDS multiplexer inputs.
example:
@@ -77,23 +79,33 @@ ldb: ldb at 53fa8008 {
lvds-channel at 0 {
reg = <0>;
- crtcs = <&ipu 0>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
display-timings {
/* ... */
};
+
+ port {
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
};
lvds-channel at 1 {
reg = <1>;
- crtcs = <&ipu 1>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
display-timings {
/* ... */
};
+
+ port {
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di1_lvds1>;
+ };
+ };
};
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 5/9] staging: imx-drm: Document imx-hdmi device tree bindings
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Philipp Zabel, David Airlie,
Greg Kroah-Hartman, dri-devel, kernel, Grant Likely, Shawn Guo,
linux-arm-kernel
This patch adds device tree binding documentation for the HDMI transmitter
on i.MX6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
.../devicetree/bindings/staging/imx-drm/hdmi.txt | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt b/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
new file mode 100644
index 0000000..7dcd673a
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
@@ -0,0 +1,53 @@
+Device-Tree bindings for HDMI Transmitter
+
+HDMI Transmitter
+================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
+ - gpr : should be <&gpr>.
+ The phandle points to the iomuxc-gpr region containing the HDMI
+ multiplexer control register.
+ - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
+ in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+ Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt,
+ corresponding to the four inputs to the HDMI multiplexer.
+
+example:
+
+ gpr: iomuxc-gpr@020e0000 {
+ /* ... */
+ };
+
+ hdmi: hdmi@0120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00120000 0x9000>;
+ interrupts = <0 115 0x04>;
+ gpr = <&gpr>;
+ clocks = <&clks 123>, <&clks 124>;
+ clock-names = "iahb", "isfr";
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
+ };
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 5/9] staging: imx-drm: Document imx-hdmi device tree bindings
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds device tree binding documentation for the HDMI transmitter
on i.MX6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
.../devicetree/bindings/staging/imx-drm/hdmi.txt | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt b/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
new file mode 100644
index 0000000..7dcd673a
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
@@ -0,0 +1,53 @@
+Device-Tree bindings for HDMI Transmitter
+
+HDMI Transmitter
+================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
+ - gpr : should be <&gpr>.
+ The phandle points to the iomuxc-gpr region containing the HDMI
+ multiplexer control register.
+ - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
+ in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+ Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt,
+ corresponding to the four inputs to the HDMI multiplexer.
+
+example:
+
+ gpr: iomuxc-gpr at 020e0000 {
+ /* ... */
+ };
+
+ hdmi: hdmi at 0120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00120000 0x9000>;
+ interrupts = <0 115 0x04>;
+ gpr = <&gpr>;
+ clocks = <&clks 123>, <&clks 124>;
+ clock-names = "iahb", "isfr";
+
+ port at 0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
+ };
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 6/9] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: David Airlie, Greg Kroah-Hartman, Shawn Guo, Fabio Estevam,
Grant Likely, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel
This patch connects IPU and and parallel display device tree
nodes using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt
The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.
Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and panels have to be added.
Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/boot/dts/imx51-apf51dev.dts | 11 ++++++++++-
arch/arm/boot/dts/imx51-babbage.dts | 28 ++++++++++++++++++++--------
arch/arm/boot/dts/imx51.dtsi | 22 +++++++++++++++++++++-
3 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 5a7f552..d3f9814 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -18,7 +18,6 @@
display@di1 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
@@ -41,6 +40,12 @@
pixelclk-active = <0>;
};
};
+
+ port {
+ display_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
gpio-keys {
@@ -122,3 +127,7 @@
};
};
};
+
+&ipu_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6ff15a0..6719271 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -23,7 +23,6 @@
display0: display@di0 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
@@ -41,11 +40,16 @@
vsync-len = <10>;
};
};
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 1>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
@@ -68,6 +72,12 @@
pixelclk-active = <0>;
};
};
+
+ port {
+ display1_in: endpoint {
+ remote-endpoint = <&ipu_di1_disp1>;
+ };
+ };
};
gpio-keys {
@@ -81,12 +91,6 @@
};
};
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 0>, <&ipu 1>;
- connectors = <&display0>, <&display1>;
- };
-
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -264,6 +268,14 @@
};
};
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp1 {
+ remote-endpoint = <&display1_in>;
+};
+
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 4bcdd3a..536644c 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -79,6 +79,11 @@
};
};
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu_di0>, <&ipu_di1>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -92,13 +97,28 @@
};
ipu: ipu@40000000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx51-ipu";
reg = <0x40000000 0x20000000>;
interrupts = <11 10>;
clocks = <&clks 59>, <&clks 110>, <&clks 61>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
+
+ ipu_di0: port@2 {
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint {
+ };
+ };
+
+ ipu_di1: port@3 {
+ reg = <3>;
+
+ ipu_di1_disp1: endpoint {
+ };
+ };
};
aips@70000000 { /* AIPS1 */
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 6/9] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
This patch connects IPU and and parallel display device tree
nodes using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt
The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.
Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and panels have to be added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/imx51-apf51dev.dts | 11 ++++++++++-
arch/arm/boot/dts/imx51-babbage.dts | 28 ++++++++++++++++++++--------
arch/arm/boot/dts/imx51.dtsi | 22 +++++++++++++++++++++-
3 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 5a7f552..d3f9814 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -18,7 +18,6 @@
display at di1 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
@@ -41,6 +40,12 @@
pixelclk-active = <0>;
};
};
+
+ port {
+ display_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
gpio-keys {
@@ -122,3 +127,7 @@
};
};
};
+
+&ipu_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 6ff15a0..6719271 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -23,7 +23,6 @@
display0: display at di0 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp1_1>;
@@ -41,11 +40,16 @@
vsync-len = <10>;
};
};
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
display1: display at di1 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 1>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
@@ -68,6 +72,12 @@
pixelclk-active = <0>;
};
};
+
+ port {
+ display1_in: endpoint {
+ remote-endpoint = <&ipu_di1_disp1>;
+ };
+ };
};
gpio-keys {
@@ -81,12 +91,6 @@
};
};
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 0>, <&ipu 1>;
- connectors = <&display0>, <&display1>;
- };
-
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -264,6 +268,14 @@
};
};
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp1 {
+ remote-endpoint = <&display1_in>;
+};
+
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 4bcdd3a..536644c 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -79,6 +79,11 @@
};
};
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu_di0>, <&ipu_di1>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -92,13 +97,28 @@
};
ipu: ipu at 40000000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx51-ipu";
reg = <0x40000000 0x20000000>;
interrupts = <11 10>;
clocks = <&clks 59>, <&clks 110>, <&clks 61>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
+
+ ipu_di0: port at 2 {
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint {
+ };
+ };
+
+ ipu_di1: port at 3 {
+ reg = <3>;
+
+ ipu_di1_disp1: endpoint {
+ };
+ };
};
aips at 70000000 { /* AIPS1 */
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 7/9] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Greg Kroah-Hartman, dri-devel, kernel,
Grant Likely, linux-arm-kernel
This patch connects IPU and display encoder (VGA, LVDS)
device tree nodes, as well as parallel displays on the DISP0
and DISP1 outputs, using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt
The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.
Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and encoders or panels have to be added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/imx53-m53evk.dts | 17 +++++-----
arch/arm/boot/dts/imx53-mba53.dts | 15 +++++----
arch/arm/boot/dts/imx53-qsb.dts | 17 +++++-----
arch/arm/boot/dts/imx53.dtsi | 64 +++++++++++++++++++++++++++++++++++---
4 files changed, 89 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index ee6107b..0298adc 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -23,7 +23,6 @@
soc {
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 1>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
@@ -44,6 +43,12 @@
};
};
};
+
+ port {
+ display1_in: endpoint {
+ remote-endpoint = <&ipu_di1_disp1>;
+ };
+ };
};
backlight {
@@ -53,12 +58,6 @@
default-brightness-level = <6>;
};
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 1>;
- connectors = <&display1>;
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -227,6 +226,10 @@
};
};
+&ipu_di1_disp1 {
+ remote-endpoint = <&display1_in>;
+};
+
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand_1>;
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 9b6e769..3c3d69e 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -38,15 +38,14 @@
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp1_1>;
- crtcs = <&ipu 1>;
interface-pix-fmt = "rgb24";
status = "disabled";
- };
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 1>;
- connectors = <&disp1>, <&tve>;
+ port {
+ display1_in: endpoint {
+ remote-endpoint = <&ipu_di1_disp1>;
+ };
+ };
};
reg_3p2v: 3p2v {
@@ -147,6 +146,10 @@
};
};
+&ipu_di1_disp1 {
+ remote-endpoint = <&display1_in>;
+};
+
&cspi {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 3cb4f77..8b25428 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -23,7 +23,6 @@
display0: display@di0 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp0_1>;
@@ -46,6 +45,12 @@
pixelclk-active = <0>;
};
};
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
gpio-keys {
@@ -72,12 +77,6 @@
};
};
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 0>;
- connectors = <&display0>;
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -132,6 +131,10 @@
status = "okay";
};
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80..5b89b91 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -45,6 +45,11 @@
};
};
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu_di0>, <&ipu_di1>;
+ };
+
tzic: tz-interrupt-controller@0fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
@@ -85,13 +90,49 @@
ranges;
ipu: ipu@18000000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
clocks = <&clks 59>, <&clks 110>, <&clks 61>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
+
+ ipu_di0: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint@0 {
+ reg = <0>;
+ };
+
+ ipu_di0_lvds0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+
+ ipu_di1: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu_di1_disp1: endpoint@0 {
+ reg = <0>;
+ };
+
+ ipu_di1_lvds1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&lvds1_in>;
+ };
+
+ ipu_di1_tve: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tve_in>;
+ };
+ };
};
aips@50000000 { /* AIPS1 */
@@ -838,14 +879,24 @@
lvds-channel@0 {
reg = <0>;
- crtcs = <&ipu 0>;
status = "disabled";
+
+ port {
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
};
lvds-channel@1 {
reg = <1>;
- crtcs = <&ipu 1>;
status = "disabled";
+
+ port {
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
};
};
@@ -1103,8 +1154,13 @@
interrupts = <92>;
clocks = <&clks 69>, <&clks 116>;
clock-names = "tve", "di_sel";
- crtcs = <&ipu 1>;
status = "disabled";
+
+ port {
+ tve_in: endpoint {
+ remote-endpoint = <&ipu_di1_tve>;
+ };
+ };
};
vpu: vpu@63ff4000 {
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 7/9] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
This patch connects IPU and display encoder (VGA, LVDS)
device tree nodes, as well as parallel displays on the DISP0
and DISP1 outputs, using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt
The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.
Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and encoders or panels have to be added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/imx53-m53evk.dts | 17 +++++-----
arch/arm/boot/dts/imx53-mba53.dts | 15 +++++----
arch/arm/boot/dts/imx53-qsb.dts | 17 +++++-----
arch/arm/boot/dts/imx53.dtsi | 64 +++++++++++++++++++++++++++++++++++---
4 files changed, 89 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index ee6107b..0298adc 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -23,7 +23,6 @@
soc {
display1: display at di1 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 1>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp2_1>;
@@ -44,6 +43,12 @@
};
};
};
+
+ port {
+ display1_in: endpoint {
+ remote-endpoint = <&ipu_di1_disp1>;
+ };
+ };
};
backlight {
@@ -53,12 +58,6 @@
default-brightness-level = <6>;
};
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 1>;
- connectors = <&display1>;
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -227,6 +226,10 @@
};
};
+&ipu_di1_disp1 {
+ remote-endpoint = <&display1_in>;
+};
+
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand_1>;
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 9b6e769..3c3d69e 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -38,15 +38,14 @@
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp1_1>;
- crtcs = <&ipu 1>;
interface-pix-fmt = "rgb24";
status = "disabled";
- };
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 1>;
- connectors = <&disp1>, <&tve>;
+ port {
+ display1_in: endpoint {
+ remote-endpoint = <&ipu_di1_disp1>;
+ };
+ };
};
reg_3p2v: 3p2v {
@@ -147,6 +146,10 @@
};
};
+&ipu_di1_disp1 {
+ remote-endpoint = <&display1_in>;
+};
+
&cspi {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 3cb4f77..8b25428 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -23,7 +23,6 @@
display0: display at di0 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp0_1>;
@@ -46,6 +45,12 @@
pixelclk-active = <0>;
};
};
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
};
gpio-keys {
@@ -72,12 +77,6 @@
};
};
- imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu 0>;
- connectors = <&display0>;
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -132,6 +131,10 @@
status = "okay";
};
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
&ssi2 {
fsl,mode = "i2s-slave";
status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80..5b89b91 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -45,6 +45,11 @@
};
};
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu_di0>, <&ipu_di1>;
+ };
+
tzic: tz-interrupt-controller at 0fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
@@ -85,13 +90,49 @@
ranges;
ipu: ipu at 18000000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
clocks = <&clks 59>, <&clks 110>, <&clks 61>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
+
+ ipu_di0: port at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint at 0 {
+ reg = <0>;
+ };
+
+ ipu_di0_lvds0: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+
+ ipu_di1: port at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu_di1_disp1: endpoint at 0 {
+ reg = <0>;
+ };
+
+ ipu_di1_lvds1: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&lvds1_in>;
+ };
+
+ ipu_di1_tve: endpoint at 2 {
+ reg = <2>;
+ remote-endpoint = <&tve_in>;
+ };
+ };
};
aips at 50000000 { /* AIPS1 */
@@ -838,14 +879,24 @@
lvds-channel at 0 {
reg = <0>;
- crtcs = <&ipu 0>;
status = "disabled";
+
+ port {
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
};
lvds-channel at 1 {
reg = <1>;
- crtcs = <&ipu 1>;
status = "disabled";
+
+ port {
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
};
};
@@ -1103,8 +1154,13 @@
interrupts = <92>;
clocks = <&clks 69>, <&clks 116>;
clock-names = "tve", "di_sel";
- crtcs = <&ipu 1>;
status = "disabled";
+
+ port {
+ tve_in: endpoint {
+ remote-endpoint = <&ipu_di1_tve>;
+ };
+ };
};
vpu: vpu at 63ff4000 {
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 8/9] ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Greg Kroah-Hartman, dri-devel, kernel,
Grant Likely, linux-arm-kernel
This patch connects IPU and display encoder (HDMI, LVDS, MIPI)
device tree nodes, as well as parallel displays on the DISP0
and DISP1 outputs, using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt
The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.
Each encoder with an associated input multiplexer has multiple
input ports in the device tree. The order and reg property of
the ports must correspond to the multiplexer input order.
Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and encoders or panels have to be added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/imx6dl.dtsi | 22 +++---
arch/arm/boot/dts/imx6q-sabresd.dts | 4 -
arch/arm/boot/dts/imx6q.dtsi | 124 +++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 --
arch/arm/boot/dts/imx6qdl.dtsi | 138 ++++++++++++++++++++++++++++++++-
5 files changed, 263 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 6dc3970..8ba94b8 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -70,6 +70,15 @@
};
};
};
+
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu1_di0>, <&ipu1_di1>;
+ };
+};
+
+&hdmi {
+ compatible = "fsl,imx6dl-hdmi";
};
&ldb {
@@ -79,17 +88,4 @@
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
-
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-
- lvds-channel@1 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-};
-
-&hdmi {
- compatible = "fsl,imx6dl-hdmi";
- crtcs = <&ipu1 0>, <&ipu1 1>;
};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 66f220a..9cbdfe7 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -20,10 +20,6 @@
compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
};
-&imx_drm {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
-};
-
&sata {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 187fe33..db356e6 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -132,13 +132,84 @@
};
ipu2: ipu@02800000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
interrupts = <0 8 0x4 0 7 0x4>;
clocks = <&clks 133>, <&clks 134>, <&clks 137>;
clock-names = "bus", "di0", "di1";
resets = <&src 4>;
+
+ ipu2_di0: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu2_di0_disp0: endpoint@0 {
+ };
+
+ ipu2_di0_hdmi: endpoint@1 {
+ remote-endpoint = <&hdmi_mux_2>;
+ };
+
+ ipu2_di0_mipi: endpoint@2 {
+ };
+
+ ipu2_di0_lvds0: endpoint@3 {
+ remote-endpoint = <&lvds0_mux_2>;
+ };
+
+ ipu2_di0_lvds1: endpoint@4 {
+ remote-endpoint = <&lvds1_mux_2>;
+ };
+ };
+
+ ipu2_di1: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu2_di1_hdmi: endpoint@1 {
+ remote-endpoint = <&hdmi_mux_3>;
+ };
+
+ ipu2_di1_mipi: endpoint@2 {
+ };
+
+ ipu2_di1_lvds0: endpoint@3 {
+ remote-endpoint = <&lvds0_mux_3>;
+ };
+
+ ipu2_di1_lvds1: endpoint@4 {
+ remote-endpoint = <&lvds1_mux_3>;
+ };
+ };
+ };
+ };
+
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
+ };
+};
+
+&hdmi {
+ compatible = "fsl,imx6q-hdmi";
+
+ port@2 {
+ reg = <2>;
+
+ hdmi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_hdmi>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ hdmi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_hdmi>;
};
};
};
@@ -152,15 +223,56 @@
"di0", "di1";
lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+ port@2 {
+ reg = <2>;
+
+ lvds0_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_lvds0>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ lvds0_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_lvds0>;
+ };
+ };
};
lvds-channel@1 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+ port@2 {
+ reg = <2>;
+
+ lvds1_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_lvds1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ lvds1_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_lvds1>;
+ };
+ };
};
};
-&hdmi {
- compatible = "fsl,imx6q-hdmi";
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+&mipi_dsi {
+ port@2 {
+ reg = <2>;
+
+ mipi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_mipi>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ mipi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_mipi>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index dfca3e0..e75e11b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -62,12 +62,6 @@
};
};
- imx_drm: imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu1 0>, <&ipu1 1>;
- connectors = <&ldb>;
- };
-
sound {
compatible = "fsl,imx6q-sabresd-wm8962",
"fsl,imx-audio-wm8962";
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 930ebe0..368168c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1358,23 +1358,87 @@
status = "disabled";
lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ lvds0_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds0_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_lvds0>;
+ };
+ };
+
+ port@4 {
+ lvds0: endpoint {
+ };
+ };
};
lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ lvds1_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_lvds1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds1_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_lvds1>;
+ };
+ };
+
+ port@4 {
+ lvds1: endpoint {
+ };
+ };
};
};
hdmi: hdmi@0120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x00120000 0x9000>;
interrupts = <0 115 0x04>;
gpr = <&gpr>;
clocks = <&clks 123>, <&clks 124>;
clock-names = "iahb", "isfr";
status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
};
dcic1: dcic@020e4000 {
@@ -1588,8 +1652,27 @@
reg = <0x021dc000 0x4000>;
};
- mipi@021e0000 { /* MIPI-DSI */
+ mipi_dsi: mipi@021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x021e0000 0x4000>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_mipi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_mipi>;
+ };
+ };
};
vdoa@021e4000 {
@@ -1643,13 +1726,64 @@
};
ipu1: ipu@02400000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx6q-ipu";
reg = <0x02400000 0x400000>;
interrupts = <0 6 0x4 0 5 0x4>;
clocks = <&clks 130>, <&clks 131>, <&clks 132>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
+
+ ipu1_di0: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu1_di0_disp0: endpoint@0 {
+ };
+
+ ipu1_di0_hdmi: endpoint@1 {
+ remote-endpoint = <&hdmi_mux_0>;
+ };
+
+ ipu1_di0_mipi: endpoint@2 {
+ remote-endpoint = <&mipi_mux_0>;
+ };
+
+ ipu1_di0_lvds0: endpoint@3 {
+ remote-endpoint = <&lvds0_mux_0>;
+ };
+
+ ipu1_di0_lvds1: endpoint@4 {
+ remote-endpoint = <&lvds1_mux_0>;
+ };
+ };
+
+ ipu1_di1: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu1_di0_disp1: endpoint@0 {
+ };
+
+ ipu1_di1_hdmi: endpoint@1 {
+ remote-endpoint = <&hdmi_mux_1>;
+ };
+
+ ipu1_di1_mipi: endpoint@2 {
+ remote-endpoint = <&mipi_mux_1>;
+ };
+
+ ipu1_di1_lvds0: endpoint@3 {
+ remote-endpoint = <&lvds0_mux_1>;
+ };
+
+ ipu1_di1_lvds1: endpoint@4 {
+ remote-endpoint = <&lvds1_mux_1>;
+ };
+ };
};
};
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 8/9] ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
This patch connects IPU and display encoder (HDMI, LVDS, MIPI)
device tree nodes, as well as parallel displays on the DISP0
and DISP1 outputs, using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt
The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.
Each encoder with an associated input multiplexer has multiple
input ports in the device tree. The order and reg property of
the ports must correspond to the multiplexer input order.
Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and encoders or panels have to be added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/imx6dl.dtsi | 22 +++---
arch/arm/boot/dts/imx6q-sabresd.dts | 4 -
arch/arm/boot/dts/imx6q.dtsi | 124 +++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 --
arch/arm/boot/dts/imx6qdl.dtsi | 138 ++++++++++++++++++++++++++++++++-
5 files changed, 263 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 6dc3970..8ba94b8 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -70,6 +70,15 @@
};
};
};
+
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu1_di0>, <&ipu1_di1>;
+ };
+};
+
+&hdmi {
+ compatible = "fsl,imx6dl-hdmi";
};
&ldb {
@@ -79,17 +88,4 @@
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
-
- lvds-channel at 0 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-
- lvds-channel at 1 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
-};
-
-&hdmi {
- compatible = "fsl,imx6dl-hdmi";
- crtcs = <&ipu1 0>, <&ipu1 1>;
};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 66f220a..9cbdfe7 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -20,10 +20,6 @@
compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
};
-&imx_drm {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
-};
-
&sata {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 187fe33..db356e6 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -132,13 +132,84 @@
};
ipu2: ipu at 02800000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
interrupts = <0 8 0x4 0 7 0x4>;
clocks = <&clks 133>, <&clks 134>, <&clks 137>;
clock-names = "bus", "di0", "di1";
resets = <&src 4>;
+
+ ipu2_di0: port at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu2_di0_disp0: endpoint at 0 {
+ };
+
+ ipu2_di0_hdmi: endpoint at 1 {
+ remote-endpoint = <&hdmi_mux_2>;
+ };
+
+ ipu2_di0_mipi: endpoint at 2 {
+ };
+
+ ipu2_di0_lvds0: endpoint at 3 {
+ remote-endpoint = <&lvds0_mux_2>;
+ };
+
+ ipu2_di0_lvds1: endpoint at 4 {
+ remote-endpoint = <&lvds1_mux_2>;
+ };
+ };
+
+ ipu2_di1: port at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu2_di1_hdmi: endpoint at 1 {
+ remote-endpoint = <&hdmi_mux_3>;
+ };
+
+ ipu2_di1_mipi: endpoint at 2 {
+ };
+
+ ipu2_di1_lvds0: endpoint at 3 {
+ remote-endpoint = <&lvds0_mux_3>;
+ };
+
+ ipu2_di1_lvds1: endpoint at 4 {
+ remote-endpoint = <&lvds1_mux_3>;
+ };
+ };
+ };
+ };
+
+ imx-drm {
+ compatible = "fsl,imx-drm";
+ ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
+ };
+};
+
+&hdmi {
+ compatible = "fsl,imx6q-hdmi";
+
+ port at 2 {
+ reg = <2>;
+
+ hdmi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_hdmi>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ hdmi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_hdmi>;
};
};
};
@@ -152,15 +223,56 @@
"di0", "di1";
lvds-channel at 0 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+ port at 2 {
+ reg = <2>;
+
+ lvds0_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_lvds0>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ lvds0_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_lvds0>;
+ };
+ };
};
lvds-channel at 1 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+ port at 2 {
+ reg = <2>;
+
+ lvds1_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_lvds1>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ lvds1_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_lvds1>;
+ };
+ };
};
};
-&hdmi {
- compatible = "fsl,imx6q-hdmi";
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+&mipi_dsi {
+ port at 2 {
+ reg = <2>;
+
+ mipi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_mipi>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+
+ mipi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_mipi>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index dfca3e0..e75e11b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -62,12 +62,6 @@
};
};
- imx_drm: imx-drm {
- compatible = "fsl,imx-drm";
- crtcs = <&ipu1 0>, <&ipu1 1>;
- connectors = <&ldb>;
- };
-
sound {
compatible = "fsl,imx6q-sabresd-wm8962",
"fsl,imx-audio-wm8962";
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 930ebe0..368168c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1358,23 +1358,87 @@
status = "disabled";
lvds-channel at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
status = "disabled";
+
+ port at 0 {
+ reg = <0>;
+
+ lvds0_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_lvds0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lvds0_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_lvds0>;
+ };
+ };
+
+ port at 4 {
+ lvds0: endpoint {
+ };
+ };
};
lvds-channel at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
status = "disabled";
+
+ port at 0 {
+ reg = <0>;
+
+ lvds1_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_lvds1>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lvds1_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_lvds1>;
+ };
+ };
+
+ port at 4 {
+ lvds1: endpoint {
+ };
+ };
};
};
hdmi: hdmi at 0120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x00120000 0x9000>;
interrupts = <0 115 0x04>;
gpr = <&gpr>;
clocks = <&clks 123>, <&clks 124>;
clock-names = "iahb", "isfr";
status = "disabled";
+
+ port at 0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
};
dcic1: dcic at 020e4000 {
@@ -1588,8 +1652,27 @@
reg = <0x021dc000 0x4000>;
};
- mipi at 021e0000 { /* MIPI-DSI */
+ mipi_dsi: mipi at 021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x021e0000 0x4000>;
+ status = "disabled";
+
+ port at 0 {
+ reg = <0>;
+
+ mipi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_mipi>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ mipi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_mipi>;
+ };
+ };
};
vdoa at 021e4000 {
@@ -1643,13 +1726,64 @@
};
ipu1: ipu at 02400000 {
- #crtc-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,imx6q-ipu";
reg = <0x02400000 0x400000>;
interrupts = <0 6 0x4 0 5 0x4>;
clocks = <&clks 130>, <&clks 131>, <&clks 132>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
+
+ ipu1_di0: port at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ ipu1_di0_disp0: endpoint at 0 {
+ };
+
+ ipu1_di0_hdmi: endpoint at 1 {
+ remote-endpoint = <&hdmi_mux_0>;
+ };
+
+ ipu1_di0_mipi: endpoint at 2 {
+ remote-endpoint = <&mipi_mux_0>;
+ };
+
+ ipu1_di0_lvds0: endpoint at 3 {
+ remote-endpoint = <&lvds0_mux_0>;
+ };
+
+ ipu1_di0_lvds1: endpoint at 4 {
+ remote-endpoint = <&lvds1_mux_0>;
+ };
+ };
+
+ ipu1_di1: port at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ ipu1_di0_disp1: endpoint at 0 {
+ };
+
+ ipu1_di1_hdmi: endpoint at 1 {
+ remote-endpoint = <&hdmi_mux_1>;
+ };
+
+ ipu1_di1_mipi: endpoint at 2 {
+ remote-endpoint = <&mipi_mux_1>;
+ };
+
+ ipu1_di1_lvds0: endpoint at 3 {
+ remote-endpoint = <&lvds0_mux_1>;
+ };
+
+ ipu1_di1_lvds1: endpoint at 4 {
+ remote-endpoint = <&lvds1_mux_1>;
+ };
+ };
};
};
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 9/9] staging: imx-drm: Update TODO
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-18 11:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: David Airlie, Greg Kroah-Hartman, Shawn Guo, Fabio Estevam,
Grant Likely, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
devicetree-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel
The device tree bindings are updated regardless of the common display
framework and in the meantime the HDMI driver was included.
Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
drivers/staging/imx-drm/TODO | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/staging/imx-drm/TODO b/drivers/staging/imx-drm/TODO
index 6a9da94..29636fb 100644
--- a/drivers/staging/imx-drm/TODO
+++ b/drivers/staging/imx-drm/TODO
@@ -1,15 +1,10 @@
TODO:
- get DRM Maintainer review for this code
-- Wait for common display framework to hit mainline and update the IPU
- driver to use it. This will most probably make changes to the devicetree
- bindings necessary.
-- Factor out more code to common helper functions
- decide where to put the base driver. It is not specific to a subsystem
and would be used by DRM/KMS and media/V4L2
Missing features (not necessarily for moving out of staging):
-- Add i.MX6 HDMI support
- Add support for IC (Image converter)
- Add support for CSI (CMOS Sensor interface)
- Add support for VDIC (Video Deinterlacer)
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [RFC PATCH v3 9/9] staging: imx-drm: Update TODO
@ 2014-02-18 11:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-18 11:36 UTC (permalink / raw)
To: linux-arm-kernel
The device tree bindings are updated regardless of the common display
framework and in the meantime the HDMI driver was included.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/staging/imx-drm/TODO | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/staging/imx-drm/TODO b/drivers/staging/imx-drm/TODO
index 6a9da94..29636fb 100644
--- a/drivers/staging/imx-drm/TODO
+++ b/drivers/staging/imx-drm/TODO
@@ -1,15 +1,10 @@
TODO:
- get DRM Maintainer review for this code
-- Wait for common display framework to hit mainline and update the IPU
- driver to use it. This will most probably make changes to the devicetree
- bindings necessary.
-- Factor out more code to common helper functions
- decide where to put the base driver. It is not specific to a subsystem
and would be used by DRM/KMS and media/V4L2
Missing features (not necessarily for moving out of staging):
-- Add i.MX6 HDMI support
- Add support for IC (Image converter)
- Add support for CSI (CMOS Sensor interface)
- Add support for VDIC (Video Deinterlacer)
--
1.8.5.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 0/9] imx-drm dt bindings
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-24 15:36 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 15:36 UTC (permalink / raw)
To: Russell King - ARM Linux, Greg Kroah-Hartman
Cc: devel, devicetree, dri-devel, kernel, Grant Likely, linux-arm-kernel
Am Dienstag, den 18.02.2014, 12:36 +0100 schrieb Philipp Zabel:
> Hi,
>
> here is an updated and more complete version of the imx-drm DT binding
> series. These patches apply on top of Russell's second preview of the
> imx-drm cleanup series on v3.14-rc2. I have added device tree bindings
> between IPU and the encoders as documented in
> Documentation/devicetree/bindings/media/video-interfaces.txt
> and used those to determine the possible_crtcs and mux_id.
>
> The crtc cookie is replaced with a the port device tree node,
> which is unique and therefore allows to get rid of the di_id
> comparison. Storing the multiplexer input numbers in the device
> tree removes the need to know the ipu_id. This should also allow
> to replace IPU2 with LCDIF on i.MX6 Solo more easily.
>
> In v3 also connections between display interface ports and encoders are
> used to find all necessary components, so that only the display interfaces
> have to be configured in the imx-drm node. This allows to move the imx-drm
> node into the SoC level dtsi. I've also updated the existing i.MX51 and
> i.MX53 device trees this time and updated/added the devicetree binding
> documentation.
>
> Patch 2/9 adds a temporary copy of the v4l2_of parser functions. Those
> are going to be moved to some place where they can be used by drm drivers,
> eventually, so those local copies can be dropped again.
Russell has sent a pull request for the imx-drm component support series
now, and we're at v3.13-rc4 already. This patch series still applies on
top of
git://ftp.arm.linux.org.uk/~rmk/linux-arm.git imx-drm-staging
I'd appreciate some feedback on this. Or shall I resend without the RFC?
regards
Philipp
> regards
> Philipp
>
> Lucas Stach (1):
> staging: imx-drm-core: don't request probe deferral in
> imx_drm_encoder_parse_of
>
> Philipp Zabel (8):
> staging: imx-drm: Add temporary copies of v4l2-of parsing functions
> staging: imx-drm-core: Use OF graph to find components and connections
> between encoder and crtcs
> staging: imx-drm: Document updated imx-drm device tree bindings
> staging: imx-drm: Document imx-hdmi device tree bindings
> ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to
> dtsi
> ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to
> dtsi
> ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node
> to dtsi
> staging: imx-drm: Update TODO
>
> .../bindings/staging/imx-drm/fsl-imx-drm.txt | 48 ++++-
> .../devicetree/bindings/staging/imx-drm/hdmi.txt | 53 +++++
> .../devicetree/bindings/staging/imx-drm/ldb.txt | 20 +-
> arch/arm/boot/dts/imx51-apf51dev.dts | 11 +-
> arch/arm/boot/dts/imx51-babbage.dts | 28 ++-
> arch/arm/boot/dts/imx51.dtsi | 22 ++-
> arch/arm/boot/dts/imx53-m53evk.dts | 17 +-
> arch/arm/boot/dts/imx53-mba53.dts | 15 +-
> arch/arm/boot/dts/imx53-qsb.dts | 17 +-
> arch/arm/boot/dts/imx53.dtsi | 64 +++++-
> arch/arm/boot/dts/imx6dl.dtsi | 22 +--
> arch/arm/boot/dts/imx6q-sabresd.dts | 4 -
> arch/arm/boot/dts/imx6q.dtsi | 124 +++++++++++-
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 -
> arch/arm/boot/dts/imx6qdl.dtsi | 138 ++++++++++++-
> drivers/staging/imx-drm/Makefile | 2 +-
> drivers/staging/imx-drm/TODO | 5 -
> drivers/staging/imx-drm/imx-drm-core.c | 217 ++++++++++++++-------
> drivers/staging/imx-drm/imx-drm-of.c | 132 +++++++++++++
> drivers/staging/imx-drm/imx-drm.h | 11 +-
> drivers/staging/imx-drm/imx-hdmi.c | 2 +-
> drivers/staging/imx-drm/imx-ldb.c | 4 +-
> drivers/staging/imx-drm/ipuv3-crtc.c | 47 ++++-
> 23 files changed, 842 insertions(+), 167 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
> create mode 100644 drivers/staging/imx-drm/imx-drm-of.c
>
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 0/9] imx-drm dt bindings
@ 2014-02-24 15:36 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 15:36 UTC (permalink / raw)
To: linux-arm-kernel
Am Dienstag, den 18.02.2014, 12:36 +0100 schrieb Philipp Zabel:
> Hi,
>
> here is an updated and more complete version of the imx-drm DT binding
> series. These patches apply on top of Russell's second preview of the
> imx-drm cleanup series on v3.14-rc2. I have added device tree bindings
> between IPU and the encoders as documented in
> Documentation/devicetree/bindings/media/video-interfaces.txt
> and used those to determine the possible_crtcs and mux_id.
>
> The crtc cookie is replaced with a the port device tree node,
> which is unique and therefore allows to get rid of the di_id
> comparison. Storing the multiplexer input numbers in the device
> tree removes the need to know the ipu_id. This should also allow
> to replace IPU2 with LCDIF on i.MX6 Solo more easily.
>
> In v3 also connections between display interface ports and encoders are
> used to find all necessary components, so that only the display interfaces
> have to be configured in the imx-drm node. This allows to move the imx-drm
> node into the SoC level dtsi. I've also updated the existing i.MX51 and
> i.MX53 device trees this time and updated/added the devicetree binding
> documentation.
>
> Patch 2/9 adds a temporary copy of the v4l2_of parser functions. Those
> are going to be moved to some place where they can be used by drm drivers,
> eventually, so those local copies can be dropped again.
Russell has sent a pull request for the imx-drm component support series
now, and we're at v3.13-rc4 already. This patch series still applies on
top of
git://ftp.arm.linux.org.uk/~rmk/linux-arm.git imx-drm-staging
I'd appreciate some feedback on this. Or shall I resend without the RFC?
regards
Philipp
> regards
> Philipp
>
> Lucas Stach (1):
> staging: imx-drm-core: don't request probe deferral in
> imx_drm_encoder_parse_of
>
> Philipp Zabel (8):
> staging: imx-drm: Add temporary copies of v4l2-of parsing functions
> staging: imx-drm-core: Use OF graph to find components and connections
> between encoder and crtcs
> staging: imx-drm: Document updated imx-drm device tree bindings
> staging: imx-drm: Document imx-hdmi device tree bindings
> ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to
> dtsi
> ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to
> dtsi
> ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node
> to dtsi
> staging: imx-drm: Update TODO
>
> .../bindings/staging/imx-drm/fsl-imx-drm.txt | 48 ++++-
> .../devicetree/bindings/staging/imx-drm/hdmi.txt | 53 +++++
> .../devicetree/bindings/staging/imx-drm/ldb.txt | 20 +-
> arch/arm/boot/dts/imx51-apf51dev.dts | 11 +-
> arch/arm/boot/dts/imx51-babbage.dts | 28 ++-
> arch/arm/boot/dts/imx51.dtsi | 22 ++-
> arch/arm/boot/dts/imx53-m53evk.dts | 17 +-
> arch/arm/boot/dts/imx53-mba53.dts | 15 +-
> arch/arm/boot/dts/imx53-qsb.dts | 17 +-
> arch/arm/boot/dts/imx53.dtsi | 64 +++++-
> arch/arm/boot/dts/imx6dl.dtsi | 22 +--
> arch/arm/boot/dts/imx6q-sabresd.dts | 4 -
> arch/arm/boot/dts/imx6q.dtsi | 124 +++++++++++-
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 -
> arch/arm/boot/dts/imx6qdl.dtsi | 138 ++++++++++++-
> drivers/staging/imx-drm/Makefile | 2 +-
> drivers/staging/imx-drm/TODO | 5 -
> drivers/staging/imx-drm/imx-drm-core.c | 217 ++++++++++++++-------
> drivers/staging/imx-drm/imx-drm-of.c | 132 +++++++++++++
> drivers/staging/imx-drm/imx-drm.h | 11 +-
> drivers/staging/imx-drm/imx-hdmi.c | 2 +-
> drivers/staging/imx-drm/imx-ldb.c | 4 +-
> drivers/staging/imx-drm/ipuv3-crtc.c | 47 ++++-
> 23 files changed, 842 insertions(+), 167 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
> create mode 100644 drivers/staging/imx-drm/imx-drm-of.c
>
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-24 15:49 ` Russell King - ARM Linux
-1 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2014-02-24 15:49 UTC (permalink / raw)
To: Philipp Zabel
Cc: devel, devicetree, David Airlie, Greg Kroah-Hartman, dri-devel,
kernel, Grant Likely, Shawn Guo, linux-arm-kernel, Lucas Stach
On Tue, Feb 18, 2014 at 12:36:02PM +0100, Philipp Zabel wrote:
> From: Lucas Stach <l.stach@pengutronix.de>
>
> Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
> it is too late to request probe deferral. Rather the core should make sure
> that the crtcs are bound before the encoders, after all needed components
> are probed.
Why is it too late? -EPROBE_DEFER from this point will cause the driver
initialisation to correctly unwind and return -EPROBE_DEFER to the
last-to-be-added component.
> This fixes probe failure when using the LDB on i.MX6.
More details please.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
@ 2014-02-24 15:49 ` Russell King - ARM Linux
0 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2014-02-24 15:49 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 18, 2014 at 12:36:02PM +0100, Philipp Zabel wrote:
> From: Lucas Stach <l.stach@pengutronix.de>
>
> Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
> it is too late to request probe deferral. Rather the core should make sure
> that the crtcs are bound before the encoders, after all needed components
> are probed.
Why is it too late? -EPROBE_DEFER from this point will cause the driver
initialisation to correctly unwind and return -EPROBE_DEFER to the
last-to-be-added component.
> This fixes probe failure when using the LDB on i.MX6.
More details please.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions
2014-02-18 11:36 ` Philipp Zabel
@ 2014-02-24 15:52 ` Russell King - ARM Linux
-1 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2014-02-24 15:52 UTC (permalink / raw)
To: Philipp Zabel
Cc: devel, devicetree, Greg Kroah-Hartman, dri-devel, kernel,
Grant Likely, linux-arm-kernel
On Tue, Feb 18, 2014 at 12:36:03PM +0100, Philipp Zabel wrote:
> From: Philipp Zabel <philipp.zabel@gmail.com>
>
> The existing v4l2-of parser functions for the video interface bindings
> described in Documentation/device-tree/bindings/media/video-interfaces.txt
> are useful for DRM drivers, too. They will be moved to drivers/media
> so they can be used by drm drivers, too. Until then, duplicate the
> v4l2-of parser functions temporarily.
>
> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Ergh. So, because we can't get agreement on where to put the common
helpers, we have to put up with adding duplicate helpers into the
staging directory, inflating not only the kernel source code size
but also the binary size as well.
Come on people, get agreement on how to deal with this. Staging may
be a dumping ground for drivers which aren't ready to be merged as
proper drivers, but this is no reason to ignore proper process.
Do we, or do we not want to get imx-drm out of drivers/staging? If
we do, the only way that's going to happen is if we stop throwing in
this kind of stuff.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions
@ 2014-02-24 15:52 ` Russell King - ARM Linux
0 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2014-02-24 15:52 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 18, 2014 at 12:36:03PM +0100, Philipp Zabel wrote:
> From: Philipp Zabel <philipp.zabel@gmail.com>
>
> The existing v4l2-of parser functions for the video interface bindings
> described in Documentation/device-tree/bindings/media/video-interfaces.txt
> are useful for DRM drivers, too. They will be moved to drivers/media
> so they can be used by drm drivers, too. Until then, duplicate the
> v4l2-of parser functions temporarily.
>
> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Ergh. So, because we can't get agreement on where to put the common
helpers, we have to put up with adding duplicate helpers into the
staging directory, inflating not only the kernel source code size
but also the binary size as well.
Come on people, get agreement on how to deal with this. Staging may
be a dumping ground for drivers which aren't ready to be merged as
proper drivers, but this is no reason to ignore proper process.
Do we, or do we not want to get imx-drm out of drivers/staging? If
we do, the only way that's going to happen is if we stop throwing in
this kind of stuff.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
2014-02-24 15:49 ` Russell King - ARM Linux
@ 2014-02-24 16:56 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 16:56 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, David Airlie, Greg Kroah-Hartman, dri-devel,
kernel, Grant Likely, Shawn Guo, linux-arm-kernel, Lucas Stach
Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> On Tue, Feb 18, 2014 at 12:36:02PM +0100, Philipp Zabel wrote:
> > From: Lucas Stach <l.stach@pengutronix.de>
> >
> > Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
> > it is too late to request probe deferral. Rather the core should make sure
> > that the crtcs are bound before the encoders, after all needed components
> > are probed.
>
> Why is it too late? -EPROBE_DEFER from this point will cause the driver
> initialisation to correctly unwind and return -EPROBE_DEFER to the
> last-to-be-added component.
Hmm, you are right. I have conflated two separate issues here. I'll back
that out.
> > This fixes probe failure when using the LDB on i.MX6.
>
> More details please.
One issue was that the DT parsing code would try to add the imx-ldb
component right after the first crtc, and then its bind would fail
in imx_drm_encoder_parse_of because the three remaining crtcs were
not yet registered. This is already fixed by adding the crtc
components first.
The other issue is that once we add bridges that also have output
ports, imx_drm_encoder_parse_of needs to skip those.
thanks
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
@ 2014-02-24 16:56 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 16:56 UTC (permalink / raw)
To: linux-arm-kernel
Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> On Tue, Feb 18, 2014 at 12:36:02PM +0100, Philipp Zabel wrote:
> > From: Lucas Stach <l.stach@pengutronix.de>
> >
> > Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
> > it is too late to request probe deferral. Rather the core should make sure
> > that the crtcs are bound before the encoders, after all needed components
> > are probed.
>
> Why is it too late? -EPROBE_DEFER from this point will cause the driver
> initialisation to correctly unwind and return -EPROBE_DEFER to the
> last-to-be-added component.
Hmm, you are right. I have conflated two separate issues here. I'll back
that out.
> > This fixes probe failure when using the LDB on i.MX6.
>
> More details please.
One issue was that the DT parsing code would try to add the imx-ldb
component right after the first crtc, and then its bind would fail
in imx_drm_encoder_parse_of because the three remaining crtcs were
not yet registered. This is already fixed by adding the crtc
components first.
The other issue is that once we add bridges that also have output
ports, imx_drm_encoder_parse_of needs to skip those.
thanks
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
2014-02-24 16:56 ` Philipp Zabel
@ 2014-02-24 17:03 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 17:03 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, David Airlie, Greg Kroah-Hartman, dri-devel,
kernel, Grant Likely, Shawn Guo, linux-arm-kernel, Lucas Stach
Am Montag, den 24.02.2014, 17:56 +0100 schrieb Philipp Zabel:
> Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> > On Tue, Feb 18, 2014 at 12:36:02PM +0100, Philipp Zabel wrote:
> > > From: Lucas Stach <l.stach@pengutronix.de>
> > >
> > > Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
> > > it is too late to request probe deferral. Rather the core should make sure
> > > that the crtcs are bound before the encoders, after all needed components
> > > are probed.
> >
> > Why is it too late? -EPROBE_DEFER from this point will cause the driver
> > initialisation to correctly unwind and return -EPROBE_DEFER to the
> > last-to-be-added component.
>
> Hmm, you are right. I have conflated two separate issues here. I'll back
> that out.
>
> > > This fixes probe failure when using the LDB on i.MX6.
> >
> > More details please.
>
> One issue was that the DT parsing code would try to add the imx-ldb
> component right after the first crtc, and then its bind would fail
> in imx_drm_encoder_parse_of because the three remaining crtcs were
> not yet registered. This is already fixed by adding the crtc
> components first.
On second thought, now that the crtcs are all bound before the encoders,
we'll never even reach this point until all crtcs are available.
regards
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
@ 2014-02-24 17:03 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 17:03 UTC (permalink / raw)
To: linux-arm-kernel
Am Montag, den 24.02.2014, 17:56 +0100 schrieb Philipp Zabel:
> Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> > On Tue, Feb 18, 2014 at 12:36:02PM +0100, Philipp Zabel wrote:
> > > From: Lucas Stach <l.stach@pengutronix.de>
> > >
> > > Since imx_drm_encoder_parse_of is called from the encoder bind callbacks,
> > > it is too late to request probe deferral. Rather the core should make sure
> > > that the crtcs are bound before the encoders, after all needed components
> > > are probed.
> >
> > Why is it too late? -EPROBE_DEFER from this point will cause the driver
> > initialisation to correctly unwind and return -EPROBE_DEFER to the
> > last-to-be-added component.
>
> Hmm, you are right. I have conflated two separate issues here. I'll back
> that out.
>
> > > This fixes probe failure when using the LDB on i.MX6.
> >
> > More details please.
>
> One issue was that the DT parsing code would try to add the imx-ldb
> component right after the first crtc, and then its bind would fail
> in imx_drm_encoder_parse_of because the three remaining crtcs were
> not yet registered. This is already fixed by adding the crtc
> components first.
On second thought, now that the crtcs are all bound before the encoders,
we'll never even reach this point until all crtcs are available.
regards
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
2014-02-24 16:56 ` Philipp Zabel
@ 2014-02-24 17:06 ` Russell King - ARM Linux
-1 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2014-02-24 17:06 UTC (permalink / raw)
To: Philipp Zabel
Cc: devel, devicetree, Greg Kroah-Hartman, dri-devel, kernel,
Grant Likely, linux-arm-kernel
On Mon, Feb 24, 2014 at 05:56:38PM +0100, Philipp Zabel wrote:
> Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> One issue was that the DT parsing code would try to add the imx-ldb
> component right after the first crtc, and then its bind would fail
> in imx_drm_encoder_parse_of because the three remaining crtcs were
> not yet registered. This is already fixed by adding the crtc
> components first.
That's what happens anyway - we add /all/ the CRTCs first before we
start adding the connectors.
That means the CRTCs will be bound before the connectors (ldb).
What you're probably missing is that with what's in my branch, if you
want both CRTCs or the second CRTC in the IPU pair, you must specify
both in the "crtcs" property - iow "crtcs = <&ipuX 0>, <&ipuX 1>".
The reason is there's no way to differentiate the individual platform
devices there without delving into the platform data.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
@ 2014-02-24 17:06 ` Russell King - ARM Linux
0 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2014-02-24 17:06 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Feb 24, 2014 at 05:56:38PM +0100, Philipp Zabel wrote:
> Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> One issue was that the DT parsing code would try to add the imx-ldb
> component right after the first crtc, and then its bind would fail
> in imx_drm_encoder_parse_of because the three remaining crtcs were
> not yet registered. This is already fixed by adding the crtc
> components first.
That's what happens anyway - we add /all/ the CRTCs first before we
start adding the connectors.
That means the CRTCs will be bound before the connectors (ldb).
What you're probably missing is that with what's in my branch, if you
want both CRTCs or the second CRTC in the IPU pair, you must specify
both in the "crtcs" property - iow "crtcs = <&ipuX 0>, <&ipuX 1>".
The reason is there's no way to differentiate the individual platform
devices there without delving into the platform data.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions
2014-02-24 15:52 ` Russell King - ARM Linux
@ 2014-02-24 17:31 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 17:31 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Philipp Zabel, David Airlie,
Greg Kroah-Hartman, dri-devel, kernel, Grant Likely, Shawn Guo,
linux-arm-kernel
Am Montag, den 24.02.2014, 15:52 +0000 schrieb Russell King - ARM Linux:
> On Tue, Feb 18, 2014 at 12:36:03PM +0100, Philipp Zabel wrote:
> > From: Philipp Zabel <philipp.zabel@gmail.com>
> >
> > The existing v4l2-of parser functions for the video interface bindings
> > described in Documentation/device-tree/bindings/media/video-interfaces.txt
> > are useful for DRM drivers, too. They will be moved to drivers/media
> > so they can be used by drm drivers, too. Until then, duplicate the
> > v4l2-of parser functions temporarily.
> >
> > Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
>
> Ergh. So, because we can't get agreement on where to put the common
> helpers, we have to put up with adding duplicate helpers into the
> staging directory, inflating not only the kernel source code size
> but also the binary size as well.
This part is only for the convenience of prospective reviewers/testers.
I hope I don't have exhausted your patience at this patch, because the
real changes start at 3/9.
This is one reason why I still didn't drop the RFC. Basically, with so
many moving parts, I didn't feel like telling people to fetch three
different series just to make sense of this one.
> Come on people, get agreement on how to deal with this. Staging may
> be a dumping ground for drivers which aren't ready to be merged as
> proper drivers, but this is no reason to ignore proper process.
>
> Do we, or do we not want to get imx-drm out of drivers/staging? If
> we do, the only way that's going to happen is if we stop throwing in
> this kind of stuff.
regards
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions
@ 2014-02-24 17:31 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 17:31 UTC (permalink / raw)
To: linux-arm-kernel
Am Montag, den 24.02.2014, 15:52 +0000 schrieb Russell King - ARM Linux:
> On Tue, Feb 18, 2014 at 12:36:03PM +0100, Philipp Zabel wrote:
> > From: Philipp Zabel <philipp.zabel@gmail.com>
> >
> > The existing v4l2-of parser functions for the video interface bindings
> > described in Documentation/device-tree/bindings/media/video-interfaces.txt
> > are useful for DRM drivers, too. They will be moved to drivers/media
> > so they can be used by drm drivers, too. Until then, duplicate the
> > v4l2-of parser functions temporarily.
> >
> > Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
>
> Ergh. So, because we can't get agreement on where to put the common
> helpers, we have to put up with adding duplicate helpers into the
> staging directory, inflating not only the kernel source code size
> but also the binary size as well.
This part is only for the convenience of prospective reviewers/testers.
I hope I don't have exhausted your patience at this patch, because the
real changes start at 3/9.
This is one reason why I still didn't drop the RFC. Basically, with so
many moving parts, I didn't feel like telling people to fetch three
different series just to make sense of this one.
> Come on people, get agreement on how to deal with this. Staging may
> be a dumping ground for drivers which aren't ready to be merged as
> proper drivers, but this is no reason to ignore proper process.
>
> Do we, or do we not want to get imx-drm out of drivers/staging? If
> we do, the only way that's going to happen is if we stop throwing in
> this kind of stuff.
regards
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
2014-02-24 17:06 ` Russell King - ARM Linux
@ 2014-02-24 17:41 ` Philipp Zabel
-1 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 17:41 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: devel, devicetree, Greg Kroah-Hartman, dri-devel, kernel,
Grant Likely, linux-arm-kernel
Am Montag, den 24.02.2014, 17:06 +0000 schrieb Russell King - ARM Linux:
> On Mon, Feb 24, 2014 at 05:56:38PM +0100, Philipp Zabel wrote:
> > Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> > One issue was that the DT parsing code would try to add the imx-ldb
> > component right after the first crtc, and then its bind would fail
> > in imx_drm_encoder_parse_of because the three remaining crtcs were
> > not yet registered. This is already fixed by adding the crtc
> > components first.
>
> That's what happens anyway - we add /all/ the CRTCs first before we
> start adding the connectors.
Yes, I know. I accidentally removed that feature when I switched to
parsing the OF graph instead of the crtcs and encoder properties, but
I've fixed this again in v3 without moving this patch out of the way.
regards
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of
@ 2014-02-24 17:41 ` Philipp Zabel
0 siblings, 0 replies; 36+ messages in thread
From: Philipp Zabel @ 2014-02-24 17:41 UTC (permalink / raw)
To: linux-arm-kernel
Am Montag, den 24.02.2014, 17:06 +0000 schrieb Russell King - ARM Linux:
> On Mon, Feb 24, 2014 at 05:56:38PM +0100, Philipp Zabel wrote:
> > Am Montag, den 24.02.2014, 15:49 +0000 schrieb Russell King - ARM Linux:
> > One issue was that the DT parsing code would try to add the imx-ldb
> > component right after the first crtc, and then its bind would fail
> > in imx_drm_encoder_parse_of because the three remaining crtcs were
> > not yet registered. This is already fixed by adding the crtc
> > components first.
>
> That's what happens anyway - we add /all/ the CRTCs first before we
> start adding the connectors.
Yes, I know. I accidentally removed that feature when I switched to
parsing the OF graph instead of the crtcs and encoder properties, but
I've fixed this again in v3 without moving this patch out of the way.
regards
Philipp
^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2014-02-24 17:41 UTC | newest]
Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-18 11:36 [RFC PATCH v3 0/9] imx-drm dt bindings Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 1/9] staging: imx-drm-core: don't request probe deferral in imx_drm_encoder_parse_of Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-24 15:49 ` Russell King - ARM Linux
2014-02-24 15:49 ` Russell King - ARM Linux
2014-02-24 16:56 ` Philipp Zabel
2014-02-24 16:56 ` Philipp Zabel
2014-02-24 17:03 ` Philipp Zabel
2014-02-24 17:03 ` Philipp Zabel
2014-02-24 17:06 ` Russell King - ARM Linux
2014-02-24 17:06 ` Russell King - ARM Linux
2014-02-24 17:41 ` Philipp Zabel
2014-02-24 17:41 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 2/9] staging: imx-drm: Add temporary copies of v4l2-of parsing functions Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-24 15:52 ` Russell King - ARM Linux
2014-02-24 15:52 ` Russell King - ARM Linux
2014-02-24 17:31 ` Philipp Zabel
2014-02-24 17:31 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 3/9] staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 4/9] staging: imx-drm: Document updated imx-drm device tree bindings Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 5/9] staging: imx-drm: Document imx-hdmi " Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
[not found] ` <1392723370-4772-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-02-18 11:36 ` [RFC PATCH v3 6/9] ARM: dts: imx51: Add IPU ports and endpoints, move imx-drm node to dtsi Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 9/9] staging: imx-drm: Update TODO Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 7/9] ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-18 11:36 ` [RFC PATCH v3 8/9] ARM: dts: imx6qdl: " Philipp Zabel
2014-02-18 11:36 ` Philipp Zabel
2014-02-24 15:36 ` [RFC PATCH v3 0/9] imx-drm dt bindings Philipp Zabel
2014-02-24 15:36 ` Philipp Zabel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.