[PATCH v2] ARM: dts: vf610-twr: Add support for sdhc1

[shawn.guo@linaro.org (Shawn Guo)]

On Mon, Mar 03, 2014 at 05:29:33PM +0200, Stoica Cosmin Stefan wrote:
> From: Cosmin Stoica <cosminstefan.stoica@freescale.com>
> 
> The kernel was not able to boot from SD card because sdhc support
> was not present into the dts.
> 
> A new entry for sdhc1 was added for vf610-twr board based on the
> compatible entry present on imx53.
> 
> After applying these changes, the kernel is able to boot successfully
> from SD card.
> 
> Changes v1-v2:
> According to Shawn Guo's comments:
> - moved esdhc1 node before fec0 in board dts file;
> - reformatted clocks line;
> - removed duplicate property (bus-width) in dtsi file.
> 
> Signed-off-by: Cosmin Stoica <cosminstefan.stoica@freescale.com>
> Signed-off-by: Chircu Bogdan <Bogdan.Chircu@freescale.com>
> ---
>  arch/arm/boot/dts/vf610-twr.dts |    8 ++++++++
>  arch/arm/boot/dts/vf610.dtsi    |   11 +++++++++++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
> index 7dd1d6e..e77c98e 100644
> --- a/arch/arm/boot/dts/vf610-twr.dts
> +++ b/arch/arm/boot/dts/vf610-twr.dts
> @@ -111,6 +111,13 @@
>  	};
>  };
>  
> +&esdhc1 {
> +   pinctrl-names = "default";
> +   pinctrl-0 = <&pinctrl_esdhc1_1>;

Please base the patch on my for-next branch below, where stuff
like pinctrl_esdhc1_1 have gone into board dts.

  git://git.linaro.org/people/shawnguo/linux-2.6.git for-next

> +   bus-width = <4>;
> +   status = "okay";
> +};
> +
>  &fec0 {
>  	phy-mode = "rmii";
>  	pinctrl-names = "default";
> @@ -227,3 +234,4 @@
>  	pinctrl-0 = <&pinctrl_uart1>;
>  	status = "okay";
>  };
> +

You shouldn't add this new line.

Shawn

> diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
> index c63d26d..70de377 100644
> --- a/arch/arm/boot/dts/vf610.dtsi
> +++ b/arch/arm/boot/dts/vf610.dtsi
> @@ -344,6 +344,17 @@
>  				status = "disabled";
>  			};
>  
> +			esdhc1: esdhc at 400b2000 {
> +				   compatible = "fsl,imx53-esdhc";
> +				   reg = <0x400b2000 0x4000>;
> +				   interrupts = <0 28 0x04>;
> +				   clocks = <&clks VF610_CLK_IPG_BUS>,
> +                                           <&clks VF610_CLK_PLATFORM_BUS>,
> +                                           <&clks VF610_CLK_ESDHC1>;
> +				   clock-names = "ipg", "ahb", "per";
> +				   status = "disabled";
> +			};
> +
>  			fec0: ethernet at 400d0000 {
>  				compatible = "fsl,mvf600-fec";
>  				reg = <0x400d0000 0x1000>;
> -- 
> 1.7.9.5
> 
>