diff for duplicates of <20140324130129.1c2ec444@ipc1.ka-ro>
diff --git a/a/1.txt b/N1/1.txt
index 92954a6..f905bea 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -5,14 +5,14 @@ of the original mail (like I did with [...] in this reply).
Shawn Guo wrote:
-> On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Waßmann wrote:
+> On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Wa?mann wrote:
> > This patch adds support for the Ka-Ro electronics GmbH TX6 modules.
> > There are five distinct module types with either i.MX6Q or i.MX6DL and
> > LVDS or LCD display interface and one DTS file for a complete system
> > with an i.MX6DL based TX6 module and a baseboard mounted on the back
> > of a display (imx6dl-tx6dl-comtft.dts).
> >
-> > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
+> > Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
> > ---
> > arch/arm/boot/dts/Makefile | 6 +
> > arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++
@@ -39,7 +39,7 @@ Shawn Guo wrote:
> > +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
> > @@ -0,0 +1,114 @@
> > +/*
-> > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+> > + * Copyright 2014 Lothar Wa?mann <LW@KARO-electronics.de>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
@@ -88,7 +88,7 @@ Of course. :(
> > + default-brightness-level = <50>;
> > + };
> > +
-> > + display: display@di0 {
+> > + display: display at di0 {
> > + compatible = "fsl,imx-parallel-display";
> > + interface-pix-fmt = "rgb24";
> > + pinctrl-names = "default";
@@ -113,7 +113,7 @@ You can apply the patch, once it arrives in your tree.
> > +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> > @@ -0,0 +1,166 @@
> > +/*
-> > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+> > + * Copyright 2014 Lothar Wa?mann <LW@KARO-electronics.de>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
@@ -183,8 +183,8 @@ You can apply the patch, once it arrives in your tree.
> > +
> > + panel0 {
>
-> The convention of device tree node is node-name@unit-address, so in this
-> case it should probably be panel@0.
+> The convention of device tree node is node-name at unit-address, so in this
+> case it should probably be panel at 0.
>
AFAIK that's only true for nodes that require a 'reg' property.
Thus if it were:
@@ -193,7 +193,7 @@ Thus if it were:
#address-cells = <1>;
#size-cells = <0>;
- panel@0 {
+ panel at 0 {
compatible = "simple-panel";
reg = <0>;
power-supply = <®_3v3>;
@@ -207,7 +207,7 @@ Thus if it were:
> > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> > @@ -0,0 +1,672 @@
> > +/*
-> > + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+> > + * Copyright 2014 Lothar Wa?mann <LW@KARO-electronics.de>
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
@@ -246,7 +246,7 @@ Thus if it were:
> > + #size-cells = <0>;
> > + mclk: codec_clock {
>
-> clock@0
+> clock at 0
>
OK.
@@ -267,7 +267,7 @@ OK.
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +
-> > + sgtl5000: sgtl5000@0a {
+> > + sgtl5000: sgtl5000 at 0a {
> > + compatible = "fsl,sgtl5000";
> > + reg = <0x0a>;
> > + VDDA-supply = <®_2v5>;
@@ -275,7 +275,7 @@ OK.
> > + clocks = <&mclk>;
> > + };
> > +
-> > + polytouch: edt-ft5x06@38 {
+> > + polytouch: edt-ft5x06 at 38 {
> > + compatible = "edt,edt-ft5x06";
> > + reg = <0x38>;
> > + pinctrl-names = "default";
@@ -293,7 +293,7 @@ driver.
> > + linux,wakeup;
> > + };
> > +
-> > + touchscreen: tsc2007@48 {
+> > + touchscreen: tsc2007 at 48 {
> > + compatible = "ti,tsc2007";
> > + reg = <0x48>;
> > + pinctrl-names = "default";
@@ -359,14 +359,14 @@ that the uart can be used with or without RTS/CTS, without having to
mess around with the pinctrl defs.
-Lothar Waßmann
+Lothar Wa?mann
--
___________________________________________________________
-Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
+Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
-Geschäftsführer: Matthias Kaussen
+Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
-www.karo-electronics.de | info@karo-electronics.de
+www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________
\ No newline at end of file
diff --git a/a/content_digest b/N1/content_digest
index 829e2b3..152dbd0 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -5,28 +5,16 @@
"ref\00020140322082352.GF5938\@dragon\0"
]
[
- "From\0Lothar Wa\303\237mann <LW\@karo-electronics.de>\0"
+ "From\0LW\@karo-electronics.de (Lothar Wa\303\237mann)\0"
]
[
- "Subject\0Re: [PATCH] ARM: dts: imx6: add support for Ka-Ro TX6 modules\0"
+ "Subject\0[PATCH] ARM: dts: imx6: add support for Ka-Ro TX6 modules\0"
]
[
"Date\0Mon, 24 Mar 2014 13:01:29 +0100\0"
]
[
- "To\0Shawn Guo <shawn.guo\@freescale.com>\0"
-]
-[
- "Cc\0Mark Rutland <mark.rutland\@arm.com>",
- " devicetree\@vger.kernel.org",
- " Russell King <linux\@arm.linux.org.uk>",
- " Pawel Moll <pawel.moll\@arm.com>",
- " Ian Campbell <ijc+devicetree\@hellion.org.uk>",
- " linux-kernel\@vger.kernel.org",
- " Rob Herring <robh+dt\@kernel.org>",
- " Sascha Hauer <kernel\@pengutronix.de>",
- " Kumar Gala <galak\@codeaurora.org>",
- " linux-arm-kernel\@lists.infradead.org\0"
+ "To\0linux-arm-kernel\@lists.infradead.org\0"
]
[
"\0000:1\0"
@@ -42,14 +30,14 @@
"\n",
"\n",
"Shawn Guo wrote:\n",
- "> On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Wa\303\237mann wrote:\n",
+ "> On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Wa?mann wrote:\n",
"> > This patch adds support for the Ka-Ro electronics GmbH TX6 modules.\n",
"> > There are five distinct module types with either i.MX6Q or i.MX6DL and\n",
"> > LVDS or LCD display interface and one DTS file for a complete system\n",
"> > with an i.MX6DL based TX6 module and a baseboard mounted on the back\n",
"> > of a display (imx6dl-tx6dl-comtft.dts).\n",
"> > \n",
- "> > Signed-off-by: Lothar Wa\303\237mann <LW\@KARO-electronics.de>\n",
+ "> > Signed-off-by: Lothar Wa?mann <LW\@KARO-electronics.de>\n",
"> > ---\n",
"> > arch/arm/boot/dts/Makefile | 6 +\n",
"> > arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++\n",
@@ -76,7 +64,7 @@
"> > +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts\n",
"> > \@\@ -0,0 +1,114 \@\@\n",
"> > +/*\n",
- "> > + * Copyright 2014 Lothar Wa\303\237mann <LW\@KARO-electronics.de>\n",
+ "> > + * Copyright 2014 Lothar Wa?mann <LW\@KARO-electronics.de>\n",
"> > + *\n",
"> > + * The code contained herein is licensed under the GNU General Public\n",
"> > + * License. You may obtain a copy of the GNU General Public License\n",
@@ -125,7 +113,7 @@
"> > +\t\tdefault-brightness-level = <50>;\n",
"> > +\t};\n",
"> > +\n",
- "> > +\tdisplay: display\@di0 {\n",
+ "> > +\tdisplay: display at di0 {\n",
"> > +\t\tcompatible = \"fsl,imx-parallel-display\";\n",
"> > +\t\tinterface-pix-fmt = \"rgb24\";\n",
"> > +\t\tpinctrl-names = \"default\";\n",
@@ -150,7 +138,7 @@
"> > +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts\n",
"> > \@\@ -0,0 +1,166 \@\@\n",
"> > +/*\n",
- "> > + * Copyright 2014 Lothar Wa\303\237mann <LW\@KARO-electronics.de>\n",
+ "> > + * Copyright 2014 Lothar Wa?mann <LW\@KARO-electronics.de>\n",
"> > + *\n",
"> > + * The code contained herein is licensed under the GNU General Public\n",
"> > + * License. You may obtain a copy of the GNU General Public License\n",
@@ -220,8 +208,8 @@
"> > +\n",
"> > +\tpanel0 {\n",
"> \n",
- "> The convention of device tree node is node-name\@unit-address, so in this\n",
- "> case it should probably be panel\@0.\n",
+ "> The convention of device tree node is node-name at unit-address, so in this\n",
+ "> case it should probably be panel at 0.\n",
"> \n",
"AFAIK that's only true for nodes that require a 'reg' property.\n",
"Thus if it were:\n",
@@ -230,7 +218,7 @@
"\t\t#address-cells = <1>;\n",
"\t\t#size-cells = <0>;\n",
"\n",
- "\t\tpanel\@0 {\n",
+ "\t\tpanel at 0 {\n",
"\t\t\tcompatible = \"simple-panel\";\n",
"\t\t\treg = <0>;\n",
"\t\t\tpower-supply = <®_3v3>;\n",
@@ -244,7 +232,7 @@
"> > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi\n",
"> > \@\@ -0,0 +1,672 \@\@\n",
"> > +/*\n",
- "> > + * Copyright 2014 Lothar Wa\303\237mann <LW\@KARO-electronics.de>\n",
+ "> > + * Copyright 2014 Lothar Wa?mann <LW\@KARO-electronics.de>\n",
"> > + *\n",
"> > + * The code contained herein is licensed under the GNU General Public\n",
"> > + * License. You may obtain a copy of the GNU General Public License\n",
@@ -283,7 +271,7 @@
"> > +\t\t#size-cells = <0>;\n",
"> > +\t\tmclk: codec_clock {\n",
"> \n",
- "> clock\@0\n",
+ "> clock at 0\n",
"> \n",
"OK.\n",
"\n",
@@ -304,7 +292,7 @@
"> > +\tclock-frequency = <400000>;\n",
"> > +\tstatus = \"okay\";\n",
"> > +\n",
- "> > +\tsgtl5000: sgtl5000\@0a {\n",
+ "> > +\tsgtl5000: sgtl5000 at 0a {\n",
"> > +\t\tcompatible = \"fsl,sgtl5000\";\n",
"> > +\t\treg = <0x0a>;\n",
"> > +\t\tVDDA-supply = <®_2v5>;\n",
@@ -312,7 +300,7 @@
"> > +\t\tclocks = <&mclk>;\n",
"> > +\t};\n",
"> > +\n",
- "> > +\tpolytouch: edt-ft5x06\@38 {\n",
+ "> > +\tpolytouch: edt-ft5x06 at 38 {\n",
"> > +\t\tcompatible = \"edt,edt-ft5x06\";\n",
"> > +\t\treg = <0x38>;\n",
"> > +\t\tpinctrl-names = \"default\";\n",
@@ -330,7 +318,7 @@
"> > +\t\tlinux,wakeup;\n",
"> > +\t};\n",
"> > +\n",
- "> > +\ttouchscreen: tsc2007\@48 {\n",
+ "> > +\ttouchscreen: tsc2007 at 48 {\n",
"> > +\t\tcompatible = \"ti,tsc2007\";\n",
"> > +\t\treg = <0x48>;\n",
"> > +\t\tpinctrl-names = \"default\";\n",
@@ -396,17 +384,17 @@
"mess around with the pinctrl defs.\n",
"\n",
"\n",
- "Lothar Wa\303\237mann\n",
+ "Lothar Wa?mann\n",
"-- \n",
"___________________________________________________________\n",
"\n",
- "Ka-Ro electronics GmbH | Pascalstra\303\237e 22 | D - 52076 Aachen\n",
+ "Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen\n",
"Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10\n",
- "Gesch\303\244ftsf\303\274hrer: Matthias Kaussen\n",
+ "Gesch?ftsf?hrer: Matthias Kaussen\n",
"Handelsregistereintrag: Amtsgericht Aachen, HRB 4996\n",
"\n",
- "www.karo-electronics.de | info\@karo-electronics.de\n",
+ "www.karo-electronics.de | info at karo-electronics.de\n",
"___________________________________________________________"
]
-10e30443a74f15c5283b0b7900213a33743c260fd614215738de42cc54513856
+fad0e87b4a34ad1b9f139b7e7ebcdf5b4a24dc284d22a5745e74fddfb2c8df77
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.