[PATCH v2 0/8] ath10k: small cleanups to pci.c

[PATCH v2 0/8] ath10k: small cleanups to pci.c

[Kalle Valo]

While looking at the cold reset problem I did some cleanup
to pci.c.

v2: In patch 1 fix how to check FW_IND_INITIALIZED and also check for 0xffffffff.

---

Kalle Valo (8):
      ath10k: cleanup ath10k_pci_wait_for_target_init()
      ath10k: add module parameter to disable cold reset
      ath10k: fix name of target_ps module parameter
      ath10k: advertise only firmware API 2 files
      ath10k: delete ar_pci->fw_indicator_address
      ath10k: improve pci debug messages
      ath10k: add module parameter values to the pci info print
      ath10k: print chip id during boot


 drivers/net/wireless/ath/ath10k/core.c |    9 +-
 drivers/net/wireless/ath/ath10k/hw.h   |    1 
 drivers/net/wireless/ath/ath10k/pci.c  |  131 ++++++++++++++++++++++----------
 drivers/net/wireless/ath/ath10k/pci.h  |    3 -
 4 files changed, 98 insertions(+), 46 deletions(-)

[PATCH v2 0/8] ath10k: small cleanups to pci.c

[Kalle Valo]

While looking at the cold reset problem I did some cleanup
to pci.c.

v2: In patch 1 fix how to check FW_IND_INITIALIZED and also check for 0xffffffff.

---

Kalle Valo (8):
      ath10k: cleanup ath10k_pci_wait_for_target_init()
      ath10k: add module parameter to disable cold reset
      ath10k: fix name of target_ps module parameter
      ath10k: advertise only firmware API 2 files
      ath10k: delete ar_pci->fw_indicator_address
      ath10k: improve pci debug messages
      ath10k: add module parameter values to the pci info print
      ath10k: print chip id during boot


 drivers/net/wireless/ath/ath10k/core.c |    9 +-
 drivers/net/wireless/ath/ath10k/hw.h   |    1 
 drivers/net/wireless/ath/ath10k/pci.c  |  131 ++++++++++++++++++++++----------
 drivers/net/wireless/ath/ath10k/pci.h  |    3 -
 4 files changed, 98 insertions(+), 46 deletions(-)


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()

[Kalle Valo]

ath10k_pci_wait_for_target_init() did really follow the style used elsewhere in
ath10k. Use ath10k_pci_read/write() wrappers, simplify the while loop and
improve warning messages.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   40 ++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 9d242d801d9d..43d63677b133 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -48,6 +48,9 @@ MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
 module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
 
+/* how long wait to wait for target to initialise, in ms */
+#define ATH10K_PCI_TARGET_WAIT 3000
+
 #define QCA988X_2_0_DEVICE_ID	(0x003c)
 
 static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = {
@@ -2385,30 +2388,41 @@ static int ath10k_pci_deinit_irq(struct ath10k *ar)
 static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	int wait_limit = 300; /* 3 sec */
+	unsigned long timeout;
 	int ret;
+	u32 val;
 
 	ret = ath10k_pci_wake(ar);
 	if (ret) {
-		ath10k_err("failed to wake up target: %d\n", ret);
+		ath10k_err("failed to wake up target for init: %d\n", ret);
 		return ret;
 	}
 
-	while (wait_limit-- &&
-	       !(ioread32(ar_pci->mem + FW_INDICATOR_ADDRESS) &
-		 FW_IND_INITIALIZED)) {
+	timeout = jiffies + msecs_to_jiffies(ATH10K_PCI_TARGET_WAIT);
+
+	do {
+		val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
+
+		/* target should never return this */
+		if (val == 0xffffffff)
+			continue;
+
+		if (val & FW_IND_INITIALIZED)
+			break;
+
 		if (ar_pci->num_msi_intrs == 0)
 			/* Fix potential race by repeating CORE_BASE writes */
-			iowrite32(PCIE_INTR_FIRMWARE_MASK |
-				  PCIE_INTR_CE_MASK_ALL,
-				  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
-						 PCIE_INTR_ENABLE_ADDRESS));
+			ath10k_pci_soc_write32(ar, PCIE_INTR_ENABLE_ADDRESS,
+					       PCIE_INTR_FIRMWARE_MASK |
+					       PCIE_INTR_CE_MASK_ALL);
+
 		mdelay(10);
-	}
+	} while (time_before(jiffies, timeout));
 
-	if (wait_limit < 0) {
-		ath10k_err("target stalled\n");
-		ret = -EIO;
+	if (val == 0xffffffff || !(val & FW_IND_INITIALIZED)) {
+		ath10k_err("failed to receive initialized event from target: %08x\n",
+			   val);
+		ret = -ETIMEDOUT;
 		goto out;
 	}
 

[PATCH v2 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()

[Kalle Valo]

ath10k_pci_wait_for_target_init() did really follow the style used elsewhere in
ath10k. Use ath10k_pci_read/write() wrappers, simplify the while loop and
improve warning messages.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   40 ++++++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 9d242d801d9d..43d63677b133 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -48,6 +48,9 @@ MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
 module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
 
+/* how long wait to wait for target to initialise, in ms */
+#define ATH10K_PCI_TARGET_WAIT 3000
+
 #define QCA988X_2_0_DEVICE_ID	(0x003c)
 
 static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = {
@@ -2385,30 +2388,41 @@ static int ath10k_pci_deinit_irq(struct ath10k *ar)
 static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	int wait_limit = 300; /* 3 sec */
+	unsigned long timeout;
 	int ret;
+	u32 val;
 
 	ret = ath10k_pci_wake(ar);
 	if (ret) {
-		ath10k_err("failed to wake up target: %d\n", ret);
+		ath10k_err("failed to wake up target for init: %d\n", ret);
 		return ret;
 	}
 
-	while (wait_limit-- &&
-	       !(ioread32(ar_pci->mem + FW_INDICATOR_ADDRESS) &
-		 FW_IND_INITIALIZED)) {
+	timeout = jiffies + msecs_to_jiffies(ATH10K_PCI_TARGET_WAIT);
+
+	do {
+		val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
+
+		/* target should never return this */
+		if (val == 0xffffffff)
+			continue;
+
+		if (val & FW_IND_INITIALIZED)
+			break;
+
 		if (ar_pci->num_msi_intrs == 0)
 			/* Fix potential race by repeating CORE_BASE writes */
-			iowrite32(PCIE_INTR_FIRMWARE_MASK |
-				  PCIE_INTR_CE_MASK_ALL,
-				  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
-						 PCIE_INTR_ENABLE_ADDRESS));
+			ath10k_pci_soc_write32(ar, PCIE_INTR_ENABLE_ADDRESS,
+					       PCIE_INTR_FIRMWARE_MASK |
+					       PCIE_INTR_CE_MASK_ALL);
+
 		mdelay(10);
-	}
+	} while (time_before(jiffies, timeout));
 
-	if (wait_limit < 0) {
-		ath10k_err("target stalled\n");
-		ret = -EIO;
+	if (val == 0xffffffff || !(val & FW_IND_INITIALIZED)) {
+		ath10k_err("failed to receive initialized event from target: %08x\n",
+			   val);
+		ret = -ETIMEDOUT;
 		goto out;
 	}
 


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 2/8] ath10k: add module parameter to disable cold reset

[Kalle Valo]

As cold reset is not reliable with CUS223 boards, make it possible
to disable cold reset entirely and only use warm reset. This makes it also
easier to debug warm reset problems.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 43d63677b133..9dab859ed77b 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -39,8 +39,14 @@ enum ath10k_pci_irq_mode {
 	ATH10K_PCI_IRQ_MSI = 2,
 };
 
+enum ath10k_pci_reset_mode {
+	ATH10K_PCI_RESET_AUTO = 0,
+	ATH10K_PCI_RESET_WARM_ONLY = 1,
+};
+
 static unsigned int ath10k_target_ps;
 static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
+static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
 
 module_param(ath10k_target_ps, uint, 0644);
 MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
@@ -48,6 +54,9 @@ MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
 module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
 
+module_param_named(reset_mode, ath10k_pci_reset_mode, uint, 0644);
+MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
+
 /* how long wait to wait for target to initialise, in ms */
 #define ATH10K_PCI_TARGET_WAIT 3000
 
@@ -1969,9 +1978,14 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
 	 */
 	ret = __ath10k_pci_hif_power_up(ar, false);
 	if (ret) {
-		ath10k_warn("failed to power up target using warm reset (%d), trying cold reset\n",
+		ath10k_warn("failed to power up target using warm reset: %d\n",
 			    ret);
 
+		if (ath10k_pci_reset_mode == ATH10K_PCI_RESET_WARM_ONLY)
+			return ret;
+
+		ath10k_warn("trying cold reset\n");
+
 		ret = __ath10k_pci_hif_power_up(ar, true);
 		if (ret) {
 			ath10k_err("failed to power up target using cold reset too (%d)\n",

[PATCH v2 2/8] ath10k: add module parameter to disable cold reset

[Kalle Valo]

As cold reset is not reliable with CUS223 boards, make it possible
to disable cold reset entirely and only use warm reset. This makes it also
easier to debug warm reset problems.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 43d63677b133..9dab859ed77b 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -39,8 +39,14 @@ enum ath10k_pci_irq_mode {
 	ATH10K_PCI_IRQ_MSI = 2,
 };
 
+enum ath10k_pci_reset_mode {
+	ATH10K_PCI_RESET_AUTO = 0,
+	ATH10K_PCI_RESET_WARM_ONLY = 1,
+};
+
 static unsigned int ath10k_target_ps;
 static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
+static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
 
 module_param(ath10k_target_ps, uint, 0644);
 MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
@@ -48,6 +54,9 @@ MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
 module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
 
+module_param_named(reset_mode, ath10k_pci_reset_mode, uint, 0644);
+MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
+
 /* how long wait to wait for target to initialise, in ms */
 #define ATH10K_PCI_TARGET_WAIT 3000
 
@@ -1969,9 +1978,14 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
 	 */
 	ret = __ath10k_pci_hif_power_up(ar, false);
 	if (ret) {
-		ath10k_warn("failed to power up target using warm reset (%d), trying cold reset\n",
+		ath10k_warn("failed to power up target using warm reset: %d\n",
 			    ret);
 
+		if (ath10k_pci_reset_mode == ATH10K_PCI_RESET_WARM_ONLY)
+			return ret;
+
+		ath10k_warn("trying cold reset\n");
+
 		ret = __ath10k_pci_hif_power_up(ar, true);
 		if (ret) {
 			ath10k_err("failed to power up target using cold reset too (%d)\n",


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 3/8] ath10k: fix name of target_ps module parameter

[Kalle Valo]

The parameter name was ath10k_target_ps, but actually it should be just
target_ps. Module parameter names should not use the ath10k_ prefix.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 9dab859ed77b..670e6734a46b 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -44,12 +44,12 @@ enum ath10k_pci_reset_mode {
 	ATH10K_PCI_RESET_WARM_ONLY = 1,
 };
 
-static unsigned int ath10k_target_ps;
+static unsigned int ath10k_pci_target_ps;
 static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
 static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
 
-module_param(ath10k_target_ps, uint, 0644);
-MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
+module_param_named(target_ps, ath10k_pci_target_ps, uint, 0644);
+MODULE_PARM_DESC(target_ps, "Enable ath10k Target (SoC) PS option");
 
 module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
@@ -2531,7 +2531,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_ar_pci;
 	}
 
-	if (ath10k_target_ps)
+	if (ath10k_pci_target_ps)
 		set_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features);
 
 	ath10k_pci_dump_features(ar_pci);

[PATCH v2 3/8] ath10k: fix name of target_ps module parameter

[Kalle Valo]

The parameter name was ath10k_target_ps, but actually it should be just
target_ps. Module parameter names should not use the ath10k_ prefix.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 9dab859ed77b..670e6734a46b 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -44,12 +44,12 @@ enum ath10k_pci_reset_mode {
 	ATH10K_PCI_RESET_WARM_ONLY = 1,
 };
 
-static unsigned int ath10k_target_ps;
+static unsigned int ath10k_pci_target_ps;
 static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
 static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
 
-module_param(ath10k_target_ps, uint, 0644);
-MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
+module_param_named(target_ps, ath10k_pci_target_ps, uint, 0644);
+MODULE_PARM_DESC(target_ps, "Enable ath10k Target (SoC) PS option");
 
 module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
@@ -2531,7 +2531,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_ar_pci;
 	}
 
-	if (ath10k_target_ps)
+	if (ath10k_pci_target_ps)
 		set_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features);
 
 	ath10k_pci_dump_features(ar_pci);


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 4/8] ath10k: advertise only firmware API 2 files

[Kalle Valo]

We do not really support older firmware API 1 anymore, so better remove
MODULE_FIRMWARE() declarations for them and only list for API 2 files.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/hw.h  |    1 +
 drivers/net/wireless/ath/ath10k/pci.c |    3 +--
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 35fc44e281f5..007e855f4ba9 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -28,6 +28,7 @@
 #define QCA988X_HW_2_0_CHIP_ID_REV	0x2
 #define QCA988X_HW_2_0_FW_DIR		"ath10k/QCA988X/hw2.0"
 #define QCA988X_HW_2_0_FW_FILE		"firmware.bin"
+#define QCA988X_HW_2_0_FW_2_FILE	"firmware-2.bin"
 #define QCA988X_HW_2_0_OTP_FILE		"otp.bin"
 #define QCA988X_HW_2_0_BOARD_DATA_FILE	"board.bin"
 #define QCA988X_HW_2_0_PATCH_LOAD_ADDR	0x1234
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 670e6734a46b..085c7ee741b1 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2708,6 +2708,5 @@ module_exit(ath10k_pci_exit);
 MODULE_AUTHOR("Qualcomm Atheros");
 MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE);
-MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_2_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);

[PATCH v2 4/8] ath10k: advertise only firmware API 2 files

[Kalle Valo]

We do not really support older firmware API 1 anymore, so better remove
MODULE_FIRMWARE() declarations for them and only list for API 2 files.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/hw.h  |    1 +
 drivers/net/wireless/ath/ath10k/pci.c |    3 +--
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 35fc44e281f5..007e855f4ba9 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -28,6 +28,7 @@
 #define QCA988X_HW_2_0_CHIP_ID_REV	0x2
 #define QCA988X_HW_2_0_FW_DIR		"ath10k/QCA988X/hw2.0"
 #define QCA988X_HW_2_0_FW_FILE		"firmware.bin"
+#define QCA988X_HW_2_0_FW_2_FILE	"firmware-2.bin"
 #define QCA988X_HW_2_0_OTP_FILE		"otp.bin"
 #define QCA988X_HW_2_0_BOARD_DATA_FILE	"board.bin"
 #define QCA988X_HW_2_0_PATCH_LOAD_ADDR	0x1234
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 670e6734a46b..085c7ee741b1 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2708,6 +2708,5 @@ module_exit(ath10k_pci_exit);
 MODULE_AUTHOR("Qualcomm Atheros");
 MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE);
-MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_2_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 5/8] ath10k: delete ar_pci->fw_indicator_address

[Kalle Valo]

It always contains the same constant, no need to have a separate variable for it.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   16 ++++++----------
 drivers/net/wireless/ath/ath10k/pci.h |    3 ---
 2 files changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 085c7ee741b1..14d955b45c00 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1753,16 +1753,15 @@ static int ath10k_pci_ce_init(struct ath10k *ar)
 static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	u32 fw_indicator_address, fw_indicator;
+	u32 fw_indicator;
 
 	ath10k_pci_wake(ar);
 
-	fw_indicator_address = ar_pci->fw_indicator_address;
-	fw_indicator = ath10k_pci_read32(ar, fw_indicator_address);
+	fw_indicator = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
 
 	if (fw_indicator & FW_IND_EVENT_PENDING) {
 		/* ACK: clear Target-side pending event */
-		ath10k_pci_write32(ar, fw_indicator_address,
+		ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS,
 				   fw_indicator & ~FW_IND_EVENT_PENDING);
 
 		if (ar_pci->started) {
@@ -1781,7 +1780,6 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
 
 static int ath10k_pci_warm_reset(struct ath10k *ar)
 {
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret = 0;
 	u32 val;
 
@@ -1813,7 +1811,7 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 	msleep(100);
 
 	/* clear fw indicator */
-	ath10k_pci_write32(ar, ar_pci->fw_indicator_address, 0);
+	ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, 0);
 
 	/* clear target LF timer interrupts */
 	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
@@ -2154,7 +2152,6 @@ static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
 static void ath10k_pci_early_irq_tasklet(unsigned long data)
 {
 	struct ath10k *ar = (struct ath10k *)data;
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	u32 fw_ind;
 	int ret;
 
@@ -2165,9 +2162,9 @@ static void ath10k_pci_early_irq_tasklet(unsigned long data)
 		return;
 	}
 
-	fw_ind = ath10k_pci_read32(ar, ar_pci->fw_indicator_address);
+	fw_ind = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
 	if (fw_ind & FW_IND_EVENT_PENDING) {
-		ath10k_pci_write32(ar, ar_pci->fw_indicator_address,
+		ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS,
 				   fw_ind & ~FW_IND_EVENT_PENDING);
 
 		/* Some structures are unavailable during early boot or at
@@ -2544,7 +2541,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	}
 
 	ar_pci->ar = ar;
-	ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS;
 	atomic_set(&ar_pci->keep_awake_count, 0);
 
 	pci_set_drvdata(pdev, ar);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index b43fdb4f7319..dfdebb4157aa 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -189,9 +189,6 @@ struct ath10k_pci {
 
 	struct ath10k_hif_cb msg_callbacks_current;
 
-	/* Target address used to signal a pending firmware event */
-	u32 fw_indicator_address;
-
 	/* Copy Engine used for Diagnostic Accesses */
 	struct ath10k_ce_pipe *ce_diag;
 

[PATCH v2 5/8] ath10k: delete ar_pci->fw_indicator_address

[Kalle Valo]

It always contains the same constant, no need to have a separate variable for it.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   16 ++++++----------
 drivers/net/wireless/ath/ath10k/pci.h |    3 ---
 2 files changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 085c7ee741b1..14d955b45c00 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1753,16 +1753,15 @@ static int ath10k_pci_ce_init(struct ath10k *ar)
 static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	u32 fw_indicator_address, fw_indicator;
+	u32 fw_indicator;
 
 	ath10k_pci_wake(ar);
 
-	fw_indicator_address = ar_pci->fw_indicator_address;
-	fw_indicator = ath10k_pci_read32(ar, fw_indicator_address);
+	fw_indicator = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
 
 	if (fw_indicator & FW_IND_EVENT_PENDING) {
 		/* ACK: clear Target-side pending event */
-		ath10k_pci_write32(ar, fw_indicator_address,
+		ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS,
 				   fw_indicator & ~FW_IND_EVENT_PENDING);
 
 		if (ar_pci->started) {
@@ -1781,7 +1780,6 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
 
 static int ath10k_pci_warm_reset(struct ath10k *ar)
 {
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret = 0;
 	u32 val;
 
@@ -1813,7 +1811,7 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 	msleep(100);
 
 	/* clear fw indicator */
-	ath10k_pci_write32(ar, ar_pci->fw_indicator_address, 0);
+	ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, 0);
 
 	/* clear target LF timer interrupts */
 	val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
@@ -2154,7 +2152,6 @@ static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
 static void ath10k_pci_early_irq_tasklet(unsigned long data)
 {
 	struct ath10k *ar = (struct ath10k *)data;
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	u32 fw_ind;
 	int ret;
 
@@ -2165,9 +2162,9 @@ static void ath10k_pci_early_irq_tasklet(unsigned long data)
 		return;
 	}
 
-	fw_ind = ath10k_pci_read32(ar, ar_pci->fw_indicator_address);
+	fw_ind = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
 	if (fw_ind & FW_IND_EVENT_PENDING) {
-		ath10k_pci_write32(ar, ar_pci->fw_indicator_address,
+		ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS,
 				   fw_ind & ~FW_IND_EVENT_PENDING);
 
 		/* Some structures are unavailable during early boot or at
@@ -2544,7 +2541,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	}
 
 	ar_pci->ar = ar;
-	ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS;
 	atomic_set(&ar_pci->keep_awake_count, 0);
 
 	pci_set_drvdata(pdev, ar);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index b43fdb4f7319..dfdebb4157aa 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -189,9 +189,6 @@ struct ath10k_pci {
 
 	struct ath10k_hif_cb msg_callbacks_current;
 
-	/* Target address used to signal a pending firmware event */
-	u32 fw_indicator_address;
-
 	/* Copy Engine used for Diagnostic Accesses */
 	struct ath10k_ce_pipe *ce_diag;
 


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 6/8] ath10k: improve pci debug messages

[Kalle Valo]

To make it easier to debug pci problems improve the log messages in pci.c. Also
change some debug messages to warning messages to more easily catch problems.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   44 ++++++++++++++++++++++++++-------
 1 file changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 14d955b45c00..a4e2da3251dc 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -454,8 +454,8 @@ done:
 				__le32_to_cpu(((__le32 *)data_buf)[i]);
 		}
 	} else
-		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n",
-			   __func__, address);
+		ath10k_warn("failed to read diag value at 0x%x: %d\n",
+			    address, ret);
 
 	if (data_buf)
 		pci_free_consistent(ar_pci->pdev, orig_nbytes,
@@ -605,8 +605,8 @@ done:
 	}
 
 	if (ret != 0)
-		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", __func__,
-			   address);
+		ath10k_warn("failed to write diag value at 0x%x: %d\n",
+			    address, ret);
 
 	return ret;
 }
@@ -815,6 +815,9 @@ unlock:
 static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif get free queue number\n");
+
 	return ath10k_ce_num_free_src_entries(ar_pci->pipe_info[pipe].ce_hdl);
 }
 
@@ -866,6 +869,8 @@ static void ath10k_pci_hif_dump_area(struct ath10k *ar)
 static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
 					       int force)
 {
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif send complete check\n");
+
 	if (!force) {
 		int resources;
 		/*
@@ -892,7 +897,7 @@ static void ath10k_pci_hif_set_callbacks(struct ath10k *ar,
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif set callbacks\n");
 
 	memcpy(&ar_pci->msg_callbacks_current, callbacks,
 	       sizeof(ar_pci->msg_callbacks_current));
@@ -950,6 +955,8 @@ static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar,
 {
 	int ret = 0;
 
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif map service\n");
+
 	/* polling for received messages not supported */
 	*dl_is_polled = 0;
 
@@ -1009,6 +1016,8 @@ static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
 {
 	int ul_is_polled, dl_is_polled;
 
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif get default pipe\n");
+
 	(void)ath10k_pci_hif_map_service_to_pipe(ar,
 						 ATH10K_HTC_SVC_ID_RSVD_CTRL,
 						 ul_pipe,
@@ -1110,6 +1119,8 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret, ret_early;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif start\n");
+
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 
@@ -1264,7 +1275,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif stop\n");
 
 	ret = ath10k_ce_disable_interrupts(ar);
 	if (ret)
@@ -1783,7 +1794,7 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 	int ret = 0;
 	u32 val;
 
-	ath10k_dbg(ATH10K_DBG_BOOT, "boot performing warm chip reset\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot warm reset\n");
 
 	ret = ath10k_do_pci_wake(ar);
 	if (ret) {
@@ -1966,6 +1977,8 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
 {
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif power up\n");
+
 	/*
 	 * Hardware CUS232 version 2 has some issues with cold reset and the
 	 * preferred (and safer) way to perform a device reset is through a
@@ -1999,6 +2012,8 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif power down\n");
+
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_deinit_irq(ar);
@@ -2403,6 +2418,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 	int ret;
 	u32 val;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot waiting target to initialise\n");
+
 	ret = ath10k_pci_wake(ar);
 	if (ret) {
 		ath10k_err("failed to wake up target for init: %d\n", ret);
@@ -2414,6 +2431,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 	do {
 		val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
 
+		ath10k_dbg(ATH10K_DBG_BOOT, "boot target indicator %x\n", val);
+
 		/* target should never return this */
 		if (val == 0xffffffff)
 			continue;
@@ -2437,6 +2456,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 		goto out;
 	}
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot target initialised\n");
+
 out:
 	ath10k_pci_sleep(ar);
 	return ret;
@@ -2447,6 +2468,8 @@ static int ath10k_pci_cold_reset(struct ath10k *ar)
 	int i, ret;
 	u32 val;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot cold reset\n");
+
 	ret = ath10k_do_pci_wake(ar);
 	if (ret) {
 		ath10k_err("failed to wake up target: %d\n",
@@ -2478,6 +2501,9 @@ static int ath10k_pci_cold_reset(struct ath10k *ar)
 	}
 
 	ath10k_do_pci_sleep(ar);
+
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot cold reset complete\n");
+
 	return 0;
 }
 
@@ -2509,7 +2535,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	struct ath10k_pci *ar_pci;
 	u32 lcr_val, chip_id;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci probe\n");
 
 	ar_pci = kzalloc(sizeof(*ar_pci), GFP_KERNEL);
 	if (ar_pci == NULL)
@@ -2650,7 +2676,7 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
 	struct ath10k *ar = pci_get_drvdata(pdev);
 	struct ath10k_pci *ar_pci;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci remove\n");
 
 	if (!ar)
 		return;

[PATCH v2 6/8] ath10k: improve pci debug messages

[Kalle Valo]

To make it easier to debug pci problems improve the log messages in pci.c. Also
change some debug messages to warning messages to more easily catch problems.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |   44 ++++++++++++++++++++++++++-------
 1 file changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 14d955b45c00..a4e2da3251dc 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -454,8 +454,8 @@ done:
 				__le32_to_cpu(((__le32 *)data_buf)[i]);
 		}
 	} else
-		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n",
-			   __func__, address);
+		ath10k_warn("failed to read diag value at 0x%x: %d\n",
+			    address, ret);
 
 	if (data_buf)
 		pci_free_consistent(ar_pci->pdev, orig_nbytes,
@@ -605,8 +605,8 @@ done:
 	}
 
 	if (ret != 0)
-		ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", __func__,
-			   address);
+		ath10k_warn("failed to write diag value at 0x%x: %d\n",
+			    address, ret);
 
 	return ret;
 }
@@ -815,6 +815,9 @@ unlock:
 static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif get free queue number\n");
+
 	return ath10k_ce_num_free_src_entries(ar_pci->pipe_info[pipe].ce_hdl);
 }
 
@@ -866,6 +869,8 @@ static void ath10k_pci_hif_dump_area(struct ath10k *ar)
 static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
 					       int force)
 {
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif send complete check\n");
+
 	if (!force) {
 		int resources;
 		/*
@@ -892,7 +897,7 @@ static void ath10k_pci_hif_set_callbacks(struct ath10k *ar,
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif set callbacks\n");
 
 	memcpy(&ar_pci->msg_callbacks_current, callbacks,
 	       sizeof(ar_pci->msg_callbacks_current));
@@ -950,6 +955,8 @@ static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar,
 {
 	int ret = 0;
 
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif map service\n");
+
 	/* polling for received messages not supported */
 	*dl_is_polled = 0;
 
@@ -1009,6 +1016,8 @@ static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
 {
 	int ul_is_polled, dl_is_polled;
 
+	ath10k_dbg(ATH10K_DBG_PCI, "pci hif get default pipe\n");
+
 	(void)ath10k_pci_hif_map_service_to_pipe(ar,
 						 ATH10K_HTC_SVC_ID_RSVD_CTRL,
 						 ul_pipe,
@@ -1110,6 +1119,8 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret, ret_early;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif start\n");
+
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 
@@ -1264,7 +1275,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif stop\n");
 
 	ret = ath10k_ce_disable_interrupts(ar);
 	if (ret)
@@ -1783,7 +1794,7 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 	int ret = 0;
 	u32 val;
 
-	ath10k_dbg(ATH10K_DBG_BOOT, "boot performing warm chip reset\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot warm reset\n");
 
 	ret = ath10k_do_pci_wake(ar);
 	if (ret) {
@@ -1966,6 +1977,8 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
 {
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif power up\n");
+
 	/*
 	 * Hardware CUS232 version 2 has some issues with cold reset and the
 	 * preferred (and safer) way to perform a device reset is through a
@@ -1999,6 +2012,8 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot hif power down\n");
+
 	ath10k_pci_free_early_irq(ar);
 	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_deinit_irq(ar);
@@ -2403,6 +2418,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 	int ret;
 	u32 val;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot waiting target to initialise\n");
+
 	ret = ath10k_pci_wake(ar);
 	if (ret) {
 		ath10k_err("failed to wake up target for init: %d\n", ret);
@@ -2414,6 +2431,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 	do {
 		val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
 
+		ath10k_dbg(ATH10K_DBG_BOOT, "boot target indicator %x\n", val);
+
 		/* target should never return this */
 		if (val == 0xffffffff)
 			continue;
@@ -2437,6 +2456,8 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 		goto out;
 	}
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot target initialised\n");
+
 out:
 	ath10k_pci_sleep(ar);
 	return ret;
@@ -2447,6 +2468,8 @@ static int ath10k_pci_cold_reset(struct ath10k *ar)
 	int i, ret;
 	u32 val;
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot cold reset\n");
+
 	ret = ath10k_do_pci_wake(ar);
 	if (ret) {
 		ath10k_err("failed to wake up target: %d\n",
@@ -2478,6 +2501,9 @@ static int ath10k_pci_cold_reset(struct ath10k *ar)
 	}
 
 	ath10k_do_pci_sleep(ar);
+
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot cold reset complete\n");
+
 	return 0;
 }
 
@@ -2509,7 +2535,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	struct ath10k_pci *ar_pci;
 	u32 lcr_val, chip_id;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci probe\n");
 
 	ar_pci = kzalloc(sizeof(*ar_pci), GFP_KERNEL);
 	if (ar_pci == NULL)
@@ -2650,7 +2676,7 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
 	struct ath10k *ar = pci_get_drvdata(pdev);
 	struct ath10k_pci *ar_pci;
 
-	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_PCI, "pci remove\n");
 
 	if (!ar)
 		return;


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 7/8] ath10k: add module parameter values to the pci info print

[Kalle Valo]

Hopefully this makes it easier to debug problems in the future.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index a4e2da3251dc..dd34ac9a682f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1955,7 +1955,9 @@ static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset)
 		irq_mode = "legacy";
 
 	if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
-		ath10k_info("pci irq %s\n", irq_mode);
+		ath10k_info("pci irq %s irq_mode %d reset_mode %d\n",
+			    irq_mode, ath10k_pci_irq_mode,
+			    ath10k_pci_reset_mode);
 
 	return 0;
 

[PATCH v2 7/8] ath10k: add module parameter values to the pci info print

[Kalle Valo]

Hopefully this makes it easier to debug problems in the future.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index a4e2da3251dc..dd34ac9a682f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1955,7 +1955,9 @@ static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset)
 		irq_mode = "legacy";
 
 	if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
-		ath10k_info("pci irq %s\n", irq_mode);
+		ath10k_info("pci irq %s irq_mode %d reset_mode %d\n",
+			    irq_mode, ath10k_pci_irq_mode,
+			    ath10k_pci_reset_mode);
 
 	return 0;
 


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v2 8/8] ath10k: print chip id during boot

[Kalle Valo]

This makes it easier to debug what kind of board is used.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 471c219e5137..0077ba17e5c0 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -844,9 +844,12 @@ int ath10k_core_start(struct ath10k *ar)
 	INIT_LIST_HEAD(&ar->arvifs);
 
 	if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
-		ath10k_info("%s (0x%x) fw %s api %d htt %d.%d\n",
-			    ar->hw_params.name, ar->target_version,
-			    ar->hw->wiphy->fw_version, ar->fw_api,
+		ath10k_info("%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d\n",
+			    ar->hw_params.name,
+			    ar->target_version,
+			    ar->chip_id,
+			    ar->hw->wiphy->fw_version,
+			    ar->fw_api,
 			    ar->htt.target_version_major,
 			    ar->htt.target_version_minor);
 

[PATCH v2 8/8] ath10k: print chip id during boot

[Kalle Valo]

This makes it easier to debug what kind of board is used.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 471c219e5137..0077ba17e5c0 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -844,9 +844,12 @@ int ath10k_core_start(struct ath10k *ar)
 	INIT_LIST_HEAD(&ar->arvifs);
 
 	if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
-		ath10k_info("%s (0x%x) fw %s api %d htt %d.%d\n",
-			    ar->hw_params.name, ar->target_version,
-			    ar->hw->wiphy->fw_version, ar->fw_api,
+		ath10k_info("%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d\n",
+			    ar->hw_params.name,
+			    ar->target_version,
+			    ar->chip_id,
+			    ar->hw->wiphy->fw_version,
+			    ar->fw_api,
 			    ar->htt.target_version_major,
 			    ar->htt.target_version_minor);
 


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH v2 0/8] ath10k: small cleanups to pci.c

[Kalle Valo]

Kalle Valo <kvalo@qca.qualcomm.com> writes:

> While looking at the cold reset problem I did some cleanup
> to pci.c.
>
> v2: In patch 1 fix how to check FW_IND_INITIALIZED and also check for 0xffffffff.
>
> ---
>
> Kalle Valo (8):
>       ath10k: cleanup ath10k_pci_wait_for_target_init()
>       ath10k: add module parameter to disable cold reset
>       ath10k: fix name of target_ps module parameter
>       ath10k: advertise only firmware API 2 files
>       ath10k: delete ar_pci->fw_indicator_address
>       ath10k: improve pci debug messages
>       ath10k: add module parameter values to the pci info print
>       ath10k: print chip id during boot

All eight patches applied.

-- 
Kalle Valo

Re: [PATCH v2 0/8] ath10k: small cleanups to pci.c

[Kalle Valo]

Kalle Valo <kvalo@qca.qualcomm.com> writes:

> While looking at the cold reset problem I did some cleanup
> to pci.c.
>
> v2: In patch 1 fix how to check FW_IND_INITIALIZED and also check for 0xffffffff.
>
> ---
>
> Kalle Valo (8):
>       ath10k: cleanup ath10k_pci_wait_for_target_init()
>       ath10k: add module parameter to disable cold reset
>       ath10k: fix name of target_ps module parameter
>       ath10k: advertise only firmware API 2 files
>       ath10k: delete ar_pci->fw_indicator_address
>       ath10k: improve pci debug messages
>       ath10k: add module parameter values to the pci info print
>       ath10k: print chip id during boot

All eight patches applied.

-- 
Kalle Valo

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k