From: Stephen Rothwell <sfr@canb.auug.org.au>
To: Greg KH <greg@kroah.com>, Olof Johansson <olof@lixom.net>,
Arnd Bergmann <arnd@arndb.de>,
<linux-arm-kernel@lists.infradead.org>
Cc: linux-next@vger.kernel.org, linux-kernel@vger.kernel.org,
Russell King <rmk+kernel@arm.linux.org.uk>,
Steffen Trumtrar <s.trumtrar@pengutronix.de>,
Shawn Guo <shawn.guo@linaro.org>
Subject: Re: linux-next: manual merge of the staging tree with the arm-soc tree
Date: Wed, 2 Apr 2014 12:55:57 +1100 [thread overview]
Message-ID: <20140402125557.2d2f48716b8ff79f7042f223@canb.auug.org.au> (raw)
In-Reply-To: <20140225170944.d322d9868871bc2f669b92e5@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 6317 bytes --]
Hi all,
On Tue, 25 Feb 2014 17:09:44 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Today's linux-next merge of the staging tree got a conflict in
> arch/arm/boot/dts/imx53-qsb.dts between commit d5eb195f26fa ("ARM: dts:
> i.MX53: move common QSB nodes to new file") from the arm-soc tree and
> commit 17b5001b5143 ("imx-drm: convert to componentised device support")
> from the staging tree.
These merge fixups are now required when the arm-soc tree is merged with
Linus' tree.
> I fixed it up (see at bottom) and can carry the fix as necessary (no
> action is required). I also added the following fix up patch:
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 25 Feb 2014 17:07:01 +1100
> Subject: [PATCH] ARM: dts: i.MX53: merge fix patch
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> index 2dca98b79f48..5dd37c7c38b8 100644
> --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
> +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> @@ -17,7 +17,7 @@
> reg = <0x70000000 0x40000000>;
> };
>
> - display@di0 {
> + display0: display@di0 {
> compatible = "fsl,imx-parallel-display";
> crtcs = <&ipu 0>;
> interface-pix-fmt = "rgb565";
> --
> 1.9.0
>
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
>
> diff --cc arch/arm/boot/dts/imx53-qsb.dts
> index dec4b073ceb1,3cb4f7791a91..000000000000
> --- a/arch/arm/boot/dts/imx53-qsb.dts
> +++ b/arch/arm/boot/dts/imx53-qsb.dts
> @@@ -16,6 -16,182 +16,11 @@@
> / {
> model = "Freescale i.MX53 Quick Start Board";
> compatible = "fsl,imx53-qsb", "fsl,imx53";
> -
> - memory {
> - reg = <0x70000000 0x40000000>;
> - };
> -
> - display0: display@di0 {
> - compatible = "fsl,imx-parallel-display";
> - crtcs = <&ipu 0>;
> - interface-pix-fmt = "rgb565";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ipu_disp0_1>;
> - status = "disabled";
> - display-timings {
> - claawvga {
> - native-mode;
> - clock-frequency = <27000000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <40>;
> - hfront-porch = <60>;
> - vback-porch = <10>;
> - vfront-porch = <10>;
> - hsync-len = <20>;
> - vsync-len = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> - };
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - power {
> - label = "Power Button";
> - gpios = <&gpio1 8 0>;
> - linux,code = <116>; /* KEY_POWER */
> - };
> -
> - volume-up {
> - label = "Volume Up";
> - gpios = <&gpio2 14 0>;
> - linux,code = <115>; /* KEY_VOLUMEUP */
> - gpio-key,wakeup;
> - };
> -
> - volume-down {
> - label = "Volume Down";
> - gpios = <&gpio2 15 0>;
> - linux,code = <114>; /* KEY_VOLUMEDOWN */
> - gpio-key,wakeup;
> - };
> - };
> -
> + imx-drm {
> + compatible = "fsl,imx-drm";
> + crtcs = <&ipu 0>;
> + connectors = <&display0>;
> + };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_pin_gpio7_7>;
> -
> - user {
> - label = "Heartbeat";
> - gpios = <&gpio7 7 0>;
> - linux,default-trigger = "heartbeat";
> - };
> - };
> -
> - regulators {
> - compatible = "simple-bus";
> -
> - reg_3p2v: 3p2v {
> - compatible = "regulator-fixed";
> - regulator-name = "3P2V";
> - regulator-min-microvolt = <3200000>;
> - regulator-max-microvolt = <3200000>;
> - regulator-always-on;
> - };
> -
> - reg_usb_vbus: usb_vbus {
> - compatible = "regulator-fixed";
> - regulator-name = "usb_vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpio7 8 0>;
> - enable-active-high;
> - };
> - };
> -
> - sound {
> - compatible = "fsl,imx53-qsb-sgtl5000",
> - "fsl,imx-audio-sgtl5000";
> - model = "imx53-qsb-sgtl5000";
> - ssi-controller = <&ssi2>;
> - audio-codec = <&sgtl5000>;
> - audio-routing =
> - "MIC_IN", "Mic Jack",
> - "Mic Jack", "Mic Bias",
> - "Headphone Jack", "HP_OUT";
> - mux-int-port = <2>;
> - mux-ext-port = <5>;
> - };
> -};
> -
> -&esdhc1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc1_1>;
> - status = "okay";
> -};
> -
> -&ssi2 {
> - fsl,mode = "i2s-slave";
> - status = "okay";
> -};
> -
> -&esdhc3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc3_1>;
> - cd-gpios = <&gpio3 11 0>;
> - wp-gpios = <&gpio3 12 0>;
> - bus-width = <8>;
> - status = "okay";
> -};
> -
> -&iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_hog>;
> -
> - hog {
> - pinctrl_hog: hoggrp {
> - fsl,pins = <
> - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
> - MX53_PAD_GPIO_8__GPIO1_8 0x80000000
> - MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
> - MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
> - MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
> - MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
> - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
> - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
> - MX53_PAD_GPIO_16__GPIO7_11 0x80000000
> - >;
> - };
> -
> - led_pin_gpio7_7: led_gpio7_7@0 {
> - fsl,pins = <
> - MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
> - >;
> - };
> - };
> -
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1_1>;
> - status = "okay";
> -};
> -
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2_1>;
> - status = "okay";
> -
> - sgtl5000: codec@0a {
> - compatible = "fsl,sgtl5000";
> - reg = <0x0a>;
> - VDDA-supply = <®_3p2v>;
> - VDDIO-supply = <®_3p2v>;
> - clocks = <&clks 150>;
> - };
> };
>
> &i2c1 {
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Rothwell <sfr@canb.auug.org.au>
To: Greg KH <greg@kroah.com>, Olof Johansson <olof@lixom.net>,
Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org
Cc: linux-next@vger.kernel.org, linux-kernel@vger.kernel.org,
Russell King <rmk+kernel@arm.linux.org.uk>,
Steffen Trumtrar <s.trumtrar@pengutronix.de>,
Shawn Guo <shawn.guo@linaro.org>
Subject: Re: linux-next: manual merge of the staging tree with the arm-soc tree
Date: Wed, 2 Apr 2014 12:55:57 +1100 [thread overview]
Message-ID: <20140402125557.2d2f48716b8ff79f7042f223@canb.auug.org.au> (raw)
In-Reply-To: <20140225170944.d322d9868871bc2f669b92e5@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 6317 bytes --]
Hi all,
On Tue, 25 Feb 2014 17:09:44 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Today's linux-next merge of the staging tree got a conflict in
> arch/arm/boot/dts/imx53-qsb.dts between commit d5eb195f26fa ("ARM: dts:
> i.MX53: move common QSB nodes to new file") from the arm-soc tree and
> commit 17b5001b5143 ("imx-drm: convert to componentised device support")
> from the staging tree.
These merge fixups are now required when the arm-soc tree is merged with
Linus' tree.
> I fixed it up (see at bottom) and can carry the fix as necessary (no
> action is required). I also added the following fix up patch:
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 25 Feb 2014 17:07:01 +1100
> Subject: [PATCH] ARM: dts: i.MX53: merge fix patch
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> index 2dca98b79f48..5dd37c7c38b8 100644
> --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
> +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> @@ -17,7 +17,7 @@
> reg = <0x70000000 0x40000000>;
> };
>
> - display@di0 {
> + display0: display@di0 {
> compatible = "fsl,imx-parallel-display";
> crtcs = <&ipu 0>;
> interface-pix-fmt = "rgb565";
> --
> 1.9.0
>
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
>
> diff --cc arch/arm/boot/dts/imx53-qsb.dts
> index dec4b073ceb1,3cb4f7791a91..000000000000
> --- a/arch/arm/boot/dts/imx53-qsb.dts
> +++ b/arch/arm/boot/dts/imx53-qsb.dts
> @@@ -16,6 -16,182 +16,11 @@@
> / {
> model = "Freescale i.MX53 Quick Start Board";
> compatible = "fsl,imx53-qsb", "fsl,imx53";
> -
> - memory {
> - reg = <0x70000000 0x40000000>;
> - };
> -
> - display0: display@di0 {
> - compatible = "fsl,imx-parallel-display";
> - crtcs = <&ipu 0>;
> - interface-pix-fmt = "rgb565";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ipu_disp0_1>;
> - status = "disabled";
> - display-timings {
> - claawvga {
> - native-mode;
> - clock-frequency = <27000000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <40>;
> - hfront-porch = <60>;
> - vback-porch = <10>;
> - vfront-porch = <10>;
> - hsync-len = <20>;
> - vsync-len = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> - };
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - power {
> - label = "Power Button";
> - gpios = <&gpio1 8 0>;
> - linux,code = <116>; /* KEY_POWER */
> - };
> -
> - volume-up {
> - label = "Volume Up";
> - gpios = <&gpio2 14 0>;
> - linux,code = <115>; /* KEY_VOLUMEUP */
> - gpio-key,wakeup;
> - };
> -
> - volume-down {
> - label = "Volume Down";
> - gpios = <&gpio2 15 0>;
> - linux,code = <114>; /* KEY_VOLUMEDOWN */
> - gpio-key,wakeup;
> - };
> - };
> -
> + imx-drm {
> + compatible = "fsl,imx-drm";
> + crtcs = <&ipu 0>;
> + connectors = <&display0>;
> + };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_pin_gpio7_7>;
> -
> - user {
> - label = "Heartbeat";
> - gpios = <&gpio7 7 0>;
> - linux,default-trigger = "heartbeat";
> - };
> - };
> -
> - regulators {
> - compatible = "simple-bus";
> -
> - reg_3p2v: 3p2v {
> - compatible = "regulator-fixed";
> - regulator-name = "3P2V";
> - regulator-min-microvolt = <3200000>;
> - regulator-max-microvolt = <3200000>;
> - regulator-always-on;
> - };
> -
> - reg_usb_vbus: usb_vbus {
> - compatible = "regulator-fixed";
> - regulator-name = "usb_vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpio7 8 0>;
> - enable-active-high;
> - };
> - };
> -
> - sound {
> - compatible = "fsl,imx53-qsb-sgtl5000",
> - "fsl,imx-audio-sgtl5000";
> - model = "imx53-qsb-sgtl5000";
> - ssi-controller = <&ssi2>;
> - audio-codec = <&sgtl5000>;
> - audio-routing =
> - "MIC_IN", "Mic Jack",
> - "Mic Jack", "Mic Bias",
> - "Headphone Jack", "HP_OUT";
> - mux-int-port = <2>;
> - mux-ext-port = <5>;
> - };
> -};
> -
> -&esdhc1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc1_1>;
> - status = "okay";
> -};
> -
> -&ssi2 {
> - fsl,mode = "i2s-slave";
> - status = "okay";
> -};
> -
> -&esdhc3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc3_1>;
> - cd-gpios = <&gpio3 11 0>;
> - wp-gpios = <&gpio3 12 0>;
> - bus-width = <8>;
> - status = "okay";
> -};
> -
> -&iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_hog>;
> -
> - hog {
> - pinctrl_hog: hoggrp {
> - fsl,pins = <
> - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
> - MX53_PAD_GPIO_8__GPIO1_8 0x80000000
> - MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
> - MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
> - MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
> - MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
> - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
> - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
> - MX53_PAD_GPIO_16__GPIO7_11 0x80000000
> - >;
> - };
> -
> - led_pin_gpio7_7: led_gpio7_7@0 {
> - fsl,pins = <
> - MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
> - >;
> - };
> - };
> -
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1_1>;
> - status = "okay";
> -};
> -
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2_1>;
> - status = "okay";
> -
> - sgtl5000: codec@0a {
> - compatible = "fsl,sgtl5000";
> - reg = <0x0a>;
> - VDDA-supply = <®_3p2v>;
> - VDDIO-supply = <®_3p2v>;
> - clocks = <&clks 150>;
> - };
> };
>
> &i2c1 {
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: sfr@canb.auug.org.au (Stephen Rothwell)
To: linux-arm-kernel@lists.infradead.org
Subject: linux-next: manual merge of the staging tree with the arm-soc tree
Date: Wed, 2 Apr 2014 12:55:57 +1100 [thread overview]
Message-ID: <20140402125557.2d2f48716b8ff79f7042f223@canb.auug.org.au> (raw)
In-Reply-To: <20140225170944.d322d9868871bc2f669b92e5@canb.auug.org.au>
Hi all,
On Tue, 25 Feb 2014 17:09:44 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Today's linux-next merge of the staging tree got a conflict in
> arch/arm/boot/dts/imx53-qsb.dts between commit d5eb195f26fa ("ARM: dts:
> i.MX53: move common QSB nodes to new file") from the arm-soc tree and
> commit 17b5001b5143 ("imx-drm: convert to componentised device support")
> from the staging tree.
These merge fixups are now required when the arm-soc tree is merged with
Linus' tree.
> I fixed it up (see at bottom) and can carry the fix as necessary (no
> action is required). I also added the following fix up patch:
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 25 Feb 2014 17:07:01 +1100
> Subject: [PATCH] ARM: dts: i.MX53: merge fix patch
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> index 2dca98b79f48..5dd37c7c38b8 100644
> --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
> +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> @@ -17,7 +17,7 @@
> reg = <0x70000000 0x40000000>;
> };
>
> - display at di0 {
> + display0: display at di0 {
> compatible = "fsl,imx-parallel-display";
> crtcs = <&ipu 0>;
> interface-pix-fmt = "rgb565";
> --
> 1.9.0
>
> --
> Cheers,
> Stephen Rothwell sfr at canb.auug.org.au
>
> diff --cc arch/arm/boot/dts/imx53-qsb.dts
> index dec4b073ceb1,3cb4f7791a91..000000000000
> --- a/arch/arm/boot/dts/imx53-qsb.dts
> +++ b/arch/arm/boot/dts/imx53-qsb.dts
> @@@ -16,6 -16,182 +16,11 @@@
> / {
> model = "Freescale i.MX53 Quick Start Board";
> compatible = "fsl,imx53-qsb", "fsl,imx53";
> -
> - memory {
> - reg = <0x70000000 0x40000000>;
> - };
> -
> - display0: display at di0 {
> - compatible = "fsl,imx-parallel-display";
> - crtcs = <&ipu 0>;
> - interface-pix-fmt = "rgb565";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ipu_disp0_1>;
> - status = "disabled";
> - display-timings {
> - claawvga {
> - native-mode;
> - clock-frequency = <27000000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <40>;
> - hfront-porch = <60>;
> - vback-porch = <10>;
> - vfront-porch = <10>;
> - hsync-len = <20>;
> - vsync-len = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> - };
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - power {
> - label = "Power Button";
> - gpios = <&gpio1 8 0>;
> - linux,code = <116>; /* KEY_POWER */
> - };
> -
> - volume-up {
> - label = "Volume Up";
> - gpios = <&gpio2 14 0>;
> - linux,code = <115>; /* KEY_VOLUMEUP */
> - gpio-key,wakeup;
> - };
> -
> - volume-down {
> - label = "Volume Down";
> - gpios = <&gpio2 15 0>;
> - linux,code = <114>; /* KEY_VOLUMEDOWN */
> - gpio-key,wakeup;
> - };
> - };
> -
> + imx-drm {
> + compatible = "fsl,imx-drm";
> + crtcs = <&ipu 0>;
> + connectors = <&display0>;
> + };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_pin_gpio7_7>;
> -
> - user {
> - label = "Heartbeat";
> - gpios = <&gpio7 7 0>;
> - linux,default-trigger = "heartbeat";
> - };
> - };
> -
> - regulators {
> - compatible = "simple-bus";
> -
> - reg_3p2v: 3p2v {
> - compatible = "regulator-fixed";
> - regulator-name = "3P2V";
> - regulator-min-microvolt = <3200000>;
> - regulator-max-microvolt = <3200000>;
> - regulator-always-on;
> - };
> -
> - reg_usb_vbus: usb_vbus {
> - compatible = "regulator-fixed";
> - regulator-name = "usb_vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpio7 8 0>;
> - enable-active-high;
> - };
> - };
> -
> - sound {
> - compatible = "fsl,imx53-qsb-sgtl5000",
> - "fsl,imx-audio-sgtl5000";
> - model = "imx53-qsb-sgtl5000";
> - ssi-controller = <&ssi2>;
> - audio-codec = <&sgtl5000>;
> - audio-routing =
> - "MIC_IN", "Mic Jack",
> - "Mic Jack", "Mic Bias",
> - "Headphone Jack", "HP_OUT";
> - mux-int-port = <2>;
> - mux-ext-port = <5>;
> - };
> -};
> -
> -&esdhc1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc1_1>;
> - status = "okay";
> -};
> -
> -&ssi2 {
> - fsl,mode = "i2s-slave";
> - status = "okay";
> -};
> -
> -&esdhc3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc3_1>;
> - cd-gpios = <&gpio3 11 0>;
> - wp-gpios = <&gpio3 12 0>;
> - bus-width = <8>;
> - status = "okay";
> -};
> -
> -&iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_hog>;
> -
> - hog {
> - pinctrl_hog: hoggrp {
> - fsl,pins = <
> - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
> - MX53_PAD_GPIO_8__GPIO1_8 0x80000000
> - MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
> - MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
> - MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
> - MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
> - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
> - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
> - MX53_PAD_GPIO_16__GPIO7_11 0x80000000
> - >;
> - };
> -
> - led_pin_gpio7_7: led_gpio7_7 at 0 {
> - fsl,pins = <
> - MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
> - >;
> - };
> - };
> -
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1_1>;
> - status = "okay";
> -};
> -
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2_1>;
> - status = "okay";
> -
> - sgtl5000: codec at 0a {
> - compatible = "fsl,sgtl5000";
> - reg = <0x0a>;
> - VDDA-supply = <®_3p2v>;
> - VDDIO-supply = <®_3p2v>;
> - clocks = <&clks 150>;
> - };
> };
>
> &i2c1 {
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140402/3610c939/attachment-0001.sig>
next prev parent reply other threads:[~2014-04-02 1:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-25 6:09 linux-next: manual merge of the staging tree with the arm-soc tree Stephen Rothwell
2014-02-25 6:09 ` Stephen Rothwell
2014-02-25 6:09 ` Stephen Rothwell
2014-02-25 16:49 ` Greg KH
2014-02-25 16:49 ` Greg KH
2014-02-25 16:51 ` Olof Johansson
2014-02-25 16:51 ` Olof Johansson
2014-02-25 16:51 ` Olof Johansson
2014-02-25 16:56 ` Greg KH
2014-02-25 16:56 ` Greg KH
2014-02-25 16:56 ` Greg KH
2014-04-02 1:55 ` Stephen Rothwell [this message]
2014-04-02 1:55 ` Stephen Rothwell
2014-04-02 1:55 ` Stephen Rothwell
2014-02-25 6:09 Stephen Rothwell
2014-02-25 6:09 ` Stephen Rothwell
2014-02-25 6:09 ` Stephen Rothwell
2014-03-18 6:10 Stephen Rothwell
2014-03-18 6:10 ` Stephen Rothwell
2014-03-18 6:10 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140402125557.2d2f48716b8ff79f7042f223@canb.auug.org.au \
--to=sfr@canb.auug.org.au \
--cc=arnd@arndb.de \
--cc=greg@kroah.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=olof@lixom.net \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=s.trumtrar@pengutronix.de \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.