[PATCH 03/05] ARM: shmobile: Lager DT reference USB pinmux setup

[PATCH 03/05] ARM: shmobile: Lager DT reference USB pinmux setup

[Magnus Damm]

From: Magnus Damm <damm@opensource.se>

Configure the pinmux on Lager for USB ports via the default
setting. This allows support for USB function on USB0 and
USB Host for USB1 and USB2. Not for upstream merge.

Not-yet-Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/boot/dts/r8a7790-lager.dts |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

--- 0001/arch/arm/boot/dts/r8a7790-lager.dts
+++ work/arch/arm/boot/dts/r8a7790-lager.dts	2014-04-07 13:08:46.000000000 +0900
@@ -146,7 +146,8 @@
 };
 
 &pfc {
-	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
+	pinctrl-0 = <&du_pins &scif0_pins &scif1_pins
+		     &usb0_pins &usb1_pins &usb2_pins>;
 	pinctrl-names = "default";
 
 	du_pins: du {
@@ -199,6 +200,21 @@
 				 "msiof1_tx";
 		renesas,function = "msiof1";
 	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0_ovc_vbus";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	usb2_pins: usb2 {
+		renesas,groups = "usb2";
+		renesas,function = "usb2";
+	};
 };
 
 &ether {