All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
To: Samuel Thibault <samuel.thibault@gnu.org>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH, DoS] slirp (arp): do not special-case bogus IP addresses
Date: Wed, 14 May 2014 00:54:50 +0000	[thread overview]
Message-ID: <20140514005449.GC21821@hostname> (raw)
In-Reply-To: <20140514004420.GV6302@type.youpi.perso.aquilenet.fr>

On Wed, May 14, 2014 at 02:44:20AM +0200, Samuel Thibault wrote:
> Edgar E. Iglesias, le Wed 14 May 2014 00:30:09 +0000, a écrit :
> > > At best I could think of using the patch below, which avoids registering
> > > anything for 0.0.0.0, and use a broadcast to answer a guest which
> > > would have used 0.0.0.0 as a source for whatever reason.  I don't find
> > > anything else reasonable.  What would be preferred?
> > 
> > Specs are not super clear on this but rfc1700 says that 0.0.0.0 is a source only address.
> 
> I agree.
> 
> > What I was trying to suggest was a mix between your two versions.
> > Removing the assert in table_search and avoid adding 0.0.0.0/32 to the cache
> > in table_add. We might need to complement with something that drops datagrams
> > destined to 0.0.0.0 in upper layers so we dont keep trying, not sure.
> > Does something like that make sense?
> 
> So that would be this.
> 
> Samuel


This looks good to me. Minor nit, the comment in if_encap should say
"0.0.0.0 can not be a destination address..."

Cheers,
Edgar

> 
> 
> Do not special-case addresses with zero host part, as we do not
> necessarily know how big it is, and the guest can fake them anyway.
> Silently avoiding having 0.0.0.0 as a destination, however.
> 
> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
> ---
> 
> diff --git a/slirp/arp_table.c b/slirp/arp_table.c
> index ecdb0ba..bcaeb44 100644
> --- a/slirp/arp_table.c
> +++ b/slirp/arp_table.c
> @@ -37,12 +37,7 @@ void arp_table_add(Slirp *slirp, uint32_t ip_addr, uint8_t ethaddr[ETH_ALEN])
>                  ethaddr[0], ethaddr[1], ethaddr[2],
>                  ethaddr[3], ethaddr[4], ethaddr[5]));
>  
> -    /* Check 0.0.0.0/8 invalid source-only addresses */
> -    if ((ip_addr & htonl(~(0xfU << 28))) == 0) {
> -        return;
> -    }
> -
> -    if (ip_addr == 0xffffffff || ip_addr == broadcast_addr) {
> +    if (ip_addr == 0 || ip_addr == 0xffffffff || ip_addr == broadcast_addr) {
>          /* Do not register broadcast addresses */
>          return;
>      }
> @@ -73,9 +68,6 @@ bool arp_table_search(Slirp *slirp, uint32_t ip_addr,
>      DEBUG_CALL("arp_table_search");
>      DEBUG_ARG("ip = 0x%x", ip_addr);
>  
> -    /* Check 0.0.0.0/8 invalid source-only addresses */
> -    assert((ip_addr & htonl(~(0xfU << 28))) != 0);
> -
>      /* If broadcast address */
>      if (ip_addr == 0xffffffff || ip_addr == broadcast_addr) {
>          /* return Ethernet broadcast address */
> diff --git a/slirp/slirp.c b/slirp/slirp.c
> index 3fb48a4..2f189e0 100644
> --- a/slirp/slirp.c
> +++ b/slirp/slirp.c
> @@ -778,6 +778,11 @@ int if_encap(Slirp *slirp, struct mbuf *ifm)
>          return 1;
>      }
>  
> +    if (!iph->ip_dst.s_addr) {
> +        /* 0.0.0.0 can not be a source address, something went wrong, avoid
> +         * making it worse */
> +        return 1;
> +    }
>      if (!arp_table_search(slirp, iph->ip_dst.s_addr, ethaddr)) {
>          uint8_t arp_req[ETH_HLEN + sizeof(struct arphdr)];
>          struct ethhdr *reh = (struct ethhdr *)arp_req;

> diff --git a/slirp/arp_table.c b/slirp/arp_table.c
> index ecdb0ba..bcaeb44 100644
> --- a/slirp/arp_table.c
> +++ b/slirp/arp_table.c
> @@ -37,12 +37,7 @@ void arp_table_add(Slirp *slirp, uint32_t ip_addr, uint8_t ethaddr[ETH_ALEN])
>                  ethaddr[0], ethaddr[1], ethaddr[2],
>                  ethaddr[3], ethaddr[4], ethaddr[5]));
>  
> -    /* Check 0.0.0.0/8 invalid source-only addresses */
> -    if ((ip_addr & htonl(~(0xfU << 28))) == 0) {
> -        return;
> -    }
> -
> -    if (ip_addr == 0xffffffff || ip_addr == broadcast_addr) {
> +    if (ip_addr == 0 || ip_addr == 0xffffffff || ip_addr == broadcast_addr) {
>          /* Do not register broadcast addresses */
>          return;
>      }
> @@ -73,9 +68,6 @@ bool arp_table_search(Slirp *slirp, uint32_t ip_addr,
>      DEBUG_CALL("arp_table_search");
>      DEBUG_ARG("ip = 0x%x", ip_addr);
>  
> -    /* Check 0.0.0.0/8 invalid source-only addresses */
> -    assert((ip_addr & htonl(~(0xfU << 28))) != 0);
> -
>      /* If broadcast address */
>      if (ip_addr == 0xffffffff || ip_addr == broadcast_addr) {
>          /* return Ethernet broadcast address */
> diff --git a/slirp/slirp.c b/slirp/slirp.c
> index 3fb48a4..2f189e0 100644
> --- a/slirp/slirp.c
> +++ b/slirp/slirp.c
> @@ -778,6 +778,11 @@ int if_encap(Slirp *slirp, struct mbuf *ifm)
>          return 1;
>      }
>  
> +    if (!iph->ip_dst.s_addr) {
> +        /* 0.0.0.0 can not a a source address, something went wrong, avoid
> +         * making it it worse */
> +        return 1;
> +    }
>      if (!arp_table_search(slirp, iph->ip_dst.s_addr, ethaddr)) {
>          uint8_t arp_req[ETH_HLEN + sizeof(struct arphdr)];
>          struct ethhdr *reh = (struct ethhdr *)arp_req;

  reply	other threads:[~2014-05-14  0:54 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-30 22:22 [Qemu-devel] [PATCHv4 00/18] slirp: Adding IPv6 support to Qemu -net user mode Samuel Thibault
2014-03-30 22:22 ` [Qemu-devel] [PATCH 01/18] slirp: goto bad in udp_input if sosendto fails Samuel Thibault
2014-05-07 22:15   ` [Qemu-devel] [PATCH, DoS] slirp (arp): do not special-case bogus IP addresses Samuel Thibault
2014-05-08  6:10     ` Edgar E. Iglesias
2014-05-08  6:50       ` Samuel Thibault
2014-05-08  6:59         ` Edgar E. Iglesias
2014-05-13 22:15           ` Samuel Thibault
2014-05-14  0:30             ` Edgar E. Iglesias
2014-05-14  0:44               ` Samuel Thibault
2014-05-14  0:54                 ` Edgar E. Iglesias [this message]
2014-05-14  1:11                   ` Samuel Thibault
2014-05-14  1:13     ` [Qemu-devel] [PATCHv2, " Samuel Thibault
2014-05-14  1:22       ` Edgar E. Iglesias
     [not found]         ` <20140527231002.GB3396@toto>
2014-06-12  5:48           ` Jan Kiszka
2014-06-09  0:01       ` Edgar E. Iglesias
2014-03-30 22:22 ` [Qemu-devel] [PATCH 02/18] slirp: Generalizing and neutralizing code before adding IPv6 stuff Samuel Thibault
2014-03-30 22:22 ` [Qemu-devel] [PATCH 03/18] slirp: Reindent after refactoring Samuel Thibault
2014-03-30 22:22 ` [Qemu-devel] [PATCH 04/18] slirp: Make Socket structure IPv6 compatible Samuel Thibault
2014-03-30 22:22 ` [Qemu-devel] [PATCH 05/18] slirp: Factorizing address translation Samuel Thibault
2014-03-30 22:22 ` [Qemu-devel] [PATCH 06/18] slirp: Factorizing and cleaning solookup() Samuel Thibault
2014-03-30 22:22 ` [Qemu-devel] [PATCH 07/18] slirp: Make udp_attach IPv6 compatible Samuel Thibault
2014-03-30 22:22 ` [Qemu-devel] [PATCH 08/18] slirp: Adding family argument to tcp_fconnect() Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 09/18] qemu/timer.h : Adding function to second scale Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 10/18] slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfiguration Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 11/18] slirp: Adding ICMPv6 error sending Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 12/18] slirp: Adding IPv6 UDP support Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 13/18] slirp: Factorizing tcpiphdr structure with an union Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 14/18] slirp: Generalizing and neutralizing various TCP functions before adding IPv6 stuff Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 15/18] slirp: Reindent after refactoring Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 16/18] slirp: Handle IPv6 in TCP functions Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 17/18] slirp: Adding IPv6 address for DNS relay Samuel Thibault
2014-03-30 22:23 ` [Qemu-devel] [PATCH 18/18] qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses Samuel Thibault

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140514005449.GC21821@hostname \
    --to=edgar.iglesias@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=samuel.thibault@gnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.