* [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
@ 2014-05-30 6:18 Jérôme Carretero
2014-06-03 18:02 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Jérôme Carretero @ 2014-05-30 6:18 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, linux-kernel, Alex Williamson
This device normally comes with a proprietary driver, using a web GUI
to configure RAID:
http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver,
being just a Marvell 88SE9235.
Devices 640L, 644L, 644LS should also be supported but not tested here.
Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu>
---
drivers/ata/ahci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6070781..ff5543f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -449,6 +449,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
.driver_data = board_ahci_yes_fbs },
+ { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642,
+ .driver_data = board_ahci_yes_fbs },
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
--
1.9.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
2014-05-30 6:18 [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L Jérôme Carretero
@ 2014-06-03 18:02 ` Tejun Heo
2014-06-03 18:41 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2014-06-03 18:02 UTC (permalink / raw)
To: Jérôme Carretero; +Cc: linux-ide, linux-kernel, Alex Williamson
On Fri, May 30, 2014 at 02:18:33AM -0400, Jérôme Carretero wrote:
> This device normally comes with a proprietary driver, using a web GUI
> to configure RAID:
> http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
> But thankfully it also works out of the box with the AHCI driver,
> being just a Marvell 88SE9235.
>
> Devices 640L, 644L, 644LS should also be supported but not tested here.
>
> Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Applied to libata/for-3.16 w/ stable cc'd.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
2014-06-03 18:02 ` Tejun Heo
@ 2014-06-03 18:41 ` Tejun Heo
2014-06-03 18:47 ` Jérôme Carretero
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2014-06-03 18:41 UTC (permalink / raw)
To: Jérôme Carretero; +Cc: linux-ide, linux-kernel, Alex Williamson
On Tue, Jun 03, 2014 at 02:02:36PM -0400, Tejun Heo wrote:
> On Fri, May 30, 2014 at 02:18:33AM -0400, Jérôme Carretero wrote:
> > This device normally comes with a proprietary driver, using a web GUI
> > to configure RAID:
> > http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
> > But thankfully it also works out of the box with the AHCI driver,
> > being just a Marvell 88SE9235.
> >
> > Devices 640L, 644L, 644LS should also be supported but not tested here.
> >
> > Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu>
>
> Applied to libata/for-3.16 w/ stable cc'd.
Ugh... build failure from missing ')'. Please at least try to compile
the changes before submitting patches.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
2014-06-03 18:47 ` Jérôme Carretero
@ 2014-06-03 18:47 ` Tejun Heo
0 siblings, 0 replies; 7+ messages in thread
From: Tejun Heo @ 2014-06-03 18:47 UTC (permalink / raw)
To: Jérôme Carretero; +Cc: linux-ide, linux-kernel, Alex Williamson
On Tue, Jun 03, 2014 at 02:47:58PM -0400, Jérôme Carretero wrote:
> Argh. Sorry, I hadn't used git send-mail and missed the copy/paste...
> Shall I send a corrected version or you fixed it?
Yes, please.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
2014-06-03 18:41 ` Tejun Heo
@ 2014-06-03 18:47 ` Jérôme Carretero
2014-06-03 18:47 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Jérôme Carretero @ 2014-06-03 18:47 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, linux-kernel, Alex Williamson
On Tue, 3 Jun 2014 14:41:40 -0400
Tejun Heo <tj@kernel.org> wrote:
> Ugh... build failure from missing ')'. Please at least try to compile
> the changes before submitting patches.
Argh. Sorry, I hadn't used git send-mail and missed the copy/paste...
Shall I send a corrected version or you fixed it?
--
Jérôme
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
@ 2014-06-03 18:56 Jérôme Carretero
2014-06-03 18:56 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Jérôme Carretero @ 2014-06-03 18:56 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, linux-kernel, Alex Williamson
This device normally comes with a proprietary driver, using a web GUI
to configure RAID:
http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver,
being just a Marvell 88SE9235.
Devices 640L, 644L, 644LS should also be supported but not tested here.
Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu>
---
drivers/ata/ahci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6070781..ff5543f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -449,6 +449,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
.driver_data = board_ahci_yes_fbs },
+ { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642),
+ .driver_data = board_ahci_yes_fbs },
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
--
1.9.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L
2014-06-03 18:56 Jérôme Carretero
@ 2014-06-03 18:56 ` Tejun Heo
0 siblings, 0 replies; 7+ messages in thread
From: Tejun Heo @ 2014-06-03 18:56 UTC (permalink / raw)
To: Jérôme Carretero; +Cc: linux-ide, linux-kernel, Alex Williamson
On Tue, Jun 03, 2014 at 02:56:25PM -0400, Jérôme Carretero wrote:
> This device normally comes with a proprietary driver, using a web GUI
> to configure RAID:
> http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
> But thankfully it also works out of the box with the AHCI driver,
> being just a Marvell 88SE9235.
>
> Devices 640L, 644L, 644LS should also be supported but not tested here.
>
> Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Applied to libata/for-3.16 w/ stable cc'd.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-06-03 18:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-30 6:18 [PATCH] ahci: Add Device ID for HighPoint RocketRaid 642L Jérôme Carretero
2014-06-03 18:02 ` Tejun Heo
2014-06-03 18:41 ` Tejun Heo
2014-06-03 18:47 ` Jérôme Carretero
2014-06-03 18:47 ` Tejun Heo
2014-06-03 18:56 Jérôme Carretero
2014-06-03 18:56 ` Tejun Heo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.