[PATCH RESEND 00/12] Add Flexgen Clock support

[PATCH RESEND 00/12] Add Flexgen Clock support

[Gabriel FERNANDEZ]

The goal of this series is to add Flexgen clock support to ST SoCs.

A Flexgen clock is composed by:
  - a clock cross bar (represented by a mux element)
  - a pre and final dividers (represented by a divider and gate elements)

Tested on B2020 board.

Gabriel Fernandez (12):
  clk: st: Update ST clock binding documentation
  clk: st: Adds Flexgen clock binding
  drivers: clk: st: STiH407: Support for Flexgen Clocks
  drivers: clk: st: STiH407: Support for A9 MUX Clocks
  drivers: clk: st: STiH407: Support for clockgenA0
  drivers: clk: st: Add polarity bit indication
  drivers: clk: st: Add quadfs reset handling
  drivers: clk: st: STiH407: Support for clockgenC0
  drivers: clk: st: STiH407: Support for clockgenD0/D2/D3
  drivers: clk: st: STiH407: Support for clockgenA9
  drivers: clk: st: Update frequency tables for fs660c32 and fs432c65
  drivers: clk: st: Use round to closest divider flag

 .../devicetree/bindings/clock/st/st,clkgen-mux.txt |   2 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt |   5 +-
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  25 +-
 .../devicetree/bindings/clock/st/st,flexgen.txt    |  48 +++
 .../devicetree/bindings/clock/st/st,quadfs.txt     |   3 +
 drivers/clk/st/Makefile                            |   2 +-
 drivers/clk/st/clk-flexgen.c                       | 332 +++++++++++++++++++++
 drivers/clk/st/clkgen-fsyn.c                       | 175 ++++++++++-
 drivers/clk/st/clkgen-mux.c                        |  12 +-
 drivers/clk/st/clkgen-pll.c                        |  64 ++++
 10 files changed, 647 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt
 create mode 100644 drivers/clk/st/clk-flexgen.c

-- 
1.9.1

[PATCH RESEND 00/12] Add Flexgen Clock support

[Gabriel FERNANDEZ]

The goal of this series is to add Flexgen clock support to ST SoCs.

A Flexgen clock is composed by:
  - a clock cross bar (represented by a mux element)
  - a pre and final dividers (represented by a divider and gate elements)

Tested on B2020 board.

Gabriel Fernandez (12):
  clk: st: Update ST clock binding documentation
  clk: st: Adds Flexgen clock binding
  drivers: clk: st: STiH407: Support for Flexgen Clocks
  drivers: clk: st: STiH407: Support for A9 MUX Clocks
  drivers: clk: st: STiH407: Support for clockgenA0
  drivers: clk: st: Add polarity bit indication
  drivers: clk: st: Add quadfs reset handling
  drivers: clk: st: STiH407: Support for clockgenC0
  drivers: clk: st: STiH407: Support for clockgenD0/D2/D3
  drivers: clk: st: STiH407: Support for clockgenA9
  drivers: clk: st: Update frequency tables for fs660c32 and fs432c65
  drivers: clk: st: Use round to closest divider flag

 .../devicetree/bindings/clock/st/st,clkgen-mux.txt |   2 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt |   5 +-
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  25 +-
 .../devicetree/bindings/clock/st/st,flexgen.txt    |  48 +++
 .../devicetree/bindings/clock/st/st,quadfs.txt     |   3 +
 drivers/clk/st/Makefile                            |   2 +-
 drivers/clk/st/clk-flexgen.c                       | 332 +++++++++++++++++++++
 drivers/clk/st/clkgen-fsyn.c                       | 175 ++++++++++-
 drivers/clk/st/clkgen-mux.c                        |  12 +-
 drivers/clk/st/clkgen-pll.c                        |  64 ++++
 10 files changed, 647 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt
 create mode 100644 drivers/clk/st/clk-flexgen.c

-- 
1.9.1

[PATCH RESEND 00/12] Add Flexgen Clock support

[Gabriel FERNANDEZ]

The goal of this series is to add Flexgen clock support to ST SoCs.

A Flexgen clock is composed by:
  - a clock cross bar (represented by a mux element)
  - a pre and final dividers (represented by a divider and gate elements)

Tested on B2020 board.

Gabriel Fernandez (12):
  clk: st: Update ST clock binding documentation
  clk: st: Adds Flexgen clock binding
  drivers: clk: st: STiH407: Support for Flexgen Clocks
  drivers: clk: st: STiH407: Support for A9 MUX Clocks
  drivers: clk: st: STiH407: Support for clockgenA0
  drivers: clk: st: Add polarity bit indication
  drivers: clk: st: Add quadfs reset handling
  drivers: clk: st: STiH407: Support for clockgenC0
  drivers: clk: st: STiH407: Support for clockgenD0/D2/D3
  drivers: clk: st: STiH407: Support for clockgenA9
  drivers: clk: st: Update frequency tables for fs660c32 and fs432c65
  drivers: clk: st: Use round to closest divider flag

 .../devicetree/bindings/clock/st/st,clkgen-mux.txt |   2 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt |   5 +-
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  25 +-
 .../devicetree/bindings/clock/st/st,flexgen.txt    |  48 +++
 .../devicetree/bindings/clock/st/st,quadfs.txt     |   3 +
 drivers/clk/st/Makefile                            |   2 +-
 drivers/clk/st/clk-flexgen.c                       | 332 +++++++++++++++++++++
 drivers/clk/st/clkgen-fsyn.c                       | 175 ++++++++++-
 drivers/clk/st/clkgen-mux.c                        |  12 +-
 drivers/clk/st/clkgen-pll.c                        |  64 ++++
 10 files changed, 647 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt
 create mode 100644 drivers/clk/st/clk-flexgen.c

-- 
1.9.1

[PATCH RESEND 01/12] clk: st: Update ST clock binding documentation

[Gabriel FERNANDEZ]

This patch adds new compatibilities to support STiH407 SoC.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 .../devicetree/bindings/clock/st/st,clkgen-mux.txt   |  2 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt   |  5 ++++-
 .../devicetree/bindings/clock/st/st,clkgen.txt       | 20 ++++++++++++++++----
 .../devicetree/bindings/clock/st/st,quadfs.txt       |  3 +++
 4 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index 943e080..2d92fc8 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -17,7 +17,7 @@ Required properties:
 	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
 	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
 	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
-
+	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
 
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index 81eb385..b852925 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -19,11 +19,14 @@ Required properties:
 	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 
-
 - #clock-cells : From common clock binding; shall be set to 1.
 
 - clocks : From common clock binding
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 49ec5ae..55506c2 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -24,16 +24,28 @@ address is common of all subnode.
 		quadfs_node {
 			...
 		};
+
+		mux_node {
+			...
+		};
+
+		vcc_node {
+			...
+		};
 		...
 	};
 
 This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[4]
+Each subnode should use the binding discribe in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+
 
 Required properties:
 - reg : A Base address and length of the register set.
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index ec86d62..c0a4045 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -15,6 +15,9 @@ Required properties:
   "st,stih416-quadfs432",	"st,quadfs"
   "st,stih416-quadfs660-E",	"st,quadfs"
   "st,stih416-quadfs660-F",	"st,quadfs"
+  "st,stih407-quadfs660-C",	"st,quadfs"
+  "st,stih407-quadfs660-D",	"st,quadfs"
+
 
 - #clock-cells : from common clock binding; shall be set to 1.
 
-- 
1.9.1

[PATCH RESEND 01/12] clk: st: Update ST clock binding documentation

[Gabriel FERNANDEZ]

This patch adds new compatibilities to support STiH407 SoC.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 .../devicetree/bindings/clock/st/st,clkgen-mux.txt   |  2 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt   |  5 ++++-
 .../devicetree/bindings/clock/st/st,clkgen.txt       | 20 ++++++++++++++++----
 .../devicetree/bindings/clock/st/st,quadfs.txt       |  3 +++
 4 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index 943e080..2d92fc8 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -17,7 +17,7 @@ Required properties:
 	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
 	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
 	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
-
+	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
 
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index 81eb385..b852925 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -19,11 +19,14 @@ Required properties:
 	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 
-
 - #clock-cells : From common clock binding; shall be set to 1.
 
 - clocks : From common clock binding
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 49ec5ae..55506c2 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -24,16 +24,28 @@ address is common of all subnode.
 		quadfs_node {
 			...
 		};
+
+		mux_node {
+			...
+		};
+
+		vcc_node {
+			...
+		};
 		...
 	};
 
 This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[4]
+Each subnode should use the binding discribe in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+
 
 Required properties:
 - reg : A Base address and length of the register set.
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index ec86d62..c0a4045 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -15,6 +15,9 @@ Required properties:
   "st,stih416-quadfs432",	"st,quadfs"
   "st,stih416-quadfs660-E",	"st,quadfs"
   "st,stih416-quadfs660-F",	"st,quadfs"
+  "st,stih407-quadfs660-C",	"st,quadfs"
+  "st,stih407-quadfs660-D",	"st,quadfs"
+
 
 - #clock-cells : from common clock binding; shall be set to 1.
 
-- 
1.9.1

[PATCH RESEND 01/12] clk: st: Update ST clock binding documentation

[Gabriel FERNANDEZ]

This patch adds new compatibilities to support STiH407 SoC.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 .../devicetree/bindings/clock/st/st,clkgen-mux.txt   |  2 +-
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt   |  5 ++++-
 .../devicetree/bindings/clock/st/st,clkgen.txt       | 20 ++++++++++++++++----
 .../devicetree/bindings/clock/st/st,quadfs.txt       |  3 +++
 4 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index 943e080..2d92fc8 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -17,7 +17,7 @@ Required properties:
 	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
 	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
 	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
-
+	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
 
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index 81eb385..b852925 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -19,11 +19,14 @@ Required properties:
 	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 
-
 - #clock-cells : From common clock binding; shall be set to 1.
 
 - clocks : From common clock binding
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 49ec5ae..55506c2 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -24,16 +24,28 @@ address is common of all subnode.
 		quadfs_node {
 			...
 		};
+
+		mux_node {
+			...
+		};
+
+		vcc_node {
+			...
+		};
 		...
 	};
 
 This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[4]
+Each subnode should use the binding discribe in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+
 
 Required properties:
 - reg : A Base address and length of the register set.
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index ec86d62..c0a4045 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -15,6 +15,9 @@ Required properties:
   "st,stih416-quadfs432",	"st,quadfs"
   "st,stih416-quadfs660-E",	"st,quadfs"
   "st,stih416-quadfs660-F",	"st,quadfs"
+  "st,stih407-quadfs660-C",	"st,quadfs"
+  "st,stih407-quadfs660-D",	"st,quadfs"
+
 
 - #clock-cells : from common clock binding; shall be set to 1.
 
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 01/12] clk: st: Update ST clock binding documentation

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch adds new compatibilities to support STiH407 SoC.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  .../devicetree/bindings/clock/st/st,clkgen-mux.txt   |  2 +-
>  .../devicetree/bindings/clock/st/st,clkgen-pll.txt   |  5 ++++-
>  .../devicetree/bindings/clock/st/st,clkgen.txt       | 20 ++++++++++++++++----
>  .../devicetree/bindings/clock/st/st,quadfs.txt       |  3 +++
>  4 files changed, 24 insertions(+), 6 deletions(-)

Acked-by: Peter Griffin <peter.griffin@st.com>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 01/12] clk: st: Update ST clock binding documentation

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch adds new compatibilities to support STiH407 SoC.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  .../devicetree/bindings/clock/st/st,clkgen-mux.txt   |  2 +-
>  .../devicetree/bindings/clock/st/st,clkgen-pll.txt   |  5 ++++-
>  .../devicetree/bindings/clock/st/st,clkgen.txt       | 20 ++++++++++++++++----
>  .../devicetree/bindings/clock/st/st,quadfs.txt       |  3 +++
>  4 files changed, 24 insertions(+), 6 deletions(-)

Acked-by: Peter Griffin <peter.griffin@st.com>

Regards,

Peter

Re: [STLinux Kernel] [PATCH RESEND 01/12] clk: st: Update ST clock binding documentation

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch adds new compatibilities to support STiH407 SoC.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  .../devicetree/bindings/clock/st/st,clkgen-mux.txt   |  2 +-
>  .../devicetree/bindings/clock/st/st,clkgen-pll.txt   |  5 ++++-
>  .../devicetree/bindings/clock/st/st,clkgen.txt       | 20 ++++++++++++++++----
>  .../devicetree/bindings/clock/st/st,quadfs.txt       |  3 +++
>  4 files changed, 24 insertions(+), 6 deletions(-)

Acked-by: Peter Griffin <peter.griffin-qxv4g6HH51o@public.gmane.org>

Regards,

Peter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH RESEND 02/12] clk: st: Adds Flexgen clock binding

[Gabriel FERNANDEZ]

A Flexgen structure is composed by:
- a clock cross bar (represented by a mux element)
- a pre and final dividers (represented by a divider and gate elements)

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  5 +++
 .../devicetree/bindings/clock/st/st,flexgen.txt    | 48 ++++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 55506c2..afb65e6 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -32,6 +32,10 @@ address is common of all subnode.
 		vcc_node {
 			...
 		};
+
+		flexgen_node {
+			...
+		};
 		...
 	};
 
@@ -45,6 +49,7 @@ Each subnode should use the binding discribe in [2]..[7]
 [5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
 [6] Documentation/devicetree/bindings/clock/st,vcc.txt
 [7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
 
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
new file mode 100644
index 0000000..ce908dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,48 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       4 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clockgenD2@x9106000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x9106000 0x1000>;
+
+		CLK_S_D2_FLEXGEN: CLK_S_D2_FLEXGEN {
+			compatible = "st,flexgen";
+
+			#clock-cells = <1>;
+			clocks = <&CLK_S_D2_QUADFS 0>,
+				 <&CLK_S_D2_QUADFS 1>,
+				 <&CLK_S_D2_QUADFS 2>,
+				 <&CLK_S_D2_QUADFS 3>;
+
+			clock-output-names = "CLK_PIX_MAIN_DISP",
+					     "CLK_PIX_PIP",
+					     "CLK_PIX_GDP1",
+					     "CLK_PIX_GDP2";
+		};
+	};
-- 
1.9.1

[PATCH RESEND 02/12] clk: st: Adds Flexgen clock binding

[Gabriel FERNANDEZ]

A Flexgen structure is composed by:
- a clock cross bar (represented by a mux element)
- a pre and final dividers (represented by a divider and gate elements)

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 .../devicetree/bindings/clock/st/st,clkgen.txt     |  5 +++
 .../devicetree/bindings/clock/st/st,flexgen.txt    | 48 ++++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/st/st,flexgen.txt

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 55506c2..afb65e6 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -32,6 +32,10 @@ address is common of all subnode.
 		vcc_node {
 			...
 		};
+
+		flexgen_node {
+			...
+		};
 		...
 	};
 
@@ -45,6 +49,7 @@ Each subnode should use the binding discribe in [2]..[7]
 [5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
 [6] Documentation/devicetree/bindings/clock/st,vcc.txt
 [7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
 
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
new file mode 100644
index 0000000..ce908dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,48 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       4 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clockgenD2 at x9106000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x9106000 0x1000>;
+
+		CLK_S_D2_FLEXGEN: CLK_S_D2_FLEXGEN {
+			compatible = "st,flexgen";
+
+			#clock-cells = <1>;
+			clocks = <&CLK_S_D2_QUADFS 0>,
+				 <&CLK_S_D2_QUADFS 1>,
+				 <&CLK_S_D2_QUADFS 2>,
+				 <&CLK_S_D2_QUADFS 3>;
+
+			clock-output-names = "CLK_PIX_MAIN_DISP",
+					     "CLK_PIX_PIP",
+					     "CLK_PIX_GDP1",
+					     "CLK_PIX_GDP2";
+		};
+	};
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 02/12] clk: st: Adds Flexgen clock binding

[Peter Griffin]

Hi Gabi,

> +Example:
> +
> +	clockgenD2@x9106000 {
> +		compatible = "st,clkgen-c32";
> +		reg = <0x9106000 0x1000>;
> +
> +		CLK_S_D2_FLEXGEN: CLK_S_D2_FLEXGEN {
> +			compatible = "st,flexgen";
> +
> +			#clock-cells = <1>;
> +			clocks = <&CLK_S_D2_QUADFS 0>,
> +				 <&CLK_S_D2_QUADFS 1>,
> +				 <&CLK_S_D2_QUADFS 2>,
> +				 <&CLK_S_D2_QUADFS 3>;
> +
> +			clock-output-names = "CLK_PIX_MAIN_DISP",
> +					     "CLK_PIX_PIP",
> +					     "CLK_PIX_GDP1",
> +					     "CLK_PIX_GDP2";

With the upper case to lower case renaming of the STI device tree
this example also needs to be converted to lower case names 
throughout.

Once rectified you can add my:
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

regards,

Peter.

[STLinux Kernel] [PATCH RESEND 02/12] clk: st: Adds Flexgen clock binding

[Peter Griffin]

Hi Gabi,

> +Example:
> +
> +	clockgenD2 at x9106000 {
> +		compatible = "st,clkgen-c32";
> +		reg = <0x9106000 0x1000>;
> +
> +		CLK_S_D2_FLEXGEN: CLK_S_D2_FLEXGEN {
> +			compatible = "st,flexgen";
> +
> +			#clock-cells = <1>;
> +			clocks = <&CLK_S_D2_QUADFS 0>,
> +				 <&CLK_S_D2_QUADFS 1>,
> +				 <&CLK_S_D2_QUADFS 2>,
> +				 <&CLK_S_D2_QUADFS 3>;
> +
> +			clock-output-names = "CLK_PIX_MAIN_DISP",
> +					     "CLK_PIX_PIP",
> +					     "CLK_PIX_GDP1",
> +					     "CLK_PIX_GDP2";

With the upper case to lower case renaming of the STI device tree
this example also needs to be converted to lower case names 
throughout.

Once rectified you can add my:
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

regards,

Peter.

[PATCH RESEND 03/12] drivers: clk: st: STiH407: Support for Flexgen Clocks

[Gabriel FERNANDEZ]

This patch is the Flexgen implementation reusing as much as possible
of Common Clock Framework functions.

The idea is to have an instance of "struct flexgen" per output clock.
It represents the clock cross bar (by a mux element), and the pre and final dividers
(using dividers and gates elements).

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/Makefile      |   2 +-
 drivers/clk/st/clk-flexgen.c | 332 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 333 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/st/clk-flexgen.c

diff --git a/drivers/clk/st/Makefile b/drivers/clk/st/Makefile
index c7455ff..ede7b2f 100644
--- a/drivers/clk/st/Makefile
+++ b/drivers/clk/st/Makefile
@@ -1 +1 @@
-obj-y += clkgen-mux.o clkgen-pll.o clkgen-fsyn.o
+obj-y += clkgen-mux.o clkgen-pll.o clkgen-fsyn.o clk-flexgen.o
diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
new file mode 100644
index 0000000..f3ed700
--- /dev/null
+++ b/drivers/clk/st/clk-flexgen.c
@@ -0,0 +1,332 @@
+/*
+ * clk-flexgen.c
+ *
+ * Copyright (C) ST-Microelectronics SA 2013
+ * Author:  Maxime Coquelin <maxime.coquelin@st.com> for ST-Microelectronics.
+ * License terms:  GNU General Public License (GPL), version 2  */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct flexgen {
+	struct clk_hw hw;
+
+	/* Crossbar */
+	struct clk_mux mux;
+	/* Pre-divisor's gate */
+	struct clk_gate pgate;
+	/* Pre-divisor */
+	struct clk_divider pdiv;
+	/* Final divisor's gate */
+	struct clk_gate fgate;
+	/* Final divisor */
+	struct clk_divider fdiv;
+};
+
+#define to_flexgen(_hw) container_of(_hw, struct flexgen, hw)
+
+static int flexgen_enable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pgate_hw = &flexgen->pgate.hw;
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	pgate_hw->clk = hw->clk;
+	fgate_hw->clk = hw->clk;
+
+	clk_gate_ops.enable(pgate_hw);
+
+	clk_gate_ops.enable(fgate_hw);
+
+	pr_debug("%s: flexgen output enabled\n", __clk_get_name(hw->clk));
+	return 0;
+}
+
+static void flexgen_disable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	/* disable only the final gate */
+	fgate_hw->clk = hw->clk;
+
+	clk_gate_ops.disable(fgate_hw);
+
+	pr_debug("%s: flexgen output disabled\n", __clk_get_name(hw->clk));
+}
+
+static int flexgen_is_enabled(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	fgate_hw->clk = hw->clk;
+
+	if (!clk_gate_ops.is_enabled(fgate_hw))
+		return 0;
+
+	return 1;
+}
+
+static u8 flexgen_get_parent(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	mux_hw->clk = hw->clk;
+
+	return clk_mux_ops.get_parent(mux_hw);
+}
+
+static int flexgen_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	mux_hw->clk = hw->clk;
+
+	return clk_mux_ops.set_parent(mux_hw, index);
+}
+
+static inline unsigned long
+clk_best_div(unsigned long parent_rate, unsigned long rate)
+{
+	return parent_rate / rate + ((rate > (2*(parent_rate % rate))) ? 0 : 1);
+}
+
+static long flexgen_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	unsigned long div;
+
+	/* Round div according to exact prate and wished rate */
+	div = clk_best_div(*prate, rate);
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		*prate = rate * div;
+		return rate;
+	} else
+		return *prate / div;
+}
+
+unsigned long flexgen_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	unsigned long mid_rate;
+
+	pdiv_hw->clk = hw->clk;
+	fdiv_hw->clk = hw->clk;
+
+	mid_rate = clk_divider_ops.recalc_rate(pdiv_hw, parent_rate);
+
+	return clk_divider_ops.recalc_rate(fdiv_hw, mid_rate);
+}
+
+static int flexgen_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	unsigned long primary_div = 0;
+	int ret = 0;
+
+	pdiv_hw->clk = hw->clk;
+	fdiv_hw->clk = hw->clk;
+
+	primary_div = clk_best_div(parent_rate, rate);
+
+	clk_divider_ops.set_rate(fdiv_hw, parent_rate, parent_rate);
+	ret = clk_divider_ops.set_rate(pdiv_hw, rate, rate * primary_div);
+
+	return ret;
+}
+
+static const struct clk_ops flexgen_ops = {
+	.enable = flexgen_enable,
+	.disable = flexgen_disable,
+	.is_enabled = flexgen_is_enabled,
+	.get_parent = flexgen_get_parent,
+	.set_parent = flexgen_set_parent,
+	.round_rate = flexgen_round_rate,
+	.recalc_rate = flexgen_recalc_rate,
+	.set_rate = flexgen_set_rate,
+};
+
+struct clk *clk_register_flexgen(const char *name,
+				const char **parent_names, u8 num_parents,
+				void __iomem *reg, spinlock_t *lock, u32 idx,
+				unsigned long flexgen_flags) {
+	struct flexgen *fgxbar;
+	struct clk *clk;
+	struct clk_init_data init;
+	u32  xbar_shift;
+	void __iomem *xbar_reg, *fdiv_reg;
+
+	fgxbar = kzalloc(sizeof(struct flexgen), GFP_KERNEL);
+	if (!fgxbar)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &flexgen_ops;
+	init.flags = CLK_IS_BASIC | flexgen_flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	xbar_reg = reg + 0x18 + (idx & ~0x3);
+	xbar_shift = (idx % 4) * 0x8;
+	fdiv_reg = reg + 0x164 + idx * 4;
+
+	/* Crossbar element config */
+	fgxbar->mux.lock = lock;
+	fgxbar->mux.mask = BIT(6) - 1;
+	fgxbar->mux.reg = xbar_reg;
+	fgxbar->mux.shift = xbar_shift;
+	fgxbar->mux.table = NULL;
+
+
+	/* Pre-divider's gate config (in xbar register)*/
+	fgxbar->pgate.lock = lock;
+	fgxbar->pgate.reg = xbar_reg;
+	fgxbar->pgate.bit_idx = xbar_shift + 6;
+
+	/* Pre-divider config */
+	fgxbar->pdiv.lock = lock;
+	fgxbar->pdiv.reg = reg + 0x58 + idx * 4;
+	fgxbar->pdiv.width = 10;
+
+	/* Final divider's gate config */
+	fgxbar->fgate.lock = lock;
+	fgxbar->fgate.reg = fdiv_reg;
+	fgxbar->fgate.bit_idx = 6;
+
+	/* Final divider config */
+	fgxbar->fdiv.lock = lock;
+	fgxbar->fdiv.reg = fdiv_reg;
+	fgxbar->fdiv.width = 6;
+
+	fgxbar->hw.init = &init;
+
+	clk = clk_register(NULL, &fgxbar->hw);
+	if (IS_ERR(clk))
+		kfree(fgxbar);
+	else
+		pr_debug("%s: parent %s rate %u\n",
+			__clk_get_name(clk),
+			__clk_get_name(clk_get_parent(clk)),
+			(unsigned int)clk_get_rate(clk));
+	return clk;
+}
+
+static const char ** __init flexgen_get_parents(struct device_node *np,
+						       int *num_parents)
+{
+	const char **parents;
+	int nparents, i;
+
+	nparents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+	if (WARN_ON(nparents <= 0))
+		return NULL;
+
+	parents = kzalloc(nparents * sizeof(const char *), GFP_KERNEL);
+	if (!parents)
+		return NULL;
+
+	for (i = 0; i < nparents; i++)
+		parents[i] = of_clk_get_parent_name(np, i);
+
+	*num_parents = nparents;
+	return parents;
+}
+
+void __init st_of_flexgen_setup(struct device_node *np)
+{
+	struct device_node *pnode;
+	void __iomem *reg;
+	struct clk_onecell_data *clk_data;
+	const char **parents;
+	int num_parents, i;
+	spinlock_t *rlock = NULL;
+	unsigned long flex_flags = 0;
+
+	pnode = of_get_parent(np);
+	if (!pnode)
+		return;
+
+	reg = of_iomap(pnode, 0);
+	if (!reg)
+		return;
+
+	parents = flexgen_get_parents(np, &num_parents);
+	if (!parents)
+		return;
+
+	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		goto err;
+
+	clk_data->clk_num = of_property_count_strings(np ,
+			"clock-output-names");
+	if (clk_data->clk_num <= 0) {
+		pr_err("%s: Failed to get number of output clocks (%d)",
+				__func__, clk_data->clk_num);
+		goto err;
+	}
+
+	clk_data->clks = kzalloc(clk_data->clk_num * sizeof(struct clk *),
+			GFP_KERNEL);
+	if (!clk_data->clks)
+		goto err;
+
+	rlock = kzalloc(sizeof(spinlock_t), GFP_KERNEL);
+	if (!rlock)
+		goto err;
+
+	for (i = 0; i < clk_data->clk_num; i++) {
+		struct clk *clk;
+		const char *clk_name;
+
+		if (of_property_read_string_index(np, "clock-output-names",
+						  i, &clk_name)) {
+			break;
+		}
+
+		/*
+		 * If we read an empty clock name then the output is unused
+		 */
+		if (*clk_name == '\0')
+			continue;
+
+		clk = clk_register_flexgen(clk_name, parents, num_parents,
+					   reg, rlock, i, flex_flags);
+
+		if (IS_ERR(clk))
+			goto err;
+
+		clk_data->clks[i] = clk;
+	}
+
+	kfree(parents);
+	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err:
+	if (clk_data)
+		kfree(clk_data->clks);
+	kfree(clk_data);
+	kfree(parents);
+	kfree(rlock);
+
+	return;
+}
+CLK_OF_DECLARE(flexgen, "st,flexgen", st_of_flexgen_setup);
-- 
1.9.1

[PATCH RESEND 03/12] drivers: clk: st: STiH407: Support for Flexgen Clocks

[Gabriel FERNANDEZ]

This patch is the Flexgen implementation reusing as much as possible
of Common Clock Framework functions.

The idea is to have an instance of "struct flexgen" per output clock.
It represents the clock cross bar (by a mux element), and the pre and final dividers
(using dividers and gates elements).

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/Makefile      |   2 +-
 drivers/clk/st/clk-flexgen.c | 332 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 333 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/st/clk-flexgen.c

diff --git a/drivers/clk/st/Makefile b/drivers/clk/st/Makefile
index c7455ff..ede7b2f 100644
--- a/drivers/clk/st/Makefile
+++ b/drivers/clk/st/Makefile
@@ -1 +1 @@
-obj-y += clkgen-mux.o clkgen-pll.o clkgen-fsyn.o
+obj-y += clkgen-mux.o clkgen-pll.o clkgen-fsyn.o clk-flexgen.o
diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
new file mode 100644
index 0000000..f3ed700
--- /dev/null
+++ b/drivers/clk/st/clk-flexgen.c
@@ -0,0 +1,332 @@
+/*
+ * clk-flexgen.c
+ *
+ * Copyright (C) ST-Microelectronics SA 2013
+ * Author:  Maxime Coquelin <maxime.coquelin@st.com> for ST-Microelectronics.
+ * License terms:  GNU General Public License (GPL), version 2  */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct flexgen {
+	struct clk_hw hw;
+
+	/* Crossbar */
+	struct clk_mux mux;
+	/* Pre-divisor's gate */
+	struct clk_gate pgate;
+	/* Pre-divisor */
+	struct clk_divider pdiv;
+	/* Final divisor's gate */
+	struct clk_gate fgate;
+	/* Final divisor */
+	struct clk_divider fdiv;
+};
+
+#define to_flexgen(_hw) container_of(_hw, struct flexgen, hw)
+
+static int flexgen_enable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pgate_hw = &flexgen->pgate.hw;
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	pgate_hw->clk = hw->clk;
+	fgate_hw->clk = hw->clk;
+
+	clk_gate_ops.enable(pgate_hw);
+
+	clk_gate_ops.enable(fgate_hw);
+
+	pr_debug("%s: flexgen output enabled\n", __clk_get_name(hw->clk));
+	return 0;
+}
+
+static void flexgen_disable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	/* disable only the final gate */
+	fgate_hw->clk = hw->clk;
+
+	clk_gate_ops.disable(fgate_hw);
+
+	pr_debug("%s: flexgen output disabled\n", __clk_get_name(hw->clk));
+}
+
+static int flexgen_is_enabled(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	fgate_hw->clk = hw->clk;
+
+	if (!clk_gate_ops.is_enabled(fgate_hw))
+		return 0;
+
+	return 1;
+}
+
+static u8 flexgen_get_parent(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	mux_hw->clk = hw->clk;
+
+	return clk_mux_ops.get_parent(mux_hw);
+}
+
+static int flexgen_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	mux_hw->clk = hw->clk;
+
+	return clk_mux_ops.set_parent(mux_hw, index);
+}
+
+static inline unsigned long
+clk_best_div(unsigned long parent_rate, unsigned long rate)
+{
+	return parent_rate / rate + ((rate > (2*(parent_rate % rate))) ? 0 : 1);
+}
+
+static long flexgen_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	unsigned long div;
+
+	/* Round div according to exact prate and wished rate */
+	div = clk_best_div(*prate, rate);
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		*prate = rate * div;
+		return rate;
+	} else
+		return *prate / div;
+}
+
+unsigned long flexgen_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	unsigned long mid_rate;
+
+	pdiv_hw->clk = hw->clk;
+	fdiv_hw->clk = hw->clk;
+
+	mid_rate = clk_divider_ops.recalc_rate(pdiv_hw, parent_rate);
+
+	return clk_divider_ops.recalc_rate(fdiv_hw, mid_rate);
+}
+
+static int flexgen_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	unsigned long primary_div = 0;
+	int ret = 0;
+
+	pdiv_hw->clk = hw->clk;
+	fdiv_hw->clk = hw->clk;
+
+	primary_div = clk_best_div(parent_rate, rate);
+
+	clk_divider_ops.set_rate(fdiv_hw, parent_rate, parent_rate);
+	ret = clk_divider_ops.set_rate(pdiv_hw, rate, rate * primary_div);
+
+	return ret;
+}
+
+static const struct clk_ops flexgen_ops = {
+	.enable = flexgen_enable,
+	.disable = flexgen_disable,
+	.is_enabled = flexgen_is_enabled,
+	.get_parent = flexgen_get_parent,
+	.set_parent = flexgen_set_parent,
+	.round_rate = flexgen_round_rate,
+	.recalc_rate = flexgen_recalc_rate,
+	.set_rate = flexgen_set_rate,
+};
+
+struct clk *clk_register_flexgen(const char *name,
+				const char **parent_names, u8 num_parents,
+				void __iomem *reg, spinlock_t *lock, u32 idx,
+				unsigned long flexgen_flags) {
+	struct flexgen *fgxbar;
+	struct clk *clk;
+	struct clk_init_data init;
+	u32  xbar_shift;
+	void __iomem *xbar_reg, *fdiv_reg;
+
+	fgxbar = kzalloc(sizeof(struct flexgen), GFP_KERNEL);
+	if (!fgxbar)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &flexgen_ops;
+	init.flags = CLK_IS_BASIC | flexgen_flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	xbar_reg = reg + 0x18 + (idx & ~0x3);
+	xbar_shift = (idx % 4) * 0x8;
+	fdiv_reg = reg + 0x164 + idx * 4;
+
+	/* Crossbar element config */
+	fgxbar->mux.lock = lock;
+	fgxbar->mux.mask = BIT(6) - 1;
+	fgxbar->mux.reg = xbar_reg;
+	fgxbar->mux.shift = xbar_shift;
+	fgxbar->mux.table = NULL;
+
+
+	/* Pre-divider's gate config (in xbar register)*/
+	fgxbar->pgate.lock = lock;
+	fgxbar->pgate.reg = xbar_reg;
+	fgxbar->pgate.bit_idx = xbar_shift + 6;
+
+	/* Pre-divider config */
+	fgxbar->pdiv.lock = lock;
+	fgxbar->pdiv.reg = reg + 0x58 + idx * 4;
+	fgxbar->pdiv.width = 10;
+
+	/* Final divider's gate config */
+	fgxbar->fgate.lock = lock;
+	fgxbar->fgate.reg = fdiv_reg;
+	fgxbar->fgate.bit_idx = 6;
+
+	/* Final divider config */
+	fgxbar->fdiv.lock = lock;
+	fgxbar->fdiv.reg = fdiv_reg;
+	fgxbar->fdiv.width = 6;
+
+	fgxbar->hw.init = &init;
+
+	clk = clk_register(NULL, &fgxbar->hw);
+	if (IS_ERR(clk))
+		kfree(fgxbar);
+	else
+		pr_debug("%s: parent %s rate %u\n",
+			__clk_get_name(clk),
+			__clk_get_name(clk_get_parent(clk)),
+			(unsigned int)clk_get_rate(clk));
+	return clk;
+}
+
+static const char ** __init flexgen_get_parents(struct device_node *np,
+						       int *num_parents)
+{
+	const char **parents;
+	int nparents, i;
+
+	nparents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+	if (WARN_ON(nparents <= 0))
+		return NULL;
+
+	parents = kzalloc(nparents * sizeof(const char *), GFP_KERNEL);
+	if (!parents)
+		return NULL;
+
+	for (i = 0; i < nparents; i++)
+		parents[i] = of_clk_get_parent_name(np, i);
+
+	*num_parents = nparents;
+	return parents;
+}
+
+void __init st_of_flexgen_setup(struct device_node *np)
+{
+	struct device_node *pnode;
+	void __iomem *reg;
+	struct clk_onecell_data *clk_data;
+	const char **parents;
+	int num_parents, i;
+	spinlock_t *rlock = NULL;
+	unsigned long flex_flags = 0;
+
+	pnode = of_get_parent(np);
+	if (!pnode)
+		return;
+
+	reg = of_iomap(pnode, 0);
+	if (!reg)
+		return;
+
+	parents = flexgen_get_parents(np, &num_parents);
+	if (!parents)
+		return;
+
+	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		goto err;
+
+	clk_data->clk_num = of_property_count_strings(np ,
+			"clock-output-names");
+	if (clk_data->clk_num <= 0) {
+		pr_err("%s: Failed to get number of output clocks (%d)",
+				__func__, clk_data->clk_num);
+		goto err;
+	}
+
+	clk_data->clks = kzalloc(clk_data->clk_num * sizeof(struct clk *),
+			GFP_KERNEL);
+	if (!clk_data->clks)
+		goto err;
+
+	rlock = kzalloc(sizeof(spinlock_t), GFP_KERNEL);
+	if (!rlock)
+		goto err;
+
+	for (i = 0; i < clk_data->clk_num; i++) {
+		struct clk *clk;
+		const char *clk_name;
+
+		if (of_property_read_string_index(np, "clock-output-names",
+						  i, &clk_name)) {
+			break;
+		}
+
+		/*
+		 * If we read an empty clock name then the output is unused
+		 */
+		if (*clk_name == '\0')
+			continue;
+
+		clk = clk_register_flexgen(clk_name, parents, num_parents,
+					   reg, rlock, i, flex_flags);
+
+		if (IS_ERR(clk))
+			goto err;
+
+		clk_data->clks[i] = clk;
+	}
+
+	kfree(parents);
+	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err:
+	if (clk_data)
+		kfree(clk_data->clks);
+	kfree(clk_data);
+	kfree(parents);
+	kfree(rlock);
+
+	return;
+}
+CLK_OF_DECLARE(flexgen, "st,flexgen", st_of_flexgen_setup);
-- 
1.9.1

[PATCH RESEND 03/12] drivers: clk: st: STiH407: Support for Flexgen Clocks

[Gabriel FERNANDEZ]

This patch is the Flexgen implementation reusing as much as possible
of Common Clock Framework functions.

The idea is to have an instance of "struct flexgen" per output clock.
It represents the clock cross bar (by a mux element), and the pre and final dividers
(using dividers and gates elements).

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/Makefile      |   2 +-
 drivers/clk/st/clk-flexgen.c | 332 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 333 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/st/clk-flexgen.c

diff --git a/drivers/clk/st/Makefile b/drivers/clk/st/Makefile
index c7455ff..ede7b2f 100644
--- a/drivers/clk/st/Makefile
+++ b/drivers/clk/st/Makefile
@@ -1 +1 @@
-obj-y += clkgen-mux.o clkgen-pll.o clkgen-fsyn.o
+obj-y += clkgen-mux.o clkgen-pll.o clkgen-fsyn.o clk-flexgen.o
diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c
new file mode 100644
index 0000000..f3ed700
--- /dev/null
+++ b/drivers/clk/st/clk-flexgen.c
@@ -0,0 +1,332 @@
+/*
+ * clk-flexgen.c
+ *
+ * Copyright (C) ST-Microelectronics SA 2013
+ * Author:  Maxime Coquelin <maxime.coquelin@st.com> for ST-Microelectronics.
+ * License terms:  GNU General Public License (GPL), version 2  */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct flexgen {
+	struct clk_hw hw;
+
+	/* Crossbar */
+	struct clk_mux mux;
+	/* Pre-divisor's gate */
+	struct clk_gate pgate;
+	/* Pre-divisor */
+	struct clk_divider pdiv;
+	/* Final divisor's gate */
+	struct clk_gate fgate;
+	/* Final divisor */
+	struct clk_divider fdiv;
+};
+
+#define to_flexgen(_hw) container_of(_hw, struct flexgen, hw)
+
+static int flexgen_enable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pgate_hw = &flexgen->pgate.hw;
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	pgate_hw->clk = hw->clk;
+	fgate_hw->clk = hw->clk;
+
+	clk_gate_ops.enable(pgate_hw);
+
+	clk_gate_ops.enable(fgate_hw);
+
+	pr_debug("%s: flexgen output enabled\n", __clk_get_name(hw->clk));
+	return 0;
+}
+
+static void flexgen_disable(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	/* disable only the final gate */
+	fgate_hw->clk = hw->clk;
+
+	clk_gate_ops.disable(fgate_hw);
+
+	pr_debug("%s: flexgen output disabled\n", __clk_get_name(hw->clk));
+}
+
+static int flexgen_is_enabled(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *fgate_hw = &flexgen->fgate.hw;
+
+	fgate_hw->clk = hw->clk;
+
+	if (!clk_gate_ops.is_enabled(fgate_hw))
+		return 0;
+
+	return 1;
+}
+
+static u8 flexgen_get_parent(struct clk_hw *hw)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	mux_hw->clk = hw->clk;
+
+	return clk_mux_ops.get_parent(mux_hw);
+}
+
+static int flexgen_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *mux_hw = &flexgen->mux.hw;
+
+	mux_hw->clk = hw->clk;
+
+	return clk_mux_ops.set_parent(mux_hw, index);
+}
+
+static inline unsigned long
+clk_best_div(unsigned long parent_rate, unsigned long rate)
+{
+	return parent_rate / rate + ((rate > (2*(parent_rate % rate))) ? 0 : 1);
+}
+
+static long flexgen_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	unsigned long div;
+
+	/* Round div according to exact prate and wished rate */
+	div = clk_best_div(*prate, rate);
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		*prate = rate * div;
+		return rate;
+	} else
+		return *prate / div;
+}
+
+unsigned long flexgen_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	unsigned long mid_rate;
+
+	pdiv_hw->clk = hw->clk;
+	fdiv_hw->clk = hw->clk;
+
+	mid_rate = clk_divider_ops.recalc_rate(pdiv_hw, parent_rate);
+
+	return clk_divider_ops.recalc_rate(fdiv_hw, mid_rate);
+}
+
+static int flexgen_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct flexgen *flexgen = to_flexgen(hw);
+	struct clk_hw *pdiv_hw = &flexgen->pdiv.hw;
+	struct clk_hw *fdiv_hw = &flexgen->fdiv.hw;
+	unsigned long primary_div = 0;
+	int ret = 0;
+
+	pdiv_hw->clk = hw->clk;
+	fdiv_hw->clk = hw->clk;
+
+	primary_div = clk_best_div(parent_rate, rate);
+
+	clk_divider_ops.set_rate(fdiv_hw, parent_rate, parent_rate);
+	ret = clk_divider_ops.set_rate(pdiv_hw, rate, rate * primary_div);
+
+	return ret;
+}
+
+static const struct clk_ops flexgen_ops = {
+	.enable = flexgen_enable,
+	.disable = flexgen_disable,
+	.is_enabled = flexgen_is_enabled,
+	.get_parent = flexgen_get_parent,
+	.set_parent = flexgen_set_parent,
+	.round_rate = flexgen_round_rate,
+	.recalc_rate = flexgen_recalc_rate,
+	.set_rate = flexgen_set_rate,
+};
+
+struct clk *clk_register_flexgen(const char *name,
+				const char **parent_names, u8 num_parents,
+				void __iomem *reg, spinlock_t *lock, u32 idx,
+				unsigned long flexgen_flags) {
+	struct flexgen *fgxbar;
+	struct clk *clk;
+	struct clk_init_data init;
+	u32  xbar_shift;
+	void __iomem *xbar_reg, *fdiv_reg;
+
+	fgxbar = kzalloc(sizeof(struct flexgen), GFP_KERNEL);
+	if (!fgxbar)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &flexgen_ops;
+	init.flags = CLK_IS_BASIC | flexgen_flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	xbar_reg = reg + 0x18 + (idx & ~0x3);
+	xbar_shift = (idx % 4) * 0x8;
+	fdiv_reg = reg + 0x164 + idx * 4;
+
+	/* Crossbar element config */
+	fgxbar->mux.lock = lock;
+	fgxbar->mux.mask = BIT(6) - 1;
+	fgxbar->mux.reg = xbar_reg;
+	fgxbar->mux.shift = xbar_shift;
+	fgxbar->mux.table = NULL;
+
+
+	/* Pre-divider's gate config (in xbar register)*/
+	fgxbar->pgate.lock = lock;
+	fgxbar->pgate.reg = xbar_reg;
+	fgxbar->pgate.bit_idx = xbar_shift + 6;
+
+	/* Pre-divider config */
+	fgxbar->pdiv.lock = lock;
+	fgxbar->pdiv.reg = reg + 0x58 + idx * 4;
+	fgxbar->pdiv.width = 10;
+
+	/* Final divider's gate config */
+	fgxbar->fgate.lock = lock;
+	fgxbar->fgate.reg = fdiv_reg;
+	fgxbar->fgate.bit_idx = 6;
+
+	/* Final divider config */
+	fgxbar->fdiv.lock = lock;
+	fgxbar->fdiv.reg = fdiv_reg;
+	fgxbar->fdiv.width = 6;
+
+	fgxbar->hw.init = &init;
+
+	clk = clk_register(NULL, &fgxbar->hw);
+	if (IS_ERR(clk))
+		kfree(fgxbar);
+	else
+		pr_debug("%s: parent %s rate %u\n",
+			__clk_get_name(clk),
+			__clk_get_name(clk_get_parent(clk)),
+			(unsigned int)clk_get_rate(clk));
+	return clk;
+}
+
+static const char ** __init flexgen_get_parents(struct device_node *np,
+						       int *num_parents)
+{
+	const char **parents;
+	int nparents, i;
+
+	nparents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+	if (WARN_ON(nparents <= 0))
+		return NULL;
+
+	parents = kzalloc(nparents * sizeof(const char *), GFP_KERNEL);
+	if (!parents)
+		return NULL;
+
+	for (i = 0; i < nparents; i++)
+		parents[i] = of_clk_get_parent_name(np, i);
+
+	*num_parents = nparents;
+	return parents;
+}
+
+void __init st_of_flexgen_setup(struct device_node *np)
+{
+	struct device_node *pnode;
+	void __iomem *reg;
+	struct clk_onecell_data *clk_data;
+	const char **parents;
+	int num_parents, i;
+	spinlock_t *rlock = NULL;
+	unsigned long flex_flags = 0;
+
+	pnode = of_get_parent(np);
+	if (!pnode)
+		return;
+
+	reg = of_iomap(pnode, 0);
+	if (!reg)
+		return;
+
+	parents = flexgen_get_parents(np, &num_parents);
+	if (!parents)
+		return;
+
+	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		goto err;
+
+	clk_data->clk_num = of_property_count_strings(np ,
+			"clock-output-names");
+	if (clk_data->clk_num <= 0) {
+		pr_err("%s: Failed to get number of output clocks (%d)",
+				__func__, clk_data->clk_num);
+		goto err;
+	}
+
+	clk_data->clks = kzalloc(clk_data->clk_num * sizeof(struct clk *),
+			GFP_KERNEL);
+	if (!clk_data->clks)
+		goto err;
+
+	rlock = kzalloc(sizeof(spinlock_t), GFP_KERNEL);
+	if (!rlock)
+		goto err;
+
+	for (i = 0; i < clk_data->clk_num; i++) {
+		struct clk *clk;
+		const char *clk_name;
+
+		if (of_property_read_string_index(np, "clock-output-names",
+						  i, &clk_name)) {
+			break;
+		}
+
+		/*
+		 * If we read an empty clock name then the output is unused
+		 */
+		if (*clk_name == '\0')
+			continue;
+
+		clk = clk_register_flexgen(clk_name, parents, num_parents,
+					   reg, rlock, i, flex_flags);
+
+		if (IS_ERR(clk))
+			goto err;
+
+		clk_data->clks[i] = clk;
+	}
+
+	kfree(parents);
+	of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err:
+	if (clk_data)
+		kfree(clk_data->clks);
+	kfree(clk_data);
+	kfree(parents);
+	kfree(rlock);
+
+	return;
+}
+CLK_OF_DECLARE(flexgen, "st,flexgen", st_of_flexgen_setup);
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 03/12] drivers: clk: st: STiH407: Support for Flexgen Clocks

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch is the Flexgen implementation reusing as much as possible
> of Common Clock Framework functions.
> 
> The idea is to have an instance of "struct flexgen" per output clock.
> It represents the clock cross bar (by a mux element), and the pre and final dividers
> (using dividers and gates elements).
> 
> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  drivers/clk/st/Makefile      |   2 +-
>  drivers/clk/st/clk-flexgen.c | 332 +++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 333 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/st/clk-flexgen.c

Acked-by: Peter Griffin <peter.griffin@linaro.org>

[STLinux Kernel] [PATCH RESEND 03/12] drivers: clk: st: STiH407: Support for Flexgen Clocks

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch is the Flexgen implementation reusing as much as possible
> of Common Clock Framework functions.
> 
> The idea is to have an instance of "struct flexgen" per output clock.
> It represents the clock cross bar (by a mux element), and the pre and final dividers
> (using dividers and gates elements).
> 
> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  drivers/clk/st/Makefile      |   2 +-
>  drivers/clk/st/clk-flexgen.c | 332 +++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 333 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/st/clk-flexgen.c

Acked-by: Peter Griffin <peter.griffin@linaro.org>

[PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks

[Gabriel FERNANDEZ]

The patch supports the A9-mux clocks used by ClockGenA9

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-mux.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index a329906..9bdedc8 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -580,6 +580,11 @@ static struct clkgen_mux_data stih416_a9_mux_data = {
 	.shift = 0,
 	.width = 2,
 };
+static struct clkgen_mux_data stih407_a9_mux_data = {
+	.offset = 0x1a4,
+	.shift = 1,
+	.width = 2,
+};
 
 static struct of_device_id mux_of_match[] = {
 	{
@@ -610,6 +615,10 @@ static struct of_device_id mux_of_match[] = {
 		.compatible = "st,stih416-clkgen-a9-mux",
 		.data = &stih416_a9_mux_data,
 	},
+	{
+		.compatible = "st,stih407-clkgen-a9-mux",
+		.data = &stih407_a9_mux_data,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks

[Gabriel FERNANDEZ]

The patch supports the A9-mux clocks used by ClockGenA9

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-mux.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index a329906..9bdedc8 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -580,6 +580,11 @@ static struct clkgen_mux_data stih416_a9_mux_data = {
 	.shift = 0,
 	.width = 2,
 };
+static struct clkgen_mux_data stih407_a9_mux_data = {
+	.offset = 0x1a4,
+	.shift = 1,
+	.width = 2,
+};
 
 static struct of_device_id mux_of_match[] = {
 	{
@@ -610,6 +615,10 @@ static struct of_device_id mux_of_match[] = {
 		.compatible = "st,stih416-clkgen-a9-mux",
 		.data = &stih416_a9_mux_data,
 	},
+	{
+		.compatible = "st,stih407-clkgen-a9-mux",
+		.data = &stih407_a9_mux_data,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks

[Gabriel FERNANDEZ]

The patch supports the A9-mux clocks used by ClockGenA9

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-mux.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index a329906..9bdedc8 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -580,6 +580,11 @@ static struct clkgen_mux_data stih416_a9_mux_data = {
 	.shift = 0,
 	.width = 2,
 };
+static struct clkgen_mux_data stih407_a9_mux_data = {
+	.offset = 0x1a4,
+	.shift = 1,
+	.width = 2,
+};
 
 static struct of_device_id mux_of_match[] = {
 	{
@@ -610,6 +615,10 @@ static struct of_device_id mux_of_match[] = {
 		.compatible = "st,stih416-clkgen-a9-mux",
 		.data = &stih416_a9_mux_data,
 	},
+	{
+		.compatible = "st,stih407-clkgen-a9-mux",
+		.data = &stih407_a9_mux_data,
+	},
 	{}
 };
 
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch supports the A9-mux clocks used by ClockGenA9
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-mux.c | 9 +++++++++
>  1 file changed, 9 insertions(+)

Acked-by: Peter Griffin <peter.griffin@st.com>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch supports the A9-mux clocks used by ClockGenA9
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-mux.c | 9 +++++++++
>  1 file changed, 9 insertions(+)

Acked-by: Peter Griffin <peter.griffin@st.com>

Regards,

Peter

Re: [STLinux Kernel] [PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks

[Peter Griffin]

On Thu, 05 Jun 2014, Peter Griffin wrote:

> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
> 
> > The patch supports the A9-mux clocks used by ClockGenA9
> > 
> > Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> > Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> > ---
> >  drivers/clk/st/clkgen-mux.c | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> 
> Acked-by: Peter Griffin <peter.griffin@st.com>

Sorry old habits die hard, that should have been

Acked-by: Peter Griffin <peter.griffin@linaro.org>

regards,

Peter.

[STLinux Kernel] [PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks

[Peter Griffin]

On Thu, 05 Jun 2014, Peter Griffin wrote:

> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
> 
> > The patch supports the A9-mux clocks used by ClockGenA9
> > 
> > Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> > Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> > ---
> >  drivers/clk/st/clkgen-mux.c | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> 
> Acked-by: Peter Griffin <peter.griffin@st.com>

Sorry old habits die hard, that should have been

Acked-by: Peter Griffin <peter.griffin@linaro.org>

regards,

Peter.

[PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenA0
It includes c32 type PLL.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index d8b9b1a..6916cfa 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
 	.ops		= &st_pll1200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_a0 = {
+	/* 407 A0 */
+	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2b4,	0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -572,6 +584,10 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih416-plls-c32-ddr",
 		.data = &st_pll3200c32_ddr_416,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-a0",
+		.data = &st_pll3200c32_407_a0,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenA0
It includes c32 type PLL.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index d8b9b1a..6916cfa 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
 	.ops		= &st_pll1200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_a0 = {
+	/* 407 A0 */
+	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2b4,	0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -572,6 +584,10 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih416-plls-c32-ddr",
 		.data = &st_pll3200c32_ddr_416,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-a0",
+		.data = &st_pll3200c32_407_a0,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenA0
It includes c32 type PLL.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index d8b9b1a..6916cfa 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
 	.ops		= &st_pll1200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_a0 = {
+	/* 407 A0 */
+	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2b4,	0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -572,6 +584,10 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih416-plls-c32-ddr",
 		.data = &st_pll3200c32_ddr_416,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-a0",
+		.data = &st_pll3200c32_407_a0,
+	},
 	{}
 };
 
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Peter Griffin]

Hi Gabi,

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for DT registration of ClockGenA0
> It includes c32 type PLL.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
> index d8b9b1a..6916cfa 100644
> --- a/drivers/clk/st/clkgen-pll.c
> +++ b/drivers/clk/st/clkgen-pll.c
> @@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
>  	.ops		= &st_pll1200c32_ops,
>  };
>  
> +static struct clkgen_pll_data st_pll3200c32_407_a0 = {
> +	/* 407 A0 */
> +	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
> +	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
> +	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
> +	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
> +	.num_odfs = 1,
> +	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
> +	.odf_gate	= { CLKGEN_FIELD(0x2b4,	0x1,			6) },
> +	.ops		= &stm_pll3200c32_ops,
> +};
> +
>  /**
I think these could be 'static const' as well, with some fixups in the function protoypes 
which use it.

Apart from that : -
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Peter Griffin]

Hi Gabi,

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for DT registration of ClockGenA0
> It includes c32 type PLL.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
> index d8b9b1a..6916cfa 100644
> --- a/drivers/clk/st/clkgen-pll.c
> +++ b/drivers/clk/st/clkgen-pll.c
> @@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
>  	.ops		= &st_pll1200c32_ops,
>  };
>  
> +static struct clkgen_pll_data st_pll3200c32_407_a0 = {
> +	/* 407 A0 */
> +	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
> +	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
> +	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
> +	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
> +	.num_odfs = 1,
> +	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
> +	.odf_gate	= { CLKGEN_FIELD(0x2b4,	0x1,			6) },
> +	.ops		= &stm_pll3200c32_ops,
> +};
> +
>  /**
I think these could be 'static const' as well, with some fixups in the function protoypes 
which use it.

Apart from that : -
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

Re: [STLinux Kernel] [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Gabriel Fernandez]

On 5 June 2014 13:57, Peter Griffin <peter.griffin@linaro.org> wrote:
> Hi Gabi,
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> The patch added support for DT registration of ClockGenA0
>> It includes c32 type PLL.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
>> ---
>>  drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
>> index d8b9b1a..6916cfa 100644
>> --- a/drivers/clk/st/clkgen-pll.c
>> +++ b/drivers/clk/st/clkgen-pll.c
>> @@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
>>       .ops            = &st_pll1200c32_ops,
>>  };
>>
>> +static struct clkgen_pll_data st_pll3200c32_407_a0 = {
>> +     /* 407 A0 */
>> +     .pdn_status     = CLKGEN_FIELD(0x2a0,   0x1,                    8),
>> +     .locked_status  = CLKGEN_FIELD(0x2a0,   0x1,                    24),
>> +     .ndiv           = CLKGEN_FIELD(0x2a4,   C32_NDIV_MASK,          16),
>> +     .idf            = CLKGEN_FIELD(0x2a4,   C32_IDF_MASK,           0x0),
>> +     .num_odfs = 1,
>> +     .odf            = { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,           0) },
>> +     .odf_gate       = { CLKGEN_FIELD(0x2b4, 0x1,                    6) },
>> +     .ops            = &stm_pll3200c32_ops,
>> +};
>> +
>>  /**
> I think these could be 'static const' as well, with some fixups in the function protoypes
> which use it.
>
Done
Thanks Peter

> Apart from that : -
>  Acked-by: Peter Griffin <peter.griffin@linaro.org>
>
> Regards,
>
> Peter

[STLinux Kernel] [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Gabriel Fernandez]

On 5 June 2014 13:57, Peter Griffin <peter.griffin@linaro.org> wrote:
> Hi Gabi,
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> The patch added support for DT registration of ClockGenA0
>> It includes c32 type PLL.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
>> ---
>>  drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
>> index d8b9b1a..6916cfa 100644
>> --- a/drivers/clk/st/clkgen-pll.c
>> +++ b/drivers/clk/st/clkgen-pll.c
>> @@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
>>       .ops            = &st_pll1200c32_ops,
>>  };
>>
>> +static struct clkgen_pll_data st_pll3200c32_407_a0 = {
>> +     /* 407 A0 */
>> +     .pdn_status     = CLKGEN_FIELD(0x2a0,   0x1,                    8),
>> +     .locked_status  = CLKGEN_FIELD(0x2a0,   0x1,                    24),
>> +     .ndiv           = CLKGEN_FIELD(0x2a4,   C32_NDIV_MASK,          16),
>> +     .idf            = CLKGEN_FIELD(0x2a4,   C32_IDF_MASK,           0x0),
>> +     .num_odfs = 1,
>> +     .odf            = { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,           0) },
>> +     .odf_gate       = { CLKGEN_FIELD(0x2b4, 0x1,                    6) },
>> +     .ops            = &stm_pll3200c32_ops,
>> +};
>> +
>>  /**
> I think these could be 'static const' as well, with some fixups in the function protoypes
> which use it.
>
Done
Thanks Peter

> Apart from that : -
>  Acked-by: Peter Griffin <peter.griffin@linaro.org>
>
> Regards,
>
> Peter

Re: [STLinux Kernel] [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0

[Gabriel Fernandez]

On 5 June 2014 13:57, Peter Griffin <peter.griffin@linaro.org> wrote:
> Hi Gabi,
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> The patch added support for DT registration of ClockGenA0
>> It includes c32 type PLL.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
>> ---
>>  drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
>> index d8b9b1a..6916cfa 100644
>> --- a/drivers/clk/st/clkgen-pll.c
>> +++ b/drivers/clk/st/clkgen-pll.c
>> @@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
>>       .ops            = &st_pll1200c32_ops,
>>  };
>>
>> +static struct clkgen_pll_data st_pll3200c32_407_a0 = {
>> +     /* 407 A0 */
>> +     .pdn_status     = CLKGEN_FIELD(0x2a0,   0x1,                    8),
>> +     .locked_status  = CLKGEN_FIELD(0x2a0,   0x1,                    24),
>> +     .ndiv           = CLKGEN_FIELD(0x2a4,   C32_NDIV_MASK,          16),
>> +     .idf            = CLKGEN_FIELD(0x2a4,   C32_IDF_MASK,           0x0),
>> +     .num_odfs = 1,
>> +     .odf            = { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,           0) },
>> +     .odf_gate       = { CLKGEN_FIELD(0x2b4, 0x1,                    6) },
>> +     .ops            = &stm_pll3200c32_ops,
>> +};
>> +
>>  /**
> I think these could be 'static const' as well, with some fixups in the function protoypes
> which use it.
>
Done
Thanks Peter

> Apart from that : -
>  Acked-by: Peter Griffin <peter.griffin@linaro.org>
>
> Regards,
>
> Peter

[PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Gabriel FERNANDEZ]

This patch introduces polarity indication for pll power up bit
and for standby bit in order to have same code between Orly 2
and CAN.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-fsyn.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 4f53ee0..5aae17c 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -67,6 +67,8 @@ struct clkgen_quadfs_data {
 	bool reset_present;
 	bool bwfilter_present;
 	bool lockstatus_present;
+	bool powerup_polarity;
+	bool standby_polarity;
 	bool nsdiv_present;
 	struct clkgen_field ndiv;
 	struct clkgen_field ref_bw;
@@ -308,7 +310,7 @@ static int quadfs_pll_enable(struct clk_hw *hw)
 	/*
 	 * Power up the PLL
 	 */
-	CLKGEN_WRITE(pll, npda, 1);
+	CLKGEN_WRITE(pll, npda, !pll->data->powerup_polarity);
 
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);
@@ -335,7 +337,7 @@ static void quadfs_pll_disable(struct clk_hw *hw)
 	 * Powerdown the PLL and then put block into soft reset if we have
 	 * reset control.
 	 */
-	CLKGEN_WRITE(pll, npda, 0);
+	CLKGEN_WRITE(pll, npda, pll->data->powerup_polarity);
 
 	if (pll->data->reset_present)
 		CLKGEN_WRITE(pll, nreset, 0);
@@ -611,7 +613,7 @@ static int quadfs_fsynth_enable(struct clk_hw *hw)
 	if (fs->lock)
 		spin_lock_irqsave(fs->lock, flags);
 
-	CLKGEN_WRITE(fs, nsb[fs->chan], 1);
+	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
@@ -631,7 +633,7 @@ static void quadfs_fsynth_disable(struct clk_hw *hw)
 	if (fs->lock)
 		spin_lock_irqsave(fs->lock, flags);
 
-	CLKGEN_WRITE(fs, nsb[fs->chan], 0);
+	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
@@ -645,7 +647,7 @@ static int quadfs_fsynth_is_enabled(struct clk_hw *hw)
 	pr_debug("%s: %s enable bit = 0x%x\n",
 		 __func__, __clk_get_name(hw->clk), nsb);
 
-	return !!nsb;
+	return fs->data->standby_polarity ? !nsb : !!nsb;
 }
 
 #define P15			(uint64_t)(1 << 15)
-- 
1.9.1

[PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Gabriel FERNANDEZ]

This patch introduces polarity indication for pll power up bit
and for standby bit in order to have same code between Orly 2
and CAN.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-fsyn.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 4f53ee0..5aae17c 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -67,6 +67,8 @@ struct clkgen_quadfs_data {
 	bool reset_present;
 	bool bwfilter_present;
 	bool lockstatus_present;
+	bool powerup_polarity;
+	bool standby_polarity;
 	bool nsdiv_present;
 	struct clkgen_field ndiv;
 	struct clkgen_field ref_bw;
@@ -308,7 +310,7 @@ static int quadfs_pll_enable(struct clk_hw *hw)
 	/*
 	 * Power up the PLL
 	 */
-	CLKGEN_WRITE(pll, npda, 1);
+	CLKGEN_WRITE(pll, npda, !pll->data->powerup_polarity);
 
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);
@@ -335,7 +337,7 @@ static void quadfs_pll_disable(struct clk_hw *hw)
 	 * Powerdown the PLL and then put block into soft reset if we have
 	 * reset control.
 	 */
-	CLKGEN_WRITE(pll, npda, 0);
+	CLKGEN_WRITE(pll, npda, pll->data->powerup_polarity);
 
 	if (pll->data->reset_present)
 		CLKGEN_WRITE(pll, nreset, 0);
@@ -611,7 +613,7 @@ static int quadfs_fsynth_enable(struct clk_hw *hw)
 	if (fs->lock)
 		spin_lock_irqsave(fs->lock, flags);
 
-	CLKGEN_WRITE(fs, nsb[fs->chan], 1);
+	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
@@ -631,7 +633,7 @@ static void quadfs_fsynth_disable(struct clk_hw *hw)
 	if (fs->lock)
 		spin_lock_irqsave(fs->lock, flags);
 
-	CLKGEN_WRITE(fs, nsb[fs->chan], 0);
+	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
@@ -645,7 +647,7 @@ static int quadfs_fsynth_is_enabled(struct clk_hw *hw)
 	pr_debug("%s: %s enable bit = 0x%x\n",
 		 __func__, __clk_get_name(hw->clk), nsb);
 
-	return !!nsb;
+	return fs->data->standby_polarity ? !nsb : !!nsb;
 }
 
 #define P15			(uint64_t)(1 << 15)
-- 
1.9.1

[PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Gabriel FERNANDEZ]

This patch introduces polarity indication for pll power up bit
and for standby bit in order to have same code between Orly 2
and CAN.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-fsyn.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 4f53ee0..5aae17c 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -67,6 +67,8 @@ struct clkgen_quadfs_data {
 	bool reset_present;
 	bool bwfilter_present;
 	bool lockstatus_present;
+	bool powerup_polarity;
+	bool standby_polarity;
 	bool nsdiv_present;
 	struct clkgen_field ndiv;
 	struct clkgen_field ref_bw;
@@ -308,7 +310,7 @@ static int quadfs_pll_enable(struct clk_hw *hw)
 	/*
 	 * Power up the PLL
 	 */
-	CLKGEN_WRITE(pll, npda, 1);
+	CLKGEN_WRITE(pll, npda, !pll->data->powerup_polarity);
 
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);
@@ -335,7 +337,7 @@ static void quadfs_pll_disable(struct clk_hw *hw)
 	 * Powerdown the PLL and then put block into soft reset if we have
 	 * reset control.
 	 */
-	CLKGEN_WRITE(pll, npda, 0);
+	CLKGEN_WRITE(pll, npda, pll->data->powerup_polarity);
 
 	if (pll->data->reset_present)
 		CLKGEN_WRITE(pll, nreset, 0);
@@ -611,7 +613,7 @@ static int quadfs_fsynth_enable(struct clk_hw *hw)
 	if (fs->lock)
 		spin_lock_irqsave(fs->lock, flags);
 
-	CLKGEN_WRITE(fs, nsb[fs->chan], 1);
+	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
@@ -631,7 +633,7 @@ static void quadfs_fsynth_disable(struct clk_hw *hw)
 	if (fs->lock)
 		spin_lock_irqsave(fs->lock, flags);
 
-	CLKGEN_WRITE(fs, nsb[fs->chan], 0);
+	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
@@ -645,7 +647,7 @@ static int quadfs_fsynth_is_enabled(struct clk_hw *hw)
 	pr_debug("%s: %s enable bit = 0x%x\n",
 		 __func__, __clk_get_name(hw->clk), nsb);
 
-	return !!nsb;
+	return fs->data->standby_polarity ? !nsb : !!nsb;
 }
 
 #define P15			(uint64_t)(1 << 15)
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Peter Griffin]

Hi Gabi,

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch introduces polarity indication for pll power up bit
> and for standby bit in order to have same code between Orly 2
> and CAN.

I think it would be better to refer to the SoC's by there numeric
name stih416 and stih407, as people unfamiliar with ST SoC names
reading the commit message are unlikely to know what Orly2 or CAN 
mean.

Once fixed you can add my:
Acked-by: Peter Griffin <peter.griffin@linaro.org>

regards,

Peter.

[STLinux Kernel] [PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Peter Griffin]

Hi Gabi,

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch introduces polarity indication for pll power up bit
> and for standby bit in order to have same code between Orly 2
> and CAN.

I think it would be better to refer to the SoC's by there numeric
name stih416 and stih407, as people unfamiliar with ST SoC names
reading the commit message are unlikely to know what Orly2 or CAN 
mean.

Once fixed you can add my:
Acked-by: Peter Griffin <peter.griffin@linaro.org>

regards,

Peter.

Re: [STLinux Kernel] [PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Gabriel Fernandez]

On 06/05/2014 09:45 AM, Peter Griffin wrote:
> Hi Gabi,
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> This patch introduces polarity indication for pll power up bit
>> and for standby bit in order to have same code between Orly 2
>> and CAN.
> I think it would be better to refer to the SoC's by there numeric
> name stih416 and stih407, as people unfamiliar with ST SoC names
> reading the commit message are unlikely to know what Orly2 or CAN
> mean.
>
> Once fixed you can add my:
> Acked-by: Peter Griffin <peter.griffin@linaro.org>

Ok thanks Peter

> regards,
>
> Peter.
>

[STLinux Kernel] [PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Gabriel Fernandez]

On 06/05/2014 09:45 AM, Peter Griffin wrote:
> Hi Gabi,
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> This patch introduces polarity indication for pll power up bit
>> and for standby bit in order to have same code between Orly 2
>> and CAN.
> I think it would be better to refer to the SoC's by there numeric
> name stih416 and stih407, as people unfamiliar with ST SoC names
> reading the commit message are unlikely to know what Orly2 or CAN
> mean.
>
> Once fixed you can add my:
> Acked-by: Peter Griffin <peter.griffin@linaro.org>

Ok thanks Peter

> regards,
>
> Peter.
>

Re: [STLinux Kernel] [PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication

[Gabriel Fernandez]

On 06/05/2014 09:45 AM, Peter Griffin wrote:
> Hi Gabi,
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> This patch introduces polarity indication for pll power up bit
>> and for standby bit in order to have same code between Orly 2
>> and CAN.
> I think it would be better to refer to the SoC's by there numeric
> name stih416 and stih407, as people unfamiliar with ST SoC names
> reading the commit message are unlikely to know what Orly2 or CAN
> mean.
>
> Once fixed you can add my:
> Acked-by: Peter Griffin <peter.griffin@linaro.org>

Ok thanks Peter

> regards,
>
> Peter.
>

[PATCH RESEND 07/12] drivers: clk: st: Add quadfs reset handling

[Gabriel FERNANDEZ]

This patch adds the support of quadfs reset handling.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 5aae17c..46b29c4 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -70,12 +70,14 @@ struct clkgen_quadfs_data {
 	bool powerup_polarity;
 	bool standby_polarity;
 	bool nsdiv_present;
+	bool nrst_present;
 	struct clkgen_field ndiv;
 	struct clkgen_field ref_bw;
 	struct clkgen_field nreset;
 	struct clkgen_field npda;
 	struct clkgen_field lock_status;
 
+	struct clkgen_field nrst[QUADFS_MAX_CHAN];
 	struct clkgen_field nsb[QUADFS_MAX_CHAN];
 	struct clkgen_field en[QUADFS_MAX_CHAN];
 	struct clkgen_field mdiv[QUADFS_MAX_CHAN];
@@ -615,6 +617,9 @@ static int quadfs_fsynth_enable(struct clk_hw *hw)
 
 	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
+	if (fs->data->nrst_present)
+		CLKGEN_WRITE(fs, nrst[fs->chan], 0);
+
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
 
-- 
1.9.1

[PATCH RESEND 07/12] drivers: clk: st: Add quadfs reset handling

[Gabriel FERNANDEZ]

This patch adds the support of quadfs reset handling.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 5aae17c..46b29c4 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -70,12 +70,14 @@ struct clkgen_quadfs_data {
 	bool powerup_polarity;
 	bool standby_polarity;
 	bool nsdiv_present;
+	bool nrst_present;
 	struct clkgen_field ndiv;
 	struct clkgen_field ref_bw;
 	struct clkgen_field nreset;
 	struct clkgen_field npda;
 	struct clkgen_field lock_status;
 
+	struct clkgen_field nrst[QUADFS_MAX_CHAN];
 	struct clkgen_field nsb[QUADFS_MAX_CHAN];
 	struct clkgen_field en[QUADFS_MAX_CHAN];
 	struct clkgen_field mdiv[QUADFS_MAX_CHAN];
@@ -615,6 +617,9 @@ static int quadfs_fsynth_enable(struct clk_hw *hw)
 
 	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
+	if (fs->data->nrst_present)
+		CLKGEN_WRITE(fs, nrst[fs->chan], 0);
+
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
 
-- 
1.9.1

[PATCH RESEND 07/12] drivers: clk: st: Add quadfs reset handling

[Gabriel FERNANDEZ]

This patch adds the support of quadfs reset handling.

Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 5aae17c..46b29c4 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -70,12 +70,14 @@ struct clkgen_quadfs_data {
 	bool powerup_polarity;
 	bool standby_polarity;
 	bool nsdiv_present;
+	bool nrst_present;
 	struct clkgen_field ndiv;
 	struct clkgen_field ref_bw;
 	struct clkgen_field nreset;
 	struct clkgen_field npda;
 	struct clkgen_field lock_status;
 
+	struct clkgen_field nrst[QUADFS_MAX_CHAN];
 	struct clkgen_field nsb[QUADFS_MAX_CHAN];
 	struct clkgen_field en[QUADFS_MAX_CHAN];
 	struct clkgen_field mdiv[QUADFS_MAX_CHAN];
@@ -615,6 +617,9 @@ static int quadfs_fsynth_enable(struct clk_hw *hw)
 
 	CLKGEN_WRITE(fs, nsb[fs->chan], !fs->data->standby_polarity);
 
+	if (fs->data->nrst_present)
+		CLKGEN_WRITE(fs, nrst[fs->chan], 0);
+
 	if (fs->lock)
 		spin_unlock_irqrestore(fs->lock, flags);
 
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 07/12] drivers: clk: st: Add quadfs reset handling

[Peter Griffin]

Hi Gabi,

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch adds the support of quadfs reset handling.
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>a

Don't you also want your signed-off-by?

Apart from that:
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 07/12] drivers: clk: st: Add quadfs reset handling

[Peter Griffin]

Hi Gabi,

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch adds the support of quadfs reset handling.
> 
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>a

Don't you also want your signed-off-by?

Apart from that:
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenC0
It includes 2 c32 type PLL and a 660 Quadfs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/st/clkgen-pll.c  | 32 ++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 46b29c4..68c6786 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -255,6 +255,49 @@ static struct clkgen_quadfs_data st_fs660c32_F_416 = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static struct clkgen_quadfs_data st_fs660c32_C_407 = {
+	.nrst_present = true,
+	.nrst	= { CLKGEN_FIELD(0x2f0, 0x1, 0),
+		    CLKGEN_FIELD(0x2f0, 0x1, 1),
+		    CLKGEN_FIELD(0x2f0, 0x1, 2),
+		    CLKGEN_FIELD(0x2f0, 0x1, 3) },
+	.npda	= CLKGEN_FIELD(0x2f0, 0x1, 12),
+	.nsb	= { CLKGEN_FIELD(0x2f0, 0x1, 8),
+		    CLKGEN_FIELD(0x2f0, 0x1, 9),
+		    CLKGEN_FIELD(0x2f0, 0x1, 10),
+		    CLKGEN_FIELD(0x2f0, 0x1, 11) },
+	.nsdiv_present = true,
+	.nsdiv	= { CLKGEN_FIELD(0x304, 0x1, 24),
+		    CLKGEN_FIELD(0x308, 0x1, 24),
+		    CLKGEN_FIELD(0x30c, 0x1, 24),
+		    CLKGEN_FIELD(0x310, 0x1, 24) },
+	.mdiv	= { CLKGEN_FIELD(0x304, 0x1f, 15),
+		    CLKGEN_FIELD(0x308, 0x1f, 15),
+		    CLKGEN_FIELD(0x30c, 0x1f, 15),
+		    CLKGEN_FIELD(0x310, 0x1f, 15) },
+	.en	= { CLKGEN_FIELD(0x2fc, 0x1, 0),
+		    CLKGEN_FIELD(0x2fc, 0x1, 1),
+		    CLKGEN_FIELD(0x2fc, 0x1, 2),
+		    CLKGEN_FIELD(0x2fc, 0x1, 3) },
+	.ndiv	= CLKGEN_FIELD(0x2f4, 0x7, 16),
+	.pe	= { CLKGEN_FIELD(0x304, 0x7fff, 0),
+		    CLKGEN_FIELD(0x308, 0x7fff, 0),
+		    CLKGEN_FIELD(0x30c, 0x7fff, 0),
+		    CLKGEN_FIELD(0x310, 0x7fff, 0) },
+	.sdiv	= { CLKGEN_FIELD(0x304, 0xf, 20),
+		    CLKGEN_FIELD(0x308, 0xf, 20),
+		    CLKGEN_FIELD(0x30c, 0xf, 20),
+		    CLKGEN_FIELD(0x310, 0xf, 20) },
+	.lockstatus_present = true,
+	.lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
+	.powerup_polarity = 1,
+	.standby_polarity = 1,
+	.pll_ops	= &st_quadfs_pll_c32_ops,
+	.rtbl		= fs660c32_rtbl,
+	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_rate	= clk_fs660c32_dig_get_rate,
+};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -938,6 +981,10 @@ static struct of_device_id quadfs_of_match[] = {
 		.compatible = "st,stih416-quadfs660-F",
 		.data = (void *)&st_fs660c32_F_416
 	},
+	{
+		.compatible = "st,stih407-quadfs660-C",
+		.data = (void *)&st_fs660c32_C_407
+	},
 	{}
 };
 
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 6916cfa..8952566 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -192,6 +192,30 @@ static struct clkgen_pll_data st_pll3200c32_407_a0 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_c0_0 = {
+	/* 407 C0 PLL0 */
+	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2b4, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
+static struct clkgen_pll_data st_pll3200c32_407_c0_1 = {
+	/* 407 C0 PLL1 */
+	.pdn_status	= CLKGEN_FIELD(0x2c8,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2c8,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2cc,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2cc,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2dc, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2dc, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -588,6 +612,14 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih407-plls-c32-a0",
 		.data = &st_pll3200c32_407_a0,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_0",
+		.data = &st_pll3200c32_407_c0_0,
+	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_1",
+		.data = &st_pll3200c32_407_c0_1,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenC0
It includes 2 c32 type PLL and a 660 Quadfs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/st/clkgen-pll.c  | 32 ++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 46b29c4..68c6786 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -255,6 +255,49 @@ static struct clkgen_quadfs_data st_fs660c32_F_416 = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static struct clkgen_quadfs_data st_fs660c32_C_407 = {
+	.nrst_present = true,
+	.nrst	= { CLKGEN_FIELD(0x2f0, 0x1, 0),
+		    CLKGEN_FIELD(0x2f0, 0x1, 1),
+		    CLKGEN_FIELD(0x2f0, 0x1, 2),
+		    CLKGEN_FIELD(0x2f0, 0x1, 3) },
+	.npda	= CLKGEN_FIELD(0x2f0, 0x1, 12),
+	.nsb	= { CLKGEN_FIELD(0x2f0, 0x1, 8),
+		    CLKGEN_FIELD(0x2f0, 0x1, 9),
+		    CLKGEN_FIELD(0x2f0, 0x1, 10),
+		    CLKGEN_FIELD(0x2f0, 0x1, 11) },
+	.nsdiv_present = true,
+	.nsdiv	= { CLKGEN_FIELD(0x304, 0x1, 24),
+		    CLKGEN_FIELD(0x308, 0x1, 24),
+		    CLKGEN_FIELD(0x30c, 0x1, 24),
+		    CLKGEN_FIELD(0x310, 0x1, 24) },
+	.mdiv	= { CLKGEN_FIELD(0x304, 0x1f, 15),
+		    CLKGEN_FIELD(0x308, 0x1f, 15),
+		    CLKGEN_FIELD(0x30c, 0x1f, 15),
+		    CLKGEN_FIELD(0x310, 0x1f, 15) },
+	.en	= { CLKGEN_FIELD(0x2fc, 0x1, 0),
+		    CLKGEN_FIELD(0x2fc, 0x1, 1),
+		    CLKGEN_FIELD(0x2fc, 0x1, 2),
+		    CLKGEN_FIELD(0x2fc, 0x1, 3) },
+	.ndiv	= CLKGEN_FIELD(0x2f4, 0x7, 16),
+	.pe	= { CLKGEN_FIELD(0x304, 0x7fff, 0),
+		    CLKGEN_FIELD(0x308, 0x7fff, 0),
+		    CLKGEN_FIELD(0x30c, 0x7fff, 0),
+		    CLKGEN_FIELD(0x310, 0x7fff, 0) },
+	.sdiv	= { CLKGEN_FIELD(0x304, 0xf, 20),
+		    CLKGEN_FIELD(0x308, 0xf, 20),
+		    CLKGEN_FIELD(0x30c, 0xf, 20),
+		    CLKGEN_FIELD(0x310, 0xf, 20) },
+	.lockstatus_present = true,
+	.lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
+	.powerup_polarity = 1,
+	.standby_polarity = 1,
+	.pll_ops	= &st_quadfs_pll_c32_ops,
+	.rtbl		= fs660c32_rtbl,
+	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_rate	= clk_fs660c32_dig_get_rate,
+};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -938,6 +981,10 @@ static struct of_device_id quadfs_of_match[] = {
 		.compatible = "st,stih416-quadfs660-F",
 		.data = (void *)&st_fs660c32_F_416
 	},
+	{
+		.compatible = "st,stih407-quadfs660-C",
+		.data = (void *)&st_fs660c32_C_407
+	},
 	{}
 };
 
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 6916cfa..8952566 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -192,6 +192,30 @@ static struct clkgen_pll_data st_pll3200c32_407_a0 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_c0_0 = {
+	/* 407 C0 PLL0 */
+	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2b4, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
+static struct clkgen_pll_data st_pll3200c32_407_c0_1 = {
+	/* 407 C0 PLL1 */
+	.pdn_status	= CLKGEN_FIELD(0x2c8,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2c8,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2cc,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2cc,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2dc, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2dc, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -588,6 +612,14 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih407-plls-c32-a0",
 		.data = &st_pll3200c32_407_a0,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_0",
+		.data = &st_pll3200c32_407_c0_0,
+	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_1",
+		.data = &st_pll3200c32_407_c0_1,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenC0
It includes 2 c32 type PLL and a 660 Quadfs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/st/clkgen-pll.c  | 32 ++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 46b29c4..68c6786 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -255,6 +255,49 @@ static struct clkgen_quadfs_data st_fs660c32_F_416 = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static struct clkgen_quadfs_data st_fs660c32_C_407 = {
+	.nrst_present = true,
+	.nrst	= { CLKGEN_FIELD(0x2f0, 0x1, 0),
+		    CLKGEN_FIELD(0x2f0, 0x1, 1),
+		    CLKGEN_FIELD(0x2f0, 0x1, 2),
+		    CLKGEN_FIELD(0x2f0, 0x1, 3) },
+	.npda	= CLKGEN_FIELD(0x2f0, 0x1, 12),
+	.nsb	= { CLKGEN_FIELD(0x2f0, 0x1, 8),
+		    CLKGEN_FIELD(0x2f0, 0x1, 9),
+		    CLKGEN_FIELD(0x2f0, 0x1, 10),
+		    CLKGEN_FIELD(0x2f0, 0x1, 11) },
+	.nsdiv_present = true,
+	.nsdiv	= { CLKGEN_FIELD(0x304, 0x1, 24),
+		    CLKGEN_FIELD(0x308, 0x1, 24),
+		    CLKGEN_FIELD(0x30c, 0x1, 24),
+		    CLKGEN_FIELD(0x310, 0x1, 24) },
+	.mdiv	= { CLKGEN_FIELD(0x304, 0x1f, 15),
+		    CLKGEN_FIELD(0x308, 0x1f, 15),
+		    CLKGEN_FIELD(0x30c, 0x1f, 15),
+		    CLKGEN_FIELD(0x310, 0x1f, 15) },
+	.en	= { CLKGEN_FIELD(0x2fc, 0x1, 0),
+		    CLKGEN_FIELD(0x2fc, 0x1, 1),
+		    CLKGEN_FIELD(0x2fc, 0x1, 2),
+		    CLKGEN_FIELD(0x2fc, 0x1, 3) },
+	.ndiv	= CLKGEN_FIELD(0x2f4, 0x7, 16),
+	.pe	= { CLKGEN_FIELD(0x304, 0x7fff, 0),
+		    CLKGEN_FIELD(0x308, 0x7fff, 0),
+		    CLKGEN_FIELD(0x30c, 0x7fff, 0),
+		    CLKGEN_FIELD(0x310, 0x7fff, 0) },
+	.sdiv	= { CLKGEN_FIELD(0x304, 0xf, 20),
+		    CLKGEN_FIELD(0x308, 0xf, 20),
+		    CLKGEN_FIELD(0x30c, 0xf, 20),
+		    CLKGEN_FIELD(0x310, 0xf, 20) },
+	.lockstatus_present = true,
+	.lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
+	.powerup_polarity = 1,
+	.standby_polarity = 1,
+	.pll_ops	= &st_quadfs_pll_c32_ops,
+	.rtbl		= fs660c32_rtbl,
+	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_rate	= clk_fs660c32_dig_get_rate,
+};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -938,6 +981,10 @@ static struct of_device_id quadfs_of_match[] = {
 		.compatible = "st,stih416-quadfs660-F",
 		.data = (void *)&st_fs660c32_F_416
 	},
+	{
+		.compatible = "st,stih407-quadfs660-C",
+		.data = (void *)&st_fs660c32_C_407
+	},
 	{}
 };
 
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 6916cfa..8952566 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -192,6 +192,30 @@ static struct clkgen_pll_data st_pll3200c32_407_a0 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_c0_0 = {
+	/* 407 C0 PLL0 */
+	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2b4, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2b4, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
+static struct clkgen_pll_data st_pll3200c32_407_c0_1 = {
+	/* 407 C0 PLL1 */
+	.pdn_status	= CLKGEN_FIELD(0x2c8,	0x1,			8),
+	.locked_status	= CLKGEN_FIELD(0x2c8,	0x1,			24),
+	.ndiv		= CLKGEN_FIELD(0x2cc,	C32_NDIV_MASK,		16),
+	.idf		= CLKGEN_FIELD(0x2cc,	C32_IDF_MASK,		0x0),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x2dc, C32_ODF_MASK,		0) },
+	.odf_gate	= { CLKGEN_FIELD(0x2dc, 0x1,			6) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -588,6 +612,14 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih407-plls-c32-a0",
 		.data = &st_pll3200c32_407_a0,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_0",
+		.data = &st_pll3200c32_407_c0_0,
+	},
+	{
+		.compatible = "st,stih407-plls-c32-c0_1",
+		.data = &st_pll3200c32_407_c0_1,
+	},
 	{}
 };
 
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for DT registration of ClockGenC0
> It includes 2 c32 type PLL and a 660 Quadfs.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-fsyn.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/st/clkgen-pll.c  | 32 ++++++++++++++++++++++++++++++
>  2 files changed, 79 insertions(+)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for DT registration of ClockGenC0
> It includes 2 c32 type PLL and a 660 Quadfs.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-fsyn.c | 47 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/st/clkgen-pll.c  | 32 ++++++++++++++++++++++++++++++
>  2 files changed, 79 insertions(+)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[PATCH RESEND 09/12] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3

[Gabriel FERNANDEZ]

The patch added support for ClockGenD0/D2/D3
It includes one 660 Quadfs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 68c6786..d7a0341 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -298,6 +298,48 @@ static struct clkgen_quadfs_data st_fs660c32_C_407 = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static struct clkgen_quadfs_data st_fs660c32_D_407 = {
+	.nrst_present = true,
+	.nrst	= { CLKGEN_FIELD(0x2a0, 0x1, 0),
+		    CLKGEN_FIELD(0x2a0, 0x1, 1),
+		    CLKGEN_FIELD(0x2a0, 0x1, 2),
+		    CLKGEN_FIELD(0x2a0, 0x1, 3) },
+	.ndiv	= CLKGEN_FIELD(0x2a4, 0x7, 16),
+	.pe	= { CLKGEN_FIELD(0x2b4, 0x7fff, 0),
+		    CLKGEN_FIELD(0x2b8, 0x7fff, 0),
+		    CLKGEN_FIELD(0x2bc, 0x7fff, 0),
+		    CLKGEN_FIELD(0x2c0, 0x7fff, 0) },
+	.sdiv	= { CLKGEN_FIELD(0x2b4, 0xf, 20),
+		    CLKGEN_FIELD(0x2b8, 0xf, 20),
+		    CLKGEN_FIELD(0x2bc, 0xf, 20),
+		    CLKGEN_FIELD(0x2c0, 0xf, 20) },
+	.npda	= CLKGEN_FIELD(0x2a0, 0x1, 12),
+	.nsb	= { CLKGEN_FIELD(0x2a0, 0x1, 8),
+		    CLKGEN_FIELD(0x2a0, 0x1, 9),
+		    CLKGEN_FIELD(0x2a0, 0x1, 10),
+		    CLKGEN_FIELD(0x2a0, 0x1, 11) },
+	.nsdiv_present = true,
+	.nsdiv	= { CLKGEN_FIELD(0x2b4, 0x1, 24),
+		    CLKGEN_FIELD(0x2b8, 0x1, 24),
+		    CLKGEN_FIELD(0x2bc, 0x1, 24),
+		    CLKGEN_FIELD(0x2c0, 0x1, 24) },
+	.mdiv	= { CLKGEN_FIELD(0x2b4, 0x1f, 15),
+		    CLKGEN_FIELD(0x2b8, 0x1f, 15),
+		    CLKGEN_FIELD(0x2bc, 0x1f, 15),
+		    CLKGEN_FIELD(0x2c0, 0x1f, 15) },
+	.en	= { CLKGEN_FIELD(0x2ac, 0x1, 0),
+		    CLKGEN_FIELD(0x2ac, 0x1, 1),
+		    CLKGEN_FIELD(0x2ac, 0x1, 2),
+		    CLKGEN_FIELD(0x2ac, 0x1, 3) },
+	.lockstatus_present = true,
+	.lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
+	.powerup_polarity = 1,
+	.standby_polarity = 1,
+	.pll_ops	= &st_quadfs_pll_c32_ops,
+	.rtbl		= fs660c32_rtbl,
+	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_rate	= clk_fs660c32_dig_get_rate,};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -985,6 +1027,10 @@ static struct of_device_id quadfs_of_match[] = {
 		.compatible = "st,stih407-quadfs660-C",
 		.data = (void *)&st_fs660c32_C_407
 	},
+	{
+		.compatible = "st,stih407-quadfs660-D",
+		.data = (void *)&st_fs660c32_D_407
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 09/12] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3

[Gabriel FERNANDEZ]

The patch added support for ClockGenD0/D2/D3
It includes one 660 Quadfs.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-fsyn.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 68c6786..d7a0341 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -298,6 +298,48 @@ static struct clkgen_quadfs_data st_fs660c32_C_407 = {
 	.get_rate	= clk_fs660c32_dig_get_rate,
 };
 
+static struct clkgen_quadfs_data st_fs660c32_D_407 = {
+	.nrst_present = true,
+	.nrst	= { CLKGEN_FIELD(0x2a0, 0x1, 0),
+		    CLKGEN_FIELD(0x2a0, 0x1, 1),
+		    CLKGEN_FIELD(0x2a0, 0x1, 2),
+		    CLKGEN_FIELD(0x2a0, 0x1, 3) },
+	.ndiv	= CLKGEN_FIELD(0x2a4, 0x7, 16),
+	.pe	= { CLKGEN_FIELD(0x2b4, 0x7fff, 0),
+		    CLKGEN_FIELD(0x2b8, 0x7fff, 0),
+		    CLKGEN_FIELD(0x2bc, 0x7fff, 0),
+		    CLKGEN_FIELD(0x2c0, 0x7fff, 0) },
+	.sdiv	= { CLKGEN_FIELD(0x2b4, 0xf, 20),
+		    CLKGEN_FIELD(0x2b8, 0xf, 20),
+		    CLKGEN_FIELD(0x2bc, 0xf, 20),
+		    CLKGEN_FIELD(0x2c0, 0xf, 20) },
+	.npda	= CLKGEN_FIELD(0x2a0, 0x1, 12),
+	.nsb	= { CLKGEN_FIELD(0x2a0, 0x1, 8),
+		    CLKGEN_FIELD(0x2a0, 0x1, 9),
+		    CLKGEN_FIELD(0x2a0, 0x1, 10),
+		    CLKGEN_FIELD(0x2a0, 0x1, 11) },
+	.nsdiv_present = true,
+	.nsdiv	= { CLKGEN_FIELD(0x2b4, 0x1, 24),
+		    CLKGEN_FIELD(0x2b8, 0x1, 24),
+		    CLKGEN_FIELD(0x2bc, 0x1, 24),
+		    CLKGEN_FIELD(0x2c0, 0x1, 24) },
+	.mdiv	= { CLKGEN_FIELD(0x2b4, 0x1f, 15),
+		    CLKGEN_FIELD(0x2b8, 0x1f, 15),
+		    CLKGEN_FIELD(0x2bc, 0x1f, 15),
+		    CLKGEN_FIELD(0x2c0, 0x1f, 15) },
+	.en	= { CLKGEN_FIELD(0x2ac, 0x1, 0),
+		    CLKGEN_FIELD(0x2ac, 0x1, 1),
+		    CLKGEN_FIELD(0x2ac, 0x1, 2),
+		    CLKGEN_FIELD(0x2ac, 0x1, 3) },
+	.lockstatus_present = true,
+	.lock_status = CLKGEN_FIELD(0x2A0, 0x1, 24),
+	.powerup_polarity = 1,
+	.standby_polarity = 1,
+	.pll_ops	= &st_quadfs_pll_c32_ops,
+	.rtbl		= fs660c32_rtbl,
+	.rtbl_cnt	= ARRAY_SIZE(fs660c32_rtbl),
+	.get_rate	= clk_fs660c32_dig_get_rate,};
+
 /**
  * DOC: A Frequency Synthesizer that multiples its input clock by a fixed factor
  *
@@ -985,6 +1027,10 @@ static struct of_device_id quadfs_of_match[] = {
 		.compatible = "st,stih407-quadfs660-C",
 		.data = (void *)&st_fs660c32_C_407
 	},
+	{
+		.compatible = "st,stih407-quadfs660-D",
+		.data = (void *)&st_fs660c32_D_407
+	},
 	{}
 };
 
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 09/12] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for ClockGenD0/D2/D3
> It includes one 660 Quadfs.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-fsyn.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 09/12] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for ClockGenD0/D2/D3
> It includes one 660 Quadfs.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-fsyn.c | 46 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 46 insertions(+)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[PATCH RESEND 10/12] drivers: clk: st: STiH407: Support for clockgenA9

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenA9
It includes c32 type PLL.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 8952566..25500b3 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -216,6 +216,18 @@ static struct clkgen_pll_data st_pll3200c32_407_c0_1 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_a9 = {
+	/* 407 A9 */
+	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
+	.locked_status	= CLKGEN_FIELD(0x87c,	0x1,			0),
+	.ndiv		= CLKGEN_FIELD(0x1b0,	C32_NDIV_MASK,		0),
+	.idf		= CLKGEN_FIELD(0x1a8,	C32_IDF_MASK,		25),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x1b0, C32_ODF_MASK,		8) },
+	.odf_gate	= { CLKGEN_FIELD(0x1ac, 0x1,			28) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -620,6 +632,10 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih407-plls-c32-c0_1",
 		.data = &st_pll3200c32_407_c0_1,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-a9",
+		.data = &st_pll3200c32_407_a9,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH RESEND 10/12] drivers: clk: st: STiH407: Support for clockgenA9

[Gabriel FERNANDEZ]

The patch added support for DT registration of ClockGenA9
It includes c32 type PLL.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 8952566..25500b3 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -216,6 +216,18 @@ static struct clkgen_pll_data st_pll3200c32_407_c0_1 = {
 	.ops		= &stm_pll3200c32_ops,
 };
 
+static struct clkgen_pll_data st_pll3200c32_407_a9 = {
+	/* 407 A9 */
+	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
+	.locked_status	= CLKGEN_FIELD(0x87c,	0x1,			0),
+	.ndiv		= CLKGEN_FIELD(0x1b0,	C32_NDIV_MASK,		0),
+	.idf		= CLKGEN_FIELD(0x1a8,	C32_IDF_MASK,		25),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x1b0, C32_ODF_MASK,		8) },
+	.odf_gate	= { CLKGEN_FIELD(0x1ac, 0x1,			28) },
+	.ops		= &stm_pll3200c32_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -620,6 +632,10 @@ static struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih407-plls-c32-c0_1",
 		.data = &st_pll3200c32_407_c0_1,
 	},
+	{
+		.compatible = "st,stih407-plls-c32-a9",
+		.data = &st_pll3200c32_407_a9,
+	},
 	{}
 };
 
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 10/12] drivers: clk: st: STiH407: Support for clockgenA9

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for DT registration of ClockGenA9
> It includes c32 type PLL.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 10/12] drivers: clk: st: STiH407: Support for clockgenA9

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> The patch added support for DT registration of ClockGenA9
> It includes c32 type PLL.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>  drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65

[Gabriel FERNANDEZ]

This patch extend the range of possible frequencies of the fs432c65
and fs660c32 Quad frequency synthesizers.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
 1 file changed, 57 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index d7a0341..97a422f 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
 };
 
 static struct stm_fs fs432c65_rtbl[] = {
-	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625   Khz */
-	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108   MHz */
-	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   MHz */
+	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625     Khz */
+	{ .mdiv = 0x13, .pe = 0x777c,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
+	{ .mdiv = 0x19, .pe = 0x4d35,	.sdiv = 0x2,	.nsdiv = 0 },	/* 25.200  MHz */
+	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
+	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x2,	.nsdiv = 0 },	/* 27.027  MHz */
+	{ .mdiv = 0x16, .pe = 0x3359,	.sdiv = 0x2,	.nsdiv = 0 },	/* 28.320  MHz */
+	{ .mdiv = 0x1f, .pe = 0x2083,	.sdiv = 0x3,	.nsdiv = 1 },	/* 30.240  MHz */
+	{ .mdiv = 0x1e, .pe = 0x430d,	.sdiv = 0x3,	.nsdiv = 1 },	/* 31.500  MHz */
+	{ .mdiv = 0x17, .pe = 0x0,	.sdiv = 0x3,	.nsdiv = 1 },	/* 40.000  MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 0 },	/* 49.500  MHz */
+	{ .mdiv = 0x13, .pe = 0x6667,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
+	{ .mdiv = 0x10, .pe = 0x1ee6,	.sdiv = 0x3,	.nsdiv = 1 },	/* 57.284  MHz */
+	{ .mdiv = 0x1d, .pe = 0x3b14,	.sdiv = 0x2,	.nsdiv = 1 },	/* 65.000  MHz */
+	{ .mdiv = 0x12, .pe = 0x7c65,	.sdiv = 0x1,	.nsdiv = 0 },	/* 71.000  MHz */
+	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.176  MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.250  MHz */
+	{ .mdiv = 0x19, .pe = 0x3334,	.sdiv = 0x2,	.nsdiv = 1 },	/* 75.000  MHz */
+	{ .mdiv = 0x18, .pe = 0x5138,	.sdiv = 0x2,	.nsdiv = 1 },	/* 78.800  MHz */
+	{ .mdiv = 0x1d, .pe = 0x77d,	.sdiv = 0x0,	.nsdiv = 0 },	/* 85.500  MHz */
+	{ .mdiv = 0x1c, .pe = 0x13d5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 88.750  MHz */
+	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
+	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 108.108 MHz */
+	{ .mdiv = 0x10, .pe = 0x6e26,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
+	{ .mdiv = 0x15, .pe = 0x3e63,	.sdiv = 0x0,	.nsdiv = 0 },	/* 119.000 MHz */
+	{ .mdiv = 0x1c, .pe = 0x471d,	.sdiv = 0x1,	.nsdiv = 1 },	/* 135.000 MHz */
+	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.352 MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.500 MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297     MHz */
 };
 
 static struct stm_fs fs660c32_rtbl[] = {
-	{ .mdiv = 0x01, .pe = 0x2aaa,	.sdiv = 0x8,	.nsdiv = 0 },	/* 600   KHz */
-	{ .mdiv = 0x02, .pe = 0x3d33,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.5 Mhz */
-	{ .mdiv = 0x13, .pe = 0x5bcc,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   Mhz */
-	{ .mdiv = 0x0e, .pe = 0x1025,	.sdiv = 0x0,	.nsdiv = 1 },	/* 333   Mhz */
-	{ .mdiv = 0x0b, .pe = 0x715f,	.sdiv = 0x0,	.nsdiv = 1 },	/* 350   Mhz */
+	{ .mdiv = 0x14, .pe = 0x376b,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
+	{ .mdiv = 0x14, .pe = 0x30c3,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.200  MHz */
+	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
+	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x3,	.nsdiv = 0 },	/* 27.027  MHz */
+	{ .mdiv = 0x0e, .pe = 0x4e1a,	.sdiv = 0x4,	.nsdiv = 1 },	/* 28.320  MHz */
+	{ .mdiv = 0x0b, .pe = 0x534d,	.sdiv = 0x4,	.nsdiv = 1 },	/* 30.240  MHz */
+	{ .mdiv = 0x17, .pe = 0x6fbf,	.sdiv = 0x2,	.nsdiv = 0 },	/* 31.500  MHz */
+	{ .mdiv = 0x01, .pe = 0x0,	.sdiv = 0x4,	.nsdiv = 1 },	/* 40.000  MHz */
+	{ .mdiv = 0x15, .pe = 0x2aab,	.sdiv = 0x3,	.nsdiv = 1 },	/* 49.500  MHz */
+	{ .mdiv = 0x14, .pe = 0x6666,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
+	{ .mdiv = 0x1d, .pe = 0x395f,	.sdiv = 0x1,	.nsdiv = 0 },	/* 57.284  MHz */
+	{ .mdiv = 0x08, .pe = 0x4ec5,	.sdiv = 0x3,	.nsdiv = 1 },	/* 65.000  MHz */
+	{ .mdiv = 0x05, .pe = 0x1770,	.sdiv = 0x3,	.nsdiv = 1 },	/* 71.000  MHz */
+	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x3,	.nsdiv = 1 },	/* 74.176  MHz */
+	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x1,	.nsdiv = 0 },	/* 74.250  MHz */
+	{ .mdiv = 0x0e, .pe = 0x7777,	.sdiv = 0x1,	.nsdiv = 0 },	/* 75.000  MHz */
+	{ .mdiv = 0x01, .pe = 0x4053,	.sdiv = 0x3,	.nsdiv = 1 },	/* 78.800  MHz */
+	{ .mdiv = 0x09, .pe = 0x15b5,	.sdiv = 0x1,	.nsdiv = 0 },	/* 85.500  MHz */
+	{ .mdiv = 0x1b, .pe = 0x3f19,	.sdiv = 0x2,	.nsdiv = 1 },	/* 88.750  MHz */
+	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
+	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x1,	.nsdiv = 0 },	/* 108.108 MHz */
+	{ .mdiv = 0x0c, .pe = 0x3118,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
+	{ .mdiv = 0x0c, .pe = 0x2f54,	.sdiv = 0x2,	.nsdiv = 1 },	/* 119.000 MHz */
+	{ .mdiv = 0x07, .pe = 0xe39,	.sdiv = 0x2,	.nsdiv = 1 },	/* 135.000 MHz */
+	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 148.352 MHz */
+	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.500 MHz */
+	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x1,	.nsdiv = 1 },	/* 296.704 MHz */
+	{ .mdiv = 0x03, .pe = 0x471c,	.sdiv = 0x1,	.nsdiv = 1 },	/* 297     MHz */
+	{ .mdiv = 0x1c, .pe = 0x0,	.sdiv = 0x0,	.nsdiv = 1 },	/* 352     Mhz */
 };
 
 struct clkgen_quadfs_data {
-- 
1.9.1

[PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65

[Gabriel FERNANDEZ]

This patch extend the range of possible frequencies of the fs432c65
and fs660c32 Quad frequency synthesizers.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
 1 file changed, 57 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index d7a0341..97a422f 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
 };
 
 static struct stm_fs fs432c65_rtbl[] = {
-	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625   Khz */
-	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108   MHz */
-	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   MHz */
+	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625     Khz */
+	{ .mdiv = 0x13, .pe = 0x777c,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
+	{ .mdiv = 0x19, .pe = 0x4d35,	.sdiv = 0x2,	.nsdiv = 0 },	/* 25.200  MHz */
+	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
+	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x2,	.nsdiv = 0 },	/* 27.027  MHz */
+	{ .mdiv = 0x16, .pe = 0x3359,	.sdiv = 0x2,	.nsdiv = 0 },	/* 28.320  MHz */
+	{ .mdiv = 0x1f, .pe = 0x2083,	.sdiv = 0x3,	.nsdiv = 1 },	/* 30.240  MHz */
+	{ .mdiv = 0x1e, .pe = 0x430d,	.sdiv = 0x3,	.nsdiv = 1 },	/* 31.500  MHz */
+	{ .mdiv = 0x17, .pe = 0x0,	.sdiv = 0x3,	.nsdiv = 1 },	/* 40.000  MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 0 },	/* 49.500  MHz */
+	{ .mdiv = 0x13, .pe = 0x6667,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
+	{ .mdiv = 0x10, .pe = 0x1ee6,	.sdiv = 0x3,	.nsdiv = 1 },	/* 57.284  MHz */
+	{ .mdiv = 0x1d, .pe = 0x3b14,	.sdiv = 0x2,	.nsdiv = 1 },	/* 65.000  MHz */
+	{ .mdiv = 0x12, .pe = 0x7c65,	.sdiv = 0x1,	.nsdiv = 0 },	/* 71.000  MHz */
+	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.176  MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.250  MHz */
+	{ .mdiv = 0x19, .pe = 0x3334,	.sdiv = 0x2,	.nsdiv = 1 },	/* 75.000  MHz */
+	{ .mdiv = 0x18, .pe = 0x5138,	.sdiv = 0x2,	.nsdiv = 1 },	/* 78.800  MHz */
+	{ .mdiv = 0x1d, .pe = 0x77d,	.sdiv = 0x0,	.nsdiv = 0 },	/* 85.500  MHz */
+	{ .mdiv = 0x1c, .pe = 0x13d5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 88.750  MHz */
+	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
+	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 108.108 MHz */
+	{ .mdiv = 0x10, .pe = 0x6e26,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
+	{ .mdiv = 0x15, .pe = 0x3e63,	.sdiv = 0x0,	.nsdiv = 0 },	/* 119.000 MHz */
+	{ .mdiv = 0x1c, .pe = 0x471d,	.sdiv = 0x1,	.nsdiv = 1 },	/* 135.000 MHz */
+	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.352 MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.500 MHz */
+	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297     MHz */
 };
 
 static struct stm_fs fs660c32_rtbl[] = {
-	{ .mdiv = 0x01, .pe = 0x2aaa,	.sdiv = 0x8,	.nsdiv = 0 },	/* 600   KHz */
-	{ .mdiv = 0x02, .pe = 0x3d33,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.5 Mhz */
-	{ .mdiv = 0x13, .pe = 0x5bcc,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   Mhz */
-	{ .mdiv = 0x0e, .pe = 0x1025,	.sdiv = 0x0,	.nsdiv = 1 },	/* 333   Mhz */
-	{ .mdiv = 0x0b, .pe = 0x715f,	.sdiv = 0x0,	.nsdiv = 1 },	/* 350   Mhz */
+	{ .mdiv = 0x14, .pe = 0x376b,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
+	{ .mdiv = 0x14, .pe = 0x30c3,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.200  MHz */
+	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
+	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x3,	.nsdiv = 0 },	/* 27.027  MHz */
+	{ .mdiv = 0x0e, .pe = 0x4e1a,	.sdiv = 0x4,	.nsdiv = 1 },	/* 28.320  MHz */
+	{ .mdiv = 0x0b, .pe = 0x534d,	.sdiv = 0x4,	.nsdiv = 1 },	/* 30.240  MHz */
+	{ .mdiv = 0x17, .pe = 0x6fbf,	.sdiv = 0x2,	.nsdiv = 0 },	/* 31.500  MHz */
+	{ .mdiv = 0x01, .pe = 0x0,	.sdiv = 0x4,	.nsdiv = 1 },	/* 40.000  MHz */
+	{ .mdiv = 0x15, .pe = 0x2aab,	.sdiv = 0x3,	.nsdiv = 1 },	/* 49.500  MHz */
+	{ .mdiv = 0x14, .pe = 0x6666,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
+	{ .mdiv = 0x1d, .pe = 0x395f,	.sdiv = 0x1,	.nsdiv = 0 },	/* 57.284  MHz */
+	{ .mdiv = 0x08, .pe = 0x4ec5,	.sdiv = 0x3,	.nsdiv = 1 },	/* 65.000  MHz */
+	{ .mdiv = 0x05, .pe = 0x1770,	.sdiv = 0x3,	.nsdiv = 1 },	/* 71.000  MHz */
+	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x3,	.nsdiv = 1 },	/* 74.176  MHz */
+	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x1,	.nsdiv = 0 },	/* 74.250  MHz */
+	{ .mdiv = 0x0e, .pe = 0x7777,	.sdiv = 0x1,	.nsdiv = 0 },	/* 75.000  MHz */
+	{ .mdiv = 0x01, .pe = 0x4053,	.sdiv = 0x3,	.nsdiv = 1 },	/* 78.800  MHz */
+	{ .mdiv = 0x09, .pe = 0x15b5,	.sdiv = 0x1,	.nsdiv = 0 },	/* 85.500  MHz */
+	{ .mdiv = 0x1b, .pe = 0x3f19,	.sdiv = 0x2,	.nsdiv = 1 },	/* 88.750  MHz */
+	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
+	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x1,	.nsdiv = 0 },	/* 108.108 MHz */
+	{ .mdiv = 0x0c, .pe = 0x3118,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
+	{ .mdiv = 0x0c, .pe = 0x2f54,	.sdiv = 0x2,	.nsdiv = 1 },	/* 119.000 MHz */
+	{ .mdiv = 0x07, .pe = 0xe39,	.sdiv = 0x2,	.nsdiv = 1 },	/* 135.000 MHz */
+	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 148.352 MHz */
+	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.500 MHz */
+	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x1,	.nsdiv = 1 },	/* 296.704 MHz */
+	{ .mdiv = 0x03, .pe = 0x471c,	.sdiv = 0x1,	.nsdiv = 1 },	/* 297     MHz */
+	{ .mdiv = 0x1c, .pe = 0x0,	.sdiv = 0x0,	.nsdiv = 1 },	/* 352     Mhz */
 };
 
 struct clkgen_quadfs_data {
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65

[Peter Griffin]

Hi Gabi,

See my comment below

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch extend the range of possible frequencies of the fs432c65
> and fs660c32 Quad frequency synthesizers.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
>  1 file changed, 57 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
> index d7a0341..97a422f 100644
> --- a/drivers/clk/st/clkgen-fsyn.c
> +++ b/drivers/clk/st/clkgen-fsyn.c
> @@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
>  };
>  
>  static struct stm_fs fs432c65_rtbl[] = {
> -	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625   Khz */
> -	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108   MHz */
> -	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   MHz */
> +	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625     Khz */
> +	{ .mdiv = 0x13, .pe = 0x777c,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
> +	{ .mdiv = 0x19, .pe = 0x4d35,	.sdiv = 0x2,	.nsdiv = 0 },	/* 25.200  MHz */
> +	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
> +	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x2,	.nsdiv = 0 },	/* 27.027  MHz */
> +	{ .mdiv = 0x16, .pe = 0x3359,	.sdiv = 0x2,	.nsdiv = 0 },	/* 28.320  MHz */
> +	{ .mdiv = 0x1f, .pe = 0x2083,	.sdiv = 0x3,	.nsdiv = 1 },	/* 30.240  MHz */
> +	{ .mdiv = 0x1e, .pe = 0x430d,	.sdiv = 0x3,	.nsdiv = 1 },	/* 31.500  MHz */
> +	{ .mdiv = 0x17, .pe = 0x0,	.sdiv = 0x3,	.nsdiv = 1 },	/* 40.000  MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 0 },	/* 49.500  MHz */
> +	{ .mdiv = 0x13, .pe = 0x6667,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
> +	{ .mdiv = 0x10, .pe = 0x1ee6,	.sdiv = 0x3,	.nsdiv = 1 },	/* 57.284  MHz */
> +	{ .mdiv = 0x1d, .pe = 0x3b14,	.sdiv = 0x2,	.nsdiv = 1 },	/* 65.000  MHz */
> +	{ .mdiv = 0x12, .pe = 0x7c65,	.sdiv = 0x1,	.nsdiv = 0 },	/* 71.000  MHz */
> +	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.176  MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.250  MHz */
> +	{ .mdiv = 0x19, .pe = 0x3334,	.sdiv = 0x2,	.nsdiv = 1 },	/* 75.000  MHz */
> +	{ .mdiv = 0x18, .pe = 0x5138,	.sdiv = 0x2,	.nsdiv = 1 },	/* 78.800  MHz */
> +	{ .mdiv = 0x1d, .pe = 0x77d,	.sdiv = 0x0,	.nsdiv = 0 },	/* 85.500  MHz */
> +	{ .mdiv = 0x1c, .pe = 0x13d5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 88.750  MHz */
> +	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
> +	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 108.108 MHz */
> +	{ .mdiv = 0x10, .pe = 0x6e26,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
> +	{ .mdiv = 0x15, .pe = 0x3e63,	.sdiv = 0x0,	.nsdiv = 0 },	/* 119.000 MHz */
> +	{ .mdiv = 0x1c, .pe = 0x471d,	.sdiv = 0x1,	.nsdiv = 1 },	/* 135.000 MHz */
> +	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.352 MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.500 MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297     MHz */
>  };
>  
>  static struct stm_fs fs660c32_rtbl[] = {
> -	{ .mdiv = 0x01, .pe = 0x2aaa,	.sdiv = 0x8,	.nsdiv = 0 },	/* 600   KHz */
> -	{ .mdiv = 0x02, .pe = 0x3d33,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.5 Mhz */
> -	{ .mdiv = 0x13, .pe = 0x5bcc,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   Mhz */
> -	{ .mdiv = 0x0e, .pe = 0x1025,	.sdiv = 0x0,	.nsdiv = 1 },	/* 333   Mhz */
> -	{ .mdiv = 0x0b, .pe = 0x715f,	.sdiv = 0x0,	.nsdiv = 1 },	/* 350   Mhz */
> +	{ .mdiv = 0x14, .pe = 0x376b,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
> +	{ .mdiv = 0x14, .pe = 0x30c3,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.200  MHz */
> +	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
> +	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x3,	.nsdiv = 0 },	/* 27.027  MHz */
> +	{ .mdiv = 0x0e, .pe = 0x4e1a,	.sdiv = 0x4,	.nsdiv = 1 },	/* 28.320  MHz */
> +	{ .mdiv = 0x0b, .pe = 0x534d,	.sdiv = 0x4,	.nsdiv = 1 },	/* 30.240  MHz */
> +	{ .mdiv = 0x17, .pe = 0x6fbf,	.sdiv = 0x2,	.nsdiv = 0 },	/* 31.500  MHz */
> +	{ .mdiv = 0x01, .pe = 0x0,	.sdiv = 0x4,	.nsdiv = 1 },	/* 40.000  MHz */
> +	{ .mdiv = 0x15, .pe = 0x2aab,	.sdiv = 0x3,	.nsdiv = 1 },	/* 49.500  MHz */
> +	{ .mdiv = 0x14, .pe = 0x6666,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
> +	{ .mdiv = 0x1d, .pe = 0x395f,	.sdiv = 0x1,	.nsdiv = 0 },	/* 57.284  MHz */
> +	{ .mdiv = 0x08, .pe = 0x4ec5,	.sdiv = 0x3,	.nsdiv = 1 },	/* 65.000  MHz */
> +	{ .mdiv = 0x05, .pe = 0x1770,	.sdiv = 0x3,	.nsdiv = 1 },	/* 71.000  MHz */
> +	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x3,	.nsdiv = 1 },	/* 74.176  MHz */
> +	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x1,	.nsdiv = 0 },	/* 74.250  MHz */
> +	{ .mdiv = 0x0e, .pe = 0x7777,	.sdiv = 0x1,	.nsdiv = 0 },	/* 75.000  MHz */
> +	{ .mdiv = 0x01, .pe = 0x4053,	.sdiv = 0x3,	.nsdiv = 1 },	/* 78.800  MHz */
> +	{ .mdiv = 0x09, .pe = 0x15b5,	.sdiv = 0x1,	.nsdiv = 0 },	/* 85.500  MHz */
> +	{ .mdiv = 0x1b, .pe = 0x3f19,	.sdiv = 0x2,	.nsdiv = 1 },	/* 88.750  MHz */
> +	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
> +	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x1,	.nsdiv = 0 },	/* 108.108 MHz */
> +	{ .mdiv = 0x0c, .pe = 0x3118,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
> +	{ .mdiv = 0x0c, .pe = 0x2f54,	.sdiv = 0x2,	.nsdiv = 1 },	/* 119.000 MHz */
> +	{ .mdiv = 0x07, .pe = 0xe39,	.sdiv = 0x2,	.nsdiv = 1 },	/* 135.000 MHz */
> +	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 148.352 MHz */
> +	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.500 MHz */
> +	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x1,	.nsdiv = 1 },	/* 296.704 MHz */
> +	{ .mdiv = 0x03, .pe = 0x471c,	.sdiv = 0x1,	.nsdiv = 1 },	/* 297     MHz */
> +	{ .mdiv = 0x1c, .pe = 0x0,	.sdiv = 0x0,	.nsdiv = 1 },	/* 352     Mhz */
>  };

These lookup tables should be 'static const'

Once fixed:
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter.

[STLinux Kernel] [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65

[Peter Griffin]

Hi Gabi,

See my comment below

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch extend the range of possible frequencies of the fs432c65
> and fs660c32 Quad frequency synthesizers.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
>  1 file changed, 57 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
> index d7a0341..97a422f 100644
> --- a/drivers/clk/st/clkgen-fsyn.c
> +++ b/drivers/clk/st/clkgen-fsyn.c
> @@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
>  };
>  
>  static struct stm_fs fs432c65_rtbl[] = {
> -	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625   Khz */
> -	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108   MHz */
> -	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   MHz */
> +	{ .mdiv = 0x1f, .pe = 0x0,	.sdiv = 0x7,	.nsdiv = 0 },	/* 625     Khz */
> +	{ .mdiv = 0x13, .pe = 0x777c,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
> +	{ .mdiv = 0x19, .pe = 0x4d35,	.sdiv = 0x2,	.nsdiv = 0 },	/* 25.200  MHz */
> +	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
> +	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x2,	.nsdiv = 0 },	/* 27.027  MHz */
> +	{ .mdiv = 0x16, .pe = 0x3359,	.sdiv = 0x2,	.nsdiv = 0 },	/* 28.320  MHz */
> +	{ .mdiv = 0x1f, .pe = 0x2083,	.sdiv = 0x3,	.nsdiv = 1 },	/* 30.240  MHz */
> +	{ .mdiv = 0x1e, .pe = 0x430d,	.sdiv = 0x3,	.nsdiv = 1 },	/* 31.500  MHz */
> +	{ .mdiv = 0x17, .pe = 0x0,	.sdiv = 0x3,	.nsdiv = 1 },	/* 40.000  MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 0 },	/* 49.500  MHz */
> +	{ .mdiv = 0x13, .pe = 0x6667,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
> +	{ .mdiv = 0x10, .pe = 0x1ee6,	.sdiv = 0x3,	.nsdiv = 1 },	/* 57.284  MHz */
> +	{ .mdiv = 0x1d, .pe = 0x3b14,	.sdiv = 0x2,	.nsdiv = 1 },	/* 65.000  MHz */
> +	{ .mdiv = 0x12, .pe = 0x7c65,	.sdiv = 0x1,	.nsdiv = 0 },	/* 71.000  MHz */
> +	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.176  MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x2,	.nsdiv = 1 },	/* 74.250  MHz */
> +	{ .mdiv = 0x19, .pe = 0x3334,	.sdiv = 0x2,	.nsdiv = 1 },	/* 75.000  MHz */
> +	{ .mdiv = 0x18, .pe = 0x5138,	.sdiv = 0x2,	.nsdiv = 1 },	/* 78.800  MHz */
> +	{ .mdiv = 0x1d, .pe = 0x77d,	.sdiv = 0x0,	.nsdiv = 0 },	/* 85.500  MHz */
> +	{ .mdiv = 0x1c, .pe = 0x13d5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 88.750  MHz */
> +	{ .mdiv = 0x11, .pe = 0x1c72,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
> +	{ .mdiv = 0x17, .pe = 0x28f5,	.sdiv = 0x0,	.nsdiv = 0 },	/* 108.108 MHz */
> +	{ .mdiv = 0x10, .pe = 0x6e26,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
> +	{ .mdiv = 0x15, .pe = 0x3e63,	.sdiv = 0x0,	.nsdiv = 0 },	/* 119.000 MHz */
> +	{ .mdiv = 0x1c, .pe = 0x471d,	.sdiv = 0x1,	.nsdiv = 1 },	/* 135.000 MHz */
> +	{ .mdiv = 0x19, .pe = 0xecd,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.352 MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x1,	.nsdiv = 1 },	/* 148.500 MHz */
> +	{ .mdiv = 0x19, .pe = 0x121a,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297     MHz */
>  };
>  
>  static struct stm_fs fs660c32_rtbl[] = {
> -	{ .mdiv = 0x01, .pe = 0x2aaa,	.sdiv = 0x8,	.nsdiv = 0 },	/* 600   KHz */
> -	{ .mdiv = 0x02, .pe = 0x3d33,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.5 Mhz */
> -	{ .mdiv = 0x13, .pe = 0x5bcc,	.sdiv = 0x0,	.nsdiv = 1 },	/* 297   Mhz */
> -	{ .mdiv = 0x0e, .pe = 0x1025,	.sdiv = 0x0,	.nsdiv = 1 },	/* 333   Mhz */
> -	{ .mdiv = 0x0b, .pe = 0x715f,	.sdiv = 0x0,	.nsdiv = 1 },	/* 350   Mhz */
> +	{ .mdiv = 0x14, .pe = 0x376b,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.175  MHz */
> +	{ .mdiv = 0x14, .pe = 0x30c3,	.sdiv = 0x4,	.nsdiv = 1 },	/* 25.200  MHz */
> +	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x4,	.nsdiv = 1 },	/* 27.000  MHz */
> +	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x3,	.nsdiv = 0 },	/* 27.027  MHz */
> +	{ .mdiv = 0x0e, .pe = 0x4e1a,	.sdiv = 0x4,	.nsdiv = 1 },	/* 28.320  MHz */
> +	{ .mdiv = 0x0b, .pe = 0x534d,	.sdiv = 0x4,	.nsdiv = 1 },	/* 30.240  MHz */
> +	{ .mdiv = 0x17, .pe = 0x6fbf,	.sdiv = 0x2,	.nsdiv = 0 },	/* 31.500  MHz */
> +	{ .mdiv = 0x01, .pe = 0x0,	.sdiv = 0x4,	.nsdiv = 1 },	/* 40.000  MHz */
> +	{ .mdiv = 0x15, .pe = 0x2aab,	.sdiv = 0x3,	.nsdiv = 1 },	/* 49.500  MHz */
> +	{ .mdiv = 0x14, .pe = 0x6666,	.sdiv = 0x3,	.nsdiv = 1 },	/* 50.000  MHz */
> +	{ .mdiv = 0x1d, .pe = 0x395f,	.sdiv = 0x1,	.nsdiv = 0 },	/* 57.284  MHz */
> +	{ .mdiv = 0x08, .pe = 0x4ec5,	.sdiv = 0x3,	.nsdiv = 1 },	/* 65.000  MHz */
> +	{ .mdiv = 0x05, .pe = 0x1770,	.sdiv = 0x3,	.nsdiv = 1 },	/* 71.000  MHz */
> +	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x3,	.nsdiv = 1 },	/* 74.176  MHz */
> +	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x1,	.nsdiv = 0 },	/* 74.250  MHz */
> +	{ .mdiv = 0x0e, .pe = 0x7777,	.sdiv = 0x1,	.nsdiv = 0 },	/* 75.000  MHz */
> +	{ .mdiv = 0x01, .pe = 0x4053,	.sdiv = 0x3,	.nsdiv = 1 },	/* 78.800  MHz */
> +	{ .mdiv = 0x09, .pe = 0x15b5,	.sdiv = 0x1,	.nsdiv = 0 },	/* 85.500  MHz */
> +	{ .mdiv = 0x1b, .pe = 0x3f19,	.sdiv = 0x2,	.nsdiv = 1 },	/* 88.750  MHz */
> +	{ .mdiv = 0x10, .pe = 0x71c7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 108.000 MHz */
> +	{ .mdiv = 0x00, .pe = 0x47af,	.sdiv = 0x1,	.nsdiv = 0 },	/* 108.108 MHz */
> +	{ .mdiv = 0x0c, .pe = 0x3118,	.sdiv = 0x2,	.nsdiv = 1 },	/* 118.963 MHz */
> +	{ .mdiv = 0x0c, .pe = 0x2f54,	.sdiv = 0x2,	.nsdiv = 1 },	/* 119.000 MHz */
> +	{ .mdiv = 0x07, .pe = 0xe39,	.sdiv = 0x2,	.nsdiv = 1 },	/* 135.000 MHz */
> +	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x2,	.nsdiv = 1 },	/* 148.352 MHz */
> +	{ .mdiv = 0x0f, .pe = 0x3426,	.sdiv = 0x0,	.nsdiv = 0 },	/* 148.500 MHz */
> +	{ .mdiv = 0x03, .pe = 0x4ba7,	.sdiv = 0x1,	.nsdiv = 1 },	/* 296.704 MHz */
> +	{ .mdiv = 0x03, .pe = 0x471c,	.sdiv = 0x1,	.nsdiv = 1 },	/* 297     MHz */
> +	{ .mdiv = 0x1c, .pe = 0x0,	.sdiv = 0x0,	.nsdiv = 1 },	/* 352     Mhz */
>  };

These lookup tables should be 'static const'

Once fixed:
 Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter.

Re: [STLinux Kernel] [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65

[Gabriel Fernandez]

On 5 June 2014 13:13, Peter Griffin <peter.griffin@linaro.org> wrote:
> Hi Gabi,
>
> See my comment below
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> This patch extend the range of possible frequencies of the fs432c65
>> and fs660c32 Quad frequency synthesizers.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> ---
>>  drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
>>  1 file changed, 57 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
>> index d7a0341..97a422f 100644
>> --- a/drivers/clk/st/clkgen-fsyn.c
>> +++ b/drivers/clk/st/clkgen-fsyn.c
>> @@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
>>  };
>>
>>  static struct stm_fs fs432c65_rtbl[] = {
>> -     { .mdiv = 0x1f, .pe = 0x0,      .sdiv = 0x7,    .nsdiv = 0 },   /* 625   Khz */
>> -     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108   MHz */
>> -     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297   MHz */
>> +     { .mdiv = 0x1f, .pe = 0x0,      .sdiv = 0x7,    .nsdiv = 0 },   /* 625     Khz */
>> +     { .mdiv = 0x13, .pe = 0x777c,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.175  MHz */
>> +     { .mdiv = 0x19, .pe = 0x4d35,   .sdiv = 0x2,    .nsdiv = 0 },   /* 25.200  MHz */
>> +     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x4,    .nsdiv = 1 },   /* 27.000  MHz */
>> +     { .mdiv = 0x17, .pe = 0x28f5,   .sdiv = 0x2,    .nsdiv = 0 },   /* 27.027  MHz */
>> +     { .mdiv = 0x16, .pe = 0x3359,   .sdiv = 0x2,    .nsdiv = 0 },   /* 28.320  MHz */
>> +     { .mdiv = 0x1f, .pe = 0x2083,   .sdiv = 0x3,    .nsdiv = 1 },   /* 30.240  MHz */
>> +     { .mdiv = 0x1e, .pe = 0x430d,   .sdiv = 0x3,    .nsdiv = 1 },   /* 31.500  MHz */
>> +     { .mdiv = 0x17, .pe = 0x0,      .sdiv = 0x3,    .nsdiv = 1 },   /* 40.000  MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x1,    .nsdiv = 0 },   /* 49.500  MHz */
>> +     { .mdiv = 0x13, .pe = 0x6667,   .sdiv = 0x3,    .nsdiv = 1 },   /* 50.000  MHz */
>> +     { .mdiv = 0x10, .pe = 0x1ee6,   .sdiv = 0x3,    .nsdiv = 1 },   /* 57.284  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x3b14,   .sdiv = 0x2,    .nsdiv = 1 },   /* 65.000  MHz */
>> +     { .mdiv = 0x12, .pe = 0x7c65,   .sdiv = 0x1,    .nsdiv = 0 },   /* 71.000  MHz */
>> +     { .mdiv = 0x19, .pe = 0xecd,    .sdiv = 0x2,    .nsdiv = 1 },   /* 74.176  MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x2,    .nsdiv = 1 },   /* 74.250  MHz */
>> +     { .mdiv = 0x19, .pe = 0x3334,   .sdiv = 0x2,    .nsdiv = 1 },   /* 75.000  MHz */
>> +     { .mdiv = 0x18, .pe = 0x5138,   .sdiv = 0x2,    .nsdiv = 1 },   /* 78.800  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x77d,    .sdiv = 0x0,    .nsdiv = 0 },   /* 85.500  MHz */
>> +     { .mdiv = 0x1c, .pe = 0x13d5,   .sdiv = 0x0,    .nsdiv = 0 },   /* 88.750  MHz */
>> +     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108.000 MHz */
>> +     { .mdiv = 0x17, .pe = 0x28f5,   .sdiv = 0x0,    .nsdiv = 0 },   /* 108.108 MHz */
>> +     { .mdiv = 0x10, .pe = 0x6e26,   .sdiv = 0x2,    .nsdiv = 1 },   /* 118.963 MHz */
>> +     { .mdiv = 0x15, .pe = 0x3e63,   .sdiv = 0x0,    .nsdiv = 0 },   /* 119.000 MHz */
>> +     { .mdiv = 0x1c, .pe = 0x471d,   .sdiv = 0x1,    .nsdiv = 1 },   /* 135.000 MHz */
>> +     { .mdiv = 0x19, .pe = 0xecd,    .sdiv = 0x1,    .nsdiv = 1 },   /* 148.352 MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x1,    .nsdiv = 1 },   /* 148.500 MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297     MHz */
>>  };
>>
>>  static struct stm_fs fs660c32_rtbl[] = {
>> -     { .mdiv = 0x01, .pe = 0x2aaa,   .sdiv = 0x8,    .nsdiv = 0 },   /* 600   KHz */
>> -     { .mdiv = 0x02, .pe = 0x3d33,   .sdiv = 0x0,    .nsdiv = 0 },   /* 148.5 Mhz */
>> -     { .mdiv = 0x13, .pe = 0x5bcc,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297   Mhz */
>> -     { .mdiv = 0x0e, .pe = 0x1025,   .sdiv = 0x0,    .nsdiv = 1 },   /* 333   Mhz */
>> -     { .mdiv = 0x0b, .pe = 0x715f,   .sdiv = 0x0,    .nsdiv = 1 },   /* 350   Mhz */
>> +     { .mdiv = 0x14, .pe = 0x376b,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.175  MHz */
>> +     { .mdiv = 0x14, .pe = 0x30c3,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.200  MHz */
>> +     { .mdiv = 0x10, .pe = 0x71c7,   .sdiv = 0x4,    .nsdiv = 1 },   /* 27.000  MHz */
>> +     { .mdiv = 0x00, .pe = 0x47af,   .sdiv = 0x3,    .nsdiv = 0 },   /* 27.027  MHz */
>> +     { .mdiv = 0x0e, .pe = 0x4e1a,   .sdiv = 0x4,    .nsdiv = 1 },   /* 28.320  MHz */
>> +     { .mdiv = 0x0b, .pe = 0x534d,   .sdiv = 0x4,    .nsdiv = 1 },   /* 30.240  MHz */
>> +     { .mdiv = 0x17, .pe = 0x6fbf,   .sdiv = 0x2,    .nsdiv = 0 },   /* 31.500  MHz */
>> +     { .mdiv = 0x01, .pe = 0x0,      .sdiv = 0x4,    .nsdiv = 1 },   /* 40.000  MHz */
>> +     { .mdiv = 0x15, .pe = 0x2aab,   .sdiv = 0x3,    .nsdiv = 1 },   /* 49.500  MHz */
>> +     { .mdiv = 0x14, .pe = 0x6666,   .sdiv = 0x3,    .nsdiv = 1 },   /* 50.000  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x395f,   .sdiv = 0x1,    .nsdiv = 0 },   /* 57.284  MHz */
>> +     { .mdiv = 0x08, .pe = 0x4ec5,   .sdiv = 0x3,    .nsdiv = 1 },   /* 65.000  MHz */
>> +     { .mdiv = 0x05, .pe = 0x1770,   .sdiv = 0x3,    .nsdiv = 1 },   /* 71.000  MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x3,    .nsdiv = 1 },   /* 74.176  MHz */
>> +     { .mdiv = 0x0f, .pe = 0x3426,   .sdiv = 0x1,    .nsdiv = 0 },   /* 74.250  MHz */
>> +     { .mdiv = 0x0e, .pe = 0x7777,   .sdiv = 0x1,    .nsdiv = 0 },   /* 75.000  MHz */
>> +     { .mdiv = 0x01, .pe = 0x4053,   .sdiv = 0x3,    .nsdiv = 1 },   /* 78.800  MHz */
>> +     { .mdiv = 0x09, .pe = 0x15b5,   .sdiv = 0x1,    .nsdiv = 0 },   /* 85.500  MHz */
>> +     { .mdiv = 0x1b, .pe = 0x3f19,   .sdiv = 0x2,    .nsdiv = 1 },   /* 88.750  MHz */
>> +     { .mdiv = 0x10, .pe = 0x71c7,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108.000 MHz */
>> +     { .mdiv = 0x00, .pe = 0x47af,   .sdiv = 0x1,    .nsdiv = 0 },   /* 108.108 MHz */
>> +     { .mdiv = 0x0c, .pe = 0x3118,   .sdiv = 0x2,    .nsdiv = 1 },   /* 118.963 MHz */
>> +     { .mdiv = 0x0c, .pe = 0x2f54,   .sdiv = 0x2,    .nsdiv = 1 },   /* 119.000 MHz */
>> +     { .mdiv = 0x07, .pe = 0xe39,    .sdiv = 0x2,    .nsdiv = 1 },   /* 135.000 MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x2,    .nsdiv = 1 },   /* 148.352 MHz */
>> +     { .mdiv = 0x0f, .pe = 0x3426,   .sdiv = 0x0,    .nsdiv = 0 },   /* 148.500 MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x1,    .nsdiv = 1 },   /* 296.704 MHz */
>> +     { .mdiv = 0x03, .pe = 0x471c,   .sdiv = 0x1,    .nsdiv = 1 },   /* 297     MHz */
>> +     { .mdiv = 0x1c, .pe = 0x0,      .sdiv = 0x0,    .nsdiv = 1 },   /* 352     Mhz */
>>  };
>
> These lookup tables should be 'static const'
>

Done
Thanks Peter

> Once fixed:
>  Acked-by: Peter Griffin <peter.griffin@linaro.org>
>
> Regards,
>
> Peter.

[STLinux Kernel] [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65

[Gabriel Fernandez]

On 5 June 2014 13:13, Peter Griffin <peter.griffin@linaro.org> wrote:
> Hi Gabi,
>
> See my comment below
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> This patch extend the range of possible frequencies of the fs432c65
>> and fs660c32 Quad frequency synthesizers.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> ---
>>  drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
>>  1 file changed, 57 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
>> index d7a0341..97a422f 100644
>> --- a/drivers/clk/st/clkgen-fsyn.c
>> +++ b/drivers/clk/st/clkgen-fsyn.c
>> @@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
>>  };
>>
>>  static struct stm_fs fs432c65_rtbl[] = {
>> -     { .mdiv = 0x1f, .pe = 0x0,      .sdiv = 0x7,    .nsdiv = 0 },   /* 625   Khz */
>> -     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108   MHz */
>> -     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297   MHz */
>> +     { .mdiv = 0x1f, .pe = 0x0,      .sdiv = 0x7,    .nsdiv = 0 },   /* 625     Khz */
>> +     { .mdiv = 0x13, .pe = 0x777c,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.175  MHz */
>> +     { .mdiv = 0x19, .pe = 0x4d35,   .sdiv = 0x2,    .nsdiv = 0 },   /* 25.200  MHz */
>> +     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x4,    .nsdiv = 1 },   /* 27.000  MHz */
>> +     { .mdiv = 0x17, .pe = 0x28f5,   .sdiv = 0x2,    .nsdiv = 0 },   /* 27.027  MHz */
>> +     { .mdiv = 0x16, .pe = 0x3359,   .sdiv = 0x2,    .nsdiv = 0 },   /* 28.320  MHz */
>> +     { .mdiv = 0x1f, .pe = 0x2083,   .sdiv = 0x3,    .nsdiv = 1 },   /* 30.240  MHz */
>> +     { .mdiv = 0x1e, .pe = 0x430d,   .sdiv = 0x3,    .nsdiv = 1 },   /* 31.500  MHz */
>> +     { .mdiv = 0x17, .pe = 0x0,      .sdiv = 0x3,    .nsdiv = 1 },   /* 40.000  MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x1,    .nsdiv = 0 },   /* 49.500  MHz */
>> +     { .mdiv = 0x13, .pe = 0x6667,   .sdiv = 0x3,    .nsdiv = 1 },   /* 50.000  MHz */
>> +     { .mdiv = 0x10, .pe = 0x1ee6,   .sdiv = 0x3,    .nsdiv = 1 },   /* 57.284  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x3b14,   .sdiv = 0x2,    .nsdiv = 1 },   /* 65.000  MHz */
>> +     { .mdiv = 0x12, .pe = 0x7c65,   .sdiv = 0x1,    .nsdiv = 0 },   /* 71.000  MHz */
>> +     { .mdiv = 0x19, .pe = 0xecd,    .sdiv = 0x2,    .nsdiv = 1 },   /* 74.176  MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x2,    .nsdiv = 1 },   /* 74.250  MHz */
>> +     { .mdiv = 0x19, .pe = 0x3334,   .sdiv = 0x2,    .nsdiv = 1 },   /* 75.000  MHz */
>> +     { .mdiv = 0x18, .pe = 0x5138,   .sdiv = 0x2,    .nsdiv = 1 },   /* 78.800  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x77d,    .sdiv = 0x0,    .nsdiv = 0 },   /* 85.500  MHz */
>> +     { .mdiv = 0x1c, .pe = 0x13d5,   .sdiv = 0x0,    .nsdiv = 0 },   /* 88.750  MHz */
>> +     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108.000 MHz */
>> +     { .mdiv = 0x17, .pe = 0x28f5,   .sdiv = 0x0,    .nsdiv = 0 },   /* 108.108 MHz */
>> +     { .mdiv = 0x10, .pe = 0x6e26,   .sdiv = 0x2,    .nsdiv = 1 },   /* 118.963 MHz */
>> +     { .mdiv = 0x15, .pe = 0x3e63,   .sdiv = 0x0,    .nsdiv = 0 },   /* 119.000 MHz */
>> +     { .mdiv = 0x1c, .pe = 0x471d,   .sdiv = 0x1,    .nsdiv = 1 },   /* 135.000 MHz */
>> +     { .mdiv = 0x19, .pe = 0xecd,    .sdiv = 0x1,    .nsdiv = 1 },   /* 148.352 MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x1,    .nsdiv = 1 },   /* 148.500 MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297     MHz */
>>  };
>>
>>  static struct stm_fs fs660c32_rtbl[] = {
>> -     { .mdiv = 0x01, .pe = 0x2aaa,   .sdiv = 0x8,    .nsdiv = 0 },   /* 600   KHz */
>> -     { .mdiv = 0x02, .pe = 0x3d33,   .sdiv = 0x0,    .nsdiv = 0 },   /* 148.5 Mhz */
>> -     { .mdiv = 0x13, .pe = 0x5bcc,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297   Mhz */
>> -     { .mdiv = 0x0e, .pe = 0x1025,   .sdiv = 0x0,    .nsdiv = 1 },   /* 333   Mhz */
>> -     { .mdiv = 0x0b, .pe = 0x715f,   .sdiv = 0x0,    .nsdiv = 1 },   /* 350   Mhz */
>> +     { .mdiv = 0x14, .pe = 0x376b,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.175  MHz */
>> +     { .mdiv = 0x14, .pe = 0x30c3,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.200  MHz */
>> +     { .mdiv = 0x10, .pe = 0x71c7,   .sdiv = 0x4,    .nsdiv = 1 },   /* 27.000  MHz */
>> +     { .mdiv = 0x00, .pe = 0x47af,   .sdiv = 0x3,    .nsdiv = 0 },   /* 27.027  MHz */
>> +     { .mdiv = 0x0e, .pe = 0x4e1a,   .sdiv = 0x4,    .nsdiv = 1 },   /* 28.320  MHz */
>> +     { .mdiv = 0x0b, .pe = 0x534d,   .sdiv = 0x4,    .nsdiv = 1 },   /* 30.240  MHz */
>> +     { .mdiv = 0x17, .pe = 0x6fbf,   .sdiv = 0x2,    .nsdiv = 0 },   /* 31.500  MHz */
>> +     { .mdiv = 0x01, .pe = 0x0,      .sdiv = 0x4,    .nsdiv = 1 },   /* 40.000  MHz */
>> +     { .mdiv = 0x15, .pe = 0x2aab,   .sdiv = 0x3,    .nsdiv = 1 },   /* 49.500  MHz */
>> +     { .mdiv = 0x14, .pe = 0x6666,   .sdiv = 0x3,    .nsdiv = 1 },   /* 50.000  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x395f,   .sdiv = 0x1,    .nsdiv = 0 },   /* 57.284  MHz */
>> +     { .mdiv = 0x08, .pe = 0x4ec5,   .sdiv = 0x3,    .nsdiv = 1 },   /* 65.000  MHz */
>> +     { .mdiv = 0x05, .pe = 0x1770,   .sdiv = 0x3,    .nsdiv = 1 },   /* 71.000  MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x3,    .nsdiv = 1 },   /* 74.176  MHz */
>> +     { .mdiv = 0x0f, .pe = 0x3426,   .sdiv = 0x1,    .nsdiv = 0 },   /* 74.250  MHz */
>> +     { .mdiv = 0x0e, .pe = 0x7777,   .sdiv = 0x1,    .nsdiv = 0 },   /* 75.000  MHz */
>> +     { .mdiv = 0x01, .pe = 0x4053,   .sdiv = 0x3,    .nsdiv = 1 },   /* 78.800  MHz */
>> +     { .mdiv = 0x09, .pe = 0x15b5,   .sdiv = 0x1,    .nsdiv = 0 },   /* 85.500  MHz */
>> +     { .mdiv = 0x1b, .pe = 0x3f19,   .sdiv = 0x2,    .nsdiv = 1 },   /* 88.750  MHz */
>> +     { .mdiv = 0x10, .pe = 0x71c7,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108.000 MHz */
>> +     { .mdiv = 0x00, .pe = 0x47af,   .sdiv = 0x1,    .nsdiv = 0 },   /* 108.108 MHz */
>> +     { .mdiv = 0x0c, .pe = 0x3118,   .sdiv = 0x2,    .nsdiv = 1 },   /* 118.963 MHz */
>> +     { .mdiv = 0x0c, .pe = 0x2f54,   .sdiv = 0x2,    .nsdiv = 1 },   /* 119.000 MHz */
>> +     { .mdiv = 0x07, .pe = 0xe39,    .sdiv = 0x2,    .nsdiv = 1 },   /* 135.000 MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x2,    .nsdiv = 1 },   /* 148.352 MHz */
>> +     { .mdiv = 0x0f, .pe = 0x3426,   .sdiv = 0x0,    .nsdiv = 0 },   /* 148.500 MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x1,    .nsdiv = 1 },   /* 296.704 MHz */
>> +     { .mdiv = 0x03, .pe = 0x471c,   .sdiv = 0x1,    .nsdiv = 1 },   /* 297     MHz */
>> +     { .mdiv = 0x1c, .pe = 0x0,      .sdiv = 0x0,    .nsdiv = 1 },   /* 352     Mhz */
>>  };
>
> These lookup tables should be 'static const'
>

Done
Thanks Peter

> Once fixed:
>  Acked-by: Peter Griffin <peter.griffin@linaro.org>
>
> Regards,
>
> Peter.

Re: [STLinux Kernel] [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65

[Gabriel Fernandez]

On 5 June 2014 13:13, Peter Griffin <peter.griffin@linaro.org> wrote:
> Hi Gabi,
>
> See my comment below
>
> On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:
>
>> This patch extend the range of possible frequencies of the fs432c65
>> and fs660c32 Quad frequency synthesizers.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> ---
>>  drivers/clk/st/clkgen-fsyn.c | 65 ++++++++++++++++++++++++++++++++++++++------
>>  1 file changed, 57 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
>> index d7a0341..97a422f 100644
>> --- a/drivers/clk/st/clkgen-fsyn.c
>> +++ b/drivers/clk/st/clkgen-fsyn.c
>> @@ -50,17 +50,66 @@ static struct stm_fs fs216c65_rtbl[] = {
>>  };
>>
>>  static struct stm_fs fs432c65_rtbl[] = {
>> -     { .mdiv = 0x1f, .pe = 0x0,      .sdiv = 0x7,    .nsdiv = 0 },   /* 625   Khz */
>> -     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108   MHz */
>> -     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297   MHz */
>> +     { .mdiv = 0x1f, .pe = 0x0,      .sdiv = 0x7,    .nsdiv = 0 },   /* 625     Khz */
>> +     { .mdiv = 0x13, .pe = 0x777c,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.175  MHz */
>> +     { .mdiv = 0x19, .pe = 0x4d35,   .sdiv = 0x2,    .nsdiv = 0 },   /* 25.200  MHz */
>> +     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x4,    .nsdiv = 1 },   /* 27.000  MHz */
>> +     { .mdiv = 0x17, .pe = 0x28f5,   .sdiv = 0x2,    .nsdiv = 0 },   /* 27.027  MHz */
>> +     { .mdiv = 0x16, .pe = 0x3359,   .sdiv = 0x2,    .nsdiv = 0 },   /* 28.320  MHz */
>> +     { .mdiv = 0x1f, .pe = 0x2083,   .sdiv = 0x3,    .nsdiv = 1 },   /* 30.240  MHz */
>> +     { .mdiv = 0x1e, .pe = 0x430d,   .sdiv = 0x3,    .nsdiv = 1 },   /* 31.500  MHz */
>> +     { .mdiv = 0x17, .pe = 0x0,      .sdiv = 0x3,    .nsdiv = 1 },   /* 40.000  MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x1,    .nsdiv = 0 },   /* 49.500  MHz */
>> +     { .mdiv = 0x13, .pe = 0x6667,   .sdiv = 0x3,    .nsdiv = 1 },   /* 50.000  MHz */
>> +     { .mdiv = 0x10, .pe = 0x1ee6,   .sdiv = 0x3,    .nsdiv = 1 },   /* 57.284  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x3b14,   .sdiv = 0x2,    .nsdiv = 1 },   /* 65.000  MHz */
>> +     { .mdiv = 0x12, .pe = 0x7c65,   .sdiv = 0x1,    .nsdiv = 0 },   /* 71.000  MHz */
>> +     { .mdiv = 0x19, .pe = 0xecd,    .sdiv = 0x2,    .nsdiv = 1 },   /* 74.176  MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x2,    .nsdiv = 1 },   /* 74.250  MHz */
>> +     { .mdiv = 0x19, .pe = 0x3334,   .sdiv = 0x2,    .nsdiv = 1 },   /* 75.000  MHz */
>> +     { .mdiv = 0x18, .pe = 0x5138,   .sdiv = 0x2,    .nsdiv = 1 },   /* 78.800  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x77d,    .sdiv = 0x0,    .nsdiv = 0 },   /* 85.500  MHz */
>> +     { .mdiv = 0x1c, .pe = 0x13d5,   .sdiv = 0x0,    .nsdiv = 0 },   /* 88.750  MHz */
>> +     { .mdiv = 0x11, .pe = 0x1c72,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108.000 MHz */
>> +     { .mdiv = 0x17, .pe = 0x28f5,   .sdiv = 0x0,    .nsdiv = 0 },   /* 108.108 MHz */
>> +     { .mdiv = 0x10, .pe = 0x6e26,   .sdiv = 0x2,    .nsdiv = 1 },   /* 118.963 MHz */
>> +     { .mdiv = 0x15, .pe = 0x3e63,   .sdiv = 0x0,    .nsdiv = 0 },   /* 119.000 MHz */
>> +     { .mdiv = 0x1c, .pe = 0x471d,   .sdiv = 0x1,    .nsdiv = 1 },   /* 135.000 MHz */
>> +     { .mdiv = 0x19, .pe = 0xecd,    .sdiv = 0x1,    .nsdiv = 1 },   /* 148.352 MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x1,    .nsdiv = 1 },   /* 148.500 MHz */
>> +     { .mdiv = 0x19, .pe = 0x121a,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297     MHz */
>>  };
>>
>>  static struct stm_fs fs660c32_rtbl[] = {
>> -     { .mdiv = 0x01, .pe = 0x2aaa,   .sdiv = 0x8,    .nsdiv = 0 },   /* 600   KHz */
>> -     { .mdiv = 0x02, .pe = 0x3d33,   .sdiv = 0x0,    .nsdiv = 0 },   /* 148.5 Mhz */
>> -     { .mdiv = 0x13, .pe = 0x5bcc,   .sdiv = 0x0,    .nsdiv = 1 },   /* 297   Mhz */
>> -     { .mdiv = 0x0e, .pe = 0x1025,   .sdiv = 0x0,    .nsdiv = 1 },   /* 333   Mhz */
>> -     { .mdiv = 0x0b, .pe = 0x715f,   .sdiv = 0x0,    .nsdiv = 1 },   /* 350   Mhz */
>> +     { .mdiv = 0x14, .pe = 0x376b,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.175  MHz */
>> +     { .mdiv = 0x14, .pe = 0x30c3,   .sdiv = 0x4,    .nsdiv = 1 },   /* 25.200  MHz */
>> +     { .mdiv = 0x10, .pe = 0x71c7,   .sdiv = 0x4,    .nsdiv = 1 },   /* 27.000  MHz */
>> +     { .mdiv = 0x00, .pe = 0x47af,   .sdiv = 0x3,    .nsdiv = 0 },   /* 27.027  MHz */
>> +     { .mdiv = 0x0e, .pe = 0x4e1a,   .sdiv = 0x4,    .nsdiv = 1 },   /* 28.320  MHz */
>> +     { .mdiv = 0x0b, .pe = 0x534d,   .sdiv = 0x4,    .nsdiv = 1 },   /* 30.240  MHz */
>> +     { .mdiv = 0x17, .pe = 0x6fbf,   .sdiv = 0x2,    .nsdiv = 0 },   /* 31.500  MHz */
>> +     { .mdiv = 0x01, .pe = 0x0,      .sdiv = 0x4,    .nsdiv = 1 },   /* 40.000  MHz */
>> +     { .mdiv = 0x15, .pe = 0x2aab,   .sdiv = 0x3,    .nsdiv = 1 },   /* 49.500  MHz */
>> +     { .mdiv = 0x14, .pe = 0x6666,   .sdiv = 0x3,    .nsdiv = 1 },   /* 50.000  MHz */
>> +     { .mdiv = 0x1d, .pe = 0x395f,   .sdiv = 0x1,    .nsdiv = 0 },   /* 57.284  MHz */
>> +     { .mdiv = 0x08, .pe = 0x4ec5,   .sdiv = 0x3,    .nsdiv = 1 },   /* 65.000  MHz */
>> +     { .mdiv = 0x05, .pe = 0x1770,   .sdiv = 0x3,    .nsdiv = 1 },   /* 71.000  MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x3,    .nsdiv = 1 },   /* 74.176  MHz */
>> +     { .mdiv = 0x0f, .pe = 0x3426,   .sdiv = 0x1,    .nsdiv = 0 },   /* 74.250  MHz */
>> +     { .mdiv = 0x0e, .pe = 0x7777,   .sdiv = 0x1,    .nsdiv = 0 },   /* 75.000  MHz */
>> +     { .mdiv = 0x01, .pe = 0x4053,   .sdiv = 0x3,    .nsdiv = 1 },   /* 78.800  MHz */
>> +     { .mdiv = 0x09, .pe = 0x15b5,   .sdiv = 0x1,    .nsdiv = 0 },   /* 85.500  MHz */
>> +     { .mdiv = 0x1b, .pe = 0x3f19,   .sdiv = 0x2,    .nsdiv = 1 },   /* 88.750  MHz */
>> +     { .mdiv = 0x10, .pe = 0x71c7,   .sdiv = 0x2,    .nsdiv = 1 },   /* 108.000 MHz */
>> +     { .mdiv = 0x00, .pe = 0x47af,   .sdiv = 0x1,    .nsdiv = 0 },   /* 108.108 MHz */
>> +     { .mdiv = 0x0c, .pe = 0x3118,   .sdiv = 0x2,    .nsdiv = 1 },   /* 118.963 MHz */
>> +     { .mdiv = 0x0c, .pe = 0x2f54,   .sdiv = 0x2,    .nsdiv = 1 },   /* 119.000 MHz */
>> +     { .mdiv = 0x07, .pe = 0xe39,    .sdiv = 0x2,    .nsdiv = 1 },   /* 135.000 MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x2,    .nsdiv = 1 },   /* 148.352 MHz */
>> +     { .mdiv = 0x0f, .pe = 0x3426,   .sdiv = 0x0,    .nsdiv = 0 },   /* 148.500 MHz */
>> +     { .mdiv = 0x03, .pe = 0x4ba7,   .sdiv = 0x1,    .nsdiv = 1 },   /* 296.704 MHz */
>> +     { .mdiv = 0x03, .pe = 0x471c,   .sdiv = 0x1,    .nsdiv = 1 },   /* 297     MHz */
>> +     { .mdiv = 0x1c, .pe = 0x0,      .sdiv = 0x0,    .nsdiv = 1 },   /* 352     Mhz */
>>  };
>
> These lookup tables should be 'static const'
>

Done
Thanks Peter

> Once fixed:
>  Acked-by: Peter Griffin <peter.griffin@linaro.org>
>
> Regards,
>
> Peter.

[PATCH RESEND 12/12] drivers: clk: st: Use round to closest divider flag

[Gabriel FERNANDEZ]

This patch uses CLK_DIVIDER_ROUND_CLOSEST flag to specify
the divider has to round to closest div.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-mux.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index 9bdedc8..79dc40b 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -774,7 +774,8 @@ void __init st_of_clkgen_vcc_setup(struct device_node *np)
 		div->reg = reg + VCC_DIV_OFFSET;
 		div->shift = 2 * i;
 		div->width = 2;
-		div->flags = CLK_DIVIDER_POWER_OF_TWO;
+		div->flags = CLK_DIVIDER_POWER_OF_TWO |
+			CLK_DIVIDER_ROUND_CLOSEST;
 
 		mux->reg = reg + VCC_MUX_OFFSET;
 		mux->shift = 2 * i;
-- 
1.9.1

[PATCH RESEND 12/12] drivers: clk: st: Use round to closest divider flag

[Gabriel FERNANDEZ]

This patch uses CLK_DIVIDER_ROUND_CLOSEST flag to specify
the divider has to round to closest div.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-mux.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index 9bdedc8..79dc40b 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -774,7 +774,8 @@ void __init st_of_clkgen_vcc_setup(struct device_node *np)
 		div->reg = reg + VCC_DIV_OFFSET;
 		div->shift = 2 * i;
 		div->width = 2;
-		div->flags = CLK_DIVIDER_POWER_OF_TWO;
+		div->flags = CLK_DIVIDER_POWER_OF_TWO |
+			CLK_DIVIDER_ROUND_CLOSEST;
 
 		mux->reg = reg + VCC_MUX_OFFSET;
 		mux->shift = 2 * i;
-- 
1.9.1

[PATCH RESEND 12/12] drivers: clk: st: Use round to closest divider flag

[Gabriel FERNANDEZ]

This patch uses CLK_DIVIDER_ROUND_CLOSEST flag to specify
the divider has to round to closest div.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-mux.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index 9bdedc8..79dc40b 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -774,7 +774,8 @@ void __init st_of_clkgen_vcc_setup(struct device_node *np)
 		div->reg = reg + VCC_DIV_OFFSET;
 		div->shift = 2 * i;
 		div->width = 2;
-		div->flags = CLK_DIVIDER_POWER_OF_TWO;
+		div->flags = CLK_DIVIDER_POWER_OF_TWO |
+			CLK_DIVIDER_ROUND_CLOSEST;
 
 		mux->reg = reg + VCC_MUX_OFFSET;
 		mux->shift = 2 * i;
-- 
1.9.1

Re: [STLinux Kernel] [PATCH RESEND 12/12] drivers: clk: st: Use round to closest divider flag

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch uses CLK_DIVIDER_ROUND_CLOSEST flag to specify
> the divider has to round to closest div.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  drivers/clk/st/clkgen-mux.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter

[STLinux Kernel] [PATCH RESEND 12/12] drivers: clk: st: Use round to closest divider flag

[Peter Griffin]

On Wed, 04 Jun 2014, Gabriel FERNANDEZ wrote:

> This patch uses CLK_DIVIDER_ROUND_CLOSEST flag to specify
> the divider has to round to closest div.
> 
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
>  drivers/clk/st/clkgen-mux.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Acked-by: Peter Griffin <peter.griffin@linaro.org>

Regards,

Peter