* [PATCH 3.4 00/88] 3.4.93-stable review
@ 2014-06-10 0:24 Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 01/88] sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check Greg Kroah-Hartman
` (87 more replies)
0 siblings, 88 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, satoru.takeuchi,
shuah.kh, stable
This is the start of the stable review cycle for the 3.4.93 release.
There are 88 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu Jun 12 00:24:06 UTC 2014.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.93-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 3.4.93-rc1
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID.
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.
zhenzhong.duan <zhenzhong.duan@oracle.com>
xen: populate correct number of pages when across mem boundary (v2)
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/balloon: Subtract from xen_released_pages the count that is populated.
David Vrabel <dvrabel@cantab.net>
xen/setup: update VA mapping when releasing memory during setup
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/setup: Combine the two hypercall functions - since they are quite similar.
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/p2m: An early bootup variant of set_phys_to_machine
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/p2m: Collapse early_alloc_p2m_middle redundant checks.
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on argument
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen/p2m: Move code around to allow for better re-usage.
Ley Foon Tan <lftan@altera.com>
tty/serial: Add support for Altera serial port
Stephen Hurd <shurd@broadcom.com>
8250/16?50: Add support for Broadcom TruManage redirected serial port
Scott Ashcroft <scott.ashcroft@talk21.com>
Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards
Ilya Zykov <ilya@ilyx.ru>
tty: Correct tty buffer flush.
Johan Hovold <jhovold@gmail.com>
serial: pch_uart: fix tty-kref leak in rx-error path
Johan Hovold <jhovold@gmail.com>
serial: pch_uart: fix tty-kref leak in dma-rx path
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping
Hannes Reinecke <hare@suse.de>
target: use correct sense code for LUN communication failure
Nicholas Bellinger <nab@linux-iscsi.org>
target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
Wei Yongjun <yongjun_wei@trendmicro.com.cn>
target/pscsi: fix return value check
Roland Dreier <roland@purestorage.com>
iscsi-target: Always send a response before terminating iSCSI connection
Mike Miller <mike.miller@hp.com>
hpsa: gen8plus Smart Array IDs
Reddy, Sreekanth <Sreekanth.Reddy@lsi.com>
mpt2sas: Fix for issue Missing delay not getting set during system bootup
Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop
Jeff Skirvin <jeffrey.d.skirvin@intel.com>
isci: Fix a race condition in the SSP task management path
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: check passed socket's net matches NFSd superblock's one
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: containerize NFSd filesystem
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: pass proper net to nfsd_destroy() from NFSd kthreads
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: pass net to __write_ports() and down
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: pass net to nfsd_set_nrthreads()
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: pass net to nfsd_svc()
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: pass net to nfsd_create_serv()
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: pass net to nfsd_startup() and nfsd_shutdown()
Stanislav Kinsbursky <skinsbursky@parallels.com>
nfsd: pass net to nfsd_init_socks()
Amit Shah <amit.shah@redhat.com>
virtio: console: add locking around c_ovq operations
Amit Shah <amit.shah@redhat.com>
virtio: console: rename cvq_lock to c_ivq_lock
Michael S. Tsirkin <mst@redhat.com>
virtio_console: fix uapi header
Alexander Graf <agraf@suse.de>
virtio-blk: Don't free ida when disk is in use
Will Deacon <will.deacon@arm.com>
virtio: 9p: correctly pass physical address to userspace for high pages
Will Deacon <will.deacon@arm.com>
mm: highmem: export kmap_to_page for modules
Ben Hutchings <ben@decadent.org.uk>
mm: add kmap_to_page()
Asias He <asias@redhat.com>
virtio-blk: Reset device after blk_cleanup_queue()
Asias He <asias@redhat.com>
virtio-blk: Call del_gendisk() before disable guest kick
Asias He <asias@redhat.com>
virtio-blk: Fix hot-unplug race in remove method
Asias He <asias@redhat.com>
virtio_blk: Drop unused request tracking list
Raphael Kubo da Costa <rakuco@FreeBSD.org>
Bluetooth: Add support for BCM20702A0 [0b05, 17cb]
Peng Chen <pengchen@qti.qualcomm.com>
Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012.
AceLan Kao <acelan.kao@canonical.com>
Bluetooth: Add support for Atheros [0cf3:e003]
AceLan Kao <acelan.kao@canonical.com>
Bluetooth: Add support for Atheros [0cf3:3121]
Sujith Manoharan <sujith@msujith.org>
Bluetooth: ath3k: Add support for ID 0x13d3/0x3402
Thomas Loo <tloo@saltstorm.net>
Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330]
Cho, Yu-Chen <acho@suse.com>
Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f]
Noguchi Kazutosi <linux@scaltinof.net>
Bluetooth: Add support for Foxconn/Hon Hai [0489:e04d]
Sunguk Lee <d3m3vilurr@gmail.com>
Bluetooth: Device 0cf3:3008 should map AR 3012
Josh Boyer <jwboyer@redhat.com>
Bluetooth: Add support for atheros 04ca:3004 device to ath3k
Sergio Cambra <sergio@programatica.es>
Bluetooth device 04ca:3008 should use ath3k
AceLan Kao <acelan.kao@canonical.com>
Bluetooth: Add support for Foxconn / Hon Hai [0489:e056]
AceLan Kao <acelan.kao@canonical.com>
Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e]
Daniel Schaal <farbing@web.de>
Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.
AceLan Kao <acelan.kao@canonical.com>
Bluetooth: Add support for IMC Networks [13d3:3393]
Jeff Cook <jeff@deserettechnology.com>
Bluetooth: Add support for BCM20702A0 [0b05, 17b5]
Jaroslav Resler <resler@cs.cas.cz>
Bluetooth: Add support for BCM20702A0 [04ca, 2003]
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Bluetooth: Add USB_VENDOR_AND_INTERFACE_INFO() for Broadcom/Foxconn
Yevgeniy Melnichuk <yevgeniy.melnichuk@googlemail.com>
Bluetooth: Add support for Sony Vaio T-Series
Michael Gruetzner <mgruetzn@gmx.de>
Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
Peng Chen <pengchen@qca.qualcomm.com>
Bluetooth: add support for atheros 0489:e057
Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
Bluetooth: add support for atheros 0930:0219
Marek Vasut <marex@denx.de>
Bluetooth: Support AR3011 in Acer Iconia Tab W500
Jaganath Kanakkassery <jaganath.k@samsung.com>
Bluetooth: Fix invalid length check in l2cap_information_rsp()
Johan Hedberg <johan.hedberg@intel.com>
Bluetooth: Fix missing length checks for L2CAP signalling PDUs
Andrey Ryabinin <a.ryabinin@samsung.com>
mm: rmap: fix use-after-free in __put_anon_vma
Alan Stern <stern@rowland.harvard.edu>
USB: Avoid runtime suspend loops for HCDs that can't handle suspend/resume
Johan Hovold <jhovold@gmail.com>
USB: io_ti: fix firmware download on big-endian machines (part 2)
Alexej Starschenko <starschenko@gmail.com>
USB: serial: option: add support for Novatel E371 PCIe card
George McCollister <george.mccollister@gmail.com>
USB: ftdi_sio: add NovaTech OrionLXm product ID
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
Ronan Marquet <ronan.marquet@orange.fr>
ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
Ben Hutchings <ben@decadent.org.uk>
Staging: speakup: Move pasting into a work item
Mathias Nyman <mathias.nyman@linux.intel.com>
xhci: delete endpoints from bandwidth list before freeing whole device
NeilBrown <neilb@suse.de>
md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync".
Lai Jiangshan <laijs@cn.fujitsu.com>
sched: Fix hotplug vs. set_cpus_allowed_ptr()
Andrey Ryabinin <a.ryabinin@samsung.com>
ARM: 8051/1: put_user: fix possible data corruption in put_user
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
mm/memory-failure.c: fix memory leak by race between poison and unpoison
Peter Zijlstra <peterz@infradead.org>
perf: Fix race in removing an event
Peter Zijlstra <peterz@infradead.org>
perf: Limit perf_event_attr::sample_period to 63 bits
Jiri Olsa <jolsa@redhat.com>
perf: Prevent false warning in perf_swevent_add
Steven Rostedt (Red Hat) <rostedt@goodmis.org>
sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check
-------------
Diffstat:
.../devicetree/bindings/tty/serial/of-serial.txt | 3 +
Makefile | 4 +-
arch/arm/include/asm/uaccess.h | 3 +-
arch/x86/include/asm/xen/page.h | 1 +
arch/x86/xen/enlighten.c | 1 -
arch/x86/xen/mmu.c | 23 ---
arch/x86/xen/p2m.c | 198 ++++++++++++++++-----
arch/x86/xen/setup.c | 159 ++++++++++++++---
arch/x86/xen/xen-ops.h | 1 -
drivers/block/virtio_blk.c | 20 +--
drivers/bluetooth/ath3k.c | 39 ++++
drivers/bluetooth/btusb.c | 28 ++-
drivers/char/virtio_console.c | 22 ++-
drivers/md/md.c | 4 +-
drivers/scsi/hpsa.c | 32 +++-
drivers/scsi/isci/task.c | 9 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 13 +-
drivers/scsi/mpt2sas/mpt2sas_base.h | 3 +
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 126 ++++++++++++-
drivers/staging/speakup/main.c | 1 +
drivers/staging/speakup/selection.c | 38 +++-
drivers/staging/speakup/speakup.h | 1 +
drivers/target/iscsi/iscsi_target_login.c | 8 +-
drivers/target/iscsi/iscsi_target_nego.c | 10 +-
drivers/target/target_core_alua.c | 6 +-
drivers/target/target_core_file.c | 9 +-
drivers/target/target_core_pscsi.c | 8 +-
drivers/target/target_core_transport.c | 5 +-
drivers/tty/serial/8250/8250.c | 36 +++-
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_pci.c | 55 ++++--
drivers/tty/serial/of_serial.c | 6 +
drivers/tty/serial/pch_uart.c | 5 +-
drivers/tty/tty_buffer.c | 11 +-
drivers/usb/core/driver.c | 9 +-
drivers/usb/core/hub.c | 15 +-
drivers/usb/host/xhci-mem.c | 20 +--
drivers/usb/serial/ftdi_sio.c | 2 +
drivers/usb/serial/ftdi_sio_ids.h | 5 +
drivers/usb/serial/io_ti.c | 2 +-
drivers/usb/serial/io_usbvend.h | 2 +-
drivers/usb/serial/option.c | 2 +
fs/nfsd/nfsctl.c | 62 +++++--
fs/nfsd/nfsd.h | 6 +-
fs/nfsd/nfssvc.c | 41 +++--
include/linux/highmem.h | 7 +
include/linux/pci_ids.h | 1 +
include/linux/serial_core.h | 6 +-
include/linux/sunrpc/svcsock.h | 1 +
include/linux/virtio_console.h | 2 +-
kernel/cpu.c | 6 +-
kernel/events/core.c | 61 ++++---
kernel/sched/core.c | 1 -
kernel/sched/cpupri.c | 3 +-
mm/highmem.c | 13 ++
mm/memory-failure.c | 2 +
mm/rmap.c | 3 +-
net/9p/trans_virtio.c | 3 +-
net/bluetooth/l2cap_core.c | 94 +++++++---
net/sunrpc/svcsock.c | 16 ++
sound/pci/hda/patch_realtek.c | 10 +-
61 files changed, 983 insertions(+), 301 deletions(-)
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 01/88] sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 02/88] perf: Prevent false warning in perf_swevent_add Greg Kroah-Hartman
` (86 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Galbraith, Steven Rostedt,
Peter Zijlstra, Ingo Molnar
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
commit 6227cb00cc120f9a43ce8313bb0475ddabcb7d01 upstream.
The check at the beginning of cpupri_find() makes sure that the task_pri
variable does not exceed the cp->pri_to_cpu array length. But that length
is CPUPRI_NR_PRIORITIES not MAX_RT_PRIO, where it will miss the last two
priorities in that array.
As task_pri is computed from convert_prio() which should never be bigger
than CPUPRI_NR_PRIORITIES, if the check should cause a panic if it is
hit.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1397015410.5212.13.camel@marge.simpson.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/cpupri.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/kernel/sched/cpupri.c
+++ b/kernel/sched/cpupri.c
@@ -68,8 +68,7 @@ int cpupri_find(struct cpupri *cp, struc
int idx = 0;
int task_pri = convert_prio(p->prio);
- if (task_pri >= MAX_RT_PRIO)
- return 0;
+ BUG_ON(task_pri >= CPUPRI_NR_PRIORITIES);
for (idx = 0; idx < task_pri; idx++) {
struct cpupri_vec *vec = &cp->pri_to_cpu[idx];
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 02/88] perf: Prevent false warning in perf_swevent_add
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 01/88] sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 03/88] perf: Limit perf_event_attr::sample_period to 63 bits Greg Kroah-Hartman
` (85 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Corey Ashford, Frederic Weisbecker,
Ingo Molnar, Paul Mackerras, Arnaldo Carvalho de Melo,
Fengguang Wu, Jiri Olsa, Peter Zijlstra, Thomas Gleixner
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <jolsa@redhat.com>
commit 39af6b1678afa5880dda7e375cf3f9d395087f6d upstream.
The perf cpu offline callback takes down all cpu context
events and releases swhash->swevent_hlist.
This could race with task context software event being just
scheduled on this cpu via perf_swevent_add while cpu hotplug
code already cleaned up event's data.
The race happens in the gap between the cpu notifier code
and the cpu being actually taken down. Note that only cpu
ctx events are terminated in the perf cpu hotplug code.
It's easily reproduced with:
$ perf record -e faults perf bench sched pipe
while putting one of the cpus offline:
# echo 0 > /sys/devices/system/cpu/cpu1/online
Console emits following warning:
WARNING: CPU: 1 PID: 2845 at kernel/events/core.c:5672 perf_swevent_add+0x18d/0x1a0()
Modules linked in:
CPU: 1 PID: 2845 Comm: sched-pipe Tainted: G W 3.14.0+ #256
Hardware name: Intel Corporation Montevina platform/To be filled by O.E.M., BIOS AMVACRB1.86C.0066.B00.0805070703 05/07/2008
0000000000000009 ffff880077233ab8 ffffffff81665a23 0000000000200005
0000000000000000 ffff880077233af8 ffffffff8104732c 0000000000000046
ffff88007467c800 0000000000000002 ffff88007a9cf2a0 0000000000000001
Call Trace:
[<ffffffff81665a23>] dump_stack+0x4f/0x7c
[<ffffffff8104732c>] warn_slowpath_common+0x8c/0xc0
[<ffffffff8104737a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8110fb3d>] perf_swevent_add+0x18d/0x1a0
[<ffffffff811162ae>] event_sched_in.isra.75+0x9e/0x1f0
[<ffffffff8111646a>] group_sched_in+0x6a/0x1f0
[<ffffffff81083dd5>] ? sched_clock_local+0x25/0xa0
[<ffffffff811167e6>] ctx_sched_in+0x1f6/0x450
[<ffffffff8111757b>] perf_event_sched_in+0x6b/0xa0
[<ffffffff81117a4b>] perf_event_context_sched_in+0x7b/0xc0
[<ffffffff81117ece>] __perf_event_task_sched_in+0x43e/0x460
[<ffffffff81096f1e>] ? put_lock_stats.isra.18+0xe/0x30
[<ffffffff8107b3c8>] finish_task_switch+0xb8/0x100
[<ffffffff8166a7de>] __schedule+0x30e/0xad0
[<ffffffff81172dd2>] ? pipe_read+0x3e2/0x560
[<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
[<ffffffff8166b45e>] ? preempt_schedule_irq+0x3e/0x70
[<ffffffff8166b464>] preempt_schedule_irq+0x44/0x70
[<ffffffff816707f0>] retint_kernel+0x20/0x30
[<ffffffff8109e60a>] ? lockdep_sys_exit+0x1a/0x90
[<ffffffff812a4234>] lockdep_sys_exit_thunk+0x35/0x67
[<ffffffff81679321>] ? sysret_check+0x5/0x56
Fixing this by tracking the cpu hotplug state and displaying
the WARN only if current cpu is initialized properly.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1396861448-10097-1-git-send-email-jolsa@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/events/core.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4854,6 +4854,9 @@ struct swevent_htable {
/* Recursion avoidance in each contexts */
int recursion[PERF_NR_CONTEXTS];
+
+ /* Keeps track of cpu being initialized/exited */
+ bool online;
};
static DEFINE_PER_CPU(struct swevent_htable, swevent_htable);
@@ -5101,8 +5104,14 @@ static int perf_swevent_add(struct perf_
hwc->state = !(flags & PERF_EF_START);
head = find_swevent_head(swhash, event);
- if (WARN_ON_ONCE(!head))
+ if (!head) {
+ /*
+ * We can race with cpu hotplug code. Do not
+ * WARN if the cpu just got unplugged.
+ */
+ WARN_ON_ONCE(swhash->online);
return -EINVAL;
+ }
hlist_add_head_rcu(&event->hlist_entry, head);
@@ -7124,6 +7133,7 @@ static void __cpuinit perf_event_init_cp
struct swevent_htable *swhash = &per_cpu(swevent_htable, cpu);
mutex_lock(&swhash->hlist_mutex);
+ swhash->online = true;
if (swhash->hlist_refcount > 0) {
struct swevent_hlist *hlist;
@@ -7181,6 +7191,7 @@ static void perf_event_exit_cpu(int cpu)
perf_event_exit_cpu_context(cpu);
mutex_lock(&swhash->hlist_mutex);
+ swhash->online = false;
swevent_hlist_release(swhash);
mutex_unlock(&swhash->hlist_mutex);
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 03/88] perf: Limit perf_event_attr::sample_period to 63 bits
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 01/88] sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 02/88] perf: Prevent false warning in perf_swevent_add Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 04/88] perf: Fix race in removing an event Greg Kroah-Hartman
` (84 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vince Weaver, Peter Zijlstra,
Thomas Gleixner
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
commit 0819b2e30ccb93edf04876237b6205eef84ec8d2 upstream.
Vince reported that using a large sample_period (one with bit 63 set)
results in wreckage since while the sample_period is fundamentally
unsigned (negative periods don't make sense) the way we implement
things very much rely on signed logic.
So limit sample_period to 63 bits to avoid tripping over this.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-p25fhunibl4y3qi0zuqmyf4b@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/events/core.c | 3 +++
1 file changed, 3 insertions(+)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6356,6 +6356,9 @@ SYSCALL_DEFINE5(perf_event_open,
if (attr.freq) {
if (attr.sample_freq > sysctl_perf_event_sample_rate)
return -EINVAL;
+ } else {
+ if (attr.sample_period & (1ULL << 63))
+ return -EINVAL;
}
/*
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 04/88] perf: Fix race in removing an event
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 03/88] perf: Limit perf_event_attr::sample_period to 63 bits Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 05/88] mm/memory-failure.c: fix memory leak by race between poison and unpoison Greg Kroah-Hartman
` (83 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vince Weaver,
Arnaldo Carvalho de Melo, Linus Torvalds, Peter Zijlstra,
Ingo Molnar
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
commit 46ce0fe97a6be7532ce6126bb26ce89fed81528c upstream.
When removing a (sibling) event we do:
raw_spin_lock_irq(&ctx->lock);
perf_group_detach(event);
raw_spin_unlock_irq(&ctx->lock);
<hole>
perf_remove_from_context(event);
raw_spin_lock_irq(&ctx->lock);
...
raw_spin_unlock_irq(&ctx->lock);
Now, assuming the event is a sibling, it will be 'unreachable' for
things like ctx_sched_out() because that iterates the
groups->siblings, and we just unhooked the sibling.
So, if during <hole> we get ctx_sched_out(), it will miss the event
and not call event_sched_out() on it, leaving it programmed on the
PMU.
The subsequent perf_remove_from_context() call will find the ctx is
inactive and only call list_del_event() to remove the event from all
other lists.
Hereafter we can proceed to free the event; while still programmed!
Close this hole by moving perf_group_detach() inside the same
ctx->lock region(s) perf_remove_from_context() has.
The condition on inherited events only in __perf_event_exit_task() is
likely complete crap because non-inherited events are part of groups
too and we're tearing down just the same. But leave that for another
patch.
Most-likely-Fixes: e03a9a55b4e ("perf: Change close() semantics for group events")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Much-staring-at-traces-by: Vince Weaver <vincent.weaver@maine.edu>
Much-staring-at-traces-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140505093124.GN17778@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/events/core.c | 45 +++++++++++++++++++++++++--------------------
1 file changed, 25 insertions(+), 20 deletions(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1196,6 +1196,11 @@ group_sched_out(struct perf_event *group
cpuctx->exclusive = 0;
}
+struct remove_event {
+ struct perf_event *event;
+ bool detach_group;
+};
+
/*
* Cross CPU call to remove a performance event
*
@@ -1204,12 +1209,15 @@ group_sched_out(struct perf_event *group
*/
static int __perf_remove_from_context(void *info)
{
- struct perf_event *event = info;
+ struct remove_event *re = info;
+ struct perf_event *event = re->event;
struct perf_event_context *ctx = event->ctx;
struct perf_cpu_context *cpuctx = __get_cpu_context(ctx);
raw_spin_lock(&ctx->lock);
event_sched_out(event, cpuctx, ctx);
+ if (re->detach_group)
+ perf_group_detach(event);
list_del_event(event, ctx);
if (!ctx->nr_events && cpuctx->task_ctx == ctx) {
ctx->is_active = 0;
@@ -1234,10 +1242,14 @@ static int __perf_remove_from_context(vo
* When called from perf_event_exit_task, it's OK because the
* context has been detached from its task.
*/
-static void perf_remove_from_context(struct perf_event *event)
+static void perf_remove_from_context(struct perf_event *event, bool detach_group)
{
struct perf_event_context *ctx = event->ctx;
struct task_struct *task = ctx->task;
+ struct remove_event re = {
+ .event = event,
+ .detach_group = detach_group,
+ };
lockdep_assert_held(&ctx->mutex);
@@ -1246,12 +1258,12 @@ static void perf_remove_from_context(str
* Per cpu events are removed via an smp call and
* the removal is always successful.
*/
- cpu_function_call(event->cpu, __perf_remove_from_context, event);
+ cpu_function_call(event->cpu, __perf_remove_from_context, &re);
return;
}
retry:
- if (!task_function_call(task, __perf_remove_from_context, event))
+ if (!task_function_call(task, __perf_remove_from_context, &re))
return;
raw_spin_lock_irq(&ctx->lock);
@@ -1268,6 +1280,8 @@ retry:
* Since the task isn't running, its safe to remove the event, us
* holding the ctx->lock ensures the task won't get scheduled in.
*/
+ if (detach_group)
+ perf_group_detach(event);
list_del_event(event, ctx);
raw_spin_unlock_irq(&ctx->lock);
}
@@ -2962,10 +2976,7 @@ int perf_event_release_kernel(struct per
* to trigger the AB-BA case.
*/
mutex_lock_nested(&ctx->mutex, SINGLE_DEPTH_NESTING);
- raw_spin_lock_irq(&ctx->lock);
- perf_group_detach(event);
- raw_spin_unlock_irq(&ctx->lock);
- perf_remove_from_context(event);
+ perf_remove_from_context(event, true);
mutex_unlock(&ctx->mutex);
free_event(event);
@@ -6505,7 +6516,7 @@ SYSCALL_DEFINE5(perf_event_open,
struct perf_event_context *gctx = group_leader->ctx;
mutex_lock(&gctx->mutex);
- perf_remove_from_context(group_leader);
+ perf_remove_from_context(group_leader, false);
/*
* Removing from the context ends up with disabled
@@ -6515,7 +6526,7 @@ SYSCALL_DEFINE5(perf_event_open,
perf_event__state_init(group_leader);
list_for_each_entry(sibling, &group_leader->sibling_list,
group_entry) {
- perf_remove_from_context(sibling);
+ perf_remove_from_context(sibling, false);
perf_event__state_init(sibling);
put_ctx(gctx);
}
@@ -6668,13 +6679,7 @@ __perf_event_exit_task(struct perf_event
struct perf_event_context *child_ctx,
struct task_struct *child)
{
- if (child_event->parent) {
- raw_spin_lock_irq(&child_ctx->lock);
- perf_group_detach(child_event);
- raw_spin_unlock_irq(&child_ctx->lock);
- }
-
- perf_remove_from_context(child_event);
+ perf_remove_from_context(child_event, !!child_event->parent);
/*
* It can happen that the parent exits first, and has events
@@ -7159,14 +7164,14 @@ static void perf_pmu_rotate_stop(struct
static void __perf_event_exit_context(void *__info)
{
+ struct remove_event re = { .detach_group = false };
struct perf_event_context *ctx = __info;
- struct perf_event *event;
perf_pmu_rotate_stop(ctx->pmu);
rcu_read_lock();
- list_for_each_entry_rcu(event, &ctx->event_list, event_entry)
- __perf_remove_from_context(event);
+ list_for_each_entry_rcu(re.event, &ctx->event_list, event_entry)
+ __perf_remove_from_context(&re);
rcu_read_unlock();
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 05/88] mm/memory-failure.c: fix memory leak by race between poison and unpoison
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 04/88] perf: Fix race in removing an event Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 06/88] ARM: 8051/1: put_user: fix possible data corruption in put_user Greg Kroah-Hartman
` (82 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Naoya Horiguchi, Andi Kleen,
Andrew Morton, Linus Torvalds
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
commit 3e030ecc0fc7de10fd0da10c1c19939872a31717 upstream.
When a memory error happens on an in-use page or (free and in-use)
hugepage, the victim page is isolated with its refcount set to one.
When you try to unpoison it later, unpoison_memory() calls put_page()
for it twice in order to bring the page back to free page pool (buddy or
free hugepage list). However, if another memory error occurs on the
page which we are unpoisoning, memory_failure() returns without
releasing the refcount which was incremented in the same call at first,
which results in memory leak and unconsistent num_poisoned_pages
statistics. This patch fixes it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memory-failure.c | 2 ++
1 file changed, 2 insertions(+)
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1122,6 +1122,8 @@ int memory_failure(unsigned long pfn, in
*/
if (!PageHWPoison(p)) {
printk(KERN_ERR "MCE %#lx: just unpoisoned\n", pfn);
+ atomic_long_sub(nr_pages, &mce_bad_pages);
+ put_page(hpage);
res = 0;
goto out;
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 06/88] ARM: 8051/1: put_user: fix possible data corruption in put_user
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 05/88] mm/memory-failure.c: fix memory leak by race between poison and unpoison Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 07/88] sched: Fix hotplug vs. set_cpus_allowed_ptr() Greg Kroah-Hartman
` (81 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrey Ryabinin, Nicolas Pitre, Russell King
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Ryabinin <a.ryabinin@samsung.com>
commit 537094b64b229bf3ad146042f83e74cf6abe59df upstream.
According to arm procedure call standart r2 register is call-cloberred.
So after the result of x expression was put into r2 any following
function call in p may overwrite r2. To fix this, the result of p
expression must be saved to the temporary variable before the
assigment x expression to __r2.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/include/asm/uaccess.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -158,8 +158,9 @@ extern int __put_user_8(void *, unsigned
#define put_user(x,p) \
({ \
unsigned long __limit = current_thread_info()->addr_limit - 1; \
+ const typeof(*(p)) __user *__tmp_p = (p); \
register const typeof(*(p)) __r2 asm("r2") = (x); \
- register const typeof(*(p)) __user *__p asm("r0") = (p);\
+ register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
switch (sizeof(*(__p))) { \
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 07/88] sched: Fix hotplug vs. set_cpus_allowed_ptr()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 06/88] ARM: 8051/1: put_user: fix possible data corruption in put_user Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 08/88] md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync" Greg Kroah-Hartman
` (80 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lai Jiangshan, Peter Zijlstra,
Andrew Morton, Gautham R. Shenoy, Linus Torvalds, Michael wang,
Paul Gortmaker, Rafael J. Wysocki, Srivatsa S. Bhat, Toshi Kani,
Ingo Molnar
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lai Jiangshan <laijs@cn.fujitsu.com>
commit 6acbfb96976fc3350e30d964acb1dbbdf876d55e upstream.
Lai found that:
WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b()
...
migration_cpu_stop+0x1d/0x22
was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is
always a sub-set of cpu_online_mask.
This isn't true since 5fbd036b552f ("sched: Cleanup cpu_active madness").
So set active and online at the same time to avoid this particular
problem.
Fixes: 5fbd036b552f ("sched: Cleanup cpu_active madness")
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/cpu.c | 6 ++++--
kernel/sched/core.c | 1 -
2 files changed, 4 insertions(+), 3 deletions(-)
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -631,10 +631,12 @@ void set_cpu_present(unsigned int cpu, b
void set_cpu_online(unsigned int cpu, bool online)
{
- if (online)
+ if (online) {
cpumask_set_cpu(cpu, to_cpumask(cpu_online_bits));
- else
+ cpumask_set_cpu(cpu, to_cpumask(cpu_active_bits));
+ } else {
cpumask_clear_cpu(cpu, to_cpumask(cpu_online_bits));
+ }
}
void set_cpu_active(unsigned int cpu, bool active)
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5656,7 +5656,6 @@ static int __cpuinit sched_cpu_active(st
unsigned long action, void *hcpu)
{
switch (action & ~CPU_TASKS_FROZEN) {
- case CPU_STARTING:
case CPU_DOWN_FAILED:
set_cpu_active((long)hcpu, true);
return NOTIFY_OK;
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 08/88] md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync".
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 07/88] sched: Fix hotplug vs. set_cpus_allowed_ptr() Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 10/88] Staging: speakup: Move pasting into a work item Greg Kroah-Hartman
` (79 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, NeilBrown
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit 3991b31ea072b070081ca3bfa860a077eda67de5 upstream.
If mddev->ro is set, md_to_sync will (correctly) abort.
However in that case MD_RECOVERY_INTR isn't set.
If a RESHAPE had been requested, then ->finish_reshape() will be
called and it will think the reshape was successful even though
nothing happened.
Normally a resync will not be requested if ->ro is set, but if an
array is stopped while a reshape is on-going, then when the array is
started, the reshape will be restarted. If the array is also set
read-only at this point, the reshape will instantly appear to success,
resulting in data corruption.
Consequently, this patch is suitable for any -stable kernel.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7071,8 +7071,10 @@ void md_do_sync(struct mddev *mddev)
/* just incase thread restarts... */
if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
return;
- if (mddev->ro) /* never try to sync a read-only array */
+ if (mddev->ro) {/* never try to sync a read-only array */
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
return;
+ }
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 10/88] Staging: speakup: Move pasting into a work item
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 08/88] md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync" Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 11/88] ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop Greg Kroah-Hartman
` (78 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Gevers, Ben Hutchings
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <ben@decadent.org.uk>
commit d7500135802ca55b3f4e01a16544e8b34082f8c3 upstream.
Input is handled in softirq context, but when pasting we may
need to sleep. speakup_paste_selection() currently tries to
bodge this by busy-waiting if in_atomic(), but that doesn't
help because the ldisc may also sleep.
For bonus breakage, speakup_paste_selection() changes the
state of current, even though it's not running in process
context.
Move it into a work item and make sure to cancel it on exit.
References: https://bugs.debian.org/735202
References: https://bugs.debian.org/744015
Reported-by: Paul Gevers <elbrus@debian.org>
Reported-and-tested-by: Jarek Czekalski <jarekczek@poczta.onet.pl>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/speakup/main.c | 1
drivers/staging/speakup/selection.c | 40 +++++++++++++++++++++++++++++-------
drivers/staging/speakup/speakup.h | 1
3 files changed, 35 insertions(+), 7 deletions(-)
--- a/drivers/staging/speakup/main.c
+++ b/drivers/staging/speakup/main.c
@@ -2219,6 +2219,7 @@ static void __exit speakup_exit(void)
unregister_keyboard_notifier(&keyboard_notifier_block);
unregister_vt_notifier(&vt_notifier_block);
speakup_unregister_devsynth();
+ speakup_cancel_paste();
del_timer(&cursor_timer);
kthread_stop(speakup_task);
speakup_task = NULL;
--- a/drivers/staging/speakup/selection.c
+++ b/drivers/staging/speakup/selection.c
@@ -3,6 +3,8 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/selection.h>
+#include <linux/workqueue.h>
+#include <asm/cmpxchg.h>
#include "speakup.h"
@@ -121,20 +123,24 @@ int speakup_set_selection(struct tty_str
return 0;
}
-/* TODO: move to some helper thread, probably. That'd fix having to check for
- * in_atomic(). */
-int speakup_paste_selection(struct tty_struct *tty)
-{
+struct speakup_paste_work {
+ struct work_struct work;
+ struct tty_struct *tty;
+};
+
+static void __speakup_paste_selection(struct work_struct *work)
+{
+ struct speakup_paste_work *spw =
+ container_of(work, struct speakup_paste_work, work);
+ struct tty_struct *tty = xchg(&spw->tty, NULL);
struct vc_data *vc = (struct vc_data *) tty->driver_data;
int pasted = 0, count;
DECLARE_WAITQUEUE(wait, current);
+
add_wait_queue(&vc->paste_wait, &wait);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
if (test_bit(TTY_THROTTLED, &tty->flags)) {
- if (in_atomic())
- /* if we are in an interrupt handler, abort */
- break;
schedule();
continue;
}
@@ -146,6 +152,26 @@ int speakup_paste_selection(struct tty_s
}
remove_wait_queue(&vc->paste_wait, &wait);
current->state = TASK_RUNNING;
+ tty_kref_put(tty);
+}
+
+static struct speakup_paste_work speakup_paste_work = {
+ .work = __WORK_INITIALIZER(speakup_paste_work.work,
+ __speakup_paste_selection)
+};
+
+int speakup_paste_selection(struct tty_struct *tty)
+{
+ if (cmpxchg(&speakup_paste_work.tty, NULL, tty) != NULL)
+ return -EBUSY;
+
+ tty_kref_get(tty);
+ schedule_work_on(WORK_CPU_UNBOUND, &speakup_paste_work.work);
return 0;
}
+void speakup_cancel_paste(void)
+{
+ cancel_work_sync(&speakup_paste_work.work);
+ tty_kref_put(speakup_paste_work.tty);
+}
--- a/drivers/staging/speakup/speakup.h
+++ b/drivers/staging/speakup/speakup.h
@@ -84,6 +84,7 @@ extern void synth_buffer_clear(void);
extern void speakup_clear_selection(void);
extern int speakup_set_selection(struct tty_struct *tty);
extern int speakup_paste_selection(struct tty_struct *tty);
+extern void speakup_cancel_paste(void);
extern void speakup_register_devsynth(void);
extern void speakup_unregister_devsynth(void);
extern void synth_write(const char *buf, size_t count);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 11/88] ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 10/88] Staging: speakup: Move pasting into a work item Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 12/88] ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup Greg Kroah-Hartman
` (77 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ronan Marquet, Takashi Iwai
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ronan Marquet <ronan.marquet@orange.fr>
commit e30cf2d2bed3aed74a651c64de323ba26e4ff7d0 upstream.
Correcion of wrong fixup entries add in commit ca8f0424 to replace
static model quirk for PB V7900 laptop (will model).
[note: the removal of ALC260_FIXUP_HP_PIN_0F chain is also needed as a
part of the fix; otherwise the pin is set up wrongly as a headphone,
and user-space (PulseAudio) may be wrongly trying to detect the jack
state -- tiwai]
Fixes: ca8f04247eaa ('ALSA: hda/realtek - Add the fixup codes for ALC260 model=will')
Signed-off-by: Ronan Marquet <ronan.marquet@orange.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4951,12 +4951,10 @@ static const struct alc_fixup alc260_fix
[ALC260_FIXUP_COEF] = {
.type = ALC_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
- { 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
- { 0x20, AC_VERB_SET_PROC_COEF, 0x3040 },
+ { 0x1a, AC_VERB_SET_COEF_INDEX, 0x07 },
+ { 0x1a, AC_VERB_SET_PROC_COEF, 0x3040 },
{ }
},
- .chained = true,
- .chain_id = ALC260_FIXUP_HP_PIN_0F,
},
[ALC260_FIXUP_GPIO1] = {
.type = ALC_FIXUP_VERBS,
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 12/88] ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 11/88] ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 13/88] USB: ftdi_sio: add NovaTech OrionLXm product ID Greg Kroah-Hartman
` (76 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit 192a98e280e560510a62aca8cfa83b4ae7c095bb upstream.
The conversion to a fixup table for Replacer model with ALC260 in
commit 20f7d928 took the wrong widget NID for COEF setups. Namely,
NID 0x1a should have been used instead of NID 0x20, which is the
common node for all Realtek codecs but ALC260.
Fixes: 20f7d928fa6e ('ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4969,8 +4969,8 @@ static const struct alc_fixup alc260_fix
[ALC260_FIXUP_REPLACER] = {
.type = ALC_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
- { 0x20, AC_VERB_SET_COEF_INDEX, 0x07 },
- { 0x20, AC_VERB_SET_PROC_COEF, 0x3050 },
+ { 0x1a, AC_VERB_SET_COEF_INDEX, 0x07 },
+ { 0x1a, AC_VERB_SET_PROC_COEF, 0x3050 },
{ }
},
.chained = true,
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 13/88] USB: ftdi_sio: add NovaTech OrionLXm product ID
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 12/88] ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 14/88] USB: serial: option: add support for Novatel E371 PCIe card Greg Kroah-Hartman
` (75 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, George McCollister, Johan Hovold
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: George McCollister <george.mccollister@gmail.com>
commit d0839d757e6294921c31b1c4ca4f1dcc5df63bcd upstream.
The NovaTech OrionLXm uses an onboard FTDI serial converter for JTAG and
console access.
Here is the lsusb output:
Bus 004 Device 123: ID 0403:7c90 Future Technology Devices
International, Ltd
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ftdi_sio.c | 2 ++
drivers/usb/serial/ftdi_sio_ids.h | 5 +++++
2 files changed, 7 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -591,6 +591,8 @@ static struct usb_device_id id_table_com
{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
/*
* ELV devices:
*/
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -538,6 +538,11 @@
*/
#define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */
+/*
+ * NovaTech product ids (FTDI_VID)
+ */
+#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */
+
/********************************/
/** third-party VID/PID combos **/
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 14/88] USB: serial: option: add support for Novatel E371 PCIe card
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 13/88] USB: ftdi_sio: add NovaTech OrionLXm product ID Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 15/88] USB: io_ti: fix firmware download on big-endian machines (part 2) Greg Kroah-Hartman
` (74 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexej Starschenko, Johan Hovold
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexej Starschenko <starschenko@gmail.com>
commit 8a61ba3a47ac39f660702aa66a172185dd605a86 upstream.
Adds product ID for the Novatel E371 PCI Express Mini Card.
$ lsusb
Bus 001 Device 024: ID 1410:9011 Novatel Wireless
$ usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 24 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1410 ProdID=9011 Rev=00.03
S: Manufacturer=Novatel Wireless, Inc.
S: Product=Novatel Wireless HSPA
S: SerialNumber=012773002115811
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
Tested with kernel 3.2.0.
Signed-off-by: Alexej Starschenko <starschenko@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -161,6 +161,7 @@ static void option_instat_callback(struc
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
#define NOVATELWIRELESS_PRODUCT_E362 0x9010
+#define NOVATELWIRELESS_PRODUCT_E371 0x9011
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
@@ -1025,6 +1026,7 @@ static const struct usb_device_id option
/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 15/88] USB: io_ti: fix firmware download on big-endian machines (part 2)
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (12 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 14/88] USB: serial: option: add support for Novatel E371 PCIe card Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 16/88] USB: Avoid runtime suspend loops for HCDs that cant handle suspend/resume Greg Kroah-Hartman
` (73 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kbuild test robot, Ludovic Drolez,
Johan Hovold
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <jhovold@gmail.com>
commit c03890ff5e24a4bf59059f2d179f427559b7330a upstream.
A recent patch that purported to fix firmware download on big-endian
machines failed to add the corresponding sparse annotation to the
i2c-header. This was reported by the kbuild test robot.
Adding the appropriate annotation revealed another endianess bug related
to the i2c-header Size-field in a code path that is exercised when the
firmware is actually being downloaded (and not just verified and left
untouched unless older than the firmware at hand).
This patch adds the required sparse annotation to the i2c-header and
makes sure that the Size-field is sent in little-endian byte order
during firmware download also on big-endian machines.
Note that this patch is only compile-tested, but that there is no
functional change for little-endian systems.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Ludovic Drolez <ldrolez@debian.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/io_ti.c | 2 +-
drivers/usb/serial/io_usbvend.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -915,7 +915,7 @@ static int build_i2c_fw_hdr(__u8 *header
firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data;
i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK;
- i2c_header->Size = (__u16)buffer_size;
+ i2c_header->Size = cpu_to_le16(buffer_size);
i2c_header->CheckSum = cs;
firmware_rec->Ver_Major = OperationalMajorVersion;
firmware_rec->Ver_Minor = OperationalMinorVersion;
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -594,7 +594,7 @@ struct edge_boot_descriptor {
struct ti_i2c_desc {
__u8 Type; // Type of descriptor
- __u16 Size; // Size of data only not including header
+ __le16 Size; // Size of data only not including header
__u8 CheckSum; // Checksum (8 bit sum of data only)
__u8 Data[0]; // Data starts here
} __attribute__((packed));
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 16/88] USB: Avoid runtime suspend loops for HCDs that cant handle suspend/resume
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (13 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 15/88] USB: io_ti: fix firmware download on big-endian machines (part 2) Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 17/88] mm: rmap: fix use-after-free in __put_anon_vma Greg Kroah-Hartman
` (72 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alan Stern, Will Deacon
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <stern@rowland.harvard.edu>
commit 8ef42ddd9a53b73e6fc3934278710c27f80f324f upstream.
Not all host controller drivers have bus-suspend and bus-resume
methods. When one doesn't, it will cause problems if runtime PM is
enabled in the kernel. The PM core will attempt to suspend the
controller's root hub, the suspend will fail because there is no
bus-suspend routine, and a -EBUSY error code will be returned to the
PM core. This will cause the suspend attempt to be repeated shortly
thereafter, in a never-ending loop.
Part of the problem is that the original error code -ENOENT gets
changed to -EBUSY in usb_runtime_suspend(), on the grounds that the PM
core will interpret -ENOENT as meaning that the root hub has gotten
into a runtime-PM error state. While this change is appropriate for
real USB devices, it's not such a good idea for a root hub. In fact,
considering the root hub to be in a runtime-PM error state would not
be far from the truth. Therefore this patch updates
usb_runtime_suspend() so that it adjusts error codes only for
non-root-hub devices.
Furthermore, the patch attempts to prevent the problem from occurring
in the first place by not enabling runtime PM by default for root hubs
whose host controller driver doesn't have bus_suspend and bus_resume
methods.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/driver.c | 9 ++++++---
drivers/usb/core/hub.c | 15 +++++++++++++--
2 files changed, 19 insertions(+), 5 deletions(-)
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1708,10 +1708,13 @@ int usb_runtime_suspend(struct device *d
if (status == -EAGAIN || status == -EBUSY)
usb_mark_last_busy(udev);
- /* The PM core reacts badly unless the return code is 0,
- * -EAGAIN, or -EBUSY, so always return -EBUSY on an error.
+ /*
+ * The PM core reacts badly unless the return code is 0,
+ * -EAGAIN, or -EBUSY, so always return -EBUSY on an error
+ * (except for root hubs, because they don't suspend through
+ * an upstream port like other USB devices).
*/
- if (status != 0)
+ if (status != 0 && udev->parent)
return -EBUSY;
return status;
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1401,8 +1401,19 @@ static int hub_probe(struct usb_interfac
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
- /* Hubs have proper suspend/resume support. */
- usb_enable_autosuspend(hdev);
+ /*
+ * Hubs have proper suspend/resume support, except for root hubs
+ * where the controller driver doesn't have bus_suspend and
+ * bus_resume methods.
+ */
+ if (hdev->parent) { /* normal device */
+ usb_enable_autosuspend(hdev);
+ } else { /* root hub */
+ const struct hc_driver *drv = bus_to_hcd(hdev->bus)->driver;
+
+ if (drv->bus_suspend && drv->bus_resume)
+ usb_enable_autosuspend(hdev);
+ }
if (hdev->level == MAX_TOPO_LEVEL) {
dev_err(&intf->dev,
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 17/88] mm: rmap: fix use-after-free in __put_anon_vma
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (14 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 16/88] USB: Avoid runtime suspend loops for HCDs that cant handle suspend/resume Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 18/88] Bluetooth: Fix missing length checks for L2CAP signalling PDUs Greg Kroah-Hartman
` (71 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrey Ryabinin, Peter Zijlstra,
Linus Torvalds
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Ryabinin <a.ryabinin@samsung.com>
commit 624483f3ea82598ab0f62f1bdb9177f531ab1892 upstream.
While working address sanitizer for kernel I've discovered
use-after-free bug in __put_anon_vma.
For the last anon_vma, anon_vma->root freed before child anon_vma.
Later in anon_vma_free(anon_vma) we are referencing to already freed
anon_vma->root to check rwsem.
This fixes it by freeing the child anon_vma before freeing
anon_vma->root.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/rmap.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1721,10 +1721,9 @@ void __put_anon_vma(struct anon_vma *ano
{
struct anon_vma *root = anon_vma->root;
+ anon_vma_free(anon_vma);
if (root != anon_vma && atomic_dec_and_test(&root->refcount))
anon_vma_free(root);
-
- anon_vma_free(anon_vma);
}
#ifdef CONFIG_MIGRATION
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 18/88] Bluetooth: Fix missing length checks for L2CAP signalling PDUs
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (15 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 17/88] mm: rmap: fix use-after-free in __put_anon_vma Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 19/88] Bluetooth: Fix invalid length check in l2cap_information_rsp() Greg Kroah-Hartman
` (70 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johan Hedberg, Gustavo Padovan,
John W. Linville, Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hedberg <johan.hedberg@intel.com>
commit cb3b3152b2f5939d67005cff841a1ca748b19888 upstream.
There has been code in place to check that the L2CAP length header
matches the amount of data received, but many PDU handlers have not been
checking that the data received actually matches that expected by the
specific PDU. This patch adds passing the length header to the specific
handler functions and ensures that those functions fail cleanly in the
case of an incorrect amount of data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2:
- Adjust context
- Move uses of *req below the new check in l2cap_connect_req]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[wujg: Backported to 3.4:
- Adjust context
- Adjust l2cap_create_channel_rsp()'s parameters]
Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bluetooth/l2cap_core.c | 92 +++++++++++++++++++++++++++++++++------------
1 file changed, 69 insertions(+), 23 deletions(-)
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2620,10 +2620,15 @@ done:
}
}
-static inline int l2cap_command_rej(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static inline int l2cap_command_rej(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ u8 *data)
{
struct l2cap_cmd_rej_unk *rej = (struct l2cap_cmd_rej_unk *) data;
+ if (cmd_len < sizeof(*rej))
+ return -EPROTO;
+
if (rej->reason != L2CAP_REJ_NOT_UNDERSTOOD)
return 0;
@@ -2640,7 +2645,8 @@ static inline int l2cap_command_rej(stru
return 0;
}
-static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static int l2cap_connect_req(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
{
struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
struct l2cap_conn_rsp rsp;
@@ -2648,8 +2654,14 @@ static inline int l2cap_connect_req(stru
struct sock *parent, *sk = NULL;
int result, status = L2CAP_CS_NO_INFO;
- u16 dcid = 0, scid = __le16_to_cpu(req->scid);
- __le16 psm = req->psm;
+ u16 dcid = 0, scid;
+ __le16 psm;
+
+ if (cmd_len < sizeof(struct l2cap_conn_req))
+ return -EPROTO;
+
+ scid = __le16_to_cpu(req->scid);
+ psm = req->psm;
BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid);
@@ -2770,7 +2782,9 @@ sendresp:
return 0;
}
-static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static int l2cap_connect_rsp(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ u8 *data)
{
struct l2cap_conn_rsp *rsp = (struct l2cap_conn_rsp *) data;
u16 scid, dcid, result, status;
@@ -2778,6 +2792,9 @@ static inline int l2cap_connect_rsp(stru
u8 req[128];
int err;
+ if (cmd_len < sizeof(*rsp))
+ return -EPROTO;
+
scid = __le16_to_cpu(rsp->scid);
dcid = __le16_to_cpu(rsp->dcid);
result = __le16_to_cpu(rsp->result);
@@ -2857,6 +2874,9 @@ static inline int l2cap_config_req(struc
struct l2cap_chan *chan;
int len;
+ if (cmd_len < sizeof(*req))
+ return -EPROTO;
+
dcid = __le16_to_cpu(req->dcid);
flags = __le16_to_cpu(req->flags);
@@ -2882,7 +2902,7 @@ static inline int l2cap_config_req(struc
/* Reject if config buffer is too small. */
len = cmd_len - sizeof(*req);
- if (len < 0 || chan->conf_len + len > sizeof(chan->conf_req)) {
+ if (chan->conf_len + len > sizeof(chan->conf_req)) {
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP,
l2cap_build_conf_rsp(chan, rsp,
L2CAP_CONF_REJECT, flags), rsp);
@@ -2959,12 +2979,17 @@ unlock:
return 0;
}
-static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static inline int l2cap_config_rsp(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ u8 *data)
{
struct l2cap_conf_rsp *rsp = (struct l2cap_conf_rsp *)data;
u16 scid, flags, result;
struct l2cap_chan *chan;
- int len = cmd->len - sizeof(*rsp);
+ int len = cmd_len - sizeof(*rsp);
+
+ if (cmd_len < sizeof(*rsp))
+ return -EPROTO;
scid = __le16_to_cpu(rsp->scid);
flags = __le16_to_cpu(rsp->flags);
@@ -3066,7 +3091,9 @@ done:
return 0;
}
-static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static inline int l2cap_disconnect_req(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ u8 *data)
{
struct l2cap_disconn_req *req = (struct l2cap_disconn_req *) data;
struct l2cap_disconn_rsp rsp;
@@ -3074,6 +3101,9 @@ static inline int l2cap_disconnect_req(s
struct l2cap_chan *chan;
struct sock *sk;
+ if (cmd_len != sizeof(*req))
+ return -EPROTO;
+
scid = __le16_to_cpu(req->scid);
dcid = __le16_to_cpu(req->dcid);
@@ -3110,12 +3140,17 @@ static inline int l2cap_disconnect_req(s
return 0;
}
-static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ u8 *data)
{
struct l2cap_disconn_rsp *rsp = (struct l2cap_disconn_rsp *) data;
u16 dcid, scid;
struct l2cap_chan *chan;
+ if (cmd_len != sizeof(*rsp))
+ return -EPROTO;
+
scid = __le16_to_cpu(rsp->scid);
dcid = __le16_to_cpu(rsp->dcid);
@@ -3142,11 +3177,16 @@ static inline int l2cap_disconnect_rsp(s
return 0;
}
-static inline int l2cap_information_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static inline int l2cap_information_req(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ u8 *data)
{
struct l2cap_info_req *req = (struct l2cap_info_req *) data;
u16 type;
+ if (cmd_len != sizeof(*req))
+ return -EPROTO;
+
type = __le16_to_cpu(req->type);
BT_DBG("type 0x%4.4x", type);
@@ -3192,11 +3232,16 @@ static inline int l2cap_information_req(
return 0;
}
-static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data)
+static inline int l2cap_information_rsp(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ u8 *data)
{
struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) data;
u16 type, result;
+ if (cmd_len != sizeof(*rsp))
+ return -EPROTO;
+
type = __le16_to_cpu(rsp->type);
result = __le16_to_cpu(rsp->result);
@@ -3282,11 +3327,12 @@ static inline int l2cap_create_channel_r
}
static inline int l2cap_create_channel_rsp(struct l2cap_conn *conn,
- struct l2cap_cmd_hdr *cmd, void *data)
+ struct l2cap_cmd_hdr *cmd, u16 cmd_len,
+ void *data)
{
BT_DBG("conn %p", conn);
- return l2cap_connect_rsp(conn, cmd, data);
+ return l2cap_connect_rsp(conn, cmd, cmd_len, data);
}
static void l2cap_send_move_chan_rsp(struct l2cap_conn *conn, u8 ident,
@@ -3479,15 +3525,15 @@ static inline int l2cap_bredr_sig_cmd(st
switch (cmd->code) {
case L2CAP_COMMAND_REJ:
- l2cap_command_rej(conn, cmd, data);
+ l2cap_command_rej(conn, cmd, cmd_len, data);
break;
case L2CAP_CONN_REQ:
- err = l2cap_connect_req(conn, cmd, data);
+ err = l2cap_connect_req(conn, cmd, cmd_len, data);
break;
case L2CAP_CONN_RSP:
- err = l2cap_connect_rsp(conn, cmd, data);
+ err = l2cap_connect_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_CONF_REQ:
@@ -3495,15 +3541,15 @@ static inline int l2cap_bredr_sig_cmd(st
break;
case L2CAP_CONF_RSP:
- err = l2cap_config_rsp(conn, cmd, data);
+ err = l2cap_config_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_DISCONN_REQ:
- err = l2cap_disconnect_req(conn, cmd, data);
+ err = l2cap_disconnect_req(conn, cmd, cmd_len, data);
break;
case L2CAP_DISCONN_RSP:
- err = l2cap_disconnect_rsp(conn, cmd, data);
+ err = l2cap_disconnect_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_ECHO_REQ:
@@ -3514,11 +3560,11 @@ static inline int l2cap_bredr_sig_cmd(st
break;
case L2CAP_INFO_REQ:
- err = l2cap_information_req(conn, cmd, data);
+ err = l2cap_information_req(conn, cmd, cmd_len, data);
break;
case L2CAP_INFO_RSP:
- err = l2cap_information_rsp(conn, cmd, data);
+ err = l2cap_information_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_CREATE_CHAN_REQ:
@@ -3526,7 +3572,7 @@ static inline int l2cap_bredr_sig_cmd(st
break;
case L2CAP_CREATE_CHAN_RSP:
- err = l2cap_create_channel_rsp(conn, cmd, data);
+ err = l2cap_create_channel_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_MOVE_CHAN_REQ:
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 19/88] Bluetooth: Fix invalid length check in l2cap_information_rsp()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (16 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 18/88] Bluetooth: Fix missing length checks for L2CAP signalling PDUs Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 20/88] Bluetooth: Support AR3011 in Acer Iconia Tab W500 Greg Kroah-Hartman
` (69 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jaganath Kanakkassery,
Chan-Yeol Park, Johan Hedberg, Gustavo Padovan, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jaganath Kanakkassery <jaganath.k@samsung.com>
commit 3f6fa3d489e127ca5a5b298eabac3ff5dbe0e112 upstream.
The length check is invalid since the length varies with type of
info response.
This was introduced by the commit cb3b3152b2f5939d67005cff841a1ca748b19888
Because of this, l2cap info rsp is not handled and command reject is sent.
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Command rej: reason 0
Command not understood
Cc: stable@vger.kernel.org
Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Chan-Yeol Park <chanyeol.park@samsung.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bluetooth/l2cap_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3445,7 +3445,7 @@ static inline int l2cap_move_channel_con
struct l2cap_move_chan_cfm_rsp *rsp = data;
u16 icid;
- if (cmd_len != sizeof(*rsp))
+ if (cmd_len < sizeof(*rsp))
return -EPROTO;
icid = le16_to_cpu(rsp->icid);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 20/88] Bluetooth: Support AR3011 in Acer Iconia Tab W500
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (17 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 19/88] Bluetooth: Fix invalid length check in l2cap_information_rsp() Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 21/88] Bluetooth: add support for atheros 0930:0219 Greg Kroah-Hartman
` (68 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marek Vasut, Gustavo Padovan,
Johan Hedberg, Marcel Holtmann, Gustavo Padovan, Ben Hutchings,
Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut <marex@denx.de>
commit 6eda541d12116b4772baa09d3e8d7b0389df4289 upstream.
Acer used this chip connected via USB:
Bus 005 Device 005: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0cf3 Atheros Communications, Inc.
idProduct 0x3005 AR3011 Bluetooth
bcdDevice 0.01
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 1 +
drivers/bluetooth/btusb.c | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -63,6 +63,7 @@ static struct usb_device_id ath3k_table[
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ { USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -127,6 +127,7 @@ static struct usb_device_id blacklist_ta
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 21/88] Bluetooth: add support for atheros 0930:0219
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (18 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 20/88] Bluetooth: Support AR3011 in Acer Iconia Tab W500 Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 22/88] Bluetooth: add support for atheros 0489:e057 Greg Kroah-Hartman
` (67 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giancarlo Formicuccia,
Gustavo Padovan, Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
commit 6c4ae5c2e7bfbb7d10d73611f69ac8a8609d84fd upstream.
Add support for the AR3012 chip found on the Toshiba Sallite M840-1000-XQ.
usb-devices shows:
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0930 ProdID=0219 Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -81,6 +81,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0930, 0x0219) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -104,6 +105,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -145,6 +145,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 22/88] Bluetooth: add support for atheros 0489:e057
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (19 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 21/88] Bluetooth: add support for atheros 0930:0219 Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 23/88] Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Greg Kroah-Hartman
` (66 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peng Chen, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peng Chen <pengchen@qca.qualcomm.com>
commit 2096ae6ca647302d50a68aa36cb66a00e7dfac70 upstream.
Add support for the AR3012 chip found on Fioxconn.
usb-devices shows:
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 44 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e057 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -82,6 +82,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0930, 0x0219) },
+ { USB_DEVICE(0x0489, 0xe057) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -106,6 +107,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 23/88] Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (20 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 22/88] Bluetooth: add support for atheros 0489:e057 Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 24/88] Bluetooth: Add support for Sony Vaio T-Series Greg Kroah-Hartman
` (65 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Gruetzner, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Gruetzner <mgruetzn@gmx.de>
commit 85d59726c5c66016a507f1f4a60db8e374dd284d upstream.
Add Foxconn/Hon Hai AR5BBU22 Bluetooth Module( 0x489:0xE03C) to
the blacklist of btusb module and add it to the ath3k module to properly
load the firmware in Kernel 3.3.4
The device is integrated in e.g. some Acer Aspire 7750G.
Output from /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e03c Rev= 0.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Michael Gruetzner <mgruetzn@gmx.de>
Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 6 ++++++
drivers/bluetooth/btusb.c | 3 +++
2 files changed, 9 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -87,6 +87,9 @@ static struct usb_device_id ath3k_table[
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
+ /* Atheros AR5BBU22 with sflash firmware */
+ { USB_DEVICE(0x0489, 0xE03C) },
+
{ } /* Terminating entry */
};
@@ -109,6 +112,9 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
+ /* Atheros AR5BBU22 with sflash firmware */
+ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+
{ } /* Terminating entry */
};
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -151,6 +151,9 @@ static struct usb_device_id blacklist_ta
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
+ /* Atheros AR5BBU12 with sflash firmware */
+ { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 24/88] Bluetooth: Add support for Sony Vaio T-Series
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (21 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 23/88] Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 25/88] Bluetooth: Add USB_VENDOR_AND_INTERFACE_INFO() for Broadcom/Foxconn Greg Kroah-Hartman
` (64 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yevgeniy Melnichuk,
Mohammed Shafi Shajakhan, Marcel Holtmann, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yevgeniy Melnichuk <yevgeniy.melnichuk@googlemail.com>
commit bc21fde2d549d1cb1ebef04016eb7affa43bb5c1 upstream.
Add Sony Vaio T-Series Bluetooth Module( 0x489:0xE036) to
the blacklist of btusb module and add it to the ath3k module.
output of cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e036 Rev= 0.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Yevgeniy Melnichuk <yevgeniy.melnichuk@googlemail.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -89,6 +89,7 @@ static struct usb_device_id ath3k_table[
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C) },
+ { USB_DEVICE(0x0489, 0xE036) },
{ } /* Terminating entry */
};
@@ -114,6 +115,7 @@ static struct usb_device_id ath3k_blist_
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -153,6 +153,7 @@ static struct usb_device_id blacklist_ta
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 25/88] Bluetooth: Add USB_VENDOR_AND_INTERFACE_INFO() for Broadcom/Foxconn
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (22 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 24/88] Bluetooth: Add support for Sony Vaio T-Series Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 26/88] Bluetooth: Add support for BCM20702A0 [04ca, 2003] Greg Kroah-Hartman
` (63 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gustavo Padovan, Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
commit ee66401bb94b1f2ce51089c341dcdd25d26ae631 upstream.
Foxconn devices has a vendor specific class of device, we will match them
differently now.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -108,7 +108,7 @@ static struct usb_device_id btusb_table[
{ USB_DEVICE(0x413c, 0x8197) },
/* Foxconn - Hon Hai */
- { USB_DEVICE(0x0489, 0xe033) },
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) },
/*Broadcom devices with vendor specific id */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 26/88] Bluetooth: Add support for BCM20702A0 [04ca, 2003]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (23 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 25/88] Bluetooth: Add USB_VENDOR_AND_INTERFACE_INFO() for Broadcom/Foxconn Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 27/88] Bluetooth: Add support for BCM20702A0 [0b05, 17b5] Greg Kroah-Hartman
` (62 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Cho, Yu-Chen, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jaroslav Resler <resler@cs.cas.cz>
commit 0c1abbd1aa0416258881c303a88e618cbca0759c upstream.
Add another vendor specific ID for BCM20702A0.
output of usb-devices:
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=2003 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=446D57861623
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -104,6 +104,7 @@ static struct usb_device_id btusb_table[
{ USB_DEVICE(0x0c10, 0x0000) },
/* Broadcom BCM20702A0 */
+ { USB_DEVICE(0x04ca, 0x2003) },
{ USB_DEVICE(0x0489, 0xe042) },
{ USB_DEVICE(0x413c, 0x8197) },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 27/88] Bluetooth: Add support for BCM20702A0 [0b05, 17b5]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (24 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 26/88] Bluetooth: Add support for BCM20702A0 [04ca, 2003] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 28/88] Bluetooth: Add support for IMC Networks [13d3:3393] Greg Kroah-Hartman
` (61 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jeff Cook, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Cook <jeff@deserettechnology.com>
commit 1ee3ff6110c16acfc915a79b1e3feb5013c41e75 upstream.
Vendor-specific ID for BCM20702A0.
Support for bluetooth over Asus Wi-Fi GO!, included with Asus P8Z77-V
Deluxe.
T: Bus=07 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=17b5 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=94DBC98AC113
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Jeff Cook <jeff@deserettechnology.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -104,6 +104,7 @@ static struct usb_device_id btusb_table[
{ USB_DEVICE(0x0c10, 0x0000) },
/* Broadcom BCM20702A0 */
+ { USB_DEVICE(0x0b05, 0x17b5) },
{ USB_DEVICE(0x04ca, 0x2003) },
{ USB_DEVICE(0x0489, 0xe042) },
{ USB_DEVICE(0x413c, 0x8197) },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 28/88] Bluetooth: Add support for IMC Networks [13d3:3393]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (25 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 27/88] Bluetooth: Add support for BCM20702A0 [0b05, 17b5] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 29/88] Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k Greg Kroah-Hartman
` (60 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, AceLan Kao, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: AceLan Kao <acelan.kao@canonical.com>
commit eed307e290b96636def331375e065aca43f9069a upstream.
Add support for the AR9462 chip
T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3393 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -83,6 +83,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0930, 0x0219) },
{ USB_DEVICE(0x0489, 0xe057) },
+ { USB_DEVICE(0x13d3, 0x3393) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -112,6 +113,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -149,6 +149,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 29/88] Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (26 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 28/88] Bluetooth: Add support for IMC Networks [13d3:3393] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 30/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e] Greg Kroah-Hartman
` (59 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Schaal, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Schaal <farbing@web.de>
commit 2c262b2a5235b7f5b18d4d58394511f76371d7cb upstream.
T: Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3006 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Daniel Schaal <farbing@web.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -79,6 +79,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3005) },
+ { USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0930, 0x0219) },
@@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -145,6 +145,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 30/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (27 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 29/88] Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 31/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e056] Greg Kroah-Hartman
` (58 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, AceLan Kao, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: AceLan Kao <acelan.kao@canonical.com>
commit 3a61eda81ebcfc006ebb1496764299d53e5bf67f upstream.
Add support for the AR9462 chip
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e04e Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -85,6 +85,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0930, 0x0219) },
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x13d3, 0x3393) },
+ { USB_DEVICE(0x0489, 0xe04e) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -116,6 +117,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -151,6 +151,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 31/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e056]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (28 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 30/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 32/88] Bluetooth device 04ca:3008 should use ath3k Greg Kroah-Hartman
` (57 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, AceLan Kao, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: AceLan Kao <acelan.kao@canonical.com>
commit 2582d529c44d12502a700f1c3db062b9f44679bc upstream.
Add support for the AR9462 chip
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e056 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -86,6 +86,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x0489, 0xe04e) },
+ { USB_DEVICE(0x0489, 0xe056) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -118,6 +119,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -152,6 +152,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 32/88] Bluetooth device 04ca:3008 should use ath3k
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (29 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 31/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e056] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 33/88] Bluetooth: Add support for atheros 04ca:3004 device to ath3k Greg Kroah-Hartman
` (56 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sergio Cambra, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergio Cambra <sergio@programatica.es>
commit f4d6f7dce71a5da93da50272ff1670bf2f1146b1 upstream.
Output of /sys/kernel/debug/usb/devices
T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3008 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Sergio Cambra <sergio@programatica.es>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -80,6 +80,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
+ { USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0930, 0x0219) },
@@ -113,6 +114,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 33/88] Bluetooth: Add support for atheros 04ca:3004 device to ath3k
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (30 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 32/88] Bluetooth device 04ca:3008 should use ath3k Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 34/88] Bluetooth: Device 0cf3:3008 should map AR 3012 Greg Kroah-Hartman
` (55 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, niktr, Josh Boyer, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Boyer <jwboyer@redhat.com>
commit 3f63c340a72f2872a9362245cb2e03f3d2bb73a6 upstream.
Yet another version of the atheros bluetooth chipset
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3004 Rev=00.01
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=844750
Reported-by: niktr@mail.ru
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
+ { USB_DEVICE(0x04CA, 0x3004) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x04CA, 0x3008) },
@@ -112,6 +113,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -144,6 +144,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 34/88] Bluetooth: Device 0cf3:3008 should map AR 3012
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (31 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 33/88] Bluetooth: Add support for atheros 04ca:3004 device to ath3k Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` Greg Kroah-Hartman
` (54 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sunguk Lee, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sunguk Lee <d3m3vilurr@gmail.com>
commit 94a32d10f47b637ae24b78b1ddc7ef0e8396fda4 upstream.
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=3008 Rev= 0.01
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Sunguk Lee <d3m3vilurr@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -75,6 +75,7 @@ static struct usb_device_id ath3k_table[
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
@@ -110,6 +111,7 @@ static struct usb_device_id ath3k_blist_
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -141,6 +141,7 @@ static struct usb_device_id blacklist_ta
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 35/88] Bluetooth: Add support for Foxconn/Hon Hai [0489:e04d]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 02/88] perf: Prevent false warning in perf_swevent_add Greg Kroah-Hartman
` (86 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Noguchi Kazutosi, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Noguchi Kazutosi <linux@scaltinof.net>
commit 0fc110f4e4f569e12c472f73f0af485e05631403 upstream.
Add support for the AR3012 chip.
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 21 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e04d Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Noguchi Kazutosi <linux@scaltinof.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
+ { USB_DEVICE(0x0489, 0xe04d) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -156,6 +156,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 35/88] Bluetooth: Add support for Foxconn/Hon Hai [0489:e04d]
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
0 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Noguchi Kazutosi, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Noguchi Kazutosi <linux@scaltinof.net>
commit 0fc110f4e4f569e12c472f73f0af485e05631403 upstream.
Add support for the AR3012 chip.
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 21 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e04d Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Noguchi Kazutosi <linux@scaltinof.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
+ { USB_DEVICE(0x0489, 0xe04d) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -156,6 +156,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 36/88] Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (33 preceding siblings ...)
2014-06-10 0:24 ` Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 37/88] Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330] Greg Kroah-Hartman
` (52 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Cho, Yu-Chen, Gustavo Padovan,
John W. Linville, Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Cho, Yu-Chen" <acho@suse.com>
commit ff98736cbbbeb9087d4e5d7cb89e05c3e8bd01d6 upstream.
commit 178c059e7640aa8e50213400c6f3dde00189d979 upstream.
This patch adds support for Mediatek Bluetooth device
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=763f Rev= 1.00
S: Manufacturer=MediaTek
S: Product=BT
S: SerialNumber=1.0
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=450mA
A: FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=ff Prot=ff
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -63,6 +63,9 @@ static struct usb_device_id btusb_table[
/* Apple-specific (Broadcom) devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+ /* MediaTek MT76x0E */
+ { USB_DEVICE(0x0e8d, 0x763f) },
+
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 37/88] Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (34 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 36/88] Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 38/88] Bluetooth: ath3k: Add support for ID 0x13d3/0x3402 Greg Kroah-Hartman
` (51 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Loo, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Loo <tloo@saltstorm.net>
commit fb2e4631a7e23c37b9e2e7b2fd776231bbfc39d4 upstream.
commit 84eb2ae1807dd1467bf6f500fc69ae61f1907b75 upstream.
The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012
WLAN/BT-Combo card.
Add device ID to the ath3k driver to enable the bluetooth side of things.
Patch against v3.10.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04c5 ProdID=1330 Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Thomas Loo <tloo@saltstorm.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -91,6 +91,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe04d) },
+ { USB_DEVICE(0x04c5, 0x1330) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -128,6 +129,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -160,6 +160,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 38/88] Bluetooth: ath3k: Add support for ID 0x13d3/0x3402
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (35 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 37/88] Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 39/88] Bluetooth: Add support for Atheros [0cf3:3121] Greg Kroah-Hartman
` (50 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sujith Manoharan, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sujith Manoharan <sujith@msujith.org>
commit 5b77a1f3d7b7360dc2b7c6d2188d39b9f8432907 upstream.
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3402 Rev= 0.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=59701
Signed-off-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -92,6 +92,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe04d) },
{ USB_DEVICE(0x04c5, 0x1330) },
+ { USB_DEVICE(0x13d3, 0x3402) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -130,6 +131,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -161,6 +161,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 39/88] Bluetooth: Add support for Atheros [0cf3:3121]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (36 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 38/88] Bluetooth: ath3k: Add support for ID 0x13d3/0x3402 Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 40/88] Bluetooth: Add support for Atheros [0cf3:e003] Greg Kroah-Hartman
` (49 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, AceLan Kao, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: AceLan Kao <acelan.kao@canonical.com>
commit 1ebd0b21ab14efb75950079840eac29afea2a26e upstream.
Add support for the AR3012 chip.
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=3121 Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -93,6 +93,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x0489, 0xe04d) },
{ USB_DEVICE(0x04c5, 0x1330) },
{ USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x0cf3, 0x3121) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -132,6 +133,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -162,6 +162,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 40/88] Bluetooth: Add support for Atheros [0cf3:e003]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (37 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 39/88] Bluetooth: Add support for Atheros [0cf3:3121] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 41/88] Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012 Greg Kroah-Hartman
` (48 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, AceLan Kao, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: AceLan Kao <acelan.kao@canonical.com>
commit 1d5b569ef85d013a775560a90050dc630614c045 upstream.
Add support for the AR9462 chip
T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=e003 Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -94,6 +94,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x04c5, 0x1330) },
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0cf3, 0x3121) },
+ { USB_DEVICE(0x0cf3, 0xe003) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -134,6 +135,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -163,6 +163,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 41/88] Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (38 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 40/88] Bluetooth: Add support for Atheros [0cf3:e003] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 42/88] Bluetooth: Add support for BCM20702A0 [0b05, 17cb] Greg Kroah-Hartman
` (47 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peng Chen, Gustavo Padovan,
Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peng Chen <pengchen@qti.qualcomm.com>
commit 0a3658cccdf5326ea508efeb1879b0e2508bb0c3 upstream.
usb device info:
T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 15 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=e005 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -85,6 +85,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0CF3, 0xE005) },
{ USB_DEVICE(0x0930, 0x0219) },
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x13d3, 0x3393) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -154,6 +154,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 42/88] Bluetooth: Add support for BCM20702A0 [0b05, 17cb]
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (39 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 41/88] Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012 Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 43/88] virtio_blk: Drop unused request tracking list Greg Kroah-Hartman
` (46 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Raphael Kubo da Costa,
Gustavo Padovan, Ben Hutchings, Jianguo Wu
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Raphael Kubo da Costa <rakuco@FreeBSD.org>
commit 38a172bef8c93ecbfd69715fd88396988e4073fd upstream.
Yet another vendor specific ID for this chipset; this one for the ASUS
USB-BT400 Bluetooth 4.0 adapter.
T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=17cb Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=000272C64400
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Raphael Kubo da Costa <rakuco@FreeBSD.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -108,6 +108,7 @@ static struct usb_device_id btusb_table[
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0b05, 0x17b5) },
+ { USB_DEVICE(0x0b05, 0x17cb) },
{ USB_DEVICE(0x04ca, 0x2003) },
{ USB_DEVICE(0x0489, 0xe042) },
{ USB_DEVICE(0x413c, 0x8197) },
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 43/88] virtio_blk: Drop unused request tracking list
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (40 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 42/88] Bluetooth: Add support for BCM20702A0 [0b05, 17cb] Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 44/88] virtio-blk: Fix hot-unplug race in remove method Greg Kroah-Hartman
` (45 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Asias He, Rusty Russell,
Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asias He <asias@redhat.com>
commit f65ca1dc6a8c81c6bd72297d4399ec5f4c1f3a01 upstream.
Benchmark shows small performance improvement on fusion io device.
Before:
seq-read : io=1,024MB, bw=19,982KB/s, iops=39,964, runt= 52475msec
seq-write: io=1,024MB, bw=20,321KB/s, iops=40,641, runt= 51601msec
rnd-read : io=1,024MB, bw=15,404KB/s, iops=30,808, runt= 68070msec
rnd-write: io=1,024MB, bw=14,776KB/s, iops=29,552, runt= 70963msec
After:
seq-read : io=1,024MB, bw=20,343KB/s, iops=40,685, runt= 51546msec
seq-write: io=1,024MB, bw=20,803KB/s, iops=41,606, runt= 50404msec
rnd-read : io=1,024MB, bw=16,221KB/s, iops=32,442, runt= 64642msec
rnd-write: io=1,024MB, bw=15,199KB/s, iops=30,397, runt= 68991msec
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/virtio_blk.c | 10 ----------
1 file changed, 10 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -27,9 +27,6 @@ struct virtio_blk
/* The disk structure for the kernel. */
struct gendisk *disk;
- /* Request tracking. */
- struct list_head reqs;
-
mempool_t *pool;
/* Process context for config space updates */
@@ -53,7 +50,6 @@ struct virtio_blk
struct virtblk_req
{
- struct list_head list;
struct request *req;
struct virtio_blk_outhdr out_hdr;
struct virtio_scsi_inhdr in_hdr;
@@ -97,7 +93,6 @@ static void blk_done(struct virtqueue *v
}
__blk_end_request_all(vbr->req, error);
- list_del(&vbr->list);
mempool_free(vbr, vblk->pool);
}
/* In case queue is stopped waiting for more buffers. */
@@ -182,7 +177,6 @@ static bool do_req(struct request_queue
return false;
}
- list_add_tail(&vbr->list, &vblk->reqs);
return true;
}
@@ -435,7 +429,6 @@ static int __devinit virtblk_probe(struc
goto out_free_index;
}
- INIT_LIST_HEAD(&vblk->reqs);
vblk->vdev = vdev;
vblk->sg_elems = sg_elems;
sg_init_table(vblk->sg, vblk->sg_elems);
@@ -586,9 +579,6 @@ static void __devexit virtblk_remove(str
vblk->config_enable = false;
mutex_unlock(&vblk->config_lock);
- /* Nothing should be pending. */
- BUG_ON(!list_empty(&vblk->reqs));
-
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 44/88] virtio-blk: Fix hot-unplug race in remove method
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (41 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 43/88] virtio_blk: Drop unused request tracking list Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` Greg Kroah-Hartman
` (44 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Asias He, Rusty Russell,
Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asias He <asias@redhat.com>
commit b79d866c8b7014a51f611a64c40546109beaf24a upstream.
If we reset the virtio-blk device before the requests already dispatched
to the virtio-blk driver from the block layer are finised, we will stuck
in blk_cleanup_queue() and the remove will fail.
blk_cleanup_queue() calls blk_drain_queue() to drain all requests queued
before DEAD marking. However it will never success if the device is
already stopped. We'll have q->in_flight[] > 0, so the drain will not
finish.
How to reproduce the race:
1. hot-plug a virtio-blk device
2. keep reading/writing the device in guest
3. hot-unplug while the device is busy serving I/O
Test:
~1000 rounds of hot-plug/hot-unplug test passed with this patch.
Changes in v3:
- Drop blk_abort_queue and blk_abort_request
- Use __blk_end_request_all to complete request dispatched to driver
Changes in v2:
- Drop req_in_flight
- Use virtqueue_detach_unused_buf to get request dispatched to driver
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/virtio_blk.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -573,6 +573,8 @@ static void __devexit virtblk_remove(str
{
struct virtio_blk *vblk = vdev->priv;
int index = vblk->index;
+ struct virtblk_req *vbr;
+ unsigned long flags;
/* Prevent config work handler from accessing the device. */
mutex_lock(&vblk->config_lock);
@@ -585,6 +587,15 @@ static void __devexit virtblk_remove(str
flush_work(&vblk->config_work);
del_gendisk(vblk->disk);
+
+ /* Abort requests dispatched to driver. */
+ spin_lock_irqsave(&vblk->lock, flags);
+ while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {
+ __blk_end_request_all(vbr->req, -EIO);
+ mempool_free(vbr, vblk->pool);
+ }
+ spin_unlock_irqrestore(&vblk->lock, flags);
+
blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 45/88] virtio-blk: Call del_gendisk() before disable guest kick
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 02/88] perf: Prevent false warning in perf_swevent_add Greg Kroah-Hartman
` (86 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, virtualization, kvm, Asias He,
Michael S. Tsirkin, Rusty Russell, Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asias He <asias@redhat.com>
commit 02e2b124943648fba0a2ccee5c3656a5653e0151 upstream.
del_gendisk() might not return due to failing to remove the
/sys/block/vda/serial sysfs entry when another thread (udev) is
trying to read it.
virtblk_remove()
vdev->config->reset() : guest will not kick us through interrupt
del_gendisk()
device_del()
kobject_del(): got stuck, sysfs entry ref count non zero
sysfs_open_file(): user space process read /sys/block/vda/serial
sysfs_get_active() : got sysfs entry ref count
dev_attr_show()
virtblk_serial_show()
blk_execute_rq() : got stuck, interrupt is disabled
request cannot be finished
This patch fixes it by calling del_gendisk() before we disable guest's
interrupt so that the request sent in virtblk_serial_show() will be
finished and del_gendisk() will success.
This fixes another race in hot-unplug process.
It is save to call del_gendisk(vblk->disk) before
flush_work(&vblk->config_work) which might access vblk->disk, because
vblk->disk is not freed until put_disk(vblk->disk).
Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/virtio_blk.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -581,13 +581,13 @@ static void __devexit virtblk_remove(str
vblk->config_enable = false;
mutex_unlock(&vblk->config_lock);
+ del_gendisk(vblk->disk);
+
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
flush_work(&vblk->config_work);
- del_gendisk(vblk->disk);
-
/* Abort requests dispatched to driver. */
spin_lock_irqsave(&vblk->lock, flags);
while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 45/88] virtio-blk: Call del_gendisk() before disable guest kick
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
0 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: kvm, Michael S. Tsirkin, Greg Kroah-Hartman, stable,
virtualization, Yijing Wang, Asias He, Ben Hutchings
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asias He <asias@redhat.com>
commit 02e2b124943648fba0a2ccee5c3656a5653e0151 upstream.
del_gendisk() might not return due to failing to remove the
/sys/block/vda/serial sysfs entry when another thread (udev) is
trying to read it.
virtblk_remove()
vdev->config->reset() : guest will not kick us through interrupt
del_gendisk()
device_del()
kobject_del(): got stuck, sysfs entry ref count non zero
sysfs_open_file(): user space process read /sys/block/vda/serial
sysfs_get_active() : got sysfs entry ref count
dev_attr_show()
virtblk_serial_show()
blk_execute_rq() : got stuck, interrupt is disabled
request cannot be finished
This patch fixes it by calling del_gendisk() before we disable guest's
interrupt so that the request sent in virtblk_serial_show() will be
finished and del_gendisk() will success.
This fixes another race in hot-unplug process.
It is save to call del_gendisk(vblk->disk) before
flush_work(&vblk->config_work) which might access vblk->disk, because
vblk->disk is not freed until put_disk(vblk->disk).
Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/virtio_blk.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -581,13 +581,13 @@ static void __devexit virtblk_remove(str
vblk->config_enable = false;
mutex_unlock(&vblk->config_lock);
+ del_gendisk(vblk->disk);
+
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
flush_work(&vblk->config_work);
- del_gendisk(vblk->disk);
-
/* Abort requests dispatched to driver. */
spin_lock_irqsave(&vblk->lock, flags);
while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 46/88] virtio-blk: Reset device after blk_cleanup_queue()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 02/88] perf: Prevent false warning in perf_swevent_add Greg Kroah-Hartman
` (86 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rusty Russell, virtualization, kvm,
Asias He, Michael S. Tsirkin, Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asias He <asias@redhat.com>
commit 483001c765af6892b3fc3726576cb42f17d1d6b5 upstream.
blk_cleanup_queue() will call blk_drian_queue() to drain all the
requests before queue DEAD marking. If we reset the device before
blk_cleanup_queue() the drain would fail.
1) if the queue is stopped in do_virtblk_request() because device is
full, the q->request_fn() will not be called.
blk_drain_queue() {
while(true) {
...
if (!list_empty(&q->queue_head))
__blk_run_queue(q) {
if (queue is not stoped)
q->request_fn()
}
...
}
}
Do no reset the device before blk_cleanup_queue() gives the chance to
start the queue in interrupt handler blk_done().
2) In commit b79d866c8b7014a51f611a64c40546109beaf24a, We abort requests
dispatched to driver before blk_cleanup_queue(). There is a race if
requests are dispatched to driver after the abort and before the queue
DEAD mark. To fix this, instead of aborting the requests explicitly, we
can just reset the device after after blk_cleanup_queue so that the
device can complete all the requests before queue DEAD marking in the
drain process.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/virtio_blk.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -573,8 +573,6 @@ static void __devexit virtblk_remove(str
{
struct virtio_blk *vblk = vdev->priv;
int index = vblk->index;
- struct virtblk_req *vbr;
- unsigned long flags;
/* Prevent config work handler from accessing the device. */
mutex_lock(&vblk->config_lock);
@@ -582,21 +580,13 @@ static void __devexit virtblk_remove(str
mutex_unlock(&vblk->config_lock);
del_gendisk(vblk->disk);
+ blk_cleanup_queue(vblk->disk->queue);
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
flush_work(&vblk->config_work);
- /* Abort requests dispatched to driver. */
- spin_lock_irqsave(&vblk->lock, flags);
- while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {
- __blk_end_request_all(vbr->req, -EIO);
- mempool_free(vbr, vblk->pool);
- }
- spin_unlock_irqrestore(&vblk->lock, flags);
-
- blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
vdev->config->del_vqs(vdev);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 46/88] virtio-blk: Reset device after blk_cleanup_queue()
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
0 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: kvm, Michael S. Tsirkin, Greg Kroah-Hartman, stable,
virtualization, Yijing Wang, Asias He, Ben Hutchings
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asias He <asias@redhat.com>
commit 483001c765af6892b3fc3726576cb42f17d1d6b5 upstream.
blk_cleanup_queue() will call blk_drian_queue() to drain all the
requests before queue DEAD marking. If we reset the device before
blk_cleanup_queue() the drain would fail.
1) if the queue is stopped in do_virtblk_request() because device is
full, the q->request_fn() will not be called.
blk_drain_queue() {
while(true) {
...
if (!list_empty(&q->queue_head))
__blk_run_queue(q) {
if (queue is not stoped)
q->request_fn()
}
...
}
}
Do no reset the device before blk_cleanup_queue() gives the chance to
start the queue in interrupt handler blk_done().
2) In commit b79d866c8b7014a51f611a64c40546109beaf24a, We abort requests
dispatched to driver before blk_cleanup_queue(). There is a race if
requests are dispatched to driver after the abort and before the queue
DEAD mark. To fix this, instead of aborting the requests explicitly, we
can just reset the device after after blk_cleanup_queue so that the
device can complete all the requests before queue DEAD marking in the
drain process.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/virtio_blk.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -573,8 +573,6 @@ static void __devexit virtblk_remove(str
{
struct virtio_blk *vblk = vdev->priv;
int index = vblk->index;
- struct virtblk_req *vbr;
- unsigned long flags;
/* Prevent config work handler from accessing the device. */
mutex_lock(&vblk->config_lock);
@@ -582,21 +580,13 @@ static void __devexit virtblk_remove(str
mutex_unlock(&vblk->config_lock);
del_gendisk(vblk->disk);
+ blk_cleanup_queue(vblk->disk->queue);
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
flush_work(&vblk->config_work);
- /* Abort requests dispatched to driver. */
- spin_lock_irqsave(&vblk->lock, flags);
- while ((vbr = virtqueue_detach_unused_buf(vblk->vq))) {
- __blk_end_request_all(vbr->req, -EIO);
- mempool_free(vbr, vblk->pool);
- }
- spin_unlock_irqrestore(&vblk->lock, flags);
-
- blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
vdev->config->del_vqs(vdev);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 47/88] mm: add kmap_to_page()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (44 preceding siblings ...)
2014-06-10 0:24 ` Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 1:15 ` Hugh Dickins
2014-06-10 0:24 ` [PATCH 3.4 48/88] mm: highmem: export kmap_to_page for modules Greg Kroah-Hartman
` (41 subsequent siblings)
87 siblings, 1 reply; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mel Gorman, Rik van Riel,
Andrew Morton, Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <ben@decadent.org.uk>
commit fcb8996728fb59eddf84678df7cb213b2c9a2e26 upstream.
This is extracted from Mel Gorman's commit 5a178119b0fb ('mm: add
support for direct_IO to highmem pages') upstream.
Required to backport commit b9cdc88df8e6 ('virtio: 9p: correctly pass
physical address to userspace for high pages').
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/highmem.h | 7 +++++++
mm/highmem.c | 12 ++++++++++++
2 files changed, 19 insertions(+)
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -39,10 +39,17 @@ extern unsigned long totalhigh_pages;
void kmap_flush_unused(void);
+struct page *kmap_to_page(void *addr);
+
#else /* CONFIG_HIGHMEM */
static inline unsigned int nr_free_highpages(void) { return 0; }
+static inline struct page *kmap_to_page(void *addr)
+{
+ return virt_to_page(addr);
+}
+
#define totalhigh_pages 0UL
#ifndef ARCH_HAS_KMAP
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -94,6 +94,18 @@ static DECLARE_WAIT_QUEUE_HEAD(pkmap_map
do { spin_unlock(&kmap_lock); (void)(flags); } while (0)
#endif
+struct page *kmap_to_page(void *vaddr)
+{
+ unsigned long addr = (unsigned long)vaddr;
+
+ if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
+ int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
+ return pte_page(pkmap_page_table[i]);
+ }
+
+ return virt_to_page(addr);
+}
+
static void flush_all_zero_pkmaps(void)
{
int i;
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 48/88] mm: highmem: export kmap_to_page for modules
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (45 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 47/88] mm: add kmap_to_page() Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 49/88] virtio: 9p: correctly pass physical address to userspace for high pages Greg Kroah-Hartman
` (40 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, Rusty Russell,
Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <will.deacon@arm.com>
commit f0263d2d222e9e25f2587e51a9dc58c6fb2a9352 upstream.
Some virtio device drivers (9p) need to translate high virtual addresses
to physical addresses, which are inserted into the virtqueue for
processing by userspace.
This patch exports the kmap_to_page symbol, so that the affected drivers
can be compiled as modules.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/highmem.c | 1 +
1 file changed, 1 insertion(+)
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -105,6 +105,7 @@ struct page *kmap_to_page(void *vaddr)
return virt_to_page(addr);
}
+EXPORT_SYMBOL(kmap_to_page);
static void flush_all_zero_pkmaps(void)
{
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 49/88] virtio: 9p: correctly pass physical address to userspace for high pages
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (46 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 48/88] mm: highmem: export kmap_to_page for modules Greg Kroah-Hartman
@ 2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 50/88] virtio-blk: Dont free ida when disk is in use Greg Kroah-Hartman
` (39 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:24 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sasha Levin, Will Deacon,
Rusty Russell, Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <will.deacon@arm.com>
commit 30d395b124c51db66d9f3ba0611cd62021afc392 upstream.
commit b9cdc88df8e63e81c723b82c286fc97f5d0dc325 upstream.
When using a virtio transport, the 9p net device may pass the physical
address of a kernel buffer to userspace via a scatterlist inside a
virtqueue. If the kernel buffer is mapped outside of the linear mapping
(e.g. highmem), then virt_to_page will return a bogus value and we will
populate the scatterlist with junk.
This patch uses kmap_to_page when populating the page array for a kernel
buffer.
Cc: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/9p/trans_virtio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -39,6 +39,7 @@
#include <linux/inet.h>
#include <linux/idr.h>
#include <linux/file.h>
+#include <linux/highmem.h>
#include <linux/slab.h>
#include <net/9p/9p.h>
#include <linux/parser.h>
@@ -325,7 +326,7 @@ static int p9_get_mapped_pages(struct vi
int count = nr_pages;
while (nr_pages) {
s = rest_of_page(data);
- pages[index++] = virt_to_page(data);
+ pages[index++] = kmap_to_page(data);
data += s;
nr_pages--;
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 50/88] virtio-blk: Dont free ida when disk is in use
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (47 preceding siblings ...)
2014-06-10 0:24 ` [PATCH 3.4 49/88] virtio: 9p: correctly pass physical address to userspace for high pages Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 51/88] virtio_console: fix uapi header Greg Kroah-Hartman
` (38 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Graf, Rusty Russell,
Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Graf <agraf@suse.de>
commit f4953fe6c4aeada2d5cafd78aa97587a46d2d8f9 upstream.
When a file system is mounted on a virtio-blk disk, we then remove it
and then reattach it, the reattached disk gets the same disk name and
ids as the hot removed one.
This leads to very nasty effects - mostly rendering the newly attached
device completely unusable.
Trying what happens when I do the same thing with a USB device, I saw
that the sd node simply doesn't get free'd when a device gets forcefully
removed.
Imitate the same behavior for vd devices. This way broken vd devices
simply are never free'd and newly attached ones keep working just fine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/virtio_blk.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -573,6 +573,7 @@ static void __devexit virtblk_remove(str
{
struct virtio_blk *vblk = vdev->priv;
int index = vblk->index;
+ int refc;
/* Prevent config work handler from accessing the device. */
mutex_lock(&vblk->config_lock);
@@ -587,11 +588,15 @@ static void __devexit virtblk_remove(str
flush_work(&vblk->config_work);
+ refc = atomic_read(&disk_to_dev(vblk->disk)->kobj.kref.refcount);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
vdev->config->del_vqs(vdev);
kfree(vblk);
- ida_simple_remove(&vd_index_ida, index);
+
+ /* Only free device id if we don't have any users */
+ if (refc == 1)
+ ida_simple_remove(&vd_index_ida, index);
}
#ifdef CONFIG_PM
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 51/88] virtio_console: fix uapi header
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (48 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 50/88] virtio-blk: Dont free ida when disk is in use Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 52/88] virtio: console: rename cvq_lock to c_ivq_lock Greg Kroah-Hartman
` (37 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael S. Tsirkin, Rusty Russell,
Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <mst@redhat.com>
commit 6407d75afd08545f2252bb39806ffd3f10c7faac upstream.
uapi should use __u32 not u32.
Fix a macro in virtio_console.h which uses u32.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/virtio_console.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -39,7 +39,7 @@
#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
-#define VIRTIO_CONSOLE_BAD_ID (~(u32)0)
+#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0)
struct virtio_console_config {
/* colums of the screens */
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 52/88] virtio: console: rename cvq_lock to c_ivq_lock
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (49 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 51/88] virtio_console: fix uapi header Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 53/88] virtio: console: add locking around c_ovq operations Greg Kroah-Hartman
` (36 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Amit Shah, Asias He, Wanlong Gao,
Rusty Russell, Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amit Shah <amit.shah@redhat.com>
commit 165b1b8bbc17c9469b053bab78b11b7cbce6d161 upstream.
The cvq_lock was taken for the c_ivq. Rename the lock to make that
obvious.
We'll also add a lock around the c_ovq in the next commit, so there's no
ambiguity.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2:
- Adjust context
- Drop change to virtcons_restore()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[wyj: Backported to 3.4:
- pick change to virtcons_restore() from upsteam patch]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/virtio_console.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -131,7 +131,7 @@ struct ports_device {
spinlock_t ports_lock;
/* To protect the vq operations for the control channel */
- spinlock_t cvq_lock;
+ spinlock_t c_ivq_lock;
/* The current config space is stored here */
struct virtio_console_config config;
@@ -1474,23 +1474,23 @@ static void control_work_handler(struct
portdev = container_of(work, struct ports_device, control_work);
vq = portdev->c_ivq;
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
while ((buf = virtqueue_get_buf(vq, &len))) {
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
buf->len = len;
buf->offset = 0;
handle_control_message(portdev, buf);
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
if (add_inbuf(portdev->c_ivq, buf) < 0) {
dev_warn(&portdev->vdev->dev,
"Error adding buffer to queue\n");
free_buf(buf);
}
}
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
}
static void out_intr(struct virtqueue *vq)
@@ -1751,10 +1751,11 @@ static int __devinit virtcons_probe(stru
if (multiport) {
unsigned int nr_added_bufs;
- spin_lock_init(&portdev->cvq_lock);
+ spin_lock_init(&portdev->c_ivq_lock);
INIT_WORK(&portdev->control_work, &control_work_handler);
- nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ nr_added_bufs = fill_queue(portdev->c_ivq,
+ &portdev->c_ivq_lock);
if (!nr_added_bufs) {
dev_err(&vdev->dev,
"Error allocating buffers for control queue\n");
@@ -1895,7 +1896,7 @@ static int virtcons_restore(struct virti
return ret;
if (use_multiport(portdev))
- fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);
list_for_each_entry(port, &portdev->ports, list) {
port->in_vq = portdev->in_vqs[port->id];
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 53/88] virtio: console: add locking around c_ovq operations
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (50 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 52/88] virtio: console: rename cvq_lock to c_ivq_lock Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 54/88] nfsd: pass net to nfsd_init_socks() Greg Kroah-Hartman
` (35 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, FuXiangChun, Amit Shah, Wanlong Gao,
Asias He, Rusty Russell, Ben Hutchings, Yijing Wang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amit Shah <amit.shah@redhat.com>
commit 9ba5c80b1aea8648a3efe5f22dc1f7cacdfbeeb8 upstream.
When multiple ovq operations are being performed (lots of open/close
operations on virtio_console fds), the __send_control_msg() function can
get confused without locking.
A simple recipe to cause badness is:
* create a QEMU VM with two virtio-serial ports
* in the guest, do
while true;do echo abc >/dev/vport0p1;done
while true;do echo edf >/dev/vport0p2;done
In one run, this caused a panic in __send_control_msg(). In another, I
got
virtio_console virtio0: control-o:id 0 is not a head!
This also results repeated messages similar to these on the host:
qemu-kvm: virtio-serial-bus: Unexpected port id 478762112 for device virtio-serial-bus.0
qemu-kvm: virtio-serial-bus: Unexpected port id 478762368 for device virtio-serial-bus.0
Reported-by: FuXiangChun <xfu@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[wyj: Backported to 3.4: adjust context]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/virtio_console.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -132,6 +132,7 @@ struct ports_device {
/* To protect the vq operations for the control channel */
spinlock_t c_ivq_lock;
+ spinlock_t c_ovq_lock;
/* The current config space is stored here */
struct virtio_console_config config;
@@ -460,11 +461,14 @@ static ssize_t __send_control_msg(struct
vq = portdev->c_ovq;
sg_init_one(sg, &cpkt, sizeof(cpkt));
+
+ spin_lock(&portdev->c_ovq_lock);
if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) >= 0) {
virtqueue_kick(vq);
while (!virtqueue_get_buf(vq, &len))
cpu_relax();
}
+ spin_unlock(&portdev->c_ovq_lock);
return 0;
}
@@ -1752,6 +1756,7 @@ static int __devinit virtcons_probe(stru
unsigned int nr_added_bufs;
spin_lock_init(&portdev->c_ivq_lock);
+ spin_lock_init(&portdev->c_ovq_lock);
INIT_WORK(&portdev->control_work, &control_work_handler);
nr_added_bufs = fill_queue(portdev->c_ivq,
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 54/88] nfsd: pass net to nfsd_init_socks()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (51 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 53/88] virtio: console: add locking around c_ovq operations Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 55/88] nfsd: pass net to nfsd_startup() and nfsd_shutdown() Greg Kroah-Hartman
` (34 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit db6e182c17cb1a7069f7f8924721ce58ac05d9a3 upstream.
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4:
- adjust context
- one more parameter(int port) for nfsd_init_socks()
- net initialization in nfsd_startup()]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfssvc.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -182,18 +182,18 @@ int nfsd_nrthreads(void)
return rv;
}
-static int nfsd_init_socks(int port)
+static int nfsd_init_socks(int port, struct net *net)
{
int error;
if (!list_empty(&nfsd_serv->sv_permsocks))
return 0;
- error = svc_create_xprt(nfsd_serv, "udp", &init_net, PF_INET, port,
+ error = svc_create_xprt(nfsd_serv, "udp", net, PF_INET, port,
SVC_SOCK_DEFAULTS);
if (error < 0)
return error;
- error = svc_create_xprt(nfsd_serv, "tcp", &init_net, PF_INET, port,
+ error = svc_create_xprt(nfsd_serv, "tcp", net, PF_INET, port,
SVC_SOCK_DEFAULTS);
if (error < 0)
return error;
@@ -206,6 +206,7 @@ static bool nfsd_up = false;
static int nfsd_startup(unsigned short port, int nrservs)
{
int ret;
+ struct net *net = &init_net;
if (nfsd_up)
return 0;
@@ -217,7 +218,7 @@ static int nfsd_startup(unsigned short p
ret = nfsd_racache_init(2*nrservs);
if (ret)
return ret;
- ret = nfsd_init_socks(port);
+ ret = nfsd_init_socks(port, net);
if (ret)
goto out_racache;
ret = lockd_up(&init_net);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 55/88] nfsd: pass net to nfsd_startup() and nfsd_shutdown()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (52 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 54/88] nfsd: pass net to nfsd_init_socks() Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 56/88] nfsd: pass net to nfsd_create_serv() Greg Kroah-Hartman
` (33 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit db42d1a76a8dfcaba7a2dc9c591fa4e231db22b3 upstream.
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4:
- adjust context
- one more parameter(int port) for nfsd_startup()
- no net ns initialization in nfsd_shutdown()
- pass @net to lockd_up() in nfsd_startup()
- pass @net to lockd_down() in nfsd_shutdown()]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfssvc.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -203,10 +203,9 @@ static int nfsd_init_socks(int port, str
static bool nfsd_up = false;
-static int nfsd_startup(unsigned short port, int nrservs)
+static int nfsd_startup(unsigned short port, int nrservs, struct net *net)
{
int ret;
- struct net *net = &init_net;
if (nfsd_up)
return 0;
@@ -221,7 +220,7 @@ static int nfsd_startup(unsigned short p
ret = nfsd_init_socks(port, net);
if (ret)
goto out_racache;
- ret = lockd_up(&init_net);
+ ret = lockd_up(net);
if (ret)
goto out_racache;
ret = nfs4_state_start();
@@ -230,13 +229,13 @@ static int nfsd_startup(unsigned short p
nfsd_up = true;
return 0;
out_lockd:
- lockd_down(&init_net);
+ lockd_down(net);
out_racache:
nfsd_racache_shutdown();
return ret;
}
-static void nfsd_shutdown(void)
+static void nfsd_shutdown(struct net *net)
{
/*
* write_ports can create the server without actually starting
@@ -247,14 +246,14 @@ static void nfsd_shutdown(void)
if (!nfsd_up)
return;
nfs4_state_shutdown();
- lockd_down(&init_net);
+ lockd_down(net);
nfsd_racache_shutdown();
nfsd_up = false;
}
static void nfsd_last_thread(struct svc_serv *serv, struct net *net)
{
- nfsd_shutdown();
+ nfsd_shutdown(net);
svc_rpcb_cleanup(serv, net);
@@ -458,7 +457,7 @@ nfsd_svc(unsigned short port, int nrserv
nfsd_up_before = nfsd_up;
- error = nfsd_startup(port, nrservs);
+ error = nfsd_startup(port, nrservs, net);
if (error)
goto out_destroy;
error = svc_set_num_threads(nfsd_serv, NULL, nrservs);
@@ -471,7 +470,7 @@ nfsd_svc(unsigned short port, int nrserv
error = nfsd_serv->sv_nrthreads - 1;
out_shutdown:
if (error < 0 && !nfsd_up_before)
- nfsd_shutdown();
+ nfsd_shutdown(net);
out_destroy:
nfsd_destroy(net); /* Release server */
out:
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 56/88] nfsd: pass net to nfsd_create_serv()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (53 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 55/88] nfsd: pass net to nfsd_startup() and nfsd_shutdown() Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 57/88] nfsd: pass net to nfsd_svc() Greg Kroah-Hartman
` (32 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit 6777436b0f072fb20a025a73e9b67a35ad8a5451 upstream.
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4: adjust context]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfsctl.c | 4 ++--
fs/nfsd/nfsd.h | 2 +-
fs/nfsd/nfssvc.c | 5 ++---
3 files changed, 5 insertions(+), 6 deletions(-)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -657,7 +657,7 @@ static ssize_t __write_ports_addfd(char
if (err != 0 || fd < 0)
return -EINVAL;
- err = nfsd_create_serv();
+ err = nfsd_create_serv(net);
if (err != 0)
return err;
@@ -708,7 +708,7 @@ static ssize_t __write_ports_addxprt(cha
if (port < 1 || port > USHRT_MAX)
return -EINVAL;
- err = nfsd_create_serv();
+ err = nfsd_create_serv(net);
if (err != 0)
return err;
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -101,7 +101,7 @@ enum vers_op {NFSD_SET, NFSD_CLEAR, NFSD
int nfsd_vers(int vers, enum vers_op change);
int nfsd_minorversion(u32 minorversion, enum vers_op change);
void nfsd_reset_versions(void);
-int nfsd_create_serv(void);
+int nfsd_create_serv(struct net *net);
extern int nfsd_max_blksize;
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -326,10 +326,9 @@ static int nfsd_get_default_max_blksize(
return ret;
}
-int nfsd_create_serv(void)
+int nfsd_create_serv(struct net *net)
{
int error;
- struct net *net = &init_net;
WARN_ON(!mutex_is_locked(&nfsd_mutex));
if (nfsd_serv) {
@@ -451,7 +450,7 @@ nfsd_svc(unsigned short port, int nrserv
if (nrservs == 0 && nfsd_serv == NULL)
goto out;
- error = nfsd_create_serv();
+ error = nfsd_create_serv(net);
if (error)
goto out;
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 57/88] nfsd: pass net to nfsd_svc()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (54 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 56/88] nfsd: pass net to nfsd_create_serv() Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 58/88] nfsd: pass net to nfsd_set_nrthreads() Greg Kroah-Hartman
` (31 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit d41a9417cd89a69f58a26935034b4264a2d882d6 upstream.
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4:
- adjust context
- one more parameter(int port) for nfsd_svc()]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfsctl.c | 4 +++-
fs/nfsd/nfsd.h | 2 +-
fs/nfsd/nfssvc.c | 3 +--
3 files changed, 5 insertions(+), 4 deletions(-)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -389,6 +389,8 @@ static ssize_t write_threads(struct file
{
char *mesg = buf;
int rv;
+ struct net *net = &init_net;
+
if (size > 0) {
int newthreads;
rv = get_int(&mesg, &newthreads);
@@ -396,7 +398,7 @@ static ssize_t write_threads(struct file
return rv;
if (newthreads < 0)
return -EINVAL;
- rv = nfsd_svc(NFS_PORT, newthreads);
+ rv = nfsd_svc(NFS_PORT, newthreads, net);
if (rv < 0)
return rv;
} else
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -65,7 +65,7 @@ extern const struct seq_operations nfs_e
/*
* Function prototypes.
*/
-int nfsd_svc(unsigned short port, int nrservs);
+int nfsd_svc(unsigned short port, int nrservs, struct net *net);
int nfsd_dispatch(struct svc_rqst *rqstp, __be32 *statp);
int nfsd_nrthreads(void);
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -434,11 +434,10 @@ int nfsd_set_nrthreads(int n, int *nthre
* this is the first time nrservs is nonzero.
*/
int
-nfsd_svc(unsigned short port, int nrservs)
+nfsd_svc(unsigned short port, int nrservs, struct net *net)
{
int error;
bool nfsd_up_before;
- struct net *net = &init_net;
mutex_lock(&nfsd_mutex);
dprintk("nfsd: creating service\n");
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 58/88] nfsd: pass net to nfsd_set_nrthreads()
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (55 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 57/88] nfsd: pass net to nfsd_svc() Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 59/88] nfsd: pass net to __write_ports() and down Greg Kroah-Hartman
` (30 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit 3938a0d5eb5effcc89c6909741403f4e6a37252d upstream.
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4: adjust context]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfsctl.c | 3 ++-
fs/nfsd/nfsd.h | 2 +-
fs/nfsd/nfssvc.c | 3 +--
3 files changed, 4 insertions(+), 4 deletions(-)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -440,6 +440,7 @@ static ssize_t write_pool_threads(struct
int len;
int npools;
int *nthreads;
+ struct net *net = &init_net;
mutex_lock(&nfsd_mutex);
npools = nfsd_nrpools();
@@ -470,7 +471,7 @@ static ssize_t write_pool_threads(struct
if (nthreads[i] < 0)
goto out_free;
}
- rv = nfsd_set_nrthreads(i, nthreads);
+ rv = nfsd_set_nrthreads(i, nthreads, net);
if (rv)
goto out_free;
}
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -71,7 +71,7 @@ int nfsd_dispatch(struct svc_rqst *rqst
int nfsd_nrthreads(void);
int nfsd_nrpools(void);
int nfsd_get_nrthreads(int n, int *);
-int nfsd_set_nrthreads(int n, int *);
+int nfsd_set_nrthreads(int n, int *, struct net *);
static inline void nfsd_destroy(struct net *net)
{
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -374,12 +374,11 @@ int nfsd_get_nrthreads(int n, int *nthre
return 0;
}
-int nfsd_set_nrthreads(int n, int *nthreads)
+int nfsd_set_nrthreads(int n, int *nthreads, struct net *net)
{
int i = 0;
int tot = 0;
int err = 0;
- struct net *net = &init_net;
WARN_ON(!mutex_is_locked(&nfsd_mutex));
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 59/88] nfsd: pass net to __write_ports() and down
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (56 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 58/88] nfsd: pass net to nfsd_set_nrthreads() Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 60/88] nfsd: pass proper net to nfsd_destroy() from NFSd kthreads Greg Kroah-Hartman
` (29 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit 081603520b25f7b35ef63a363376a17c36ef74ed upstream.
Precursor patch. Hard-coded "init_net" will be replaced by proper one in
future.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4:
- adjust context
- add net_ns parameter to __write_ports_delxprt()]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfsctl.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -650,11 +650,10 @@ static ssize_t __write_ports_names(char
* a socket of a supported family/protocol, and we use it as an
* nfsd listener.
*/
-static ssize_t __write_ports_addfd(char *buf)
+static ssize_t __write_ports_addfd(char *buf, struct net *net)
{
char *mesg = buf;
int fd, err;
- struct net *net = &init_net;
err = get_int(&mesg, &fd);
if (err != 0 || fd < 0)
@@ -698,12 +697,11 @@ static ssize_t __write_ports_delfd(char
* A transport listener is added by writing it's transport name and
* a port number.
*/
-static ssize_t __write_ports_addxprt(char *buf)
+static ssize_t __write_ports_addxprt(char *buf, struct net *net)
{
char transport[16];
struct svc_xprt *xprt;
int port, err;
- struct net *net = &init_net;
if (sscanf(buf, "%15s %4u", transport, &port) != 2)
return -EINVAL;
@@ -743,7 +741,7 @@ out_err:
* A transport listener is removed by writing a "-", it's transport
* name, and it's port number.
*/
-static ssize_t __write_ports_delxprt(char *buf)
+static ssize_t __write_ports_delxprt(char *buf, struct net *net)
{
struct svc_xprt *xprt;
char transport[16];
@@ -755,7 +753,7 @@ static ssize_t __write_ports_delxprt(cha
if (port < 1 || port > USHRT_MAX || nfsd_serv == NULL)
return -EINVAL;
- xprt = svc_find_xprt(nfsd_serv, transport, &init_net, AF_UNSPEC, port);
+ xprt = svc_find_xprt(nfsd_serv, transport, net, AF_UNSPEC, port);
if (xprt == NULL)
return -ENOTCONN;
@@ -764,22 +762,23 @@ static ssize_t __write_ports_delxprt(cha
return 0;
}
-static ssize_t __write_ports(struct file *file, char *buf, size_t size)
+static ssize_t __write_ports(struct file *file, char *buf, size_t size,
+ struct net *net)
{
if (size == 0)
return __write_ports_names(buf);
if (isdigit(buf[0]))
- return __write_ports_addfd(buf);
+ return __write_ports_addfd(buf, net);
if (buf[0] == '-' && isdigit(buf[1]))
return __write_ports_delfd(buf);
if (isalpha(buf[0]))
- return __write_ports_addxprt(buf);
+ return __write_ports_addxprt(buf, net);
if (buf[0] == '-' && isalpha(buf[1]))
- return __write_ports_delxprt(buf);
+ return __write_ports_delxprt(buf, net);
return -EINVAL;
}
@@ -858,9 +857,10 @@ static ssize_t __write_ports(struct file
static ssize_t write_ports(struct file *file, char *buf, size_t size)
{
ssize_t rv;
+ struct net *net = &init_net;
mutex_lock(&nfsd_mutex);
- rv = __write_ports(file, buf, size);
+ rv = __write_ports(file, buf, size, net);
mutex_unlock(&nfsd_mutex);
return rv;
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 60/88] nfsd: pass proper net to nfsd_destroy() from NFSd kthreads
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (57 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 59/88] nfsd: pass net to __write_ports() and down Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 61/88] nfsd: containerize NFSd filesystem Greg Kroah-Hartman
` (28 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit 88c47666171989ed4c5b1a5687df09511e8c5e35 upstream.
Since NFSd service is per-net now, we have to pass proper network
context in nfsd_shutdown() from NFSd kthreads.
The simplest way I found is to get proper net from one of transports
with permanent sockets.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4: adjust context]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfssvc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -483,6 +483,8 @@ static int
nfsd(void *vrqstp)
{
struct svc_rqst *rqstp = (struct svc_rqst *) vrqstp;
+ struct svc_xprt *perm_sock = list_entry(rqstp->rq_server->sv_permsocks.next, typeof(struct svc_xprt), xpt_list);
+ struct net *net = perm_sock->xpt_net;
int err, preverr = 0;
/* Lock module and set up kernel thread */
@@ -557,7 +559,7 @@ out:
/* Release the thread */
svc_exit_thread(rqstp);
- nfsd_destroy(&init_net);
+ nfsd_destroy(net);
/* Release module */
mutex_unlock(&nfsd_mutex);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 61/88] nfsd: containerize NFSd filesystem
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (58 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 60/88] nfsd: pass proper net to nfsd_destroy() from NFSd kthreads Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 62/88] nfsd: check passed sockets net matches NFSd superblocks one Greg Kroah-Hartman
` (27 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stanislav Kinsbursky,
J. Bruce Fields, Weng Meiling
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
note: this backport is just for the null pointer problem when
start nfsd in none init netns. The nfsd is still not containerized.
commit 11f779421a39b86da8a523d97e5fd3477878d44f upstream.
This patch makes NFSD file system superblock to be created per net.
This makes possible to get proper network namespace from superblock instead of
using hard-coded "init_net".
Note: NFSd fs super-block holds network namespace. This garantees, that
network namespace won't disappear from underneath of it.
This, obviously, means, that in case of kill of a container's "init" (which is not a mount
namespace, but network namespace creator) netowrk namespace won't be
destroyed.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4:
- export cache not per netns
- NFSD service structure not per netns]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfsctl.c | 30 +++++++++++++++++++++++-------
fs/nfsd/nfssvc.c | 2 +-
2 files changed, 24 insertions(+), 8 deletions(-)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -213,6 +213,7 @@ static ssize_t write_unlock_ip(struct fi
struct sockaddr *sap = (struct sockaddr *)&address;
size_t salen = sizeof(address);
char *fo_path;
+ struct net *net = file->f_dentry->d_sb->s_fs_info;
/* sanity check */
if (size == 0)
@@ -225,7 +226,7 @@ static ssize_t write_unlock_ip(struct fi
if (qword_get(&buf, fo_path, size) < 0)
return -EINVAL;
- if (rpc_pton(&init_net, fo_path, size, sap, salen) == 0)
+ if (rpc_pton(net, fo_path, size, sap, salen) == 0)
return -EINVAL;
return nlmsvc_unlock_all_by_ip(sap);
@@ -389,7 +390,7 @@ static ssize_t write_threads(struct file
{
char *mesg = buf;
int rv;
- struct net *net = &init_net;
+ struct net *net = file->f_dentry->d_sb->s_fs_info;
if (size > 0) {
int newthreads;
@@ -440,7 +441,7 @@ static ssize_t write_pool_threads(struct
int len;
int npools;
int *nthreads;
- struct net *net = &init_net;
+ struct net *net = file->f_dentry->d_sb->s_fs_info;
mutex_lock(&nfsd_mutex);
npools = nfsd_nrpools();
@@ -857,7 +858,7 @@ static ssize_t __write_ports(struct file
static ssize_t write_ports(struct file *file, char *buf, size_t size)
{
ssize_t rv;
- struct net *net = &init_net;
+ struct net *net = file->f_dentry->d_sb->s_fs_info;
mutex_lock(&nfsd_mutex);
rv = __write_ports(file, buf, size, net);
@@ -1095,20 +1096,35 @@ static int nfsd_fill_super(struct super_
#endif
/* last one */ {""}
};
- return simple_fill_super(sb, 0x6e667364, nfsd_files);
+ struct net *net = data;
+ int ret;
+
+ ret = simple_fill_super(sb, 0x6e667364, nfsd_files);
+ if (ret)
+ return ret;
+ sb->s_fs_info = get_net(net);
+ return 0;
}
static struct dentry *nfsd_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
- return mount_single(fs_type, flags, data, nfsd_fill_super);
+ return mount_ns(fs_type, flags, current->nsproxy->net_ns, nfsd_fill_super);
+}
+
+static void nfsd_umount(struct super_block *sb)
+{
+ struct net *net = sb->s_fs_info;
+
+ kill_litter_super(sb);
+ put_net(net);
}
static struct file_system_type nfsd_fs_type = {
.owner = THIS_MODULE,
.name = "nfsd",
.mount = nfsd_mount,
- .kill_sb = kill_litter_super,
+ .kill_sb = nfsd_umount,
};
#ifdef CONFIG_PROC_FS
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -670,7 +670,7 @@ int nfsd_pool_stats_open(struct inode *i
int nfsd_pool_stats_release(struct inode *inode, struct file *file)
{
int ret = seq_release(inode, file);
- struct net *net = &init_net;
+ struct net *net = inode->i_sb->s_fs_info;
mutex_lock(&nfsd_mutex);
/* this function really, really should have been called svc_put() */
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 62/88] nfsd: check passed sockets net matches NFSd superblocks one
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (59 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 61/88] nfsd: containerize NFSd filesystem Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 63/88] isci: Fix a race condition in the SSP task management path Greg Kroah-Hartman
` (26 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Weng Meiling, Stanislav Kinsbursky,
J. Bruce Fields
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislav Kinsbursky <skinsbursky@parallels.com>
commit 3064639423c48d6e0eb9ecc27c512a58e38c6c57 upstream.
There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:
"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.
This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.
v2: Put socket on exit.
Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[wengmeiling: backport to 3.4: adjust context]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfsctl.c | 5 +++++
include/linux/sunrpc/svcsock.h | 1 +
net/sunrpc/svcsock.c | 16 ++++++++++++++++
3 files changed, 22 insertions(+)
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -660,6 +660,11 @@ static ssize_t __write_ports_addfd(char
if (err != 0 || fd < 0)
return -EINVAL;
+ if (svc_alien_sock(net, fd)) {
+ printk(KERN_ERR "%s: socket net is different to NFSd's one\n", __func__);
+ return -EINVAL;
+ }
+
err = nfsd_create_serv(net);
if (err != 0)
return err;
--- a/include/linux/sunrpc/svcsock.h
+++ b/include/linux/sunrpc/svcsock.h
@@ -42,6 +42,7 @@ void svc_sock_update_bufs(struct svc_se
int svc_sock_names(struct svc_serv *serv, char *buf,
const size_t buflen,
const char *toclose);
+bool svc_alien_sock(struct net *net, int fd);
int svc_addsock(struct svc_serv *serv, const int fd,
char *name_return, const size_t len);
void svc_init_xprt_sock(void);
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1441,6 +1441,22 @@ static struct svc_sock *svc_setup_socket
return svsk;
}
+bool svc_alien_sock(struct net *net, int fd)
+{
+ int err;
+ struct socket *sock = sockfd_lookup(fd, &err);
+ bool ret = false;
+
+ if (!sock)
+ goto out;
+ if (sock_net(sock->sk) != net)
+ ret = true;
+ sockfd_put(sock);
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(svc_alien_sock);
+
/**
* svc_addsock - add a listener socket to an RPC service
* @serv: pointer to RPC service to which to add a new listener
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 63/88] isci: Fix a race condition in the SSP task management path
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (60 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 62/88] nfsd: check passed sockets net matches NFSd superblocks one Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 64/88] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop Greg Kroah-Hartman
` (25 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jeff Skirvin, Lukasz Dorau,
James Bottomley, Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
commit 96f15f29038e58e1b0a96483e2b369ff446becf1 upstream.
This commit fixes a race condition in the isci driver abort task and SSP
device task management path. The race is caused when an I/O termination
in the SCU hardware is necessary because of an SSP target timeout condition,
and the check of the I/O end state races against the HW-termination-driven
end state. The failure of the race meant that no TMF was sent to the device
to clean-up the pending I/O.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Reviewed-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/isci/task.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -956,6 +956,7 @@ int isci_task_abort_task(struct sas_task
int ret = TMF_RESP_FUNC_FAILED;
unsigned long flags;
int perform_termination = 0;
+ int target_done_already = 0;
/* Get the isci_request reference from the task. Note that
* this check does not depend on the pending request list
@@ -970,9 +971,11 @@ int isci_task_abort_task(struct sas_task
/* If task is already done, the request isn't valid */
if (!(task->task_state_flags & SAS_TASK_STATE_DONE) &&
(task->task_state_flags & SAS_TASK_AT_INITIATOR) &&
- old_request)
+ old_request) {
isci_device = isci_lookup_device(task->dev);
-
+ target_done_already = test_bit(IREQ_COMPLETE_IN_TARGET,
+ &old_request->flags);
+ }
spin_unlock(&task->task_state_lock);
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
@@ -1031,7 +1034,7 @@ int isci_task_abort_task(struct sas_task
}
if (task->task_proto == SAS_PROTOCOL_SMP ||
sas_protocol_ata(task->task_proto) ||
- test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
+ target_done_already) {
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 64/88] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (61 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 63/88] isci: Fix a race condition in the SSP task management path Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 65/88] mpt2sas: Fix for issue Missing delay not getting set during system bootup Greg Kroah-Hartman
` (24 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sreekanth Reddy, James Bottomley,
Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
commit 6241f22ca12a26ee149cbe31b27bac97dbdc8bc4 upstream.
Modified device scan routine so each configuration page read breaks from the
while loop when the ioc_status is not equal to MPI2_IOCSTATUS_SUCCESS.
[jejb: checkpatch fixes]
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2; adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 118 ++++++++++++++++++++++++++++++++++-
1 file changed, 115 insertions(+), 3 deletions(-)
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -7039,11 +7039,14 @@ _scsih_scan_for_devices_after_reset(stru
struct _sas_device *sas_device;
struct _sas_node *expander_device;
static struct _raid_device *raid_device;
+ u8 retry_count;
printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
_scsih_sas_host_refresh(ioc);
+ printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n",
+ ioc->name);
/* expanders */
handle = 0xFFFF;
while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
@@ -7052,19 +7055,39 @@ _scsih_scan_for_devices_after_reset(stru
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
break;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
handle = le16_to_cpu(expander_pg0.DevHandle);
expander_device = mpt2sas_scsih_expander_find_by_sas_address(
ioc, le64_to_cpu(expander_pg0.SASAddress));
if (expander_device)
_scsih_refresh_expander_links(ioc, expander_device,
handle);
- else
+ else {
+ printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: "
+ "handle (0x%04x), sas_addr(0x%016llx)\n",
+ ioc->name, handle, (unsigned long long)
+ le64_to_cpu(expander_pg0.SASAddress));
_scsih_expander_add(ioc, handle);
+ printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: "
+ "handle (0x%04x), sas_addr(0x%016llx)\n",
+ ioc->name, handle, (unsigned long long)
+ le64_to_cpu(expander_pg0.SASAddress));
+ }
}
+ printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n",
+ ioc->name);
+
if (!ioc->ir_firmware)
goto skip_to_sas;
+ printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name);
/* phys disk */
phys_disk_num = 0xFF;
while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
@@ -7074,6 +7097,13 @@ _scsih_scan_for_devices_after_reset(stru
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
break;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:"
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
phys_disk_num = pd_pg0.PhysDiskNum;
handle = le16_to_cpu(pd_pg0.DevHandle);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
@@ -7083,17 +7113,46 @@ _scsih_scan_for_devices_after_reset(stru
&sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
handle) != 0)
continue;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
if (!_scsih_get_sas_address(ioc, parent_handle,
&sas_address)) {
+ printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: "
+ " handle (0x%04x), sas_addr(0x%016llx)\n",
+ ioc->name, handle, (unsigned long long)
+ le64_to_cpu(sas_device_pg0.SASAddress));
mpt2sas_transport_update_links(ioc, sas_address,
handle, sas_device_pg0.PhyNum,
MPI2_SAS_NEG_LINK_RATE_1_5);
set_bit(handle, ioc->pd_handles);
- _scsih_add_device(ioc, handle, 0, 1);
+ retry_count = 0;
+ /* This will retry adding the end device.
+ * _scsih_add_device() will decide on retries and
+ * return "1" when it should be retried
+ */
+ while (_scsih_add_device(ioc, handle, retry_count++,
+ 1)) {
+ ssleep(1);
+ }
+ printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: "
+ " handle (0x%04x), sas_addr(0x%016llx)\n",
+ ioc->name, handle, (unsigned long long)
+ le64_to_cpu(sas_device_pg0.SASAddress));
}
}
+ printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n",
+ ioc->name);
+
+ printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name);
/* volumes */
handle = 0xFFFF;
while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
@@ -7102,6 +7161,13 @@ _scsih_scan_for_devices_after_reset(stru
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
break;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
handle = le16_to_cpu(volume_pg1.DevHandle);
raid_device = _scsih_raid_device_find_by_wwid(ioc,
le64_to_cpu(volume_pg1.WWID));
@@ -7111,18 +7177,38 @@ _scsih_scan_for_devices_after_reset(stru
&volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
sizeof(Mpi2RaidVolPage0_t)))
continue;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
element.VolDevHandle = volume_pg1.DevHandle;
+ printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: "
+ " handle (0x%04x)\n", ioc->name,
+ volume_pg1.DevHandle);
_scsih_sas_volume_add(ioc, &element);
+ printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: "
+ " handle (0x%04x)\n", ioc->name,
+ volume_pg1.DevHandle);
}
}
+ printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n",
+ ioc->name);
+
skip_to_sas:
+ printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n",
+ ioc->name);
/* sas devices */
handle = 0xFFFF;
while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
@@ -7132,6 +7218,13 @@ _scsih_scan_for_devices_after_reset(stru
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
break;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:"
+ " ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, ioc_status,
+ le32_to_cpu(mpi_reply.IOCLogInfo));
+ break;
+ }
handle = le16_to_cpu(sas_device_pg0.DevHandle);
if (!(_scsih_is_end_device(
le32_to_cpu(sas_device_pg0.DeviceInfo))))
@@ -7142,12 +7235,31 @@ _scsih_scan_for_devices_after_reset(stru
continue;
parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
+ printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: "
+ "handle (0x%04x), sas_addr(0x%016llx)\n",
+ ioc->name, handle, (unsigned long long)
+ le64_to_cpu(sas_device_pg0.SASAddress));
mpt2sas_transport_update_links(ioc, sas_address, handle,
sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
- _scsih_add_device(ioc, handle, 0, 0);
+ retry_count = 0;
+ /* This will retry adding the end device.
+ * _scsih_add_device() will decide on retries and
+ * return "1" when it should be retried
+ */
+ while (_scsih_add_device(ioc, handle, retry_count++,
+ 0)) {
+ ssleep(1);
+ }
+ printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: "
+ "handle (0x%04x), sas_addr(0x%016llx)\n",
+ ioc->name, handle, (unsigned long long)
+ le64_to_cpu(sas_device_pg0.SASAddress));
}
}
+ printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n",
+ ioc->name);
+
printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 65/88] mpt2sas: Fix for issue Missing delay not getting set during system bootup
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (62 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 64/88] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 1:04 ` Ben Hutchings
2014-06-10 0:25 ` [PATCH 3.4 66/88] hpsa: gen8plus Smart Array IDs Greg Kroah-Hartman
` (23 subsequent siblings)
87 siblings, 1 reply; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sreekanth Reddy, James Bottomley,
Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Reddy, Sreekanth" <Sreekanth.Reddy@lsi.com>
commit 93cfcb8c998e3fe2c075fa61ab28f7b018e5049a upstream.
commit b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream.
Missing delay is not getting set properly. The reason is that it is not
defined in the same file from where it is being invoked. The fix is to move
the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/mpt2sas/mpt2sas_base.c | 13 +++----------
drivers/scsi/mpt2sas/mpt2sas_base.h | 3 +++
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 8 +++++++-
3 files changed, 13 insertions(+), 11 deletions(-)
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -80,10 +80,6 @@ static int msix_disable = -1;
module_param(msix_disable, int, 0);
MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
-static int missing_delay[2] = {-1, -1};
-module_param_array(missing_delay, int, NULL, 0);
-MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
-
static int mpt2sas_fwfault_debug;
MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
"and halt firmware - (default=0)");
@@ -2168,7 +2164,7 @@ _base_display_ioc_capabilities(struct MP
}
/**
- * _base_update_missing_delay - change the missing delay timers
+ * mpt2sas_base_update_missing_delay - change the missing delay timers
* @ioc: per adapter object
* @device_missing_delay: amount of time till device is reported missing
* @io_missing_delay: interval IO is returned when there is a missing device
@@ -2179,8 +2175,8 @@ _base_display_ioc_capabilities(struct MP
* delay, as well as the io missing delay. This should be called at driver
* load time.
*/
-static void
-_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+void
+mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
u16 device_missing_delay, u8 io_missing_delay)
{
u16 dmd, dmd_new, dmd_orignal;
@@ -4371,9 +4367,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPT
if (r)
goto out_free_resources;
- if (missing_delay[0] != -1 && missing_delay[1] != -1)
- _base_update_missing_delay(ioc, missing_delay[0],
- missing_delay[1]);
return 0;
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -1047,6 +1047,9 @@ void mpt2sas_base_validate_event_type(st
void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
+void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+ u16 device_missing_delay, u8 io_missing_delay);
+
int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
/* scsih shared API */
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -101,6 +101,10 @@ static ushort max_sectors = 0xFFFF;
module_param(max_sectors, ushort, 0);
MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767 default=32767");
+static int missing_delay[2] = {-1, -1};
+module_param_array(missing_delay, int, NULL, 0);
+MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+
/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
#define MPT2SAS_MAX_LUN (16895)
static int max_lun = MPT2SAS_MAX_LUN;
@@ -7351,7 +7355,9 @@ _firmware_event_work(struct work_struct
case MPT2SAS_PORT_ENABLE_COMPLETE:
ioc->start_scan = 0;
-
+ if (missing_delay[0] != -1 && missing_delay[1] != -1)
+ mpt2sas_base_update_missing_delay(ioc, missing_delay[0],
+ missing_delay[1]);
dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
"from worker thread\n", ioc->name));
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 66/88] hpsa: gen8plus Smart Array IDs
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (63 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 65/88] mpt2sas: Fix for issue Missing delay not getting set during system bootup Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 67/88] iscsi-target: Always send a response before terminating iSCSI connection Greg Kroah-Hartman
` (22 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Bottomley, Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Miller <mike.miller@hp.com>
commit fe0c9610bb68dd0aad1017456f5e3c31264d70c2 upstream.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/hpsa.c | 32 +++++++++++++++++++++++++-------
include/linux/pci_ids.h | 1 +
2 files changed, 26 insertions(+), 7 deletions(-)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -99,6 +99,15 @@ static const struct pci_device_id hpsa_p
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3354},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3355},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x3356},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1920},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1921},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1922},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1923},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1924},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1925},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1926},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1928},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x334d},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
@@ -118,13 +127,22 @@ static struct board_type products[] = {
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324a103C, "Smart Array P712m", &SA5_access},
{0x324b103C, "Smart Array P711m", &SA5_access},
- {0x3350103C, "Smart Array", &SA5_access},
- {0x3351103C, "Smart Array", &SA5_access},
- {0x3352103C, "Smart Array", &SA5_access},
- {0x3353103C, "Smart Array", &SA5_access},
- {0x3354103C, "Smart Array", &SA5_access},
- {0x3355103C, "Smart Array", &SA5_access},
- {0x3356103C, "Smart Array", &SA5_access},
+ {0x3350103C, "Smart Array P222", &SA5_access},
+ {0x3351103C, "Smart Array P420", &SA5_access},
+ {0x3352103C, "Smart Array P421", &SA5_access},
+ {0x3353103C, "Smart Array P822", &SA5_access},
+ {0x3354103C, "Smart Array P420i", &SA5_access},
+ {0x3355103C, "Smart Array P220i", &SA5_access},
+ {0x3356103C, "Smart Array P721m", &SA5_access},
+ {0x1920103C, "Smart Array", &SA5_access},
+ {0x1921103C, "Smart Array", &SA5_access},
+ {0x1922103C, "Smart Array", &SA5_access},
+ {0x1923103C, "Smart Array", &SA5_access},
+ {0x1924103C, "Smart Array", &SA5_access},
+ {0x1925103C, "Smart Array", &SA5_access},
+ {0x1926103C, "Smart Array", &SA5_access},
+ {0x1928103C, "Smart Array", &SA5_access},
+ {0x334d103C, "Smart Array P822se", &SA5_access},
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -752,6 +752,7 @@
#define PCI_DEVICE_ID_HP_CISSD 0x3238
#define PCI_DEVICE_ID_HP_CISSE 0x323a
#define PCI_DEVICE_ID_HP_CISSF 0x323b
+#define PCI_DEVICE_ID_HP_CISSH 0x323c
#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
#define PCI_VENDOR_ID_PCTECH 0x1042
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 67/88] iscsi-target: Always send a response before terminating iSCSI connection
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (64 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 66/88] hpsa: gen8plus Smart Array IDs Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 68/88] target/pscsi: fix return value check Greg Kroah-Hartman
` (21 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Roland Dreier, Nicholas Bellinger,
Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roland Dreier <roland@purestorage.com>
commit 1c5c12c666fda27c7c494b34934a0a0631a48130 upstream.
There are some cases, for example when the initiator sends an
out-of-bounds ErrorRecoveryLevel value, where the iSCSI target
terminates the connection without sending back any error. Audit the
login path and add appropriate iscsit_tx_login_rsp() calls to make
sure this doesn't happen.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/iscsi/iscsi_target_login.c | 8 ++++----
drivers/target/iscsi/iscsi_target_nego.c | 10 ++++++++--
2 files changed, 12 insertions(+), 6 deletions(-)
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -131,13 +131,13 @@ int iscsi_check_for_session_reinstatemen
initiatorname_param = iscsi_find_param_from_key(
INITIATORNAME, conn->param_list);
- if (!initiatorname_param)
- return -1;
-
sessiontype_param = iscsi_find_param_from_key(
SESSIONTYPE, conn->param_list);
- if (!sessiontype_param)
+ if (!initiatorname_param || !sessiontype_param) {
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
+ ISCSI_LOGIN_STATUS_MISSING_FIELDS);
return -1;
+ }
sessiontype = (strncmp(sessiontype_param->value, NORMAL, 6)) ? 1 : 0;
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -628,8 +628,11 @@ static int iscsi_target_handle_csg_one(s
login->req_buf,
payload_length,
conn->param_list);
- if (ret < 0)
+ if (ret < 0) {
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
+ ISCSI_LOGIN_STATUS_INIT_ERR);
return -1;
+ }
if (login->first_request)
if (iscsi_target_check_first_request(conn, login) < 0)
@@ -644,8 +647,11 @@ static int iscsi_target_handle_csg_one(s
login->rsp_buf,
&login->rsp_length,
conn->param_list);
- if (ret < 0)
+ if (ret < 0) {
+ iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
+ ISCSI_LOGIN_STATUS_INIT_ERR);
return -1;
+ }
if (!login->auth_complete &&
ISCSI_TPG_ATTRIB(ISCSI_TPG_C(conn))->authentication) {
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 68/88] target/pscsi: fix return value check
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (65 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 67/88] iscsi-target: Always send a response before terminating iSCSI connection Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 69/88] target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits Greg Kroah-Hartman
` (20 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wei Yongjun, Nicholas Bellinger,
Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
commit 58932e96e438cd78f75e765d7b87ef39d3533d15 upstream.
In case of error, the function scsi_host_lookup() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[bwh: Backported to 3.2: pscsi_configure_device() returns a pointer]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_pscsi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -128,10 +128,10 @@ static int pscsi_pmode_enable_hba(struct
* pSCSI Host ID and enable for phba mode
*/
sh = scsi_host_lookup(phv->phv_host_id);
- if (IS_ERR(sh)) {
+ if (!sh) {
pr_err("pSCSI: Unable to locate SCSI Host for"
" phv_host_id: %d\n", phv->phv_host_id);
- return PTR_ERR(sh);
+ return -EINVAL;
}
phv->phv_lld_host = sh;
@@ -562,10 +562,10 @@ static struct se_device *pscsi_create_vi
sh = phv->phv_lld_host;
} else {
sh = scsi_host_lookup(pdv->pdv_host_id);
- if (IS_ERR(sh)) {
+ if (!sh) {
pr_err("pSCSI: Unable to locate"
" pdv_host_id: %d\n", pdv->pdv_host_id);
- return ERR_CAST(sh);
+ return ERR_PTR(-EINVAL);
}
}
} else {
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 69/88] target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (66 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 68/88] target/pscsi: fix return value check Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 70/88] target: use correct sense code for LUN communication failure Greg Kroah-Hartman
` (19 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hannes Reinecke, Rob Evers,
Christoph Hellwig, Roland Dreier, Nicholas Bellinger,
Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <nab@linux-iscsi.org>
commit ba539743b70cd160c84bab1c82910d0789b820f8 upstream.
This patch fixes the MAINTENANCE_IN service action type checks to only
look at the proper lower 5 bits of cdb byte 1. This addresses the case
where MI_REPORT_TARGET_PGS w/ extended header using the upper three bits of
cdb byte 1 was not processed correctly in transport_generic_cmd_sequencer,
as well as the three cases for standby, unavailable, and transition ALUA
primary access state checks.
Also add MAINTENANCE_IN to the excluded list in transport_generic_prepare_cdb()
to prevent the PARAMETER DATA FORMAT bits from being cleared.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_alua.c | 6 +++---
drivers/target/target_core_transport.c | 3 ++-
2 files changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -394,7 +394,7 @@ static inline int core_alua_state_standb
case SEND_DIAGNOSTIC:
return 0;
case MAINTENANCE_IN:
- switch (cdb[1]) {
+ switch (cdb[1] & 0x1f) {
case MI_REPORT_TARGET_PGS:
return 0;
default:
@@ -437,7 +437,7 @@ static inline int core_alua_state_unavai
case REPORT_LUNS:
return 0;
case MAINTENANCE_IN:
- switch (cdb[1]) {
+ switch (cdb[1] & 0x1f) {
case MI_REPORT_TARGET_PGS:
return 0;
default:
@@ -478,7 +478,7 @@ static inline int core_alua_state_transi
case REPORT_LUNS:
return 0;
case MAINTENANCE_IN:
- switch (cdb[1]) {
+ switch (cdb[1] & 0x1f) {
case MI_REPORT_TARGET_PGS:
return 0;
default:
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1458,6 +1458,7 @@ static inline void transport_generic_pre
case VERIFY_16: /* SBC - VRProtect */
case WRITE_VERIFY: /* SBC - VRProtect */
case WRITE_VERIFY_12: /* SBC - VRProtect */
+ case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */
break;
default:
cdb[1] &= 0x1f; /* clear logical unit number */
@@ -2813,7 +2814,7 @@ static int transport_generic_cmd_sequenc
/*
* Check for emulated MI_REPORT_TARGET_PGS.
*/
- if (cdb[1] == MI_REPORT_TARGET_PGS &&
+ if ((cdb[1] & 0x1f) == MI_REPORT_TARGET_PGS &&
su_dev->t10_alua.alua_type == SPC3_ALUA_EMULATED) {
cmd->execute_task =
target_emulate_report_target_port_groups;
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 70/88] target: use correct sense code for LUN communication failure
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (67 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 69/88] target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 71/88] target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping Greg Kroah-Hartman
` (18 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hannes Reinecke, Nicholas Bellinger,
Nicholas Bellinger, Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke <hare@suse.de>
commit 18a9df42d53fabfa43b78be1104838cc8b9762e1 upstream.
The ASC/ASCQ code for 'Logical Unit Communication failure' is
0x08/0x00; 0x80/0x00 is vendor specific.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[bwh: Backported to 3.2: add offset to buffer index]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_transport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -4702,7 +4702,7 @@ int transport_send_check_condition_and_s
/* ILLEGAL REQUEST */
buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
/* LOGICAL UNIT COMMUNICATION FAILURE */
- buffer[offset+SPC_ASC_KEY_OFFSET] = 0x80;
+ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x08;
break;
}
/*
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 71/88] target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (68 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 70/88] target: use correct sense code for LUN communication failure Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 72/88] serial: pch_uart: fix tty-kref leak in dma-rx path Greg Kroah-Hartman
` (17 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sebastian Andrzej Siewior,
Nicholas Bellinger, Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
commit 40ff2c3b3da35dd3a00ac6722056a59b4b3f2caf upstream.
This patch changes vectored file I/O to use kmap + kunmap when mapping
incoming SGL memory -> struct iovec in order to properly support 32-bit
highmem configurations. This is because an extra bounce buffer may be
required when processing scatterlist pages allocated with GFP_KERNEL.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[bwh: Backported to 3.2: use task->task_sg{,_nents} for iteration]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_file.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -299,7 +299,7 @@ static int fd_do_readv(struct se_task *t
for_each_sg(task->task_sg, sg, task->task_sg_nents, i) {
iov[i].iov_len = sg->length;
- iov[i].iov_base = sg_virt(sg);
+ iov[i].iov_base = kmap(sg_page(sg)) + sg->offset;
}
old_fs = get_fs();
@@ -307,6 +307,8 @@ static int fd_do_readv(struct se_task *t
ret = vfs_readv(fd, &iov[0], task->task_sg_nents, &pos);
set_fs(old_fs);
+ for_each_sg(task->task_sg, sg, task->task_sg_nents, i)
+ kunmap(sg_page(sg));
kfree(iov);
/*
* Return zeros and GOOD status even if the READ did not return
@@ -352,7 +354,7 @@ static int fd_do_writev(struct se_task *
for_each_sg(task->task_sg, sg, task->task_sg_nents, i) {
iov[i].iov_len = sg->length;
- iov[i].iov_base = sg_virt(sg);
+ iov[i].iov_base = kmap(sg_page(sg)) + sg->offset;
}
old_fs = get_fs();
@@ -360,6 +362,9 @@ static int fd_do_writev(struct se_task *
ret = vfs_writev(fd, &iov[0], task->task_sg_nents, &pos);
set_fs(old_fs);
+ for_each_sg(task->task_sg, sg, task->task_sg_nents, i)
+ kunmap(sg_page(sg));
+
kfree(iov);
if (ret < 0 || ret != task->task_size) {
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 72/88] serial: pch_uart: fix tty-kref leak in dma-rx path
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (69 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 71/88] target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 73/88] serial: pch_uart: fix tty-kref leak in rx-error path Greg Kroah-Hartman
` (16 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johan Hovold, Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <jhovold@gmail.com>
commit 19b85cfb190eb9980eaf416bff96aef4159a430e upstream.
Fix tty_kref leak when tty_buffer_request room fails in dma-rx path.
Note that the tty ref isn't really needed anymore, but as the leak has
always been there, fixing it before removing should makes it easier to
backport the fix.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/pch_uart.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -646,11 +646,12 @@ static int dma_push_rx(struct eg20t_port
dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
size - room);
if (!room)
- return room;
+ goto out;
tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size);
port->icount.rx += room;
+out:
tty_kref_put(tty);
return room;
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 73/88] serial: pch_uart: fix tty-kref leak in rx-error path
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (70 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 72/88] serial: pch_uart: fix tty-kref leak in dma-rx path Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 74/88] tty: Correct tty buffer flush Greg Kroah-Hartman
` (15 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johan Hovold, Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <jhovold@gmail.com>
commit fc0919c68cb2f75bb1af759315f9d7e2a9443c28 upstream.
Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a
deadlock when pch_uart as console") which never put its tty reference.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/pch_uart.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1065,6 +1065,8 @@ static void pch_uart_err_ir(struct eg20t
if (tty == NULL) {
for (i = 0; error_msg[i] != NULL; i++)
dev_err(&priv->pdev->dev, error_msg[i]);
+ } else {
+ tty_kref_put(tty);
}
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 74/88] tty: Correct tty buffer flush.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (71 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 73/88] serial: pch_uart: fix tty-kref leak in rx-error path Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 75/88] Fix 4 port and add support for 8 port Unknown PCI serial port cards Greg Kroah-Hartman
` (14 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilya Zykov, Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Zykov <ilya@ilyx.ru>
commit 64325a3be08d364a62ee8f84b2cf86934bc2544a upstream.
The root of problem is carelessly zeroing pointer(in function __tty_buffer_flush()),
when another thread can use it. It can be cause of "NULL pointer dereference".
Main idea of the patch, this is never free last (struct tty_buffer) in the active buffer.
Only flush the data for ldisc(buf->head->read = buf->head->commit).
At that moment driver can collect(write) data in buffer without conflict.
It is repeat behavior of flush_to_ldisc(), only without feeding data to ldisc.
Signed-off-by: Ilya Zykov <ilya@ilyx.ru>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/tty_buffer.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -114,11 +114,14 @@ static void __tty_buffer_flush(struct tt
{
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- tty_buffer_free(tty, thead);
+ if (tty->buf.head == NULL)
+ return;
+ while ((thead = tty->buf.head->next) != NULL) {
+ tty_buffer_free(tty, tty->buf.head);
+ tty->buf.head = thead;
}
- tty->buf.tail = NULL;
+ WARN_ON(tty->buf.head != tty->buf.tail);
+ tty->buf.head->read = tty->buf.head->commit;
}
/**
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 75/88] Fix 4 port and add support for 8 port Unknown PCI serial port cards
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (72 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 74/88] tty: Correct tty buffer flush Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 76/88] 8250/16?50: Add support for Broadcom TruManage redirected serial port Greg Kroah-Hartman
` (13 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Scott Ashcroft, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Ashcroft <scott.ashcroft@talk21.com>
commit d13402a4a944e72612a9ec5c9190e35717c02a9d upstream.
I've managed to find an 8 port version of the card 4 port card which was discussed here:
http://marc.info/?l=linux-serial&m=120760744205314&w=2
Looking back at that thread there were two issues in the original patch.
1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post.
2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return.
This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card.
$ lspci -vvv -n -s 00:08.0
00:08.0 0780: 10b5:9050 (rev 01)
Subsystem: 10b5:1588
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 1: I/O ports at ff00 [size=128]
Region 2: I/O ports at fe00 [size=64]
Region 3: I/O ports at fd00 [size=8]
Capabilities: <access denied>
Kernel driver in use: serial
$ dmesg | grep 0000:00:08.0:
[ 0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780
[ 0.083355] pci 0000:00:08.0: reg 14: [io 0xff00-0xff7f]
[ 0.083369] pci 0000:00:08.0: reg 18: [io 0xfe00-0xfe3f]
[ 0.083382] pci 0000:00:08.0: reg 1c: [io 0xfd00-0xfd07]
[ 0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot
[ 1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A
[ 1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A
[ 1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A
[ 1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A
[ 1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A
[ 1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A
[ 1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A
[ 1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A
Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com>
[xr: Backported to 3.4: adjust context]
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_pci.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1154,6 +1154,7 @@ pci_xr17c154_setup(struct serial_private
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
/*
* Master list of serial port init/setup/exit quirks.
@@ -1425,15 +1426,6 @@ static struct pci_serial_quirk pci_seria
},
{
.vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = __devexit_p(pci_plx9050_exit),
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
@@ -3109,7 +3101,12 @@ static struct pci_device_id serial_pci_t
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
- pbn_b0_4_115200 },
+ pbn_b2_4_115200 },
+ /* Unknown card - subdevice 0x1588 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+ pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 76/88] 8250/16?50: Add support for Broadcom TruManage redirected serial port
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (73 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 75/88] Fix 4 port and add support for 8 port Unknown PCI serial port cards Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 1:05 ` Ben Hutchings
2014-06-10 0:25 ` [PATCH 3.4 77/88] tty/serial: Add support for Altera " Greg Kroah-Hartman
` (12 subsequent siblings)
87 siblings, 1 reply; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stephen Hurd, Michael Chan,
Ben Hutchings, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Hurd <shurd@broadcom.com>
commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream.
Add support for the UART device present in Broadcom TruManage capable
NetXtreme chips (ie: 5761m 5762, and 5725).
This implementation has a hidden transmit FIFO, so running in single-byte
interrupt mode results in too many interrupts. The UART_CAP_HFIFO
capability was added to track this. It continues to reload the THR as long
as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
is used here).
Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
[xr: Backported to 3.4:
- Adjust filenames
- Adjust context
- PORT_BRCM_TRUMANAGE is 22 not 24]
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250.c | 15 ++++++++++++--
drivers/tty/serial/8250/8250.h | 1
drivers/tty/serial/8250/8250_pci.c | 38 +++++++++++++++++++++++++++++++++++++
include/linux/serial_core.h | 3 +-
4 files changed, 54 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -282,6 +282,12 @@ static const struct serial8250_config ua
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
},
+ [PORT_BRCM_TRUMANAGE] = {
+ .name = "TruManage",
+ .fifo_size = 1,
+ .tx_loadsz = 1024,
+ .flags = UART_CAP_HFIFO,
+ },
};
#if defined(CONFIG_MIPS_ALCHEMY)
@@ -1470,6 +1476,11 @@ void serial8250_tx_chars(struct uart_825
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
+ if (up->capabilities & UART_CAP_HFIFO) {
+ if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+ BOTH_EMPTY)
+ break;
+ }
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -2641,7 +2652,7 @@ serial8250_verify_port(struct uart_port
if (ser->irq >= nr_irqs || ser->irq < 0 ||
ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
- ser->type == PORT_STARTECH)
+ ser->type == PORT_STARTECH || uart_config[ser->type].name == NULL)
return -EINVAL;
return 0;
}
@@ -2651,7 +2662,7 @@ serial8250_type(struct uart_port *port)
{
int type = port->type;
- if (type >= ARRAY_SIZE(uart_config))
+ if (type >= ARRAY_SIZE(uart_config) || uart_config[type].name == NULL)
type = 0;
return uart_config[type].name;
}
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -69,6 +69,7 @@ struct serial8250_config {
#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1077,6 +1077,18 @@ pci_omegapci_setup(struct serial_private
return setup_port(priv, port, 2, idx * 8, 0);
}
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ int ret = pci_default_setup(priv, board, port, idx);
+
+ port->port.type = PORT_BRCM_TRUMANAGE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ return ret;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_port *port, int idx)
@@ -1151,6 +1163,7 @@ pci_xr17c154_setup(struct serial_private
#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1684,6 +1697,17 @@ static struct pci_serial_quirk pci_seria
.setup = pci_omegapci_setup,
},
/*
+ * Broadcom TruManage (NetXtreme)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_BROADCOM,
+ .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_brcm_trumanage_setup,
+ },
+
+ /*
* Default "match everything" terminator entry
*/
{
@@ -1872,6 +1896,7 @@ enum pci_board_num_t {
pbn_ce4100_1_115200,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
+ pbn_brcm_trumanage,
};
/*
@@ -2578,6 +2603,12 @@ static struct pciserial_board pci_boards
.num_ports = 2,
.base_baud = 115200,
},
+ [pbn_brcm_trumanage] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .reg_shift = 2,
+ .base_baud = 115200,
+ },
};
static const struct pci_device_id softmodem_blacklist[] = {
@@ -4140,6 +4171,13 @@ static struct pci_device_id serial_pci_t
pbn_omegapci },
/*
+ * Broadcom TruManage
+ */
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_brcm_trumanage },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -47,7 +47,8 @@
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_MAX_8250 21 /* max port ID */
+#define PORT_BRCM_TRUMANAGE 25
+#define PORT_MAX_8250 25 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 77/88] tty/serial: Add support for Altera serial port
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (74 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 76/88] 8250/16?50: Add support for Broadcom TruManage redirected serial port Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 78/88] xen/p2m: Move code around to allow for better re-usage Greg Kroah-Hartman
` (11 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ley Foon Tan, Rui Xiang
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ley Foon Tan <lftan@altera.com>
commit e06c93cacb82dd147266fd1bdb2d0a0bd45ff2c1 upstream.
Add support for Altera 8250/16550 compatible serial port.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
[xr: Backported to 3.4: adjust filenames, context]
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/tty/serial/of-serial.txt | 3 +
drivers/tty/serial/8250/8250.c | 21 +++++++++++++
drivers/tty/serial/of_serial.c | 6 +++
include/linux/serial_core.h | 5 ++-
4 files changed, 34 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -10,6 +10,9 @@ Required properties:
- "ns16850"
- "nvidia,tegra20-uart"
- "ibm,qpace-nwp-serial"
+ - "altr,16550-FIFO32"
+ - "altr,16550-FIFO64"
+ - "altr,16550-FIFO128"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -288,6 +288,27 @@ static const struct serial8250_config ua
.tx_loadsz = 1024,
.flags = UART_CAP_HFIFO,
},
+ [PORT_ALTR_16550_F32] = {
+ .name = "Altera 16550 FIFO32",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F64] = {
+ .name = "Altera 16550 FIFO64",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F128] = {
+ .name = "Altera 16550 FIFO128",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
#if defined(CONFIG_MIPS_ALCHEMY)
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -182,6 +182,12 @@ static struct of_device_id __devinitdata
{ .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
+ { .compatible = "altr,16550-FIFO32",
+ .data = (void *)PORT_ALTR_16550_F32, },
+ { .compatible = "altr,16550-FIFO64",
+ .data = (void *)PORT_ALTR_16550_F64, },
+ { .compatible = "altr,16550-FIFO128",
+ .data = (void *)PORT_ALTR_16550_F128, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -48,7 +48,10 @@
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
#define PORT_BRCM_TRUMANAGE 25
-#define PORT_MAX_8250 25 /* max port ID */
+#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */
+#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */
+#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
+#define PORT_MAX_8250 28 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 78/88] xen/p2m: Move code around to allow for better re-usage.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (75 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 77/88] tty/serial: Add support for Altera " Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 79/88] xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on argument Greg Kroah-Hartman
` (10 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Kiper, Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 3f3aaea29ff7ee2d43b430338427f30ba7f60ff9 upstream.
We are going to be using the early_alloc_p2m (and
early_alloc_p2m_middle) code in follow up patches which
are not related to setting identity pages.
Hence lets move the code out in its own function and
rename them as appropiate.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/p2m.c | 62 +++++++++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 28 deletions(-)
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -499,7 +499,7 @@ static bool alloc_p2m(unsigned long pfn)
return true;
}
-static bool __init __early_alloc_p2m(unsigned long pfn)
+static bool __init early_alloc_p2m_middle(unsigned long pfn)
{
unsigned topidx, mididx, idx;
@@ -541,6 +541,36 @@ static bool __init __early_alloc_p2m(uns
}
return idx != 0;
}
+
+static bool __init early_alloc_p2m(unsigned long pfn)
+{
+ unsigned topidx = p2m_top_index(pfn);
+ unsigned long *mid_mfn_p;
+ unsigned long **mid;
+
+ mid = p2m_top[topidx];
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ if (mid == p2m_mid_missing) {
+ mid = extend_brk(PAGE_SIZE, PAGE_SIZE);
+
+ p2m_mid_init(mid);
+
+ p2m_top[topidx] = mid;
+
+ BUG_ON(mid_mfn_p != p2m_mid_missing_mfn);
+ }
+ /* And the save/restore P2M tables.. */
+ if (mid_mfn_p == p2m_mid_missing_mfn) {
+ mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ p2m_mid_mfn_init(mid_mfn_p);
+
+ p2m_top_mfn_p[topidx] = mid_mfn_p;
+ p2m_top_mfn[topidx] = virt_to_mfn(mid_mfn_p);
+ /* Note: we don't set mid_mfn_p[midix] here,
+ * look in early_alloc_p2m_middle */
+ }
+ return true;
+}
unsigned long __init set_phys_range_identity(unsigned long pfn_s,
unsigned long pfn_e)
{
@@ -559,35 +589,11 @@ unsigned long __init set_phys_range_iden
pfn < ALIGN(pfn_e, (P2M_MID_PER_PAGE * P2M_PER_PAGE));
pfn += P2M_MID_PER_PAGE * P2M_PER_PAGE)
{
- unsigned topidx = p2m_top_index(pfn);
- unsigned long *mid_mfn_p;
- unsigned long **mid;
-
- mid = p2m_top[topidx];
- mid_mfn_p = p2m_top_mfn_p[topidx];
- if (mid == p2m_mid_missing) {
- mid = extend_brk(PAGE_SIZE, PAGE_SIZE);
-
- p2m_mid_init(mid);
-
- p2m_top[topidx] = mid;
-
- BUG_ON(mid_mfn_p != p2m_mid_missing_mfn);
- }
- /* And the save/restore P2M tables.. */
- if (mid_mfn_p == p2m_mid_missing_mfn) {
- mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE);
- p2m_mid_mfn_init(mid_mfn_p);
-
- p2m_top_mfn_p[topidx] = mid_mfn_p;
- p2m_top_mfn[topidx] = virt_to_mfn(mid_mfn_p);
- /* Note: we don't set mid_mfn_p[midix] here,
- * look in __early_alloc_p2m */
- }
+ WARN_ON(!early_alloc_p2m(pfn));
}
- __early_alloc_p2m(pfn_s);
- __early_alloc_p2m(pfn_e);
+ early_alloc_p2m_middle(pfn_s);
+ early_alloc_p2m_middle(pfn_e);
for (pfn = pfn_s; pfn < pfn_e; pfn++)
if (!__set_phys_to_machine(pfn, IDENTITY_FRAME(pfn)))
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 79/88] xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on argument
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (76 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 78/88] xen/p2m: Move code around to allow for better re-usage Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 80/88] xen/p2m: Collapse early_alloc_p2m_middle redundant checks Greg Kroah-Hartman
` (9 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Kiper, Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit cef4cca551d652b7f69c9d76337c5fae24e069dc upstream.
For identity cases we want to call reserve_brk only on the boundary
conditions of the middle P2M (so P2M[x][y][0] = extend_brk). This is
to work around identify regions (PCI spaces, gaps in E820) which are not
aligned on 2MB regions.
However for the case were we want to allocate P2M middle leafs at the
early bootup stage, irregardless of this alignment check we need some
means of doing that. For that we provide the new argument.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/p2m.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -499,7 +499,7 @@ static bool alloc_p2m(unsigned long pfn)
return true;
}
-static bool __init early_alloc_p2m_middle(unsigned long pfn)
+static bool __init early_alloc_p2m_middle(unsigned long pfn, bool check_boundary)
{
unsigned topidx, mididx, idx;
@@ -508,7 +508,7 @@ static bool __init early_alloc_p2m_middl
idx = p2m_index(pfn);
/* Pfff.. No boundary cross-over, lets get out. */
- if (!idx)
+ if (!idx && check_boundary)
return false;
WARN(p2m_top[topidx][mididx] == p2m_identity,
@@ -531,7 +531,7 @@ static bool __init early_alloc_p2m_middl
p2m_top[topidx][mididx] = p2m;
/* For save/restore we need to MFN of the P2M saved */
-
+
mid_mfn_p = p2m_top_mfn_p[topidx];
WARN(mid_mfn_p[mididx] != virt_to_mfn(p2m_missing),
"P2M_TOP_P[%d][%d] != MFN of p2m_missing!\n",
@@ -592,8 +592,8 @@ unsigned long __init set_phys_range_iden
WARN_ON(!early_alloc_p2m(pfn));
}
- early_alloc_p2m_middle(pfn_s);
- early_alloc_p2m_middle(pfn_e);
+ early_alloc_p2m_middle(pfn_s, true);
+ early_alloc_p2m_middle(pfn_e, true);
for (pfn = pfn_s; pfn < pfn_e; pfn++)
if (!__set_phys_to_machine(pfn, IDENTITY_FRAME(pfn)))
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 80/88] xen/p2m: Collapse early_alloc_p2m_middle redundant checks.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (77 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 79/88] xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on argument Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 81/88] xen/p2m: An early bootup variant of set_phys_to_machine Greg Kroah-Hartman
` (8 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Kiper, Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit d5096850b47424fb0f1c6a75b8f7184f7169319a upstream.
At the start of the function we were checking for idx != 0
and bailing out. And later calling extend_brk if idx != 0.
That is unnecessary so remove that checks.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/p2m.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -502,6 +502,8 @@ static bool alloc_p2m(unsigned long pfn)
static bool __init early_alloc_p2m_middle(unsigned long pfn, bool check_boundary)
{
unsigned topidx, mididx, idx;
+ unsigned long *p2m;
+ unsigned long *mid_mfn_p;
topidx = p2m_top_index(pfn);
mididx = p2m_mid_index(pfn);
@@ -522,24 +524,21 @@ static bool __init early_alloc_p2m_middl
return false;
/* Boundary cross-over for the edges: */
- if (idx) {
- unsigned long *p2m = extend_brk(PAGE_SIZE, PAGE_SIZE);
- unsigned long *mid_mfn_p;
+ p2m = extend_brk(PAGE_SIZE, PAGE_SIZE);
- p2m_init(p2m);
+ p2m_init(p2m);
- p2m_top[topidx][mididx] = p2m;
+ p2m_top[topidx][mididx] = p2m;
- /* For save/restore we need to MFN of the P2M saved */
+ /* For save/restore we need to MFN of the P2M saved */
- mid_mfn_p = p2m_top_mfn_p[topidx];
- WARN(mid_mfn_p[mididx] != virt_to_mfn(p2m_missing),
- "P2M_TOP_P[%d][%d] != MFN of p2m_missing!\n",
- topidx, mididx);
- mid_mfn_p[mididx] = virt_to_mfn(p2m);
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ WARN(mid_mfn_p[mididx] != virt_to_mfn(p2m_missing),
+ "P2M_TOP_P[%d][%d] != MFN of p2m_missing!\n",
+ topidx, mididx);
+ mid_mfn_p[mididx] = virt_to_mfn(p2m);
- }
- return idx != 0;
+ return true;
}
static bool __init early_alloc_p2m(unsigned long pfn)
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 81/88] xen/p2m: An early bootup variant of set_phys_to_machine
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (78 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 80/88] xen/p2m: Collapse early_alloc_p2m_middle redundant checks Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM Greg Kroah-Hartman
` (7 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Kiper, Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 940713bb2ce3033f468a220094a07250a2f69bdd upstream.
During early bootup we can't use alloc_page, so to allocate
leaf pages in the P2M we need to use extend_brk. For that
we are utilizing the early_alloc_p2m and early_alloc_p2m_middle
functions to do the job for us. This function follows the
same logic as set_phys_to_machine.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/xen/page.h | 1 +
arch/x86/xen/p2m.c | 15 +++++++++++++++
2 files changed, 16 insertions(+)
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -44,6 +44,7 @@ extern unsigned long machine_to_phys_nr
extern unsigned long get_phys_to_machine(unsigned long pfn);
extern bool set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+extern bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn);
extern bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
extern unsigned long set_phys_range_identity(unsigned long pfn_s,
unsigned long pfn_e);
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -570,6 +570,21 @@ static bool __init early_alloc_p2m(unsig
}
return true;
}
+bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ if (unlikely(!__set_phys_to_machine(pfn, mfn))) {
+ if (!early_alloc_p2m(pfn))
+ return false;
+
+ if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/))
+ return false;
+
+ if (!__set_phys_to_machine(pfn, mfn))
+ return false;
+ }
+
+ return true;
+}
unsigned long __init set_phys_range_identity(unsigned long pfn_s,
unsigned long pfn_e)
{
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (79 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 81/88] xen/p2m: An early bootup variant of set_phys_to_machine Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 9:07 ` David Vrabel
2014-06-10 0:25 ` [PATCH 3.4 83/88] xen/setup: Combine the two hypercall functions - since they are quite similar Greg Kroah-Hartman
` (6 subsequent siblings)
87 siblings, 1 reply; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Vrabel, Konrad Rzeszutek Wilk,
Daniel Kiper
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 2e2fb75475c2fc74c98100f1468c8195fee49f3b upstream.
When the Xen hypervisor boots a PV kernel it hands it two pieces
of information: nr_pages and a made up E820 entry.
The nr_pages value defines the range from zero to nr_pages of PFNs
which have a valid Machine Frame Number (MFN) underneath it. The
E820 mirrors that (with the VGA hole):
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000000a0000 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000080800000 (usable)
The fun comes when a PV guest that is run with a machine E820 - that
can either be the initial domain or a PCI PV guest, where the E820
looks like the normal thing:
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009e000 (usable)
Xen: 000000000009ec00 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000020000000 (usable)
Xen: 0000000020000000 - 0000000020200000 (reserved)
Xen: 0000000020200000 - 0000000040000000 (usable)
Xen: 0000000040000000 - 0000000040200000 (reserved)
Xen: 0000000040200000 - 00000000bad80000 (usable)
Xen: 00000000bad80000 - 00000000badc9000 (ACPI NVS)
..
With that overlaying the nr_pages directly on the E820 does not
work as there are gaps and non-RAM regions that won't be used
by the memory allocator. The 'xen_release_chunk' helps with that
by punching holes in the P2M (PFN to MFN lookup tree) for those
regions and tells us that:
Freeing 20000-20200 pfn range: 512 pages freed
Freeing 40000-40200 pfn range: 512 pages freed
Freeing bad80-badf4 pfn range: 116 pages freed
Freeing badf6-bae7f pfn range: 137 pages freed
Freeing bb000-100000 pfn range: 282624 pages freed
Released 283999 pages of unused memory
Those 283999 pages are subtracted from the nr_pages and are returned
to the hypervisor. The end result is that the initial domain
boots with 1GB less memory as the nr_pages has been subtracted by
the amount of pages residing within the PCI hole. It can balloon up
to that if desired using 'xl mem-set 0 8092', but the balloon driver
is not always compiled in for the initial domain.
This patch, implements the populate hypercall (XENMEM_populate_physmap)
which increases the the domain with the same amount of pages that
were released.
The other solution (that did not work) was to transplant the MFN in
the P2M tree - the ones that were going to be freed were put in
the E820_RAM regions past the nr_pages. But the modifications to the
M2P array (the other side of creating PTEs) were not carried away.
As the hypervisor is the only one capable of modifying that and the
only two hypercalls that would do this are: the update_va_mapping
(which won't work, as during initial bootup only PFNs up to nr_pages
are mapped in the guest) or via the populate hypercall.
The end result is that the kernel can now boot with the
nr_pages without having to subtract the 283999 pages.
On a 8GB machine, with various dom0_mem= parameters this is what we get:
no dom0_mem
-Memory: 6485264k/9435136k available (5817k kernel code, 1136060k absent, 1813812k reserved, 2899k data, 696k init)
+Memory: 7619036k/9435136k available (5817k kernel code, 1136060k absent, 680040k reserved, 2899k data, 696k init)
dom0_mem=3G
-Memory: 2616536k/9435136k available (5817k kernel code, 1136060k absent, 5682540k reserved, 2899k data, 696k init)
+Memory: 2703776k/9435136k available (5817k kernel code, 1136060k absent, 5595300k reserved, 2899k data, 696k init)
dom0_mem=max:3G
-Memory: 2696732k/4281724k available (5817k kernel code, 1136060k absent, 448932k reserved, 2899k data, 696k init)
+Memory: 2702204k/4281724k available (5817k kernel code, 1136060k absent, 443460k reserved, 2899k data, 696k init)
And the 'xm list' or 'xl list' now reflect what the dom0_mem=
argument is.
Acked-by: David Vrabel <david.vrabel@citrix.com>
[v2: Use populate hypercall]
[v3: Remove debug printks]
[v4: Simplify code]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/setup.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 112 insertions(+), 4 deletions(-)
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -27,7 +27,6 @@
#include <xen/interface/memory.h>
#include <xen/interface/physdev.h>
#include <xen/features.h>
-
#include "xen-ops.h"
#include "vdso.h"
@@ -127,7 +126,105 @@ static unsigned long __init xen_release_
return len;
}
+static unsigned long __init xen_populate_physmap(unsigned long start,
+ unsigned long end)
+{
+ struct xen_memory_reservation reservation = {
+ .address_bits = 0,
+ .extent_order = 0,
+ .domid = DOMID_SELF
+ };
+ unsigned long len = 0;
+ int ret;
+
+ for (pfn = start; pfn < end; pfn++) {
+ unsigned long frame;
+
+ /* Make sure pfn does not exists to start with */
+ if (pfn_to_mfn(pfn) != INVALID_P2M_ENTRY)
+ continue;
+
+ frame = pfn;
+ set_xen_guest_handle(reservation.extent_start, &frame);
+ reservation.nr_extents = 1;
+
+ ret = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation);
+ WARN(ret != 1, "Failed to populate pfn %lx err=%d\n", pfn, ret);
+ if (ret == 1) {
+ if (!early_set_phys_to_machine(pfn, frame)) {
+ set_xen_guest_handle(reservation.extent_start, &frame);
+ reservation.nr_extents = 1;
+ ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
+ &reservation);
+ break;
+ }
+ len++;
+ } else
+ break;
+ }
+ if (len)
+ printk(KERN_INFO "Populated %lx-%lx pfn range: %lu pages added\n",
+ start, end, len);
+ return len;
+}
+static unsigned long __init xen_populate_chunk(
+ const struct e820entry *list, size_t map_size,
+ unsigned long max_pfn, unsigned long *last_pfn,
+ unsigned long credits_left)
+{
+ const struct e820entry *entry;
+ unsigned int i;
+ unsigned long done = 0;
+ unsigned long dest_pfn;
+
+ for (i = 0, entry = list; i < map_size; i++, entry++) {
+ unsigned long credits = credits_left;
+ unsigned long s_pfn;
+ unsigned long e_pfn;
+ unsigned long pfns;
+ long capacity;
+
+ if (credits <= 0)
+ break;
+
+ if (entry->type != E820_RAM)
+ continue;
+
+ e_pfn = PFN_UP(entry->addr + entry->size);
+
+ /* We only care about E820 after the xen_start_info->nr_pages */
+ if (e_pfn <= max_pfn)
+ continue;
+
+ s_pfn = PFN_DOWN(entry->addr);
+ /* If the E820 falls within the nr_pages, we want to start
+ * at the nr_pages PFN.
+ * If that would mean going past the E820 entry, skip it
+ */
+ if (s_pfn <= max_pfn) {
+ capacity = e_pfn - max_pfn;
+ dest_pfn = max_pfn;
+ } else {
+ /* last_pfn MUST be within E820_RAM regions */
+ if (*last_pfn && e_pfn >= *last_pfn)
+ s_pfn = *last_pfn;
+ capacity = e_pfn - s_pfn;
+ dest_pfn = s_pfn;
+ }
+ /* If we had filled this E820_RAM entry, go to the next one. */
+ if (capacity <= 0)
+ continue;
+
+ if (credits > capacity)
+ credits = capacity;
+ pfns = xen_populate_physmap(dest_pfn, dest_pfn + credits);
+ done += pfns;
+ credits_left -= pfns;
+ *last_pfn = (dest_pfn + pfns);
+ }
+ return done;
+}
static unsigned long __init xen_set_identity_and_release(
const struct e820entry *list, size_t map_size, unsigned long nr_pages)
{
@@ -150,7 +247,6 @@ static unsigned long __init xen_set_iden
*/
for (i = 0, entry = list; i < map_size; i++, entry++) {
phys_addr_t end = entry->addr + entry->size;
-
if (entry->type == E820_RAM || i == map_size - 1) {
unsigned long start_pfn = PFN_DOWN(start);
unsigned long end_pfn = PFN_UP(end);
@@ -236,7 +332,9 @@ char * __init xen_memory_setup(void)
int rc;
struct xen_memory_map memmap;
unsigned long max_pages;
+ unsigned long last_pfn = 0;
unsigned long extra_pages = 0;
+ unsigned long populated;
int i;
int op;
@@ -287,9 +385,20 @@ char * __init xen_memory_setup(void)
*/
xen_released_pages = xen_set_identity_and_release(
map, memmap.nr_entries, max_pfn);
- extra_pages += xen_released_pages;
/*
+ * Populate back the non-RAM pages and E820 gaps that had been
+ * released. */
+ populated = xen_populate_chunk(map, memmap.nr_entries,
+ max_pfn, &last_pfn, xen_released_pages);
+
+ extra_pages += (xen_released_pages - populated);
+
+ if (last_pfn > max_pfn) {
+ max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);
+ mem_end = PFN_PHYS(max_pfn);
+ }
+ /*
* Clamp the amount of extra memory to a EXTRA_MEM_RATIO
* factor the base size. On non-highmem systems, the base
* size is the full initial memory allocation; on highmem it
@@ -302,7 +411,6 @@ char * __init xen_memory_setup(void)
*/
extra_pages = min(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)),
extra_pages);
-
i = 0;
while (i < memmap.nr_entries) {
u64 addr = map[i].addr;
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 83/88] xen/setup: Combine the two hypercall functions - since they are quite similar.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (80 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 84/88] xen/setup: update VA mapping when releasing memory during setup Greg Kroah-Hartman
` (5 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Vrabel, Konrad Rzeszutek Wilk,
Daniel Kiper
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 96dc08b35c4af8cb5810450602590706f2593a5f upstream.
They use the same set of arguments, so it is just the matter
of using the proper hypercall.
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/setup.c | 80 +++++++++++++++++++--------------------------------
1 file changed, 30 insertions(+), 50 deletions(-)
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -91,8 +91,8 @@ static void __init xen_add_extra_mem(u64
}
}
-static unsigned long __init xen_release_chunk(unsigned long start,
- unsigned long end)
+static unsigned long __init xen_do_chunk(unsigned long start,
+ unsigned long end, bool release)
{
struct xen_memory_reservation reservation = {
.address_bits = 0,
@@ -103,59 +103,36 @@ static unsigned long __init xen_release_
unsigned long pfn;
int ret;
- for(pfn = start; pfn < end; pfn++) {
- unsigned long mfn = pfn_to_mfn(pfn);
-
- /* Make sure pfn exists to start with */
- if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn)
- continue;
-
- set_xen_guest_handle(reservation.extent_start, &mfn);
- reservation.nr_extents = 1;
-
- ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
- &reservation);
- WARN(ret != 1, "Failed to release pfn %lx err=%d\n", pfn, ret);
- if (ret == 1) {
- __set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
- len++;
- }
- }
- printk(KERN_INFO "Freeing %lx-%lx pfn range: %lu pages freed\n",
- start, end, len);
-
- return len;
-}
-static unsigned long __init xen_populate_physmap(unsigned long start,
- unsigned long end)
-{
- struct xen_memory_reservation reservation = {
- .address_bits = 0,
- .extent_order = 0,
- .domid = DOMID_SELF
- };
- unsigned long len = 0;
- int ret;
-
for (pfn = start; pfn < end; pfn++) {
unsigned long frame;
+ unsigned long mfn = pfn_to_mfn(pfn);
- /* Make sure pfn does not exists to start with */
- if (pfn_to_mfn(pfn) != INVALID_P2M_ENTRY)
- continue;
-
- frame = pfn;
+ if (release) {
+ /* Make sure pfn exists to start with */
+ if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn)
+ continue;
+ frame = mfn;
+ } else {
+ if (mfn != INVALID_P2M_ENTRY)
+ continue;
+ frame = pfn;
+ }
set_xen_guest_handle(reservation.extent_start, &frame);
reservation.nr_extents = 1;
- ret = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation);
- WARN(ret != 1, "Failed to populate pfn %lx err=%d\n", pfn, ret);
+ ret = HYPERVISOR_memory_op(release ? XENMEM_decrease_reservation : XENMEM_populate_physmap,
+ &reservation);
+ WARN(ret != 1, "Failed to %s pfn %lx err=%d\n",
+ release ? "release" : "populate", pfn, ret);
+
if (ret == 1) {
- if (!early_set_phys_to_machine(pfn, frame)) {
+ if (!early_set_phys_to_machine(pfn, release ? INVALID_P2M_ENTRY : frame)) {
+ if (release)
+ break;
set_xen_guest_handle(reservation.extent_start, &frame);
reservation.nr_extents = 1;
ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
- &reservation);
+ &reservation);
break;
}
len++;
@@ -163,8 +140,11 @@ static unsigned long __init xen_populate
break;
}
if (len)
- printk(KERN_INFO "Populated %lx-%lx pfn range: %lu pages added\n",
- start, end, len);
+ printk(KERN_INFO "%s %lx-%lx pfn range: %lu pages %s\n",
+ release ? "Freeing" : "Populating",
+ start, end, len,
+ release ? "freed" : "added");
+
return len;
}
static unsigned long __init xen_populate_chunk(
@@ -218,7 +198,7 @@ static unsigned long __init xen_populate
if (credits > capacity)
credits = capacity;
- pfns = xen_populate_physmap(dest_pfn, dest_pfn + credits);
+ pfns = xen_do_chunk(dest_pfn, dest_pfn + credits, false);
done += pfns;
credits_left -= pfns;
*last_pfn = (dest_pfn + pfns);
@@ -256,8 +236,8 @@ static unsigned long __init xen_set_iden
if (start_pfn < end_pfn) {
if (start_pfn < nr_pages)
- released += xen_release_chunk(
- start_pfn, min(end_pfn, nr_pages));
+ released += xen_do_chunk(
+ start_pfn, min(end_pfn, nr_pages), true);
identity += set_phys_range_identity(
start_pfn, end_pfn);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 84/88] xen/setup: update VA mapping when releasing memory during setup
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (81 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 83/88] xen/setup: Combine the two hypercall functions - since they are quite similar Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 85/88] xen/balloon: Subtract from xen_released_pages the count that is populated Greg Kroah-Hartman
` (4 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Vrabel, Konrad Rzeszutek Wilk,
Daniel Kiper
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Vrabel <dvrabel@cantab.net>
commit 83d51ab473dddde7df858015070ed22b84ebe9a9 upstream.
In xen_memory_setup(), if a page that is being released has a VA
mapping this must also be updated. Otherwise, the page will be not
released completely -- it will still be referenced in Xen and won't be
freed util the mapping is removed and this prevents it from being
reallocated at a different PFN.
This was already being done for the ISA memory region in
xen_ident_map_ISA() but on many systems this was omitting a few pages
as many systems marked a few pages below the ISA memory region as
reserved in the e820 map.
This fixes errors such as:
(XEN) page_alloc.c:1148:d0 Over-allocation for domain 0: 2097153 > 2097152
(XEN) memory.c:133:d0 Could not allocate order=0 extent: id=0 memflags=0 (0 of 17)
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/enlighten.c | 1 -
arch/x86/xen/mmu.c | 23 -----------------------
arch/x86/xen/setup.c | 43 +++++++++++++++++++++++++++++++++++--------
arch/x86/xen/xen-ops.h | 1 -
4 files changed, 35 insertions(+), 33 deletions(-)
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1390,7 +1390,6 @@ asmlinkage void __init xen_start_kernel(
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
- xen_ident_map_ISA();
/* Allocate and initialize top and mid mfn levels for p2m structure */
xen_build_mfn_list_list();
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1953,29 +1953,6 @@ static void xen_set_fixmap(unsigned idx,
#endif
}
-void __init xen_ident_map_ISA(void)
-{
- unsigned long pa;
-
- /*
- * If we're dom0, then linear map the ISA machine addresses into
- * the kernel's address space.
- */
- if (!xen_initial_domain())
- return;
-
- xen_raw_printk("Xen: setup ISA identity maps\n");
-
- for (pa = ISA_START_ADDRESS; pa < ISA_END_ADDRESS; pa += PAGE_SIZE) {
- pte_t pte = mfn_pte(PFN_DOWN(pa), PAGE_KERNEL_IO);
-
- if (HYPERVISOR_update_va_mapping(PAGE_OFFSET + pa, pte, 0))
- BUG();
- }
-
- xen_flush_tlb();
-}
-
static void __init xen_post_allocator_init(void)
{
pv_mmu_ops.set_pte = xen_set_pte;
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -147,6 +147,13 @@ static unsigned long __init xen_do_chunk
return len;
}
+
+static unsigned long __init xen_release_chunk(unsigned long start,
+ unsigned long end)
+{
+ return xen_do_chunk(start, end, true);
+}
+
static unsigned long __init xen_populate_chunk(
const struct e820entry *list, size_t map_size,
unsigned long max_pfn, unsigned long *last_pfn,
@@ -205,6 +212,29 @@ static unsigned long __init xen_populate
}
return done;
}
+
+static void __init xen_set_identity_and_release_chunk(
+ unsigned long start_pfn, unsigned long end_pfn, unsigned long nr_pages,
+ unsigned long *released, unsigned long *identity)
+{
+ unsigned long pfn;
+
+ /*
+ * If the PFNs are currently mapped, the VA mapping also needs
+ * to be updated to be 1:1.
+ */
+ for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++)
+ (void)HYPERVISOR_update_va_mapping(
+ (unsigned long)__va(pfn << PAGE_SHIFT),
+ mfn_pte(pfn, PAGE_KERNEL_IO), 0);
+
+ if (start_pfn < nr_pages)
+ *released += xen_release_chunk(
+ start_pfn, min(end_pfn, nr_pages));
+
+ *identity += set_phys_range_identity(start_pfn, end_pfn);
+}
+
static unsigned long __init xen_set_identity_and_release(
const struct e820entry *list, size_t map_size, unsigned long nr_pages)
{
@@ -234,14 +264,11 @@ static unsigned long __init xen_set_iden
if (entry->type == E820_RAM)
end_pfn = PFN_UP(entry->addr);
- if (start_pfn < end_pfn) {
- if (start_pfn < nr_pages)
- released += xen_do_chunk(
- start_pfn, min(end_pfn, nr_pages), true);
-
- identity += set_phys_range_identity(
- start_pfn, end_pfn);
- }
+ if (start_pfn < end_pfn)
+ xen_set_identity_and_release_chunk(
+ start_pfn, end_pfn, nr_pages,
+ &released, &identity);
+
start = end;
}
}
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -28,7 +28,6 @@ void xen_setup_shared_info(void);
void xen_build_mfn_list_list(void);
void xen_setup_machphys_mapping(void);
pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
-void xen_ident_map_ISA(void);
void xen_reserve_top(void);
extern unsigned long xen_max_p2m_pfn;
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 85/88] xen/balloon: Subtract from xen_released_pages the count that is populated.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (82 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 84/88] xen/setup: update VA mapping when releasing memory during setup Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 86/88] xen: populate correct number of pages when across mem boundary (v2) Greg Kroah-Hartman
` (3 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Vrabel, Daniel Kiper,
Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 58b7b53a36b0be8081fbfc91aeea24b83c20ca1b upstream.
We did not take into account that xen_released_pages would be
used outside the initial E820 parsing code. As such we would
did not subtract from xen_released_pages the count of pages
that we had populated back (instead we just did a simple
extra_pages = released - populated).
The balloon driver uses xen_released_pages to set the initial
current_pages count. If this is wrong (too low) then when a new
(higher) target is set, the balloon driver will request too many pages
from Xen."
This fixes errors such as:
(XEN) memory.c:133:d0 Could not allocate order=0 extent: id=0 memflags=0 (51 of 512)
during bootup and
free_memory : 0
where the free_memory should be 128.
Acked-by: David Vrabel <david.vrabel@citrix.com>
[v1: Per David's review made the git commit better]
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/setup.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -399,7 +399,8 @@ char * __init xen_memory_setup(void)
populated = xen_populate_chunk(map, memmap.nr_entries,
max_pfn, &last_pfn, xen_released_pages);
- extra_pages += (xen_released_pages - populated);
+ xen_released_pages -= populated;
+ extra_pages += xen_released_pages;
if (last_pfn > max_pfn) {
max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 86/88] xen: populate correct number of pages when across mem boundary (v2)
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (83 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 85/88] xen/balloon: Subtract from xen_released_pages the count that is populated Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 87/88] xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back Greg Kroah-Hartman
` (2 subsequent siblings)
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zhenzhong Duan, Daniel Kiper,
Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "zhenzhong.duan" <zhenzhong.duan@oracle.com>
commit c3d93f880197953f86ab90d9da4744e926b38e33 upstream.
When populate pages across a mem boundary at bootup, the page count
populated isn't correct. This is due to mem populated to non-mem
region and ignored.
Pfn range is also wrongly aligned when mem boundary isn't page aligned.
For a dom0 booted with dom_mem=3368952K(0xcd9ff000-4k) dmesg diff is:
[ 0.000000] Freeing 9e-100 pfn range: 98 pages freed
[ 0.000000] 1-1 mapping on 9e->100
[ 0.000000] 1-1 mapping on cd9ff->100000
[ 0.000000] Released 98 pages of unused memory
[ 0.000000] Set 206435 page(s) to 1-1 mapping
-[ 0.000000] Populating cd9fe-cda00 pfn range: 1 pages added
+[ 0.000000] Populating cd9fe-cd9ff pfn range: 1 pages added
+[ 0.000000] Populating 100000-100061 pfn range: 97 pages added
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000cd9ff000 (usable)
[ 0.000000] Xen: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS)
...
[ 0.000000] Xen: 0000000100000000 - 0000000100061000 (usable)
[ 0.000000] Xen: 0000000100061000 - 000000012c000000 (unusable)
...
[ 0.000000] MEMBLOCK configuration:
...
-[ 0.000000] reserved[0x4] [0x000000cd9ff000-0x000000cd9ffbff], 0xc00 bytes
-[ 0.000000] reserved[0x5] [0x00000100000000-0x00000100060fff], 0x61000 bytes
Related xen memory layout:
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cd9ffc00 (usable)
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
[v2: If xen_do_chunk fail(populate), abort this chunk and any others]
Suggested by David, thanks.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/setup.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -165,25 +165,24 @@ static unsigned long __init xen_populate
unsigned long dest_pfn;
for (i = 0, entry = list; i < map_size; i++, entry++) {
- unsigned long credits = credits_left;
unsigned long s_pfn;
unsigned long e_pfn;
unsigned long pfns;
long capacity;
- if (credits <= 0)
+ if (credits_left <= 0)
break;
if (entry->type != E820_RAM)
continue;
- e_pfn = PFN_UP(entry->addr + entry->size);
+ e_pfn = PFN_DOWN(entry->addr + entry->size);
/* We only care about E820 after the xen_start_info->nr_pages */
if (e_pfn <= max_pfn)
continue;
- s_pfn = PFN_DOWN(entry->addr);
+ s_pfn = PFN_UP(entry->addr);
/* If the E820 falls within the nr_pages, we want to start
* at the nr_pages PFN.
* If that would mean going past the E820 entry, skip it
@@ -192,23 +191,19 @@ static unsigned long __init xen_populate
capacity = e_pfn - max_pfn;
dest_pfn = max_pfn;
} else {
- /* last_pfn MUST be within E820_RAM regions */
- if (*last_pfn && e_pfn >= *last_pfn)
- s_pfn = *last_pfn;
capacity = e_pfn - s_pfn;
dest_pfn = s_pfn;
}
- /* If we had filled this E820_RAM entry, go to the next one. */
- if (capacity <= 0)
- continue;
- if (credits > capacity)
- credits = capacity;
+ if (credits_left < capacity)
+ capacity = credits_left;
- pfns = xen_do_chunk(dest_pfn, dest_pfn + credits, false);
+ pfns = xen_do_chunk(dest_pfn, dest_pfn + capacity, false);
done += pfns;
- credits_left -= pfns;
*last_pfn = (dest_pfn + pfns);
+ if (pfns < capacity)
+ break;
+ credits_left -= pfns;
}
return done;
}
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 87/88] xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (84 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 86/88] xen: populate correct number of pages when across mem boundary (v2) Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 88/88] xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID Greg Kroah-Hartman
2014-06-10 15:13 ` [PATCH 3.4 00/88] 3.4.93-stable review Guenter Roeck
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Kiper, Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 5bc6f9888db5739abfa0cae279b4b442e4db8049 upstream.
When we release pages back during bootup:
Freeing 9d-100 pfn range: 99 pages freed
Freeing 9cf36-9d0d2 pfn range: 412 pages freed
Freeing 9f6bd-9f6bf pfn range: 2 pages freed
Freeing 9f714-9f7bf pfn range: 171 pages freed
Freeing 9f7e0-9f7ff pfn range: 31 pages freed
Freeing 9f800-100000 pfn range: 395264 pages freed
Released 395979 pages of unused memory
We then try to populate those pages back. In the P2M tree however
the space for those leafs must be reserved - as such we use extend_brk.
We reserve 8MB of _brk space, which means we can fit over
1048576 PFNs - which is more than we should ever need.
Without this, on certain compilation of the kernel we would hit:
(XEN) domain_crash_sync called from entry.S
(XEN) CPU: 0
(XEN) RIP: e033:[<ffffffff818aad3b>]
(XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest
(XEN) rax: ffffffff81a7c000 rbx: 000000000000003d rcx: 0000000000001000
(XEN) rdx: ffffffff81a7b000 rsi: 0000000000001000 rdi: 0000000000001000
(XEN) rbp: ffffffff81801cd8 rsp: ffffffff81801c98 r8: 0000000000100000
(XEN) r9: ffffffff81a7a000 r10: 0000000000000001 r11: 0000000000000003
(XEN) r12: 0000000000000004 r13: 0000000000000004 r14: 000000000000003d
(XEN) r15: 00000000000001e8 cr0: 000000008005003b cr4: 00000000000006f0
(XEN) cr3: 0000000125803000 cr2: 0000000000000000
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033
(XEN) Guest stack trace from rsp=ffffffff81801c98:
.. which is extend_brk hitting a BUG_ON.
Interestingly enough, most of the time we are not going to hit this
b/c the _brk space is quite large (v3.5):
ffffffff81a25000 B __brk_base
ffffffff81e43000 B __brk_limit
= ~4MB.
vs earlier kernels (with this back-ported), the space is smaller:
ffffffff81a25000 B __brk_base
ffffffff81a7b000 B __brk_limit
= 344 kBytes.
where we would certainly hit this and hit extend_brk.
Note that git commit c3d93f880197953f86ab90d9da4744e926b38e33
(xen: populate correct number of pages when across mem boundary (v2))
exposed this bug).
[v1: Made it 8MB of _brk space instead of 4MB per Jan's suggestion]
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/p2m.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -194,6 +194,11 @@ RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MA
* boundary violation will require three middle nodes. */
RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3);
+/* When we populate back during bootup, the amount of pages can vary. The
+ * max we have is seen is 395979, but that does not mean it can't be more.
+ * But some machines can have 3GB I/O holes even. So lets reserve enough
+ * for 4GB of I/O and E820 holes. */
+RESERVE_BRK(p2m_populated, PMD_SIZE * 4);
static inline unsigned p2m_top_index(unsigned long pfn)
{
BUG_ON(pfn >= MAX_P2M_PFN);
^ permalink raw reply [flat|nested] 105+ messages in thread
* [PATCH 3.4 88/88] xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID.
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (85 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 87/88] xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back Greg Kroah-Hartman
@ 2014-06-10 0:25 ` Greg Kroah-Hartman
2014-06-10 15:13 ` [PATCH 3.4 00/88] 3.4.93-stable review Guenter Roeck
87 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 0:25 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Kiper, Konrad Rzeszutek Wilk
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 250a41e0ecc433cdd553a364d0fc74c766425209 upstream.
If P2M leaf is completly packed with INVALID_P2M_ENTRY or with
1:1 PFNs (so IDENTITY_FRAME type PFNs), we can swap the P2M leaf
with either a p2m_missing or p2m_identity respectively. The old
page (which was created via extend_brk or was grafted on from the
mfn_list) can be re-used for setting new PFNs.
This also means we can remove git commit:
5bc6f9888db5739abfa0cae279b4b442e4db8049
xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back
which tried to fix this.
and make the amount that is required to be reserved much smaller.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/xen/p2m.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 92 insertions(+), 3 deletions(-)
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -196,9 +196,11 @@ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE
/* When we populate back during bootup, the amount of pages can vary. The
* max we have is seen is 395979, but that does not mean it can't be more.
- * But some machines can have 3GB I/O holes even. So lets reserve enough
- * for 4GB of I/O and E820 holes. */
-RESERVE_BRK(p2m_populated, PMD_SIZE * 4);
+ * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle
+ * it can re-use Xen provided mfn_list array, so we only need to allocate at
+ * most three P2M top nodes. */
+RESERVE_BRK(p2m_populated, PAGE_SIZE * 3);
+
static inline unsigned p2m_top_index(unsigned long pfn)
{
BUG_ON(pfn >= MAX_P2M_PFN);
@@ -575,12 +577,99 @@ static bool __init early_alloc_p2m(unsig
}
return true;
}
+
+/*
+ * Skim over the P2M tree looking at pages that are either filled with
+ * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and
+ * replace the P2M leaf with a p2m_missing or p2m_identity.
+ * Stick the old page in the new P2M tree location.
+ */
+bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn)
+{
+ unsigned topidx;
+ unsigned mididx;
+ unsigned ident_pfns;
+ unsigned inv_pfns;
+ unsigned long *p2m;
+ unsigned long *mid_mfn_p;
+ unsigned idx;
+ unsigned long pfn;
+
+ /* We only look when this entails a P2M middle layer */
+ if (p2m_index(set_pfn))
+ return false;
+
+ for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
+ topidx = p2m_top_index(pfn);
+
+ if (!p2m_top[topidx])
+ continue;
+
+ if (p2m_top[topidx] == p2m_mid_missing)
+ continue;
+
+ mididx = p2m_mid_index(pfn);
+ p2m = p2m_top[topidx][mididx];
+ if (!p2m)
+ continue;
+
+ if ((p2m == p2m_missing) || (p2m == p2m_identity))
+ continue;
+
+ if ((unsigned long)p2m == INVALID_P2M_ENTRY)
+ continue;
+
+ ident_pfns = 0;
+ inv_pfns = 0;
+ for (idx = 0; idx < P2M_PER_PAGE; idx++) {
+ /* IDENTITY_PFNs are 1:1 */
+ if (p2m[idx] == IDENTITY_FRAME(pfn + idx))
+ ident_pfns++;
+ else if (p2m[idx] == INVALID_P2M_ENTRY)
+ inv_pfns++;
+ else
+ break;
+ }
+ if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE))
+ goto found;
+ }
+ return false;
+found:
+ /* Found one, replace old with p2m_identity or p2m_missing */
+ p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing);
+ /* And the other for save/restore.. */
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ /* NOTE: Even if it is a p2m_identity it should still be point to
+ * a page filled with INVALID_P2M_ENTRY entries. */
+ mid_mfn_p[mididx] = virt_to_mfn(p2m_missing);
+
+ /* Reset where we want to stick the old page in. */
+ topidx = p2m_top_index(set_pfn);
+ mididx = p2m_mid_index(set_pfn);
+
+ /* This shouldn't happen */
+ if (WARN_ON(p2m_top[topidx] == p2m_mid_missing))
+ early_alloc_p2m(set_pfn);
+
+ if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing))
+ return false;
+
+ p2m_init(p2m);
+ p2m_top[topidx][mididx] = p2m;
+ mid_mfn_p = p2m_top_mfn_p[topidx];
+ mid_mfn_p[mididx] = virt_to_mfn(p2m);
+
+ return true;
+}
bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn)
{
if (unlikely(!__set_phys_to_machine(pfn, mfn))) {
if (!early_alloc_p2m(pfn))
return false;
+ if (early_can_reuse_p2m_middle(pfn, mfn))
+ return __set_phys_to_machine(pfn, mfn);
+
if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/))
return false;
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 65/88] mpt2sas: Fix for issue Missing delay not getting set during system bootup
2014-06-10 0:25 ` [PATCH 3.4 65/88] mpt2sas: Fix for issue Missing delay not getting set during system bootup Greg Kroah-Hartman
@ 2014-06-10 1:04 ` Ben Hutchings
0 siblings, 0 replies; 105+ messages in thread
From: Ben Hutchings @ 2014-06-10 1:04 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Sreekanth Reddy, James Bottomley, Rui Xiang
[-- Attachment #1: Type: text/plain, Size: 595 bytes --]
On Mon, 2014-06-09 at 17:25 -0700, Greg Kroah-Hartman wrote:
> 3.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: "Reddy, Sreekanth" <Sreekanth.Reddy@lsi.com>
>
> commit 93cfcb8c998e3fe2c075fa61ab28f7b018e5049a upstream.
The hash above is for 3.2.y, so you should delete it.
> commit b0df96a0068daee4f9c2189c29b9053eb6e46b17 upstream.
[...]
This is the real upstream hash.
Ben.
--
Ben Hutchings
DNRC Motto: I can please only one person per day.
Today is not your day. Tomorrow isn't looking good either.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 76/88] 8250/16?50: Add support for Broadcom TruManage redirected serial port
2014-06-10 0:25 ` [PATCH 3.4 76/88] 8250/16?50: Add support for Broadcom TruManage redirected serial port Greg Kroah-Hartman
@ 2014-06-10 1:05 ` Ben Hutchings
0 siblings, 0 replies; 105+ messages in thread
From: Ben Hutchings @ 2014-06-10 1:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Stephen Hurd, Michael Chan, Rui Xiang
[-- Attachment #1: Type: text/plain, Size: 1299 bytes --]
On Mon, 2014-06-09 at 17:25 -0700, Greg Kroah-Hartman wrote:
> 3.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Stephen Hurd <shurd@broadcom.com>
>
> commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream.
>
> Add support for the UART device present in Broadcom TruManage capable
> NetXtreme chips (ie: 5761m 5762, and 5725).
>
> This implementation has a hidden transmit FIFO, so running in single-byte
> interrupt mode results in too many interrupts. The UART_CAP_HFIFO
> capability was added to track this. It continues to reload the THR as long
> as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
> is used here).
>
> Signed-off-by: Stephen Hurd <shurd@broadcom.com>
> Signed-off-by: Michael Chan <mchan@broadcom.com>
> [xr: Backported to 3.4:
> - Adjust filenames
> - Adjust context
> - PORT_BRCM_TRUMANAGE is 22 not 24]
This last line isn't true any more.
Ben.
> Cc: Ben Hutchings <ben@decadent.org.uk>
> Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[...]
--
Ben Hutchings
DNRC Motto: I can please only one person per day.
Today is not your day. Tomorrow isn't looking good either.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 47/88] mm: add kmap_to_page()
2014-06-10 0:24 ` [PATCH 3.4 47/88] mm: add kmap_to_page() Greg Kroah-Hartman
@ 2014-06-10 1:15 ` Hugh Dickins
2014-06-10 1:21 ` Ben Hutchings
2014-06-10 8:04 ` Yijing Wang
0 siblings, 2 replies; 105+ messages in thread
From: Hugh Dickins @ 2014-06-10 1:15 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Mel Gorman, Rik van Riel, Andrew Morton,
Ben Hutchings, Yijing Wang, Will Deacon
On Mon, 9 Jun 2014, Greg Kroah-Hartman wrote:
> 3.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Ben Hutchings <ben@decadent.org.uk>
>
> commit fcb8996728fb59eddf84678df7cb213b2c9a2e26 upstream.
>
> This is extracted from Mel Gorman's commit 5a178119b0fb ('mm: add
> support for direct_IO to highmem pages') upstream.
>
> Required to backport commit b9cdc88df8e6 ('virtio: 9p: correctly pass
> physical address to userspace for high pages').
>
> Cc: Mel Gorman <mgorman@suse.de>
> Cc: Rik van Riel <riel@redhat.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> Cc: Yijing Wang <wangyijing@huawei.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> include/linux/highmem.h | 7 +++++++
> mm/highmem.c | 12 ++++++++++++
> 2 files changed, 19 insertions(+)
>
> --- a/include/linux/highmem.h
> +++ b/include/linux/highmem.h
> @@ -39,10 +39,17 @@ extern unsigned long totalhigh_pages;
>
> void kmap_flush_unused(void);
>
> +struct page *kmap_to_page(void *addr);
> +
> #else /* CONFIG_HIGHMEM */
>
> static inline unsigned int nr_free_highpages(void) { return 0; }
>
> +static inline struct page *kmap_to_page(void *addr)
> +{
> + return virt_to_page(addr);
> +}
> +
> #define totalhigh_pages 0UL
>
> #ifndef ARCH_HAS_KMAP
> --- a/mm/highmem.c
> +++ b/mm/highmem.c
> @@ -94,6 +94,18 @@ static DECLARE_WAIT_QUEUE_HEAD(pkmap_map
> do { spin_unlock(&kmap_lock); (void)(flags); } while (0)
> #endif
>
> +struct page *kmap_to_page(void *vaddr)
> +{
> + unsigned long addr = (unsigned long)vaddr;
> +
> + if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
> + int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
> + return pte_page(pkmap_page_table[i]);
> + }
> +
> + return virt_to_page(addr);
> +}
> +
> static void flush_all_zero_pkmaps(void)
> {
> int i;
I think this needs the following on top:
commit 498c2280212327858e521e9d21345d4cc2637f54
Author: Will Deacon <will.deacon@arm.com>
Date: Fri Nov 16 14:15:00 2012 -0800
mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address
kmap_to_page returns the corresponding struct page for a virtual address
of an arbitrary mapping. This works by checking whether the address
falls in the pkmap region and using the pkmap page tables instead of the
linear mapping if appropriate.
Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is
incorrectly treated as a highmem address and we can end up walking off
the end of pkmap_page_table and subsequently passing junk to pte_page.
This patch fixes the bound check to stay within the pkmap tables.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/mm/highmem.c b/mm/highmem.c
index d517cd16a6eb..2da13a5c50e2 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -98,7 +98,7 @@ struct page *kmap_to_page(void *vaddr)
{
unsigned long addr = (unsigned long)vaddr;
- if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
+ if (addr >= PKMAP_ADDR(0) && addr < PKMAP_ADDR(LAST_PKMAP)) {
int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
return pte_page(pkmap_page_table[i]);
}
^ permalink raw reply related [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 47/88] mm: add kmap_to_page()
2014-06-10 1:15 ` Hugh Dickins
@ 2014-06-10 1:21 ` Ben Hutchings
2014-06-10 8:04 ` Yijing Wang
1 sibling, 0 replies; 105+ messages in thread
From: Ben Hutchings @ 2014-06-10 1:21 UTC (permalink / raw)
To: Hugh Dickins
Cc: Greg Kroah-Hartman, linux-kernel, stable, Mel Gorman,
Rik van Riel, Andrew Morton, Yijing Wang, Will Deacon
[-- Attachment #1: Type: text/plain, Size: 2612 bytes --]
On Mon, 2014-06-09 at 18:15 -0700, Hugh Dickins wrote:
> On Mon, 9 Jun 2014, Greg Kroah-Hartman wrote:
>
> > 3.4-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Ben Hutchings <ben@decadent.org.uk>
> >
> > commit fcb8996728fb59eddf84678df7cb213b2c9a2e26 upstream.
> >
> > This is extracted from Mel Gorman's commit 5a178119b0fb ('mm: add
> > support for direct_IO to highmem pages') upstream.
> >
> > Required to backport commit b9cdc88df8e6 ('virtio: 9p: correctly pass
> > physical address to userspace for high pages').
> >
> > Cc: Mel Gorman <mgorman@suse.de>
> > Cc: Rik van Riel <riel@redhat.com>
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> > Cc: Yijing Wang <wangyijing@huawei.com>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > ---
> > include/linux/highmem.h | 7 +++++++
> > mm/highmem.c | 12 ++++++++++++
> > 2 files changed, 19 insertions(+)
> >
> > --- a/include/linux/highmem.h
> > +++ b/include/linux/highmem.h
> > @@ -39,10 +39,17 @@ extern unsigned long totalhigh_pages;
> >
> > void kmap_flush_unused(void);
> >
> > +struct page *kmap_to_page(void *addr);
> > +
> > #else /* CONFIG_HIGHMEM */
> >
> > static inline unsigned int nr_free_highpages(void) { return 0; }
> >
> > +static inline struct page *kmap_to_page(void *addr)
> > +{
> > + return virt_to_page(addr);
> > +}
> > +
> > #define totalhigh_pages 0UL
> >
> > #ifndef ARCH_HAS_KMAP
> > --- a/mm/highmem.c
> > +++ b/mm/highmem.c
> > @@ -94,6 +94,18 @@ static DECLARE_WAIT_QUEUE_HEAD(pkmap_map
> > do { spin_unlock(&kmap_lock); (void)(flags); } while (0)
> > #endif
> >
> > +struct page *kmap_to_page(void *vaddr)
> > +{
> > + unsigned long addr = (unsigned long)vaddr;
> > +
> > + if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
> > + int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
> > + return pte_page(pkmap_page_table[i]);
> > + }
> > +
> > + return virt_to_page(addr);
> > +}
> > +
> > static void flush_all_zero_pkmaps(void)
> > {
> > int i;
>
> I think this needs the following on top:
>
> commit 498c2280212327858e521e9d21345d4cc2637f54
> Author: Will Deacon <will.deacon@arm.com>
> Date: Fri Nov 16 14:15:00 2012 -0800
>
> mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address
[...]
Thanks Hugh, I've queued this up for 3.2 (where I previously added
kmap_to_page()).
Ben.
--
Ben Hutchings
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 47/88] mm: add kmap_to_page()
2014-06-10 1:15 ` Hugh Dickins
2014-06-10 1:21 ` Ben Hutchings
@ 2014-06-10 8:04 ` Yijing Wang
2014-06-10 20:50 ` Greg Kroah-Hartman
1 sibling, 1 reply; 105+ messages in thread
From: Yijing Wang @ 2014-06-10 8:04 UTC (permalink / raw)
To: Hugh Dickins, Greg Kroah-Hartman
Cc: linux-kernel, stable, Mel Gorman, Rik van Riel, Andrew Morton,
Ben Hutchings, Will Deacon
>> +struct page *kmap_to_page(void *vaddr)
>> +{
>> + unsigned long addr = (unsigned long)vaddr;
>> +
>> + if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
>> + int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
>> + return pte_page(pkmap_page_table[i]);
>> + }
>> +
>> + return virt_to_page(addr);
>> +}
>> +
>> static void flush_all_zero_pkmaps(void)
>> {
>> int i;
>
> I think this needs the following on top:
>
> commit 498c2280212327858e521e9d21345d4cc2637f54
> Author: Will Deacon <will.deacon@arm.com>
> Date: Fri Nov 16 14:15:00 2012 -0800
>
Thanks Hugh. Hi Greg, please pick up this fix patch, Thanks a lot!
Yijing.
> mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address
>
> kmap_to_page returns the corresponding struct page for a virtual address
> of an arbitrary mapping. This works by checking whether the address
> falls in the pkmap region and using the pkmap page tables instead of the
> linear mapping if appropriate.
>
> Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is
> incorrectly treated as a highmem address and we can end up walking off
> the end of pkmap_page_table and subsequently passing junk to pte_page.
>
> This patch fixes the bound check to stay within the pkmap tables.
>
> Signed-off-by: Will Deacon <will.deacon@arm.com>
> Cc: Mel Gorman <mgorman@suse.de>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
>
> diff --git a/mm/highmem.c b/mm/highmem.c
> index d517cd16a6eb..2da13a5c50e2 100644
> --- a/mm/highmem.c
> +++ b/mm/highmem.c
> @@ -98,7 +98,7 @@ struct page *kmap_to_page(void *vaddr)
> {
> unsigned long addr = (unsigned long)vaddr;
>
> - if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
> + if (addr >= PKMAP_ADDR(0) && addr < PKMAP_ADDR(LAST_PKMAP)) {
> int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
> return pte_page(pkmap_page_table[i]);
> }
>
>
> .
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
2014-06-10 0:25 ` [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM Greg Kroah-Hartman
@ 2014-06-10 9:07 ` David Vrabel
2014-06-10 9:30 ` Daniel Kiper
0 siblings, 1 reply; 105+ messages in thread
From: David Vrabel @ 2014-06-10 9:07 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, Konrad Rzeszutek Wilk, Daniel Kiper
On 10/06/14 01:25, Greg Kroah-Hartman wrote:
> 3.4-stable review patch. If anyone has any objections, please let me know.
This is a new feature and not a bug fix. I don't think it (and patches
83-85) are suitable for stable.
David
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
2014-06-10 9:07 ` David Vrabel
@ 2014-06-10 9:30 ` Daniel Kiper
2014-06-10 13:18 ` David Vrabel
0 siblings, 1 reply; 105+ messages in thread
From: Daniel Kiper @ 2014-06-10 9:30 UTC (permalink / raw)
To: David Vrabel
Cc: Greg Kroah-Hartman, linux-kernel, stable, Konrad Rzeszutek Wilk
On Tue, Jun 10, 2014 at 10:07:27AM +0100, David Vrabel wrote:
> On 10/06/14 01:25, Greg Kroah-Hartman wrote:
> > 3.4-stable review patch. If anyone has any objections, please let me know.
>
> This is a new feature and not a bug fix. I don't think it (and patches
> 83-85) are suitable for stable.
IIRC, this is the main patch fixing dom0 memory looses.
Earlier patches are preparatory stuff and later ones are
fixing bugs introduced by this patch and others. Konrad and I
picked only minimal set of patches to fix that issue in 3.4.
Daniel
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
2014-06-10 9:30 ` Daniel Kiper
@ 2014-06-10 13:18 ` David Vrabel
2014-06-10 18:45 ` Greg Kroah-Hartman
2014-06-10 20:44 ` Greg Kroah-Hartman
0 siblings, 2 replies; 105+ messages in thread
From: David Vrabel @ 2014-06-10 13:18 UTC (permalink / raw)
To: Daniel Kiper
Cc: Greg Kroah-Hartman, linux-kernel, stable, Konrad Rzeszutek Wilk
On 10/06/14 10:30, Daniel Kiper wrote:
> On Tue, Jun 10, 2014 at 10:07:27AM +0100, David Vrabel wrote:
>> On 10/06/14 01:25, Greg Kroah-Hartman wrote:
>>> 3.4-stable review patch. If anyone has any objections, please let me know.
>>
>> This is a new feature and not a bug fix. I don't think it (and patches
>> 83-85) are suitable for stable.
>
> IIRC, this is the main patch fixing dom0 memory looses.
> Earlier patches are preparatory stuff and later ones are
> fixing bugs introduced by this patch and others. Konrad and I
> picked only minimal set of patches to fix that issue in 3.4.
This is not a bug fix. dom0 was previously required to use the balloon
driver to recover memory freed during setup. This was annoying but not
a bug.
This patches makes significant changes to how much memory dom0 ends up.
Depending on hardware, the dom0_mem option, and the (non)use of the
balloon driver applying this could result is between 1 - 3 GB of
additional memory allocated to dom0. This could result in there being
insufficient host memory available to start a VM.
Please do not add to 3.4.y.
David
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 00/88] 3.4.93-stable review
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
` (86 preceding siblings ...)
2014-06-10 0:25 ` [PATCH 3.4 88/88] xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID Greg Kroah-Hartman
@ 2014-06-10 15:13 ` Guenter Roeck
2014-06-10 18:45 ` Greg Kroah-Hartman
87 siblings, 1 reply; 105+ messages in thread
From: Guenter Roeck @ 2014-06-10 15:13 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, satoru.takeuchi, shuah.kh, stable
On 06/09/2014 05:24 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.4.93 release.
> There are 88 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jun 12 00:24:06 UTC 2014.
> Anything received after that time might be too late.
>
Build results:
total: 136 pass: 109 skipped: 20 fail: 7
Qemu tests all passed.
Results are as expected.
Details are available at http://server.roeck-us.net:8010/builders.
Guenter
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
2014-06-10 13:18 ` David Vrabel
@ 2014-06-10 18:45 ` Greg Kroah-Hartman
2014-06-10 19:39 ` Daniel Kiper
2014-06-10 20:44 ` Greg Kroah-Hartman
1 sibling, 1 reply; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 18:45 UTC (permalink / raw)
To: David Vrabel; +Cc: Daniel Kiper, linux-kernel, stable, Konrad Rzeszutek Wilk
On Tue, Jun 10, 2014 at 02:18:16PM +0100, David Vrabel wrote:
> On 10/06/14 10:30, Daniel Kiper wrote:
> > On Tue, Jun 10, 2014 at 10:07:27AM +0100, David Vrabel wrote:
> >> On 10/06/14 01:25, Greg Kroah-Hartman wrote:
> >>> 3.4-stable review patch. If anyone has any objections, please let me know.
> >>
> >> This is a new feature and not a bug fix. I don't think it (and patches
> >> 83-85) are suitable for stable.
> >
> > IIRC, this is the main patch fixing dom0 memory looses.
> > Earlier patches are preparatory stuff and later ones are
> > fixing bugs introduced by this patch and others. Konrad and I
> > picked only minimal set of patches to fix that issue in 3.4.
>
> This is not a bug fix. dom0 was previously required to use the balloon
> driver to recover memory freed during setup. This was annoying but not
> a bug.
>
> This patches makes significant changes to how much memory dom0 ends up.
> Depending on hardware, the dom0_mem option, and the (non)use of the
> balloon driver applying this could result is between 1 - 3 GB of
> additional memory allocated to dom0. This could result in there being
> insufficient host memory available to start a VM.
>
> Please do not add to 3.4.y.
Ok, fun stuff, I have two maintainers of the same subsystem arguing over
if the patches should be sent to the stable tree.
So, what do I do, any ideas? Flip a coin? Ask the third maintainer
(Boris) to break the tie?
Konrad and Daniel, are distros using this patchset in 3.4 releases?
What made you want to create them in the first place? Who was
complaining that warranted this work being done?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 00/88] 3.4.93-stable review
2014-06-10 15:13 ` [PATCH 3.4 00/88] 3.4.93-stable review Guenter Roeck
@ 2014-06-10 18:45 ` Greg Kroah-Hartman
0 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 18:45 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-kernel, torvalds, akpm, satoru.takeuchi, shuah.kh, stable
On Tue, Jun 10, 2014 at 08:13:27AM -0700, Guenter Roeck wrote:
> On 06/09/2014 05:24 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 3.4.93 release.
> >There are 88 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Thu Jun 12 00:24:06 UTC 2014.
> >Anything received after that time might be too late.
> >
> Build results:
> total: 136 pass: 109 skipped: 20 fail: 7
>
> Qemu tests all passed.
>
> Results are as expected.
> Details are available at http://server.roeck-us.net:8010/builders.
Thanks.
greg k-h
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
2014-06-10 18:45 ` Greg Kroah-Hartman
@ 2014-06-10 19:39 ` Daniel Kiper
0 siblings, 0 replies; 105+ messages in thread
From: Daniel Kiper @ 2014-06-10 19:39 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: David Vrabel, linux-kernel, stable, Konrad Rzeszutek Wilk
On Tue, Jun 10, 2014 at 11:45:37AM -0700, Greg Kroah-Hartman wrote:
> On Tue, Jun 10, 2014 at 02:18:16PM +0100, David Vrabel wrote:
> > On 10/06/14 10:30, Daniel Kiper wrote:
> > > On Tue, Jun 10, 2014 at 10:07:27AM +0100, David Vrabel wrote:
> > >> On 10/06/14 01:25, Greg Kroah-Hartman wrote:
> > >>> 3.4-stable review patch. If anyone has any objections, please let me know.
> > >>
> > >> This is a new feature and not a bug fix. I don't think it (and patches
> > >> 83-85) are suitable for stable.
> > >
> > > IIRC, this is the main patch fixing dom0 memory looses.
> > > Earlier patches are preparatory stuff and later ones are
> > > fixing bugs introduced by this patch and others. Konrad and I
> > > picked only minimal set of patches to fix that issue in 3.4.
> >
> > This is not a bug fix. dom0 was previously required to use the balloon
> > driver to recover memory freed during setup. This was annoying but not
> > a bug.
> >
> > This patches makes significant changes to how much memory dom0 ends up.
> > Depending on hardware, the dom0_mem option, and the (non)use of the
> > balloon driver applying this could result is between 1 - 3 GB of
> > additional memory allocated to dom0. This could result in there being
> > insufficient host memory available to start a VM.
> >
> > Please do not add to 3.4.y.
>
> Ok, fun stuff, I have two maintainers of the same subsystem arguing over
> if the patches should be sent to the stable tree.
>
> So, what do I do, any ideas? Flip a coin? Ask the third maintainer
> (Boris) to break the tie?
>
> Konrad and Daniel, are distros using this patchset in 3.4 releases?
> What made you want to create them in the first place? Who was
> complaining that warranted this work being done?
I use this kernel version in my private production systems. I thought
that it is worth posting such fixes and make them part of stable.
However, as I can see David (who is maintainer) has some concerns,
Konrad (who is maintainer) was also not so strongly convinced to post
them, Boris (who is maintainer) is not involved and I am not maintainer.
So I think that in this situation you should drop them. Sorry for confusion.
Daniel
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
2014-06-10 13:18 ` David Vrabel
2014-06-10 18:45 ` Greg Kroah-Hartman
@ 2014-06-10 20:44 ` Greg Kroah-Hartman
1 sibling, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 20:44 UTC (permalink / raw)
To: David Vrabel; +Cc: Daniel Kiper, linux-kernel, stable, Konrad Rzeszutek Wilk
On Tue, Jun 10, 2014 at 02:18:16PM +0100, David Vrabel wrote:
> On 10/06/14 10:30, Daniel Kiper wrote:
> > On Tue, Jun 10, 2014 at 10:07:27AM +0100, David Vrabel wrote:
> >> On 10/06/14 01:25, Greg Kroah-Hartman wrote:
> >>> 3.4-stable review patch. If anyone has any objections, please let me know.
> >>
> >> This is a new feature and not a bug fix. I don't think it (and patches
> >> 83-85) are suitable for stable.
> >
> > IIRC, this is the main patch fixing dom0 memory looses.
> > Earlier patches are preparatory stuff and later ones are
> > fixing bugs introduced by this patch and others. Konrad and I
> > picked only minimal set of patches to fix that issue in 3.4.
>
> This is not a bug fix. dom0 was previously required to use the balloon
> driver to recover memory freed during setup. This was annoying but not
> a bug.
>
> This patches makes significant changes to how much memory dom0 ends up.
> Depending on hardware, the dom0_mem option, and the (non)use of the
> balloon driver applying this could result is between 1 - 3 GB of
> additional memory allocated to dom0. This could result in there being
> insufficient host memory available to start a VM.
>
> Please do not add to 3.4.y.
Ok, I'll go drop these now, thanks.
greg k-h
^ permalink raw reply [flat|nested] 105+ messages in thread
* Re: [PATCH 3.4 47/88] mm: add kmap_to_page()
2014-06-10 8:04 ` Yijing Wang
@ 2014-06-10 20:50 ` Greg Kroah-Hartman
0 siblings, 0 replies; 105+ messages in thread
From: Greg Kroah-Hartman @ 2014-06-10 20:50 UTC (permalink / raw)
To: Yijing Wang
Cc: Hugh Dickins, linux-kernel, stable, Mel Gorman, Rik van Riel,
Andrew Morton, Ben Hutchings, Will Deacon
On Tue, Jun 10, 2014 at 04:04:53PM +0800, Yijing Wang wrote:
> >> +struct page *kmap_to_page(void *vaddr)
> >> +{
> >> + unsigned long addr = (unsigned long)vaddr;
> >> +
> >> + if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
> >> + int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
> >> + return pte_page(pkmap_page_table[i]);
> >> + }
> >> +
> >> + return virt_to_page(addr);
> >> +}
> >> +
> >> static void flush_all_zero_pkmaps(void)
> >> {
> >> int i;
> >
> > I think this needs the following on top:
> >
> > commit 498c2280212327858e521e9d21345d4cc2637f54
> > Author: Will Deacon <will.deacon@arm.com>
> > Date: Fri Nov 16 14:15:00 2012 -0800
> >
>
> Thanks Hugh. Hi Greg, please pick up this fix patch, Thanks a lot!
Now applied, thanks!
greg k-h
^ permalink raw reply [flat|nested] 105+ messages in thread
end of thread, other threads:[~2014-06-10 20:47 UTC | newest]
Thread overview: 105+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-06-10 0:24 [PATCH 3.4 00/88] 3.4.93-stable review Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 01/88] sched: Use CPUPRI_NR_PRIORITIES instead of MAX_RT_PRIO in cpupri check Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 02/88] perf: Prevent false warning in perf_swevent_add Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 03/88] perf: Limit perf_event_attr::sample_period to 63 bits Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 04/88] perf: Fix race in removing an event Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 05/88] mm/memory-failure.c: fix memory leak by race between poison and unpoison Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 06/88] ARM: 8051/1: put_user: fix possible data corruption in put_user Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 07/88] sched: Fix hotplug vs. set_cpus_allowed_ptr() Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 08/88] md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync" Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 10/88] Staging: speakup: Move pasting into a work item Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 11/88] ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 12/88] ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 13/88] USB: ftdi_sio: add NovaTech OrionLXm product ID Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 14/88] USB: serial: option: add support for Novatel E371 PCIe card Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 15/88] USB: io_ti: fix firmware download on big-endian machines (part 2) Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 16/88] USB: Avoid runtime suspend loops for HCDs that cant handle suspend/resume Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 17/88] mm: rmap: fix use-after-free in __put_anon_vma Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 18/88] Bluetooth: Fix missing length checks for L2CAP signalling PDUs Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 19/88] Bluetooth: Fix invalid length check in l2cap_information_rsp() Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 20/88] Bluetooth: Support AR3011 in Acer Iconia Tab W500 Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 21/88] Bluetooth: add support for atheros 0930:0219 Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 22/88] Bluetooth: add support for atheros 0489:e057 Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 23/88] Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 24/88] Bluetooth: Add support for Sony Vaio T-Series Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 25/88] Bluetooth: Add USB_VENDOR_AND_INTERFACE_INFO() for Broadcom/Foxconn Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 26/88] Bluetooth: Add support for BCM20702A0 [04ca, 2003] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 27/88] Bluetooth: Add support for BCM20702A0 [0b05, 17b5] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 28/88] Bluetooth: Add support for IMC Networks [13d3:3393] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 29/88] Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 30/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 31/88] Bluetooth: Add support for Foxconn / Hon Hai [0489:e056] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 32/88] Bluetooth device 04ca:3008 should use ath3k Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 33/88] Bluetooth: Add support for atheros 04ca:3004 device to ath3k Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 34/88] Bluetooth: Device 0cf3:3008 should map AR 3012 Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 35/88] Bluetooth: Add support for Foxconn/Hon Hai [0489:e04d] Greg Kroah-Hartman
2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 36/88] Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 37/88] Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 38/88] Bluetooth: ath3k: Add support for ID 0x13d3/0x3402 Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 39/88] Bluetooth: Add support for Atheros [0cf3:3121] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 40/88] Bluetooth: Add support for Atheros [0cf3:e003] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 41/88] Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012 Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 42/88] Bluetooth: Add support for BCM20702A0 [0b05, 17cb] Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 43/88] virtio_blk: Drop unused request tracking list Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 44/88] virtio-blk: Fix hot-unplug race in remove method Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 45/88] virtio-blk: Call del_gendisk() before disable guest kick Greg Kroah-Hartman
2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 46/88] virtio-blk: Reset device after blk_cleanup_queue() Greg Kroah-Hartman
2014-06-10 0:24 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 47/88] mm: add kmap_to_page() Greg Kroah-Hartman
2014-06-10 1:15 ` Hugh Dickins
2014-06-10 1:21 ` Ben Hutchings
2014-06-10 8:04 ` Yijing Wang
2014-06-10 20:50 ` Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 48/88] mm: highmem: export kmap_to_page for modules Greg Kroah-Hartman
2014-06-10 0:24 ` [PATCH 3.4 49/88] virtio: 9p: correctly pass physical address to userspace for high pages Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 50/88] virtio-blk: Dont free ida when disk is in use Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 51/88] virtio_console: fix uapi header Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 52/88] virtio: console: rename cvq_lock to c_ivq_lock Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 53/88] virtio: console: add locking around c_ovq operations Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 54/88] nfsd: pass net to nfsd_init_socks() Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 55/88] nfsd: pass net to nfsd_startup() and nfsd_shutdown() Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 56/88] nfsd: pass net to nfsd_create_serv() Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 57/88] nfsd: pass net to nfsd_svc() Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 58/88] nfsd: pass net to nfsd_set_nrthreads() Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 59/88] nfsd: pass net to __write_ports() and down Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 60/88] nfsd: pass proper net to nfsd_destroy() from NFSd kthreads Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 61/88] nfsd: containerize NFSd filesystem Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 62/88] nfsd: check passed sockets net matches NFSd superblocks one Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 63/88] isci: Fix a race condition in the SSP task management path Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 64/88] mpt2sas: Fix for device scan following host reset could get stuck in a infinite loop Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 65/88] mpt2sas: Fix for issue Missing delay not getting set during system bootup Greg Kroah-Hartman
2014-06-10 1:04 ` Ben Hutchings
2014-06-10 0:25 ` [PATCH 3.4 66/88] hpsa: gen8plus Smart Array IDs Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 67/88] iscsi-target: Always send a response before terminating iSCSI connection Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 68/88] target/pscsi: fix return value check Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 69/88] target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 70/88] target: use correct sense code for LUN communication failure Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 71/88] target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 72/88] serial: pch_uart: fix tty-kref leak in dma-rx path Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 73/88] serial: pch_uart: fix tty-kref leak in rx-error path Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 74/88] tty: Correct tty buffer flush Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 75/88] Fix 4 port and add support for 8 port Unknown PCI serial port cards Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 76/88] 8250/16?50: Add support for Broadcom TruManage redirected serial port Greg Kroah-Hartman
2014-06-10 1:05 ` Ben Hutchings
2014-06-10 0:25 ` [PATCH 3.4 77/88] tty/serial: Add support for Altera " Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 78/88] xen/p2m: Move code around to allow for better re-usage Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 79/88] xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on argument Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 80/88] xen/p2m: Collapse early_alloc_p2m_middle redundant checks Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 81/88] xen/p2m: An early bootup variant of set_phys_to_machine Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 82/88] xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM Greg Kroah-Hartman
2014-06-10 9:07 ` David Vrabel
2014-06-10 9:30 ` Daniel Kiper
2014-06-10 13:18 ` David Vrabel
2014-06-10 18:45 ` Greg Kroah-Hartman
2014-06-10 19:39 ` Daniel Kiper
2014-06-10 20:44 ` Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 83/88] xen/setup: Combine the two hypercall functions - since they are quite similar Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 84/88] xen/setup: update VA mapping when releasing memory during setup Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 85/88] xen/balloon: Subtract from xen_released_pages the count that is populated Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 86/88] xen: populate correct number of pages when across mem boundary (v2) Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 87/88] xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back Greg Kroah-Hartman
2014-06-10 0:25 ` [PATCH 3.4 88/88] xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID Greg Kroah-Hartman
2014-06-10 15:13 ` [PATCH 3.4 00/88] 3.4.93-stable review Guenter Roeck
2014-06-10 18:45 ` Greg Kroah-Hartman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.