* [i-g-t 1/7] README: update piglit instructions
@ 2014-06-10 14:30 Thomas Wood
2014-06-10 14:30 ` [i-g-t 2/7] lib: remove /** from comments that are not API documentation Thomas Wood
` (6 more replies)
0 siblings, 7 replies; 21+ messages in thread
From: Thomas Wood @ 2014-06-10 14:30 UTC (permalink / raw)
To: intel-gfx
Piglit now has a top level "piglit" command and the location of the
tests can now be read from an environment variable.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
---
README | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/README b/README
index 2cfb5c5..cfa186d 100644
--- a/README
+++ b/README
@@ -34,32 +34,25 @@ tests/
git://anongit.freedesktop.org/piglit
- and build it (no need to install anything). Then we need to link up the
- i-g-t sources with piglit
+ There is no need to build and install piglit if it is only going to be
+ used for running i-g-t tests.
+
+ Set the IGT_TEST_ROOT environment variable to point to the tests
+ directory or link up the i-g-t sources with piglit using a symlink:
piglit-sources $ cd bin
piglit-sources/bin $ ln $i-g-t-sources igt -s
- To avoid some hassles with piglit's use of Waffle just disable it. Run
-
- piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF .
-
- With
-
- piglit-sources $ ccmake .
-
- you can check your configuration with a curses interface, too.
-
- The tests in the i-g-t sources need to have been built already. Then we
- can run the testcases with (as usual as root, no other drm clients
- running):
+ In both cases, the tests in the i-g-t sources need to have been built
+ already. Then we can run the testcases with (as usual as root, no other
+ drm clients running):
- piglit-sources # ./piglit-run.py igt <results-file>
+ piglit-sources # ./piglit run igt <results-file>
The testlist is built at runtime, so no need to update anything in
piglit when adding new tests. See
- piglit-sources $ ./piglit-run.py -h
+ piglit-sources $ ./piglit run -h
for some useful options.
--
1.9.3
^ permalink raw reply related [flat|nested] 21+ messages in thread* [i-g-t 2/7] lib: remove /** from comments that are not API documentation 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood @ 2014-06-10 14:30 ` Thomas Wood 2014-06-10 14:30 ` [i-g-t 3/7] README: update the section on modifying and rebuilding documentation Thomas Wood ` (5 subsequent siblings) 6 siblings, 0 replies; 21+ messages in thread From: Thomas Wood @ 2014-06-10 14:30 UTC (permalink / raw) To: intel-gfx These comments are not gtk-doc comments, so replacing /** with /* prevents any gtk-doc warnings. Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- lib/i915_3d.h | 26 ++-- lib/intel_reg.h | 404 +++++++++++++++++++++++++------------------------- lib/rendercopy_gen8.c | 6 +- 3 files changed, 218 insertions(+), 218 deletions(-) diff --git a/lib/i915_3d.h b/lib/i915_3d.h index 04531f3..eea379c 100644 --- a/lib/i915_3d.h +++ b/lib/i915_3d.h @@ -324,7 +324,7 @@ enum i915_fs_channel { (z##_CHANNEL_VAL << Z_CHANNEL_SHIFT) | \ (w##_CHANNEL_VAL << W_CHANNEL_SHIFT) -/** +/* * Construct an operand description for using a register with no swizzling */ #define i915_fs_operand_reg(reg) \ @@ -333,17 +333,17 @@ enum i915_fs_channel { #define i915_fs_operand_reg_negate(reg) \ i915_fs_operand(reg, NEG_X, NEG_Y, NEG_Z, NEG_W) -/** +/* * Returns an operand containing (0.0, 0.0, 0.0, 0.0). */ #define i915_fs_operand_zero() i915_fs_operand(FS_R0, ZERO, ZERO, ZERO, ZERO) -/** +/* * Returns an unused operand */ #define i915_fs_operand_none() i915_fs_operand_zero() -/** +/* * Returns an operand containing (1.0, 1.0, 1.0, 1.0). */ #define i915_fs_operand_one() i915_fs_operand(FS_R0, ONE, ONE, ONE, ONE) @@ -351,7 +351,7 @@ enum i915_fs_channel { #define i915_get_hardware_channel_val(val, shift, negate) \ (((val & 0x7) << shift) | ((val & 0x8) ? negate : 0)) -/** +/* * Outputs a fragment shader command to declare a sampler or texture register. */ #define i915_fs_dcl(reg) \ @@ -519,19 +519,19 @@ enum i915_fs_channel { i915_fs_operand_none(), \ i915_fs_operand_none()) -/** Add operand0 and operand1 and put the result in dest_reg */ +/* Add operand0 and operand1 and put the result in dest_reg */ #define i915_fs_add(dest_reg, operand0, operand1) \ i915_fs_arith (ADD, dest_reg, \ operand0, operand1, \ i915_fs_operand_none()) -/** Multiply operand0 and operand1 and put the result in dest_reg */ +/* Multiply operand0 and operand1 and put the result in dest_reg */ #define i915_fs_mul(dest_reg, operand0, operand1) \ i915_fs_arith (MUL, dest_reg, \ operand0, operand1, \ i915_fs_operand_none()) -/** Computes 1/sqrt(operand0.replicate_swizzle) puts the result in dest_reg */ +/* Computes 1/sqrt(operand0.replicate_swizzle) puts the result in dest_reg */ #define i915_fs_rsq(dest_reg, dest_mask, operand0) \ do { \ if (dest_mask) { \ @@ -547,13 +547,13 @@ enum i915_fs_channel { } \ } while (0) -/** Puts the minimum of operand0 and operand1 in dest_reg */ +/* Puts the minimum of operand0 and operand1 in dest_reg */ #define i915_fs_min(dest_reg, operand0, operand1) \ i915_fs_arith (MIN, dest_reg, \ operand0, operand1, \ i915_fs_operand_none()) -/** Puts the maximum of operand0 and operand1 in dest_reg */ +/* Puts the maximum of operand0 and operand1 in dest_reg */ #define i915_fs_max(dest_reg, operand0, operand1) \ i915_fs_arith (MAX, dest_reg, \ operand0, operand1, \ @@ -562,7 +562,7 @@ enum i915_fs_channel { #define i915_fs_cmp(dest_reg, operand0, operand1, operand2) \ i915_fs_arith (CMP, dest_reg, operand0, operand1, operand2) -/** Perform operand0 * operand1 + operand2 and put the result in dest_reg */ +/* Perform operand0 * operand1 + operand2 and put the result in dest_reg */ #define i915_fs_mad(dest_reg, dest_mask, op0, op1, op2) \ do { \ if (dest_mask) { \ @@ -581,7 +581,7 @@ enum i915_fs_channel { } \ } while (0) -/** +/* * Perform a 3-component dot-product of operand0 and operand1 and put the * resulting scalar in the channels of dest_reg specified by the dest_mask. */ @@ -597,7 +597,7 @@ enum i915_fs_channel { } \ } while (0) -/** +/* * Sets up local state for accumulating a fragment shader buffer. * * \param x maximum number of shader commands that may be used between diff --git a/lib/intel_reg.h b/lib/intel_reg.h index 84e05e4..f8ad71f 100644 --- a/lib/intel_reg.h +++ b/lib/intel_reg.h @@ -26,7 +26,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. **************************************************************************/ -/** @file +/* @file * Register names and fields for Intel graphics. */ @@ -322,19 +322,19 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define VCLK_DIVISOR_VGA0 0x6000 #define VCLK_DIVISOR_VGA1 0x6004 #define VCLK_POST_DIV 0x6010 -/** Selects a post divisor of 4 instead of 2. */ +/* Selects a post divisor of 4 instead of 2. */ # define VGA1_PD_P2_DIV_4 (1 << 15) -/** Overrides the p2 post divisor field */ +/* Overrides the p2 post divisor field */ # define VGA1_PD_P1_DIV_2 (1 << 13) # define VGA1_PD_P1_SHIFT 8 -/** P1 value is 2 greater than this field */ +/* P1 value is 2 greater than this field */ # define VGA1_PD_P1_MASK (0x1f << 8) -/** Selects a post divisor of 4 instead of 2. */ +/* Selects a post divisor of 4 instead of 2. */ # define VGA0_PD_P2_DIV_4 (1 << 7) -/** Overrides the p2 post divisor field */ +/* Overrides the p2 post divisor field */ # define VGA0_PD_P1_DIV_2 (1 << 5) # define VGA0_PD_P1_SHIFT 0 -/** P1 value is 2 greater than this field */ +/* P1 value is 2 greater than this field */ # define VGA0_PD_P1_MASK (0x1f << 0) #define POST_DIV_SELECT 0x70 @@ -571,7 +571,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define PGETBL_ADDR_MASK 0xFFFFF000 #define PGETBL_ENABLE_MASK 0x00000001 #define PGETBL_ENABLED 0x00000001 -/** Added in 965G, this field has the actual size of the global GTT */ +/* Added in 965G, this field has the actual size of the global GTT */ #define PGETBL_SIZE_MASK 0x0000000e #define PGETBL_SIZE_512KB (0 << 1) #define PGETBL_SIZE_256KB (1 << 1) @@ -592,10 +592,10 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define PTE_MAPPING_TYPE_MASK (3 << 1) #define PTE_VALID (1 << 0) -/** @defgroup PGE_ERR +/* @defgroup PGE_ERR * @{ */ -/** Page table debug register for i845 */ +/* Page table debug register for i845 */ #define PGE_ERR 0x2024 #define PGE_ERR_ADDR_MASK 0xFFFFF000 #define PGE_ERR_ID_MASK 0x00000038 @@ -615,12 +615,12 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define PGE_ERR_ILLEGAL_TRX 0x00000004 #define PGE_ERR_LOCAL_MEM 0x00000005 #define PGE_ERR_TILED 0x00000006 -/** @} */ +/* @} */ -/** @defgroup PGTBL_ER +/* @defgroup PGTBL_ER * @{ */ -/** Page table debug register for i945 */ +/* Page table debug register for i945 */ # define PGTBL_ER 0x2024 # define PGTBL_ERR_MT_TILING (1 << 27) # define PGTBL_ERR_MT_GTT_PTE (1 << 26) @@ -641,7 +641,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define PGTBL_ERR_DISPA_GTT_PTE (1 << 4) # define PGTBL_ERR_HOST_PTE_DATA (1 << 1) # define PGTBL_ERR_HOST_GTT_PTE (1 << 0) -/** @} */ +/* @} */ /* Ring buffer registers, p277, overview p19 */ @@ -880,7 +880,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define PP_STATUS 0x61200 # define PP_ON (1 << 31) -/** +/* * Indicates that all dependencies of the panel are on: * * - PLL enabled @@ -954,12 +954,12 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ # define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ # define DPLL_FPA01_P1_POST_DIV_MASK_IGD 0x00ff8000 /* IGD */ -/** +/* * The i830 generation, in DAC/serial mode, defines p1 as two plus this * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. */ # define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 -/** +/* * The i830 generation, in LVDS mode, defines P1 as the bit number set within * this field (only one bit may be set). */ @@ -991,7 +991,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define DPLL_FPA1_P1_POST_DIV_SHIFT 0 # define DPLL_FPA1_P1_POST_DIV_MASK 0xff -/** +/* * SDVO multiplier for 945G/GM. Not used on 965. * * \sa DPLL_MD_UDI_MULTIPLIER_MASK @@ -1000,24 +1000,24 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define SDVO_MULTIPLIER_SHIFT_HIRES 4 # define SDVO_MULTIPLIER_SHIFT_VGA 0 -/** @defgroup DPLL_MD +/* @defgroup DPLL_MD * @{ */ -/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */ #define DPLL_A_MD 0x0601c -/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */ #define DPLL_B_MD 0x06020 -/** +/* * UDI pixel divider, controlling how many pixels are stuffed into a packet. * * Value is pixels minus 1. Must be set to 1 pixel for SDVO. */ # define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 # define DPLL_MD_UDI_DIVIDER_SHIFT 24 -/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ # define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 # define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 -/** +/* * SDVO/UDI pixel multiplier. * * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus @@ -1036,13 +1036,13 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ # define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 # define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 -/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. +/* SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. * This best be set to the default value (3) or the CRT won't work. No, * I don't entirely understand what this does... */ # define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f # define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 -/** @} */ +/* @} */ #define DPLL_TEST 0x606c # define DPLLB_TEST_SDVO_DIV_1 (0 << 22) @@ -1086,7 +1086,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */ # define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5) # define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4) -/** +/* * This bit must be set on the 830 to prevent hangs when turning off the * overlay scaler. */ @@ -1106,12 +1106,12 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7) # define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6) # define MAG_CLOCK_GATE_DISABLE (1 << 5) -/** This bit must be unset on 855,865 */ +/* This bit must be unset on 855,865 */ # define MECI_CLOCK_GATE_DISABLE (1 << 4) # define DCMP_CLOCK_GATE_DISABLE (1 << 3) # define MEC_CLOCK_GATE_DISABLE (1 << 2) # define MECO_CLOCK_GATE_DISABLE (1 << 1) -/** This bit must be set on 855,865. */ +/* This bit must be set on 855,865. */ # define SV_CLOCK_GATE_DISABLE (1 << 0) # define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16) # define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15) @@ -1132,14 +1132,14 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define I915_BY_CLOCK_GATE_DISABLE (1 << 0) # define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30) -/** This bit must always be set on 965G/965GM */ +/* This bit must always be set on 965G/965GM */ # define I965_RCC_CLOCK_GATE_DISABLE (1 << 29) # define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28) # define I965_DAP_CLOCK_GATE_DISABLE (1 << 27) # define I965_ROC_CLOCK_GATE_DISABLE (1 << 26) # define I965_GW_CLOCK_GATE_DISABLE (1 << 25) # define I965_TD_CLOCK_GATE_DISABLE (1 << 24) -/** This bit must always be set on 965G */ +/* This bit must always be set on 965G */ # define I965_ISC_CLOCK_GATE_DISABLE (1 << 23) # define I965_IC_CLOCK_GATE_DISABLE (1 << 22) # define I965_EU_CLOCK_GATE_DISABLE (1 << 21) @@ -1178,7 +1178,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define BLC_PWM_CTL 0x61254 #define BACKLIGHT_MODULATION_FREQ_SHIFT (17) #define BACKLIGHT_MODULATION_FREQ_SHIFT2 (16) -/** +/* * This is the most significant 15 bits of the number of backlight cycles in a * complete cycle of the modulated backlight control. * @@ -1188,7 +1188,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define BACKLIGHT_MODULATION_FREQ_MASK2 (0xffff << 16) #define BLM_LEGACY_MODE (1 << 16) -/** +/* * This is the number of cycles out of the backlight modulation cycle for which * the backlight is on. * @@ -1274,7 +1274,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define SDVO_PIPE_B_SELECT (1 << 30) #define SDVO_STALL_SELECT (1 << 29) #define SDVO_INTERRUPT_ENABLE (1 << 26) -/** +/* * 915G/GM SDVO pixel multiplier. * * Programmed value is multiplier - 1, up to 5x. @@ -1289,15 +1289,15 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define SDVOC_GANG_MODE (1 << 16) #define SDVO_ENCODING_SDVO (0x0 << 10) #define SDVO_ENCODING_HDMI (0x2 << 10) -/** Requird for HDMI operation */ +/* Requird for HDMI operation */ #define SDVO_NULL_PACKETS_DURING_VSYNC (1 << 9) #define SDVO_BORDER_ENABLE (1 << 7) #define SDVO_AUDIO_ENABLE (1 << 6) -/** New with 965, default is to be set */ +/* New with 965, default is to be set */ #define SDVO_VSYNC_ACTIVE_HIGH (1 << 4) -/** New with 965, default is to be set */ +/* New with 965, default is to be set */ #define SDVO_HSYNC_ACTIVE_HIGH (1 << 3) -/** 915/945 only, read-only bit */ +/* 915/945 only, read-only bit */ #define SDVOB_PCIE_CONCURRENCY (1 << 3) #define SDVO_DETECTED (1 << 2) /* Bits to be preserved when writing */ @@ -1398,22 +1398,22 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define DVO_SRCDIM_HORIZONTAL_SHIFT 12 #define DVO_SRCDIM_VERTICAL_SHIFT 0 -/** @defgroup LVDS +/* @defgroup LVDS * @{ */ -/** +/* * This register controls the LVDS output enable, pipe selection, and data * format selection. * * All of the clock/data pairs are force powered down by power sequencing. */ #define LVDS 0x61180 -/** +/* * Enables the LVDS port. This bit must be set before DPLLs are enabled, as * the DPLL semantics change when the LVDS is assigned to that pipe. */ # define LVDS_PORT_EN (1 << 31) -/** Selects pipe B for LVDS data. Must be set on pre-965. */ +/* Selects pipe B for LVDS data. Must be set on pre-965. */ # define LVDS_PIPEB_SELECT (1 << 30) /* on 965, dithering is enabled in this register, not PFIT_CONTROL */ @@ -1473,14 +1473,14 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ # define LVDS_POWER_DOWN_TRI_STATE (1 << 10) -/** +/* * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per * pixel. */ # define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) # define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) # define LVDS_A0A2_CLKA_POWER_UP (3 << 8) -/** +/* * Controls the A3 data pair, which contains the additional LSBs for 24 bit * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be * on. @@ -1488,7 +1488,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define LVDS_A3_POWER_MASK (3 << 6) # define LVDS_A3_POWER_DOWN (0 << 6) # define LVDS_A3_POWER_UP (3 << 6) -/** +/* * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP * is set. */ @@ -1496,7 +1496,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define LVDS_CLKB_POWER_DOWN (0 << 4) # define LVDS_CLKB_POWER_UP (3 << 4) -/** +/* * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 * setting for whether we are in dual-channel mode. The B3 pair will * additionally only be powered up when LVDS_A3_POWER_UP is set. @@ -1505,7 +1505,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define LVDS_B0B3_POWER_DOWN (0 << 2) # define LVDS_B0B3_POWER_UP (3 << 2) -/** @} */ +/* @} */ #define DP_B 0x64100 #define DPB_AUX_CH_CTL 0x64110 @@ -1561,110 +1561,110 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. /* data lines active (both timing and colour) */ # define LVDS_B_POWER_UP (3 << 2) -/** @defgroup TV_CTL +/* @defgroup TV_CTL * @{ */ #define TV_CTL 0x68000 -/** Enables the TV encoder */ +/* Enables the TV encoder */ # define TV_ENC_ENABLE (1 << 31) -/** Sources the TV encoder input from pipe B instead of A. */ +/* Sources the TV encoder input from pipe B instead of A. */ # define TV_ENC_PIPEB_SELECT (1 << 30) -/** Outputs composite video (DAC A only) */ +/* Outputs composite video (DAC A only) */ # define TV_ENC_OUTPUT_COMPOSITE (0 << 28) -/** Outputs SVideo video (DAC B/C) */ +/* Outputs SVideo video (DAC B/C) */ # define TV_ENC_OUTPUT_SVIDEO (1 << 28) -/** Outputs Component video (DAC A/B/C) */ +/* Outputs Component video (DAC A/B/C) */ # define TV_ENC_OUTPUT_COMPONENT (2 << 28) -/** Outputs Composite and SVideo (DAC A/B/C) */ +/* Outputs Composite and SVideo (DAC A/B/C) */ # define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) # define TV_TRILEVEL_SYNC (1 << 21) -/** Enables slow sync generation (945GM only) */ +/* Enables slow sync generation (945GM only) */ # define TV_SLOW_SYNC (1 << 20) -/** Selects 4x oversampling for 480i and 576p */ +/* Selects 4x oversampling for 480i and 576p */ # define TV_OVERSAMPLE_4X (0 << 18) -/** Selects 2x oversampling for 720p and 1080i */ +/* Selects 2x oversampling for 720p and 1080i */ # define TV_OVERSAMPLE_2X (1 << 18) -/** Selects no oversampling for 1080p */ +/* Selects no oversampling for 1080p */ # define TV_OVERSAMPLE_NONE (2 << 18) -/** Selects 8x oversampling */ +/* Selects 8x oversampling */ # define TV_OVERSAMPLE_8X (3 << 18) -/** Selects progressive mode rather than interlaced */ +/* Selects progressive mode rather than interlaced */ # define TV_PROGRESSIVE (1 << 17) -/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */ +/* Sets the colorburst to PAL mode. Required for non-M PAL modes. */ # define TV_PAL_BURST (1 << 16) -/** Field for setting delay of Y compared to C */ +/* Field for setting delay of Y compared to C */ # define TV_YC_SKEW_MASK (7 << 12) -/** Enables a fix for 480p/576p standard definition modes on the 915GM only */ +/* Enables a fix for 480p/576p standard definition modes on the 915GM only */ # define TV_ENC_SDP_FIX (1 << 11) -/** +/* * Enables a fix for the 915GM only. * * Not sure what it does. */ # define TV_ENC_C0_FIX (1 << 10) -/** Bits that must be preserved by software */ +/* Bits that must be preserved by software */ # define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf) # define TV_FUSE_STATE_MASK (3 << 4) -/** Read-only state that reports all features enabled */ +/* Read-only state that reports all features enabled */ # define TV_FUSE_STATE_ENABLED (0 << 4) -/** Read-only state that reports that Macrovision is disabled in hardware*/ +/* Read-only state that reports that Macrovision is disabled in hardware*/ # define TV_FUSE_STATE_NO_MACROVISION (1 << 4) -/** Read-only state that reports that TV-out is disabled in hardware. */ +/* Read-only state that reports that TV-out is disabled in hardware. */ # define TV_FUSE_STATE_DISABLED (2 << 4) -/** Normal operation */ +/* Normal operation */ # define TV_TEST_MODE_NORMAL (0 << 0) -/** Encoder test pattern 1 - combo pattern */ +/* Encoder test pattern 1 - combo pattern */ # define TV_TEST_MODE_PATTERN_1 (1 << 0) -/** Encoder test pattern 2 - full screen vertical 75% color bars */ +/* Encoder test pattern 2 - full screen vertical 75% color bars */ # define TV_TEST_MODE_PATTERN_2 (2 << 0) -/** Encoder test pattern 3 - full screen horizontal 75% color bars */ +/* Encoder test pattern 3 - full screen horizontal 75% color bars */ # define TV_TEST_MODE_PATTERN_3 (3 << 0) -/** Encoder test pattern 4 - random noise */ +/* Encoder test pattern 4 - random noise */ # define TV_TEST_MODE_PATTERN_4 (4 << 0) -/** Encoder test pattern 5 - linear color ramps */ +/* Encoder test pattern 5 - linear color ramps */ # define TV_TEST_MODE_PATTERN_5 (5 << 0) -/** +/* * This test mode forces the DACs to 50% of full output. * * This is used for load detection in combination with TVDAC_SENSE_MASK */ # define TV_TEST_MODE_MONITOR_DETECT (7 << 0) # define TV_TEST_MODE_MASK (7 << 0) -/** @} */ +/* @} */ -/** @defgroup TV_DAC +/* @defgroup TV_DAC * @{ */ #define TV_DAC 0x68004 -/** +/* * Reports that DAC state change logic has reported change (RO). * * This gets cleared when TV_DAC_STATE_EN is cleared */ # define TVDAC_STATE_CHG (1 << 31) # define TVDAC_SENSE_MASK (7 << 28) -/** Reports that DAC A voltage is above the detect threshold */ +/* Reports that DAC A voltage is above the detect threshold */ # define TVDAC_A_SENSE (1 << 30) -/** Reports that DAC B voltage is above the detect threshold */ +/* Reports that DAC B voltage is above the detect threshold */ # define TVDAC_B_SENSE (1 << 29) -/** Reports that DAC C voltage is above the detect threshold */ +/* Reports that DAC C voltage is above the detect threshold */ # define TVDAC_C_SENSE (1 << 28) -/** +/* * Enables DAC state detection logic, for load-based TV detection. * * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set * to off, for load detection to work. */ # define TVDAC_STATE_CHG_EN (1 << 27) -/** Sets the DAC A sense value to high */ +/* Sets the DAC A sense value to high */ # define TVDAC_A_SENSE_CTL (1 << 26) -/** Sets the DAC B sense value to high */ +/* Sets the DAC B sense value to high */ # define TVDAC_B_SENSE_CTL (1 << 25) -/** Sets the DAC C sense value to high */ +/* Sets the DAC C sense value to high */ # define TVDAC_C_SENSE_CTL (1 << 24) -/** Overrides the ENC_ENABLE and DAC voltage levels */ +/* Overrides the ENC_ENABLE and DAC voltage levels */ # define DAC_CTL_OVERRIDE (1 << 7) -/** Sets the slew rate. Must be preserved in software */ +/* Sets the slew rate. Must be preserved in software */ # define ENC_TVDAC_SLEW_FAST (1 << 6) # define DAC_A_1_3_V (0 << 4) # define DAC_A_1_1_V (1 << 4) @@ -1678,11 +1678,11 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define DAC_C_1_1_V (1 << 0) # define DAC_C_0_7_V (2 << 0) # define DAC_C_OFF (3 << 0) -/** @} */ +/* @} */ -/** +/* * CSC coefficients are stored in a floating point format with 9 bits of - * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, + * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2*-n, * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with * -1 (0x3) being the only legal negative value. */ @@ -1695,7 +1695,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define TV_CSC_Y2 0x68014 # define TV_BY_MASK 0x07ff0000 # define TV_BY_SHIFT 16 -/** +/* * Y attenuation for component video. * * Stored in 1.9 fixed point. @@ -1712,7 +1712,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define TV_CSC_U2 0x6801c # define TV_BU_MASK 0x07ff0000 # define TV_BU_SHIFT 16 -/** +/* * U attenuation for component video. * * Stored in 1.9 fixed point. @@ -1729,7 +1729,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define TV_CSC_V2 0x68024 # define TV_BV_MASK 0x07ff0000 # define TV_BV_SHIFT 16 -/** +/* * V attenuation for component video. * * Stored in 1.9 fixed point. @@ -1737,307 +1737,307 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # define TV_AV_MASK 0x000007ff # define TV_AV_SHIFT 0 -/** @defgroup TV_CSC_KNOBS +/* @defgroup TV_CSC_KNOBS * @{ */ #define TV_CLR_KNOBS 0x68028 -/** 2s-complement brightness adjustment */ +/* 2s-complement brightness adjustment */ # define TV_BRIGHTNESS_MASK 0xff000000 # define TV_BRIGHTNESS_SHIFT 24 -/** Contrast adjustment, as a 2.6 unsigned floating point number */ +/* Contrast adjustment, as a 2.6 unsigned floating point number */ # define TV_CONTRAST_MASK 0x00ff0000 # define TV_CONTRAST_SHIFT 16 -/** Saturation adjustment, as a 2.6 unsigned floating point number */ +/* Saturation adjustment, as a 2.6 unsigned floating point number */ # define TV_SATURATION_MASK 0x0000ff00 # define TV_SATURATION_SHIFT 8 -/** Hue adjustment, as an integer phase angle in degrees */ +/* Hue adjustment, as an integer phase angle in degrees */ # define TV_HUE_MASK 0x000000ff # define TV_HUE_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_CLR_LEVEL +/* @defgroup TV_CLR_LEVEL * @{ */ #define TV_CLR_LEVEL 0x6802c -/** Controls the DAC level for black */ +/* Controls the DAC level for black */ # define TV_BLACK_LEVEL_MASK 0x01ff0000 # define TV_BLACK_LEVEL_SHIFT 16 -/** Controls the DAC level for blanking */ +/* Controls the DAC level for blanking */ # define TV_BLANK_LEVEL_MASK 0x000001ff # define TV_BLANK_LEVEL_SHIFT 0 /* @} */ -/** @defgroup TV_H_CTL_1 +/* @defgroup TV_H_CTL_1 * @{ */ #define TV_H_CTL_1 0x68030 -/** Number of pixels in the hsync. */ +/* Number of pixels in the hsync. */ # define TV_HSYNC_END_MASK 0x1fff0000 # define TV_HSYNC_END_SHIFT 16 -/** Total number of pixels minus one in the line (display and blanking). */ +/* Total number of pixels minus one in the line (display and blanking). */ # define TV_HTOTAL_MASK 0x00001fff # define TV_HTOTAL_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_H_CTL_2 +/* @defgroup TV_H_CTL_2 * @{ */ #define TV_H_CTL_2 0x68034 -/** Enables the colorburst (needed for non-component color) */ +/* Enables the colorburst (needed for non-component color) */ # define TV_BURST_ENA (1 << 31) -/** Offset of the colorburst from the start of hsync, in pixels minus one. */ +/* Offset of the colorburst from the start of hsync, in pixels minus one. */ # define TV_HBURST_START_SHIFT 16 # define TV_HBURST_START_MASK 0x1fff0000 -/** Length of the colorburst */ +/* Length of the colorburst */ # define TV_HBURST_LEN_SHIFT 0 # define TV_HBURST_LEN_MASK 0x0001fff -/** @} */ +/* @} */ -/** @defgroup TV_H_CTL_3 +/* @defgroup TV_H_CTL_3 * @{ */ #define TV_H_CTL_3 0x68038 -/** End of hblank, measured in pixels minus one from start of hsync */ +/* End of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_END_SHIFT 16 # define TV_HBLANK_END_MASK 0x1fff0000 -/** Start of hblank, measured in pixels minus one from start of hsync */ +/* Start of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_START_SHIFT 0 # define TV_HBLANK_START_MASK 0x0001fff -/** @} */ +/* @} */ -/** @defgroup TV_V_CTL_1 +/* @defgroup TV_V_CTL_1 * @{ */ #define TV_V_CTL_1 0x6803c -/** XXX */ +/* XXX */ # define TV_NBR_END_SHIFT 16 # define TV_NBR_END_MASK 0x07ff0000 -/** XXX */ +/* XXX */ # define TV_VI_END_F1_SHIFT 8 # define TV_VI_END_F1_MASK 0x00003f00 -/** XXX */ +/* XXX */ # define TV_VI_END_F2_SHIFT 0 # define TV_VI_END_F2_MASK 0x0000003f -/** @} */ +/* @} */ -/** @defgroup TV_V_CTL_2 +/* @defgroup TV_V_CTL_2 * @{ */ #define TV_V_CTL_2 0x68040 -/** Length of vsync, in half lines */ +/* Length of vsync, in half lines */ # define TV_VSYNC_LEN_MASK 0x07ff0000 # define TV_VSYNC_LEN_SHIFT 16 -/** Offset of the start of vsync in field 1, measured in one less than the +/* Offset of the start of vsync in field 1, measured in one less than the * number of half lines. */ # define TV_VSYNC_START_F1_MASK 0x00007f00 # define TV_VSYNC_START_F1_SHIFT 8 -/** +/* * Offset of the start of vsync in field 2, measured in one less than the * number of half lines. */ # define TV_VSYNC_START_F2_MASK 0x0000007f # define TV_VSYNC_START_F2_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_V_CTL_3 +/* @defgroup TV_V_CTL_3 * @{ */ #define TV_V_CTL_3 0x68044 -/** Enables generation of the equalization signal */ +/* Enables generation of the equalization signal */ # define TV_EQUAL_ENA (1 << 31) -/** Length of vsync, in half lines */ +/* Length of vsync, in half lines */ # define TV_VEQ_LEN_MASK 0x007f0000 # define TV_VEQ_LEN_SHIFT 16 -/** Offset of the start of equalization in field 1, measured in one less than +/* Offset of the start of equalization in field 1, measured in one less than * the number of half lines. */ # define TV_VEQ_START_F1_MASK 0x0007f00 # define TV_VEQ_START_F1_SHIFT 8 -/** +/* * Offset of the start of equalization in field 2, measured in one less than * the number of half lines. */ # define TV_VEQ_START_F2_MASK 0x000007f # define TV_VEQ_START_F2_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_V_CTL_4 +/* @defgroup TV_V_CTL_4 * @{ */ #define TV_V_CTL_4 0x68048 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F1_MASK 0x003f0000 # define TV_VBURST_START_F1_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F1_MASK 0x000000ff # define TV_VBURST_END_F1_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_V_CTL_5 +/* @defgroup TV_V_CTL_5 * @{ */ #define TV_V_CTL_5 0x6804c -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F2_MASK 0x003f0000 # define TV_VBURST_START_F2_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F2_MASK 0x000000ff # define TV_VBURST_END_F2_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_V_CTL_6 +/* @defgroup TV_V_CTL_6 * @{ */ #define TV_V_CTL_6 0x68050 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F3_MASK 0x003f0000 # define TV_VBURST_START_F3_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F3_MASK 0x000000ff # define TV_VBURST_END_F3_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_V_CTL_7 +/* @defgroup TV_V_CTL_7 * @{ */ #define TV_V_CTL_7 0x68054 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F4_MASK 0x003f0000 # define TV_VBURST_START_F4_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ # define TV_VBURST_END_F4_MASK 0x000000ff # define TV_VBURST_END_F4_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_SC_CTL_1 +/* @defgroup TV_SC_CTL_1 * @{ */ #define TV_SC_CTL_1 0x68060 -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA1_EN (1 << 31) -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA2_EN (1 << 30) -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA3_EN (1 << 29) -/** Sets the subcarrier DDA to reset frequency every other field */ +/* Sets the subcarrier DDA to reset frequency every other field */ # define TV_SC_RESET_EVERY_2 (0 << 24) -/** Sets the subcarrier DDA to reset frequency every fourth field */ +/* Sets the subcarrier DDA to reset frequency every fourth field */ # define TV_SC_RESET_EVERY_4 (1 << 24) -/** Sets the subcarrier DDA to reset frequency every eighth field */ +/* Sets the subcarrier DDA to reset frequency every eighth field */ # define TV_SC_RESET_EVERY_8 (2 << 24) -/** Sets the subcarrier DDA to never reset the frequency */ +/* Sets the subcarrier DDA to never reset the frequency */ # define TV_SC_RESET_NEVER (3 << 24) -/** Sets the peak amplitude of the colorburst.*/ +/* Sets the peak amplitude of the colorburst.*/ # define TV_BURST_LEVEL_MASK 0x00ff0000 # define TV_BURST_LEVEL_SHIFT 16 -/** Sets the increment of the first subcarrier phase generation DDA */ +/* Sets the increment of the first subcarrier phase generation DDA */ # define TV_SCDDA1_INC_MASK 0x00000fff # define TV_SCDDA1_INC_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_SC_CTL_2 +/* @defgroup TV_SC_CTL_2 * @{ */ #define TV_SC_CTL_2 0x68064 -/** Sets the rollover for the second subcarrier phase generation DDA */ +/* Sets the rollover for the second subcarrier phase generation DDA */ # define TV_SCDDA2_SIZE_MASK 0x7fff0000 # define TV_SCDDA2_SIZE_SHIFT 16 -/** Sets the increent of the second subcarrier phase generation DDA */ +/* Sets the increent of the second subcarrier phase generation DDA */ # define TV_SCDDA2_INC_MASK 0x00007fff # define TV_SCDDA2_INC_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_SC_CTL_3 +/* @defgroup TV_SC_CTL_3 * @{ */ #define TV_SC_CTL_3 0x68068 -/** Sets the rollover for the third subcarrier phase generation DDA */ +/* Sets the rollover for the third subcarrier phase generation DDA */ # define TV_SCDDA3_SIZE_MASK 0x7fff0000 # define TV_SCDDA3_SIZE_SHIFT 16 -/** Sets the increent of the third subcarrier phase generation DDA */ +/* Sets the increent of the third subcarrier phase generation DDA */ # define TV_SCDDA3_INC_MASK 0x00007fff # define TV_SCDDA3_INC_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_WIN_POS +/* @defgroup TV_WIN_POS * @{ */ #define TV_WIN_POS 0x68070 -/** X coordinate of the display from the start of horizontal active */ +/* X coordinate of the display from the start of horizontal active */ # define TV_XPOS_MASK 0x1fff0000 # define TV_XPOS_SHIFT 16 -/** Y coordinate of the display from the start of vertical active (NBR) */ +/* Y coordinate of the display from the start of vertical active (NBR) */ # define TV_YPOS_MASK 0x00000fff # define TV_YPOS_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_WIN_SIZE +/* @defgroup TV_WIN_SIZE * @{ */ #define TV_WIN_SIZE 0x68074 -/** Horizontal size of the display window, measured in pixels*/ +/* Horizontal size of the display window, measured in pixels*/ # define TV_XSIZE_MASK 0x1fff0000 # define TV_XSIZE_SHIFT 16 -/** +/* * Vertical size of the display window, measured in pixels. * * Must be even for interlaced modes. */ # define TV_YSIZE_MASK 0x00000fff # define TV_YSIZE_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_FILTER_CTL_1 +/* @defgroup TV_FILTER_CTL_1 * @{ */ #define TV_FILTER_CTL_1 0x68080 -/** +/* * Enables automatic scaling calculation. * * If set, the rest of the registers are ignored, and the calculated values can * be read back from the register. */ # define TV_AUTO_SCALE (1 << 31) -/** +/* * Disables the vertical filter. * * This is required on modes more than 1024 pixels wide */ # define TV_V_FILTER_BYPASS (1 << 29) -/** Enables adaptive vertical filtering */ +/* Enables adaptive vertical filtering */ # define TV_VADAPT (1 << 28) # define TV_VADAPT_MODE_MASK (3 << 26) -/** Selects the least adaptive vertical filtering mode */ +/* Selects the least adaptive vertical filtering mode */ # define TV_VADAPT_MODE_LEAST (0 << 26) -/** Selects the moderately adaptive vertical filtering mode */ +/* Selects the moderately adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MODERATE (1 << 26) -/** Selects the most adaptive vertical filtering mode */ +/* Selects the most adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MOST (3 << 26) -/** +/* * Sets the horizontal scaling factor. * * This should be the fractional part of the horizontal scaling factor divided @@ -2047,33 +2047,33 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ # define TV_HSCALE_FRAC_MASK 0x00003fff # define TV_HSCALE_FRAC_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_FILTER_CTL_2 +/* @defgroup TV_FILTER_CTL_2 * @{ */ #define TV_FILTER_CTL_2 0x68084 -/** +/* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) */ # define TV_VSCALE_INT_MASK 0x00038000 # define TV_VSCALE_INT_SHIFT 15 -/** +/* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * \sa TV_VSCALE_INT_MASK */ # define TV_VSCALE_FRAC_MASK 0x00007fff # define TV_VSCALE_FRAC_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_FILTER_CTL_3 +/* @defgroup TV_FILTER_CTL_3 * @{ */ #define TV_FILTER_CTL_3 0x68088 -/** +/* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) @@ -2082,7 +2082,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ # define TV_VSCALE_IP_INT_MASK 0x00038000 # define TV_VSCALE_IP_INT_SHIFT 15 -/** +/* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. @@ -2091,43 +2091,43 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ # define TV_VSCALE_IP_FRAC_MASK 0x00007fff # define TV_VSCALE_IP_FRAC_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_CC_CONTROL +/* @defgroup TV_CC_CONTROL * @{ */ #define TV_CC_CONTROL 0x68090 # define TV_CC_ENABLE (1 << 31) -/** +/* * Specifies which field to send the CC data in. * * CC data is usually sent in field 0. */ # define TV_CC_FID_MASK (1 << 27) # define TV_CC_FID_SHIFT 27 -/** Sets the horizontal position of the CC data. Usually 135. */ +/* Sets the horizontal position of the CC data. Usually 135. */ # define TV_CC_HOFF_MASK 0x03ff0000 # define TV_CC_HOFF_SHIFT 16 -/** Sets the vertical position of the CC data. Usually 21 */ +/* Sets the vertical position of the CC data. Usually 21 */ # define TV_CC_LINE_MASK 0x0000003f # define TV_CC_LINE_SHIFT 0 -/** @} */ +/* @} */ -/** @defgroup TV_CC_DATA +/* @defgroup TV_CC_DATA * @{ */ #define TV_CC_DATA 0x68094 # define TV_CC_RDY (1 << 31) -/** Second word of CC data to be transmitted. */ +/* Second word of CC data to be transmitted. */ # define TV_CC_DATA_2_MASK 0x007f0000 # define TV_CC_DATA_2_SHIFT 16 -/** First word of CC data to be transmitted. */ +/* First word of CC data to be transmitted. */ # define TV_CC_DATA_1_MASK 0x0000007f # define TV_CC_DATA_1_SHIFT 0 -/** @} +/* @} */ -/** @{ */ +/* @{ */ #define TV_H_LUMA_0 0x68100 #define TV_H_LUMA_59 0x681ec #define TV_H_CHROMA_0 0x68200 @@ -2136,7 +2136,7 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. #define TV_V_LUMA_42 0x683a8 #define TV_V_CHROMA_0 0x68400 #define TV_V_CHROMA_42 0x684a8 -/** @} */ +/* @} */ #define PIPEA_DSL 0x70000 diff --git a/lib/rendercopy_gen8.c b/lib/rendercopy_gen8.c index e7567d2..a32871d 100644 --- a/lib/rendercopy_gen8.c +++ b/lib/rendercopy_gen8.c @@ -286,7 +286,7 @@ gen8_fill_ps(struct intel_batchbuffer *batch, return offset; } -/** +/* * gen7_fill_vertex_buffer_data populate vertex buffer with data. * * The vertex buffer consists of 3 vertices to construct a RECTLIST. The 4th @@ -327,7 +327,7 @@ gen7_fill_vertex_buffer_data(struct intel_batchbuffer *batch, return offset; } -/** +/* * gen6_emit_vertex_elements - The vertex elements describe the contents of the * vertex buffer. We pack the vertex buffer in a semi weird way, conforming to * what gen6_rendercopy did. The most straightforward would be to store @@ -384,7 +384,7 @@ gen6_emit_vertex_elements(struct intel_batchbuffer *batch) { GEN6_VFCOMPONENT_STORE_1_FLT << VE1_VFCOMPONENT_3_SHIFT); } -/** +/* * gen7_emit_vertex_buffer emit the vertex buffers command * * @batch -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [i-g-t 3/7] README: update the section on modifying and rebuilding documentation 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood 2014-06-10 14:30 ` [i-g-t 2/7] lib: remove /** from comments that are not API documentation Thomas Wood @ 2014-06-10 14:30 ` Thomas Wood 2014-06-10 14:38 ` Daniel Vetter 2014-06-10 14:30 ` [i-g-t 4/7] docs: add the sections file Thomas Wood ` (4 subsequent siblings) 6 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-10 14:30 UTC (permalink / raw) To: intel-gfx Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- README | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/README b/README index cfa186d..5e98565 100644 --- a/README +++ b/README @@ -108,16 +108,14 @@ docs/ reference documenation in docs/reference/ You need to have the gtk doc tools installed to generate this API documentation. - Note that the currrent gtk-docs integration sucks a bit wrt regenerating - the html files. You need at least + To regenerate the html files when updating documentation, use: $ make clean -C docs && make -C docs - to regenerate them on any change. If you've added/changed/removed a - symbol or anything else that changes the overall structure or indexes, - you need a full rebuild: - - $ git clean -dfx && ./autogen.sh --enable-gtk-doc && make -C docs + If you've added/changed/removed a symbol or anything else that changes + the overall structure or indexes, this needs to be reflected in + intel-gpu-tools-sections.txt. Entirely new sections will also need to be + added to intel-gpu-tools-docs.xml in the appropriate place. DEPENDENCIES This is a non-exchaustive list of package dependencies required for -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [i-g-t 3/7] README: update the section on modifying and rebuilding documentation 2014-06-10 14:30 ` [i-g-t 3/7] README: update the section on modifying and rebuilding documentation Thomas Wood @ 2014-06-10 14:38 ` Daniel Vetter 2014-06-11 10:33 ` Thomas Wood 0 siblings, 1 reply; 21+ messages in thread From: Daniel Vetter @ 2014-06-10 14:38 UTC (permalink / raw) To: Thomas Wood; +Cc: intel-gfx On Tue, Jun 10, 2014 at 03:30:53PM +0100, Thomas Wood wrote: > Signed-off-by: Thomas Wood <thomas.wood@intel.com> > --- > README | 12 +++++------- > 1 file changed, 5 insertions(+), 7 deletions(-) > > diff --git a/README b/README > index cfa186d..5e98565 100644 > --- a/README > +++ b/README > @@ -108,16 +108,14 @@ docs/ > reference documenation in docs/reference/ You need to have the gtk doc > tools installed to generate this API documentation. > > - Note that the currrent gtk-docs integration sucks a bit wrt regenerating > - the html files. You need at least > + To regenerate the html files when updating documentation, use: > > $ make clean -C docs && make -C docs > > - to regenerate them on any change. If you've added/changed/removed a > - symbol or anything else that changes the overall structure or indexes, > - you need a full rebuild: > - > - $ git clean -dfx && ./autogen.sh --enable-gtk-doc && make -C docs This is still requried afaik when you add new .c/.h files with api docs in them. -Daniel > + If you've added/changed/removed a symbol or anything else that changes > + the overall structure or indexes, this needs to be reflected in > + intel-gpu-tools-sections.txt. Entirely new sections will also need to be > + added to intel-gpu-tools-docs.xml in the appropriate place. > > DEPENDENCIES > This is a non-exchaustive list of package dependencies required for > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [i-g-t 3/7] README: update the section on modifying and rebuilding documentation 2014-06-10 14:38 ` Daniel Vetter @ 2014-06-11 10:33 ` Thomas Wood 0 siblings, 0 replies; 21+ messages in thread From: Thomas Wood @ 2014-06-11 10:33 UTC (permalink / raw) To: Daniel Vetter; +Cc: Intel Graphics Development On 10 June 2014 15:38, Daniel Vetter <daniel@ffwll.ch> wrote: > On Tue, Jun 10, 2014 at 03:30:53PM +0100, Thomas Wood wrote: >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> >> --- >> README | 12 +++++------- >> 1 file changed, 5 insertions(+), 7 deletions(-) >> >> diff --git a/README b/README >> index cfa186d..5e98565 100644 >> --- a/README >> +++ b/README >> @@ -108,16 +108,14 @@ docs/ >> reference documenation in docs/reference/ You need to have the gtk doc >> tools installed to generate this API documentation. >> >> - Note that the currrent gtk-docs integration sucks a bit wrt regenerating >> - the html files. You need at least >> + To regenerate the html files when updating documentation, use: >> >> $ make clean -C docs && make -C docs >> >> - to regenerate them on any change. If you've added/changed/removed a >> - symbol or anything else that changes the overall structure or indexes, >> - you need a full rebuild: >> - >> - $ git clean -dfx && ./autogen.sh --enable-gtk-doc && make -C docs > > This is still requried afaik when you add new .c/.h files with api docs in > them. > -Daniel Running make clean && make is enough for symbols to be added or removed, even in new source files. The sections file will still need to be updated to reflect the changes (e.g. new sections added when new files are added). > >> + If you've added/changed/removed a symbol or anything else that changes >> + the overall structure or indexes, this needs to be reflected in >> + intel-gpu-tools-sections.txt. Entirely new sections will also need to be >> + added to intel-gpu-tools-docs.xml in the appropriate place. >> >> DEPENDENCIES >> This is a non-exchaustive list of package dependencies required for >> -- >> 1.9.3 >> >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* [i-g-t 4/7] docs: add the sections file 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood 2014-06-10 14:30 ` [i-g-t 2/7] lib: remove /** from comments that are not API documentation Thomas Wood 2014-06-10 14:30 ` [i-g-t 3/7] README: update the section on modifying and rebuilding documentation Thomas Wood @ 2014-06-10 14:30 ` Thomas Wood 2014-06-10 14:40 ` Daniel Vetter 2014-06-10 14:30 ` [i-g-t 5/7] gitignore: add missing files and keep lists sorted Thomas Wood ` (3 subsequent siblings) 6 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-10 14:30 UTC (permalink / raw) To: intel-gfx This file can contain custom changes to the control the documentation output and therefore should be included in the repository. Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- docs/reference/intel-gpu-tools/.gitignore | 1 - .../intel-gpu-tools/intel-gpu-tools-sections.txt | 378 +++++++++++++++++++++ 2 files changed, 378 insertions(+), 1 deletion(-) create mode 100644 docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt diff --git a/docs/reference/intel-gpu-tools/.gitignore b/docs/reference/intel-gpu-tools/.gitignore index 9415974..9fadbfc 100644 --- a/docs/reference/intel-gpu-tools/.gitignore +++ b/docs/reference/intel-gpu-tools/.gitignore @@ -6,7 +6,6 @@ /intel-gpu-tools-decl-list.txt /intel-gpu-tools-decl.txt /intel-gpu-tools-overrides.txt -/intel-gpu-tools-sections.txt /intel-gpu-tools-undeclared.txt /intel-gpu-tools-undocumented.txt /intel-gpu-tools-unused.txt diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt new file mode 100644 index 0000000..de6c76c --- /dev/null +++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt @@ -0,0 +1,378 @@ +<SECTION> +<FILE>debug</FILE> +DEBUG_PROTOCOL_VERSION +COMMUNICATION_OFFSET +COMMUNICATION_QWORD +STATE_EU_MSG +STATE_CPU_ACK +STATE_OFFSET +STATE_QWORD +TX_OFFSET +TX_QWORD +RX_OFFSET +RX_QWORD +grf +mrf +cr +sr +DWORD8 +</SECTION> + +<SECTION> +<FILE>drmtest</FILE> +mmap64 +ARRAY_SIZE +ALIGN +drm_get_card +drm_open_any +drm_open_any_render +gem_quiescent_gpu +do_or_die +do_ioctl +</SECTION> + +<SECTION> +<FILE>igt_aux</FILE> +igt_fork_signal_helper +igt_stop_signal_helper +igt_exchange_int +igt_permute_array +igt_progress +igt_check_boolean_env_var +igt_aub_dump_enabled +igt_init_aperture_trashers +igt_trash_aperture +igt_cleanup_aperture_trashers +igt_system_suspend_autoresume +igt_drop_root +igt_wait_for_keypress +igt_runtime_pm_status +igt_setup_runtime_pm +igt_get_runtime_pm_status +igt_wait_for_pm_status +intel_purge_vm_caches +intel_get_avail_ram_mb +intel_get_total_ram_mb +intel_get_total_swap_mb +intel_check_memory +CHECK_RAM +CHECK_SWAP +</SECTION> + +<SECTION> +<FILE>igt_core</FILE> +IGT_EXIT_TIMEOUT +IGT_EXIT_SKIP +IGT_EXIT_SUCCESS +igt_fixture +igt_subtest_init +igt_opt_handler_t +igt_subtest_init_parse_opts +igt_tokencat +igt_subtest +igt_subtest_f +igt_subtest_name +igt_only_list_subtests +igt_main +igt_simple_init +igt_simple_main +igt_skip +igt_success +igt_fail +igt_exit +igt_assert +igt_assert_f +igt_assert_cmpint +igt_require +igt_skip_on +igt_require_f +igt_skip_on_f +igt_fork +igt_waitchildren +igt_helper_process +igt_fork_helper +igt_wait_helper +igt_stop_helper +igt_exit_handler_t +igt_install_exit_handler +igt_enable_exit_handler +igt_disable_exit_handler +igt_run_in_simulation +SLOW_QUICK +igt_skip_on_simulation +igt_log_level +igt_log +igt_vlog +igt_debug +igt_info +igt_warn +igt_warn_on +igt_warn_on_f +igt_set_timeout +</SECTION> + +<SECTION> +<FILE>igt_debugfs</FILE> +igt_debugfs_open +igt_debugfs_fopen +igt_pipe_crc_t +igt_crc_t +intel_pipe_crc_source +igt_crc_is_null +igt_crc_equal +igt_crc_to_string +igt_require_pipe_crc +igt_pipe_crc_new +igt_pipe_crc_free +igt_pipe_crc_start +igt_pipe_crc_stop +igt_pipe_crc_get_crcs +igt_pipe_crc_collect_crc +DROP_UNBOUND +DROP_BOUND +DROP_RETIRE +DROP_ACTIVE +DROP_ALL +igt_drop_caches_set +igt_disable_prefault +igt_enable_prefault +igt_open_forcewake_handle +stop_ring_flags +igt_to_stop_ring_flag +igt_set_stop_rings +igt_get_stop_rings +</SECTION> + +<SECTION> +<FILE>igt_fb</FILE> +cairo_surface_t +cairo_t +igt_fb +igt_text_align +igt_create_fb_with_bo_size +igt_create_fb +igt_create_color_fb +igt_remove_fb +igt_get_cairo_ctx +igt_paint_color +igt_paint_color_alpha +igt_paint_color_gradient +igt_paint_test_pattern +igt_paint_image +igt_write_fb_to_png +igt_cairo_printf_line +igt_bpp_depth_to_drm_format +igt_drm_format_to_bpp +igt_format_str +igt_get_all_formats +</SECTION> + +<SECTION> +<FILE>igt_kms</FILE> +pipe +pipe_name +igt_plane +plane_name +sprite_name +port +port_name +kmstest_connector_config +kmstest_get_connector_default_mode +kmstest_get_connector_config +kmstest_free_connector_config +kmstest_dump_mode +kmstest_get_pipe_from_crtc_id +kmstest_pipe_str +kmstest_encoder_type_str +kmstest_connector_status_str +kmstest_connector_type_str +kmstest_set_connector_dpms +igt_display_t +igt_pipe_t +igt_fixed_t +igt_plane_t +igt_pipe +igt_output_t +igt_display +igt_set_vt_graphics_mode +igt_display_init +igt_display_fini +igt_display_commit +igt_display_get_n_pipes +igt_output_name +igt_output_get_mode +igt_output_set_pipe +igt_output_get_plane +igt_plane_set_fb +igt_plane_set_position +igt_wait_for_vblank +for_each_connected_output +PIPE_ANY +IGT_FIXED +</SECTION> + +<SECTION> +<FILE>instdone</FILE> +MAX_INSTDONE_BITS +instdone_bit +num_instdone_bits +init_instdone_definitions +</SECTION> + +<SECTION> +<FILE>intel_batchbuffer</FILE> +BATCH_SZ +BATCH_RESERVED +intel_batchbuffer +intel_batchbuffer_alloc +intel_batchbuffer_free +intel_batchbuffer_flush +intel_batchbuffer_flush_on_ring +intel_batchbuffer_flush_with_context +intel_batchbuffer_reset +intel_batchbuffer_data +intel_batchbuffer_emit_reloc +intel_batchbuffer_space +intel_batchbuffer_emit_dword +intel_batchbuffer_require_space +BEGIN_BATCH +OUT_BATCH +OUT_RELOC_FENCED +OUT_RELOC +ADVANCE_BATCH +BLIT_COPY_BATCH_START +COLOR_BLIT_COPY_BATCH_START +BLIT_RELOC_UDW +intel_blt_copy +intel_copy_bo +igt_buf +igt_buf_width +igt_buf_height +igt_render_copyfunc_t +igt_get_render_copyfunc +igt_media_fillfunc_t +igt_get_media_fillfunc +</SECTION> + +<SECTION> +<FILE>intel_chipset</FILE> +intel_get_pci_device +intel_get_drm_devid +intel_gen +pch_type +intel_check_pch +HAS_IBX +HAS_CPT +HAS_LPT +IS_MOBILE +IS_G45 +IS_GM45 +IS_G4X +IS_ILD +IS_ILM +IS_915 +IS_945GM +IS_945 +IS_G33 +IS_GEN2 +IS_GEN3 +IS_GEN4 +IS_GEN5 +IS_GEN6 +IS_GEN7 +IS_IVYBRIDGE +IS_VALLEYVIEW +IS_HSW_GT1 +IS_HSW_GT2 +IS_HSW_GT3 +IS_HASWELL +IS_BROADWELL +IS_CHERRYVIEW +IS_GEN8 +IS_965 +IS_9XX +IS_INTEL +HAS_PCH_SPLIT +HAS_BLT_RING +HAS_BSD_RING +IS_BROADWATER +IS_CRESTLINE +HAS_VEBOX_RING +</SECTION> + +<SECTION> +<FILE>intel_io</FILE> +mmio +intel_mmio_use_pci_bar +intel_mmio_use_dump_file +intel_register_access_init +intel_register_access_fini +intel_register_read +intel_register_write +intel_register_access_needs_fakewake +INREG +OUTREG +intel_dpio_reg_read +intel_dpio_reg_write +intel_flisdsi_reg_read +intel_flisdsi_reg_write +intel_punit_read +intel_punit_write +intel_nc_read +intel_nc_write +</SECTION> + +<SECTION> +<FILE>ioctl_wrappers</FILE> +gem_handle_to_libdrm_bo +gem_set_tiling +gem_set_caching +gem_get_caching +gem_flink +gem_open +gem_close +gem_write +gem_read +gem_set_domain +gem_sync +gem_create +gem_execbuf +gem_mmap__gtt +gem_mmap__cpu +gem_mmap +gem_madvise +gem_context_create +gem_sw_finish +gem_bo_busy +gem_get_num_rings +gem_has_enable_ring +gem_has_bsd +gem_has_blt +gem_has_vebox +gem_uses_aliasing_ppgtt +gem_available_fences +gem_available_aperture_size +gem_aperture_size +gem_mappable_aperture_size +gem_require_caching +gem_require_ring +prime_handle_to_fd +prime_fd_to_handle +prime_get_size +</SECTION> + +<SECTION> +<FILE>media_fill</FILE> +gen8_media_fillfunc +gen7_media_fillfunc +</SECTION> + +<SECTION> +<FILE>rendercopy</FILE> +gen8_render_copyfunc +gen7_render_copyfunc +gen6_render_copyfunc +gen3_render_copyfunc +gen2_render_copyfunc +</SECTION> + -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [i-g-t 4/7] docs: add the sections file 2014-06-10 14:30 ` [i-g-t 4/7] docs: add the sections file Thomas Wood @ 2014-06-10 14:40 ` Daniel Vetter 2014-06-11 10:35 ` Thomas Wood 0 siblings, 1 reply; 21+ messages in thread From: Daniel Vetter @ 2014-06-10 14:40 UTC (permalink / raw) To: Thomas Wood; +Cc: intel-gfx On Tue, Jun 10, 2014 at 03:30:54PM +0100, Thomas Wood wrote: > This file can contain custom changes to the control the documentation > output and therefore should be included in the repository. > > Signed-off-by: Thomas Wood <thomas.wood@intel.com> Doesn't that mean we need to update this when adding new symbols? Imo forcing autogeneration is better since you can control the order also by moving functions around in the .h files. Or what exactly is this for? -Daniel > --- > docs/reference/intel-gpu-tools/.gitignore | 1 - > .../intel-gpu-tools/intel-gpu-tools-sections.txt | 378 +++++++++++++++++++++ > 2 files changed, 378 insertions(+), 1 deletion(-) > create mode 100644 docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt > > diff --git a/docs/reference/intel-gpu-tools/.gitignore b/docs/reference/intel-gpu-tools/.gitignore > index 9415974..9fadbfc 100644 > --- a/docs/reference/intel-gpu-tools/.gitignore > +++ b/docs/reference/intel-gpu-tools/.gitignore > @@ -6,7 +6,6 @@ > /intel-gpu-tools-decl-list.txt > /intel-gpu-tools-decl.txt > /intel-gpu-tools-overrides.txt > -/intel-gpu-tools-sections.txt > /intel-gpu-tools-undeclared.txt > /intel-gpu-tools-undocumented.txt > /intel-gpu-tools-unused.txt > diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt > new file mode 100644 > index 0000000..de6c76c > --- /dev/null > +++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt > @@ -0,0 +1,378 @@ > +<SECTION> > +<FILE>debug</FILE> > +DEBUG_PROTOCOL_VERSION > +COMMUNICATION_OFFSET > +COMMUNICATION_QWORD > +STATE_EU_MSG > +STATE_CPU_ACK > +STATE_OFFSET > +STATE_QWORD > +TX_OFFSET > +TX_QWORD > +RX_OFFSET > +RX_QWORD > +grf > +mrf > +cr > +sr > +DWORD8 > +</SECTION> > + > +<SECTION> > +<FILE>drmtest</FILE> > +mmap64 > +ARRAY_SIZE > +ALIGN > +drm_get_card > +drm_open_any > +drm_open_any_render > +gem_quiescent_gpu > +do_or_die > +do_ioctl > +</SECTION> > + > +<SECTION> > +<FILE>igt_aux</FILE> > +igt_fork_signal_helper > +igt_stop_signal_helper > +igt_exchange_int > +igt_permute_array > +igt_progress > +igt_check_boolean_env_var > +igt_aub_dump_enabled > +igt_init_aperture_trashers > +igt_trash_aperture > +igt_cleanup_aperture_trashers > +igt_system_suspend_autoresume > +igt_drop_root > +igt_wait_for_keypress > +igt_runtime_pm_status > +igt_setup_runtime_pm > +igt_get_runtime_pm_status > +igt_wait_for_pm_status > +intel_purge_vm_caches > +intel_get_avail_ram_mb > +intel_get_total_ram_mb > +intel_get_total_swap_mb > +intel_check_memory > +CHECK_RAM > +CHECK_SWAP > +</SECTION> > + > +<SECTION> > +<FILE>igt_core</FILE> > +IGT_EXIT_TIMEOUT > +IGT_EXIT_SKIP > +IGT_EXIT_SUCCESS > +igt_fixture > +igt_subtest_init > +igt_opt_handler_t > +igt_subtest_init_parse_opts > +igt_tokencat > +igt_subtest > +igt_subtest_f > +igt_subtest_name > +igt_only_list_subtests > +igt_main > +igt_simple_init > +igt_simple_main > +igt_skip > +igt_success > +igt_fail > +igt_exit > +igt_assert > +igt_assert_f > +igt_assert_cmpint > +igt_require > +igt_skip_on > +igt_require_f > +igt_skip_on_f > +igt_fork > +igt_waitchildren > +igt_helper_process > +igt_fork_helper > +igt_wait_helper > +igt_stop_helper > +igt_exit_handler_t > +igt_install_exit_handler > +igt_enable_exit_handler > +igt_disable_exit_handler > +igt_run_in_simulation > +SLOW_QUICK > +igt_skip_on_simulation > +igt_log_level > +igt_log > +igt_vlog > +igt_debug > +igt_info > +igt_warn > +igt_warn_on > +igt_warn_on_f > +igt_set_timeout > +</SECTION> > + > +<SECTION> > +<FILE>igt_debugfs</FILE> > +igt_debugfs_open > +igt_debugfs_fopen > +igt_pipe_crc_t > +igt_crc_t > +intel_pipe_crc_source > +igt_crc_is_null > +igt_crc_equal > +igt_crc_to_string > +igt_require_pipe_crc > +igt_pipe_crc_new > +igt_pipe_crc_free > +igt_pipe_crc_start > +igt_pipe_crc_stop > +igt_pipe_crc_get_crcs > +igt_pipe_crc_collect_crc > +DROP_UNBOUND > +DROP_BOUND > +DROP_RETIRE > +DROP_ACTIVE > +DROP_ALL > +igt_drop_caches_set > +igt_disable_prefault > +igt_enable_prefault > +igt_open_forcewake_handle > +stop_ring_flags > +igt_to_stop_ring_flag > +igt_set_stop_rings > +igt_get_stop_rings > +</SECTION> > + > +<SECTION> > +<FILE>igt_fb</FILE> > +cairo_surface_t > +cairo_t > +igt_fb > +igt_text_align > +igt_create_fb_with_bo_size > +igt_create_fb > +igt_create_color_fb > +igt_remove_fb > +igt_get_cairo_ctx > +igt_paint_color > +igt_paint_color_alpha > +igt_paint_color_gradient > +igt_paint_test_pattern > +igt_paint_image > +igt_write_fb_to_png > +igt_cairo_printf_line > +igt_bpp_depth_to_drm_format > +igt_drm_format_to_bpp > +igt_format_str > +igt_get_all_formats > +</SECTION> > + > +<SECTION> > +<FILE>igt_kms</FILE> > +pipe > +pipe_name > +igt_plane > +plane_name > +sprite_name > +port > +port_name > +kmstest_connector_config > +kmstest_get_connector_default_mode > +kmstest_get_connector_config > +kmstest_free_connector_config > +kmstest_dump_mode > +kmstest_get_pipe_from_crtc_id > +kmstest_pipe_str > +kmstest_encoder_type_str > +kmstest_connector_status_str > +kmstest_connector_type_str > +kmstest_set_connector_dpms > +igt_display_t > +igt_pipe_t > +igt_fixed_t > +igt_plane_t > +igt_pipe > +igt_output_t > +igt_display > +igt_set_vt_graphics_mode > +igt_display_init > +igt_display_fini > +igt_display_commit > +igt_display_get_n_pipes > +igt_output_name > +igt_output_get_mode > +igt_output_set_pipe > +igt_output_get_plane > +igt_plane_set_fb > +igt_plane_set_position > +igt_wait_for_vblank > +for_each_connected_output > +PIPE_ANY > +IGT_FIXED > +</SECTION> > + > +<SECTION> > +<FILE>instdone</FILE> > +MAX_INSTDONE_BITS > +instdone_bit > +num_instdone_bits > +init_instdone_definitions > +</SECTION> > + > +<SECTION> > +<FILE>intel_batchbuffer</FILE> > +BATCH_SZ > +BATCH_RESERVED > +intel_batchbuffer > +intel_batchbuffer_alloc > +intel_batchbuffer_free > +intel_batchbuffer_flush > +intel_batchbuffer_flush_on_ring > +intel_batchbuffer_flush_with_context > +intel_batchbuffer_reset > +intel_batchbuffer_data > +intel_batchbuffer_emit_reloc > +intel_batchbuffer_space > +intel_batchbuffer_emit_dword > +intel_batchbuffer_require_space > +BEGIN_BATCH > +OUT_BATCH > +OUT_RELOC_FENCED > +OUT_RELOC > +ADVANCE_BATCH > +BLIT_COPY_BATCH_START > +COLOR_BLIT_COPY_BATCH_START > +BLIT_RELOC_UDW > +intel_blt_copy > +intel_copy_bo > +igt_buf > +igt_buf_width > +igt_buf_height > +igt_render_copyfunc_t > +igt_get_render_copyfunc > +igt_media_fillfunc_t > +igt_get_media_fillfunc > +</SECTION> > + > +<SECTION> > +<FILE>intel_chipset</FILE> > +intel_get_pci_device > +intel_get_drm_devid > +intel_gen > +pch_type > +intel_check_pch > +HAS_IBX > +HAS_CPT > +HAS_LPT > +IS_MOBILE > +IS_G45 > +IS_GM45 > +IS_G4X > +IS_ILD > +IS_ILM > +IS_915 > +IS_945GM > +IS_945 > +IS_G33 > +IS_GEN2 > +IS_GEN3 > +IS_GEN4 > +IS_GEN5 > +IS_GEN6 > +IS_GEN7 > +IS_IVYBRIDGE > +IS_VALLEYVIEW > +IS_HSW_GT1 > +IS_HSW_GT2 > +IS_HSW_GT3 > +IS_HASWELL > +IS_BROADWELL > +IS_CHERRYVIEW > +IS_GEN8 > +IS_965 > +IS_9XX > +IS_INTEL > +HAS_PCH_SPLIT > +HAS_BLT_RING > +HAS_BSD_RING > +IS_BROADWATER > +IS_CRESTLINE > +HAS_VEBOX_RING > +</SECTION> > + > +<SECTION> > +<FILE>intel_io</FILE> > +mmio > +intel_mmio_use_pci_bar > +intel_mmio_use_dump_file > +intel_register_access_init > +intel_register_access_fini > +intel_register_read > +intel_register_write > +intel_register_access_needs_fakewake > +INREG > +OUTREG > +intel_dpio_reg_read > +intel_dpio_reg_write > +intel_flisdsi_reg_read > +intel_flisdsi_reg_write > +intel_punit_read > +intel_punit_write > +intel_nc_read > +intel_nc_write > +</SECTION> > + > +<SECTION> > +<FILE>ioctl_wrappers</FILE> > +gem_handle_to_libdrm_bo > +gem_set_tiling > +gem_set_caching > +gem_get_caching > +gem_flink > +gem_open > +gem_close > +gem_write > +gem_read > +gem_set_domain > +gem_sync > +gem_create > +gem_execbuf > +gem_mmap__gtt > +gem_mmap__cpu > +gem_mmap > +gem_madvise > +gem_context_create > +gem_sw_finish > +gem_bo_busy > +gem_get_num_rings > +gem_has_enable_ring > +gem_has_bsd > +gem_has_blt > +gem_has_vebox > +gem_uses_aliasing_ppgtt > +gem_available_fences > +gem_available_aperture_size > +gem_aperture_size > +gem_mappable_aperture_size > +gem_require_caching > +gem_require_ring > +prime_handle_to_fd > +prime_fd_to_handle > +prime_get_size > +</SECTION> > + > +<SECTION> > +<FILE>media_fill</FILE> > +gen8_media_fillfunc > +gen7_media_fillfunc > +</SECTION> > + > +<SECTION> > +<FILE>rendercopy</FILE> > +gen8_render_copyfunc > +gen7_render_copyfunc > +gen6_render_copyfunc > +gen3_render_copyfunc > +gen2_render_copyfunc > +</SECTION> > + > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [i-g-t 4/7] docs: add the sections file 2014-06-10 14:40 ` Daniel Vetter @ 2014-06-11 10:35 ` Thomas Wood 2014-06-11 11:56 ` Daniel Vetter 0 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-11 10:35 UTC (permalink / raw) To: Daniel Vetter; +Cc: Intel Graphics Development On 10 June 2014 15:40, Daniel Vetter <daniel@ffwll.ch> wrote: > On Tue, Jun 10, 2014 at 03:30:54PM +0100, Thomas Wood wrote: >> This file can contain custom changes to the control the documentation >> output and therefore should be included in the repository. >> >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> > > Doesn't that mean we need to update this when adding new symbols? Imo > forcing autogeneration is better since you can control the order also by > moving functions around in the .h files. Or what exactly is this for? > -Daniel There are further annotations that can be made in this file, which is why gtk-doc does not automatically overwrite it when symbols and sections are added or removed: https://developer.gnome.org/gtk-doc-manual/stable/metafiles_sections.html.en > >> --- >> docs/reference/intel-gpu-tools/.gitignore | 1 - >> .../intel-gpu-tools/intel-gpu-tools-sections.txt | 378 +++++++++++++++++++++ >> 2 files changed, 378 insertions(+), 1 deletion(-) >> create mode 100644 docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt >> >> diff --git a/docs/reference/intel-gpu-tools/.gitignore b/docs/reference/intel-gpu-tools/.gitignore >> index 9415974..9fadbfc 100644 >> --- a/docs/reference/intel-gpu-tools/.gitignore >> +++ b/docs/reference/intel-gpu-tools/.gitignore >> @@ -6,7 +6,6 @@ >> /intel-gpu-tools-decl-list.txt >> /intel-gpu-tools-decl.txt >> /intel-gpu-tools-overrides.txt >> -/intel-gpu-tools-sections.txt >> /intel-gpu-tools-undeclared.txt >> /intel-gpu-tools-undocumented.txt >> /intel-gpu-tools-unused.txt >> diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt >> new file mode 100644 >> index 0000000..de6c76c >> --- /dev/null >> +++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt >> @@ -0,0 +1,378 @@ >> +<SECTION> >> +<FILE>debug</FILE> >> +DEBUG_PROTOCOL_VERSION >> +COMMUNICATION_OFFSET >> +COMMUNICATION_QWORD >> +STATE_EU_MSG >> +STATE_CPU_ACK >> +STATE_OFFSET >> +STATE_QWORD >> +TX_OFFSET >> +TX_QWORD >> +RX_OFFSET >> +RX_QWORD >> +grf >> +mrf >> +cr >> +sr >> +DWORD8 >> +</SECTION> >> + >> +<SECTION> >> +<FILE>drmtest</FILE> >> +mmap64 >> +ARRAY_SIZE >> +ALIGN >> +drm_get_card >> +drm_open_any >> +drm_open_any_render >> +gem_quiescent_gpu >> +do_or_die >> +do_ioctl >> +</SECTION> >> + >> +<SECTION> >> +<FILE>igt_aux</FILE> >> +igt_fork_signal_helper >> +igt_stop_signal_helper >> +igt_exchange_int >> +igt_permute_array >> +igt_progress >> +igt_check_boolean_env_var >> +igt_aub_dump_enabled >> +igt_init_aperture_trashers >> +igt_trash_aperture >> +igt_cleanup_aperture_trashers >> +igt_system_suspend_autoresume >> +igt_drop_root >> +igt_wait_for_keypress >> +igt_runtime_pm_status >> +igt_setup_runtime_pm >> +igt_get_runtime_pm_status >> +igt_wait_for_pm_status >> +intel_purge_vm_caches >> +intel_get_avail_ram_mb >> +intel_get_total_ram_mb >> +intel_get_total_swap_mb >> +intel_check_memory >> +CHECK_RAM >> +CHECK_SWAP >> +</SECTION> >> + >> +<SECTION> >> +<FILE>igt_core</FILE> >> +IGT_EXIT_TIMEOUT >> +IGT_EXIT_SKIP >> +IGT_EXIT_SUCCESS >> +igt_fixture >> +igt_subtest_init >> +igt_opt_handler_t >> +igt_subtest_init_parse_opts >> +igt_tokencat >> +igt_subtest >> +igt_subtest_f >> +igt_subtest_name >> +igt_only_list_subtests >> +igt_main >> +igt_simple_init >> +igt_simple_main >> +igt_skip >> +igt_success >> +igt_fail >> +igt_exit >> +igt_assert >> +igt_assert_f >> +igt_assert_cmpint >> +igt_require >> +igt_skip_on >> +igt_require_f >> +igt_skip_on_f >> +igt_fork >> +igt_waitchildren >> +igt_helper_process >> +igt_fork_helper >> +igt_wait_helper >> +igt_stop_helper >> +igt_exit_handler_t >> +igt_install_exit_handler >> +igt_enable_exit_handler >> +igt_disable_exit_handler >> +igt_run_in_simulation >> +SLOW_QUICK >> +igt_skip_on_simulation >> +igt_log_level >> +igt_log >> +igt_vlog >> +igt_debug >> +igt_info >> +igt_warn >> +igt_warn_on >> +igt_warn_on_f >> +igt_set_timeout >> +</SECTION> >> + >> +<SECTION> >> +<FILE>igt_debugfs</FILE> >> +igt_debugfs_open >> +igt_debugfs_fopen >> +igt_pipe_crc_t >> +igt_crc_t >> +intel_pipe_crc_source >> +igt_crc_is_null >> +igt_crc_equal >> +igt_crc_to_string >> +igt_require_pipe_crc >> +igt_pipe_crc_new >> +igt_pipe_crc_free >> +igt_pipe_crc_start >> +igt_pipe_crc_stop >> +igt_pipe_crc_get_crcs >> +igt_pipe_crc_collect_crc >> +DROP_UNBOUND >> +DROP_BOUND >> +DROP_RETIRE >> +DROP_ACTIVE >> +DROP_ALL >> +igt_drop_caches_set >> +igt_disable_prefault >> +igt_enable_prefault >> +igt_open_forcewake_handle >> +stop_ring_flags >> +igt_to_stop_ring_flag >> +igt_set_stop_rings >> +igt_get_stop_rings >> +</SECTION> >> + >> +<SECTION> >> +<FILE>igt_fb</FILE> >> +cairo_surface_t >> +cairo_t >> +igt_fb >> +igt_text_align >> +igt_create_fb_with_bo_size >> +igt_create_fb >> +igt_create_color_fb >> +igt_remove_fb >> +igt_get_cairo_ctx >> +igt_paint_color >> +igt_paint_color_alpha >> +igt_paint_color_gradient >> +igt_paint_test_pattern >> +igt_paint_image >> +igt_write_fb_to_png >> +igt_cairo_printf_line >> +igt_bpp_depth_to_drm_format >> +igt_drm_format_to_bpp >> +igt_format_str >> +igt_get_all_formats >> +</SECTION> >> + >> +<SECTION> >> +<FILE>igt_kms</FILE> >> +pipe >> +pipe_name >> +igt_plane >> +plane_name >> +sprite_name >> +port >> +port_name >> +kmstest_connector_config >> +kmstest_get_connector_default_mode >> +kmstest_get_connector_config >> +kmstest_free_connector_config >> +kmstest_dump_mode >> +kmstest_get_pipe_from_crtc_id >> +kmstest_pipe_str >> +kmstest_encoder_type_str >> +kmstest_connector_status_str >> +kmstest_connector_type_str >> +kmstest_set_connector_dpms >> +igt_display_t >> +igt_pipe_t >> +igt_fixed_t >> +igt_plane_t >> +igt_pipe >> +igt_output_t >> +igt_display >> +igt_set_vt_graphics_mode >> +igt_display_init >> +igt_display_fini >> +igt_display_commit >> +igt_display_get_n_pipes >> +igt_output_name >> +igt_output_get_mode >> +igt_output_set_pipe >> +igt_output_get_plane >> +igt_plane_set_fb >> +igt_plane_set_position >> +igt_wait_for_vblank >> +for_each_connected_output >> +PIPE_ANY >> +IGT_FIXED >> +</SECTION> >> + >> +<SECTION> >> +<FILE>instdone</FILE> >> +MAX_INSTDONE_BITS >> +instdone_bit >> +num_instdone_bits >> +init_instdone_definitions >> +</SECTION> >> + >> +<SECTION> >> +<FILE>intel_batchbuffer</FILE> >> +BATCH_SZ >> +BATCH_RESERVED >> +intel_batchbuffer >> +intel_batchbuffer_alloc >> +intel_batchbuffer_free >> +intel_batchbuffer_flush >> +intel_batchbuffer_flush_on_ring >> +intel_batchbuffer_flush_with_context >> +intel_batchbuffer_reset >> +intel_batchbuffer_data >> +intel_batchbuffer_emit_reloc >> +intel_batchbuffer_space >> +intel_batchbuffer_emit_dword >> +intel_batchbuffer_require_space >> +BEGIN_BATCH >> +OUT_BATCH >> +OUT_RELOC_FENCED >> +OUT_RELOC >> +ADVANCE_BATCH >> +BLIT_COPY_BATCH_START >> +COLOR_BLIT_COPY_BATCH_START >> +BLIT_RELOC_UDW >> +intel_blt_copy >> +intel_copy_bo >> +igt_buf >> +igt_buf_width >> +igt_buf_height >> +igt_render_copyfunc_t >> +igt_get_render_copyfunc >> +igt_media_fillfunc_t >> +igt_get_media_fillfunc >> +</SECTION> >> + >> +<SECTION> >> +<FILE>intel_chipset</FILE> >> +intel_get_pci_device >> +intel_get_drm_devid >> +intel_gen >> +pch_type >> +intel_check_pch >> +HAS_IBX >> +HAS_CPT >> +HAS_LPT >> +IS_MOBILE >> +IS_G45 >> +IS_GM45 >> +IS_G4X >> +IS_ILD >> +IS_ILM >> +IS_915 >> +IS_945GM >> +IS_945 >> +IS_G33 >> +IS_GEN2 >> +IS_GEN3 >> +IS_GEN4 >> +IS_GEN5 >> +IS_GEN6 >> +IS_GEN7 >> +IS_IVYBRIDGE >> +IS_VALLEYVIEW >> +IS_HSW_GT1 >> +IS_HSW_GT2 >> +IS_HSW_GT3 >> +IS_HASWELL >> +IS_BROADWELL >> +IS_CHERRYVIEW >> +IS_GEN8 >> +IS_965 >> +IS_9XX >> +IS_INTEL >> +HAS_PCH_SPLIT >> +HAS_BLT_RING >> +HAS_BSD_RING >> +IS_BROADWATER >> +IS_CRESTLINE >> +HAS_VEBOX_RING >> +</SECTION> >> + >> +<SECTION> >> +<FILE>intel_io</FILE> >> +mmio >> +intel_mmio_use_pci_bar >> +intel_mmio_use_dump_file >> +intel_register_access_init >> +intel_register_access_fini >> +intel_register_read >> +intel_register_write >> +intel_register_access_needs_fakewake >> +INREG >> +OUTREG >> +intel_dpio_reg_read >> +intel_dpio_reg_write >> +intel_flisdsi_reg_read >> +intel_flisdsi_reg_write >> +intel_punit_read >> +intel_punit_write >> +intel_nc_read >> +intel_nc_write >> +</SECTION> >> + >> +<SECTION> >> +<FILE>ioctl_wrappers</FILE> >> +gem_handle_to_libdrm_bo >> +gem_set_tiling >> +gem_set_caching >> +gem_get_caching >> +gem_flink >> +gem_open >> +gem_close >> +gem_write >> +gem_read >> +gem_set_domain >> +gem_sync >> +gem_create >> +gem_execbuf >> +gem_mmap__gtt >> +gem_mmap__cpu >> +gem_mmap >> +gem_madvise >> +gem_context_create >> +gem_sw_finish >> +gem_bo_busy >> +gem_get_num_rings >> +gem_has_enable_ring >> +gem_has_bsd >> +gem_has_blt >> +gem_has_vebox >> +gem_uses_aliasing_ppgtt >> +gem_available_fences >> +gem_available_aperture_size >> +gem_aperture_size >> +gem_mappable_aperture_size >> +gem_require_caching >> +gem_require_ring >> +prime_handle_to_fd >> +prime_fd_to_handle >> +prime_get_size >> +</SECTION> >> + >> +<SECTION> >> +<FILE>media_fill</FILE> >> +gen8_media_fillfunc >> +gen7_media_fillfunc >> +</SECTION> >> + >> +<SECTION> >> +<FILE>rendercopy</FILE> >> +gen8_render_copyfunc >> +gen7_render_copyfunc >> +gen6_render_copyfunc >> +gen3_render_copyfunc >> +gen2_render_copyfunc >> +</SECTION> >> + >> -- >> 1.9.3 >> >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch > --------------------------------------------------------------------- > Intel Corporation (UK) Limited > Registered No. 1134945 (England) > Registered Office: Pipers Way, Swindon SN3 1RJ > VAT No: 860 2173 47 > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies. > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [i-g-t 4/7] docs: add the sections file 2014-06-11 10:35 ` Thomas Wood @ 2014-06-11 11:56 ` Daniel Vetter 2014-06-11 14:49 ` [PATCH i-g-t] docs: always rebuild " Thomas Wood 0 siblings, 1 reply; 21+ messages in thread From: Daniel Vetter @ 2014-06-11 11:56 UTC (permalink / raw) To: Thomas Wood; +Cc: Intel Graphics Development On Wed, Jun 11, 2014 at 11:35:40AM +0100, Thomas Wood wrote: > On 10 June 2014 15:40, Daniel Vetter <daniel@ffwll.ch> wrote: > > On Tue, Jun 10, 2014 at 03:30:54PM +0100, Thomas Wood wrote: > >> This file can contain custom changes to the control the documentation > >> output and therefore should be included in the repository. > >> > >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> > > > > Doesn't that mean we need to update this when adding new symbols? Imo > > forcing autogeneration is better since you can control the order also by > > moving functions around in the .h files. Or what exactly is this for? > > -Daniel > > There are further annotations that can be made in this file, which is > why gtk-doc does not automatically overwrite it when symbols and > sections are added or removed: > > https://developer.gnome.org/gtk-doc-manual/stable/metafiles_sections.html.en Hm, I actually like the autogenerated one. Forcing people to do this by hand pretty much means that it will get lost in most cases - doing the api docs themselves is still often not done. So for now I'd actually prefer if we hack the Makefiles to unconditionally regen this, if possible. At least until we have a real use-case for this. -Daniel > > > > > >> --- > >> docs/reference/intel-gpu-tools/.gitignore | 1 - > >> .../intel-gpu-tools/intel-gpu-tools-sections.txt | 378 +++++++++++++++++++++ > >> 2 files changed, 378 insertions(+), 1 deletion(-) > >> create mode 100644 docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt > >> > >> diff --git a/docs/reference/intel-gpu-tools/.gitignore b/docs/reference/intel-gpu-tools/.gitignore > >> index 9415974..9fadbfc 100644 > >> --- a/docs/reference/intel-gpu-tools/.gitignore > >> +++ b/docs/reference/intel-gpu-tools/.gitignore > >> @@ -6,7 +6,6 @@ > >> /intel-gpu-tools-decl-list.txt > >> /intel-gpu-tools-decl.txt > >> /intel-gpu-tools-overrides.txt > >> -/intel-gpu-tools-sections.txt > >> /intel-gpu-tools-undeclared.txt > >> /intel-gpu-tools-undocumented.txt > >> /intel-gpu-tools-unused.txt > >> diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt > >> new file mode 100644 > >> index 0000000..de6c76c > >> --- /dev/null > >> +++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-sections.txt > >> @@ -0,0 +1,378 @@ > >> +<SECTION> > >> +<FILE>debug</FILE> > >> +DEBUG_PROTOCOL_VERSION > >> +COMMUNICATION_OFFSET > >> +COMMUNICATION_QWORD > >> +STATE_EU_MSG > >> +STATE_CPU_ACK > >> +STATE_OFFSET > >> +STATE_QWORD > >> +TX_OFFSET > >> +TX_QWORD > >> +RX_OFFSET > >> +RX_QWORD > >> +grf > >> +mrf > >> +cr > >> +sr > >> +DWORD8 > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>drmtest</FILE> > >> +mmap64 > >> +ARRAY_SIZE > >> +ALIGN > >> +drm_get_card > >> +drm_open_any > >> +drm_open_any_render > >> +gem_quiescent_gpu > >> +do_or_die > >> +do_ioctl > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>igt_aux</FILE> > >> +igt_fork_signal_helper > >> +igt_stop_signal_helper > >> +igt_exchange_int > >> +igt_permute_array > >> +igt_progress > >> +igt_check_boolean_env_var > >> +igt_aub_dump_enabled > >> +igt_init_aperture_trashers > >> +igt_trash_aperture > >> +igt_cleanup_aperture_trashers > >> +igt_system_suspend_autoresume > >> +igt_drop_root > >> +igt_wait_for_keypress > >> +igt_runtime_pm_status > >> +igt_setup_runtime_pm > >> +igt_get_runtime_pm_status > >> +igt_wait_for_pm_status > >> +intel_purge_vm_caches > >> +intel_get_avail_ram_mb > >> +intel_get_total_ram_mb > >> +intel_get_total_swap_mb > >> +intel_check_memory > >> +CHECK_RAM > >> +CHECK_SWAP > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>igt_core</FILE> > >> +IGT_EXIT_TIMEOUT > >> +IGT_EXIT_SKIP > >> +IGT_EXIT_SUCCESS > >> +igt_fixture > >> +igt_subtest_init > >> +igt_opt_handler_t > >> +igt_subtest_init_parse_opts > >> +igt_tokencat > >> +igt_subtest > >> +igt_subtest_f > >> +igt_subtest_name > >> +igt_only_list_subtests > >> +igt_main > >> +igt_simple_init > >> +igt_simple_main > >> +igt_skip > >> +igt_success > >> +igt_fail > >> +igt_exit > >> +igt_assert > >> +igt_assert_f > >> +igt_assert_cmpint > >> +igt_require > >> +igt_skip_on > >> +igt_require_f > >> +igt_skip_on_f > >> +igt_fork > >> +igt_waitchildren > >> +igt_helper_process > >> +igt_fork_helper > >> +igt_wait_helper > >> +igt_stop_helper > >> +igt_exit_handler_t > >> +igt_install_exit_handler > >> +igt_enable_exit_handler > >> +igt_disable_exit_handler > >> +igt_run_in_simulation > >> +SLOW_QUICK > >> +igt_skip_on_simulation > >> +igt_log_level > >> +igt_log > >> +igt_vlog > >> +igt_debug > >> +igt_info > >> +igt_warn > >> +igt_warn_on > >> +igt_warn_on_f > >> +igt_set_timeout > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>igt_debugfs</FILE> > >> +igt_debugfs_open > >> +igt_debugfs_fopen > >> +igt_pipe_crc_t > >> +igt_crc_t > >> +intel_pipe_crc_source > >> +igt_crc_is_null > >> +igt_crc_equal > >> +igt_crc_to_string > >> +igt_require_pipe_crc > >> +igt_pipe_crc_new > >> +igt_pipe_crc_free > >> +igt_pipe_crc_start > >> +igt_pipe_crc_stop > >> +igt_pipe_crc_get_crcs > >> +igt_pipe_crc_collect_crc > >> +DROP_UNBOUND > >> +DROP_BOUND > >> +DROP_RETIRE > >> +DROP_ACTIVE > >> +DROP_ALL > >> +igt_drop_caches_set > >> +igt_disable_prefault > >> +igt_enable_prefault > >> +igt_open_forcewake_handle > >> +stop_ring_flags > >> +igt_to_stop_ring_flag > >> +igt_set_stop_rings > >> +igt_get_stop_rings > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>igt_fb</FILE> > >> +cairo_surface_t > >> +cairo_t > >> +igt_fb > >> +igt_text_align > >> +igt_create_fb_with_bo_size > >> +igt_create_fb > >> +igt_create_color_fb > >> +igt_remove_fb > >> +igt_get_cairo_ctx > >> +igt_paint_color > >> +igt_paint_color_alpha > >> +igt_paint_color_gradient > >> +igt_paint_test_pattern > >> +igt_paint_image > >> +igt_write_fb_to_png > >> +igt_cairo_printf_line > >> +igt_bpp_depth_to_drm_format > >> +igt_drm_format_to_bpp > >> +igt_format_str > >> +igt_get_all_formats > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>igt_kms</FILE> > >> +pipe > >> +pipe_name > >> +igt_plane > >> +plane_name > >> +sprite_name > >> +port > >> +port_name > >> +kmstest_connector_config > >> +kmstest_get_connector_default_mode > >> +kmstest_get_connector_config > >> +kmstest_free_connector_config > >> +kmstest_dump_mode > >> +kmstest_get_pipe_from_crtc_id > >> +kmstest_pipe_str > >> +kmstest_encoder_type_str > >> +kmstest_connector_status_str > >> +kmstest_connector_type_str > >> +kmstest_set_connector_dpms > >> +igt_display_t > >> +igt_pipe_t > >> +igt_fixed_t > >> +igt_plane_t > >> +igt_pipe > >> +igt_output_t > >> +igt_display > >> +igt_set_vt_graphics_mode > >> +igt_display_init > >> +igt_display_fini > >> +igt_display_commit > >> +igt_display_get_n_pipes > >> +igt_output_name > >> +igt_output_get_mode > >> +igt_output_set_pipe > >> +igt_output_get_plane > >> +igt_plane_set_fb > >> +igt_plane_set_position > >> +igt_wait_for_vblank > >> +for_each_connected_output > >> +PIPE_ANY > >> +IGT_FIXED > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>instdone</FILE> > >> +MAX_INSTDONE_BITS > >> +instdone_bit > >> +num_instdone_bits > >> +init_instdone_definitions > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>intel_batchbuffer</FILE> > >> +BATCH_SZ > >> +BATCH_RESERVED > >> +intel_batchbuffer > >> +intel_batchbuffer_alloc > >> +intel_batchbuffer_free > >> +intel_batchbuffer_flush > >> +intel_batchbuffer_flush_on_ring > >> +intel_batchbuffer_flush_with_context > >> +intel_batchbuffer_reset > >> +intel_batchbuffer_data > >> +intel_batchbuffer_emit_reloc > >> +intel_batchbuffer_space > >> +intel_batchbuffer_emit_dword > >> +intel_batchbuffer_require_space > >> +BEGIN_BATCH > >> +OUT_BATCH > >> +OUT_RELOC_FENCED > >> +OUT_RELOC > >> +ADVANCE_BATCH > >> +BLIT_COPY_BATCH_START > >> +COLOR_BLIT_COPY_BATCH_START > >> +BLIT_RELOC_UDW > >> +intel_blt_copy > >> +intel_copy_bo > >> +igt_buf > >> +igt_buf_width > >> +igt_buf_height > >> +igt_render_copyfunc_t > >> +igt_get_render_copyfunc > >> +igt_media_fillfunc_t > >> +igt_get_media_fillfunc > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>intel_chipset</FILE> > >> +intel_get_pci_device > >> +intel_get_drm_devid > >> +intel_gen > >> +pch_type > >> +intel_check_pch > >> +HAS_IBX > >> +HAS_CPT > >> +HAS_LPT > >> +IS_MOBILE > >> +IS_G45 > >> +IS_GM45 > >> +IS_G4X > >> +IS_ILD > >> +IS_ILM > >> +IS_915 > >> +IS_945GM > >> +IS_945 > >> +IS_G33 > >> +IS_GEN2 > >> +IS_GEN3 > >> +IS_GEN4 > >> +IS_GEN5 > >> +IS_GEN6 > >> +IS_GEN7 > >> +IS_IVYBRIDGE > >> +IS_VALLEYVIEW > >> +IS_HSW_GT1 > >> +IS_HSW_GT2 > >> +IS_HSW_GT3 > >> +IS_HASWELL > >> +IS_BROADWELL > >> +IS_CHERRYVIEW > >> +IS_GEN8 > >> +IS_965 > >> +IS_9XX > >> +IS_INTEL > >> +HAS_PCH_SPLIT > >> +HAS_BLT_RING > >> +HAS_BSD_RING > >> +IS_BROADWATER > >> +IS_CRESTLINE > >> +HAS_VEBOX_RING > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>intel_io</FILE> > >> +mmio > >> +intel_mmio_use_pci_bar > >> +intel_mmio_use_dump_file > >> +intel_register_access_init > >> +intel_register_access_fini > >> +intel_register_read > >> +intel_register_write > >> +intel_register_access_needs_fakewake > >> +INREG > >> +OUTREG > >> +intel_dpio_reg_read > >> +intel_dpio_reg_write > >> +intel_flisdsi_reg_read > >> +intel_flisdsi_reg_write > >> +intel_punit_read > >> +intel_punit_write > >> +intel_nc_read > >> +intel_nc_write > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>ioctl_wrappers</FILE> > >> +gem_handle_to_libdrm_bo > >> +gem_set_tiling > >> +gem_set_caching > >> +gem_get_caching > >> +gem_flink > >> +gem_open > >> +gem_close > >> +gem_write > >> +gem_read > >> +gem_set_domain > >> +gem_sync > >> +gem_create > >> +gem_execbuf > >> +gem_mmap__gtt > >> +gem_mmap__cpu > >> +gem_mmap > >> +gem_madvise > >> +gem_context_create > >> +gem_sw_finish > >> +gem_bo_busy > >> +gem_get_num_rings > >> +gem_has_enable_ring > >> +gem_has_bsd > >> +gem_has_blt > >> +gem_has_vebox > >> +gem_uses_aliasing_ppgtt > >> +gem_available_fences > >> +gem_available_aperture_size > >> +gem_aperture_size > >> +gem_mappable_aperture_size > >> +gem_require_caching > >> +gem_require_ring > >> +prime_handle_to_fd > >> +prime_fd_to_handle > >> +prime_get_size > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>media_fill</FILE> > >> +gen8_media_fillfunc > >> +gen7_media_fillfunc > >> +</SECTION> > >> + > >> +<SECTION> > >> +<FILE>rendercopy</FILE> > >> +gen8_render_copyfunc > >> +gen7_render_copyfunc > >> +gen6_render_copyfunc > >> +gen3_render_copyfunc > >> +gen2_render_copyfunc > >> +</SECTION> > >> + > >> -- > >> 1.9.3 > >> > >> _______________________________________________ > >> Intel-gfx mailing list > >> Intel-gfx@lists.freedesktop.org > >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > > > -- > > Daniel Vetter > > Software Engineer, Intel Corporation > > +41 (0) 79 365 57 48 - http://blog.ffwll.ch > > --------------------------------------------------------------------- > > Intel Corporation (UK) Limited > > Registered No. 1134945 (England) > > Registered Office: Pipers Way, Swindon SN3 1RJ > > VAT No: 860 2173 47 > > > > This e-mail and any attachments may contain confidential material for > > the sole use of the intended recipient(s). Any review or distribution > > by others is strictly prohibited. If you are not the intended > > recipient, please contact the sender and delete all copies. > > -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH i-g-t] docs: always rebuild the sections file 2014-06-11 11:56 ` Daniel Vetter @ 2014-06-11 14:49 ` Thomas Wood 0 siblings, 0 replies; 21+ messages in thread From: Thomas Wood @ 2014-06-11 14:49 UTC (permalink / raw) To: intel-gfx Always rebuild the sections file since it currently doesn't contain any custom modifications. Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- docs/reference/intel-gpu-tools/Makefile.am | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/reference/intel-gpu-tools/Makefile.am b/docs/reference/intel-gpu-tools/Makefile.am index 549f34b..3368e3e 100644 --- a/docs/reference/intel-gpu-tools/Makefile.am +++ b/docs/reference/intel-gpu-tools/Makefile.am @@ -29,7 +29,7 @@ SCANGOBJ_OPTIONS= # Extra options to supply to gtkdoc-scan. # e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" -SCAN_OPTIONS= +SCAN_OPTIONS=--rebuild-sections # Extra options to supply to gtkdoc-mkdb. # e.g. MKDB_OPTIONS=--xml-mode --output-format=xml @@ -93,7 +93,7 @@ EXTRA_DIST += # Files not to distribute # for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types # for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt -#DISTCLEANFILES += +DISTCLEANFILES = $(DOC_MODULE)-sections.txt # Comment this out if you want 'make check' to test you doc status # and run some sanity checks -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [i-g-t 5/7] gitignore: add missing files and keep lists sorted 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood ` (2 preceding siblings ...) 2014-06-10 14:30 ` [i-g-t 4/7] docs: add the sections file Thomas Wood @ 2014-06-10 14:30 ` Thomas Wood 2014-06-10 14:30 ` [i-g-t 6/7] lib: various documentation fixes Thomas Wood ` (2 subsequent siblings) 6 siblings, 0 replies; 21+ messages in thread From: Thomas Wood @ 2014-06-10 14:30 UTC (permalink / raw) To: intel-gfx Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- tests/.gitignore | 11 +++++++---- tools/null_state_gen/.gitignore | 1 + 2 files changed, 8 insertions(+), 4 deletions(-) create mode 100644 tools/null_state_gen/.gitignore diff --git a/tests/.gitignore b/tests/.gitignore index d7ad054..a61d025 100644 --- a/tests/.gitignore +++ b/tests/.gitignore @@ -1,6 +1,6 @@ # Please keep sorted alphabetically -core_getclient core_get_client_auth +core_getclient core_getstats core_getversion ddi_compute_wrpll @@ -41,8 +41,8 @@ gem_exec_nop gem_exec_params gem_exec_parse gem_fd_exhaustion -gem_fenced_exec_thrash gem_fence_thrash +gem_fenced_exec_thrash gem_flink gem_flink_race gem_gtt_cpu_tlb @@ -77,9 +77,9 @@ gem_render_copy_redux gem_render_linear_blits gem_render_tiled_blits gem_reset_stats -gem_ringfill gem_ring_sync_copy gem_ring_sync_loop +gem_ringfill gem_seqno_wrap gem_set_tiling_vs_blt gem_set_tiling_vs_gtt @@ -118,17 +118,20 @@ igt_simulation kms_addfb kms_cursor_crc kms_fbc_crc +kms_fence_pin_leak kms_flip kms_flip_tiling +kms_mmio_vs_cs_flip kms_pipe_crc_basic kms_plane kms_render kms_setmode +kms_sink_crc_basic multi-tests.txt pm_lpsp -pm_rpm pm_psr pm_rc6_residency +pm_rpm pm_rps prime_nv_api prime_nv_pcopy diff --git a/tools/null_state_gen/.gitignore b/tools/null_state_gen/.gitignore new file mode 100644 index 0000000..170bcef --- /dev/null +++ b/tools/null_state_gen/.gitignore @@ -0,0 +1 @@ +intel_null_state_gen -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* [i-g-t 6/7] lib: various documentation fixes 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood ` (3 preceding siblings ...) 2014-06-10 14:30 ` [i-g-t 5/7] gitignore: add missing files and keep lists sorted Thomas Wood @ 2014-06-10 14:30 ` Thomas Wood 2014-06-10 14:44 ` Daniel Vetter 2014-06-10 14:30 ` [i-g-t 7/7] docs: add missing sections to intel-gpu-tools-docs.xml Thomas Wood 2014-06-10 14:37 ` [i-g-t 1/7] README: update piglit instructions Daniel Vetter 6 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-10 14:30 UTC (permalink / raw) To: intel-gfx Fix some documentation comments and mark some struct members private. Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- lib/igt_aux.c | 5 ++--- lib/igt_core.c | 10 +++++----- lib/igt_kms.h | 2 ++ lib/intel_batchbuffer.h | 5 +---- 4 files changed, 10 insertions(+), 12 deletions(-) diff --git a/lib/igt_aux.c b/lib/igt_aux.c index c0088d5..7b277be 100644 --- a/lib/igt_aux.c +++ b/lib/igt_aux.c @@ -430,10 +430,9 @@ bool igt_setup_runtime_pm(void) } /** - * igt_runtime_pm_status: + * igt_get_runtime_pm_status: * - * Returns: - * The current runtime PM status. + * Returns: The current runtime PM status. */ enum igt_runtime_pm_status igt_get_runtime_pm_status(void) { diff --git a/lib/igt_core.c b/lib/igt_core.c index 56eacf2..7ac7ebe 100644 --- a/lib/igt_core.c +++ b/lib/igt_core.c @@ -1031,11 +1031,11 @@ static void fatal_sig_handler(int sig) * @fn: exit handler function * * Set a handler that will be called either when the process calls exit() or - * returns from the main function, or one of the signals in 'handled_signals' - * is raised. MAX_EXIT_HANDLERS handlers can be installed, each of which will - * be called only once, even if a subsequent signal is raised. If the exit - * handlers are called due to a signal, the signal will be re-raised with the - * original signal disposition after all handlers returned. + * <!-- -->returns from the main function, or one of the signals in + * 'handled_signals' is raised. MAX_EXIT_HANDLERS handlers can be installed, + * each of which will be called only once, even if a subsequent signal is + * raised. If the exit handlers are called due to a signal, the signal will be + * re-raised with the original signal disposition after all handlers returned. * * The handler will be passed the signal number if called due to a signal, or * 0 otherwise. Exit handlers can also be used from test children spawned with diff --git a/lib/igt_kms.h b/lib/igt_kms.h index 8e80d4b..17bf0a2 100644 --- a/lib/igt_kms.h +++ b/lib/igt_kms.h @@ -99,6 +99,7 @@ typedef struct igt_pipe igt_pipe_t; typedef uint32_t igt_fixed_t; /* 16.16 fixed point */ typedef struct { + /*< private >*/ igt_pipe_t *pipe; int index; unsigned int is_primary : 1; @@ -127,6 +128,7 @@ struct igt_pipe { }; typedef struct { + /*< private >*/ igt_display_t *display; uint32_t id; /* KMS id */ struct kmstest_connector_config config; diff --git a/lib/intel_batchbuffer.h b/lib/intel_batchbuffer.h index 49dbcf0..3715161 100644 --- a/lib/intel_batchbuffer.h +++ b/lib/intel_batchbuffer.h @@ -204,14 +204,10 @@ void intel_copy_bo(struct intel_batchbuffer *batch, * @tiling: tiling mode bits * @data: pointer to the memory mapping of the buffer * @size: size of the buffer object - * @num_tiles: number of tiles of the buffer object * * This is a i-g-t buffer object wrapper structure which augments the baseline * libdrm buffer object with suitable data needed by the render copy and the * media fill functions. - * - * Note that @num_tiles is only used by gem_stress.c internally and can be - * ignored. */ struct igt_buf { drm_intel_bo *bo; @@ -219,6 +215,7 @@ struct igt_buf { uint32_t tiling; uint32_t *data; uint32_t size; + /*< private >*/ unsigned num_tiles; }; -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [i-g-t 6/7] lib: various documentation fixes 2014-06-10 14:30 ` [i-g-t 6/7] lib: various documentation fixes Thomas Wood @ 2014-06-10 14:44 ` Daniel Vetter 0 siblings, 0 replies; 21+ messages in thread From: Daniel Vetter @ 2014-06-10 14:44 UTC (permalink / raw) To: Thomas Wood; +Cc: intel-gfx On Tue, Jun 10, 2014 at 03:30:56PM +0100, Thomas Wood wrote: > Fix some documentation comments and mark some struct members private. > > Signed-off-by: Thomas Wood <thomas.wood@intel.com> > --- > lib/igt_aux.c | 5 ++--- > lib/igt_core.c | 10 +++++----- > lib/igt_kms.h | 2 ++ > lib/intel_batchbuffer.h | 5 +---- > 4 files changed, 10 insertions(+), 12 deletions(-) > > diff --git a/lib/igt_aux.c b/lib/igt_aux.c > index c0088d5..7b277be 100644 > --- a/lib/igt_aux.c > +++ b/lib/igt_aux.c > @@ -430,10 +430,9 @@ bool igt_setup_runtime_pm(void) > } > > /** > - * igt_runtime_pm_status: > + * igt_get_runtime_pm_status: > * > - * Returns: > - * The current runtime PM status. > + * Returns: The current runtime PM status. > */ > enum igt_runtime_pm_status igt_get_runtime_pm_status(void) > { > diff --git a/lib/igt_core.c b/lib/igt_core.c > index 56eacf2..7ac7ebe 100644 > --- a/lib/igt_core.c > +++ b/lib/igt_core.c > @@ -1031,11 +1031,11 @@ static void fatal_sig_handler(int sig) > * @fn: exit handler function > * > * Set a handler that will be called either when the process calls exit() or > - * returns from the main function, or one of the signals in 'handled_signals' > - * is raised. MAX_EXIT_HANDLERS handlers can be installed, each of which will > - * be called only once, even if a subsequent signal is raised. If the exit > - * handlers are called due to a signal, the signal will be re-raised with the > - * original signal disposition after all handlers returned. > + * <!-- -->returns from the main function, or one of the signals in Ugh, this is ugly. Maybe put a "prevent gtkdoc from parsing the returns" into the html comment block? > + * 'handled_signals' is raised. MAX_EXIT_HANDLERS handlers can be installed, > + * each of which will be called only once, even if a subsequent signal is > + * raised. If the exit handlers are called due to a signal, the signal will be > + * re-raised with the original signal disposition after all handlers returned. > * > * The handler will be passed the signal number if called due to a signal, or > * 0 otherwise. Exit handlers can also be used from test children spawned with > diff --git a/lib/igt_kms.h b/lib/igt_kms.h > index 8e80d4b..17bf0a2 100644 > --- a/lib/igt_kms.h > +++ b/lib/igt_kms.h > @@ -99,6 +99,7 @@ typedef struct igt_pipe igt_pipe_t; > typedef uint32_t igt_fixed_t; /* 16.16 fixed point */ > > typedef struct { > + /*< private >*/ > igt_pipe_t *pipe; > int index; > unsigned int is_primary : 1; > @@ -127,6 +128,7 @@ struct igt_pipe { > }; > > typedef struct { > + /*< private >*/ > igt_display_t *display; > uint32_t id; /* KMS id */ > struct kmstest_connector_config config; > diff --git a/lib/intel_batchbuffer.h b/lib/intel_batchbuffer.h > index 49dbcf0..3715161 100644 > --- a/lib/intel_batchbuffer.h > +++ b/lib/intel_batchbuffer.h > @@ -204,14 +204,10 @@ void intel_copy_bo(struct intel_batchbuffer *batch, > * @tiling: tiling mode bits > * @data: pointer to the memory mapping of the buffer > * @size: size of the buffer object > - * @num_tiles: number of tiles of the buffer object > * > * This is a i-g-t buffer object wrapper structure which augments the baseline > * libdrm buffer object with suitable data needed by the render copy and the > * media fill functions. > - * > - * Note that @num_tiles is only used by gem_stress.c internally and can be > - * ignored. > */ > struct igt_buf { > drm_intel_bo *bo; > @@ -219,6 +215,7 @@ struct igt_buf { > uint32_t tiling; > uint32_t *data; > uint32_t size; > + /*< private >*/ > unsigned num_tiles; > }; > > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* [i-g-t 7/7] docs: add missing sections to intel-gpu-tools-docs.xml 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood ` (4 preceding siblings ...) 2014-06-10 14:30 ` [i-g-t 6/7] lib: various documentation fixes Thomas Wood @ 2014-06-10 14:30 ` Thomas Wood 2014-06-10 14:47 ` Daniel Vetter 2014-06-10 14:37 ` [i-g-t 1/7] README: update piglit instructions Daniel Vetter 6 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-10 14:30 UTC (permalink / raw) To: intel-gfx Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml index dcfff33..96cf77f 100644 --- a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml +++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml @@ -15,6 +15,7 @@ <chapter> <title>Intel GPU Tools</title> + <xi:include href="xml/debug.xml"/> <xi:include href="xml/drmtest.xml"/> <xi:include href="xml/igt_core.xml"/> <xi:include href="xml/igt_debugfs.xml"/> @@ -22,9 +23,12 @@ <xi:include href="xml/igt_fb.xml"/> <xi:include href="xml/igt_aux.xml"/> <xi:include href="xml/ioctl_wrappers.xml"/> + <xi:include href="xml/instdone.xml"/> <xi:include href="xml/intel_batchbuffer.xml"/> <xi:include href="xml/intel_chipset.xml"/> <xi:include href="xml/intel_io.xml"/> + <xi:include href="xml/media_fill.xml"/> + <xi:include href="xml/rendercopy.xml"/> </chapter> <index id="api-index-full"> -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [i-g-t 7/7] docs: add missing sections to intel-gpu-tools-docs.xml 2014-06-10 14:30 ` [i-g-t 7/7] docs: add missing sections to intel-gpu-tools-docs.xml Thomas Wood @ 2014-06-10 14:47 ` Daniel Vetter 2014-06-11 10:36 ` Thomas Wood 0 siblings, 1 reply; 21+ messages in thread From: Daniel Vetter @ 2014-06-10 14:47 UTC (permalink / raw) To: Thomas Wood; +Cc: intel-gfx On Tue, Jun 10, 2014 at 03:30:57PM +0100, Thomas Wood wrote: > Signed-off-by: Thomas Wood <thomas.wood@intel.com> I've intentionally left these out since they're not really part of the core test library ... E.g. all public rendercopy functions are documented as part of the "intel batchbuffer" library. -Daniel > --- > docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml > index dcfff33..96cf77f 100644 > --- a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml > +++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml > @@ -15,6 +15,7 @@ > > <chapter> > <title>Intel GPU Tools</title> > + <xi:include href="xml/debug.xml"/> > <xi:include href="xml/drmtest.xml"/> > <xi:include href="xml/igt_core.xml"/> > <xi:include href="xml/igt_debugfs.xml"/> > @@ -22,9 +23,12 @@ > <xi:include href="xml/igt_fb.xml"/> > <xi:include href="xml/igt_aux.xml"/> > <xi:include href="xml/ioctl_wrappers.xml"/> > + <xi:include href="xml/instdone.xml"/> > <xi:include href="xml/intel_batchbuffer.xml"/> > <xi:include href="xml/intel_chipset.xml"/> > <xi:include href="xml/intel_io.xml"/> > + <xi:include href="xml/media_fill.xml"/> > + <xi:include href="xml/rendercopy.xml"/> > > </chapter> > <index id="api-index-full"> > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [i-g-t 7/7] docs: add missing sections to intel-gpu-tools-docs.xml 2014-06-10 14:47 ` Daniel Vetter @ 2014-06-11 10:36 ` Thomas Wood 2014-06-11 10:53 ` [PATCH i-g-t] docs: add private headers to IGNORE_HFILES Thomas Wood 0 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-11 10:36 UTC (permalink / raw) To: Daniel Vetter; +Cc: Intel Graphics Development On 10 June 2014 15:47, Daniel Vetter <daniel@ffwll.ch> wrote: > On Tue, Jun 10, 2014 at 03:30:57PM +0100, Thomas Wood wrote: >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> > > I've intentionally left these out since they're not really part of the > core test library ... E.g. all public rendercopy functions are documented > as part of the "intel batchbuffer" library. > -Daniel These functions currently appear in the API index and therefore produce warnings that there is no link for them. If they are private then they can be left out of the documentation altogether and their headers added to the IGNORE_HEADERS directive instead. > >> --- >> docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml >> index dcfff33..96cf77f 100644 >> --- a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml >> +++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml >> @@ -15,6 +15,7 @@ >> >> <chapter> >> <title>Intel GPU Tools</title> >> + <xi:include href="xml/debug.xml"/> >> <xi:include href="xml/drmtest.xml"/> >> <xi:include href="xml/igt_core.xml"/> >> <xi:include href="xml/igt_debugfs.xml"/> >> @@ -22,9 +23,12 @@ >> <xi:include href="xml/igt_fb.xml"/> >> <xi:include href="xml/igt_aux.xml"/> >> <xi:include href="xml/ioctl_wrappers.xml"/> >> + <xi:include href="xml/instdone.xml"/> >> <xi:include href="xml/intel_batchbuffer.xml"/> >> <xi:include href="xml/intel_chipset.xml"/> >> <xi:include href="xml/intel_io.xml"/> >> + <xi:include href="xml/media_fill.xml"/> >> + <xi:include href="xml/rendercopy.xml"/> >> >> </chapter> >> <index id="api-index-full"> >> -- >> 1.9.3 >> >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH i-g-t] docs: add private headers to IGNORE_HFILES 2014-06-11 10:36 ` Thomas Wood @ 2014-06-11 10:53 ` Thomas Wood 2014-06-11 11:57 ` Daniel Vetter 0 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-11 10:53 UTC (permalink / raw) To: intel-gfx Signed-off-by: Thomas Wood <thomas.wood@intel.com> --- docs/reference/intel-gpu-tools/Makefile.am | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/docs/reference/intel-gpu-tools/Makefile.am b/docs/reference/intel-gpu-tools/Makefile.am index daaa3f4..549f34b 100644 --- a/docs/reference/intel-gpu-tools/Makefile.am +++ b/docs/reference/intel-gpu-tools/Makefile.am @@ -58,7 +58,9 @@ EXTRA_HFILES= # Header files or dirs to ignore when scanning. Use base file/dir names # e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h private_code -IGNORE_HFILES=gen6_render.h gen7_media.h gen7_render.h gen8_media.h gen8_render.h i830_reg.h i915_3d.h i915_pciids.h i915_reg.h intel_reg.h +IGNORE_HFILES=gen6_render.h gen7_media.h gen7_render.h gen8_media.h \ + gen8_render.h i830_reg.h i915_3d.h i915_pciids.h i915_reg.h \ + intel_reg.h debug.h instdone.h media_fill.h rendercopy.h # Images to copy into HTML directory. # e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png -- 1.9.3 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH i-g-t] docs: add private headers to IGNORE_HFILES 2014-06-11 10:53 ` [PATCH i-g-t] docs: add private headers to IGNORE_HFILES Thomas Wood @ 2014-06-11 11:57 ` Daniel Vetter 0 siblings, 0 replies; 21+ messages in thread From: Daniel Vetter @ 2014-06-11 11:57 UTC (permalink / raw) To: Thomas Wood; +Cc: intel-gfx On Wed, Jun 11, 2014 at 11:53:51AM +0100, Thomas Wood wrote: > Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> > --- > docs/reference/intel-gpu-tools/Makefile.am | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/docs/reference/intel-gpu-tools/Makefile.am b/docs/reference/intel-gpu-tools/Makefile.am > index daaa3f4..549f34b 100644 > --- a/docs/reference/intel-gpu-tools/Makefile.am > +++ b/docs/reference/intel-gpu-tools/Makefile.am > @@ -58,7 +58,9 @@ EXTRA_HFILES= > > # Header files or dirs to ignore when scanning. Use base file/dir names > # e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h private_code > -IGNORE_HFILES=gen6_render.h gen7_media.h gen7_render.h gen8_media.h gen8_render.h i830_reg.h i915_3d.h i915_pciids.h i915_reg.h intel_reg.h > +IGNORE_HFILES=gen6_render.h gen7_media.h gen7_render.h gen8_media.h \ > + gen8_render.h i830_reg.h i915_3d.h i915_pciids.h i915_reg.h \ > + intel_reg.h debug.h instdone.h media_fill.h rendercopy.h > > # Images to copy into HTML directory. > # e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [i-g-t 1/7] README: update piglit instructions 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood ` (5 preceding siblings ...) 2014-06-10 14:30 ` [i-g-t 7/7] docs: add missing sections to intel-gpu-tools-docs.xml Thomas Wood @ 2014-06-10 14:37 ` Daniel Vetter 2014-06-10 15:06 ` Thomas Wood 6 siblings, 1 reply; 21+ messages in thread From: Daniel Vetter @ 2014-06-10 14:37 UTC (permalink / raw) To: Thomas Wood; +Cc: intel-gfx On Tue, Jun 10, 2014 at 03:30:51PM +0100, Thomas Wood wrote: > Piglit now has a top level "piglit" command and the location of the > tests can now be read from an environment variable. > > Signed-off-by: Thomas Wood <thomas.wood@intel.com> > --- > README | 27 ++++++++++----------------- > 1 file changed, 10 insertions(+), 17 deletions(-) > > diff --git a/README b/README > index 2cfb5c5..cfa186d 100644 > --- a/README > +++ b/README > @@ -34,32 +34,25 @@ tests/ > > git://anongit.freedesktop.org/piglit > > - and build it (no need to install anything). Then we need to link up the > - i-g-t sources with piglit > + There is no need to build and install piglit if it is only going to be > + used for running i-g-t tests. > + > + Set the IGT_TEST_ROOT environment variable to point to the tests > + directory or link up the i-g-t sources with piglit using a symlink: > > piglit-sources $ cd bin > piglit-sources/bin $ ln $i-g-t-sources igt -s > > - To avoid some hassles with piglit's use of Waffle just disable it. Run > - > - piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF . > - > - With > - > - piglit-sources $ ccmake . > - > - you can check your configuration with a curses interface, too. Hm, why did you drop this? I run into "lack of waffle" every time I try to use piglit ... Otherwise looks good. -Daniel > - > - The tests in the i-g-t sources need to have been built already. Then we > - can run the testcases with (as usual as root, no other drm clients > - running): > + In both cases, the tests in the i-g-t sources need to have been built > + already. Then we can run the testcases with (as usual as root, no other > + drm clients running): > > - piglit-sources # ./piglit-run.py igt <results-file> > + piglit-sources # ./piglit run igt <results-file> > > The testlist is built at runtime, so no need to update anything in > piglit when adding new tests. See > > - piglit-sources $ ./piglit-run.py -h > + piglit-sources $ ./piglit run -h > > for some useful options. > > -- > 1.9.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [i-g-t 1/7] README: update piglit instructions 2014-06-10 14:37 ` [i-g-t 1/7] README: update piglit instructions Daniel Vetter @ 2014-06-10 15:06 ` Thomas Wood 2014-06-10 15:28 ` Daniel Vetter 0 siblings, 1 reply; 21+ messages in thread From: Thomas Wood @ 2014-06-10 15:06 UTC (permalink / raw) To: Daniel Vetter; +Cc: Intel Graphics Development On 10 June 2014 15:37, Daniel Vetter <daniel@ffwll.ch> wrote: > On Tue, Jun 10, 2014 at 03:30:51PM +0100, Thomas Wood wrote: >> Piglit now has a top level "piglit" command and the location of the >> tests can now be read from an environment variable. >> >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> >> --- >> README | 27 ++++++++++----------------- >> 1 file changed, 10 insertions(+), 17 deletions(-) >> >> diff --git a/README b/README >> index 2cfb5c5..cfa186d 100644 >> --- a/README >> +++ b/README >> @@ -34,32 +34,25 @@ tests/ >> >> git://anongit.freedesktop.org/piglit >> >> - and build it (no need to install anything). Then we need to link up the >> - i-g-t sources with piglit >> + There is no need to build and install piglit if it is only going to be >> + used for running i-g-t tests. >> + >> + Set the IGT_TEST_ROOT environment variable to point to the tests >> + directory or link up the i-g-t sources with piglit using a symlink: >> >> piglit-sources $ cd bin >> piglit-sources/bin $ ln $i-g-t-sources igt -s >> >> - To avoid some hassles with piglit's use of Waffle just disable it. Run >> - >> - piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF . >> - >> - With >> - >> - piglit-sources $ ccmake . >> - >> - you can check your configuration with a curses interface, too. > > Hm, why did you drop this? I run into "lack of waffle" every time I try to > use piglit ... Otherwise looks good. Since there's no need to actually build the Piglit test cases when running intel-gpu-tools tests, there's no requirement for waffle either. > -Daniel > >> - >> - The tests in the i-g-t sources need to have been built already. Then we >> - can run the testcases with (as usual as root, no other drm clients >> - running): >> + In both cases, the tests in the i-g-t sources need to have been built >> + already. Then we can run the testcases with (as usual as root, no other >> + drm clients running): >> >> - piglit-sources # ./piglit-run.py igt <results-file> >> + piglit-sources # ./piglit run igt <results-file> >> >> The testlist is built at runtime, so no need to update anything in >> piglit when adding new tests. See >> >> - piglit-sources $ ./piglit-run.py -h >> + piglit-sources $ ./piglit run -h >> >> for some useful options. >> >> -- >> 1.9.3 >> >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- > Daniel Vetter > Software Engineer, Intel Corporation > +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [i-g-t 1/7] README: update piglit instructions 2014-06-10 15:06 ` Thomas Wood @ 2014-06-10 15:28 ` Daniel Vetter 0 siblings, 0 replies; 21+ messages in thread From: Daniel Vetter @ 2014-06-10 15:28 UTC (permalink / raw) To: Thomas Wood; +Cc: Intel Graphics Development On Tue, Jun 10, 2014 at 04:06:17PM +0100, Thomas Wood wrote: > On 10 June 2014 15:37, Daniel Vetter <daniel@ffwll.ch> wrote: > > On Tue, Jun 10, 2014 at 03:30:51PM +0100, Thomas Wood wrote: > >> Piglit now has a top level "piglit" command and the location of the > >> tests can now be read from an environment variable. > >> > >> Signed-off-by: Thomas Wood <thomas.wood@intel.com> > >> --- > >> README | 27 ++++++++++----------------- > >> 1 file changed, 10 insertions(+), 17 deletions(-) > >> > >> diff --git a/README b/README > >> index 2cfb5c5..cfa186d 100644 > >> --- a/README > >> +++ b/README > >> @@ -34,32 +34,25 @@ tests/ > >> > >> git://anongit.freedesktop.org/piglit > >> > >> - and build it (no need to install anything). Then we need to link up the > >> - i-g-t sources with piglit > >> + There is no need to build and install piglit if it is only going to be > >> + used for running i-g-t tests. > >> + > >> + Set the IGT_TEST_ROOT environment variable to point to the tests > >> + directory or link up the i-g-t sources with piglit using a symlink: > >> > >> piglit-sources $ cd bin > >> piglit-sources/bin $ ln $i-g-t-sources igt -s > >> > >> - To avoid some hassles with piglit's use of Waffle just disable it. Run > >> - > >> - piglit-sources $ cmake -D PIGLIT_USE_WAFFLE=OFF . > >> - > >> - With > >> - > >> - piglit-sources $ ccmake . > >> - > >> - you can check your configuration with a curses interface, too. > > > > Hm, why did you drop this? I run into "lack of waffle" every time I try to > > use piglit ... Otherwise looks good. > > Since there's no need to actually build the Piglit test cases when > running intel-gpu-tools tests, there's no requirement for waffle > either. Oh right ;-) Can you please mention this for dummies like me? -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2014-06-11 14:49 UTC | newest] Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-06-10 14:30 [i-g-t 1/7] README: update piglit instructions Thomas Wood 2014-06-10 14:30 ` [i-g-t 2/7] lib: remove /** from comments that are not API documentation Thomas Wood 2014-06-10 14:30 ` [i-g-t 3/7] README: update the section on modifying and rebuilding documentation Thomas Wood 2014-06-10 14:38 ` Daniel Vetter 2014-06-11 10:33 ` Thomas Wood 2014-06-10 14:30 ` [i-g-t 4/7] docs: add the sections file Thomas Wood 2014-06-10 14:40 ` Daniel Vetter 2014-06-11 10:35 ` Thomas Wood 2014-06-11 11:56 ` Daniel Vetter 2014-06-11 14:49 ` [PATCH i-g-t] docs: always rebuild " Thomas Wood 2014-06-10 14:30 ` [i-g-t 5/7] gitignore: add missing files and keep lists sorted Thomas Wood 2014-06-10 14:30 ` [i-g-t 6/7] lib: various documentation fixes Thomas Wood 2014-06-10 14:44 ` Daniel Vetter 2014-06-10 14:30 ` [i-g-t 7/7] docs: add missing sections to intel-gpu-tools-docs.xml Thomas Wood 2014-06-10 14:47 ` Daniel Vetter 2014-06-11 10:36 ` Thomas Wood 2014-06-11 10:53 ` [PATCH i-g-t] docs: add private headers to IGNORE_HFILES Thomas Wood 2014-06-11 11:57 ` Daniel Vetter 2014-06-10 14:37 ` [i-g-t 1/7] README: update piglit instructions Daniel Vetter 2014-06-10 15:06 ` Thomas Wood 2014-06-10 15:28 ` Daniel Vetter
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.