[PATCH RFC v2 3/3] documentation/iommu: Add description of Hisilicon SMMU private binding

[will.deacon@arm.com (Will Deacon)]

On Tue, Jun 17, 2014 at 08:50:20AM +0100, leizhen wrote:
> On 2014/6/17 0:39, Will Deacon wrote:
> > On Thu, Jun 12, 2014 at 06:08:12AM +0100, Zhen Lei wrote:
> >> This patch adds a description of private properties for the Hisilicon
> >> System MMU architecture.
> >>
> >> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> >> ---
> >>  Documentation/devicetree/bindings/iommu/arm,smmu.txt | 16 ++++++++++++++++
> >>  1 file changed, 16 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> >> index f284b99..75b1351 100644
> >> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> >> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> >> @@ -15,6 +15,7 @@ conditions.
> >>                          "arm,smmu-v2"
> >>                          "arm,mmu-400"
> >>                          "arm,mmu-500"
> >> +                        "hisilicon,smmu-v1"
> >>
> >>                    depending on the particular implementation and/or the
> >>                    version of the architecture implemented.
> >> @@ -54,6 +55,21 @@ conditions.
> >>                    aliases of secure registers have to be used during
> >>                    SMMU configuration.
> >>
> >> +** Hisilicon SMMU private properties:
> >> +
> >> +- smmu-force-memtype : A list of StreamIDs which not translate address but
> >> +                  translate attributes. The StreamIDs list here can not be
> >> +                  used for map(translation) mode again.
> >> +                  StreamID first, then the type list below:
> >> +                  1, cahceable, WBRAWA, Normal outer and inner write-back
> >> +                  2, non-cacheable, Normal outer and inner non-cacheable
> >> +                  3, device, nGnRE
> >> +                  others, bypass
> >> +
> >> +- smmu-bypass-vmid   : Specify which context bank is used for bypass mode.
> >> +                  If omit, vmid=255 is default. If bypass and map mode can
> >> +                  share a same S2CR, config vmid=0.
> > 
> > These don't feel like they belong in the device-tree to me. Is the list of
> > StreamIDs described in smmu-force-memtype a property of the hardware
> > configuration, or a software policy to allow you to generate cacheable
> > traffic for particular masters?
> > 
> > Will
> > 
> > .
> > 
> OK, I will put these description into a sperate file, hisilicon,smmu.txt
> and mark a reference to arm,smmu.txt

No, don't do that. Delete the properties instead. I'm not a device-tree
expert, but these don't feel like things we should be describing there at
all.

> The latter case. Some masters driver want use cacheable(WB) attribute to access
> memory, but the masters can not bring cacheable attribute. So, can not use
> bypass(or transaction) mode. In fact, the master driver can use iommu_map to
> create map and specify IOMMU_CACHE. But maybe the driver does not want to
> map, if the memory access is very dynamically, frequently map and unmap will
> decrease performance.

You seem to be highlighting a perceived deficiency in the IOMMU API which
you're attempting to work-around with new device-tree properties. Instead,
why not propose an extension to the IOMMU API in Linux?

> Actually, I think smmu-force-memtype maybe suitable for arm-smmu too. But now,
> if nobody declear need it, I will just implement it in hisi-smmu.c

I don't want to see hisi-smmu.c at all. You need to make your driver fit
into the code we already have.

Do you have a specification available describing the hardware you have
created?

> A big issue should be discussed now. When a master use bypass mode to access
> memory, this means it can access all non-secure memory. So, if a master can
> be operated in user mode, that means a user process can access any kernel
> memory. In ARM smmu-v2 specification, SMMU_S2CRn.PRIVCFG is used for determine
> output priviledge attribute. But if use bypass mode and output attribute is
> Unprivileged, specification have no mention about where to decide memory access
> is permitted or not. Do you think is a spec design bug or Implemention
> defined, or find some description anywhere.

There are various overrides for the privilege controls but, as Varun said,
you should be using VFIO for userspace device access.

Will