[PATCH RFC v2 3/3] documentation/iommu: Add description of Hisilicon SMMU private binding

[thunder.leizhen@huawei.com (leizhen)]

On 2014/6/17 0:39, Will Deacon wrote:
> On Thu, Jun 12, 2014 at 06:08:12AM +0100, Zhen Lei wrote:
>> This patch adds a description of private properties for the Hisilicon
>> System MMU architecture.
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>>  Documentation/devicetree/bindings/iommu/arm,smmu.txt | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
>> index f284b99..75b1351 100644
>> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
>> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
>> @@ -15,6 +15,7 @@ conditions.
>>                          "arm,smmu-v2"
>>                          "arm,mmu-400"
>>                          "arm,mmu-500"
>> +                        "hisilicon,smmu-v1"
>>
>>                    depending on the particular implementation and/or the
>>                    version of the architecture implemented.
>> @@ -54,6 +55,21 @@ conditions.
>>                    aliases of secure registers have to be used during
>>                    SMMU configuration.
>>
>> +** Hisilicon SMMU private properties:
>> +
>> +- smmu-force-memtype : A list of StreamIDs which not translate address but
>> +                  translate attributes. The StreamIDs list here can not be
>> +                  used for map(translation) mode again.
>> +                  StreamID first, then the type list below:
>> +                  1, cahceable, WBRAWA, Normal outer and inner write-back
>> +                  2, non-cacheable, Normal outer and inner non-cacheable
>> +                  3, device, nGnRE
>> +                  others, bypass
>> +
>> +- smmu-bypass-vmid   : Specify which context bank is used for bypass mode.
>> +                  If omit, vmid=255 is default. If bypass and map mode can
>> +                  share a same S2CR, config vmid=0.
> 
> These don't feel like they belong in the device-tree to me. Is the list of
> StreamIDs described in smmu-force-memtype a property of the hardware
> configuration, or a software policy to allow you to generate cacheable
> traffic for particular masters?
> 
> Will
> 
> .
> 
OK, I will put these description into a sperate file, hisilicon,smmu.txt
and mark a reference to arm,smmu.txt

The latter case. Some masters driver want use cacheable(WB) attribute to access
memory, but the masters can not bring cacheable attribute. So, can not use
bypass(or transaction) mode. In fact, the master driver can use iommu_map to
create map and specify IOMMU_CACHE. But maybe the driver does not want to
map, if the memory access is very dynamically, frequently map and unmap will
decrease performance.

Actually, I think smmu-force-memtype maybe suitable for arm-smmu too. But now,
if nobody declear need it, I will just implement it in hisi-smmu.c

A big issue should be discussed now. When a master use bypass mode to access
memory, this means it can access all non-secure memory. So, if a master can
be operated in user mode, that means a user process can access any kernel
memory. In ARM smmu-v2 specification, SMMU_S2CRn.PRIVCFG is used for determine
output priviledge attribute. But if use bypass mode and output attribute is
Unprivileged, specification have no mention about where to decide memory access
is permitted or not. Do you think is a spec design bug or Implemention
defined, or find some description anywhere.