* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
@ 2014-06-18 22:10 Arnout Vandecappelle
2014-06-20 20:04 ` Yann E. MORIN
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Arnout Vandecappelle @ 2014-06-18 22:10 UTC (permalink / raw)
To: buildroot
The graph-depends commands cd into the CONFIG_DIR and run the script
from there. However, this means that when $(O) is a relative path, it
will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index 5c82355..dd350b6 100644
--- a/Makefile
+++ b/Makefile
@@ -676,8 +676,8 @@ graph-depends:
@$(INSTALL) -d $(O)/graphs
@cd "$(CONFIG_DIR)"; \
$(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
- |tee $(O)/graphs/$(@).dot \
- |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(O)/graphs/$(@).$(BR_GRAPH_OUT)
+ |tee $(BASE_DIR)/graphs/$(@).dot \
+ |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
--
2.0.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-18 22:10 [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path Arnout Vandecappelle
@ 2014-06-20 20:04 ` Yann E. MORIN
2014-06-20 20:07 ` Arnout Vandecappelle
2014-06-23 20:51 ` Yann E. MORIN
2014-06-20 20:55 ` Yann E. MORIN
2014-06-29 8:52 ` Thomas Petazzoni
2 siblings, 2 replies; 11+ messages in thread
From: Yann E. MORIN @ 2014-06-20 20:04 UTC (permalink / raw)
To: buildroot
Arnout, All,
On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> The graph-depends commands cd into the CONFIG_DIR and run the script
> from there. However, this means that when $(O) is a relative path, it
> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested with this sequence:
cd buildroot
make manual-html
make O=../br.build-1 manual-html
cd ..
make -C buildroot O=../br.build-2 manual-html
make -C buildroot O=$(pwd)/br.build-3
mkdir br.build-4
cd br.build-4
make defconfig (to create the Makefile wrapper)
make manual-html
All generate the HTML manual, and a cursory look does not show any
diference.
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> Makefile | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 5c82355..dd350b6 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -676,8 +676,8 @@ graph-depends:
> @$(INSTALL) -d $(O)/graphs
> @cd "$(CONFIG_DIR)"; \
> $(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
> - |tee $(O)/graphs/$(@).dot \
> - |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(O)/graphs/$(@).$(BR_GRAPH_OUT)
> + |tee $(BASE_DIR)/graphs/$(@).dot \
> + |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
>
> else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
>
> --
> 2.0.0
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-20 20:04 ` Yann E. MORIN
@ 2014-06-20 20:07 ` Arnout Vandecappelle
2014-06-20 20:14 ` Yann E. MORIN
2014-06-23 20:51 ` Yann E. MORIN
1 sibling, 1 reply; 11+ messages in thread
From: Arnout Vandecappelle @ 2014-06-20 20:07 UTC (permalink / raw)
To: buildroot
On 20/06/14 22:04, Yann E. MORIN wrote:
> Arnout, All,
>
> On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
>> The graph-depends commands cd into the CONFIG_DIR and run the script
>> from there. However, this means that when $(O) is a relative path, it
>> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
>>
>> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
>
> Tested with this sequence:
> cd buildroot
> make manual-html
> make O=../br.build-1 manual-html
> cd ..
> make -C buildroot O=../br.build-2 manual-html
> make -C buildroot O=$(pwd)/br.build-3
> mkdir br.build-4
> cd br.build-4
> make defconfig (to create the Makefile wrapper)
> make manual-html
Call me stupid, but why is it relevant to test this patch with manual-html?
Regards,
Arnout
>
> All generate the HTML manual, and a cursory look does not show any
> diference.
>
> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
>
> Regards,
> Yann E. MORIN.
>
>> ---
>> Makefile | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/Makefile b/Makefile
>> index 5c82355..dd350b6 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -676,8 +676,8 @@ graph-depends:
>> @$(INSTALL) -d $(O)/graphs
>> @cd "$(CONFIG_DIR)"; \
>> $(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
>> - |tee $(O)/graphs/$(@).dot \
>> - |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(O)/graphs/$(@).$(BR_GRAPH_OUT)
>> + |tee $(BASE_DIR)/graphs/$(@).dot \
>> + |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
>>
>> else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
>>
>> --
>> 2.0.0
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-20 20:07 ` Arnout Vandecappelle
@ 2014-06-20 20:14 ` Yann E. MORIN
0 siblings, 0 replies; 11+ messages in thread
From: Yann E. MORIN @ 2014-06-20 20:14 UTC (permalink / raw)
To: buildroot
Arnout, All,
On 2014-06-20 22:07 +0200, Arnout Vandecappelle spake thusly:
> On 20/06/14 22:04, Yann E. MORIN wrote:
> > Arnout, All,
> >
> > On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> >> The graph-depends commands cd into the CONFIG_DIR and run the script
> >> from there. However, this means that when $(O) is a relative path, it
> >> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
> >>
> >> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> >
> > Tested with this sequence:
> > cd buildroot
> > make manual-html
> > make O=../br.build-1 manual-html
> > cd ..
> > make -C buildroot O=../br.build-2 manual-html
> > make -C buildroot O=$(pwd)/br.build-3
> > mkdir br.build-4
> > cd br.build-4
> > make defconfig (to create the Makefile wrapper)
> > make manual-html
>
> Call me stupid, but why is it relevant to test this patch with manual-html?
Err... Hmm... Well...
OK, back to the shell I am... ;-)
Sorry, sorry, sorry...
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-18 22:10 [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path Arnout Vandecappelle
2014-06-20 20:04 ` Yann E. MORIN
@ 2014-06-20 20:55 ` Yann E. MORIN
2014-06-23 5:28 ` Arnout Vandecappelle
2014-06-29 8:52 ` Thomas Petazzoni
2 siblings, 1 reply; 11+ messages in thread
From: Yann E. MORIN @ 2014-06-20 20:55 UTC (permalink / raw)
To: buildroot
Arnout, All,
On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> The graph-depends commands cd into the CONFIG_DIR and run the script
> from there. However, this means that when $(O) is a relative path, it
> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Suddenly I realised that something must be wrong with this patch.
$(O) is always expected to be relative the buildroot tree, not the
current directory:
http://nightly.buildroot.org/#_building_out_of_tree
---8<---
Note: the O path can be either an absolute or a relative path, but
if it?s passed as a relative path, it is important to note that it is
interpreted relative to the main Buildroot source directory, not the
current working directory.
---8<---
So I fail to see what case this patch is supposed to fix.
I tried with thisscript, and did not notice any difference between the
two runs, one with master, the second with the patch applied:
#!/bin/sh
set -e
BR="${HOME}/cache/upstream/buildroot"
rm -rf br*
do_prep() {
local dir="${1}"
(
git clone "${BR}" "${dir}"
cd "${dir}"
git pwam 361761 # Comment-out to use master
)
}
echo '======== In-tree'
do_prep br-1
cd br-1
make defconfig
make graph-depends
cd ..
echo '======== Out-of-tree, called out of top-dir, relative'
do_prep br-2
mkdir br.build-2
make -C br-2 O=../br.build-2 defconfig
make -C br-2 O=../br.build-2 graph-depends
echo '======== Out-of-tree, called from top-dir, relative'
do_prep br-3
mkdir br.build-3
cd br-3
make O=../br.build-3 defconfig
make O=../br.build-3 graph-depends
cd ..
echo '======== Out-of-tree, called from O-dir, absolute'
do_prep br-4
mkdir br.build-4
cd br.build-4
make -C ../br-4 O=$(pwd) defconfig
make graph-depends
cd ..
echo '======== Out-of-tree, called out of top-dir, absolute '
do_prep br-5
mkdir br.build-5
make -C br-4 O=$(pwd)/br.build-5 defconfig
make -C br-4 O=$(pwd)/br.build-5 graph-depends
echo '======== Out-of-tree, called fromother dir, absolute-relative'
do_prep br-6
mkdir br.build-6.1
mkdir br.build-6.2
cd br.build-6.1
make -C ../br-6 O=$(pwd)/../br.build-6.2 defconfig
make -C ../br-6 O=$(pwd)/../br.build-6.2 graph-depends
cd ..
In both cases (with or without the patch), cases 1, 3 and 4 succeed,
while cases 2, 5 and 6 fail.
What case(s) did I miss?
Regards,
Yann E. MORIN.
> ---
> Makefile | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 5c82355..dd350b6 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -676,8 +676,8 @@ graph-depends:
> @$(INSTALL) -d $(O)/graphs
> @cd "$(CONFIG_DIR)"; \
> $(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
> - |tee $(O)/graphs/$(@).dot \
> - |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(O)/graphs/$(@).$(BR_GRAPH_OUT)
> + |tee $(BASE_DIR)/graphs/$(@).dot \
> + |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
>
> else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
>
> --
> 2.0.0
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-20 20:55 ` Yann E. MORIN
@ 2014-06-23 5:28 ` Arnout Vandecappelle
2014-06-23 17:03 ` Yann E. MORIN
0 siblings, 1 reply; 11+ messages in thread
From: Arnout Vandecappelle @ 2014-06-23 5:28 UTC (permalink / raw)
To: buildroot
On 20/06/14 22:55, Yann E. MORIN wrote:
> Arnout, All,
>
> On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
>> The graph-depends commands cd into the CONFIG_DIR and run the script
>> from there. However, this means that when $(O) is a relative path, it
>> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
>>
>> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
>
> Suddenly I realised that something must be wrong with this patch.
> $(O) is always expected to be relative the buildroot tree, not the
> current directory:
> http://nightly.buildroot.org/#_building_out_of_tree
>
> ---8<---
> Note: the O path can be either an absolute or a relative path, but
> if it?s passed as a relative path, it is important to note that it is
> interpreted relative to the main Buildroot source directory, not the
> current working directory.
> ---8<---
>
> So I fail to see what case this patch is supposed to fix.
>
> I tried with thisscript, and did not notice any difference between the
> two runs, one with master, the second with the patch applied:
>
> #!/bin/sh
> set -e
>
> BR="${HOME}/cache/upstream/buildroot"
> rm -rf br*
>
> do_prep() {
> local dir="${1}"
> (
> git clone "${BR}" "${dir}"
> cd "${dir}"
> git pwam 361761 # Comment-out to use master
> )
> }
>
> echo '======== In-tree'
> do_prep br-1
> cd br-1
> make defconfig
> make graph-depends
> cd ..
>
> echo '======== Out-of-tree, called out of top-dir, relative'
> do_prep br-2
> mkdir br.build-2
> make -C br-2 O=../br.build-2 defconfig
> make -C br-2 O=../br.build-2 graph-depends
>
> echo '======== Out-of-tree, called from top-dir, relative'
> do_prep br-3
> mkdir br.build-3
> cd br-3
> make O=../br.build-3 defconfig
> make O=../br.build-3 graph-depends
> cd ..
>
> echo '======== Out-of-tree, called from O-dir, absolute'
> do_prep br-4
> mkdir br.build-4
> cd br.build-4
> make -C ../br-4 O=$(pwd) defconfig
> make graph-depends
> cd ..
>
> echo '======== Out-of-tree, called out of top-dir, absolute '
> do_prep br-5
> mkdir br.build-5
> make -C br-4 O=$(pwd)/br.build-5 defconfig
> make -C br-4 O=$(pwd)/br.build-5 graph-depends
>
> echo '======== Out-of-tree, called fromother dir, absolute-relative'
> do_prep br-6
> mkdir br.build-6.1
> mkdir br.build-6.2
> cd br.build-6.1
> make -C ../br-6 O=$(pwd)/../br.build-6.2 defconfig
> make -C ../br-6 O=$(pwd)/../br.build-6.2 graph-depends
> cd ..
>
> In both cases (with or without the patch), cases 1, 3 and 4 succeed,
> while cases 2, 5 and 6 fail.
>
> What case(s) did I miss?
First of all, for me all these cases succeed both with and without the patch.
Unfortunately, the example you took happens to work by accident:
$ make -n O=../br.build graph-depends
dot -? >/dev/null 2>&1 || \
(echo "ERROR: The 'dot' program from Graphviz is needed for
graph-depends" >&2; exit 1)
/usr/bin/install -d ../br.build/graphs
cd "../br.build"; \
/home/arnout/src/buildroot/support/scripts/graph-depends \
|tee ../br.build/graphs/graph-depends.dot \
|dot -Tpdf -o ../br.build/graphs/graph-depends.pdf
Since we cd into ../br.build and then resolve $(O) as ../br.build, it just
happens to be the same directory. Using any other combination of . and .. a $(O)
triggers the problem. So try
do_prep br-7
make -C br-7 O=./br.build-7 defconfig
make -C br-7 O=./br.build-7 graph-depends
The graph-depends will fail with:
tee: br.build-7/graphs/graph-depends.dot: No such file or directory
Getting targets
Getting dependencies for ['host-binutils', 'host-gmp', 'host-mpc', 'host-mpfr',
'uclibc', 'host-fakeroot', 'host-gcc-final', 'host-makedevs',
'toolchain-buildroot', 'toolchain', 'busybox', 'rootfs-tar']
Getting dependencies for ['host-m4', 'linux-headers', 'host-gcc-initial']
br.build-7/graphs/graph-depends.pdf: No such file or directory
Makefile:677: recipe for target 'graph-depends' failed
make: *** [graph-depends] Error 1
Regards,
Arnout
>
> Regards,
> Yann E. MORIN.
>
>> ---
>> Makefile | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/Makefile b/Makefile
>> index 5c82355..dd350b6 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -676,8 +676,8 @@ graph-depends:
>> @$(INSTALL) -d $(O)/graphs
>> @cd "$(CONFIG_DIR)"; \
>> $(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
>> - |tee $(O)/graphs/$(@).dot \
>> - |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(O)/graphs/$(@).$(BR_GRAPH_OUT)
>> + |tee $(BASE_DIR)/graphs/$(@).dot \
>> + |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
>>
>> else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
>>
>> --
>> 2.0.0
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-23 5:28 ` Arnout Vandecappelle
@ 2014-06-23 17:03 ` Yann E. MORIN
2014-06-23 19:16 ` Arnout Vandecappelle
0 siblings, 1 reply; 11+ messages in thread
From: Yann E. MORIN @ 2014-06-23 17:03 UTC (permalink / raw)
To: buildroot
Arnout, All,
On 2014-06-23 07:28 +0200, Arnout Vandecappelle spake thusly:
> On 20/06/14 22:55, Yann E. MORIN wrote:
> > On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> >> The graph-depends commands cd into the CONFIG_DIR and run the script
> >> from there. However, this means that when $(O) is a relative path, it
> >> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
> >>
> >> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> > I tried with thisscript, and did not notice any difference between the
> > two runs, one with master, the second with the patch applied:
[--SNIP long script--]
> First of all, for me all these cases succeed both with and without the patch.
You mean all the 6 cases do work for you? Weird.
I don't see how it can work, since calling this
make -C buildroot O=somewhere goal
will not have the --no-print-directory option, and thus make would print
its usual "Entering/Leaving directory blabla" which confuses
graph-depends.py
There is not much we can do about that, since our out-of-tree Makefile
wrapper is never called.
Even worse, if you do
make -C buildroot O=somewhere defconfig
make -C somewhere graph-depends
then even though we do use our Makefile wrapper in this case, the
--no-print-directory option is not used! So make would still print its
"Entering/Leaving directory blabla" (and thus graph-depends will get
confused.)
> Using any other combination of . and .. a $(O)
> triggers the problem. So try
>
> do_prep br-7
> make -C br-7 O=./br.build-7 defconfig
> make -C br-7 O=./br.build-7 graph-depends
OK, that's a use-case I was missing.
> The graph-depends will fail with:
>
> tee: br.build-7/graphs/graph-depends.dot: No such file or directory
> Getting targets
> Getting dependencies for ['host-binutils', 'host-gmp', 'host-mpc', 'host-mpfr',
> 'uclibc', 'host-fakeroot', 'host-gcc-final', 'host-makedevs',
> 'toolchain-buildroot', 'toolchain', 'busybox', 'rootfs-tar']
> Getting dependencies for ['host-m4', 'linux-headers', 'host-gcc-initial']
> br.build-7/graphs/graph-depends.pdf: No such file or directory
> Makefile:677: recipe for target 'graph-depends' failed
> make: *** [graph-depends] Error 1
OK, it fails here, too, but your patch does not change anything: it
fails without your patch, and it fails with your patch applied.
I'm using make-3.81, if that shall be a differentiator.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-23 17:03 ` Yann E. MORIN
@ 2014-06-23 19:16 ` Arnout Vandecappelle
2014-06-23 20:48 ` Yann E. MORIN
0 siblings, 1 reply; 11+ messages in thread
From: Arnout Vandecappelle @ 2014-06-23 19:16 UTC (permalink / raw)
To: buildroot
On 23/06/14 19:03, Yann E. MORIN wrote:
> Arnout, All,
>
> On 2014-06-23 07:28 +0200, Arnout Vandecappelle spake thusly:
>> On 20/06/14 22:55, Yann E. MORIN wrote:
>>> On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
>>>> The graph-depends commands cd into the CONFIG_DIR and run the script
>>>> from there. However, this means that when $(O) is a relative path, it
>>>> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
>>>>
>>>> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
>>> I tried with thisscript, and did not notice any difference between the
>>> two runs, one with master, the second with the patch applied:
> [--SNIP long script--]
>> First of all, for me all these cases succeed both with and without the patch.
>
> You mean all the 6 cases do work for you? Weird.
>
> I don't see how it can work, since calling this
> make -C buildroot O=somewhere goal
>
> will not have the --no-print-directory option, and thus make would print
> its usual "Entering/Leaving directory blabla" which confuses
> graph-depends.py
Oh sorry, I didn't look at the output, just that it doesn't error out.
>
> There is not much we can do about that, since our out-of-tree Makefile
> wrapper is never called.
>
> Even worse, if you do
> make -C buildroot O=somewhere defconfig
> make -C somewhere graph-depends
>
> then even though we do use our Makefile wrapper in this case, the
> --no-print-directory option is not used! So make would still print its
> "Entering/Leaving directory blabla" (and thus graph-depends will get
> confused.)
So why don't we just add --no-print-directory to the recursive make invocation
from the script? Patch follows...
>
>> Using any other combination of . and .. a $(O)
>> triggers the problem. So try
>>
>> do_prep br-7
>> make -C br-7 O=./br.build-7 defconfig
>> make -C br-7 O=./br.build-7 graph-depends
This one I didn't actually run like this, but like:
make O=br.build-7 defconfig
make O=br.build-7 graph-depends
(from the buildroot directory). For that one, I checked that the PDF was OK, and
then I just wrote it with -C in the mail. Stupid of me.
Regards,
Arnout
>
> OK, that's a use-case I was missing.
>
>> The graph-depends will fail with:
>>
>> tee: br.build-7/graphs/graph-depends.dot: No such file or directory
>> Getting targets
>> Getting dependencies for ['host-binutils', 'host-gmp', 'host-mpc', 'host-mpfr',
>> 'uclibc', 'host-fakeroot', 'host-gcc-final', 'host-makedevs',
>> 'toolchain-buildroot', 'toolchain', 'busybox', 'rootfs-tar']
>> Getting dependencies for ['host-m4', 'linux-headers', 'host-gcc-initial']
>> br.build-7/graphs/graph-depends.pdf: No such file or directory
>> Makefile:677: recipe for target 'graph-depends' failed
>> make: *** [graph-depends] Error 1
>
> OK, it fails here, too, but your patch does not change anything: it
> fails without your patch, and it fails with your patch applied.
>
> I'm using make-3.81, if that shall be a differentiator.
>
> Regards,
> Yann E. MORIN.
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-23 19:16 ` Arnout Vandecappelle
@ 2014-06-23 20:48 ` Yann E. MORIN
0 siblings, 0 replies; 11+ messages in thread
From: Yann E. MORIN @ 2014-06-23 20:48 UTC (permalink / raw)
To: buildroot
Arnout, All,
On 2014-06-23 21:16 +0200, Arnout Vandecappelle spake thusly:
> On 23/06/14 19:03, Yann E. MORIN wrote:
> > On 2014-06-23 07:28 +0200, Arnout Vandecappelle spake thusly:
> >> On 20/06/14 22:55, Yann E. MORIN wrote:
> >>> On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> >>>> The graph-depends commands cd into the CONFIG_DIR and run the script
> >>>> from there. However, this means that when $(O) is a relative path, it
> >>>> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
> >>>>
> >>>> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> >>> I tried with thisscript, and did not notice any difference between the
> >>> two runs, one with master, the second with the patch applied:
> > [--SNIP long script--]
> >> First of all, for me all these cases succeed both with and without the patch.
> >
> > You mean all the 6 cases do work for you? Weird.
> >
> > I don't see how it can work, since calling this
> > make -C buildroot O=somewhere goal
> >
> > will not have the --no-print-directory option, and thus make would print
> > its usual "Entering/Leaving directory blabla" which confuses
> > graph-depends.py
>
> Oh sorry, I didn't look at the output, just that it doesn't error out.
OK, no problem. ;-)
make does not error out, because of the pipe, which only returns the
status of the last command in the pipe. We can't do much about this...
> > There is not much we can do about that, since our out-of-tree Makefile
> > wrapper is never called.
> >
> > Even worse, if you do
> > make -C buildroot O=somewhere defconfig
> > make -C somewhere graph-depends
> >
> > then even though we do use our Makefile wrapper in this case, the
> > --no-print-directory option is not used! So make would still print its
> > "Entering/Leaving directory blabla" (and thus graph-depends will get
> > confused.)
>
> So why don't we just add --no-print-directory to the recursive make invocation
> from the script? Patch follows...
Thanks! :-)
> >> Using any other combination of . and .. a $(O)
> >> triggers the problem. So try
> >>
> >> do_prep br-7
> >> make -C br-7 O=./br.build-7 defconfig
> >> make -C br-7 O=./br.build-7 graph-depends
>
> This one I didn't actually run like this, but like:
>
> make O=br.build-7 defconfig
> make O=br.build-7 graph-depends
>
> (from the buildroot directory). For that one, I checked that the PDF was OK, and
> then I just wrote it with -C in the mail. Stupid of me.
Well, that's yet another test-case! :-)
OK, thanks for bearing with me all along! ;-)
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-20 20:04 ` Yann E. MORIN
2014-06-20 20:07 ` Arnout Vandecappelle
@ 2014-06-23 20:51 ` Yann E. MORIN
1 sibling, 0 replies; 11+ messages in thread
From: Yann E. MORIN @ 2014-06-23 20:51 UTC (permalink / raw)
To: buildroot
Arnout, All,
On 2014-06-20 22:04 +0200, Yann E. MORIN spake thusly:
> On 2014-06-19 00:10 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> > The graph-depends commands cd into the CONFIG_DIR and run the script
> > from there. However, this means that when $(O) is a relative path, it
> > will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
> >
> > Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
OK, these are still valid, but for other reasons!
Tested with the test-case by Arnout:
make O=my-output defconfig
make O=my-output graph-depends
plus another deviation from this test-case:
make -C buildroot O=my-output defconfig
make -C buildroot O=my-output graph-depends
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path
2014-06-18 22:10 [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path Arnout Vandecappelle
2014-06-20 20:04 ` Yann E. MORIN
2014-06-20 20:55 ` Yann E. MORIN
@ 2014-06-29 8:52 ` Thomas Petazzoni
2 siblings, 0 replies; 11+ messages in thread
From: Thomas Petazzoni @ 2014-06-29 8:52 UTC (permalink / raw)
To: buildroot
Dear Arnout Vandecappelle (Essensium/Mind),
On Thu, 19 Jun 2014 00:10:24 +0200, Arnout Vandecappelle
(Essensium/Mind) wrote:
> The graph-depends commands cd into the CONFIG_DIR and run the script
> from there. However, this means that when $(O) is a relative path, it
> will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> ---
> Makefile | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Applied, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2014-06-29 8:52 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-06-18 22:10 [Buildroot] [PATCH] graph-depends: fix when $(O) is a relative path Arnout Vandecappelle
2014-06-20 20:04 ` Yann E. MORIN
2014-06-20 20:07 ` Arnout Vandecappelle
2014-06-20 20:14 ` Yann E. MORIN
2014-06-23 20:51 ` Yann E. MORIN
2014-06-20 20:55 ` Yann E. MORIN
2014-06-23 5:28 ` Arnout Vandecappelle
2014-06-23 17:03 ` Yann E. MORIN
2014-06-23 19:16 ` Arnout Vandecappelle
2014-06-23 20:48 ` Yann E. MORIN
2014-06-29 8:52 ` Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.