Re: [PATCH] ARM: OMAP2+: l2c: squelch warning dump on power control setting

[Tony Lindgren <tony@atomide.com>]

* Tony Lindgren <tony@atomide.com> [140708 01:32]:
> * Sekhar Nori <nsekhar@ti.com> [140707 21:56]:
> > On Monday 07 July 2014 08:40 PM, Felipe Balbi wrote:
> > > On Mon, Jul 07, 2014 at 02:40:08PM +0100, Russell King - ARM Linux wrote:
> > >> --- a/arch/arm/mm/cache-l2x0.c
> > >> +++ b/arch/arm/mm/cache-l2x0.c
> > >> @@ -732,7 +732,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v
> > >>  
> > >>  static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
> > >>  {
> > >> -	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
> > >> +	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
> > >>  	bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9;
> > > 
> > > even with this change, l2c still tries to write to power control
> > > register, at least on AM437x. Looking a little deeper here, AM437x
> > > identifies itself as l2c PL310 r3p3, which should have power control
> > > register, but aparentely there's no way to write that register. I'll
> > > file a bug to our ROM team, but we will certainly need a way to
> > > workaround this inside omap4-common.c
> > 
> > Looks like we need both my patch as well as Russell's patch. I can
> > respin my patch with the pr_info_once() dropped if it helps further
> > reduce boot noise.
> 
> In that case I'm fine with the original patch in this series. Russell,
> got any better ideas?

I guess no more comments. Took a look at the patch again, Sekhar, can
you please update the description with what has been discovered in this
thread and repost?

Regards,

Tony