* [PATCH 00/10] add support for ack timeout estimation in ath9k driver
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
This patchset adds support for estimation of the ack timeout (dynack) in ath9k
driver. Ath9k dynack computes the ack timeout based on ack frame RX timestamp,
TX frame timestamp and frame duration.
Ath9k dynack has been tested in indoor environment using AR9223/AR9280 chipset
(running 3.16.0-rc5 kernel) and on 9Km PtoP link using AR9280 chipset
(running OpenWRT trunk, compat-wireless-2014-05-22)
Changes since RFCv2:
- disable dynack by default
- add ath9k_enable_dynack() method to enable ack timeout estimation algorithm
- remove dynack entry from ath9k debugfs
Changes since RFCv1:
- use ISC license instead of GPLv2 one
- use an inline method instead of a macro for EWMA calculation
- use powers of two weights in EWMA calculation
- fix typos
- add ath_dynack_node_init/ath_dynack_node_deinit methods
- use different logic to enable/disable dynack processing
Lorenzo Bianconi (10):
ath9k: export methods related to ack timeout estimation
ath9k: add duration field to ath_tx_status
ath9k: add dynamic ack timeout estimation
ath9k: add config for (en|dis)abling ack timeout estimation
ath9k: do not overwrite ack timeout estimation
ath9k: add sampling methods for (tx|rx) timestamp
ath9k: enable control frame reception
ath9k: add debugfs support for dynack
ath9k: add ath9k_enable_dynack() method
ath9k: initialize ath_node linked list
drivers/net/wireless/ath/ath.h | 2 +
drivers/net/wireless/ath/ath9k/Kconfig | 7 +
drivers/net/wireless/ath/ath9k/Makefile | 3 +
drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +
drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
drivers/net/wireless/ath/ath9k/debug.c | 28 +++
drivers/net/wireless/ath/ath9k/dynack.c | 345 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/dynack.h | 96 ++++++++
drivers/net/wireless/ath/ath9k/hw.c | 16 +-
drivers/net/wireless/ath/ath9k/hw.h | 7 +
drivers/net/wireless/ath/ath9k/mac.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 38 +++
drivers/net/wireless/ath/ath9k/recv.c | 7 +-
drivers/net/wireless/ath/ath9k/xmit.c | 5 +
15 files changed, 570 insertions(+), 4 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
--
1.9.1
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 00/10] add support for ack timeout estimation in ath9k driver
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
This patchset adds support for estimation of the ack timeout (dynack) in ath9k
driver. Ath9k dynack computes the ack timeout based on ack frame RX timestamp,
TX frame timestamp and frame duration.
Ath9k dynack has been tested in indoor environment using AR9223/AR9280 chipset
(running 3.16.0-rc5 kernel) and on 9Km PtoP link using AR9280 chipset
(running OpenWRT trunk, compat-wireless-2014-05-22)
Changes since RFCv2:
- disable dynack by default
- add ath9k_enable_dynack() method to enable ack timeout estimation algorithm
- remove dynack entry from ath9k debugfs
Changes since RFCv1:
- use ISC license instead of GPLv2 one
- use an inline method instead of a macro for EWMA calculation
- use powers of two weights in EWMA calculation
- fix typos
- add ath_dynack_node_init/ath_dynack_node_deinit methods
- use different logic to enable/disable dynack processing
Lorenzo Bianconi (10):
ath9k: export methods related to ack timeout estimation
ath9k: add duration field to ath_tx_status
ath9k: add dynamic ack timeout estimation
ath9k: add config for (en|dis)abling ack timeout estimation
ath9k: do not overwrite ack timeout estimation
ath9k: add sampling methods for (tx|rx) timestamp
ath9k: enable control frame reception
ath9k: add debugfs support for dynack
ath9k: add ath9k_enable_dynack() method
ath9k: initialize ath_node linked list
drivers/net/wireless/ath/ath.h | 2 +
drivers/net/wireless/ath/ath9k/Kconfig | 7 +
drivers/net/wireless/ath/ath9k/Makefile | 3 +
drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +
drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
drivers/net/wireless/ath/ath9k/debug.c | 28 +++
drivers/net/wireless/ath/ath9k/dynack.c | 345 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/dynack.h | 96 ++++++++
drivers/net/wireless/ath/ath9k/hw.c | 16 +-
drivers/net/wireless/ath/ath9k/hw.h | 7 +
drivers/net/wireless/ath/ath9k/mac.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 38 +++
drivers/net/wireless/ath/ath9k/recv.c | 7 +-
drivers/net/wireless/ath/ath9k/xmit.c | 5 +
15 files changed, 570 insertions(+), 4 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
--
1.9.1
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 01/10] ath9k: export methods related to ack timeout estimation
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Remove static keyword and export ath9k_hw_setslottime(),
ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These
methods will be used in dynamic ack timeout estimation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 6 +++---
drivers/net/wireless/ath/ath9k/hw.h | 4 ++++
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index fd0158f..e88896c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -935,21 +935,21 @@ static void ath9k_hw_set_sifs_time(struct ath_hw *ah, u32 us)
REG_WRITE(ah, AR_D_GBL_IFS_SIFS, val);
}
-static void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) 0xFFFF);
REG_WRITE(ah, AR_D_GBL_IFS_SLOT, val);
}
-static void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_ACK));
REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_ACK, val);
}
-static void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_CTS));
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 51b4ebe..f36d971 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1080,6 +1080,10 @@ void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
+
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
{
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 01/10] ath9k: export methods related to ack timeout estimation
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Remove static keyword and export ath9k_hw_setslottime(),
ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These
methods will be used in dynamic ack timeout estimation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 6 +++---
drivers/net/wireless/ath/ath9k/hw.h | 4 ++++
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index fd0158f..e88896c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -935,21 +935,21 @@ static void ath9k_hw_set_sifs_time(struct ath_hw *ah, u32 us)
REG_WRITE(ah, AR_D_GBL_IFS_SIFS, val);
}
-static void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) 0xFFFF);
REG_WRITE(ah, AR_D_GBL_IFS_SLOT, val);
}
-static void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_ACK));
REG_RMW_FIELD(ah, AR_TIME_OUT, AR_TIME_OUT_ACK, val);
}
-static void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
{
u32 val = ath9k_hw_mac_to_clks(ah, us);
val = min(val, (u32) MS(0xFFFFFFFF, AR_TIME_OUT_CTS));
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 51b4ebe..f36d971 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1080,6 +1080,10 @@ void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us);
+void ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
+
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
{
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 02/10] ath9k: add duration field to ath_tx_status
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Add duration field to ath_tx_status in order to report frame duration for each
entry in multi-retry chain. These fields will be used in dynamic ack timeout
processing
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +++++++
drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +++++++++
drivers/net/wireless/ath/ath9k/mac.h | 1 +
3 files changed, 17 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index 59af9f9..669cb37 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -381,6 +381,13 @@ static int ar9002_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->evm1 = ads->AR_TxEVM1;
ts->evm2 = ads->AR_TxEVM2;
+ status = ACCESS_ONCE(ads->ds_ctl4);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(ads->ds_ctl5);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 71e38e8..e5f7c11 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -355,9 +355,11 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
struct ath_tx_status *ts)
{
struct ar9003_txs *ads;
+ struct ar9003_txc *adc;
u32 status;
ads = &ah->ts_ring[ah->ts_tail];
+ adc = (struct ar9003_txc *)ads;
status = ACCESS_ONCE(ads->status8);
if ((status & AR_TxDone) == 0)
@@ -426,6 +428,13 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->ts_rssi_ext1 = MS(status, AR_TxRSSIAnt11);
ts->ts_rssi_ext2 = MS(status, AR_TxRSSIAnt12);
+ status = ACCESS_ONCE(adc->ctl15);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(adc->ctl16);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
memset(ads, 0, sizeof(*ads));
return 0;
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 6c56caf..cd05a77 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -121,6 +121,7 @@ struct ath_tx_status {
u32 evm0;
u32 evm1;
u32 evm2;
+ u32 duration[4];
};
struct ath_rx_status {
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 02/10] ath9k: add duration field to ath_tx_status
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Add duration field to ath_tx_status in order to report frame duration for each
entry in multi-retry chain. These fields will be used in dynamic ack timeout
processing
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +++++++
drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +++++++++
drivers/net/wireless/ath/ath9k/mac.h | 1 +
3 files changed, 17 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index 59af9f9..669cb37 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -381,6 +381,13 @@ static int ar9002_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->evm1 = ads->AR_TxEVM1;
ts->evm2 = ads->AR_TxEVM2;
+ status = ACCESS_ONCE(ads->ds_ctl4);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(ads->ds_ctl5);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 71e38e8..e5f7c11 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -355,9 +355,11 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
struct ath_tx_status *ts)
{
struct ar9003_txs *ads;
+ struct ar9003_txc *adc;
u32 status;
ads = &ah->ts_ring[ah->ts_tail];
+ adc = (struct ar9003_txc *)ads;
status = ACCESS_ONCE(ads->status8);
if ((status & AR_TxDone) == 0)
@@ -426,6 +428,13 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
ts->ts_rssi_ext1 = MS(status, AR_TxRSSIAnt11);
ts->ts_rssi_ext2 = MS(status, AR_TxRSSIAnt12);
+ status = ACCESS_ONCE(adc->ctl15);
+ ts->duration[0] = MS(status, AR_PacketDur0);
+ ts->duration[1] = MS(status, AR_PacketDur1);
+ status = ACCESS_ONCE(adc->ctl16);
+ ts->duration[2] = MS(status, AR_PacketDur2);
+ ts->duration[3] = MS(status, AR_PacketDur3);
+
memset(ads, 0, sizeof(*ads));
return 0;
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 6c56caf..cd05a77 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -121,6 +121,7 @@ struct ath_tx_status {
u32 evm0;
u32 evm1;
u32 evm2;
+ u32 duration[4];
};
struct ath_rx_status {
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 03/10] ath9k: add dynamic ack timeout estimation
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Add dynamic ack timeout estimation algorithm based on ack frame RX timestamp,
TX frame timestamp and frame duration.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Tested-by: Philippe Duchein <wireless-dev@duchein.net>
---
drivers/net/wireless/ath/ath.h | 2 +
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
drivers/net/wireless/ath/ath9k/dynack.c | 345 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/dynack.h | 96 +++++++++
drivers/net/wireless/ath/ath9k/hw.c | 2 +
drivers/net/wireless/ath/ath9k/hw.h | 3 +
6 files changed, 451 insertions(+)
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index fd9e530..4e51072 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -234,6 +234,7 @@ void ath_printk(const char *level, const struct ath_common *common,
* AR9462.
* @ATH_DBG_DFS: radar datection
* @ATH_DBG_WOW: Wake on Wireless
+ * @ATH_DBG_DYNACK: dynack handling
* @ATH_DBG_ANY: enable all debugging
*
* The debug level is used to control the amount and type of debugging output
@@ -261,6 +262,7 @@ enum ATH_DEBUG {
ATH_DBG_MCI = 0x00008000,
ATH_DBG_DFS = 0x00010000,
ATH_DBG_WOW = 0x00020000,
+ ATH_DBG_DYNACK = 0x00040000,
ATH_DBG_ANY = 0xffffffff
};
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 7fc13a8..8f2c44d 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -273,6 +273,9 @@ struct ath_node {
struct ath_rx_rate_stats rx_rate_stats;
#endif
u8 key_idx[4];
+
+ u32 ackto;
+ struct list_head list;
};
struct ath_tx_control {
diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
new file mode 100644
index 0000000..b4fbe34
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+#include "hw.h"
+#include "dynack.h"
+
+#define COMPUTE_TO (5 * HZ)
+#define LATEACK_DELAY (10 * HZ)
+#define LATEACK_TO 256
+#define MAX_DELAY 300
+#define EWMA_LEVEL 96
+#define EWMA_DIV 128
+
+/**
+ * ath_dynack_ewma - EWMA (Exponentially Weighted Moving Average) calculation
+ *
+ */
+static inline u32 ath_dynack_ewma(u32 old, u32 new)
+{
+ return (new * (EWMA_DIV - EWMA_LEVEL) + old * EWMA_LEVEL) / EWMA_DIV;
+}
+
+/**
+ * ath_dynack_get_sifs - get sifs time based on phy used
+ * @ah: ath hw
+ * @phy: phy used
+ *
+ */
+static inline u32 ath_dynack_get_sifs(struct ath_hw *ah, int phy)
+{
+ u32 sifs = CCK_SIFS_TIME;
+
+ if (phy == WLAN_RC_PHY_OFDM) {
+ if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_QUARTER;
+ else if (IS_CHAN_HALF_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_HALF;
+ else
+ sifs = OFDM_SIFS_TIME;
+ }
+ return sifs;
+}
+
+static inline bool ath_dynack_bssidmask(struct ath_hw *ah, const u8 *mac)
+{
+ int i;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ if ((common->macaddr[i] & common->bssidmask[i]) !=
+ (mac[i] & common->bssidmask[i]))
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * ath_dynack_compute_ackto - compute ack timeout based on sta timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_ackto(struct ath_hw *ah)
+{
+ struct ath_node *an;
+ u32 to = 0;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ list_for_each_entry(an, &da->nodes, list)
+ if (an->ackto > to)
+ to = an->ackto;
+
+ if (to && da->ackto != to) {
+ u32 slottime;
+
+ slottime = (to - 3) / 2;
+ da->ackto = to;
+ ath_dbg(common, DYNACK, "ack timeout %u slottime %u\n",
+ da->ackto, slottime);
+ ath9k_hw_setslottime(ah, slottime);
+ ath9k_hw_set_ack_timeout(ah, da->ackto);
+ ath9k_hw_set_cts_timeout(ah, da->ackto);
+ }
+}
+
+/**
+ * ath_dynack_compute_to - compute ack timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_to(struct ath_hw *ah)
+{
+ u32 ackto, ack_ts;
+ u8 *dst, *src;
+ struct ieee80211_sta *sta;
+ struct ath_node *an;
+ struct ts_info *st_ts;
+ struct ath_dynack *da = &ah->dynack;
+
+ rcu_read_lock();
+
+ while (da->st_rbf.h_rb != da->st_rbf.t_rb &&
+ da->ack_rbf.h_rb != da->ack_rbf.t_rb) {
+ ack_ts = da->ack_rbf.tstamp[da->ack_rbf.h_rb];
+ st_ts = &da->st_rbf.ts[da->st_rbf.h_rb];
+ dst = da->st_rbf.addr[da->st_rbf.h_rb].h_dest;
+ src = da->st_rbf.addr[da->st_rbf.h_rb].h_src;
+
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "ack_ts %u st_ts %u st_dur %u [%u-%u]\n",
+ ack_ts, st_ts->tstamp, st_ts->dur,
+ da->ack_rbf.h_rb, da->st_rbf.h_rb);
+
+ if (ack_ts > st_ts->tstamp + st_ts->dur) {
+ ackto = ack_ts - st_ts->tstamp - st_ts->dur;
+
+ if (ackto < MAX_DELAY) {
+ sta = ieee80211_find_sta_by_ifaddr(ah->hw, dst,
+ src);
+ if (sta) {
+ an = (struct ath_node *)sta->drv_priv;
+ an->ackto = ath_dynack_ewma(an->ackto,
+ ackto);
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "%pM to %u\n", dst, an->ackto);
+ if (time_is_before_jiffies(da->lto)) {
+ ath_dynack_compute_ackto(ah);
+ da->lto = jiffies + COMPUTE_TO;
+ }
+ }
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+ } else {
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ }
+
+ rcu_read_unlock();
+}
+
+/**
+ * ath_dynack_sample_tx_ts - status ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: tx status info
+ *
+ */
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts)
+{
+ u8 ridx;
+ struct ieee80211_hdr *hdr;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ if ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+
+ /* late ack */
+ if (ts->ts_status & ATH9K_TXERR_XRETRY) {
+ if (ieee80211_is_assoc_req(hdr->frame_control) ||
+ ieee80211_is_assoc_resp(hdr->frame_control)) {
+ ath_dbg(common, DYNACK, "late ack\n");
+ ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
+ ath9k_hw_set_cts_timeout(ah, LATEACK_TO);
+ da->lto = jiffies + LATEACK_DELAY;
+ }
+
+ spin_unlock_bh(&da->qlock);
+ return;
+ }
+
+ ridx = ts->ts_rateindex;
+
+ da->st_rbf.ts[da->st_rbf.t_rb].tstamp = ts->ts_tstamp;
+ da->st_rbf.ts[da->st_rbf.t_rb].dur = ts->duration[ts->ts_rateindex];
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_dest, hdr->addr1);
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_src, hdr->addr2);
+
+ if (!(info->status.rates[ridx].flags & IEEE80211_TX_RC_MCS)) {
+ u32 phy, sifs;
+ const struct ieee80211_rate *rate;
+ struct ieee80211_tx_rate *rates = info->status.rates;
+
+ rate = &common->sbands[info->band].bitrates[rates[ridx].idx];
+ if (info->band == IEEE80211_BAND_2GHZ &&
+ !(rate->flags & IEEE80211_RATE_ERP_G))
+ phy = WLAN_RC_PHY_CCK;
+ else
+ phy = WLAN_RC_PHY_OFDM;
+
+ sifs = ath_dynack_get_sifs(ah, phy);
+ da->st_rbf.ts[da->st_rbf.t_rb].dur -= sifs;
+ }
+
+ ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
+ hdr->addr1, da->st_rbf.ts[da->st_rbf.t_rb].tstamp,
+ da->st_rbf.ts[da->st_rbf.t_rb].dur, da->st_rbf.h_rb,
+ (da->st_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->st_rbf.t_rb, ATH_DYN_BUF);
+ if (da->st_rbf.t_rb == da->st_rbf.h_rb)
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_tx_ts);
+
+/**
+ * ath_dynack_sample_ack_ts - ack ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: rx timestamp
+ *
+ */
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb,
+ u32 ts)
+{
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+ if (!ath_dynack_bssidmask(ah, hdr->addr1) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb] = ts;
+
+ ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb],
+ da->ack_rbf.h_rb, (da->ack_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->ack_rbf.t_rb, ATH_DYN_BUF);
+ if (da->ack_rbf.t_rb == da->ack_rbf.h_rb)
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_ack_ts);
+
+/**
+ * ath_dynack_node_init - init ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ an->ackto = ackto;
+
+ spin_lock(&da->qlock);
+ list_add_tail(&an->list, &da->nodes);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_init);
+
+/**
+ * ath_dynack_node_deinit - deinit ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ spin_lock(&da->qlock);
+ list_del(&an->list);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_deinit);
+
+/**
+ * ath_dynack_reset - reset dynack processing
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_reset(struct ath_hw *ah)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ da->lto = jiffies;
+ da->ackto = ackto;
+
+ da->st_rbf.t_rb = 0;
+ da->st_rbf.h_rb = 0;
+ da->ack_rbf.t_rb = 0;
+ da->ack_rbf.h_rb = 0;
+
+ /* init acktimeout */
+ ath9k_hw_setslottime(ah, (ackto - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, ackto);
+ ath9k_hw_set_cts_timeout(ah, ackto);
+}
+EXPORT_SYMBOL(ath_dynack_reset);
+
+/**
+ * ath_dynack_init - init dynack data structure
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_init(struct ath_hw *ah)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ memset(da, 0, sizeof(struct ath_dynack));
+
+ spin_lock_init(&da->qlock);
+ INIT_LIST_HEAD(&da->nodes);
+}
+
diff --git a/drivers/net/wireless/ath/ath9k/dynack.h b/drivers/net/wireless/ath/ath9k/dynack.h
new file mode 100644
index 0000000..b1a03fa
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef DYNACK_H
+#define DYNACK_H
+
+#define ATH_DYN_BUF 64
+
+struct ath_hw;
+struct ath_node;
+
+/**
+ * ath_dyn_rxbuf - ack frame ring buffer
+ */
+struct ath_dyn_rxbuf {
+ u16 h_rb, t_rb;
+ u32 tstamp[ATH_DYN_BUF];
+};
+
+struct ts_info {
+ u32 tstamp;
+ u32 dur;
+};
+
+struct haddr_pair {
+ u8 h_dest[ETH_ALEN];
+ u8 h_src[ETH_ALEN];
+};
+/**
+ * ath_dyn_txbuf - tx frame ring buffer
+ */
+struct ath_dyn_txbuf {
+ u16 h_rb, t_rb;
+ struct haddr_pair addr[ATH_DYN_BUF];
+ struct ts_info ts[ATH_DYN_BUF];
+};
+
+/**
+ * ath_dynack - dyn ack processing info
+ * @enabled: enable dyn ack processing
+ * @ackto: current ack timeout
+ * @lto: last ack timeout computation
+ * @nodes: ath_node linked list
+ * @qlock: ts queue spinlock
+ * @ack_rbf: ack ts ring buffer
+ * @st_rbf: status ts ring buffer
+ */
+struct ath_dynack {
+ bool enabled;
+ int ackto;
+ unsigned long lto;
+
+ struct list_head nodes;
+
+ /* protect timestamp queue access */
+ spinlock_t qlock;
+ struct ath_dyn_rxbuf ack_rbf;
+ struct ath_dyn_txbuf st_rbf;
+};
+
+#if defined(CONFIG_ATH9K_DYNACK)
+void ath_dynack_reset(struct ath_hw *ah);
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_init(struct ath_hw *ah);
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb, u32 ts);
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts);
+#else
+static inline void ath_dynack_init(struct ath_hw *ah) {}
+static inline void ath_dynack_reset(struct ath_hw *ah) {}
+static inline void ath_dynack_node_init(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_node_deinit(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_sample_ack_ts(struct ath_hw *ah,
+ struct sk_buff *skb, u32 ts) {}
+static inline void ath_dynack_sample_tx_ts(struct ath_hw *ah,
+ struct sk_buff *skb,
+ struct ath_tx_status *ts) {}
+#endif
+
+#endif /* DYNACK_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e88896c..9a6b113 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -647,6 +647,8 @@ int ath9k_hw_init(struct ath_hw *ah)
return ret;
}
+ ath_dynack_init(ah);
+
return 0;
}
EXPORT_SYMBOL(ath9k_hw_init);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index f36d971..b9eef33 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -29,6 +29,7 @@
#include "reg.h"
#include "phy.h"
#include "btcoex.h"
+#include "dynack.h"
#include "../regd.h"
@@ -924,6 +925,8 @@ struct ath_hw {
int (*external_reset)(void);
const struct firmware *eeprom_blob;
+
+ struct ath_dynack dynack;
};
struct ath_bus_ops {
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 03/10] ath9k: add dynamic ack timeout estimation
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Add dynamic ack timeout estimation algorithm based on ack frame RX timestamp,
TX frame timestamp and frame duration.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Tested-by: Philippe Duchein <wireless-dev@duchein.net>
---
drivers/net/wireless/ath/ath.h | 2 +
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
drivers/net/wireless/ath/ath9k/dynack.c | 345 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/dynack.h | 96 +++++++++
drivers/net/wireless/ath/ath9k/hw.c | 2 +
drivers/net/wireless/ath/ath9k/hw.h | 3 +
6 files changed, 451 insertions(+)
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index fd9e530..4e51072 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -234,6 +234,7 @@ void ath_printk(const char *level, const struct ath_common *common,
* AR9462.
* @ATH_DBG_DFS: radar datection
* @ATH_DBG_WOW: Wake on Wireless
+ * @ATH_DBG_DYNACK: dynack handling
* @ATH_DBG_ANY: enable all debugging
*
* The debug level is used to control the amount and type of debugging output
@@ -261,6 +262,7 @@ enum ATH_DEBUG {
ATH_DBG_MCI = 0x00008000,
ATH_DBG_DFS = 0x00010000,
ATH_DBG_WOW = 0x00020000,
+ ATH_DBG_DYNACK = 0x00040000,
ATH_DBG_ANY = 0xffffffff
};
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 7fc13a8..8f2c44d 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -273,6 +273,9 @@ struct ath_node {
struct ath_rx_rate_stats rx_rate_stats;
#endif
u8 key_idx[4];
+
+ u32 ackto;
+ struct list_head list;
};
struct ath_tx_control {
diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
new file mode 100644
index 0000000..b4fbe34
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+#include "hw.h"
+#include "dynack.h"
+
+#define COMPUTE_TO (5 * HZ)
+#define LATEACK_DELAY (10 * HZ)
+#define LATEACK_TO 256
+#define MAX_DELAY 300
+#define EWMA_LEVEL 96
+#define EWMA_DIV 128
+
+/**
+ * ath_dynack_ewma - EWMA (Exponentially Weighted Moving Average) calculation
+ *
+ */
+static inline u32 ath_dynack_ewma(u32 old, u32 new)
+{
+ return (new * (EWMA_DIV - EWMA_LEVEL) + old * EWMA_LEVEL) / EWMA_DIV;
+}
+
+/**
+ * ath_dynack_get_sifs - get sifs time based on phy used
+ * @ah: ath hw
+ * @phy: phy used
+ *
+ */
+static inline u32 ath_dynack_get_sifs(struct ath_hw *ah, int phy)
+{
+ u32 sifs = CCK_SIFS_TIME;
+
+ if (phy == WLAN_RC_PHY_OFDM) {
+ if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_QUARTER;
+ else if (IS_CHAN_HALF_RATE(ah->curchan))
+ sifs = OFDM_SIFS_TIME_HALF;
+ else
+ sifs = OFDM_SIFS_TIME;
+ }
+ return sifs;
+}
+
+static inline bool ath_dynack_bssidmask(struct ath_hw *ah, const u8 *mac)
+{
+ int i;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ if ((common->macaddr[i] & common->bssidmask[i]) !=
+ (mac[i] & common->bssidmask[i]))
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * ath_dynack_compute_ackto - compute ack timeout based on sta timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_ackto(struct ath_hw *ah)
+{
+ struct ath_node *an;
+ u32 to = 0;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ list_for_each_entry(an, &da->nodes, list)
+ if (an->ackto > to)
+ to = an->ackto;
+
+ if (to && da->ackto != to) {
+ u32 slottime;
+
+ slottime = (to - 3) / 2;
+ da->ackto = to;
+ ath_dbg(common, DYNACK, "ack timeout %u slottime %u\n",
+ da->ackto, slottime);
+ ath9k_hw_setslottime(ah, slottime);
+ ath9k_hw_set_ack_timeout(ah, da->ackto);
+ ath9k_hw_set_cts_timeout(ah, da->ackto);
+ }
+}
+
+/**
+ * ath_dynack_compute_to - compute ack timeout
+ * @ah: ath hw
+ *
+ * should be called while holding qlock
+ */
+static void ath_dynack_compute_to(struct ath_hw *ah)
+{
+ u32 ackto, ack_ts;
+ u8 *dst, *src;
+ struct ieee80211_sta *sta;
+ struct ath_node *an;
+ struct ts_info *st_ts;
+ struct ath_dynack *da = &ah->dynack;
+
+ rcu_read_lock();
+
+ while (da->st_rbf.h_rb != da->st_rbf.t_rb &&
+ da->ack_rbf.h_rb != da->ack_rbf.t_rb) {
+ ack_ts = da->ack_rbf.tstamp[da->ack_rbf.h_rb];
+ st_ts = &da->st_rbf.ts[da->st_rbf.h_rb];
+ dst = da->st_rbf.addr[da->st_rbf.h_rb].h_dest;
+ src = da->st_rbf.addr[da->st_rbf.h_rb].h_src;
+
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "ack_ts %u st_ts %u st_dur %u [%u-%u]\n",
+ ack_ts, st_ts->tstamp, st_ts->dur,
+ da->ack_rbf.h_rb, da->st_rbf.h_rb);
+
+ if (ack_ts > st_ts->tstamp + st_ts->dur) {
+ ackto = ack_ts - st_ts->tstamp - st_ts->dur;
+
+ if (ackto < MAX_DELAY) {
+ sta = ieee80211_find_sta_by_ifaddr(ah->hw, dst,
+ src);
+ if (sta) {
+ an = (struct ath_node *)sta->drv_priv;
+ an->ackto = ath_dynack_ewma(an->ackto,
+ ackto);
+ ath_dbg(ath9k_hw_common(ah), DYNACK,
+ "%pM to %u\n", dst, an->ackto);
+ if (time_is_before_jiffies(da->lto)) {
+ ath_dynack_compute_ackto(ah);
+ da->lto = jiffies + COMPUTE_TO;
+ }
+ }
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+ } else {
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+ }
+ }
+
+ rcu_read_unlock();
+}
+
+/**
+ * ath_dynack_sample_tx_ts - status ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: tx status info
+ *
+ */
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts)
+{
+ u8 ridx;
+ struct ieee80211_hdr *hdr;
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ if ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+
+ /* late ack */
+ if (ts->ts_status & ATH9K_TXERR_XRETRY) {
+ if (ieee80211_is_assoc_req(hdr->frame_control) ||
+ ieee80211_is_assoc_resp(hdr->frame_control)) {
+ ath_dbg(common, DYNACK, "late ack\n");
+ ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
+ ath9k_hw_set_cts_timeout(ah, LATEACK_TO);
+ da->lto = jiffies + LATEACK_DELAY;
+ }
+
+ spin_unlock_bh(&da->qlock);
+ return;
+ }
+
+ ridx = ts->ts_rateindex;
+
+ da->st_rbf.ts[da->st_rbf.t_rb].tstamp = ts->ts_tstamp;
+ da->st_rbf.ts[da->st_rbf.t_rb].dur = ts->duration[ts->ts_rateindex];
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_dest, hdr->addr1);
+ ether_addr_copy(da->st_rbf.addr[da->st_rbf.t_rb].h_src, hdr->addr2);
+
+ if (!(info->status.rates[ridx].flags & IEEE80211_TX_RC_MCS)) {
+ u32 phy, sifs;
+ const struct ieee80211_rate *rate;
+ struct ieee80211_tx_rate *rates = info->status.rates;
+
+ rate = &common->sbands[info->band].bitrates[rates[ridx].idx];
+ if (info->band == IEEE80211_BAND_2GHZ &&
+ !(rate->flags & IEEE80211_RATE_ERP_G))
+ phy = WLAN_RC_PHY_CCK;
+ else
+ phy = WLAN_RC_PHY_OFDM;
+
+ sifs = ath_dynack_get_sifs(ah, phy);
+ da->st_rbf.ts[da->st_rbf.t_rb].dur -= sifs;
+ }
+
+ ath_dbg(common, DYNACK, "{%pM} tx sample %u [dur %u][h %u-t %u]\n",
+ hdr->addr1, da->st_rbf.ts[da->st_rbf.t_rb].tstamp,
+ da->st_rbf.ts[da->st_rbf.t_rb].dur, da->st_rbf.h_rb,
+ (da->st_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->st_rbf.t_rb, ATH_DYN_BUF);
+ if (da->st_rbf.t_rb == da->st_rbf.h_rb)
+ INCR(da->st_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_tx_ts);
+
+/**
+ * ath_dynack_sample_ack_ts - ack ts sampling method
+ * @ah: ath hw
+ * @skb: socket buffer
+ * @ts: rx timestamp
+ *
+ */
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb,
+ u32 ts)
+{
+ struct ath_dynack *da = &ah->dynack;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+ if (!ath_dynack_bssidmask(ah, hdr->addr1) || !da->enabled)
+ return;
+
+ spin_lock_bh(&da->qlock);
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb] = ts;
+
+ ath_dbg(common, DYNACK, "rx sample %u [h %u-t %u]\n",
+ da->ack_rbf.tstamp[da->ack_rbf.t_rb],
+ da->ack_rbf.h_rb, (da->ack_rbf.t_rb + 1) % ATH_DYN_BUF);
+
+ INCR(da->ack_rbf.t_rb, ATH_DYN_BUF);
+ if (da->ack_rbf.t_rb == da->ack_rbf.h_rb)
+ INCR(da->ack_rbf.h_rb, ATH_DYN_BUF);
+
+ ath_dynack_compute_to(ah);
+
+ spin_unlock_bh(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_sample_ack_ts);
+
+/**
+ * ath_dynack_node_init - init ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ an->ackto = ackto;
+
+ spin_lock(&da->qlock);
+ list_add_tail(&an->list, &da->nodes);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_init);
+
+/**
+ * ath_dynack_node_deinit - deinit ath_node related info
+ * @ah: ath hw
+ * @an: ath node
+ *
+ */
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ spin_lock(&da->qlock);
+ list_del(&an->list);
+ spin_unlock(&da->qlock);
+}
+EXPORT_SYMBOL(ath_dynack_node_deinit);
+
+/**
+ * ath_dynack_reset - reset dynack processing
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_reset(struct ath_hw *ah)
+{
+ /* ackto = slottime + sifs + air delay */
+ u32 ackto = ATH9K_SLOT_TIME_9 + 16 + 64;
+ struct ath_dynack *da = &ah->dynack;
+
+ da->lto = jiffies;
+ da->ackto = ackto;
+
+ da->st_rbf.t_rb = 0;
+ da->st_rbf.h_rb = 0;
+ da->ack_rbf.t_rb = 0;
+ da->ack_rbf.h_rb = 0;
+
+ /* init acktimeout */
+ ath9k_hw_setslottime(ah, (ackto - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, ackto);
+ ath9k_hw_set_cts_timeout(ah, ackto);
+}
+EXPORT_SYMBOL(ath_dynack_reset);
+
+/**
+ * ath_dynack_init - init dynack data structure
+ * @ah: ath hw
+ *
+ */
+void ath_dynack_init(struct ath_hw *ah)
+{
+ struct ath_dynack *da = &ah->dynack;
+
+ memset(da, 0, sizeof(struct ath_dynack));
+
+ spin_lock_init(&da->qlock);
+ INIT_LIST_HEAD(&da->nodes);
+}
+
diff --git a/drivers/net/wireless/ath/ath9k/dynack.h b/drivers/net/wireless/ath/ath9k/dynack.h
new file mode 100644
index 0000000..b1a03fa
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dynack.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2014, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef DYNACK_H
+#define DYNACK_H
+
+#define ATH_DYN_BUF 64
+
+struct ath_hw;
+struct ath_node;
+
+/**
+ * ath_dyn_rxbuf - ack frame ring buffer
+ */
+struct ath_dyn_rxbuf {
+ u16 h_rb, t_rb;
+ u32 tstamp[ATH_DYN_BUF];
+};
+
+struct ts_info {
+ u32 tstamp;
+ u32 dur;
+};
+
+struct haddr_pair {
+ u8 h_dest[ETH_ALEN];
+ u8 h_src[ETH_ALEN];
+};
+/**
+ * ath_dyn_txbuf - tx frame ring buffer
+ */
+struct ath_dyn_txbuf {
+ u16 h_rb, t_rb;
+ struct haddr_pair addr[ATH_DYN_BUF];
+ struct ts_info ts[ATH_DYN_BUF];
+};
+
+/**
+ * ath_dynack - dyn ack processing info
+ * @enabled: enable dyn ack processing
+ * @ackto: current ack timeout
+ * @lto: last ack timeout computation
+ * @nodes: ath_node linked list
+ * @qlock: ts queue spinlock
+ * @ack_rbf: ack ts ring buffer
+ * @st_rbf: status ts ring buffer
+ */
+struct ath_dynack {
+ bool enabled;
+ int ackto;
+ unsigned long lto;
+
+ struct list_head nodes;
+
+ /* protect timestamp queue access */
+ spinlock_t qlock;
+ struct ath_dyn_rxbuf ack_rbf;
+ struct ath_dyn_txbuf st_rbf;
+};
+
+#if defined(CONFIG_ATH9K_DYNACK)
+void ath_dynack_reset(struct ath_hw *ah);
+void ath_dynack_node_init(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_node_deinit(struct ath_hw *ah, struct ath_node *an);
+void ath_dynack_init(struct ath_hw *ah);
+void ath_dynack_sample_ack_ts(struct ath_hw *ah, struct sk_buff *skb, u32 ts);
+void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ struct ath_tx_status *ts);
+#else
+static inline void ath_dynack_init(struct ath_hw *ah) {}
+static inline void ath_dynack_reset(struct ath_hw *ah) {}
+static inline void ath_dynack_node_init(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_node_deinit(struct ath_hw *ah,
+ struct ath_node *an) {}
+static inline void ath_dynack_sample_ack_ts(struct ath_hw *ah,
+ struct sk_buff *skb, u32 ts) {}
+static inline void ath_dynack_sample_tx_ts(struct ath_hw *ah,
+ struct sk_buff *skb,
+ struct ath_tx_status *ts) {}
+#endif
+
+#endif /* DYNACK_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e88896c..9a6b113 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -647,6 +647,8 @@ int ath9k_hw_init(struct ath_hw *ah)
return ret;
}
+ ath_dynack_init(ah);
+
return 0;
}
EXPORT_SYMBOL(ath9k_hw_init);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index f36d971..b9eef33 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -29,6 +29,7 @@
#include "reg.h"
#include "phy.h"
#include "btcoex.h"
+#include "dynack.h"
#include "../regd.h"
@@ -924,6 +925,8 @@ struct ath_hw {
int (*external_reset)(void);
const struct firmware *eeprom_blob;
+
+ struct ath_dynack dynack;
};
struct ath_bus_ops {
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 04/10] ath9k: add config for (en|dis)abling ack timeout estimation
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Add ack timeout estimation to ath9k Makefile
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/Kconfig | 7 +++++++
drivers/net/wireless/ath/ath9k/Makefile | 3 +++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 8fcc029..ee61a4c 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -151,3 +151,10 @@ config ATH9K_HTC_DEBUGFS
depends on ATH9K_HTC && DEBUG_FS
---help---
Say Y, if you need access to ath9k_htc's statistics.
+
+config ATH9K_DYNACK
+ bool "Atheros ath9k ack timeout estimation algorithm (EXPERIMENTAL)"
+ depends on ATH9K
+ default n
+ ---help---
+ This option enables ath9k dynamic ack timeout estimation algorithm
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 6b4020a..73704c1 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -49,6 +49,9 @@ ath9k_hw-$(CONFIG_ATH9K_WOW) += ar9003_wow.o
ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
+
+ath9k_hw-$(CONFIG_ATH9K_DYNACK) += dynack.o
+
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 04/10] ath9k: add config for (en|dis)abling ack timeout estimation
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Add ack timeout estimation to ath9k Makefile
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/Kconfig | 7 +++++++
drivers/net/wireless/ath/ath9k/Makefile | 3 +++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 8fcc029..ee61a4c 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -151,3 +151,10 @@ config ATH9K_HTC_DEBUGFS
depends on ATH9K_HTC && DEBUG_FS
---help---
Say Y, if you need access to ath9k_htc's statistics.
+
+config ATH9K_DYNACK
+ bool "Atheros ath9k ack timeout estimation algorithm (EXPERIMENTAL)"
+ depends on ATH9K
+ default n
+ ---help---
+ This option enables ath9k dynamic ack timeout estimation algorithm
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 6b4020a..73704c1 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -49,6 +49,9 @@ ath9k_hw-$(CONFIG_ATH9K_WOW) += ar9003_wow.o
ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
+
+ath9k_hw-$(CONFIG_ATH9K_DYNACK) += dynack.o
+
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 05/10] ath9k: do not overwrite ack timeout estimation
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Do not overwrite ack timeout estimation in ath9k_hw_init_global_settings() if
dynack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 9a6b113..b2ca47a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1055,6 +1055,14 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
ctstimeout += 48 - sifstime - ah->slottime;
}
+ if (ah->dynack.enabled) {
+ acktimeout = ah->dynack.ackto;
+ ctstimeout = acktimeout;
+ slottime = (acktimeout - 3) / 2;
+ } else {
+ ah->dynack.ackto = acktimeout;
+ }
+
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 05/10] ath9k: do not overwrite ack timeout estimation
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Do not overwrite ack timeout estimation in ath9k_hw_init_global_settings() if
dynack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/hw.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 9a6b113..b2ca47a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1055,6 +1055,14 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
ctstimeout += 48 - sifstime - ah->slottime;
}
+ if (ah->dynack.enabled) {
+ acktimeout = ah->dynack.ackto;
+ ctstimeout = acktimeout;
+ slottime = (acktimeout - 3) / 2;
+ } else {
+ ah->dynack.ackto = acktimeout;
+ }
+
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 06/10] ath9k: add sampling methods for (tx|rx) timestamp
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Add sampling methods for ack RX timestamp in ath_rx_tasklet() and for TX frame
timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer()
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 5 +++++
drivers/net/wireless/ath/ath9k/xmit.c | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 74ab1d0..ad317a4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -991,6 +991,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
unsigned long flags;
dma_addr_t new_buf_addr;
unsigned int budget = 512;
+ struct ieee80211_hdr *hdr;
if (edma)
dma_type = DMA_BIDIRECTIONAL;
@@ -1120,6 +1121,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
ath9k_apply_ampdu_details(sc, &rs, rxs);
ath_debug_rate_stats(sc, &rs, skb);
+ hdr = (struct ieee80211_hdr *)skb->data;
+ if (ieee80211_is_ack(hdr->frame_control))
+ ath_dynack_sample_ack_ts(sc->sc_ah, skb, rs.rs_tstamp);
+
ieee80211_rx(hw, skb);
requeue_drop_frag:
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3611529..122ec25 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -587,6 +587,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
memcpy(tx_info->control.rates, rates, sizeof(rates));
ath_tx_rc_status(sc, bf, ts, nframes, nbad, txok);
rc_update = false;
+ if (bf == bf->bf_lastbf)
+ ath_dynack_sample_tx_ts(sc->sc_ah,
+ bf->bf_mpdu,
+ ts);
}
ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
@@ -687,6 +691,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
memcpy(info->control.rates, bf->rates,
sizeof(info->control.rates));
ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
+ ath_dynack_sample_tx_ts(sc->sc_ah, bf->bf_mpdu, ts);
}
ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok);
} else
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 06/10] ath9k: add sampling methods for (tx|rx) timestamp
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Add sampling methods for ack RX timestamp in ath_rx_tasklet() and for TX frame
timestamp in ath_tx_complete_aggr() and in ath_tx_process_buffer()
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 5 +++++
drivers/net/wireless/ath/ath9k/xmit.c | 5 +++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 74ab1d0..ad317a4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -991,6 +991,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
unsigned long flags;
dma_addr_t new_buf_addr;
unsigned int budget = 512;
+ struct ieee80211_hdr *hdr;
if (edma)
dma_type = DMA_BIDIRECTIONAL;
@@ -1120,6 +1121,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
ath9k_apply_ampdu_details(sc, &rs, rxs);
ath_debug_rate_stats(sc, &rs, skb);
+ hdr = (struct ieee80211_hdr *)skb->data;
+ if (ieee80211_is_ack(hdr->frame_control))
+ ath_dynack_sample_ack_ts(sc->sc_ah, skb, rs.rs_tstamp);
+
ieee80211_rx(hw, skb);
requeue_drop_frag:
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3611529..122ec25 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -587,6 +587,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
memcpy(tx_info->control.rates, rates, sizeof(rates));
ath_tx_rc_status(sc, bf, ts, nframes, nbad, txok);
rc_update = false;
+ if (bf == bf->bf_lastbf)
+ ath_dynack_sample_tx_ts(sc->sc_ah,
+ bf->bf_mpdu,
+ ts);
}
ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
@@ -687,6 +691,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
memcpy(info->control.rates, bf->rates,
sizeof(info->control.rates));
ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
+ ath_dynack_sample_tx_ts(sc->sc_ah, bf->bf_mpdu, ts);
}
ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok);
} else
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 07/10] ath9k: enable control frame reception
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Enable control frame reception if dynamic ack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ad317a4..cc5ba4a 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -398,7 +398,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
if (sc->sc_ah->is_monitoring)
rfilt |= ATH9K_RX_FILTER_PROM;
- if (sc->rx.rxfilter & FIF_CONTROL)
+ if ((sc->rx.rxfilter & FIF_CONTROL) || sc->sc_ah->dynack.enabled)
rfilt |= ATH9K_RX_FILTER_CONTROL;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 07/10] ath9k: enable control frame reception
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Enable control frame reception if dynamic ack processing is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ad317a4..cc5ba4a 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -398,7 +398,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
if (sc->sc_ah->is_monitoring)
rfilt |= ATH9K_RX_FILTER_PROM;
- if (sc->rx.rxfilter & FIF_CONTROL)
+ if ((sc->rx.rxfilter & FIF_CONTROL) || sc->sc_ah->dynack.enabled)
rfilt |= ATH9K_RX_FILTER_CONTROL;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 08/10] ath9k: add debugfs support for dynack
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Add ack_to entry to debugfs in order to dump current ack timeout value.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/debug.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index d227936..8d77b7a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1169,6 +1169,29 @@ static const struct file_operations fops_btcoex = {
};
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+static ssize_t read_file_ackto(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "%u %c\n", ah->dynack.ackto,
+ (ah->dynack.enabled) ? 'A' : 'S');
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_ackto = {
+ .read = read_file_ackto,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+#endif
+
/* Ethtool support for get-stats */
#define AMKSTR(nm) #nm "_BE", #nm "_BK", #nm "_VI", #nm "_VO"
@@ -1374,5 +1397,10 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_btcoex);
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+ debugfs_create_file("ack_to", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_ackto);
+#endif
+
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 08/10] ath9k: add debugfs support for dynack
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Add ack_to entry to debugfs in order to dump current ack timeout value.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/debug.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index d227936..8d77b7a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1169,6 +1169,29 @@ static const struct file_operations fops_btcoex = {
};
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+static ssize_t read_file_ackto(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath_hw *ah = sc->sc_ah;
+ char buf[32];
+ unsigned int len;
+
+ len = sprintf(buf, "%u %c\n", ah->dynack.ackto,
+ (ah->dynack.enabled) ? 'A' : 'S');
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_ackto = {
+ .read = read_file_ackto,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+#endif
+
/* Ethtool support for get-stats */
#define AMKSTR(nm) #nm "_BE", #nm "_BK", #nm "_VI", #nm "_VO"
@@ -1374,5 +1397,10 @@ int ath9k_init_debug(struct ath_hw *ah)
&fops_btcoex);
#endif
+#ifdef CONFIG_ATH9K_DYNACK
+ debugfs_create_file("ack_to", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ sc, &fops_ackto);
+#endif
+
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
Moreover disable dynack if the coverage class has been configured
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e6ac8d2..52ca884 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
mutex_lock(&sc->mutex);
ah->coverage_class = coverage_class;
+ if (ah->dynack.enabled) {
+ u32 rfilt;
+
+ ah->dynack.enabled = false;
+ rfilt = ath_calcrxfilter(sc);
+ ath9k_hw_setrxfilter(ah, rfilt);
+ }
+
ath9k_ps_wakeup(sc);
ath9k_hw_init_global_settings(ah);
ath9k_ps_restore(sc);
@@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
mutex_unlock(&sc->mutex);
}
+#ifdef CONFIG_ATH9K_DYNACK
+static int ath9k_enable_dynack(struct ieee80211_hw *hw)
+{
+ u32 rfilt;
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+
+ if (config_enabled(CONFIG_ATH9K_TX99))
+ return -EOPNOTSUPP;
+
+ if (!ah->dynack.enabled) {
+ ath_dynack_reset(ah);
+
+ ah->dynack.enabled = true;
+ rfilt = ath_calcrxfilter(sc);
+ ath9k_hw_setrxfilter(ah, rfilt);
+ }
+
+ return 0;
+}
+#endif
+
static bool ath9k_has_tx_pending(struct ath_softc *sc)
{
int i, npend = 0;
@@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
#endif
.sw_scan_start = ath9k_sw_scan_start,
.sw_scan_complete = ath9k_sw_scan_complete,
+
+#ifdef CONFIG_ATH9K_DYNACK
+ .enable_dynack = ath9k_enable_dynack,
+#endif
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
Moreover disable dynack if the coverage class has been configured
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e6ac8d2..52ca884 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
mutex_lock(&sc->mutex);
ah->coverage_class = coverage_class;
+ if (ah->dynack.enabled) {
+ u32 rfilt;
+
+ ah->dynack.enabled = false;
+ rfilt = ath_calcrxfilter(sc);
+ ath9k_hw_setrxfilter(ah, rfilt);
+ }
+
ath9k_ps_wakeup(sc);
ath9k_hw_init_global_settings(ah);
ath9k_ps_restore(sc);
@@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
mutex_unlock(&sc->mutex);
}
+#ifdef CONFIG_ATH9K_DYNACK
+static int ath9k_enable_dynack(struct ieee80211_hw *hw)
+{
+ u32 rfilt;
+ struct ath_softc *sc = hw->priv;
+ struct ath_hw *ah = sc->sc_ah;
+
+ if (config_enabled(CONFIG_ATH9K_TX99))
+ return -EOPNOTSUPP;
+
+ if (!ah->dynack.enabled) {
+ ath_dynack_reset(ah);
+
+ ah->dynack.enabled = true;
+ rfilt = ath_calcrxfilter(sc);
+ ath9k_hw_setrxfilter(ah, rfilt);
+ }
+
+ return 0;
+}
+#endif
+
static bool ath9k_has_tx_pending(struct ath_softc *sc)
{
int i, npend = 0;
@@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
#endif
.sw_scan_start = ath9k_sw_scan_start,
.sw_scan_complete = ath9k_sw_scan_complete,
+
+#ifdef CONFIG_ATH9K_DYNACK
+ .enable_dynack = ath9k_enable_dynack,
+#endif
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 10/10] ath9k: initialize ath_node linked list
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 12:31 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: linux-wireless; +Cc: ath9k-devel, linville, Philippe Duchein
Initialize neighbor linked list used by estimation algorithm to compute maximum
sta ack timeout
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 52ca884..9a7fe6d 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -358,12 +358,16 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
memset(&an->key_idx, 0, sizeof(an->key_idx));
ath_tx_node_init(sc, an);
+
+ ath_dynack_node_init(sc->sc_ah, an);
}
static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
ath_tx_node_cleanup(sc, an);
+
+ ath_dynack_node_deinit(sc->sc_ah, an);
}
void ath9k_tasklet(unsigned long data)
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 10/10] ath9k: initialize ath_node linked list
@ 2014-07-20 12:31 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-20 12:31 UTC (permalink / raw)
To: ath9k-devel
Initialize neighbor linked list used by estimation algorithm to compute maximum
sta ack timeout
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
drivers/net/wireless/ath/ath9k/main.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 52ca884..9a7fe6d 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -358,12 +358,16 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
memset(&an->key_idx, 0, sizeof(an->key_idx));
ath_tx_node_init(sc, an);
+
+ ath_dynack_node_init(sc->sc_ah, an);
}
static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
ath_tx_node_cleanup(sc, an);
+
+ ath_dynack_node_deinit(sc->sc_ah, an);
}
void ath9k_tasklet(unsigned long data)
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: [PATCH 00/10] add support for ack timeout estimation in ath9k driver
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-20 14:05 ` Philippe DUCHEIN
-1 siblings, 0 replies; 32+ messages in thread
From: Philippe DUCHEIN @ 2014-07-20 14:05 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: linux-wireless, ath9k-devel, linville
Hi Lorenzo,
Since friday I enable dynack on an AP who serve 35 sta (on 2 MIMO 2x2 5ghz wireless cards 12&23) in outdoor (up to 8 kms)
results are good. latency is good for all sta
I’ll take your new patches and make one for openwrt and, recompile
Thanks;
Philippe
Le 20 juil. 2014 à 14:31, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> a écrit :
> This patchset adds support for estimation of the ack timeout (dynack) in ath9k
> driver. Ath9k dynack computes the ack timeout based on ack frame RX timestamp,
> TX frame timestamp and frame duration.
>
> Ath9k dynack has been tested in indoor environment using AR9223/AR9280 chipset
> (running 3.16.0-rc5 kernel) and on 9Km PtoP link using AR9280 chipset
> (running OpenWRT trunk, compat-wireless-2014-05-22)
>
> Changes since RFCv2:
> - disable dynack by default
> - add ath9k_enable_dynack() method to enable ack timeout estimation algorithm
> - remove dynack entry from ath9k debugfs
>
> Changes since RFCv1:
> - use ISC license instead of GPLv2 one
> - use an inline method instead of a macro for EWMA calculation
> - use powers of two weights in EWMA calculation
> - fix typos
> - add ath_dynack_node_init/ath_dynack_node_deinit methods
> - use different logic to enable/disable dynack processing
>
> Lorenzo Bianconi (10):
> ath9k: export methods related to ack timeout estimation
> ath9k: add duration field to ath_tx_status
> ath9k: add dynamic ack timeout estimation
> ath9k: add config for (en|dis)abling ack timeout estimation
> ath9k: do not overwrite ack timeout estimation
> ath9k: add sampling methods for (tx|rx) timestamp
> ath9k: enable control frame reception
> ath9k: add debugfs support for dynack
> ath9k: add ath9k_enable_dynack() method
> ath9k: initialize ath_node linked list
>
> drivers/net/wireless/ath/ath.h | 2 +
> drivers/net/wireless/ath/ath9k/Kconfig | 7 +
> drivers/net/wireless/ath/ath9k/Makefile | 3 +
> drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +
> drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +
> drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
> drivers/net/wireless/ath/ath9k/debug.c | 28 +++
> drivers/net/wireless/ath/ath9k/dynack.c | 345 ++++++++++++++++++++++++++++
> drivers/net/wireless/ath/ath9k/dynack.h | 96 ++++++++
> drivers/net/wireless/ath/ath9k/hw.c | 16 +-
> drivers/net/wireless/ath/ath9k/hw.h | 7 +
> drivers/net/wireless/ath/ath9k/mac.h | 1 +
> drivers/net/wireless/ath/ath9k/main.c | 38 +++
> drivers/net/wireless/ath/ath9k/recv.c | 7 +-
> drivers/net/wireless/ath/ath9k/xmit.c | 5 +
> 15 files changed, 570 insertions(+), 4 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
> create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
>
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 00/10] add support for ack timeout estimation in ath9k driver
@ 2014-07-20 14:05 ` Philippe DUCHEIN
0 siblings, 0 replies; 32+ messages in thread
From: Philippe DUCHEIN @ 2014-07-20 14:05 UTC (permalink / raw)
To: ath9k-devel
Hi Lorenzo,
Since friday I enable dynack on an AP who serve 35 sta (on 2 MIMO 2x2 5ghz wireless cards 12&23) in outdoor (up to 8 kms)
results are good. latency is good for all sta
I?ll take your new patches and make one for openwrt and, recompile
Thanks;
Philippe
Le 20 juil. 2014 ? 14:31, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> a ?crit :
> This patchset adds support for estimation of the ack timeout (dynack) in ath9k
> driver. Ath9k dynack computes the ack timeout based on ack frame RX timestamp,
> TX frame timestamp and frame duration.
>
> Ath9k dynack has been tested in indoor environment using AR9223/AR9280 chipset
> (running 3.16.0-rc5 kernel) and on 9Km PtoP link using AR9280 chipset
> (running OpenWRT trunk, compat-wireless-2014-05-22)
>
> Changes since RFCv2:
> - disable dynack by default
> - add ath9k_enable_dynack() method to enable ack timeout estimation algorithm
> - remove dynack entry from ath9k debugfs
>
> Changes since RFCv1:
> - use ISC license instead of GPLv2 one
> - use an inline method instead of a macro for EWMA calculation
> - use powers of two weights in EWMA calculation
> - fix typos
> - add ath_dynack_node_init/ath_dynack_node_deinit methods
> - use different logic to enable/disable dynack processing
>
> Lorenzo Bianconi (10):
> ath9k: export methods related to ack timeout estimation
> ath9k: add duration field to ath_tx_status
> ath9k: add dynamic ack timeout estimation
> ath9k: add config for (en|dis)abling ack timeout estimation
> ath9k: do not overwrite ack timeout estimation
> ath9k: add sampling methods for (tx|rx) timestamp
> ath9k: enable control frame reception
> ath9k: add debugfs support for dynack
> ath9k: add ath9k_enable_dynack() method
> ath9k: initialize ath_node linked list
>
> drivers/net/wireless/ath/ath.h | 2 +
> drivers/net/wireless/ath/ath9k/Kconfig | 7 +
> drivers/net/wireless/ath/ath9k/Makefile | 3 +
> drivers/net/wireless/ath/ath9k/ar9002_mac.c | 7 +
> drivers/net/wireless/ath/ath9k/ar9003_mac.c | 9 +
> drivers/net/wireless/ath/ath9k/ath9k.h | 3 +
> drivers/net/wireless/ath/ath9k/debug.c | 28 +++
> drivers/net/wireless/ath/ath9k/dynack.c | 345 ++++++++++++++++++++++++++++
> drivers/net/wireless/ath/ath9k/dynack.h | 96 ++++++++
> drivers/net/wireless/ath/ath9k/hw.c | 16 +-
> drivers/net/wireless/ath/ath9k/hw.h | 7 +
> drivers/net/wireless/ath/ath9k/mac.h | 1 +
> drivers/net/wireless/ath/ath9k/main.c | 38 +++
> drivers/net/wireless/ath/ath9k/recv.c | 7 +-
> drivers/net/wireless/ath/ath9k/xmit.c | 5 +
> 15 files changed, 570 insertions(+), 4 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath9k/dynack.c
> create mode 100644 drivers/net/wireless/ath/ath9k/dynack.h
>
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-22 18:02 ` John W. Linville
-1 siblings, 0 replies; 32+ messages in thread
From: John W. Linville @ 2014-07-22 18:02 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: linux-wireless, ath9k-devel, Philippe Duchein
On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
> Moreover disable dynack if the coverage class has been configured
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> ---
> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
> index e6ac8d2..52ca884 100644
> --- a/drivers/net/wireless/ath/ath9k/main.c
> +++ b/drivers/net/wireless/ath/ath9k/main.c
> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> mutex_lock(&sc->mutex);
> ah->coverage_class = coverage_class;
>
> + if (ah->dynack.enabled) {
> + u32 rfilt;
> +
> + ah->dynack.enabled = false;
> + rfilt = ath_calcrxfilter(sc);
> + ath9k_hw_setrxfilter(ah, rfilt);
> + }
> +
> ath9k_ps_wakeup(sc);
> ath9k_hw_init_global_settings(ah);
> ath9k_ps_restore(sc);
> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> mutex_unlock(&sc->mutex);
> }
>
> +#ifdef CONFIG_ATH9K_DYNACK
> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
> +{
> + u32 rfilt;
> + struct ath_softc *sc = hw->priv;
> + struct ath_hw *ah = sc->sc_ah;
> +
> + if (config_enabled(CONFIG_ATH9K_TX99))
> + return -EOPNOTSUPP;
> +
> + if (!ah->dynack.enabled) {
> + ath_dynack_reset(ah);
> +
> + ah->dynack.enabled = true;
> + rfilt = ath_calcrxfilter(sc);
> + ath9k_hw_setrxfilter(ah, rfilt);
> + }
> +
> + return 0;
> +}
> +#endif
> +
> static bool ath9k_has_tx_pending(struct ath_softc *sc)
> {
> int i, npend = 0;
> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
> #endif
> .sw_scan_start = ath9k_sw_scan_start,
> .sw_scan_complete = ath9k_sw_scan_complete,
> +
> +#ifdef CONFIG_ATH9K_DYNACK
> + .enable_dynack = ath9k_enable_dynack,
> +#endif
> };
CC drivers/net/wireless/ath/ath9k/main.o
drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ‘enable_dynack’ specified in initializer
.enable_dynack = ath9k_enable_dynack,
^
drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ‘ath9k_ops.get_stats’) [enabled by default]
make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
make[1]: *** [drivers/net/wireless/ath] Error 2
make: *** [drivers/net/wireless/] Error 2
Missing a header file change?
John
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
@ 2014-07-22 18:02 ` John W. Linville
0 siblings, 0 replies; 32+ messages in thread
From: John W. Linville @ 2014-07-22 18:02 UTC (permalink / raw)
To: ath9k-devel
On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
> Moreover disable dynack if the coverage class has been configured
>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> ---
> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
> index e6ac8d2..52ca884 100644
> --- a/drivers/net/wireless/ath/ath9k/main.c
> +++ b/drivers/net/wireless/ath/ath9k/main.c
> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> mutex_lock(&sc->mutex);
> ah->coverage_class = coverage_class;
>
> + if (ah->dynack.enabled) {
> + u32 rfilt;
> +
> + ah->dynack.enabled = false;
> + rfilt = ath_calcrxfilter(sc);
> + ath9k_hw_setrxfilter(ah, rfilt);
> + }
> +
> ath9k_ps_wakeup(sc);
> ath9k_hw_init_global_settings(ah);
> ath9k_ps_restore(sc);
> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> mutex_unlock(&sc->mutex);
> }
>
> +#ifdef CONFIG_ATH9K_DYNACK
> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
> +{
> + u32 rfilt;
> + struct ath_softc *sc = hw->priv;
> + struct ath_hw *ah = sc->sc_ah;
> +
> + if (config_enabled(CONFIG_ATH9K_TX99))
> + return -EOPNOTSUPP;
> +
> + if (!ah->dynack.enabled) {
> + ath_dynack_reset(ah);
> +
> + ah->dynack.enabled = true;
> + rfilt = ath_calcrxfilter(sc);
> + ath9k_hw_setrxfilter(ah, rfilt);
> + }
> +
> + return 0;
> +}
> +#endif
> +
> static bool ath9k_has_tx_pending(struct ath_softc *sc)
> {
> int i, npend = 0;
> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
> #endif
> .sw_scan_start = ath9k_sw_scan_start,
> .sw_scan_complete = ath9k_sw_scan_complete,
> +
> +#ifdef CONFIG_ATH9K_DYNACK
> + .enable_dynack = ath9k_enable_dynack,
> +#endif
> };
CC drivers/net/wireless/ath/ath9k/main.o
drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ?enable_dynack? specified in initializer
.enable_dynack = ath9k_enable_dynack,
^
drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ?ath9k_ops.get_stats?) [enabled by default]
make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
make[1]: *** [drivers/net/wireless/ath] Error 2
make: *** [drivers/net/wireless/] Error 2
Missing a header file change?
John
--
John W. Linville Someday the world will need a hero, and you
linville at tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
2014-07-22 18:02 ` [ath9k-devel] " John W. Linville
@ 2014-07-22 19:52 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-22 19:52 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, ath9k-devel, Philippe Duchein
Hi John,
> On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
>> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
>> Moreover disable dynack if the coverage class has been configured
>>
>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
>> ---
>> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
>> index e6ac8d2..52ca884 100644
>> --- a/drivers/net/wireless/ath/ath9k/main.c
>> +++ b/drivers/net/wireless/ath/ath9k/main.c
>> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> mutex_lock(&sc->mutex);
>> ah->coverage_class = coverage_class;
>>
>> + if (ah->dynack.enabled) {
>> + u32 rfilt;
>> +
>> + ah->dynack.enabled = false;
>> + rfilt = ath_calcrxfilter(sc);
>> + ath9k_hw_setrxfilter(ah, rfilt);
>> + }
>> +
>> ath9k_ps_wakeup(sc);
>> ath9k_hw_init_global_settings(ah);
>> ath9k_ps_restore(sc);
>> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> mutex_unlock(&sc->mutex);
>> }
>>
>> +#ifdef CONFIG_ATH9K_DYNACK
>> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
>> +{
>> + u32 rfilt;
>> + struct ath_softc *sc = hw->priv;
>> + struct ath_hw *ah = sc->sc_ah;
>> +
>> + if (config_enabled(CONFIG_ATH9K_TX99))
>> + return -EOPNOTSUPP;
>> +
>> + if (!ah->dynack.enabled) {
>> + ath_dynack_reset(ah);
>> +
>> + ah->dynack.enabled = true;
>> + rfilt = ath_calcrxfilter(sc);
>> + ath9k_hw_setrxfilter(ah, rfilt);
>> + }
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> static bool ath9k_has_tx_pending(struct ath_softc *sc)
>> {
>> int i, npend = 0;
>> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
>> #endif
>> .sw_scan_start = ath9k_sw_scan_start,
>> .sw_scan_complete = ath9k_sw_scan_complete,
>> +
>> +#ifdef CONFIG_ATH9K_DYNACK
>> + .enable_dynack = ath9k_enable_dynack,
>> +#endif
>> };
>
> CC drivers/net/wireless/ath/ath9k/main.o
> drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ‘enable_dynack’ specified in initializer
> .enable_dynack = ath9k_enable_dynack,
> ^
> drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
> drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ‘ath9k_ops.get_stats’) [enabled by default]
> make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
> make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
> make[1]: *** [drivers/net/wireless/ath] Error 2
> make: *** [drivers/net/wireless/] Error 2
>
> Missing a header file change?
>
The function pointer is defined in "configure ack timeout estimation
algorithm through mac80211 stack" patchset sent on linux-wireless.
Anyway I will send patchset v3 to take Johannes's hint.
> John
> --
> John W. Linville Someday the world will need a hero, and you
> linville@tuxdriver.com might be all we have. Be ready.
Best regards,
Lorenzo
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
@ 2014-07-22 19:52 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-22 19:52 UTC (permalink / raw)
To: ath9k-devel
Hi John,
> On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
>> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
>> Moreover disable dynack if the coverage class has been configured
>>
>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
>> ---
>> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
>> index e6ac8d2..52ca884 100644
>> --- a/drivers/net/wireless/ath/ath9k/main.c
>> +++ b/drivers/net/wireless/ath/ath9k/main.c
>> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> mutex_lock(&sc->mutex);
>> ah->coverage_class = coverage_class;
>>
>> + if (ah->dynack.enabled) {
>> + u32 rfilt;
>> +
>> + ah->dynack.enabled = false;
>> + rfilt = ath_calcrxfilter(sc);
>> + ath9k_hw_setrxfilter(ah, rfilt);
>> + }
>> +
>> ath9k_ps_wakeup(sc);
>> ath9k_hw_init_global_settings(ah);
>> ath9k_ps_restore(sc);
>> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> mutex_unlock(&sc->mutex);
>> }
>>
>> +#ifdef CONFIG_ATH9K_DYNACK
>> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
>> +{
>> + u32 rfilt;
>> + struct ath_softc *sc = hw->priv;
>> + struct ath_hw *ah = sc->sc_ah;
>> +
>> + if (config_enabled(CONFIG_ATH9K_TX99))
>> + return -EOPNOTSUPP;
>> +
>> + if (!ah->dynack.enabled) {
>> + ath_dynack_reset(ah);
>> +
>> + ah->dynack.enabled = true;
>> + rfilt = ath_calcrxfilter(sc);
>> + ath9k_hw_setrxfilter(ah, rfilt);
>> + }
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> static bool ath9k_has_tx_pending(struct ath_softc *sc)
>> {
>> int i, npend = 0;
>> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
>> #endif
>> .sw_scan_start = ath9k_sw_scan_start,
>> .sw_scan_complete = ath9k_sw_scan_complete,
>> +
>> +#ifdef CONFIG_ATH9K_DYNACK
>> + .enable_dynack = ath9k_enable_dynack,
>> +#endif
>> };
>
> CC drivers/net/wireless/ath/ath9k/main.o
> drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ?enable_dynack? specified in initializer
> .enable_dynack = ath9k_enable_dynack,
> ^
> drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
> drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ?ath9k_ops.get_stats?) [enabled by default]
> make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
> make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
> make[1]: *** [drivers/net/wireless/ath] Error 2
> make: *** [drivers/net/wireless/] Error 2
>
> Missing a header file change?
>
The function pointer is defined in "configure ack timeout estimation
algorithm through mac80211 stack" patchset sent on linux-wireless.
Anyway I will send patchset v3 to take Johannes's hint.
> John
> --
> John W. Linville Someday the world will need a hero, and you
> linville at tuxdriver.com might be all we have. Be ready.
Best regards,
Lorenzo
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
2014-07-22 19:52 ` [ath9k-devel] " Lorenzo Bianconi
@ 2014-07-22 21:23 ` John W. Linville
-1 siblings, 0 replies; 32+ messages in thread
From: John W. Linville @ 2014-07-22 21:23 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: linux-wireless, ath9k-devel, Philippe Duchein
On Tue, Jul 22, 2014 at 09:52:04PM +0200, Lorenzo Bianconi wrote:
> Hi John,
>
> > On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
> >> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
> >> Moreover disable dynack if the coverage class has been configured
> >>
> >> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> >> ---
> >> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
> >> 1 file changed, 34 insertions(+)
> >>
> >> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
> >> index e6ac8d2..52ca884 100644
> >> --- a/drivers/net/wireless/ath/ath9k/main.c
> >> +++ b/drivers/net/wireless/ath/ath9k/main.c
> >> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> >> mutex_lock(&sc->mutex);
> >> ah->coverage_class = coverage_class;
> >>
> >> + if (ah->dynack.enabled) {
> >> + u32 rfilt;
> >> +
> >> + ah->dynack.enabled = false;
> >> + rfilt = ath_calcrxfilter(sc);
> >> + ath9k_hw_setrxfilter(ah, rfilt);
> >> + }
> >> +
> >> ath9k_ps_wakeup(sc);
> >> ath9k_hw_init_global_settings(ah);
> >> ath9k_ps_restore(sc);
> >> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> >> mutex_unlock(&sc->mutex);
> >> }
> >>
> >> +#ifdef CONFIG_ATH9K_DYNACK
> >> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
> >> +{
> >> + u32 rfilt;
> >> + struct ath_softc *sc = hw->priv;
> >> + struct ath_hw *ah = sc->sc_ah;
> >> +
> >> + if (config_enabled(CONFIG_ATH9K_TX99))
> >> + return -EOPNOTSUPP;
> >> +
> >> + if (!ah->dynack.enabled) {
> >> + ath_dynack_reset(ah);
> >> +
> >> + ah->dynack.enabled = true;
> >> + rfilt = ath_calcrxfilter(sc);
> >> + ath9k_hw_setrxfilter(ah, rfilt);
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +#endif
> >> +
> >> static bool ath9k_has_tx_pending(struct ath_softc *sc)
> >> {
> >> int i, npend = 0;
> >> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
> >> #endif
> >> .sw_scan_start = ath9k_sw_scan_start,
> >> .sw_scan_complete = ath9k_sw_scan_complete,
> >> +
> >> +#ifdef CONFIG_ATH9K_DYNACK
> >> + .enable_dynack = ath9k_enable_dynack,
> >> +#endif
> >> };
> >
> > CC drivers/net/wireless/ath/ath9k/main.o
> > drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ‘enable_dynack’ specified in initializer
> > .enable_dynack = ath9k_enable_dynack,
> > ^
> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ‘ath9k_ops.get_stats’) [enabled by default]
> > make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
> > make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
> > make[1]: *** [drivers/net/wireless/ath] Error 2
> > make: *** [drivers/net/wireless/] Error 2
> >
> > Missing a header file change?
> >
>
> The function pointer is defined in "configure ack timeout estimation
> algorithm through mac80211 stack" patchset sent on linux-wireless.
> Anyway I will send patchset v3 to take Johannes's hint.
Perhaps you should post them all together, or keep this series as
RFC until the other one gets merged?
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
@ 2014-07-22 21:23 ` John W. Linville
0 siblings, 0 replies; 32+ messages in thread
From: John W. Linville @ 2014-07-22 21:23 UTC (permalink / raw)
To: ath9k-devel
On Tue, Jul 22, 2014 at 09:52:04PM +0200, Lorenzo Bianconi wrote:
> Hi John,
>
> > On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
> >> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
> >> Moreover disable dynack if the coverage class has been configured
> >>
> >> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
> >> ---
> >> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
> >> 1 file changed, 34 insertions(+)
> >>
> >> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
> >> index e6ac8d2..52ca884 100644
> >> --- a/drivers/net/wireless/ath/ath9k/main.c
> >> +++ b/drivers/net/wireless/ath/ath9k/main.c
> >> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> >> mutex_lock(&sc->mutex);
> >> ah->coverage_class = coverage_class;
> >>
> >> + if (ah->dynack.enabled) {
> >> + u32 rfilt;
> >> +
> >> + ah->dynack.enabled = false;
> >> + rfilt = ath_calcrxfilter(sc);
> >> + ath9k_hw_setrxfilter(ah, rfilt);
> >> + }
> >> +
> >> ath9k_ps_wakeup(sc);
> >> ath9k_hw_init_global_settings(ah);
> >> ath9k_ps_restore(sc);
> >> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
> >> mutex_unlock(&sc->mutex);
> >> }
> >>
> >> +#ifdef CONFIG_ATH9K_DYNACK
> >> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
> >> +{
> >> + u32 rfilt;
> >> + struct ath_softc *sc = hw->priv;
> >> + struct ath_hw *ah = sc->sc_ah;
> >> +
> >> + if (config_enabled(CONFIG_ATH9K_TX99))
> >> + return -EOPNOTSUPP;
> >> +
> >> + if (!ah->dynack.enabled) {
> >> + ath_dynack_reset(ah);
> >> +
> >> + ah->dynack.enabled = true;
> >> + rfilt = ath_calcrxfilter(sc);
> >> + ath9k_hw_setrxfilter(ah, rfilt);
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +#endif
> >> +
> >> static bool ath9k_has_tx_pending(struct ath_softc *sc)
> >> {
> >> int i, npend = 0;
> >> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
> >> #endif
> >> .sw_scan_start = ath9k_sw_scan_start,
> >> .sw_scan_complete = ath9k_sw_scan_complete,
> >> +
> >> +#ifdef CONFIG_ATH9K_DYNACK
> >> + .enable_dynack = ath9k_enable_dynack,
> >> +#endif
> >> };
> >
> > CC drivers/net/wireless/ath/ath9k/main.o
> > drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ?enable_dynack? specified in initializer
> > .enable_dynack = ath9k_enable_dynack,
> > ^
> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ?ath9k_ops.get_stats?) [enabled by default]
> > make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
> > make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
> > make[1]: *** [drivers/net/wireless/ath] Error 2
> > make: *** [drivers/net/wireless/] Error 2
> >
> > Missing a header file change?
> >
>
> The function pointer is defined in "configure ack timeout estimation
> algorithm through mac80211 stack" patchset sent on linux-wireless.
> Anyway I will send patchset v3 to take Johannes's hint.
Perhaps you should post them all together, or keep this series as
RFC until the other one gets merged?
--
John W. Linville Someday the world will need a hero, and you
linville at tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
2014-07-22 21:23 ` [ath9k-devel] " John W. Linville
@ 2014-07-22 22:17 ` Lorenzo Bianconi
-1 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-22 22:17 UTC (permalink / raw)
To: John W. Linville; +Cc: linux-wireless, ath9k-devel, Philippe Duchein
> On Tue, Jul 22, 2014 at 09:52:04PM +0200, Lorenzo Bianconi wrote:
>> Hi John,
>>
>> > On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
>> >> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
>> >> Moreover disable dynack if the coverage class has been configured
>> >>
>> >> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
>> >> ---
>> >> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
>> >> 1 file changed, 34 insertions(+)
>> >>
>> >> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
>> >> index e6ac8d2..52ca884 100644
>> >> --- a/drivers/net/wireless/ath/ath9k/main.c
>> >> +++ b/drivers/net/wireless/ath/ath9k/main.c
>> >> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> >> mutex_lock(&sc->mutex);
>> >> ah->coverage_class = coverage_class;
>> >>
>> >> + if (ah->dynack.enabled) {
>> >> + u32 rfilt;
>> >> +
>> >> + ah->dynack.enabled = false;
>> >> + rfilt = ath_calcrxfilter(sc);
>> >> + ath9k_hw_setrxfilter(ah, rfilt);
>> >> + }
>> >> +
>> >> ath9k_ps_wakeup(sc);
>> >> ath9k_hw_init_global_settings(ah);
>> >> ath9k_ps_restore(sc);
>> >> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> >> mutex_unlock(&sc->mutex);
>> >> }
>> >>
>> >> +#ifdef CONFIG_ATH9K_DYNACK
>> >> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
>> >> +{
>> >> + u32 rfilt;
>> >> + struct ath_softc *sc = hw->priv;
>> >> + struct ath_hw *ah = sc->sc_ah;
>> >> +
>> >> + if (config_enabled(CONFIG_ATH9K_TX99))
>> >> + return -EOPNOTSUPP;
>> >> +
>> >> + if (!ah->dynack.enabled) {
>> >> + ath_dynack_reset(ah);
>> >> +
>> >> + ah->dynack.enabled = true;
>> >> + rfilt = ath_calcrxfilter(sc);
>> >> + ath9k_hw_setrxfilter(ah, rfilt);
>> >> + }
>> >> +
>> >> + return 0;
>> >> +}
>> >> +#endif
>> >> +
>> >> static bool ath9k_has_tx_pending(struct ath_softc *sc)
>> >> {
>> >> int i, npend = 0;
>> >> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
>> >> #endif
>> >> .sw_scan_start = ath9k_sw_scan_start,
>> >> .sw_scan_complete = ath9k_sw_scan_complete,
>> >> +
>> >> +#ifdef CONFIG_ATH9K_DYNACK
>> >> + .enable_dynack = ath9k_enable_dynack,
>> >> +#endif
>> >> };
>> >
>> > CC drivers/net/wireless/ath/ath9k/main.o
>> > drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ‘enable_dynack’ specified in initializer
>> > .enable_dynack = ath9k_enable_dynack,
>> > ^
>> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
>> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ‘ath9k_ops.get_stats’) [enabled by default]
>> > make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
>> > make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
>> > make[1]: *** [drivers/net/wireless/ath] Error 2
>> > make: *** [drivers/net/wireless/] Error 2
>> >
>> > Missing a header file change?
>> >
>>
>> The function pointer is defined in "configure ack timeout estimation
>> algorithm through mac80211 stack" patchset sent on linux-wireless.
>> Anyway I will send patchset v3 to take Johannes's hint.
>
> Perhaps you should post them all together, or keep this series as
> RFC until the other one gets merged?
>
Ack. First of all I will include Johannes's hints in "configure ack
timeout estimation algorithm through mac80211 stack" in such a way the
function pointer is merged and then I will send a new patchset for
dynack.
Best regards,
Lorenzo
> --
> John W. Linville Someday the world will need a hero, and you
> linville@tuxdriver.com might be all we have. Be ready.
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
^ permalink raw reply [flat|nested] 32+ messages in thread
* [ath9k-devel] [PATCH 09/10] ath9k: add ath9k_enable_dynack() method
@ 2014-07-22 22:17 ` Lorenzo Bianconi
0 siblings, 0 replies; 32+ messages in thread
From: Lorenzo Bianconi @ 2014-07-22 22:17 UTC (permalink / raw)
To: ath9k-devel
> On Tue, Jul 22, 2014 at 09:52:04PM +0200, Lorenzo Bianconi wrote:
>> Hi John,
>>
>> > On Sun, Jul 20, 2014 at 02:31:25PM +0200, Lorenzo Bianconi wrote:
>> >> Add ath9k_enable_dynack() method to enable ack timeout estimation algorithm.
>> >> Moreover disable dynack if the coverage class has been configured
>> >>
>> >> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
>> >> ---
>> >> drivers/net/wireless/ath/ath9k/main.c | 34 ++++++++++++++++++++++++++++++++++
>> >> 1 file changed, 34 insertions(+)
>> >>
>> >> diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
>> >> index e6ac8d2..52ca884 100644
>> >> --- a/drivers/net/wireless/ath/ath9k/main.c
>> >> +++ b/drivers/net/wireless/ath/ath9k/main.c
>> >> @@ -1970,6 +1970,14 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> >> mutex_lock(&sc->mutex);
>> >> ah->coverage_class = coverage_class;
>> >>
>> >> + if (ah->dynack.enabled) {
>> >> + u32 rfilt;
>> >> +
>> >> + ah->dynack.enabled = false;
>> >> + rfilt = ath_calcrxfilter(sc);
>> >> + ath9k_hw_setrxfilter(ah, rfilt);
>> >> + }
>> >> +
>> >> ath9k_ps_wakeup(sc);
>> >> ath9k_hw_init_global_settings(ah);
>> >> ath9k_ps_restore(sc);
>> >> @@ -1977,6 +1985,28 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
>> >> mutex_unlock(&sc->mutex);
>> >> }
>> >>
>> >> +#ifdef CONFIG_ATH9K_DYNACK
>> >> +static int ath9k_enable_dynack(struct ieee80211_hw *hw)
>> >> +{
>> >> + u32 rfilt;
>> >> + struct ath_softc *sc = hw->priv;
>> >> + struct ath_hw *ah = sc->sc_ah;
>> >> +
>> >> + if (config_enabled(CONFIG_ATH9K_TX99))
>> >> + return -EOPNOTSUPP;
>> >> +
>> >> + if (!ah->dynack.enabled) {
>> >> + ath_dynack_reset(ah);
>> >> +
>> >> + ah->dynack.enabled = true;
>> >> + rfilt = ath_calcrxfilter(sc);
>> >> + ath9k_hw_setrxfilter(ah, rfilt);
>> >> + }
>> >> +
>> >> + return 0;
>> >> +}
>> >> +#endif
>> >> +
>> >> static bool ath9k_has_tx_pending(struct ath_softc *sc)
>> >> {
>> >> int i, npend = 0;
>> >> @@ -2651,4 +2681,8 @@ struct ieee80211_ops ath9k_ops = {
>> >> #endif
>> >> .sw_scan_start = ath9k_sw_scan_start,
>> >> .sw_scan_complete = ath9k_sw_scan_complete,
>> >> +
>> >> +#ifdef CONFIG_ATH9K_DYNACK
>> >> + .enable_dynack = ath9k_enable_dynack,
>> >> +#endif
>> >> };
>> >
>> > CC drivers/net/wireless/ath/ath9k/main.o
>> > drivers/net/wireless/ath/ath9k/main.c:2690:2: error: unknown field ?enable_dynack? specified in initializer
>> > .enable_dynack = ath9k_enable_dynack,
>> > ^
>> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: initialization from incompatible pointer type [enabled by default]
>> > drivers/net/wireless/ath/ath9k/main.c:2690:2: warning: (near initialization for ?ath9k_ops.get_stats?) [enabled by default]
>> > make[3]: *** [drivers/net/wireless/ath/ath9k/main.o] Error 1
>> > make[2]: *** [drivers/net/wireless/ath/ath9k] Error 2
>> > make[1]: *** [drivers/net/wireless/ath] Error 2
>> > make: *** [drivers/net/wireless/] Error 2
>> >
>> > Missing a header file change?
>> >
>>
>> The function pointer is defined in "configure ack timeout estimation
>> algorithm through mac80211 stack" patchset sent on linux-wireless.
>> Anyway I will send patchset v3 to take Johannes's hint.
>
> Perhaps you should post them all together, or keep this series as
> RFC until the other one gets merged?
>
Ack. First of all I will include Johannes's hints in "configure ack
timeout estimation algorithm through mac80211 stack" in such a way the
function pointer is merged and then I will send a new patchset for
dynack.
Best regards,
Lorenzo
> --
> John W. Linville Someday the world will need a hero, and you
> linville at tuxdriver.com might be all we have. Be ready.
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2014-07-22 22:17 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-20 12:31 [PATCH 00/10] add support for ack timeout estimation in ath9k driver Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 01/10] ath9k: export methods related to ack timeout estimation Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 02/10] ath9k: add duration field to ath_tx_status Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 03/10] ath9k: add dynamic ack timeout estimation Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 04/10] ath9k: add config for (en|dis)abling " Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 05/10] ath9k: do not overwrite " Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 06/10] ath9k: add sampling methods for (tx|rx) timestamp Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 07/10] ath9k: enable control frame reception Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 08/10] ath9k: add debugfs support for dynack Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 09/10] ath9k: add ath9k_enable_dynack() method Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-22 18:02 ` John W. Linville
2014-07-22 18:02 ` [ath9k-devel] " John W. Linville
2014-07-22 19:52 ` Lorenzo Bianconi
2014-07-22 19:52 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-22 21:23 ` John W. Linville
2014-07-22 21:23 ` [ath9k-devel] " John W. Linville
2014-07-22 22:17 ` Lorenzo Bianconi
2014-07-22 22:17 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 12:31 ` [PATCH 10/10] ath9k: initialize ath_node linked list Lorenzo Bianconi
2014-07-20 12:31 ` [ath9k-devel] " Lorenzo Bianconi
2014-07-20 14:05 ` [PATCH 00/10] add support for ack timeout estimation in ath9k driver Philippe DUCHEIN
2014-07-20 14:05 ` [ath9k-devel] " Philippe DUCHEIN
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.