* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-02 9:57 ` Uwe Kleine-König
0 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-02 9:57 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: kernel, Kukjin Kim, linux-samsung-soc
ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so <asm/memory.h> doesn't
include <mach/memory.h> and so this file is not used and can go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
---
arch/arm/mach-exynos/include/mach/memory.h | 27 ---------------------------
1 file changed, 27 deletions(-)
delete mode 100644 arch/arm/mach-exynos/include/mach/memory.h
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
deleted file mode 100644
index 2a4cdb7cb326..000000000000
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-
-#ifndef CONFIG_ARM_LPAE
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS 32
-#define SECTION_SIZE_BITS 28
-#else
-#define MAX_PHYSMEM_BITS 36
-#define SECTION_SIZE_BITS 31
-#endif
-
-#endif /* __ASM_ARCH_MEMORY_H */
--
2.0.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-02 9:57 ` Uwe Kleine-König
0 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-02 9:57 UTC (permalink / raw)
To: linux-arm-kernel
ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so <asm/memory.h> doesn't
include <mach/memory.h> and so this file is not used and can go away.
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc at vger.kernel.org
---
arch/arm/mach-exynos/include/mach/memory.h | 27 ---------------------------
1 file changed, 27 deletions(-)
delete mode 100644 arch/arm/mach-exynos/include/mach/memory.h
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
deleted file mode 100644
index 2a4cdb7cb326..000000000000
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-
-#ifndef CONFIG_ARM_LPAE
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS 32
-#define SECTION_SIZE_BITS 28
-#else
-#define MAX_PHYSMEM_BITS 36
-#define SECTION_SIZE_BITS 31
-#endif
-
-#endif /* __ASM_ARCH_MEMORY_H */
--
2.0.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-02 9:57 ` Uwe Kleine-König
(?)
@ 2014-07-02 9:57 ` Uwe Kleine-König
2014-07-02 10:38 ` Russell King - ARM Linux
2014-07-07 7:13 ` [PATCH v2 " Uwe Kleine-König
-1 siblings, 2 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-02 9:57 UTC (permalink / raw)
To: linux-arm-kernel
The platforms selecting NEED_MACH_MEMORY_H defined the start address of
their physical memory in the respective <mach/memory.h>. With
ARM_PATCH_PHYS_VIRT=y (which is quite common today) this is useless
though because the definition isn't used but determined dynamically.
So remove the definitions from all <mach/memory.h> and provide the
Kconfig symbol PHYS_OFFSET with the respective defaults in case
ARM_PATCH_PHYS_VIRT isn't enabled.
This allows to drop the dependency of PHYS_OFFSET on !NEED_MACH_MEMORY_H
which prevents compiling an integrator nommu-kernel.
(CONFIG_PAGE_OFFSET which has "default PHYS_OFFSET if !MMU" expanded to
"0x" because CONFIG_PHYS_OFFSET doesn't exist as INTEGRATOR selects
NEED_MACH_MEMORY_H.)
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
arch/arm/Kconfig | 11 +++++++++--
arch/arm/include/asm/memory.h | 6 ++----
arch/arm/mach-ebsa110/include/mach/memory.h | 5 -----
arch/arm/mach-ep93xx/include/mach/memory.h | 22 ----------------------
| 5 -----
arch/arm/mach-integrator/include/mach/memory.h | 5 -----
arch/arm/mach-iop13xx/include/mach/memory.h | 5 -----
arch/arm/mach-ks8695/include/mach/memory.h | 5 -----
arch/arm/mach-omap1/include/mach/memory.h | 5 -----
arch/arm/mach-realview/include/mach/memory.h | 11 -----------
arch/arm/mach-rpc/include/mach/memory.h | 5 -----
arch/arm/mach-s5pv210/include/mach/memory.h | 2 --
arch/arm/mach-sa1100/include/mach/memory.h | 5 -----
13 files changed, 11 insertions(+), 81 deletions(-)
delete mode 100644 arch/arm/mach-ep93xx/include/mach/memory.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 245058b3b0ef..6dab0604b911 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -262,8 +262,16 @@ config NEED_MACH_MEMORY_H
config PHYS_OFFSET
hex "Physical address of main memory" if MMU
- depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
+ default 0x00000000 if ARCH_EBSA110 || EP93XX_SDCE3_SYNC_PHYS_OFFSET || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_IOP13XX || ARCH_KS8695 || (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+ default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
+ default 0x20000000 if ARCH_S5PV210
+ default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
+ default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
+ default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
+ default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
+ default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
help
Please provide the physical address corresponding to the
location of main memory in your system.
@@ -435,7 +443,6 @@ config ARCH_EP93XX
select ARM_VIC
select CLKDEV_LOOKUP
select CPU_ARM920T
- select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 2b751464d6ff..04ccf1c0a1af 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -150,13 +150,11 @@
/*
* PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
- * memory. This is used for XIP and NoMMU kernels, or by kernels which
- * have their own mach/memory.h. Assembly code must always use
+ * memory. This is used for XIP and NoMMU kernels, and on platforms that don't
+ * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use
* PLAT_PHYS_OFFSET and not PHYS_OFFSET.
*/
-#ifndef PLAT_PHYS_OFFSET
#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
-#endif
#ifndef __ASSEMBLY__
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
index 8e49066ad850..866f8a1c6ff7 100644
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -17,11 +17,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-/*
* Cache flushing area - SRAM
*/
#define FLUSH_BASE_PHYS 0x40000000
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
deleted file mode 100644
index c9400cf0051c..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xc0000000)
-#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xd0000000)
-#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xe0000000)
-#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xf0000000)
-#else
-#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
-#endif
-
-#endif
--git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 5c6df377f969..6f2ecccdf323 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -59,11 +59,6 @@ extern unsigned long __bus_to_pfn(unsigned long);
*/
#define FLUSH_BASE 0xf9000000
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
#define FLUSH_BASE_PHYS 0x50000000
#endif
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index 334d5e271889..7268cb50ded0 100644
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -20,11 +20,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET)
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 7c032d0ab24a..59307e787588 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -3,11 +3,6 @@
#include <mach/hardware.h>
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_IOP13XX)
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 95e731a7ed6a..ab0d27fa8969 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -15,11 +15,6 @@
#include <mach/hardware.h>
-/*
- * Physical SRAM offset.
- */
-#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA
-
#ifndef __ASSEMBLY__
#ifdef CONFIG_PCI
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 3c2530523111..058a4f7d44c5 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -6,11 +6,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-
-/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index db09170e3832..eb69feb3b804 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -21,17 +21,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#define PLAT_PHYS_OFFSET UL(0x70000000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#endif
-
-#ifdef CONFIG_SPARSEMEM
-
-/*
* Sparsemem definitions for RealView PBX.
*
* The RealView PBX board has another block of 512MB of RAM at 0x20000000,
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
index 18a221093bf5..b7e49571417d 100644
--- a/arch/arm/mach-rpc/include/mach/memory.h
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -19,11 +19,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-
-/*
* Cache flushing area - ROM
*/
#define FLUSH_BASE_PHYS 0x00000000
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 2d3cfa221d5f..d584fac9156b 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
/*
* Sparsemem support
* Physical memory can be located from 0x20000000 to 0x7fffffff,
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index 12d376795abc..2054051eb797 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -10,11 +10,6 @@
#include <asm/sizes.h>
/*
- * Physical DRAM offset is 0xc0000000 on the SA1100
- */
-#define PLAT_PHYS_OFFSET UL(0xc0000000)
-
-/*
* Because of the wide memory address space between physical RAM banks on the
* SA1100, it's much convenient to use Linux's SparseMEM support to implement
* our memory map representation. Assuming all memory nodes have equal access
--
2.0.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 3/3] ARM: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
2014-07-02 9:57 ` Uwe Kleine-König
(?)
(?)
@ 2014-07-02 9:57 ` Uwe Kleine-König
2014-07-02 10:35 ` Russell King - ARM Linux
-1 siblings, 1 reply; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-02 9:57 UTC (permalink / raw)
To: linux-arm-kernel
This fixes the following warning:
warning: (ARCH_MULTIPLATFORM && ARCH_INTEGRATOR && ARCH_SHMOBILE_LEGACY) selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU && (!ARCH_REALVIEW || !SPARSEMEM))
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
I'm not sure why ARCH_MULTIPLATFORM appears here. It depends on MMU,
isn't selectable at the same time as ARCH_REALVIEW and XIP_KERNEL
depends on !ARCH_MULTIPLATFORM.
An alternative for ARCH_SHMOBILE_LEGACY is to let it depend on MMU, too.
*shrug*
---
arch/arm/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6dab0604b911..ecfaf489cc95 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -320,7 +320,7 @@ config ARCH_MULTIPLATFORM
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
- select ARM_PATCH_PHYS_VIRT
+ select ARM_PATCH_PHYS_VIRT if MMU
select AUTO_ZRELADDR
select COMMON_CLK
select COMMON_CLK_VERSATILE
@@ -665,7 +665,7 @@ config ARCH_MSM
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
- select ARM_PATCH_PHYS_VIRT
+ select ARM_PATCH_PHYS_VIRT if MMU
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
--
2.0.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 3/3] ARM: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
2014-07-02 9:57 ` [PATCH 3/3] ARM: only select ARM_PATCH_PHYS_VIRT if MMU is enabled Uwe Kleine-König
@ 2014-07-02 10:35 ` Russell King - ARM Linux
2014-07-07 6:51 ` Uwe Kleine-König
0 siblings, 1 reply; 26+ messages in thread
From: Russell King - ARM Linux @ 2014-07-02 10:35 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 02, 2014 at 11:57:23AM +0200, Uwe Kleine-K?nig wrote:
> This fixes the following warning:
>
> warning: (ARCH_MULTIPLATFORM && ARCH_INTEGRATOR && ARCH_SHMOBILE_LEGACY) selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU && (!ARCH_REALVIEW || !SPARSEMEM))
>
> Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> ---
> I'm not sure why ARCH_MULTIPLATFORM appears here. It depends on MMU,
> isn't selectable at the same time as ARCH_REALVIEW and XIP_KERNEL
> depends on !ARCH_MULTIPLATFORM.
The message is extremely confusing. It would read better if those
&& were || - because ARM_PATCH_PHYS_VIRT is selected by
ARCH_MULTIPLATFORM _or_ ARCH_INTEGRATOR _or_ ARCH_SHMOBILE_LEGACY:
config ARCH_MULTIPLATFORM
select ARM_PATCH_PHYS_VIRT
config ARCH_INTEGRATOR
select ARM_PATCH_PHYS_VIRT
config ARCH_SHMOBILE_LEGACY
select ARM_PATCH_PHYS_VIRT
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-02 9:57 ` [PATCH 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h> Uwe Kleine-König
@ 2014-07-02 10:38 ` Russell King - ARM Linux
2014-07-02 16:15 ` Uwe Kleine-König
2014-07-07 7:13 ` [PATCH v2 " Uwe Kleine-König
1 sibling, 1 reply; 26+ messages in thread
From: Russell King - ARM Linux @ 2014-07-02 10:38 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 02, 2014 at 11:57:22AM +0200, Uwe Kleine-K?nig wrote:
> config PHYS_OFFSET
> hex "Physical address of main memory" if MMU
> - depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
> + depends on !ARM_PATCH_PHYS_VIRT
> default DRAM_BASE if !MMU
> + default 0x00000000 if ARCH_EBSA110 || EP93XX_SDCE3_SYNC_PHYS_OFFSET || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_IOP13XX || ARCH_KS8695 || (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
It would be nice to see a few \ characters in that long line.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-02 10:38 ` Russell King - ARM Linux
@ 2014-07-02 16:15 ` Uwe Kleine-König
2014-07-02 16:18 ` Russell King - ARM Linux
0 siblings, 1 reply; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-02 16:15 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 02, 2014 at 11:38:19AM +0100, Russell King - ARM Linux wrote:
> On Wed, Jul 02, 2014 at 11:57:22AM +0200, Uwe Kleine-K?nig wrote:
> > config PHYS_OFFSET
> > hex "Physical address of main memory" if MMU
> > - depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
> > + depends on !ARM_PATCH_PHYS_VIRT
> > default DRAM_BASE if !MMU
> > + default 0x00000000 if ARCH_EBSA110 || EP93XX_SDCE3_SYNC_PHYS_OFFSET || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_IOP13XX || ARCH_KS8695 || (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
>
> It would be nice to see a few \ characters in that long line.
Yeah, right.
Also note that there is an ARCH_FOOTBRIDGE while mach-footbridge is
selected by FOOTBRIDGE. Following up your comments to the footbridge
series one of them should be changed. (But I wonder which one.)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-02 16:15 ` Uwe Kleine-König
@ 2014-07-02 16:18 ` Russell King - ARM Linux
0 siblings, 0 replies; 26+ messages in thread
From: Russell King - ARM Linux @ 2014-07-02 16:18 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 02, 2014 at 06:15:23PM +0200, Uwe Kleine-K?nig wrote:
> On Wed, Jul 02, 2014 at 11:38:19AM +0100, Russell King - ARM Linux wrote:
> > On Wed, Jul 02, 2014 at 11:57:22AM +0200, Uwe Kleine-K?nig wrote:
> > > config PHYS_OFFSET
> > > hex "Physical address of main memory" if MMU
> > > - depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
> > > + depends on !ARM_PATCH_PHYS_VIRT
> > > default DRAM_BASE if !MMU
> > > + default 0x00000000 if ARCH_EBSA110 || EP93XX_SDCE3_SYNC_PHYS_OFFSET || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_IOP13XX || ARCH_KS8695 || (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
> >
> > It would be nice to see a few \ characters in that long line.
> Yeah, right.
>
> Also note that there is an ARCH_FOOTBRIDGE while mach-footbridge is
> selected by FOOTBRIDGE. Following up your comments to the footbridge
> series one of them should be changed. (But I wonder which one.)
Yes, I spotted that. It's was actually harmless, because CO285
also built mach-footbridge:
+ machine-$(CONFIG_FOOTBRIDGE) := footbridge
+ incdir-$(CONFIG_FOOTBRIDGE) := ebsa285
+textaddr-$(CONFIG_ARCH_CO285) := 0x60008000
+ machine-$(CONFIG_ARCH_CO285) := footbridge
+ incdir-$(CONFIG_ARCH_CO285) := ebsa285
which makes the machine- and incdir- for CO285 redundant... I'd
recommend changing that CONFIG_FOOTBRIDGE to CONFIG_ARCH_FOOTBRIDGE
because that's more conformant to the pattern which people expect.
--
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 3/3] ARM: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
2014-07-02 10:35 ` Russell King - ARM Linux
@ 2014-07-07 6:51 ` Uwe Kleine-König
0 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-07 6:51 UTC (permalink / raw)
To: Yann E. MORIN, linux-kbuild
Cc: kernel, linux-arm-kernel, Russell King - ARM Linux
Hello,
(adding Yann and linux-kbuild to recipents)
On Wed, Jul 02, 2014 at 11:35:12AM +0100, Russell King - ARM Linux wrote:
> On Wed, Jul 02, 2014 at 11:57:23AM +0200, Uwe Kleine-König wrote:
> > This fixes the following warning:
> >
> > warning: (ARCH_MULTIPLATFORM && ARCH_INTEGRATOR && ARCH_SHMOBILE_LEGACY) selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU && (!ARCH_REALVIEW || !SPARSEMEM))
> >
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > ---
> > I'm not sure why ARCH_MULTIPLATFORM appears here. It depends on MMU,
> > isn't selectable at the same time as ARCH_REALVIEW and XIP_KERNEL
> > depends on !ARCH_MULTIPLATFORM.
>
> The message is extremely confusing. It would read better if those
> && were || - because ARM_PATCH_PHYS_VIRT is selected by
> ARCH_MULTIPLATFORM _or_ ARCH_INTEGRATOR _or_ ARCH_SHMOBILE_LEGACY:
right, so there are two things that could be improved here. The
resolution I'd prefer is to make this two warnings:
ARCH_INTEGRATOR selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU)
ARCH_SHMOBILE_LEGACY selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU)
ARCH_REALVIEW cannot be selected at the same time as ARCH_INTEGRATOR or
ARCH_SHMOBILE_LEGACY, so that can be dropped. And as stated above
ARCH_MULTIPLATFORM isn't an issue.
This doesn't have the natural language problem that ARCH_MULTIPLATFORM
*and* ARCH_INTEGRATOR *and* ARCH_SHMOBILE_LEGACY all select
ARM_PATCH_PHYS_VIRT.
> config ARCH_MULTIPLATFORM
> select ARM_PATCH_PHYS_VIRT
>
> config ARCH_INTEGRATOR
> select ARM_PATCH_PHYS_VIRT
>
> config ARCH_SHMOBILE_LEGACY
> select ARM_PATCH_PHYS_VIRT
>
(For reference, the patch did:
- select ARM_PATCH_PHYS_VIRT
+ select ARM_PATCH_PHYS_VIRT if MMU
for ARCH_INTEGRATOR and ARCH_SHMOBILE_LEGACY)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 3/3] ARM: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
@ 2014-07-07 6:51 ` Uwe Kleine-König
0 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-07 6:51 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
(adding Yann and linux-kbuild to recipents)
On Wed, Jul 02, 2014 at 11:35:12AM +0100, Russell King - ARM Linux wrote:
> On Wed, Jul 02, 2014 at 11:57:23AM +0200, Uwe Kleine-K?nig wrote:
> > This fixes the following warning:
> >
> > warning: (ARCH_MULTIPLATFORM && ARCH_INTEGRATOR && ARCH_SHMOBILE_LEGACY) selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU && (!ARCH_REALVIEW || !SPARSEMEM))
> >
> > Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> > ---
> > I'm not sure why ARCH_MULTIPLATFORM appears here. It depends on MMU,
> > isn't selectable at the same time as ARCH_REALVIEW and XIP_KERNEL
> > depends on !ARCH_MULTIPLATFORM.
>
> The message is extremely confusing. It would read better if those
> && were || - because ARM_PATCH_PHYS_VIRT is selected by
> ARCH_MULTIPLATFORM _or_ ARCH_INTEGRATOR _or_ ARCH_SHMOBILE_LEGACY:
right, so there are two things that could be improved here. The
resolution I'd prefer is to make this two warnings:
ARCH_INTEGRATOR selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU)
ARCH_SHMOBILE_LEGACY selects ARM_PATCH_PHYS_VIRT which has unmet direct dependencies (!XIP_KERNEL && MMU)
ARCH_REALVIEW cannot be selected at the same time as ARCH_INTEGRATOR or
ARCH_SHMOBILE_LEGACY, so that can be dropped. And as stated above
ARCH_MULTIPLATFORM isn't an issue.
This doesn't have the natural language problem that ARCH_MULTIPLATFORM
*and* ARCH_INTEGRATOR *and* ARCH_SHMOBILE_LEGACY all select
ARM_PATCH_PHYS_VIRT.
> config ARCH_MULTIPLATFORM
> select ARM_PATCH_PHYS_VIRT
>
> config ARCH_INTEGRATOR
> select ARM_PATCH_PHYS_VIRT
>
> config ARCH_SHMOBILE_LEGACY
> select ARM_PATCH_PHYS_VIRT
>
(For reference, the patch did:
- select ARM_PATCH_PHYS_VIRT
+ select ARM_PATCH_PHYS_VIRT if MMU
for ARCH_INTEGRATOR and ARCH_SHMOBILE_LEGACY)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v2 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-02 9:57 ` [PATCH 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h> Uwe Kleine-König
2014-07-02 10:38 ` Russell King - ARM Linux
@ 2014-07-07 7:13 ` Uwe Kleine-König
2014-07-25 0:06 ` Russell King - ARM Linux
1 sibling, 1 reply; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-07 7:13 UTC (permalink / raw)
To: linux-arm-kernel
The platforms selecting NEED_MACH_MEMORY_H defined the start address of
their physical memory in the respective <mach/memory.h>. With
ARM_PATCH_PHYS_VIRT=y (which is quite common today) this is useless
though because the definition isn't used but determined dynamically.
So remove the definitions from all <mach/memory.h> and provide the
Kconfig symbol PHYS_OFFSET with the respective defaults in case
ARM_PATCH_PHYS_VIRT isn't enabled.
This allows to drop the dependency of PHYS_OFFSET on !NEED_MACH_MEMORY_H
which prevents compiling an integrator nommu-kernel.
(CONFIG_PAGE_OFFSET which has "default PHYS_OFFSET if !MMU" expanded to
"0x" because CONFIG_PHYS_OFFSET doesn't exist as INTEGRATOR selects
NEED_MACH_MEMORY_H.)
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
Changes since (implicit) v1:
- add line breaks in long select
arch/arm/Kconfig | 17 +++++++++++++++--
arch/arm/include/asm/memory.h | 6 ++----
arch/arm/mach-ebsa110/include/mach/memory.h | 5 -----
arch/arm/mach-ep93xx/include/mach/memory.h | 22 ----------------------
| 5 -----
arch/arm/mach-integrator/include/mach/memory.h | 5 -----
arch/arm/mach-iop13xx/include/mach/memory.h | 5 -----
arch/arm/mach-ks8695/include/mach/memory.h | 5 -----
arch/arm/mach-omap1/include/mach/memory.h | 5 -----
arch/arm/mach-realview/include/mach/memory.h | 11 -----------
arch/arm/mach-rpc/include/mach/memory.h | 5 -----
arch/arm/mach-s5pv210/include/mach/memory.h | 2 --
arch/arm/mach-sa1100/include/mach/memory.h | 5 -----
13 files changed, 17 insertions(+), 81 deletions(-)
delete mode 100644 arch/arm/mach-ep93xx/include/mach/memory.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 245058b3b0ef..44ed4a803d81 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -262,8 +262,22 @@ config NEED_MACH_MEMORY_H
config PHYS_OFFSET
hex "Physical address of main memory" if MMU
- depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
+ default 0x00000000 if ARCH_EBSA110 || \
+ EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
+ ARCH_FOOTBRIDGE || \
+ ARCH_INTEGRATOR || \
+ ARCH_IOP13XX || \
+ ARCH_KS8695 || \
+ (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+ default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
+ default 0x20000000 if ARCH_S5PV210
+ default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
+ default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
+ default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
+ default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
+ default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
help
Please provide the physical address corresponding to the
location of main memory in your system.
@@ -435,7 +449,6 @@ config ARCH_EP93XX
select ARM_VIC
select CLKDEV_LOOKUP
select CPU_ARM920T
- select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 2b751464d6ff..04ccf1c0a1af 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -150,13 +150,11 @@
/*
* PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
- * memory. This is used for XIP and NoMMU kernels, or by kernels which
- * have their own mach/memory.h. Assembly code must always use
+ * memory. This is used for XIP and NoMMU kernels, and on platforms that don't
+ * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use
* PLAT_PHYS_OFFSET and not PHYS_OFFSET.
*/
-#ifndef PLAT_PHYS_OFFSET
#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
-#endif
#ifndef __ASSEMBLY__
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
index 8e49066ad850..866f8a1c6ff7 100644
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -17,11 +17,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-/*
* Cache flushing area - SRAM
*/
#define FLUSH_BASE_PHYS 0x40000000
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
deleted file mode 100644
index c9400cf0051c..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xc0000000)
-#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xd0000000)
-#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xe0000000)
-#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET UL(0xf0000000)
-#else
-#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
-#endif
-
-#endif
--git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 5c6df377f969..6f2ecccdf323 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -59,11 +59,6 @@ extern unsigned long __bus_to_pfn(unsigned long);
*/
#define FLUSH_BASE 0xf9000000
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
#define FLUSH_BASE_PHYS 0x50000000
#endif
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index 334d5e271889..7268cb50ded0 100644
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -20,11 +20,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET)
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 7c032d0ab24a..59307e787588 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -3,11 +3,6 @@
#include <mach/hardware.h>
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
#ifndef __ASSEMBLY__
#if defined(CONFIG_ARCH_IOP13XX)
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 95e731a7ed6a..ab0d27fa8969 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -15,11 +15,6 @@
#include <mach/hardware.h>
-/*
- * Physical SRAM offset.
- */
-#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA
-
#ifndef __ASSEMBLY__
#ifdef CONFIG_PCI
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 3c2530523111..058a4f7d44c5 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -6,11 +6,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-
-/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index db09170e3832..eb69feb3b804 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -21,17 +21,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#define PLAT_PHYS_OFFSET UL(0x70000000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#endif
-
-#ifdef CONFIG_SPARSEMEM
-
-/*
* Sparsemem definitions for RealView PBX.
*
* The RealView PBX board has another block of 512MB of RAM at 0x20000000,
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
index 18a221093bf5..b7e49571417d 100644
--- a/arch/arm/mach-rpc/include/mach/memory.h
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -19,11 +19,6 @@
#define __ASM_ARCH_MEMORY_H
/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-
-/*
* Cache flushing area - ROM
*/
#define FLUSH_BASE_PHYS 0x00000000
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 2d3cfa221d5f..d584fac9156b 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
/*
* Sparsemem support
* Physical memory can be located from 0x20000000 to 0x7fffffff,
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index 12d376795abc..2054051eb797 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -10,11 +10,6 @@
#include <asm/sizes.h>
/*
- * Physical DRAM offset is 0xc0000000 on the SA1100
- */
-#define PLAT_PHYS_OFFSET UL(0xc0000000)
-
-/*
* Because of the wide memory address space between physical RAM banks on the
* SA1100, it's much convenient to use Linux's SparseMEM support to implement
* our memory map representation. Assuming all memory nodes have equal access
--
2.0.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
2014-07-02 9:57 ` Uwe Kleine-König
@ 2014-07-08 11:47 ` Tomasz Figa
-1 siblings, 0 replies; 26+ messages in thread
From: Tomasz Figa @ 2014-07-08 11:47 UTC (permalink / raw)
To: Uwe Kleine-König, linux-arm-kernel
Cc: kernel, Kukjin Kim, linux-samsung-soc
Hi Uwe,
On 02.07.2014 11:57, Uwe Kleine-König wrote:
> ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so <asm/memory.h> doesn't
> include <mach/memory.h> and so this file is not used and can go away.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: linux-samsung-soc@vger.kernel.org
> ---
> arch/arm/mach-exynos/include/mach/memory.h | 27 ---------------------------
> 1 file changed, 27 deletions(-)
> delete mode 100644 arch/arm/mach-exynos/include/mach/memory.h
Thanks for the patch.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
[boot tested on Exynos4412-based Trats2 board]
Tested-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-08 11:47 ` Tomasz Figa
0 siblings, 0 replies; 26+ messages in thread
From: Tomasz Figa @ 2014-07-08 11:47 UTC (permalink / raw)
To: linux-arm-kernel
Hi Uwe,
On 02.07.2014 11:57, Uwe Kleine-K?nig wrote:
> ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so <asm/memory.h> doesn't
> include <mach/memory.h> and so this file is not used and can go away.
>
> Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> ---
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: linux-samsung-soc at vger.kernel.org
> ---
> arch/arm/mach-exynos/include/mach/memory.h | 27 ---------------------------
> 1 file changed, 27 deletions(-)
> delete mode 100644 arch/arm/mach-exynos/include/mach/memory.h
Thanks for the patch.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
[boot tested on Exynos4412-based Trats2 board]
Tested-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
2014-07-02 9:57 ` Uwe Kleine-König
@ 2014-07-08 15:20 ` Sachin Kamat
-1 siblings, 0 replies; 26+ messages in thread
From: Sachin Kamat @ 2014-07-08 15:20 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: linux-arm-kernel, Sascha Hauer, Kukjin Kim, linux-samsung-soc
On Wed, Jul 2, 2014 at 3:27 PM, Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
> ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so <asm/memory.h> doesn't
> include <mach/memory.h> and so this file is not used and can go away.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com>
Tested on Arndale octa board (Exynos 5420).
Tested-by: Sachin Kamat <sachin.kamat@samsung.com>
--
Regards,
Sachin.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-08 15:20 ` Sachin Kamat
0 siblings, 0 replies; 26+ messages in thread
From: Sachin Kamat @ 2014-07-08 15:20 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 2, 2014 at 3:27 PM, Uwe Kleine-K?nig
<u.kleine-koenig@pengutronix.de> wrote:
> ARCH_EXYNOS doesn't select NEED_MACH_MEMORY_H, so <asm/memory.h> doesn't
> include <mach/memory.h> and so this file is not used and can go away.
>
> Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> ---
Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com>
Tested on Arndale octa board (Exynos 5420).
Tested-by: Sachin Kamat <sachin.kamat@samsung.com>
--
Regards,
Sachin.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
2014-07-02 9:57 ` Uwe Kleine-König
@ 2014-07-22 7:51 ` Uwe Kleine-König
-1 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-22 7:51 UTC (permalink / raw)
To: linux-arm-kernel, arm, Russell King; +Cc: linux-samsung-soc, Kukjin Kim, kernel
Hello,
who takes care of this series?
In fact they are all orthogonal to each other.
The first patch
ARM: exynos: remove unused <mach/memory.h>
has been reviewed and tested by Tomasz Figa and Sachin Kamat. Can the
Samsung people pick it up? Or armsoc?
Patch 2 (v2!)
ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
touches several arch/arm/mach-*/include/mach/memory.h and
arch/arm/Kconfig. armsoc? Russell?
Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
for Integrator and Renesas (non-multiplatform). armsoc?
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-22 7:51 ` Uwe Kleine-König
0 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-22 7:51 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
who takes care of this series?
In fact they are all orthogonal to each other.
The first patch
ARM: exynos: remove unused <mach/memory.h>
has been reviewed and tested by Tomasz Figa and Sachin Kamat. Can the
Samsung people pick it up? Or armsoc?
Patch 2 (v2!)
ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
touches several arch/arm/mach-*/include/mach/memory.h and
arch/arm/Kconfig. armsoc? Russell?
Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
for Integrator and Renesas (non-multiplatform). armsoc?
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
2014-07-22 7:51 ` Uwe Kleine-König
@ 2014-07-22 16:14 ` Olof Johansson
-1 siblings, 0 replies; 26+ messages in thread
From: Olof Johansson @ 2014-07-22 16:14 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: linux-arm-kernel, arm, Russell King, linux-samsung-soc,
Kukjin Kim, Sascha Hauer
On Tue, Jul 22, 2014 at 12:51 AM, Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> wrote:
> Hello,
>
> who takes care of this series?
>
> In fact they are all orthogonal to each other.
>
> The first patch
>
> ARM: exynos: remove unused <mach/memory.h>
>
> has been reviewed and tested by Tomasz Figa and Sachin Kamat. Can the
> Samsung people pick it up? Or armsoc?
Kukjin should apply this one.
> Patch 2 (v2!)
>
> ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
>
> touches several arch/arm/mach-*/include/mach/memory.h and
> arch/arm/Kconfig. armsoc? Russell?
This can go through either, but Russell has already reviewed it once
so send it to his patch tracker.
> Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
> for Integrator and Renesas (non-multiplatform). armsoc?
Don't know without seeing the patch. What's the patch subject so I can find it?
-Olof
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-22 16:14 ` Olof Johansson
0 siblings, 0 replies; 26+ messages in thread
From: Olof Johansson @ 2014-07-22 16:14 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 22, 2014 at 12:51 AM, Uwe Kleine-K?nig
<u.kleine-koenig@pengutronix.de> wrote:
> Hello,
>
> who takes care of this series?
>
> In fact they are all orthogonal to each other.
>
> The first patch
>
> ARM: exynos: remove unused <mach/memory.h>
>
> has been reviewed and tested by Tomasz Figa and Sachin Kamat. Can the
> Samsung people pick it up? Or armsoc?
Kukjin should apply this one.
> Patch 2 (v2!)
>
> ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
>
> touches several arch/arm/mach-*/include/mach/memory.h and
> arch/arm/Kconfig. armsoc? Russell?
This can go through either, but Russell has already reviewed it once
so send it to his patch tracker.
> Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
> for Integrator and Renesas (non-multiplatform). armsoc?
Don't know without seeing the patch. What's the patch subject so I can find it?
-Olof
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
2014-07-22 16:14 ` Olof Johansson
@ 2014-07-22 23:37 ` Kukjin Kim
-1 siblings, 0 replies; 26+ messages in thread
From: Kukjin Kim @ 2014-07-22 23:37 UTC (permalink / raw)
To: Olof Johansson
Cc: Uwe Kleine-König, linux-samsung-soc, Russell King, arm,
Sascha Hauer, Kukjin Kim, linux-arm-kernel
On 07/23/14 01:14, Olof Johansson wrote:
> On Tue, Jul 22, 2014 at 12:51 AM, Uwe Kleine-König
> <u.kleine-koenig@pengutronix.de> wrote:
>> Hello,
>>
>> who takes care of this series?
>>
>> In fact they are all orthogonal to each other.
>>
>> The first patch
>>
>> ARM: exynos: remove unused<mach/memory.h>
>>
>> has been reviewed and tested by Tomasz Figa and Sachin Kamat. Can the
>> Samsung people pick it up? Or armsoc?
>
> Kukjin should apply this one.
>
Oh, thanks for gentle reminder and I've applied into 2nd cleanup.
Thanks,
Kukjin
>> Patch 2 (v2!)
>>
>> ARM: remove remaining definitions of PLAT_PHYS_OFFSET from<mach/memory.h>
>>
>> touches several arch/arm/mach-*/include/mach/memory.h and
>> arch/arm/Kconfig. armsoc? Russell?
>
> This can go through either, but Russell has already reviewed it once
> so send it to his patch tracker.
>
>> Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
>> for Integrator and Renesas (non-multiplatform). armsoc?
>
> Don't know without seeing the patch. What's the patch subject so I can find it?
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-22 23:37 ` Kukjin Kim
0 siblings, 0 replies; 26+ messages in thread
From: Kukjin Kim @ 2014-07-22 23:37 UTC (permalink / raw)
To: linux-arm-kernel
On 07/23/14 01:14, Olof Johansson wrote:
> On Tue, Jul 22, 2014 at 12:51 AM, Uwe Kleine-K?nig
> <u.kleine-koenig@pengutronix.de> wrote:
>> Hello,
>>
>> who takes care of this series?
>>
>> In fact they are all orthogonal to each other.
>>
>> The first patch
>>
>> ARM: exynos: remove unused<mach/memory.h>
>>
>> has been reviewed and tested by Tomasz Figa and Sachin Kamat. Can the
>> Samsung people pick it up? Or armsoc?
>
> Kukjin should apply this one.
>
Oh, thanks for gentle reminder and I've applied into 2nd cleanup.
Thanks,
Kukjin
>> Patch 2 (v2!)
>>
>> ARM: remove remaining definitions of PLAT_PHYS_OFFSET from<mach/memory.h>
>>
>> touches several arch/arm/mach-*/include/mach/memory.h and
>> arch/arm/Kconfig. armsoc? Russell?
>
> This can go through either, but Russell has already reviewed it once
> so send it to his patch tracker.
>
>> Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
>> for Integrator and Renesas (non-multiplatform). armsoc?
>
> Don't know without seeing the patch. What's the patch subject so I can find it?
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
2014-07-22 16:14 ` Olof Johansson
@ 2014-07-23 19:58 ` Uwe Kleine-König
-1 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-23 19:58 UTC (permalink / raw)
To: Olof Johansson
Cc: linux-arm-kernel, arm, Russell King, linux-samsung-soc,
Kukjin Kim, Sascha Hauer
Hello,
On Tue, Jul 22, 2014 at 09:14:33AM -0700, Olof Johansson wrote:
> > Patch 2 (v2!)
> >
> > ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
> >
> > touches several arch/arm/mach-*/include/mach/memory.h and
> > arch/arm/Kconfig. armsoc? Russell?
>
> This can go through either, but Russell has already reviewed it once
> so send it to his patch tracker.
>
> > Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
> > for Integrator and Renesas (non-multiplatform). armsoc?
>
> Don't know without seeing the patch. What's the patch subject so I can find it?
I talked to Olof on irc. I sent patches 2 and 3 to the patch tracker as
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=8112/1
and
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=8113/1
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h>
@ 2014-07-23 19:58 ` Uwe Kleine-König
0 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-23 19:58 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Tue, Jul 22, 2014 at 09:14:33AM -0700, Olof Johansson wrote:
> > Patch 2 (v2!)
> >
> > ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
> >
> > touches several arch/arm/mach-*/include/mach/memory.h and
> > arch/arm/Kconfig. armsoc? Russell?
>
> This can go through either, but Russell has already reviewed it once
> so send it to his patch tracker.
>
> > Patch 3 fixes a warning regarding nommu and touches the Kconfig entry
> > for Integrator and Renesas (non-multiplatform). armsoc?
>
> Don't know without seeing the patch. What's the patch subject so I can find it?
I talked to Olof on irc. I sent patches 2 and 3 to the patch tracker as
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=8112/1
and
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=8113/1
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v2 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-07 7:13 ` [PATCH v2 " Uwe Kleine-König
@ 2014-07-25 0:06 ` Russell King - ARM Linux
2014-07-25 9:09 ` Uwe Kleine-König
0 siblings, 1 reply; 26+ messages in thread
From: Russell King - ARM Linux @ 2014-07-25 0:06 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jul 07, 2014 at 09:13:05AM +0200, Uwe Kleine-K?nig wrote:
> The platforms selecting NEED_MACH_MEMORY_H defined the start address of
> their physical memory in the respective <mach/memory.h>. With
> ARM_PATCH_PHYS_VIRT=y (which is quite common today) this is useless
> though because the definition isn't used but determined dynamically.
>
> So remove the definitions from all <mach/memory.h> and provide the
> Kconfig symbol PHYS_OFFSET with the respective defaults in case
> ARM_PATCH_PHYS_VIRT isn't enabled.
>
> This allows to drop the dependency of PHYS_OFFSET on !NEED_MACH_MEMORY_H
> which prevents compiling an integrator nommu-kernel.
> (CONFIG_PAGE_OFFSET which has "default PHYS_OFFSET if !MMU" expanded to
> "0x" because CONFIG_PHYS_OFFSET doesn't exist as INTEGRATOR selects
> NEED_MACH_MEMORY_H.)
Should I assume that this hasn't been build tested?
> diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
> index 2b751464d6ff..04ccf1c0a1af 100644
> --- a/arch/arm/include/asm/memory.h
> +++ b/arch/arm/include/asm/memory.h
> @@ -150,13 +150,11 @@
>
> /*
> * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
> - * memory. This is used for XIP and NoMMU kernels, or by kernels which
> - * have their own mach/memory.h. Assembly code must always use
> + * memory. This is used for XIP and NoMMU kernels, and on platforms that don't
> + * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use
> * PLAT_PHYS_OFFSET and not PHYS_OFFSET.
> */
> -#ifndef PLAT_PHYS_OFFSET
> #define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
> -#endif
So when CONFIG_PHYS_OFFSET is not defined, PLAT_PHYS_OFFSET becomes the
identifier "CONFIG_PHYS_OFFSETUL" here.
This leads our first error:
arch/arm/include/asm/memory.h:157:29: error: 'CONFIG_PHYS_OFFSETUL' undeclared (first use in this function)
> diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
> index db09170e3832..eb69feb3b804 100644
> --- a/arch/arm/mach-realview/include/mach/memory.h
> +++ b/arch/arm/mach-realview/include/mach/memory.h
> @@ -21,17 +21,6 @@
> #define __ASM_ARCH_MEMORY_H
>
> /*
> - * Physical DRAM offset.
> - */
> -#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
> -#define PLAT_PHYS_OFFSET UL(0x70000000)
> -#else
> -#define PLAT_PHYS_OFFSET UL(0x00000000)
> -#endif
> -
> -#ifdef CONFIG_SPARSEMEM
> -
> -/*
> * Sparsemem definitions for RealView PBX.
> *
> * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
This bit of the patch is obviously bollocks - you're removing the
#ifdef CONFIG_SPARSEMEM but its balancing #endif remains.
This gives us our second error:
arch/arm/mach-realview/include/mach/memory.h:62:2: error: #endif without #if
Olof's kbuilder found these, and I expect mine will find them in a bit
over an hours time, followed by the zero day stuff when it hits
linux-next (probably tomorrow.)
Submitting not very well tested patches now generates /lots/ of automated
build systems to find their errors. Don't do it. :)
(Hint: try building realview_defconfig and realview-smp_defconfig.)
--
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v2 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-25 0:06 ` Russell King - ARM Linux
@ 2014-07-25 9:09 ` Uwe Kleine-König
2014-07-25 12:21 ` Uwe Kleine-König
0 siblings, 1 reply; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-25 9:09 UTC (permalink / raw)
To: linux-arm-kernel
Hello Russell,
On Fri, Jul 25, 2014 at 01:06:22AM +0100, Russell King - ARM Linux wrote:
> On Mon, Jul 07, 2014 at 09:13:05AM +0200, Uwe Kleine-K?nig wrote:
> > The platforms selecting NEED_MACH_MEMORY_H defined the start address of
> > their physical memory in the respective <mach/memory.h>. With
> > ARM_PATCH_PHYS_VIRT=y (which is quite common today) this is useless
> > though because the definition isn't used but determined dynamically.
> >
> > So remove the definitions from all <mach/memory.h> and provide the
> > Kconfig symbol PHYS_OFFSET with the respective defaults in case
> > ARM_PATCH_PHYS_VIRT isn't enabled.
> >
> > This allows to drop the dependency of PHYS_OFFSET on !NEED_MACH_MEMORY_H
> > which prevents compiling an integrator nommu-kernel.
> > (CONFIG_PAGE_OFFSET which has "default PHYS_OFFSET if !MMU" expanded to
> > "0x" because CONFIG_PHYS_OFFSET doesn't exist as INTEGRATOR selects
> > NEED_MACH_MEMORY_H.)
>
> Should I assume that this hasn't been build tested?
darn, I admit being guilty not retesting it after rebasing to 3.16-rc. I
think I did test it when I wrote the patch the first time, but you made
me unsure if I tested all relevant cases. Working on a follow-up patch.
Mea culpa
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v2 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
2014-07-25 9:09 ` Uwe Kleine-König
@ 2014-07-25 12:21 ` Uwe Kleine-König
0 siblings, 0 replies; 26+ messages in thread
From: Uwe Kleine-König @ 2014-07-25 12:21 UTC (permalink / raw)
To: linux-arm-kernel
Hello Russell,
On Fri, Jul 25, 2014 at 11:09:12AM +0200, Uwe Kleine-K?nig wrote:
> On Fri, Jul 25, 2014 at 01:06:22AM +0100, Russell King - ARM Linux wrote:
> > On Mon, Jul 07, 2014 at 09:13:05AM +0200, Uwe Kleine-K?nig wrote:
> > > The platforms selecting NEED_MACH_MEMORY_H defined the start address of
> > > their physical memory in the respective <mach/memory.h>. With
> > > ARM_PATCH_PHYS_VIRT=y (which is quite common today) this is useless
> > > though because the definition isn't used but determined dynamically.
> > >
> > > So remove the definitions from all <mach/memory.h> and provide the
> > > Kconfig symbol PHYS_OFFSET with the respective defaults in case
> > > ARM_PATCH_PHYS_VIRT isn't enabled.
> > >
> > > This allows to drop the dependency of PHYS_OFFSET on !NEED_MACH_MEMORY_H
> > > which prevents compiling an integrator nommu-kernel.
> > > (CONFIG_PAGE_OFFSET which has "default PHYS_OFFSET if !MMU" expanded to
> > > "0x" because CONFIG_PHYS_OFFSET doesn't exist as INTEGRATOR selects
> > > NEED_MACH_MEMORY_H.)
> >
> > Should I assume that this hasn't been build tested?
> darn, I admit being guilty not retesting it after rebasing to 3.16-rc. I
> think I did test it when I wrote the patch the first time, but you made
> me unsure if I tested all relevant cases. Working on a follow-up patch.
The following patch fixes all defconfigs:
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index eb69feb3b804..23e7a313f75d 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -20,6 +20,8 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
+#ifdef CONFIG_SPARSEMEM
+
/*
* Sparsemem definitions for RealView PBX.
*
PLAT_PHYS_OFFSET then still has this strange value on builds with
ARM_PATCH_PHYS_VIRT=y, but this doesn't matter as the value is unused
then.
Do you squash this into the faulty patch or should I follow up with a
proper patch to repair the mess?
Sorry again
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply related [flat|nested] 26+ messages in thread
end of thread, other threads:[~2014-07-25 12:21 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-02 9:57 [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h> Uwe Kleine-König
2014-07-02 9:57 ` Uwe Kleine-König
2014-07-02 9:57 ` [PATCH 2/3] ARM: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h> Uwe Kleine-König
2014-07-02 10:38 ` Russell King - ARM Linux
2014-07-02 16:15 ` Uwe Kleine-König
2014-07-02 16:18 ` Russell King - ARM Linux
2014-07-07 7:13 ` [PATCH v2 " Uwe Kleine-König
2014-07-25 0:06 ` Russell King - ARM Linux
2014-07-25 9:09 ` Uwe Kleine-König
2014-07-25 12:21 ` Uwe Kleine-König
2014-07-02 9:57 ` [PATCH 3/3] ARM: only select ARM_PATCH_PHYS_VIRT if MMU is enabled Uwe Kleine-König
2014-07-02 10:35 ` Russell King - ARM Linux
2014-07-07 6:51 ` Uwe Kleine-König
2014-07-07 6:51 ` Uwe Kleine-König
2014-07-08 11:47 ` [PATCH 1/3] ARM: exynos: remove unused <mach/memory.h> Tomasz Figa
2014-07-08 11:47 ` Tomasz Figa
2014-07-08 15:20 ` Sachin Kamat
2014-07-08 15:20 ` Sachin Kamat
2014-07-22 7:51 ` Uwe Kleine-König
2014-07-22 7:51 ` Uwe Kleine-König
2014-07-22 16:14 ` Olof Johansson
2014-07-22 16:14 ` Olof Johansson
2014-07-22 23:37 ` Kukjin Kim
2014-07-22 23:37 ` Kukjin Kim
2014-07-23 19:58 ` Uwe Kleine-König
2014-07-23 19:58 ` Uwe Kleine-König
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.