[PATCH] virtio-rng: complete have_data completion in removing device

[PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

When we try to hot-remove a busy virtio-rng device from QEMU monitor,
the device can't be hot-removed. Because virtio-rng driver hangs at
wait_for_completion_killable().

This patch fixed the hang by completing have_data completion before
unregistering a virtio-rng device.

Signed-off-by: Amos Kong <akong@redhat.com>
Cc: stable@vger.kernel.org
---
 drivers/char/hw_random/virtio-rng.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 0027137..416b15c 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -137,6 +137,7 @@ static void remove_common(struct virtio_device *vdev)
 	struct virtrng_info *vi = vdev->priv;
 
 	vdev->config->reset(vdev);
+	complete(&vi->have_data);
 	vi->busy = false;
 	if (vi->hwrng_register_done)
 		hwrng_unregister(&vi->hwrng);
-- 
1.9.3

[PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

When we try to hot-remove a busy virtio-rng device from QEMU monitor,
the device can't be hot-removed. Because virtio-rng driver hangs at
wait_for_completion_killable().

This patch fixed the hang by completing have_data completion before
unregistering a virtio-rng device.

Signed-off-by: Amos Kong <akong@redhat.com>
Cc: stable@vger.kernel.org
---
 drivers/char/hw_random/virtio-rng.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 0027137..416b15c 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -137,6 +137,7 @@ static void remove_common(struct virtio_device *vdev)
 	struct virtrng_info *vi = vdev->priv;
 
 	vdev->config->reset(vdev);
+	complete(&vi->have_data);
 	vi->busy = false;
 	if (vi->hwrng_register_done)
 		hwrng_unregister(&vi->hwrng);
-- 
1.9.3

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> the device can't be hot-removed. Because virtio-rng driver hangs at
> wait_for_completion_killable().
> 
> This patch fixed the hang by completing have_data completion before
> unregistering a virtio-rng device.

Hi Amit,

Before applying this patch, it's blocking insider wait_for_completion_killable()                     
Applied this patch, wait_for_completion_killable() returns 0,
and vi->data_avail becomes 0, then rng_get_date() will return 0.

Is it expected result?

 
> Signed-off-by: Amos Kong <akong@redhat.com>
> Cc: stable@vger.kernel.org
> ---
>  drivers/char/hw_random/virtio-rng.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
> index 0027137..416b15c 100644
> --- a/drivers/char/hw_random/virtio-rng.c
> +++ b/drivers/char/hw_random/virtio-rng.c
> @@ -137,6 +137,7 @@ static void remove_common(struct virtio_device *vdev)
>  	struct virtrng_info *vi = vdev->priv;
>  
>  	vdev->config->reset(vdev);
> +	complete(&vi->have_data);
>  	vi->busy = false;
>  	if (vi->hwrng_register_done)
>  		hwrng_unregister(&vi->hwrng);
> -- 
> 1.9.3
> 
> _______________________________________________
> Virtualization mailing list
> Virtualization@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization

-- 
			Amos.

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> the device can't be hot-removed. Because virtio-rng driver hangs at
> wait_for_completion_killable().
> 
> This patch fixed the hang by completing have_data completion before
> unregistering a virtio-rng device.

Hi Amit,

Before applying this patch, it's blocking insider wait_for_completion_killable()                     
Applied this patch, wait_for_completion_killable() returns 0,
and vi->data_avail becomes 0, then rng_get_date() will return 0.

Is it expected result?

 
> Signed-off-by: Amos Kong <akong@redhat.com>
> Cc: stable@vger.kernel.org
> ---
>  drivers/char/hw_random/virtio-rng.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
> index 0027137..416b15c 100644
> --- a/drivers/char/hw_random/virtio-rng.c
> +++ b/drivers/char/hw_random/virtio-rng.c
> @@ -137,6 +137,7 @@ static void remove_common(struct virtio_device *vdev)
>  	struct virtrng_info *vi = vdev->priv;
>  
>  	vdev->config->reset(vdev);
> +	complete(&vi->have_data);
>  	vi->busy = false;
>  	if (vi->hwrng_register_done)
>  		hwrng_unregister(&vi->hwrng);
> -- 
> 1.9.3
> 
> _______________________________________________
> Virtualization mailing list
> Virtualization@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization

-- 
			Amos.

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amit Shah]

On (Wed) 06 Aug 2014 [16:05:41], Amos Kong wrote:
> On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> > When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> > the device can't be hot-removed. Because virtio-rng driver hangs at
> > wait_for_completion_killable().
> > 
> > This patch fixed the hang by completing have_data completion before
> > unregistering a virtio-rng device.
> 
> Hi Amit,
> 
> Before applying this patch, it's blocking insider wait_for_completion_killable()                     
> Applied this patch, wait_for_completion_killable() returns 0,
> and vi->data_avail becomes 0, then rng_get_date() will return 0.

Thanks for checking this.

> Is it expected result?

I think what will happen is vi->data_avail will be set to whatever it
was set last.  In case of a previous successful read request, the
data_avail will be set to whatever number of bytes the host gave.  On
doing a hot-unplug on the succeeding wait, the value in data_avail
will be re-used, and the hwrng core will wrongly take some bytes in
the buffer as input from the host.

So, I think we need to set vi->data_avail = 0; before calling
wait_event_completion_killable().

		Amit

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amit Shah]

On (Wed) 06 Aug 2014 [16:05:41], Amos Kong wrote:
> On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> > When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> > the device can't be hot-removed. Because virtio-rng driver hangs at
> > wait_for_completion_killable().
> > 
> > This patch fixed the hang by completing have_data completion before
> > unregistering a virtio-rng device.
> 
> Hi Amit,
> 
> Before applying this patch, it's blocking insider wait_for_completion_killable()                     
> Applied this patch, wait_for_completion_killable() returns 0,
> and vi->data_avail becomes 0, then rng_get_date() will return 0.

Thanks for checking this.

> Is it expected result?

I think what will happen is vi->data_avail will be set to whatever it
was set last.  In case of a previous successful read request, the
data_avail will be set to whatever number of bytes the host gave.  On
doing a hot-unplug on the succeeding wait, the value in data_avail
will be re-used, and the hwrng core will wrongly take some bytes in
the buffer as input from the host.

So, I think we need to set vi->data_avail = 0; before calling
wait_event_completion_killable().

		Amit

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

On Wed, Aug 06, 2014 at 01:55:29PM +0530, Amit Shah wrote:
> On (Wed) 06 Aug 2014 [16:05:41], Amos Kong wrote:
> > On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> > > When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> > > the device can't be hot-removed. Because virtio-rng driver hangs at
> > > wait_for_completion_killable().
> > > 
> > > This patch fixed the hang by completing have_data completion before
> > > unregistering a virtio-rng device.
> > 
> > Hi Amit,
> > 
> > Before applying this patch, it's blocking insider wait_for_completion_killable()                     
> > Applied this patch, wait_for_completion_killable() returns 0,
> > and vi->data_avail becomes 0, then rng_get_date() will return 0.
> 
> Thanks for checking this.
> 
> > Is it expected result?
> 
> I think what will happen is vi->data_avail will be set to whatever it
> was set last.  In case of a previous successful read request, the
> data_avail will be set to whatever number of bytes the host gave.  On
> doing a hot-unplug on the succeeding wait, the value in data_avail
> will be re-used, and the hwrng core will wrongly take some bytes in
> the buffer as input from the host.
> 
> So, I think we need to set vi->data_avail = 0; before calling
> wait_event_completion_killable().
> 
> 		Amit

In my latest debugging, I found the hang is caused by unexpected reading
when we started to remove the device.

I have two draft fix, 1) is skip unexpected reading by checking a
remove flag. 2) is unregistering device at the beginning of
remove_common(). I think second patch is better if it won't cause
new problem.

The original patch (complete in remove_common()) is still necessary.

Test results: hotplug issue disappeared (dd process will quit).


diff --git a/drivers/char/hw_random/virtio-rng.c
b/drivers/char/hw_random/virtio-rng.c
index 2e3139e..028797c 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -35,6 +35,7 @@ struct virtrng_info {
        unsigned int data_avail;
        int index;
        bool busy;
+        bool remove;
        bool hwrng_register_done;
 };
 
@@ -68,6 +69,9 @@ static int virtio_read(struct hwrng *rng, void *buf,
size_t size, bool wait)
        int ret;
        struct virtrng_info *vi = (struct virtrng_info *)rng->priv;
 
+        if (vi->remove)
+               return 0;
+
        if (!vi->busy) {
                vi->busy = true;
                init_completion(&vi->have_data);
@@ -137,6 +141,8 @@ static void remove_common(struct virtio_device
*vdev)
 {
        struct virtrng_info *vi = vdev->priv;
 
+       vi->remove = true;
+       complete(&vi->have_data);
        vdev->config->reset(vdev);
        vi->busy = false;
        if (vi->hwrng_register_done)


diff --git a/drivers/char/hw_random/virtio-rng.c
b/drivers/char/hw_random/virtio-rng.c
index 2e3139e..9b8c2ce 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -137,10 +137,11 @@ static void remove_common(struct virtio_device
*vdev)
 {
        struct virtrng_info *vi = vdev->priv;
 
-       vdev->config->reset(vdev);
-       vi->busy = false;
        if (vi->hwrng_register_done)
                hwrng_unregister(&vi->hwrng);
+       complete(&vi->have_data);
+       vdev->config->reset(vdev);
+       vi->busy = false;
        vdev->config->del_vqs(vdev);
        ida_simple_remove(&rng_index_ida, vi->index);
        kfree(vi);

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

On Wed, Aug 06, 2014 at 01:55:29PM +0530, Amit Shah wrote:
> On (Wed) 06 Aug 2014 [16:05:41], Amos Kong wrote:
> > On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> > > When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> > > the device can't be hot-removed. Because virtio-rng driver hangs at
> > > wait_for_completion_killable().
> > > 
> > > This patch fixed the hang by completing have_data completion before
> > > unregistering a virtio-rng device.
> > 
> > Hi Amit,
> > 
> > Before applying this patch, it's blocking insider wait_for_completion_killable()                     
> > Applied this patch, wait_for_completion_killable() returns 0,
> > and vi->data_avail becomes 0, then rng_get_date() will return 0.
> 
> Thanks for checking this.
> 
> > Is it expected result?
> 
> I think what will happen is vi->data_avail will be set to whatever it
> was set last.  In case of a previous successful read request, the
> data_avail will be set to whatever number of bytes the host gave.  On
> doing a hot-unplug on the succeeding wait, the value in data_avail
> will be re-used, and the hwrng core will wrongly take some bytes in
> the buffer as input from the host.
> 
> So, I think we need to set vi->data_avail = 0; before calling
> wait_event_completion_killable().
> 
> 		Amit

In my latest debugging, I found the hang is caused by unexpected reading
when we started to remove the device.

I have two draft fix, 1) is skip unexpected reading by checking a
remove flag. 2) is unregistering device at the beginning of
remove_common(). I think second patch is better if it won't cause
new problem.

The original patch (complete in remove_common()) is still necessary.

Test results: hotplug issue disappeared (dd process will quit).


diff --git a/drivers/char/hw_random/virtio-rng.c
b/drivers/char/hw_random/virtio-rng.c
index 2e3139e..028797c 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -35,6 +35,7 @@ struct virtrng_info {
        unsigned int data_avail;
        int index;
        bool busy;
+        bool remove;
        bool hwrng_register_done;
 };
 
@@ -68,6 +69,9 @@ static int virtio_read(struct hwrng *rng, void *buf,
size_t size, bool wait)
        int ret;
        struct virtrng_info *vi = (struct virtrng_info *)rng->priv;
 
+        if (vi->remove)
+               return 0;
+
        if (!vi->busy) {
                vi->busy = true;
                init_completion(&vi->have_data);
@@ -137,6 +141,8 @@ static void remove_common(struct virtio_device
*vdev)
 {
        struct virtrng_info *vi = vdev->priv;
 
+       vi->remove = true;
+       complete(&vi->have_data);
        vdev->config->reset(vdev);
        vi->busy = false;
        if (vi->hwrng_register_done)


diff --git a/drivers/char/hw_random/virtio-rng.c
b/drivers/char/hw_random/virtio-rng.c
index 2e3139e..9b8c2ce 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -137,10 +137,11 @@ static void remove_common(struct virtio_device
*vdev)
 {
        struct virtrng_info *vi = vdev->priv;
 
-       vdev->config->reset(vdev);
-       vi->busy = false;
        if (vi->hwrng_register_done)
                hwrng_unregister(&vi->hwrng);
+       complete(&vi->have_data);
+       vdev->config->reset(vdev);
+       vi->busy = false;
        vdev->config->del_vqs(vdev);
        ida_simple_remove(&rng_index_ida, vi->index);
        kfree(vi);

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

On Mon, Sep 08, 2014 at 11:29:51PM +0800, Amos Kong wrote:
> On Wed, Aug 06, 2014 at 01:55:29PM +0530, Amit Shah wrote:
> > On (Wed) 06 Aug 2014 [16:05:41], Amos Kong wrote:
> > > On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> > > > When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> > > > the device can't be hot-removed. Because virtio-rng driver hangs at
> > > > wait_for_completion_killable().
> > > > 
> > > > This patch fixed the hang by completing have_data completion before
> > > > unregistering a virtio-rng device.
> > > 
> > > Hi Amit,
> > > 
> > > Before applying this patch, it's blocking insider wait_for_completion_killable()                     
> > > Applied this patch, wait_for_completion_killable() returns 0,
> > > and vi->data_avail becomes 0, then rng_get_date() will return 0.
> > 
> > Thanks for checking this.
> > 
> > > Is it expected result?
> > 

Hi Amit

> > I think what will happen is vi->data_avail will be set to whatever it
> > was set last.  In case of a previous successful read request, the
> > data_avail will be set to whatever number of bytes the host gave.  On
> > doing a hot-unplug on the succeeding wait, the value in data_avail
> > will be re-used, and the hwrng core will wrongly take some bytes in
> > the buffer as input from the host.
> > 
> > So, I think we need to set vi->data_avail = 0; before calling
> > wait_event_completion_killable().

I finally understand content, we need to set vi->data_avail to 0
before returning virtio_read(), it might enter wait_event_completion_killable()
when we try to remove the device.

We call complete() in remove_common(), then wait_event_completion_killable()
will exit, but virtio_read() will be re-entered if the device still
isn't unregistered, then re-stuck inside wait_event_completion_killable().

I tested some complex condition (both quick/slow backend), I found
some problem in below two patches.

I will post another fix later. The test result is expected.

1. Hotplug remove virtio-rng0, dd process will exit with an error:
    "dd: error reading ‘/dev/hwrng’: Operation not permitted"
   virtio-rng0 disappear from 'info pci'
 
2. Re-read by dd, hotplug virtio-rng1, dd process exit with same
   error, virtio-rng1 disappear


Thanks, Amos

> > 
> > 		Amit
> 
> In my latest debugging, I found the hang is caused by unexpected reading
> when we started to remove the device.
> 
> I have two draft fix, 1) is skip unexpected reading by checking a
> remove flag. 2) is unregistering device at the beginning of
> remove_common(). I think second patch is better if it won't cause
> new problem.
> 
> The original patch (complete in remove_common()) is still necessary.
> 
> Test results: hotplug issue disappeared (dd process will quit).
> 
> 
> diff --git a/drivers/char/hw_random/virtio-rng.c
> b/drivers/char/hw_random/virtio-rng.c
> index 2e3139e..028797c 100644
> --- a/drivers/char/hw_random/virtio-rng.c
> +++ b/drivers/char/hw_random/virtio-rng.c
> @@ -35,6 +35,7 @@ struct virtrng_info {
>         unsigned int data_avail;
>         int index;
>         bool busy;
> +        bool remove;
>         bool hwrng_register_done;
>  };
>  
> @@ -68,6 +69,9 @@ static int virtio_read(struct hwrng *rng, void *buf,
> size_t size, bool wait)
>         int ret;
>         struct virtrng_info *vi = (struct virtrng_info *)rng->priv;
>  
> +        if (vi->remove)
> +               return 0;
> +
>         if (!vi->busy) {
>                 vi->busy = true;
>                 init_completion(&vi->have_data);
> @@ -137,6 +141,8 @@ static void remove_common(struct virtio_device
> *vdev)
>  {
>         struct virtrng_info *vi = vdev->priv;
>  
> +       vi->remove = true;
> +       complete(&vi->have_data);
>         vdev->config->reset(vdev);
>         vi->busy = false;
>         if (vi->hwrng_register_done)
> 
> 
> diff --git a/drivers/char/hw_random/virtio-rng.c
> b/drivers/char/hw_random/virtio-rng.c
> index 2e3139e..9b8c2ce 100644
> --- a/drivers/char/hw_random/virtio-rng.c
> +++ b/drivers/char/hw_random/virtio-rng.c
> @@ -137,10 +137,11 @@ static void remove_common(struct virtio_device
> *vdev)
>  {
>         struct virtrng_info *vi = vdev->priv;
>  
> -       vdev->config->reset(vdev);
> -       vi->busy = false;
>         if (vi->hwrng_register_done)
>                 hwrng_unregister(&vi->hwrng);
> +       complete(&vi->have_data);
> +       vdev->config->reset(vdev);
> +       vi->busy = false;
>         vdev->config->del_vqs(vdev);
>         ida_simple_remove(&rng_index_ida, vi->index);
>         kfree(vi);

Re: [PATCH] virtio-rng: complete have_data completion in removing device

[Amos Kong]

On Mon, Sep 08, 2014 at 11:29:51PM +0800, Amos Kong wrote:
> On Wed, Aug 06, 2014 at 01:55:29PM +0530, Amit Shah wrote:
> > On (Wed) 06 Aug 2014 [16:05:41], Amos Kong wrote:
> > > On Wed, Aug 06, 2014 at 01:35:15AM +0800, Amos Kong wrote:
> > > > When we try to hot-remove a busy virtio-rng device from QEMU monitor,
> > > > the device can't be hot-removed. Because virtio-rng driver hangs at
> > > > wait_for_completion_killable().
> > > > 
> > > > This patch fixed the hang by completing have_data completion before
> > > > unregistering a virtio-rng device.
> > > 
> > > Hi Amit,
> > > 
> > > Before applying this patch, it's blocking insider wait_for_completion_killable()                     
> > > Applied this patch, wait_for_completion_killable() returns 0,
> > > and vi->data_avail becomes 0, then rng_get_date() will return 0.
> > 
> > Thanks for checking this.
> > 
> > > Is it expected result?
> > 

Hi Amit

> > I think what will happen is vi->data_avail will be set to whatever it
> > was set last.  In case of a previous successful read request, the
> > data_avail will be set to whatever number of bytes the host gave.  On
> > doing a hot-unplug on the succeeding wait, the value in data_avail
> > will be re-used, and the hwrng core will wrongly take some bytes in
> > the buffer as input from the host.
> > 
> > So, I think we need to set vi->data_avail = 0; before calling
> > wait_event_completion_killable().

I finally understand content, we need to set vi->data_avail to 0
before returning virtio_read(), it might enter wait_event_completion_killable()
when we try to remove the device.

We call complete() in remove_common(), then wait_event_completion_killable()
will exit, but virtio_read() will be re-entered if the device still
isn't unregistered, then re-stuck inside wait_event_completion_killable().

I tested some complex condition (both quick/slow backend), I found
some problem in below two patches.

I will post another fix later. The test result is expected.

1. Hotplug remove virtio-rng0, dd process will exit with an error:
    "dd: error reading ‘/dev/hwrng’: Operation not permitted"
   virtio-rng0 disappear from 'info pci'
 
2. Re-read by dd, hotplug virtio-rng1, dd process exit with same
   error, virtio-rng1 disappear


Thanks, Amos

> > 
> > 		Amit
> 
> In my latest debugging, I found the hang is caused by unexpected reading
> when we started to remove the device.
> 
> I have two draft fix, 1) is skip unexpected reading by checking a
> remove flag. 2) is unregistering device at the beginning of
> remove_common(). I think second patch is better if it won't cause
> new problem.
> 
> The original patch (complete in remove_common()) is still necessary.
> 
> Test results: hotplug issue disappeared (dd process will quit).
> 
> 
> diff --git a/drivers/char/hw_random/virtio-rng.c
> b/drivers/char/hw_random/virtio-rng.c
> index 2e3139e..028797c 100644
> --- a/drivers/char/hw_random/virtio-rng.c
> +++ b/drivers/char/hw_random/virtio-rng.c
> @@ -35,6 +35,7 @@ struct virtrng_info {
>         unsigned int data_avail;
>         int index;
>         bool busy;
> +        bool remove;
>         bool hwrng_register_done;
>  };
>  
> @@ -68,6 +69,9 @@ static int virtio_read(struct hwrng *rng, void *buf,
> size_t size, bool wait)
>         int ret;
>         struct virtrng_info *vi = (struct virtrng_info *)rng->priv;
>  
> +        if (vi->remove)
> +               return 0;
> +
>         if (!vi->busy) {
>                 vi->busy = true;
>                 init_completion(&vi->have_data);
> @@ -137,6 +141,8 @@ static void remove_common(struct virtio_device
> *vdev)
>  {
>         struct virtrng_info *vi = vdev->priv;
>  
> +       vi->remove = true;
> +       complete(&vi->have_data);
>         vdev->config->reset(vdev);
>         vi->busy = false;
>         if (vi->hwrng_register_done)
> 
> 
> diff --git a/drivers/char/hw_random/virtio-rng.c
> b/drivers/char/hw_random/virtio-rng.c
> index 2e3139e..9b8c2ce 100644
> --- a/drivers/char/hw_random/virtio-rng.c
> +++ b/drivers/char/hw_random/virtio-rng.c
> @@ -137,10 +137,11 @@ static void remove_common(struct virtio_device
> *vdev)
>  {
>         struct virtrng_info *vi = vdev->priv;
>  
> -       vdev->config->reset(vdev);
> -       vi->busy = false;
>         if (vi->hwrng_register_done)
>                 hwrng_unregister(&vi->hwrng);
> +       complete(&vi->have_data);
> +       vdev->config->reset(vdev);
> +       vi->busy = false;
>         vdev->config->del_vqs(vdev);
>         ida_simple_remove(&rng_index_ida, vi->index);
>         kfree(vi);
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization