* [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support
@ 2014-09-04 2:28 Magnus Damm
2014-09-04 6:51 ` Simon Horman
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Magnus Damm @ 2014-09-04 2:28 UTC (permalink / raw)
To: linux-sh
From: Magnus Damm <damm+renesas@opensource.se>
Enable sh73a0 Multiplatform support for the generic sh73a0
machine vector. No board support is enabled, and the board
code for KZM9G DT Reference is left by itself.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
arch/arm/mach-shmobile/Kconfig | 5 +++++
arch/arm/mach-shmobile/Makefile | 4 ++--
arch/arm/mach-shmobile/setup-sh73a0.c | 5 ++++-
3 files changed, 11 insertions(+), 3 deletions(-)
--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2014-09-04 10:48:28.000000000 +0900
@@ -50,6 +50,11 @@ config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select SYS_SUPPORTS_SH_MTU2
+config ARCH_SH73A0
+ bool "SH-Mobile AG5 (R8A73A00)"
+ select ARCH_RMOBILE
+ select RENESAS_INTC_IRQPIN
+
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2014-09-04 10:48:28.000000000 +0900
@@ -7,7 +7,7 @@ obj-y := timer.o console.o
# CPU objects
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o pm-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
@@ -70,7 +70,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
-obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
+obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
--- 0002/arch/arm/mach-shmobile/setup-sh73a0.c
+++ work/arch/arm/mach-shmobile/setup-sh73a0.c 2014-09-04 10:59:10.000000000 +0900
@@ -757,7 +757,9 @@ void __init __weak sh73a0_register_twd(v
void __init sh73a0_earlytimer_init(void)
{
sh73a0_init_delay();
+#ifndef CONFIG_COMMON_CLK
sh73a0_clock_init();
+#endif
shmobile_earlytimer_init();
sh73a0_register_twd();
}
@@ -775,9 +777,10 @@ void __init sh73a0_add_early_devices(voi
void __init sh73a0_add_standard_devices_dt(void)
{
+#ifndef CONFIG_COMMON_CLK
/* clocks are setup late during boot in the case of DT */
sh73a0_clock_init();
-
+#endif
platform_add_devices(sh73a0_devices_dt,
ARRAY_SIZE(sh73a0_devices_dt));
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support
2014-09-04 2:28 [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support Magnus Damm
@ 2014-09-04 6:51 ` Simon Horman
2014-09-04 11:01 ` Magnus Damm
2014-09-04 12:20 ` Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2014-09-04 6:51 UTC (permalink / raw)
To: linux-sh
On Thu, Sep 04, 2014 at 11:28:56AM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Enable sh73a0 Multiplatform support for the generic sh73a0
> machine vector. No board support is enabled, and the board
> code for KZM9G DT Reference is left by itself.
This appears to overlap with:
[PATCH v2 03/10] ARM: shmobile: sh73a0: common clock framework board support
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> ---
>
> arch/arm/mach-shmobile/Kconfig | 5 +++++
> arch/arm/mach-shmobile/Makefile | 4 ++--
> arch/arm/mach-shmobile/setup-sh73a0.c | 5 ++++-
> 3 files changed, 11 insertions(+), 3 deletions(-)
>
> --- 0001/arch/arm/mach-shmobile/Kconfig
> +++ work/arch/arm/mach-shmobile/Kconfig 2014-09-04 10:48:28.000000000 +0900
> @@ -50,6 +50,11 @@ config ARCH_R7S72100
> bool "RZ/A1H (R7S72100)"
> select SYS_SUPPORTS_SH_MTU2
>
> +config ARCH_SH73A0
> + bool "SH-Mobile AG5 (R8A73A00)"
> + select ARCH_RMOBILE
> + select RENESAS_INTC_IRQPIN
> +
> config ARCH_R8A7740
> bool "R-Mobile A1 (R8A77400)"
> select ARCH_RMOBILE
> --- 0001/arch/arm/mach-shmobile/Makefile
> +++ work/arch/arm/mach-shmobile/Makefile 2014-09-04 10:48:28.000000000 +0900
> @@ -7,7 +7,7 @@ obj-y := timer.o console.o
>
> # CPU objects
> obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o pm-sh7372.o
> -obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
> +obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o pm-sh73a0.o
> obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
> obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
> obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
> @@ -70,7 +70,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.
> obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
> obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
> obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
> -obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
> +obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o intc-sh73a0.o
> obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
> endif
>
> --- 0002/arch/arm/mach-shmobile/setup-sh73a0.c
> +++ work/arch/arm/mach-shmobile/setup-sh73a0.c 2014-09-04 10:59:10.000000000 +0900
> @@ -757,7 +757,9 @@ void __init __weak sh73a0_register_twd(v
> void __init sh73a0_earlytimer_init(void)
> {
> sh73a0_init_delay();
> +#ifndef CONFIG_COMMON_CLK
> sh73a0_clock_init();
> +#endif
> shmobile_earlytimer_init();
> sh73a0_register_twd();
> }
> @@ -775,9 +777,10 @@ void __init sh73a0_add_early_devices(voi
>
> void __init sh73a0_add_standard_devices_dt(void)
> {
> +#ifndef CONFIG_COMMON_CLK
> /* clocks are setup late during boot in the case of DT */
> sh73a0_clock_init();
> -
> +#endif
> platform_add_devices(sh73a0_devices_dt,
> ARRAY_SIZE(sh73a0_devices_dt));
> of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support
2014-09-04 2:28 [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support Magnus Damm
2014-09-04 6:51 ` Simon Horman
@ 2014-09-04 11:01 ` Magnus Damm
2014-09-04 12:20 ` Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Magnus Damm @ 2014-09-04 11:01 UTC (permalink / raw)
To: linux-sh
Hi Simon,
On Thu, Sep 4, 2014 at 3:51 PM, Simon Horman <horms@verge.net.au> wrote:
> On Thu, Sep 04, 2014 at 11:28:56AM +0900, Magnus Damm wrote:
>> From: Magnus Damm <damm+renesas@opensource.se>
>>
>> Enable sh73a0 Multiplatform support for the generic sh73a0
>> machine vector. No board support is enabled, and the board
>> code for KZM9G DT Reference is left by itself.
>
> This appears to overlap with:
>
> [PATCH v2 03/10] ARM: shmobile: sh73a0: common clock framework board support
So it seems. I propose that Ulrich will focus on getting the sh73a0
drivers/clk bits merged, while I fix up the generic sh73a0
multiplatform support in parallel.
Can you make sure the CMT bits get sorted out independently?
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support
2014-09-04 2:28 [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support Magnus Damm
2014-09-04 6:51 ` Simon Horman
2014-09-04 11:01 ` Magnus Damm
@ 2014-09-04 12:20 ` Simon Horman
2 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2014-09-04 12:20 UTC (permalink / raw)
To: linux-sh
On Thu, Sep 04, 2014 at 08:01:53PM +0900, Magnus Damm wrote:
> Hi Simon,
>
> On Thu, Sep 4, 2014 at 3:51 PM, Simon Horman <horms@verge.net.au> wrote:
> > On Thu, Sep 04, 2014 at 11:28:56AM +0900, Magnus Damm wrote:
> >> From: Magnus Damm <damm+renesas@opensource.se>
> >>
> >> Enable sh73a0 Multiplatform support for the generic sh73a0
> >> machine vector. No board support is enabled, and the board
> >> code for KZM9G DT Reference is left by itself.
> >
> > This appears to overlap with:
> >
> > [PATCH v2 03/10] ARM: shmobile: sh73a0: common clock framework board support
>
> So it seems. I propose that Ulrich will focus on getting the sh73a0
> drivers/clk bits merged, while I fix up the generic sh73a0
> multiplatform support in parallel.
>
> Can you make sure the CMT bits get sorted out independently?
Ok. So the implication is that I can take this series once
you've respun it for the minor #ifdef problem that I pointed out
earlier today?
Sure, but it can't be entirely independent as the CMT need a clock.
I believe there are two options.
1. Add CMT first, using legacy clocks.
Then later update it to use CCF.
2. Add CMT after CCF
Which to you prefer?
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-09-04 12:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-04 2:28 [PATCH 02/03] ARM: shmobile: sh73a0: Add Multiplatform support Magnus Damm
2014-09-04 6:51 ` Simon Horman
2014-09-04 11:01 ` Magnus Damm
2014-09-04 12:20 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.