* Fw: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
@ 2014-09-23 11:50 Mauro Carvalho Chehab
2014-09-23 12:00 ` Antti Palosaari
0 siblings, 1 reply; 6+ messages in thread
From: Mauro Carvalho Chehab @ 2014-09-23 11:50 UTC (permalink / raw)
To: Antti Palosaari; +Cc: linux-media, Bimow Chen
Antti,
After the firmware load changes, is this patch still applicable?
Regards,
Mauro
Forwarded message:
Date: Tue, 05 Aug 2014 13:48:03 +0800
From: Bimow Chen <Bimow.Chen@ite.com.tw>
To: linux-media@vger.kernel.org
Subject: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
>From b19fa868ce937a6ef10f1591a49b2a7ad14964a9 Mon Sep 17 00:00:00 2001
From: Bimow Chen <Bimow.Chen@ite.com.tw>
Date: Tue, 5 Aug 2014 11:20:53 +0800
Subject: [PATCH 4/4] Add sleep for firmware ready.
Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
---
drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 7b9b75f..a450cdb 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -602,6 +602,8 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
if (ret < 0)
goto err;
+ msleep(30);
+
/* firmware loaded, request boot */
req.cmd = CMD_FW_BOOT;
ret = af9035_ctrl_msg(d, &req);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: Fw: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
2014-09-23 11:50 Fw: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready Mauro Carvalho Chehab
@ 2014-09-23 12:00 ` Antti Palosaari
2014-09-23 13:11 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 6+ messages in thread
From: Antti Palosaari @ 2014-09-23 12:00 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: linux-media, Bimow Chen
I am not sure as I cannot reproduce it. Also 30ms wait here is long as
hell, whilst it is not critical.
When I look that firmware downloading from the 1-2 month old Hauppauge
driver sniffs, it is not there:
That line is CMD_FW_BOOT, command 0x23 it is 3rd number:
#define CMD_FW_BOOT 0x23
000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
Here is whole sequence:
000311: OUT: 000000 ms 001489 ms BULK[00002] >>> 15 00 29 99 03 01 00
01 57 f7 09 02 6d 6c 02 4f 9f 02 4f a2 0b 16
000312: OUT: 000001 ms 001489 ms BULK[00081] <<< 04 99 00 66 ff
000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
000314: OUT: 000011 ms 001490 ms BULK[00081] <<< 04 9a 00 65 ff
000315: OUT: 000000 ms 001501 ms BULK[00002] >>> 0b 00 00 9b 01 02 00
00 12 22 40 ec
000316: OUT: 000000 ms 001501 ms BULK[00081] <<< 05 9b 00 02 62 ff
So windows driver waits 10ms after boot, not before.
Due to these reasons, I would like to skip that patch until I see error
or get good explanation why it is needed and so.
regards
Antti
On 09/23/2014 02:50 PM, Mauro Carvalho Chehab wrote:
> Antti,
>
> After the firmware load changes, is this patch still applicable?
>
> Regards,
> Mauro
>
> Forwarded message:
>
> Date: Tue, 05 Aug 2014 13:48:03 +0800
> From: Bimow Chen <Bimow.Chen@ite.com.tw>
> To: linux-media@vger.kernel.org
> Subject: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
>
>
> From b19fa868ce937a6ef10f1591a49b2a7ad14964a9 Mon Sep 17 00:00:00 2001
> From: Bimow Chen <Bimow.Chen@ite.com.tw>
> Date: Tue, 5 Aug 2014 11:20:53 +0800
> Subject: [PATCH 4/4] Add sleep for firmware ready.
>
>
> Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
> ---
> drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
> index 7b9b75f..a450cdb 100644
> --- a/drivers/media/usb/dvb-usb-v2/af9035.c
> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
> @@ -602,6 +602,8 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
> if (ret < 0)
> goto err;
>
> + msleep(30);
> +
> /* firmware loaded, request boot */
> req.cmd = CMD_FW_BOOT;
> ret = af9035_ctrl_msg(d, &req);
>
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
2014-09-23 12:00 ` Antti Palosaari
@ 2014-09-23 13:11 ` Mauro Carvalho Chehab
2014-09-24 3:47 ` Bimow.Chen
0 siblings, 1 reply; 6+ messages in thread
From: Mauro Carvalho Chehab @ 2014-09-23 13:11 UTC (permalink / raw)
To: Antti Palosaari; +Cc: linux-media, Bimow Chen
Em Tue, 23 Sep 2014 15:00:48 +0300
Antti Palosaari <crope@iki.fi> escreveu:
> I am not sure as I cannot reproduce it. Also 30ms wait here is long as
> hell, whilst it is not critical.
>
> When I look that firmware downloading from the 1-2 month old Hauppauge
> driver sniffs, it is not there:
>
> That line is CMD_FW_BOOT, command 0x23 it is 3rd number:
> #define CMD_FW_BOOT 0x23
> 000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
>
> Here is whole sequence:
> 000311: OUT: 000000 ms 001489 ms BULK[00002] >>> 15 00 29 99 03 01 00
> 01 57 f7 09 02 6d 6c 02 4f 9f 02 4f a2 0b 16
> 000312: OUT: 000001 ms 001489 ms BULK[00081] <<< 04 99 00 66 ff
> 000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
> 000314: OUT: 000011 ms 001490 ms BULK[00081] <<< 04 9a 00 65 ff
> 000315: OUT: 000000 ms 001501 ms BULK[00002] >>> 0b 00 00 9b 01 02 00
> 00 12 22 40 ec
> 000316: OUT: 000000 ms 001501 ms BULK[00081] <<< 05 9b 00 02 62 ff
>
>
> So windows driver waits 10ms after boot, not before.
>
> Due to these reasons, I would like to skip that patch until I see error
> or get good explanation why it is needed and so.
Ok. I'll tag it as RFC then.
>
>
> regards
> Antti
>
>
> On 09/23/2014 02:50 PM, Mauro Carvalho Chehab wrote:
> > Antti,
> >
> > After the firmware load changes, is this patch still applicable?
> >
> > Regards,
> > Mauro
> >
> > Forwarded message:
> >
> > Date: Tue, 05 Aug 2014 13:48:03 +0800
> > From: Bimow Chen <Bimow.Chen@ite.com.tw>
> > To: linux-media@vger.kernel.org
> > Subject: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
> >
> >
> > From b19fa868ce937a6ef10f1591a49b2a7ad14964a9 Mon Sep 17 00:00:00 2001
> > From: Bimow Chen <Bimow.Chen@ite.com.tw>
> > Date: Tue, 5 Aug 2014 11:20:53 +0800
> > Subject: [PATCH 4/4] Add sleep for firmware ready.
> >
> >
> > Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
> > ---
> > drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++
> > 1 files changed, 2 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
> > index 7b9b75f..a450cdb 100644
> > --- a/drivers/media/usb/dvb-usb-v2/af9035.c
> > +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
> > @@ -602,6 +602,8 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
> > if (ret < 0)
> > goto err;
> >
> > + msleep(30);
> > +
> > /* firmware loaded, request boot */
> > req.cmd = CMD_FW_BOOT;
> > ret = af9035_ctrl_msg(d, &req);
> >
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
2014-09-23 13:11 ` Mauro Carvalho Chehab
@ 2014-09-24 3:47 ` Bimow.Chen
2014-09-24 19:18 ` Antti Palosaari
0 siblings, 1 reply; 6+ messages in thread
From: Bimow.Chen @ 2014-09-24 3:47 UTC (permalink / raw)
To: mchehab, crope; +Cc: linux-media
Hi all,
It's my mistake. Sleep after boot for firmware ready, not before.
Please reject this patch.
Thank you.
Best regards,
Bimow
-----Original Message-----
From: Mauro Carvalho Chehab [mailto:mchehab@osg.samsung.com]
Sent: Tuesday, September 23, 2014 9:11 PM
To: Antti Palosaari
Cc: linux-media@vger.kernel.org; Bimow Chen (陳心懋)
Subject: Re: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
Em Tue, 23 Sep 2014 15:00:48 +0300
Antti Palosaari <crope@iki.fi> escreveu:
> I am not sure as I cannot reproduce it. Also 30ms wait here is long as
> hell, whilst it is not critical.
>
> When I look that firmware downloading from the 1-2 month old Hauppauge
> driver sniffs, it is not there:
>
> That line is CMD_FW_BOOT, command 0x23 it is 3rd number:
> #define CMD_FW_BOOT 0x23
> 000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
>
> Here is whole sequence:
> 000311: OUT: 000000 ms 001489 ms BULK[00002] >>> 15 00 29 99 03 01 00
> 01 57 f7 09 02 6d 6c 02 4f 9f 02 4f a2 0b 16
> 000312: OUT: 000001 ms 001489 ms BULK[00081] <<< 04 99 00 66 ff
> 000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
> 000314: OUT: 000011 ms 001490 ms BULK[00081] <<< 04 9a 00 65 ff
> 000315: OUT: 000000 ms 001501 ms BULK[00002] >>> 0b 00 00 9b 01 02 00
> 00 12 22 40 ec
> 000316: OUT: 000000 ms 001501 ms BULK[00081] <<< 05 9b 00 02 62 ff
>
>
> So windows driver waits 10ms after boot, not before.
>
> Due to these reasons, I would like to skip that patch until I see
> error or get good explanation why it is needed and so.
Ok. I'll tag it as RFC then.
>
>
> regards
> Antti
>
>
> On 09/23/2014 02:50 PM, Mauro Carvalho Chehab wrote:
> > Antti,
> >
> > After the firmware load changes, is this patch still applicable?
> >
> > Regards,
> > Mauro
> >
> > Forwarded message:
> >
> > Date: Tue, 05 Aug 2014 13:48:03 +0800
> > From: Bimow Chen <Bimow.Chen@ite.com.tw>
> > To: linux-media@vger.kernel.org
> > Subject: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
> >
> >
> > From b19fa868ce937a6ef10f1591a49b2a7ad14964a9 Mon Sep 17 00:00:00
> > 2001
> > From: Bimow Chen <Bimow.Chen@ite.com.tw>
> > Date: Tue, 5 Aug 2014 11:20:53 +0800
> > Subject: [PATCH 4/4] Add sleep for firmware ready.
> >
> >
> > Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
> > ---
> > drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++
> > 1 files changed, 2 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c
> > b/drivers/media/usb/dvb-usb-v2/af9035.c
> > index 7b9b75f..a450cdb 100644
> > --- a/drivers/media/usb/dvb-usb-v2/af9035.c
> > +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
> > @@ -602,6 +602,8 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
> > if (ret < 0)
> > goto err;
> >
> > + msleep(30);
> > +
> > /* firmware loaded, request boot */
> > req.cmd = CMD_FW_BOOT;
> > ret = af9035_ctrl_msg(d, &req);
> >
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
2014-09-24 3:47 ` Bimow.Chen
@ 2014-09-24 19:18 ` Antti Palosaari
0 siblings, 0 replies; 6+ messages in thread
From: Antti Palosaari @ 2014-09-24 19:18 UTC (permalink / raw)
To: Bimow.Chen, mchehab; +Cc: linux-media
After looking it again, the 10ms delay seen in sniff is between boot
request and reply. Looks like it took 10ms from chip to reply boot
command. But there is no any other delays before nor after booth
command. If some small extra delay is really needed for Linux, but not
Windows, it indicates linux USB stack or driver is more optimal having
less delays.
regards
Antti
On 09/24/2014 06:47 AM, Bimow.Chen@ite.com.tw wrote:
> Hi all,
>
> It's my mistake. Sleep after boot for firmware ready, not before.
> Please reject this patch.
> Thank you.
>
> Best regards,
> Bimow
> -----Original Message-----
> From: Mauro Carvalho Chehab [mailto:mchehab@osg.samsung.com]
> Sent: Tuesday, September 23, 2014 9:11 PM
> To: Antti Palosaari
> Cc: linux-media@vger.kernel.org; Bimow Chen (陳心懋)
> Subject: Re: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
>
> Em Tue, 23 Sep 2014 15:00:48 +0300
> Antti Palosaari <crope@iki.fi> escreveu:
>
>> I am not sure as I cannot reproduce it. Also 30ms wait here is long as
>> hell, whilst it is not critical.
>>
>> When I look that firmware downloading from the 1-2 month old Hauppauge
>> driver sniffs, it is not there:
>>
>> That line is CMD_FW_BOOT, command 0x23 it is 3rd number:
>> #define CMD_FW_BOOT 0x23
>> 000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
>>
>> Here is whole sequence:
>> 000311: OUT: 000000 ms 001489 ms BULK[00002] >>> 15 00 29 99 03 01 00
>> 01 57 f7 09 02 6d 6c 02 4f 9f 02 4f a2 0b 16
>> 000312: OUT: 000001 ms 001489 ms BULK[00081] <<< 04 99 00 66 ff
>> 000313: OUT: 000000 ms 001490 ms BULK[00002] >>> 05 00 23 9a 65 dc
>> 000314: OUT: 000011 ms 001490 ms BULK[00081] <<< 04 9a 00 65 ff
>> 000315: OUT: 000000 ms 001501 ms BULK[00002] >>> 0b 00 00 9b 01 02 00
>> 00 12 22 40 ec
>> 000316: OUT: 000000 ms 001501 ms BULK[00081] <<< 05 9b 00 02 62 ff
>>
>>
>> So windows driver waits 10ms after boot, not before.
>>
>> Due to these reasons, I would like to skip that patch until I see
>> error or get good explanation why it is needed and so.
>
> Ok. I'll tag it as RFC then.
>
>>
>>
>> regards
>> Antti
>>
>>
>> On 09/23/2014 02:50 PM, Mauro Carvalho Chehab wrote:
>>> Antti,
>>>
>>> After the firmware load changes, is this patch still applicable?
>>>
>>> Regards,
>>> Mauro
>>>
>>> Forwarded message:
>>>
>>> Date: Tue, 05 Aug 2014 13:48:03 +0800
>>> From: Bimow Chen <Bimow.Chen@ite.com.tw>
>>> To: linux-media@vger.kernel.org
>>> Subject: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
>>>
>>>
>>> From b19fa868ce937a6ef10f1591a49b2a7ad14964a9 Mon Sep 17 00:00:00
>>> 2001
>>> From: Bimow Chen <Bimow.Chen@ite.com.tw>
>>> Date: Tue, 5 Aug 2014 11:20:53 +0800
>>> Subject: [PATCH 4/4] Add sleep for firmware ready.
>>>
>>>
>>> Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
>>> ---
>>> drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++
>>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c
>>> b/drivers/media/usb/dvb-usb-v2/af9035.c
>>> index 7b9b75f..a450cdb 100644
>>> --- a/drivers/media/usb/dvb-usb-v2/af9035.c
>>> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
>>> @@ -602,6 +602,8 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
>>> if (ret < 0)
>>> goto err;
>>>
>>> + msleep(30);
>>> +
>>> /* firmware loaded, request boot */
>>> req.cmd = CMD_FW_BOOT;
>>> ret = af9035_ctrl_msg(d, &req);
>>>
>>
--
http://palosaari.fi/
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 4/4] V4L/DVB: Add sleep for firmware ready
@ 2014-08-05 5:48 Bimow Chen
0 siblings, 0 replies; 6+ messages in thread
From: Bimow Chen @ 2014-08-05 5:48 UTC (permalink / raw)
To: linux-media
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: 0004-Add-sleep-for-firmware-ready.patch --]
[-- Type: text/x-patch, Size: 804 bytes --]
>From b19fa868ce937a6ef10f1591a49b2a7ad14964a9 Mon Sep 17 00:00:00 2001
From: Bimow Chen <Bimow.Chen@ite.com.tw>
Date: Tue, 5 Aug 2014 11:20:53 +0800
Subject: [PATCH 4/4] Add sleep for firmware ready.
Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
---
drivers/media/usb/dvb-usb-v2/af9035.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 7b9b75f..a450cdb 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -602,6 +602,8 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
if (ret < 0)
goto err;
+ msleep(30);
+
/* firmware loaded, request boot */
req.cmd = CMD_FW_BOOT;
ret = af9035_ctrl_msg(d, &req);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-09-24 19:18 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-23 11:50 Fw: [PATCH 4/4] V4L/DVB: Add sleep for firmware ready Mauro Carvalho Chehab
2014-09-23 12:00 ` Antti Palosaari
2014-09-23 13:11 ` Mauro Carvalho Chehab
2014-09-24 3:47 ` Bimow.Chen
2014-09-24 19:18 ` Antti Palosaari
-- strict thread matches above, loose matches on Subject: below --
2014-08-05 5:48 Bimow Chen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.