* [PATCH v3] zsmalloc: merge size_class to reduce fragmentation
@ 2014-09-26 6:27 ` Joonsoo Kim
0 siblings, 0 replies; 6+ messages in thread
From: Joonsoo Kim @ 2014-09-26 6:27 UTC (permalink / raw)
To: Andrew Morton, Minchan Kim
Cc: Nitin Gupta, linux-mm, linux-kernel, Jerome Marchand,
Sergey Senozhatsky, Dan Streetman, Luigi Semenzato, juno.choi,
seungho1.park, Joonsoo Kim
zsmalloc has many size_classes to reduce fragmentation and they are
in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096.
And, zsmalloc has constraint that each zspage has 4 pages at maximum.
In this situation, we can see interesting aspect.
Let's think about size_class for 1488, 1472, ..., 1376.
To prevent external fragmentation, they uses 4 pages per zspage and
so all they can contain 11 objects at maximum.
16384 (4096 * 4) = 1488 * 11 + remains
16384 (4096 * 4) = 1472 * 11 + remains
16384 (4096 * 4) = ...
16384 (4096 * 4) = 1376 * 11 + remains
It means that they have same characteristics and classification between
them isn't needed. If we use one size_class for them, we can reduce
fragementation and save some memory since both the 1488 and 1472 sized
classes can only fit 11 objects into 4 pages, and an object that's
1472 bytes can fit into an object that's 1488 bytes, merging these
classes to always use objects that are 1488 bytes will reduce the total
number of size classes. And reducing the total number of size classes
reduces overall fragmentation, because a wider range of compressed pages
can fit into a single size class, leaving less unused objects in each
size class.
For this purpose, this patch implement size_class merging. If there is
size_class that have same pages_per_zspage and same number of objects
per zspage with previous size_class, we don't create new size_class.
Instead, we use previous, same characteristic size_class. With this way,
above example sizes (1488, 1472, ..., 1376) use just one size_class
so we can get much more memory utilization.
Below is result of my simple test.
TEST ENV: EXT4 on zram, mount with discard option
WORKLOAD: untar kernel source code, remove directory in descending order
in size. (drivers arch fs sound include net Documentation firmware
kernel tools)
Each line represents orig_data_size, compr_data_size, mem_used_total,
fragmentation overhead (mem_used - compr_data_size) and overhead ratio
(overhead to compr_data_size), respectively, after untar and remove
operation is executed.
* untar-nomerge.out
orig_size compr_size used_size overhead overhead_ratio
525.88MB 199.16MB 210.23MB 11.08MB 5.56%
288.32MB 97.43MB 105.63MB 8.20MB 8.41%
177.32MB 61.12MB 69.40MB 8.28MB 13.55%
146.47MB 47.32MB 56.10MB 8.78MB 18.55%
124.16MB 38.85MB 48.41MB 9.55MB 24.58%
103.93MB 31.68MB 40.93MB 9.25MB 29.21%
84.34MB 22.86MB 32.72MB 9.86MB 43.13%
66.87MB 14.83MB 23.83MB 9.00MB 60.70%
60.67MB 11.11MB 18.60MB 7.49MB 67.48%
55.86MB 8.83MB 16.61MB 7.77MB 88.03%
53.32MB 8.01MB 15.32MB 7.31MB 91.24%
* untar-merge.out
orig_size compr_size used_size overhead overhead_ratio
526.23MB 199.18MB 209.81MB 10.64MB 5.34%
288.68MB 97.45MB 104.08MB 6.63MB 6.80%
177.68MB 61.14MB 66.93MB 5.79MB 9.47%
146.83MB 47.34MB 52.79MB 5.45MB 11.51%
124.52MB 38.87MB 44.30MB 5.43MB 13.96%
104.29MB 31.70MB 36.83MB 5.13MB 16.19%
84.70MB 22.88MB 27.92MB 5.04MB 22.04%
67.11MB 14.83MB 19.26MB 4.43MB 29.86%
60.82MB 11.10MB 14.90MB 3.79MB 34.17%
55.90MB 8.82MB 12.61MB 3.79MB 42.97%
53.32MB 8.01MB 11.73MB 3.73MB 46.53%
As you can see above result, merged one has better utilization (overhead
ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
Changes from v1:
- More commit description about what to do in this patch.
- Remove nr_obj in size_class, because it isn't need after initialization.
- Rename __size_class to size_class, size_class to merged_size_class.
- Add code comment for merged_size_class of struct zs_pool.
- Add code comment how merging works in zs_create_pool().
Changes from v2:
- Add more commit description (Dan)
- dynamically allocate size_class structure (Dan)
- rename objs_per_zspage to get_maxobj_per_zspage (Minchan)
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
---
mm/zsmalloc.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 60 insertions(+), 14 deletions(-)
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index c4a9157..836e8f8 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -187,6 +187,7 @@ enum fullness_group {
static const int fullness_threshold_frac = 4;
struct size_class {
+ int ref;
/*
* Size of objects stored in this class. Must be multiple
* of ZS_ALIGN.
@@ -214,7 +215,7 @@ struct link_free {
};
struct zs_pool {
- struct size_class size_class[ZS_SIZE_CLASSES];
+ struct size_class *size_class[ZS_SIZE_CLASSES];
gfp_t flags; /* allocation flags used when growing pool */
atomic_long_t pages_allocated;
@@ -468,7 +469,7 @@ static enum fullness_group fix_fullness_group(struct zs_pool *pool,
if (newfg == currfg)
goto out;
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
remove_zspage(page, class, currfg);
insert_zspage(page, class, newfg);
set_zspage_mapping(page, class_idx, newfg);
@@ -929,6 +930,23 @@ fail:
return notifier_to_errno(ret);
}
+static unsigned int get_maxobj_per_zspage(int size, int pages_per_zspage)
+{
+ return pages_per_zspage * PAGE_SIZE / size;
+}
+
+static bool can_merge(struct size_class *prev, int size, int pages_per_zspage)
+{
+ if (prev->pages_per_zspage != pages_per_zspage)
+ return false;
+
+ if (get_maxobj_per_zspage(prev->size, prev->pages_per_zspage)
+ != get_maxobj_per_zspage(size, pages_per_zspage))
+ return false;
+
+ return true;
+}
+
/**
* zs_create_pool - Creates an allocation pool to work from.
* @flags: allocation flags used to allocate pool metadata
@@ -949,20 +967,46 @@ struct zs_pool *zs_create_pool(gfp_t flags)
if (!pool)
return NULL;
- for (i = 0; i < ZS_SIZE_CLASSES; i++) {
+ /*
+ * Iterate reversly, because, size of size_class that we want to use
+ * for merging should be larger or equal to current size.
+ */
+ for (i = ZS_SIZE_CLASSES - 1; i >= 0; i--) {
int size;
+ int pages_per_zspage;
struct size_class *class;
+ struct size_class *prev_class;
size = ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA;
if (size > ZS_MAX_ALLOC_SIZE)
size = ZS_MAX_ALLOC_SIZE;
+ pages_per_zspage = get_pages_per_zspage(size);
- class = &pool->size_class[i];
+ /*
+ * size_class is used for normal zsmalloc operation such
+ * as alloc/free for that size. Although it is natural that we
+ * have one size_class for each size, there is a chance that we
+ * can get more memory utilization if we use one size_class for
+ * many different sizes whose size_class have same
+ * characteristics. So, we makes size_class point to
+ * previous size_class if possible.
+ */
+ if (i < ZS_SIZE_CLASSES - 1) {
+ prev_class = pool->size_class[i + 1];
+ if (can_merge(prev_class, size, pages_per_zspage)) {
+ pool->size_class[i] = prev_class;
+ prev_class->ref++;
+ continue;
+ }
+ }
+
+ class = kzalloc(sizeof(struct size_class), GFP_KERNEL);
+ class->ref = 1;
class->size = size;
class->index = i;
+ class->pages_per_zspage = pages_per_zspage;
spin_lock_init(&class->lock);
- class->pages_per_zspage = get_pages_per_zspage(size);
-
+ pool->size_class[i] = class;
}
pool->flags = flags;
@@ -977,7 +1021,11 @@ void zs_destroy_pool(struct zs_pool *pool)
for (i = 0; i < ZS_SIZE_CLASSES; i++) {
int fg;
- struct size_class *class = &pool->size_class[i];
+ struct size_class *class = pool->size_class[i];
+
+ class->ref--;
+ if (class->ref)
+ continue;
for (fg = 0; fg < _ZS_NR_FULLNESS_GROUPS; fg++) {
if (class->fullness_list[fg]) {
@@ -985,6 +1033,7 @@ void zs_destroy_pool(struct zs_pool *pool)
class->size, fg);
}
}
+ kfree(class);
}
kfree(pool);
}
@@ -1003,7 +1052,6 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
{
unsigned long obj;
struct link_free *link;
- int class_idx;
struct size_class *class;
struct page *first_page, *m_page;
@@ -1012,9 +1060,7 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
if (unlikely(!size || size > ZS_MAX_ALLOC_SIZE))
return 0;
- class_idx = get_size_class_index(size);
- class = &pool->size_class[class_idx];
- BUG_ON(class_idx != class->index);
+ class = pool->size_class[get_size_class_index(size)];
spin_lock(&class->lock);
first_page = find_get_zspage(class);
@@ -1067,7 +1113,7 @@ void zs_free(struct zs_pool *pool, unsigned long obj)
first_page = get_first_page(f_page);
get_zspage_mapping(first_page, &class_idx, &fullness);
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
f_offset = obj_idx_to_offset(f_page, f_objidx, class->size);
spin_lock(&class->lock);
@@ -1128,7 +1174,7 @@ void *zs_map_object(struct zs_pool *pool, unsigned long handle,
obj_handle_to_location(handle, &page, &obj_idx);
get_zspage_mapping(get_first_page(page), &class_idx, &fg);
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
off = obj_idx_to_offset(page, obj_idx, class->size);
area = &get_cpu_var(zs_map_area);
@@ -1162,7 +1208,7 @@ void zs_unmap_object(struct zs_pool *pool, unsigned long handle)
obj_handle_to_location(handle, &page, &obj_idx);
get_zspage_mapping(get_first_page(page), &class_idx, &fg);
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
off = obj_idx_to_offset(page, obj_idx, class->size);
area = this_cpu_ptr(&zs_map_area);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3] zsmalloc: merge size_class to reduce fragmentation
@ 2014-09-26 6:27 ` Joonsoo Kim
0 siblings, 0 replies; 6+ messages in thread
From: Joonsoo Kim @ 2014-09-26 6:27 UTC (permalink / raw)
To: Andrew Morton, Minchan Kim
Cc: Nitin Gupta, linux-mm, linux-kernel, Jerome Marchand,
Sergey Senozhatsky, Dan Streetman, Luigi Semenzato, juno.choi,
seungho1.park, Joonsoo Kim
zsmalloc has many size_classes to reduce fragmentation and they are
in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096.
And, zsmalloc has constraint that each zspage has 4 pages at maximum.
In this situation, we can see interesting aspect.
Let's think about size_class for 1488, 1472, ..., 1376.
To prevent external fragmentation, they uses 4 pages per zspage and
so all they can contain 11 objects at maximum.
16384 (4096 * 4) = 1488 * 11 + remains
16384 (4096 * 4) = 1472 * 11 + remains
16384 (4096 * 4) = ...
16384 (4096 * 4) = 1376 * 11 + remains
It means that they have same characteristics and classification between
them isn't needed. If we use one size_class for them, we can reduce
fragementation and save some memory since both the 1488 and 1472 sized
classes can only fit 11 objects into 4 pages, and an object that's
1472 bytes can fit into an object that's 1488 bytes, merging these
classes to always use objects that are 1488 bytes will reduce the total
number of size classes. And reducing the total number of size classes
reduces overall fragmentation, because a wider range of compressed pages
can fit into a single size class, leaving less unused objects in each
size class.
For this purpose, this patch implement size_class merging. If there is
size_class that have same pages_per_zspage and same number of objects
per zspage with previous size_class, we don't create new size_class.
Instead, we use previous, same characteristic size_class. With this way,
above example sizes (1488, 1472, ..., 1376) use just one size_class
so we can get much more memory utilization.
Below is result of my simple test.
TEST ENV: EXT4 on zram, mount with discard option
WORKLOAD: untar kernel source code, remove directory in descending order
in size. (drivers arch fs sound include net Documentation firmware
kernel tools)
Each line represents orig_data_size, compr_data_size, mem_used_total,
fragmentation overhead (mem_used - compr_data_size) and overhead ratio
(overhead to compr_data_size), respectively, after untar and remove
operation is executed.
* untar-nomerge.out
orig_size compr_size used_size overhead overhead_ratio
525.88MB 199.16MB 210.23MB 11.08MB 5.56%
288.32MB 97.43MB 105.63MB 8.20MB 8.41%
177.32MB 61.12MB 69.40MB 8.28MB 13.55%
146.47MB 47.32MB 56.10MB 8.78MB 18.55%
124.16MB 38.85MB 48.41MB 9.55MB 24.58%
103.93MB 31.68MB 40.93MB 9.25MB 29.21%
84.34MB 22.86MB 32.72MB 9.86MB 43.13%
66.87MB 14.83MB 23.83MB 9.00MB 60.70%
60.67MB 11.11MB 18.60MB 7.49MB 67.48%
55.86MB 8.83MB 16.61MB 7.77MB 88.03%
53.32MB 8.01MB 15.32MB 7.31MB 91.24%
* untar-merge.out
orig_size compr_size used_size overhead overhead_ratio
526.23MB 199.18MB 209.81MB 10.64MB 5.34%
288.68MB 97.45MB 104.08MB 6.63MB 6.80%
177.68MB 61.14MB 66.93MB 5.79MB 9.47%
146.83MB 47.34MB 52.79MB 5.45MB 11.51%
124.52MB 38.87MB 44.30MB 5.43MB 13.96%
104.29MB 31.70MB 36.83MB 5.13MB 16.19%
84.70MB 22.88MB 27.92MB 5.04MB 22.04%
67.11MB 14.83MB 19.26MB 4.43MB 29.86%
60.82MB 11.10MB 14.90MB 3.79MB 34.17%
55.90MB 8.82MB 12.61MB 3.79MB 42.97%
53.32MB 8.01MB 11.73MB 3.73MB 46.53%
As you can see above result, merged one has better utilization (overhead
ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
Changes from v1:
- More commit description about what to do in this patch.
- Remove nr_obj in size_class, because it isn't need after initialization.
- Rename __size_class to size_class, size_class to merged_size_class.
- Add code comment for merged_size_class of struct zs_pool.
- Add code comment how merging works in zs_create_pool().
Changes from v2:
- Add more commit description (Dan)
- dynamically allocate size_class structure (Dan)
- rename objs_per_zspage to get_maxobj_per_zspage (Minchan)
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
---
mm/zsmalloc.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 60 insertions(+), 14 deletions(-)
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index c4a9157..836e8f8 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -187,6 +187,7 @@ enum fullness_group {
static const int fullness_threshold_frac = 4;
struct size_class {
+ int ref;
/*
* Size of objects stored in this class. Must be multiple
* of ZS_ALIGN.
@@ -214,7 +215,7 @@ struct link_free {
};
struct zs_pool {
- struct size_class size_class[ZS_SIZE_CLASSES];
+ struct size_class *size_class[ZS_SIZE_CLASSES];
gfp_t flags; /* allocation flags used when growing pool */
atomic_long_t pages_allocated;
@@ -468,7 +469,7 @@ static enum fullness_group fix_fullness_group(struct zs_pool *pool,
if (newfg == currfg)
goto out;
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
remove_zspage(page, class, currfg);
insert_zspage(page, class, newfg);
set_zspage_mapping(page, class_idx, newfg);
@@ -929,6 +930,23 @@ fail:
return notifier_to_errno(ret);
}
+static unsigned int get_maxobj_per_zspage(int size, int pages_per_zspage)
+{
+ return pages_per_zspage * PAGE_SIZE / size;
+}
+
+static bool can_merge(struct size_class *prev, int size, int pages_per_zspage)
+{
+ if (prev->pages_per_zspage != pages_per_zspage)
+ return false;
+
+ if (get_maxobj_per_zspage(prev->size, prev->pages_per_zspage)
+ != get_maxobj_per_zspage(size, pages_per_zspage))
+ return false;
+
+ return true;
+}
+
/**
* zs_create_pool - Creates an allocation pool to work from.
* @flags: allocation flags used to allocate pool metadata
@@ -949,20 +967,46 @@ struct zs_pool *zs_create_pool(gfp_t flags)
if (!pool)
return NULL;
- for (i = 0; i < ZS_SIZE_CLASSES; i++) {
+ /*
+ * Iterate reversly, because, size of size_class that we want to use
+ * for merging should be larger or equal to current size.
+ */
+ for (i = ZS_SIZE_CLASSES - 1; i >= 0; i--) {
int size;
+ int pages_per_zspage;
struct size_class *class;
+ struct size_class *prev_class;
size = ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA;
if (size > ZS_MAX_ALLOC_SIZE)
size = ZS_MAX_ALLOC_SIZE;
+ pages_per_zspage = get_pages_per_zspage(size);
- class = &pool->size_class[i];
+ /*
+ * size_class is used for normal zsmalloc operation such
+ * as alloc/free for that size. Although it is natural that we
+ * have one size_class for each size, there is a chance that we
+ * can get more memory utilization if we use one size_class for
+ * many different sizes whose size_class have same
+ * characteristics. So, we makes size_class point to
+ * previous size_class if possible.
+ */
+ if (i < ZS_SIZE_CLASSES - 1) {
+ prev_class = pool->size_class[i + 1];
+ if (can_merge(prev_class, size, pages_per_zspage)) {
+ pool->size_class[i] = prev_class;
+ prev_class->ref++;
+ continue;
+ }
+ }
+
+ class = kzalloc(sizeof(struct size_class), GFP_KERNEL);
+ class->ref = 1;
class->size = size;
class->index = i;
+ class->pages_per_zspage = pages_per_zspage;
spin_lock_init(&class->lock);
- class->pages_per_zspage = get_pages_per_zspage(size);
-
+ pool->size_class[i] = class;
}
pool->flags = flags;
@@ -977,7 +1021,11 @@ void zs_destroy_pool(struct zs_pool *pool)
for (i = 0; i < ZS_SIZE_CLASSES; i++) {
int fg;
- struct size_class *class = &pool->size_class[i];
+ struct size_class *class = pool->size_class[i];
+
+ class->ref--;
+ if (class->ref)
+ continue;
for (fg = 0; fg < _ZS_NR_FULLNESS_GROUPS; fg++) {
if (class->fullness_list[fg]) {
@@ -985,6 +1033,7 @@ void zs_destroy_pool(struct zs_pool *pool)
class->size, fg);
}
}
+ kfree(class);
}
kfree(pool);
}
@@ -1003,7 +1052,6 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
{
unsigned long obj;
struct link_free *link;
- int class_idx;
struct size_class *class;
struct page *first_page, *m_page;
@@ -1012,9 +1060,7 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
if (unlikely(!size || size > ZS_MAX_ALLOC_SIZE))
return 0;
- class_idx = get_size_class_index(size);
- class = &pool->size_class[class_idx];
- BUG_ON(class_idx != class->index);
+ class = pool->size_class[get_size_class_index(size)];
spin_lock(&class->lock);
first_page = find_get_zspage(class);
@@ -1067,7 +1113,7 @@ void zs_free(struct zs_pool *pool, unsigned long obj)
first_page = get_first_page(f_page);
get_zspage_mapping(first_page, &class_idx, &fullness);
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
f_offset = obj_idx_to_offset(f_page, f_objidx, class->size);
spin_lock(&class->lock);
@@ -1128,7 +1174,7 @@ void *zs_map_object(struct zs_pool *pool, unsigned long handle,
obj_handle_to_location(handle, &page, &obj_idx);
get_zspage_mapping(get_first_page(page), &class_idx, &fg);
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
off = obj_idx_to_offset(page, obj_idx, class->size);
area = &get_cpu_var(zs_map_area);
@@ -1162,7 +1208,7 @@ void zs_unmap_object(struct zs_pool *pool, unsigned long handle)
obj_handle_to_location(handle, &page, &obj_idx);
get_zspage_mapping(get_first_page(page), &class_idx, &fg);
- class = &pool->size_class[class_idx];
+ class = pool->size_class[class_idx];
off = obj_idx_to_offset(page, obj_idx, class->size);
area = this_cpu_ptr(&zs_map_area);
--
1.7.9.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] zsmalloc: merge size_class to reduce fragmentation
2014-09-26 6:27 ` Joonsoo Kim
@ 2014-09-26 20:48 ` Dan Streetman
-1 siblings, 0 replies; 6+ messages in thread
From: Dan Streetman @ 2014-09-26 20:48 UTC (permalink / raw)
To: Joonsoo Kim
Cc: Andrew Morton, Minchan Kim, Nitin Gupta, Linux-MM, linux-kernel,
Jerome Marchand, Sergey Senozhatsky, Luigi Semenzato, juno.choi,
seungho1.park
On Fri, Sep 26, 2014 at 2:27 AM, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote:
> zsmalloc has many size_classes to reduce fragmentation and they are
> in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096.
> And, zsmalloc has constraint that each zspage has 4 pages at maximum.
>
> In this situation, we can see interesting aspect.
> Let's think about size_class for 1488, 1472, ..., 1376.
> To prevent external fragmentation, they uses 4 pages per zspage and
> so all they can contain 11 objects at maximum.
>
> 16384 (4096 * 4) = 1488 * 11 + remains
> 16384 (4096 * 4) = 1472 * 11 + remains
> 16384 (4096 * 4) = ...
> 16384 (4096 * 4) = 1376 * 11 + remains
>
> It means that they have same characteristics and classification between
> them isn't needed. If we use one size_class for them, we can reduce
> fragementation and save some memory since both the 1488 and 1472 sized
> classes can only fit 11 objects into 4 pages, and an object that's
> 1472 bytes can fit into an object that's 1488 bytes, merging these
> classes to always use objects that are 1488 bytes will reduce the total
> number of size classes. And reducing the total number of size classes
> reduces overall fragmentation, because a wider range of compressed pages
> can fit into a single size class, leaving less unused objects in each
> size class.
>
> For this purpose, this patch implement size_class merging. If there is
> size_class that have same pages_per_zspage and same number of objects
> per zspage with previous size_class, we don't create new size_class.
> Instead, we use previous, same characteristic size_class. With this way,
> above example sizes (1488, 1472, ..., 1376) use just one size_class
> so we can get much more memory utilization.
>
> Below is result of my simple test.
>
> TEST ENV: EXT4 on zram, mount with discard option
> WORKLOAD: untar kernel source code, remove directory in descending order
> in size. (drivers arch fs sound include net Documentation firmware
> kernel tools)
>
> Each line represents orig_data_size, compr_data_size, mem_used_total,
> fragmentation overhead (mem_used - compr_data_size) and overhead ratio
> (overhead to compr_data_size), respectively, after untar and remove
> operation is executed.
>
> * untar-nomerge.out
>
> orig_size compr_size used_size overhead overhead_ratio
> 525.88MB 199.16MB 210.23MB 11.08MB 5.56%
> 288.32MB 97.43MB 105.63MB 8.20MB 8.41%
> 177.32MB 61.12MB 69.40MB 8.28MB 13.55%
> 146.47MB 47.32MB 56.10MB 8.78MB 18.55%
> 124.16MB 38.85MB 48.41MB 9.55MB 24.58%
> 103.93MB 31.68MB 40.93MB 9.25MB 29.21%
> 84.34MB 22.86MB 32.72MB 9.86MB 43.13%
> 66.87MB 14.83MB 23.83MB 9.00MB 60.70%
> 60.67MB 11.11MB 18.60MB 7.49MB 67.48%
> 55.86MB 8.83MB 16.61MB 7.77MB 88.03%
> 53.32MB 8.01MB 15.32MB 7.31MB 91.24%
>
> * untar-merge.out
>
> orig_size compr_size used_size overhead overhead_ratio
> 526.23MB 199.18MB 209.81MB 10.64MB 5.34%
> 288.68MB 97.45MB 104.08MB 6.63MB 6.80%
> 177.68MB 61.14MB 66.93MB 5.79MB 9.47%
> 146.83MB 47.34MB 52.79MB 5.45MB 11.51%
> 124.52MB 38.87MB 44.30MB 5.43MB 13.96%
> 104.29MB 31.70MB 36.83MB 5.13MB 16.19%
> 84.70MB 22.88MB 27.92MB 5.04MB 22.04%
> 67.11MB 14.83MB 19.26MB 4.43MB 29.86%
> 60.82MB 11.10MB 14.90MB 3.79MB 34.17%
> 55.90MB 8.82MB 12.61MB 3.79MB 42.97%
> 53.32MB 8.01MB 11.73MB 3.73MB 46.53%
>
> As you can see above result, merged one has better utilization (overhead
> ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
>
> Changes from v1:
> - More commit description about what to do in this patch.
> - Remove nr_obj in size_class, because it isn't need after initialization.
> - Rename __size_class to size_class, size_class to merged_size_class.
> - Add code comment for merged_size_class of struct zs_pool.
> - Add code comment how merging works in zs_create_pool().
>
> Changes from v2:
> - Add more commit description (Dan)
> - dynamically allocate size_class structure (Dan)
> - rename objs_per_zspage to get_maxobj_per_zspage (Minchan)
>
> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
> ---
> mm/zsmalloc.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 60 insertions(+), 14 deletions(-)
>
> diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
> index c4a9157..836e8f8 100644
> --- a/mm/zsmalloc.c
> +++ b/mm/zsmalloc.c
> @@ -187,6 +187,7 @@ enum fullness_group {
> static const int fullness_threshold_frac = 4;
>
> struct size_class {
> + int ref;
> /*
> * Size of objects stored in this class. Must be multiple
> * of ZS_ALIGN.
> @@ -214,7 +215,7 @@ struct link_free {
> };
>
> struct zs_pool {
> - struct size_class size_class[ZS_SIZE_CLASSES];
> + struct size_class *size_class[ZS_SIZE_CLASSES];
>
> gfp_t flags; /* allocation flags used when growing pool */
> atomic_long_t pages_allocated;
> @@ -468,7 +469,7 @@ static enum fullness_group fix_fullness_group(struct zs_pool *pool,
> if (newfg == currfg)
> goto out;
>
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> remove_zspage(page, class, currfg);
> insert_zspage(page, class, newfg);
> set_zspage_mapping(page, class_idx, newfg);
> @@ -929,6 +930,23 @@ fail:
> return notifier_to_errno(ret);
> }
>
> +static unsigned int get_maxobj_per_zspage(int size, int pages_per_zspage)
> +{
> + return pages_per_zspage * PAGE_SIZE / size;
> +}
> +
> +static bool can_merge(struct size_class *prev, int size, int pages_per_zspage)
> +{
> + if (prev->pages_per_zspage != pages_per_zspage)
> + return false;
> +
> + if (get_maxobj_per_zspage(prev->size, prev->pages_per_zspage)
> + != get_maxobj_per_zspage(size, pages_per_zspage))
> + return false;
> +
> + return true;
> +}
> +
> /**
> * zs_create_pool - Creates an allocation pool to work from.
> * @flags: allocation flags used to allocate pool metadata
> @@ -949,20 +967,46 @@ struct zs_pool *zs_create_pool(gfp_t flags)
> if (!pool)
> return NULL;
>
> - for (i = 0; i < ZS_SIZE_CLASSES; i++) {
> + /*
> + * Iterate reversly, because, size of size_class that we want to use
> + * for merging should be larger or equal to current size.
> + */
> + for (i = ZS_SIZE_CLASSES - 1; i >= 0; i--) {
> int size;
> + int pages_per_zspage;
> struct size_class *class;
> + struct size_class *prev_class;
>
> size = ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA;
> if (size > ZS_MAX_ALLOC_SIZE)
> size = ZS_MAX_ALLOC_SIZE;
> + pages_per_zspage = get_pages_per_zspage(size);
>
> - class = &pool->size_class[i];
> + /*
> + * size_class is used for normal zsmalloc operation such
> + * as alloc/free for that size. Although it is natural that we
> + * have one size_class for each size, there is a chance that we
> + * can get more memory utilization if we use one size_class for
> + * many different sizes whose size_class have same
> + * characteristics. So, we makes size_class point to
> + * previous size_class if possible.
> + */
> + if (i < ZS_SIZE_CLASSES - 1) {
> + prev_class = pool->size_class[i + 1];
> + if (can_merge(prev_class, size, pages_per_zspage)) {
> + pool->size_class[i] = prev_class;
> + prev_class->ref++;
> + continue;
> + }
> + }
> +
> + class = kzalloc(sizeof(struct size_class), GFP_KERNEL);
it's unlikely, but shouldn't this check for failure?
> + class->ref = 1;
> class->size = size;
> class->index = i;
> + class->pages_per_zspage = pages_per_zspage;
> spin_lock_init(&class->lock);
> - class->pages_per_zspage = get_pages_per_zspage(size);
> -
> + pool->size_class[i] = class;
> }
>
> pool->flags = flags;
> @@ -977,7 +1021,11 @@ void zs_destroy_pool(struct zs_pool *pool)
>
> for (i = 0; i < ZS_SIZE_CLASSES; i++) {
> int fg;
> - struct size_class *class = &pool->size_class[i];
> + struct size_class *class = pool->size_class[i];
> +
> + class->ref--;
> + if (class->ref)
> + continue;
>
> for (fg = 0; fg < _ZS_NR_FULLNESS_GROUPS; fg++) {
> if (class->fullness_list[fg]) {
> @@ -985,6 +1033,7 @@ void zs_destroy_pool(struct zs_pool *pool)
> class->size, fg);
> }
> }
> + kfree(class);
> }
> kfree(pool);
> }
> @@ -1003,7 +1052,6 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
> {
> unsigned long obj;
> struct link_free *link;
> - int class_idx;
> struct size_class *class;
>
> struct page *first_page, *m_page;
> @@ -1012,9 +1060,7 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
> if (unlikely(!size || size > ZS_MAX_ALLOC_SIZE))
> return 0;
>
> - class_idx = get_size_class_index(size);
> - class = &pool->size_class[class_idx];
> - BUG_ON(class_idx != class->index);
> + class = pool->size_class[get_size_class_index(size)];
>
> spin_lock(&class->lock);
> first_page = find_get_zspage(class);
> @@ -1067,7 +1113,7 @@ void zs_free(struct zs_pool *pool, unsigned long obj)
> first_page = get_first_page(f_page);
>
> get_zspage_mapping(first_page, &class_idx, &fullness);
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> f_offset = obj_idx_to_offset(f_page, f_objidx, class->size);
>
> spin_lock(&class->lock);
> @@ -1128,7 +1174,7 @@ void *zs_map_object(struct zs_pool *pool, unsigned long handle,
>
> obj_handle_to_location(handle, &page, &obj_idx);
> get_zspage_mapping(get_first_page(page), &class_idx, &fg);
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> off = obj_idx_to_offset(page, obj_idx, class->size);
>
> area = &get_cpu_var(zs_map_area);
> @@ -1162,7 +1208,7 @@ void zs_unmap_object(struct zs_pool *pool, unsigned long handle)
>
> obj_handle_to_location(handle, &page, &obj_idx);
> get_zspage_mapping(get_first_page(page), &class_idx, &fg);
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> off = obj_idx_to_offset(page, obj_idx, class->size);
>
> area = this_cpu_ptr(&zs_map_area);
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] zsmalloc: merge size_class to reduce fragmentation
@ 2014-09-26 20:48 ` Dan Streetman
0 siblings, 0 replies; 6+ messages in thread
From: Dan Streetman @ 2014-09-26 20:48 UTC (permalink / raw)
To: Joonsoo Kim
Cc: Andrew Morton, Minchan Kim, Nitin Gupta, Linux-MM, linux-kernel,
Jerome Marchand, Sergey Senozhatsky, Luigi Semenzato, juno.choi,
seungho1.park
On Fri, Sep 26, 2014 at 2:27 AM, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote:
> zsmalloc has many size_classes to reduce fragmentation and they are
> in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096.
> And, zsmalloc has constraint that each zspage has 4 pages at maximum.
>
> In this situation, we can see interesting aspect.
> Let's think about size_class for 1488, 1472, ..., 1376.
> To prevent external fragmentation, they uses 4 pages per zspage and
> so all they can contain 11 objects at maximum.
>
> 16384 (4096 * 4) = 1488 * 11 + remains
> 16384 (4096 * 4) = 1472 * 11 + remains
> 16384 (4096 * 4) = ...
> 16384 (4096 * 4) = 1376 * 11 + remains
>
> It means that they have same characteristics and classification between
> them isn't needed. If we use one size_class for them, we can reduce
> fragementation and save some memory since both the 1488 and 1472 sized
> classes can only fit 11 objects into 4 pages, and an object that's
> 1472 bytes can fit into an object that's 1488 bytes, merging these
> classes to always use objects that are 1488 bytes will reduce the total
> number of size classes. And reducing the total number of size classes
> reduces overall fragmentation, because a wider range of compressed pages
> can fit into a single size class, leaving less unused objects in each
> size class.
>
> For this purpose, this patch implement size_class merging. If there is
> size_class that have same pages_per_zspage and same number of objects
> per zspage with previous size_class, we don't create new size_class.
> Instead, we use previous, same characteristic size_class. With this way,
> above example sizes (1488, 1472, ..., 1376) use just one size_class
> so we can get much more memory utilization.
>
> Below is result of my simple test.
>
> TEST ENV: EXT4 on zram, mount with discard option
> WORKLOAD: untar kernel source code, remove directory in descending order
> in size. (drivers arch fs sound include net Documentation firmware
> kernel tools)
>
> Each line represents orig_data_size, compr_data_size, mem_used_total,
> fragmentation overhead (mem_used - compr_data_size) and overhead ratio
> (overhead to compr_data_size), respectively, after untar and remove
> operation is executed.
>
> * untar-nomerge.out
>
> orig_size compr_size used_size overhead overhead_ratio
> 525.88MB 199.16MB 210.23MB 11.08MB 5.56%
> 288.32MB 97.43MB 105.63MB 8.20MB 8.41%
> 177.32MB 61.12MB 69.40MB 8.28MB 13.55%
> 146.47MB 47.32MB 56.10MB 8.78MB 18.55%
> 124.16MB 38.85MB 48.41MB 9.55MB 24.58%
> 103.93MB 31.68MB 40.93MB 9.25MB 29.21%
> 84.34MB 22.86MB 32.72MB 9.86MB 43.13%
> 66.87MB 14.83MB 23.83MB 9.00MB 60.70%
> 60.67MB 11.11MB 18.60MB 7.49MB 67.48%
> 55.86MB 8.83MB 16.61MB 7.77MB 88.03%
> 53.32MB 8.01MB 15.32MB 7.31MB 91.24%
>
> * untar-merge.out
>
> orig_size compr_size used_size overhead overhead_ratio
> 526.23MB 199.18MB 209.81MB 10.64MB 5.34%
> 288.68MB 97.45MB 104.08MB 6.63MB 6.80%
> 177.68MB 61.14MB 66.93MB 5.79MB 9.47%
> 146.83MB 47.34MB 52.79MB 5.45MB 11.51%
> 124.52MB 38.87MB 44.30MB 5.43MB 13.96%
> 104.29MB 31.70MB 36.83MB 5.13MB 16.19%
> 84.70MB 22.88MB 27.92MB 5.04MB 22.04%
> 67.11MB 14.83MB 19.26MB 4.43MB 29.86%
> 60.82MB 11.10MB 14.90MB 3.79MB 34.17%
> 55.90MB 8.82MB 12.61MB 3.79MB 42.97%
> 53.32MB 8.01MB 11.73MB 3.73MB 46.53%
>
> As you can see above result, merged one has better utilization (overhead
> ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
>
> Changes from v1:
> - More commit description about what to do in this patch.
> - Remove nr_obj in size_class, because it isn't need after initialization.
> - Rename __size_class to size_class, size_class to merged_size_class.
> - Add code comment for merged_size_class of struct zs_pool.
> - Add code comment how merging works in zs_create_pool().
>
> Changes from v2:
> - Add more commit description (Dan)
> - dynamically allocate size_class structure (Dan)
> - rename objs_per_zspage to get_maxobj_per_zspage (Minchan)
>
> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
> ---
> mm/zsmalloc.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 60 insertions(+), 14 deletions(-)
>
> diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
> index c4a9157..836e8f8 100644
> --- a/mm/zsmalloc.c
> +++ b/mm/zsmalloc.c
> @@ -187,6 +187,7 @@ enum fullness_group {
> static const int fullness_threshold_frac = 4;
>
> struct size_class {
> + int ref;
> /*
> * Size of objects stored in this class. Must be multiple
> * of ZS_ALIGN.
> @@ -214,7 +215,7 @@ struct link_free {
> };
>
> struct zs_pool {
> - struct size_class size_class[ZS_SIZE_CLASSES];
> + struct size_class *size_class[ZS_SIZE_CLASSES];
>
> gfp_t flags; /* allocation flags used when growing pool */
> atomic_long_t pages_allocated;
> @@ -468,7 +469,7 @@ static enum fullness_group fix_fullness_group(struct zs_pool *pool,
> if (newfg == currfg)
> goto out;
>
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> remove_zspage(page, class, currfg);
> insert_zspage(page, class, newfg);
> set_zspage_mapping(page, class_idx, newfg);
> @@ -929,6 +930,23 @@ fail:
> return notifier_to_errno(ret);
> }
>
> +static unsigned int get_maxobj_per_zspage(int size, int pages_per_zspage)
> +{
> + return pages_per_zspage * PAGE_SIZE / size;
> +}
> +
> +static bool can_merge(struct size_class *prev, int size, int pages_per_zspage)
> +{
> + if (prev->pages_per_zspage != pages_per_zspage)
> + return false;
> +
> + if (get_maxobj_per_zspage(prev->size, prev->pages_per_zspage)
> + != get_maxobj_per_zspage(size, pages_per_zspage))
> + return false;
> +
> + return true;
> +}
> +
> /**
> * zs_create_pool - Creates an allocation pool to work from.
> * @flags: allocation flags used to allocate pool metadata
> @@ -949,20 +967,46 @@ struct zs_pool *zs_create_pool(gfp_t flags)
> if (!pool)
> return NULL;
>
> - for (i = 0; i < ZS_SIZE_CLASSES; i++) {
> + /*
> + * Iterate reversly, because, size of size_class that we want to use
> + * for merging should be larger or equal to current size.
> + */
> + for (i = ZS_SIZE_CLASSES - 1; i >= 0; i--) {
> int size;
> + int pages_per_zspage;
> struct size_class *class;
> + struct size_class *prev_class;
>
> size = ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA;
> if (size > ZS_MAX_ALLOC_SIZE)
> size = ZS_MAX_ALLOC_SIZE;
> + pages_per_zspage = get_pages_per_zspage(size);
>
> - class = &pool->size_class[i];
> + /*
> + * size_class is used for normal zsmalloc operation such
> + * as alloc/free for that size. Although it is natural that we
> + * have one size_class for each size, there is a chance that we
> + * can get more memory utilization if we use one size_class for
> + * many different sizes whose size_class have same
> + * characteristics. So, we makes size_class point to
> + * previous size_class if possible.
> + */
> + if (i < ZS_SIZE_CLASSES - 1) {
> + prev_class = pool->size_class[i + 1];
> + if (can_merge(prev_class, size, pages_per_zspage)) {
> + pool->size_class[i] = prev_class;
> + prev_class->ref++;
> + continue;
> + }
> + }
> +
> + class = kzalloc(sizeof(struct size_class), GFP_KERNEL);
it's unlikely, but shouldn't this check for failure?
> + class->ref = 1;
> class->size = size;
> class->index = i;
> + class->pages_per_zspage = pages_per_zspage;
> spin_lock_init(&class->lock);
> - class->pages_per_zspage = get_pages_per_zspage(size);
> -
> + pool->size_class[i] = class;
> }
>
> pool->flags = flags;
> @@ -977,7 +1021,11 @@ void zs_destroy_pool(struct zs_pool *pool)
>
> for (i = 0; i < ZS_SIZE_CLASSES; i++) {
> int fg;
> - struct size_class *class = &pool->size_class[i];
> + struct size_class *class = pool->size_class[i];
> +
> + class->ref--;
> + if (class->ref)
> + continue;
>
> for (fg = 0; fg < _ZS_NR_FULLNESS_GROUPS; fg++) {
> if (class->fullness_list[fg]) {
> @@ -985,6 +1033,7 @@ void zs_destroy_pool(struct zs_pool *pool)
> class->size, fg);
> }
> }
> + kfree(class);
> }
> kfree(pool);
> }
> @@ -1003,7 +1052,6 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
> {
> unsigned long obj;
> struct link_free *link;
> - int class_idx;
> struct size_class *class;
>
> struct page *first_page, *m_page;
> @@ -1012,9 +1060,7 @@ unsigned long zs_malloc(struct zs_pool *pool, size_t size)
> if (unlikely(!size || size > ZS_MAX_ALLOC_SIZE))
> return 0;
>
> - class_idx = get_size_class_index(size);
> - class = &pool->size_class[class_idx];
> - BUG_ON(class_idx != class->index);
> + class = pool->size_class[get_size_class_index(size)];
>
> spin_lock(&class->lock);
> first_page = find_get_zspage(class);
> @@ -1067,7 +1113,7 @@ void zs_free(struct zs_pool *pool, unsigned long obj)
> first_page = get_first_page(f_page);
>
> get_zspage_mapping(first_page, &class_idx, &fullness);
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> f_offset = obj_idx_to_offset(f_page, f_objidx, class->size);
>
> spin_lock(&class->lock);
> @@ -1128,7 +1174,7 @@ void *zs_map_object(struct zs_pool *pool, unsigned long handle,
>
> obj_handle_to_location(handle, &page, &obj_idx);
> get_zspage_mapping(get_first_page(page), &class_idx, &fg);
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> off = obj_idx_to_offset(page, obj_idx, class->size);
>
> area = &get_cpu_var(zs_map_area);
> @@ -1162,7 +1208,7 @@ void zs_unmap_object(struct zs_pool *pool, unsigned long handle)
>
> obj_handle_to_location(handle, &page, &obj_idx);
> get_zspage_mapping(get_first_page(page), &class_idx, &fg);
> - class = &pool->size_class[class_idx];
> + class = pool->size_class[class_idx];
> off = obj_idx_to_offset(page, obj_idx, class->size);
>
> area = this_cpu_ptr(&zs_map_area);
> --
> 1.7.9.5
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] zsmalloc: merge size_class to reduce fragmentation
2014-09-26 20:48 ` Dan Streetman
@ 2014-09-29 7:45 ` Joonsoo Kim
-1 siblings, 0 replies; 6+ messages in thread
From: Joonsoo Kim @ 2014-09-29 7:45 UTC (permalink / raw)
To: Dan Streetman
Cc: Andrew Morton, Minchan Kim, Nitin Gupta, Linux-MM, linux-kernel,
Jerome Marchand, Sergey Senozhatsky, Luigi Semenzato, juno.choi,
seungho1.park
On Fri, Sep 26, 2014 at 04:48:45PM -0400, Dan Streetman wrote:
> On Fri, Sep 26, 2014 at 2:27 AM, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote:
> > zsmalloc has many size_classes to reduce fragmentation and they are
> > in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096.
> > And, zsmalloc has constraint that each zspage has 4 pages at maximum.
> >
> > In this situation, we can see interesting aspect.
> > Let's think about size_class for 1488, 1472, ..., 1376.
> > To prevent external fragmentation, they uses 4 pages per zspage and
> > so all they can contain 11 objects at maximum.
> >
> > 16384 (4096 * 4) = 1488 * 11 + remains
> > 16384 (4096 * 4) = 1472 * 11 + remains
> > 16384 (4096 * 4) = ...
> > 16384 (4096 * 4) = 1376 * 11 + remains
> >
> > It means that they have same characteristics and classification between
> > them isn't needed. If we use one size_class for them, we can reduce
> > fragementation and save some memory since both the 1488 and 1472 sized
> > classes can only fit 11 objects into 4 pages, and an object that's
> > 1472 bytes can fit into an object that's 1488 bytes, merging these
> > classes to always use objects that are 1488 bytes will reduce the total
> > number of size classes. And reducing the total number of size classes
> > reduces overall fragmentation, because a wider range of compressed pages
> > can fit into a single size class, leaving less unused objects in each
> > size class.
> >
> > For this purpose, this patch implement size_class merging. If there is
> > size_class that have same pages_per_zspage and same number of objects
> > per zspage with previous size_class, we don't create new size_class.
> > Instead, we use previous, same characteristic size_class. With this way,
> > above example sizes (1488, 1472, ..., 1376) use just one size_class
> > so we can get much more memory utilization.
> >
> > Below is result of my simple test.
> >
> > TEST ENV: EXT4 on zram, mount with discard option
> > WORKLOAD: untar kernel source code, remove directory in descending order
> > in size. (drivers arch fs sound include net Documentation firmware
> > kernel tools)
> >
> > Each line represents orig_data_size, compr_data_size, mem_used_total,
> > fragmentation overhead (mem_used - compr_data_size) and overhead ratio
> > (overhead to compr_data_size), respectively, after untar and remove
> > operation is executed.
> >
> > * untar-nomerge.out
> >
> > orig_size compr_size used_size overhead overhead_ratio
> > 525.88MB 199.16MB 210.23MB 11.08MB 5.56%
> > 288.32MB 97.43MB 105.63MB 8.20MB 8.41%
> > 177.32MB 61.12MB 69.40MB 8.28MB 13.55%
> > 146.47MB 47.32MB 56.10MB 8.78MB 18.55%
> > 124.16MB 38.85MB 48.41MB 9.55MB 24.58%
> > 103.93MB 31.68MB 40.93MB 9.25MB 29.21%
> > 84.34MB 22.86MB 32.72MB 9.86MB 43.13%
> > 66.87MB 14.83MB 23.83MB 9.00MB 60.70%
> > 60.67MB 11.11MB 18.60MB 7.49MB 67.48%
> > 55.86MB 8.83MB 16.61MB 7.77MB 88.03%
> > 53.32MB 8.01MB 15.32MB 7.31MB 91.24%
> >
> > * untar-merge.out
> >
> > orig_size compr_size used_size overhead overhead_ratio
> > 526.23MB 199.18MB 209.81MB 10.64MB 5.34%
> > 288.68MB 97.45MB 104.08MB 6.63MB 6.80%
> > 177.68MB 61.14MB 66.93MB 5.79MB 9.47%
> > 146.83MB 47.34MB 52.79MB 5.45MB 11.51%
> > 124.52MB 38.87MB 44.30MB 5.43MB 13.96%
> > 104.29MB 31.70MB 36.83MB 5.13MB 16.19%
> > 84.70MB 22.88MB 27.92MB 5.04MB 22.04%
> > 67.11MB 14.83MB 19.26MB 4.43MB 29.86%
> > 60.82MB 11.10MB 14.90MB 3.79MB 34.17%
> > 55.90MB 8.82MB 12.61MB 3.79MB 42.97%
> > 53.32MB 8.01MB 11.73MB 3.73MB 46.53%
> >
> > As you can see above result, merged one has better utilization (overhead
> > ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
> >
> > Changes from v1:
> > - More commit description about what to do in this patch.
> > - Remove nr_obj in size_class, because it isn't need after initialization.
> > - Rename __size_class to size_class, size_class to merged_size_class.
> > - Add code comment for merged_size_class of struct zs_pool.
> > - Add code comment how merging works in zs_create_pool().
> >
> > Changes from v2:
> > - Add more commit description (Dan)
> > - dynamically allocate size_class structure (Dan)
> > - rename objs_per_zspage to get_maxobj_per_zspage (Minchan)
> >
> > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
> > ---
> > mm/zsmalloc.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++-----------
> > 1 file changed, 60 insertions(+), 14 deletions(-)
> >
> > diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
> > index c4a9157..836e8f8 100644
> > --- a/mm/zsmalloc.c
> > +++ b/mm/zsmalloc.c
> > @@ -187,6 +187,7 @@ enum fullness_group {
> > static const int fullness_threshold_frac = 4;
> >
> > struct size_class {
> > + int ref;
> > /*
> > * Size of objects stored in this class. Must be multiple
> > * of ZS_ALIGN.
> > @@ -214,7 +215,7 @@ struct link_free {
> > };
> >
> > struct zs_pool {
> > - struct size_class size_class[ZS_SIZE_CLASSES];
> > + struct size_class *size_class[ZS_SIZE_CLASSES];
> >
> > gfp_t flags; /* allocation flags used when growing pool */
> > atomic_long_t pages_allocated;
> > @@ -468,7 +469,7 @@ static enum fullness_group fix_fullness_group(struct zs_pool *pool,
> > if (newfg == currfg)
> > goto out;
> >
> > - class = &pool->size_class[class_idx];
> > + class = pool->size_class[class_idx];
> > remove_zspage(page, class, currfg);
> > insert_zspage(page, class, newfg);
> > set_zspage_mapping(page, class_idx, newfg);
> > @@ -929,6 +930,23 @@ fail:
> > return notifier_to_errno(ret);
> > }
> >
> > +static unsigned int get_maxobj_per_zspage(int size, int pages_per_zspage)
> > +{
> > + return pages_per_zspage * PAGE_SIZE / size;
> > +}
> > +
> > +static bool can_merge(struct size_class *prev, int size, int pages_per_zspage)
> > +{
> > + if (prev->pages_per_zspage != pages_per_zspage)
> > + return false;
> > +
> > + if (get_maxobj_per_zspage(prev->size, prev->pages_per_zspage)
> > + != get_maxobj_per_zspage(size, pages_per_zspage))
> > + return false;
> > +
> > + return true;
> > +}
> > +
> > /**
> > * zs_create_pool - Creates an allocation pool to work from.
> > * @flags: allocation flags used to allocate pool metadata
> > @@ -949,20 +967,46 @@ struct zs_pool *zs_create_pool(gfp_t flags)
> > if (!pool)
> > return NULL;
> >
> > - for (i = 0; i < ZS_SIZE_CLASSES; i++) {
> > + /*
> > + * Iterate reversly, because, size of size_class that we want to use
> > + * for merging should be larger or equal to current size.
> > + */
> > + for (i = ZS_SIZE_CLASSES - 1; i >= 0; i--) {
> > int size;
> > + int pages_per_zspage;
> > struct size_class *class;
> > + struct size_class *prev_class;
> >
> > size = ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA;
> > if (size > ZS_MAX_ALLOC_SIZE)
> > size = ZS_MAX_ALLOC_SIZE;
> > + pages_per_zspage = get_pages_per_zspage(size);
> >
> > - class = &pool->size_class[i];
> > + /*
> > + * size_class is used for normal zsmalloc operation such
> > + * as alloc/free for that size. Although it is natural that we
> > + * have one size_class for each size, there is a chance that we
> > + * can get more memory utilization if we use one size_class for
> > + * many different sizes whose size_class have same
> > + * characteristics. So, we makes size_class point to
> > + * previous size_class if possible.
> > + */
> > + if (i < ZS_SIZE_CLASSES - 1) {
> > + prev_class = pool->size_class[i + 1];
> > + if (can_merge(prev_class, size, pages_per_zspage)) {
> > + pool->size_class[i] = prev_class;
> > + prev_class->ref++;
> > + continue;
> > + }
> > + }
> > +
> > + class = kzalloc(sizeof(struct size_class), GFP_KERNEL);
>
> it's unlikely, but shouldn't this check for failure?
>
Okay. I will resend with this fix.
Thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] zsmalloc: merge size_class to reduce fragmentation
@ 2014-09-29 7:45 ` Joonsoo Kim
0 siblings, 0 replies; 6+ messages in thread
From: Joonsoo Kim @ 2014-09-29 7:45 UTC (permalink / raw)
To: Dan Streetman
Cc: Andrew Morton, Minchan Kim, Nitin Gupta, Linux-MM, linux-kernel,
Jerome Marchand, Sergey Senozhatsky, Luigi Semenzato, juno.choi,
seungho1.park
On Fri, Sep 26, 2014 at 04:48:45PM -0400, Dan Streetman wrote:
> On Fri, Sep 26, 2014 at 2:27 AM, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote:
> > zsmalloc has many size_classes to reduce fragmentation and they are
> > in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096.
> > And, zsmalloc has constraint that each zspage has 4 pages at maximum.
> >
> > In this situation, we can see interesting aspect.
> > Let's think about size_class for 1488, 1472, ..., 1376.
> > To prevent external fragmentation, they uses 4 pages per zspage and
> > so all they can contain 11 objects at maximum.
> >
> > 16384 (4096 * 4) = 1488 * 11 + remains
> > 16384 (4096 * 4) = 1472 * 11 + remains
> > 16384 (4096 * 4) = ...
> > 16384 (4096 * 4) = 1376 * 11 + remains
> >
> > It means that they have same characteristics and classification between
> > them isn't needed. If we use one size_class for them, we can reduce
> > fragementation and save some memory since both the 1488 and 1472 sized
> > classes can only fit 11 objects into 4 pages, and an object that's
> > 1472 bytes can fit into an object that's 1488 bytes, merging these
> > classes to always use objects that are 1488 bytes will reduce the total
> > number of size classes. And reducing the total number of size classes
> > reduces overall fragmentation, because a wider range of compressed pages
> > can fit into a single size class, leaving less unused objects in each
> > size class.
> >
> > For this purpose, this patch implement size_class merging. If there is
> > size_class that have same pages_per_zspage and same number of objects
> > per zspage with previous size_class, we don't create new size_class.
> > Instead, we use previous, same characteristic size_class. With this way,
> > above example sizes (1488, 1472, ..., 1376) use just one size_class
> > so we can get much more memory utilization.
> >
> > Below is result of my simple test.
> >
> > TEST ENV: EXT4 on zram, mount with discard option
> > WORKLOAD: untar kernel source code, remove directory in descending order
> > in size. (drivers arch fs sound include net Documentation firmware
> > kernel tools)
> >
> > Each line represents orig_data_size, compr_data_size, mem_used_total,
> > fragmentation overhead (mem_used - compr_data_size) and overhead ratio
> > (overhead to compr_data_size), respectively, after untar and remove
> > operation is executed.
> >
> > * untar-nomerge.out
> >
> > orig_size compr_size used_size overhead overhead_ratio
> > 525.88MB 199.16MB 210.23MB 11.08MB 5.56%
> > 288.32MB 97.43MB 105.63MB 8.20MB 8.41%
> > 177.32MB 61.12MB 69.40MB 8.28MB 13.55%
> > 146.47MB 47.32MB 56.10MB 8.78MB 18.55%
> > 124.16MB 38.85MB 48.41MB 9.55MB 24.58%
> > 103.93MB 31.68MB 40.93MB 9.25MB 29.21%
> > 84.34MB 22.86MB 32.72MB 9.86MB 43.13%
> > 66.87MB 14.83MB 23.83MB 9.00MB 60.70%
> > 60.67MB 11.11MB 18.60MB 7.49MB 67.48%
> > 55.86MB 8.83MB 16.61MB 7.77MB 88.03%
> > 53.32MB 8.01MB 15.32MB 7.31MB 91.24%
> >
> > * untar-merge.out
> >
> > orig_size compr_size used_size overhead overhead_ratio
> > 526.23MB 199.18MB 209.81MB 10.64MB 5.34%
> > 288.68MB 97.45MB 104.08MB 6.63MB 6.80%
> > 177.68MB 61.14MB 66.93MB 5.79MB 9.47%
> > 146.83MB 47.34MB 52.79MB 5.45MB 11.51%
> > 124.52MB 38.87MB 44.30MB 5.43MB 13.96%
> > 104.29MB 31.70MB 36.83MB 5.13MB 16.19%
> > 84.70MB 22.88MB 27.92MB 5.04MB 22.04%
> > 67.11MB 14.83MB 19.26MB 4.43MB 29.86%
> > 60.82MB 11.10MB 14.90MB 3.79MB 34.17%
> > 55.90MB 8.82MB 12.61MB 3.79MB 42.97%
> > 53.32MB 8.01MB 11.73MB 3.73MB 46.53%
> >
> > As you can see above result, merged one has better utilization (overhead
> > ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
> >
> > Changes from v1:
> > - More commit description about what to do in this patch.
> > - Remove nr_obj in size_class, because it isn't need after initialization.
> > - Rename __size_class to size_class, size_class to merged_size_class.
> > - Add code comment for merged_size_class of struct zs_pool.
> > - Add code comment how merging works in zs_create_pool().
> >
> > Changes from v2:
> > - Add more commit description (Dan)
> > - dynamically allocate size_class structure (Dan)
> > - rename objs_per_zspage to get_maxobj_per_zspage (Minchan)
> >
> > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
> > ---
> > mm/zsmalloc.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++-----------
> > 1 file changed, 60 insertions(+), 14 deletions(-)
> >
> > diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
> > index c4a9157..836e8f8 100644
> > --- a/mm/zsmalloc.c
> > +++ b/mm/zsmalloc.c
> > @@ -187,6 +187,7 @@ enum fullness_group {
> > static const int fullness_threshold_frac = 4;
> >
> > struct size_class {
> > + int ref;
> > /*
> > * Size of objects stored in this class. Must be multiple
> > * of ZS_ALIGN.
> > @@ -214,7 +215,7 @@ struct link_free {
> > };
> >
> > struct zs_pool {
> > - struct size_class size_class[ZS_SIZE_CLASSES];
> > + struct size_class *size_class[ZS_SIZE_CLASSES];
> >
> > gfp_t flags; /* allocation flags used when growing pool */
> > atomic_long_t pages_allocated;
> > @@ -468,7 +469,7 @@ static enum fullness_group fix_fullness_group(struct zs_pool *pool,
> > if (newfg == currfg)
> > goto out;
> >
> > - class = &pool->size_class[class_idx];
> > + class = pool->size_class[class_idx];
> > remove_zspage(page, class, currfg);
> > insert_zspage(page, class, newfg);
> > set_zspage_mapping(page, class_idx, newfg);
> > @@ -929,6 +930,23 @@ fail:
> > return notifier_to_errno(ret);
> > }
> >
> > +static unsigned int get_maxobj_per_zspage(int size, int pages_per_zspage)
> > +{
> > + return pages_per_zspage * PAGE_SIZE / size;
> > +}
> > +
> > +static bool can_merge(struct size_class *prev, int size, int pages_per_zspage)
> > +{
> > + if (prev->pages_per_zspage != pages_per_zspage)
> > + return false;
> > +
> > + if (get_maxobj_per_zspage(prev->size, prev->pages_per_zspage)
> > + != get_maxobj_per_zspage(size, pages_per_zspage))
> > + return false;
> > +
> > + return true;
> > +}
> > +
> > /**
> > * zs_create_pool - Creates an allocation pool to work from.
> > * @flags: allocation flags used to allocate pool metadata
> > @@ -949,20 +967,46 @@ struct zs_pool *zs_create_pool(gfp_t flags)
> > if (!pool)
> > return NULL;
> >
> > - for (i = 0; i < ZS_SIZE_CLASSES; i++) {
> > + /*
> > + * Iterate reversly, because, size of size_class that we want to use
> > + * for merging should be larger or equal to current size.
> > + */
> > + for (i = ZS_SIZE_CLASSES - 1; i >= 0; i--) {
> > int size;
> > + int pages_per_zspage;
> > struct size_class *class;
> > + struct size_class *prev_class;
> >
> > size = ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA;
> > if (size > ZS_MAX_ALLOC_SIZE)
> > size = ZS_MAX_ALLOC_SIZE;
> > + pages_per_zspage = get_pages_per_zspage(size);
> >
> > - class = &pool->size_class[i];
> > + /*
> > + * size_class is used for normal zsmalloc operation such
> > + * as alloc/free for that size. Although it is natural that we
> > + * have one size_class for each size, there is a chance that we
> > + * can get more memory utilization if we use one size_class for
> > + * many different sizes whose size_class have same
> > + * characteristics. So, we makes size_class point to
> > + * previous size_class if possible.
> > + */
> > + if (i < ZS_SIZE_CLASSES - 1) {
> > + prev_class = pool->size_class[i + 1];
> > + if (can_merge(prev_class, size, pages_per_zspage)) {
> > + pool->size_class[i] = prev_class;
> > + prev_class->ref++;
> > + continue;
> > + }
> > + }
> > +
> > + class = kzalloc(sizeof(struct size_class), GFP_KERNEL);
>
> it's unlikely, but shouldn't this check for failure?
>
Okay. I will resend with this fix.
Thanks.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-09-29 7:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-26 6:27 [PATCH v3] zsmalloc: merge size_class to reduce fragmentation Joonsoo Kim
2014-09-26 6:27 ` Joonsoo Kim
2014-09-26 20:48 ` Dan Streetman
2014-09-26 20:48 ` Dan Streetman
2014-09-29 7:45 ` Joonsoo Kim
2014-09-29 7:45 ` Joonsoo Kim
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.