From: Sebastian Andrzej Siewior <bigeasy@linutronix.de> To: Peter Hurley <peter@hurleysoftware.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>, linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, tony@atomide.com, balbi@ti.com, gregkh@linuxfoundation.org, Alan Cox <alan@linux.intel.com> Subject: Re: [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Date: Mon, 29 Sep 2014 18:15:05 +0200 [thread overview] Message-ID: <20140929161505.GF13142@linutronix.de> (raw) In-Reply-To: <54197C99.8030601@hurleysoftware.com> * Peter Hurley | 2014-09-17 08:20:41 [-0400]: >> So I connected my am335x-evm >> with beagle board xm because both of them have an old fashion UART >> connector (instead those uart-to-usb). Both configured with HW-Flow and >> I haven't seen the function invoked but I saw "port->icount.overrun" >> being incremented. This shouldn't happen. So I am a little puzzled here… > >Yeah, that's weird. Do you have a break-out box to confirm that RTS/CTS are >being driven? => - beagle board According to schematics the board has only RX and TX connected. No RTS/CTS - am335x-evm The schematics say "DNI" next to a resistor on RTS/CTS. DNI stands most likely for "Do Not Install". With a scope it looks like the the wire behind the MAX is open. - beagle bone black Only RX and TX are wired towards the USB2serial device. In short: each device I have has RTS/CTS not working/connected and I can't test HW handshake with HW available. >Regards, >Peter Hurley Sebastian
WARNING: multiple messages have this Message-ID (diff)
From: bigeasy@linutronix.de (Sebastian Andrzej Siewior) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Date: Mon, 29 Sep 2014 18:15:05 +0200 [thread overview] Message-ID: <20140929161505.GF13142@linutronix.de> (raw) In-Reply-To: <54197C99.8030601@hurleysoftware.com> * Peter Hurley | 2014-09-17 08:20:41 [-0400]: >> So I connected my am335x-evm >> with beagle board xm because both of them have an old fashion UART >> connector (instead those uart-to-usb). Both configured with HW-Flow and >> I haven't seen the function invoked but I saw "port->icount.overrun" >> being incremented. This shouldn't happen. So I am a little puzzled here? > >Yeah, that's weird. Do you have a break-out box to confirm that RTS/CTS are >being driven? => - beagle board According to schematics the board has only RX and TX connected. No RTS/CTS - am335x-evm The schematics say "DNI" next to a resistor on RTS/CTS. DNI stands most likely for "Do Not Install". With a scope it looks like the the wire behind the MAX is open. - beagle bone black Only RX and TX are wired towards the USB2serial device. In short: each device I have has RTS/CTS not working/connected and I can't test HW handshake with HW available. >Regards, >Peter Hurley Sebastian
next prev parent reply other threads:[~2014-09-29 16:15 UTC|newest] Thread overview: 236+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-10 19:29 [PATCH 00/16 v9] omap 8250 based uart + DMA Sebastian Andrzej Siewior 2014-09-10 19:29 ` Sebastian Andrzej Siewior 2014-09-10 19:29 ` Sebastian Andrzej Siewior 2014-09-10 19:29 ` [PATCH 01/16] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks Sebastian Andrzej Siewior 2014-09-10 19:29 ` Sebastian Andrzej Siewior 2014-09-10 19:29 ` [PATCH 02/16] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior 2014-09-10 19:29 ` Sebastian Andrzej Siewior 2014-09-10 19:29 ` Sebastian Andrzej Siewior 2014-09-29 9:46 ` Frans Klaver 2014-09-29 9:46 ` Frans Klaver 2014-09-29 9:46 ` Frans Klaver 2014-09-29 13:39 ` Sebastian Andrzej Siewior 2014-09-29 13:39 ` Sebastian Andrzej Siewior 2014-09-10 19:29 ` [PATCH 03/16] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior 2014-09-10 19:29 ` Sebastian Andrzej Siewior 2015-02-09 13:34 ` Nicolas Schichan 2015-02-09 13:34 ` Nicolas Schichan 2015-02-09 23:34 ` Peter Hurley 2015-02-09 23:34 ` Peter Hurley 2015-02-10 9:32 ` Sebastian Andrzej Siewior 2015-02-10 9:32 ` Sebastian Andrzej Siewior 2015-02-10 12:04 ` Nicolas Schichan 2015-02-10 12:04 ` Nicolas Schichan 2015-02-10 17:46 ` Peter Hurley 2015-02-10 17:46 ` Peter Hurley 2015-02-11 20:01 ` Peter Hurley 2015-02-11 20:01 ` Peter Hurley 2015-02-11 20:03 ` Tony Lindgren 2015-02-11 20:03 ` Tony Lindgren 2015-02-11 20:03 ` Tony Lindgren 2015-02-11 20:42 ` Peter Hurley 2015-02-11 20:42 ` Peter Hurley 2015-02-12 8:45 ` Sebastian Andrzej Siewior 2015-02-12 8:45 ` Sebastian Andrzej Siewior 2015-02-12 9:40 ` Russell King - ARM Linux 2015-02-12 9:40 ` Russell King - ARM Linux 2015-02-12 16:32 ` Peter Hurley 2015-02-12 16:32 ` Peter Hurley 2015-02-12 19:23 ` Sebastian Andrzej Siewior 2015-02-12 19:23 ` Sebastian Andrzej Siewior 2015-02-12 19:55 ` Peter Hurley 2015-02-12 19:55 ` Peter Hurley 2015-02-12 20:34 ` Sebastian Andrzej Siewior 2015-02-12 20:34 ` Sebastian Andrzej Siewior 2015-02-13 18:51 ` Sebastian Andrzej Siewior 2015-02-13 18:51 ` Sebastian Andrzej Siewior 2015-02-13 23:15 ` Russell King - ARM Linux 2015-02-13 23:15 ` Russell King - ARM Linux 2015-02-15 17:32 ` [PATCH] serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Sebastian Andrzej Siewior 2015-02-15 17:32 ` Sebastian Andrzej Siewior 2015-05-12 20:25 ` Tony Lindgren 2015-05-12 20:25 ` Tony Lindgren 2014-09-10 19:29 ` [PATCH 04/16] tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() Sebastian Andrzej Siewior 2014-09-10 19:29 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 05/16] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-11 11:19 ` Heikki Krogerus 2014-09-11 11:19 ` Heikki Krogerus 2014-09-10 19:30 ` [PATCH 06/16] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-11 11:57 ` Peter Hurley 2014-09-11 11:57 ` Peter Hurley 2014-09-11 11:57 ` Peter Hurley 2014-09-16 17:01 ` Sebastian Andrzej Siewior 2014-09-16 17:01 ` Sebastian Andrzej Siewior 2014-09-16 17:01 ` Sebastian Andrzej Siewior 2014-09-29 9:38 ` Frans Klaver 2014-09-29 9:38 ` Frans Klaver 2014-09-29 9:38 ` Frans Klaver 2014-09-29 13:27 ` Sebastian Andrzej Siewior 2014-09-29 13:27 ` Sebastian Andrzej Siewior 2014-09-29 13:34 ` Frans Klaver 2014-09-29 13:34 ` Frans Klaver 2014-09-10 19:30 ` [PATCH 07/16] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 08/16] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-11 11:17 ` Heikki Krogerus 2014-09-11 11:17 ` Heikki Krogerus 2014-09-11 11:17 ` Heikki Krogerus 2014-09-11 11:42 ` Sebastian Andrzej Siewior 2014-09-11 11:42 ` Sebastian Andrzej Siewior 2014-09-11 11:42 ` Sebastian Andrzej Siewior 2014-09-11 12:32 ` Peter Hurley 2014-09-11 12:32 ` Peter Hurley 2014-09-11 12:50 ` Sebastian Andrzej Siewior 2014-09-11 12:50 ` Sebastian Andrzej Siewior 2014-09-11 14:35 ` Peter Hurley 2014-09-11 14:35 ` Peter Hurley 2014-09-11 14:35 ` Peter Hurley 2014-09-15 17:01 ` Sebastian Andrzej Siewior 2014-09-15 17:01 ` Sebastian Andrzej Siewior 2014-09-16 16:55 ` Sebastian Andrzej Siewior 2014-09-16 16:55 ` Sebastian Andrzej Siewior 2014-09-16 16:55 ` Sebastian Andrzej Siewior 2014-09-17 12:20 ` Peter Hurley 2014-09-17 12:20 ` Peter Hurley 2014-09-17 16:25 ` Sebastian Andrzej Siewior 2014-09-17 16:25 ` Sebastian Andrzej Siewior 2014-09-17 16:25 ` Sebastian Andrzej Siewior 2014-09-29 16:15 ` Sebastian Andrzej Siewior [this message] 2014-09-29 16:15 ` Sebastian Andrzej Siewior 2014-09-11 15:11 ` Frans Klaver 2014-09-11 15:11 ` Frans Klaver 2014-09-11 15:11 ` Frans Klaver 2014-09-11 16:04 ` Sebastian Andrzej Siewior 2014-09-11 16:04 ` Sebastian Andrzej Siewior 2014-09-11 17:04 ` Frans Klaver 2014-09-11 17:04 ` Frans Klaver 2014-09-12 7:23 ` Sebastian Andrzej Siewior 2014-09-12 7:23 ` Sebastian Andrzej Siewior 2014-09-12 9:40 ` Frans Klaver 2014-09-12 9:40 ` Frans Klaver 2014-09-12 9:51 ` Sebastian Andrzej Siewior 2014-09-12 9:51 ` Sebastian Andrzej Siewior 2014-09-12 10:28 ` Frans Klaver 2014-09-12 10:28 ` Frans Klaver 2014-09-12 10:28 ` Frans Klaver 2014-09-15 16:42 ` Sebastian Andrzej Siewior 2014-09-15 16:42 ` Sebastian Andrzej Siewior 2014-09-16 9:05 ` Frans Klaver 2014-09-16 9:05 ` Frans Klaver 2014-09-16 9:05 ` Frans Klaver 2014-09-16 12:42 ` Frans Klaver 2014-09-16 12:42 ` Frans Klaver 2014-09-16 12:42 ` Frans Klaver 2014-09-16 14:23 ` Frans Klaver 2014-09-16 14:23 ` Frans Klaver 2014-09-16 14:23 ` Frans Klaver 2014-09-17 10:28 ` Frans Klaver 2014-09-17 10:28 ` Frans Klaver 2014-09-17 10:28 ` Frans Klaver 2014-09-21 20:41 ` Sebastian Andrzej Siewior 2014-09-21 20:41 ` Sebastian Andrzej Siewior 2014-09-21 20:41 ` Sebastian Andrzej Siewior 2014-09-22 9:28 ` Frans Klaver 2014-09-22 9:28 ` Frans Klaver 2014-09-22 9:28 ` Frans Klaver 2014-09-24 7:56 ` Sebastian Andrzej Siewior 2014-09-24 7:56 ` Sebastian Andrzej Siewior 2014-09-25 15:14 ` Sebastian Andrzej Siewior 2014-09-25 15:14 ` Sebastian Andrzej Siewior 2014-09-25 15:18 ` Frans Klaver 2014-09-25 15:18 ` Frans Klaver 2014-09-29 8:50 ` Frans Klaver 2014-09-29 8:50 ` Frans Klaver 2014-09-29 8:50 ` Frans Klaver 2014-09-29 9:54 ` Sebastian Andrzej Siewior 2014-09-29 9:54 ` Sebastian Andrzej Siewior 2014-09-29 10:30 ` Frans Klaver 2014-09-29 10:30 ` Frans Klaver 2014-09-29 10:30 ` Frans Klaver 2014-09-30 8:44 ` Frans Klaver 2014-09-30 8:44 ` Frans Klaver 2014-09-30 8:44 ` Frans Klaver 2014-10-02 10:27 ` Sebastian Andrzej Siewior 2014-10-02 10:27 ` Sebastian Andrzej Siewior 2014-10-02 10:27 ` Sebastian Andrzej Siewior 2014-10-13 14:55 ` Frans Klaver 2014-10-13 14:55 ` Frans Klaver 2014-10-13 14:55 ` Frans Klaver 2014-09-23 17:03 ` Peter Hurley 2014-09-23 17:03 ` Peter Hurley 2014-09-24 7:53 ` Sebastian Andrzej Siewior 2014-09-24 7:53 ` Sebastian Andrzej Siewior 2014-09-25 10:42 ` Sebastian Andrzej Siewior 2014-09-25 10:42 ` Sebastian Andrzej Siewior 2014-09-25 11:31 ` Peter Hurley 2014-09-25 11:31 ` Peter Hurley 2014-09-25 13:11 ` Sebastian Andrzej Siewior 2014-09-25 13:11 ` Sebastian Andrzej Siewior 2014-09-25 13:11 ` Sebastian Andrzej Siewior 2014-09-17 16:34 ` Sebastian Andrzej Siewior 2014-09-17 16:34 ` Sebastian Andrzej Siewior 2014-09-17 16:34 ` Sebastian Andrzej Siewior 2014-09-19 10:22 ` Heikki Krogerus 2014-09-19 10:22 ` Heikki Krogerus 2014-09-19 10:22 ` Heikki Krogerus 2014-09-19 10:58 ` Sebastian Andrzej Siewior 2014-09-19 10:58 ` Sebastian Andrzej Siewior 2014-09-19 11:25 ` Peter Hurley 2014-09-19 11:25 ` Peter Hurley 2014-09-22 7:46 ` Heikki Krogerus 2014-09-22 7:46 ` Heikki Krogerus 2014-09-25 9:24 ` Sebastian Andrzej Siewior 2014-09-25 9:24 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 10/16] tty: serial: 8250_dma: optimize the xmit path due to UART_BUG_DMA_TX Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 11/16] tty: serial: 8250_dma: keep own book keeping about RX transfers Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 12/16] tty: serial: 8250_dma: handle the UART RDI event while DMA remains idle Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-29 9:23 ` Frans Klaver 2014-09-29 9:23 ` Frans Klaver 2014-09-29 9:23 ` Frans Klaver 2014-09-10 19:30 ` [PATCH 13/16] tty: serial: 8250_dma: add pm runtime Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-29 9:26 ` Frans Klaver 2014-09-29 9:26 ` Frans Klaver 2014-09-29 9:26 ` Frans Klaver 2014-09-29 9:56 ` Sebastian Andrzej Siewior 2014-09-29 9:56 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 14/16] arm: dts: am33xx: add DMA properties for UART Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 15/16] arm: dts: dra7: " Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-10 19:30 ` [PATCH 16/16] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior 2014-09-10 19:30 ` Sebastian Andrzej Siewior 2014-09-12 22:43 ` [PATCH 00/16 v9] omap 8250 based uart + DMA Tony Lindgren 2014-09-12 22:43 ` Tony Lindgren 2014-09-12 22:43 ` Tony Lindgren 2014-09-15 11:50 ` Sebastian Andrzej Siewior 2014-09-15 11:50 ` Sebastian Andrzej Siewior 2014-09-15 11:50 ` Sebastian Andrzej Siewior 2014-09-16 12:57 ` Sebastian Andrzej Siewior 2014-09-16 12:57 ` Sebastian Andrzej Siewior 2014-09-16 12:57 ` Sebastian Andrzej Siewior 2014-09-16 16:48 ` Tony Lindgren 2014-09-16 16:48 ` Tony Lindgren 2014-09-16 21:30 ` Tony Lindgren 2014-09-16 21:30 ` Tony Lindgren 2014-09-16 21:30 ` Tony Lindgren 2014-09-17 8:38 ` Sebastian Andrzej Siewior 2014-09-17 8:38 ` Sebastian Andrzej Siewior 2014-09-17 9:05 ` Sebastian Andrzej Siewior 2014-09-17 9:05 ` Sebastian Andrzej Siewior 2014-09-26 16:02 ` Greg KH 2014-09-26 16:02 ` Greg KH 2014-09-26 16:02 ` Greg KH
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20140929161505.GF13142@linutronix.de \ --to=bigeasy@linutronix.de \ --cc=alan@linux.intel.com \ --cc=balbi@ti.com \ --cc=gregkh@linuxfoundation.org \ --cc=heikki.krogerus@linux.intel.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=peter@hurleysoftware.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.