[PATCH 3.14 00/37] 3.14.22-stable review

[PATCH 3.14 00/37] 3.14.22-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.14.22 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Oct 15 02:23:50 UTC 2014.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.22-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.14.22-rc1

Bryan O'Donoghue <pure.logic@nexus-software.ie>
    serial: 8250: Add Quark X1000 to 8250_pci.c

Cristian Stoica <cristian.stoica@freescale.com>
    crypto: caam - fix addressing of struct member

Felipe Balbi <balbi@ti.com>
    usb: musb: dsps: kill OTG timer on suspend

Andreas Bomholtz <andreas@seluxit.com>
    USB: cp210x: add support for Seluxit USB dongle

Joe Savage <joe.savage@goketra.com>
    USB: serial: cp210x: added Ketra N1 wireless interface support

Lu Baolu <baolu.lu@linux.intel.com>
    USB: Add device quirk for ASUS T100 Base Station keyboard

Per Hurtig <per.hurtig@kau.se>
    tcp: fixing TLP's FIN recovery

Vlad Yasevich <vyasevich@gmail.com>
    sctp: handle association restarts when the socket is closed.

Joe Lawrence <Joe.Lawrence@stratus.com>
    team: avoid race condition in scheduling delayed work

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    ip6_gre: fix flowi6_proto value in xmit path

KY Srinivasan <kys@microsoft.com>
    hyperv: Fix a bug in netvsc_start_xmit()

Eric Dumazet <edumazet@google.com>
    gro: fix aggregation for skb using frag_list

Soren Brinkmann <soren.brinkmann@xilinx.com>
    Revert "net/macb: add pinctrl consumer support"

Vlad Yasevich <vyasevich@gmail.com>
    macvtap: Fix race between device delete and open.

Steffen Klassert <steffen.klassert@secunet.com>
    xfrm: Generate queueing routes only from route lookup functions

Steffen Klassert <steffen.klassert@secunet.com>
    xfrm: Generate blackhole routes only from route lookup functions

Vlad Yasevich <vyasevich@gmail.com>
    tg3: Allow for recieve of full-size 8021AD frames

Vlad Yasevich <vyasevich@gmail.com>
    tg3: Work around HW/FW limitations with vlan encapsulated frames

Francesco Ruggeri <fruggeri@arista.com>
    net: allow macvlans to move to net namespace

Vlad Yasevich <vyasevich@gmail.com>
    bridge: Fix br_should_learn to check vlan_enabled

Vlad Yasevich <vyasevich@gmail.com>
    bridge: Check if vlan filtering is enabled only once.

WANG Cong <xiyou.wangcong@gmail.com>
    ipv6: restore the behavior of ipv6_sock_ac_drop()

Nikolay Aleksandrov <nikolay@redhat.com>
    bonding: fix div by zero while enslaving and transmitting

Sabrina Dubroca <sd@queasysnail.net>
    ipv6: fix rtnl locking in setsockopt for anycast and multicast

Guillaume Nault <g.nault@alphalink.fr>
    l2tp: fix race while getting PMTU on PPP pseudo-wire

Gerhard Stenzel <gstenzel@linux.vnet.ibm.com>
    vxlan: fix incorrect initializer in union vxlan_addr

Jiri Benc <jbenc@redhat.com>
    openvswitch: fix panic with multiple vlan headers

Eric Dumazet <edumazet@google.com>
    packet: handle too big packets for PACKET_V3

Neal Cardwell <ncardwell@google.com>
    tcp: fix ssthresh and undo for consecutive short FRTO episodes

Neal Cardwell <ncardwell@google.com>
    tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()

Shmulik Ladkani <shmulik.ladkani@gmail.com>
    sit: Fix ipip6_tunnel_lookup device matching criteria

Andrey Vagin <avagin@openvz.org>
    tcp: don't use timestamp from repaired skb-s to calculate RTT (v2)

Neerav Parikh <neerav.parikh@intel.com>
    i40e: Don't stop driver probe when querying DCB config fails

Stanislaw Gruszka <sgruszka@redhat.com>
    myri10ge: check for DMA mapping errors

Vlad Yasevich <vyasevic@redhat.com>
    net: Always untag vlan-tagged traffic on input.

Jiri Benc <jbenc@redhat.com>
    rtnetlink: fix VF info size

Daniel Borkmann <dborkman@redhat.com>
    netlink: reset network header before passing to taps


-------------

Diffstat:

 Makefile                                         |  4 +-
 drivers/crypto/caam/caamhash.c                   |  6 +-
 drivers/net/bonding/bond_main.c                  | 17 ++++-
 drivers/net/ethernet/broadcom/tg3.c              | 23 ++++++-
 drivers/net/ethernet/cadence/macb.c              | 11 ---
 drivers/net/ethernet/intel/i40e/i40e_main.c      |  8 +--
 drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 88 ++++++++++++++++--------
 drivers/net/hyperv/netvsc_drv.c                  |  3 +-
 drivers/net/macvlan.c                            |  1 +
 drivers/net/macvtap.c                            | 18 +++--
 drivers/net/team/team.c                          |  4 +-
 drivers/net/vxlan.c                              |  8 +--
 drivers/tty/serial/8250/8250_pci.c               | 21 ++++++
 drivers/usb/core/hub.c                           |  6 +-
 drivers/usb/core/quirks.c                        |  4 ++
 drivers/usb/musb/musb_dsps.c                     |  2 +
 drivers/usb/serial/cp210x.c                      |  2 +
 include/linux/if_vlan.h                          |  6 --
 include/linux/skbuff.h                           |  1 +
 include/linux/usb/quirks.h                       |  3 +
 include/net/dst.h                                | 16 ++++-
 include/net/inet_connection_sock.h               |  1 +
 include/net/sctp/command.h                       |  2 +-
 include/net/sock.h                               |  1 -
 include/net/tcp.h                                |  5 +-
 net/8021q/vlan_core.c                            | 53 --------------
 net/bridge/br_private.h                          |  3 +
 net/bridge/br_vlan.c                             | 15 ++--
 net/core/dev.c                                   |  2 +-
 net/core/netpoll.c                               |  2 +-
 net/core/rtnetlink.c                             |  3 +-
 net/core/skbuff.c                                | 56 +++++++++++++++
 net/ipv4/route.c                                 |  6 +-
 net/ipv4/tcp.c                                   | 14 ++--
 net/ipv4/tcp_input.c                             |  8 +--
 net/ipv4/tcp_ipv4.c                              |  5 +-
 net/ipv4/tcp_output.c                            | 11 +--
 net/ipv6/addrconf.c                              | 15 ++--
 net/ipv6/anycast.c                               | 10 +++
 net/ipv6/ip6_gre.c                               |  4 +-
 net/ipv6/ip6_output.c                            |  4 +-
 net/ipv6/mcast.c                                 | 14 ++++
 net/ipv6/sit.c                                   |  6 +-
 net/ipv6/tcp_ipv6.c                              |  3 +-
 net/l2tp/l2tp_ppp.c                              |  3 +-
 net/netlink/af_netlink.c                         |  2 +-
 net/openvswitch/actions.c                        |  5 ++
 net/packet/af_packet.c                           | 17 +++++
 net/packet/internal.h                            |  1 +
 net/sctp/sm_statefuns.c                          | 19 ++++-
 net/xfrm/xfrm_policy.c                           | 48 ++++++++++---
 51 files changed, 392 insertions(+), 198 deletions(-)

[PATCH 3.14 01/37] netlink: reset network header before passing to taps

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <dborkman@redhat.com>

[ Upstream commit 4e48ed883c72e78c5a910f8831ffe90c9b18f0ec ]

netlink doesn't set any network header offset thus when the skb is
being passed to tap devices via dev_queue_xmit_nit(), it emits klog
false positives due to it being unset like:

  ...
  [  124.990397] protocol 0000 is buggy, dev nlmon0
  [  124.990411] protocol 0000 is buggy, dev nlmon0
  ...

So just reset the network header before passing to the device; for
packet sockets that just means nothing will change - mac and net
offset hold the same value just as before.

Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netlink/af_netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -205,7 +205,7 @@ static int __netlink_deliver_tap_skb(str
 		nskb->protocol = htons((u16) sk->sk_protocol);
 		nskb->pkt_type = netlink_is_kernel(sk) ?
 				 PACKET_KERNEL : PACKET_USER;
-
+		skb_reset_network_header(nskb);
 		ret = dev_queue_xmit(nskb);
 		if (unlikely(ret > 0))
 			ret = net_xmit_errno(ret);

[PATCH 3.14 02/37] rtnetlink: fix VF info size

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit 945a36761fd7877660f630bbdeb4ff9ff80d1935 ]

Commit 1d8faf48c74b8 ("net/core: Add VF link state control") added new
attribute to IFLA_VF_INFO group in rtnl_fill_ifinfo but did not adjust size
of the allocated memory in if_nlmsg_size/rtnl_vfinfo_size. As the result, we
may trigger warnings in rtnl_getlink and similar functions when many VF
links are enabled, as the information does not fit into the allocated skb.

Fixes: 1d8faf48c74b8 ("net/core: Add VF link state control")
Reported-by: Yulong Pei <ypei@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -799,7 +799,8 @@ static inline int rtnl_vfinfo_size(const
 			(nla_total_size(sizeof(struct ifla_vf_mac)) +
 			 nla_total_size(sizeof(struct ifla_vf_vlan)) +
 			 nla_total_size(sizeof(struct ifla_vf_tx_rate)) +
-			 nla_total_size(sizeof(struct ifla_vf_spoofchk)));
+			 nla_total_size(sizeof(struct ifla_vf_spoofchk)) +
+			 nla_total_size(sizeof(struct ifla_vf_link_state)));
 		return size;
 	} else
 		return 0;

[PATCH 3.14 03/37] net: Always untag vlan-tagged traffic on input.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevic@redhat.com>

[ Upstream commit 0d5501c1c828fb97d02af50aa9d2b1a5498b94e4 ]

Currently the functionality to untag traffic on input resides
as part of the vlan module and is build only when VLAN support
is enabled in the kernel.  When VLAN is disabled, the function
vlan_untag() turns into a stub and doesn't really untag the
packets.  This seems to create an interesting interaction
between VMs supporting checksum offloading and some network drivers.

There are some drivers that do not allow the user to change
tx-vlan-offload feature of the driver.  These drivers also seem
to assume that any VLAN-tagged traffic they transmit will
have the vlan information in the vlan_tci and not in the vlan
header already in the skb.  When transmitting skbs that already
have tagged data with partial checksum set, the checksum doesn't
appear to be updated correctly by the card thus resulting in a
failure to establish TCP connections.

The following is a packet trace taken on the receiver where a
sender is a VM with a VLAN configued.  The host VM is running on
doest not have VLAN support and the outging interface on the
host is tg3:
10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294837885 ecr 0,nop,wscale 7], length 0
10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q
(0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244,
offset 0, flags [DF], proto TCP (6), length 60)
    10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect
-> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val
4294838888 ecr 0,nop,wscale 7], length 0

This connection finally times out.

I've only access to the TG3 hardware in this configuration thus have
only tested this with TG3 driver.  There are a lot of other drivers
that do not permit user changes to vlan acceleration features, and
I don't know if they all suffere from a similar issue.

The patch attempt to fix this another way.  It moves the vlan header
stipping code out of the vlan module and always builds it into the
kernel network core.  This way, even if vlan is not supported on
a virtualizatoin host, the virtual machines running on top of such
host will still work with VLANs enabled.

CC: Patrick McHardy <kaber@trash.net>
CC: Nithin Nayak Sujir <nsujir@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/if_vlan.h |    6 -----
 include/linux/skbuff.h  |    1 
 net/8021q/vlan_core.c   |   53 ------------------------------------------------
 net/bridge/br_vlan.c    |    2 -
 net/core/dev.c          |    2 -
 net/core/netpoll.c      |    2 -
 net/core/skbuff.c       |   53 ++++++++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 57 insertions(+), 62 deletions(-)

--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -186,7 +186,6 @@ vlan_dev_get_egress_qos_mask(struct net_
 }
 
 extern bool vlan_do_receive(struct sk_buff **skb);
-extern struct sk_buff *vlan_untag(struct sk_buff *skb);
 
 extern int vlan_vid_add(struct net_device *dev, __be16 proto, u16 vid);
 extern void vlan_vid_del(struct net_device *dev, __be16 proto, u16 vid);
@@ -228,11 +227,6 @@ static inline bool vlan_do_receive(struc
 	return false;
 }
 
-static inline struct sk_buff *vlan_untag(struct sk_buff *skb)
-{
-	return skb;
-}
-
 static inline int vlan_vid_add(struct net_device *dev, __be16 proto, u16 vid)
 {
 	return 0;
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2458,6 +2458,7 @@ int skb_shift(struct sk_buff *tgt, struc
 void skb_scrub_packet(struct sk_buff *skb, bool xnet);
 unsigned int skb_gso_transport_seglen(const struct sk_buff *skb);
 struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features);
+struct sk_buff *skb_vlan_untag(struct sk_buff *skb);
 
 struct skb_checksum_ops {
 	__wsum (*update)(const void *mem, int len, __wsum wsum);
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -106,59 +106,6 @@ u16 vlan_dev_vlan_id(const struct net_de
 }
 EXPORT_SYMBOL(vlan_dev_vlan_id);
 
-static struct sk_buff *vlan_reorder_header(struct sk_buff *skb)
-{
-	if (skb_cow(skb, skb_headroom(skb)) < 0) {
-		kfree_skb(skb);
-		return NULL;
-	}
-
-	memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
-	skb->mac_header += VLAN_HLEN;
-	return skb;
-}
-
-struct sk_buff *vlan_untag(struct sk_buff *skb)
-{
-	struct vlan_hdr *vhdr;
-	u16 vlan_tci;
-
-	if (unlikely(vlan_tx_tag_present(skb))) {
-		/* vlan_tci is already set-up so leave this for another time */
-		return skb;
-	}
-
-	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (unlikely(!skb))
-		goto err_free;
-
-	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
-		goto err_free;
-
-	vhdr = (struct vlan_hdr *) skb->data;
-	vlan_tci = ntohs(vhdr->h_vlan_TCI);
-	__vlan_hwaccel_put_tag(skb, skb->protocol, vlan_tci);
-
-	skb_pull_rcsum(skb, VLAN_HLEN);
-	vlan_set_encap_proto(skb, vhdr);
-
-	skb = vlan_reorder_header(skb);
-	if (unlikely(!skb))
-		goto err_free;
-
-	skb_reset_network_header(skb);
-	skb_reset_transport_header(skb);
-	skb_reset_mac_len(skb);
-
-	return skb;
-
-err_free:
-	kfree_skb(skb);
-	return NULL;
-}
-EXPORT_SYMBOL(vlan_untag);
-
-
 /*
  * vlan info and vid list
  */
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -179,7 +179,7 @@ bool br_allowed_ingress(struct net_bridg
 	if (unlikely(!vlan_tx_tag_present(skb) &&
 		     (skb->protocol == htons(ETH_P_8021Q) ||
 		      skb->protocol == htons(ETH_P_8021AD)))) {
-		skb = vlan_untag(skb);
+		skb = skb_vlan_untag(skb);
 		if (unlikely(!skb))
 			return false;
 	}
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3554,7 +3554,7 @@ another_round:
 
 	if (skb->protocol == cpu_to_be16(ETH_P_8021Q) ||
 	    skb->protocol == cpu_to_be16(ETH_P_8021AD)) {
-		skb = vlan_untag(skb);
+		skb = skb_vlan_untag(skb);
 		if (unlikely(!skb))
 			goto unlock;
 	}
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -788,7 +788,7 @@ int __netpoll_rx(struct sk_buff *skb, st
 	}
 
 	if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) {
-		skb = vlan_untag(skb);
+		skb = skb_vlan_untag(skb);
 		if (unlikely(!skb))
 			goto out;
 	}
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -62,6 +62,7 @@
 #include <linux/scatterlist.h>
 #include <linux/errqueue.h>
 #include <linux/prefetch.h>
+#include <linux/if_vlan.h>
 
 #include <net/protocol.h>
 #include <net/dst.h>
@@ -3963,3 +3964,55 @@ unsigned int skb_gso_transport_seglen(co
 	return shinfo->gso_size;
 }
 EXPORT_SYMBOL_GPL(skb_gso_transport_seglen);
+
+static struct sk_buff *skb_reorder_vlan_header(struct sk_buff *skb)
+{
+	if (skb_cow(skb, skb_headroom(skb)) < 0) {
+		kfree_skb(skb);
+		return NULL;
+	}
+
+	memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
+	skb->mac_header += VLAN_HLEN;
+	return skb;
+}
+
+struct sk_buff *skb_vlan_untag(struct sk_buff *skb)
+{
+	struct vlan_hdr *vhdr;
+	u16 vlan_tci;
+
+	if (unlikely(vlan_tx_tag_present(skb))) {
+		/* vlan_tci is already set-up so leave this for another time */
+		return skb;
+	}
+
+	skb = skb_share_check(skb, GFP_ATOMIC);
+	if (unlikely(!skb))
+		goto err_free;
+
+	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
+		goto err_free;
+
+	vhdr = (struct vlan_hdr *)skb->data;
+	vlan_tci = ntohs(vhdr->h_vlan_TCI);
+	__vlan_hwaccel_put_tag(skb, skb->protocol, vlan_tci);
+
+	skb_pull_rcsum(skb, VLAN_HLEN);
+	vlan_set_encap_proto(skb, vhdr);
+
+	skb = skb_reorder_vlan_header(skb);
+	if (unlikely(!skb))
+		goto err_free;
+
+	skb_reset_network_header(skb);
+	skb_reset_transport_header(skb);
+	skb_reset_mac_len(skb);
+
+	return skb;
+
+err_free:
+	kfree_skb(skb);
+	return NULL;
+}
+EXPORT_SYMBOL(skb_vlan_untag);

[PATCH 3.14 04/37] myri10ge: check for DMA mapping errors

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

[ Upstream commit 10545937e866ccdbb7ab583031dbdcc6b14e4eb4 ]

On IOMMU systems DMA mapping can fail, we need to check for
that possibility.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/myricom/myri10ge/myri10ge.c |   88 +++++++++++++++--------
 1 file changed, 58 insertions(+), 30 deletions(-)

--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
@@ -872,6 +872,10 @@ static int myri10ge_dma_test(struct myri
 		return -ENOMEM;
 	dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
 				   DMA_BIDIRECTIONAL);
+	if (unlikely(pci_dma_mapping_error(mgp->pdev, dmatest_bus))) {
+		__free_page(dmatest_page);
+		return -ENOMEM;
+	}
 
 	/* Run a small DMA test.
 	 * The magic multipliers to the length tell the firmware
@@ -1293,6 +1297,7 @@ myri10ge_alloc_rx_pages(struct myri10ge_
 			int bytes, int watchdog)
 {
 	struct page *page;
+	dma_addr_t bus;
 	int idx;
 #if MYRI10GE_ALLOC_SIZE > 4096
 	int end_offset;
@@ -1317,11 +1322,21 @@ myri10ge_alloc_rx_pages(struct myri10ge_
 					rx->watchdog_needed = 1;
 				return;
 			}
+
+			bus = pci_map_page(mgp->pdev, page, 0,
+					   MYRI10GE_ALLOC_SIZE,
+					   PCI_DMA_FROMDEVICE);
+			if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
+				__free_pages(page, MYRI10GE_ALLOC_ORDER);
+				if (rx->fill_cnt - rx->cnt < 16)
+					rx->watchdog_needed = 1;
+				return;
+			}
+
 			rx->page = page;
 			rx->page_offset = 0;
-			rx->bus = pci_map_page(mgp->pdev, page, 0,
-					       MYRI10GE_ALLOC_SIZE,
-					       PCI_DMA_FROMDEVICE);
+			rx->bus = bus;
+
 		}
 		rx->info[idx].page = rx->page;
 		rx->info[idx].page_offset = rx->page_offset;
@@ -2765,6 +2780,35 @@ myri10ge_submit_req(struct myri10ge_tx_b
 	mb();
 }
 
+static void myri10ge_unmap_tx_dma(struct myri10ge_priv *mgp,
+				  struct myri10ge_tx_buf *tx, int idx)
+{
+	unsigned int len;
+	int last_idx;
+
+	/* Free any DMA resources we've alloced and clear out the skb slot */
+	last_idx = (idx + 1) & tx->mask;
+	idx = tx->req & tx->mask;
+	do {
+		len = dma_unmap_len(&tx->info[idx], len);
+		if (len) {
+			if (tx->info[idx].skb != NULL)
+				pci_unmap_single(mgp->pdev,
+						 dma_unmap_addr(&tx->info[idx],
+								bus), len,
+						 PCI_DMA_TODEVICE);
+			else
+				pci_unmap_page(mgp->pdev,
+					       dma_unmap_addr(&tx->info[idx],
+							      bus), len,
+					       PCI_DMA_TODEVICE);
+			dma_unmap_len_set(&tx->info[idx], len, 0);
+			tx->info[idx].skb = NULL;
+		}
+		idx = (idx + 1) & tx->mask;
+	} while (idx != last_idx);
+}
+
 /*
  * Transmit a packet.  We need to split the packet so that a single
  * segment does not cross myri10ge->tx_boundary, so this makes segment
@@ -2788,7 +2832,7 @@ static netdev_tx_t myri10ge_xmit(struct
 	u32 low;
 	__be32 high_swapped;
 	unsigned int len;
-	int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
+	int idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
 	u16 pseudo_hdr_offset, cksum_offset, queue;
 	int cum_len, seglen, boundary, rdma_count;
 	u8 flags, odd_flag;
@@ -2885,9 +2929,12 @@ again:
 
 	/* map the skb for DMA */
 	len = skb_headlen(skb);
+	bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
+	if (unlikely(pci_dma_mapping_error(mgp->pdev, bus)))
+		goto drop;
+
 	idx = tx->req & tx->mask;
 	tx->info[idx].skb = skb;
-	bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
 	dma_unmap_addr_set(&tx->info[idx], bus, bus);
 	dma_unmap_len_set(&tx->info[idx], len, len);
 
@@ -2986,12 +3033,16 @@ again:
 			break;
 
 		/* map next fragment for DMA */
-		idx = (count + tx->req) & tx->mask;
 		frag = &skb_shinfo(skb)->frags[frag_idx];
 		frag_idx++;
 		len = skb_frag_size(frag);
 		bus = skb_frag_dma_map(&mgp->pdev->dev, frag, 0, len,
 				       DMA_TO_DEVICE);
+		if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
+			myri10ge_unmap_tx_dma(mgp, tx, idx);
+			goto drop;
+		}
+		idx = (count + tx->req) & tx->mask;
 		dma_unmap_addr_set(&tx->info[idx], bus, bus);
 		dma_unmap_len_set(&tx->info[idx], len, len);
 	}
@@ -3022,31 +3073,8 @@ again:
 	return NETDEV_TX_OK;
 
 abort_linearize:
-	/* Free any DMA resources we've alloced and clear out the skb
-	 * slot so as to not trip up assertions, and to avoid a
-	 * double-free if linearizing fails */
+	myri10ge_unmap_tx_dma(mgp, tx, idx);
 
-	last_idx = (idx + 1) & tx->mask;
-	idx = tx->req & tx->mask;
-	tx->info[idx].skb = NULL;
-	do {
-		len = dma_unmap_len(&tx->info[idx], len);
-		if (len) {
-			if (tx->info[idx].skb != NULL)
-				pci_unmap_single(mgp->pdev,
-						 dma_unmap_addr(&tx->info[idx],
-								bus), len,
-						 PCI_DMA_TODEVICE);
-			else
-				pci_unmap_page(mgp->pdev,
-					       dma_unmap_addr(&tx->info[idx],
-							      bus), len,
-					       PCI_DMA_TODEVICE);
-			dma_unmap_len_set(&tx->info[idx], len, 0);
-			tx->info[idx].skb = NULL;
-		}
-		idx = (idx + 1) & tx->mask;
-	} while (idx != last_idx);
 	if (skb_is_gso(skb)) {
 		netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
 		goto drop;

[PATCH 3.14 05/37] i40e: Dont stop driver probe when querying DCB config fails

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neerav Parikh <neerav.parikh@intel.com>

Commit id: 014269ff376f552363ecdab78d3d947fbe2237d9 in Linus's tree
should be queued up for stable 3.14 & 3.15 since the i40e driver will
not load when DCB is enabled, unless this patch is applied.

In case of any AQ command to query port's DCB configuration fails
during driver's probe time; the probe fails and returns an error.

This patch prevents this issue by continuing the driver probe even
when an error is returned.

Also, added an error message to dump the AQ error status to show what
error caused the failure to get the DCB configuration from firmware.

Change-ID: Ifd5663512588bca684069bb7d4fb586dd72221af
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4024,6 +4024,9 @@ static int i40e_init_pf_dcb(struct i40e_
 				       DCB_CAP_DCBX_VER_IEEE;
 			pf->flags |= I40E_FLAG_DCB_ENABLED;
 		}
+	} else {
+		dev_info(&pf->pdev->dev, "AQ Querying DCB configuration failed: %d\n",
+			 pf->hw.aq.asq_last_status);
 	}
 
 out:
@@ -8003,7 +8006,7 @@ static int i40e_probe(struct pci_dev *pd
 	if (err) {
 		dev_info(&pdev->dev, "init_pf_dcb failed: %d\n", err);
 		pf->flags &= ~I40E_FLAG_DCB_ENABLED;
-		goto err_init_dcb;
+		/* Continue without DCB enabled */
 	}
 #endif /* CONFIG_I40E_DCB */
 
@@ -8119,9 +8122,6 @@ err_vsis:
 err_switch_setup:
 	i40e_reset_interrupt_capability(pf);
 	del_timer_sync(&pf->service_timer);
-#ifdef CONFIG_I40E_DCB
-err_init_dcb:
-#endif /* CONFIG_I40E_DCB */
 err_mac_addr:
 err_configure_lan_hmc:
 	(void)i40e_shutdown_lan_hmc(hw);

[PATCH 3.14 06/37] tcp: dont use timestamp from repaired skb-s to calculate RTT (v2)

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Vagin <avagin@openvz.org>

[ Upstream commit 9d186cac7ffb1831e9f34cb4a3a8b22abb9dd9d4 ]

We don't know right timestamp for repaired skb-s. Wrong RTT estimations
isn't good, because some congestion modules heavily depends on it.

This patch adds the TCPCB_REPAIRED flag, which is included in
TCPCB_RETRANS.

Thanks to Eric for the advice how to fix this issue.

This patch fixes the warning:
[  879.562947] WARNING: CPU: 0 PID: 2825 at net/ipv4/tcp_input.c:3078 tcp_ack+0x11f5/0x1380()
[  879.567253] CPU: 0 PID: 2825 Comm: socket-tcpbuf-l Not tainted 3.16.0-next-20140811 #1
[  879.567829] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  879.568177]  0000000000000000 00000000c532680c ffff880039643d00 ffffffff817aa2d2
[  879.568776]  0000000000000000 ffff880039643d38 ffffffff8109afbd ffff880039d6ba80
[  879.569386]  ffff88003a449800 000000002983d6bd 0000000000000000 000000002983d6bc
[  879.569982] Call Trace:
[  879.570264]  [<ffffffff817aa2d2>] dump_stack+0x4d/0x66
[  879.570599]  [<ffffffff8109afbd>] warn_slowpath_common+0x7d/0xa0
[  879.570935]  [<ffffffff8109b0ea>] warn_slowpath_null+0x1a/0x20
[  879.571292]  [<ffffffff816d0a05>] tcp_ack+0x11f5/0x1380
[  879.571614]  [<ffffffff816d10bd>] tcp_rcv_established+0x1ed/0x710
[  879.571958]  [<ffffffff816dc9da>] tcp_v4_do_rcv+0x10a/0x370
[  879.572315]  [<ffffffff81657459>] release_sock+0x89/0x1d0
[  879.572642]  [<ffffffff816c81a0>] do_tcp_setsockopt.isra.36+0x120/0x860
[  879.573000]  [<ffffffff8110a52e>] ? rcu_read_lock_held+0x6e/0x80
[  879.573352]  [<ffffffff816c8912>] tcp_setsockopt+0x32/0x40
[  879.573678]  [<ffffffff81654ac4>] sock_common_setsockopt+0x14/0x20
[  879.574031]  [<ffffffff816537b0>] SyS_setsockopt+0x80/0xf0
[  879.574393]  [<ffffffff817b40a9>] system_call_fastpath+0x16/0x1b
[  879.574730] ---[ end trace a17cbc38eb8c5c00 ]---

v2: moving setting of skb->when for repaired skb-s in tcp_write_xmit,
    where it's set for other skb-s.

Fixes: 431a91242d8d ("tcp: timestamp SYN+DATA messages")
Fixes: 740b0f1841f6 ("tcp: switch rtt estimations to usec resolution")
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/tcp.h     |    4 +++-
 net/ipv4/tcp.c        |   14 +++++++-------
 net/ipv4/tcp_output.c |    5 ++++-
 3 files changed, 14 insertions(+), 9 deletions(-)

--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -720,8 +720,10 @@ struct tcp_skb_cb {
 #define TCPCB_SACKED_RETRANS	0x02	/* SKB retransmitted		*/
 #define TCPCB_LOST		0x04	/* SKB is lost			*/
 #define TCPCB_TAGBITS		0x07	/* All tag bits			*/
+#define TCPCB_REPAIRED		0x10	/* SKB repaired (no skb_mstamp)	*/
 #define TCPCB_EVER_RETRANS	0x80	/* Ever retransmitted frame	*/
-#define TCPCB_RETRANS		(TCPCB_SACKED_RETRANS|TCPCB_EVER_RETRANS)
+#define TCPCB_RETRANS		(TCPCB_SACKED_RETRANS|TCPCB_EVER_RETRANS| \
+				TCPCB_REPAIRED)
 
 	__u8		ip_dsfield;	/* IPv4 tos or IPv6 dsfield	*/
 	/* 1 byte hole */
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1175,13 +1175,6 @@ new_segment:
 					goto wait_for_memory;
 
 				/*
-				 * All packets are restored as if they have
-				 * already been sent.
-				 */
-				if (tp->repair)
-					TCP_SKB_CB(skb)->when = tcp_time_stamp;
-
-				/*
 				 * Check whether we can use HW checksum.
 				 */
 				if (sk->sk_route_caps & NETIF_F_ALL_CSUM)
@@ -1190,6 +1183,13 @@ new_segment:
 				skb_entail(sk, skb);
 				copy = size_goal;
 				max = size_goal;
+
+				/* All packets are restored as if they have
+				 * already been sent. skb_mstamp isn't set to
+				 * avoid wrong rtt estimation.
+				 */
+				if (tp->repair)
+					TCP_SKB_CB(skb)->sacked |= TCPCB_REPAIRED;
 			}
 
 			/* Try to append data to the end of skb. */
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1876,8 +1876,11 @@ static bool tcp_write_xmit(struct sock *
 		tso_segs = tcp_init_tso_segs(sk, skb, mss_now);
 		BUG_ON(!tso_segs);
 
-		if (unlikely(tp->repair) && tp->repair_queue == TCP_SEND_QUEUE)
+		if (unlikely(tp->repair) && tp->repair_queue == TCP_SEND_QUEUE) {
+			/* "when" is used as a start point for the retransmit timer */
+			TCP_SKB_CB(skb)->when = tcp_time_stamp;
 			goto repair; /* Skip network transmission */
+		}
 
 		cwnd_quota = tcp_cwnd_test(tp, skb);
 		if (!cwnd_quota) {

[PATCH 3.14 07/37] sit: Fix ipip6_tunnel_lookup device matching criteria

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shmulik Ladkani <shmulik.ladkani@gmail.com>

[ Upstream commit bc8fc7b8f825ef17a0fb9e68c18ce94fa66ab337 ]

As of 4fddbf5d78 ("sit: strictly restrict incoming traffic to tunnel link device"),
when looking up a tunnel, tunnel's underlying interface (t->parms.link)
is verified to match incoming traffic's ingress device.

However the comparison was incorrectly based on skb->dev->iflink.

Instead, dev->ifindex should be used, which correctly represents the
interface from which the IP stack hands the ipip6 packets.

This allows setting up sit tunnels bound to vlan interfaces (otherwise
incoming ipip6 traffic on the vlan interface was dropped due to
ipip6_tunnel_lookup match failure).

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/sit.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -101,19 +101,19 @@ static struct ip_tunnel *ipip6_tunnel_lo
 	for_each_ip_tunnel_rcu(t, sitn->tunnels_r_l[h0 ^ h1]) {
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr &&
-		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (!dev || !t->parms.link || dev->ifindex == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
 	for_each_ip_tunnel_rcu(t, sitn->tunnels_r[h0]) {
 		if (remote == t->parms.iph.daddr &&
-		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (!dev || !t->parms.link || dev->ifindex == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
 	for_each_ip_tunnel_rcu(t, sitn->tunnels_l[h1]) {
 		if (local == t->parms.iph.saddr &&
-		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
+		    (!dev || !t->parms.link || dev->ifindex == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}

[PATCH 3.14 08/37] tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 4fab9071950c2021d846e18351e0f46a1cffd67b ]

Make sure we use the correct address-family-specific function for
handling MTU reductions from within tcp_release_cb().

Previously AF_INET6 sockets were incorrectly always using the IPv6
code path when sometimes they were handling IPv4 traffic and thus had
an IPv4 dst.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Willem de Bruijn <willemb@google.com>
Fixes: 563d34d057862 ("tcp: dont drop MTU reduction indications")
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/inet_connection_sock.h |    1 +
 include/net/sock.h                 |    1 -
 include/net/tcp.h                  |    1 +
 net/ipv4/tcp_ipv4.c                |    5 +++--
 net/ipv4/tcp_output.c              |    2 +-
 net/ipv6/tcp_ipv6.c                |    3 ++-
 6 files changed, 8 insertions(+), 5 deletions(-)

--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -62,6 +62,7 @@ struct inet_connection_sock_af_ops {
 	void	    (*addr2sockaddr)(struct sock *sk, struct sockaddr *);
 	int	    (*bind_conflict)(const struct sock *sk,
 				     const struct inet_bind_bucket *tb, bool relax);
+	void	    (*mtu_reduced)(struct sock *sk);
 };
 
 /** inet_connection_sock - INET connection oriented sock
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -969,7 +969,6 @@ struct proto {
 						struct sk_buff *skb);
 
 	void		(*release_cb)(struct sock *sk);
-	void		(*mtu_reduced)(struct sock *sk);
 
 	/* Keeping track of sk's, looking them up, and port selection methods. */
 	void			(*hash)(struct sock *sk);
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -453,6 +453,7 @@ const u8 *tcp_parse_md5sig_option(const
  */
 
 void tcp_v4_send_check(struct sock *sk, struct sk_buff *skb);
+void tcp_v4_mtu_reduced(struct sock *sk);
 int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb);
 struct sock *tcp_create_openreq_child(struct sock *sk,
 				      struct request_sock *req,
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -269,7 +269,7 @@ EXPORT_SYMBOL(tcp_v4_connect);
  * It can be called through tcp_release_cb() if socket was owned by user
  * at the time tcp_v4_err() was called to handle ICMP message.
  */
-static void tcp_v4_mtu_reduced(struct sock *sk)
+void tcp_v4_mtu_reduced(struct sock *sk)
 {
 	struct dst_entry *dst;
 	struct inet_sock *inet = inet_sk(sk);
@@ -300,6 +300,7 @@ static void tcp_v4_mtu_reduced(struct so
 		tcp_simple_retransmit(sk);
 	} /* else let the usual retransmit timer handle it */
 }
+EXPORT_SYMBOL(tcp_v4_mtu_reduced);
 
 static void do_redirect(struct sk_buff *skb, struct sock *sk)
 {
@@ -2117,6 +2118,7 @@ const struct inet_connection_sock_af_ops
 	.compat_setsockopt = compat_ip_setsockopt,
 	.compat_getsockopt = compat_ip_getsockopt,
 #endif
+	.mtu_reduced	   = tcp_v4_mtu_reduced,
 };
 EXPORT_SYMBOL(ipv4_specific);
 
@@ -2736,7 +2738,6 @@ struct proto tcp_prot = {
 	.sendpage		= tcp_sendpage,
 	.backlog_rcv		= tcp_v4_do_rcv,
 	.release_cb		= tcp_release_cb,
-	.mtu_reduced		= tcp_v4_mtu_reduced,
 	.hash			= inet_hash,
 	.unhash			= inet_unhash,
 	.get_port		= inet_csk_get_port,
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -787,7 +787,7 @@ void tcp_release_cb(struct sock *sk)
 		__sock_put(sk);
 	}
 	if (flags & (1UL << TCP_MTU_REDUCED_DEFERRED)) {
-		sk->sk_prot->mtu_reduced(sk);
+		inet_csk(sk)->icsk_af_ops->mtu_reduced(sk);
 		__sock_put(sk);
 	}
 }
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1668,6 +1668,7 @@ static const struct inet_connection_sock
 	.compat_setsockopt = compat_ipv6_setsockopt,
 	.compat_getsockopt = compat_ipv6_getsockopt,
 #endif
+	.mtu_reduced	   = tcp_v6_mtu_reduced,
 };
 
 #ifdef CONFIG_TCP_MD5SIG
@@ -1699,6 +1700,7 @@ static const struct inet_connection_sock
 	.compat_setsockopt = compat_ipv6_setsockopt,
 	.compat_getsockopt = compat_ipv6_getsockopt,
 #endif
+	.mtu_reduced	   = tcp_v4_mtu_reduced,
 };
 
 #ifdef CONFIG_TCP_MD5SIG
@@ -1935,7 +1937,6 @@ struct proto tcpv6_prot = {
 	.sendpage		= tcp_sendpage,
 	.backlog_rcv		= tcp_v6_do_rcv,
 	.release_cb		= tcp_release_cb,
-	.mtu_reduced		= tcp_v6_mtu_reduced,
 	.hash			= tcp_v6_hash,
 	.unhash			= inet_unhash,
 	.get_port		= inet_csk_get_port,

[PATCH 3.14 09/37] tcp: fix ssthresh and undo for consecutive short FRTO episodes

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 0c9ab09223fe9922baeb22546c9a90d774a4bde6 ]

Fix TCP FRTO logic so that it always notices when snd_una advances,
indicating that any RTO after that point will be a new and distinct
loss episode.

Previously there was a very specific sequence that could cause FRTO to
fail to notice a new loss episode had started:

(1) RTO timer fires, enter FRTO and retransmit packet 1 in write queue
(2) receiver ACKs packet 1
(3) FRTO sends 2 more packets
(4) RTO timer fires again (should start a new loss episode)

The problem was in step (3) above, where tcp_process_loss() returned
early (in the spot marked "Step 2.b"), so that it never got to the
logic to clear icsk_retransmits. Thus icsk_retransmits stayed
non-zero. Thus in step (4) tcp_enter_loss() would see the non-zero
icsk_retransmits, decide that this RTO is not a new episode, and
decide not to cut ssthresh and remember the current cwnd and ssthresh
for undo.

There were two main consequences to the bug that we have
observed. First, ssthresh was not decreased in step (4). Second, when
there was a series of such FRTO (1-4) sequences that happened to be
followed by an FRTO undo, we would restore the cwnd and ssthresh from
before the entire series started (instead of the cwnd and ssthresh
from before the most recent RTO). This could result in cwnd and
ssthresh being restored to values much bigger than the proper values.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: e33099f96d99c ("tcp: implement RFC5682 F-RTO")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2678,7 +2678,6 @@ static void tcp_enter_recovery(struct so
  */
 static void tcp_process_loss(struct sock *sk, int flag, bool is_dupack)
 {
-	struct inet_connection_sock *icsk = inet_csk(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 	bool recovered = !before(tp->snd_una, tp->high_seq);
 
@@ -2704,12 +2703,9 @@ static void tcp_process_loss(struct sock
 
 	if (recovered) {
 		/* F-RTO RFC5682 sec 3.1 step 2.a and 1st part of step 3.a */
-		icsk->icsk_retransmits = 0;
 		tcp_try_undo_recovery(sk);
 		return;
 	}
-	if (flag & FLAG_DATA_ACKED)
-		icsk->icsk_retransmits = 0;
 	if (tcp_is_reno(tp)) {
 		/* A Reno DUPACK means new data in F-RTO step 2.b above are
 		 * delivered. Lower inflight to clock out (re)tranmissions.
@@ -3398,8 +3394,10 @@ static int tcp_ack(struct sock *sk, cons
 	    icsk->icsk_pending == ICSK_TIME_LOSS_PROBE)
 		tcp_rearm_rto(sk);
 
-	if (after(ack, prior_snd_una))
+	if (after(ack, prior_snd_una)) {
 		flag |= FLAG_SND_UNA_ADVANCED;
+		icsk->icsk_retransmits = 0;
+	}
 
 	prior_fackets = tp->fackets_out;
 	prior_in_flight = tcp_packets_in_flight(tp);

[PATCH 3.14 10/37] packet: handle too big packets for PACKET_V3

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit dc808110bb62b64a448696ecac3938902c92e1ab ]

af_packet can currently overwrite kernel memory by out of bound
accesses, because it assumed a [new] block can always hold one frame.

This is not generally the case, even if most existing tools do it right.

This patch clamps too long frames as API permits, and issue a one time
error on syslog.

[  394.357639] tpacket_rcv: packet too big, clamped from 5042 to 3966. macoff=82

In this example, packet header tp_snaplen was set to 3966,
and tp_len was set to 5042 (skb->len)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |   17 +++++++++++++++++
 net/packet/internal.h  |    1 +
 2 files changed, 18 insertions(+)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -635,6 +635,7 @@ static void init_prb_bdqc(struct packet_
 	p1->tov_in_jiffies = msecs_to_jiffies(p1->retire_blk_tov);
 	p1->blk_sizeof_priv = req_u->req3.tp_sizeof_priv;
 
+	p1->max_frame_len = p1->kblk_size - BLK_PLUS_PRIV(p1->blk_sizeof_priv);
 	prb_init_ft_ops(p1, req_u);
 	prb_setup_retire_blk_timer(po, tx_ring);
 	prb_open_block(p1, pbd);
@@ -1946,6 +1947,18 @@ static int tpacket_rcv(struct sk_buff *s
 			if ((int)snaplen < 0)
 				snaplen = 0;
 		}
+	} else if (unlikely(macoff + snaplen >
+			    GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len)) {
+		u32 nval;
+
+		nval = GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len - macoff;
+		pr_err_once("tpacket_rcv: packet too big, clamped from %u to %u. macoff=%u\n",
+			    snaplen, nval, macoff);
+		snaplen = nval;
+		if (unlikely((int)snaplen < 0)) {
+			snaplen = 0;
+			macoff = GET_PBDQC_FROM_RB(&po->rx_ring)->max_frame_len;
+		}
 	}
 	spin_lock(&sk->sk_receive_queue.lock);
 	h.raw = packet_current_rx_frame(po, skb,
@@ -3779,6 +3792,10 @@ static int packet_set_ring(struct sock *
 			goto out;
 		if (unlikely(req->tp_block_size & (PAGE_SIZE - 1)))
 			goto out;
+		if (po->tp_version >= TPACKET_V3 &&
+		    (int)(req->tp_block_size -
+			  BLK_PLUS_PRIV(req_u->req3.tp_sizeof_priv)) <= 0)
+			goto out;
 		if (unlikely(req->tp_frame_size < po->tp_hdrlen +
 					po->tp_reserve))
 			goto out;
--- a/net/packet/internal.h
+++ b/net/packet/internal.h
@@ -29,6 +29,7 @@ struct tpacket_kbdq_core {
 	char		*pkblk_start;
 	char		*pkblk_end;
 	int		kblk_size;
+	unsigned int	max_frame_len;
 	unsigned int	knum_blocks;
 	uint64_t	knxt_seq_num;
 	char		*prev;

[PATCH 3.14 11/37] openvswitch: fix panic with multiple vlan headers

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit 2ba5af42a7b59ef01f9081234d8855140738defd ]

When there are multiple vlan headers present in a received frame, the first
one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the
skb beyond the VLAN TPID may be still non-linear, including the inner TCI
and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it
does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is
executed, __pop_vlan_tci pulls the next vlan header into vlan_tci.

This leads to two things:

1. Part of the resulting ethernet header is in the non-linear part of the
   skb. When eth_type_trans is called later as the result of
   OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci
   is in fact accessing random data when it reads past the TPID.

2. network_header points into the ethernet header instead of behind it.
   mac_len is set to a wrong value (10), too.

Reported-by: Yulong Pei <ypei@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/actions.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -42,6 +42,9 @@ static int do_execute_actions(struct dat
 
 static int make_writable(struct sk_buff *skb, int write_len)
 {
+	if (!pskb_may_pull(skb, write_len))
+		return -ENOMEM;
+
 	if (!skb_cloned(skb) || skb_clone_writable(skb, write_len))
 		return 0;
 
@@ -70,6 +73,8 @@ static int __pop_vlan_tci(struct sk_buff
 
 	vlan_set_encap_proto(skb, vhdr);
 	skb->mac_header += VLAN_HLEN;
+	if (skb_network_offset(skb) < ETH_HLEN)
+		skb_set_network_header(skb, ETH_HLEN);
 	skb_reset_mac_len(skb);
 
 	return 0;

[PATCH 3.14 12/37] vxlan: fix incorrect initializer in union vxlan_addr

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gerhard Stenzel <gstenzel@linux.vnet.ibm.com>

[ Upstream commit a45e92a599e77ee6a850eabdd0141633fde03915 ]

The first initializer in the following

        union vxlan_addr ipa = {
            .sin.sin_addr.s_addr = tip,
            .sa.sa_family = AF_INET,
        };

is optimised away by the compiler, due to the second initializer,
therefore initialising .sin.sin_addr.s_addr always to 0.
This results in netlink messages indicating a L3 miss never contain the
missed IP address. This was observed with GCC 4.8 and 4.9. I do not know about previous versions.
The problem affects user space programs relying on an IP address being
sent as part of a netlink message indicating a L3 miss.

Changing
            .sa.sa_family = AF_INET,
to
            .sin.sin_family = AF_INET,
fixes the problem.

Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vxlan.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1334,7 +1334,7 @@ static int arp_reduce(struct net_device
 	} else if (vxlan->flags & VXLAN_F_L3MISS) {
 		union vxlan_addr ipa = {
 			.sin.sin_addr.s_addr = tip,
-			.sa.sa_family = AF_INET,
+			.sin.sin_family = AF_INET,
 		};
 
 		vxlan_ip_miss(dev, &ipa);
@@ -1495,7 +1495,7 @@ static int neigh_reduce(struct net_devic
 	} else if (vxlan->flags & VXLAN_F_L3MISS) {
 		union vxlan_addr ipa = {
 			.sin6.sin6_addr = msg->target,
-			.sa.sa_family = AF_INET6,
+			.sin6.sin6_family = AF_INET6,
 		};
 
 		vxlan_ip_miss(dev, &ipa);
@@ -1528,7 +1528,7 @@ static bool route_shortcircuit(struct ne
 		if (!n && (vxlan->flags & VXLAN_F_L3MISS)) {
 			union vxlan_addr ipa = {
 				.sin.sin_addr.s_addr = pip->daddr,
-				.sa.sa_family = AF_INET,
+				.sin.sin_family = AF_INET,
 			};
 
 			vxlan_ip_miss(dev, &ipa);
@@ -1549,7 +1549,7 @@ static bool route_shortcircuit(struct ne
 		if (!n && (vxlan->flags & VXLAN_F_L3MISS)) {
 			union vxlan_addr ipa = {
 				.sin6.sin6_addr = pip6->daddr,
-				.sa.sa_family = AF_INET6,
+				.sin6.sin6_family = AF_INET6,
 			};
 
 			vxlan_ip_miss(dev, &ipa);

[PATCH 3.14 13/37] l2tp: fix race while getting PMTU on PPP pseudo-wire

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guillaume Nault <g.nault@alphalink.fr>

[ Upstream commit eed4d839b0cdf9d84b0a9bc63de90fd5e1e886fb ]

Use dst_entry held by sk_dst_get() to retrieve tunnel's PMTU.

The dst_mtu(__sk_dst_get(tunnel->sock)) call was racy. __sk_dst_get()
could return NULL if tunnel->sock->sk_dst_cache was reset just before the
call, thus making dst_mtu() dereference a NULL pointer:

[ 1937.661598] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 1937.664005] IP: [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp]
[ 1937.664005] PGD daf0c067 PUD d9f93067 PMD 0
[ 1937.664005] Oops: 0000 [#1] SMP
[ 1937.664005] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables udp_tunnel pppoe pppox ppp_generic slhc deflate ctr twofish_generic twofish_x86_64_3way xts lrw gf128mul glue_helper twofish_x86_64 twofish_common blowfish_generic blowfish_x86_64 blowfish_common des_generic cbc xcbc rmd160 sha512_generic hmac crypto_null af_key xfrm_algo 8021q garp bridge stp llc tun atmtcp clip atm ext3 mbcache jbd iTCO_wdt coretemp kvm_intel iTCO_vendor_support kvm pcspkr evdev ehci_pci lpc_ich mfd_core i5400_edac edac_core i5k_amb shpchp button processor thermal_sys xfs crc32c_generic libcrc32c dm_mod usbhid sg hid sr_mod sd_mod cdrom crc_t10dif crct10dif_common ata_generic ahci ata_piix tg3 libahci libata uhci_hcd ptp ehci_hcd pps_core usbcore scsi_mod libphy usb_common [last unloaded: l2tp_core]
[ 1937.664005] CPU: 0 PID: 10022 Comm: l2tpstress Tainted: G           O   3.17.0-rc1 #1
[ 1937.664005] Hardware name: HP ProLiant DL160 G5, BIOS O12 08/22/2008
[ 1937.664005] task: ffff8800d8fda790 ti: ffff8800c43c4000 task.ti: ffff8800c43c4000
[ 1937.664005] RIP: 0010:[<ffffffffa049db88>]  [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp]
[ 1937.664005] RSP: 0018:ffff8800c43c7de8  EFLAGS: 00010282
[ 1937.664005] RAX: ffff8800da8a7240 RBX: ffff8800d8c64600 RCX: 000001c325a137b5
[ 1937.664005] RDX: 8c6318c6318c6320 RSI: 000000000000010c RDI: 0000000000000000
[ 1937.664005] RBP: ffff8800c43c7ea8 R08: 0000000000000000 R09: 0000000000000000
[ 1937.664005] R10: ffffffffa048e2c0 R11: ffff8800d8c64600 R12: ffff8800ca7a5000
[ 1937.664005] R13: ffff8800c439bf40 R14: 000000000000000c R15: 0000000000000009
[ 1937.664005] FS:  00007fd7f610f700(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000
[ 1937.664005] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1937.664005] CR2: 0000000000000020 CR3: 00000000d9d75000 CR4: 00000000000027e0
[ 1937.664005] Stack:
[ 1937.664005]  ffffffffa049da80 ffff8800d8fda790 000000000000005b ffff880000000009
[ 1937.664005]  ffff8800daf3f200 0000000000000003 ffff8800c43c7e48 ffffffff81109b57
[ 1937.664005]  ffffffff81109b0e ffffffff8114c566 0000000000000000 0000000000000000
[ 1937.664005] Call Trace:
[ 1937.664005]  [<ffffffffa049da80>] ? pppol2tp_connect+0x235/0x41e [l2tp_ppp]
[ 1937.664005]  [<ffffffff81109b57>] ? might_fault+0x9e/0xa5
[ 1937.664005]  [<ffffffff81109b0e>] ? might_fault+0x55/0xa5
[ 1937.664005]  [<ffffffff8114c566>] ? rcu_read_unlock+0x1c/0x26
[ 1937.664005]  [<ffffffff81309196>] SYSC_connect+0x87/0xb1
[ 1937.664005]  [<ffffffff813e56f7>] ? sysret_check+0x1b/0x56
[ 1937.664005]  [<ffffffff8107590d>] ? trace_hardirqs_on_caller+0x145/0x1a1
[ 1937.664005]  [<ffffffff81213dee>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 1937.664005]  [<ffffffff8114c262>] ? spin_lock+0x9/0xb
[ 1937.664005]  [<ffffffff813092b4>] SyS_connect+0x9/0xb
[ 1937.664005]  [<ffffffff813e56d2>] system_call_fastpath+0x16/0x1b
[ 1937.664005] Code: 10 2a 84 81 e8 65 76 bd e0 65 ff 0c 25 10 bb 00 00 4d 85 ed 74 37 48 8b 85 60 ff ff ff 48 8b 80 88 01 00 00 48 8b b8 10 02 00 00 <48> 8b 47 20 ff 50 20 85 c0 74 0f 83 e8 28 89 83 10 01 00 00 89
[ 1937.664005] RIP  [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp]
[ 1937.664005]  RSP <ffff8800c43c7de8>
[ 1937.664005] CR2: 0000000000000020
[ 1939.559375] ---[ end trace 82d44500f28f8708 ]---

Fixes: f34c4a35d879 ("l2tp: take PMTU from tunnel UDP socket")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/l2tp/l2tp_ppp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -758,7 +758,8 @@ static int pppol2tp_connect(struct socke
 	/* If PMTU discovery was enabled, use the MTU that was discovered */
 	dst = sk_dst_get(tunnel->sock);
 	if (dst != NULL) {
-		u32 pmtu = dst_mtu(__sk_dst_get(tunnel->sock));
+		u32 pmtu = dst_mtu(dst);
+
 		if (pmtu != 0)
 			session->mtu = session->mru = pmtu -
 				PPPOL2TP_HEADER_OVERHEAD;

[PATCH 3.14 14/37] ipv6: fix rtnl locking in setsockopt for anycast and multicast

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit a9ed4a2986e13011fcf4ed2d1a1647c53112f55b ]

Calling setsockopt with IPV6_JOIN_ANYCAST or IPV6_LEAVE_ANYCAST
triggers the assertion in addrconf_join_solict()/addrconf_leave_solict()

ipv6_sock_ac_join(), ipv6_sock_ac_drop(), ipv6_sock_ac_close() need to
take RTNL before calling ipv6_dev_ac_inc/dec. Same thing with
ipv6_sock_mc_join(), ipv6_sock_mc_drop(), ipv6_sock_mc_close() before
calling ipv6_dev_mc_inc/dec.

This patch moves ASSERT_RTNL() up a level in the call stack.

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/addrconf.c |   15 +++++----------
 net/ipv6/anycast.c  |   12 ++++++++++++
 net/ipv6/mcast.c    |   14 ++++++++++++++
 3 files changed, 31 insertions(+), 10 deletions(-)

--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1684,14 +1684,12 @@ void addrconf_dad_failure(struct inet6_i
 	addrconf_mod_dad_work(ifp, 0);
 }
 
-/* Join to solicited addr multicast group. */
-
+/* Join to solicited addr multicast group.
+ * caller must hold RTNL */
 void addrconf_join_solict(struct net_device *dev, const struct in6_addr *addr)
 {
 	struct in6_addr maddr;
 
-	ASSERT_RTNL();
-
 	if (dev->flags&(IFF_LOOPBACK|IFF_NOARP))
 		return;
 
@@ -1699,12 +1697,11 @@ void addrconf_join_solict(struct net_dev
 	ipv6_dev_mc_inc(dev, &maddr);
 }
 
+/* caller must hold RTNL */
 void addrconf_leave_solict(struct inet6_dev *idev, const struct in6_addr *addr)
 {
 	struct in6_addr maddr;
 
-	ASSERT_RTNL();
-
 	if (idev->dev->flags&(IFF_LOOPBACK|IFF_NOARP))
 		return;
 
@@ -1712,12 +1709,11 @@ void addrconf_leave_solict(struct inet6_
 	__ipv6_dev_mc_dec(idev, &maddr);
 }
 
+/* caller must hold RTNL */
 static void addrconf_join_anycast(struct inet6_ifaddr *ifp)
 {
 	struct in6_addr addr;
 
-	ASSERT_RTNL();
-
 	if (ifp->prefix_len >= 127) /* RFC 6164 */
 		return;
 	ipv6_addr_prefix(&addr, &ifp->addr, ifp->prefix_len);
@@ -1726,12 +1722,11 @@ static void addrconf_join_anycast(struct
 	ipv6_dev_ac_inc(ifp->idev->dev, &addr);
 }
 
+/* caller must hold RTNL */
 static void addrconf_leave_anycast(struct inet6_ifaddr *ifp)
 {
 	struct in6_addr addr;
 
-	ASSERT_RTNL();
-
 	if (ifp->prefix_len >= 127) /* RFC 6164 */
 		return;
 	ipv6_addr_prefix(&addr, &ifp->addr, ifp->prefix_len);
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -77,6 +77,7 @@ int ipv6_sock_ac_join(struct sock *sk, i
 	pac->acl_next = NULL;
 	pac->acl_addr = *addr;
 
+	rtnl_lock();
 	rcu_read_lock();
 	if (ifindex == 0) {
 		struct rt6_info *rt;
@@ -137,6 +138,7 @@ int ipv6_sock_ac_join(struct sock *sk, i
 
 error:
 	rcu_read_unlock();
+	rtnl_unlock();
 	if (pac)
 		sock_kfree_s(sk, pac, sizeof(*pac));
 	return err;
@@ -171,13 +173,17 @@ int ipv6_sock_ac_drop(struct sock *sk, i
 
 	spin_unlock_bh(&ipv6_sk_ac_lock);
 
+	rtnl_lock();
 	rcu_read_lock();
 	dev = dev_get_by_index_rcu(net, pac->acl_ifindex);
 	if (dev)
 		ipv6_dev_ac_dec(dev, &pac->acl_addr);
 	rcu_read_unlock();
+	rtnl_unlock();
 
 	sock_kfree_s(sk, pac, sizeof(*pac));
+	if (!dev)
+		return -ENODEV;
 	return 0;
 }
 
@@ -198,6 +204,7 @@ void ipv6_sock_ac_close(struct sock *sk)
 	spin_unlock_bh(&ipv6_sk_ac_lock);
 
 	prev_index = 0;
+	rtnl_lock();
 	rcu_read_lock();
 	while (pac) {
 		struct ipv6_ac_socklist *next = pac->acl_next;
@@ -212,6 +219,7 @@ void ipv6_sock_ac_close(struct sock *sk)
 		pac = next;
 	}
 	rcu_read_unlock();
+	rtnl_unlock();
 }
 
 static void aca_put(struct ifacaddr6 *ac)
@@ -233,6 +241,8 @@ int ipv6_dev_ac_inc(struct net_device *d
 	struct rt6_info *rt;
 	int err;
 
+	ASSERT_RTNL();
+
 	idev = in6_dev_get(dev);
 
 	if (idev == NULL)
@@ -302,6 +312,8 @@ int __ipv6_dev_ac_dec(struct inet6_dev *
 {
 	struct ifacaddr6 *aca, *prev_aca;
 
+	ASSERT_RTNL();
+
 	write_lock_bh(&idev->lock);
 	prev_aca = NULL;
 	for (aca = idev->ac_list; aca; aca = aca->aca_next) {
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -172,6 +172,7 @@ int ipv6_sock_mc_join(struct sock *sk, i
 	mc_lst->next = NULL;
 	mc_lst->addr = *addr;
 
+	rtnl_lock();
 	rcu_read_lock();
 	if (ifindex == 0) {
 		struct rt6_info *rt;
@@ -185,6 +186,7 @@ int ipv6_sock_mc_join(struct sock *sk, i
 
 	if (dev == NULL) {
 		rcu_read_unlock();
+		rtnl_unlock();
 		sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
 		return -ENODEV;
 	}
@@ -202,6 +204,7 @@ int ipv6_sock_mc_join(struct sock *sk, i
 
 	if (err) {
 		rcu_read_unlock();
+		rtnl_unlock();
 		sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
 		return err;
 	}
@@ -212,6 +215,7 @@ int ipv6_sock_mc_join(struct sock *sk, i
 	spin_unlock(&ipv6_sk_mc_lock);
 
 	rcu_read_unlock();
+	rtnl_unlock();
 
 	return 0;
 }
@@ -229,6 +233,7 @@ int ipv6_sock_mc_drop(struct sock *sk, i
 	if (!ipv6_addr_is_multicast(addr))
 		return -EINVAL;
 
+	rtnl_lock();
 	spin_lock(&ipv6_sk_mc_lock);
 	for (lnk = &np->ipv6_mc_list;
 	     (mc_lst = rcu_dereference_protected(*lnk,
@@ -252,12 +257,15 @@ int ipv6_sock_mc_drop(struct sock *sk, i
 			} else
 				(void) ip6_mc_leave_src(sk, mc_lst, NULL);
 			rcu_read_unlock();
+			rtnl_unlock();
+
 			atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
 			kfree_rcu(mc_lst, rcu);
 			return 0;
 		}
 	}
 	spin_unlock(&ipv6_sk_mc_lock);
+	rtnl_unlock();
 
 	return -EADDRNOTAVAIL;
 }
@@ -302,6 +310,7 @@ void ipv6_sock_mc_close(struct sock *sk)
 	if (!rcu_access_pointer(np->ipv6_mc_list))
 		return;
 
+	rtnl_lock();
 	spin_lock(&ipv6_sk_mc_lock);
 	while ((mc_lst = rcu_dereference_protected(np->ipv6_mc_list,
 				lockdep_is_held(&ipv6_sk_mc_lock))) != NULL) {
@@ -328,6 +337,7 @@ void ipv6_sock_mc_close(struct sock *sk)
 		spin_lock(&ipv6_sk_mc_lock);
 	}
 	spin_unlock(&ipv6_sk_mc_lock);
+	rtnl_unlock();
 }
 
 int ip6_mc_source(int add, int omode, struct sock *sk,
@@ -845,6 +855,8 @@ int ipv6_dev_mc_inc(struct net_device *d
 	struct ifmcaddr6 *mc;
 	struct inet6_dev *idev;
 
+	ASSERT_RTNL();
+
 	/* we need to take a reference on idev */
 	idev = in6_dev_get(dev);
 
@@ -916,6 +928,8 @@ int __ipv6_dev_mc_dec(struct inet6_dev *
 {
 	struct ifmcaddr6 *ma, **map;
 
+	ASSERT_RTNL();
+
 	write_lock_bh(&idev->lock);
 	for (map = &idev->mc_list; (ma=*map) != NULL; map = &ma->next) {
 		if (ipv6_addr_equal(&ma->mca_addr, addr)) {

[PATCH 3.14 15/37] bonding: fix div by zero while enslaving and transmitting

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@redhat.com>

[ Upstream commit 9a72c2da690d78e93cff24b9f616412508678dd5 ]

The problem is that the slave is first linked and slave_cnt is
incremented afterwards leading to a div by zero in the modes that use it
as a modulus. What happens is that in bond_start_xmit()
bond_has_slaves() is used to evaluate further transmission and it becomes
true after the slave is linked in, but when slave_cnt is used in the xmit
path it is still 0, so fetch it once and transmit based on that. Since
it is used only in round-robin and XOR modes, the fix is only for them.
Thanks to Eric Dumazet for pointing out the fault in my first try to fix
this.

Call trace (took it out of net-next kernel, but it's the same with net):
[46934.330038] divide error: 0000 [#1] SMP
[46934.330041] Modules linked in: bonding(O) 9p fscache
snd_hda_codec_generic crct10dif_pclmul
[46934.330041] bond0: Enslaving eth1 as an active interface with an up
link
[46934.330051]  ppdev joydev crc32_pclmul crc32c_intel 9pnet_virtio
ghash_clmulni_intel snd_hda_intel 9pnet snd_hda_controller parport_pc
serio_raw pcspkr snd_hda_codec parport virtio_balloon virtio_console
snd_hwdep snd_pcm pvpanic i2c_piix4 snd_timer i2ccore snd soundcore
virtio_blk virtio_net virtio_pci virtio_ring virtio ata_generic
pata_acpi floppy [last unloaded: bonding]
[46934.330053] CPU: 1 PID: 3382 Comm: ping Tainted: G           O
3.17.0-rc4+ #27
[46934.330053] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[46934.330054] task: ffff88005aebf2c0 ti: ffff88005b728000 task.ti:
ffff88005b728000
[46934.330059] RIP: 0010:[<ffffffffa0198c33>]  [<ffffffffa0198c33>]
bond_start_xmit+0x1c3/0x450 [bonding]
[46934.330060] RSP: 0018:ffff88005b72b7f8  EFLAGS: 00010246
[46934.330060] RAX: 0000000000000679 RBX: ffff88004b077000 RCX:
000000000000002a
[46934.330061] RDX: 0000000000000000 RSI: ffff88004b3f0500 RDI:
ffff88004b077940
[46934.330061] RBP: ffff88005b72b830 R08: 00000000000000c0 R09:
ffff88004a83e000
[46934.330062] R10: 000000000000ffff R11: ffff88004b1f12c0 R12:
ffff88004b3f0500
[46934.330062] R13: ffff88004b3f0500 R14: 000000000000002a R15:
ffff88004b077940
[46934.330063] FS:  00007fbd91a4c740(0000) GS:ffff88005f080000(0000)
knlGS:0000000000000000
[46934.330064] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[46934.330064] CR2: 00007f803a8bb000 CR3: 000000004b2c9000 CR4:
00000000000406e0
[46934.330069] Stack:
[46934.330071]  ffffffff811e6169 00000000e772fa05 ffff88004b077000
ffff88004b3f0500
[46934.330072]  ffffffff81d17d18 000000000000002a 0000000000000000
ffff88005b72b8a0
[46934.330073]  ffffffff81620108 ffffffff8161fe0e ffff88005b72b8c4
ffff88005b302000
[46934.330073] Call Trace:
[46934.330077]  [<ffffffff811e6169>] ?
__kmalloc_node_track_caller+0x119/0x300
[46934.330084]  [<ffffffff81620108>] dev_hard_start_xmit+0x188/0x410
[46934.330086]  [<ffffffff8161fe0e>] ? harmonize_features+0x2e/0x90
[46934.330088]  [<ffffffff81620b06>] __dev_queue_xmit+0x456/0x590
[46934.330089]  [<ffffffff81620c50>] dev_queue_xmit+0x10/0x20
[46934.330090]  [<ffffffff8168f022>] arp_xmit+0x22/0x60
[46934.330091]  [<ffffffff8168f090>] arp_send.part.16+0x30/0x40
[46934.330092]  [<ffffffff8168f1e5>] arp_solicit+0x115/0x2b0
[46934.330094]  [<ffffffff8160b5d7>] ? copy_skb_header+0x17/0xa0
[46934.330096]  [<ffffffff8162875a>] neigh_probe+0x4a/0x70
[46934.330097]  [<ffffffff8162979c>] __neigh_event_send+0xac/0x230
[46934.330098]  [<ffffffff8162a00b>] neigh_resolve_output+0x13b/0x220
[46934.330100]  [<ffffffff8165f120>] ? ip_forward_options+0x1c0/0x1c0
[46934.330101]  [<ffffffff81660478>] ip_finish_output+0x1f8/0x860
[46934.330102]  [<ffffffff81661f08>] ip_output+0x58/0x90
[46934.330103]  [<ffffffff81661602>] ? __ip_local_out+0xa2/0xb0
[46934.330104]  [<ffffffff81661640>] ip_local_out_sk+0x30/0x40
[46934.330105]  [<ffffffff81662a66>] ip_send_skb+0x16/0x50
[46934.330106]  [<ffffffff81662ad3>] ip_push_pending_frames+0x33/0x40
[46934.330107]  [<ffffffff8168854c>] raw_sendmsg+0x88c/0xa30
[46934.330110]  [<ffffffff81612b31>] ? skb_recv_datagram+0x41/0x60
[46934.330111]  [<ffffffff816875a9>] ? raw_recvmsg+0xa9/0x1f0
[46934.330113]  [<ffffffff816978d4>] inet_sendmsg+0x74/0xc0
[46934.330114]  [<ffffffff81697a9b>] ? inet_recvmsg+0x8b/0xb0
[46934.330115] bond0: Adding slave eth2
[46934.330116]  [<ffffffff8160357c>] sock_sendmsg+0x9c/0xe0
[46934.330118]  [<ffffffff81603248>] ?
move_addr_to_kernel.part.20+0x28/0x80
[46934.330121]  [<ffffffff811b4477>] ? might_fault+0x47/0x50
[46934.330122]  [<ffffffff816039b9>] ___sys_sendmsg+0x3a9/0x3c0
[46934.330125]  [<ffffffff8144a14a>] ? n_tty_write+0x3aa/0x530
[46934.330127]  [<ffffffff810d1ae4>] ? __wake_up+0x44/0x50
[46934.330129]  [<ffffffff81242b38>] ? fsnotify+0x238/0x310
[46934.330130]  [<ffffffff816048a1>] __sys_sendmsg+0x51/0x90
[46934.330131]  [<ffffffff816048f2>] SyS_sendmsg+0x12/0x20
[46934.330134]  [<ffffffff81738b29>] system_call_fastpath+0x16/0x1b
[46934.330144] Code: 48 8b 10 4c 89 ee 4c 89 ff e8 aa bc ff ff 31 c0 e9
1a ff ff ff 0f 1f 00 4c 89 ee 4c 89 ff e8 65 fb ff ff 31 d2 4c 89 ee 4c
89 ff <f7> b3 64 09 00 00 e8 02 bd ff ff 31 c0 e9 f2 fe ff ff 0f 1f 00
[46934.330146] RIP  [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450
[bonding]
[46934.330146]  RSP <ffff88005b72b7f8>

CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
Fixes: 278b208375 ("bonding: initial RCU conversion")
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_main.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3624,8 +3624,14 @@ static int bond_xmit_roundrobin(struct s
 		else
 			bond_xmit_slave_id(bond, skb, 0);
 	} else {
-		slave_id = bond_rr_gen_slave_id(bond);
-		bond_xmit_slave_id(bond, skb, slave_id % bond->slave_cnt);
+		int slave_cnt = ACCESS_ONCE(bond->slave_cnt);
+
+		if (likely(slave_cnt)) {
+			slave_id = bond_rr_gen_slave_id(bond);
+			bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
+		} else {
+			dev_kfree_skb_any(skb);
+		}
 	}
 
 	return NETDEV_TX_OK;
@@ -3656,8 +3662,13 @@ static int bond_xmit_activebackup(struct
 static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
+	int slave_cnt = ACCESS_ONCE(bond->slave_cnt);
 
-	bond_xmit_slave_id(bond, skb, bond_xmit_hash(bond, skb, bond->slave_cnt));
+	if (likely(slave_cnt))
+		bond_xmit_slave_id(bond, skb,
+				   bond_xmit_hash(bond, skb, bond->slave_cnt));
+	else
+		dev_kfree_skb_any(skb);
 
 	return NETDEV_TX_OK;
 }

[PATCH 3.14 16/37] ipv6: restore the behavior of ipv6_sock_ac_drop()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: WANG Cong <xiyou.wangcong@gmail.com>

[ Upstream commit de185ab46cb02df9738b0d898b0c3a89181c5526 ]

It is possible that the interface is already gone after joining
the list of anycast on this interface as we don't hold a refcount
for the device, in this case we are safe to ignore the error.

What's more important, for API compatibility we should not
change this behavior for applications even if it were correct.

Fixes: commit a9ed4a2986e13011 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast")
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/anycast.c |    2 --
 1 file changed, 2 deletions(-)

--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -182,8 +182,6 @@ int ipv6_sock_ac_drop(struct sock *sk, i
 	rtnl_unlock();
 
 	sock_kfree_s(sk, pac, sizeof(*pac));
-	if (!dev)
-		return -ENODEV;
 	return 0;
 }
 

[PATCH 3.14 17/37] bridge: Check if vlan filtering is enabled only once.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit 20adfa1a81af00bf2027644507ad4fa9cd2849cf ]

The bridge code checks if vlan filtering is enabled on both
ingress and egress.   When the state flip happens, it
is possible for the bridge to currently be forwarding packets
and forwarding behavior becomes non-deterministic.  Bridge
may drop packets on some interfaces, but not others.

This patch solves this by caching the filtered state of the
packet into skb_cb on ingress.  The skb_cb is guaranteed to
not be over-written between the time packet entres bridge
forwarding path and the time it leaves it.  On egress, we
can then check the cached state to see if we need to
apply filtering information.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_private.h |    3 +++
 net/bridge/br_vlan.c    |   15 +++++++++++----
 2 files changed, 14 insertions(+), 4 deletions(-)

--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -302,6 +302,9 @@ struct br_input_skb_cb {
 	int igmp;
 	int mrouters_only;
 #endif
+#ifdef CONFIG_BRIDGE_VLAN_FILTERING
+	bool vlan_filtered;
+#endif
 };
 
 #define BR_INPUT_SKB_CB(__skb)	((struct br_input_skb_cb *)(__skb)->cb)
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -125,7 +125,8 @@ struct sk_buff *br_handle_vlan(struct ne
 {
 	u16 vid;
 
-	if (!br->vlan_enabled)
+	/* If this packet was not filtered at input, let it pass */
+	if (!BR_INPUT_SKB_CB(skb)->vlan_filtered)
 		goto out;
 
 	/* Vlan filter table must be configured at this point.  The
@@ -163,8 +164,10 @@ bool br_allowed_ingress(struct net_bridg
 	/* If VLAN filtering is disabled on the bridge, all packets are
 	 * permitted.
 	 */
-	if (!br->vlan_enabled)
+	if (!br->vlan_enabled) {
+		BR_INPUT_SKB_CB(skb)->vlan_filtered = false;
 		return true;
+	}
 
 	/* If there are no vlan in the permitted list, all packets are
 	 * rejected.
@@ -172,6 +175,8 @@ bool br_allowed_ingress(struct net_bridg
 	if (!v)
 		goto drop;
 
+	BR_INPUT_SKB_CB(skb)->vlan_filtered = true;
+
 	/* If vlan tx offload is disabled on bridge device and frame was
 	 * sent from vlan device on the bridge device, it does not have
 	 * HW accelerated vlan tag.
@@ -228,7 +233,8 @@ bool br_allowed_egress(struct net_bridge
 {
 	u16 vid;
 
-	if (!br->vlan_enabled)
+	/* If this packet was not filtered at input, let it pass */
+	if (!BR_INPUT_SKB_CB(skb)->vlan_filtered)
 		return true;
 
 	if (!v)
@@ -247,7 +253,8 @@ bool br_should_learn(struct net_bridge_p
 	struct net_bridge *br = p->br;
 	struct net_port_vlans *v;
 
-	if (!br->vlan_enabled)
+	/* If filtering was disabled at input, let it pass. */
+	if (!BR_INPUT_SKB_CB(skb)->vlan_filtered)
 		return true;
 
 	v = rcu_dereference(p->vlan_info);

[PATCH 3.14 18/37] bridge: Fix br_should_learn to check vlan_enabled

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit c095f248e63ada504dd90c90baae673ae10ee3fe ]

As Toshiaki Makita pointed out, the BRIDGE_INPUT_SKB_CB will
not be initialized in br_should_learn() as that function
is called only from br_handle_local_finish().  That is
an input handler for link-local ethernet traffic so it perfectly
correct to check br->vlan_enabled here.

Reported-by: Toshiaki Makita<toshiaki.makita1@gmail.com>
Fixes: 20adfa1 bridge: Check if vlan filtering is enabled only once.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_vlan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -254,7 +254,7 @@ bool br_should_learn(struct net_bridge_p
 	struct net_port_vlans *v;
 
 	/* If filtering was disabled at input, let it pass. */
-	if (!BR_INPUT_SKB_CB(skb)->vlan_filtered)
+	if (!br->vlan_enabled)
 		return true;
 
 	v = rcu_dereference(p->vlan_info);

[PATCH 3.14 19/37] net: allow macvlans to move to net namespace

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Francesco Ruggeri <fruggeri@arista.com>

[ Upstream commit 0d0162e7a33d3710b9604e7c68c0f31f5c457428 ]

I cannot move a macvlan interface created on top of a bonding interface
to a different namespace:

% ip netns add dummy0
% ip link add link bond0 mac0 type macvlan
% ip link set mac0 netns dummy0
RTNETLINK answers: Invalid argument
%

The problem seems to be that commit f9399814927a ("bonding: Don't allow
bond devices to change network namespaces.") sets NETIF_F_NETNS_LOCAL
on bonding interfaces, and commit 797f87f83b60 ("macvlan: fix netdev
feature propagation from lower device") causes macvlan interfaces
to inherit its features from the lower device.

NETIF_F_NETNS_LOCAL should not be inherited from the lower device
by a macvlan.
Patch tested on 3.16.

Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macvlan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -709,6 +709,7 @@ static netdev_features_t macvlan_fix_fea
 					     features,
 					     mask);
 	features |= ALWAYS_ON_FEATURES;
+	features &= ~NETIF_F_NETNS_LOCAL;
 
 	return features;
 }

[PATCH 3.14 20/37] tg3: Work around HW/FW limitations with vlan encapsulated frames

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit 476c18850c6cbaa3f2bb661ae9710645081563b9 ]

TG3 appears to have an issue performing TSO and checksum offloading
correclty when the frame has been vlan encapsulated (non-accelrated).
In these cases, tcp checksum is not correctly updated.

This patch attempts to work around this issue.  After the patch,
802.1ad vlans start working correctly over tg3 devices.

CC: Prashant Sreedharan <prashant@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/tg3.c |   20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -7915,8 +7915,6 @@ static netdev_tx_t tg3_start_xmit(struct
 
 	entry = tnapi->tx_prod;
 	base_flags = 0;
-	if (skb->ip_summed == CHECKSUM_PARTIAL)
-		base_flags |= TXD_FLAG_TCPUDP_CSUM;
 
 	mss = skb_shinfo(skb)->gso_size;
 	if (mss) {
@@ -7932,6 +7930,13 @@ static netdev_tx_t tg3_start_xmit(struct
 
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb) - ETH_HLEN;
 
+		/* HW/FW can not correctly segment packets that have been
+		 * vlan encapsulated.
+		 */
+		if (skb->protocol == htons(ETH_P_8021Q) ||
+		    skb->protocol == htons(ETH_P_8021AD))
+			return tg3_tso_bug(tp, skb);
+
 		if (!skb_is_gso_v6(skb)) {
 			iph->check = 0;
 			iph->tot_len = htons(mss + hdr_len);
@@ -7978,6 +7983,17 @@ static netdev_tx_t tg3_start_xmit(struct
 				base_flags |= tsflags << 12;
 			}
 		}
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		/* HW/FW can not correctly checksum packets that have been
+		 * vlan encapsulated.
+		 */
+		if (skb->protocol == htons(ETH_P_8021Q) ||
+		    skb->protocol == htons(ETH_P_8021AD)) {
+			if (skb_checksum_help(skb))
+				goto drop;
+		} else  {
+			base_flags |= TXD_FLAG_TCPUDP_CSUM;
+		}
 	}
 
 	if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&

[PATCH 3.14 21/37] tg3: Allow for recieve of full-size 8021AD frames

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit 7d3083ee36b51e425b6abd76778a2046906b0fd3 ]

When receiving a vlan-tagged frame that still contains
a vlan header, the length of the packet will be greater
then MTU+ETH_HLEN since it will account of the extra
vlan header.  TG3 checks this for the case for 802.1Q,
but not for 802.1ad.  As a result, full sized 802.1ad
frames get dropped by the card.

Add a check for 802.1ad protocol when receving full
sized frames.

Suggested-by: Prashant Sreedharan <prashant@broadcom.com>
CC: Prashant Sreedharan <prashant@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/tg3.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6923,7 +6923,8 @@ static int tg3_rx(struct tg3_napi *tnapi
 		skb->protocol = eth_type_trans(skb, tp->dev);
 
 		if (len > (tp->dev->mtu + ETH_HLEN) &&
-		    skb->protocol != htons(ETH_P_8021Q)) {
+		    skb->protocol != htons(ETH_P_8021Q) &&
+		    skb->protocol != htons(ETH_P_8021AD)) {
 			dev_kfree_skb(skb);
 			goto drop_it_no_recycle;
 		}

[PATCH 3.14 22/37] xfrm: Generate blackhole routes only from route lookup functions

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit f92ee61982d6da15a9e49664ecd6405a15a2ee56 ]

Currently we genarate a blackhole route route whenever we have
matching policies but can not resolve the states. Here we assume
that dst_output() is called to kill the balckholed packets.
Unfortunately this assumption is not true in all cases, so
it is possible that these packets leave the system unwanted.

We fix this by generating blackhole routes only from the
route lookup functions, here we can guarantee a call to
dst_output() afterwards.

Fixes: 2774c131b1d ("xfrm: Handle blackhole route creation via afinfo.")
Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/dst.h      |   15 ++++++++++++++-
 net/ipv4/route.c       |    6 +++---
 net/ipv6/ip6_output.c  |    4 ++--
 net/xfrm/xfrm_policy.c |   18 +++++++++++++++++-
 4 files changed, 36 insertions(+), 7 deletions(-)

--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -476,7 +476,16 @@ static inline struct dst_entry *xfrm_loo
 					    int flags)
 {
 	return dst_orig;
-} 
+}
+
+static inline struct dst_entry *xfrm_lookup_route(struct net *net,
+						  struct dst_entry *dst_orig,
+						  const struct flowi *fl,
+						  struct sock *sk,
+						  int flags)
+{
+	return dst_orig;
+}
 
 static inline struct xfrm_state *dst_xfrm(const struct dst_entry *dst)
 {
@@ -488,6 +497,10 @@ struct dst_entry *xfrm_lookup(struct net
 			      const struct flowi *fl, struct sock *sk,
 			      int flags);
 
+struct dst_entry *xfrm_lookup_route(struct net *net, struct dst_entry *dst_orig,
+				    const struct flowi *fl, struct sock *sk,
+				    int flags);
+
 /* skb attached with this dst needs transformation if dst->xfrm is valid */
 static inline struct xfrm_state *dst_xfrm(const struct dst_entry *dst)
 {
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2268,9 +2268,9 @@ struct rtable *ip_route_output_flow(stru
 		return rt;
 
 	if (flp4->flowi4_proto)
-		rt = (struct rtable *) xfrm_lookup(net, &rt->dst,
-						   flowi4_to_flowi(flp4),
-						   sk, 0);
+		rt = (struct rtable *)xfrm_lookup_route(net, &rt->dst,
+							flowi4_to_flowi(flp4),
+							sk, 0);
 
 	return rt;
 }
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1008,7 +1008,7 @@ struct dst_entry *ip6_dst_lookup_flow(st
 	if (final_dst)
 		fl6->daddr = *final_dst;
 
-	return xfrm_lookup(sock_net(sk), dst, flowi6_to_flowi(fl6), sk, 0);
+	return xfrm_lookup_route(sock_net(sk), dst, flowi6_to_flowi(fl6), sk, 0);
 }
 EXPORT_SYMBOL_GPL(ip6_dst_lookup_flow);
 
@@ -1040,7 +1040,7 @@ struct dst_entry *ip6_sk_dst_lookup_flow
 	if (final_dst)
 		fl6->daddr = *final_dst;
 
-	return xfrm_lookup(sock_net(sk), dst, flowi6_to_flowi(fl6), sk, 0);
+	return xfrm_lookup_route(sock_net(sk), dst, flowi6_to_flowi(fl6), sk, 0);
 }
 EXPORT_SYMBOL_GPL(ip6_sk_dst_lookup_flow);
 
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2155,7 +2155,7 @@ struct dst_entry *xfrm_lookup(struct net
 			xfrm_pols_put(pols, drop_pols);
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTNOSTATES);
 
-			return make_blackhole(net, family, dst_orig);
+			return ERR_PTR(-EREMOTE);
 		}
 
 		err = -EAGAIN;
@@ -2212,6 +2212,22 @@ dropdst:
 }
 EXPORT_SYMBOL(xfrm_lookup);
 
+/* Callers of xfrm_lookup_route() must ensure a call to dst_output().
+ * Otherwise we may send out blackholed packets.
+ */
+struct dst_entry *xfrm_lookup_route(struct net *net, struct dst_entry *dst_orig,
+				    const struct flowi *fl,
+				    struct sock *sk, int flags)
+{
+	struct dst_entry *dst = xfrm_lookup(net, dst_orig, fl, sk, flags);
+
+	if (IS_ERR(dst) && PTR_ERR(dst) == -EREMOTE)
+		return make_blackhole(net, dst_orig->ops->family, dst_orig);
+
+	return dst;
+}
+EXPORT_SYMBOL(xfrm_lookup_route);
+
 static inline int
 xfrm_secpath_reject(int idx, struct sk_buff *skb, const struct flowi *fl)
 {

[PATCH 3.14 23/37] xfrm: Generate queueing routes only from route lookup functions

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit b8c203b2d2fc961bafd53b41d5396bbcdec55998 ]

Currently we genarate a queueing route if we have matching policies
but can not resolve the states and the sysctl xfrm_larval_drop is
disabled. Here we assume that dst_output() is called to kill the
queued packets. Unfortunately this assumption is not true in all
cases, so it is possible that these packets leave the system unwanted.

We fix this by generating queueing routes only from the
route lookup functions, here we can guarantee a call to
dst_output() afterwards.

Fixes: a0073fe18e71 ("xfrm: Add a state resolution packet queue")
Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/dst.h      |    1 +
 net/xfrm/xfrm_policy.c |   32 ++++++++++++++++++++++++--------
 2 files changed, 25 insertions(+), 8 deletions(-)

--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -466,6 +466,7 @@ void dst_init(void);
 /* Flags for xfrm_lookup flags argument. */
 enum {
 	XFRM_LOOKUP_ICMP = 1 << 0,
+	XFRM_LOOKUP_QUEUE = 1 << 1,
 };
 
 struct flowi;
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -41,6 +41,11 @@
 
 static struct dst_entry *xfrm_policy_sk_bundles;
 
+struct xfrm_flo {
+	struct dst_entry *dst_orig;
+	u8 flags;
+};
+
 static DEFINE_SPINLOCK(xfrm_policy_afinfo_lock);
 static struct xfrm_policy_afinfo __rcu *xfrm_policy_afinfo[NPROTO]
 						__read_mostly;
@@ -1889,13 +1894,14 @@ static int xdst_queue_output(struct sk_b
 }
 
 static struct xfrm_dst *xfrm_create_dummy_bundle(struct net *net,
-						 struct dst_entry *dst,
+						 struct xfrm_flo *xflo,
 						 const struct flowi *fl,
 						 int num_xfrms,
 						 u16 family)
 {
 	int err;
 	struct net_device *dev;
+	struct dst_entry *dst;
 	struct dst_entry *dst1;
 	struct xfrm_dst *xdst;
 
@@ -1903,9 +1909,12 @@ static struct xfrm_dst *xfrm_create_dumm
 	if (IS_ERR(xdst))
 		return xdst;
 
-	if (net->xfrm.sysctl_larval_drop || num_xfrms <= 0)
+	if (!(xflo->flags & XFRM_LOOKUP_QUEUE) ||
+	    net->xfrm.sysctl_larval_drop ||
+	    num_xfrms <= 0)
 		return xdst;
 
+	dst = xflo->dst_orig;
 	dst1 = &xdst->u.dst;
 	dst_hold(dst);
 	xdst->route = dst;
@@ -1947,7 +1956,7 @@ static struct flow_cache_object *
 xfrm_bundle_lookup(struct net *net, const struct flowi *fl, u16 family, u8 dir,
 		   struct flow_cache_object *oldflo, void *ctx)
 {
-	struct dst_entry *dst_orig = (struct dst_entry *)ctx;
+	struct xfrm_flo *xflo = (struct xfrm_flo *)ctx;
 	struct xfrm_policy *pols[XFRM_POLICY_TYPE_MAX];
 	struct xfrm_dst *xdst, *new_xdst;
 	int num_pols = 0, num_xfrms = 0, i, err, pol_dead;
@@ -1988,7 +1997,8 @@ xfrm_bundle_lookup(struct net *net, cons
 			goto make_dummy_bundle;
 	}
 
-	new_xdst = xfrm_resolve_and_create_bundle(pols, num_pols, fl, family, dst_orig);
+	new_xdst = xfrm_resolve_and_create_bundle(pols, num_pols, fl, family,
+						  xflo->dst_orig);
 	if (IS_ERR(new_xdst)) {
 		err = PTR_ERR(new_xdst);
 		if (err != -EAGAIN)
@@ -2022,7 +2032,7 @@ make_dummy_bundle:
 	/* We found policies, but there's no bundles to instantiate:
 	 * either because the policy blocks, has no transformations or
 	 * we could not build template (no xfrm_states).*/
-	xdst = xfrm_create_dummy_bundle(net, dst_orig, fl, num_xfrms, family);
+	xdst = xfrm_create_dummy_bundle(net, xflo, fl, num_xfrms, family);
 	if (IS_ERR(xdst)) {
 		xfrm_pols_put(pols, num_pols);
 		return ERR_CAST(xdst);
@@ -2121,13 +2131,18 @@ struct dst_entry *xfrm_lookup(struct net
 	}
 
 	if (xdst == NULL) {
+		struct xfrm_flo xflo;
+
+		xflo.dst_orig = dst_orig;
+		xflo.flags = flags;
+
 		/* To accelerate a bit...  */
 		if ((dst_orig->flags & DST_NOXFRM) ||
 		    !net->xfrm.policy_count[XFRM_POLICY_OUT])
 			goto nopol;
 
 		flo = flow_cache_lookup(net, fl, family, dir,
-					xfrm_bundle_lookup, dst_orig);
+					xfrm_bundle_lookup, &xflo);
 		if (flo == NULL)
 			goto nopol;
 		if (IS_ERR(flo)) {
@@ -2219,7 +2234,8 @@ struct dst_entry *xfrm_lookup_route(stru
 				    const struct flowi *fl,
 				    struct sock *sk, int flags)
 {
-	struct dst_entry *dst = xfrm_lookup(net, dst_orig, fl, sk, flags);
+	struct dst_entry *dst = xfrm_lookup(net, dst_orig, fl, sk,
+					    flags | XFRM_LOOKUP_QUEUE);
 
 	if (IS_ERR(dst) && PTR_ERR(dst) == -EREMOTE)
 		return make_blackhole(net, dst_orig->ops->family, dst_orig);
@@ -2493,7 +2509,7 @@ int __xfrm_route_forward(struct sk_buff
 
 	skb_dst_force(skb);
 
-	dst = xfrm_lookup(net, skb_dst(skb), &fl, NULL, 0);
+	dst = xfrm_lookup(net, skb_dst(skb), &fl, NULL, XFRM_LOOKUP_QUEUE);
 	if (IS_ERR(dst)) {
 		res = 0;
 		dst = NULL;

[PATCH 3.14 24/37] macvtap: Fix race between device delete and open.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit 40b8fe45d1f094e3babe7b2dc2b71557ab71401d ]

In macvtap device delete and open calls can race and
this causes a list curruption of the vlan queue_list.

The race intself is triggered by the idr accessors
that located the vlan device.  The device is stored
into and removed from the idr under both an rtnl and
a mutex.  However, when attempting to locate the device
in idr, only a mutex is taken.  As a result, once cpu
perfoming a delete may take an rtnl and wait for the mutex,
while another cput doing an open() will take the idr
mutex first to fetch the device pointer and later take
an rtnl to add a queue for the device which may have
just gotten deleted.

With this patch, we now hold the rtnl for the duration
of the macvtap_open() call thus making sure that
open will not race with delete.

CC: Michael S. Tsirkin <mst@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/macvtap.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -112,17 +112,15 @@ out:
 	return err;
 }
 
+/* Requires RTNL */
 static int macvtap_set_queue(struct net_device *dev, struct file *file,
 			     struct macvtap_queue *q)
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
-	int err = -EBUSY;
 
-	rtnl_lock();
 	if (vlan->numqueues == MAX_MACVTAP_QUEUES)
-		goto out;
+		return -EBUSY;
 
-	err = 0;
 	rcu_assign_pointer(q->vlan, vlan);
 	rcu_assign_pointer(vlan->taps[vlan->numvtaps], q);
 	sock_hold(&q->sk);
@@ -136,9 +134,7 @@ static int macvtap_set_queue(struct net_
 	vlan->numvtaps++;
 	vlan->numqueues++;
 
-out:
-	rtnl_unlock();
-	return err;
+	return 0;
 }
 
 static int macvtap_disable_queue(struct macvtap_queue *q)
@@ -454,11 +450,12 @@ static void macvtap_sock_destruct(struct
 static int macvtap_open(struct inode *inode, struct file *file)
 {
 	struct net *net = current->nsproxy->net_ns;
-	struct net_device *dev = dev_get_by_macvtap_minor(iminor(inode));
+	struct net_device *dev;
 	struct macvtap_queue *q;
-	int err;
+	int err = -ENODEV;
 
-	err = -ENODEV;
+	rtnl_lock();
+	dev = dev_get_by_macvtap_minor(iminor(inode));
 	if (!dev)
 		goto out;
 
@@ -498,6 +495,7 @@ out:
 	if (dev)
 		dev_put(dev);
 
+	rtnl_unlock();
 	return err;
 }
 

[PATCH 3.14 25/37] Revert "net/macb: add pinctrl consumer support"

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Soren Brinkmann <soren.brinkmann@xilinx.com>

[ Upstream commit 9026968abe7ad102f4ac5c6d96d733643f75399c ]

This reverts commit 8ef29f8aae524bd51298fb10ac6a5ce6c4c5a3d8.
The driver core already calls pinctrl_get() and claims the default
state. There is no need to replicate this in the driver.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/cadence/macb.c |   11 -----------
 1 file changed, 11 deletions(-)

--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -30,7 +30,6 @@
 #include <linux/of_device.h>
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "macb.h"
 
@@ -1810,7 +1809,6 @@ static int __init macb_probe(struct plat
 	struct phy_device *phydev;
 	u32 config;
 	int err = -ENXIO;
-	struct pinctrl *pinctrl;
 	const char *mac;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1819,15 +1817,6 @@ static int __init macb_probe(struct plat
 		goto err_out;
 	}
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		err = PTR_ERR(pinctrl);
-		if (err == -EPROBE_DEFER)
-			goto err_out;
-
-		dev_warn(&pdev->dev, "No pinctrl provided\n");
-	}
-
 	err = -ENOMEM;
 	dev = alloc_etherdev(sizeof(*bp));
 	if (!dev)

[PATCH 3.14 26/37] gro: fix aggregation for skb using frag_list

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 73d3fe6d1c6d840763ceafa9afae0aaafa18c4b5 ]

In commit 8a29111c7ca6 ("net: gro: allow to build full sized skb")
I added a regression for linear skb that traditionally force GRO
to use the frag_list fallback.

Erez Shitrit found that at most two segments were aggregated and
the "if (skb_gro_len(p) != pinfo->gso_size)" test was failing.

This is because pinfo at this spot still points to the last skb in the
chain, instead of the first one, where we find the correct gso_size
information.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 8a29111c7ca6 ("net: gro: allow to build full sized skb")
Reported-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/skbuff.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3140,6 +3140,9 @@ int skb_gro_receive(struct sk_buff **hea
 		NAPI_GRO_CB(skb)->free = NAPI_GRO_FREE_STOLEN_HEAD;
 		goto done;
 	}
+	/* switch back to head shinfo */
+	pinfo = skb_shinfo(p);
+
 	if (pinfo->frag_list)
 		goto merge;
 	if (skb_gro_len(p) != pinfo->gso_size)

[PATCH 3.14 27/37] hyperv: Fix a bug in netvsc_start_xmit()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: KY Srinivasan <kys@microsoft.com>

[ Upstream commit dedb845ded56ded1c62f5398a94ffa8615d4592d ]

After the packet is successfully sent, we should not touch the skb
as it may have been freed. This patch is based on the work done by
Long Li <longli@microsoft.com>.

In this version of the patch I have fixed issues pointed out by David.
David, please queue this up for stable.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Long Li <longli@microsoft.com>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc_drv.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -146,6 +146,7 @@ static int netvsc_start_xmit(struct sk_b
 	struct hv_netvsc_packet *packet;
 	int ret;
 	unsigned int i, num_pages, npg_data;
+	u32 skb_length = skb->len;
 
 	/* Add multipages for skb->data and additional 2 for RNDIS */
 	npg_data = (((unsigned long)skb->data + skb_headlen(skb) - 1)
@@ -216,7 +217,7 @@ static int netvsc_start_xmit(struct sk_b
 	ret = rndis_filter_send(net_device_ctx->device_ctx,
 				  packet);
 	if (ret == 0) {
-		net->stats.tx_bytes += skb->len;
+		net->stats.tx_bytes += skb_length;
 		net->stats.tx_packets++;
 	} else {
 		kfree(packet);

[PATCH 3.14 28/37] ip6_gre: fix flowi6_proto value in xmit path

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit 3be07244b7337760a3269d56b2f4a63e72218648 ]

In xmit path, we build a flowi6 which will be used for the output route lookup.
We are sending a GRE packet, neither IPv4 nor IPv6 encapsulated packet, thus the
protocol should be IPPROTO_GRE.

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Reported-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_gre.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -787,7 +787,7 @@ static inline int ip6gre_xmit_ipv4(struc
 		encap_limit = t->parms.encap_limit;
 
 	memcpy(&fl6, &t->fl.u.ip6, sizeof(fl6));
-	fl6.flowi6_proto = IPPROTO_IPIP;
+	fl6.flowi6_proto = IPPROTO_GRE;
 
 	dsfield = ipv4_get_dsfield(iph);
 
@@ -837,7 +837,7 @@ static inline int ip6gre_xmit_ipv6(struc
 		encap_limit = t->parms.encap_limit;
 
 	memcpy(&fl6, &t->fl.u.ip6, sizeof(fl6));
-	fl6.flowi6_proto = IPPROTO_IPV6;
+	fl6.flowi6_proto = IPPROTO_GRE;
 
 	dsfield = ipv6_get_dsfield(ipv6h);
 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)

[PATCH 3.14 29/37] team: avoid race condition in scheduling delayed work

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Lawrence <Joe.Lawrence@stratus.com>

[ Upstream commit 47549650abd13d873fd2e5fc218db19e21031074 ]

When team_notify_peers and team_mcast_rejoin are called, they both reset
their respective .count_pending atomic variable. Then when the actual
worker function is executed, the variable is atomically decremented.
This pattern introduces a potential race condition where the
.count_pending rolls over and the worker function keeps rescheduling
until .count_pending decrements to zero again:

THREAD 1                           THREAD 2

========                           ========
team_notify_peers(teamX)
  atomic_set count_pending = 1
  schedule_delayed_work
                                   team_notify_peers(teamX)
                                   atomic_set count_pending = 1
team_notify_peers_work
  atomic_dec_and_test
    count_pending = 0
  (return)
                                   schedule_delayed_work
                                   team_notify_peers_work
                                   atomic_dec_and_test
                                     count_pending = -1
                                   schedule_delayed_work
                                   (repeat until count_pending = 0)

Instead of assigning a new value to .count_pending, use atomic_add to
tack-on the additional desired worker function invocations.

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Fixes: fc423ff00df3a19554414ee ("team: add peer notification")
Fixes: 492b200efdd20b8fcfdac87 ("team: add support for sending multicast rejoins")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/team/team.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -647,7 +647,7 @@ static void team_notify_peers(struct tea
 {
 	if (!team->notify_peers.count || !netif_running(team->dev))
 		return;
-	atomic_set(&team->notify_peers.count_pending, team->notify_peers.count);
+	atomic_add(team->notify_peers.count, &team->notify_peers.count_pending);
 	schedule_delayed_work(&team->notify_peers.dw, 0);
 }
 
@@ -687,7 +687,7 @@ static void team_mcast_rejoin(struct tea
 {
 	if (!team->mcast_rejoin.count || !netif_running(team->dev))
 		return;
-	atomic_set(&team->mcast_rejoin.count_pending, team->mcast_rejoin.count);
+	atomic_add(team->mcast_rejoin.count, &team->mcast_rejoin.count_pending);
 	schedule_delayed_work(&team->mcast_rejoin.dw, 0);
 }
 

[PATCH 3.14 30/37] sctp: handle association restarts when the socket is closed.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit bdf6fa52f01b941d4a80372d56de465bdbbd1d23 ]

Currently association restarts do not take into consideration the
state of the socket.  When a restart happens, the current assocation
simply transitions into established state.  This creates a condition
where a remote system, through a the restart procedure, may create a
local association that is no way reachable by user.  The conditions
to trigger this are as follows:
  1) Remote does not acknoledge some data causing data to remain
     outstanding.
  2) Local application calls close() on the socket.  Since data
     is still outstanding, the association is placed in SHUTDOWN_PENDING
     state.  However, the socket is closed.
  3) The remote tries to create a new association, triggering a restart
     on the local system.  The association moves from SHUTDOWN_PENDING
     to ESTABLISHED.  At this point, it is no longer reachable by
     any socket on the local system.

This patch addresses the above situation by moving the newly ESTABLISHED
association into SHUTDOWN-SENT state and bundling a SHUTDOWN after
the COOKIE-ACK chunk.  This way, the restarted associate immidiately
enters the shutdown procedure and forces the termination of the
unreachable association.

Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/sctp/command.h |    2 +-
 net/sctp/sm_statefuns.c    |   19 ++++++++++++++++---
 2 files changed, 17 insertions(+), 4 deletions(-)

--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -115,7 +115,7 @@ typedef enum {
  * analysis of the state functions, but in reality just taken from
  * thin air in the hopes othat we don't trigger a kernel panic.
  */
-#define SCTP_MAX_NUM_COMMANDS 14
+#define SCTP_MAX_NUM_COMMANDS 20
 
 typedef union {
 	__s32 i32;
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1775,9 +1775,22 @@ static sctp_disposition_t sctp_sf_do_dup
 	/* Update the content of current association. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
 	sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
-	sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-			SCTP_STATE(SCTP_STATE_ESTABLISHED));
-	sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
+	if (sctp_state(asoc, SHUTDOWN_PENDING) &&
+	    (sctp_sstate(asoc->base.sk, CLOSING) ||
+	     sock_flag(asoc->base.sk, SOCK_DEAD))) {
+		/* if were currently in SHUTDOWN_PENDING, but the socket
+		 * has been closed by user, don't transition to ESTABLISHED.
+		 * Instead trigger SHUTDOWN bundled with COOKIE_ACK.
+		 */
+		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
+		return sctp_sf_do_9_2_start_shutdown(net, ep, asoc,
+						     SCTP_ST_CHUNK(0), NULL,
+						     commands);
+	} else {
+		sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
+				SCTP_STATE(SCTP_STATE_ESTABLISHED));
+		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
+	}
 	return SCTP_DISPOSITION_CONSUME;
 
 nomem_ev:

[PATCH 3.14 31/37] tcp: fixing TLPs FIN recovery

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Per Hurtig <per.hurtig@kau.se>

[ Upstream commit bef1909ee3ed1ca39231b260a8d3b4544ecd0c8f ]

Fix to a problem observed when losing a FIN segment that does not
contain data.  In such situations, TLP is unable to recover from
*any* tail loss and instead adds at least PTO ms to the
retransmission process, i.e., RTO = RTO + PTO.

Signed-off-by: Per Hurtig <per.hurtig@kau.se>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2069,9 +2069,7 @@ void tcp_send_loss_probe(struct sock *sk
 	if (WARN_ON(!skb || !tcp_skb_pcount(skb)))
 		goto rearm_timer;
 
-	/* Probe with zero data doesn't trigger fast recovery. */
-	if (skb->len > 0)
-		err = __tcp_retransmit_skb(sk, skb);
+	err = __tcp_retransmit_skb(sk, skb);
 
 	/* Record snd_nxt for loss detection. */
 	if (likely(!err))

[PATCH 3.14 32/37] USB: Add device quirk for ASUS T100 Base Station keyboard

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lu Baolu <baolu.lu@linux.intel.com>

commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream.

This full-speed USB device generates spurious remote wakeup event
as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result,
Linux can't enter system suspend and S0ix power saving modes once
this keyboard is used.

This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk.
With this quirk set, wakeup capability will be ignored during
device configure.

This patch could be back-ported to kernels as old as 2.6.39.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c     |    6 ++++--
 drivers/usb/core/quirks.c  |    4 ++++
 include/linux/usb/quirks.h |    3 +++
 3 files changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1948,8 +1948,10 @@ void usb_set_device_state(struct usb_dev
 					|| new_state == USB_STATE_SUSPENDED)
 				;	/* No change to wakeup settings */
 			else if (new_state == USB_STATE_CONFIGURED)
-				wakeup = udev->actconfig->desc.bmAttributes
-					 & USB_CONFIG_ATT_WAKEUP;
+				wakeup = (udev->quirks &
+					USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 :
+					udev->actconfig->desc.bmAttributes &
+					USB_CONFIG_ATT_WAKEUP;
 			else
 				wakeup = 0;
 		}
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -160,6 +160,10 @@ static const struct usb_device_id usb_in
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
 	  .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* ASUS Base Station(T100) */
+	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	{ }  /* terminating entry must be last */
 };
 
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -30,4 +30,7 @@
    descriptor */
 #define USB_QUIRK_DELAY_INIT		0x00000040
 
+/* device generates spurious wakeup, ignore remote wakeup capability */
+#define USB_QUIRK_IGNORE_REMOTE_WAKEUP	0x00000200
+
 #endif /* __LINUX_USB_QUIRKS_H */

[PATCH 3.14 33/37] USB: serial: cp210x: added Ketra N1 wireless interface support

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Savage <joe.savage@goketra.com>

commit bfc2d7dfdd761ae3beccdb26abebe03cef042f46 upstream.

Added support for Ketra N1 wireless interface, which uses the
Silicon Labs' CP2104 USB to UART bridge with customized PID 8946.

Signed-off-by: Joe Savage <joe.savage@goketra.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -122,6 +122,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */

[PATCH 3.14 34/37] USB: cp210x: add support for Seluxit USB dongle

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Bomholtz <andreas@seluxit.com>

commit dee80ad12d2b1b304286a707fde7ab05d1fc7bab upstream.

Added the Seluxit ApS USB Serial Dongle to cp210x driver.

Signed-off-by: Andreas Bomholtz <andreas@seluxit.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -156,6 +156,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
 	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */

[PATCH 3.14 35/37] usb: musb: dsps: kill OTG timer on suspend

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <balbi@ti.com>

commit 468bcc2a2ca071f652009d2d20d97f2437630cae upstream.

if we don't make sure to kill the timer, it could
expire after we have already gated our clocks.

That will trigger a Data Abort exception because
we would try to access register while clock is gated.

Fix that bug.

Fixes 869c597 (usb: musb: dsps: add support for suspend and resume)
Tested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_dsps.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -707,6 +707,7 @@ static int dsps_suspend(struct device *d
 	struct musb *musb = platform_get_drvdata(glue->musb);
 	void __iomem *mbase = musb->ctrl_base;
 
+	del_timer_sync(&glue->timer);
 	glue->context.control = dsps_readl(mbase, wrp->control);
 	glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
 	glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
@@ -732,6 +733,7 @@ static int dsps_resume(struct device *de
 	dsps_writel(mbase, wrp->mode, glue->context.mode);
 	dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
 	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
 
 	return 0;
 }

[PATCH 3.14 36/37] crypto: caam - fix addressing of struct member

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cristian Stoica <cristian.stoica@freescale.com>

commit 4451d494b1910bf7b7f8381a637d0fe6d2142467 upstream.

buf_0 and buf_1 in caam_hash_state are not next to each other.
Accessing buf_1 is incorrect from &buf_0 with an offset of only
size_of(buf_0). The same issue is also with buflen_0 and buflen_1

Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/caam/caamhash.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -1348,9 +1348,9 @@ static int ahash_update_first(struct aha
 	struct device *jrdev = ctx->jrdev;
 	gfp_t flags = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
 		       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
-	u8 *next_buf = state->buf_0 + state->current_buf *
-		       CAAM_MAX_HASH_BLOCK_SIZE;
-	int *next_buflen = &state->buflen_0 + state->current_buf;
+	u8 *next_buf = state->current_buf ? state->buf_1 : state->buf_0;
+	int *next_buflen = state->current_buf ?
+		&state->buflen_1 : &state->buflen_0;
 	int to_hash;
 	u32 *sh_desc = ctx->sh_desc_update_first, *desc;
 	dma_addr_t ptr = ctx->sh_desc_update_first_dma;

[PATCH 3.14 37/37] serial: 8250: Add Quark X1000 to 8250_pci.c

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryan O'Donoghue <pure.logic@nexus-software.ie>

commit 1ede7dcca3c4fa15a518ab0473126f9c3e621e4c upstream.

Quark X1000 contains two designware derived 8250 serial ports.
Each port has a unique PCI configuration space consisting of
BAR0:UART BAR1:DMA respectively.

Unlike the standard 8250 the register width is 32 bits for RHR,IER etc
The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a
bitrate of up to about 2.76 megabits per second.

This patch enables standard 8250 mode

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1766,6 +1766,7 @@ pci_wch_ch353_setup(struct serial_privat
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
+#define PCI_DEVICE_ID_INTEL_QRK_UART	0x0936
 
 #define PCI_VENDOR_ID_SUNIX		0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999	0x1999
@@ -1876,6 +1877,13 @@ static struct pci_serial_quirk pci_seria
 		.subdevice	= PCI_ANY_ID,
 		.setup		= byt_serial_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_QRK_UART,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_default_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -2710,6 +2718,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
 	pbn_byt,
+	pbn_qrk,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
 	pbn_brcm_trumanage,
@@ -3456,6 +3465,12 @@ static struct pciserial_board pci_boards
 		.uart_offset	= 0x80,
 		.reg_shift      = 2,
 	},
+	[pbn_qrk] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 2764800,
+		.reg_shift	= 2,
+	},
 	[pbn_omegapci] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 8,
@@ -5150,6 +5165,12 @@ static struct pci_device_id serial_pci_t
 		pbn_byt },
 
 	/*
+	 * Intel Quark x1000
+	 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_qrk },
+	/*
 	 * Cronyx Omega PCI
 	 */
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,

Re: [PATCH 3.14 00/37] 3.14.22-stable review

[Guenter Roeck]

On 10/12/2014 07:23 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.22 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Oct 15 02:23:50 UTC 2014.
> Anything received after that time might be too late.
>

Build results:
	total: 137 pass: 137 fail: 0

Qemu test results:
	total: 30 pass: 30 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.14 00/37] 3.14.22-stable review

[Shuah Khan]

On 10/12/2014 08:23 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.22 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Oct 15 02:23:50 UTC 2014.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.22-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

-- Shuah


-- 
Shuah Khan
Sr. Linux Kernel Developer
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH 3.14 36/37] crypto: caam - fix addressing of struct member

[Cristian Stoica]

Hi Greg,

You can cherry-pick 307fd543f3d23f8f56850eca1b27b1be2fe71017 on stable
3.13+ as well. The original 'cc stable 3.13+' line was deleted by
mistake during commit.

Thank you,
Cristian S.





On 10/13/2014 05:24 AM, Greg Kroah-Hartman wrote:
> 3.14-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Cristian Stoica <cristian.stoica@freescale.com>
> 
> commit 4451d494b1910bf7b7f8381a637d0fe6d2142467 upstream.
> 
> buf_0 and buf_1 in caam_hash_state are not next to each other.
> Accessing buf_1 is incorrect from &buf_0 with an offset of only
> size_of(buf_0). The same issue is also with buflen_0 and buflen_1
> 
> Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/crypto/caam/caamhash.c |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> --- a/drivers/crypto/caam/caamhash.c
> +++ b/drivers/crypto/caam/caamhash.c
> @@ -1348,9 +1348,9 @@ static int ahash_update_first(struct aha
>  	struct device *jrdev = ctx->jrdev;
>  	gfp_t flags = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
>  		       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
> -	u8 *next_buf = state->buf_0 + state->current_buf *
> -		       CAAM_MAX_HASH_BLOCK_SIZE;
> -	int *next_buflen = &state->buflen_0 + state->current_buf;
> +	u8 *next_buf = state->current_buf ? state->buf_1 : state->buf_0;
> +	int *next_buflen = state->current_buf ?
> +		&state->buflen_1 : &state->buflen_0;
>  	int to_hash;
>  	u32 *sh_desc = ctx->sh_desc_update_first, *desc;
>  	dma_addr_t ptr = ctx->sh_desc_update_first_dma;
> 
> 

Re: [PATCH 3.14 36/37] crypto: caam - fix addressing of struct member

[Greg Kroah-Hartman]

On Tue, Oct 14, 2014 at 11:31:56AM +0300, Cristian Stoica wrote:
> Hi Greg,
> 
> You can cherry-pick 307fd543f3d23f8f56850eca1b27b1be2fe71017 on stable
> 3.13+ as well. The original 'cc stable 3.13+' line was deleted by
> mistake during commit.

3.13-stable is long dead and not being maintained by me anymore, sorry.

greg k-h

Re: [PATCH 3.14 36/37] crypto: caam - fix addressing of struct member

[Cristian Stoica]

I mean whatever is currently stable, maintained and more recent than 3.13.

Thanks,
Cristian S.


On 10/14/2014 11:38 AM, Greg Kroah-Hartman wrote:
> On Tue, Oct 14, 2014 at 11:31:56AM +0300, Cristian Stoica wrote:
>> Hi Greg,
>>
>> You can cherry-pick 307fd543f3d23f8f56850eca1b27b1be2fe71017 on stable
>> 3.13+ as well. The original 'cc stable 3.13+' line was deleted by
>> mistake during commit.
> 
> 3.13-stable is long dead and not being maintained by me anymore, sorry.
> 
> greg k-h
>