From: Simon Horman <horms@verge.net.au>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
Date: Mon, 27 Oct 2014 01:23:22 +0000 [thread overview]
Message-ID: <20141027012321.GE30485@verge.net.au> (raw)
In-Reply-To: <1414152241-5390-6-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
On Fri, Oct 24, 2014 at 03:03:57PM +0300, Laurent Pinchart wrote:
> Specify the DU output topology, enable the DU device and configure the
> related pins.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
I have this patch queued up but I notice that it seems to introduce
the following warnings. Can this be addressed somehow?
Warning (reg_format): "reg" property in /lvds-encoder/ports/port@0 has invalid length (4 bytes) (#address-cells = 2, #size-cells = 1)
Warning (reg_format): "reg" property in /lvds-encoder/ports/port@1 has invalid length (4 bytes) (#address-cells = 2, #size-cells = 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /lvds-encoder/ports/port@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /lvds-encoder/ports/port@0
Warning (avoid_default_addr_size): Relying on default #address-cells value for /lvds-encoder/ports/port@1
Warning (avoid_default_addr_size): Relying on default #size-cells value for /lvds-encoder/ports/port@1
> ---
> arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
> index 9e1b859190ca..64a5d634edc1 100644
> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
> @@ -69,6 +69,76 @@
> gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> + vga-encoder {
> + compatible = "adi,adv7123";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + vga_enc_in: endpoint {
> + remote-endpoint = <&du_out_rgb0>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + vga_enc_out: endpoint {
> + remote-endpoint = <&vga_in>;
> + };
> + };
> + };
> + };
> +
> + vga {
> + compatible = "vga-connector";
> +
> + port {
> + vga_in: endpoint {
> + remote-endpoint = <&vga_enc_out>;
> + };
> + };
> + };
> +
> + lvds-enc {
> + compatible = "thine,thc63lvdm83d";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + port@0 {
> + lvds_enc_in: endpoint {
> + remote-endpoint = <&du_out_rgb1>;
> + };
> + };
> + port@1 {
> + lvds_connector: endpoint {
> + };
> + };
> + };
> + };
> +};
> +
> +&du {
> + pinctrl-0 = <&du_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + ports {
> + port@0 {
> + endpoint {
> + remote-endpoint = <&vga_enc_in>;
> + };
> + };
> + port@1 {
> + endpoint {
> + remote-endpoint = <&lvds_enc_in>;
> + };
> + };
> + };
> };
>
> &irqpin0 {
> @@ -84,6 +154,17 @@
> };
>
> &pfc {
> + du_pins: du {
> + du0 {
> + renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
> + renesas,function = "du0";
> + };
> + du1 {
> + renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
> + renesas,function = "du1";
> + };
> + };
> +
> lan0_pins: lan0 {
> intc {
> renesas,groups = "intc_irq1_b";
> --
> 2.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-10-27 1:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
2014-10-24 12:36 ` Sergei Shtylyov
2014-10-26 12:49 ` Laurent Pinchart
2014-10-26 13:04 ` Sergei Shtylyov
2014-10-26 13:16 ` Laurent Pinchart
2014-10-27 1:23 ` Simon Horman [this message]
2014-10-27 9:18 ` Geert Uytterhoeven
2014-10-27 9:27 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141027012321.GE30485@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.