All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Smith <sdjhkhjkjffsd@gw91.33mail.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [Bug 1386197] [NEW] keyboard suddenly stops working in VM and problem persists until host reboot. All super-standard setup no funny stuff
Date: Mon, 27 Oct 2014 13:29:11 -0000	[thread overview]
Message-ID: <20141027132911.2480.54218.malonedeb@gac.canonical.com> (raw)
In-Reply-To: 20141027132911.2480.54218.malonedeb@gac.canonical.com

Public bug reported:

QEMU emulator version 2.1.2, Copyright (c) 2003-2008 Fabrice Bellard
Linux HOST 3.16.3-1-ck #1 SMP PREEMPT Sun Sep 21 11:27:46 CEST 2014 x86_64 GNU/Linux

qemu-system-x86_64 -daemonize -enable-kvm -cpu host -smp
4,maxcpus=4,sockets=1,cores=2,threads=1 -m 4096 -monitor
telnet:127.0.0.1:4446,server,nowait -vga qxl -spice
port=5556,ipv4,addr=127.0.0.1,disable-ticketing -soundhw all -net
tap,script=no,ifname=vm6,vlan=0,vnet_hdr=on -net
nic,macaddr=52:54:00:2A:F1:16,vlan=0,model=virtio -drive file=/mnt/2/VM
/vm-centos.qcow2,cache=writeback,index=0,media=disk,if=virtio,aio=native
-boot c -vnc :6


I already had this with ubanto VM so I installed a centos one but then I type HDD password in VNC suddenly keyboard stops working forever. Kill qemu, stop qemu, start again ... same issue. Very strange. Problem in VNC, problem in vga std problem in spicec problem with options problem without options, SDL no SDL and nothing helps. dmesg only shows unhandled wrmsr like always .. so irrelevant. 

Must be problem with new kernel or nvidia driver mystery magic I
suppose? But I had riced CK kernel before and no issue. Hardware didn't
change. Nothing works, what is this? Can do sendkey 1 1 in console no
issue. So why is all keyboard input dead in mid-operation? You see after
reboot I open VM and no matter what VNC or spicec or SDL I input
keyboard all normal then this! BAM all keyboard input gone! So in ubuntu
I still had mouse so I used onscreen keyboard to enable SSH and then I
didn't care. But now I have harddrive password, what can I do? Install
different QEMU but I suppose problem with new kernel xorg stuff rather
... Can't change that! Help much appreciated.

** Affects: qemu
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1386197

Title:
  keyboard suddenly stops working in VM and problem persists until host
  reboot. All super-standard setup no funny stuff

Status in QEMU:
  New

Bug description:
  QEMU emulator version 2.1.2, Copyright (c) 2003-2008 Fabrice Bellard
  Linux HOST 3.16.3-1-ck #1 SMP PREEMPT Sun Sep 21 11:27:46 CEST 2014 x86_64 GNU/Linux

  qemu-system-x86_64 -daemonize -enable-kvm -cpu host -smp
  4,maxcpus=4,sockets=1,cores=2,threads=1 -m 4096 -monitor
  telnet:127.0.0.1:4446,server,nowait -vga qxl -spice
  port=5556,ipv4,addr=127.0.0.1,disable-ticketing -soundhw all -net
  tap,script=no,ifname=vm6,vlan=0,vnet_hdr=on -net
  nic,macaddr=52:54:00:2A:F1:16,vlan=0,model=virtio -drive
  file=/mnt/2/VM/vm-
  centos.qcow2,cache=writeback,index=0,media=disk,if=virtio,aio=native
  -boot c -vnc :6

  
  I already had this with ubanto VM so I installed a centos one but then I type HDD password in VNC suddenly keyboard stops working forever. Kill qemu, stop qemu, start again ... same issue. Very strange. Problem in VNC, problem in vga std problem in spicec problem with options problem without options, SDL no SDL and nothing helps. dmesg only shows unhandled wrmsr like always .. so irrelevant. 

  Must be problem with new kernel or nvidia driver mystery magic I
  suppose? But I had riced CK kernel before and no issue. Hardware
  didn't change. Nothing works, what is this? Can do sendkey 1 1 in
  console no issue. So why is all keyboard input dead in mid-operation?
  You see after reboot I open VM and no matter what VNC or spicec or SDL
  I input keyboard all normal then this! BAM all keyboard input gone! So
  in ubuntu I still had mouse so I used onscreen keyboard to enable SSH
  and then I didn't care. But now I have harddrive password, what can I
  do? Install different QEMU but I suppose problem with new kernel xorg
  stuff rather ... Can't change that! Help much appreciated.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1386197/+subscriptions

       reply	other threads:[~2014-10-27 13:35 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-27 13:29 John Smith [this message]
2014-10-27 14:24 ` [Qemu-devel] [Bug 1386197] Re: keyboard suddenly stops working in VM and problem persists until host reboot. All super-standard setup no funny stuff John Smith
2018-04-18 15:51 ` Thomas Huth
2018-06-18  4:17 ` Launchpad Bug Tracker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141027132911.2480.54218.malonedeb@gac.canonical.com \
    --to=sdjhkhjkjffsd@gw91.33mail.com \
    --cc=1386197@bugs.launchpad.net \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.