N900 modem support in 3.18-rc1

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

I'd like to test a modem (and eventually to get it to work :-) ) on
n900. So far I found:

http://lwn.net/Articles/592485/

It says:

# supported. Testing the patchset with ofono works like this:
# 
#  # provide cmt device for ofono
#  ln -sf /sys/bus/hsi/n900-modem /dev/cmt

root@n900:/dev# ln -sf /sys/bus/hsi/n900-modem /dev/cmt
root@n900:/dev# ls -al /dev/cmt
lrwxrwxrwx 1 root root 23 Jan  1 08:51 /dev/cmt ->
/sys/bus/hsi/n900-modem
root@n900:/dev# cat /dev/cmt
cat: /dev/cmt: No such file or directory
root@n900:/dev# cd /dev/cmt
-bash: cd: /dev/cmt: No such file or directory
root@n900:/dev# 
root@n900:/dev# ls -al /sys/bus/hsi/
devices/           drivers_autoprobe  uevent             
drivers/           drivers_probe      
root@n900:/dev# ls -al /sys/bus/hsi/devices/
cmt_speech/   hsi_char/     n900-modem/   ssi-protocol/ 
root@n900:/dev# ls -al /sys/bus/hsi/devices/n900-modem
lrwxrwxrwx 1 root root 0 Jan  1 08:46 /sys/bus/hsi/devices/n900-modem
->
../../../devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/n900-modem
root@n900:/dev# 

That seemed to match, so I symlinked it.

#  # start ofono
#  ofono --nodetach --debug

It it a typo and it wants ofonod?

root@n900:~# ofonod --nodetach --debug &
[1] 3552
root@n900:~# ofonod[3552]: oFono version 1.6

#  # enable the modem
#  mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Powered true

root@n900:~# mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty
Powered true
[ERR]: There is no method with name org.ofono.Modem.SetProperty on
path /n900_0!

#  # enable modem's RF parts
#  mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Online true

root@n900:~# mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty
Online true
[ERR]: There is no method with name org.ofono.Modem.SetProperty on
path /n900_0!

#  # scan for available networks (takes some time)
#  mdbus2 -s org.ofono /n900_0 org.ofono.NetworkRegistration.Scan

root@n900:~# mdbus2 -s org.ofono /n900_0
org.ofono.NetworkRegistration.Scan
[ERR]: There is no method with name org.ofono.NetworkRegistration.Scan
on path /n900_0!

Any ideas? Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

I'd like to test a modem (and eventually to get it to work :-) ) on
n900. So far I found:

http://lwn.net/Articles/592485/

It says:

# supported. Testing the patchset with ofono works like this:
# 
#  # provide cmt device for ofono
#  ln -sf /sys/bus/hsi/n900-modem /dev/cmt

root at n900:/dev# ln -sf /sys/bus/hsi/n900-modem /dev/cmt
root at n900:/dev# ls -al /dev/cmt
lrwxrwxrwx 1 root root 23 Jan  1 08:51 /dev/cmt ->
/sys/bus/hsi/n900-modem
root at n900:/dev# cat /dev/cmt
cat: /dev/cmt: No such file or directory
root at n900:/dev# cd /dev/cmt
-bash: cd: /dev/cmt: No such file or directory
root at n900:/dev# 
root at n900:/dev# ls -al /sys/bus/hsi/
devices/           drivers_autoprobe  uevent             
drivers/           drivers_probe      
root at n900:/dev# ls -al /sys/bus/hsi/devices/
cmt_speech/   hsi_char/     n900-modem/   ssi-protocol/ 
root at n900:/dev# ls -al /sys/bus/hsi/devices/n900-modem
lrwxrwxrwx 1 root root 0 Jan  1 08:46 /sys/bus/hsi/devices/n900-modem
->
../../../devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/n900-modem
root at n900:/dev# 

That seemed to match, so I symlinked it.

#  # start ofono
#  ofono --nodetach --debug

It it a typo and it wants ofonod?

root at n900:~# ofonod --nodetach --debug &
[1] 3552
root at n900:~# ofonod[3552]: oFono version 1.6

#  # enable the modem
#  mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Powered true

root at n900:~# mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty
Powered true
[ERR]: There is no method with name org.ofono.Modem.SetProperty on
path /n900_0!

#  # enable modem's RF parts
#  mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Online true

root at n900:~# mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty
Online true
[ERR]: There is no method with name org.ofono.Modem.SetProperty on
path /n900_0!

#  # scan for available networks (takes some time)
#  mdbus2 -s org.ofono /n900_0 org.ofono.NetworkRegistration.Scan

root at n900:~# mdbus2 -s org.ofono /n900_0
org.ofono.NetworkRegistration.Scan
[ERR]: There is no method with name org.ofono.NetworkRegistration.Scan
on path /n900_0!

Any ideas? Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1272 bytes --]

Hi Pavel,

On Tue, Nov 04, 2014 at 09:51:17PM +0100, Pavel Machek wrote:
> I'd like to test a modem (and eventually to get it to work :-) ) on
> n900. So far I found:
> 
> http://lwn.net/Articles/592485/
> 
> It says:
> 
> # supported. Testing the patchset with ofono works like this:
> # 
> #  # provide cmt device for ofono
> #  ln -sf /sys/bus/hsi/n900-modem /dev/cmt
> 
> [...]
>
> That seemed to match, so I symlinked it.

looks ok. You should have the following files:

/dev/cmt/cmt_apeslpx
/dev/cmt/cmt_bsi
/dev/cmt/cmt_en
/dev/cmt/cmt_rst_rq
/dev/cmt/cmt_rst

Apart from that the kernel should be provide a phonet0
network device.

> #  # start ofono
> #  ofono --nodetach --debug
> 
> It it a typo and it wants ofonod?

yes.

> root@n900:~# ofonod --nodetach --debug &
> [1] 3552

no output from ofono?

> root@n900:~# mdbus2 -s org.ofono /n900_0 xyz
> [ERR]: There is no method with name xyz on path /n900_0!
>
> [...]
> 
> Any ideas?

call mdbus2 with fewer arguments to see what is available on the
bus:

mdbus2 -s                      => list all system services
mdbus2 -s org.ofono            => list all ofono objects
mdbus2 -s org.ofono /n900_0    => list all methods from n900 object

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

N900 modem support in 3.18-rc1

[Sebastian Reichel]

Hi Pavel,

On Tue, Nov 04, 2014 at 09:51:17PM +0100, Pavel Machek wrote:
> I'd like to test a modem (and eventually to get it to work :-) ) on
> n900. So far I found:
> 
> http://lwn.net/Articles/592485/
> 
> It says:
> 
> # supported. Testing the patchset with ofono works like this:
> # 
> #  # provide cmt device for ofono
> #  ln -sf /sys/bus/hsi/n900-modem /dev/cmt
> 
> [...]
>
> That seemed to match, so I symlinked it.

looks ok. You should have the following files:

/dev/cmt/cmt_apeslpx
/dev/cmt/cmt_bsi
/dev/cmt/cmt_en
/dev/cmt/cmt_rst_rq
/dev/cmt/cmt_rst

Apart from that the kernel should be provide a phonet0
network device.

> #  # start ofono
> #  ofono --nodetach --debug
> 
> It it a typo and it wants ofonod?

yes.

> root at n900:~# ofonod --nodetach --debug &
> [1] 3552

no output from ofono?

> root at n900:~# mdbus2 -s org.ofono /n900_0 xyz
> [ERR]: There is no method with name xyz on path /n900_0!
>
> [...]
> 
> Any ideas?

call mdbus2 with fewer arguments to see what is available on the
bus:

mdbus2 -s                      => list all system services
mdbus2 -s org.ofono            => list all ofono objects
mdbus2 -s org.ofono /n900_0    => list all methods from n900 object

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141105/399324a5/attachment-0001.sig>

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

On Wed 2014-11-05 02:11:22, Sebastian Reichel wrote:
> Hi Pavel,
> 
> On Tue, Nov 04, 2014 at 09:51:17PM +0100, Pavel Machek wrote:
> > I'd like to test a modem (and eventually to get it to work :-) ) on
> > n900. So far I found:
> > 
> > http://lwn.net/Articles/592485/
> > 
> > It says:
> > 
> > # supported. Testing the patchset with ofono works like this:
> > # 
> > #  # provide cmt device for ofono
> > #  ln -sf /sys/bus/hsi/n900-modem /dev/cmt
> > 
> > [...]
> >
> > That seemed to match, so I symlinked it.
> 
> looks ok. You should have the following files:
> 
> /dev/cmt/cmt_apeslpx
> /dev/cmt/cmt_bsi
> /dev/cmt/cmt_en
> /dev/cmt/cmt_rst_rq
> /dev/cmt/cmt_rst

No, it is not ok :-(. I did enable CONFIG_CMT now (it was not enabled
before, and wow, that entry has least helpful config help, ever; is it
related?), but still can't see the required files:

root@n900:/sys# find . | grep cmt
./bus/hsi/devices/cmt_speech
./bus/hsi/drivers/cmt_speech
./bus/hsi/drivers/cmt_speech/bind
./bus/hsi/drivers/cmt_speech/cmt_speech
./bus/hsi/drivers/cmt_speech/uevent
./bus/hsi/drivers/cmt_speech/unbind
./devices/virtual/misc/cmt_speech
./devices/virtual/misc/cmt_speech/dev
./devices/virtual/misc/cmt_speech/power
./devices/virtual/misc/cmt_speech/power/control
./devices/virtual/misc/cmt_speech/power/runtime_active_time
./devices/virtual/misc/cmt_speech/power/autosuspend_delay_ms
./devices/virtual/misc/cmt_speech/power/runtime_status
./devices/virtual/misc/cmt_speech/power/runtime_suspended_time
./devices/virtual/misc/cmt_speech/subsystem
./devices/virtual/misc/cmt_speech/uevent
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/control
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_active_time
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/autosuspend_delay_ms
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_status
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_suspended_time
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/modalias
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/driver
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/subsystem
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/uevent
./class/misc/cmt_speech
root@n900:/sys# 

(What does CMT mean? I should fix the help files, I guess...)


> > root@n900:~# ofonod --nodetach --debug &
> > [1] 3552
> 
> no output from ofono?

Actually, a lot of output from ofonod, but nothing useful.

> > root@n900:~# mdbus2 -s org.ofono /n900_0 xyz
> > [ERR]: There is no method with name xyz on path /n900_0!
> >
> > [...]
> > 
> > Any ideas?
> 
> call mdbus2 with fewer arguments to see what is available on the
> bus:
> 
> mdbus2 -s                      => list all system services
> mdbus2 -s org.ofono            => list all ofono objects
> mdbus2 -s org.ofono /n900_0    => list all methods from n900 object

root@n900:~# mdbus2 -s org.ofono
/
root@n900:~# 

But since I do not have required cmt_ files, I guess that's expected?


Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

On Wed 2014-11-05 02:11:22, Sebastian Reichel wrote:
> Hi Pavel,
> 
> On Tue, Nov 04, 2014 at 09:51:17PM +0100, Pavel Machek wrote:
> > I'd like to test a modem (and eventually to get it to work :-) ) on
> > n900. So far I found:
> > 
> > http://lwn.net/Articles/592485/
> > 
> > It says:
> > 
> > # supported. Testing the patchset with ofono works like this:
> > # 
> > #  # provide cmt device for ofono
> > #  ln -sf /sys/bus/hsi/n900-modem /dev/cmt
> > 
> > [...]
> >
> > That seemed to match, so I symlinked it.
> 
> looks ok. You should have the following files:
> 
> /dev/cmt/cmt_apeslpx
> /dev/cmt/cmt_bsi
> /dev/cmt/cmt_en
> /dev/cmt/cmt_rst_rq
> /dev/cmt/cmt_rst

No, it is not ok :-(. I did enable CONFIG_CMT now (it was not enabled
before, and wow, that entry has least helpful config help, ever; is it
related?), but still can't see the required files:

root at n900:/sys# find . | grep cmt
./bus/hsi/devices/cmt_speech
./bus/hsi/drivers/cmt_speech
./bus/hsi/drivers/cmt_speech/bind
./bus/hsi/drivers/cmt_speech/cmt_speech
./bus/hsi/drivers/cmt_speech/uevent
./bus/hsi/drivers/cmt_speech/unbind
./devices/virtual/misc/cmt_speech
./devices/virtual/misc/cmt_speech/dev
./devices/virtual/misc/cmt_speech/power
./devices/virtual/misc/cmt_speech/power/control
./devices/virtual/misc/cmt_speech/power/runtime_active_time
./devices/virtual/misc/cmt_speech/power/autosuspend_delay_ms
./devices/virtual/misc/cmt_speech/power/runtime_status
./devices/virtual/misc/cmt_speech/power/runtime_suspended_time
./devices/virtual/misc/cmt_speech/subsystem
./devices/virtual/misc/cmt_speech/uevent
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/control
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_active_time
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/autosuspend_delay_ms
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_status
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_suspended_time
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/modalias
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/driver
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/subsystem
./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/uevent
./class/misc/cmt_speech
root at n900:/sys# 

(What does CMT mean? I should fix the help files, I guess...)


> > root at n900:~# ofonod --nodetach --debug &
> > [1] 3552
> 
> no output from ofono?

Actually, a lot of output from ofonod, but nothing useful.

> > root at n900:~# mdbus2 -s org.ofono /n900_0 xyz
> > [ERR]: There is no method with name xyz on path /n900_0!
> >
> > [...]
> > 
> > Any ideas?
> 
> call mdbus2 with fewer arguments to see what is available on the
> bus:
> 
> mdbus2 -s                      => list all system services
> mdbus2 -s org.ofono            => list all ofono objects
> mdbus2 -s org.ofono /n900_0    => list all methods from n900 object

root at n900:~# mdbus2 -s org.ofono
/
root at n900:~# 

But since I do not have required cmt_ files, I guess that's expected?


Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Pali Rohár]

[-- Attachment #1: Type: Text/Plain, Size: 82 bytes --]

Hello, have you enabled CONFIG_PHONET?

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

N900 modem support in 3.18-rc1

[Pali Rohár]

Hello, have you enabled CONFIG_PHONET?

-- 
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141105/04d887d4/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Hello, have you enabled CONFIG_PHONET?

Yes:

CONFIG_PHONET=y

And this:

# SPI Protocol Masters                                                                            
#                                                                                                 
# CONFIG_SPI_SPIDEV is not set                                                                    
# CONFIG_SPI_TLE62X0 is not set                                                                   
# CONFIG_SPMI is not set                                                                          
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#                                                                                                 
# HSI controllers                                                                                 
#                                                                                                 
CONFIG_OMAP_SSI=y
CONFIG_OMAP_SSI_PORT=y

#                                                                                                 
# HSI clients                                                                                     
#                                                                                                 
CONFIG_NOKIA_MODEM=y
CONFIG_SSI_PROTOCOL=y
CONFIG_HSI_CHAR=y
CONFIG_HSI_CMT_SPEECH=y

Best regards,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Hello, have you enabled CONFIG_PHONET?

Yes:

CONFIG_PHONET=y

And this:

# SPI Protocol Masters                                                                            
#                                                                                                 
# CONFIG_SPI_SPIDEV is not set                                                                    
# CONFIG_SPI_TLE62X0 is not set                                                                   
# CONFIG_SPMI is not set                                                                          
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#                                                                                                 
# HSI controllers                                                                                 
#                                                                                                 
CONFIG_OMAP_SSI=y
CONFIG_OMAP_SSI_PORT=y

#                                                                                                 
# HSI clients                                                                                     
#                                                                                                 
CONFIG_NOKIA_MODEM=y
CONFIG_SSI_PROTOCOL=y
CONFIG_HSI_CHAR=y
CONFIG_HSI_CMT_SPEECH=y

Best regards,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Pali Rohár]

[-- Attachment #1: Type: Text/Plain, Size: 1078 bytes --]

Maybe you need to enable modem?

This is n900 init sequence from script: nokia-n900-configs.sh

    # set up the GPIO's for N900 modem:
    echo 70 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio70/direction
    echo 0 >/sys/class/gpio/gpio70/value
    echo 73 >/sys/class/gpio/export
    echo high >/sys/class/gpio/gpio73/direction
    echo 0 >/sys/class/gpio/gpio73/value
    echo 74 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio74/direction
    echo 75 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio75/direction
    echo 157 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio157/direction
    echo 0 >/sys/class/gpio/gpio157/value
    # create symlinks for ofono N900 plugin
    mkdir -p /dev/cmt
    ln -nsf /sys/class/gpio/gpio70 /dev/cmt/cmt_apeslpx
    ln -nsf /sys/class/gpio/gpio74 /dev/cmt/cmt_en
    ln -nsf /sys/class/gpio/gpio73 /dev/cmt/cmt_rst_rq
    ln -nsf /sys/class/gpio/gpio75 /dev/cmt/cmt_rst
    ln -nsf /sys/class/gpio/gpio157 /dev/cmt/cmt_bsi

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: N900 modem support in 3.18-rc1

[Pali Rohár]

[-- Attachment #1.1: Type: Text/Plain, Size: 1078 bytes --]

Maybe you need to enable modem?

This is n900 init sequence from script: nokia-n900-configs.sh

    # set up the GPIO's for N900 modem:
    echo 70 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio70/direction
    echo 0 >/sys/class/gpio/gpio70/value
    echo 73 >/sys/class/gpio/export
    echo high >/sys/class/gpio/gpio73/direction
    echo 0 >/sys/class/gpio/gpio73/value
    echo 74 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio74/direction
    echo 75 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio75/direction
    echo 157 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio157/direction
    echo 0 >/sys/class/gpio/gpio157/value
    # create symlinks for ofono N900 plugin
    mkdir -p /dev/cmt
    ln -nsf /sys/class/gpio/gpio70 /dev/cmt/cmt_apeslpx
    ln -nsf /sys/class/gpio/gpio74 /dev/cmt/cmt_en
    ln -nsf /sys/class/gpio/gpio73 /dev/cmt/cmt_rst_rq
    ln -nsf /sys/class/gpio/gpio75 /dev/cmt/cmt_rst
    ln -nsf /sys/class/gpio/gpio157 /dev/cmt/cmt_bsi

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

N900 modem support in 3.18-rc1

[Pali Rohár]

Maybe you need to enable modem?

This is n900 init sequence from script: nokia-n900-configs.sh

    # set up the GPIO's for N900 modem:
    echo 70 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio70/direction
    echo 0 >/sys/class/gpio/gpio70/value
    echo 73 >/sys/class/gpio/export
    echo high >/sys/class/gpio/gpio73/direction
    echo 0 >/sys/class/gpio/gpio73/value
    echo 74 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio74/direction
    echo 75 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio75/direction
    echo 157 >/sys/class/gpio/export
    echo low >/sys/class/gpio/gpio157/direction
    echo 0 >/sys/class/gpio/gpio157/value
    # create symlinks for ofono N900 plugin
    mkdir -p /dev/cmt
    ln -nsf /sys/class/gpio/gpio70 /dev/cmt/cmt_apeslpx
    ln -nsf /sys/class/gpio/gpio74 /dev/cmt/cmt_en
    ln -nsf /sys/class/gpio/gpio73 /dev/cmt/cmt_rst_rq
    ln -nsf /sys/class/gpio/gpio75 /dev/cmt/cmt_rst
    ln -nsf /sys/class/gpio/gpio157 /dev/cmt/cmt_bsi

-- 
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141105/c8bb2e8d/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Maybe you need to enable modem?
> 
> This is n900 init sequence from script: nokia-n900-configs.sh

>From the dts, it looks like this should somehow work without this.

I can try but.. is it safe? I'm using DT-based config, and interrupt
numbers definitely changed. If GPIO numbers changed, it will not be
funny.

Thanks,
									Pavel

>     # set up the GPIO's for N900 modem:
>     echo 70 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio70/direction
>     echo 0 >/sys/class/gpio/gpio70/value
>     echo 73 >/sys/class/gpio/export
>     echo high >/sys/class/gpio/gpio73/direction
>     echo 0 >/sys/class/gpio/gpio73/value
>     echo 74 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio74/direction
>     echo 75 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio75/direction
>     echo 157 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio157/direction
>     echo 0 >/sys/class/gpio/gpio157/value
>     # create symlinks for ofono N900 plugin
>     mkdir -p /dev/cmt
>     ln -nsf /sys/class/gpio/gpio70 /dev/cmt/cmt_apeslpx
>     ln -nsf /sys/class/gpio/gpio74 /dev/cmt/cmt_en
>     ln -nsf /sys/class/gpio/gpio73 /dev/cmt/cmt_rst_rq
>     ln -nsf /sys/class/gpio/gpio75 /dev/cmt/cmt_rst
>     ln -nsf /sys/class/gpio/gpio157 /dev/cmt/cmt_bsi
> 



-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Maybe you need to enable modem?
> 
> This is n900 init sequence from script: nokia-n900-configs.sh

>From the dts, it looks like this should somehow work without this.

I can try but.. is it safe? I'm using DT-based config, and interrupt
numbers definitely changed. If GPIO numbers changed, it will not be
funny.

Thanks,
									Pavel

>     # set up the GPIO's for N900 modem:
>     echo 70 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio70/direction
>     echo 0 >/sys/class/gpio/gpio70/value
>     echo 73 >/sys/class/gpio/export
>     echo high >/sys/class/gpio/gpio73/direction
>     echo 0 >/sys/class/gpio/gpio73/value
>     echo 74 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio74/direction
>     echo 75 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio75/direction
>     echo 157 >/sys/class/gpio/export
>     echo low >/sys/class/gpio/gpio157/direction
>     echo 0 >/sys/class/gpio/gpio157/value
>     # create symlinks for ofono N900 plugin
>     mkdir -p /dev/cmt
>     ln -nsf /sys/class/gpio/gpio70 /dev/cmt/cmt_apeslpx
>     ln -nsf /sys/class/gpio/gpio74 /dev/cmt/cmt_en
>     ln -nsf /sys/class/gpio/gpio73 /dev/cmt/cmt_rst_rq
>     ln -nsf /sys/class/gpio/gpio75 /dev/cmt/cmt_rst
>     ln -nsf /sys/class/gpio/gpio157 /dev/cmt/cmt_bsi
> 



-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 590 bytes --]

Hi,

On Wed, Nov 05, 2014 at 11:03:59PM +0100, Pavel Machek wrote:
> > Maybe you need to enable modem?
> > 
> > This is n900 init sequence from script: nokia-n900-configs.sh
> 
> From the dts, it looks like this should somehow work without this.

Right :) The n900-modem driver will take care of this if the "pm"
parameter is set to 1 (which should be the default).

> I can try but.. is it safe? I'm using DT-based config, and interrupt
> numbers definitely changed. If GPIO numbers changed, it will not be
> funny.

Can you provide the output from dmesg?

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

N900 modem support in 3.18-rc1

[Sebastian Reichel]

Hi,

On Wed, Nov 05, 2014 at 11:03:59PM +0100, Pavel Machek wrote:
> > Maybe you need to enable modem?
> > 
> > This is n900 init sequence from script: nokia-n900-configs.sh
> 
> From the dts, it looks like this should somehow work without this.

Right :) The n900-modem driver will take care of this if the "pm"
parameter is set to 1 (which should be the default).

> I can try but.. is it safe? I'm using DT-based config, and interrupt
> numbers definitely changed. If GPIO numbers changed, it will not be
> funny.

Can you provide the output from dmesg?

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141106/fb830555/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> On Wed, Nov 05, 2014 at 11:03:59PM +0100, Pavel Machek wrote:
> > > Maybe you need to enable modem?
> > > 
> > > This is n900 init sequence from script: nokia-n900-configs.sh
> > 
> > From the dts, it looks like this should somehow work without this.
> 
> Right :) The n900-modem driver will take care of this if the "pm"
> parameter is set to 1 (which should be the default).

I actually had pm=0 on the command line, but I removed it now, and no
change:

root@n900:~# find /sys/bus/hsi/devices/n900-modem/
/sys/bus/hsi/devices/n900-modem/
/sys/bus/hsi/devices/n900-modem/power
/sys/bus/hsi/devices/n900-modem/power/control
/sys/bus/hsi/devices/n900-modem/power/runtime_active_time
/sys/bus/hsi/devices/n900-modem/power/autosuspend_delay_ms
/sys/bus/hsi/devices/n900-modem/power/runtime_status
/sys/bus/hsi/devices/n900-modem/power/runtime_suspended_time
/sys/bus/hsi/devices/n900-modem/modalias
/sys/bus/hsi/devices/n900-modem/driver
/sys/bus/hsi/devices/n900-modem/subsystem
/sys/bus/hsi/devices/n900-modem/uevent
root@n900:~# cat /proc/cmdline 
root=/dev/nfs nfsroot=192.168.1.6:/srv/nfs/n900 rw
ip=192.168.1.8::192.168.1.6:255.255.255.192::usb0:  no-omap-wd
no-ext-wd console=tty0
root@n900:~# 

Let me try with explicit =1. .. aha, that helps. Thanks!

Do you have an example client that can talk to ofonod?

What is needed to get voice calls to work?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> On Wed, Nov 05, 2014 at 11:03:59PM +0100, Pavel Machek wrote:
> > > Maybe you need to enable modem?
> > > 
> > > This is n900 init sequence from script: nokia-n900-configs.sh
> > 
> > From the dts, it looks like this should somehow work without this.
> 
> Right :) The n900-modem driver will take care of this if the "pm"
> parameter is set to 1 (which should be the default).

I actually had pm=0 on the command line, but I removed it now, and no
change:

root at n900:~# find /sys/bus/hsi/devices/n900-modem/
/sys/bus/hsi/devices/n900-modem/
/sys/bus/hsi/devices/n900-modem/power
/sys/bus/hsi/devices/n900-modem/power/control
/sys/bus/hsi/devices/n900-modem/power/runtime_active_time
/sys/bus/hsi/devices/n900-modem/power/autosuspend_delay_ms
/sys/bus/hsi/devices/n900-modem/power/runtime_status
/sys/bus/hsi/devices/n900-modem/power/runtime_suspended_time
/sys/bus/hsi/devices/n900-modem/modalias
/sys/bus/hsi/devices/n900-modem/driver
/sys/bus/hsi/devices/n900-modem/subsystem
/sys/bus/hsi/devices/n900-modem/uevent
root at n900:~# cat /proc/cmdline 
root=/dev/nfs nfsroot=192.168.1.6:/srv/nfs/n900 rw
ip=192.168.1.8::192.168.1.6:255.255.255.192::usb0:  no-omap-wd
no-ext-wd console=tty0
root at n900:~# 

Let me try with explicit =1. .. aha, that helps. Thanks!

Do you have an example client that can talk to ofonod?

What is needed to get voice calls to work?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1483 bytes --]

Hi,

On Thu, Nov 06, 2014 at 01:47:11PM +0100, Pavel Machek wrote:
> > On Wed, Nov 05, 2014 at 11:03:59PM +0100, Pavel Machek wrote:
> > > > Maybe you need to enable modem?
> > > > 
> > > > This is n900 init sequence from script: nokia-n900-configs.sh
> > > 
> > > From the dts, it looks like this should somehow work without this.
> > 
> > Right :) The n900-modem driver will take care of this if the "pm"
> > parameter is set to 1 (which should be the default).
> 
> I actually had pm=0 on the command line, but I removed it now, and no
> change: [...]
> 
> Let me try with explicit =1. .. aha, that helps. Thanks!

mh seems I actually missed to make 1 the default value. I will
prepare a patch for that.

I assume, that the example ofono commands work for you now?

> Do you have an example client that can talk to ofonod?

I have not yet played with userland stuff. You could try
telepathy-ring, which integrates the ofono into the telepathy
framework.

> What is needed to get voice calls to work?

There's still a kernel driver missing in mainline for exchanging
voice data between the modem and the cpu (called cmt-speech).

BTW the CMT driver should be removed from your kernel tree; its a
deprecated variant of mainline's nokia-modem driver. Thus I guess
the cmt-speech driver, which is available in your kernel tree, is
not properly integrated into the changes I did during mainlining
the other modem related drivers.

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

N900 modem support in 3.18-rc1

[Sebastian Reichel]

Hi,

On Thu, Nov 06, 2014 at 01:47:11PM +0100, Pavel Machek wrote:
> > On Wed, Nov 05, 2014 at 11:03:59PM +0100, Pavel Machek wrote:
> > > > Maybe you need to enable modem?
> > > > 
> > > > This is n900 init sequence from script: nokia-n900-configs.sh
> > > 
> > > From the dts, it looks like this should somehow work without this.
> > 
> > Right :) The n900-modem driver will take care of this if the "pm"
> > parameter is set to 1 (which should be the default).
> 
> I actually had pm=0 on the command line, but I removed it now, and no
> change: [...]
> 
> Let me try with explicit =1. .. aha, that helps. Thanks!

mh seems I actually missed to make 1 the default value. I will
prepare a patch for that.

I assume, that the example ofono commands work for you now?

> Do you have an example client that can talk to ofonod?

I have not yet played with userland stuff. You could try
telepathy-ring, which integrates the ofono into the telepathy
framework.

> What is needed to get voice calls to work?

There's still a kernel driver missing in mainline for exchanging
voice data between the modem and the cpu (called cmt-speech).

BTW the CMT driver should be removed from your kernel tree; its a
deprecated variant of mainline's nokia-modem driver. Thus I guess
the cmt-speech driver, which is available in your kernel tree, is
not properly integrated into the changes I did during mainlining
the other modem related drivers.

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141106/5aa320d1/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> > I actually had pm=0 on the command line, but I removed it now, and no
> > change: [...]
> > 
> > Let me try with explicit =1. .. aha, that helps. Thanks!
> 
> mh seems I actually missed to make 1 the default value. I will
> prepare a patch for that.
> 
> I assume, that the example ofono commands work for you now?

Yes. I was able to get list of networks. It stops working after a
while, for unknown reasons.

BTW... I'm using Debian-7.7 and did

XKBMODEL="nokiarx51"
XKBLAYOUT="us"

(from https://wiki.debian.org/MaemoAndSqueeze). Keyboard works well
-- except "p" key. arrow-P (0) works ok. Do you see that, too?

> > Do you have an example client that can talk to ofonod?
> 
> I have not yet played with userland stuff. You could try
> telepathy-ring, which integrates the ofono into the telepathy
> framework.

Thanks for the pointer.

> > What is needed to get voice calls to work?
> 
> There's still a kernel driver missing in mainline for exchanging
> voice data between the modem and the cpu (called cmt-speech).
> 
> BTW the CMT driver should be removed from your kernel tree; its a
> deprecated variant of mainline's nokia-modem driver. Thus I guess
> the cmt-speech driver, which is available in your kernel tree, is
> not properly integrated into the changes I did during mainlining
> the other modem related drivers.

Aha, so CONFIG_CMT is the same thing as CONFIG_NOKIA_NODEM? Ok, will
disable that. Speech... if you'd have version I could test, I'll
happily do that.

Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> > I actually had pm=0 on the command line, but I removed it now, and no
> > change: [...]
> > 
> > Let me try with explicit =1. .. aha, that helps. Thanks!
> 
> mh seems I actually missed to make 1 the default value. I will
> prepare a patch for that.
> 
> I assume, that the example ofono commands work for you now?

Yes. I was able to get list of networks. It stops working after a
while, for unknown reasons.

BTW... I'm using Debian-7.7 and did

XKBMODEL="nokiarx51"
XKBLAYOUT="us"

(from https://wiki.debian.org/MaemoAndSqueeze). Keyboard works well
-- except "p" key. arrow-P (0) works ok. Do you see that, too?

> > Do you have an example client that can talk to ofonod?
> 
> I have not yet played with userland stuff. You could try
> telepathy-ring, which integrates the ofono into the telepathy
> framework.

Thanks for the pointer.

> > What is needed to get voice calls to work?
> 
> There's still a kernel driver missing in mainline for exchanging
> voice data between the modem and the cpu (called cmt-speech).
> 
> BTW the CMT driver should be removed from your kernel tree; its a
> deprecated variant of mainline's nokia-modem driver. Thus I guess
> the cmt-speech driver, which is available in your kernel tree, is
> not properly integrated into the changes I did during mainlining
> the other modem related drivers.

Aha, so CONFIG_CMT is the same thing as CONFIG_NOKIA_NODEM? Ok, will
disable that. Speech... if you'd have version I could test, I'll
happily do that.

Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Pali Rohár]

[-- Attachment #1: Type: Text/Plain, Size: 1130 bytes --]

On Thursday 06 November 2014 23:50:05 Pavel Machek wrote:
> > > What is needed to get voice calls to work?
> > 
> > There's still a kernel driver missing in mainline for
> > exchanging voice data between the modem and the cpu (called
> > cmt-speech).
> > 
> > BTW the CMT driver should be removed from your kernel tree;
> > its a deprecated variant of mainline's nokia-modem driver.
> > Thus I guess the cmt-speech driver, which is available in
> > your kernel tree, is not properly integrated into the
> > changes I did during mainlining the other modem related
> > drivers.
> 
> Aha, so CONFIG_CMT is the same thing as CONFIG_NOKIA_NODEM?
> Ok, will disable that. Speech... if you'd have version I
> could test, I'll happily do that.
> 
> Thanks,
> 									Pavel

For voice calls you need:
* kernel driver cmt-speech (or it has some new name)
* cmt-speech userspace library (communication with kernel)
* pulseaudio modules which are using that library

Freemangordon (Ivaylo Dimitrov, CCed) should know more about it, 
specially about pulseaudio modules...

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

N900 modem support in 3.18-rc1

[Pali Rohár]

On Thursday 06 November 2014 23:50:05 Pavel Machek wrote:
> > > What is needed to get voice calls to work?
> > 
> > There's still a kernel driver missing in mainline for
> > exchanging voice data between the modem and the cpu (called
> > cmt-speech).
> > 
> > BTW the CMT driver should be removed from your kernel tree;
> > its a deprecated variant of mainline's nokia-modem driver.
> > Thus I guess the cmt-speech driver, which is available in
> > your kernel tree, is not properly integrated into the
> > changes I did during mainlining the other modem related
> > drivers.
> 
> Aha, so CONFIG_CMT is the same thing as CONFIG_NOKIA_NODEM?
> Ok, will disable that. Speech... if you'd have version I
> could test, I'll happily do that.
> 
> Thanks,
> 									Pavel

For voice calls you need:
* kernel driver cmt-speech (or it has some new name)
* cmt-speech userspace library (communication with kernel)
* pulseaudio modules which are using that library

Freemangordon (Ivaylo Dimitrov, CCed) should know more about it, 
specially about pulseaudio modules...

-- 
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141107/db30e4f5/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Ivaylo Dimitrov]

On  7.11.2014 01:01, Pali Rohár wrote:

>
> For voice calls you need:
> * kernel driver cmt-speech (or it has some new name)
> * cmt-speech userspace library (communication with kernel)
> * pulseaudio modules which are using that library
>
> Freemangordon (Ivaylo Dimitrov, CCed) should know more about it,
> specially about pulseaudio modules...
>

I have a patch for cmt-speech on top of nokia-modem driver living 
somewhere on my HDD, but I guess it is better Sebastian to make such a 
patch (Sebastian, no?).

About the pulseaudio stuff - we're still in process of REing it, so far 
there are 2 out of 3 closed Nokia modules ready 
(https://gitorious.org/pulseaudio-nokia), but the last one, which is the 
one used for voice calls is still not ready and will take it a while :).

Regards,
Ivo

N900 modem support in 3.18-rc1

[Ivaylo Dimitrov]

On  7.11.2014 01:01, Pali Roh?r wrote:

>
> For voice calls you need:
> * kernel driver cmt-speech (or it has some new name)
> * cmt-speech userspace library (communication with kernel)
> * pulseaudio modules which are using that library
>
> Freemangordon (Ivaylo Dimitrov, CCed) should know more about it,
> specially about pulseaudio modules...
>

I have a patch for cmt-speech on top of nokia-modem driver living 
somewhere on my HDD, but I guess it is better Sebastian to make such a 
patch (Sebastian, no?).

About the pulseaudio stuff - we're still in process of REing it, so far 
there are 2 out of 3 closed Nokia modules ready 
(https://gitorious.org/pulseaudio-nokia), but the last one, which is the 
one used for voice calls is still not ready and will take it a while :).

Regards,
Ivo

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> > I actually had pm=0 on the command line, but I removed it now, and no
> > change: [...]
> > 
> > Let me try with explicit =1. .. aha, that helps. Thanks!
> 
> mh seems I actually missed to make 1 the default value. I will
> prepare a patch for that.
> 
> I assume, that the example ofono commands work for you now?

Yes, it now works great.

> > Do you have an example client that can talk to ofonod?
> 
> I have not yet played with userland stuff. You could try
> telepathy-ring, which integrates the ofono into the telepathy
> framework.

Ok, I took a look, and telepathy-ring is not in debian, and has
a lot of dependencies.

OTOH ofono seems pretty reasonable. So I played a bit, and result
is python/pygtk gui which can receive an sms, initiate a call, and
report missed call. If someone wants to play, source is at

https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone

Best regards,
									Pavel



-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> > I actually had pm=0 on the command line, but I removed it now, and no
> > change: [...]
> > 
> > Let me try with explicit =1. .. aha, that helps. Thanks!
> 
> mh seems I actually missed to make 1 the default value. I will
> prepare a patch for that.
> 
> I assume, that the example ofono commands work for you now?

Yes, it now works great.

> > Do you have an example client that can talk to ofonod?
> 
> I have not yet played with userland stuff. You could try
> telepathy-ring, which integrates the ofono into the telepathy
> framework.

Ok, I took a look, and telepathy-ring is not in debian, and has
a lot of dependencies.

OTOH ofono seems pretty reasonable. So I played a bit, and result
is python/pygtk gui which can receive an sms, initiate a call, and
report missed call. If someone wants to play, source is at

https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone

Best regards,
									Pavel



-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

On Fri 2014-11-07 09:04:52, Ivaylo Dimitrov wrote:
> On  7.11.2014 01:01, Pali Rohár wrote:
> >
> >For voice calls you need:
> >* kernel driver cmt-speech (or it has some new name)
> >* cmt-speech userspace library (communication with kernel)
> >* pulseaudio modules which are using that library
> >
> >Freemangordon (Ivaylo Dimitrov, CCed) should know more about it,
> >specially about pulseaudio modules...
> 
> I have a patch for cmt-speech on top of nokia-modem driver living
> somewhere on my HDD, but I guess it is better Sebastian to make such
> a patch (Sebastian, no?).

Sebastian is quiet, can we have the patch? :-).

> About the pulseaudio stuff - we're still in process of REing it, so
> far there are 2 out of 3 closed Nokia modules ready
> (https://gitorious.org/pulseaudio-nokia), but the last one, which is
> the one used for voice calls is still not ready and will take it a
> while :).

Ok, is there a way I could help? Pretty much everything else works with
opensource drivers...

Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

On Fri 2014-11-07 09:04:52, Ivaylo Dimitrov wrote:
> On  7.11.2014 01:01, Pali Roh?r wrote:
> >
> >For voice calls you need:
> >* kernel driver cmt-speech (or it has some new name)
> >* cmt-speech userspace library (communication with kernel)
> >* pulseaudio modules which are using that library
> >
> >Freemangordon (Ivaylo Dimitrov, CCed) should know more about it,
> >specially about pulseaudio modules...
> 
> I have a patch for cmt-speech on top of nokia-modem driver living
> somewhere on my HDD, but I guess it is better Sebastian to make such
> a patch (Sebastian, no?).

Sebastian is quiet, can we have the patch? :-).

> About the pulseaudio stuff - we're still in process of REing it, so
> far there are 2 out of 3 closed Nokia modules ready
> (https://gitorious.org/pulseaudio-nokia), but the last one, which is
> the one used for voice calls is still not ready and will take it a
> while :).

Ok, is there a way I could help? Pretty much everything else works with
opensource drivers...

Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Tony Lindgren]

* Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> Hi!
> 
> > > I actually had pm=0 on the command line, but I removed it now, and no
> > > change: [...]
> > > 
> > > Let me try with explicit =1. .. aha, that helps. Thanks!
> > 
> > mh seems I actually missed to make 1 the default value. I will
> > prepare a patch for that.
> > 
> > I assume, that the example ofono commands work for you now?
> 
> Yes, it now works great.
> 
> > > Do you have an example client that can talk to ofonod?
> > 
> > I have not yet played with userland stuff. You could try
> > telepathy-ring, which integrates the ofono into the telepathy
> > framework.
> 
> Ok, I took a look, and telepathy-ring is not in debian, and has
> a lot of dependencies.
> 
> OTOH ofono seems pretty reasonable. So I played a bit, and result
> is python/pygtk gui which can receive an sms, initiate a call, and
> report missed call. If someone wants to play, source is at
> 
> https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone

Pavel, care to fill in the the following type patch with some
instructions in the description now that you got it working?

I did not have luck yet when I tried. I got the /dev/cmt/*
entries after adding pm=1 param, but no luck scanning any networks.

Regards,

Tony

8< -----------------
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules

--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -88,6 +88,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
+CONFIG_PHONET=m
 CONFIG_CAN=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
@@ -158,6 +159,7 @@ CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
+CONFIG_USB_CDC_PHONET=m
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_SDIO=m
@@ -197,6 +199,11 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
+CONFIG_HSI=m
+CONFIG_OMAP_SSI=m
+CONFIG_NOKIA_MODEM=m
+CONFIG_SSI_PROTOCOL=m
+CONFIG_HSI_CHAR=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
@@ -312,9 +319,11 @@ CONFIG_USB_CONFIGFS_ECM=y
 CONFIG_USB_CONFIGFS_ECM_SUBSET=y
 CONFIG_USB_CONFIGFS_RNDIS=y
 CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_PHONET=y
 CONFIG_USB_CONFIGFS_MASS_STORAGE=y
 CONFIG_USB_CONFIGFS_F_LB_SS=y
 CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_G_NOKIA=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=y
 CONFIG_MMC_OMAP=y
@@ -359,6 +368,7 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y

N900 modem support in 3.18-rc1

[Tony Lindgren]

* Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> Hi!
> 
> > > I actually had pm=0 on the command line, but I removed it now, and no
> > > change: [...]
> > > 
> > > Let me try with explicit =1. .. aha, that helps. Thanks!
> > 
> > mh seems I actually missed to make 1 the default value. I will
> > prepare a patch for that.
> > 
> > I assume, that the example ofono commands work for you now?
> 
> Yes, it now works great.
> 
> > > Do you have an example client that can talk to ofonod?
> > 
> > I have not yet played with userland stuff. You could try
> > telepathy-ring, which integrates the ofono into the telepathy
> > framework.
> 
> Ok, I took a look, and telepathy-ring is not in debian, and has
> a lot of dependencies.
> 
> OTOH ofono seems pretty reasonable. So I played a bit, and result
> is python/pygtk gui which can receive an sms, initiate a call, and
> report missed call. If someone wants to play, source is at
> 
> https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone

Pavel, care to fill in the the following type patch with some
instructions in the description now that you got it working?

I did not have luck yet when I tried. I got the /dev/cmt/*
entries after adding pm=1 param, but no luck scanning any networks.

Regards,

Tony

8< -----------------
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules

--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -88,6 +88,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
+CONFIG_PHONET=m
 CONFIG_CAN=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
@@ -158,6 +159,7 @@ CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
+CONFIG_USB_CDC_PHONET=m
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_USB=m
 CONFIG_LIBERTAS_SDIO=m
@@ -197,6 +199,11 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
 CONFIG_SPI_OMAP24XX=y
+CONFIG_HSI=m
+CONFIG_OMAP_SSI=m
+CONFIG_NOKIA_MODEM=m
+CONFIG_SSI_PROTOCOL=m
+CONFIG_HSI_CHAR=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
@@ -312,9 +319,11 @@ CONFIG_USB_CONFIGFS_ECM=y
 CONFIG_USB_CONFIGFS_ECM_SUBSET=y
 CONFIG_USB_CONFIGFS_RNDIS=y
 CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_PHONET=y
 CONFIG_USB_CONFIGFS_MASS_STORAGE=y
 CONFIG_USB_CONFIGFS_F_LB_SS=y
 CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_G_NOKIA=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=y
 CONFIG_MMC_OMAP=y
@@ -359,6 +368,7 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y

Re: N900 modem support in 3.18-rc1

[Aaro Koskinen]

Hi,

On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
> * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> > OTOH ofono seems pretty reasonable. So I played a bit, and result
> > is python/pygtk gui which can receive an sms, initiate a call, and
> > report missed call. If someone wants to play, source is at
> > 
> > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> 
> Pavel, care to fill in the the following type patch with some
> instructions in the description now that you got it working?

Could we even have some "permanent" instructions under Documentation/?

> I did not have luck yet when I tried. I got the /dev/cmt/*
> entries after adding pm=1 param, but no luck scanning any networks.

I haven't tested anything yet, but looking forward to do that during
the weekend... Sounds pretty exciting. :-)

A.

N900 modem support in 3.18-rc1

[Aaro Koskinen]

Hi,

On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
> * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> > OTOH ofono seems pretty reasonable. So I played a bit, and result
> > is python/pygtk gui which can receive an sms, initiate a call, and
> > report missed call. If someone wants to play, source is at
> > 
> > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> 
> Pavel, care to fill in the the following type patch with some
> instructions in the description now that you got it working?

Could we even have some "permanent" instructions under Documentation/?

> I did not have luck yet when I tried. I got the /dev/cmt/*
> entries after adding pm=1 param, but no luck scanning any networks.

I haven't tested anything yet, but looking forward to do that during
the weekend... Sounds pretty exciting. :-)

A.

Re: N900 modem support in 3.18-rc1

[Ivaylo Dimitrov]

On 13.11.2014 18:24, Pavel Machek wrote:
> On Fri 2014-11-07 09:04:52, Ivaylo Dimitrov wrote:
>
> Sebastian is quiet, can we have the patch? :-).

Sure, why not :)

https://gitorious.org/linux-n900/freemangordons-linux-n900/commits/30e9a5c498a89cea4c29523f69e436bf0af3c631

commits 89ce13b, b81d80d, ec4d0dc, 91256e2 and 8022a6d - e29f558 (no 
idea why gitorious shows those mixed with SGX stuff, on my local tree it 
is contiguous patch series)

didn't test against the current upstream, but I see no reason why those 
should not apply, build and run.

>
>> About the pulseaudio stuff - we're still in process of REing it, so
>> far there are 2 out of 3 closed Nokia modules ready
>> (https://gitorious.org/pulseaudio-nokia), but the last one, which is
>> the one used for voice calls is still not ready and will take it a
>> while :).
>
> Ok, is there a way I could help? Pretty much everything else works with
> opensource drivers...
>

There is, though I am not sure you'll like it much - fire up IDA and 
join the party :P. Ping me on IRC for more details in case you're 
interested.

Regards,
Ivo

N900 modem support in 3.18-rc1

[Ivaylo Dimitrov]

On 13.11.2014 18:24, Pavel Machek wrote:
> On Fri 2014-11-07 09:04:52, Ivaylo Dimitrov wrote:
>
> Sebastian is quiet, can we have the patch? :-).

Sure, why not :)

https://gitorious.org/linux-n900/freemangordons-linux-n900/commits/30e9a5c498a89cea4c29523f69e436bf0af3c631

commits 89ce13b, b81d80d, ec4d0dc, 91256e2 and 8022a6d - e29f558 (no 
idea why gitorious shows those mixed with SGX stuff, on my local tree it 
is contiguous patch series)

didn't test against the current upstream, but I see no reason why those 
should not apply, build and run.

>
>> About the pulseaudio stuff - we're still in process of REing it, so
>> far there are 2 out of 3 closed Nokia modules ready
>> (https://gitorious.org/pulseaudio-nokia), but the last one, which is
>> the one used for voice calls is still not ready and will take it a
>> while :).
>
> Ok, is there a way I could help? Pretty much everything else works with
> opensource drivers...
>

There is, though I am not sure you'll like it much - fire up IDA and 
join the party :P. Ping me on IRC for more details in case you're 
interested.

Regards,
Ivo

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1663 bytes --]

Hi!

> > > > Do you have an example client that can talk to ofonod?
> > > 
> > > I have not yet played with userland stuff. You could try
> > > telepathy-ring, which integrates the ofono into the telepathy
> > > framework.
> > 
> > Ok, I took a look, and telepathy-ring is not in debian, and has
> > a lot of dependencies.
> > 
> > OTOH ofono seems pretty reasonable. So I played a bit, and result
> > is python/pygtk gui which can receive an sms, initiate a call, and
> > report missed call. If someone wants to play, source is at
> > 
> > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> 
> Pavel, care to fill in the the following type patch with some
> instructions in the description now that you got it working?
> 
> I did not have luck yet when I tried. I got the /dev/cmt/*
> entries after adding pm=1 param, but no luck scanning any networks.

I'm using nfsroot (no modules), .config is attached. Debian v7.7,
ofono installed.

To launch ofono, I'm using:

rmdir /dev/cmt
ln -s /sys/bus/hsi/devices/n900-modem/ /dev/cmt
killall  ofonod
sleep .1
ofonod --nodetach --debug &

# enable the modem
mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Powered true
# enable modem's RF parts
mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Online true
# scan for available networks (takes some time)
mdbus2 -s org.ofono /n900_0 org.ofono.NetworkRegistration.Scan

I do have working SIM card in it. (Alternatively, ofone button
"online" can be used).

Good luck,
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 85910 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.18.0-rc1 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-omap3"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_OMAP=y

#
# TI OMAP Common Features
#

#
# OMAP Feature Selections
#
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_GPIO_SWITCH is not set
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y

#
# TI OMAP/AM/DM/DRA Family
#
CONFIG_ARCH_OMAP3=y
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
CONFIG_ARCH_OMAP2PLUS=y

#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_OMAP3430=y
# CONFIG_SOC_TI81XX is not set

#
# OMAP Legacy Platform Data Board Type
#
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_DEVKIT8000 is not set
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OMAP3530_LV_SOM is not set
# CONFIG_MACH_OMAP3_TORPEDO is not set
# CONFIG_MACH_OVERO is not set
# CONFIG_MACH_OMAP3517EVM is not set
# CONFIG_MACH_CRANEBOARD is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
# CONFIG_MACH_TOUCHBOOK is not set
# CONFIG_MACH_OMAP_3430SDP is not set
# CONFIG_MACH_NOKIA_RX51 is not set
# CONFIG_MACH_CM_T35 is not set
# CONFIG_MACH_CM_T3517 is not set
# CONFIG_MACH_SBC3530 is not set
# CONFIG_OMAP3_EMU is not set
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_PL310=y
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_773022 is not set
CONFIG_TI_PRIV_EDMA=y

#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
# CONFIG_SMP is not set
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set

#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttyO2,115200 console=tty"
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_MINSTREL_HT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_DISABLE_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
# CONFIG_ARM_CCN is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
# CONFIG_MTD_NAND_OMAP_BCH is not set
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_LPDDR2_NVM is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MTD=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
# CONFIG_CMT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NLMON is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
# CONFIG_EMAC_ROCKCHIP is not set
CONFIG_NET_CADENCE=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_SYSTEMPORT is not set
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0 is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_AX88796 is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000 is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_DAVINCI_EMAC is not set
# CONFIG_TI_DAVINCI_MDIO is not set
# CONFIG_TI_DAVINCI_CPDMA is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_LIBERTAS is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CU is not set
CONFIG_WL_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
# CONFIG_WL1251_SDIO is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
# CONFIG_CW1200 is not set
# CONFIG_RSI_91X is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP1106 is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_OF_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2005=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_OMAP=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#
CONFIG_OMAP_SSI=y
CONFIG_OMAP_SSI_PORT=y

#
# HSI clients
#
CONFIG_NOKIA_MODEM=y
CONFIG_SSI_PROTOCOL=y
CONFIG_HSI_CHAR=y
CONFIG_HSI_CMT_SPEECH=y

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_ZEVIO is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_BQ27X00_I2C=y
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_ISP1704=y
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TWL4030=y
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
# CONFIG_IR_LIRC_CODEC is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
CONFIG_IR_SHARP_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_IR_RX51=y
# CONFIG_IR_IMG is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_OMAP2_VOUT is not set
CONFIG_VIDEO_OMAP3=y
# CONFIG_VIDEO_OMAP3_DEBUG is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_MEDIA_ATTACH=y
# CONFIG_VIDEO_IR_I2C is not set

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
CONFIG_VIDEO_AD5820=y
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_SMIAREGS=y
CONFIG_VIDEO_ET8EK8=y
# CONFIG_VIDEO_SMIAPP is not set
# CONFIG_VIDEO_S5C73M3 is not set

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
# CONFIG_VIDEO_AS3645A is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Customise DVB Frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#

#
# Direct Rendering Manager
#
# CONFIG_DRM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS_INIT=y
CONFIG_OMAP2_DSS=y
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
# CONFIG_OMAP2_DSS_DPI is not set
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP2_DSS_HDMI_COMMON=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP4_DSS_HDMI_AUDIO=y
# CONFIG_OMAP5_DSS_HDMI is not set
CONFIG_OMAP2_DSS_SDI=y
# CONFIG_OMAP2_DSS_DSI is not set
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_FB_OMAP2=y
# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
CONFIG_FB_OMAP2_NUM_FBS=3

#
# OMAP Display Device Drivers (new device model)
#
# CONFIG_DISPLAY_ENCODER_TFP410 is not set
# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
# CONFIG_DISPLAY_CONNECTOR_DVI is not set
# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
# CONFIG_DISPLAY_PANEL_DPI is not set
# CONFIG_DISPLAY_PANEL_DSI_CM is not set
CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=y
# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_PVR is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set

#
# HD-Audio
#
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DAVINCI_SOC_MCASP is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
CONFIG_SND_OMAP_SOC_HDMI=y
CONFIG_SND_OMAP_SOC_RX51=y
# CONFIG_SND_OMAP_SOC_OMAP_TWL4030 is not set
CONFIG_SND_OMAP_SOC_OMAP_HDMI=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271 is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_HDMI_CODEC=y
# CONFIG_SND_SOC_ES8328 is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1792A is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
CONFIG_SND_SOC_TLV320AIC3X=y
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8804 is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8978 is not set
CONFIG_SND_SOC_TPA6130A2=y
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set
# CONFIG_USB_MUSB_TUSB6010 is not set
CONFIG_USB_MUSB_OMAP2PLUS=y
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not set
# CONFIG_USB_INVENTRA_DMA is not set
# CONFIG_USB_TI_CPPI41_DMA is not set
CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_SUBSET=y
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_MCP795 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_XGENE is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TI_EDMA is not set
CONFIG_DMA_OMAP=y
# CONFIG_TI_CPPI41 is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_NBPFAXI_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_LINE6_USB is not set
# CONFIG_VT6656 is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_MTD_SPINAND_MT29F is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
CONFIG_BT_NOKIA_H4P=m

#
# SOC (System On Chip) specific Drivers
#
CONFIG_SOC_TI=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_QCOM is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_OMAP_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_OMAP_CONTROL_PHY is not set
CONFIG_TWL4030_USB=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_OMAP2UART1 is not set
# CONFIG_DEBUG_OMAP2UART2 is not set
# CONFIG_DEBUG_OMAP2UART3 is not set
CONFIG_DEBUG_OMAP3UART3=y
# CONFIG_DEBUG_OMAP4UART3 is not set
# CONFIG_DEBUG_OMAP3UART4 is not set
# CONFIG_DEBUG_OMAP4UART4 is not set
# CONFIG_DEBUG_TI81XXUART1 is not set
# CONFIG_DEBUG_TI81XXUART2 is not set
# CONFIG_DEBUG_TI81XXUART3 is not set
# CONFIG_DEBUG_AM33XXUART1 is not set
# CONFIG_DEBUG_ZOOM_UART is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
# CONFIG_DEBUG_LL_UART_8250 is not set
# CONFIG_DEBUG_LL_UART_PL01X is not set
CONFIG_DEBUG_OMAP2PLUS_UART=y
CONFIG_DEBUG_LL_INCLUDE="debug/omap2plus.S"
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_BCM63XX is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_EARLY_PRINTK=y
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_CRYPTO_DEV_OMAP_DES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
# CONFIG_VIRTUALIZATION is not set

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> > > > Do you have an example client that can talk to ofonod?
> > > 
> > > I have not yet played with userland stuff. You could try
> > > telepathy-ring, which integrates the ofono into the telepathy
> > > framework.
> > 
> > Ok, I took a look, and telepathy-ring is not in debian, and has
> > a lot of dependencies.
> > 
> > OTOH ofono seems pretty reasonable. So I played a bit, and result
> > is python/pygtk gui which can receive an sms, initiate a call, and
> > report missed call. If someone wants to play, source is at
> > 
> > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> 
> Pavel, care to fill in the the following type patch with some
> instructions in the description now that you got it working?
> 
> I did not have luck yet when I tried. I got the /dev/cmt/*
> entries after adding pm=1 param, but no luck scanning any networks.

I'm using nfsroot (no modules), .config is attached. Debian v7.7,
ofono installed.

To launch ofono, I'm using:

rmdir /dev/cmt
ln -s /sys/bus/hsi/devices/n900-modem/ /dev/cmt
killall  ofonod
sleep .1
ofonod --nodetach --debug &

# enable the modem
mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Powered true
# enable modem's RF parts
mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Online true
# scan for available networks (takes some time)
mdbus2 -s org.ofono /n900_0 org.ofono.NetworkRegistration.Scan

I do have working SIM card in it. (Alternatively, ofone button
"online" can be used).

Good luck,
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.18.0-rc1 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-omap3"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_OMAP=y

#
# TI OMAP Common Features
#

#
# OMAP Feature Selections
#
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_GPIO_SWITCH is not set
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y

#
# TI OMAP/AM/DM/DRA Family
#
CONFIG_ARCH_OMAP3=y
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
CONFIG_ARCH_OMAP2PLUS=y

#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_OMAP3430=y
# CONFIG_SOC_TI81XX is not set

#
# OMAP Legacy Platform Data Board Type
#
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_DEVKIT8000 is not set
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OMAP3530_LV_SOM is not set
# CONFIG_MACH_OMAP3_TORPEDO is not set
# CONFIG_MACH_OVERO is not set
# CONFIG_MACH_OMAP3517EVM is not set
# CONFIG_MACH_CRANEBOARD is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
# CONFIG_MACH_TOUCHBOOK is not set
# CONFIG_MACH_OMAP_3430SDP is not set
# CONFIG_MACH_NOKIA_RX51 is not set
# CONFIG_MACH_CM_T35 is not set
# CONFIG_MACH_CM_T3517 is not set
# CONFIG_MACH_SBC3530 is not set
# CONFIG_OMAP3_EMU is not set
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_PL310=y
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_773022 is not set
CONFIG_TI_PRIV_EDMA=y

#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
# CONFIG_SMP is not set
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set

#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttyO2,115200 console=tty"
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_MINSTREL_HT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_DISABLE_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
# CONFIG_ARM_CCN is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
# CONFIG_MTD_NAND_OMAP_BCH is not set
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_LPDDR2_NVM is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MTD=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
# CONFIG_CMT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NLMON is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
# CONFIG_EMAC_ROCKCHIP is not set
CONFIG_NET_CADENCE=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_SYSTEMPORT is not set
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0 is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_AX88796 is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000 is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_DAVINCI_EMAC is not set
# CONFIG_TI_DAVINCI_MDIO is not set
# CONFIG_TI_DAVINCI_CPDMA is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_LIBERTAS is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CU is not set
CONFIG_WL_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
# CONFIG_WL1251_SDIO is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
# CONFIG_CW1200 is not set
# CONFIG_RSI_91X is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP1106 is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_OF_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2005=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_OMAP=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#
CONFIG_OMAP_SSI=y
CONFIG_OMAP_SSI_PORT=y

#
# HSI clients
#
CONFIG_NOKIA_MODEM=y
CONFIG_SSI_PROTOCOL=y
CONFIG_HSI_CHAR=y
CONFIG_HSI_CMT_SPEECH=y

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_ZEVIO is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_BQ27X00_I2C=y
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_ISP1704=y
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TWL4030=y
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
# CONFIG_IR_LIRC_CODEC is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
CONFIG_IR_SHARP_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_IR_RX51=y
# CONFIG_IR_IMG is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_OMAP2_VOUT is not set
CONFIG_VIDEO_OMAP3=y
# CONFIG_VIDEO_OMAP3_DEBUG is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_MEDIA_ATTACH=y
# CONFIG_VIDEO_IR_I2C is not set

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
CONFIG_VIDEO_AD5820=y
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_SMIAREGS=y
CONFIG_VIDEO_ET8EK8=y
# CONFIG_VIDEO_SMIAPP is not set
# CONFIG_VIDEO_S5C73M3 is not set

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
# CONFIG_VIDEO_AS3645A is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m

#
# Customise DVB Frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#

#
# Direct Rendering Manager
#
# CONFIG_DRM is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS_INIT=y
CONFIG_OMAP2_DSS=y
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
# CONFIG_OMAP2_DSS_DPI is not set
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP2_DSS_HDMI_COMMON=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP4_DSS_HDMI_AUDIO=y
# CONFIG_OMAP5_DSS_HDMI is not set
CONFIG_OMAP2_DSS_SDI=y
# CONFIG_OMAP2_DSS_DSI is not set
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_FB_OMAP2=y
# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
CONFIG_FB_OMAP2_NUM_FBS=3

#
# OMAP Display Device Drivers (new device model)
#
# CONFIG_DISPLAY_ENCODER_TFP410 is not set
# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
# CONFIG_DISPLAY_CONNECTOR_DVI is not set
# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
# CONFIG_DISPLAY_PANEL_DPI is not set
# CONFIG_DISPLAY_PANEL_DSI_CM is not set
CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=y
# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_PVR is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set

#
# HD-Audio
#
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DAVINCI_SOC_MCASP is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
CONFIG_SND_OMAP_SOC_HDMI=y
CONFIG_SND_OMAP_SOC_RX51=y
# CONFIG_SND_OMAP_SOC_OMAP_TWL4030 is not set
CONFIG_SND_OMAP_SOC_OMAP_HDMI=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271 is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_HDMI_CODEC=y
# CONFIG_SND_SOC_ES8328 is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1792A is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
CONFIG_SND_SOC_TLV320AIC3X=y
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8804 is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8978 is not set
CONFIG_SND_SOC_TPA6130A2=y
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set
# CONFIG_USB_MUSB_TUSB6010 is not set
CONFIG_USB_MUSB_OMAP2PLUS=y
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not set
# CONFIG_USB_INVENTRA_DMA is not set
# CONFIG_USB_TI_CPPI41_DMA is not set
CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_SUBSET=y
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_MCP795 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_XGENE is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TI_EDMA is not set
CONFIG_DMA_OMAP=y
# CONFIG_TI_CPPI41 is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_NBPFAXI_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_LINE6_USB is not set
# CONFIG_VT6656 is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_MTD_SPINAND_MT29F is not set
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
CONFIG_BT_NOKIA_H4P=m

#
# SOC (System On Chip) specific Drivers
#
CONFIG_SOC_TI=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_QCOM is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_OMAP_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_OMAP_CONTROL_PHY is not set
CONFIG_TWL4030_USB=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_PTDUMP is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_OMAP2UART1 is not set
# CONFIG_DEBUG_OMAP2UART2 is not set
# CONFIG_DEBUG_OMAP2UART3 is not set
CONFIG_DEBUG_OMAP3UART3=y
# CONFIG_DEBUG_OMAP4UART3 is not set
# CONFIG_DEBUG_OMAP3UART4 is not set
# CONFIG_DEBUG_OMAP4UART4 is not set
# CONFIG_DEBUG_TI81XXUART1 is not set
# CONFIG_DEBUG_TI81XXUART2 is not set
# CONFIG_DEBUG_TI81XXUART3 is not set
# CONFIG_DEBUG_AM33XXUART1 is not set
# CONFIG_DEBUG_ZOOM_UART is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
# CONFIG_DEBUG_LL_UART_8250 is not set
# CONFIG_DEBUG_LL_UART_PL01X is not set
CONFIG_DEBUG_OMAP2PLUS_UART=y
CONFIG_DEBUG_LL_INCLUDE="debug/omap2plus.S"
# CONFIG_DEBUG_UART_PL01X is not set
# CONFIG_DEBUG_UART_8250 is not set
# CONFIG_DEBUG_UART_BCM63XX is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_EARLY_PRINTK=y
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_CRYPTO_DEV_OMAP_DES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
# CONFIG_VIRTUALIZATION is not set

Re: N900 modem support in 3.18-rc1

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1056 bytes --]

On Fri, Nov 14, 2014 at 08:37:56AM +0100, Pavel Machek wrote:
> I'm using nfsroot (no modules), .config is attached. Debian v7.7,
> ofono installed.
> 
> To launch ofono, I'm using:
> 
> rmdir /dev/cmt
> ln -s /sys/bus/hsi/devices/n900-modem/ /dev/cmt

At least with Debian as base you can add this to your /etc/rc.local
and be happy, since the link will be created before ofono starts via
/etc/init.d/ ;)

I did not send ofono guys a patch to use
/sys/bus/hsi/devices/n900-modem/, since the kernel is supposed to
handle the PM, so there will be another, simpler interface (I plan
to use pm=2 for that).

> killall  ofonod
> sleep .1
> ofonod --nodetach --debug &

or just use "/etc/init.d/ofono restart". The above is mostly useful
for getting debug output from ofono.

> [...]

The short description for .config: CONFIG_NOKIA_MODEM must not be
disabled. It should depend on everything else needed:

CONFIG_PHONET
CONFIG_HSI
CONFIG_OMAP_SSI
CONFIG_OMAP_SSI_PORT
CONFIG_SSI_PROTOCOL
CONFIG_NOKIA_MODEM


-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

N900 modem support in 3.18-rc1

[Sebastian Reichel]

On Fri, Nov 14, 2014 at 08:37:56AM +0100, Pavel Machek wrote:
> I'm using nfsroot (no modules), .config is attached. Debian v7.7,
> ofono installed.
> 
> To launch ofono, I'm using:
> 
> rmdir /dev/cmt
> ln -s /sys/bus/hsi/devices/n900-modem/ /dev/cmt

At least with Debian as base you can add this to your /etc/rc.local
and be happy, since the link will be created before ofono starts via
/etc/init.d/ ;)

I did not send ofono guys a patch to use
/sys/bus/hsi/devices/n900-modem/, since the kernel is supposed to
handle the PM, so there will be another, simpler interface (I plan
to use pm=2 for that).

> killall  ofonod
> sleep .1
> ofonod --nodetach --debug &

or just use "/etc/init.d/ofono restart". The above is mostly useful
for getting debug output from ofono.

> [...]

The short description for .config: CONFIG_NOKIA_MODEM must not be
disabled. It should depend on everything else needed:

CONFIG_PHONET
CONFIG_HSI
CONFIG_OMAP_SSI
CONFIG_OMAP_SSI_PORT
CONFIG_SSI_PROTOCOL
CONFIG_NOKIA_MODEM


-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141114/9e8497dc/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1474 bytes --]

Hi,

On Fri, Nov 14, 2014 at 09:04:23AM +0200, Ivaylo Dimitrov wrote:
> [...]
> https://gitorious.org/linux-n900/freemangordons-linux-n900/commits/30e9a5c498a89cea4c29523f69e436bf0af3c631
> 
> commits 89ce13b, b81d80d, ec4d0dc, 91256e2 and 8022a6d - e29f558 (no idea
> why gitorious shows those mixed with SGX stuff, on my local tree it is
> contiguous patch series)
> 
> didn't test against the current upstream, but I see no reason why those
> should not apply, build and run.

The patch looks ok. It does not cleanup the cmt-speech driver for
mainline usage, but it should work. Before adding this driver to the
mainline kernel there should be open source userspace support anyway.

Btw. I am aware that this would break existing pulse audio stuff,
but wouldn't it make sense to export a V4L2 device instead of the
custom /dev/cmt_speech ABI?

> > >About the pulseaudio stuff - we're still in process of REing it, so
> > >far there are 2 out of 3 closed Nokia modules ready
> > >(https://gitorious.org/pulseaudio-nokia), but the last one, which is
> > >the one used for voice calls is still not ready and will take it a
> > >while :).
> >
> > Ok, is there a way I could help? Pretty much everything else works with
> > opensource drivers...
> >
> 
> There is, though I am not sure you'll like it much - fire up IDA and join
> the party :P. Ping me on IRC for more details in case you're interested.
> 
> Regards,
> Ivo

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

N900 modem support in 3.18-rc1

[Sebastian Reichel]

Hi,

On Fri, Nov 14, 2014 at 09:04:23AM +0200, Ivaylo Dimitrov wrote:
> [...]
> https://gitorious.org/linux-n900/freemangordons-linux-n900/commits/30e9a5c498a89cea4c29523f69e436bf0af3c631
> 
> commits 89ce13b, b81d80d, ec4d0dc, 91256e2 and 8022a6d - e29f558 (no idea
> why gitorious shows those mixed with SGX stuff, on my local tree it is
> contiguous patch series)
> 
> didn't test against the current upstream, but I see no reason why those
> should not apply, build and run.

The patch looks ok. It does not cleanup the cmt-speech driver for
mainline usage, but it should work. Before adding this driver to the
mainline kernel there should be open source userspace support anyway.

Btw. I am aware that this would break existing pulse audio stuff,
but wouldn't it make sense to export a V4L2 device instead of the
custom /dev/cmt_speech ABI?

> > >About the pulseaudio stuff - we're still in process of REing it, so
> > >far there are 2 out of 3 closed Nokia modules ready
> > >(https://gitorious.org/pulseaudio-nokia), but the last one, which is
> > >the one used for voice calls is still not ready and will take it a
> > >while :).
> >
> > Ok, is there a way I could help? Pretty much everything else works with
> > opensource drivers...
> >
> 
> There is, though I am not sure you'll like it much - fire up IDA and join
> the party :P. Ping me on IRC for more details in case you're interested.
> 
> Regards,
> Ivo

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141114/d7c1564c/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Pali Rohár]

[-- Attachment #1: Type: Text/Plain, Size: 1403 bytes --]

On Friday 14 November 2014 18:20:09 Sebastian Reichel wrote:
> Hi,
> 
> On Fri, Nov 14, 2014 at 09:04:23AM +0200, Ivaylo Dimitrov 
wrote:
> > [...]
> > https://gitorious.org/linux-n900/freemangordons-linux-n900/c
> > ommits/30e9a5c498a89cea4c29523f69e436bf0af3c631
> > 
> > commits 89ce13b, b81d80d, ec4d0dc, 91256e2 and 8022a6d -
> > e29f558 (no idea why gitorious shows those mixed with SGX
> > stuff, on my local tree it is contiguous patch series)
> > 
> > didn't test against the current upstream, but I see no
> > reason why those should not apply, build and run.
> 
> The patch looks ok. It does not cleanup the cmt-speech driver
> for mainline usage, but it should work. Before adding this
> driver to the mainline kernel there should be open source
> userspace support anyway.
> 
> Btw. I am aware that this would break existing pulse audio
> stuff, but wouldn't it make sense to export a V4L2 device
> instead of the custom /dev/cmt_speech ABI?
> 

It is not good idea to break existing applications even if they 
are closed... And there are some open source meego/nemo 
pulseaudio modules which using cmt speech (but audio quality is 
worse).

Anyway what is /dev/cmt_speech doing? If it exports gsm voice 
call data, should not it have alsa snd interface?

V4L2 interface is not for video/camera/capture/tv cards?

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

N900 modem support in 3.18-rc1

[Pali Rohár]

On Friday 14 November 2014 18:20:09 Sebastian Reichel wrote:
> Hi,
> 
> On Fri, Nov 14, 2014 at 09:04:23AM +0200, Ivaylo Dimitrov 
wrote:
> > [...]
> > https://gitorious.org/linux-n900/freemangordons-linux-n900/c
> > ommits/30e9a5c498a89cea4c29523f69e436bf0af3c631
> > 
> > commits 89ce13b, b81d80d, ec4d0dc, 91256e2 and 8022a6d -
> > e29f558 (no idea why gitorious shows those mixed with SGX
> > stuff, on my local tree it is contiguous patch series)
> > 
> > didn't test against the current upstream, but I see no
> > reason why those should not apply, build and run.
> 
> The patch looks ok. It does not cleanup the cmt-speech driver
> for mainline usage, but it should work. Before adding this
> driver to the mainline kernel there should be open source
> userspace support anyway.
> 
> Btw. I am aware that this would break existing pulse audio
> stuff, but wouldn't it make sense to export a V4L2 device
> instead of the custom /dev/cmt_speech ABI?
> 

It is not good idea to break existing applications even if they 
are closed... And there are some open source meego/nemo 
pulseaudio modules which using cmt speech (but audio quality is 
worse).

Anyway what is /dev/cmt_speech doing? If it exports gsm voice 
call data, should not it have alsa snd interface?

V4L2 interface is not for video/camera/capture/tv cards?

-- 
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141114/895d1e1e/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Ivaylo Dimitrov]

On 14.11.2014 19:20, Sebastian Reichel wrote:
>
> The patch looks ok. It does not cleanup the cmt-speech driver for
> mainline usage, but it should work. Before adding this driver to the
> mainline kernel there should be open source userspace support anyway.
>

I am aware of that(patch not ready), it's one of the reasons this patch 
still sits on gitorious IMO.

libcmtspeechdata was opened by Nokia long ago, so I don't understand 
what userspace support (for inclusion of the driver in the mainline 
kernel that is) is needed. see 
https://gitorious.org/meego-cellular/libcmtspeechdata/source/7f8f3ce357513e4849e1bf6d657980a514529c1a:

REed pulseaudio modules that use cmtspeech will be ready sooner than 
later (I believe in 2-3 monts from now), see on gitorious how fast we 
progressed with -record and -music modules. Sure, -voice module is way 
more complicated, but lots of it is already opensourced, we just need to 
figure out a couple of DSP algorithms(drc, agc, aec, etc) related to 
call quality. But I don't think the driver should wait for those modules 
to be REed, they can be used as is even now, in their closed form for 
testing. Unfortunately all my spare time is dedicated to that PA stuff, 
so I simply can't cleanup cmtspeech driver and send a patch for 
upstreaming. (Pavel, what about you?)

> Btw. I am aware that this would break existing pulse audio stuff,
> but wouldn't it make sense to export a V4L2 device instead of the
> custom /dev/cmt_speech ABI?
>

Nokia PA guys did a great job integrating lots of things related to 
audio and honestly, I don't see a reason why should we reinvent the 
wheel. There is lot more behind the scenes than simple PCM streaming 
(like audio policies and routing, sideband audio, speakers protection, 
etc) and reiplementing all this using different API wouldn't worth it IMO.

Not to say that I agree with Pali's reply that working userspace should 
not be broken just for the sake of it.

Ivo

N900 modem support in 3.18-rc1

[Ivaylo Dimitrov]

On 14.11.2014 19:20, Sebastian Reichel wrote:
>
> The patch looks ok. It does not cleanup the cmt-speech driver for
> mainline usage, but it should work. Before adding this driver to the
> mainline kernel there should be open source userspace support anyway.
>

I am aware of that(patch not ready), it's one of the reasons this patch 
still sits on gitorious IMO.

libcmtspeechdata was opened by Nokia long ago, so I don't understand 
what userspace support (for inclusion of the driver in the mainline 
kernel that is) is needed. see 
https://gitorious.org/meego-cellular/libcmtspeechdata/source/7f8f3ce357513e4849e1bf6d657980a514529c1a:

REed pulseaudio modules that use cmtspeech will be ready sooner than 
later (I believe in 2-3 monts from now), see on gitorious how fast we 
progressed with -record and -music modules. Sure, -voice module is way 
more complicated, but lots of it is already opensourced, we just need to 
figure out a couple of DSP algorithms(drc, agc, aec, etc) related to 
call quality. But I don't think the driver should wait for those modules 
to be REed, they can be used as is even now, in their closed form for 
testing. Unfortunately all my spare time is dedicated to that PA stuff, 
so I simply can't cleanup cmtspeech driver and send a patch for 
upstreaming. (Pavel, what about you?)

> Btw. I am aware that this would break existing pulse audio stuff,
> but wouldn't it make sense to export a V4L2 device instead of the
> custom /dev/cmt_speech ABI?
>

Nokia PA guys did a great job integrating lots of things related to 
audio and honestly, I don't see a reason why should we reinvent the 
wheel. There is lot more behind the scenes than simple PCM streaming 
(like audio policies and routing, sideband audio, speakers protection, 
etc) and reiplementing all this using different API wouldn't worth it IMO.

Not to say that I agree with Pali's reply that working userspace should 
not be broken just for the sake of it.

Ivo

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

On Fri 2014-11-14 21:54:42, Ivaylo Dimitrov wrote:
> On 14.11.2014 19:20, Sebastian Reichel wrote:
> >
> >The patch looks ok. It does not cleanup the cmt-speech driver for
> >mainline usage, but it should work. Before adding this driver to the
> >mainline kernel there should be open source userspace support anyway.
> >
> 
> I am aware of that(patch not ready), it's one of the reasons this patch
> still sits on gitorious IMO.
> 
> libcmtspeechdata was opened by Nokia long ago, so I don't understand what
> userspace support (for inclusion of the driver in the mainline kernel that
> is) is needed. see https://gitorious.org/meego-cellular/libcmtspeechdata/source/7f8f3ce357513e4849e1bf6d657980a514529c1a:
> 
> REed pulseaudio modules that use cmtspeech will be ready sooner than later
> (I believe in 2-3 monts from now), see on gitorious how fast we progressed
> with -record and -music modules. Sure, -voice module is way more
> complicated, but lots of it is already opensourced, we just need to figure
> out a couple of DSP algorithms(drc, agc, aec, etc) related to call quality.
> But I don't think the driver should wait for those modules to be REed, they
> can be used as is even now, in their closed form for testing. Unfortunately
> all my spare time is dedicated to that PA stuff, so I simply can't cleanup
> cmtspeech driver and send a patch for upstreaming. (Pavel, what
>about you?)

Hey, I can try.

But there are two things I'd like to understand, first:

a) how did Mer people solve this? Or did they just ship nokia
binaries?

b) do we really need those DSP algorithms? Can we just take data from
microphone and send it down the GSM line, and take data from GSM line
and put it to the speaker? If it will not work in the speakerphone
mode, I can live with that... It should somehow work in normal-phone
mode, and be definitely feasible with wired handsfree, no?

Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

On Fri 2014-11-14 21:54:42, Ivaylo Dimitrov wrote:
> On 14.11.2014 19:20, Sebastian Reichel wrote:
> >
> >The patch looks ok. It does not cleanup the cmt-speech driver for
> >mainline usage, but it should work. Before adding this driver to the
> >mainline kernel there should be open source userspace support anyway.
> >
> 
> I am aware of that(patch not ready), it's one of the reasons this patch
> still sits on gitorious IMO.
> 
> libcmtspeechdata was opened by Nokia long ago, so I don't understand what
> userspace support (for inclusion of the driver in the mainline kernel that
> is) is needed. see https://gitorious.org/meego-cellular/libcmtspeechdata/source/7f8f3ce357513e4849e1bf6d657980a514529c1a:
> 
> REed pulseaudio modules that use cmtspeech will be ready sooner than later
> (I believe in 2-3 monts from now), see on gitorious how fast we progressed
> with -record and -music modules. Sure, -voice module is way more
> complicated, but lots of it is already opensourced, we just need to figure
> out a couple of DSP algorithms(drc, agc, aec, etc) related to call quality.
> But I don't think the driver should wait for those modules to be REed, they
> can be used as is even now, in their closed form for testing. Unfortunately
> all my spare time is dedicated to that PA stuff, so I simply can't cleanup
> cmtspeech driver and send a patch for upstreaming. (Pavel, what
>about you?)

Hey, I can try.

But there are two things I'd like to understand, first:

a) how did Mer people solve this? Or did they just ship nokia
binaries?

b) do we really need those DSP algorithms? Can we just take data from
microphone and send it down the GSM line, and take data from GSM line
and put it to the speaker? If it will not work in the speakerphone
mode, I can live with that... It should somehow work in normal-phone
mode, and be definitely feasible with wired handsfree, no?

Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 2919 bytes --]

Hi,

On Fri, Nov 14, 2014 at 09:54:42PM +0200, Ivaylo Dimitrov wrote:
> On 14.11.2014 19:20, Sebastian Reichel wrote:
> >The patch looks ok. It does not cleanup the cmt-speech driver for
> >mainline usage, but it should work. Before adding this driver to the
> >mainline kernel there should be open source userspace support anyway.
> 
> I am aware of that(patch not ready), it's one of the reasons this
> patch still sits on gitorious IMO.
> 
> libcmtspeechdata was opened by Nokia long ago, so I don't understand what
> userspace support (for inclusion of the driver in the mainline kernel that
> is) is needed. see https://gitorious.org/meego-cellular/libcmtspeechdata/source/7f8f3ce357513e4849e1bf6d657980a514529c1a:

ah cool. I assumed, that userland stuff is mostly closed.

> REed pulseaudio modules that use cmtspeech will be ready sooner than later
> (I believe in 2-3 monts from now), see on gitorious how fast we progressed
> with -record and -music modules. Sure, -voice module is way more
> complicated, but lots of it is already opensourced, we just need to figure
> out a couple of DSP algorithms(drc, agc, aec, etc) related to call quality.
> But I don't think the driver should wait for those modules to be REed, they
> can be used as is even now, in their closed form for testing.

https://gitorious.org/pulseaudio-modules-nemo/jusas-tanuk2-mer-packaging/source/6ed34611b49c99b007f614d9dff4d58369876345:
https://github.com/nemomobile/pulseaudio-module-cmtspeech-n9xx/commits/master

It seems there is already cmtspeech code for pulseaudio?

> Unfortunately all my spare time is dedicated to that PA stuff, so
> I simply can't cleanup cmtspeech driver and send a patch for
> upstreaming. (Pavel, what about you?)

If somebody gets audio working with your driver and documents the
steps needed in userland I will take care of upstreaming the driver.

> >Btw. I am aware that this would break existing pulse audio stuff,
> >but wouldn't it make sense to export a V4L2 device instead of the
> >custom /dev/cmt_speech ABI?
> 
> Not to say that I agree with Pali's reply that working userspace should not
> be broken just for the sake of it.

Actually the mainline kernel never implemented that interface, so
there is no regression/break and I don't think introducing userspace
ABI's should be done carelessly - especially when there is also a
standardized interface.

> Nokia PA guys did a great job integrating lots of things related to audio
> and honestly, I don't see a reason why should we reinvent the wheel. There
> is lot more behind the scenes than simple PCM streaming (like audio policies
> and routing, sideband audio, speakers protection, etc) and reiplementing all
> this using different API wouldn't worth it IMO.

What has speaker protection to do with the modem interface?
Shouldn't this be two different PA modules?

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

N900 modem support in 3.18-rc1

[Sebastian Reichel]

Hi,

On Fri, Nov 14, 2014 at 09:54:42PM +0200, Ivaylo Dimitrov wrote:
> On 14.11.2014 19:20, Sebastian Reichel wrote:
> >The patch looks ok. It does not cleanup the cmt-speech driver for
> >mainline usage, but it should work. Before adding this driver to the
> >mainline kernel there should be open source userspace support anyway.
> 
> I am aware of that(patch not ready), it's one of the reasons this
> patch still sits on gitorious IMO.
> 
> libcmtspeechdata was opened by Nokia long ago, so I don't understand what
> userspace support (for inclusion of the driver in the mainline kernel that
> is) is needed. see https://gitorious.org/meego-cellular/libcmtspeechdata/source/7f8f3ce357513e4849e1bf6d657980a514529c1a:

ah cool. I assumed, that userland stuff is mostly closed.

> REed pulseaudio modules that use cmtspeech will be ready sooner than later
> (I believe in 2-3 monts from now), see on gitorious how fast we progressed
> with -record and -music modules. Sure, -voice module is way more
> complicated, but lots of it is already opensourced, we just need to figure
> out a couple of DSP algorithms(drc, agc, aec, etc) related to call quality.
> But I don't think the driver should wait for those modules to be REed, they
> can be used as is even now, in their closed form for testing.

https://gitorious.org/pulseaudio-modules-nemo/jusas-tanuk2-mer-packaging/source/6ed34611b49c99b007f614d9dff4d58369876345:
https://github.com/nemomobile/pulseaudio-module-cmtspeech-n9xx/commits/master

It seems there is already cmtspeech code for pulseaudio?

> Unfortunately all my spare time is dedicated to that PA stuff, so
> I simply can't cleanup cmtspeech driver and send a patch for
> upstreaming. (Pavel, what about you?)

If somebody gets audio working with your driver and documents the
steps needed in userland I will take care of upstreaming the driver.

> >Btw. I am aware that this would break existing pulse audio stuff,
> >but wouldn't it make sense to export a V4L2 device instead of the
> >custom /dev/cmt_speech ABI?
> 
> Not to say that I agree with Pali's reply that working userspace should not
> be broken just for the sake of it.

Actually the mainline kernel never implemented that interface, so
there is no regression/break and I don't think introducing userspace
ABI's should be done carelessly - especially when there is also a
standardized interface.

> Nokia PA guys did a great job integrating lots of things related to audio
> and honestly, I don't see a reason why should we reinvent the wheel. There
> is lot more behind the scenes than simple PCM streaming (like audio policies
> and routing, sideband audio, speakers protection, etc) and reiplementing all
> this using different API wouldn't worth it IMO.

What has speaker protection to do with the modem interface?
Shouldn't this be two different PA modules?

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141114/0ecb4cb2/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 556 bytes --]

Hi,

On Fri, Nov 14, 2014 at 06:34:18PM +0100, Pali Rohár wrote:
> Anyway what is /dev/cmt_speech doing? If it exports gsm voice 
> call data, [...]

Right.

> [...] should not it have alsa snd interface?

Sounds also like a promising standardized kernel interface.
I wonder why a custom interface has been chosen in the first
place.

> V4L2 interface is not for video/camera/capture/tv cards?

The V4L2 interface is also used for radio interfaces (e.g. the
N900's fm receiver/transmitter) and for software defined radio.

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

N900 modem support in 3.18-rc1

[Sebastian Reichel]

Hi,

On Fri, Nov 14, 2014 at 06:34:18PM +0100, Pali Roh?r wrote:
> Anyway what is /dev/cmt_speech doing? If it exports gsm voice 
> call data, [...]

Right.

> [...] should not it have alsa snd interface?

Sounds also like a promising standardized kernel interface.
I wonder why a custom interface has been chosen in the first
place.

> V4L2 interface is not for video/camera/capture/tv cards?

The V4L2 interface is also used for radio interfaces (e.g. the
N900's fm receiver/transmitter) and for software defined radio.

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141114/38ed5f3a/attachment.sig>

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

On Thu 2014-11-13 20:18:04, Aaro Koskinen wrote:
> Hi,
> 
> On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
> > * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> > > OTOH ofono seems pretty reasonable. So I played a bit, and result
> > > is python/pygtk gui which can receive an sms, initiate a call, and
> > > report missed call. If someone wants to play, source is at
> > > 
> > > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> > 
> > Pavel, care to fill in the the following type patch with some
> > instructions in the description now that you got it working?
> 
> Could we even have some "permanent" instructions under Documentation/?

Something like this?

commit 375d8d9f17433ade6afae91d4f34e170f0af04c4
Author: Pavel <pavel@ucw.cz>
Date:   Sun Nov 16 11:10:59 2014 +0100

Add basic documentation for n900 testing.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

diff --git a/Documentation/cellphones.txt b/Documentation/cellphones.txt
new file mode 100644
index 0000000..d7e8e7a
--- /dev/null
+++ b/Documentation/cellphones.txt
@@ -0,0 +1,90 @@
+Running Linux on Cellphones
+===========================
+
+At this moment (2014), there are no cellphones completely supported by
+mainline kernel. Another problem is lack of hackable userspace to run
+on cellphone, even when kernel support is available.
+
+Openmoko was first phone running Linux with X. GSM support there was
+based on freesmartphone.org daemons.
+
+Sony has project to merge kernel support for Xperia Z1.
+
+Nokia N900
+----------
+
+Nokia N900 orignally shipped with Maemo-based userland, which is close
+enough to GNU/X/apt based Linux; key components communicate using dbus
+and application can be written in pygtk. Kernel patches were
+relatively clean, and the core stuff is merged, unfortunately there's
+quite a lot of non-core stuff and pieces of userland are closed
+source; including some critical support such as bridge between CPU and
+modem for voice calls.
+
+Unfortunately, that means that kernel development is hard, because it
+is non-trivial to test all the various devices in the phone due to
+lack of suitable userspace and userspace development is hard, because
+there's no suitable kernel to work with.
+
+Here are instructions for getting usable userspace for kernel testing,
+and suggestions for some tests. Setting up nfsroot (needs non-mainline
+patch) is strongly recommended for development.
+
+I'm using Debian 7 for testing/development. It works well including
+touchscreen and X support, as of 3.18-rc1. Instructions are here:
+
+https://wiki.debian.org/n900-wheezy-armhf
+https://wiki.debian.org/MaemoAndSqueeze
+
+Following packages are useful on N900:
+
+libts-bin evtest ntpdate module-init-tools udev netbase ifupdown openssh-server
+locales whiptail less mpg123 mplayer ofono gcc strace mdbus2
+
+This calibrates display to usable state on recent kernel and Debian 7:
+
+DISPLAY=:0.0 xinput --set-prop --type=float 8 115  1.10 0.00 -0.05  0.00 1.18 -0.10  0.00 0.00 1.00
+DISPLAY=:0.0 xinput --set-prop --type=int 8 249 0 1
+
+# Test vibrations
+echo 5 | fftest /dev/input/event2
+
+# Test LEDs
+VAL=30
+echo $VAL > lp5523\:kb1/brightness
+echo $VAL > lp5523\:kb1/brightness
+echo $VAL > lp5523\:kb2/brightness
+echo $VAL > lp5523\:kb3/brightness
+echo $VAL > lp5523\:kb4/brightness
+echo $VAL > lp5523\:kb5/brightness
+echo $VAL > lp5523\:kb6/brightness
+echo $VAL > lp5523\:r/brightness
+echo $VAL > lp5523\:g/brightness
+echo $VAL > lp5523\:b/brightness
+echo 100 > /sys/class/backlight/acx565akm/brightness
+echo mem > /sys/power/state
+
+# Display battery/charging state
+cd /sys/bus/i2c/drivers/bq27x00-battery/2-0055/power_supply/bq27200-0
+grep -r . .
+
+# Start	up ofono in debug mode
+rmdir /dev/cmt
+ln -s /sys/bus/hsi/devices/n900-modem/ /dev/cmt
+killall  ofonod
+sleep .1
+ofonod --nodetach --debug &
+
+# Test modem works
+# enable the modem
+mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Powered true
+# enable modem's RF parts
+mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Online true
+# scan for available networks (takes some time)
+mdbus2 -s org.ofono /n900_0 org.ofono.NetworkRegistration.Scan
+
+
+								Good luck!
+
+								Pavel
+


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

On Thu 2014-11-13 20:18:04, Aaro Koskinen wrote:
> Hi,
> 
> On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
> > * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> > > OTOH ofono seems pretty reasonable. So I played a bit, and result
> > > is python/pygtk gui which can receive an sms, initiate a call, and
> > > report missed call. If someone wants to play, source is at
> > > 
> > > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> > 
> > Pavel, care to fill in the the following type patch with some
> > instructions in the description now that you got it working?
> 
> Could we even have some "permanent" instructions under Documentation/?

Something like this?

commit 375d8d9f17433ade6afae91d4f34e170f0af04c4
Author: Pavel <pavel@ucw.cz>
Date:   Sun Nov 16 11:10:59 2014 +0100

Add basic documentation for n900 testing.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

diff --git a/Documentation/cellphones.txt b/Documentation/cellphones.txt
new file mode 100644
index 0000000..d7e8e7a
--- /dev/null
+++ b/Documentation/cellphones.txt
@@ -0,0 +1,90 @@
+Running Linux on Cellphones
+===========================
+
+At this moment (2014), there are no cellphones completely supported by
+mainline kernel. Another problem is lack of hackable userspace to run
+on cellphone, even when kernel support is available.
+
+Openmoko was first phone running Linux with X. GSM support there was
+based on freesmartphone.org daemons.
+
+Sony has project to merge kernel support for Xperia Z1.
+
+Nokia N900
+----------
+
+Nokia N900 orignally shipped with Maemo-based userland, which is close
+enough to GNU/X/apt based Linux; key components communicate using dbus
+and application can be written in pygtk. Kernel patches were
+relatively clean, and the core stuff is merged, unfortunately there's
+quite a lot of non-core stuff and pieces of userland are closed
+source; including some critical support such as bridge between CPU and
+modem for voice calls.
+
+Unfortunately, that means that kernel development is hard, because it
+is non-trivial to test all the various devices in the phone due to
+lack of suitable userspace and userspace development is hard, because
+there's no suitable kernel to work with.
+
+Here are instructions for getting usable userspace for kernel testing,
+and suggestions for some tests. Setting up nfsroot (needs non-mainline
+patch) is strongly recommended for development.
+
+I'm using Debian 7 for testing/development. It works well including
+touchscreen and X support, as of 3.18-rc1. Instructions are here:
+
+https://wiki.debian.org/n900-wheezy-armhf
+https://wiki.debian.org/MaemoAndSqueeze
+
+Following packages are useful on N900:
+
+libts-bin evtest ntpdate module-init-tools udev netbase ifupdown openssh-server
+locales whiptail less mpg123 mplayer ofono gcc strace mdbus2
+
+This calibrates display to usable state on recent kernel and Debian 7:
+
+DISPLAY=:0.0 xinput --set-prop --type=float 8 115  1.10 0.00 -0.05  0.00 1.18 -0.10  0.00 0.00 1.00
+DISPLAY=:0.0 xinput --set-prop --type=int 8 249 0 1
+
+# Test vibrations
+echo 5 | fftest /dev/input/event2
+
+# Test LEDs
+VAL=30
+echo $VAL > lp5523\:kb1/brightness
+echo $VAL > lp5523\:kb1/brightness
+echo $VAL > lp5523\:kb2/brightness
+echo $VAL > lp5523\:kb3/brightness
+echo $VAL > lp5523\:kb4/brightness
+echo $VAL > lp5523\:kb5/brightness
+echo $VAL > lp5523\:kb6/brightness
+echo $VAL > lp5523\:r/brightness
+echo $VAL > lp5523\:g/brightness
+echo $VAL > lp5523\:b/brightness
+echo 100 > /sys/class/backlight/acx565akm/brightness
+echo mem > /sys/power/state
+
+# Display battery/charging state
+cd /sys/bus/i2c/drivers/bq27x00-battery/2-0055/power_supply/bq27200-0
+grep -r . .
+
+# Start	up ofono in debug mode
+rmdir /dev/cmt
+ln -s /sys/bus/hsi/devices/n900-modem/ /dev/cmt
+killall  ofonod
+sleep .1
+ofonod --nodetach --debug &
+
+# Test modem works
+# enable the modem
+mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Powered true
+# enable modem's RF parts
+mdbus2 -s org.ofono /n900_0 org.ofono.Modem.SetProperty Online true
+# scan for available networks (takes some time)
+mdbus2 -s org.ofono /n900_0 org.ofono.NetworkRegistration.Scan
+
+
+								Good luck!
+
+								Pavel
+


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Robert Jarzmik]

Pavel Machek <pavel@ucw.cz> writes:

> On Thu 2014-11-13 20:18:04, Aaro Koskinen wrote:
>> Hi,
>> 
>> On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
>> > * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
>> > > OTOH ofono seems pretty reasonable. So I played a bit, and result
>> > > is python/pygtk gui which can receive an sms, initiate a call, and
>> > > report missed call. If someone wants to play, source is at
>> > > 
>> > > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
>> > 
>> > Pavel, care to fill in the the following type patch with some
>> > instructions in the description now that you got it working?
>> 
>> Could we even have some "permanent" instructions under Documentation/?
>
> Something like this?
>
> commit 375d8d9f17433ade6afae91d4f34e170f0af04c4
> Author: Pavel <pavel@ucw.cz>
> Date:   Sun Nov 16 11:10:59 2014 +0100
>
> Add basic documentation for n900 testing.
>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> diff --git a/Documentation/cellphones.txt b/Documentation/cellphones.txt
> new file mode 100644
> index 0000000..d7e8e7a
> --- /dev/null
> +++ b/Documentation/cellphones.txt
> @@ -0,0 +1,90 @@
> +Running Linux on Cellphones
> +===========================
> +
> +At this moment (2014), there are no cellphones completely supported by
> +mainline kernel. Another problem is lack of hackable userspace to run
> +on cellphone, even when kernel support is available.
Hi Pavel,

There is the Mitac Mio A701. Very old but still it is there, with the kernel
part maintained.

Userspace was based on QTopia in 2008. I don't maintain that part anymore
though.

The GSM part relies on a simple ttyS device (modem has its internal flash), no
real data at that time, or rather 2G only, but the 07.10 mux support was never
included in Qtopia ...

Cheers.

-- 
Robert

N900 modem support in 3.18-rc1

[Robert Jarzmik]

Pavel Machek <pavel@ucw.cz> writes:

> On Thu 2014-11-13 20:18:04, Aaro Koskinen wrote:
>> Hi,
>> 
>> On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
>> > * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
>> > > OTOH ofono seems pretty reasonable. So I played a bit, and result
>> > > is python/pygtk gui which can receive an sms, initiate a call, and
>> > > report missed call. If someone wants to play, source is at
>> > > 
>> > > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
>> > 
>> > Pavel, care to fill in the the following type patch with some
>> > instructions in the description now that you got it working?
>> 
>> Could we even have some "permanent" instructions under Documentation/?
>
> Something like this?
>
> commit 375d8d9f17433ade6afae91d4f34e170f0af04c4
> Author: Pavel <pavel@ucw.cz>
> Date:   Sun Nov 16 11:10:59 2014 +0100
>
> Add basic documentation for n900 testing.
>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> diff --git a/Documentation/cellphones.txt b/Documentation/cellphones.txt
> new file mode 100644
> index 0000000..d7e8e7a
> --- /dev/null
> +++ b/Documentation/cellphones.txt
> @@ -0,0 +1,90 @@
> +Running Linux on Cellphones
> +===========================
> +
> +At this moment (2014), there are no cellphones completely supported by
> +mainline kernel. Another problem is lack of hackable userspace to run
> +on cellphone, even when kernel support is available.
Hi Pavel,

There is the Mitac Mio A701. Very old but still it is there, with the kernel
part maintained.

Userspace was based on QTopia in 2008. I don't maintain that part anymore
though.

The GSM part relies on a simple ttyS device (modem has its internal flash), no
real data at that time, or rather 2G only, but the 07.10 mux support was never
included in Qtopia ...

Cheers.

-- 
Robert

Re: N900 modem support in 3.18-rc1

[Pavel Machek]

On Sun 2014-11-16 13:29:50, Robert Jarzmik wrote:
> Pavel Machek <pavel@ucw.cz> writes:
> 
> > On Thu 2014-11-13 20:18:04, Aaro Koskinen wrote:
> >> Hi,
> >> 
> >> On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
> >> > * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> >> > > OTOH ofono seems pretty reasonable. So I played a bit, and result
> >> > > is python/pygtk gui which can receive an sms, initiate a call, and
> >> > > report missed call. If someone wants to play, source is at
> >> > > 
> >> > > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> >> > 
> >> > Pavel, care to fill in the the following type patch with some
> >> > instructions in the description now that you got it working?
> >> 
> >> Could we even have some "permanent" instructions under Documentation/?
> >
> > Something like this?
> >
> > commit 375d8d9f17433ade6afae91d4f34e170f0af04c4
> > Author: Pavel <pavel@ucw.cz>
> > Date:   Sun Nov 16 11:10:59 2014 +0100
> >
> > Add basic documentation for n900 testing.
> >
> > Signed-off-by: Pavel Machek <pavel@ucw.cz>
> >
> > diff --git a/Documentation/cellphones.txt b/Documentation/cellphones.txt
> > new file mode 100644
> > index 0000000..d7e8e7a
> > --- /dev/null
> > +++ b/Documentation/cellphones.txt
> > @@ -0,0 +1,90 @@
> > +Running Linux on Cellphones
> > +===========================
> > +
> > +At this moment (2014), there are no cellphones completely supported by
> > +mainline kernel. Another problem is lack of hackable userspace to run
> > +on cellphone, even when kernel support is available.
> Hi Pavel,
> 
> There is the Mitac Mio A701. Very old but still it is there, with the kernel
> part maintained.
> 
> Userspace was based on QTopia in 2008. I don't maintain that part anymore
> though.
> 
> The GSM part relies on a simple ttyS device (modem has its internal flash), no
> real data at that time, or rather 2G only, but the 07.10 mux support was never
> included in Qtopia ...

Thanks for the info. 

I added 

"
+Mainline has support for Mitac Mio A701, but that having only 64MiB
+RAM, QTopia is the software to use there.
"
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

N900 modem support in 3.18-rc1

[Pavel Machek]

On Sun 2014-11-16 13:29:50, Robert Jarzmik wrote:
> Pavel Machek <pavel@ucw.cz> writes:
> 
> > On Thu 2014-11-13 20:18:04, Aaro Koskinen wrote:
> >> Hi,
> >> 
> >> On Thu, Nov 13, 2014 at 09:45:36AM -0800, Tony Lindgren wrote:
> >> > * Pavel Machek <pavel@ucw.cz> [141113 08:23]:
> >> > > OTOH ofono seems pretty reasonable. So I played a bit, and result
> >> > > is python/pygtk gui which can receive an sms, initiate a call, and
> >> > > report missed call. If someone wants to play, source is at
> >> > > 
> >> > > https://gitorious.org/tui/tui/source/b6141107e9341a1412720aed4b0d09143dfa2f4e:ofone
> >> > 
> >> > Pavel, care to fill in the the following type patch with some
> >> > instructions in the description now that you got it working?
> >> 
> >> Could we even have some "permanent" instructions under Documentation/?
> >
> > Something like this?
> >
> > commit 375d8d9f17433ade6afae91d4f34e170f0af04c4
> > Author: Pavel <pavel@ucw.cz>
> > Date:   Sun Nov 16 11:10:59 2014 +0100
> >
> > Add basic documentation for n900 testing.
> >
> > Signed-off-by: Pavel Machek <pavel@ucw.cz>
> >
> > diff --git a/Documentation/cellphones.txt b/Documentation/cellphones.txt
> > new file mode 100644
> > index 0000000..d7e8e7a
> > --- /dev/null
> > +++ b/Documentation/cellphones.txt
> > @@ -0,0 +1,90 @@
> > +Running Linux on Cellphones
> > +===========================
> > +
> > +At this moment (2014), there are no cellphones completely supported by
> > +mainline kernel. Another problem is lack of hackable userspace to run
> > +on cellphone, even when kernel support is available.
> Hi Pavel,
> 
> There is the Mitac Mio A701. Very old but still it is there, with the kernel
> part maintained.
> 
> Userspace was based on QTopia in 2008. I don't maintain that part anymore
> though.
> 
> The GSM part relies on a simple ttyS device (modem has its internal flash), no
> real data at that time, or rather 2G only, but the 07.10 mux support was never
> included in Qtopia ...

Thanks for the info. 

I added 

"
+Mainline has support for Mitac Mio A701, but that having only 64MiB
+RAM, QTopia is the software to use there.
"
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: N900 modem support in 3.18-rc1

[Robert Jarzmik]

Pavel Machek <pavel@ucw.cz> writes:

> Thanks for the info. 
>
> I added 
>
> "
> +Mainline has support for Mitac Mio A701, but that having only 64MiB
> +RAM, QTopia is the software to use there.
> "

Thanks Pavel, that looks good.

Cheers.

-- 
Robert

N900 modem support in 3.18-rc1

[Robert Jarzmik]

Pavel Machek <pavel@ucw.cz> writes:

> Thanks for the info. 
>
> I added 
>
> "
> +Mainline has support for Mitac Mio A701, but that having only 64MiB
> +RAM, QTopia is the software to use there.
> "

Thanks Pavel, that looks good.

Cheers.

-- 
Robert

voice calls on N900 working (off-line) was Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> > REed pulseaudio modules that use cmtspeech will be ready sooner than later
> > (I believe in 2-3 monts from now), see on gitorious how fast we progressed
> > with -record and -music modules. Sure, -voice module is way more
> > complicated, but lots of it is already opensourced, we just need to figure
> > out a couple of DSP algorithms(drc, agc, aec, etc) related to call quality.
> > But I don't think the driver should wait for those modules to be REed, they
> > can be used as is even now, in their closed form for testing.
> 
> https://gitorious.org/pulseaudio-modules-nemo/jusas-tanuk2-mer-packaging/source/6ed34611b49c99b007f614d9dff4d58369876345:
> https://github.com/nemomobile/pulseaudio-module-cmtspeech-n9xx/commits/master
> 
> It seems there is already cmtspeech code for pulseaudio?

Yes, and it works; but see below.

> > Unfortunately all my spare time is dedicated to that PA stuff, so
> > I simply can't cleanup cmtspeech driver and send a patch for
> > upstreaming. (Pavel, what about you?)
> 
> If somebody gets audio working with your driver and documents the
> steps needed in userland I will take care of upstreaming the driver.

I got it to work.

Ok, so realtime audio does not work due to some pulseaudio problems,
but I was able to record a (silent) call and then replay it with 

pacat --rate 4000 ../../../pulseaudio2.raw

on my PC. I have yet to do some testing on the microphone side.

I'm using Debian 7 as a a base, and I suggest nfsroot.

It seems that libcmtspeechdata + pulseaudio-module-cmtspeech-n9xx is
enough to get calls to work. Now. I could not get configure on these
packages to work, so I hard-coded build scripts (mkit). You'll need to
symlink resulting .so to pulseaudio directory (see
/my/pulseaudio-module-cmtspeech-n9xx/src/cmtspeech/mkit). I leave binaries in,
since this is non-trivial to compile. Some memory allocation stuff was
missing. I faked it; it seems it is not needed in the first call.

untar in the root directory of n900. Reset n900, no need to log in
into console, connect using ssh -X root@n900.

Then go to /my/tui/ofone. Run "./run" -- that should start
pulseaudio. Run "./ofone", hit "lowlevel: online", hit "contacts",
enter phone number you want to call, hit the number, it should start
dialing.

Wait a while, hit "lowlevel: hangup".

Now you should have:

/my/pulseaudio2.raw

you can play with pacat above, and /my/pulseaudio.log.*, which
contains stuff that needs to be fixed.

I've put the archive at

http://atrey.karlin.mff.cuni.cz/~pavel/outgoing/n900-my.tgz

Have fun!

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

voice calls on N900 working (off-line) was Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> > REed pulseaudio modules that use cmtspeech will be ready sooner than later
> > (I believe in 2-3 monts from now), see on gitorious how fast we progressed
> > with -record and -music modules. Sure, -voice module is way more
> > complicated, but lots of it is already opensourced, we just need to figure
> > out a couple of DSP algorithms(drc, agc, aec, etc) related to call quality.
> > But I don't think the driver should wait for those modules to be REed, they
> > can be used as is even now, in their closed form for testing.
> 
> https://gitorious.org/pulseaudio-modules-nemo/jusas-tanuk2-mer-packaging/source/6ed34611b49c99b007f614d9dff4d58369876345:
> https://github.com/nemomobile/pulseaudio-module-cmtspeech-n9xx/commits/master
> 
> It seems there is already cmtspeech code for pulseaudio?

Yes, and it works; but see below.

> > Unfortunately all my spare time is dedicated to that PA stuff, so
> > I simply can't cleanup cmtspeech driver and send a patch for
> > upstreaming. (Pavel, what about you?)
> 
> If somebody gets audio working with your driver and documents the
> steps needed in userland I will take care of upstreaming the driver.

I got it to work.

Ok, so realtime audio does not work due to some pulseaudio problems,
but I was able to record a (silent) call and then replay it with 

pacat --rate 4000 ../../../pulseaudio2.raw

on my PC. I have yet to do some testing on the microphone side.

I'm using Debian 7 as a a base, and I suggest nfsroot.

It seems that libcmtspeechdata + pulseaudio-module-cmtspeech-n9xx is
enough to get calls to work. Now. I could not get configure on these
packages to work, so I hard-coded build scripts (mkit). You'll need to
symlink resulting .so to pulseaudio directory (see
/my/pulseaudio-module-cmtspeech-n9xx/src/cmtspeech/mkit). I leave binaries in,
since this is non-trivial to compile. Some memory allocation stuff was
missing. I faked it; it seems it is not needed in the first call.

untar in the root directory of n900. Reset n900, no need to log in
into console, connect using ssh -X root at n900.

Then go to /my/tui/ofone. Run "./run" -- that should start
pulseaudio. Run "./ofone", hit "lowlevel: online", hit "contacts",
enter phone number you want to call, hit the number, it should start
dialing.

Wait a while, hit "lowlevel: hangup".

Now you should have:

/my/pulseaudio2.raw

you can play with pacat above, and /my/pulseaudio.log.*, which
contains stuff that needs to be fixed.

I've put the archive at

http://atrey.karlin.mff.cuni.cz/~pavel/outgoing/n900-my.tgz

Have fun!

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: voice calls on N900 working (off-line) was Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Ok, so realtime audio does not work due to some pulseaudio problems,
> but I was able to record a (silent) call and then replay it with 
> 
> pacat --rate 4000 ../../../pulseaudio2.raw
> 
> on my PC. I have yet to do some testing on the microphone side.

Did someone get pulseaudio to work on n900?

It somehow works for me, but not enough to actually produce sound.

root@n900:/my# pacat /my/pulseaudio2.raw 
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
root@n900:/my# pacmd
Welcome to PulseAudio! Use "help" for usage information.
>>> list-modules
22 module(s) loaded.
    index: 0
    name: <module-device-restore>
    argument: <>
    used: -1
    load once: yes
...

mpg123 actually works ok after adjusting the mixers.

Any ideas?

								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

voice calls on N900 working (off-line) was Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Ok, so realtime audio does not work due to some pulseaudio problems,
> but I was able to record a (silent) call and then replay it with 
> 
> pacat --rate 4000 ../../../pulseaudio2.raw
> 
> on my PC. I have yet to do some testing on the microphone side.

Did someone get pulseaudio to work on n900?

It somehow works for me, but not enough to actually produce sound.

root at n900:/my# pacat /my/pulseaudio2.raw 
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
root at n900:/my# pacmd
Welcome to PulseAudio! Use "help" for usage information.
>>> list-modules
22 module(s) loaded.
    index: 0
    name: <module-device-restore>
    argument: <>
    used: -1
    load once: yes
...

mpg123 actually works ok after adjusting the mixers.

Any ideas?

								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

GPRS data on N900 working was Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Then go to /my/tui/ofone. Run "./run" -- that should start
> pulseaudio. Run "./ofone", hit "lowlevel: online", hit "contacts",
> enter phone number you want to call, hit the number, it should start
> dialing.
> 
> Wait a while, hit "lowlevel: hangup".

I played a bit more, and now ofone can connect to GPRS. You'll need
version from git, see

https://gitorious.org/tui/tui/source/dff269a7ba419f573de5b90e8eea58227de8a9e6:ofone

Good luck,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

GPRS data on N900 working was Re: N900 modem support in 3.18-rc1

[Pavel Machek]

Hi!

> Then go to /my/tui/ofone. Run "./run" -- that should start
> pulseaudio. Run "./ofone", hit "lowlevel: online", hit "contacts",
> enter phone number you want to call, hit the number, it should start
> dialing.
> 
> Wait a while, hit "lowlevel: hangup".

I played a bit more, and now ofone can connect to GPRS. You'll need
version from git, see

https://gitorious.org/tui/tui/source/dff269a7ba419f573de5b90e8eea58227de8a9e6:ofone

Good luck,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Voice calls working on N900 (*) (was Re: N900 modem support in 3.18-rc1)

[Pavel Machek]

Hi!

(*) for low values of working.

Ok, so I got voice on n900 to work on 3.19-n900 tree.. Quality of incoming
voice is reasonable, quality of outgoing voice not so, I was told.

So, you need patched kernel (pali's n900 tree) ofono etc, plus I'm
using ofone python script to control the modem, plus you need
libcmtspeechdata. I have this version:

commit 7f8f3ce357513e4849e1bf6d657980a514529c1a
Author: Kai Vehmanen <kai.vehmanen@nokia.com>
Date:   Tue Mar 8 13:46:48 2011 +0200

    cmtspeech_msgs: fix compiler warning

    Add parenthesis to make the code more readable and to kill a
    compiler
        warning.

    Signed-off-by: Kai Vehmanen <kai.vehmanen@nokia.com>

Plus, apply the patch below. I could not get configure (etc) to work
for me, so I build it by hand. cmtspeech_ofono_test can then be used
to route the voice calls (if you feed it with audio data, see the
"run" script).

What is missing:

* right setup of mixers. (I was actually running audio data to my
desktop for some tests). What commandline tools can be used to set up
mixers? I'm using "alsamixer", but it has text ui...

* passing audio data using pipes is really a hack... and periodically
discarding audio data is certainly not a good idea.

Good luck,
								Pavel

diff --git a/mkit b/mkit
new file mode 100755
index 0000000..6fbd216
--- /dev/null
+++ b/mkit
@@ -0,0 +1,15 @@
+build_lib () {
+for a in test_cmtspeech test_cmtspeech_msgs test_ring; do
+    echo $a
+#    gcc cmtspeech_backend_common.c cmtspeech_msgs.c cmtspeech_nokiamodem.c sal_debug.c $a.c -I. -lrt -o $a
+done
+
+for a in cmtspeech_backend_common cmtspeech_msgs cmtspeech_nokiamodem sal_debug; do
+    gcc -fPIC $a.c -c -I. -o $a.o
+done
+ar rcs libcmtspeech.a cmtspeech_backend_common.o cmtspeech_msgs.o cmtspeech_nokiamodem.o sal_debug.o
+}
+
+# build_lib
+gcc -I . -I /usr/include/dbus-1.0/ -I /usr/lib/arm-linux-gnueabi/dbus-1.0/include/ utils/cmtspeech_ofono_test.c -lpthread -lrt libcmtspeech.a /usr/lib/arm-linux-gnueabi/libdbus-1.a -o cmtspeech_ofono_test
+
diff --git a/run b/run
new file mode 100755
index 0000000..8cb1f9a
--- /dev/null
+++ b/run
@@ -0,0 +1,2 @@
+#!/bin/bash
+parec --rate=4000 --latency-msec=100 | ./cmtspeech_ofono_test -a -v | pacat --rate=4000 --latency-msec=100
diff --git a/utils/cmtspeech_ofono_test.c b/utils/cmtspeech_ofono_test.c
index 4a6f080..ffb323f 100644
--- a/utils/cmtspeech_ofono_test.c
+++ b/utils/cmtspeech_ofono_test.c
@@ -48,6 +48,9 @@
 #include <cmtspeech.h>
 #include <dbus/dbus.h>
 
+#include <unistd.h>
+#include <fcntl.h>
+
 struct test_ctx {
   DBusConnection* dbus_conn;
   int dbus_fd;
@@ -55,6 +58,9 @@ struct test_ctx {
   bool call_server_status;
   int verbose;
   cmtspeech_t *cmtspeech;
+  int source_fd;
+  int sink_fd;
+  int data_through;
 };
 
 #define PREFIX "cmtspeech_ofono_test: "
@@ -75,7 +81,7 @@ static dbus_bool_t priv_add_cb(DBusWatch *watch, void *data)
   ctx->dbus_fd = fd;
   ctx->dbus_watch = watch;
 
-  DEBUG(printf(PREFIX "priv_add_cb: socket %d, watch %p (tracking %p).\n",
+  DEBUG(fprintf(stderr, PREFIX "priv_add_cb: socket %d, watch %p (tracking %p).\n",
 	       fd, watch, ctx->dbus_watch));
 
   return TRUE;
@@ -85,7 +91,7 @@ static void priv_remove_cb(DBusWatch *watch, void *data)
 {
   struct test_ctx *ctx = (struct test_ctx*)data;
 
-  DEBUG(printf(PREFIX "priv_remove_cb: (%p).\n", (void*)watch));
+  DEBUG(fprintf(stderr, PREFIX "priv_remove_cb: (%p).\n", (void*)watch));
 
   if (ctx->dbus_watch == watch) {
     ctx->dbus_watch = NULL;
@@ -99,7 +105,7 @@ static void priv_toggled_cb(DBusWatch *watch, void *data)
   dbus_bool_t enabled =
     dbus_watch_get_enabled(watch);
 
-  DEBUG(printf(PREFIX "priv_toggled_cb: (%p) enabled=%d.\n", (void*)watch, enabled));
+  DEBUG(fprintf(stderr, PREFIX "priv_toggled_cb: (%p) enabled=%d.\n", (void*)watch, enabled));
 
   if (ctx->dbus_watch == watch) {
     if (enabled == TRUE)
@@ -132,7 +138,7 @@ DBusConnection *test_dbus_make_connection(struct test_ctx *ctx, DBusBusType dbus
 
   conn = dbus_bus_get(dbus_type, &dbus_error);
   if (dbus_error_is_set(&dbus_error) != TRUE) {
-    DEBUG(printf(PREFIX "Connection established to DBus (%d).\n", (int)dbus_type));
+    DEBUG(fprintf(stderr, PREFIX "Connection established to DBus (%d).\n", (int)dbus_type));
   }
   else {
     fprintf(stderr, PREFIX "ERROR: unable to connect to DBus\n");
@@ -184,6 +190,24 @@ static void test_dbus_release(struct test_ctx *ctx)
   }
 }
 
+static void flush_input(struct test_ctx *ctx)
+{
+  char scratch[10240];
+  int total = 0;
+
+  fprintf(stderr, "Flushing input...\n");
+  if (!ctx->sink_fd)
+    return;
+  while(1) {
+    int num;
+    num = read(ctx->source_fd, scratch, 10240);
+    if (num == -1)
+      break;
+    total += num;
+  }
+  fprintf(stderr, "Flushing input (%d)\n", total);
+}
+
 static bool test_handle_dbus_ofono(struct test_ctx *ctx, DBusMessage *msg)
 {
   const char* property = NULL;
@@ -194,7 +218,7 @@ static bool test_handle_dbus_ofono(struct test_ctx *ctx, DBusMessage *msg)
     dbus_message_get_args(msg, &dbus_error,
 			  DBUS_TYPE_STRING, &property,
 			  DBUS_TYPE_INVALID);
-    DEBUG(printf(PREFIX "received ofono AudioSettings change, params name='%s'\n",
+    DEBUG(fprintf(stderr, PREFIX "received ofono AudioSettings change, params name='%s'\n",
 		 property));
     if (strcmp(property, "Active") == 0) {
       DBusMessageIter i;
@@ -213,7 +237,11 @@ static bool test_handle_dbus_ofono(struct test_ctx *ctx, DBusMessage *msg)
 	  dbus_message_iter_get_basic(&j, &state);
 
 	  if (state != old_state) {
-	    INFO(printf(PREFIX "org.ofono.AudioSettings.Active to %d.\n", state));
+	    INFO(fprintf(stderr, PREFIX "org.ofono.AudioSettings.Active to %d.\n", state));
+	    if (state == 1) {
+	      flush_input(ctx);
+	    }
+	      
 	    cmtspeech_state_change_call_status(ctx->cmtspeech, state);
 	    ctx->call_server_status = state;
 	  }
@@ -238,14 +266,14 @@ static int test_handle_dbus_message(struct test_ctx *ctx, DBusMessage *msg)
   int res = 0;
   const char* dbusif = dbus_message_get_interface(msg);
 
-  DEBUG(printf(PREFIX "got message to if:%s, member:%s.\n",
+  DEBUG(fprintf(stderr, PREFIX "got message to if:%s, member:%s.\n",
 	      dbusif, dbus_message_get_member(msg)));
 
   if (strstr(dbusif, "org.ofono.")) {
     test_handle_dbus_ofono(ctx, msg);
   }
   else
-    INFO(printf(PREFIX "unknown/ignored signal: if=%s, member=%s.\n",
+    INFO(fprintf(stderr, PREFIX "unknown/ignored signal: if=%s, member=%s.\n",
 		dbusif, dbus_message_get_member(msg)));
 
   return res;
@@ -280,6 +308,7 @@ static struct option const opt_tbl[] =
   {
     {"verbose",         0, NULL, 'v'},
     {"help",            0, NULL, 'h'},
+    {"audio",           0, NULL, 'a'},
     {NULL,              0, NULL, 0}
   };
 
@@ -297,13 +326,24 @@ static void priv_parse_options(struct test_ctx *ctx, int argc, char *argv[])
 
   assert(ctx);
 
-  while (res = getopt_long(argc, argv, "hv", opt_tbl, &opt_index), res != -1) {
+  while (res = getopt_long(argc, argv, "hva", opt_tbl, &opt_index), res != -1) {
     switch (res)
       {
 
       case 'v':
 	++ctx->verbose;
-	printf(PREFIX "Increasing verbosity to %d.\n", ctx->verbose);
+	fprintf(stderr, PREFIX "Increasing verbosity to %d.\n", ctx->verbose);
+	break;
+
+      case 'a':
+	fprintf(stderr, "Enabling audio path\n");
+	ctx->source_fd = 0;
+	ctx->sink_fd = 1;
+	ctx->data_through = 0;
+	{
+	  int flags = fcntl(ctx->source_fd, F_GETFL, 0);
+	  fcntl(ctx->source_fd, F_SETFL, flags | O_NONBLOCK);
+	}
 	break;
 
       case 'h':
@@ -317,16 +357,43 @@ static void priv_parse_options(struct test_ctx *ctx, int argc, char *argv[])
 static void test_handle_cmtspeech_data(struct test_ctx *ctx)
 {
   cmtspeech_buffer_t *dlbuf, *ulbuf;
+  char scratch[10240];
   int res = cmtspeech_dl_buffer_acquire(ctx->cmtspeech, &dlbuf);
   if (res == 0) {
-    DEBUG(printf(PREFIX "Received a DL packet (%u bytes).\n", dlbuf->count));
+    DEBUG(fprintf(stderr, PREFIX "Received a DL packet (%u bytes).\n", dlbuf->count));
     if (cmtspeech_protocol_state(ctx->cmtspeech) ==
 	CMTSPEECH_STATE_ACTIVE_DLUL) {
       res = cmtspeech_ul_buffer_acquire(ctx->cmtspeech, &ulbuf);
       if (res == 0) {
 	if (ulbuf->pcount >= dlbuf->pcount) {
-	  DEBUG(printf(PREFIX "Looping DL packet to UL (%u payload bytes).\n", dlbuf->pcount));
-	  memcpy(ulbuf->payload, dlbuf->payload, dlbuf->pcount);
+	  if (ctx->sink_fd) {
+	    int num;
+
+	    memset(ulbuf->payload, 0, ulbuf->pcount);
+	    num = read(ctx->source_fd, ulbuf->payload, ulbuf->pcount);
+	    if (num != dlbuf->pcount) {
+	      fprintf(stderr, "Not enough data on input (%d/%d)\n", num, dlbuf->pcount);
+	    }
+	    ctx->data_through += ulbuf->pcount;
+
+	    if (ctx->data_through > 100000) {
+	      ctx->data_through = 0;
+	      fprintf(stderr, "Draining input\n");
+	      while(1) {
+		num = read(ctx->source_fd, scratch, 10240);
+		fprintf(stderr, "Too much data on input (%d)\n", num);
+		if (num == -1)
+		  break;
+		if (num < 320)
+		  fprintf(stderr, "Too little to drain (%d)\n", num);
+	      }
+	    }
+
+	    write(ctx->sink_fd, dlbuf->payload, dlbuf->pcount);
+	  } else {
+	    DEBUG(fprintf(stderr, PREFIX "Looping DL packet to UL (%u payload bytes).\n", dlbuf->pcount));
+	    memcpy(ulbuf->payload, dlbuf->payload, dlbuf->pcount);
+	  }
 	}
 	cmtspeech_ul_buffer_release(ctx->cmtspeech, ulbuf);
       }
@@ -341,7 +408,7 @@ static int test_handle_cmtspeech_control(struct test_ctx *ctx)
   int state_tr = CMTSPEECH_TR_INVALID;
 
   cmtspeech_read_event(ctx->cmtspeech, &cmtevent);
-  DEBUG(printf(PREFIX "read cmtspeech event %d.\n", cmtevent.msg_type));
+  DEBUG(fprintf(stderr, PREFIX "read cmtspeech event %d.\n", cmtevent.msg_type));
 
   state_tr = cmtspeech_event_to_state_transition(ctx->cmtspeech, &cmtevent);
 
@@ -399,7 +466,7 @@ static int test_mainloop(struct test_ctx *ctx)
 
     pollres = poll(fds, count, -1);
 
-    DEBUG(printf("poll returned %d (count:%d, cmt:%02X, dbus:%02X)\n",
+    DEBUG(fprintf(stderr, "poll returned %d (count:%d, cmt:%02X, dbus:%02X)\n",
 		 pollres, count, fds[cmt].revents, fds[dbus].revents));
 
     if (pollres > 0) {
@@ -454,6 +521,7 @@ int main(int argc, char *argv[])
   struct test_ctx *ctx = &ctx0;
   int res = 0;
 
+  fprintf(stderr, "NFS sucks, version 0.0.1\n");
   priv_setup_signals();
 
   ctx->dbus_conn = NULL;
@@ -480,14 +548,14 @@ int main(int argc, char *argv[])
     return -1;
   }
 
-  INFO(printf(PREFIX "Setup succesful, entering mainloop.\n"));
+  INFO(fprintf(stderr, PREFIX "Setup succesful, entering mainloop.\n"));
 
   res = test_mainloop(ctx);
 
   cmtspeech_close(ctx->cmtspeech);
   test_dbus_release(ctx);
 
-  INFO(printf(PREFIX "Completed, exiting (%d).\n", res));
+  INFO(fprintf(stderr, PREFIX "Completed, exiting (%d).\n", res));
 
   return res;
 }

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Voice calls working on N900 (*) (was Re: N900 modem support in 3.18-rc1)

[Pavel Machek]

Hi!

(*) for low values of working.

Ok, so I got voice on n900 to work on 3.19-n900 tree.. Quality of incoming
voice is reasonable, quality of outgoing voice not so, I was told.

So, you need patched kernel (pali's n900 tree) ofono etc, plus I'm
using ofone python script to control the modem, plus you need
libcmtspeechdata. I have this version:

commit 7f8f3ce357513e4849e1bf6d657980a514529c1a
Author: Kai Vehmanen <kai.vehmanen@nokia.com>
Date:   Tue Mar 8 13:46:48 2011 +0200

    cmtspeech_msgs: fix compiler warning

    Add parenthesis to make the code more readable and to kill a
    compiler
        warning.

    Signed-off-by: Kai Vehmanen <kai.vehmanen@nokia.com>

Plus, apply the patch below. I could not get configure (etc) to work
for me, so I build it by hand. cmtspeech_ofono_test can then be used
to route the voice calls (if you feed it with audio data, see the
"run" script).

What is missing:

* right setup of mixers. (I was actually running audio data to my
desktop for some tests). What commandline tools can be used to set up
mixers? I'm using "alsamixer", but it has text ui...

* passing audio data using pipes is really a hack... and periodically
discarding audio data is certainly not a good idea.

Good luck,
								Pavel

diff --git a/mkit b/mkit
new file mode 100755
index 0000000..6fbd216
--- /dev/null
+++ b/mkit
@@ -0,0 +1,15 @@
+build_lib () {
+for a in test_cmtspeech test_cmtspeech_msgs test_ring; do
+    echo $a
+#    gcc cmtspeech_backend_common.c cmtspeech_msgs.c cmtspeech_nokiamodem.c sal_debug.c $a.c -I. -lrt -o $a
+done
+
+for a in cmtspeech_backend_common cmtspeech_msgs cmtspeech_nokiamodem sal_debug; do
+    gcc -fPIC $a.c -c -I. -o $a.o
+done
+ar rcs libcmtspeech.a cmtspeech_backend_common.o cmtspeech_msgs.o cmtspeech_nokiamodem.o sal_debug.o
+}
+
+# build_lib
+gcc -I . -I /usr/include/dbus-1.0/ -I /usr/lib/arm-linux-gnueabi/dbus-1.0/include/ utils/cmtspeech_ofono_test.c -lpthread -lrt libcmtspeech.a /usr/lib/arm-linux-gnueabi/libdbus-1.a -o cmtspeech_ofono_test
+
diff --git a/run b/run
new file mode 100755
index 0000000..8cb1f9a
--- /dev/null
+++ b/run
@@ -0,0 +1,2 @@
+#!/bin/bash
+parec --rate=4000 --latency-msec=100 | ./cmtspeech_ofono_test -a -v | pacat --rate=4000 --latency-msec=100
diff --git a/utils/cmtspeech_ofono_test.c b/utils/cmtspeech_ofono_test.c
index 4a6f080..ffb323f 100644
--- a/utils/cmtspeech_ofono_test.c
+++ b/utils/cmtspeech_ofono_test.c
@@ -48,6 +48,9 @@
 #include <cmtspeech.h>
 #include <dbus/dbus.h>
 
+#include <unistd.h>
+#include <fcntl.h>
+
 struct test_ctx {
   DBusConnection* dbus_conn;
   int dbus_fd;
@@ -55,6 +58,9 @@ struct test_ctx {
   bool call_server_status;
   int verbose;
   cmtspeech_t *cmtspeech;
+  int source_fd;
+  int sink_fd;
+  int data_through;
 };
 
 #define PREFIX "cmtspeech_ofono_test: "
@@ -75,7 +81,7 @@ static dbus_bool_t priv_add_cb(DBusWatch *watch, void *data)
   ctx->dbus_fd = fd;
   ctx->dbus_watch = watch;
 
-  DEBUG(printf(PREFIX "priv_add_cb: socket %d, watch %p (tracking %p).\n",
+  DEBUG(fprintf(stderr, PREFIX "priv_add_cb: socket %d, watch %p (tracking %p).\n",
 	       fd, watch, ctx->dbus_watch));
 
   return TRUE;
@@ -85,7 +91,7 @@ static void priv_remove_cb(DBusWatch *watch, void *data)
 {
   struct test_ctx *ctx = (struct test_ctx*)data;
 
-  DEBUG(printf(PREFIX "priv_remove_cb: (%p).\n", (void*)watch));
+  DEBUG(fprintf(stderr, PREFIX "priv_remove_cb: (%p).\n", (void*)watch));
 
   if (ctx->dbus_watch == watch) {
     ctx->dbus_watch = NULL;
@@ -99,7 +105,7 @@ static void priv_toggled_cb(DBusWatch *watch, void *data)
   dbus_bool_t enabled =
     dbus_watch_get_enabled(watch);
 
-  DEBUG(printf(PREFIX "priv_toggled_cb: (%p) enabled=%d.\n", (void*)watch, enabled));
+  DEBUG(fprintf(stderr, PREFIX "priv_toggled_cb: (%p) enabled=%d.\n", (void*)watch, enabled));
 
   if (ctx->dbus_watch == watch) {
     if (enabled == TRUE)
@@ -132,7 +138,7 @@ DBusConnection *test_dbus_make_connection(struct test_ctx *ctx, DBusBusType dbus
 
   conn = dbus_bus_get(dbus_type, &dbus_error);
   if (dbus_error_is_set(&dbus_error) != TRUE) {
-    DEBUG(printf(PREFIX "Connection established to DBus (%d).\n", (int)dbus_type));
+    DEBUG(fprintf(stderr, PREFIX "Connection established to DBus (%d).\n", (int)dbus_type));
   }
   else {
     fprintf(stderr, PREFIX "ERROR: unable to connect to DBus\n");
@@ -184,6 +190,24 @@ static void test_dbus_release(struct test_ctx *ctx)
   }
 }
 
+static void flush_input(struct test_ctx *ctx)
+{
+  char scratch[10240];
+  int total = 0;
+
+  fprintf(stderr, "Flushing input...\n");
+  if (!ctx->sink_fd)
+    return;
+  while(1) {
+    int num;
+    num = read(ctx->source_fd, scratch, 10240);
+    if (num == -1)
+      break;
+    total += num;
+  }
+  fprintf(stderr, "Flushing input (%d)\n", total);
+}
+
 static bool test_handle_dbus_ofono(struct test_ctx *ctx, DBusMessage *msg)
 {
   const char* property = NULL;
@@ -194,7 +218,7 @@ static bool test_handle_dbus_ofono(struct test_ctx *ctx, DBusMessage *msg)
     dbus_message_get_args(msg, &dbus_error,
 			  DBUS_TYPE_STRING, &property,
 			  DBUS_TYPE_INVALID);
-    DEBUG(printf(PREFIX "received ofono AudioSettings change, params name='%s'\n",
+    DEBUG(fprintf(stderr, PREFIX "received ofono AudioSettings change, params name='%s'\n",
 		 property));
     if (strcmp(property, "Active") == 0) {
       DBusMessageIter i;
@@ -213,7 +237,11 @@ static bool test_handle_dbus_ofono(struct test_ctx *ctx, DBusMessage *msg)
 	  dbus_message_iter_get_basic(&j, &state);
 
 	  if (state != old_state) {
-	    INFO(printf(PREFIX "org.ofono.AudioSettings.Active to %d.\n", state));
+	    INFO(fprintf(stderr, PREFIX "org.ofono.AudioSettings.Active to %d.\n", state));
+	    if (state == 1) {
+	      flush_input(ctx);
+	    }
+	      
 	    cmtspeech_state_change_call_status(ctx->cmtspeech, state);
 	    ctx->call_server_status = state;
 	  }
@@ -238,14 +266,14 @@ static int test_handle_dbus_message(struct test_ctx *ctx, DBusMessage *msg)
   int res = 0;
   const char* dbusif = dbus_message_get_interface(msg);
 
-  DEBUG(printf(PREFIX "got message to if:%s, member:%s.\n",
+  DEBUG(fprintf(stderr, PREFIX "got message to if:%s, member:%s.\n",
 	      dbusif, dbus_message_get_member(msg)));
 
   if (strstr(dbusif, "org.ofono.")) {
     test_handle_dbus_ofono(ctx, msg);
   }
   else
-    INFO(printf(PREFIX "unknown/ignored signal: if=%s, member=%s.\n",
+    INFO(fprintf(stderr, PREFIX "unknown/ignored signal: if=%s, member=%s.\n",
 		dbusif, dbus_message_get_member(msg)));
 
   return res;
@@ -280,6 +308,7 @@ static struct option const opt_tbl[] =
   {
     {"verbose",         0, NULL, 'v'},
     {"help",            0, NULL, 'h'},
+    {"audio",           0, NULL, 'a'},
     {NULL,              0, NULL, 0}
   };
 
@@ -297,13 +326,24 @@ static void priv_parse_options(struct test_ctx *ctx, int argc, char *argv[])
 
   assert(ctx);
 
-  while (res = getopt_long(argc, argv, "hv", opt_tbl, &opt_index), res != -1) {
+  while (res = getopt_long(argc, argv, "hva", opt_tbl, &opt_index), res != -1) {
     switch (res)
       {
 
       case 'v':
 	++ctx->verbose;
-	printf(PREFIX "Increasing verbosity to %d.\n", ctx->verbose);
+	fprintf(stderr, PREFIX "Increasing verbosity to %d.\n", ctx->verbose);
+	break;
+
+      case 'a':
+	fprintf(stderr, "Enabling audio path\n");
+	ctx->source_fd = 0;
+	ctx->sink_fd = 1;
+	ctx->data_through = 0;
+	{
+	  int flags = fcntl(ctx->source_fd, F_GETFL, 0);
+	  fcntl(ctx->source_fd, F_SETFL, flags | O_NONBLOCK);
+	}
 	break;
 
       case 'h':
@@ -317,16 +357,43 @@ static void priv_parse_options(struct test_ctx *ctx, int argc, char *argv[])
 static void test_handle_cmtspeech_data(struct test_ctx *ctx)
 {
   cmtspeech_buffer_t *dlbuf, *ulbuf;
+  char scratch[10240];
   int res = cmtspeech_dl_buffer_acquire(ctx->cmtspeech, &dlbuf);
   if (res == 0) {
-    DEBUG(printf(PREFIX "Received a DL packet (%u bytes).\n", dlbuf->count));
+    DEBUG(fprintf(stderr, PREFIX "Received a DL packet (%u bytes).\n", dlbuf->count));
     if (cmtspeech_protocol_state(ctx->cmtspeech) ==
 	CMTSPEECH_STATE_ACTIVE_DLUL) {
       res = cmtspeech_ul_buffer_acquire(ctx->cmtspeech, &ulbuf);
       if (res == 0) {
 	if (ulbuf->pcount >= dlbuf->pcount) {
-	  DEBUG(printf(PREFIX "Looping DL packet to UL (%u payload bytes).\n", dlbuf->pcount));
-	  memcpy(ulbuf->payload, dlbuf->payload, dlbuf->pcount);
+	  if (ctx->sink_fd) {
+	    int num;
+
+	    memset(ulbuf->payload, 0, ulbuf->pcount);
+	    num = read(ctx->source_fd, ulbuf->payload, ulbuf->pcount);
+	    if (num != dlbuf->pcount) {
+	      fprintf(stderr, "Not enough data on input (%d/%d)\n", num, dlbuf->pcount);
+	    }
+	    ctx->data_through += ulbuf->pcount;
+
+	    if (ctx->data_through > 100000) {
+	      ctx->data_through = 0;
+	      fprintf(stderr, "Draining input\n");
+	      while(1) {
+		num = read(ctx->source_fd, scratch, 10240);
+		fprintf(stderr, "Too much data on input (%d)\n", num);
+		if (num == -1)
+		  break;
+		if (num < 320)
+		  fprintf(stderr, "Too little to drain (%d)\n", num);
+	      }
+	    }
+
+	    write(ctx->sink_fd, dlbuf->payload, dlbuf->pcount);
+	  } else {
+	    DEBUG(fprintf(stderr, PREFIX "Looping DL packet to UL (%u payload bytes).\n", dlbuf->pcount));
+	    memcpy(ulbuf->payload, dlbuf->payload, dlbuf->pcount);
+	  }
 	}
 	cmtspeech_ul_buffer_release(ctx->cmtspeech, ulbuf);
       }
@@ -341,7 +408,7 @@ static int test_handle_cmtspeech_control(struct test_ctx *ctx)
   int state_tr = CMTSPEECH_TR_INVALID;
 
   cmtspeech_read_event(ctx->cmtspeech, &cmtevent);
-  DEBUG(printf(PREFIX "read cmtspeech event %d.\n", cmtevent.msg_type));
+  DEBUG(fprintf(stderr, PREFIX "read cmtspeech event %d.\n", cmtevent.msg_type));
 
   state_tr = cmtspeech_event_to_state_transition(ctx->cmtspeech, &cmtevent);
 
@@ -399,7 +466,7 @@ static int test_mainloop(struct test_ctx *ctx)
 
     pollres = poll(fds, count, -1);
 
-    DEBUG(printf("poll returned %d (count:%d, cmt:%02X, dbus:%02X)\n",
+    DEBUG(fprintf(stderr, "poll returned %d (count:%d, cmt:%02X, dbus:%02X)\n",
 		 pollres, count, fds[cmt].revents, fds[dbus].revents));
 
     if (pollres > 0) {
@@ -454,6 +521,7 @@ int main(int argc, char *argv[])
   struct test_ctx *ctx = &ctx0;
   int res = 0;
 
+  fprintf(stderr, "NFS sucks, version 0.0.1\n");
   priv_setup_signals();
 
   ctx->dbus_conn = NULL;
@@ -480,14 +548,14 @@ int main(int argc, char *argv[])
     return -1;
   }
 
-  INFO(printf(PREFIX "Setup succesful, entering mainloop.\n"));
+  INFO(fprintf(stderr, PREFIX "Setup succesful, entering mainloop.\n"));
 
   res = test_mainloop(ctx);
 
   cmtspeech_close(ctx->cmtspeech);
   test_dbus_release(ctx);
 
-  INFO(printf(PREFIX "Completed, exiting (%d).\n", res));
+  INFO(fprintf(stderr, PREFIX "Completed, exiting (%d).\n", res));
 
   return res;
 }

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: Voice calls working on N900 (*) (was Re: N900 modem support in 3.18-rc1)

[Pavel Machek]

Hi!

> (*) for low values of working.
> 
> Ok, so I got voice on n900 to work on 3.19-n900 tree.. Quality of incoming
> voice is reasonable, quality of outgoing voice not so, I was told.
> 
> So, you need patched kernel (pali's n900 tree) ofono etc, plus I'm
> using ofone python script to control the modem, plus you need
> libcmtspeechdata. I have this version:

I put libcmtspeechdata at gitorious:

git@gitorious.org:libcmtspeechdata/libcmtspeechdata.git

ofone control scripts are at:

git@gitorious.org:tui/tui.git

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Voice calls working on N900 (*) (was Re: N900 modem support in 3.18-rc1)

[Pavel Machek]

Hi!

> (*) for low values of working.
> 
> Ok, so I got voice on n900 to work on 3.19-n900 tree.. Quality of incoming
> voice is reasonable, quality of outgoing voice not so, I was told.
> 
> So, you need patched kernel (pali's n900 tree) ofono etc, plus I'm
> using ofone python script to control the modem, plus you need
> libcmtspeechdata. I have this version:

I put libcmtspeechdata at gitorious:

git at gitorious.org:libcmtspeechdata/libcmtspeechdata.git

ofone control scripts are at:

git at gitorious.org:tui/tui.git

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html