All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, maxime.coquelin@st.com
Cc: kernel@stlinux.com, broonie@kernel.org,
	linux-spi@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 3/4] ARM: sti: Provide DT nodes for SSC[0..4]
Date: Wed, 21 Jan 2015 16:22:43 +0000	[thread overview]
Message-ID: <20150121162243.GG22024@x1> (raw)
In-Reply-To: <1417534844-25080-4-git-send-email-lee.jones@linaro.org>

Maxime,

Can you ping these up please?

> The Synchronous Serial Controller is used to provide SPI.
> 
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  arch/arm/boot/dts/stih407.dtsi | 54 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 50637f5..90bc090 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -275,5 +275,59 @@
>  
>  			status = "disabled";
>  		};
> +
> +		spi@9840000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9840000 0x110>;
> +			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			pinctrl-0 = <&pinctrl_spi0_default>;
> +			pinctrl-names = "default";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9841000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9841000 0x110>;
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9842000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9842000 0x110>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9843000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9843000 0x110>;
> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9844000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9844000 0x110>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	maxime.coquelin-qxv4g6HH51o@public.gmane.org
Cc: kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v2 3/4] ARM: sti: Provide DT nodes for SSC[0..4]
Date: Wed, 21 Jan 2015 16:22:43 +0000	[thread overview]
Message-ID: <20150121162243.GG22024@x1> (raw)
In-Reply-To: <1417534844-25080-4-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Maxime,

Can you ping these up please?

> The Synchronous Serial Controller is used to provide SPI.
> 
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  arch/arm/boot/dts/stih407.dtsi | 54 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 50637f5..90bc090 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -275,5 +275,59 @@
>  
>  			status = "disabled";
>  		};
> +
> +		spi@9840000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9840000 0x110>;
> +			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			pinctrl-0 = <&pinctrl_spi0_default>;
> +			pinctrl-names = "default";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9841000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9841000 0x110>;
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9842000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9842000 0x110>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9843000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9843000 0x110>;
> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi@9844000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9844000 0x110>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] ARM: sti: Provide DT nodes for SSC[0..4]
Date: Wed, 21 Jan 2015 16:22:43 +0000	[thread overview]
Message-ID: <20150121162243.GG22024@x1> (raw)
In-Reply-To: <1417534844-25080-4-git-send-email-lee.jones@linaro.org>

Maxime,

Can you ping these up please?

> The Synchronous Serial Controller is used to provide SPI.
> 
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  arch/arm/boot/dts/stih407.dtsi | 54 ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 50637f5..90bc090 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -275,5 +275,59 @@
>  
>  			status = "disabled";
>  		};
> +
> +		spi at 9840000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9840000 0x110>;
> +			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +			pinctrl-0 = <&pinctrl_spi0_default>;
> +			pinctrl-names = "default";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		spi at 9841000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9841000 0x110>;
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi at 9842000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9842000 0x110>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi at 9843000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9843000 0x110>;
> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
> +
> +		spi at 9844000 {
> +			compatible = "st,comms-ssc4-spi";
> +			reg = <0x9844000 0x110>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
> +			clock-names = "ssc";
> +
> +			status = "disabled";
> +		};
>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-01-21 16:23 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-02 15:40 [PATCH v2 0/4] spi: st: New driver for ST's SPI Controller Lee Jones
2014-12-02 15:40 ` Lee Jones
2014-12-02 15:40 ` Lee Jones
2014-12-02 15:40 ` [PATCH v2 1/4] spi: Add new driver for STMicroelectronics' " Lee Jones
2014-12-02 15:40   ` Lee Jones
2014-12-02 16:16   ` [STLinux Kernel] " Patrice Chotard
2014-12-02 16:16     ` Patrice Chotard
2014-12-02 16:16     ` Patrice Chotard
2014-12-02 16:16     ` Patrice Chotard
2014-12-03  9:17     ` Lee Jones
2014-12-03  9:17       ` Lee Jones
2014-12-04 22:41       ` Mark Brown
2014-12-04 22:41         ` Mark Brown
2014-12-04 22:41         ` Mark Brown
2014-12-05 17:19   ` Mark Brown
2014-12-05 17:19     ` Mark Brown
2014-12-02 15:40 ` [PATCH v2 2/4] spi: st: Provide Device Tree binding documentation Lee Jones
2014-12-02 15:40   ` Lee Jones
2014-12-02 15:40   ` Lee Jones
2014-12-05 17:19   ` Mark Brown
2014-12-05 17:19     ` Mark Brown
2014-12-02 15:40 ` [PATCH v2 3/4] ARM: sti: Provide DT nodes for SSC[0..4] Lee Jones
2014-12-02 15:40   ` Lee Jones
2015-01-21 16:22   ` Lee Jones [this message]
2015-01-21 16:22     ` Lee Jones
2015-01-21 16:22     ` Lee Jones
2014-12-02 15:40 ` [PATCH v2 4/4] ARM: sti: Provide DT nodes for SBC SSC[0..2] Lee Jones
2014-12-02 15:40   ` Lee Jones
2015-01-21 16:23   ` Lee Jones
2015-01-21 16:23     ` Lee Jones
2015-01-21 16:23     ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150121162243.GG22024@x1 \
    --to=lee.jones@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@stlinux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=maxime.coquelin@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.