All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: Lars-Peter Clausen <lars@metafoo.de>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	alsa-devel@alsa-project.org
Subject: Re: [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
Date: Tue, 27 Jan 2015 00:58:09 +0000	[thread overview]
Message-ID: <20150127005808.GB29710@verge.net.au> (raw)
In-Reply-To: <1421847492-8857-1-git-send-email-lars@metafoo.de>

On Wed, Jan 21, 2015 at 02:38:10PM +0100, Lars-Peter Clausen wrote:
> The DAI link format should be specified for the whole link rather than just
> one component on the link. So move the format specification for the HDMI
> audio link from the CPU component to the link itself.
> 
> Since the sh-mobile-hdmi DAI driver doesn't implement the set_fmt() callback
> in this case there is no functional difference between only specifying the
> the format for the CPU side or for the whole link, but the later it will
> allow us to remove support for just specifying the format for one component.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
> No changes since v1.

Morimoto-san,

could you provide a review of this patch?

> ---
>  arch/arm/mach-shmobile/board-armadillo800eva.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 6d949f1..75de26c 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1040,9 +1040,9 @@ static struct asoc_simple_card_info fsi2_hdmi_info = {
>  	.card		= "FSI2B-HDMI",
>  	.codec		= "sh-mobile-hdmi",
>  	.platform	= "sh_fsi2",
> +	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
>  	.cpu_dai = {
>  		.name	= "fsib-dai",
> -		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
>  	},
>  	.codec_dai = {
>  		.name = "sh_mobile_hdmi-hifi",
> -- 
> 1.8.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

WARNING: multiple messages have this Message-ID (diff)
From: Simon Horman <horms@verge.net.au>
To: Lars-Peter Clausen <lars@metafoo.de>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	alsa-devel@alsa-project.org
Subject: Re: [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
Date: Tue, 27 Jan 2015 09:58:09 +0900	[thread overview]
Message-ID: <20150127005808.GB29710@verge.net.au> (raw)
In-Reply-To: <1421847492-8857-1-git-send-email-lars@metafoo.de>

On Wed, Jan 21, 2015 at 02:38:10PM +0100, Lars-Peter Clausen wrote:
> The DAI link format should be specified for the whole link rather than just
> one component on the link. So move the format specification for the HDMI
> audio link from the CPU component to the link itself.
> 
> Since the sh-mobile-hdmi DAI driver doesn't implement the set_fmt() callback
> in this case there is no functional difference between only specifying the
> the format for the CPU side or for the whole link, but the later it will
> allow us to remove support for just specifying the format for one component.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
> No changes since v1.

Morimoto-san,

could you provide a review of this patch?

> ---
>  arch/arm/mach-shmobile/board-armadillo800eva.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 6d949f1..75de26c 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1040,9 +1040,9 @@ static struct asoc_simple_card_info fsi2_hdmi_info = {
>  	.card		= "FSI2B-HDMI",
>  	.codec		= "sh-mobile-hdmi",
>  	.platform	= "sh_fsi2",
> +	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
>  	.cpu_dai = {
>  		.name	= "fsib-dai",
> -		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
>  	},
>  	.codec_dai = {
>  		.name = "sh_mobile_hdmi-hifi",
> -- 
> 1.8.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
Date: Tue, 27 Jan 2015 09:58:09 +0900	[thread overview]
Message-ID: <20150127005808.GB29710@verge.net.au> (raw)
In-Reply-To: <1421847492-8857-1-git-send-email-lars@metafoo.de>

On Wed, Jan 21, 2015 at 02:38:10PM +0100, Lars-Peter Clausen wrote:
> The DAI link format should be specified for the whole link rather than just
> one component on the link. So move the format specification for the HDMI
> audio link from the CPU component to the link itself.
> 
> Since the sh-mobile-hdmi DAI driver doesn't implement the set_fmt() callback
> in this case there is no functional difference between only specifying the
> the format for the CPU side or for the whole link, but the later it will
> allow us to remove support for just specifying the format for one component.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
> No changes since v1.

Morimoto-san,

could you provide a review of this patch?

> ---
>  arch/arm/mach-shmobile/board-armadillo800eva.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 6d949f1..75de26c 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1040,9 +1040,9 @@ static struct asoc_simple_card_info fsi2_hdmi_info = {
>  	.card		= "FSI2B-HDMI",
>  	.codec		= "sh-mobile-hdmi",
>  	.platform	= "sh_fsi2",
> +	.daifmt		= SND_SOC_DAIFMT_CBS_CFS,
>  	.cpu_dai = {
>  		.name	= "fsib-dai",
> -		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
>  	},
>  	.codec_dai = {
>  		.name = "sh_mobile_hdmi-hifi",
> -- 
> 1.8.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

  parent reply	other threads:[~2015-01-27  0:58 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-21 13:38 [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2015-01-21 13:38 ` [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion Lars-Peter Clausen
2015-01-21 13:38   ` Lars-Peter Clausen
2015-01-21 13:38   ` Lars-Peter Clausen
2016-01-29 15:52   ` Geert Uytterhoeven
2016-01-29 15:52     ` Geert Uytterhoeven
2015-01-21 13:38 ` [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats Lars-Peter Clausen
2015-01-21 13:38   ` Lars-Peter Clausen
2015-01-21 13:38   ` Lars-Peter Clausen
2015-01-27  0:58 ` Simon Horman [this message]
2015-01-27  0:58   ` [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Simon Horman
2015-01-27  0:58   ` Simon Horman
2015-01-27  7:40 ` Kuninori Morimoto
2015-01-27  7:40   ` Kuninori Morimoto
2015-01-27  7:40   ` Kuninori Morimoto
2015-01-27  8:19   ` Lars-Peter Clausen
2015-01-27  8:19     ` Lars-Peter Clausen
2015-01-27  8:19     ` Lars-Peter Clausen
2015-01-27 23:52     ` Kuninori Morimoto
2015-01-27 23:52       ` Kuninori Morimoto
2015-01-27 23:52       ` Kuninori Morimoto
2015-01-30  1:25       ` Simon Horman
2015-01-30  1:25         ` Simon Horman
2015-01-30  1:25         ` Simon Horman
2015-01-30  5:18 ` Kuninori Morimoto
2015-01-30  5:18   ` Kuninori Morimoto
2015-02-11  0:28   ` Simon Horman
2015-02-11  0:28     ` Simon Horman
2015-02-11  0:28     ` Simon Horman
2015-02-27  0:23     ` Kuninori Morimoto
2015-02-27  0:23       ` Kuninori Morimoto
2015-03-22 18:52       ` Mark Brown
2015-03-22 18:52         ` Mark Brown
2015-03-23  7:00         ` Kuninori Morimoto
2015-03-23  7:00           ` Kuninori Morimoto
2015-03-23 21:12           ` Mark Brown
2015-03-23 21:12             ` Mark Brown
2015-03-23 21:12             ` Mark Brown
2015-03-24  0:07             ` Kuninori Morimoto
2015-03-24  0:07               ` Kuninori Morimoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150127005808.GB29710@verge.net.au \
    --to=horms@verge.net.au \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.