* [PULL patches for 3.20]: New gspca touptek driver, gspca fixes and sunxi-cir driver improvments
@ 2015-01-15 10:52 Hans de Goede
2015-01-29 20:36 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 4+ messages in thread
From: Hans de Goede @ 2015-01-15 10:52 UTC (permalink / raw)
To: Linux Media Mailing List; +Cc: John McMaster, Maxime Ripard
Hi Mauro,
Note this pull-req superseeds my previous pull-req for 3.20 .
Please pull from my tree for a new gspca touptek driver, various
gspca fixes and some sunxi-cir driver improvments.
The following changes since commit 99f3cd52aee21091ce62442285a68873e3be833f:
[media] vb2-vmalloc: Protect DMA-specific code by #ifdef CONFIG_HAS_DMA (2014-12-23 16:28:09 -0200)
are available in the git repository at:
git://linuxtv.org/hgoede/gspca.git media-for_v3.20
for you to fetch changes up to e6a734195e2fbd9386aa58fe8931dd30c013f23e:
gspca: Fix underflow in vidioc_s_parm() (2015-01-15 11:46:17 +0100)
----------------------------------------------------------------
Antonio Ospite (1):
gspca_stv06xx: enable button found on some Quickcam Express variant
Hans Verkuil (1):
pwc: fix WARN_ON
Hans de Goede (3):
rc: sunxi-cir: Add support for an optional reset controller
rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
gspca: Fix underflow in vidioc_s_parm()
Joe Howse (1):
gspca: Add high-speed modes for PS3 Eye camera
John McMaster (1):
gspca_touptek: Add support for ToupTek UCMOS series USB cameras
.../devicetree/bindings/media/sunxi-ir.txt | 4 +-
drivers/media/rc/sunxi-cir.c | 46 +-
drivers/media/usb/gspca/Kconfig | 10 +
drivers/media/usb/gspca/Makefile | 2 +
drivers/media/usb/gspca/gspca.c | 2 +-
drivers/media/usb/gspca/ov534.c | 10 +-
drivers/media/usb/gspca/stv06xx/stv06xx.c | 4 +-
drivers/media/usb/gspca/touptek.c | 732 +++++++++++++++++++++
drivers/media/usb/pwc/pwc-if.c | 12 +-
9 files changed, 800 insertions(+), 22 deletions(-)
create mode 100644 drivers/media/usb/gspca/touptek.c
Thanks & Regards,
Hans
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PULL patches for 3.20]: New gspca touptek driver, gspca fixes and sunxi-cir driver improvments
2015-01-15 10:52 [PULL patches for 3.20]: New gspca touptek driver, gspca fixes and sunxi-cir driver improvments Hans de Goede
@ 2015-01-29 20:36 ` Mauro Carvalho Chehab
2015-01-31 16:32 ` Hans de Goede
0 siblings, 1 reply; 4+ messages in thread
From: Mauro Carvalho Chehab @ 2015-01-29 20:36 UTC (permalink / raw)
To: Hans de Goede; +Cc: Linux Media Mailing List, John McMaster, Maxime Ripard
Em Thu, 15 Jan 2015 11:52:14 +0100
Hans de Goede <hdegoede@redhat.com> escreveu:
> Hi Mauro,
>
> Note this pull-req superseeds my previous pull-req for 3.20 .
Hmm... I ended by applying the previous pull request. I was unable to see
what's new on this one. Please check if everything went fine.
Thanks!
Mauro
>
> Please pull from my tree for a new gspca touptek driver, various
> gspca fixes and some sunxi-cir driver improvments.
>
> The following changes since commit 99f3cd52aee21091ce62442285a68873e3be833f:
>
> [media] vb2-vmalloc: Protect DMA-specific code by #ifdef CONFIG_HAS_DMA (2014-12-23 16:28:09 -0200)
>
> are available in the git repository at:
>
> git://linuxtv.org/hgoede/gspca.git media-for_v3.20
>
> for you to fetch changes up to e6a734195e2fbd9386aa58fe8931dd30c013f23e:
>
> gspca: Fix underflow in vidioc_s_parm() (2015-01-15 11:46:17 +0100)
>
> ----------------------------------------------------------------
> Antonio Ospite (1):
> gspca_stv06xx: enable button found on some Quickcam Express variant
>
> Hans Verkuil (1):
> pwc: fix WARN_ON
>
> Hans de Goede (3):
> rc: sunxi-cir: Add support for an optional reset controller
> rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
> gspca: Fix underflow in vidioc_s_parm()
>
> Joe Howse (1):
> gspca: Add high-speed modes for PS3 Eye camera
>
> John McMaster (1):
> gspca_touptek: Add support for ToupTek UCMOS series USB cameras
>
> .../devicetree/bindings/media/sunxi-ir.txt | 4 +-
> drivers/media/rc/sunxi-cir.c | 46 +-
> drivers/media/usb/gspca/Kconfig | 10 +
> drivers/media/usb/gspca/Makefile | 2 +
> drivers/media/usb/gspca/gspca.c | 2 +-
> drivers/media/usb/gspca/ov534.c | 10 +-
> drivers/media/usb/gspca/stv06xx/stv06xx.c | 4 +-
> drivers/media/usb/gspca/touptek.c | 732 +++++++++++++++++++++
> drivers/media/usb/pwc/pwc-if.c | 12 +-
> 9 files changed, 800 insertions(+), 22 deletions(-)
> create mode 100644 drivers/media/usb/gspca/touptek.c
>
> Thanks & Regards,
>
> Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PULL patches for 3.20]: New gspca touptek driver, gspca fixes and sunxi-cir driver improvments
2015-01-29 20:36 ` Mauro Carvalho Chehab
@ 2015-01-31 16:32 ` Hans de Goede
0 siblings, 0 replies; 4+ messages in thread
From: Hans de Goede @ 2015-01-31 16:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Media Mailing List, John McMaster, Maxime Ripard
Hi,
On 01/29/2015 09:36 PM, Mauro Carvalho Chehab wrote:
> Em Thu, 15 Jan 2015 11:52:14 +0100
> Hans de Goede <hdegoede@redhat.com> escreveu:
>
>> Hi Mauro,
>>
>> Note this pull-req superseeds my previous pull-req for 3.20 .
>
> Hmm... I ended by applying the previous pull request. I was unable to see
> what's new on this one. Please check if everything went fine.
I used the same branch for both, so everything went fine.
Thanks,
Hans
>
> Thanks!
> Mauro
>
>>
>> Please pull from my tree for a new gspca touptek driver, various
>> gspca fixes and some sunxi-cir driver improvments.
>>
>> The following changes since commit 99f3cd52aee21091ce62442285a68873e3be833f:
>>
>> [media] vb2-vmalloc: Protect DMA-specific code by #ifdef CONFIG_HAS_DMA (2014-12-23 16:28:09 -0200)
>>
>> are available in the git repository at:
>>
>> git://linuxtv.org/hgoede/gspca.git media-for_v3.20
>>
>> for you to fetch changes up to e6a734195e2fbd9386aa58fe8931dd30c013f23e:
>>
>> gspca: Fix underflow in vidioc_s_parm() (2015-01-15 11:46:17 +0100)
>>
>> ----------------------------------------------------------------
>> Antonio Ospite (1):
>> gspca_stv06xx: enable button found on some Quickcam Express variant
>>
>> Hans Verkuil (1):
>> pwc: fix WARN_ON
>>
>> Hans de Goede (3):
>> rc: sunxi-cir: Add support for an optional reset controller
>> rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
>> gspca: Fix underflow in vidioc_s_parm()
>>
>> Joe Howse (1):
>> gspca: Add high-speed modes for PS3 Eye camera
>>
>> John McMaster (1):
>> gspca_touptek: Add support for ToupTek UCMOS series USB cameras
>>
>> .../devicetree/bindings/media/sunxi-ir.txt | 4 +-
>> drivers/media/rc/sunxi-cir.c | 46 +-
>> drivers/media/usb/gspca/Kconfig | 10 +
>> drivers/media/usb/gspca/Makefile | 2 +
>> drivers/media/usb/gspca/gspca.c | 2 +-
>> drivers/media/usb/gspca/ov534.c | 10 +-
>> drivers/media/usb/gspca/stv06xx/stv06xx.c | 4 +-
>> drivers/media/usb/gspca/touptek.c | 732 +++++++++++++++++++++
>> drivers/media/usb/pwc/pwc-if.c | 12 +-
>> 9 files changed, 800 insertions(+), 22 deletions(-)
>> create mode 100644 drivers/media/usb/gspca/touptek.c
>>
>> Thanks & Regards,
>>
>> Hans
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PULL patches for 3.20]: New gspca touptek driver, gspca fixes and sunxi-cir driver improvments
@ 2015-01-28 8:11 Hans de Goede
0 siblings, 0 replies; 4+ messages in thread
From: Hans de Goede @ 2015-01-28 8:11 UTC (permalink / raw)
To: Linux Media Mailing List
Cc: John McMaster, Maxime Ripard, Mauro Carvalho Chehab
Hi Mauro,
Note this pull-req superseeds my previous pull-req for 3.20, and
now includes one more gspca bugfix.
Please pull from my tree for a new gspca touptek driver, various
gspca fixes and some sunxi-cir driver improvments.
The following changes since commit 8d44aeefcd79e9be3b6db4f37efc7544995b619e:
[media] rtl28xxu: change module unregister order (2015-01-27 10:57:58 -0200)
are available in the git repository at:
git://linuxtv.org/hgoede/gspca.git media-for_v3.20
for you to fetch changes up to 161afd98bd7bff0456cef6fc79b9f0909d244f5e:
gspca_vc032x: Fix wrong bytesperline (2015-01-28 09:06:50 +0100)
----------------------------------------------------------------
Antonio Ospite (1):
gspca_stv06xx: enable button found on some Quickcam Express variant
Hans Verkuil (1):
pwc: fix WARN_ON
Hans de Goede (3):
rc: sunxi-cir: Add support for an optional reset controller
rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
gspca: Fix underflow in vidioc_s_parm()
Joe Howse (1):
gspca: Add high-speed modes for PS3 Eye camera
John McMaster (1):
gspca_touptek: Add support for ToupTek UCMOS series USB cameras
Luca Bonissi (1):
gspca_vc032x: Fix wrong bytesperline
.../devicetree/bindings/media/sunxi-ir.txt | 4 +-
drivers/media/rc/sunxi-cir.c | 46 +-
drivers/media/usb/gspca/Kconfig | 10 +
drivers/media/usb/gspca/Makefile | 2 +
drivers/media/usb/gspca/gspca.c | 2 +-
drivers/media/usb/gspca/ov534.c | 10 +-
drivers/media/usb/gspca/stv06xx/stv06xx.c | 4 +-
drivers/media/usb/gspca/touptek.c | 732 +++++++++++++++++++++
drivers/media/usb/gspca/vc032x.c | 10 +-
drivers/media/usb/pwc/pwc-if.c | 12 +-
10 files changed, 805 insertions(+), 27 deletions(-)
create mode 100644 drivers/media/usb/gspca/touptek.c
Thanks & Regards,
Hans
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-01-31 16:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-15 10:52 [PULL patches for 3.20]: New gspca touptek driver, gspca fixes and sunxi-cir driver improvments Hans de Goede
2015-01-29 20:36 ` Mauro Carvalho Chehab
2015-01-31 16:32 ` Hans de Goede
2015-01-28 8:11 Hans de Goede
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.