* [U-Boot] Please pull u-boot-marvell master
@ 2015-02-16 12:50 Luka Perkov
2015-02-16 17:41 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-02-16 12:50 UTC (permalink / raw)
To: u-boot
Hi Tom,
this series contains kirkwood patches from Michael. Please pull them
when you find the time.
The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f:
sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 43730ba72c176ffc4d9858249475f458203d9757:
lsxl: add a README file (2015-02-16 11:44:59 +0100)
----------------------------------------------------------------
Michael Walle (4):
lsxl: use default load addresses for legacy boot
lsxl: place the dtb below the inital ramdisk
lsxl: switch from bootm to bootz for boot commands
lsxl: add a README file
board/buffalo/lsxl/README | 139 ++++++++++++++++++++++++++++++++++++++++++++++
include/configs/lsxl.h | 42 ++++++++------
2 files changed, 164 insertions(+), 17 deletions(-)
create mode 100644 board/buffalo/lsxl/README
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-02-16 12:50 [U-Boot] Please pull u-boot-marvell master Luka Perkov
@ 2015-02-16 17:41 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-02-16 17:41 UTC (permalink / raw)
To: u-boot
On Mon, Feb 16, 2015 at 12:50:30PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> this series contains kirkwood patches from Michael. Please pull them
> when you find the time.
>
> The following changes since commit bd2a4888b123713adec271d6c8040ca9f609aa2f:
>
> sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART (2015-02-11 19:43:45 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 43730ba72c176ffc4d9858249475f458203d9757:
>
> lsxl: add a README file (2015-02-16 11:44:59 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150216/55a8f399/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-11-29 21:20 Luka Perkov
@ 2015-11-30 20:17 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-11-30 20:17 UTC (permalink / raw)
To: u-boot
On Sun, Nov 29, 2015 at 09:20:05PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> please pull the queued changes below from Marvell tree. Additional work from
> Stefan will be sent later on.
>
> The following changes since commit fa8883a1e39a20e72aaa5093af0c80062cb95757:
>
> Merge branch 'master' of git://git.denx.de/u-boot-i2c (2015-11-27 08:41:03 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to f1df81c4008c8e0edbc1a2738cf2490b2f7be661:
>
> arm: kirkwood: add ZyXEL NSA310S device (2015-11-29 22:16:14 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151130/8d0c1a27/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-11-29 21:20 Luka Perkov
2015-11-30 20:17 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-11-29 21:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the queued changes below from Marvell tree. Additional work from
Stefan will be sent later on.
The following changes since commit fa8883a1e39a20e72aaa5093af0c80062cb95757:
Merge branch 'master' of git://git.denx.de/u-boot-i2c (2015-11-27 08:41:03 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to f1df81c4008c8e0edbc1a2738cf2490b2f7be661:
arm: kirkwood: add ZyXEL NSA310S device (2015-11-29 22:16:14 +0100)
----------------------------------------------------------------
Gerald Kerma (1):
arm: kirkwood: add ZyXEL NSA310S device
Reinhard Pfau (2):
tools/kwbimage: fix endianess issue
tools/kwbimage: fix size computations for v1 images
Stefan Roese (2):
arm: mvebu: Configure ARP timeout and retry count
tools/kwbimage.c: Make sure that the resulting image is 4-byte aligned
arch/arm/mach-kirkwood/Kconfig | 4 +
arch/arm/mach-mvebu/include/mach/config.h | 2 +
board/zyxel/nsa310s/Kconfig | 20 +++++
board/zyxel/nsa310s/MAINTAINERS | 8 ++
board/zyxel/nsa310s/Makefile | 9 ++
board/zyxel/nsa310s/kwbimage.cfg | 43 ++++++++++
board/zyxel/nsa310s/nsa310s.c | 133 ++++++++++++++++++++++++++++++
board/zyxel/nsa310s/nsa310s.h | 47 +++++++++++
configs/nsa310s_defconfig | 13 +++
include/configs/nsa310s.h | 99 ++++++++++++++++++++++
tools/kwbimage.c | 60 ++++++++------
tools/kwbimage.h | 3 +-
12 files changed, 417 insertions(+), 24 deletions(-)
create mode 100644 board/zyxel/nsa310s/Kconfig
create mode 100644 board/zyxel/nsa310s/MAINTAINERS
create mode 100644 board/zyxel/nsa310s/Makefile
create mode 100644 board/zyxel/nsa310s/kwbimage.cfg
create mode 100644 board/zyxel/nsa310s/nsa310s.c
create mode 100644 board/zyxel/nsa310s/nsa310s.h
create mode 100644 configs/nsa310s_defconfig
create mode 100644 include/configs/nsa310s.h
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-11-17 22:46 Luka Perkov
@ 2015-11-18 0:50 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-11-18 0:50 UTC (permalink / raw)
To: u-boot
On Tue, Nov 17, 2015 at 10:46:31PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> can you please pull the collected work from Dirk, Kevin, Quentin, Stefan
> and me on the mvebu and kirkwood SoC? Thank you!
>
> The following changes since commit 3d4825446e4258192e1f2302d691a8c0c82a0975:
>
> Prepare v2016.01-rc1 (2015-11-16 20:29:51 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 6a26748c5e5558073b72ff55de4dc3ea245d3726:
>
> arm: kirkwood: ib62x0: drop duplicate defines from CONFIG_SYS_MVFS (2015-11-17 23:41:41 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151117/223c7bd0/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-11-17 22:46 Luka Perkov
2015-11-18 0:50 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-11-17 22:46 UTC (permalink / raw)
To: u-boot
Hi Tom,
can you please pull the collected work from Dirk, Kevin, Quentin, Stefan
and me on the mvebu and kirkwood SoC? Thank you!
The following changes since commit 3d4825446e4258192e1f2302d691a8c0c82a0975:
Prepare v2016.01-rc1 (2015-11-16 20:29:51 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 6a26748c5e5558073b72ff55de4dc3ea245d3726:
arm: kirkwood: ib62x0: drop duplicate defines from CONFIG_SYS_MVFS (2015-11-17 23:41:41 +0100)
----------------------------------------------------------------
Dirk Eibach (1):
arm: mvebu: Fix SAR1_CPU_CORE_MASK
Kevin Smith (3):
arm: mvebu: a38x: Remove unsupported topologies
arm: mvebu: a38x: Add const to some function calls
arm: mvebu: a38x: serdes specification cleanup
Luka Perkov (6):
arm: kirkwood: ib62x0: drop CONFIG_MACH_TYPE
arm: kirkwood: ib62x0: build u-boot.kwb
arm: kirkwood: ib62x0: drop CONFIG_CMD_ENV define
arm: kirkwood: ib62x0: make use of defconfig
arm: kirkwood: ib62x0: drop dev CONFIG_OF_LIBFDT
arm: kirkwood: ib62x0: drop duplicate defines from CONFIG_SYS_MVFS
Quentin Armitage (7):
arm: kirkwood: standardise the configuration
arm: kirkwood: Remove duplicate definition of CONFIG_CMD_FAT
arm: kirkwood: Move configuration of some commands to _defconfig files
arm: kirkwood: Use common definition for filesystems
arm: kirkwood: Align configuration files
arm: kirkwood: Remove duplicate definition from dreamplug.h
arm: kirkwood: Move common definitions into common file
Stefan Roese (1):
tools/kwbimage.c: Fix generation of binary header
arch/arm/mach-mvebu/serdes/a38x/Makefile | 1 -
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c | 13 +-
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h | 2 +-
.../serdes/a38x/high_speed_env_spec-38x.c | 1 -
.../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 103 +-
.../mach-mvebu/serdes/a38x/high_speed_env_spec.h | 8 +-
.../serdes/a38x/high_speed_topology_spec-38x.c | 1009 --------------------
.../serdes/a38x/high_speed_topology_spec.h | 124 ---
arch/arm/mach-mvebu/serdes/a38x/seq_exec.c | 1 -
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 151 ---
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 2 -
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 17 +
configs/dreamplug_defconfig | 5 +
configs/guruplug_defconfig | 5 +
configs/ib62x0_defconfig | 5 +
configs/sheevaplug_defconfig | 5 +
drivers/ddr/marvell/a38x/ddr3_a38x.h | 5 -
.../ddr/marvell/a38x/ddr3_hws_hw_training_def.h | 7 +-
drivers/ddr/marvell/a38x/ddr3_init.c | 72 --
include/configs/dreamplug.h | 34 +-
include/configs/guruplug.h | 52 +-
include/configs/ib62x0.h | 30 +-
include/configs/mv-plug-common.h | 64 ++
include/configs/sheevaplug.h | 49 +-
tools/kwbimage.c | 12 +-
25 files changed, 175 insertions(+), 1602 deletions(-)
delete mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c
delete mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h
create mode 100644 include/configs/mv-plug-common.h
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-10-21 0:29 Luka Perkov
@ 2015-10-21 13:10 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-10-21 13:10 UTC (permalink / raw)
To: u-boot
On Wed, Oct 21, 2015 at 12:29:46AM +0000, Luka Perkov wrote:
> Hi Tom,
>
> can you please pull various mvebu enhancements from Stefan?
>
> The following changes since commit 5ec0003b19cbdf06ccd6941237cbc0d1c3468e2d:
>
> Prepare v2015.10 (2015-10-19 19:59:38 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 5b37212a3d78f546b5ef3f97a75155b3a0fd88cb:
>
> mmc: mv_sdhci: Configure the SDHCI MBUS bridge windows (2015-10-21 02:25:02 +0200)
>
Thanks for being the second pull request and..
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151021/5f73cce2/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-10-21 0:29 Luka Perkov
2015-10-21 13:10 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-10-21 0:29 UTC (permalink / raw)
To: u-boot
Hi Tom,
can you please pull various mvebu enhancements from Stefan?
The following changes since commit 5ec0003b19cbdf06ccd6941237cbc0d1c3468e2d:
Prepare v2015.10 (2015-10-19 19:59:38 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 5b37212a3d78f546b5ef3f97a75155b3a0fd88cb:
mmc: mv_sdhci: Configure the SDHCI MBUS bridge windows (2015-10-21 02:25:02 +0200)
----------------------------------------------------------------
Stefan Roese (12):
arm: mvebu: Move Armada XP/38x Kconfig to mach specific Kconfig file
arm: mvebu: Add option to use UART xmodem protocol via kwboot
arm: mvebu: Only set CONFIG_SKIP_LOWLEVEL_INIT for SPL
dm: core: Enable optional use of fdt_translate_address()
kwbimage: Align payload size to 4 bytes
arm: mvebu: Do not call board_init_r() from board_init_f()
arm: mvebu: Add basic Armada XP / 38x dtsi/dts files
arm: mvebu: Add DM (driver model) support
usb: ehci-marvell.c: Add DM support
arm: mvebu: Enable DM_USB on AXP / A38x boards
arm: mvebu: Enable DM_SERIAL on AXP / A38x boards
mmc: mv_sdhci: Configure the SDHCI MBUS bridge windows
Makefile | 14 +-
arch/arm/Kconfig | 20 +-
arch/arm/dts/Makefile | 5 +
arch/arm/dts/armada-370-xp.dtsi | 333 ++++++++++++++++++
arch/arm/dts/armada-380.dtsi | 152 +++++++++
arch/arm/dts/armada-385.dtsi | 184 ++++++++++
arch/arm/dts/armada-388-gp.dts | 413 +++++++++++++++++++++++
arch/arm/dts/armada-388.dtsi | 70 ++++
arch/arm/dts/armada-38x.dtsi | 600 +++++++++++++++++++++++++++++++++
arch/arm/dts/armada-xp-gp.dts | 245 ++++++++++++++
arch/arm/dts/armada-xp-mv78230.dtsi | 231 +++++++++++++
arch/arm/dts/armada-xp-mv78260.dtsi | 333 ++++++++++++++++++
arch/arm/dts/armada-xp-mv78460.dtsi | 371 ++++++++++++++++++++
arch/arm/dts/armada-xp.dtsi | 320 ++++++++++++++++++
arch/arm/mach-mvebu/Kconfig | 31 ++
arch/arm/mach-mvebu/cpu.c | 31 +-
arch/arm/mach-mvebu/include/mach/cpu.h | 2 +
arch/arm/mach-mvebu/include/mach/soc.h | 2 +-
arch/arm/mach-mvebu/lowlevel_spl.S | 16 +
arch/arm/mach-mvebu/spl.c | 26 +-
board/Marvell/db-88f6820-gp/Kconfig | 3 -
board/Marvell/db-mv784mp-gp/Kconfig | 3 -
board/maxbcm/Kconfig | 3 -
configs/db-88f6820-gp_defconfig | 7 +
configs/db-mv784mp-gp_defconfig | 7 +
configs/maxbcm_defconfig | 2 +
drivers/core/Kconfig | 30 ++
drivers/core/device.c | 20 ++
drivers/mmc/mv_sdhci.c | 41 +++
drivers/usb/host/Kconfig | 7 +
drivers/usb/host/ehci-marvell.c | 86 ++++-
include/configs/db-88f6820-gp.h | 6 +-
include/configs/db-mv784mp-gp.h | 6 +-
include/configs/maxbcm.h | 2 +
include/configs/mv-common.h | 10 +-
tools/kwbimage.c | 3 +
36 files changed, 3570 insertions(+), 65 deletions(-)
create mode 100644 arch/arm/dts/armada-370-xp.dtsi
create mode 100644 arch/arm/dts/armada-380.dtsi
create mode 100644 arch/arm/dts/armada-385.dtsi
create mode 100644 arch/arm/dts/armada-388-gp.dts
create mode 100644 arch/arm/dts/armada-388.dtsi
create mode 100644 arch/arm/dts/armada-38x.dtsi
create mode 100644 arch/arm/dts/armada-xp-gp.dts
create mode 100644 arch/arm/dts/armada-xp-mv78230.dtsi
create mode 100644 arch/arm/dts/armada-xp-mv78260.dtsi
create mode 100644 arch/arm/dts/armada-xp-mv78460.dtsi
create mode 100644 arch/arm/dts/armada-xp.dtsi
create mode 100644 arch/arm/mach-mvebu/Kconfig
Thanks,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-10-01 0:07 Luka Perkov
@ 2015-10-03 0:35 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-10-03 0:35 UTC (permalink / raw)
To: u-boot
On Thu, Oct 01, 2015 at 12:07:42AM +0000, Luka Perkov wrote:
> Hi Tom,
>
> can you please pull these three commits containing two mvebu related
> fixes and one handy kwboot tool feature?
>
> The following changes since commit 1f8836396de8215b7f460616926052b32597bb29:
>
> Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to e29f1db3dd96901fb54d8faefed8cd2987704b68:
>
> tools: kwboot: Add support for UART boot mode patching for Armada XP/38x (2015-10-01 02:02:06 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151002/ad5e5070/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-10-01 0:07 Luka Perkov
2015-10-03 0:35 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-10-01 0:07 UTC (permalink / raw)
To: u-boot
Hi Tom,
can you please pull these three commits containing two mvebu related
fixes and one handy kwboot tool feature?
The following changes since commit 1f8836396de8215b7f460616926052b32597bb29:
Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to e29f1db3dd96901fb54d8faefed8cd2987704b68:
tools: kwboot: Add support for UART boot mode patching for Armada XP/38x (2015-10-01 02:02:06 +0200)
----------------------------------------------------------------
Stefan Roese (3):
arm: mvebu: Fix internal register config on A38x
arm: mvebu: timer.c: Explicitly move "init_done" var to data section
tools: kwboot: Add support for UART boot mode patching for Armada XP/38x
arch/arm/mach-mvebu/cpu.c | 36 +++++++-----
arch/arm/mach-mvebu/timer.c | 2 +-
tools/kwbimage.c | 94 -------------------------------
tools/kwbimage.h | 133 ++++++++++++++++++++++++++++++++------------
tools/kwboot.c | 37 ++++++++----
5 files changed, 148 insertions(+), 154 deletions(-)
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-08-17 16:56 Luka Perkov
@ 2015-08-18 0:54 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-08-18 0:54 UTC (permalink / raw)
To: u-boot
On Mon, Aug 17, 2015 at 04:56:18PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> pull containes patches from Stefan and Anton that have been posted on the
> mailing list a while back. The newest feature is PCI support on mvebu.
>
>
> The following changes since commit 58243001a9419d9d1671e32611b7d15f6ed64b3a:
>
> i2c: lpc32xx: fix write timeout (2015-08-17 08:11:50 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to ce2cb1d3ed92e91b24db516802be3688f7c28e26:
>
> arm: mvebu: db-88f6820-gp: Enable PCI support (2015-08-17 18:49:52 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150817/e17cbf59/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-08-17 16:56 Luka Perkov
2015-08-18 0:54 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-08-17 16:56 UTC (permalink / raw)
To: u-boot
Hi Tom,
pull containes patches from Stefan and Anton that have been posted on the
mailing list a while back. The newest feature is PCI support on mvebu.
The following changes since commit 58243001a9419d9d1671e32611b7d15f6ed64b3a:
i2c: lpc32xx: fix write timeout (2015-08-17 08:11:50 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to ce2cb1d3ed92e91b24db516802be3688f7c28e26:
arm: mvebu: db-88f6820-gp: Enable PCI support (2015-08-17 18:49:52 +0200)
----------------------------------------------------------------
Anton Schubert (2):
arm: mvebu: add multiple usb-hostcontroller support for AXP
pci: mvebu: Add PCIe driver
Stefan Roese (16):
arm: mvebu/armada100: dram.c: Remove CONFIG_SYS_BOARD_DRAM_INIT
arm: mvebu: sdram: Enable ECC support on Armada XP
arm: mvebu: db-mv784mp-gp.h: Fix image creation - use correct offset
arm: mvebu: Change MBUS base addresses and sizes
arm: mvebu: Setup the MBUS bridge registers
arm: mvebu: Flush caches and disable MMU only on A38x
arm: mvebu: Disable MBUS error propagation
arm: mvebu: Enable NAND controller on MVEBU SoC's
arm: mvebu: Enable USB EHCI support on Armada XP
arm: mvebu: db-mv785mp-gp: Add USB/EHCI support
arm: mvebu: Display ECC enabled / disabled upon bootup
arm: mvebu: Move CONFIG_SYS_TEXT_BASE to an address < 16 MiB
arm: mvebu: dram.c: Rework dram_init() and dram_init_banksize()
arm: mvebu: Add complete SDRAM ECC scrubbing
arm: mvebu: db-mv784mp-gp: Enable PCI support
arm: mvebu: db-88f6820-gp: Enable PCI support
arch/arm/cpu/arm926ejs/armada100/dram.c | 2 -
arch/arm/mach-mvebu/Makefile | 4 +
arch/arm/mach-mvebu/cpu.c | 103 +++++--
arch/arm/mach-mvebu/dram.c | 180 +++++++++++-
arch/arm/mach-mvebu/include/mach/cpu.h | 13 +-
arch/arm/mach-mvebu/include/mach/soc.h | 29 ++
arch/arm/mach-mvebu/mbus.c | 57 +++-
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 9 +-
board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c | 9 +-
drivers/ddr/marvell/axp/ddr3_axp_config.h | 2 +-
drivers/ddr/marvell/axp/xor.c | 3 +-
drivers/ddr/marvell/axp/xor.h | 1 +
drivers/net/mvneta.c | 1 -
drivers/pci/Makefile | 1 +
drivers/pci/pci_mvebu.c | 423 ++++++++++++++++++++++++++++
drivers/usb/host/ehci-marvell.c | 28 +-
include/configs/db-88f6820-gp.h | 15 +-
include/configs/db-mv784mp-gp.h | 24 +-
include/configs/maxbcm.h | 7 +-
19 files changed, 855 insertions(+), 56 deletions(-)
create mode 100644 drivers/pci/pci_mvebu.c
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-07-24 7:56 Luka Perkov
@ 2015-07-25 19:50 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-07-25 19:50 UTC (permalink / raw)
To: u-boot
On Fri, Jul 24, 2015 at 07:56:46AM +0000, Luka Perkov wrote:
> Hi Tom,
>
> can you please pull this batch from Stefan as well?
>
> This pull request does not contain patches that are still under review.
> Pull request for those will be sent another time.
>
> The following changes since commit 413978d118bb7d7b0a8488d97d802f2899cd81ce:
>
> Merge git://git.denx.de/u-boot-uniphier (2015-07-23 11:46:05 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 5a9749ee12bed44ca4dc7f2412b5a340db666954:
>
> arm: marvell: Increase MAXARGS to 32 (2015-07-24 09:48:07 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150725/cb2e4a89/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-07-24 7:56 Luka Perkov
2015-07-25 19:50 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-07-24 7:56 UTC (permalink / raw)
To: u-boot
Hi Tom,
can you please pull this batch from Stefan as well?
This pull request does not contain patches that are still under review.
Pull request for those will be sent another time.
The following changes since commit 413978d118bb7d7b0a8488d97d802f2899cd81ce:
Merge git://git.denx.de/u-boot-uniphier (2015-07-23 11:46:05 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 5a9749ee12bed44ca4dc7f2412b5a340db666954:
arm: marvell: Increase MAXARGS to 32 (2015-07-24 09:48:07 +0200)
----------------------------------------------------------------
Stefan Roese (6):
arm: mvebu: Add SPL SDIO/MMC boot support
kwbimage: Add support for SDIO/MMC boot device selection
kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS
spl: spl_mmc: Add option to boot from a MMC partition with offset
arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support
arm: marvell: Increase MAXARGS to 32
arch/arm/mach-mvebu/spl.c | 13 ++++++++++++-
common/spl/spl_mmc.c | 5 +++++
include/configs/db-88f6820-gp.h | 28 ++++++++++++++++++++++++++++
include/configs/mv-common.h | 2 +-
tools/Makefile | 4 ++--
tools/kwbimage.c | 13 +++++++------
6 files changed, 55 insertions(+), 10 deletions(-)
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
[not found] <20150723063510.GA1896@localhost>
@ 2015-07-23 7:29 ` Luka Perkov
0 siblings, 0 replies; 32+ messages in thread
From: Luka Perkov @ 2015-07-23 7:29 UTC (permalink / raw)
To: u-boot
Hi Tom,
please ignore this pull. For some reason body of commit messages is
missing - thanks Stefan for pointing this out. I will fix and resend.
Regards,
Luka
On Thu, Jul 23, 2015 at 08:35:10AM +0200, Luka Perkov wrote:
> Hi Tom,
>
> can you please pull the mvebu tree? This series contains mvebu DDR
> training code and couple of bug fixes.
>
> Thanks,
> Luka
>
> The following changes since commit b217c89e8565ade3aaa9f74c33c93236bf151187:
>
> Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq (2015-07-20 17:12:52 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 58048856126ebe932395abaffa8372b66f64d0e1:
>
> arm: mvebu: db-88f6820: Add SPL support with DDR init code (2015-07-23 08:30:59 +0200)
>
> ----------------------------------------------------------------
> Anton Schubert (1):
> arm: mvebu: add Armada XP SATA support
>
> Stefan Roese (11):
> arm: mvebu: Call timer_init early before PHY and DDR init
> arm: mvebu: Use default reg base address for SPL on A38x
> arm: mvebu: spl.c: Add call to board_early_init_f()
> arm: mvebu: Disable MMU before changing register base address
> Makefile: Fix mvebu build target to use SPL load and exe-address
> arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory
> arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr
> arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory
> arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr
> arm: mvebu: a38x: Use correct PEX register access macros
> arm: mvebu: db-88f6820: Add SPL support with DDR init code
>
> Makefile | 2 +-
> arch/arm/mach-mvebu/Makefile | 4 +-
> arch/arm/mach-mvebu/cpu.c | 18 +
> arch/arm/mach-mvebu/include/mach/cpu.h | 2 +-
> arch/arm/mach-mvebu/include/mach/soc.h | 11 +
> arch/arm/mach-mvebu/serdes/a38x/Makefile | 10 +
> arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c | 347 +++
> arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h | 86 +
> .../serdes/a38x/high_speed_env_spec-38x.c | 158 ++
> .../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 2228 +++++++++++++++++
> .../mach-mvebu/serdes/a38x/high_speed_env_spec.h | 251 ++
> .../serdes/a38x/high_speed_topology_spec-38x.c | 1009 ++++++++
> .../serdes/a38x/high_speed_topology_spec.h | 124 +
> arch/arm/mach-mvebu/serdes/a38x/seq_exec.c | 170 ++
> arch/arm/mach-mvebu/serdes/a38x/seq_exec.h | 65 +
> arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 388 +++
> arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 371 +++
> arch/arm/mach-mvebu/serdes/{ => axp}/Makefile | 0
> .../mach-mvebu/serdes/{ => axp}/board_env_spec.h | 0
> .../serdes/{ => axp}/high_speed_env_lib.c | 0
> .../serdes/{ => axp}/high_speed_env_spec.c | 0
> .../serdes/{ => axp}/high_speed_env_spec.h | 2 +-
> arch/arm/mach-mvebu/spl.c | 9 +
> arch/arm/mach-mvebu/timer.c | 7 +
> board/Marvell/db-88f6820-gp/README | 18 +
> board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 31 +
> board/Marvell/db-88f6820-gp/kwbimage.cfg | 2 +-
> board/maxbcm/maxbcm.c | 4 +-
> configs/db-88f6820-gp_defconfig | 1 +
> drivers/block/mvsata_ide.c | 41 +
> drivers/ddr/marvell/a38x/Makefile | 19 +
> drivers/ddr/marvell/a38x/ddr3_a38x.c | 741 ++++++
> drivers/ddr/marvell/a38x/ddr3_a38x.h | 98 +
> drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h | 226 ++
> drivers/ddr/marvell/a38x/ddr3_a38x_topology.h | 22 +
> drivers/ddr/marvell/a38x/ddr3_a38x_training.c | 40 +
> drivers/ddr/marvell/a38x/ddr3_debug.c | 1551 ++++++++++++
> drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c | 148 ++
> drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h | 49 +
> .../ddr/marvell/a38x/ddr3_hws_hw_training_def.h | 467 ++++
> drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h | 17 +
> drivers/ddr/marvell/a38x/ddr3_init.c | 852 +++++++
> drivers/ddr/marvell/a38x/ddr3_init.h | 395 +++
> drivers/ddr/marvell/a38x/ddr3_logging_def.h | 101 +
> drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h | 924 +++++++
> drivers/ddr/marvell/a38x/ddr3_topology_def.h | 76 +
> drivers/ddr/marvell/a38x/ddr3_training.c | 2644 ++++++++++++++++++++
> drivers/ddr/marvell/a38x/ddr3_training_bist.c | 289 +++
> .../marvell/a38x/ddr3_training_centralization.c | 714 ++++++
> drivers/ddr/marvell/a38x/ddr3_training_db.c | 652 +++++
> drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 686 +++++
> drivers/ddr/marvell/a38x/ddr3_training_hw_algo.h | 14 +
> drivers/ddr/marvell/a38x/ddr3_training_ip.h | 180 ++
> drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h | 54 +
> .../marvell/a38x/ddr3_training_ip_centralization.h | 15 +
> drivers/ddr/marvell/a38x/ddr3_training_ip_db.h | 34 +
> drivers/ddr/marvell/a38x/ddr3_training_ip_def.h | 173 ++
> drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c | 1354 ++++++++++
> drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h | 85 +
> drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h | 349 +++
> drivers/ddr/marvell/a38x/ddr3_training_ip_pbs.h | 41 +
> drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h | 107 +
> drivers/ddr/marvell/a38x/ddr3_training_ip_static.h | 31 +
> drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 1836 ++++++++++++++
> drivers/ddr/marvell/a38x/ddr3_training_leveling.h | 17 +
> drivers/ddr/marvell/a38x/ddr3_training_pbs.c | 995 ++++++++
> drivers/ddr/marvell/a38x/ddr3_training_static.c | 538 ++++
> drivers/ddr/marvell/a38x/ddr_topology_def.h | 112 +
> drivers/ddr/marvell/a38x/ddr_training_ip_db.h | 16 +
> drivers/ddr/marvell/a38x/silicon_if.h | 17 +
> drivers/ddr/marvell/a38x/xor.c | 356 +++
> drivers/ddr/marvell/a38x/xor.h | 92 +
> drivers/ddr/marvell/a38x/xor_regs.h | 236 ++
> drivers/ddr/{mvebu => marvell/axp}/Makefile | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_axp.h | 0
> .../ddr/{mvebu => marvell/axp}/ddr3_axp_config.h | 0
> .../{mvebu => marvell/axp}/ddr3_axp_mc_static.h | 0
> .../axp}/ddr3_axp_training_static.h | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_vars.h | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_dfs.c | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_dqs.c | 0
> .../ddr/{mvebu => marvell/axp}/ddr3_hw_training.c | 0
> .../ddr/{mvebu => marvell/axp}/ddr3_hw_training.h | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_init.c | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_init.h | 0
> .../{mvebu => marvell/axp}/ddr3_patterns_64bit.h | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_pbs.c | 0
> .../{mvebu => marvell/axp}/ddr3_read_leveling.c | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_sdram.c | 0
> drivers/ddr/{mvebu => marvell/axp}/ddr3_spd.c | 0
> .../{mvebu => marvell/axp}/ddr3_write_leveling.c | 0
> drivers/ddr/{mvebu => marvell/axp}/xor.c | 0
> drivers/ddr/{mvebu => marvell/axp}/xor.h | 0
> drivers/ddr/{mvebu => marvell/axp}/xor_regs.h | 0
> include/configs/db-88f6820-gp.h | 35 +
> include/configs/db-mv784mp-gp.h | 31 +-
> include/configs/maxbcm.h | 2 +-
> scripts/Makefile.spl | 3 +-
> 98 files changed, 22783 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/Makefile
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/seq_exec.c
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/seq_exec.h
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
> create mode 100644 arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
> rename arch/arm/mach-mvebu/serdes/{ => axp}/Makefile (100%)
> rename arch/arm/mach-mvebu/serdes/{ => axp}/board_env_spec.h (100%)
> rename arch/arm/mach-mvebu/serdes/{ => axp}/high_speed_env_lib.c (100%)
> rename arch/arm/mach-mvebu/serdes/{ => axp}/high_speed_env_spec.c (100%)
> rename arch/arm/mach-mvebu/serdes/{ => axp}/high_speed_env_spec.h (97%)
> create mode 100644 board/Marvell/db-88f6820-gp/README
> create mode 100644 drivers/ddr/marvell/a38x/Makefile
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_topology.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_training.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_debug.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training_def.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_init.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_init.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_logging_def.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_topology_def.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_bist.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_centralization.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_db.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_hw_algo.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_centralization.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_db.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_def.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_pbs.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_static.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_leveling.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_leveling.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_pbs.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_static.c
> create mode 100644 drivers/ddr/marvell/a38x/ddr_topology_def.h
> create mode 100644 drivers/ddr/marvell/a38x/ddr_training_ip_db.h
> create mode 100644 drivers/ddr/marvell/a38x/silicon_if.h
> create mode 100644 drivers/ddr/marvell/a38x/xor.c
> create mode 100644 drivers/ddr/marvell/a38x/xor.h
> create mode 100644 drivers/ddr/marvell/a38x/xor_regs.h
> rename drivers/ddr/{mvebu => marvell/axp}/Makefile (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_config.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_mc_static.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_training_static.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_vars.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_dfs.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_dqs.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_hw_training.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_hw_training.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_init.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_init.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_patterns_64bit.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_pbs.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_read_leveling.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_sdram.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_spd.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/ddr3_write_leveling.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/xor.c (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/xor.h (100%)
> rename drivers/ddr/{mvebu => marvell/axp}/xor_regs.h (100%)
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-07-23 6:35 Luka Perkov
0 siblings, 0 replies; 32+ messages in thread
From: Luka Perkov @ 2015-07-23 6:35 UTC (permalink / raw)
To: u-boot
Hi Tom,
can you please pull the mvebu tree? This series contains mvebu DDR
training code and couple of bug fixes.
Thanks,
Luka
The following changes since commit b217c89e8565ade3aaa9f74c33c93236bf151187:
Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq (2015-07-20 17:12:52 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 58048856126ebe932395abaffa8372b66f64d0e1:
arm: mvebu: db-88f6820: Add SPL support with DDR init code (2015-07-23 08:30:59 +0200)
----------------------------------------------------------------
Anton Schubert (1):
arm: mvebu: add Armada XP SATA support
Stefan Roese (11):
arm: mvebu: Call timer_init early before PHY and DDR init
arm: mvebu: Use default reg base address for SPL on A38x
arm: mvebu: spl.c: Add call to board_early_init_f()
arm: mvebu: Disable MMU before changing register base address
Makefile: Fix mvebu build target to use SPL load and exe-address
arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory
arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr
arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr
arm: mvebu: a38x: Use correct PEX register access macros
arm: mvebu: db-88f6820: Add SPL support with DDR init code
Makefile | 2 +-
arch/arm/mach-mvebu/Makefile | 4 +-
arch/arm/mach-mvebu/cpu.c | 18 +
arch/arm/mach-mvebu/include/mach/cpu.h | 2 +-
arch/arm/mach-mvebu/include/mach/soc.h | 11 +
arch/arm/mach-mvebu/serdes/a38x/Makefile | 10 +
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c | 347 +++
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h | 86 +
.../serdes/a38x/high_speed_env_spec-38x.c | 158 ++
.../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 2228 +++++++++++++++++
.../mach-mvebu/serdes/a38x/high_speed_env_spec.h | 251 ++
.../serdes/a38x/high_speed_topology_spec-38x.c | 1009 ++++++++
.../serdes/a38x/high_speed_topology_spec.h | 124 +
arch/arm/mach-mvebu/serdes/a38x/seq_exec.c | 170 ++
arch/arm/mach-mvebu/serdes/a38x/seq_exec.h | 65 +
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 388 +++
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 371 +++
arch/arm/mach-mvebu/serdes/{ => axp}/Makefile | 0
.../mach-mvebu/serdes/{ => axp}/board_env_spec.h | 0
.../serdes/{ => axp}/high_speed_env_lib.c | 0
.../serdes/{ => axp}/high_speed_env_spec.c | 0
.../serdes/{ => axp}/high_speed_env_spec.h | 2 +-
arch/arm/mach-mvebu/spl.c | 9 +
arch/arm/mach-mvebu/timer.c | 7 +
board/Marvell/db-88f6820-gp/README | 18 +
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 31 +
board/Marvell/db-88f6820-gp/kwbimage.cfg | 2 +-
board/maxbcm/maxbcm.c | 4 +-
configs/db-88f6820-gp_defconfig | 1 +
drivers/block/mvsata_ide.c | 41 +
drivers/ddr/marvell/a38x/Makefile | 19 +
drivers/ddr/marvell/a38x/ddr3_a38x.c | 741 ++++++
drivers/ddr/marvell/a38x/ddr3_a38x.h | 98 +
drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h | 226 ++
drivers/ddr/marvell/a38x/ddr3_a38x_topology.h | 22 +
drivers/ddr/marvell/a38x/ddr3_a38x_training.c | 40 +
drivers/ddr/marvell/a38x/ddr3_debug.c | 1551 ++++++++++++
drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c | 148 ++
drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h | 49 +
.../ddr/marvell/a38x/ddr3_hws_hw_training_def.h | 467 ++++
drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h | 17 +
drivers/ddr/marvell/a38x/ddr3_init.c | 852 +++++++
drivers/ddr/marvell/a38x/ddr3_init.h | 395 +++
drivers/ddr/marvell/a38x/ddr3_logging_def.h | 101 +
drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h | 924 +++++++
drivers/ddr/marvell/a38x/ddr3_topology_def.h | 76 +
drivers/ddr/marvell/a38x/ddr3_training.c | 2644 ++++++++++++++++++++
drivers/ddr/marvell/a38x/ddr3_training_bist.c | 289 +++
.../marvell/a38x/ddr3_training_centralization.c | 714 ++++++
drivers/ddr/marvell/a38x/ddr3_training_db.c | 652 +++++
drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 686 +++++
drivers/ddr/marvell/a38x/ddr3_training_hw_algo.h | 14 +
drivers/ddr/marvell/a38x/ddr3_training_ip.h | 180 ++
drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h | 54 +
.../marvell/a38x/ddr3_training_ip_centralization.h | 15 +
drivers/ddr/marvell/a38x/ddr3_training_ip_db.h | 34 +
drivers/ddr/marvell/a38x/ddr3_training_ip_def.h | 173 ++
drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c | 1354 ++++++++++
drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h | 85 +
drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h | 349 +++
drivers/ddr/marvell/a38x/ddr3_training_ip_pbs.h | 41 +
drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h | 107 +
drivers/ddr/marvell/a38x/ddr3_training_ip_static.h | 31 +
drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 1836 ++++++++++++++
drivers/ddr/marvell/a38x/ddr3_training_leveling.h | 17 +
drivers/ddr/marvell/a38x/ddr3_training_pbs.c | 995 ++++++++
drivers/ddr/marvell/a38x/ddr3_training_static.c | 538 ++++
drivers/ddr/marvell/a38x/ddr_topology_def.h | 112 +
drivers/ddr/marvell/a38x/ddr_training_ip_db.h | 16 +
drivers/ddr/marvell/a38x/silicon_if.h | 17 +
drivers/ddr/marvell/a38x/xor.c | 356 +++
drivers/ddr/marvell/a38x/xor.h | 92 +
drivers/ddr/marvell/a38x/xor_regs.h | 236 ++
drivers/ddr/{mvebu => marvell/axp}/Makefile | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_axp.h | 0
.../ddr/{mvebu => marvell/axp}/ddr3_axp_config.h | 0
.../{mvebu => marvell/axp}/ddr3_axp_mc_static.h | 0
.../axp}/ddr3_axp_training_static.h | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_vars.h | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_dfs.c | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_dqs.c | 0
.../ddr/{mvebu => marvell/axp}/ddr3_hw_training.c | 0
.../ddr/{mvebu => marvell/axp}/ddr3_hw_training.h | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_init.c | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_init.h | 0
.../{mvebu => marvell/axp}/ddr3_patterns_64bit.h | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_pbs.c | 0
.../{mvebu => marvell/axp}/ddr3_read_leveling.c | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_sdram.c | 0
drivers/ddr/{mvebu => marvell/axp}/ddr3_spd.c | 0
.../{mvebu => marvell/axp}/ddr3_write_leveling.c | 0
drivers/ddr/{mvebu => marvell/axp}/xor.c | 0
drivers/ddr/{mvebu => marvell/axp}/xor.h | 0
drivers/ddr/{mvebu => marvell/axp}/xor_regs.h | 0
include/configs/db-88f6820-gp.h | 35 +
include/configs/db-mv784mp-gp.h | 31 +-
include/configs/maxbcm.h | 2 +-
scripts/Makefile.spl | 3 +-
98 files changed, 22783 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/Makefile
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/seq_exec.c
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/seq_exec.h
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
create mode 100644 arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
rename arch/arm/mach-mvebu/serdes/{ => axp}/Makefile (100%)
rename arch/arm/mach-mvebu/serdes/{ => axp}/board_env_spec.h (100%)
rename arch/arm/mach-mvebu/serdes/{ => axp}/high_speed_env_lib.c (100%)
rename arch/arm/mach-mvebu/serdes/{ => axp}/high_speed_env_spec.c (100%)
rename arch/arm/mach-mvebu/serdes/{ => axp}/high_speed_env_spec.h (97%)
create mode 100644 board/Marvell/db-88f6820-gp/README
create mode 100644 drivers/ddr/marvell/a38x/Makefile
create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_topology.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_training.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_debug.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training_def.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_init.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_init.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_logging_def.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_topology_def.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_bist.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_centralization.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_db.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_hw_algo.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_centralization.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_db.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_def.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_pbs.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_static.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_leveling.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_leveling.h
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_pbs.c
create mode 100644 drivers/ddr/marvell/a38x/ddr3_training_static.c
create mode 100644 drivers/ddr/marvell/a38x/ddr_topology_def.h
create mode 100644 drivers/ddr/marvell/a38x/ddr_training_ip_db.h
create mode 100644 drivers/ddr/marvell/a38x/silicon_if.h
create mode 100644 drivers/ddr/marvell/a38x/xor.c
create mode 100644 drivers/ddr/marvell/a38x/xor.h
create mode 100644 drivers/ddr/marvell/a38x/xor_regs.h
rename drivers/ddr/{mvebu => marvell/axp}/Makefile (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_config.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_mc_static.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_training_static.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_axp_vars.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_dfs.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_dqs.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_hw_training.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_hw_training.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_init.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_init.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_patterns_64bit.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_pbs.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_read_leveling.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_sdram.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_spd.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/ddr3_write_leveling.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/xor.c (100%)
rename drivers/ddr/{mvebu => marvell/axp}/xor.h (100%)
rename drivers/ddr/{mvebu => marvell/axp}/xor_regs.h (100%)
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-07-10 12:59 Luka Perkov
@ 2015-07-10 19:03 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-07-10 19:03 UTC (permalink / raw)
To: u-boot
On Fri, Jul 10, 2015 at 12:59:38PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> can you please pull this 10 patches from Stefan?
>
> The following changes since commit f3edfd30541d6f245d7dfa6fa7354cc916cc53e1:
>
> net: designware: Program MAC address to hardware after soft reset (2015-07-08 13:43:19 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 59565736839108846d8dfa6782babfaefff6b58b:
>
> arm: mvebu: db-88f6820-gp: Add USB/EHCI support (2015-07-10 14:56:07 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150710/5f34b2ac/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-07-10 12:59 Luka Perkov
2015-07-10 19:03 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-07-10 12:59 UTC (permalink / raw)
To: u-boot
Hi Tom,
can you please pull this 10 patches from Stefan?
The following changes since commit f3edfd30541d6f245d7dfa6fa7354cc916cc53e1:
net: designware: Program MAC address to hardware after soft reset (2015-07-08 13:43:19 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 59565736839108846d8dfa6782babfaefff6b58b:
arm: mvebu: db-88f6820-gp: Add USB/EHCI support (2015-07-10 14:56:07 +0200)
----------------------------------------------------------------
Stefan Roese (10):
arm: mvebu: db-88f6820-gp: Add MAINTAINERS file
mmc: sdhci: Use timer based timeout detection in sdhci_send_command()
mmc: sdhci.c: Add config option to use a fixed buffer for transfers
arm: mvebu: Add SDIO/SDHCI support for Armada A38x
arm: mvebu: db-88f6820-gp: Add MMC/SDIO support
block: ahci: Don't enable port interrupts
arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x
arm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) support
usb: Add EHCI support for Armada 38x (mvebu)
arm: mvebu: db-88f6820-gp: Add USB/EHCI support
arch/arm/mach-mvebu/cpu.c | 66 +++++++++++++++++++++++++++++++++
arch/arm/mach-mvebu/include/mach/cpu.h | 2 +
arch/arm/mach-mvebu/include/mach/gpio.h | 10 +++++
arch/arm/mach-mvebu/include/mach/soc.h | 3 ++
board/Marvell/db-88f6820-gp/MAINTAINERS | 6 +++
drivers/block/ahci.c | 3 --
drivers/mmc/sdhci.c | 25 ++++++++++---
drivers/usb/host/ehci-marvell.c | 36 ++++++++++++++++++
include/configs/db-88f6820-gp.h | 41 ++++++++++++++++++++
9 files changed, 184 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/mach-mvebu/include/mach/gpio.h
create mode 100644 board/Marvell/db-88f6820-gp/MAINTAINERS
Thanks,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-06-28 15:58 Luka Perkov
@ 2015-06-29 0:36 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-06-29 0:36 UTC (permalink / raw)
To: u-boot
On Sun, Jun 28, 2015 at 03:58:33PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> this series contains two patches from Kevin that I missed to include in last
> pull request.
>
> The following changes since commit ef0f2f57524ec85fb9058a23298f2c4995e0d950:
>
> Move defaults from config_cmd_default.h to Kconfig (2015-06-25 22:18:34 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 3fd38af704f6d4da50fe7dbf9ff018e43b196fb4:
>
> db-88f6820-gp.h: Load data blobs into lower memory (2015-06-28 17:52:41 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150628/4889dc0f/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-06-28 15:58 Luka Perkov
2015-06-29 0:36 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-06-28 15:58 UTC (permalink / raw)
To: u-boot
Hi Tom,
this series contains two patches from Kevin that I missed to include in last
pull request.
The following changes since commit ef0f2f57524ec85fb9058a23298f2c4995e0d950:
Move defaults from config_cmd_default.h to Kconfig (2015-06-25 22:18:34 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 3fd38af704f6d4da50fe7dbf9ff018e43b196fb4:
db-88f6820-gp.h: Load data blobs into lower memory (2015-06-28 17:52:41 +0200)
----------------------------------------------------------------
Kevin Smith (2):
mv-common.h: Include support for device trees
db-88f6820-gp.h: Load data blobs into lower memory
include/configs/db-88f6820-gp.h | 5 +++++
include/configs/mv-common.h | 2 ++
2 files changed, 7 insertions(+)
Thanks,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-06-14 15:59 Luka Perkov
@ 2015-06-15 15:18 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-06-15 15:18 UTC (permalink / raw)
To: u-boot
On Sun, Jun 14, 2015 at 03:59:01PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> this series contains patches from Kevin and Stefan and it would be great if you
> could pull them in this release.
>
> The following changes since commit 64d16706a052553c85d2f8f4c741879a4e3e6116:
>
> Nokia RX-51: Fix calculating return address in save_boot_params (2015-06-12 08:11:18 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 1c0df9ef6ed03baf6fd325dac546290f80c7fd09:
>
> tools/kwboot: Add parameters to set delay and timeout via cmdline (2015-06-14 17:48:28 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150615/fb476a2a/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-06-14 15:59 Luka Perkov
2015-06-15 15:18 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-06-14 15:59 UTC (permalink / raw)
To: u-boot
Hi Tom,
this series contains patches from Kevin and Stefan and it would be great if you
could pull them in this release.
The following changes since commit 64d16706a052553c85d2f8f4c741879a4e3e6116:
Nokia RX-51: Fix calculating return address in save_boot_params (2015-06-12 08:11:18 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 1c0df9ef6ed03baf6fd325dac546290f80c7fd09:
tools/kwboot: Add parameters to set delay and timeout via cmdline (2015-06-14 17:48:28 +0200)
----------------------------------------------------------------
Kevin Smith (2):
tools/kwbimage.c: Correct header size for SPI boot
arm: mvebu: Update CBAR with SOC regs base
Stefan Roese (2):
arm: mvebu: Disable L2 cache before enabling d-cache
tools/kwboot: Add parameters to set delay and timeout via cmdline
arch/arm/mach-mvebu/cpu.c | 15 +++++++++++++++
tools/kwbimage.c | 22 ++++++++++++----------
tools/kwboot.c | 14 ++++++++++++--
3 files changed, 39 insertions(+), 12 deletions(-)
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-05-05 12:50 Luka Perkov
@ 2015-05-05 23:59 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-05-05 23:59 UTC (permalink / raw)
To: u-boot
On Tue, May 05, 2015 at 12:50:01PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> please pull from marvell/master. The changes include Stefan's Armada 38x
> series which reached v3 on the mailing list and two more Marvell Armada
> related fixes.
>
> The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
>
> Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze (2015-04-29 06:46:33 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 2083db7a75792d317a8e726e8be72abea8941d03:
>
> arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targets (2015-05-05 14:32:05 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150505/46e66c55/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-05-05 12:50 Luka Perkov
2015-05-05 23:59 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-05-05 12:50 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull from marvell/master. The changes include Stefan's Armada 38x
series which reached v3 on the mailing list and two more Marvell Armada
related fixes.
The following changes since commit ace97d26176a3ebc9ec07738450de93eea35975c:
Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze (2015-04-29 06:46:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 2083db7a75792d317a8e726e8be72abea8941d03:
arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targets (2015-05-05 14:32:05 +0200)
----------------------------------------------------------------
Stefan Roese (15):
arm: armada-xp: Move SoC sources to mach-mvebu
arm: armada-xp: Move SoC headers to mach-mvebu/include/mach
arm: mvebu: Move mvebu-common into mach-mvebu
arm: mvebu: Change header macros from ARMADA_XP to MVEBU
arm: mvebu: Remove unreferenced define
arm: mvebu: Only define MV88F78X60 for Armada XP
arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common header
arm: mvebu: Add basic Armada 38x support
arm: mvebu: Change network init code to allow a more flexible setup
arm: mvebu: Remove coherency configuration
arm: mvebu: mv-common.h: Add CONFIG_PREBOOT
arm: mvebu: Add d-cache invalidate before enabling the d-cache
arm: mvebu: Add Armada A38x DB-88F6820-GP board support
arm: mvebu: db-mv784mp-gp: Fix ECC I2C address
arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targets
arch/arm/Kconfig | 6 ++
arch/arm/Makefile | 5 +-
arch/arm/cpu/armv7/Makefile | 1 -
arch/arm/cpu/armv7/armada-xp/Makefile | 9 --
arch/arm/mach-mvebu/Makefile | 24 +++++
arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/cpu.c | 96 +++++++++++++++----
arch/arm/{mvebu-common => mach-mvebu}/dram.c | 0
arch/arm/{mvebu-common => mach-mvebu}/gpio.c | 0
.../include/mach}/config.h | 17 ++--
.../include/mach}/cpu.h | 13 ++-
.../include/mach}/soc.h | 20 ++--
.../armv7/armada-xp => mach-mvebu}/lowlevel_spl.S | 0
arch/arm/{mvebu-common => mach-mvebu}/mbus.c | 3 -
.../{mvebu-common => mach-mvebu}/serdes/Makefile | 0
.../serdes/board_env_spec.h | 0
.../serdes/high_speed_env_lib.c | 0
.../serdes/high_speed_env_spec.c | 0
.../serdes/high_speed_env_spec.h | 0
arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/spl.c | 0
arch/arm/{mvebu-common => mach-mvebu}/timer.c | 0
.../{mvebu-common => mach-mvebu}/u-boot-spl.lds | 0
board/Marvell/db-88f6820-gp/Kconfig | 15 +++
board/Marvell/db-88f6820-gp/Makefile | 7 ++
board/Marvell/db-88f6820-gp/binary.0 | 16 ++++
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 103 +++++++++++++++++++++
board/Marvell/db-88f6820-gp/kwbimage.cfg | 12 +++
board/Marvell/db-mv784mp-gp/Kconfig | 2 +-
board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c | 3 +-
board/maxbcm/Kconfig | 2 +-
board/maxbcm/maxbcm.c | 2 +-
configs/db-88f6820-gp_defconfig | 2 +
drivers/ddr/mvebu/ddr3_axp.h | 2 +-
include/configs/db-88f6820-gp.h | 72 ++++++++++++++
include/configs/db-mv784mp-gp.h | 3 +-
include/configs/maxbcm.h | 3 +-
include/configs/mv-common.h | 1 +
36 files changed, 379 insertions(+), 60 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/armada-xp/Makefile
create mode 100644 arch/arm/mach-mvebu/Makefile
rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/cpu.c (71%)
rename arch/arm/{mvebu-common => mach-mvebu}/dram.c (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/gpio.c (100%)
rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/config.h (86%)
rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/cpu.h (93%)
rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/soc.h (81%)
rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/lowlevel_spl.S (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/mbus.c (99%)
rename arch/arm/{mvebu-common => mach-mvebu}/serdes/Makefile (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/serdes/board_env_spec.h (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_lib.c (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_spec.c (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_spec.h (100%)
rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/spl.c (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/timer.c (100%)
rename arch/arm/{mvebu-common => mach-mvebu}/u-boot-spl.lds (100%)
create mode 100644 board/Marvell/db-88f6820-gp/Kconfig
create mode 100644 board/Marvell/db-88f6820-gp/Makefile
create mode 100644 board/Marvell/db-88f6820-gp/binary.0
create mode 100644 board/Marvell/db-88f6820-gp/db-88f6820-gp.c
create mode 100644 board/Marvell/db-88f6820-gp/kwbimage.cfg
create mode 100644 configs/db-88f6820-gp_defconfig
create mode 100644 include/configs/db-88f6820-gp.h
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-04-11 9:53 Luka Perkov
@ 2015-04-11 11:27 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-04-11 11:27 UTC (permalink / raw)
To: u-boot
On Sat, Apr 11, 2015 at 09:53:58AM +0000, Luka Perkov wrote:
> Hi Tom,
>
> this series contains one fix from Stefan.
>
> The following changes since commit c175f306b3f8885965f63ff6c71df5c0f899b4c9:
>
> Merge git://git.denx.de/u-boot-arc (2015-04-10 12:39:13 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 4adb46a3144248b2d8b8a68684bee648815c4ada:
>
> arm: armada-xp: Fix SPL for AXP by using save_boot_params_ret (2015-04-11 11:49:00 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150411/ded32deb/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-04-11 9:53 Luka Perkov
2015-04-11 11:27 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-04-11 9:53 UTC (permalink / raw)
To: u-boot
Hi Tom,
this series contains one fix from Stefan.
The following changes since commit c175f306b3f8885965f63ff6c71df5c0f899b4c9:
Merge git://git.denx.de/u-boot-arc (2015-04-10 12:39:13 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 4adb46a3144248b2d8b8a68684bee648815c4ada:
arm: armada-xp: Fix SPL for AXP by using save_boot_params_ret (2015-04-11 11:49:00 +0200)
----------------------------------------------------------------
Stefan Roese (1):
arm: armada-xp: Fix SPL for AXP by using save_boot_params_ret
arch/arm/cpu/armv7/armada-xp/lowlevel_spl.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-03-05 21:14 Luka Perkov
@ 2015-03-06 15:43 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-03-06 15:43 UTC (permalink / raw)
To: u-boot
On Thu, Mar 05, 2015 at 09:14:04PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> this series contains small kirkwood/marvell fixes. Please pull when you
> find the time.
>
> The following changes since commit 694cc87b76b1063a2a7a8bd1809e990df0a469f8:
>
> arm, da8xx: convert ipam390 board to generic board support (2015-03-05 10:08:13 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to dbfc4c93f4d8cb495a4fd83b7edbbc3db1e04816:
>
> dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb (2015-03-05 22:09:00 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150306/1f7a829d/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-03-05 21:14 Luka Perkov
2015-03-06 15:43 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-03-05 21:14 UTC (permalink / raw)
To: u-boot
Hi Tom,
this series contains small kirkwood/marvell fixes. Please pull when you
find the time.
The following changes since commit 694cc87b76b1063a2a7a8bd1809e990df0a469f8:
arm, da8xx: convert ipam390 board to generic board support (2015-03-05 10:08:13 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to dbfc4c93f4d8cb495a4fd83b7edbbc3db1e04816:
dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb (2015-03-05 22:09:00 +0100)
----------------------------------------------------------------
Ajay Bhargav (2):
arm: gplugd: convert to generic board
arm: aspenite: convert to generic board
Chris Packham (1):
kwbimage: align v1 binary header to 4B
Ian Campbell (2):
dreamplug: switch to GENERIC_BOARD
dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb
include/configs/aspenite.h | 5 +++++
include/configs/dreamplug.h | 4 ++++
include/configs/gplugd.h | 5 +++++
tools/kwbimage.c | 1 +
4 files changed, 15 insertions(+)
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-02-06 16:35 Luka Perkov
@ 2015-02-09 20:26 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-02-09 20:26 UTC (permalink / raw)
To: u-boot
On Fri, Feb 06, 2015 at 04:35:54PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> this series contains the last bits of pending kirkwood/mvebu patches that I'm
> aware of. The changes from Gerald are minimal and I've merged Stefan's series
> which have reached v3 on the list.
>
> The following changes since commit 7f641d53bbb3a426a3bfb132d8346153e86a9d08:
>
> Merge branch 'master' of git://git.denx.de/u-boot-ubi (2015-02-04 13:30:00 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to 68102b81e8fb699087ec5757a75676c6c65af3fd:
>
> arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support (2015-02-06 17:25:08 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150209/7060b31c/attachment.sig>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-02-06 16:35 Luka Perkov
2015-02-09 20:26 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-02-06 16:35 UTC (permalink / raw)
To: u-boot
Hi Tom,
this series contains the last bits of pending kirkwood/mvebu patches that I'm
aware of. The changes from Gerald are minimal and I've merged Stefan's series
which have reached v3 on the list.
The following changes since commit 7f641d53bbb3a426a3bfb132d8346153e86a9d08:
Merge branch 'master' of git://git.denx.de/u-boot-ubi (2015-02-04 13:30:00 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to 68102b81e8fb699087ec5757a75676c6c65af3fd:
arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support (2015-02-06 17:25:08 +0100)
----------------------------------------------------------------
DrEagle (3):
kirkwood: sheevaplug: fix style
kirkwood: sheevaplug: fix multiple defines
kirkwood: sheevaplug: add FDT support
Stefan Roese (11):
arm: armada-xp: Change built target to include the SPL binary as bin_hdr
arm: mvebu: Placeholder bin_hdr file can now be removed
arm: maxbcm: Enable SPL to include DDR training code into U-Boot
arm: db-mv784mp-gp: Enable SPL to include DDR training code into U-Boot
Makefile: Add another kwb build target used on Marvell Armada-XP (AXP)
tools: kwbimage: Support u-boot.img padding to CONFIG_SYS_SPI_U_BOOT_OFFS
scripts/Makefile.spl: Add MVEBU DDR code to SPL
arm: armada-xp: Add SPL support used to include the DDR training code
arm: mvebu: Add Serdes PHY config code
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr
arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support
Makefile | 6 +
arch/arm/Kconfig | 2 +
arch/arm/cpu/armv7/armada-xp/Makefile | 2 +
arch/arm/cpu/armv7/armada-xp/lowlevel_spl.S | 62 +
arch/arm/cpu/armv7/armada-xp/spl.c | 38 +
arch/arm/include/asm/arch-armada-xp/config.h | 4 +
arch/arm/include/asm/arch-armada-xp/cpu.h | 16 +
arch/arm/mvebu-common/Makefile | 2 +
arch/arm/mvebu-common/serdes/Makefile | 6 +
arch/arm/mvebu-common/serdes/board_env_spec.h | 262 ++++
arch/arm/mvebu-common/serdes/high_speed_env_lib.c | 1572 +++++++++++++++++++
arch/arm/mvebu-common/serdes/high_speed_env_spec.c | 185 +++
arch/arm/mvebu-common/serdes/high_speed_env_spec.h | 87 ++
arch/arm/mvebu-common/u-boot-spl.lds | 57 +
board/Marvell/db-mv784mp-gp/binary.0 | 17 -
board/Marvell/db-mv784mp-gp/kwbimage.cfg | 2 +-
board/maxbcm/binary.0 | 17 -
board/maxbcm/kwbimage.cfg | 2 +-
board/maxbcm/maxbcm.c | 85 +-
configs/db-mv784mp-gp_defconfig | 5 +-
configs/maxbcm_defconfig | 5 +-
drivers/ddr/mvebu/Makefile | 14 +
drivers/ddr/mvebu/ddr3_axp.h | 510 +++++++
drivers/ddr/mvebu/ddr3_axp_config.h | 146 ++
drivers/ddr/mvebu/ddr3_axp_mc_static.h | 284 ++++
drivers/ddr/mvebu/ddr3_axp_training_static.h | 770 ++++++++++
drivers/ddr/mvebu/ddr3_axp_vars.h | 226 +++
drivers/ddr/mvebu/ddr3_dfs.c | 1552 +++++++++++++++++++
drivers/ddr/mvebu/ddr3_dqs.c | 1374 +++++++++++++++++
drivers/ddr/mvebu/ddr3_hw_training.c | 1115 ++++++++++++++
drivers/ddr/mvebu/ddr3_hw_training.h | 392 +++++
drivers/ddr/mvebu/ddr3_init.c | 1219 +++++++++++++++
drivers/ddr/mvebu/ddr3_init.h | 143 ++
drivers/ddr/mvebu/ddr3_patterns_64bit.h | 924 ++++++++++++
drivers/ddr/mvebu/ddr3_pbs.c | 1592 ++++++++++++++++++++
drivers/ddr/mvebu/ddr3_read_leveling.c | 1214 +++++++++++++++
drivers/ddr/mvebu/ddr3_sdram.c | 669 ++++++++
drivers/ddr/mvebu/ddr3_spd.c | 1300 ++++++++++++++++
drivers/ddr/mvebu/ddr3_write_leveling.c | 1366 +++++++++++++++++
drivers/ddr/mvebu/xor.c | 436 ++++++
drivers/ddr/mvebu/xor.h | 70 +
drivers/ddr/mvebu/xor_regs.h | 103 ++
include/configs/db-mv784mp-gp.h | 49 +
include/configs/maxbcm.h | 49 +
include/configs/sheevaplug.h | 7 +-
scripts/Makefile.spl | 1 +
tools/kwbimage.c | 11 +
47 files changed, 17925 insertions(+), 45 deletions(-)
create mode 100644 arch/arm/cpu/armv7/armada-xp/lowlevel_spl.S
create mode 100644 arch/arm/cpu/armv7/armada-xp/spl.c
create mode 100644 arch/arm/mvebu-common/serdes/Makefile
create mode 100644 arch/arm/mvebu-common/serdes/board_env_spec.h
create mode 100644 arch/arm/mvebu-common/serdes/high_speed_env_lib.c
create mode 100644 arch/arm/mvebu-common/serdes/high_speed_env_spec.c
create mode 100644 arch/arm/mvebu-common/serdes/high_speed_env_spec.h
create mode 100644 arch/arm/mvebu-common/u-boot-spl.lds
delete mode 100644 board/Marvell/db-mv784mp-gp/binary.0
delete mode 100644 board/maxbcm/binary.0
create mode 100644 drivers/ddr/mvebu/Makefile
create mode 100644 drivers/ddr/mvebu/ddr3_axp.h
create mode 100644 drivers/ddr/mvebu/ddr3_axp_config.h
create mode 100644 drivers/ddr/mvebu/ddr3_axp_mc_static.h
create mode 100644 drivers/ddr/mvebu/ddr3_axp_training_static.h
create mode 100644 drivers/ddr/mvebu/ddr3_axp_vars.h
create mode 100644 drivers/ddr/mvebu/ddr3_dfs.c
create mode 100644 drivers/ddr/mvebu/ddr3_dqs.c
create mode 100644 drivers/ddr/mvebu/ddr3_hw_training.c
create mode 100644 drivers/ddr/mvebu/ddr3_hw_training.h
create mode 100644 drivers/ddr/mvebu/ddr3_init.c
create mode 100644 drivers/ddr/mvebu/ddr3_init.h
create mode 100644 drivers/ddr/mvebu/ddr3_patterns_64bit.h
create mode 100644 drivers/ddr/mvebu/ddr3_pbs.c
create mode 100644 drivers/ddr/mvebu/ddr3_read_leveling.c
create mode 100644 drivers/ddr/mvebu/ddr3_sdram.c
create mode 100644 drivers/ddr/mvebu/ddr3_spd.c
create mode 100644 drivers/ddr/mvebu/ddr3_write_leveling.c
create mode 100644 drivers/ddr/mvebu/xor.c
create mode 100644 drivers/ddr/mvebu/xor.h
create mode 100644 drivers/ddr/mvebu/xor_regs.h
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
2015-01-25 23:42 Luka Perkov
@ 2015-01-27 11:51 ` Tom Rini
0 siblings, 0 replies; 32+ messages in thread
From: Tom Rini @ 2015-01-27 11:51 UTC (permalink / raw)
To: u-boot
On Sun, Jan 25, 2015 at 11:42:24PM +0000, Luka Perkov wrote:
> Hi Albert,
>
> this series contains pending kirkwood patches that have been posted on
> the mailing list for some time now.
>
>
> The following changes since commit 37b608a52dcb13312a4f7ccea199cd6bac76d298:
>
> powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200 (2015-01-23 16:56:09 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git master
>
> for you to fetch changes up to 361b3d8613f57e137a9048ef69e58e9bcaf51b78:
>
> marvell: kirkwood: guruplug refresh for newer kernel (2015-01-26 00:25:29 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150127/c74eef37/attachment.pgp>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [U-Boot] Please pull u-boot-marvell master
@ 2015-01-25 23:42 Luka Perkov
2015-01-27 11:51 ` Tom Rini
0 siblings, 1 reply; 32+ messages in thread
From: Luka Perkov @ 2015-01-25 23:42 UTC (permalink / raw)
To: u-boot
Hi Albert,
this series contains pending kirkwood patches that have been posted on
the mailing list for some time now.
The following changes since commit 37b608a52dcb13312a4f7ccea199cd6bac76d298:
powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200 (2015-01-23 16:56:09 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
for you to fetch changes up to 361b3d8613f57e137a9048ef69e58e9bcaf51b78:
marvell: kirkwood: guruplug refresh for newer kernel (2015-01-26 00:25:29 +0100)
----------------------------------------------------------------
Gerald Kerma (1):
marvell: kirkwood: guruplug refresh for newer kernel
Luka Perkov (9):
cosmetic: kirkwood: style fixes in kwbimage.cfg files
kirkwood: define empty CONFIG_MVGBE_PORTS by default
ARM: kirkwood: fix cpu info for 6282 device id
kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define
kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define
kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define
kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define
kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define
arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 11 +++--
board/iomega/iconnect/kwbimage.cfg | 4 +-
board/raidsonic/ib62x0/kwbimage.cfg | 22 ++++-----
drivers/net/mvgbe.c | 4 ++
include/configs/dockstar.h | 2 +
include/configs/goflexhome.h | 2 +
include/configs/guruplug.h | 84 ++++++++++++++++++++++++++++-------
include/configs/ib62x0.h | 2 +
include/configs/iconnect.h | 2 +
include/configs/pogo_e02.h | 2 +
include/configs/sheevaplug.h | 2 +
11 files changed, 104 insertions(+), 33 deletions(-)
Regards,
Luka
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2015-11-30 20:17 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-02-16 12:50 [U-Boot] Please pull u-boot-marvell master Luka Perkov
2015-02-16 17:41 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2015-11-29 21:20 Luka Perkov
2015-11-30 20:17 ` Tom Rini
2015-11-17 22:46 Luka Perkov
2015-11-18 0:50 ` Tom Rini
2015-10-21 0:29 Luka Perkov
2015-10-21 13:10 ` Tom Rini
2015-10-01 0:07 Luka Perkov
2015-10-03 0:35 ` Tom Rini
2015-08-17 16:56 Luka Perkov
2015-08-18 0:54 ` Tom Rini
2015-07-24 7:56 Luka Perkov
2015-07-25 19:50 ` Tom Rini
[not found] <20150723063510.GA1896@localhost>
2015-07-23 7:29 ` Luka Perkov
2015-07-23 6:35 Luka Perkov
2015-07-10 12:59 Luka Perkov
2015-07-10 19:03 ` Tom Rini
2015-06-28 15:58 Luka Perkov
2015-06-29 0:36 ` Tom Rini
2015-06-14 15:59 Luka Perkov
2015-06-15 15:18 ` Tom Rini
2015-05-05 12:50 Luka Perkov
2015-05-05 23:59 ` Tom Rini
2015-04-11 9:53 Luka Perkov
2015-04-11 11:27 ` Tom Rini
2015-03-05 21:14 Luka Perkov
2015-03-06 15:43 ` Tom Rini
2015-02-06 16:35 Luka Perkov
2015-02-09 20:26 ` Tom Rini
2015-01-25 23:42 Luka Perkov
2015-01-27 11:51 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.