* i915 driver doesn't find all Modelines that nouveau driver finds
@ 2015-03-01 19:12 Brian J. Murrell
2015-03-02 9:07 ` Chris Wilson
0 siblings, 1 reply; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-01 19:12 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 46165 bytes --]
I have a dual-head set up here which I've recently changed the
motherboard out and with it, removed an nVidia GT210 and replaced it
with the on-board graphics that came on this:
CPU: Intel(R) Celeron(R) CPU G1840 @ 2.80GHz (Family: 6, Model: 60, Stepping: 3)
The monitors have remained the same through the changeout.
What I am finding is that the nouveau driver on the nVidia GT210 found a
1600x1200@75Hz modeline for the ViewSonic PS790-2 monitor attached:
[ 207.432] (II) NOUVEAU(1): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz UeP)
but the intel driver doe not. Both drivers found all remaining
Modelines.
I tried adding this Modeline to my xorg.conf:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "ViewSonic PS790-2"
HorizSync 30.0 - 97.0
VertRefresh 50.0 - 180.0
Option "DPMS"
Modeline "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # (93.8 kHz UeP)
EndSection
But the second monitor just refused to be added to the server. Here's
the Xorg startup log for that:
[ 42006.223]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 42006.223] X Protocol Version 11, Revision 0
[ 42006.223] Build Operating System: 3.17.8-300.bz1178975.fc21.x86_64
[ 42006.223] Current Operating System: Linux pc.interlinx.bc.ca 3.18.7-200.fc21.x86_64 #1 SMP Wed Feb 11 21:53:17 UTC 2015 x86_64
[ 42006.223] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.7-200.fc21.x86_64 root=/dev/mapper/rootvol-fedora_root ro rd.md=0 rd.dm=0 rd.lvm.lv=rootvol/swap vconsole.keymap=us rd.lvm.lv=rootvol/fedora_root rd.lvm.lv=rootvol/fedora_usr rd.lvm.lv=rootvol/fedora_var rd.luks=0 vconsole.font=latarcyrheb-sun16 rhgb quiet console=tty0 console=ttyS0,115200 nord.nodriver.noblacklist=nonouveau nouveau.modeset=0 rd.driver.blacklist=nouveau gfxpayload=vga=normal LANG=en_US.UTF-8
[ 42006.223] Build Date: 31 January 2015 11:23:27PM
[ 42006.223] Build ID: xorg-x11-server 1.16.3-2.fc21
[ 42006.223] Current version of pixman: 0.32.6
[ 42006.223] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42006.223] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42006.224] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:05:58 2015
[ 42006.224] (==) Using config file: "/etc/X11/xorg.conf"
[ 42006.224] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42006.224] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 42006.224] (==) ServerLayout "Layout0"
[ 42006.224] (**) |-->Screen "Screen0" (0)
[ 42006.224] (**) | |-->Monitor "Monitor0"
[ 42006.224] (**) | |-->Device "Device0"
[ 42006.224] (**) |-->Screen "Screen1" (1)
[ 42006.224] (**) | |-->Monitor "Monitor1"
[ 42006.224] (**) | |-->Device "Device1"
[ 42006.224] (==) Automatically adding devices
[ 42006.224] (==) Automatically enabling devices
[ 42006.224] (==) Automatically adding GPU devices
[ 42006.224] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 42006.224] (**) ModulePath set to "/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 42006.224] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 42006.224] (II) Loader magic: 0x81de40
[ 42006.224] (II) Module ABI versions:
[ 42006.224] X.Org ANSI C Emulation: 0.4
[ 42006.224] X.Org Video Driver: 18.0
[ 42006.224] X.Org XInput driver : 21.0
[ 42006.224] X.Org Server Extension : 8.0
[ 42006.228] (EE) systemd-logind: failed to get session: PID 7475 does not belong to any known session
[ 42006.229] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 42006.230] (--) PCI:*(0:0:2:0) 8086:0402:1458:d000 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 42006.230] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 42006.230] (II) "glx" will be loaded by default.
[ 42006.230] (II) LoadModule: "glx"
[ 42006.230] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 42006.231] (II) Module glx: vendor="X.Org Foundation"
[ 42006.231] compiled for 1.16.3, module version = 1.0.0
[ 42006.231] ABI class: X.Org Server Extension, version 8.0
[ 42006.231] (==) AIGLX enabled
[ 42006.231] (II) LoadModule: "intel"
[ 42006.231] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 42006.231] (II) Module intel: vendor="X.Org Foundation"
[ 42006.231] compiled for 1.16.1, module version = 2.99.916
[ 42006.231] Module class: X.Org Video Driver
[ 42006.231] ABI class: X.Org Video Driver, version 18.0
[ 42006.231] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 42006.232] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 42006.232] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 42006.232] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 42006.232] (++) using VT number 1
[ 42006.232] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 42006.233] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 42006.233] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 42006.233] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 42006.233] (II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 42006.233] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 42006.233] (==) intel(0): RGB weight 888
[ 42006.233] (==) intel(0): Default visual is TrueColor
[ 42006.233] (**) intel(0): Option "AccelMethod" "sna"
[ 42006.233] (**) intel(0): Option "ZaphodHeads" "HDMI1"
[ 42006.233] (II) intel(0): Output HDMI1 using monitor section Monitor0
[ 42006.233] (II) intel(0): Enabled output HDMI1
[ 42006.233] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 42006.233] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 42006.234] (II) intel(0): Enabled output VIRTUAL1
[ 42006.247] (II) intel(0): EDID for output HDMI1
[ 42006.247] (II) intel(0): Manufacturer: NEC Model: 665c Serial#: 16843009
[ 42006.247] (II) intel(0): Year: 2004 Week: 35
[ 42006.247] (II) intel(0): EDID Version: 1.3
[ 42006.247] (II) intel(0): Digital Display Input
[ 42006.247] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 31
[ 42006.247] (II) intel(0): Gamma: 2.20
[ 42006.247] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 42006.247] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 42006.247] (II) intel(0): Default color space is primary color space
[ 42006.247] (II) intel(0): First detailed timing is preferred mode
[ 42006.247] (II) intel(0): redX: 0.638 redY: 0.342 greenX: 0.293 greenY: 0.609
[ 42006.247] (II) intel(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 42006.247] (II) intel(0): Supported established timings:
[ 42006.247] (II) intel(0): 720x400@70Hz
[ 42006.247] (II) intel(0): 640x480@60Hz
[ 42006.247] (II) intel(0): 640x480@67Hz
[ 42006.247] (II) intel(0): 640x480@72Hz
[ 42006.247] (II) intel(0): 640x480@75Hz
[ 42006.247] (II) intel(0): 800x600@56Hz
[ 42006.247] (II) intel(0): 800x600@60Hz
[ 42006.247] (II) intel(0): 800x600@72Hz
[ 42006.247] (II) intel(0): 800x600@75Hz
[ 42006.247] (II) intel(0): 832x624@75Hz
[ 42006.247] (II) intel(0): 1024x768@60Hz
[ 42006.247] (II) intel(0): 1024x768@70Hz
[ 42006.247] (II) intel(0): 1024x768@75Hz
[ 42006.247] (II) intel(0): 1280x1024@75Hz
[ 42006.247] (II) intel(0): 1152x864@75Hz
[ 42006.247] (II) intel(0): Manufacturer's mask: 0
[ 42006.247] (II) intel(0): Supported standard timings:
[ 42006.247] (II) intel(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 42006.247] (II) intel(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 42006.247] (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 42006.247] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 42006.247] (II) intel(0): #4: hsize: 1280 vsize 960 refresh: 75 vid: 20353
[ 42006.247] (II) intel(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 42006.247] (II) intel(0): #6: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
[ 42006.247] (II) intel(0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 42006.247] (II) intel(0): Supported detailed timing:
[ 42006.247] (II) intel(0): clock: 162.0 MHz Image Size: 408 x 306 mm
[ 42006.247] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
[ 42006.247] (II) intel(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
[ 42006.247] (II) intel(0): Ranges: V min: 56 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 175 MHz
[ 42006.247] (II) intel(0): Monitor name: LCD200VX
[ 42006.247] (II) intel(0): Serial No: 48000585QA
[ 42006.247] (II) intel(0): EDID (in hex):
[ 42006.247] (II) intel(0): 00ffffffffffff0038a35c6601010101
[ 42006.247] (II) intel(0): 230e010380291f78ee60e5a3574b9c25
[ 42006.247] (II) intel(0): 115054bfef80315945596159714f814f
[ 42006.247] (II) intel(0): 81808199a940483f403062b0324040c0
[ 42006.247] (II) intel(0): 130098321100001e000000fd0038551f
[ 42006.247] (II) intel(0): 5c11000a202020202020000000fc004c
[ 42006.247] (II) intel(0): 434432303056580a20202020000000ff
[ 42006.247] (II) intel(0): 00343830303035383551410a202000e5
[ 42006.248] (II) intel(0): Printing probed modes for output HDMI1
[ 42006.248] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP)
[ 42006.248] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
[ 42006.248] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 42006.248] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 42006.248] (II) intel(0): Modeline "1280x960"x75.0 129.94 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.2 kHz)
[ 42006.248] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 42006.248] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 42006.248] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 42006.248] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 42006.248] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 42006.248] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 42006.248] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 42006.248] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 42006.248] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 42006.248] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42006.248] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 42006.248] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 42006.248] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 42006.248] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 42006.248] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 42006.248] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42006.248] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 42006.248] (II) intel(0): EDID for output VIRTUAL1
[ 42006.248] (II) intel(0): Output HDMI1 connected
[ 42006.248] (II) intel(0): Output VIRTUAL1 disconnected
[ 42006.248] (II) intel(0): Using exact sizes for initial modes
[ 42006.248] (II) intel(0): Output HDMI1 using initial mode 1600x1200 +0+0
[ 42006.248] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 42006.248] (==) intel(0): TearFree disabled
[ 42006.248] (**) intel(0): Display dimensions: (317, 423) mm
[ 42006.248] (**) intel(0): DPI set to (128, 72)
[ 42006.248] (II) Loading sub module "dri3"
[ 42006.248] (II) LoadModule: "dri3"
[ 42006.248] (II) Module "dri3" already built-in
[ 42006.248] (II) Loading sub module "dri2"
[ 42006.248] (II) LoadModule: "dri2"
[ 42006.248] (II) Module "dri2" already built-in
[ 42006.248] (II) Loading sub module "present"
[ 42006.248] (II) LoadModule: "present"
[ 42006.248] (II) Module "present" already built-in
[ 42006.248] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 42006.248] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 42006.248] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 42006.248] (==) intel(1): RGB weight 888
[ 42006.248] (==) intel(1): Default visual is TrueColor
[ 42006.248] (**) intel(1): Option "AccelMethod" "sna"
[ 42006.248] (**) intel(1): Option "ZaphodHeads" "VGA1"
[ 42006.248] (II) intel(1): Output VGA1 using monitor section Monitor1
[ 42006.248] (II) intel(1): Enabled output VGA1
[ 42006.248] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 42006.249] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 42006.249] (II) intel(1): Enabled output VIRTUAL1
[ 42006.262] (II) intel(1): EDID for output VGA1
[ 42006.262] (II) intel(1): Manufacturer: VSC Model: 4a4d Serial#: 20166
[ 42006.262] (II) intel(1): Year: 1999 Week: 50
[ 42006.262] (II) intel(1): EDID Version: 1.2
[ 42006.262] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 42006.262] (II) intel(1): Sync: Separate Composite SyncOnGreen
[ 42006.262] (II) intel(1): Max Image Size [cm]: horiz.: 36 vert.: 27
[ 42006.262] (II) intel(1): Gamma: 2.41
[ 42006.262] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 42006.262] (II) intel(1): First detailed timing is preferred mode
[ 42006.262] (II) intel(1): GTF timings supported
[ 42006.262] (II) intel(1): redX: 0.635 redY: 0.333 greenX: 0.285 greenY: 0.605
[ 42006.262] (II) intel(1): blueX: 0.152 blueY: 0.068 whiteX: 0.283 whiteY: 0.298
[ 42006.262] (II) intel(1): Supported established timings:
[ 42006.262] (II) intel(1): 720x400@70Hz
[ 42006.262] (II) intel(1): 720x400@88Hz
[ 42006.262] (II) intel(1): 640x480@60Hz
[ 42006.262] (II) intel(1): 640x480@67Hz
[ 42006.262] (II) intel(1): 640x480@72Hz
[ 42006.262] (II) intel(1): 640x480@75Hz
[ 42006.262] (II) intel(1): 800x600@56Hz
[ 42006.262] (II) intel(1): 800x600@60Hz
[ 42006.262] (II) intel(1): 800x600@72Hz
[ 42006.262] (II) intel(1): 800x600@75Hz
[ 42006.262] (II) intel(1): 832x624@75Hz
[ 42006.262] (II) intel(1): 1024x768@87Hz (interlaced)
[ 42006.262] (II) intel(1): 1024x768@60Hz
[ 42006.262] (II) intel(1): 1024x768@70Hz
[ 42006.262] (II) intel(1): 1024x768@75Hz
[ 42006.262] (II) intel(1): 1280x1024@75Hz
[ 42006.262] (II) intel(1): 1152x864@75Hz
[ 42006.262] (II) intel(1): Manufacturer's mask: 0
[ 42006.262] (II) intel(1): Supported standard timings:
[ 42006.262] (II) intel(1): #0: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
[ 42006.262] (II) intel(1): #1: hsize: 1600 vsize 1200 refresh: 70 vid: 19113
[ 42006.262] (II) intel(1): #2: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
[ 42006.262] (II) intel(1): #3: hsize: 1280 vsize 960 refresh: 85 vid: 22913
[ 42006.262] (II) intel(1): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 42006.262] (II) intel(1): #5: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 42006.262] (II) intel(1): Supported detailed timing:
[ 42006.262] (II) intel(1): clock: 157.5 MHz Image Size: 352 x 264 mm
[ 42006.262] (II) intel(1): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
[ 42006.262] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
[ 42006.262] (II) intel(1): Serial No: MJ95020166
[ 42006.262] (II) intel(1): Ranges: V min: 50 V max: 180 Hz, H min: 30 H max: 97 kHz, PixClock max 225 MHz
[ 42006.262] (II) intel(1): Monitor name: PS790-2
[ 42006.262] (II) intel(1): EDID (in hex):
[ 42006.262] (II) intel(1): 00ffffffffffff005a634d4ac64e0000
[ 42006.262] (II) intel(1): 320901020e241b8deb9029a255499b27
[ 42006.262] (II) intel(1): 11484cffff80a94fa94a81998159714f
[ 42006.262] (II) intel(1): 615901010101863d00c05100304040a0
[ 42006.262] (II) intel(1): 130060081100001e000000ff004d4a39
[ 42006.262] (II) intel(1): 353032303136360a2020000000fd0032
[ 42006.262] (II) intel(1): b41e6116000a202020202020000000fc
[ 42006.262] (II) intel(1): 0050533739302d320a2020202020008b
[ 42006.262] (II) intel(1): Printing probed modes for output VGA1
[ 42006.262] (II) intel(1): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz UP)
[ 42006.262] (II) intel(1): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz eP)
[ 42006.262] (II) intel(1): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 42006.262] (II) intel(1): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 42006.262] (II) intel(1): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 42006.262] (II) intel(1): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 42006.262] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 42006.262] (II) intel(1): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
[ 42006.262] (II) intel(1): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 42006.262] (II) intel(1): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 42006.262] (II) intel(1): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 42006.262] (II) intel(1): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 42006.262] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 42006.262] (II) intel(1): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 42006.262] (II) intel(1): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 42006.262] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 42006.262] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 42006.262] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 42006.262] (II) intel(1): Modeline "1024x768i"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz e)
[ 42006.262] (II) intel(1): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 42006.262] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 42006.262] (II) intel(1): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 42006.262] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 42006.262] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 42006.262] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42006.262] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 42006.262] (II) intel(1): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 42006.262] (II) intel(1): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 42006.262] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 42006.262] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 42006.262] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 42006.262] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42006.262] (II) intel(1): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz e)
[ 42006.262] (II) intel(1): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
[ 42006.262] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 42006.262] (II) intel(1): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
[ 42006.262] (II) intel(1): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
[ 42006.262] (II) intel(1): EDID for output VIRTUAL1
[ 42006.262] (II) intel(1): Output VGA1 connected
[ 42006.262] (II) intel(1): Output VIRTUAL1 disconnected
[ 42006.262] (II) intel(1): Using user preference for initial modes
[ 42006.262] (II) intel(1): Output VGA1 using initial mode 1600x1200 +0+0
[ 42006.262] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 42006.262] (==) intel(1): TearFree disabled
[ 42006.262] (==) intel(1): DPI set to (96, 96)
[ 42006.262] (II) Loading sub module "dri3"
[ 42006.262] (II) LoadModule: "dri3"
[ 42006.262] (II) Module "dri3" already built-in
[ 42006.262] (II) Loading sub module "dri2"
[ 42006.262] (II) LoadModule: "dri2"
[ 42006.262] (II) Module "dri2" already built-in
[ 42006.262] (II) Loading sub module "present"
[ 42006.262] (II) LoadModule: "present"
[ 42006.262] (II) Module "present" already built-in
[ 42006.263] (==) Depth 24 pixmap format is 32 bpp
[ 42006.263] (II) intel(0): SNA initialized with Haswell (gen7.5, gt1) backend
[ 42006.263] (==) intel(0): Backing store enabled
[ 42006.263] (==) intel(0): Silken mouse enabled
[ 42006.263] (II) intel(0): HW Cursor enabled
[ 42006.263] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 42006.263] (**) intel(0): DPMS enabled
[ 42006.263] (==) intel(0): display hotplug detection enabled
[ 42006.263] (II) intel(0): [DRI2] Setup complete
[ 42006.263] (II) intel(0): [DRI2] DRI driver: i965
[ 42006.263] (II) intel(0): [DRI2] VDPAU driver: i965
[ 42006.263] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 42006.263] (II) intel(0): hardware support for Present enabled
[ 42006.263] (--) RandR disabled
[ 42006.263] (II) intel(1): SNA initialized with Haswell (gen7.5, gt1) backend
[ 42006.263] (==) intel(1): Backing store enabled
[ 42006.263] (==) intel(1): Silken mouse enabled
[ 42006.263] (II) intel(1): HW Cursor enabled
[ 42006.263] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 42006.263] (**) intel(1): DPMS enabled
[ 42006.263] (==) intel(1): display hotplug detection enabled
[ 42006.263] (II) intel(1): [DRI2] Setup complete
[ 42006.263] (II) intel(1): [DRI2] DRI driver: i965
[ 42006.263] (II) intel(1): [DRI2] VDPAU driver: i965
[ 42006.263] (II) intel(1): direct rendering: DRI2 DRI3 enabled
[ 42006.263] (II) intel(1): hardware support for Present enabled
[ 42006.263] (--) RandR disabled
[ 42006.268] (II) SELinux: Disabled by boolean
[ 42006.288] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 42006.288] (II) AIGLX: enabled GLX_ARB_create_context
[ 42006.288] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 42006.288] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 42006.288] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 42006.288] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 42006.288] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 42006.288] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 42006.288] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 42006.288] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 42006.288] (II) AIGLX: Loaded and initialized i965
[ 42006.288] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 42006.306] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 42006.306] (II) AIGLX: enabled GLX_ARB_create_context
[ 42006.306] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 42006.306] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 42006.306] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 42006.306] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 42006.306] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 42006.306] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 42006.306] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 42006.306] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 42006.306] (II) AIGLX: Loaded and initialized i965
[ 42006.306] (II) GLX: Initialized DRI2 GL provider for screen 1
[ 42006.309] (II) intel(0): switch to mode 1600x1200@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 42006.349] (II) intel(0): Setting screen physical size to 317 x 423
[ 42006.352] (II) intel(1): switch to mode 1600x1200@75.0 on VGA1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 42006.355] (EE) intel(1): failed to set mode: Invalid argument [22]
[ 42006.355] (WW) intel(1): failed to restore desired modes on VT switch
[ 42006.375] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 42006.375] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42006.375] (II) LoadModule: "evdev"
[ 42006.375] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 42006.375] (II) Module evdev: vendor="X.Org Foundation"
[ 42006.375] compiled for 1.16.0, module version = 2.9.0
[ 42006.375] Module class: X.Org XInput Driver
[ 42006.375] ABI class: X.Org XInput driver, version 21.0
[ 42006.375] (II) Using input driver 'evdev' for 'Power Button'
[ 42006.375] (**) Power Button: always reports core events
[ 42006.375] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 42006.376] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 42006.376] (--) evdev: Power Button: Found keys
[ 42006.376] (II) evdev: Power Button: Configuring as keyboard
[ 42006.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 42006.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 42006.376] (**) Option "xkb_rules" "evdev"
[ 42006.376] (**) Option "xkb_model" "pc104"
[ 42006.376] (**) Option "xkb_layout" "us"
[ 42006.391] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 42006.391] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 42006.391] (II) Using input driver 'evdev' for 'Video Bus'
[ 42006.391] (**) Video Bus: always reports core events
[ 42006.391] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 42006.391] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 42006.391] (--) evdev: Video Bus: Found keys
[ 42006.391] (II) evdev: Video Bus: Configuring as keyboard
[ 42006.391] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event4"
[ 42006.391] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 42006.391] (**) Option "xkb_rules" "evdev"
[ 42006.391] (**) Option "xkb_model" "pc104"
[ 42006.391] (**) Option "xkb_layout" "us"
[ 42006.391] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 42006.391] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42006.391] (II) Using input driver 'evdev' for 'Power Button'
[ 42006.391] (**) Power Button: always reports core events
[ 42006.391] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 42006.391] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 42006.391] (--) evdev: Power Button: Found keys
[ 42006.391] (II) evdev: Power Button: Configuring as keyboard
[ 42006.391] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 42006.391] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 42006.391] (**) Option "xkb_rules" "evdev"
[ 42006.391] (**) Option "xkb_model" "pc104"
[ 42006.391] (**) Option "xkb_layout" "us"
[ 42006.392] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[ 42006.392] (II) No input driver specified, ignoring this device.
[ 42006.392] (II) This device may have been added with another device file.
[ 42006.392] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event7)
[ 42006.392] (II) No input driver specified, ignoring this device.
[ 42006.392] (II) This device may have been added with another device file.
[ 42006.392] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event8)
[ 42006.392] (II) No input driver specified, ignoring this device.
[ 42006.392] (II) This device may have been added with another device file.
[ 42006.392] (II) config/udev: Adding input device Bluetooth Mouse M557 (/dev/input/event13)
[ 42006.392] (**) Bluetooth Mouse M557: Applying InputClass "evdev pointer catchall"
[ 42006.392] (**) Bluetooth Mouse M557: Applying InputClass "evdev keyboard catchall"
[ 42006.392] (II) Using input driver 'evdev' for 'Bluetooth Mouse M557'
[ 42006.392] (**) Bluetooth Mouse M557: always reports core events
[ 42006.392] (**) evdev: Bluetooth Mouse M557: Device: "/dev/input/event13"
[ 42006.392] (--) evdev: Bluetooth Mouse M557: Vendor 0x46d Product 0xb010
[ 42006.392] (--) evdev: Bluetooth Mouse M557: Found 12 mouse buttons
[ 42006.392] (--) evdev: Bluetooth Mouse M557: Found scroll wheel(s)
[ 42006.392] (--) evdev: Bluetooth Mouse M557: Found relative axes
[ 42006.392] (--) evdev: Bluetooth Mouse M557: Found x and y relative axes
[ 42006.392] (--) evdev: Bluetooth Mouse M557: Found keys
[ 42006.392] (II) evdev: Bluetooth Mouse M557: Configuring as mouse
[ 42006.392] (II) evdev: Bluetooth Mouse M557: Configuring as keyboard
[ 42006.392] (II) evdev: Bluetooth Mouse M557: Adding scrollwheel support
[ 42006.392] (**) evdev: Bluetooth Mouse M557: YAxisMapping: buttons 4 and 5
[ 42006.392] (**) evdev: Bluetooth Mouse M557: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 42006.393] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:11/0005:046D:B010.0002/input/input14/event13"
[ 42006.393] (II) XINPUT: Adding extended input device "Bluetooth Mouse M557" (type: KEYBOARD, id 9)
[ 42006.393] (**) Option "xkb_rules" "evdev"
[ 42006.393] (**) Option "xkb_model" "pc104"
[ 42006.393] (**) Option "xkb_layout" "us"
[ 42006.393] (II) evdev: Bluetooth Mouse M557: initialized for relative axes.
[ 42006.393] (**) Bluetooth Mouse M557: (accel) keeping acceleration scheme 1
[ 42006.393] (**) Bluetooth Mouse M557: (accel) acceleration profile 0
[ 42006.393] (**) Bluetooth Mouse M557: (accel) acceleration factor: 2.000
[ 42006.393] (**) Bluetooth Mouse M557: (accel) acceleration threshold: 4
[ 42006.393] (II) config/udev: Adding input device Bluetooth Mouse M557 (/dev/input/mouse2)
[ 42006.393] (II) No input driver specified, ignoring this device.
[ 42006.393] (II) This device may have been added with another device file.
[ 42006.393] (II) config/udev: Adding input device Kensington Kensington USB Mouse (/dev/input/event5)
[ 42006.393] (**) Kensington Kensington USB Mouse: Applying InputClass "evdev pointer catchall"
[ 42006.393] (II) Using input driver 'evdev' for 'Kensington Kensington USB Mouse'
[ 42006.393] (**) Kensington Kensington USB Mouse: always reports core events
[ 42006.393] (**) evdev: Kensington Kensington USB Mouse: Device: "/dev/input/event5"
[ 42006.393] (--) evdev: Kensington Kensington USB Mouse: Vendor 0x47d Product 0x1024
[ 42006.393] (--) evdev: Kensington Kensington USB Mouse: Found 3 mouse buttons
[ 42006.394] (--) evdev: Kensington Kensington USB Mouse: Found scroll wheel(s)
[ 42006.394] (--) evdev: Kensington Kensington USB Mouse: Found relative axes
[ 42006.394] (--) evdev: Kensington Kensington USB Mouse: Found x and y relative axes
[ 42006.394] (II) evdev: Kensington Kensington USB Mouse: Configuring as mouse
[ 42006.394] (II) evdev: Kensington Kensington USB Mouse: Adding scrollwheel support
[ 42006.394] (**) evdev: Kensington Kensington USB Mouse: YAxisMapping: buttons 4 and 5
[ 42006.394] (**) evdev: Kensington Kensington USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 42006.394] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:047D:1024.0001/input/input6/event5"
[ 42006.394] (II) XINPUT: Adding extended input device "Kensington Kensington USB Mouse" (type: MOUSE, id 10)
[ 42006.394] (II) evdev: Kensington Kensington USB Mouse: initialized for relative axes.
[ 42006.394] (**) Kensington Kensington USB Mouse: (accel) keeping acceleration scheme 1
[ 42006.394] (**) Kensington Kensington USB Mouse: (accel) acceleration profile 0
[ 42006.394] (**) Kensington Kensington USB Mouse: (accel) acceleration factor: 2.000
[ 42006.394] (**) Kensington Kensington USB Mouse: (accel) acceleration threshold: 4
[ 42006.394] (II) config/udev: Adding input device Kensington Kensington USB Mouse (/dev/input/mouse1)
[ 42006.394] (II) No input driver specified, ignoring this device.
[ 42006.394] (II) This device may have been added with another device file.
[ 42006.394] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[ 42006.394] (II) No input driver specified, ignoring this device.
[ 42006.394] (II) This device may have been added with another device file.
[ 42006.394] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 42006.394] (II) No input driver specified, ignoring this device.
[ 42006.394] (II) This device may have been added with another device file.
[ 42006.394] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[ 42006.394] (II) No input driver specified, ignoring this device.
[ 42006.394] (II) This device may have been added with another device file.
[ 42006.395] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12)
[ 42006.395] (II) No input driver specified, ignoring this device.
[ 42006.395] (II) This device may have been added with another device file.
[ 42006.395] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 42006.395] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 42006.395] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 42006.395] (**) AT Translated Set 2 keyboard: always reports core events
[ 42006.395] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 42006.395] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 42006.395] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 42006.395] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 42006.395] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 42006.395] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 42006.395] (**) Option "xkb_rules" "evdev"
[ 42006.395] (**) Option "xkb_model" "pc104"
[ 42006.395] (**) Option "xkb_layout" "us"
[ 42006.395] (II) config/udev: Adding input device PS2++ Logitech MX Mouse (/dev/input/event3)
[ 42006.395] (**) PS2++ Logitech MX Mouse: Applying InputClass "evdev pointer catchall"
[ 42006.395] (II) Using input driver 'evdev' for 'PS2++ Logitech MX Mouse'
[ 42006.395] (**) PS2++ Logitech MX Mouse: always reports core events
[ 42006.395] (**) evdev: PS2++ Logitech MX Mouse: Device: "/dev/input/event3"
[ 42006.395] (--) evdev: PS2++ Logitech MX Mouse: Vendor 0x2 Product 0x2
[ 42006.395] (--) evdev: PS2++ Logitech MX Mouse: Found 12 mouse buttons
[ 42006.395] (--) evdev: PS2++ Logitech MX Mouse: Found scroll wheel(s)
[ 42006.395] (--) evdev: PS2++ Logitech MX Mouse: Found relative axes
[ 42006.395] (--) evdev: PS2++ Logitech MX Mouse: Found x and y relative axes
[ 42006.395] (II) evdev: PS2++ Logitech MX Mouse: Configuring as mouse
[ 42006.395] (II) evdev: PS2++ Logitech MX Mouse: Adding scrollwheel support
[ 42006.395] (**) evdev: PS2++ Logitech MX Mouse: YAxisMapping: buttons 4 and 5
[ 42006.395] (**) evdev: PS2++ Logitech MX Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 42006.395] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event3"
[ 42006.395] (II) XINPUT: Adding extended input device "PS2++ Logitech MX Mouse" (type: MOUSE, id 12)
[ 42006.395] (II) evdev: PS2++ Logitech MX Mouse: initialized for relative axes.
[ 42006.395] (**) PS2++ Logitech MX Mouse: (accel) keeping acceleration scheme 1
[ 42006.395] (**) PS2++ Logitech MX Mouse: (accel) acceleration profile 0
[ 42006.395] (**) PS2++ Logitech MX Mouse: (accel) acceleration factor: 2.000
[ 42006.395] (**) PS2++ Logitech MX Mouse: (accel) acceleration threshold: 4
[ 42006.396] (II) config/udev: Adding input device PS2++ Logitech MX Mouse (/dev/input/mouse0)
[ 42006.396] (II) No input driver specified, ignoring this device.
[ 42006.396] (II) This device may have been added with another device file.
[ 42006.434] (II) intel(0): resizing framebuffer to 1200x1600
[ 42006.436] (II) intel(0): switch to mode 1600x1200@60.0 on HDMI1 using pipe 0, position (0, 0), rotation right, reflection none
I also noticed the following in the kernel log around the same time:
[42057.100415] ------------[ cut here ]------------
[42057.100450] WARNING: CPU: 1 PID: 7475 at drivers/gpu/drm/i915/intel_display.c:10450 __intel_set_mode+0x15fb/0x16f0 [i915]()
[42057.100451] loop in pipe configuration computation
[42057.100452] Modules linked in: nfsv3 rfcomm rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache fuse hidp xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc bnep hwmon_vid btrfs xor raid6_pq intel_rapl x86_pkg_temp_thermal coretemp kvm_intel kvm crct10dif_pclmul ppdev iTCO_wdt crc32_pclmul iTCO_vendor_support crc32c_intel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi usblp btusb snd_hda_intel snd_hda_controller bluetooth snd_hda_codec rfkill ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer i2c_i801 snd mei_me mei serio_raw soundcore shpchp lpc_ich mfd_core parport_pc parport tpm_infineon tpm_tis tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc
[42057.100473] i915 i2c_algo_bit drm_kms_helper drm r8169 mii video
[42057.100478] CPU: 1 PID: 7475 Comm: Xorg.bin Tainted: G W 3.18.7-200.fc21.x86_64 #1
[42057.100479] Hardware name: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
[42057.100480] 0000000000000000 000000005ef871e4 ffff88026b34fa68 ffffffff8175e686
[42057.100482] 0000000000000000 ffff88026b34fac0 ffff88026b34faa8 ffffffff810991d1
[42057.100483] 0000000000000292 ffffffffffffffea ffff880405e14000 ffff8803f4e73400
[42057.100485] Call Trace:
[42057.100490] [<ffffffff8175e686>] dump_stack+0x46/0x58
[42057.100494] [<ffffffff810991d1>] warn_slowpath_common+0x81/0xa0
[42057.100496] [<ffffffff81099245>] warn_slowpath_fmt+0x55/0x70
[42057.100510] [<ffffffffa0109b3f>] ? intel_link_compute_m_n+0x4f/0x60 [i915]
[42057.100522] [<ffffffffa010b14b>] __intel_set_mode+0x15fb/0x16f0 [i915]
[42057.100533] [<ffffffffa0113746>] intel_set_mode+0x16/0x30 [i915]
[42057.100544] [<ffffffffa01148ea>] intel_crtc_set_config+0xa9a/0xea0 [i915]
[42057.100556] [<ffffffffa004f228>] ? drm_modeset_lock+0x78/0x110 [drm]
[42057.100564] [<ffffffffa003fe30>] drm_mode_set_config_internal+0x60/0xf0 [drm]
[42057.100572] [<ffffffffa00445e6>] drm_mode_setcrtc+0x2b6/0x5d0 [drm]
[42057.100578] [<ffffffffa0035aaf>] drm_ioctl+0x1df/0x680 [drm]
[42057.100582] [<ffffffff8122a1c0>] do_vfs_ioctl+0x2d0/0x4b0
[42057.100584] [<ffffffff81218001>] ? __sb_end_write+0x31/0x70
[42057.100586] [<ffffffff8122a421>] SyS_ioctl+0x81/0xa0
[42057.100589] [<ffffffff8113adf6>] ? __audit_syscall_exit+0x1f6/0x2a0
[42057.100591] [<ffffffff81765429>] system_call_fastpath+0x12/0x17
[42057.100592] ---[ end trace 6de3b8fde5346ad4 ]---
[42057.102710] ------------[ cut here ]------------
[42057.102740] WARNING: CPU: 1 PID: 7475 at drivers/gpu/drm/i915/intel_display.c:10450 __intel_set_mode+0x15fb/0x16f0 [i915]()
[42057.102741] loop in pipe configuration computation
[42057.102742] Modules linked in: nfsv3 rfcomm rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache fuse hidp xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc bnep hwmon_vid btrfs xor raid6_pq intel_rapl x86_pkg_temp_thermal coretemp kvm_intel kvm crct10dif_pclmul ppdev iTCO_wdt crc32_pclmul iTCO_vendor_support crc32c_intel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi usblp btusb snd_hda_intel snd_hda_controller bluetooth snd_hda_codec rfkill ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer i2c_i801 snd mei_me mei serio_raw soundcore shpchp lpc_ich mfd_core parport_pc parport tpm_infineon tpm_tis tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc
[42057.102763] i915 i2c_algo_bit drm_kms_helper drm r8169 mii video
[42057.102768] CPU: 1 PID: 7475 Comm: Xorg.bin Tainted: G W 3.18.7-200.fc21.x86_64 #1
[42057.102769] Hardware name: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
[42057.102770] 0000000000000000 000000005ef871e4 ffff88026b34fa68 ffffffff8175e686
[42057.102772] 0000000000000000 ffff88026b34fac0 ffff88026b34faa8 ffffffff810991d1
[42057.102774] 0000100000000000 ffffffffffffffea ffff880405e14000 ffff8803f4e73400
[42057.102775] Call Trace:
[42057.102780] [<ffffffff8175e686>] dump_stack+0x46/0x58
[42057.102784] [<ffffffff810991d1>] warn_slowpath_common+0x81/0xa0
[42057.102786] [<ffffffff81099245>] warn_slowpath_fmt+0x55/0x70
[42057.102799] [<ffffffffa0109b3f>] ? intel_link_compute_m_n+0x4f/0x60 [i915]
[42057.102810] [<ffffffffa010b14b>] __intel_set_mode+0x15fb/0x16f0 [i915]
[42057.102822] [<ffffffffa0113746>] intel_set_mode+0x16/0x30 [i915]
[42057.102833] [<ffffffffa01148ea>] intel_crtc_set_config+0xa9a/0xea0 [i915]
[42057.102844] [<ffffffffa004f228>] ? drm_modeset_lock+0x78/0x110 [drm]
[42057.102853] [<ffffffffa003fe30>] drm_mode_set_config_internal+0x60/0xf0 [drm]
[42057.102861] [<ffffffffa00445e6>] drm_mode_setcrtc+0x2b6/0x5d0 [drm]
[42057.102867] [<ffffffffa0035aaf>] drm_ioctl+0x1df/0x680 [drm]
[42057.102870] [<ffffffff8122a1c0>] do_vfs_ioctl+0x2d0/0x4b0
[42057.102872] [<ffffffff8122a421>] SyS_ioctl+0x81/0xa0
[42057.102875] [<ffffffff8113adf6>] ? __audit_syscall_exit+0x1f6/0x2a0
[42057.102878] [<ffffffff81765429>] system_call_fastpath+0x12/0x17
[42057.102879] ---[ end trace 6de3b8fde5346ad5 ]---
Any ideas/thoughts?
Cheers,
b.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-01 19:12 i915 driver doesn't find all Modelines that nouveau driver finds Brian J. Murrell
@ 2015-03-02 9:07 ` Chris Wilson
2015-03-02 11:16 ` Brian J. Murrell
2015-03-02 16:33 ` Brian J. Murrell
0 siblings, 2 replies; 15+ messages in thread
From: Chris Wilson @ 2015-03-02 9:07 UTC (permalink / raw)
To: Brian J. Murrell; +Cc: intel-gfx
On Sun, Mar 01, 2015 at 02:12:16PM -0500, Brian J. Murrell wrote:
> I have a dual-head set up here which I've recently changed the
> motherboard out and with it, removed an nVidia GT210 and replaced it
> with the on-board graphics that came on this:
>
> CPU: Intel(R) Celeron(R) CPU G1840 @ 2.80GHz (Family: 6, Model: 60, Stepping: 3)
>
> The monitors have remained the same through the changeout.
>
> What I am finding is that the nouveau driver on the nVidia GT210 found a
> 1600x1200@75Hz modeline for the ViewSonic PS790-2 monitor attached:
>
> [ 207.432] (II) NOUVEAU(1): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz UeP)
>
> but the intel driver doe not. Both drivers found all remaining
> Modelines.
Gut feeling is that this is related to HDMIv1.2 versus later. HDMIv1.4a
should be available on Haswell, but ark.intel.com gave no confirmation
for G1840.
For reference the loop in pipe is bug 85346:
https://bugs.freedesktop.org/show_bug.cgi?id=85346
Can you please attach dmesg with drm.debug=6 on the command line?
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-02 9:07 ` Chris Wilson
@ 2015-03-02 11:16 ` Brian J. Murrell
2015-03-02 16:33 ` Brian J. Murrell
1 sibling, 0 replies; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-02 11:16 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 586 bytes --]
On Mon, 2015-03-02 at 09:07 +0000, Chris Wilson wrote:
>
> Gut feeling is that this is related to HDMIv1.2 versus later.
I should have mentioned, the monitor that is not getting it's
1600x1200@75Hz timing picked up is on the D-Sub connector, not HDMI.
> For reference the loop in pipe is bug 85346:
> https://bugs.freedesktop.org/show_bug.cgi?id=85346
Is that related at all or was it just coincidence?
> Can you please attach dmesg with drm.debug=6 on the command line?
Sure, will followup with that since of course I will need to
reboot. :-)
Cheers,
b.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-02 9:07 ` Chris Wilson
2015-03-02 11:16 ` Brian J. Murrell
@ 2015-03-02 16:33 ` Brian J. Murrell
2015-03-02 18:07 ` Daniel Vetter
1 sibling, 1 reply; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-02 16:33 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1.1: Type: text/plain, Size: 1073 bytes --]
On Mon, 2015-03-02 at 09:07 +0000, Chris Wilson wrote:
> Can you please attach dmesg with drm.debug=6 on the command line?
Please find it attached. I did notice in it though:
[ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
[ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
[ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
Why would it think those modes are invalid?
Cheers,
b.
[-- Attachment #1.1.2: dmesg --]
[-- Type: text/plain, Size: 178349 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.7-300.fc21.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #1 SMP Wed Dec 17 03:08:44 UTC 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.17.7-300.fc21.x86_64 root=/dev/mapper/rootvol-fedora_root ro rd.md=0 rd.dm=0 rd.lvm.lv=rootvol/swap vconsole.keymap=us rd.lvm.lv=rootvol/fedora_root rd.lvm.lv=rootvol/fedora_usr rd.lvm.lv=rootvol/fedora_var rd.luks=0 vconsole.font=latarcyrheb-sun16 console=tty0 console=ttyS0,115200 nord.nodriver.noblacklist=nonouveau drm.debug=6
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c67f1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c67f2000-0x00000000c67f8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c67f9000-0x00000000c72a8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c72a9000-0x00000000c77e9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c77ea000-0x00000000d95e0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d95e1000-0x00000000d9678fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9679000-0x00000000d96bbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d96bc000-0x00000000d977dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d977e000-0x00000000daffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB800000 mask 7FFF800000 uncachable
[ 0.000000] 5 base 041F800000 mask 7FFF800000 uncachable
[ 0.000000] 6 base 041F600000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0202c000, 0x0202cfff] PGTABLE
[ 0.000000] BRK [0x0202d000, 0x0202dfff] PGTABLE
[ 0.000000] BRK [0x0202e000, 0x0202efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41f400000-0x41f5fffff]
[ 0.000000] [mem 0x41f400000-0x41f5fffff] page 2M
[ 0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41f3fffff]
[ 0.000000] [mem 0x41c000000-0x41f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc67f1fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc65fffff] page 2M
[ 0.000000] [mem 0xc6600000-0xc67f1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc67f9000-0xc72a8fff]
[ 0.000000] [mem 0xc67f9000-0xc67fffff] page 4k
[ 0.000000] [mem 0xc6800000-0xc71fffff] page 2M
[ 0.000000] [mem 0xc7200000-0xc72a8fff] page 4k
[ 0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc77ea000-0xd95e0fff]
[ 0.000000] [mem 0xc77ea000-0xc77fffff] page 4k
[ 0.000000] [mem 0xc7800000-0xd93fffff] page 2M
[ 0.000000] [mem 0xd9400000-0xd95e0fff] page 4k
[ 0.000000] BRK [0x02031000, 0x02031fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd9679000-0xd96bbfff]
[ 0.000000] [mem 0xd9679000-0xd96bbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x358b1000-0x36c50fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D974A078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D9756E08 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D974A178 00CC8D (v02 ALASKA A M I 00000088 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000D977C080 000040
[ 0.000000] ACPI: APIC 0x00000000D9756F18 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D9756F80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D9756FC8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D9757508 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000D9757FE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D9758020 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D9758058 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D97583C8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41f5fffff]
[ 0.000000] NODE_DATA [mem 0x41f5e7000-0x41f5fafff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040ec00000-ffff88041ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xc67f1fff]
[ 0.000000] node 0: [mem 0xc67f9000-0xc72a8fff]
[ 0.000000] node 0: [mem 0xc77ea000-0xd95e0fff]
[ 0.000000] node 0: [mem 0xd9679000-0xd96bbfff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x41f5fffff]
[ 0.000000] On node 0 totalpages: 4163193
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13828 pages used for memmap
[ 0.000000] DMA32 zone: 884957 pages, LIFO batch:31
[ 0.000000] Normal zone: 51160 pages used for memmap
[ 0.000000] Normal zone: 3274240 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc67f2000-0xc67f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc72a9000-0xc77e9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd95e1000-0xd9678fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd96bc000-0xd977dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd977e000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041f200000 s84352 r8192 d22144 u1048576
[ 0.000000] pcpu-alloc: s84352 r8192 d22144 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098120
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.7-300.fc21.x86_64 root=/dev/mapper/rootvol-fedora_root ro rd.md=0 rd.dm=0 rd.lvm.lv=rootvol/swap vconsole.keymap=us rd.lvm.lv=rootvol/fedora_root rd.lvm.lv=rootvol/fedora_usr rd.lvm.lv=rootvol/fedora_var rd.luks=0 vconsole.font=latarcyrheb-sun16 console=tty0 console=ttyS0,115200 nord.nodriver.noblacklist=nonouveau drm.debug=6
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] Memory: 16287232K/16652772K available (7473K kernel code, 1220K rwdata, 3256K rodata, 1468K init, 1540K bss, 365540K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:65792 nr_irqs:440 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2793.439 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.87 BogoMIPS (lpj=2793439)
[ 0.010773] pid_max: default: 32768 minimum: 301
[ 0.015460] ACPI: Core revision 20140724
[ 0.028228] ACPI: All ACPI Tables successfully acquired
[ 0.033879] Security Framework initialized
[ 0.038044] SELinux: Initializing.
[ 0.041600] SELinux: Starting in permissive mode
[ 0.042589] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.052709] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.061143] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.068100] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.075692] Initializing cgroup subsys memory
[ 0.080110] Initializing cgroup subsys devices
[ 0.084618] Initializing cgroup subsys freezer
[ 0.089121] Initializing cgroup subsys net_cls
[ 0.093624] Initializing cgroup subsys blkio
[ 0.097954] Initializing cgroup subsys perf_event
[ 0.102719] Initializing cgroup subsys net_prio
[ 0.107308] Initializing cgroup subsys hugetlb
[ 0.111832] CPU: Physical Processor ID: 0
[ 0.115897] CPU: Processor Core ID: 0
[ 0.120453] mce: CPU supports 7 MCE banks
[ 0.124531] CPU0: Thermal monitoring enabled (TM1)
[ 0.129391] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.142351] Freeing SMP alternatives memory: 28K (ffffffff81ea2000 - ffffffff81ea9000)
[ 0.151160] ftrace: allocating 27227 entries in 107 pages
[ 0.166726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.182650] smpboot: CPU0: Intel(R) Celeron(R) CPU G1840 @ 2.80GHz (fam: 06, model: 3c, stepping: 03)
[ 0.192092] TSC deadline timer enabled
[ 0.192111] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.203973] ... version: 3
[ 0.208051] ... bit width: 48
[ 0.212215] ... generic registers: 8
[ 0.216294] ... value mask: 0000ffffffffffff
[ 0.221675] ... max period: 0000ffffffffffff
[ 0.227056] ... fixed-purpose events: 3
[ 0.231131] ... event mask: 00000007000000ff
[ 0.237626] x86: Booting SMP configuration:
[ 0.241884] .... node #0, CPUs: #1
[ 0.259761] x86: Booted up 1 node, 2 CPUs
[ 0.264095] smpboot: Total of 2 processors activated (11173.75 BogoMIPS)
[ 0.270889] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.280187] devtmpfs: initialized
[ 0.286888] PM: Registering ACPI NVS region [mem 0xc67f2000-0xc67f8fff] (28672 bytes)
[ 0.294846] PM: Registering ACPI NVS region [mem 0xd96bc000-0xd977dfff] (794624 bytes)
[ 0.303556] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.310595] pinctrl core: initialized pinctrl subsystem
[ 0.315933] RTC time: 16:09:23, date: 03/02/15
[ 0.320519] NET: Registered protocol family 16
[ 0.325164] cpuidle: using governor menu
[ 0.329232] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.336928] ACPI: bus type PCI registered
[ 0.341009] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.347583] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.357020] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.363940] PCI: Using configuration type 1 for base access
[ 0.373883] ACPI: Added _OSI(Module Device)
[ 0.378142] ACPI: Added _OSI(Processor Device)
[ 0.382660] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.387433] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.395906] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.404674] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.413883] ACPI: Dynamic OEM Table Load:
[ 0.418032] ACPI: SSDT 0xFFFF88040E817000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.429694] ACPI: Dynamic OEM Table Load:
[ 0.433839] ACPI: SSDT 0xFFFF880408D36800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.445410] ACPI: Dynamic OEM Table Load:
[ 0.449554] ACPI: SSDT 0xFFFF880408836C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.461339] ACPI: Interpreter enabled
[ 0.465079] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.474496] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.483915] ACPI: (supports S0 S3 S4 S5)
[ 0.487912] ACPI: Using IOAPIC for interrupt routing
[ 0.492969] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.508481] ACPI: Power Resource [FN00] (off)
[ 0.512967] ACPI: Power Resource [FN01] (off)
[ 0.517449] ACPI: Power Resource [FN02] (off)
[ 0.521926] ACPI: Power Resource [FN03] (off)
[ 0.526404] ACPI: Power Resource [FN04] (off)
[ 0.531407] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.537665] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.546130] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.553573] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.560641] PCI host bridge to bus 0000:00
[ 0.564812] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.570374] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.576630] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.582886] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.589838] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.596789] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.603738] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.610690] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.617638] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.624590] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.631539] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.638495] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.638562] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
[ 0.638572] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.638578] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.638582] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.638644] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.638651] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[ 0.638732] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.638749] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.638802] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.638830] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.644592] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.644609] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[ 0.644666] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.644730] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.644748] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[ 0.644829] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.644868] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.650632] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.650646] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.650709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.650738] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.656494] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.656555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.656585] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.662342] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.662402] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.662432] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.668191] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.668252] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.668283] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.674047] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.674065] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[ 0.674146] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.674184] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.679952] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[ 0.680094] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.680107] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.680113] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.680119] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.680126] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.680132] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.680138] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[ 0.680170] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.680220] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.680233] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[ 0.680251] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.680356] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.685468] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.685486] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.685514] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.685531] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.685618] pci 0000:02:00.0: supports D1 D2
[ 0.685619] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.685648] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.693420] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.698456] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.698459] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.698463] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.698537] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[ 0.698665] pci 0000:03:00.0: supports D1 D2
[ 0.698666] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.698687] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.704440] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.709737] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.709740] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.709812] pci 0000:04:00.0: [1106:3249] type 00 class 0x010400
[ 0.709843] pci 0000:04:00.0: reg 0x10: [io 0xd150-0xd15f]
[ 0.709859] pci 0000:04:00.0: reg 0x14: [io 0xd140-0xd14f]
[ 0.709876] pci 0000:04:00.0: reg 0x18: [io 0xd130-0xd13f]
[ 0.709893] pci 0000:04:00.0: reg 0x1c: [io 0xd120-0xd12f]
[ 0.709909] pci 0000:04:00.0: reg 0x20: [io 0xd100-0xd11f]
[ 0.709926] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd0ff]
[ 0.709943] pci 0000:04:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref]
[ 0.710087] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.716956] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 0.716961] pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.716970] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
[ 0.716971] pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[ 0.716996] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.724930] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.732282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.740877] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.748219] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.755569] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.764168] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.772758] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.780107] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.787639] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.792656] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.798388] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.806609] vgaarb: loaded
[ 0.809387] vgaarb: bridge control possible 0000:00:02.0
[ 0.814831] SCSI subsystem initialized
[ 0.818689] libata version 3.00 loaded.
[ 0.818714] ACPI: bus type USB registered
[ 0.822811] usbcore: registered new interface driver usbfs
[ 0.828373] usbcore: registered new interface driver hub
[ 0.833773] usbcore: registered new device driver usb
[ 0.838958] PCI: Using ACPI for IRQ routing
[ 0.844470] PCI: pci_cache_line_size set to 64 bytes
[ 0.844512] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.844513] e820: reserve RAM buffer [mem 0xc67f2000-0xc7ffffff]
[ 0.844514] e820: reserve RAM buffer [mem 0xc72a9000-0xc7ffffff]
[ 0.844515] e820: reserve RAM buffer [mem 0xd95e1000-0xdbffffff]
[ 0.844516] e820: reserve RAM buffer [mem 0xd96bc000-0xdbffffff]
[ 0.844517] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.844518] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
[ 0.844605] NetLabel: Initializing
[ 0.848080] NetLabel: domain hash size = 128
[ 0.852504] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.857546] NetLabel: unlabeled traffic allowed by default
[ 0.863253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.869816] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.877741] Switched to clocksource hpet
[ 0.886756] pnp: PnP ACPI init
[ 0.889968] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.896662] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.896801] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.902795] system 00:01: [io 0xffff] has been reserved
[ 0.908182] system 00:01: [io 0xffff] has been reserved
[ 0.913569] system 00:01: [io 0xffff] has been reserved
[ 0.918958] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.924954] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.930951] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.936948] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.942942] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.949286] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.955283] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.955308] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.955343] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.961342] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.961434] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.967431] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.973427] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.979421] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.979451] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.979485] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.979649] pnp 00:07: [dma 0 disabled]
[ 0.979679] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.979880] pnp 00:08: [dma 0 disabled]
[ 0.979954] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.979989] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.985991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.986284] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.992979] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.999668] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.006355] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.013046] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.019737] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.026427] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.033117] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.039807] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 1.046495] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.053532] system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 1.060222] system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 1.066913] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.067074] pnp: PnP ACPI: found 11 devices
[ 1.077249] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.082294] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 1.087336] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 1.093512] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.100381] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.108253] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 1.113291] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
[ 1.119466] pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.126346] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 1.131649] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 1.137823] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.144692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.144693] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.144694] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.144695] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.144696] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.144698] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.144699] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.144700] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.144701] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.144702] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 1.144704] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 1.144705] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.144706] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.144708] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 1.144709] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 1.144710] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.144711] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 1.144712] pci_bus 0000:04: resource 4 [io 0xd000-0xdfff]
[ 1.144713] pci_bus 0000:04: resource 5 [mem 0xf7c00000-0xf7cfffff]
[ 1.144737] NET: Registered protocol family 2
[ 1.149352] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.157051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.163935] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.170643] TCP: reno registered
[ 1.173962] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.180171] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.186844] NET: Registered protocol family 1
[ 1.191289] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.223231] PCI: CLS 64 bytes, default 64
[ 1.223271] Unpacking initramfs...
[ 1.452717] Freeing initrd memory: 20096K (ffff8800358b1000 - ffff880036c51000)
[ 1.460172] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.466695] software IO TLB [mem 0xd55e1000-0xd95e1000] (64MB) mapped at [ffff8800d55e1000-ffff8800d95e0fff]
[ 1.478293] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 1.488971] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x12
[ 1.494886] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x12
[ 1.500831] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.510097] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.516282] Initialise system trusted keyring
[ 1.520730] audit: initializing netlink subsys (disabled)
[ 1.526214] audit: type=2000 audit(1425312563.006:1): initialized
[ 1.532659] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.540107] zpool: loaded
[ 1.542800] zbud: loaded
[ 1.545548] VFS: Disk quotas dquot_6.5.2
[ 1.549573] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.556337] msgmni has been set to 31850
[ 1.560379] Key type big_key registered
[ 1.564286] SELinux: Registering netfilter hooks
[ 1.564901] alg: No test for stdrng (krng)
[ 1.569083] NET: Registered protocol family 38
[ 1.573611] Key type asymmetric registered
[ 1.577780] Asymmetric key parser 'x509' registered
[ 1.582763] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.590310] io scheduler noop registered
[ 1.594311] io scheduler deadline registered
[ 1.598681] io scheduler cfq registered (default)
[ 1.603806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.609464] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.616190] intel_idle: MWAIT substates: 0x2120
[ 1.616191] intel_idle: v0.4 model 0x3C
[ 1.616192] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.616302] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.624784] ACPI: Power Button [PWRB]
[ 1.628546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.636067] ACPI: Power Button [PWRF]
[ 1.639844] ACPI: Fan [FAN0] (off)
[ 1.643333] ACPI: Fan [FAN1] (off)
[ 1.646829] ACPI: Fan [FAN2] (off)
[ 1.650327] ACPI: Fan [FAN3] (off)
[ 1.653822] ACPI: Fan [FAN4] (off)
[ 1.657573] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.663313] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.667791] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.673524] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.677889] GHES: HEST is not enabled!
[ 1.681779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.708677] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.716570] Non-volatile memory driver v1.3
[ 1.720834] Linux agpgart interface v0.103
[ 1.725101] ahci 0000:00:1f.2: version 3.0
[ 1.725173] ahci 0000:00:1f.2: irq 24 for MSI/MSI-X
[ 1.725205] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[ 1.733513] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[ 1.742154] scsi host0: ahci
[ 1.745228] scsi host1: ahci
[ 1.748251] scsi host2: ahci
[ 1.751282] scsi host3: ahci
[ 1.754302] scsi host4: ahci
[ 1.757294] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 24
[ 1.764818] ata2: DUMMY
[ 1.767333] ata3: DUMMY
[ 1.769849] ata4: DUMMY
[ 1.772368] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 24
[ 1.779975] libphy: Fixed MDIO Bus: probed
[ 1.784193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.790797] ehci-pci: EHCI PCI platform driver
[ 1.795390] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.800741] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.808271] ehci-pci 0000:00:1a.0: debug port 2
[ 1.816769] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.816779] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
[ 1.827886] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.833737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.840603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.847951] usb usb1: Product: EHCI Host Controller
[ 1.852903] usb usb1: Manufacturer: Linux 3.17.7-300.fc21.x86_64 ehci_hcd
[ 1.859771] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.864563] hub 1-0:1.0: USB hub found
[ 1.868395] hub 1-0:1.0: 2 ports detected
[ 1.872624] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.877979] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.885515] ehci-pci 0000:00:1d.0: debug port 2
[ 1.894009] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.894019] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[ 1.904977] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.910818] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.917680] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.925030] usb usb2: Product: EHCI Host Controller
[ 1.929982] usb usb2: Manufacturer: Linux 3.17.7-300.fc21.x86_64 ehci_hcd
[ 1.936847] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.941626] hub 2-0:1.0: USB hub found
[ 1.945455] hub 2-0:1.0: 2 ports detected
[ 1.949618] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.955880] ohci-pci: OHCI PCI platform driver
[ 1.960407] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.966908] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.972266] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.979862] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.979875] xhci_hcd 0000:00:14.0: irq 25 for MSI/MSI-X
[ 1.979916] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.986785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.994133] usb usb3: Product: xHCI Host Controller
[ 1.999084] usb usb3: Manufacturer: Linux 3.17.7-300.fc21.x86_64 xhci_hcd
[ 2.005953] usb usb3: SerialNumber: 0000:00:14.0
[ 2.010742] hub 3-0:1.0: USB hub found
[ 2.014580] hub 3-0:1.0: 10 ports detected
[ 2.020431] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.025872] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.033456] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.040323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.047670] usb usb4: Product: xHCI Host Controller
[ 2.052623] usb usb4: Manufacturer: Linux 3.17.7-300.fc21.x86_64 xhci_hcd
[ 2.059489] usb usb4: SerialNumber: 0000:00:14.0
[ 2.064273] hub 4-0:1.0: USB hub found
[ 2.068105] hub 4-0:1.0: 2 ports detected
[ 2.072510] usbcore: registered new interface driver usbserial
[ 2.078429] usbcore: registered new interface driver usbserial_generic
[ 2.084230] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.084250] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.085322] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 2.085324] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.085841] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.085842] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.085843] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.086656] ata1.00: configured for UDMA/133
[ 2.086713] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 2.086838] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.086886] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.086913] sd 0:0:0:0: [sda] Write Protect is off
[ 2.086914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.086925] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.087002] ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max UDMA/100
[ 2.088894] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.088895] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.088896] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.090073] ata5.00: configured for UDMA/100
[ 2.091526] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.00 PQ: 0 ANSI: 5
[ 2.104945] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.104945] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.105009] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.105046] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.108617] sda: sda1 sda2
[ 2.108751] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.177330] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.236176] usbserial: USB Serial support registered for generic
[ 2.242298] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.251010] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.256051] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.261255] mousedev: PS/2 mouse device common for all mice
[ 2.267395] rtc_cmos 00:02: RTC can wake from S4
[ 2.272296] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.278505] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.286368] device-mapper: uevent: version 1.0.3
[ 2.291172] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.299787] Intel P-state driver initializing.
[ 2.304549] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 2.305295] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.305601] usbcore: registered new interface driver usbhid
[ 2.305602] usbhid: USB HID core driver
[ 2.305672] drop_monitor: Initializing network drop monitor service
[ 2.305839] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.311413] TCP: cubic registered
[ 2.311425] Initializing XFRM netlink socket
[ 2.311696] NET: Registered protocol family 10
[ 2.312118] mip6: Mobile IPv6
[ 2.312125] NET: Registered protocol family 17
[ 2.312794] Loading compiled-in X.509 certificates
[ 2.314999] Loaded X.509 cert 'Fedora kernel signing key: a3deaae72f85c63029d7879041c633438a40e688'
[ 2.315030] registered taskstats version 1
[ 2.315915] Magic number: 7:443:185
[ 2.315966] thermal LNXTHERM:01: hash matches
[ 2.315982] acpi device:44: hash matches
[ 2.316930] rtc_cmos 00:02: setting system clock to 2015-03-02 16:09:25 UTC (1425312565)
[ 2.317108] PM: Hibernation image not present or could not be loaded.
[ 2.398918] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.399188] hub 1-1:1.0: USB hub found
[ 2.399272] hub 1-1:1.0: 4 ports detected
[ 2.415360] Freeing unused kernel memory: 1468K (ffffffff81d33000 - ffffffff81ea2000)
[ 2.423752] Write protecting the kernel read-only data: 12288k
[ 2.431188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.441459] Freeing unused kernel memory: 708K (ffff88000174f000 - ffff880001800000)
[ 2.451354] Freeing unused kernel memory: 840K (ffff880001b2e000 - ffff880001c00000)
[ 2.465113] random: systemd urandom read with 14 bits of entropy available
[ 2.472715] systemd[1]: systemd 217 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN )
[ 2.479690] tsc: Refined TSC clocksource calibration: 2793.530 MHz
[ 2.497421] systemd[1]: Detected architecture 'x86-64'.
[ 2.502780] systemd[1]: Running in initial RAM disk.
[ 2.516819] systemd[1]: Set hostname to <pc.interlinx.bc.ca>.
[ 2.549691] systemd[1]: Expecting device dev-mapper-rootvol\x2dswap.device...
[ 2.556940] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2.569841] systemd[1]: Expecting device dev-mapper-rootvol\x2dfedora_usr.device...
[ 2.584852] systemd[1]: Expecting device dev-mapper-rootvol\x2dfedora_root.device...
[ 2.599873] systemd[1]: Starting Timers.
[ 2.607882] systemd[1]: Reached target Timers.
[ 2.612424] systemd[1]: Starting -.slice.
[ 2.623874] systemd[1]: Created slice -.slice.
[ 2.628425] systemd[1]: Starting udev Control Socket.
[ 2.638925] systemd[1]: Listening on udev Control Socket.
[ 2.644424] systemd[1]: Starting udev Kernel Socket.
[ 2.654942] systemd[1]: Listening on udev Kernel Socket.
[ 2.660350] systemd[1]: Starting Journal Socket.
[ 2.669960] systemd[1]: Listening on Journal Socket.
[ 2.675028] systemd[1]: Starting System Slice.
[ 2.683980] systemd[1]: Created slice System Slice.
[ 2.688980] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 2.696201] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.708017] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.714445] systemd[1]: Starting dracut cmdline hook...
[ 2.724360] systemd[1]: Started Load Kernel Modules.
[ 2.729432] systemd[1]: Starting Apply Kernel Variables...
[ 2.739644] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.745626] systemd[1]: Starting Slices.
[ 2.754062] systemd[1]: Reached target Slices.
[ 2.758635] systemd[1]: Starting Setup Virtual Console...
[ 2.770572] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.790404] systemd[1]: Starting Swap.
[ 2.799093] systemd[1]: Reached target Swap.
[ 2.806084] systemd[1]: Starting Local File Systems.
[ 2.821120] systemd[1]: Reached target Local File Systems.
[ 2.835140] systemd[1]: Started Apply Kernel Variables.
[ 2.850160] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.861204] systemd[1]: Started dracut cmdline hook.
[ 2.872202] systemd[1]: Started Setup Virtual Console.
[ 2.886210] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.899583] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.906224] usb 3-2: New USB device found, idVendor=046d, idProduct=08c5
[ 2.913084] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.926672] systemd[1]: Starting dracut pre-udev hook...
[ 2.936572] systemd[1]: Starting Sockets.
[ 2.945287] systemd[1]: Reached target Sockets.
[ 2.949942] systemd[1]: Starting Journal Service...
[ 2.963714] systemd-journald[253]: File /var/log/journal/b973333923f0c005e38d0e0563ae700a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 2.982330] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.993907] systemd[1]: Started dracut pre-udev hook.
[ 3.004369] systemd[1]: Started Journal Service.
[ 3.030361] usb 3-3: new full-speed USB device number 3 using xhci_hcd
[ 3.092083] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.103283] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.111179] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[ 3.111347] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90005b86000, fc:aa:14:6c:51:ab, XID 0c900800 IRQ 26
[ 3.122098] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.129138] r8169 0000:02:00.0 p4p1: renamed from eth0
[ 3.204471] usb 3-3: New USB device found, idVendor=0a5c, idProduct=2121
[ 3.211281] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.211320] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input4
[ 3.226826] usb 3-3: Product: BCM92045B3 ROM
[ 3.231174] usb 3-3: Manufacturer: Broadcom Corp
[ 3.388811] usb 3-4: new full-speed USB device number 4 using xhci_hcd
[ 3.481057] Switched to clocksource tsc
[ 3.561179] usb 3-4: New USB device found, idVendor=04f9, idProduct=01e9
[ 3.567960] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 3.575171] usb 3-4: SerialNumber: 000H8N427165
[ 3.733233] usb 3-5: new low-speed USB device number 5 using xhci_hcd
[ 3.909826] usb 3-5: New USB device found, idVendor=047d, idProduct=1024
[ 3.916645] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.923877] usb 3-5: Product: Kensington USB Mouse
[ 3.928758] usb 3-5: Manufacturer: Kensington
[ 3.933306] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.944816] input: Kensington Kensington USB Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:047D:1024.0001/input/input5
[ 3.957366] hid-generic 0003:047D:1024.0001: input,hidraw0: USB HID v1.00 Mouse [Kensington Kensington USB Mouse] on usb-0000:00:14.0-5/input0
[ 4.067956] random: nonblocking pool is initialized
[ 4.071588] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.194026] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 4.200860] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.208685] hub 2-1:1.0: USB hub found
[ 4.212912] hub 2-1:1.0: 6 ports detected
[ 39.414405] PM: Starting manual resume from disk
[ 39.420065] PM: Hibernation image partition 253:0 present
[ 39.420066] PM: Looking for hibernation image.
[ 39.444024] PM: Image not found (code -22)
[ 39.444026] PM: Hibernation image not present or could not be loaded.
[ 39.563648] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 39.824228] EXT4-fs (dm-7): mounting with "discard" option, but the device does not support discard
[ 39.833465] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
[ 40.059767] systemd-journald[253]: Received SIGTERM from PID 1 (systemd).
[ 40.813521] audit: type=1404 audit(1425312603.950:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 40.968581] SELinux: 2048 avtab hash slots, 104708 rules.
[ 40.981972] SELinux: 2048 avtab hash slots, 104708 rules.
[ 41.009288] SELinux: 8 users, 103 roles, 4987 types, 295 bools, 1 sens, 1024 cats
[ 41.009291] SELinux: 83 classes, 104708 rules
[ 41.012645] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 41.020839] SELinux: the above unknown classes and permissions will be allowed
[ 41.028244] SELinux: Completing initialization.
[ 41.028245] SELinux: Setting up existing superblocks.
[ 41.028252] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 41.028258] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 41.028263] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 41.028301] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 41.028312] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 41.028748] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 41.029324] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 41.029326] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 41.029329] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 41.029330] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 41.029332] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 41.029345] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 41.029349] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 41.029356] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 41.029363] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 41.029646] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 41.029648] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 41.029655] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 41.029724] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 41.029750] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029753] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 41.029754] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029756] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029757] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029762] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029765] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029766] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029768] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029772] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029773] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 41.029775] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 41.063708] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 41.111668] SELinux: initialized (dev dm-7, type ext4), uses xattr
[ 41.115026] audit: type=1403 audit(1425312604.251:3): policy loaded auid=4294967295 ses=4294967295
[ 41.167274] systemd[1]: Successfully loaded SELinux policy in 403.760ms.
[ 41.303146] systemd[1]: Relabelled /dev and /run in 16.551ms.
[ 41.658705] systemd-sysv-generator[584]: Could not find init script for ebtables.service
[ 41.666983] ttyS0: 7 input overrun(s)
[ 41.670802] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
[ 41.679305] systemd-sysv-generator[584]: Could not find init script for ebtables.service
[ 41.687718] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
[ 41.696065] systemd-sysv-generator[584]: Could not find init script for ebtables.service
[ 41.704467] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
[ 41.712911] systemd-sysv-generator[584]: Could not find init script for ebtables.service
[ 41.721244] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
[ 41.733086] systemd-sysv-generator[584]: Could not find init script for ebtables.service
[ 41.741371] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
[ 41.750368] systemd-sysv-generator[584]: Could not find init script for ebtables.service
[ 41.758790] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
[ 41.767134] systemd-sysv-generator[584]: Could not find init script for ebtables.service
[ 41.775461] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
[ 44.219933] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 45.458222] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 45.466418] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 45.877219] EXT4-fs (dm-7): re-mounted. Opts: discard,errors=remount-ro
[ 45.884206] EXT4-fs (dm-2): re-mounted. Opts: discard,errors=remount-ro
[ 47.784048] RPC: Registered named UNIX socket transport module.
[ 47.790109] RPC: Registered udp transport module.
[ 47.794956] RPC: Registered tcp transport module.
[ 47.799788] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 47.908493] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 47.915399] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
[ 49.409784] parport_pc 00:08: reported by Plug and Play ACPI
[ 49.419758] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 49.527948] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
[ 49.598274] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 49.683964] [drm] Initialized drm 1.1.0 20060810
[ 49.790622] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 49.798422] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 49.815627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 49.854558] sata_via 0000:04:00.0: version 2.6
[ 49.854664] sata_via 0000:04:00.0: routed to hard irq line 10
[ 49.871945] scsi host5: sata_via
[ 49.887083] scsi host6: sata_via
[ 49.895319] scsi host7: sata_via
[ 49.898727] ata6: SATA max UDMA/133 port i16@0xd150 bmdma 0xd100 irq 19
[ 49.905488] ata7: SATA max UDMA/133 port i16@0xd140 bmdma 0xd108 irq 19
[ 49.912243] ata8: PATA max UDMA/133 port i16@0xd130 bmdma 0xd110 irq 19
[ 50.235964] ata6: SATA link down (SStatus 0 SControl 310)
[ 50.350148] alg: No test for crc32 (crc32-pclmul)
[ 50.378436] SELinux: initialized (dev drm, type drm), not configured for labeling
[ 50.382570] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0402 rev=0x06 flags=need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[ 50.382590] [drm:intel_detect_pch] Found LynxPoint PCH
[ 50.382621] [drm] Memory usable by graphics device = 2048M
[ 50.388245] [drm:i915_gem_gtt_init] GMADR size = 256M
[ 50.388246] [drm:i915_gem_gtt_init] GTT stolen size = 64M
[ 50.388247] [drm:i915_gem_gtt_init] ppgtt mode: 1
[ 50.388435] [drm] Replacing VGA console driver
[ 50.395133] Console: switching to colour dummy device 80x25
[ 50.416540] [drm:intel_opregion_setup] graphic opregion physical addr: 0xd9760018
[ 50.416553] [drm:intel_opregion_setup] Public ACPI methods supported
[ 50.416554] [drm:intel_opregion_setup] SWSCI supported
[ 50.421990] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
[ 50.421993] [drm:intel_opregion_setup] ASLE supported
[ 50.422065] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 50.422072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 50.428753] [drm] Driver supports precise vblank timestamp query.
[ 50.434920] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
[ 50.434921] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d
[ 50.434923] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 50.434924] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[ 50.434926] [drm:parse_lfp_panel_data] DRRS supported mode is static
[ 50.436381] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[ 50.436385] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 50.436386] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
[ 50.436389] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
[ 50.436390] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[ 50.436392] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 50.436393] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[ 50.436394] [drm:parse_driver_features] DRRS State Enabled:1
[ 50.436396] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[ 50.436397] [drm:parse_ddi_port] VBT HDMI level shift for port B: 6
[ 50.436406] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[ 50.436412] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at dba00000
[ 50.436414] [drm:intel_display_power_get] enabling always-on
[ 50.436415] [drm:intel_display_power_get] enabling display
[ 50.436418] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 50.455967] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
[ 50.455970] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
[ 50.455971] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
[ 50.455972] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
[ 50.455973] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
[ 50.455974] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
[ 50.455975] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
[ 50.455976] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
[ 50.455977] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
[ 50.455978] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
[ 50.455979] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
[ 50.455980] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
[ 50.455981] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
[ 50.455981] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
[ 50.455982] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
[ 50.455985] [drm:intel_modeset_init] 3 display pipes available.
[ 50.455995] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
[ 50.467441] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
[ 50.467669] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled
[ 50.467671] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
[ 50.467673] [drm:intel_modeset_readout_hw_state] [CRTC:15] hw state readout: disabled
[ 50.467675] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
[ 50.467676] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
[ 50.467679] [drm:intel_modeset_readout_hw_state] [ENCODER:18:DAC-18] hw state readout: enabled, pipe A
[ 50.467681] [drm:intel_modeset_readout_hw_state] [ENCODER:19:TMDS-19] hw state readout: disabled, pipe A
[ 50.467682] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:VGA-1] hw state readout: enabled
[ 50.467684] [drm:intel_modeset_readout_hw_state] [CONNECTOR:20:HDMI-A-1] hw state readout: disabled
[ 50.467686] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A
[ 50.467687] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 50.467688] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 50.467690] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
[ 50.467691] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.467692] [drm:intel_dump_pipe_config] requested mode:
[ 50.467694] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
[ 50.467695] [drm:intel_dump_pipe_config] adjusted mode:
[ 50.467696] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
[ 50.467698] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
[ 50.467699] [drm:intel_dump_pipe_config] port clock: 270000
[ 50.467700] [drm:intel_dump_pipe_config] pipe src size: 720x400
[ 50.467701] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 50.467702] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
[ 50.467703] [drm:intel_dump_pipe_config] ips: 0
[ 50.467704] [drm:intel_dump_pipe_config] double wide: 0
[ 50.467706] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[ 50.467707] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
[ 50.467708] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[ 50.467710] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe B
[ 50.467711] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 50.467711] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 50.467713] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.467714] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.467715] [drm:intel_dump_pipe_config] requested mode:
[ 50.467716] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 50.467717] [drm:intel_dump_pipe_config] adjusted mode:
[ 50.467719] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 50.467720] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 50.467721] [drm:intel_dump_pipe_config] port clock: 0
[ 50.467722] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 50.467723] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 50.467724] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.467725] [drm:intel_dump_pipe_config] ips: 0
[ 50.467726] [drm:intel_dump_pipe_config] double wide: 0
[ 50.467727] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
[ 50.467728] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
[ 50.467729] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
[ 50.467731] [drm:intel_dump_pipe_config] [CRTC:15][setup_hw_state] config for pipe C
[ 50.467731] [drm:intel_dump_pipe_config] cpu_transcoder: C
[ 50.467732] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 50.467734] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.467735] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.467736] [drm:intel_dump_pipe_config] requested mode:
[ 50.467737] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 50.467738] [drm:intel_dump_pipe_config] adjusted mode:
[ 50.467740] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 50.467741] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 50.467742] [drm:intel_dump_pipe_config] port clock: 0
[ 50.467743] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 50.467744] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 50.467745] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.467746] [drm:intel_dump_pipe_config] ips: 0
[ 50.467747] [drm:intel_dump_pipe_config] double wide: 0
[ 50.467751] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 50.467753] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 50.467754] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 50.467755] [drm:check_crtc_state] [CRTC:7]
[ 50.467762] [drm:check_crtc_state] [CRTC:11]
[ 50.467764] [drm:check_crtc_state] [CRTC:15]
[ 50.467765] [drm:check_shared_dpll_state] WRPLL 1
[ 50.467766] [drm:check_shared_dpll_state] WRPLL 2
[ 50.467770] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 5120, size 0x1f4000
[ 50.467771] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1f4000
[ 50.467775] [drm:i915_pages_create_for_stolen] offset=0x0, size=2048000
[ 50.467778] [drm:intel_alloc_plane_obj] plane fb obj ffff880406a80000
[ 50.467780] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 1f4000
[ 50.467781] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [1f4000, 7ffff000]
[ 50.475381] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
[ 50.475386] [drm:i915_gem_context_init] HW context support initialized
[ 50.475411] [drm:init_status_page] render ring hws offset: 0x7fff0000
[ 50.477053] [drm:init_pipe_control] render ring pipe control offset: 0x00225000
[ 50.477061] [drm:init_status_page] bsd ring hws offset: 0x00226000
[ 50.477114] [drm:init_status_page] blitter ring hws offset: 0x00247000
[ 50.477161] [drm:init_status_page] video enhancement ring hws offset: 0x00268000
[ 50.477371] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1]
[ 50.477372] [drm:intel_crt_detect] [CONNECTOR:17:VGA-1] force=1
[ 50.477375] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010
[ 50.493876] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
[ 50.493879] [drm:intel_crt_detect] CRT detected via hotplug
[ 50.508350] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
[ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
[ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 50.508395] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1] probed modes :
[ 50.508397] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 50.508398] [drm:drm_mode_debug_printmodeline] Modeline 70:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 50.508400] [drm:drm_mode_debug_printmodeline] Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6
[ 50.508401] [drm:drm_mode_debug_printmodeline] Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[ 50.508403] [drm:drm_mode_debug_printmodeline] Modeline 74:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
[ 50.508405] [drm:drm_mode_debug_printmodeline] Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 50.508406] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 50.508408] [drm:drm_mode_debug_printmodeline] Modeline 69:"1440x900" 85 157000 1440 1544 1696 1952 900 903 909 948 0x40 0x6
[ 50.508409] [drm:drm_mode_debug_printmodeline] Modeline 68:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 50.508410] [drm:drm_mode_debug_printmodeline] Modeline 67:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[ 50.508412] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x960" 85 148500 1280 1344 1504 1728 960 961 964 1011 0x40 0x5
[ 50.508413] [drm:drm_mode_debug_printmodeline] Modeline 61:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 50.508415] [drm:drm_mode_debug_printmodeline] Modeline 73:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
[ 50.508447] [drm:drm_mode_debug_printmodeline] Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[ 50.508448] [drm:drm_mode_debug_printmodeline] Modeline 60:"1280x800" 85 122500 1280 1360 1496 1712 800 803 809 843 0x40 0x6
[ 50.508450] [drm:drm_mode_debug_printmodeline] Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[ 50.508451] [drm:drm_mode_debug_printmodeline] Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[ 50.508453] [drm:drm_mode_debug_printmodeline] Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 50.508454] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x768" 85 117500 1280 1360 1496 1712 768 771 778 809 0x40 0x6
[ 50.508456] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[ 50.508457] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[ 50.508459] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768i" 86 44900 1024 1032 1208 1264 768 768 776 817 0x40 0x15
[ 50.508460] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 50.508462] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 50.508463] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 50.508465] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 50.508466] [drm:drm_mode_debug_printmodeline] Modeline 72:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
[ 50.508468] [drm:drm_mode_debug_printmodeline] Modeline 45:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 50.508469] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 50.508471] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 50.508472] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 50.508473] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 50.508475] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 50.508488] [drm:drm_mode_debug_printmodeline] Modeline 54:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 50.508489] [drm:drm_mode_debug_printmodeline] Modeline 52:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 50.508491] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 50.508492] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 50.508494] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 50.508495] [drm:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 50.508496] [drm:drm_mode_debug_printmodeline] Modeline 38:"720x400" 88 35500 720 738 846 900 400 421 423 449 0x40 0xa
[ 50.508498] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x400" 85 35500 720 756 828 936 400 401 404 446 0x40 0x6
[ 50.508499] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 50.508501] [drm:drm_mode_debug_printmodeline] Modeline 50:"640x400" 85 31500 640 672 736 832 400 401 404 445 0x40 0x6
[ 50.508502] [drm:drm_mode_debug_printmodeline] Modeline 49:"640x350" 85 31500 640 672 736 832 350 382 385 445 0x40 0x9
[ 50.508504] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
[ 50.508506] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
[ 50.543767] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 50.543778] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
[ 50.543781] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 50.543783] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
[ 50.543784] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 50.543786] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 50.543787] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
[ 50.543789] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 50.543790] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 50.543792] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 50.543793] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 50.543795] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 50.543796] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 50.543798] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 50.543799] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 50.543801] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 50.543802] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 50.543804] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 50.543805] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 50.543807] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 50.543808] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 50.543809] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 50.543811] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 50.543812] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 50.543814] [drm:drm_setup_crtcs]
[ 50.543815] [drm:drm_enable_connectors] connector 17 enabled? yes
[ 50.543816] [drm:drm_enable_connectors] connector 20 enabled? yes
[ 50.543818] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1
[ 50.543849] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1
[ 50.543851] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:7]: 1280x1024
[ 50.543852] [drm:intel_fb_initial_config] connector HDMI-A-1 has no encoder or crtc, skipping
[ 50.543852] [drm:intel_fb_initial_config] fallback: Not all outputs enabled
[ 50.543853] [drm:intel_fb_initial_config] Enabled: 1, detected: 2
[ 50.543854] [drm:intel_fb_initial_config] Not using firmware configuration
[ 50.543855] [drm:drm_target_preferred] looking for cmdline mode on connector 17
[ 50.543856] [drm:drm_target_preferred] looking for preferred mode on connector 17
[ 50.543857] [drm:drm_target_preferred] found mode 1280x1024
[ 50.543858] [drm:drm_target_preferred] looking for cmdline mode on connector 20
[ 50.543859] [drm:drm_target_preferred] looking for preferred mode on connector 20
[ 50.543859] [drm:drm_target_preferred] found mode 1600x1200
[ 50.543860] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[ 50.543865] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 7
[ 50.543866] [drm:drm_setup_crtcs] desired mode 1600x1200 set on crtc 11
[ 50.543867] [drm:intelfb_create] no BIOS fb, allocating a new one
[ 50.543869] [drm:i915_gem_object_create_stolen] creating stolen object: size=753000
[ 50.543871] [drm:i915_pages_create_for_stolen] offset=0x1f4000, size=7680000
[ 50.544410] [drm:intelfb_create] allocated 1600x1200 fb: 0x0028a000, bo ffff880406a81500
[ 50.545280] fbcon: inteldrmfb (fb0) is primary device
[ 50.545307] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 50.545308] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[ 50.545310] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 50.545311] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 50.545312] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
[ 50.545313] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 50.545314] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 50.545315] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
[ 50.545316] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[ 50.545317] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 50.545318] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
[ 50.545318] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 50.545319] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 50.545320] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 7340032, gmch_n: 8388608, link_m: 305834, link_n: 524288, tu: 64
[ 50.545321] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.545321] [drm:intel_dump_pipe_config] requested mode:
[ 50.545322] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 50.545322] [drm:intel_dump_pipe_config] adjusted mode:
[ 50.545324] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 50.545325] [drm:intel_dump_crtc_timings] crtc timings: 157500 1280 1344 1504 1728 1024 1025 1028 1072, type: 0x48 flags: 0x5
[ 50.545325] [drm:intel_dump_pipe_config] port clock: 270000
[ 50.545326] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[ 50.545326] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 50.545327] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.545327] [drm:intel_dump_pipe_config] ips: 0
[ 50.545327] [drm:intel_dump_pipe_config] double wide: 0
[ 50.560348] ata7: SATA link down (SStatus 0 SControl 310)
[ 50.564151] [drm:hsw_crt_post_disable] Disabling SPLL
[ 50.564154] [drm:intel_update_fbc] no output, disabling
[ 50.564171] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
[ 50.565707] [drm:hsw_fdi_link_train] FDI link training done on step 1
[ 50.565787] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 157500KHz refresh rate: auxdiv=0, divsel=f, phasedir=0, phaseinc=9
[ 50.565844] [drm:intel_update_fbc] disabled per chip default
[ 50.565846] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 50.565847] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 50.565848] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 50.565849] [drm:check_crtc_state] [CRTC:7]
[ 50.565856] [drm:check_crtc_state] [CRTC:11]
[ 50.565857] [drm:check_crtc_state] [CRTC:15]
[ 50.565858] [drm:check_shared_dpll_state] WRPLL 1
[ 50.565890] [drm:check_shared_dpll_state] WRPLL 2
[ 50.565892] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 50.565893] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 50.565894] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[ 50.565895] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 50.565897] [drm:drm_mode_debug_printmodeline] Modeline 94:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 50.565897] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
[ 50.565898] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 50.565898] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 50.565899] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 50.565900] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 50.565900] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 50.565901] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 50.565902] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
[ 50.565903] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[ 50.565903] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[ 50.565904] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 50.565905] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B
[ 50.565905] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 50.565905] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 50.565906] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.565907] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 50.565907] [drm:intel_dump_pipe_config] requested mode:
[ 50.565908] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 50.565909] [drm:intel_dump_pipe_config] adjusted mode:
[ 50.565910] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 50.565911] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x48 flags: 0x5
[ 50.565911] [drm:intel_dump_pipe_config] port clock: 162000
[ 50.565912] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
[ 50.565912] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 50.565913] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 50.565913] [drm:intel_dump_pipe_config] ips: 0
[ 50.565914] [drm:intel_dump_pipe_config] double wide: 0
[ 50.566722] [drm:intel_get_shared_dpll] CRTC:11 allocated WRPLL 1
[ 50.566723] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe B
[ 50.566724] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 11
[ 50.566726] [drm:intel_enable_shared_dpll] enabling WRPLL 1
[ 50.566754] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
[ 50.590195] [drm:intel_update_fbc] more than one pipe active, disabling compression
[ 50.590200] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 50.590202] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 50.590203] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 50.590204] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 50.590205] [drm:check_crtc_state] [CRTC:7]
[ 50.590212] [drm:check_crtc_state] [CRTC:11]
[ 50.590217] [drm:check_crtc_state] [CRTC:15]
[ 50.590218] [drm:check_shared_dpll_state] WRPLL 1
[ 50.590218] [drm:check_shared_dpll_state] WRPLL 2
[ 50.590221] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
[ 50.590222] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
[ 50.590223] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 50.590224] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 50.590229] Console: switching to colour frame buffer device 160x64
[ 50.590236] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 50.590237] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 50.590238] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 50.590238] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 50.590239] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 50.590240] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 50.590240] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 50.590241] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 50.609664] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 50.615925] i915 0000:00:02.0: registered panic notifier
[ 50.632230] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 50.639417] [drm:asle_set_backlight] bclp = 0x80000002
[ 50.639419] [drm:asle_set_backlight] updating opregion backlight 2/255
[ 50.639488] [drm:asle_set_backlight] bclp = 0x800000ff
[ 50.639489] [drm:asle_set_backlight] updating opregion backlight 255/255
[ 50.641651] acpi device:60: registered as cooling_device7
[ 50.648377] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 50.659832] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 50.667243] snd_hda_intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[ 50.681300] usblp 3-4:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E9
[ 50.699364] usbcore: registered new interface driver usblp
[ 50.718263] ata8.00: ATA-6: SAMSUNG SV1204H, RK100-09, max UDMA/100
[ 50.724618] ata8.00: 234493056 sectors, multi 0: LBA
[ 50.729754] ata8.01: ATAPI: SONY CD-RW CRX215E5, 5.0D, max UDMA/33
[ 50.741135] ata8.00: configured for UDMA/100
[ 50.752029] ata8.01: configured for UDMA/33
[ 50.759794] scsi 7:0:0:0: Direct-Access ATA SAMSUNG SV1204H 0-09 PQ: 0 ANSI: 5
[ 50.770172] sd 7:0:0:0: [sdb] 234493056 512-byte logical blocks: (120 GB/111 GiB)
[ 50.778533] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 50.785799] sd 7:0:0:0: [sdb] Write Protect is off
[ 50.790661] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 50.798522] scsi 7:0:1:0: CD-ROM SONY CD-RW CRX215E5 5.0D PQ: 0 ANSI: 5
[ 50.806699] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 50.835322] sr 7:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 50.846215] sr 7:0:1:0: Attached scsi CD-ROM sr1
[ 50.846283] sr 7:0:1:0: Attached scsi generic sg3 type 5
[ 50.869278] sdb: sdb1 sdb2 sdb3
[ 50.873281] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 50.894810] snd_hda_intel 0000:00:03.0: irq 30 for MSI/MSI-X
[ 50.941925] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 50.956692] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 50.966728] sound hdaudioC1D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 50.974818] sound hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 50.981433] sound hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 50.987686] sound hdaudioC1D2: mono: mono_out=0x0
[ 50.992729] sound hdaudioC1D2: inputs:
[ 50.999664] sound hdaudioC1D2: Rear Mic=0x18
[ 51.009676] sound hdaudioC1D2: Front Mic=0x19
[ 51.015776] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 51.028698] sound hdaudioC1D2: Line=0x1a
[ 51.037715] sound hdaudioC1D2: CD=0x1c
[ 51.080032] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 51.095709] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 51.112505] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 51.126044] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 51.135816] Bluetooth: Core ver 2.19
[ 51.143860] NET: Registered protocol family 31
[ 51.149177] Bluetooth: HCI device and connection manager initialized
[ 51.170273] Bluetooth: HCI socket layer initialized
[ 51.196826] Bluetooth: L2CAP socket layer initialized
[ 51.215218] Bluetooth: SCO socket layer initialized
[ 51.258947] usbcore: registered new interface driver btusb
[ 51.320179] usb 3-2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
[ 51.329594] usb 3-2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
[ 51.355695] usbcore: registered new interface driver snd-usb-audio
[ 51.468659] ppdev: user-space parallel port driver
[ 51.664409] iTCO_vendor_support: vendor-support=0
[ 51.815148] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 51.821926] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 52.287263] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 52.287271] [drm:gen6_enable_rps] Overclocking supported. Max: 1050MHz, Overclock max: 1050MHz
[ 52.309177] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 52.309178] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 52.309180] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 52.309181] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 52.309182] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 52.309183] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 52.309184] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 52.309184] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 52.928028] media: Linux media interface: v0.10
[ 53.022828] Linux video capture interface: v2.00
[ 53.275161] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c5)
[ 53.304020] input: UVC Camera (046d:08c5) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input14
[ 53.316780] usbcore: registered new interface driver uvcvideo
[ 53.323433] USB Video Class driver (1.1.1)
[ 54.447378] Adding 4194300k swap on /dev/mapper/rootvol-swap. Priority:-1 extents:1 across:4194300k FS
[ 55.350720] EXT4-fs (dm-9): mounting with "discard" option, but the device does not support discard
[ 55.360679] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
[ 55.370991] SELinux: initialized (dev dm-9, type ext4), uses xattr
[ 55.856393] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 56.657717] systemd-journald[599]: Received request to flush runtime journal from PID 1
[ 56.818629] [drm:asle_set_backlight] bclp = 0x800000ff
[ 56.818633] [drm:asle_set_backlight] updating opregion backlight 255/255
[ 59.026796] EXT4-fs (dm-15): warning: maximal mount count reached, running e2fsck is recommended
[ 59.302641] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro
[ 59.313236] SELinux: initialized (dev dm-15, type ext4), uses xattr
[ 61.486200] raid6: sse2x1 8523 MB/s
[ 61.507223] raid6: sse2x2 11000 MB/s
[ 61.528246] raid6: sse2x4 12609 MB/s
[ 61.532849] raid6: using algorithm sse2x4 (12609 MB/s)
[ 61.538838] raid6: using ssse3x2 recovery algorithm
[ 61.829469] xor: measuring software checksum speed
[ 61.844623] prefetch64-sse: 18328.000 MB/sec
[ 61.859641] generic_sse: 16524.000 MB/sec
[ 61.864762] xor: using function: prefetch64-sse (18328.000 MB/sec)
[ 62.065346] Btrfs loaded
[ 62.356376] BTRFS: device fsid ff633c5b-7a7a-4ca0-b5ba-170424f09aa6 devid 1 transid 287682 /dev/dm-31
[ 64.466746] EXT4-fs (dm-19): mounting ext3 file system using the ext4 subsystem
[ 66.016165] EXT4-fs (dm-18): mounting ext3 file system using the ext4 subsystem
[ 66.495316] EXT4-fs (dm-19): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro
[ 66.698979] SELinux: initialized (dev dm-19, type ext3), uses xattr
[ 66.870006] EXT4-fs (dm-42): mounting with "discard" option, but the device does not support discard
[ 66.880067] EXT4-fs (dm-42): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
[ 66.893861] EXT4-fs (dm-18): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro
[ 66.987473] SELinux: initialized (dev dm-42, type ext4), uses xattr
[ 67.073892] SELinux: initialized (dev dm-18, type ext3), uses xattr
[ 67.867925] EXT4-fs (dm-47): mounting with "discard" option, but the device does not support discard
[ 67.878008] EXT4-fs (dm-47): mounted filesystem without journal. Opts: discard,errors=remount-ro
[ 67.887737] SELinux: initialized (dev dm-47, type ext4), uses xattr
[ 69.591517] audit: type=1305 audit(1425312632.693:4): audit_pid=1129 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 79.608811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 79.614787] Bluetooth: BNEP filters: protocol multicast
[ 79.622294] Bluetooth: BNEP socket layer initialized
[ 79.732282] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 82.306199] r8169 0000:02:00.0 p4p1: link down
[ 82.311435] r8169 0000:02:00.0 p4p1: link down
[ 82.317801] IPv6: ADDRCONF(NETDEV_UP): p4p1: link is not ready
[ 84.209636] r8169 0000:02:00.0 p4p1: link up
[ 84.214550] IPv6: ADDRCONF(NETDEV_CHANGE): p4p1: link becomes ready
[ 89.799177] systemd[1]: Unit SABnzbd@multi-user.service entered failed state.
[ 89.818130] systemd[1]: SABnzbd@multi-user.service failed.
[ 90.094576] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 90.756371] systemd[1]: Received SIGRTMIN+21 from PID 281 (plymouthd).
[ 90.805819] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 90.845091] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 91.041062] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 91.041155] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 91.045735] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 91.050514] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 92.251528] [drm:i915_gem_open]
[ 92.251627] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 92.251630] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 92.251631] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 92.251632] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 92.251634] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 92.251635] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 92.251636] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 92.251637] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 92.251638] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
[ 92.251640] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
[ 92.251641] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 92.251642] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 92.792150] [drm:i915_gem_open]
[ 92.792215] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 92.826253] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 92.826288] [drm:drm_mode_addfb] [FB:96]
[ 92.826670] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 92.826675] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 92.826859] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 92.826881] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 92.826889] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 92.827335] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 92.827339] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
[ 92.827342] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
[ 92.854981] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 92.855005] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
[ 92.855009] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 92.855012] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
[ 92.855014] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 92.855017] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 92.855020] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
[ 92.855022] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 92.855025] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 92.855028] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 92.855030] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 92.855033] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 92.855035] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 92.855038] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 92.855040] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 92.855043] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 92.855046] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 92.855048] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 92.855051] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 92.855053] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 92.855056] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 92.855058] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 92.855061] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 92.855063] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 92.855072] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 92.857671] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 92.857701] [drm:drm_mode_addfb] [FB:96]
[ 92.857912] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 92.857917] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 92.857945] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 92.857959] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 92.857996] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 92.858784] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 92.858788] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1]
[ 92.858792] [drm:intel_crt_detect] [CONNECTOR:17:VGA-1] force=1
[ 92.858797] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1
[ 92.858798] [drm:intel_crt_detect] CRT detected via hotplug
[ 92.871906] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 92.871962] [drm:drm_mode_debug_printmodeline] Modeline 97:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 92.871964] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 92.871967] [drm:drm_mode_debug_printmodeline] Modeline 98:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 92.871968] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 92.871971] [drm:drm_mode_debug_printmodeline] Modeline 136:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
[ 92.871972] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
[ 92.871974] [drm:drm_mode_debug_printmodeline] Modeline 141:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 92.871976] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 92.871981] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1] probed modes :
[ 92.871984] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 92.871986] [drm:drm_mode_debug_printmodeline] Modeline 70:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 92.871989] [drm:drm_mode_debug_printmodeline] Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6
[ 92.871991] [drm:drm_mode_debug_printmodeline] Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[ 92.871993] [drm:drm_mode_debug_printmodeline] Modeline 74:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
[ 92.871996] [drm:drm_mode_debug_printmodeline] Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 92.871998] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 92.872000] [drm:drm_mode_debug_printmodeline] Modeline 69:"1440x900" 85 157000 1440 1544 1696 1952 900 903 909 948 0x40 0x6
[ 92.872003] [drm:drm_mode_debug_printmodeline] Modeline 68:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 92.872005] [drm:drm_mode_debug_printmodeline] Modeline 67:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[ 92.872007] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x960" 85 148500 1280 1344 1504 1728 960 961 964 1011 0x40 0x5
[ 92.872010] [drm:drm_mode_debug_printmodeline] Modeline 61:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 92.872012] [drm:drm_mode_debug_printmodeline] Modeline 73:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
[ 92.872015] [drm:drm_mode_debug_printmodeline] Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[ 92.872017] [drm:drm_mode_debug_printmodeline] Modeline 60:"1280x800" 85 122500 1280 1360 1496 1712 800 803 809 843 0x40 0x6
[ 92.872019] [drm:drm_mode_debug_printmodeline] Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[ 92.872021] [drm:drm_mode_debug_printmodeline] Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[ 92.872024] [drm:drm_mode_debug_printmodeline] Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 92.872026] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x768" 85 117500 1280 1360 1496 1712 768 771 778 809 0x40 0x6
[ 92.872028] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[ 92.872031] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[ 92.872033] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768i" 86 44900 1024 1032 1208 1264 768 768 776 817 0x40 0x15
[ 92.872035] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 92.872038] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 92.872040] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 92.872042] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 92.872045] [drm:drm_mode_debug_printmodeline] Modeline 72:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
[ 92.872047] [drm:drm_mode_debug_printmodeline] Modeline 45:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 92.872049] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 92.872052] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 92.872054] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 92.872056] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 92.872058] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 92.872061] [drm:drm_mode_debug_printmodeline] Modeline 54:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 92.872063] [drm:drm_mode_debug_printmodeline] Modeline 52:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 92.872065] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 92.872068] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 92.872070] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 92.872072] [drm:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 92.872074] [drm:drm_mode_debug_printmodeline] Modeline 38:"720x400" 88 35500 720 738 846 900 400 421 423 449 0x40 0xa
[ 92.872077] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x400" 85 35500 720 756 828 936 400 401 404 446 0x40 0x6
[ 92.872079] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 92.872081] [drm:drm_mode_debug_printmodeline] Modeline 50:"640x400" 85 31500 640 672 736 832 400 401 404 445 0x40 0x6
[ 92.872083] [drm:drm_mode_debug_printmodeline] Modeline 49:"640x350" 85 31500 640 672 736 832 350 382 385 445 0x40 0x9
[ 92.872096] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 93.292475] [drm:drm_mode_addfb] [FB:96]
[ 93.367537] [drm:drm_mode_setcrtc] [CRTC:7]
[ 93.367542] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
[ 93.367544] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
[ 93.367546] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[ 93.367548] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 93.367549] [drm:drm_mode_debug_printmodeline] Modeline 97:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 93.367550] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
[ 93.367552] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [NOCRTC]
[ 93.367553] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 93.367554] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 93.367555] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 93.367556] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 93.367557] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[ 93.367558] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
[ 93.367560] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
[ 93.367562] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[ 93.367563] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[ 93.367564] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 93.367565] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
[ 93.367566] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 93.367567] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 93.367568] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 93.367569] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 93.367570] [drm:intel_dump_pipe_config] requested mode:
[ 93.367571] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 93.367572] [drm:intel_dump_pipe_config] adjusted mode:
[ 93.367574] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 93.367575] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
[ 93.367576] [drm:intel_dump_pipe_config] port clock: 162000
[ 93.367577] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
[ 93.367578] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 93.367579] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 93.367580] [drm:intel_dump_pipe_config] ips: 0
[ 93.367581] [drm:intel_dump_pipe_config] double wide: 0
[ 93.386455] [drm:intel_update_fbc] disabled per chip default
[ 93.386459] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 11
[ 93.386461] [drm:intel_disable_shared_dpll] disabling WRPLL 1
[ 93.400458] [drm:hsw_crt_post_disable] Disabling SPLL
[ 93.400464] [drm:intel_update_fbc] no output, disabling
[ 93.401246] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
[ 93.401247] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
[ 93.401249] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
[ 93.401250] [drm:intel_enable_shared_dpll] enabling WRPLL 1
[ 93.401280] [drm:ironlake_update_primary_plane] Writing base 009DD000 00000000 0 0 6656
[ 93.401352] [drm:intel_update_fbc] disabled per chip default
[ 93.401356] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 93.401357] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 93.401359] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 93.401360] [drm:check_crtc_state] [CRTC:7]
[ 93.401365] [drm:check_crtc_state] [CRTC:11]
[ 93.401366] [drm:check_crtc_state] [CRTC:15]
[ 93.401367] [drm:check_shared_dpll_state] WRPLL 1
[ 93.401368] [drm:check_shared_dpll_state] WRPLL 2
[ 93.403420] [drm:drm_mode_addfb] [FB:97]
[ 93.403477] [drm:drm_mode_setcrtc] [CRTC:11]
[ 93.403479] [drm:drm_mode_setcrtc] [CONNECTOR:17:VGA-1]
[ 93.403481] [drm:intel_crtc_set_config] [CRTC:11] [FB:97] #connectors=1 (x y) (0 0)
[ 93.403483] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 93.403484] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
[ 93.403486] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 93.403487] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
[ 93.403488] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 93.403489] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 93.403490] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 93.403492] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 93.403494] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
[ 93.403496] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
[ 93.403497] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 93.403498] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B
[ 93.403499] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 93.403500] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 93.403501] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 7549747, gmch_n: 8388608, link_m: 314572, link_n: 524288, tu: 64
[ 93.403502] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 93.403503] [drm:intel_dump_pipe_config] requested mode:
[ 93.403505] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 93.403506] [drm:intel_dump_pipe_config] adjusted mode:
[ 93.403508] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 93.403509] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
[ 93.403510] [drm:intel_dump_pipe_config] port clock: 270000
[ 93.403511] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
[ 93.403512] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 93.403513] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 93.403514] [drm:intel_dump_pipe_config] ips: 0
[ 93.403515] [drm:intel_dump_pipe_config] double wide: 0
[ 93.403531] [drm:ironlake_update_primary_plane] Writing base 0117C000 00000000 0 0 6656
[ 93.404421] [drm:hsw_fdi_link_train] FDI link training done on step 0
[ 93.404518] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 162000KHz refresh rate: auxdiv=0, divsel=e, phasedir=0, phaseinc=2a
[ 93.405252] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 93.414819] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 93.421965] [drm:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo underrun on pipe B
[ 93.430838] [drm:ivb_err_int_handler] *ERROR* Pipe B FIFO underrun
[ 93.437481] [drm:intel_update_fbc] more than one pipe active, disabling compression
[ 93.437487] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 93.437490] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 93.437491] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 93.437493] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 93.437494] [drm:check_crtc_state] [CRTC:7]
[ 93.437499] [drm:check_crtc_state] [CRTC:11]
[ 93.437506] [drm:check_crtc_state] [CRTC:15]
[ 93.437508] [drm:check_shared_dpll_state] WRPLL 1
[ 93.437509] [drm:check_shared_dpll_state] WRPLL 2
[ 94.267670] Bridge firewalling registered
[ 94.328267] tun: Universal TUN/TAP device driver, 1.6
[ 94.333323] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 94.382282] device virbr3-nic entered promiscuous mode
[ 94.398906] virbr3: port 1(virbr3-nic) entered forwarding state
[ 94.404842] virbr3: port 1(virbr3-nic) entered forwarding state
[ 94.810176] usblp0: removed
[ 94.816313] usblp 3-4:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E9
[ 94.972271] virbr3: port 1(virbr3-nic) entered disabled state
[ 95.051234] device virbr2-nic entered promiscuous mode
[ 95.065574] virbr2: port 1(virbr2-nic) entered forwarding state
[ 95.071574] virbr2: port 1(virbr2-nic) entered forwarding state
[ 95.214189] virbr2: port 1(virbr2-nic) entered disabled state
[ 95.263762] IPv6: ADDRCONF(NETDEV_UP): virbr2-nic: link is not ready
[ 95.270192] virbr2: port 1(virbr2-nic) entered listening state
[ 95.276100] virbr2: port 1(virbr2-nic) entered listening state
[ 95.298309] device virbr0-nic entered promiscuous mode
[ 95.317877] virbr0: port 1(virbr0-nic) entered forwarding state
[ 95.323815] virbr0: port 1(virbr0-nic) entered forwarding state
[ 95.391015] virbr2: port 1(virbr2-nic) entered disabled state
[ 95.524081] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 95.779961] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 95.779966] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
[ 95.779969] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
[ 95.806875] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 95.806891] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
[ 95.806894] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 95.806896] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
[ 95.806897] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 95.806899] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 95.806900] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
[ 95.806902] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 95.806903] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 95.806905] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 95.806906] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 95.806908] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 95.806909] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 95.806911] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 95.806912] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 95.806914] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 95.806915] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 95.806917] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 95.806918] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 95.806919] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 95.806921] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 95.806922] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 95.806924] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 95.806925] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 95.806936] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 95.807056] [drm:drm_mode_setcrtc] [CRTC:7]
[ 95.807058] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
[ 95.807060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
[ 95.807061] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [NOCRTC]
[ 95.807062] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 95.807063] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
[ 95.807064] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 95.807065] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[ 95.807067] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 95.822352] [drm:intel_update_fbc] disabled per chip default
[ 95.822356] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 7
[ 95.822357] [drm:intel_disable_shared_dpll] disabling WRPLL 1
[ 95.822365] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 95.822367] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 95.822369] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 95.822370] [drm:check_crtc_state] [CRTC:7]
[ 95.822372] [drm:check_crtc_state] [CRTC:11]
[ 95.822380] [drm:check_crtc_state] [CRTC:15]
[ 95.822381] [drm:check_shared_dpll_state] WRPLL 1
[ 95.822382] [drm:check_shared_dpll_state] WRPLL 2
[ 95.824615] [drm:drm_mode_addfb] [FB:98]
[ 95.824888] [drm:drm_mode_setcrtc] [CRTC:7]
[ 95.824893] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
[ 95.824894] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
[ 95.824896] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 95.824897] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
[ 95.824898] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 95.824900] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
[ 95.824901] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 95.824902] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 95.824903] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 95.824904] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 95.824907] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
[ 95.824908] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[ 95.824909] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[ 95.824911] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 95.824912] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
[ 95.824913] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 95.824914] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 95.824915] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 95.824916] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 95.824917] [drm:intel_dump_pipe_config] requested mode:
[ 95.824919] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 95.824920] [drm:intel_dump_pipe_config] adjusted mode:
[ 95.824922] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 95.824923] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
[ 95.824924] [drm:intel_dump_pipe_config] port clock: 162000
[ 95.824925] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
[ 95.824926] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 95.824927] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 95.824928] [drm:intel_dump_pipe_config] ips: 0
[ 95.824929] [drm:intel_dump_pipe_config] double wide: 0
[ 95.838295] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
[ 95.838298] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
[ 95.838301] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
[ 95.838302] [drm:intel_enable_shared_dpll] enabling WRPLL 1
[ 95.838332] [drm:ironlake_update_primary_plane] Writing base 009DD000 00000000 0 0 6656
[ 95.856391] [drm:intel_update_fbc] more than one pipe active, disabling compression
[ 95.856397] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 95.856400] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 95.856402] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 95.856403] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 95.856404] [drm:check_crtc_state] [CRTC:7]
[ 95.856410] [drm:check_crtc_state] [CRTC:11]
[ 95.856417] [drm:check_crtc_state] [CRTC:15]
[ 95.856418] [drm:check_shared_dpll_state] WRPLL 1
[ 95.856419] [drm:check_shared_dpll_state] WRPLL 2
[ 95.879057] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 96.123371] virbr0: port 1(virbr0-nic) entered disabled state
[ 96.190405] device virbr1-nic entered promiscuous mode
[ 96.209943] virbr1: port 1(virbr1-nic) entered forwarding state
[ 96.215939] virbr1: port 1(virbr1-nic) entered forwarding state
[ 96.497007] virbr1: port 1(virbr1-nic) entered disabled state
[ 103.407390] [drm:add_framebuffer_internal] [FB:99]
[ 113.775394] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 113.781397] Bluetooth: HIDP socket layer initialized
[ 113.786801] ttyS0: 1 input overrun(s)
[ 113.787430] hid-generic 0005:046D:B010.0002: unknown main item tag 0x0
[ 113.797278] input: Bluetooth Mouse M557 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/bluetooth/hci0/hci0:11/0005:046D:B010.0002/input/input15
[ 113.813659] hid-generic 0005:046D:B010.0002: input,hidraw1: BLUETOOTH HID v10.01 Mouse [Bluetooth Mouse M557] on 00:0d:18:01:3b:9b
[ 137.017008] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 154.059134] [drm:intel_crtc_cursor_set_obj] cursor off
[ 154.209170] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 154.209172] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip
[ 154.209172] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[ 154.209174] [drm:drm_mode_debug_printmodeline] Modeline 99:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 154.209176] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 154.209176] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
[ 154.209177] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [NOCRTC]
[ 154.209178] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 154.209178] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.209179] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 154.209179] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 154.209180] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[ 154.209181] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
[ 154.209183] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
[ 154.209184] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[ 154.209185] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 154.209186] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
[ 154.209186] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 154.209186] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 154.209187] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 7340032, gmch_n: 8388608, link_m: 305834, link_n: 524288, tu: 64
[ 154.209188] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 154.209188] [drm:intel_dump_pipe_config] requested mode:
[ 154.209190] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 154.209190] [drm:intel_dump_pipe_config] adjusted mode:
[ 154.209191] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 154.209192] [drm:intel_dump_crtc_timings] crtc timings: 157500 1280 1344 1504 1728 1024 1025 1028 1072, type: 0x48 flags: 0x5
[ 154.209193] [drm:intel_dump_pipe_config] port clock: 270000
[ 154.209193] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[ 154.209194] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 154.209194] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 154.209195] [drm:intel_dump_pipe_config] ips: 0
[ 154.209195] [drm:intel_dump_pipe_config] double wide: 0
[ 154.240737] [drm:hsw_crt_post_disable] Disabling SPLL
[ 154.240742] [drm:intel_update_fbc] no output, disabling
[ 154.242737] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 7
[ 154.242739] [drm:intel_disable_shared_dpll] disabling WRPLL 1
[ 154.242754] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
[ 154.243649] [drm:hsw_fdi_link_train] FDI link training done on step 0
[ 154.243729] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 157500KHz refresh rate: auxdiv=0, divsel=f, phasedir=0, phaseinc=9
[ 154.243786] [drm:intel_update_fbc] disabled per chip default
[ 154.243788] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 154.243789] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 154.243790] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 154.243791] [drm:check_crtc_state] [CRTC:7]
[ 154.243798] [drm:check_crtc_state] [CRTC:11]
[ 154.243799] [drm:check_crtc_state] [CRTC:15]
[ 154.243799] [drm:check_shared_dpll_state] WRPLL 1
[ 154.243800] [drm:check_shared_dpll_state] WRPLL 2
[ 154.243802] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 154.243803] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 154.243803] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
[ 154.243804] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 154.243804] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.243805] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.243806] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 154.243806] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 154.243807] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 154.243808] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
[ 154.243809] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[ 154.243809] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[ 154.243810] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 154.243810] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B
[ 154.243811] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 154.243811] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 154.243812] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 154.243813] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 154.243813] [drm:intel_dump_pipe_config] requested mode:
[ 154.243814] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 154.243815] [drm:intel_dump_pipe_config] adjusted mode:
[ 154.243816] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 154.243817] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x48 flags: 0x5
[ 154.243817] [drm:intel_dump_pipe_config] port clock: 162000
[ 154.243818] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
[ 154.243818] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 154.243819] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 154.243819] [drm:intel_dump_pipe_config] ips: 0
[ 154.243820] [drm:intel_dump_pipe_config] double wide: 0
[ 154.244601] [drm:intel_get_shared_dpll] CRTC:11 allocated WRPLL 1
[ 154.244601] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe B
[ 154.244602] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 11
[ 154.244603] [drm:intel_enable_shared_dpll] enabling WRPLL 1
[ 154.244631] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
[ 154.267773] [drm:intel_update_fbc] more than one pipe active, disabling compression
[ 154.267776] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
[ 154.267778] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 154.267782] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 154.267785] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 154.267786] [drm:check_crtc_state] [CRTC:7]
[ 154.267792] [drm:check_crtc_state] [CRTC:11]
[ 154.267796] [drm:check_crtc_state] [CRTC:15]
[ 154.267797] [drm:check_shared_dpll_state] WRPLL 1
[ 154.267798] [drm:check_shared_dpll_state] WRPLL 2
[ 154.267799] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
[ 154.267800] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
[ 154.267801] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.267801] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.267804] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 154.267805] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 154.267806] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.267807] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.267807] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 154.267808] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 154.267809] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.267809] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.267816] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 154.267817] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 154.267817] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.267817] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.267818] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 154.267819] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 154.267819] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.267820] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.287004] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 154.287009] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 154.287011] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.287012] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.287014] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 154.287016] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 154.287017] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.287018] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.287019] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
[ 154.287020] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
[ 154.287021] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.287022] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.324002] [drm:i915_gem_open]
[ 154.324047] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
[ 154.324050] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 154.324051] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.324052] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.324054] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
[ 154.324055] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 154.324056] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.324057] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.324059] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
[ 154.324060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
[ 154.324061] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
[ 154.324062] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
[ 154.327155] [drm:i915_gem_open]
[ 154.327182] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.327687] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.327701] [drm:drm_mode_addfb] [FB:96]
[ 154.327845] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.327848] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.327875] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 154.327889] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 154.327894] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 154.328012] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 154.328014] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
[ 154.328016] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
[ 154.354769] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 154.354782] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
[ 154.354785] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 154.354787] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
[ 154.354788] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 154.354790] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 154.354791] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
[ 154.354793] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 154.354794] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 154.354796] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 154.354797] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 154.354799] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 154.354800] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 154.354802] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 154.354803] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 154.354805] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 154.354806] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 154.354808] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 154.354809] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 154.354810] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 154.354812] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 154.354813] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 154.354815] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 154.354816] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 154.354823] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 154.355641] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.355662] [drm:drm_mode_addfb] [FB:96]
[ 154.356935] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.356938] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.356958] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 154.356981] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 154.357013] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 154.357096] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 154.357098] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1]
[ 154.357100] [drm:intel_crt_detect] [CONNECTOR:17:VGA-1] force=1
[ 154.357104] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1
[ 154.357105] [drm:intel_crt_detect] CRT detected via hotplug
[ 154.370195] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 154.370231] [drm:drm_mode_debug_printmodeline] Modeline 97:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 154.370233] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 154.370234] [drm:drm_mode_debug_printmodeline] Modeline 98:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 154.370235] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 154.370237] [drm:drm_mode_debug_printmodeline] Modeline 136:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
[ 154.370238] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
[ 154.370239] [drm:drm_mode_debug_printmodeline] Modeline 141:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 154.370240] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
[ 154.370244] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1] probed modes :
[ 154.370245] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 154.370247] [drm:drm_mode_debug_printmodeline] Modeline 70:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 154.370248] [drm:drm_mode_debug_printmodeline] Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6
[ 154.370250] [drm:drm_mode_debug_printmodeline] Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[ 154.370252] [drm:drm_mode_debug_printmodeline] Modeline 74:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
[ 154.370253] [drm:drm_mode_debug_printmodeline] Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 154.370255] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 154.370256] [drm:drm_mode_debug_printmodeline] Modeline 69:"1440x900" 85 157000 1440 1544 1696 1952 900 903 909 948 0x40 0x6
[ 154.370258] [drm:drm_mode_debug_printmodeline] Modeline 68:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 154.370259] [drm:drm_mode_debug_printmodeline] Modeline 67:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[ 154.370261] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x960" 85 148500 1280 1344 1504 1728 960 961 964 1011 0x40 0x5
[ 154.370262] [drm:drm_mode_debug_printmodeline] Modeline 61:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 154.370264] [drm:drm_mode_debug_printmodeline] Modeline 73:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
[ 154.370265] [drm:drm_mode_debug_printmodeline] Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[ 154.370267] [drm:drm_mode_debug_printmodeline] Modeline 60:"1280x800" 85 122500 1280 1360 1496 1712 800 803 809 843 0x40 0x6
[ 154.370268] [drm:drm_mode_debug_printmodeline] Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[ 154.370270] [drm:drm_mode_debug_printmodeline] Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[ 154.370271] [drm:drm_mode_debug_printmodeline] Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 154.370273] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x768" 85 117500 1280 1360 1496 1712 768 771 778 809 0x40 0x6
[ 154.370274] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[ 154.370275] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[ 154.370277] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768i" 86 44900 1024 1032 1208 1264 768 768 776 817 0x40 0x15
[ 154.370279] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 154.370280] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 154.370281] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 154.370283] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 154.370284] [drm:drm_mode_debug_printmodeline] Modeline 72:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
[ 154.370286] [drm:drm_mode_debug_printmodeline] Modeline 45:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 154.370287] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 154.370289] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 154.370290] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 154.370292] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 154.370293] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 154.370295] [drm:drm_mode_debug_printmodeline] Modeline 54:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 154.370296] [drm:drm_mode_debug_printmodeline] Modeline 52:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 154.370298] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 154.370299] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 154.370301] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 154.370302] [drm:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 154.370304] [drm:drm_mode_debug_printmodeline] Modeline 38:"720x400" 88 35500 720 738 846 900 400 421 423 449 0x40 0xa
[ 154.370305] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x400" 85 35500 720 756 828 936 400 401 404 446 0x40 0x6
[ 154.370306] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 154.370308] [drm:drm_mode_debug_printmodeline] Modeline 50:"640x400" 85 31500 640 672 736 832 400 401 404 445 0x40 0x6
[ 154.370309] [drm:drm_mode_debug_printmodeline] Modeline 49:"640x350" 85 31500 640 672 736 832 350 382 385 445 0x40 0x9
[ 154.370317] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
[ 154.418945] [drm:drm_mode_addfb] [FB:96]
[ 154.419144] [drm:drm_mode_setcrtc] [CRTC:7]
[ 154.419147] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
[ 154.419149] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
[ 154.419151] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[ 154.419153] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
[ 154.419155] [drm:drm_mode_debug_printmodeline] Modeline 97:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 154.419156] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
[ 154.419157] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [NOCRTC]
[ 154.419158] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 154.419159] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 154.419160] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 154.419161] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 154.419162] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[ 154.419164] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
[ 154.419165] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
[ 154.419167] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[ 154.419168] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[ 154.419169] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 154.419171] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
[ 154.419172] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 154.419173] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 154.419174] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 154.419175] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 154.419176] [drm:intel_dump_pipe_config] requested mode:
[ 154.419177] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 154.419178] [drm:intel_dump_pipe_config] adjusted mode:
[ 154.419180] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 154.419181] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
[ 154.419182] [drm:intel_dump_pipe_config] port clock: 162000
[ 154.419183] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
[ 154.419184] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 154.419185] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 154.419186] [drm:intel_dump_pipe_config] ips: 0
[ 154.419187] [drm:intel_dump_pipe_config] double wide: 0
[ 154.429977] [drm:intel_update_fbc] disabled per chip default
[ 154.429980] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 11
[ 154.429982] [drm:intel_disable_shared_dpll] disabling WRPLL 1
[ 154.443999] [drm:hsw_crt_post_disable] Disabling SPLL
[ 154.444005] [drm:intel_update_fbc] no output, disabling
[ 154.444785] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
[ 154.444786] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
[ 154.444788] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
[ 154.444789] [drm:intel_enable_shared_dpll] enabling WRPLL 1
[ 154.444818] [drm:ironlake_update_primary_plane] Writing base 02109000 00000000 0 0 6656
[ 154.444890] [drm:intel_update_fbc] disabled per chip default
[ 154.444893] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 154.444895] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 154.444896] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 154.444897] [drm:check_crtc_state] [CRTC:7]
[ 154.444902] [drm:check_crtc_state] [CRTC:11]
[ 154.444903] [drm:check_crtc_state] [CRTC:15]
[ 154.444904] [drm:check_shared_dpll_state] WRPLL 1
[ 154.444906] [drm:check_shared_dpll_state] WRPLL 2
[ 154.447605] [drm:drm_mode_addfb] [FB:97]
[ 154.447658] [drm:drm_mode_setcrtc] [CRTC:11]
[ 154.447662] [drm:drm_mode_setcrtc] [CONNECTOR:17:VGA-1]
[ 154.447663] [drm:intel_crtc_set_config] [CRTC:11] [FB:97] #connectors=1 (x y) (0 0)
[ 154.447665] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 154.447666] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[ 154.447669] [drm:drm_mode_debug_printmodeline] Modeline 94:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 154.447670] [drm:drm_mode_debug_printmodeline] Modeline 98:"" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 154.447671] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
[ 154.447672] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 154.447674] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
[ 154.447675] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 154.447676] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 154.447677] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 154.447679] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 154.447680] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
[ 154.447682] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
[ 154.447683] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
[ 154.447684] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
[ 154.447685] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
[ 154.447685] [drm:intel_modeset_pipe_config] CRTC bw constrained, retrying
[ 154.447686] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
[ 154.447687] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
[ 154.447688] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
[ 154.447689] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
[ 154.447690] ------------[ cut here ]------------
[ 154.452346] WARNING: CPU: 1 PID: 2151 at drivers/gpu/drm/i915/intel_display.c:10173 __intel_set_mode+0x15fb/0x16f0 [i915]()
[ 154.463524] loop in pipe configuration computation
[ 154.468336] Modules linked in: hidp xt_CHECKSUM iptable_mangle
[ 154.472809] ttyS0: 6 input overrun(s)
[ 154.477778] ipt_MASQUERADE
[ 154.480642] iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc bnep hwmon_vid btrfs xor raid6_pq uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media iTCO_wdt iTCO_vendor_support ppdev btusb snd_usb_audio bluetooth snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_usbmidi_lib x86_pkg_temp_thermal snd_rawmidi rfkill coretemp usblp kvm_intel kvm snd_hda_intel snd_hda_controller crct10dif_pclmul snd_hda_codec i915 crc32_pclmul crc32c_intel snd_hwdep ghash_clmulni_intel snd_seq snd_seq_device snd_pcm i2c_algo_bit drm_kms_helper snd_timer serio_raw snd sata_via i2c_i801 drm lpc_ich mfd_core shpchp soundcore mei_me mei tpm_infineon tpm_tis tpm parport_pc parport nfsd auth_rpcgss nfs_acl lockd sunrpc
[ 154.552918] r8169 mii video
[ 154.554614] CPU: 1 PID: 2151 Comm: Xorg.bin Not tainted 3.17.7-300.fc21.x86_64 #1
[ 154.562102] Hardware name: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
[ 154.570935] 0000000000000000 0000000052a00808 ffff8803f3cffaf8 ffffffff817401ea
[ 154.578542] ffff8803f3cffb40 ffff8803f3cffb30 ffffffff810970bd ffffffffffffffea
[ 154.586117] ffff880406dcf000 ffff880407742800 0000000000000001 ffff880406958b40
[ 154.593633] Call Trace:
[ 154.596094] [<ffffffff817401ea>] dump_stack+0x45/0x56
[ 154.601282] [<ffffffff810970bd>] warn_slowpath_common+0x7d/0xa0
[ 154.607337] [<ffffffff8109713c>] warn_slowpath_fmt+0x5c/0x80
[ 154.613147] [<ffffffffa0291958>] ? __intel_set_mode+0x988/0x16f0 [i915]
[ 154.619892] [<ffffffffa02925cb>] __intel_set_mode+0x15fb/0x16f0 [i915]
[ 154.626555] [<ffffffffa029a0d6>] intel_set_mode+0x16/0x30 [i915]
[ 154.632698] [<ffffffffa029b22a>] intel_crtc_set_config+0xa9a/0xeb0 [i915]
[ 154.639627] [<ffffffffa0155a34>] drm_mode_set_config_internal+0x64/0xe0 [drm]
[ 154.646894] [<ffffffffa015a14b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
[ 154.653293] [<ffffffffa014be6f>] drm_ioctl+0x1df/0x680 [drm]
[ 154.659088] [<ffffffff81220ff0>] do_vfs_ioctl+0x2d0/0x4b0
[ 154.664621] [<ffffffff81221251>] SyS_ioctl+0x81/0xa0
[ 154.669723] [<ffffffff81135d96>] ? __audit_syscall_exit+0x1f6/0x2a0
[ 154.676128] [<ffffffff817473a9>] system_call_fastpath+0x16/0x1b
[ 154.682184] ---[ end trace dc5bdfed07eb12f9 ]---
[ 154.686852] [drm:intel_crtc_set_config] failed to set mode on [CRTC:11], err = -22
[ 154.687021] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[ 154.687031] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 154.687032] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 154.687034] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 154.687037] [drm:check_crtc_state] [CRTC:7]
[ 154.687044] [drm:check_crtc_state] [CRTC:11]
[ 154.687047] [drm:check_crtc_state] [CRTC:15]
[ 154.687050] [drm:check_shared_dpll_state] WRPLL 1
[ 154.687051] [drm:check_shared_dpll_state] WRPLL 2
[ 154.689818] [drm:drm_mode_addfb] [FB:98]
[ 154.689869] [drm:drm_mode_setcrtc] [CRTC:11]
[ 154.689872] [drm:drm_mode_setcrtc] [CONNECTOR:17:VGA-1]
[ 154.689874] [drm:intel_crtc_set_config] [CRTC:11] [FB:98] #connectors=1 (x y) (0 0)
[ 154.689876] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 154.689877] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[ 154.689879] [drm:drm_mode_debug_printmodeline] Modeline 94:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 154.689881] [drm:drm_mode_debug_printmodeline] Modeline 99:"" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 154.689882] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
[ 154.689883] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 154.689885] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
[ 154.689886] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 154.689887] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 154.689888] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 154.689890] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 154.689891] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
[ 154.689893] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
[ 154.689894] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
[ 154.689895] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
[ 154.689896] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
[ 154.689897] [drm:intel_modeset_pipe_config] CRTC bw constrained, retrying
[ 154.689898] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
[ 154.689898] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
[ 154.689899] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
[ 154.689900] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
[ 154.689901] ------------[ cut here ]------------
[ 154.694554] WARNING: CPU: 1 PID: 2151 at drivers/gpu/drm/i915/intel_display.c:10173 __intel_set_mode+0x15fb/0x16f0 [i915]()
[ 154.705708] loop in pipe configuration computation
[ 154.710540] Modules linked in: hidp xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc bnep hwmon_vid btrfs xor raid6_pq uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media iTCO_wdt iTCO_vendor_support ppdev btusb snd_usb_audio bluetooth snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_usbmidi_lib x86_pkg_temp_thermal snd_rawmidi rfkill coretemp usblp kvm_intel kvm snd_hda_intel snd_hda_controller crct10dif_pclmul snd_hda_codec i915 crc32_pclmul crc32c_intel snd_hwdep ghash_clmulni_intel snd_seq snd_seq_device snd_pcm i2c_algo_bit drm_kms_helper snd_timer serio_raw snd sata_via i2c_i801 drm lpc_ich mfd_core shpchp soundcore mei_me mei tpm_infineon
[ 154.783599] tpm_tis tpm parport_pc parport nfsd auth_rpcgss nfs_acl lockd sunrpc r8169 mii video
[ 154.791600] CPU: 1 PID: 2151 Comm: Xorg.bin Tainted: G W 3.17.7-300.fc21.x86_64 #1
[ 154.800209] Hardware name: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
[ 154.809033] 0000000000000000 0000000052a00808 ffff8803f3cffaf8 ffffffff817401ea
[ 154.816597] ffff8803f3cffb40 ffff8803f3cffb30 ffffffff810970bd ffffffffffffffea
[ 154.824208] ffff880406dcf000 ffff880407742800 0000000000000001 ffff880406958b40
[ 154.831749] Call Trace:
[ 154.834254] [<ffffffff817401ea>] dump_stack+0x45/0x56
[ 154.839441] [<ffffffff810970bd>] warn_slowpath_common+0x7d/0xa0
[ 154.845494] [<ffffffff8109713c>] warn_slowpath_fmt+0x5c/0x80
[ 154.851301] [<ffffffffa0291958>] ? __intel_set_mode+0x988/0x16f0 [i915]
[ 154.858053] [<ffffffffa02925cb>] __intel_set_mode+0x15fb/0x16f0 [i915]
[ 154.864716] [<ffffffffa029a0d6>] intel_set_mode+0x16/0x30 [i915]
[ 154.870860] [<ffffffffa029b22a>] intel_crtc_set_config+0xa9a/0xeb0 [i915]
[ 154.877782] [<ffffffffa0155a34>] drm_mode_set_config_internal+0x64/0xe0 [drm]
[ 154.885051] [<ffffffffa015a14b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
[ 154.891453] [<ffffffffa014be6f>] drm_ioctl+0x1df/0x680 [drm]
[ 154.897248] [<ffffffff81220ff0>] do_vfs_ioctl+0x2d0/0x4b0
[ 154.902783] [<ffffffff81221251>] SyS_ioctl+0x81/0xa0
[ 154.907884] [<ffffffff81135d96>] ? __audit_syscall_exit+0x1f6/0x2a0
[ 154.914288] [<ffffffff817473a9>] system_call_fastpath+0x16/0x1b
[ 154.920341] ---[ end trace dc5bdfed07eb12fa ]---
[ 154.924958] [drm:intel_crtc_set_config] failed to set mode on [CRTC:11], err = -22
[ 154.925071] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[ 154.925082] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 154.925085] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 154.925087] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 154.925088] [drm:check_crtc_state] [CRTC:7]
[ 154.925099] [drm:check_crtc_state] [CRTC:11]
[ 154.925102] [drm:check_crtc_state] [CRTC:15]
[ 154.925105] [drm:check_shared_dpll_state] WRPLL 1
[ 154.925107] [drm:check_shared_dpll_state] WRPLL 2
[ 154.925157] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[ 154.925159] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 154.925171] [drm:drm_mode_setcrtc] [CRTC:11]
[ 154.925173] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
[ 154.925174] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
[ 154.925175] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 154.984838] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 154.984842] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
[ 154.984846] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
[ 155.011650] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 155.011664] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
[ 155.011666] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
[ 155.011668] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
[ 155.011669] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 155.011671] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 155.011672] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
[ 155.011674] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 155.011675] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
[ 155.011677] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 155.011678] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 155.011680] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 155.011681] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 155.011683] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
[ 155.011684] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 155.011686] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 155.011687] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 155.011688] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 155.011690] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
[ 155.011691] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 155.011693] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 155.011694] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 155.011696] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 155.011697] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 155.011707] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
[ 155.011873] [drm:drm_mode_setcrtc] [CRTC:7]
[ 155.011875] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
[ 155.011877] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
[ 155.011878] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [NOCRTC]
[ 155.011879] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 155.011880] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 155.011881] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
[ 155.011883] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[ 155.013665] [drm:intel_update_fbc] no output, disabling
[ 155.013668] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 7
[ 155.013669] [drm:intel_disable_shared_dpll] disabling WRPLL 1
[ 155.013674] [drm:intel_display_power_put] disabling always-on
[ 155.013679] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 155.013680] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 155.013681] [drm:check_crtc_state] [CRTC:7]
[ 155.013683] [drm:check_crtc_state] [CRTC:11]
[ 155.013684] [drm:check_crtc_state] [CRTC:15]
[ 155.013685] [drm:check_shared_dpll_state] WRPLL 1
[ 155.013686] [drm:check_shared_dpll_state] WRPLL 2
[ 155.015973] [drm:drm_mode_addfb] [FB:99]
[ 155.016111] [drm:drm_mode_setcrtc] [CRTC:7]
[ 155.016114] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
[ 155.016116] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
[ 155.016117] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
[ 155.016119] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
[ 155.016120] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
[ 155.016121] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
[ 155.016122] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
[ 155.016123] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
[ 155.016125] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 155.016127] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
[ 155.016129] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[ 155.016129] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[ 155.016131] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[ 155.016132] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
[ 155.016133] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 155.016134] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 155.016135] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 155.016136] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 155.016137] [drm:intel_dump_pipe_config] requested mode:
[ 155.016139] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 155.016140] [drm:intel_dump_pipe_config] adjusted mode:
[ 155.016141] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
[ 155.016143] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
[ 155.016144] [drm:intel_dump_pipe_config] port clock: 162000
[ 155.016144] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
[ 155.016146] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 155.016147] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 155.016147] [drm:intel_dump_pipe_config] ips: 0
[ 155.016148] [drm:intel_dump_pipe_config] double wide: 0
[ 155.016151] [drm:intel_display_power_get] enabling always-on
[ 155.030187] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
[ 155.030189] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
[ 155.030191] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
[ 155.030192] [drm:intel_enable_shared_dpll] enabling WRPLL 1
[ 155.030222] [drm:ironlake_update_primary_plane] Writing base 02109000 00000000 0 0 6656
[ 155.030312] [drm:intel_update_fbc] disabled per chip default
[ 155.030316] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
[ 155.030318] [drm:check_encoder_state] [ENCODER:18:DAC-18]
[ 155.030319] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
[ 155.030322] [drm:check_crtc_state] [CRTC:7]
[ 155.030331] [drm:check_crtc_state] [CRTC:11]
[ 155.030332] [drm:check_crtc_state] [CRTC:15]
[ 155.030335] [drm:check_shared_dpll_state] WRPLL 1
[ 155.030336] [drm:check_shared_dpll_state] WRPLL 2
[ 155.036925] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 158.340777] [drm:add_framebuffer_internal] [FB:100]
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-02 16:33 ` Brian J. Murrell
@ 2015-03-02 18:07 ` Daniel Vetter
2015-03-02 18:44 ` Ville Syrjälä
2015-03-02 20:08 ` Brian J. Murrell
0 siblings, 2 replies; 15+ messages in thread
From: Daniel Vetter @ 2015-03-02 18:07 UTC (permalink / raw)
To: Brian J. Murrell; +Cc: intel-gfx
On Mon, Mar 02, 2015 at 11:33:39AM -0500, Brian J. Murrell wrote:
> On Mon, 2015-03-02 at 09:07 +0000, Chris Wilson wrote:
>
> > Can you please attach dmesg with drm.debug=6 on the command line?
>
> Please find it attached. I did notice in it though:
>
> [ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> [ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> [ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
>
> Why would it think those modes are invalid?
15 = dotclock too high for your chip.
-Daniel
>
> Cheers,
> b.
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.17.7-300.fc21.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #1 SMP Wed Dec 17 03:08:44 UTC 2014
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.17.7-300.fc21.x86_64 root=/dev/mapper/rootvol-fedora_root ro rd.md=0 rd.dm=0 rd.lvm.lv=rootvol/swap vconsole.keymap=us rd.lvm.lv=rootvol/fedora_root rd.lvm.lv=rootvol/fedora_usr rd.lvm.lv=rootvol/fedora_var rd.luks=0 vconsole.font=latarcyrheb-sun16 console=tty0 console=ttyS0,115200 nord.nodriver.noblacklist=nonouveau drm.debug=6
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c67f1fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000c67f2000-0x00000000c67f8fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000c67f9000-0x00000000c72a8fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000c72a9000-0x00000000c77e9fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000c77ea000-0x00000000d95e0fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000d95e1000-0x00000000d9678fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000d9679000-0x00000000d96bbfff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000d96bc000-0x00000000d977dfff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000d977e000-0x00000000daffefff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-E7FFF uncachable
> [ 0.000000] E8000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
> [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
> [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
> [ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
> [ 0.000000] 4 base 00DB800000 mask 7FFF800000 uncachable
> [ 0.000000] 5 base 041F800000 mask 7FFF800000 uncachable
> [ 0.000000] 6 base 041F600000 mask 7FFFE00000 uncachable
> [ 0.000000] 7 disabled
> [ 0.000000] 8 disabled
> [ 0.000000] 9 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x0202c000, 0x0202cfff] PGTABLE
> [ 0.000000] BRK [0x0202d000, 0x0202dfff] PGTABLE
> [ 0.000000] BRK [0x0202e000, 0x0202efff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x41f400000-0x41f5fffff]
> [ 0.000000] [mem 0x41f400000-0x41f5fffff] page 2M
> [ 0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41f3fffff]
> [ 0.000000] [mem 0x41c000000-0x41f3fffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
> [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc67f1fff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
> [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
> [ 0.000000] [mem 0xc0000000-0xc65fffff] page 2M
> [ 0.000000] [mem 0xc6600000-0xc67f1fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xc67f9000-0xc72a8fff]
> [ 0.000000] [mem 0xc67f9000-0xc67fffff] page 4k
> [ 0.000000] [mem 0xc6800000-0xc71fffff] page 2M
> [ 0.000000] [mem 0xc7200000-0xc72a8fff] page 4k
> [ 0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xc77ea000-0xd95e0fff]
> [ 0.000000] [mem 0xc77ea000-0xc77fffff] page 4k
> [ 0.000000] [mem 0xc7800000-0xd93fffff] page 2M
> [ 0.000000] [mem 0xd9400000-0xd95e0fff] page 4k
> [ 0.000000] BRK [0x02031000, 0x02031fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0xd9679000-0xd96bbfff]
> [ 0.000000] [mem 0xd9679000-0xd96bbfff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
> [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
> [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
> [ 0.000000] RAMDISK: [mem 0x358b1000-0x36c50fff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
> [ 0.000000] ACPI: XSDT 0x00000000D974A078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: FACP 0x00000000D9756E08 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: DSDT 0x00000000D974A178 00CC8D (v02 ALASKA A M I 00000088 INTL 20091112)
> [ 0.000000] ACPI: FACS 0x00000000D977C080 000040
> [ 0.000000] ACPI: APIC 0x00000000D9756F18 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: FPDT 0x00000000D9756F80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.000000] ACPI: SSDT 0x00000000D9756FC8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
> [ 0.000000] ACPI: SSDT 0x00000000D9757508 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
> [ 0.000000] ACPI: MCFG 0x00000000D9757FE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
> [ 0.000000] ACPI: HPET 0x00000000D9758020 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
> [ 0.000000] ACPI: SSDT 0x00000000D9758058 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
> [ 0.000000] ACPI: SSDT 0x00000000D97583C8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41f5fffff]
> [ 0.000000] NODE_DATA [mem 0x41f5e7000-0x41f5fafff]
> [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040ec00000-ffff88041ebfffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x41f5fffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
> [ 0.000000] node 0: [mem 0x00100000-0xc67f1fff]
> [ 0.000000] node 0: [mem 0xc67f9000-0xc72a8fff]
> [ 0.000000] node 0: [mem 0xc77ea000-0xd95e0fff]
> [ 0.000000] node 0: [mem 0xd9679000-0xd96bbfff]
> [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
> [ 0.000000] node 0: [mem 0x100000000-0x41f5fffff]
> [ 0.000000] On node 0 totalpages: 4163193
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 13828 pages used for memmap
> [ 0.000000] DMA32 zone: 884957 pages, LIFO batch:31
> [ 0.000000] Normal zone: 51160 pages used for memmap
> [ 0.000000] Normal zone: 3274240 pages, LIFO batch:31
> [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc67f2000-0xc67f8fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xc72a9000-0xc77e9fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xd95e1000-0xd9678fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xd96bc000-0xd977dfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xd977e000-0xdaffefff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
> [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041f200000 s84352 r8192 d22144 u1048576
> [ 0.000000] pcpu-alloc: s84352 r8192 d22144 u1048576 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098120
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.7-300.fc21.x86_64 root=/dev/mapper/rootvol-fedora_root ro rd.md=0 rd.dm=0 rd.lvm.lv=rootvol/swap vconsole.keymap=us rd.lvm.lv=rootvol/fedora_root rd.lvm.lv=rootvol/fedora_usr rd.lvm.lv=rootvol/fedora_var rd.luks=0 vconsole.font=latarcyrheb-sun16 console=tty0 console=ttyS0,115200 nord.nodriver.noblacklist=nonouveau drm.debug=6
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
> [ 0.000000] Memory: 16287232K/16652772K available (7473K kernel code, 1220K rwdata, 3256K rodata, 1468K init, 1540K bss, 365540K reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
> [ 0.000000] Offload RCU callbacks from all CPUs
> [ 0.000000] Offload RCU callbacks from CPUs: 0-1.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> [ 0.000000] NR_IRQS:65792 nr_irqs:440 0
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] allocated 67108864 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] spurious 8259A interrupt: IRQ7.
> [ 0.000000] tsc: Detected 2793.439 MHz processor
> [ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.87 BogoMIPS (lpj=2793439)
> [ 0.010773] pid_max: default: 32768 minimum: 301
> [ 0.015460] ACPI: Core revision 20140724
> [ 0.028228] ACPI: All ACPI Tables successfully acquired
> [ 0.033879] Security Framework initialized
> [ 0.038044] SELinux: Initializing.
> [ 0.041600] SELinux: Starting in permissive mode
> [ 0.042589] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> [ 0.052709] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [ 0.061143] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.068100] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 0.075692] Initializing cgroup subsys memory
> [ 0.080110] Initializing cgroup subsys devices
> [ 0.084618] Initializing cgroup subsys freezer
> [ 0.089121] Initializing cgroup subsys net_cls
> [ 0.093624] Initializing cgroup subsys blkio
> [ 0.097954] Initializing cgroup subsys perf_event
> [ 0.102719] Initializing cgroup subsys net_prio
> [ 0.107308] Initializing cgroup subsys hugetlb
> [ 0.111832] CPU: Physical Processor ID: 0
> [ 0.115897] CPU: Processor Core ID: 0
> [ 0.120453] mce: CPU supports 7 MCE banks
> [ 0.124531] CPU0: Thermal monitoring enabled (TM1)
> [ 0.129391] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
> Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
> [ 0.142351] Freeing SMP alternatives memory: 28K (ffffffff81ea2000 - ffffffff81ea9000)
> [ 0.151160] ftrace: allocating 27227 entries in 107 pages
> [ 0.166726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> [ 0.182650] smpboot: CPU0: Intel(R) Celeron(R) CPU G1840 @ 2.80GHz (fam: 06, model: 3c, stepping: 03)
> [ 0.192092] TSC deadline timer enabled
> [ 0.192111] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
> [ 0.203973] ... version: 3
> [ 0.208051] ... bit width: 48
> [ 0.212215] ... generic registers: 8
> [ 0.216294] ... value mask: 0000ffffffffffff
> [ 0.221675] ... max period: 0000ffffffffffff
> [ 0.227056] ... fixed-purpose events: 3
> [ 0.231131] ... event mask: 00000007000000ff
> [ 0.237626] x86: Booting SMP configuration:
> [ 0.241884] .... node #0, CPUs: #1
> [ 0.259761] x86: Booted up 1 node, 2 CPUs
> [ 0.264095] smpboot: Total of 2 processors activated (11173.75 BogoMIPS)
> [ 0.270889] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.280187] devtmpfs: initialized
> [ 0.286888] PM: Registering ACPI NVS region [mem 0xc67f2000-0xc67f8fff] (28672 bytes)
> [ 0.294846] PM: Registering ACPI NVS region [mem 0xd96bc000-0xd977dfff] (794624 bytes)
> [ 0.303556] atomic64_test: passed for x86-64 platform with CX8 and with SSE
> [ 0.310595] pinctrl core: initialized pinctrl subsystem
> [ 0.315933] RTC time: 16:09:23, date: 03/02/15
> [ 0.320519] NET: Registered protocol family 16
> [ 0.325164] cpuidle: using governor menu
> [ 0.329232] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.336928] ACPI: bus type PCI registered
> [ 0.341009] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.347583] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.357020] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> [ 0.363940] PCI: Using configuration type 1 for base access
> [ 0.373883] ACPI: Added _OSI(Module Device)
> [ 0.378142] ACPI: Added _OSI(Processor Device)
> [ 0.382660] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.387433] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.395906] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.404674] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 0.413883] ACPI: Dynamic OEM Table Load:
> [ 0.418032] ACPI: SSDT 0xFFFF88040E817000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
> [ 0.429694] ACPI: Dynamic OEM Table Load:
> [ 0.433839] ACPI: SSDT 0xFFFF880408D36800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
> [ 0.445410] ACPI: Dynamic OEM Table Load:
> [ 0.449554] ACPI: SSDT 0xFFFF880408836C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
> [ 0.461339] ACPI: Interpreter enabled
> [ 0.465079] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
> [ 0.474496] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
> [ 0.483915] ACPI: (supports S0 S3 S4 S5)
> [ 0.487912] ACPI: Using IOAPIC for interrupt routing
> [ 0.492969] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.508481] ACPI: Power Resource [FN00] (off)
> [ 0.512967] ACPI: Power Resource [FN01] (off)
> [ 0.517449] ACPI: Power Resource [FN02] (off)
> [ 0.521926] ACPI: Power Resource [FN03] (off)
> [ 0.526404] ACPI: Power Resource [FN04] (off)
> [ 0.531407] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> [ 0.537665] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 0.546130] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
> [ 0.553573] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
> [ 0.560641] PCI host bridge to bus 0000:00
> [ 0.564812] pci_bus 0000:00: root bus resource [bus 00-3e]
> [ 0.570374] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.576630] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.582886] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.589838] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
> [ 0.596789] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
> [ 0.603738] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
> [ 0.610690] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
> [ 0.617638] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
> [ 0.624590] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
> [ 0.631539] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
> [ 0.638495] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
> [ 0.638562] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
> [ 0.638572] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
> [ 0.638578] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
> [ 0.638582] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
> [ 0.638644] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
> [ 0.638651] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
> [ 0.638732] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
> [ 0.638749] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
> [ 0.638802] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.638830] pci 0000:00:14.0: System wakeup disabled by ACPI
> [ 0.644592] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
> [ 0.644609] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
> [ 0.644666] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 0.644730] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
> [ 0.644748] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
> [ 0.644829] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 0.644868] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.650632] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
> [ 0.650646] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
> [ 0.650709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.650738] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.656494] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
> [ 0.656555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.656585] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.662342] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
> [ 0.662402] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.662432] pci 0000:00:1c.2: System wakeup disabled by ACPI
> [ 0.668191] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
> [ 0.668252] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 0.668283] pci 0000:00:1c.3: System wakeup disabled by ACPI
> [ 0.674047] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
> [ 0.674065] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
> [ 0.674146] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.674184] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.679952] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
> [ 0.680094] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
> [ 0.680107] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
> [ 0.680113] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
> [ 0.680119] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
> [ 0.680126] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
> [ 0.680132] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
> [ 0.680138] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
> [ 0.680170] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.680220] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
> [ 0.680233] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
> [ 0.680251] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
> [ 0.680356] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.685468] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
> [ 0.685486] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
> [ 0.685514] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
> [ 0.685531] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
> [ 0.685618] pci 0000:02:00.0: supports D1 D2
> [ 0.685619] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.685648] pci 0000:02:00.0: System wakeup disabled by ACPI
> [ 0.693420] pci 0000:00:1c.2: PCI bridge to [bus 02]
> [ 0.698456] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
> [ 0.698459] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
> [ 0.698463] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
> [ 0.698537] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
> [ 0.698665] pci 0000:03:00.0: supports D1 D2
> [ 0.698666] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.698687] pci 0000:03:00.0: System wakeup disabled by ACPI
> [ 0.704440] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
> [ 0.709737] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
> [ 0.709740] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
> [ 0.709812] pci 0000:04:00.0: [1106:3249] type 00 class 0x010400
> [ 0.709843] pci 0000:04:00.0: reg 0x10: [io 0xd150-0xd15f]
> [ 0.709859] pci 0000:04:00.0: reg 0x14: [io 0xd140-0xd14f]
> [ 0.709876] pci 0000:04:00.0: reg 0x18: [io 0xd130-0xd13f]
> [ 0.709893] pci 0000:04:00.0: reg 0x1c: [io 0xd120-0xd12f]
> [ 0.709909] pci 0000:04:00.0: reg 0x20: [io 0xd100-0xd11f]
> [ 0.709926] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd0ff]
> [ 0.709943] pci 0000:04:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref]
> [ 0.710087] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
> [ 0.716956] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
> [ 0.716961] pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
> [ 0.716970] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
> [ 0.716971] pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
> [ 0.716996] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
> [ 0.724930] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.732282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
> [ 0.740877] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.748219] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 0.755569] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
> [ 0.764168] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
> [ 0.772758] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
> [ 0.780107] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 0.787639] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 0.792656] vgaarb: setting as boot device: PCI:0000:00:02.0
> [ 0.798388] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.806609] vgaarb: loaded
> [ 0.809387] vgaarb: bridge control possible 0000:00:02.0
> [ 0.814831] SCSI subsystem initialized
> [ 0.818689] libata version 3.00 loaded.
> [ 0.818714] ACPI: bus type USB registered
> [ 0.822811] usbcore: registered new interface driver usbfs
> [ 0.828373] usbcore: registered new interface driver hub
> [ 0.833773] usbcore: registered new device driver usb
> [ 0.838958] PCI: Using ACPI for IRQ routing
> [ 0.844470] PCI: pci_cache_line_size set to 64 bytes
> [ 0.844512] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
> [ 0.844513] e820: reserve RAM buffer [mem 0xc67f2000-0xc7ffffff]
> [ 0.844514] e820: reserve RAM buffer [mem 0xc72a9000-0xc7ffffff]
> [ 0.844515] e820: reserve RAM buffer [mem 0xd95e1000-0xdbffffff]
> [ 0.844516] e820: reserve RAM buffer [mem 0xd96bc000-0xdbffffff]
> [ 0.844517] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
> [ 0.844518] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
> [ 0.844605] NetLabel: Initializing
> [ 0.848080] NetLabel: domain hash size = 128
> [ 0.852504] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.857546] NetLabel: unlabeled traffic allowed by default
> [ 0.863253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 0.869816] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 0.877741] Switched to clocksource hpet
> [ 0.886756] pnp: PnP ACPI init
> [ 0.889968] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
> [ 0.896662] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.896801] system 00:01: [io 0x0680-0x069f] has been reserved
> [ 0.902795] system 00:01: [io 0xffff] has been reserved
> [ 0.908182] system 00:01: [io 0xffff] has been reserved
> [ 0.913569] system 00:01: [io 0xffff] has been reserved
> [ 0.918958] system 00:01: [io 0x1c00-0x1cfe] has been reserved
> [ 0.924954] system 00:01: [io 0x1d00-0x1dfe] has been reserved
> [ 0.930951] system 00:01: [io 0x1e00-0x1efe] has been reserved
> [ 0.936948] system 00:01: [io 0x1f00-0x1ffe] has been reserved
> [ 0.942942] system 00:01: [io 0x1800-0x18fe] could not be reserved
> [ 0.949286] system 00:01: [io 0x164e-0x164f] has been reserved
> [ 0.955283] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.955308] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.955343] system 00:03: [io 0x1854-0x1857] has been reserved
> [ 0.961342] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
> [ 0.961434] system 00:04: [io 0x0a00-0x0a0f] has been reserved
> [ 0.967431] system 00:04: [io 0x0a30-0x0a3f] has been reserved
> [ 0.973427] system 00:04: [io 0x0a20-0x0a2f] has been reserved
> [ 0.979421] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.979451] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> [ 0.979485] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
> [ 0.979649] pnp 00:07: [dma 0 disabled]
> [ 0.979679] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.979880] pnp 00:08: [dma 0 disabled]
> [ 0.979954] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
> [ 0.979989] system 00:09: [io 0x04d0-0x04d1] has been reserved
> [ 0.985991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.986284] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.992979] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 0.999668] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 1.006355] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 1.013046] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 1.019737] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 1.026427] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
> [ 1.033117] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
> [ 1.039807] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
> [ 1.046495] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
> [ 1.053532] system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved
> [ 1.060222] system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
> [ 1.066913] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.067074] pnp: PnP ACPI: found 11 devices
> [ 1.077249] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 1.082294] pci 0000:00:1c.2: PCI bridge to [bus 02]
> [ 1.087336] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
> [ 1.093512] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
> [ 1.100381] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
> [ 1.108253] pci 0000:03:00.0: PCI bridge to [bus 04]
> [ 1.113291] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
> [ 1.119466] pci 0000:03:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
> [ 1.126346] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
> [ 1.131649] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
> [ 1.137823] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
> [ 1.144692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 1.144693] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 1.144694] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 1.144695] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
> [ 1.144696] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
> [ 1.144698] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
> [ 1.144699] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
> [ 1.144700] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
> [ 1.144701] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
> [ 1.144702] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
> [ 1.144704] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
> [ 1.144705] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
> [ 1.144706] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
> [ 1.144708] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
> [ 1.144709] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
> [ 1.144710] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
> [ 1.144711] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
> [ 1.144712] pci_bus 0000:04: resource 4 [io 0xd000-0xdfff]
> [ 1.144713] pci_bus 0000:04: resource 5 [mem 0xf7c00000-0xf7cfffff]
> [ 1.144737] NET: Registered protocol family 2
> [ 1.149352] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 1.157051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 1.163935] TCP: Hash tables configured (established 131072 bind 65536)
> [ 1.170643] TCP: reno registered
> [ 1.173962] UDP hash table entries: 8192 (order: 6, 262144 bytes)
> [ 1.180171] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
> [ 1.186844] NET: Registered protocol family 1
> [ 1.191289] pci 0000:00:02.0: Video device with shadowed ROM
> [ 1.223231] PCI: CLS 64 bytes, default 64
> [ 1.223271] Unpacking initramfs...
> [ 1.452717] Freeing initrd memory: 20096K (ffff8800358b1000 - ffff880036c51000)
> [ 1.460172] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 1.466695] software IO TLB [mem 0xd55e1000-0xd95e1000] (64MB) mapped at [ffff8800d55e1000-ffff8800d95e0fff]
> [ 1.478293] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
> [ 1.488971] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x12
> [ 1.494886] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x12
> [ 1.500831] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 1.510097] futex hash table entries: 512 (order: 3, 32768 bytes)
> [ 1.516282] Initialise system trusted keyring
> [ 1.520730] audit: initializing netlink subsys (disabled)
> [ 1.526214] audit: type=2000 audit(1425312563.006:1): initialized
> [ 1.532659] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.540107] zpool: loaded
> [ 1.542800] zbud: loaded
> [ 1.545548] VFS: Disk quotas dquot_6.5.2
> [ 1.549573] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.556337] msgmni has been set to 31850
> [ 1.560379] Key type big_key registered
> [ 1.564286] SELinux: Registering netfilter hooks
> [ 1.564901] alg: No test for stdrng (krng)
> [ 1.569083] NET: Registered protocol family 38
> [ 1.573611] Key type asymmetric registered
> [ 1.577780] Asymmetric key parser 'x509' registered
> [ 1.582763] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 1.590310] io scheduler noop registered
> [ 1.594311] io scheduler deadline registered
> [ 1.598681] io scheduler cfq registered (default)
> [ 1.603806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.609464] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 1.616190] intel_idle: MWAIT substates: 0x2120
> [ 1.616191] intel_idle: v0.4 model 0x3C
> [ 1.616192] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 1.616302] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 1.624784] ACPI: Power Button [PWRB]
> [ 1.628546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 1.636067] ACPI: Power Button [PWRF]
> [ 1.639844] ACPI: Fan [FAN0] (off)
> [ 1.643333] ACPI: Fan [FAN1] (off)
> [ 1.646829] ACPI: Fan [FAN2] (off)
> [ 1.650327] ACPI: Fan [FAN3] (off)
> [ 1.653822] ACPI: Fan [FAN4] (off)
> [ 1.657573] thermal LNXTHERM:00: registered as thermal_zone0
> [ 1.663313] ACPI: Thermal Zone [TZ00] (28 C)
> [ 1.667791] thermal LNXTHERM:01: registered as thermal_zone1
> [ 1.673524] ACPI: Thermal Zone [TZ01] (30 C)
> [ 1.677889] GHES: HEST is not enabled!
> [ 1.681779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.708677] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [ 1.716570] Non-volatile memory driver v1.3
> [ 1.720834] Linux agpgart interface v0.103
> [ 1.725101] ahci 0000:00:1f.2: version 3.0
> [ 1.725173] ahci 0000:00:1f.2: irq 24 for MSI/MSI-X
> [ 1.725205] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
> [ 1.733513] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
> [ 1.742154] scsi host0: ahci
> [ 1.745228] scsi host1: ahci
> [ 1.748251] scsi host2: ahci
> [ 1.751282] scsi host3: ahci
> [ 1.754302] scsi host4: ahci
> [ 1.757294] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 24
> [ 1.764818] ata2: DUMMY
> [ 1.767333] ata3: DUMMY
> [ 1.769849] ata4: DUMMY
> [ 1.772368] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 24
> [ 1.779975] libphy: Fixed MDIO Bus: probed
> [ 1.784193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.790797] ehci-pci: EHCI PCI platform driver
> [ 1.795390] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 1.800741] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
> [ 1.808271] ehci-pci 0000:00:1a.0: debug port 2
> [ 1.816769] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 1.816779] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
> [ 1.827886] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 1.833737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.840603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.847951] usb usb1: Product: EHCI Host Controller
> [ 1.852903] usb usb1: Manufacturer: Linux 3.17.7-300.fc21.x86_64 ehci_hcd
> [ 1.859771] usb usb1: SerialNumber: 0000:00:1a.0
> [ 1.864563] hub 1-0:1.0: USB hub found
> [ 1.868395] hub 1-0:1.0: 2 ports detected
> [ 1.872624] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 1.877979] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [ 1.885515] ehci-pci 0000:00:1d.0: debug port 2
> [ 1.894009] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 1.894019] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
> [ 1.904977] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 1.910818] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.917680] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.925030] usb usb2: Product: EHCI Host Controller
> [ 1.929982] usb usb2: Manufacturer: Linux 3.17.7-300.fc21.x86_64 ehci_hcd
> [ 1.936847] usb usb2: SerialNumber: 0000:00:1d.0
> [ 1.941626] hub 2-0:1.0: USB hub found
> [ 1.945455] hub 2-0:1.0: 2 ports detected
> [ 1.949618] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.955880] ohci-pci: OHCI PCI platform driver
> [ 1.960407] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.966908] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 1.972266] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
> [ 1.979862] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [ 1.979875] xhci_hcd 0000:00:14.0: irq 25 for MSI/MSI-X
> [ 1.979916] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.986785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.994133] usb usb3: Product: xHCI Host Controller
> [ 1.999084] usb usb3: Manufacturer: Linux 3.17.7-300.fc21.x86_64 xhci_hcd
> [ 2.005953] usb usb3: SerialNumber: 0000:00:14.0
> [ 2.010742] hub 3-0:1.0: USB hub found
> [ 2.014580] hub 3-0:1.0: 10 ports detected
> [ 2.020431] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 2.025872] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
> [ 2.033456] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
> [ 2.040323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.047670] usb usb4: Product: xHCI Host Controller
> [ 2.052623] usb usb4: Manufacturer: Linux 3.17.7-300.fc21.x86_64 xhci_hcd
> [ 2.059489] usb usb4: SerialNumber: 0000:00:14.0
> [ 2.064273] hub 4-0:1.0: USB hub found
> [ 2.068105] hub 4-0:1.0: 2 ports detected
> [ 2.072510] usbcore: registered new interface driver usbserial
> [ 2.078429] usbcore: registered new interface driver usbserial_generic
> [ 2.084230] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 2.084250] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 2.085322] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
> [ 2.085324] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 2.085841] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
> [ 2.085842] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> [ 2.085843] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
> [ 2.086656] ata1.00: configured for UDMA/133
> [ 2.086713] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
> [ 2.086838] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 2.086886] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 2.086913] sd 0:0:0:0: [sda] Write Protect is off
> [ 2.086914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 2.086925] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 2.087002] ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max UDMA/100
> [ 2.088894] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
> [ 2.088895] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
> [ 2.088896] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
> [ 2.090073] ata5.00: configured for UDMA/100
> [ 2.091526] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.00 PQ: 0 ANSI: 5
> [ 2.104945] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 2.104945] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 2.105009] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 2.105046] sr 4:0:0:0: Attached scsi generic sg1 type 5
> [ 2.108617] sda: sda1 sda2
> [ 2.108751] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 2.177330] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 2.236176] usbserial: USB Serial support registered for generic
> [ 2.242298] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> [ 2.251010] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 2.256051] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 2.261255] mousedev: PS/2 mouse device common for all mice
> [ 2.267395] rtc_cmos 00:02: RTC can wake from S4
> [ 2.272296] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [ 2.278505] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> [ 2.286368] device-mapper: uevent: version 1.0.3
> [ 2.291172] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
> [ 2.299787] Intel P-state driver initializing.
> [ 2.304549] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
> [ 2.305295] hidraw: raw HID events driver (C) Jiri Kosina
> [ 2.305601] usbcore: registered new interface driver usbhid
> [ 2.305602] usbhid: USB HID core driver
> [ 2.305672] drop_monitor: Initializing network drop monitor service
> [ 2.305839] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 2.311413] TCP: cubic registered
> [ 2.311425] Initializing XFRM netlink socket
> [ 2.311696] NET: Registered protocol family 10
> [ 2.312118] mip6: Mobile IPv6
> [ 2.312125] NET: Registered protocol family 17
> [ 2.312794] Loading compiled-in X.509 certificates
> [ 2.314999] Loaded X.509 cert 'Fedora kernel signing key: a3deaae72f85c63029d7879041c633438a40e688'
> [ 2.315030] registered taskstats version 1
> [ 2.315915] Magic number: 7:443:185
> [ 2.315966] thermal LNXTHERM:01: hash matches
> [ 2.315982] acpi device:44: hash matches
> [ 2.316930] rtc_cmos 00:02: setting system clock to 2015-03-02 16:09:25 UTC (1425312565)
> [ 2.317108] PM: Hibernation image not present or could not be loaded.
> [ 2.398918] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 2.399188] hub 1-1:1.0: USB hub found
> [ 2.399272] hub 1-1:1.0: 4 ports detected
> [ 2.415360] Freeing unused kernel memory: 1468K (ffffffff81d33000 - ffffffff81ea2000)
> [ 2.423752] Write protecting the kernel read-only data: 12288k
> [ 2.431188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> [ 2.441459] Freeing unused kernel memory: 708K (ffff88000174f000 - ffff880001800000)
> [ 2.451354] Freeing unused kernel memory: 840K (ffff880001b2e000 - ffff880001c00000)
> [ 2.465113] random: systemd urandom read with 14 bits of entropy available
> [ 2.472715] systemd[1]: systemd 217 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN )
> [ 2.479690] tsc: Refined TSC clocksource calibration: 2793.530 MHz
> [ 2.497421] systemd[1]: Detected architecture 'x86-64'.
> [ 2.502780] systemd[1]: Running in initial RAM disk.
> [ 2.516819] systemd[1]: Set hostname to <pc.interlinx.bc.ca>.
> [ 2.549691] systemd[1]: Expecting device dev-mapper-rootvol\x2dswap.device...
> [ 2.556940] usb 3-2: new high-speed USB device number 2 using xhci_hcd
> [ 2.569841] systemd[1]: Expecting device dev-mapper-rootvol\x2dfedora_usr.device...
> [ 2.584852] systemd[1]: Expecting device dev-mapper-rootvol\x2dfedora_root.device...
> [ 2.599873] systemd[1]: Starting Timers.
> [ 2.607882] systemd[1]: Reached target Timers.
> [ 2.612424] systemd[1]: Starting -.slice.
> [ 2.623874] systemd[1]: Created slice -.slice.
> [ 2.628425] systemd[1]: Starting udev Control Socket.
> [ 2.638925] systemd[1]: Listening on udev Control Socket.
> [ 2.644424] systemd[1]: Starting udev Kernel Socket.
> [ 2.654942] systemd[1]: Listening on udev Kernel Socket.
> [ 2.660350] systemd[1]: Starting Journal Socket.
> [ 2.669960] systemd[1]: Listening on Journal Socket.
> [ 2.675028] systemd[1]: Starting System Slice.
> [ 2.683980] systemd[1]: Created slice System Slice.
> [ 2.688980] systemd[1]: Started dracut ask for additional cmdline parameters.
> [ 2.696201] systemd[1]: Starting system-systemd\x2dfsck.slice.
> [ 2.708017] systemd[1]: Created slice system-systemd\x2dfsck.slice.
> [ 2.714445] systemd[1]: Starting dracut cmdline hook...
> [ 2.724360] systemd[1]: Started Load Kernel Modules.
> [ 2.729432] systemd[1]: Starting Apply Kernel Variables...
> [ 2.739644] systemd[1]: Starting Journal Socket (/dev/log).
> [ 2.745626] systemd[1]: Starting Slices.
> [ 2.754062] systemd[1]: Reached target Slices.
> [ 2.758635] systemd[1]: Starting Setup Virtual Console...
> [ 2.770572] systemd[1]: Starting Create list of required static device nodes for the current kernel...
> [ 2.790404] systemd[1]: Starting Swap.
> [ 2.799093] systemd[1]: Reached target Swap.
> [ 2.806084] systemd[1]: Starting Local File Systems.
> [ 2.821120] systemd[1]: Reached target Local File Systems.
> [ 2.835140] systemd[1]: Started Apply Kernel Variables.
> [ 2.850160] systemd[1]: Listening on Journal Socket (/dev/log).
> [ 2.861204] systemd[1]: Started dracut cmdline hook.
> [ 2.872202] systemd[1]: Started Setup Virtual Console.
> [ 2.886210] systemd[1]: Started Create list of required static device nodes for the current kernel.
> [ 2.899583] systemd[1]: Starting Create Static Device Nodes in /dev...
> [ 2.906224] usb 3-2: New USB device found, idVendor=046d, idProduct=08c5
> [ 2.913084] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 2.926672] systemd[1]: Starting dracut pre-udev hook...
> [ 2.936572] systemd[1]: Starting Sockets.
> [ 2.945287] systemd[1]: Reached target Sockets.
> [ 2.949942] systemd[1]: Starting Journal Service...
> [ 2.963714] systemd-journald[253]: File /var/log/journal/b973333923f0c005e38d0e0563ae700a/system.journal corrupted or uncleanly shut down, renaming and replacing.
> [ 2.982330] systemd[1]: Started Create Static Device Nodes in /dev.
> [ 2.993907] systemd[1]: Started dracut pre-udev hook.
> [ 3.004369] systemd[1]: Started Journal Service.
> [ 3.030361] usb 3-3: new full-speed USB device number 3 using xhci_hcd
> [ 3.092083] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 3.103283] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
> [ 3.111179] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
> [ 3.111347] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90005b86000, fc:aa:14:6c:51:ab, XID 0c900800 IRQ 26
> [ 3.122098] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [ 3.129138] r8169 0000:02:00.0 p4p1: renamed from eth0
> [ 3.204471] usb 3-3: New USB device found, idVendor=0a5c, idProduct=2121
> [ 3.211281] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.211320] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input4
> [ 3.226826] usb 3-3: Product: BCM92045B3 ROM
> [ 3.231174] usb 3-3: Manufacturer: Broadcom Corp
> [ 3.388811] usb 3-4: new full-speed USB device number 4 using xhci_hcd
> [ 3.481057] Switched to clocksource tsc
> [ 3.561179] usb 3-4: New USB device found, idVendor=04f9, idProduct=01e9
> [ 3.567960] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=3
> [ 3.575171] usb 3-4: SerialNumber: 000H8N427165
> [ 3.733233] usb 3-5: new low-speed USB device number 5 using xhci_hcd
> [ 3.909826] usb 3-5: New USB device found, idVendor=047d, idProduct=1024
> [ 3.916645] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.923877] usb 3-5: Product: Kensington USB Mouse
> [ 3.928758] usb 3-5: Manufacturer: Kensington
> [ 3.933306] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
> [ 3.944816] input: Kensington Kensington USB Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:047D:1024.0001/input/input5
> [ 3.957366] hid-generic 0003:047D:1024.0001: input,hidraw0: USB HID v1.00 Mouse [Kensington Kensington USB Mouse] on usb-0000:00:14.0-5/input0
> [ 4.067956] random: nonblocking pool is initialized
> [ 4.071588] usb 2-1: new high-speed USB device number 2 using ehci-pci
> [ 4.194026] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
> [ 4.200860] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 4.208685] hub 2-1:1.0: USB hub found
> [ 4.212912] hub 2-1:1.0: 6 ports detected
> [ 39.414405] PM: Starting manual resume from disk
> [ 39.420065] PM: Hibernation image partition 253:0 present
> [ 39.420066] PM: Looking for hibernation image.
> [ 39.444024] PM: Image not found (code -22)
> [ 39.444026] PM: Hibernation image not present or could not be loaded.
> [ 39.563648] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
> [ 39.824228] EXT4-fs (dm-7): mounting with "discard" option, but the device does not support discard
> [ 39.833465] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> [ 40.059767] systemd-journald[253]: Received SIGTERM from PID 1 (systemd).
> [ 40.813521] audit: type=1404 audit(1425312603.950:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> [ 40.968581] SELinux: 2048 avtab hash slots, 104708 rules.
> [ 40.981972] SELinux: 2048 avtab hash slots, 104708 rules.
> [ 41.009288] SELinux: 8 users, 103 roles, 4987 types, 295 bools, 1 sens, 1024 cats
> [ 41.009291] SELinux: 83 classes, 104708 rules
> [ 41.012645] SELinux: Permission audit_read in class capability2 not defined in policy.
> [ 41.020839] SELinux: the above unknown classes and permissions will be allowed
> [ 41.028244] SELinux: Completing initialization.
> [ 41.028245] SELinux: Setting up existing superblocks.
> [ 41.028252] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> [ 41.028258] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> [ 41.028263] SELinux: initialized (dev proc, type proc), uses genfs_contexts
> [ 41.028301] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 41.028312] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
> [ 41.028748] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> [ 41.029324] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> [ 41.029326] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> [ 41.029329] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> [ 41.029330] SELinux: initialized (dev aio, type aio), not configured for labeling
> [ 41.029332] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> [ 41.029345] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> [ 41.029349] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> [ 41.029356] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> [ 41.029363] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> [ 41.029646] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> [ 41.029648] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 41.029655] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 41.029724] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 41.029750] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029753] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
> [ 41.029754] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029756] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029757] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029762] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029765] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029766] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029768] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029772] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029773] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> [ 41.029775] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
> [ 41.063708] SELinux: initialized (dev dm-2, type ext4), uses xattr
> [ 41.111668] SELinux: initialized (dev dm-7, type ext4), uses xattr
> [ 41.115026] audit: type=1403 audit(1425312604.251:3): policy loaded auid=4294967295 ses=4294967295
> [ 41.167274] systemd[1]: Successfully loaded SELinux policy in 403.760ms.
> [ 41.303146] systemd[1]: Relabelled /dev and /run in 16.551ms.
> [ 41.658705] systemd-sysv-generator[584]: Could not find init script for ebtables.service
> [ 41.666983] ttyS0: 7 input overrun(s)
> [ 41.670802] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
> [ 41.679305] systemd-sysv-generator[584]: Could not find init script for ebtables.service
> [ 41.687718] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
> [ 41.696065] systemd-sysv-generator[584]: Could not find init script for ebtables.service
> [ 41.704467] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
> [ 41.712911] systemd-sysv-generator[584]: Could not find init script for ebtables.service
> [ 41.721244] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
> [ 41.733086] systemd-sysv-generator[584]: Could not find init script for ebtables.service
> [ 41.741371] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
> [ 41.750368] systemd-sysv-generator[584]: Could not find init script for ebtables.service
> [ 41.758790] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
> [ 41.767134] systemd-sysv-generator[584]: Could not find init script for ebtables.service
> [ 41.775461] systemd-sysv-generator[584]: Could not find init script for SABnzbd.service
> [ 44.219933] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 45.458222] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> [ 45.466418] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 45.877219] EXT4-fs (dm-7): re-mounted. Opts: discard,errors=remount-ro
> [ 45.884206] EXT4-fs (dm-2): re-mounted. Opts: discard,errors=remount-ro
> [ 47.784048] RPC: Registered named UNIX socket transport module.
> [ 47.790109] RPC: Registered udp transport module.
> [ 47.794956] RPC: Registered tcp transport module.
> [ 47.799788] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 47.908493] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 47.915399] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
> [ 49.409784] parport_pc 00:08: reported by Plug and Play ACPI
> [ 49.419758] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
> [ 49.527948] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
> [ 49.598274] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 49.683964] [drm] Initialized drm 1.1.0 20060810
> [ 49.790622] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
> [ 49.798422] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
> [ 49.815627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 49.854558] sata_via 0000:04:00.0: version 2.6
> [ 49.854664] sata_via 0000:04:00.0: routed to hard irq line 10
> [ 49.871945] scsi host5: sata_via
> [ 49.887083] scsi host6: sata_via
> [ 49.895319] scsi host7: sata_via
> [ 49.898727] ata6: SATA max UDMA/133 port i16@0xd150 bmdma 0xd100 irq 19
> [ 49.905488] ata7: SATA max UDMA/133 port i16@0xd140 bmdma 0xd108 irq 19
> [ 49.912243] ata8: PATA max UDMA/133 port i16@0xd130 bmdma 0xd110 irq 19
> [ 50.235964] ata6: SATA link down (SStatus 0 SControl 310)
> [ 50.350148] alg: No test for crc32 (crc32-pclmul)
> [ 50.378436] SELinux: initialized (dev drm, type drm), not configured for labeling
> [ 50.382570] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0402 rev=0x06 flags=need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
> [ 50.382590] [drm:intel_detect_pch] Found LynxPoint PCH
> [ 50.382621] [drm] Memory usable by graphics device = 2048M
> [ 50.388245] [drm:i915_gem_gtt_init] GMADR size = 256M
> [ 50.388246] [drm:i915_gem_gtt_init] GTT stolen size = 64M
> [ 50.388247] [drm:i915_gem_gtt_init] ppgtt mode: 1
> [ 50.388435] [drm] Replacing VGA console driver
> [ 50.395133] Console: switching to colour dummy device 80x25
> [ 50.416540] [drm:intel_opregion_setup] graphic opregion physical addr: 0xd9760018
> [ 50.416553] [drm:intel_opregion_setup] Public ACPI methods supported
> [ 50.416554] [drm:intel_opregion_setup] SWSCI supported
> [ 50.421990] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
> [ 50.421993] [drm:intel_opregion_setup] ASLE supported
> [ 50.422065] i915 0000:00:02.0: irq 28 for MSI/MSI-X
> [ 50.422072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 50.428753] [drm] Driver supports precise vblank timestamp query.
> [ 50.434920] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
> [ 50.434921] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d
> [ 50.434923] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
> [ 50.434924] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
> [ 50.434926] [drm:parse_lfp_panel_data] DRRS supported mode is static
> [ 50.436381] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
> [ 50.436385] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> [ 50.436386] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
> [ 50.436389] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
> [ 50.436390] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
> [ 50.436392] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
> [ 50.436393] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
> [ 50.436394] [drm:parse_driver_features] DRRS State Enabled:1
> [ 50.436396] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
> [ 50.436397] [drm:parse_ddi_port] VBT HDMI level shift for port B: 6
> [ 50.436406] [drm:intel_dsm_pci_probe] no _DSM method for intel device
> [ 50.436412] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at dba00000
> [ 50.436414] [drm:intel_display_power_get] enabling always-on
> [ 50.436415] [drm:intel_display_power_get] enabling display
> [ 50.436418] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 50.455967] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
> [ 50.455970] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
> [ 50.455971] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
> [ 50.455972] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
> [ 50.455973] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
> [ 50.455974] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
> [ 50.455975] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
> [ 50.455976] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
> [ 50.455977] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
> [ 50.455978] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
> [ 50.455979] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
> [ 50.455980] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
> [ 50.455981] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
> [ 50.455981] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
> [ 50.455982] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
> [ 50.455985] [drm:intel_modeset_init] 3 display pipes available.
> [ 50.455995] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
> [ 50.467441] [drm:intel_crt_reset] pch crt adpa set to 0x80f40010
> [ 50.467669] [drm:intel_modeset_readout_hw_state] [CRTC:7] hw state readout: enabled
> [ 50.467671] [drm:intel_modeset_readout_hw_state] [CRTC:11] hw state readout: disabled
> [ 50.467673] [drm:intel_modeset_readout_hw_state] [CRTC:15] hw state readout: disabled
> [ 50.467675] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
> [ 50.467676] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
> [ 50.467679] [drm:intel_modeset_readout_hw_state] [ENCODER:18:DAC-18] hw state readout: enabled, pipe A
> [ 50.467681] [drm:intel_modeset_readout_hw_state] [ENCODER:19:TMDS-19] hw state readout: disabled, pipe A
> [ 50.467682] [drm:intel_modeset_readout_hw_state] [CONNECTOR:17:VGA-1] hw state readout: enabled
> [ 50.467684] [drm:intel_modeset_readout_hw_state] [CONNECTOR:20:HDMI-A-1] hw state readout: disabled
> [ 50.467686] [drm:intel_dump_pipe_config] [CRTC:7][setup_hw_state] config for pipe A
> [ 50.467687] [drm:intel_dump_pipe_config] cpu_transcoder: A
> [ 50.467688] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 50.467690] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2639615, gmch_n: 8388608, link_m: 54991, link_n: 524288, tu: 64
> [ 50.467691] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.467692] [drm:intel_dump_pipe_config] requested mode:
> [ 50.467694] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
> [ 50.467695] [drm:intel_dump_pipe_config] adjusted mode:
> [ 50.467696] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
> [ 50.467698] [drm:intel_dump_crtc_timings] crtc timings: 28319 720 738 846 900 400 413 415 449, type: 0x0 flags: 0x6
> [ 50.467699] [drm:intel_dump_pipe_config] port clock: 270000
> [ 50.467700] [drm:intel_dump_pipe_config] pipe src size: 720x400
> [ 50.467701] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 50.467702] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x02d00190, enabled
> [ 50.467703] [drm:intel_dump_pipe_config] ips: 0
> [ 50.467704] [drm:intel_dump_pipe_config] double wide: 0
> [ 50.467706] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
> [ 50.467707] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
> [ 50.467708] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
> [ 50.467710] [drm:intel_dump_pipe_config] [CRTC:11][setup_hw_state] config for pipe B
> [ 50.467711] [drm:intel_dump_pipe_config] cpu_transcoder: B
> [ 50.467711] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
> [ 50.467713] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.467714] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.467715] [drm:intel_dump_pipe_config] requested mode:
> [ 50.467716] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 50.467717] [drm:intel_dump_pipe_config] adjusted mode:
> [ 50.467719] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 50.467720] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
> [ 50.467721] [drm:intel_dump_pipe_config] port clock: 0
> [ 50.467722] [drm:intel_dump_pipe_config] pipe src size: 0x0
> [ 50.467723] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 50.467724] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 50.467725] [drm:intel_dump_pipe_config] ips: 0
> [ 50.467726] [drm:intel_dump_pipe_config] double wide: 0
> [ 50.467727] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
> [ 50.467728] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
> [ 50.467729] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
> [ 50.467731] [drm:intel_dump_pipe_config] [CRTC:15][setup_hw_state] config for pipe C
> [ 50.467731] [drm:intel_dump_pipe_config] cpu_transcoder: C
> [ 50.467732] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
> [ 50.467734] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.467735] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.467736] [drm:intel_dump_pipe_config] requested mode:
> [ 50.467737] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 50.467738] [drm:intel_dump_pipe_config] adjusted mode:
> [ 50.467740] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 50.467741] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
> [ 50.467742] [drm:intel_dump_pipe_config] port clock: 0
> [ 50.467743] [drm:intel_dump_pipe_config] pipe src size: 0x0
> [ 50.467744] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 50.467745] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 50.467746] [drm:intel_dump_pipe_config] ips: 0
> [ 50.467747] [drm:intel_dump_pipe_config] double wide: 0
> [ 50.467751] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 50.467753] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 50.467754] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 50.467755] [drm:check_crtc_state] [CRTC:7]
> [ 50.467762] [drm:check_crtc_state] [CRTC:11]
> [ 50.467764] [drm:check_crtc_state] [CRTC:15]
> [ 50.467765] [drm:check_shared_dpll_state] WRPLL 1
> [ 50.467766] [drm:check_shared_dpll_state] WRPLL 2
> [ 50.467770] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 5120, size 0x1f4000
> [ 50.467771] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1f4000
> [ 50.467775] [drm:i915_pages_create_for_stolen] offset=0x0, size=2048000
> [ 50.467778] [drm:intel_alloc_plane_obj] plane fb obj ffff880406a80000
> [ 50.467780] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 1f4000
> [ 50.467781] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [1f4000, 7ffff000]
> [ 50.475381] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
> [ 50.475386] [drm:i915_gem_context_init] HW context support initialized
> [ 50.475411] [drm:init_status_page] render ring hws offset: 0x7fff0000
> [ 50.477053] [drm:init_pipe_control] render ring pipe control offset: 0x00225000
> [ 50.477061] [drm:init_status_page] bsd ring hws offset: 0x00226000
> [ 50.477114] [drm:init_status_page] blitter ring hws offset: 0x00247000
> [ 50.477161] [drm:init_status_page] video enhancement ring hws offset: 0x00268000
> [ 50.477371] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1]
> [ 50.477372] [drm:intel_crt_detect] [CONNECTOR:17:VGA-1] force=1
> [ 50.477375] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010
> [ 50.493876] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
> [ 50.493879] [drm:intel_crt_detect] CRT detected via hotplug
> [ 50.508350] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> [ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> [ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 50.508395] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1] probed modes :
> [ 50.508397] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 50.508398] [drm:drm_mode_debug_printmodeline] Modeline 70:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 50.508400] [drm:drm_mode_debug_printmodeline] Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6
> [ 50.508401] [drm:drm_mode_debug_printmodeline] Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
> [ 50.508403] [drm:drm_mode_debug_printmodeline] Modeline 74:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
> [ 50.508405] [drm:drm_mode_debug_printmodeline] Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 50.508406] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 50.508408] [drm:drm_mode_debug_printmodeline] Modeline 69:"1440x900" 85 157000 1440 1544 1696 1952 900 903 909 948 0x40 0x6
> [ 50.508409] [drm:drm_mode_debug_printmodeline] Modeline 68:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
> [ 50.508410] [drm:drm_mode_debug_printmodeline] Modeline 67:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
> [ 50.508412] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x960" 85 148500 1280 1344 1504 1728 960 961 964 1011 0x40 0x5
> [ 50.508413] [drm:drm_mode_debug_printmodeline] Modeline 61:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
> [ 50.508415] [drm:drm_mode_debug_printmodeline] Modeline 73:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
> [ 50.508447] [drm:drm_mode_debug_printmodeline] Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
> [ 50.508448] [drm:drm_mode_debug_printmodeline] Modeline 60:"1280x800" 85 122500 1280 1360 1496 1712 800 803 809 843 0x40 0x6
> [ 50.508450] [drm:drm_mode_debug_printmodeline] Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
> [ 50.508451] [drm:drm_mode_debug_printmodeline] Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
> [ 50.508453] [drm:drm_mode_debug_printmodeline] Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 50.508454] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x768" 85 117500 1280 1360 1496 1712 768 771 778 809 0x40 0x6
> [ 50.508456] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
> [ 50.508457] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
> [ 50.508459] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768i" 86 44900 1024 1032 1208 1264 768 768 776 817 0x40 0x15
> [ 50.508460] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 50.508462] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 50.508463] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 50.508465] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 50.508466] [drm:drm_mode_debug_printmodeline] Modeline 72:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
> [ 50.508468] [drm:drm_mode_debug_printmodeline] Modeline 45:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 50.508469] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 50.508471] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 50.508472] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 50.508473] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 50.508475] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 50.508488] [drm:drm_mode_debug_printmodeline] Modeline 54:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
> [ 50.508489] [drm:drm_mode_debug_printmodeline] Modeline 52:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 50.508491] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 50.508492] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 50.508494] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 50.508495] [drm:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 50.508496] [drm:drm_mode_debug_printmodeline] Modeline 38:"720x400" 88 35500 720 738 846 900 400 421 423 449 0x40 0xa
> [ 50.508498] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x400" 85 35500 720 756 828 936 400 401 404 446 0x40 0x6
> [ 50.508499] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 50.508501] [drm:drm_mode_debug_printmodeline] Modeline 50:"640x400" 85 31500 640 672 736 832 400 401 404 445 0x40 0x6
> [ 50.508502] [drm:drm_mode_debug_printmodeline] Modeline 49:"640x350" 85 31500 640 672 736 832 350 382 385 445 0x40 0x9
> [ 50.508504] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
> [ 50.508506] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
> [ 50.543767] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 50.543778] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
> [ 50.543781] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 50.543783] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
> [ 50.543784] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 50.543786] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 50.543787] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
> [ 50.543789] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 50.543790] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 50.543792] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 50.543793] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 50.543795] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 50.543796] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 50.543798] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 50.543799] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 50.543801] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 50.543802] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 50.543804] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 50.543805] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 50.543807] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 50.543808] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 50.543809] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 50.543811] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 50.543812] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 50.543814] [drm:drm_setup_crtcs]
> [ 50.543815] [drm:drm_enable_connectors] connector 17 enabled? yes
> [ 50.543816] [drm:drm_enable_connectors] connector 20 enabled? yes
> [ 50.543818] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1
> [ 50.543849] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1
> [ 50.543851] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:7]: 1280x1024
> [ 50.543852] [drm:intel_fb_initial_config] connector HDMI-A-1 has no encoder or crtc, skipping
> [ 50.543852] [drm:intel_fb_initial_config] fallback: Not all outputs enabled
> [ 50.543853] [drm:intel_fb_initial_config] Enabled: 1, detected: 2
> [ 50.543854] [drm:intel_fb_initial_config] Not using firmware configuration
> [ 50.543855] [drm:drm_target_preferred] looking for cmdline mode on connector 17
> [ 50.543856] [drm:drm_target_preferred] looking for preferred mode on connector 17
> [ 50.543857] [drm:drm_target_preferred] found mode 1280x1024
> [ 50.543858] [drm:drm_target_preferred] looking for cmdline mode on connector 20
> [ 50.543859] [drm:drm_target_preferred] looking for preferred mode on connector 20
> [ 50.543859] [drm:drm_target_preferred] found mode 1600x1200
> [ 50.543860] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
> [ 50.543865] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 7
> [ 50.543866] [drm:drm_setup_crtcs] desired mode 1600x1200 set on crtc 11
> [ 50.543867] [drm:intelfb_create] no BIOS fb, allocating a new one
> [ 50.543869] [drm:i915_gem_object_create_stolen] creating stolen object: size=753000
> [ 50.543871] [drm:i915_pages_create_for_stolen] offset=0x1f4000, size=7680000
> [ 50.544410] [drm:intelfb_create] allocated 1600x1200 fb: 0x0028a000, bo ffff880406a81500
> [ 50.545280] fbcon: inteldrmfb (fb0) is primary device
> [ 50.545307] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 50.545308] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
> [ 50.545310] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 50.545311] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 50.545312] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
> [ 50.545313] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 50.545314] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> [ 50.545315] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
> [ 50.545316] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
> [ 50.545317] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 50.545318] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
> [ 50.545318] [drm:intel_dump_pipe_config] cpu_transcoder: A
> [ 50.545319] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 50.545320] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 7340032, gmch_n: 8388608, link_m: 305834, link_n: 524288, tu: 64
> [ 50.545321] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.545321] [drm:intel_dump_pipe_config] requested mode:
> [ 50.545322] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 50.545322] [drm:intel_dump_pipe_config] adjusted mode:
> [ 50.545324] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 50.545325] [drm:intel_dump_crtc_timings] crtc timings: 157500 1280 1344 1504 1728 1024 1025 1028 1072, type: 0x48 flags: 0x5
> [ 50.545325] [drm:intel_dump_pipe_config] port clock: 270000
> [ 50.545326] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
> [ 50.545326] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 50.545327] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 50.545327] [drm:intel_dump_pipe_config] ips: 0
> [ 50.545327] [drm:intel_dump_pipe_config] double wide: 0
> [ 50.560348] ata7: SATA link down (SStatus 0 SControl 310)
> [ 50.564151] [drm:hsw_crt_post_disable] Disabling SPLL
> [ 50.564154] [drm:intel_update_fbc] no output, disabling
> [ 50.564171] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
> [ 50.565707] [drm:hsw_fdi_link_train] FDI link training done on step 1
> [ 50.565787] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 157500KHz refresh rate: auxdiv=0, divsel=f, phasedir=0, phaseinc=9
> [ 50.565844] [drm:intel_update_fbc] disabled per chip default
> [ 50.565846] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 50.565847] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 50.565848] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 50.565849] [drm:check_crtc_state] [CRTC:7]
> [ 50.565856] [drm:check_crtc_state] [CRTC:11]
> [ 50.565857] [drm:check_crtc_state] [CRTC:15]
> [ 50.565858] [drm:check_shared_dpll_state] WRPLL 1
> [ 50.565890] [drm:check_shared_dpll_state] WRPLL 2
> [ 50.565892] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 50.565893] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
> [ 50.565894] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
> [ 50.565895] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
> [ 50.565897] [drm:drm_mode_debug_printmodeline] Modeline 94:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 50.565897] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
> [ 50.565898] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 50.565898] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 50.565899] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 50.565900] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 50.565900] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
> [ 50.565901] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 50.565902] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
> [ 50.565903] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
> [ 50.565903] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
> [ 50.565904] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 50.565905] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B
> [ 50.565905] [drm:intel_dump_pipe_config] cpu_transcoder: B
> [ 50.565905] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 50.565906] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.565907] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 50.565907] [drm:intel_dump_pipe_config] requested mode:
> [ 50.565908] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 50.565909] [drm:intel_dump_pipe_config] adjusted mode:
> [ 50.565910] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 50.565911] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x48 flags: 0x5
> [ 50.565911] [drm:intel_dump_pipe_config] port clock: 162000
> [ 50.565912] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
> [ 50.565912] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 50.565913] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 50.565913] [drm:intel_dump_pipe_config] ips: 0
> [ 50.565914] [drm:intel_dump_pipe_config] double wide: 0
> [ 50.566722] [drm:intel_get_shared_dpll] CRTC:11 allocated WRPLL 1
> [ 50.566723] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe B
> [ 50.566724] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 11
> [ 50.566726] [drm:intel_enable_shared_dpll] enabling WRPLL 1
> [ 50.566754] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
> [ 50.590195] [drm:intel_update_fbc] more than one pipe active, disabling compression
> [ 50.590200] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 50.590202] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 50.590203] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 50.590204] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 50.590205] [drm:check_crtc_state] [CRTC:7]
> [ 50.590212] [drm:check_crtc_state] [CRTC:11]
> [ 50.590217] [drm:check_crtc_state] [CRTC:15]
> [ 50.590218] [drm:check_shared_dpll_state] WRPLL 1
> [ 50.590218] [drm:check_shared_dpll_state] WRPLL 2
> [ 50.590221] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
> [ 50.590222] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
> [ 50.590223] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 50.590224] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 50.590229] Console: switching to colour frame buffer device 160x64
> [ 50.590236] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 50.590237] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
> [ 50.590238] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 50.590238] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 50.590239] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 50.590240] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 50.590240] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 50.590241] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 50.609664] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 50.615925] i915 0000:00:02.0: registered panic notifier
> [ 50.632230] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 50.639417] [drm:asle_set_backlight] bclp = 0x80000002
> [ 50.639419] [drm:asle_set_backlight] updating opregion backlight 2/255
> [ 50.639488] [drm:asle_set_backlight] bclp = 0x800000ff
> [ 50.639489] [drm:asle_set_backlight] updating opregion backlight 255/255
> [ 50.641651] acpi device:60: registered as cooling_device7
> [ 50.648377] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
> [ 50.659832] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
> [ 50.667243] snd_hda_intel 0000:00:1b.0: irq 29 for MSI/MSI-X
> [ 50.681300] usblp 3-4:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E9
> [ 50.699364] usbcore: registered new interface driver usblp
> [ 50.718263] ata8.00: ATA-6: SAMSUNG SV1204H, RK100-09, max UDMA/100
> [ 50.724618] ata8.00: 234493056 sectors, multi 0: LBA
> [ 50.729754] ata8.01: ATAPI: SONY CD-RW CRX215E5, 5.0D, max UDMA/33
> [ 50.741135] ata8.00: configured for UDMA/100
> [ 50.752029] ata8.01: configured for UDMA/33
> [ 50.759794] scsi 7:0:0:0: Direct-Access ATA SAMSUNG SV1204H 0-09 PQ: 0 ANSI: 5
> [ 50.770172] sd 7:0:0:0: [sdb] 234493056 512-byte logical blocks: (120 GB/111 GiB)
> [ 50.778533] sd 7:0:0:0: Attached scsi generic sg2 type 0
> [ 50.785799] sd 7:0:0:0: [sdb] Write Protect is off
> [ 50.790661] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 50.798522] scsi 7:0:1:0: CD-ROM SONY CD-RW CRX215E5 5.0D PQ: 0 ANSI: 5
> [ 50.806699] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 50.835322] sr 7:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
> [ 50.846215] sr 7:0:1:0: Attached scsi CD-ROM sr1
> [ 50.846283] sr 7:0:1:0: Attached scsi generic sg3 type 5
> [ 50.869278] sdb: sdb1 sdb2 sdb3
> [ 50.873281] sd 7:0:0:0: [sdb] Attached SCSI disk
> [ 50.894810] snd_hda_intel 0000:00:03.0: irq 30 for MSI/MSI-X
> [ 50.941925] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
> [ 50.956692] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
> [ 50.966728] sound hdaudioC1D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
> [ 50.974818] sound hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 50.981433] sound hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 50.987686] sound hdaudioC1D2: mono: mono_out=0x0
> [ 50.992729] sound hdaudioC1D2: inputs:
> [ 50.999664] sound hdaudioC1D2: Rear Mic=0x18
> [ 51.009676] sound hdaudioC1D2: Front Mic=0x19
> [ 51.015776] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
> [ 51.028698] sound hdaudioC1D2: Line=0x1a
> [ 51.037715] sound hdaudioC1D2: CD=0x1c
> [ 51.080032] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
> [ 51.095709] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
> [ 51.112505] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
> [ 51.126044] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
> [ 51.135816] Bluetooth: Core ver 2.19
> [ 51.143860] NET: Registered protocol family 31
> [ 51.149177] Bluetooth: HCI device and connection manager initialized
> [ 51.170273] Bluetooth: HCI socket layer initialized
> [ 51.196826] Bluetooth: L2CAP socket layer initialized
> [ 51.215218] Bluetooth: SCO socket layer initialized
> [ 51.258947] usbcore: registered new interface driver btusb
> [ 51.320179] usb 3-2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
> [ 51.329594] usb 3-2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
> [ 51.355695] usbcore: registered new interface driver snd-usb-audio
> [ 51.468659] ppdev: user-space parallel port driver
> [ 51.664409] iTCO_vendor_support: vendor-support=0
> [ 51.815148] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [ 51.821926] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
> [ 52.287263] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [ 52.287271] [drm:gen6_enable_rps] Overclocking supported. Max: 1050MHz, Overclock max: 1050MHz
> [ 52.309177] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 52.309178] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
> [ 52.309180] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 52.309181] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 52.309182] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 52.309183] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 52.309184] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 52.309184] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 52.928028] media: Linux media interface: v0.10
> [ 53.022828] Linux video capture interface: v2.00
> [ 53.275161] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c5)
> [ 53.304020] input: UVC Camera (046d:08c5) as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input14
> [ 53.316780] usbcore: registered new interface driver uvcvideo
> [ 53.323433] USB Video Class driver (1.1.1)
> [ 54.447378] Adding 4194300k swap on /dev/mapper/rootvol-swap. Priority:-1 extents:1 across:4194300k FS
> [ 55.350720] EXT4-fs (dm-9): mounting with "discard" option, but the device does not support discard
> [ 55.360679] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> [ 55.370991] SELinux: initialized (dev dm-9, type ext4), uses xattr
> [ 55.856393] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> [ 56.657717] systemd-journald[599]: Received request to flush runtime journal from PID 1
> [ 56.818629] [drm:asle_set_backlight] bclp = 0x800000ff
> [ 56.818633] [drm:asle_set_backlight] updating opregion backlight 255/255
> [ 59.026796] EXT4-fs (dm-15): warning: maximal mount count reached, running e2fsck is recommended
> [ 59.302641] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro
> [ 59.313236] SELinux: initialized (dev dm-15, type ext4), uses xattr
> [ 61.486200] raid6: sse2x1 8523 MB/s
> [ 61.507223] raid6: sse2x2 11000 MB/s
> [ 61.528246] raid6: sse2x4 12609 MB/s
> [ 61.532849] raid6: using algorithm sse2x4 (12609 MB/s)
> [ 61.538838] raid6: using ssse3x2 recovery algorithm
> [ 61.829469] xor: measuring software checksum speed
> [ 61.844623] prefetch64-sse: 18328.000 MB/sec
> [ 61.859641] generic_sse: 16524.000 MB/sec
> [ 61.864762] xor: using function: prefetch64-sse (18328.000 MB/sec)
> [ 62.065346] Btrfs loaded
> [ 62.356376] BTRFS: device fsid ff633c5b-7a7a-4ca0-b5ba-170424f09aa6 devid 1 transid 287682 /dev/dm-31
> [ 64.466746] EXT4-fs (dm-19): mounting ext3 file system using the ext4 subsystem
> [ 66.016165] EXT4-fs (dm-18): mounting ext3 file system using the ext4 subsystem
> [ 66.495316] EXT4-fs (dm-19): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro
> [ 66.698979] SELinux: initialized (dev dm-19, type ext3), uses xattr
> [ 66.870006] EXT4-fs (dm-42): mounting with "discard" option, but the device does not support discard
> [ 66.880067] EXT4-fs (dm-42): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro
> [ 66.893861] EXT4-fs (dm-18): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro
> [ 66.987473] SELinux: initialized (dev dm-42, type ext4), uses xattr
> [ 67.073892] SELinux: initialized (dev dm-18, type ext3), uses xattr
> [ 67.867925] EXT4-fs (dm-47): mounting with "discard" option, but the device does not support discard
> [ 67.878008] EXT4-fs (dm-47): mounted filesystem without journal. Opts: discard,errors=remount-ro
> [ 67.887737] SELinux: initialized (dev dm-47, type ext4), uses xattr
> [ 69.591517] audit: type=1305 audit(1425312632.693:4): audit_pid=1129 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
> [ 79.608811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 79.614787] Bluetooth: BNEP filters: protocol multicast
> [ 79.622294] Bluetooth: BNEP socket layer initialized
> [ 79.732282] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 82.306199] r8169 0000:02:00.0 p4p1: link down
> [ 82.311435] r8169 0000:02:00.0 p4p1: link down
> [ 82.317801] IPv6: ADDRCONF(NETDEV_UP): p4p1: link is not ready
> [ 84.209636] r8169 0000:02:00.0 p4p1: link up
> [ 84.214550] IPv6: ADDRCONF(NETDEV_CHANGE): p4p1: link becomes ready
> [ 89.799177] systemd[1]: Unit SABnzbd@multi-user.service entered failed state.
> [ 89.818130] systemd[1]: SABnzbd@multi-user.service failed.
> [ 90.094576] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 90.756371] systemd[1]: Received SIGRTMIN+21 from PID 281 (plymouthd).
> [ 90.805819] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 90.845091] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 91.041062] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 91.041155] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 91.045735] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 91.050514] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> [ 92.251528] [drm:i915_gem_open]
> [ 92.251627] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 92.251630] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
> [ 92.251631] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 92.251632] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 92.251634] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 92.251635] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 92.251636] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 92.251637] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 92.251638] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
> [ 92.251640] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
> [ 92.251641] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 92.251642] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 92.792150] [drm:i915_gem_open]
> [ 92.792215] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 92.826253] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 92.826288] [drm:drm_mode_addfb] [FB:96]
> [ 92.826670] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 92.826675] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 92.826859] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 92.826881] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 92.826889] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 92.827335] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 92.827339] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
> [ 92.827342] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
> [ 92.854981] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 92.855005] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
> [ 92.855009] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 92.855012] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
> [ 92.855014] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 92.855017] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 92.855020] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
> [ 92.855022] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 92.855025] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 92.855028] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 92.855030] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 92.855033] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 92.855035] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 92.855038] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 92.855040] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 92.855043] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 92.855046] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 92.855048] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 92.855051] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 92.855053] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 92.855056] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 92.855058] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 92.855061] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 92.855063] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 92.855072] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 92.857671] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 92.857701] [drm:drm_mode_addfb] [FB:96]
> [ 92.857912] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 92.857917] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 92.857945] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 92.857959] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 92.857996] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 92.858784] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 92.858788] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1]
> [ 92.858792] [drm:intel_crt_detect] [CONNECTOR:17:VGA-1] force=1
> [ 92.858797] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1
> [ 92.858798] [drm:intel_crt_detect] CRT detected via hotplug
> [ 92.871906] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 92.871962] [drm:drm_mode_debug_printmodeline] Modeline 97:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 92.871964] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 92.871967] [drm:drm_mode_debug_printmodeline] Modeline 98:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 92.871968] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 92.871971] [drm:drm_mode_debug_printmodeline] Modeline 136:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> [ 92.871972] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> [ 92.871974] [drm:drm_mode_debug_printmodeline] Modeline 141:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 92.871976] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 92.871981] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1] probed modes :
> [ 92.871984] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 92.871986] [drm:drm_mode_debug_printmodeline] Modeline 70:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 92.871989] [drm:drm_mode_debug_printmodeline] Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6
> [ 92.871991] [drm:drm_mode_debug_printmodeline] Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
> [ 92.871993] [drm:drm_mode_debug_printmodeline] Modeline 74:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
> [ 92.871996] [drm:drm_mode_debug_printmodeline] Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 92.871998] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 92.872000] [drm:drm_mode_debug_printmodeline] Modeline 69:"1440x900" 85 157000 1440 1544 1696 1952 900 903 909 948 0x40 0x6
> [ 92.872003] [drm:drm_mode_debug_printmodeline] Modeline 68:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
> [ 92.872005] [drm:drm_mode_debug_printmodeline] Modeline 67:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
> [ 92.872007] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x960" 85 148500 1280 1344 1504 1728 960 961 964 1011 0x40 0x5
> [ 92.872010] [drm:drm_mode_debug_printmodeline] Modeline 61:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
> [ 92.872012] [drm:drm_mode_debug_printmodeline] Modeline 73:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
> [ 92.872015] [drm:drm_mode_debug_printmodeline] Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
> [ 92.872017] [drm:drm_mode_debug_printmodeline] Modeline 60:"1280x800" 85 122500 1280 1360 1496 1712 800 803 809 843 0x40 0x6
> [ 92.872019] [drm:drm_mode_debug_printmodeline] Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
> [ 92.872021] [drm:drm_mode_debug_printmodeline] Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
> [ 92.872024] [drm:drm_mode_debug_printmodeline] Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 92.872026] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x768" 85 117500 1280 1360 1496 1712 768 771 778 809 0x40 0x6
> [ 92.872028] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
> [ 92.872031] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
> [ 92.872033] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768i" 86 44900 1024 1032 1208 1264 768 768 776 817 0x40 0x15
> [ 92.872035] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 92.872038] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 92.872040] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 92.872042] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 92.872045] [drm:drm_mode_debug_printmodeline] Modeline 72:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
> [ 92.872047] [drm:drm_mode_debug_printmodeline] Modeline 45:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 92.872049] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 92.872052] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 92.872054] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 92.872056] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 92.872058] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 92.872061] [drm:drm_mode_debug_printmodeline] Modeline 54:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
> [ 92.872063] [drm:drm_mode_debug_printmodeline] Modeline 52:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 92.872065] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 92.872068] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 92.872070] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 92.872072] [drm:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 92.872074] [drm:drm_mode_debug_printmodeline] Modeline 38:"720x400" 88 35500 720 738 846 900 400 421 423 449 0x40 0xa
> [ 92.872077] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x400" 85 35500 720 756 828 936 400 401 404 446 0x40 0x6
> [ 92.872079] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 92.872081] [drm:drm_mode_debug_printmodeline] Modeline 50:"640x400" 85 31500 640 672 736 832 400 401 404 445 0x40 0x6
> [ 92.872083] [drm:drm_mode_debug_printmodeline] Modeline 49:"640x350" 85 31500 640 672 736 832 350 382 385 445 0x40 0x9
> [ 92.872096] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 93.292475] [drm:drm_mode_addfb] [FB:96]
> [ 93.367537] [drm:drm_mode_setcrtc] [CRTC:7]
> [ 93.367542] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
> [ 93.367544] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
> [ 93.367546] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
> [ 93.367548] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 93.367549] [drm:drm_mode_debug_printmodeline] Modeline 97:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 93.367550] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
> [ 93.367552] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [NOCRTC]
> [ 93.367553] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 93.367554] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 93.367555] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 93.367556] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 93.367557] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
> [ 93.367558] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
> [ 93.367560] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
> [ 93.367562] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
> [ 93.367563] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
> [ 93.367564] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 93.367565] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
> [ 93.367566] [drm:intel_dump_pipe_config] cpu_transcoder: A
> [ 93.367567] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 93.367568] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 93.367569] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 93.367570] [drm:intel_dump_pipe_config] requested mode:
> [ 93.367571] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 93.367572] [drm:intel_dump_pipe_config] adjusted mode:
> [ 93.367574] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 93.367575] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
> [ 93.367576] [drm:intel_dump_pipe_config] port clock: 162000
> [ 93.367577] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
> [ 93.367578] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 93.367579] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 93.367580] [drm:intel_dump_pipe_config] ips: 0
> [ 93.367581] [drm:intel_dump_pipe_config] double wide: 0
> [ 93.386455] [drm:intel_update_fbc] disabled per chip default
> [ 93.386459] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 11
> [ 93.386461] [drm:intel_disable_shared_dpll] disabling WRPLL 1
> [ 93.400458] [drm:hsw_crt_post_disable] Disabling SPLL
> [ 93.400464] [drm:intel_update_fbc] no output, disabling
> [ 93.401246] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
> [ 93.401247] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
> [ 93.401249] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
> [ 93.401250] [drm:intel_enable_shared_dpll] enabling WRPLL 1
> [ 93.401280] [drm:ironlake_update_primary_plane] Writing base 009DD000 00000000 0 0 6656
> [ 93.401352] [drm:intel_update_fbc] disabled per chip default
> [ 93.401356] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 93.401357] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 93.401359] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 93.401360] [drm:check_crtc_state] [CRTC:7]
> [ 93.401365] [drm:check_crtc_state] [CRTC:11]
> [ 93.401366] [drm:check_crtc_state] [CRTC:15]
> [ 93.401367] [drm:check_shared_dpll_state] WRPLL 1
> [ 93.401368] [drm:check_shared_dpll_state] WRPLL 2
> [ 93.403420] [drm:drm_mode_addfb] [FB:97]
> [ 93.403477] [drm:drm_mode_setcrtc] [CRTC:11]
> [ 93.403479] [drm:drm_mode_setcrtc] [CONNECTOR:17:VGA-1]
> [ 93.403481] [drm:intel_crtc_set_config] [CRTC:11] [FB:97] #connectors=1 (x y) (0 0)
> [ 93.403483] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
> [ 93.403484] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
> [ 93.403486] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 93.403487] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
> [ 93.403488] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 93.403489] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 93.403490] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
> [ 93.403492] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 93.403494] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
> [ 93.403496] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
> [ 93.403497] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 93.403498] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B
> [ 93.403499] [drm:intel_dump_pipe_config] cpu_transcoder: B
> [ 93.403500] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 93.403501] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 7549747, gmch_n: 8388608, link_m: 314572, link_n: 524288, tu: 64
> [ 93.403502] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 93.403503] [drm:intel_dump_pipe_config] requested mode:
> [ 93.403505] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 93.403506] [drm:intel_dump_pipe_config] adjusted mode:
> [ 93.403508] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 93.403509] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
> [ 93.403510] [drm:intel_dump_pipe_config] port clock: 270000
> [ 93.403511] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
> [ 93.403512] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 93.403513] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 93.403514] [drm:intel_dump_pipe_config] ips: 0
> [ 93.403515] [drm:intel_dump_pipe_config] double wide: 0
> [ 93.403531] [drm:ironlake_update_primary_plane] Writing base 0117C000 00000000 0 0 6656
> [ 93.404421] [drm:hsw_fdi_link_train] FDI link training done on step 0
> [ 93.404518] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 162000KHz refresh rate: auxdiv=0, divsel=e, phasedir=0, phaseinc=2a
> [ 93.405252] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
> [ 93.414819] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
> [ 93.421965] [drm:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo underrun on pipe B
> [ 93.430838] [drm:ivb_err_int_handler] *ERROR* Pipe B FIFO underrun
> [ 93.437481] [drm:intel_update_fbc] more than one pipe active, disabling compression
> [ 93.437487] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 93.437490] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 93.437491] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 93.437493] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 93.437494] [drm:check_crtc_state] [CRTC:7]
> [ 93.437499] [drm:check_crtc_state] [CRTC:11]
> [ 93.437506] [drm:check_crtc_state] [CRTC:15]
> [ 93.437508] [drm:check_shared_dpll_state] WRPLL 1
> [ 93.437509] [drm:check_shared_dpll_state] WRPLL 2
> [ 94.267670] Bridge firewalling registered
> [ 94.328267] tun: Universal TUN/TAP device driver, 1.6
> [ 94.333323] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 94.382282] device virbr3-nic entered promiscuous mode
> [ 94.398906] virbr3: port 1(virbr3-nic) entered forwarding state
> [ 94.404842] virbr3: port 1(virbr3-nic) entered forwarding state
> [ 94.810176] usblp0: removed
> [ 94.816313] usblp 3-4:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E9
> [ 94.972271] virbr3: port 1(virbr3-nic) entered disabled state
> [ 95.051234] device virbr2-nic entered promiscuous mode
> [ 95.065574] virbr2: port 1(virbr2-nic) entered forwarding state
> [ 95.071574] virbr2: port 1(virbr2-nic) entered forwarding state
> [ 95.214189] virbr2: port 1(virbr2-nic) entered disabled state
> [ 95.263762] IPv6: ADDRCONF(NETDEV_UP): virbr2-nic: link is not ready
> [ 95.270192] virbr2: port 1(virbr2-nic) entered listening state
> [ 95.276100] virbr2: port 1(virbr2-nic) entered listening state
> [ 95.298309] device virbr0-nic entered promiscuous mode
> [ 95.317877] virbr0: port 1(virbr0-nic) entered forwarding state
> [ 95.323815] virbr0: port 1(virbr0-nic) entered forwarding state
> [ 95.391015] virbr2: port 1(virbr2-nic) entered disabled state
> [ 95.524081] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 95.779961] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 95.779966] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
> [ 95.779969] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
> [ 95.806875] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 95.806891] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
> [ 95.806894] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 95.806896] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
> [ 95.806897] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 95.806899] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 95.806900] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
> [ 95.806902] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 95.806903] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 95.806905] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 95.806906] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 95.806908] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 95.806909] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 95.806911] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 95.806912] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 95.806914] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 95.806915] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 95.806917] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 95.806918] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 95.806919] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 95.806921] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 95.806922] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 95.806924] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 95.806925] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 95.806936] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 95.807056] [drm:drm_mode_setcrtc] [CRTC:7]
> [ 95.807058] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
> [ 95.807060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
> [ 95.807061] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [NOCRTC]
> [ 95.807062] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 95.807063] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
> [ 95.807064] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 95.807065] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
> [ 95.807067] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
> [ 95.822352] [drm:intel_update_fbc] disabled per chip default
> [ 95.822356] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 7
> [ 95.822357] [drm:intel_disable_shared_dpll] disabling WRPLL 1
> [ 95.822365] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 95.822367] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 95.822369] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 95.822370] [drm:check_crtc_state] [CRTC:7]
> [ 95.822372] [drm:check_crtc_state] [CRTC:11]
> [ 95.822380] [drm:check_crtc_state] [CRTC:15]
> [ 95.822381] [drm:check_shared_dpll_state] WRPLL 1
> [ 95.822382] [drm:check_shared_dpll_state] WRPLL 2
> [ 95.824615] [drm:drm_mode_addfb] [FB:98]
> [ 95.824888] [drm:drm_mode_setcrtc] [CRTC:7]
> [ 95.824893] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
> [ 95.824894] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
> [ 95.824896] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
> [ 95.824897] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
> [ 95.824898] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 95.824900] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
> [ 95.824901] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 95.824902] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 95.824903] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
> [ 95.824904] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> [ 95.824907] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
> [ 95.824908] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
> [ 95.824909] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
> [ 95.824911] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 95.824912] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
> [ 95.824913] [drm:intel_dump_pipe_config] cpu_transcoder: A
> [ 95.824914] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 95.824915] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 95.824916] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 95.824917] [drm:intel_dump_pipe_config] requested mode:
> [ 95.824919] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 95.824920] [drm:intel_dump_pipe_config] adjusted mode:
> [ 95.824922] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 95.824923] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
> [ 95.824924] [drm:intel_dump_pipe_config] port clock: 162000
> [ 95.824925] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
> [ 95.824926] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 95.824927] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 95.824928] [drm:intel_dump_pipe_config] ips: 0
> [ 95.824929] [drm:intel_dump_pipe_config] double wide: 0
> [ 95.838295] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
> [ 95.838298] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
> [ 95.838301] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
> [ 95.838302] [drm:intel_enable_shared_dpll] enabling WRPLL 1
> [ 95.838332] [drm:ironlake_update_primary_plane] Writing base 009DD000 00000000 0 0 6656
> [ 95.856391] [drm:intel_update_fbc] more than one pipe active, disabling compression
> [ 95.856397] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 95.856400] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 95.856402] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 95.856403] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 95.856404] [drm:check_crtc_state] [CRTC:7]
> [ 95.856410] [drm:check_crtc_state] [CRTC:11]
> [ 95.856417] [drm:check_crtc_state] [CRTC:15]
> [ 95.856418] [drm:check_shared_dpll_state] WRPLL 1
> [ 95.856419] [drm:check_shared_dpll_state] WRPLL 2
> [ 95.879057] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 96.123371] virbr0: port 1(virbr0-nic) entered disabled state
> [ 96.190405] device virbr1-nic entered promiscuous mode
> [ 96.209943] virbr1: port 1(virbr1-nic) entered forwarding state
> [ 96.215939] virbr1: port 1(virbr1-nic) entered forwarding state
> [ 96.497007] virbr1: port 1(virbr1-nic) entered disabled state
> [ 103.407390] [drm:add_framebuffer_internal] [FB:99]
> [ 113.775394] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> [ 113.781397] Bluetooth: HIDP socket layer initialized
> [ 113.786801] ttyS0: 1 input overrun(s)
> [ 113.787430] hid-generic 0005:046D:B010.0002: unknown main item tag 0x0
> [ 113.797278] input: Bluetooth Mouse M557 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/bluetooth/hci0/hci0:11/0005:046D:B010.0002/input/input15
> [ 113.813659] hid-generic 0005:046D:B010.0002: input,hidraw1: BLUETOOTH HID v10.01 Mouse [Bluetooth Mouse M557] on 00:0d:18:01:3b:9b
> [ 137.017008] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 154.059134] [drm:intel_crtc_cursor_set_obj] cursor off
> [ 154.209170] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.209172] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip
> [ 154.209172] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
> [ 154.209174] [drm:drm_mode_debug_printmodeline] Modeline 99:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 154.209176] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 154.209176] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
> [ 154.209177] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [NOCRTC]
> [ 154.209178] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 154.209178] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.209179] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 154.209179] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 154.209180] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
> [ 154.209181] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
> [ 154.209183] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
> [ 154.209184] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
> [ 154.209185] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 154.209186] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
> [ 154.209186] [drm:intel_dump_pipe_config] cpu_transcoder: A
> [ 154.209186] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 154.209187] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 7340032, gmch_n: 8388608, link_m: 305834, link_n: 524288, tu: 64
> [ 154.209188] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 154.209188] [drm:intel_dump_pipe_config] requested mode:
> [ 154.209190] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 154.209190] [drm:intel_dump_pipe_config] adjusted mode:
> [ 154.209191] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 154.209192] [drm:intel_dump_crtc_timings] crtc timings: 157500 1280 1344 1504 1728 1024 1025 1028 1072, type: 0x48 flags: 0x5
> [ 154.209193] [drm:intel_dump_pipe_config] port clock: 270000
> [ 154.209193] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
> [ 154.209194] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 154.209194] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 154.209195] [drm:intel_dump_pipe_config] ips: 0
> [ 154.209195] [drm:intel_dump_pipe_config] double wide: 0
> [ 154.240737] [drm:hsw_crt_post_disable] Disabling SPLL
> [ 154.240742] [drm:intel_update_fbc] no output, disabling
> [ 154.242737] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 7
> [ 154.242739] [drm:intel_disable_shared_dpll] disabling WRPLL 1
> [ 154.242754] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
> [ 154.243649] [drm:hsw_fdi_link_train] FDI link training done on step 0
> [ 154.243729] [drm:lpt_program_iclkip] iCLKIP clock: found settings for 157500KHz refresh rate: auxdiv=0, divsel=f, phasedir=0, phaseinc=9
> [ 154.243786] [drm:intel_update_fbc] disabled per chip default
> [ 154.243788] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 154.243789] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 154.243790] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 154.243791] [drm:check_crtc_state] [CRTC:7]
> [ 154.243798] [drm:check_crtc_state] [CRTC:11]
> [ 154.243799] [drm:check_crtc_state] [CRTC:15]
> [ 154.243799] [drm:check_shared_dpll_state] WRPLL 1
> [ 154.243800] [drm:check_shared_dpll_state] WRPLL 2
> [ 154.243802] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.243803] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
> [ 154.243803] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
> [ 154.243804] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 154.243804] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.243805] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.243806] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 154.243806] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
> [ 154.243807] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 154.243808] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
> [ 154.243809] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
> [ 154.243809] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
> [ 154.243810] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 154.243810] [drm:intel_dump_pipe_config] [CRTC:11][modeset] config for pipe B
> [ 154.243811] [drm:intel_dump_pipe_config] cpu_transcoder: B
> [ 154.243811] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 154.243812] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 154.243813] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 154.243813] [drm:intel_dump_pipe_config] requested mode:
> [ 154.243814] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 154.243815] [drm:intel_dump_pipe_config] adjusted mode:
> [ 154.243816] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 154.243817] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x48 flags: 0x5
> [ 154.243817] [drm:intel_dump_pipe_config] port clock: 162000
> [ 154.243818] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
> [ 154.243818] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 154.243819] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 154.243819] [drm:intel_dump_pipe_config] ips: 0
> [ 154.243820] [drm:intel_dump_pipe_config] double wide: 0
> [ 154.244601] [drm:intel_get_shared_dpll] CRTC:11 allocated WRPLL 1
> [ 154.244601] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe B
> [ 154.244602] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 11
> [ 154.244603] [drm:intel_enable_shared_dpll] enabling WRPLL 1
> [ 154.244631] [drm:ironlake_update_primary_plane] Writing base 0028A000 00000000 0 0 6400
> [ 154.267773] [drm:intel_update_fbc] more than one pipe active, disabling compression
> [ 154.267776] [drm:intel_connector_check_state] [CONNECTOR:17:VGA-1]
> [ 154.267778] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 154.267782] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 154.267785] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 154.267786] [drm:check_crtc_state] [CRTC:7]
> [ 154.267792] [drm:check_crtc_state] [CRTC:11]
> [ 154.267796] [drm:check_crtc_state] [CRTC:15]
> [ 154.267797] [drm:check_shared_dpll_state] WRPLL 1
> [ 154.267798] [drm:check_shared_dpll_state] WRPLL 2
> [ 154.267799] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
> [ 154.267800] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
> [ 154.267801] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.267801] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.267804] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.267805] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
> [ 154.267806] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.267807] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.267807] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.267808] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 154.267809] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.267809] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.267816] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.267817] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
> [ 154.267817] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.267817] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.267818] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.267819] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 154.267819] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.267820] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.287004] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.287009] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
> [ 154.287011] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.287012] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.287014] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.287016] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 154.287017] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.287018] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.287019] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
> [ 154.287020] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
> [ 154.287021] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.287022] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.324002] [drm:i915_gem_open]
> [ 154.324047] [drm:intel_crtc_set_config] [CRTC:7] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.324050] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=0, fb_changed=0
> [ 154.324051] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.324052] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.324054] [drm:intel_crtc_set_config] [CRTC:11] [FB:95] #connectors=1 (x y) (0 0)
> [ 154.324055] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 154.324056] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.324057] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.324059] [drm:intel_crtc_set_config] [CRTC:15] [NOFB]
> [ 154.324060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:15], mode_changed=0, fb_changed=0
> [ 154.324061] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:7]
> [ 154.324062] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:11]
> [ 154.327155] [drm:i915_gem_open]
> [ 154.327182] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.327687] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.327701] [drm:drm_mode_addfb] [FB:96]
> [ 154.327845] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.327848] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.327875] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 154.327889] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 154.327894] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 154.328012] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 154.328014] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
> [ 154.328016] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
> [ 154.354769] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 154.354782] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
> [ 154.354785] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 154.354787] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
> [ 154.354788] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 154.354790] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 154.354791] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
> [ 154.354793] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 154.354794] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 154.354796] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 154.354797] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 154.354799] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 154.354800] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 154.354802] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 154.354803] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 154.354805] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 154.354806] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 154.354808] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 154.354809] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 154.354810] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 154.354812] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 154.354813] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 154.354815] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 154.354816] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 154.354823] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 154.355641] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.355662] [drm:drm_mode_addfb] [FB:96]
> [ 154.356935] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.356938] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.356958] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 154.356981] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 154.357013] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 154.357096] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 154.357098] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1]
> [ 154.357100] [drm:intel_crt_detect] [CONNECTOR:17:VGA-1] force=1
> [ 154.357104] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1
> [ 154.357105] [drm:intel_crt_detect] CRT detected via hotplug
> [ 154.370195] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 154.370231] [drm:drm_mode_debug_printmodeline] Modeline 97:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 154.370233] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 154.370234] [drm:drm_mode_debug_printmodeline] Modeline 98:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 154.370235] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 154.370237] [drm:drm_mode_debug_printmodeline] Modeline 136:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> [ 154.370238] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> [ 154.370239] [drm:drm_mode_debug_printmodeline] Modeline 141:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 154.370240] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> [ 154.370244] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:17:VGA-1] probed modes :
> [ 154.370245] [drm:drm_mode_debug_printmodeline] Modeline 26:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 154.370247] [drm:drm_mode_debug_printmodeline] Modeline 70:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> [ 154.370248] [drm:drm_mode_debug_printmodeline] Modeline 65:"1400x1050" 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6
> [ 154.370250] [drm:drm_mode_debug_printmodeline] Modeline 64:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
> [ 154.370252] [drm:drm_mode_debug_printmodeline] Modeline 74:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
> [ 154.370253] [drm:drm_mode_debug_printmodeline] Modeline 40:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 154.370255] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 154.370256] [drm:drm_mode_debug_printmodeline] Modeline 69:"1440x900" 85 157000 1440 1544 1696 1952 900 903 909 948 0x40 0x6
> [ 154.370258] [drm:drm_mode_debug_printmodeline] Modeline 68:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
> [ 154.370259] [drm:drm_mode_debug_printmodeline] Modeline 67:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
> [ 154.370261] [drm:drm_mode_debug_printmodeline] Modeline 29:"1280x960" 85 148500 1280 1344 1504 1728 960 961 964 1011 0x40 0x5
> [ 154.370262] [drm:drm_mode_debug_printmodeline] Modeline 61:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
> [ 154.370264] [drm:drm_mode_debug_printmodeline] Modeline 73:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
> [ 154.370265] [drm:drm_mode_debug_printmodeline] Modeline 63:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
> [ 154.370267] [drm:drm_mode_debug_printmodeline] Modeline 60:"1280x800" 85 122500 1280 1360 1496 1712 800 803 809 843 0x40 0x6
> [ 154.370268] [drm:drm_mode_debug_printmodeline] Modeline 59:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
> [ 154.370270] [drm:drm_mode_debug_printmodeline] Modeline 58:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
> [ 154.370271] [drm:drm_mode_debug_printmodeline] Modeline 30:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 154.370273] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x768" 85 117500 1280 1360 1496 1712 768 771 778 809 0x40 0x6
> [ 154.370274] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
> [ 154.370275] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
> [ 154.370277] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768i" 86 44900 1024 1032 1208 1264 768 768 776 817 0x40 0x15
> [ 154.370279] [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 154.370280] [drm:drm_mode_debug_printmodeline] Modeline 41:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 154.370281] [drm:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 154.370283] [drm:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 154.370284] [drm:drm_mode_debug_printmodeline] Modeline 72:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
> [ 154.370286] [drm:drm_mode_debug_printmodeline] Modeline 45:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 154.370287] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 154.370289] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 154.370290] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 154.370292] [drm:drm_mode_debug_printmodeline] Modeline 32:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 154.370293] [drm:drm_mode_debug_printmodeline] Modeline 33:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 154.370295] [drm:drm_mode_debug_printmodeline] Modeline 54:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
> [ 154.370296] [drm:drm_mode_debug_printmodeline] Modeline 52:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 154.370298] [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 154.370299] [drm:drm_mode_debug_printmodeline] Modeline 35:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 154.370301] [drm:drm_mode_debug_printmodeline] Modeline 36:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 154.370302] [drm:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 154.370304] [drm:drm_mode_debug_printmodeline] Modeline 38:"720x400" 88 35500 720 738 846 900 400 421 423 449 0x40 0xa
> [ 154.370305] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x400" 85 35500 720 756 828 936 400 401 404 446 0x40 0x6
> [ 154.370306] [drm:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 154.370308] [drm:drm_mode_debug_printmodeline] Modeline 50:"640x400" 85 31500 640 672 736 832 400 401 404 445 0x40 0x6
> [ 154.370309] [drm:drm_mode_debug_printmodeline] Modeline 49:"640x350" 85 31500 640 672 736 832 350 382 385 445 0x40 0x9
> [ 154.370317] [drm:drm_mode_getconnector] [CONNECTOR:17:?]
> [ 154.418945] [drm:drm_mode_addfb] [FB:96]
> [ 154.419144] [drm:drm_mode_setcrtc] [CRTC:7]
> [ 154.419147] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
> [ 154.419149] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
> [ 154.419151] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
> [ 154.419153] [drm:drm_mode_debug_printmodeline] Modeline 93:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x48 0x5
> [ 154.419155] [drm:drm_mode_debug_printmodeline] Modeline 97:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 154.419156] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=1
> [ 154.419157] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [NOCRTC]
> [ 154.419158] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 154.419159] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 154.419160] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 154.419161] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 154.419162] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
> [ 154.419164] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 2
> [ 154.419165] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
> [ 154.419167] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
> [ 154.419168] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
> [ 154.419169] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 154.419171] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
> [ 154.419172] [drm:intel_dump_pipe_config] cpu_transcoder: A
> [ 154.419173] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 154.419174] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 154.419175] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 154.419176] [drm:intel_dump_pipe_config] requested mode:
> [ 154.419177] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 154.419178] [drm:intel_dump_pipe_config] adjusted mode:
> [ 154.419180] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 154.419181] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
> [ 154.419182] [drm:intel_dump_pipe_config] port clock: 162000
> [ 154.419183] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
> [ 154.419184] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 154.419185] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 154.419186] [drm:intel_dump_pipe_config] ips: 0
> [ 154.419187] [drm:intel_dump_pipe_config] double wide: 0
> [ 154.429977] [drm:intel_update_fbc] disabled per chip default
> [ 154.429980] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 11
> [ 154.429982] [drm:intel_disable_shared_dpll] disabling WRPLL 1
> [ 154.443999] [drm:hsw_crt_post_disable] Disabling SPLL
> [ 154.444005] [drm:intel_update_fbc] no output, disabling
> [ 154.444785] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
> [ 154.444786] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
> [ 154.444788] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
> [ 154.444789] [drm:intel_enable_shared_dpll] enabling WRPLL 1
> [ 154.444818] [drm:ironlake_update_primary_plane] Writing base 02109000 00000000 0 0 6656
> [ 154.444890] [drm:intel_update_fbc] disabled per chip default
> [ 154.444893] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 154.444895] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 154.444896] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 154.444897] [drm:check_crtc_state] [CRTC:7]
> [ 154.444902] [drm:check_crtc_state] [CRTC:11]
> [ 154.444903] [drm:check_crtc_state] [CRTC:15]
> [ 154.444904] [drm:check_shared_dpll_state] WRPLL 1
> [ 154.444906] [drm:check_shared_dpll_state] WRPLL 2
> [ 154.447605] [drm:drm_mode_addfb] [FB:97]
> [ 154.447658] [drm:drm_mode_setcrtc] [CRTC:11]
> [ 154.447662] [drm:drm_mode_setcrtc] [CONNECTOR:17:VGA-1]
> [ 154.447663] [drm:intel_crtc_set_config] [CRTC:11] [FB:97] #connectors=1 (x y) (0 0)
> [ 154.447665] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
> [ 154.447666] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
> [ 154.447669] [drm:drm_mode_debug_printmodeline] Modeline 94:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 154.447670] [drm:drm_mode_debug_printmodeline] Modeline 98:"" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 154.447671] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
> [ 154.447672] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 154.447674] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
> [ 154.447675] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 154.447676] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 154.447677] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
> [ 154.447679] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 154.447680] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
> [ 154.447682] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
> [ 154.447683] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
> [ 154.447684] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
> [ 154.447685] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
> [ 154.447685] [drm:intel_modeset_pipe_config] CRTC bw constrained, retrying
> [ 154.447686] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
> [ 154.447687] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
> [ 154.447688] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
> [ 154.447689] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
> [ 154.447690] ------------[ cut here ]------------
> [ 154.452346] WARNING: CPU: 1 PID: 2151 at drivers/gpu/drm/i915/intel_display.c:10173 __intel_set_mode+0x15fb/0x16f0 [i915]()
> [ 154.463524] loop in pipe configuration computation
> [ 154.468336] Modules linked in: hidp xt_CHECKSUM iptable_mangle
> [ 154.472809] ttyS0: 6 input overrun(s)
> [ 154.477778] ipt_MASQUERADE
> [ 154.480642] iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc bnep hwmon_vid btrfs xor raid6_pq uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media iTCO_wdt iTCO_vendor_support ppdev btusb snd_usb_audio bluetooth snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_usbmidi_lib x86_pkg_temp_thermal snd_rawmidi rfkill coretemp usblp kvm_intel kvm snd_hda_intel snd_hda_controller crct10dif_pclmul snd_hda_codec i915 crc32_pclmul crc32c_intel snd_hwdep ghash_clmulni_intel snd_seq snd_seq_device snd_pcm i2c_algo_bit drm_kms_helper snd_timer serio_raw snd sata_via i2c_i801 drm lpc_ich mfd_core shpchp soundcore mei_me mei tpm_infineon tpm_tis tpm parport_pc parport nfsd auth_rpcgss nfs_acl lockd sunrpc
> [ 154.552918] r8169 mii video
> [ 154.554614] CPU: 1 PID: 2151 Comm: Xorg.bin Not tainted 3.17.7-300.fc21.x86_64 #1
> [ 154.562102] Hardware name: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
> [ 154.570935] 0000000000000000 0000000052a00808 ffff8803f3cffaf8 ffffffff817401ea
> [ 154.578542] ffff8803f3cffb40 ffff8803f3cffb30 ffffffff810970bd ffffffffffffffea
> [ 154.586117] ffff880406dcf000 ffff880407742800 0000000000000001 ffff880406958b40
> [ 154.593633] Call Trace:
> [ 154.596094] [<ffffffff817401ea>] dump_stack+0x45/0x56
> [ 154.601282] [<ffffffff810970bd>] warn_slowpath_common+0x7d/0xa0
> [ 154.607337] [<ffffffff8109713c>] warn_slowpath_fmt+0x5c/0x80
> [ 154.613147] [<ffffffffa0291958>] ? __intel_set_mode+0x988/0x16f0 [i915]
> [ 154.619892] [<ffffffffa02925cb>] __intel_set_mode+0x15fb/0x16f0 [i915]
> [ 154.626555] [<ffffffffa029a0d6>] intel_set_mode+0x16/0x30 [i915]
> [ 154.632698] [<ffffffffa029b22a>] intel_crtc_set_config+0xa9a/0xeb0 [i915]
> [ 154.639627] [<ffffffffa0155a34>] drm_mode_set_config_internal+0x64/0xe0 [drm]
> [ 154.646894] [<ffffffffa015a14b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
> [ 154.653293] [<ffffffffa014be6f>] drm_ioctl+0x1df/0x680 [drm]
> [ 154.659088] [<ffffffff81220ff0>] do_vfs_ioctl+0x2d0/0x4b0
> [ 154.664621] [<ffffffff81221251>] SyS_ioctl+0x81/0xa0
> [ 154.669723] [<ffffffff81135d96>] ? __audit_syscall_exit+0x1f6/0x2a0
> [ 154.676128] [<ffffffff817473a9>] system_call_fastpath+0x16/0x1b
> [ 154.682184] ---[ end trace dc5bdfed07eb12f9 ]---
> [ 154.686852] [drm:intel_crtc_set_config] failed to set mode on [CRTC:11], err = -22
> [ 154.687021] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
> [ 154.687031] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 154.687032] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 154.687034] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 154.687037] [drm:check_crtc_state] [CRTC:7]
> [ 154.687044] [drm:check_crtc_state] [CRTC:11]
> [ 154.687047] [drm:check_crtc_state] [CRTC:15]
> [ 154.687050] [drm:check_shared_dpll_state] WRPLL 1
> [ 154.687051] [drm:check_shared_dpll_state] WRPLL 2
> [ 154.689818] [drm:drm_mode_addfb] [FB:98]
> [ 154.689869] [drm:drm_mode_setcrtc] [CRTC:11]
> [ 154.689872] [drm:drm_mode_setcrtc] [CONNECTOR:17:VGA-1]
> [ 154.689874] [drm:intel_crtc_set_config] [CRTC:11] [FB:98] #connectors=1 (x y) (0 0)
> [ 154.689876] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
> [ 154.689877] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
> [ 154.689879] [drm:drm_mode_debug_printmodeline] Modeline 94:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 154.689881] [drm:drm_mode_debug_printmodeline] Modeline 99:"" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 154.689882] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=1, fb_changed=0
> [ 154.689883] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 154.689885] [drm:intel_modeset_stage_output_state] [CONNECTOR:17:VGA-1] to [CRTC:11]
> [ 154.689886] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 154.689887] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 154.689888] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
> [ 154.689890] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
> [ 154.689891] [drm:connected_sink_compute_bpp] [CONNECTOR:17:VGA-1] checking for sink bpp constrains
> [ 154.689893] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
> [ 154.689894] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
> [ 154.689895] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
> [ 154.689896] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
> [ 154.689897] [drm:intel_modeset_pipe_config] CRTC bw constrained, retrying
> [ 154.689898] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 3
> [ 154.689898] [drm:ironlake_check_fdi_lanes] only 2 lanes on haswell, required: 3 lanes
> [ 154.689899] [drm:ironlake_fdi_compute_config] fdi link bw constraint, reducing pipe bpp to 18
> [ 154.689900] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 2
> [ 154.689901] ------------[ cut here ]------------
> [ 154.694554] WARNING: CPU: 1 PID: 2151 at drivers/gpu/drm/i915/intel_display.c:10173 __intel_set_mode+0x15fb/0x16f0 [i915]()
> [ 154.705708] loop in pipe configuration computation
> [ 154.710540] Modules linked in: hidp xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc bnep hwmon_vid btrfs xor raid6_pq uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media iTCO_wdt iTCO_vendor_support ppdev btusb snd_usb_audio bluetooth snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_usbmidi_lib x86_pkg_temp_thermal snd_rawmidi rfkill coretemp usblp kvm_intel kvm snd_hda_intel snd_hda_controller crct10dif_pclmul snd_hda_codec i915 crc32_pclmul crc32c_intel snd_hwdep ghash_clmulni_intel snd_seq snd_seq_device snd_pcm i2c_algo_bit drm_kms_helper snd_timer serio_raw snd sata_via i2c_i801 drm lpc_ich mfd_core shpchp soundcore mei_me mei tpm_infineon
> [ 154.783599] tpm_tis tpm parport_pc parport nfsd auth_rpcgss nfs_acl lockd sunrpc r8169 mii video
> [ 154.791600] CPU: 1 PID: 2151 Comm: Xorg.bin Tainted: G W 3.17.7-300.fc21.x86_64 #1
> [ 154.800209] Hardware name: Gigabyte Technology Co., Ltd. H81M-S2PV/H81M-S2PV, BIOS F8 06/19/2014
> [ 154.809033] 0000000000000000 0000000052a00808 ffff8803f3cffaf8 ffffffff817401ea
> [ 154.816597] ffff8803f3cffb40 ffff8803f3cffb30 ffffffff810970bd ffffffffffffffea
> [ 154.824208] ffff880406dcf000 ffff880407742800 0000000000000001 ffff880406958b40
> [ 154.831749] Call Trace:
> [ 154.834254] [<ffffffff817401ea>] dump_stack+0x45/0x56
> [ 154.839441] [<ffffffff810970bd>] warn_slowpath_common+0x7d/0xa0
> [ 154.845494] [<ffffffff8109713c>] warn_slowpath_fmt+0x5c/0x80
> [ 154.851301] [<ffffffffa0291958>] ? __intel_set_mode+0x988/0x16f0 [i915]
> [ 154.858053] [<ffffffffa02925cb>] __intel_set_mode+0x15fb/0x16f0 [i915]
> [ 154.864716] [<ffffffffa029a0d6>] intel_set_mode+0x16/0x30 [i915]
> [ 154.870860] [<ffffffffa029b22a>] intel_crtc_set_config+0xa9a/0xeb0 [i915]
> [ 154.877782] [<ffffffffa0155a34>] drm_mode_set_config_internal+0x64/0xe0 [drm]
> [ 154.885051] [<ffffffffa015a14b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
> [ 154.891453] [<ffffffffa014be6f>] drm_ioctl+0x1df/0x680 [drm]
> [ 154.897248] [<ffffffff81220ff0>] do_vfs_ioctl+0x2d0/0x4b0
> [ 154.902783] [<ffffffff81221251>] SyS_ioctl+0x81/0xa0
> [ 154.907884] [<ffffffff81135d96>] ? __audit_syscall_exit+0x1f6/0x2a0
> [ 154.914288] [<ffffffff817473a9>] system_call_fastpath+0x16/0x1b
> [ 154.920341] ---[ end trace dc5bdfed07eb12fa ]---
> [ 154.924958] [drm:intel_crtc_set_config] failed to set mode on [CRTC:11], err = -22
> [ 154.925071] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
> [ 154.925082] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 154.925085] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 154.925087] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 154.925088] [drm:check_crtc_state] [CRTC:7]
> [ 154.925099] [drm:check_crtc_state] [CRTC:11]
> [ 154.925102] [drm:check_crtc_state] [CRTC:15]
> [ 154.925105] [drm:check_shared_dpll_state] WRPLL 1
> [ 154.925107] [drm:check_shared_dpll_state] WRPLL 2
> [ 154.925157] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
> [ 154.925159] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 154.925171] [drm:drm_mode_setcrtc] [CRTC:11]
> [ 154.925173] [drm:intel_crtc_set_config] [CRTC:11] [NOFB]
> [ 154.925174] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:11], mode_changed=0, fb_changed=0
> [ 154.925175] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 154.984838] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 154.984842] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1]
> [ 154.984846] [drm:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-1]
> [ 155.011650] [drm:drm_edid_to_eld] ELD: no CEA Extension found
> [ 155.011664] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes :
> [ 155.011666] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x48 0x5
> [ 155.011668] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
> [ 155.011669] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 155.011671] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
> [ 155.011672] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
> [ 155.011674] [drm:drm_mode_debug_printmodeline] Modeline 75:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
> [ 155.011675] [drm:drm_mode_debug_printmodeline] Modeline 71:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
> [ 155.011677] [drm:drm_mode_debug_printmodeline] Modeline 87:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
> [ 155.011678] [drm:drm_mode_debug_printmodeline] Modeline 88:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
> [ 155.011680] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 155.011681] [drm:drm_mode_debug_printmodeline] Modeline 90:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
> [ 155.011683] [drm:drm_mode_debug_printmodeline] Modeline 66:"800x600" 85 56250 800 832 896 1048 600 601 604 631 0x40 0x5
> [ 155.011684] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
> [ 155.011686] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
> [ 155.011687] [drm:drm_mode_debug_printmodeline] Modeline 79:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 155.011688] [drm:drm_mode_debug_printmodeline] Modeline 80:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 155.011690] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 85 36000 640 696 752 832 480 481 484 509 0x40 0xa
> [ 155.011691] [drm:drm_mode_debug_printmodeline] Modeline 81:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
> [ 155.011693] [drm:drm_mode_debug_printmodeline] Modeline 82:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
> [ 155.011694] [drm:drm_mode_debug_printmodeline] Modeline 83:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
> [ 155.011696] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 155.011697] [drm:drm_mode_debug_printmodeline] Modeline 85:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
> [ 155.011707] [drm:drm_mode_getconnector] [CONNECTOR:20:?]
> [ 155.011873] [drm:drm_mode_setcrtc] [CRTC:7]
> [ 155.011875] [drm:intel_crtc_set_config] [CRTC:7] [NOFB]
> [ 155.011877] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
> [ 155.011878] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [NOCRTC]
> [ 155.011879] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 155.011880] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 155.011881] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
> [ 155.011883] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
> [ 155.013665] [drm:intel_update_fbc] no output, disabling
> [ 155.013668] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 7
> [ 155.013669] [drm:intel_disable_shared_dpll] disabling WRPLL 1
> [ 155.013674] [drm:intel_display_power_put] disabling always-on
> [ 155.013679] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 155.013680] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 155.013681] [drm:check_crtc_state] [CRTC:7]
> [ 155.013683] [drm:check_crtc_state] [CRTC:11]
> [ 155.013684] [drm:check_crtc_state] [CRTC:15]
> [ 155.013685] [drm:check_shared_dpll_state] WRPLL 1
> [ 155.013686] [drm:check_shared_dpll_state] WRPLL 2
> [ 155.015973] [drm:drm_mode_addfb] [FB:99]
> [ 155.016111] [drm:drm_mode_setcrtc] [CRTC:7]
> [ 155.016114] [drm:drm_mode_setcrtc] [CONNECTOR:20:HDMI-A-1]
> [ 155.016116] [drm:intel_crtc_set_config] [CRTC:7] [FB:96] #connectors=1 (x y) (0 0)
> [ 155.016117] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set
> [ 155.016119] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:7], mode_changed=1, fb_changed=0
> [ 155.016120] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
> [ 155.016121] [drm:intel_modeset_stage_output_state] [CONNECTOR:20:HDMI-A-1] to [CRTC:7]
> [ 155.016122] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
> [ 155.016123] [drm:intel_modeset_stage_output_state] crtc enabled, full mode switch
> [ 155.016125] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
> [ 155.016127] [drm:connected_sink_compute_bpp] [CONNECTOR:20:HDMI-A-1] checking for sink bpp constrains
> [ 155.016129] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
> [ 155.016129] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
> [ 155.016131] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
> [ 155.016132] [drm:intel_dump_pipe_config] [CRTC:7][modeset] config for pipe A
> [ 155.016133] [drm:intel_dump_pipe_config] cpu_transcoder: A
> [ 155.016134] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
> [ 155.016135] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 155.016136] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
> [ 155.016137] [drm:intel_dump_pipe_config] requested mode:
> [ 155.016139] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 155.016140] [drm:intel_dump_pipe_config] adjusted mode:
> [ 155.016141] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x0 0x5
> [ 155.016143] [drm:intel_dump_crtc_timings] crtc timings: 162000 1600 1664 1856 2160 1200 1201 1204 1250, type: 0x0 flags: 0x5
> [ 155.016144] [drm:intel_dump_pipe_config] port clock: 162000
> [ 155.016144] [drm:intel_dump_pipe_config] pipe src size: 1600x1200
> [ 155.016146] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
> [ 155.016147] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
> [ 155.016147] [drm:intel_dump_pipe_config] ips: 0
> [ 155.016148] [drm:intel_dump_pipe_config] double wide: 0
> [ 155.016151] [drm:intel_display_power_get] enabling always-on
> [ 155.030187] [drm:intel_get_shared_dpll] CRTC:7 allocated WRPLL 1
> [ 155.030189] [drm:intel_get_shared_dpll] using WRPLL 1 for pipe A
> [ 155.030191] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 0, on? 0)for crtc 7
> [ 155.030192] [drm:intel_enable_shared_dpll] enabling WRPLL 1
> [ 155.030222] [drm:ironlake_update_primary_plane] Writing base 02109000 00000000 0 0 6656
> [ 155.030312] [drm:intel_update_fbc] disabled per chip default
> [ 155.030316] [drm:intel_connector_check_state] [CONNECTOR:20:HDMI-A-1]
> [ 155.030318] [drm:check_encoder_state] [ENCODER:18:DAC-18]
> [ 155.030319] [drm:check_encoder_state] [ENCODER:19:TMDS-19]
> [ 155.030322] [drm:check_crtc_state] [CRTC:7]
> [ 155.030331] [drm:check_crtc_state] [CRTC:11]
> [ 155.030332] [drm:check_crtc_state] [CRTC:15]
> [ 155.030335] [drm:check_shared_dpll_state] WRPLL 1
> [ 155.030336] [drm:check_shared_dpll_state] WRPLL 2
> [ 155.036925] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> [ 158.340777] [drm:add_framebuffer_internal] [FB:100]
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-02 18:07 ` Daniel Vetter
@ 2015-03-02 18:44 ` Ville Syrjälä
2015-03-02 20:16 ` Brian J. Murrell
2015-03-02 20:08 ` Brian J. Murrell
1 sibling, 1 reply; 15+ messages in thread
From: Ville Syrjälä @ 2015-03-02 18:44 UTC (permalink / raw)
To: Daniel Vetter; +Cc: intel-gfx, Brian J. Murrell
On Mon, Mar 02, 2015 at 07:07:47PM +0100, Daniel Vetter wrote:
> On Mon, Mar 02, 2015 at 11:33:39AM -0500, Brian J. Murrell wrote:
> > On Mon, 2015-03-02 at 09:07 +0000, Chris Wilson wrote:
> >
> > > Can you please attach dmesg with drm.debug=6 on the command line?
> >
> > Please find it attached. I did notice in it though:
> >
> > [ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > [ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > [ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > [ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > [ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> > [ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> > [ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > [ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> >
> > Why would it think those modes are invalid?
>
> 15 = dotclock too high for your chip.
The <180MHz modes are dropped only due to the +5% we add to account for SSC on
FDI. I wonder if we really need that much?
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ca49b6f..2df5a9a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7370,9 +7370,9 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
/*
* Account for spread spectrum to avoid
* oversubscribing the link. Max center spread
- * is 2.5%; use 5% for safety's sake.
+ * is 2.5%.
*/
- u32 bps = target_clock * bpp * 21 / 20;
+ u32 bps = target_clock * bpp * 41 / 40;
return DIV_ROUND_UP(bps, link_bw * 8);
}
would at least allow the 175.5MHz mode through while dropping the other ones.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-02 18:07 ` Daniel Vetter
2015-03-02 18:44 ` Ville Syrjälä
@ 2015-03-02 20:08 ` Brian J. Murrell
1 sibling, 0 replies; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-02 20:08 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 1527 bytes --]
On Mon, 2015-03-02 at 19:07 +0100, Daniel Vetter wrote:
> On Mon, Mar 02, 2015 at 11:33:39AM -0500, Brian J. Murrell wrote:
> > On Mon, 2015-03-02 at 09:07 +0000, Chris Wilson wrote:
> >
> > > Can you please attach dmesg with drm.debug=6 on the command line?
> >
> > Please find it attached. I did notice in it though:
> >
> > [ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > [ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > [ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > [ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > [ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> > [ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> > [ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > [ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> >
> > Why would it think those modes are invalid?
>
> 15 = dotclock too high for your chip.
Ahhh. So in layman's terms, my nVidia card was better, at least in
terms of being able to handle higher dotclocks?
That will be a pity if the case. I was sure looking forward to getting
rid of this nVidia card. :-(
b.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-02 18:44 ` Ville Syrjälä
@ 2015-03-02 20:16 ` Brian J. Murrell
2015-03-03 13:03 ` Ville Syrjälä
0 siblings, 1 reply; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-02 20:16 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 1404 bytes --]
On Mon, 2015-03-02 at 20:44 +0200, Ville Syrjälä wrote:
> On Mon, Mar 02, 2015 at 07:07:47PM +0100, Daniel Vetter wrote:
> > On Mon, Mar 02, 2015 at 11:33:39AM -0500, Brian J. Murrell wrote:
> > >
> > > [ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > > [ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > > [ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > > [ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > > [ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> > > [ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> > > [ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > > [ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > >
> The <180MHz modes are dropped only due to the +5% we add to account for SSC on
> FDI. I wonder if we really need that much?
I guess this would get me the "71" modeline but not the "27" one. Any
idea what refresh rate that "71" would be at? I forget how to do all of
that video timing math.
Cheers,
b.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-02 20:16 ` Brian J. Murrell
@ 2015-03-03 13:03 ` Ville Syrjälä
2015-03-03 13:16 ` Brian J. Murrell
0 siblings, 1 reply; 15+ messages in thread
From: Ville Syrjälä @ 2015-03-03 13:03 UTC (permalink / raw)
To: Brian J. Murrell; +Cc: intel-gfx
On Mon, Mar 02, 2015 at 03:16:16PM -0500, Brian J. Murrell wrote:
> On Mon, 2015-03-02 at 20:44 +0200, Ville Syrjälä wrote:
> > On Mon, Mar 02, 2015 at 07:07:47PM +0100, Daniel Vetter wrote:
> > > On Mon, Mar 02, 2015 at 11:33:39AM -0500, Brian J. Murrell wrote:
> > > >
> > > > [ 50.508381] [drm:drm_mode_debug_printmodeline] Modeline 27:"1600x1200" 0 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > > > [ 50.508383] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > > > [ 50.508385] [drm:drm_mode_debug_printmodeline] Modeline 28:"1600x1200" 0 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > > > [ 50.508385] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > > > [ 50.508387] [drm:drm_mode_debug_printmodeline] Modeline 66:"1400x1050" 0 179500 1400 1504 1656 1912 1050 1053 1057 1105 0x40 0x6
> > > > [ 50.508388] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode 15
> > > > [ 50.508390] [drm:drm_mode_debug_printmodeline] Modeline 71:"1600x1200" 0 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
> > > > [ 50.508390] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode 15
> > > >
>
> > The <180MHz modes are dropped only due to the +5% we add to account for SSC on
> > FDI. I wonder if we really need that much?
>
> I guess this would get me the "71" modeline but not the "27" one. Any
> idea what refresh rate that "71" would be at? I forget how to do all of
> that video timing math.
175500*1000/2160/1250 = 65
Oh that's an a CRT monitor you have there. Been a while since I've
come across one of those :) 65Hz on a CRT sounds like a good way to
get a headache to me.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-03 13:03 ` Ville Syrjälä
@ 2015-03-03 13:16 ` Brian J. Murrell
2015-03-03 13:31 ` Ville Syrjälä
0 siblings, 1 reply; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-03 13:16 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 525 bytes --]
On Tue, 2015-03-03 at 15:03 +0200, Ville Syrjälä wrote:
>
> Oh that's an a CRT monitor you have there. Been a while since I've
> come across one of those :)
Heh. Yeah. I have been in the market to replace it but no good enough
deals yet. :-)
> 65Hz on a CRT sounds like a good way to
> get a headache to me.
Worse than the 60Hz that I am stuck with right now though? On paper
+5Hz should be slightly better but maybe there is something particular
about 65Hz that makes it worse than 60Hz?
b.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-03 13:16 ` Brian J. Murrell
@ 2015-03-03 13:31 ` Ville Syrjälä
2015-03-03 16:44 ` Brian J. Murrell
0 siblings, 1 reply; 15+ messages in thread
From: Ville Syrjälä @ 2015-03-03 13:31 UTC (permalink / raw)
To: Brian J. Murrell; +Cc: intel-gfx
On Tue, Mar 03, 2015 at 08:16:56AM -0500, Brian J. Murrell wrote:
> On Tue, 2015-03-03 at 15:03 +0200, Ville Syrjälä wrote:
> >
> > Oh that's an a CRT monitor you have there. Been a while since I've
> > come across one of those :)
>
> Heh. Yeah. I have been in the market to replace it but no good enough
> deals yet. :-)
>
> > 65Hz on a CRT sounds like a good way to
> > get a headache to me.
>
> Worse than the 60Hz that I am stuck with right now though? On paper
> +5Hz should be slightly better but maybe there is something particular
> about 65Hz that makes it worse than 60Hz?
I suppose any increase is good. But personally I just couldn't stand
anything below 75Hz when I was still using a CRT.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-03 13:31 ` Ville Syrjälä
@ 2015-03-03 16:44 ` Brian J. Murrell
2015-03-03 18:40 ` Jani Nikula
0 siblings, 1 reply; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-03 16:44 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 819 bytes --]
On Tue, 2015-03-03 at 15:31 +0200, Ville Syrjälä wrote:
>
> I suppose any increase is good. But personally I just couldn't stand
> anything below 75Hz when I was still using a CRT.
Yeah. 75Hz is what I was using with the nVidia card I replaced with
this new motherboard and Celeron G1840.
Slightly off on a tangent... do LCD screens driven through the DSUB have
the same flicker issues as CRTs or does that somehow get washed out by
the difference between LCD and CRT technology?
Just thinking about when I do replace this CRT with an LCD or LED if I
eventually will be wanting a new (or the old nVidia that I was using)
video card to get that analog refresh rate up. Although I suppose if I
get a second digital monitor and a new video card, they could both just
be DVI/HDMI.
Cheers,
b.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-03 16:44 ` Brian J. Murrell
@ 2015-03-03 18:40 ` Jani Nikula
2015-03-03 19:04 ` Brian J. Murrell
0 siblings, 1 reply; 15+ messages in thread
From: Jani Nikula @ 2015-03-03 18:40 UTC (permalink / raw)
To: Brian J. Murrell, intel-gfx
On Tue, 03 Mar 2015, "Brian J. Murrell" <brian@interlinx.bc.ca> wrote:
> Slightly off on a tangent... do LCD screens driven through the DSUB have
> the same flicker issues as CRTs or does that somehow get washed out by
> the difference between LCD and CRT technology?
You'll lose the flicker with LCD, but given a digital source and a
digital display, it seems silly to convert the signal to analog and back
for the cable in between... I'd go for HDMI or DP.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-03 18:40 ` Jani Nikula
@ 2015-03-03 19:04 ` Brian J. Murrell
2015-03-03 19:16 ` Jani Nikula
0 siblings, 1 reply; 15+ messages in thread
From: Brian J. Murrell @ 2015-03-03 19:04 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1.1: Type: text/plain, Size: 583 bytes --]
On Tue, 2015-03-03 at 20:40 +0200, Jani Nikula wrote:
>
> You'll lose the flicker with LCD,
Even with an analog DSUB input? I only ask again due to the confusion
below...
> but given a digital source
I don't have a digital source. I have a 15-pin DSUB analog source.
> and a
> digital display, it seems silly to convert the signal to analog and back
> for the cable in between...
Of course.
> I'd go for HDMI or DP.
Which I do for one of the two outputs on this motherboard. One is DVI
and one is DSUB analog. I want dual screens.
Cheers,
b.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: i915 driver doesn't find all Modelines that nouveau driver finds
2015-03-03 19:04 ` Brian J. Murrell
@ 2015-03-03 19:16 ` Jani Nikula
0 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2015-03-03 19:16 UTC (permalink / raw)
To: Brian J. Murrell, intel-gfx
On Tue, 03 Mar 2015, "Brian J. Murrell" <brian@interlinx.bc.ca> wrote:
> On Tue, 2015-03-03 at 20:40 +0200, Jani Nikula wrote:
>>
>> You'll lose the flicker with LCD,
>
> Even with an analog DSUB input? I only ask again due to the confusion
> below...
Yes. You may get other artefacts due to the D/A-A/D conversions and the
analog cable, but there should be no flicker.
>> but given a digital source
>
> I don't have a digital source. I have a 15-pin DSUB analog source.
I meant the display hardware before the D/A conversion to legacy stuff.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2015-03-03 19:17 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-01 19:12 i915 driver doesn't find all Modelines that nouveau driver finds Brian J. Murrell
2015-03-02 9:07 ` Chris Wilson
2015-03-02 11:16 ` Brian J. Murrell
2015-03-02 16:33 ` Brian J. Murrell
2015-03-02 18:07 ` Daniel Vetter
2015-03-02 18:44 ` Ville Syrjälä
2015-03-02 20:16 ` Brian J. Murrell
2015-03-03 13:03 ` Ville Syrjälä
2015-03-03 13:16 ` Brian J. Murrell
2015-03-03 13:31 ` Ville Syrjälä
2015-03-03 16:44 ` Brian J. Murrell
2015-03-03 18:40 ` Jani Nikula
2015-03-03 19:04 ` Brian J. Murrell
2015-03-03 19:16 ` Jani Nikula
2015-03-02 20:08 ` Brian J. Murrell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.