From: Quentin Lambert <lambert.quentin@gmail.com> To: Lidza Louina <lidza.louina@gmail.com>, Mark Hounschell <markh@compro.net>, Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: kernel-janitors@vger.kernel.org, driverdev-devel@linuxdriverproject.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/3] Staging: dgnc: Use goto for error handling Date: Wed, 11 Mar 2015 15:04:33 +0100 [thread overview] Message-ID: <20150311140433.GA17051@sloth> (raw) This patch introduces goto statments for error handling and in cases where a lock needs to be released. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @candidates exists@ identifier f, label; statement s; position p1, p2, p3; @@ f@p1(...) { ...when any if@p2(...) { ...when any s return@p3 ...; } ...when any } @good1 exists@ identifier candidates.f, candidates.label; statement candidates.s; position candidates.p1, candidates.p2; @@ f@p1(...) { ...when any if(...) { ...when any s return ...; } ...when any if@p2(...) {...} ...when any } @depends on good1@ identifier candidates.f, candidates.label; position candidates.p1, candidates.p3; @@ f@p1(...) { ...when any * return@p3 ...; } Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> --- drivers/staging/dgnc/dgnc_cls.c | 19 +++++++------------ drivers/staging/dgnc/dgnc_driver.c | 14 +++----------- drivers/staging/dgnc/dgnc_neo.c | 30 ++++++++++++------------------ 3 files changed, 22 insertions(+), 41 deletions(-) diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c index bedc522..02f19f1 100644 --- a/drivers/staging/dgnc/dgnc_cls.c +++ b/drivers/staging/dgnc/dgnc_cls.c @@ -1029,22 +1029,16 @@ static void cls_copy_data_from_queue_to_uart(struct channel_t *ch) spin_lock_irqsave(&ch->ch_lock, flags); /* No data to write to the UART */ - if (ch->ch_w_tail == ch->ch_w_head) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (ch->ch_w_tail == ch->ch_w_head) + goto exit_unlock; /* If port is "stopped", don't send any data to the UART */ if ((ch->ch_flags & CH_FORCED_STOP) || - (ch->ch_flags & CH_BREAK_SENDING)) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + (ch->ch_flags & CH_BREAK_SENDING)) + goto exit_unlock; - if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + goto exit_unlock; n = 32; @@ -1094,6 +1088,7 @@ static void cls_copy_data_from_queue_to_uart(struct channel_t *ch) if (len_written > 0) ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); +exit_unlock: spin_unlock_irqrestore(&ch->ch_lock, flags); } diff --git a/drivers/staging/dgnc/dgnc_driver.c b/drivers/staging/dgnc/dgnc_driver.c index b7fd2bf..9387a0e 100644 --- a/drivers/staging/dgnc/dgnc_driver.c +++ b/drivers/staging/dgnc/dgnc_driver.c @@ -572,30 +572,19 @@ static int dgnc_found_board(struct pci_dev *pdev, int id) rc = dgnc_tty_register(brd); if (rc < 0) { - dgnc_tty_uninit(brd); pr_err(DRVSTR ": Can't register tty devices (%d)\n", rc); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; goto failed; } rc = dgnc_finalize_board_init(brd); if (rc < 0) { - dgnc_tty_uninit(brd); pr_err(DRVSTR ": Can't finalize board init (%d)\n", rc); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - goto failed; } rc = dgnc_tty_init(brd); if (rc < 0) { - dgnc_tty_uninit(brd); pr_err(DRVSTR ": Can't init tty devices (%d)\n", rc); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - goto failed; } @@ -629,6 +618,9 @@ static int dgnc_found_board(struct pci_dev *pdev, int id) return 0; failed: + dgnc_tty_uninit(brd); + brd->state = BOARD_FAILED; + brd->dpastatus = BD_NOFEP; return -ENXIO; diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c index 1268aa9..4deae2d 100644 --- a/drivers/staging/dgnc/dgnc_neo.c +++ b/drivers/staging/dgnc/dgnc_neo.c @@ -1436,16 +1436,13 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) spin_lock_irqsave(&ch->ch_lock, flags); /* No data to write to the UART */ - if (ch->ch_w_tail == ch->ch_w_head) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (ch->ch_w_tail == ch->ch_w_head) + goto exit_unlock; /* If port is "stopped", don't send any data to the UART */ - if ((ch->ch_flags & CH_FORCED_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if ((ch->ch_flags & CH_FORCED_STOP) || + (ch->ch_flags & CH_BREAK_SENDING)) + goto exit_unlock; /* * If FIFOs are disabled. Send data directly to txrx register @@ -1486,27 +1483,23 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) ch->ch_w_tail &= WQUEUEMASK; ch->ch_txcount++; } - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; + + goto exit_unlock; } /* * We have to do it this way, because of the EXAR TXFIFO count bug. */ if ((ch->ch_bd->dvid & 0xf0) < UART_XR17E158_DVID) { - if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + goto exit_unlock; len_written = 0; n = readb(&ch->ch_neo_uart->tfifo); - if ((unsigned int) n > ch->ch_t_tlevel) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if ((unsigned int) n > ch->ch_t_tlevel) + goto exit_unlock; n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; } else { @@ -1570,6 +1563,7 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); } +exit_unlock: spin_unlock_irqrestore(&ch->ch_lock, flags); } -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Quentin Lambert <lambert.quentin@gmail.com> To: Lidza Louina <lidza.louina@gmail.com>, Mark Hounschell <markh@compro.net>, Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: kernel-janitors@vger.kernel.org, driverdev-devel@linuxdriverproject.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/3] Staging: dgnc: Use goto for error handling Date: Wed, 11 Mar 2015 14:04:33 +0000 [thread overview] Message-ID: <20150311140433.GA17051@sloth> (raw) This patch introduces goto statments for error handling and in cases where a lock needs to be released. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @candidates exists@ identifier f, label; statement s; position p1, p2, p3; @@ f@p1(...) { ...when any if@p2(...) { ...when any s return@p3 ...; } ...when any } @good1 exists@ identifier candidates.f, candidates.label; statement candidates.s; position candidates.p1, candidates.p2; @@ f@p1(...) { ...when any if(...) { ...when any s return ...; } ...when any if@p2(...) {...} ...when any } @depends on good1@ identifier candidates.f, candidates.label; position candidates.p1, candidates.p3; @@ f@p1(...) { ...when any * return@p3 ...; } Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> --- drivers/staging/dgnc/dgnc_cls.c | 19 +++++++------------ drivers/staging/dgnc/dgnc_driver.c | 14 +++----------- drivers/staging/dgnc/dgnc_neo.c | 30 ++++++++++++------------------ 3 files changed, 22 insertions(+), 41 deletions(-) diff --git a/drivers/staging/dgnc/dgnc_cls.c b/drivers/staging/dgnc/dgnc_cls.c index bedc522..02f19f1 100644 --- a/drivers/staging/dgnc/dgnc_cls.c +++ b/drivers/staging/dgnc/dgnc_cls.c @@ -1029,22 +1029,16 @@ static void cls_copy_data_from_queue_to_uart(struct channel_t *ch) spin_lock_irqsave(&ch->ch_lock, flags); /* No data to write to the UART */ - if (ch->ch_w_tail = ch->ch_w_head) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (ch->ch_w_tail = ch->ch_w_head) + goto exit_unlock; /* If port is "stopped", don't send any data to the UART */ if ((ch->ch_flags & CH_FORCED_STOP) || - (ch->ch_flags & CH_BREAK_SENDING)) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + (ch->ch_flags & CH_BREAK_SENDING)) + goto exit_unlock; - if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + goto exit_unlock; n = 32; @@ -1094,6 +1088,7 @@ static void cls_copy_data_from_queue_to_uart(struct channel_t *ch) if (len_written > 0) ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); +exit_unlock: spin_unlock_irqrestore(&ch->ch_lock, flags); } diff --git a/drivers/staging/dgnc/dgnc_driver.c b/drivers/staging/dgnc/dgnc_driver.c index b7fd2bf..9387a0e 100644 --- a/drivers/staging/dgnc/dgnc_driver.c +++ b/drivers/staging/dgnc/dgnc_driver.c @@ -572,30 +572,19 @@ static int dgnc_found_board(struct pci_dev *pdev, int id) rc = dgnc_tty_register(brd); if (rc < 0) { - dgnc_tty_uninit(brd); pr_err(DRVSTR ": Can't register tty devices (%d)\n", rc); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; goto failed; } rc = dgnc_finalize_board_init(brd); if (rc < 0) { - dgnc_tty_uninit(brd); pr_err(DRVSTR ": Can't finalize board init (%d)\n", rc); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - goto failed; } rc = dgnc_tty_init(brd); if (rc < 0) { - dgnc_tty_uninit(brd); pr_err(DRVSTR ": Can't init tty devices (%d)\n", rc); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - goto failed; } @@ -629,6 +618,9 @@ static int dgnc_found_board(struct pci_dev *pdev, int id) return 0; failed: + dgnc_tty_uninit(brd); + brd->state = BOARD_FAILED; + brd->dpastatus = BD_NOFEP; return -ENXIO; diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c index 1268aa9..4deae2d 100644 --- a/drivers/staging/dgnc/dgnc_neo.c +++ b/drivers/staging/dgnc/dgnc_neo.c @@ -1436,16 +1436,13 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) spin_lock_irqsave(&ch->ch_lock, flags); /* No data to write to the UART */ - if (ch->ch_w_tail = ch->ch_w_head) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (ch->ch_w_tail = ch->ch_w_head) + goto exit_unlock; /* If port is "stopped", don't send any data to the UART */ - if ((ch->ch_flags & CH_FORCED_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if ((ch->ch_flags & CH_FORCED_STOP) || + (ch->ch_flags & CH_BREAK_SENDING)) + goto exit_unlock; /* * If FIFOs are disabled. Send data directly to txrx register @@ -1486,27 +1483,23 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) ch->ch_w_tail &= WQUEUEMASK; ch->ch_txcount++; } - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; + + goto exit_unlock; } /* * We have to do it this way, because of the EXAR TXFIFO count bug. */ if ((ch->ch_bd->dvid & 0xf0) < UART_XR17E158_DVID) { - if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + goto exit_unlock; len_written = 0; n = readb(&ch->ch_neo_uart->tfifo); - if ((unsigned int) n > ch->ch_t_tlevel) { - spin_unlock_irqrestore(&ch->ch_lock, flags); - return; - } + if ((unsigned int) n > ch->ch_t_tlevel) + goto exit_unlock; n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; } else { @@ -1570,6 +1563,7 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); } +exit_unlock: spin_unlock_irqrestore(&ch->ch_lock, flags); } -- 1.9.1
next reply other threads:[~2015-03-11 14:04 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-03-11 14:04 Quentin Lambert [this message] 2015-03-11 14:04 ` [PATCH 2/3] Staging: dgnc: Use goto for error handling Quentin Lambert 2015-03-11 16:37 ` Giedrius Statkevičius 2015-03-11 16:37 ` Giedrius Statkevičius 2015-03-12 9:27 ` Dan Carpenter 2015-03-12 9:27 ` Dan Carpenter 2015-03-12 9:32 ` Quentin Lambert 2015-03-12 9:32 ` Quentin Lambert 2015-03-12 9:54 ` Dan Carpenter 2015-03-12 9:54 ` Dan Carpenter 2015-03-12 9:58 ` Greg Kroah-Hartman 2015-03-12 9:58 ` Greg Kroah-Hartman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20150311140433.GA17051@sloth \ --to=lambert.quentin@gmail.com \ --cc=devel@driverdev.osuosl.org \ --cc=driverdev-devel@linuxdriverproject.org \ --cc=gregkh@linuxfoundation.org \ --cc=kernel-janitors@vger.kernel.org \ --cc=lidza.louina@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=markh@compro.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.