[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad Prabhakar]

From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>

this patch does the following:
1: adds DT node for fixed oscillator.
2: adds DT node entries for ov2659 sensor
3: adds remote-endpoint entry for VPFE.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 Note this patch depends on
 https://patchwork.kernel.org/patch/6000161/
 
 arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index f84d971..195f452 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -106,6 +106,14 @@
 			};
 		};
 	};
+
+	/* fixed 12MHz oscillator */
+	refclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
 };
 
 &am43xx_pinmux {
@@ -404,6 +412,21 @@
 			regulator-always-on;
 		};
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_0: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -423,6 +446,21 @@
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &epwmss0 {
@@ -626,7 +664,7 @@
 
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
@@ -643,7 +681,7 @@
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_0>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
-- 
2.1.0

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad Prabhakar]

From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>

this patch does the following:
1: adds DT node for fixed oscillator.
2: adds DT node entries for ov2659 sensor
3: adds remote-endpoint entry for VPFE.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 Note this patch depends on
 https://patchwork.kernel.org/patch/6000161/
 
 arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index f84d971..195f452 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -106,6 +106,14 @@
 			};
 		};
 	};
+
+	/* fixed 12MHz oscillator */
+	refclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
 };
 
 &am43xx_pinmux {
@@ -404,6 +412,21 @@
 			regulator-always-on;
 		};
 	};
+
+	ov2659 at 30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_0: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -423,6 +446,21 @@
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
+
+	ov2659 at 30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &epwmss0 {
@@ -626,7 +664,7 @@
 
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
@@ -643,7 +681,7 @@
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_0>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
-- 
2.1.0

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Tony Lindgren]

* Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
> 
> this patch does the following:
> 1: adds DT node for fixed oscillator.
> 2: adds DT node entries for ov2659 sensor
> 3: adds remote-endpoint entry for VPFE.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Applying into omap-for-v4.1/dt thanks.

Tony

> ---
>  Note this patch depends on
>  https://patchwork.kernel.org/patch/6000161/
>  
>  arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index f84d971..195f452 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -106,6 +106,14 @@
>  			};
>  		};
>  	};
> +
> +	/* fixed 12MHz oscillator */
> +	refclk: oscillator {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <12000000>;
> +	};
> +
>  };
>  
>  &am43xx_pinmux {
> @@ -404,6 +412,21 @@
>  			regulator-always-on;
>  		};
>  	};
> +
> +	ov2659@30 {
> +		compatible = "ovti,ov2659";
> +		reg = <0x30>;
> +
> +		clocks = <&refclk 0>;
> +		clock-names = "xvclk";
> +
> +		port {
> +			ov2659_0: endpoint {
> +				remote-endpoint = <&vpfe1_ep>;
> +				link-frequencies = /bits/ 64 <70000000>;
> +			};
> +		};
> +	};
>  };
>  
>  &i2c1 {
> @@ -423,6 +446,21 @@
>  		touchscreen-size-x = <1024>;
>  		touchscreen-size-y = <600>;
>  	};
> +
> +	ov2659@30 {
> +		compatible = "ovti,ov2659";
> +		reg = <0x30>;
> +
> +		clocks = <&refclk 0>;
> +		clock-names = "xvclk";
> +
> +		port {
> +			ov2659_1: endpoint {
> +				remote-endpoint = <&vpfe0_ep>;
> +				link-frequencies = /bits/ 64 <70000000>;
> +			};
> +		};
> +	};
>  };
>  
>  &epwmss0 {
> @@ -626,7 +664,7 @@
>  
>  	port {
>  		vpfe0_ep: endpoint {
> -			/* remote-endpoint = <&sensor>; add once we have it */
> +			remote-endpoint = <&ov2659_1>;
>  			ti,am437x-vpfe-interface = <0>;
>  			bus-width = <8>;
>  			hsync-active = <0>;
> @@ -643,7 +681,7 @@
>  
>  	port {
>  		vpfe1_ep: endpoint {
> -			/* remote-endpoint = <&sensor>; add once we have it */
> +			remote-endpoint = <&ov2659_0>;
>  			ti,am437x-vpfe-interface = <0>;
>  			bus-width = <8>;
>  			hsync-active = <0>;
> -- 
> 2.1.0
> 

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Tony Lindgren]

* Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
> 
> this patch does the following:
> 1: adds DT node for fixed oscillator.
> 2: adds DT node entries for ov2659 sensor
> 3: adds remote-endpoint entry for VPFE.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Applying into omap-for-v4.1/dt thanks.

Tony

> ---
>  Note this patch depends on
>  https://patchwork.kernel.org/patch/6000161/
>  
>  arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index f84d971..195f452 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -106,6 +106,14 @@
>  			};
>  		};
>  	};
> +
> +	/* fixed 12MHz oscillator */
> +	refclk: oscillator {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <12000000>;
> +	};
> +
>  };
>  
>  &am43xx_pinmux {
> @@ -404,6 +412,21 @@
>  			regulator-always-on;
>  		};
>  	};
> +
> +	ov2659 at 30 {
> +		compatible = "ovti,ov2659";
> +		reg = <0x30>;
> +
> +		clocks = <&refclk 0>;
> +		clock-names = "xvclk";
> +
> +		port {
> +			ov2659_0: endpoint {
> +				remote-endpoint = <&vpfe1_ep>;
> +				link-frequencies = /bits/ 64 <70000000>;
> +			};
> +		};
> +	};
>  };
>  
>  &i2c1 {
> @@ -423,6 +446,21 @@
>  		touchscreen-size-x = <1024>;
>  		touchscreen-size-y = <600>;
>  	};
> +
> +	ov2659 at 30 {
> +		compatible = "ovti,ov2659";
> +		reg = <0x30>;
> +
> +		clocks = <&refclk 0>;
> +		clock-names = "xvclk";
> +
> +		port {
> +			ov2659_1: endpoint {
> +				remote-endpoint = <&vpfe0_ep>;
> +				link-frequencies = /bits/ 64 <70000000>;
> +			};
> +		};
> +	};
>  };
>  
>  &epwmss0 {
> @@ -626,7 +664,7 @@
>  
>  	port {
>  		vpfe0_ep: endpoint {
> -			/* remote-endpoint = <&sensor>; add once we have it */
> +			remote-endpoint = <&ov2659_1>;
>  			ti,am437x-vpfe-interface = <0>;
>  			bus-width = <8>;
>  			hsync-active = <0>;
> @@ -643,7 +681,7 @@
>  
>  	port {
>  		vpfe1_ep: endpoint {
> -			/* remote-endpoint = <&sensor>; add once we have it */
> +			remote-endpoint = <&ov2659_0>;
>  			ti,am437x-vpfe-interface = <0>;
>  			bus-width = <8>;
>  			hsync-active = <0>;
> -- 
> 2.1.0
> 

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

Hi Tony,

On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
>> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
>>
>> this patch does the following:
>> 1: adds DT node for fixed oscillator.
>> 2: adds DT node entries for ov2659 sensor
>> 3: adds remote-endpoint entry for VPFE.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>
> Applying into omap-for-v4.1/dt thanks.
>
I would like to get this one in via media tree to avoid dependency
as I am still waiting for Acks from DT maintainers for the sensor
driver.

If I can get your Ack on this I'll queue it up along with sensor
driver via media tree.

Cheers,
--Prabhakar Lad

> Tony
>
>> ---
>>  Note this patch depends on
>>  https://patchwork.kernel.org/patch/6000161/
>>
>>  arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++--
>>  1 file changed, 40 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>> index f84d971..195f452 100644
>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>> @@ -106,6 +106,14 @@
>>                       };
>>               };
>>       };
>> +
>> +     /* fixed 12MHz oscillator */
>> +     refclk: oscillator {
>> +             #clock-cells = <0>;
>> +             compatible = "fixed-clock";
>> +             clock-frequency = <12000000>;
>> +     };
>> +
>>  };
>>
>>  &am43xx_pinmux {
>> @@ -404,6 +412,21 @@
>>                       regulator-always-on;
>>               };
>>       };
>> +
>> +     ov2659@30 {
>> +             compatible = "ovti,ov2659";
>> +             reg = <0x30>;
>> +
>> +             clocks = <&refclk 0>;
>> +             clock-names = "xvclk";
>> +
>> +             port {
>> +                     ov2659_0: endpoint {
>> +                             remote-endpoint = <&vpfe1_ep>;
>> +                             link-frequencies = /bits/ 64 <70000000>;
>> +                     };
>> +             };
>> +     };
>>  };
>>
>>  &i2c1 {
>> @@ -423,6 +446,21 @@
>>               touchscreen-size-x = <1024>;
>>               touchscreen-size-y = <600>;
>>       };
>> +
>> +     ov2659@30 {
>> +             compatible = "ovti,ov2659";
>> +             reg = <0x30>;
>> +
>> +             clocks = <&refclk 0>;
>> +             clock-names = "xvclk";
>> +
>> +             port {
>> +                     ov2659_1: endpoint {
>> +                             remote-endpoint = <&vpfe0_ep>;
>> +                             link-frequencies = /bits/ 64 <70000000>;
>> +                     };
>> +             };
>> +     };
>>  };
>>
>>  &epwmss0 {
>> @@ -626,7 +664,7 @@
>>
>>       port {
>>               vpfe0_ep: endpoint {
>> -                     /* remote-endpoint = <&sensor>; add once we have it */
>> +                     remote-endpoint = <&ov2659_1>;
>>                       ti,am437x-vpfe-interface = <0>;
>>                       bus-width = <8>;
>>                       hsync-active = <0>;
>> @@ -643,7 +681,7 @@
>>
>>       port {
>>               vpfe1_ep: endpoint {
>> -                     /* remote-endpoint = <&sensor>; add once we have it */
>> +                     remote-endpoint = <&ov2659_0>;
>>                       ti,am437x-vpfe-interface = <0>;
>>                       bus-width = <8>;
>>                       hsync-active = <0>;
>> --
>> 2.1.0
>>

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

Hi Tony,

On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
>> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
>>
>> this patch does the following:
>> 1: adds DT node for fixed oscillator.
>> 2: adds DT node entries for ov2659 sensor
>> 3: adds remote-endpoint entry for VPFE.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>
> Applying into omap-for-v4.1/dt thanks.
>
I would like to get this one in via media tree to avoid dependency
as I am still waiting for Acks from DT maintainers for the sensor
driver.

If I can get your Ack on this I'll queue it up along with sensor
driver via media tree.

Cheers,
--Prabhakar Lad

> Tony
>
>> ---
>>  Note this patch depends on
>>  https://patchwork.kernel.org/patch/6000161/
>>
>>  arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++--
>>  1 file changed, 40 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>> index f84d971..195f452 100644
>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>> @@ -106,6 +106,14 @@
>>                       };
>>               };
>>       };
>> +
>> +     /* fixed 12MHz oscillator */
>> +     refclk: oscillator {
>> +             #clock-cells = <0>;
>> +             compatible = "fixed-clock";
>> +             clock-frequency = <12000000>;
>> +     };
>> +
>>  };
>>
>>  &am43xx_pinmux {
>> @@ -404,6 +412,21 @@
>>                       regulator-always-on;
>>               };
>>       };
>> +
>> +     ov2659 at 30 {
>> +             compatible = "ovti,ov2659";
>> +             reg = <0x30>;
>> +
>> +             clocks = <&refclk 0>;
>> +             clock-names = "xvclk";
>> +
>> +             port {
>> +                     ov2659_0: endpoint {
>> +                             remote-endpoint = <&vpfe1_ep>;
>> +                             link-frequencies = /bits/ 64 <70000000>;
>> +                     };
>> +             };
>> +     };
>>  };
>>
>>  &i2c1 {
>> @@ -423,6 +446,21 @@
>>               touchscreen-size-x = <1024>;
>>               touchscreen-size-y = <600>;
>>       };
>> +
>> +     ov2659 at 30 {
>> +             compatible = "ovti,ov2659";
>> +             reg = <0x30>;
>> +
>> +             clocks = <&refclk 0>;
>> +             clock-names = "xvclk";
>> +
>> +             port {
>> +                     ov2659_1: endpoint {
>> +                             remote-endpoint = <&vpfe0_ep>;
>> +                             link-frequencies = /bits/ 64 <70000000>;
>> +                     };
>> +             };
>> +     };
>>  };
>>
>>  &epwmss0 {
>> @@ -626,7 +664,7 @@
>>
>>       port {
>>               vpfe0_ep: endpoint {
>> -                     /* remote-endpoint = <&sensor>; add once we have it */
>> +                     remote-endpoint = <&ov2659_1>;
>>                       ti,am437x-vpfe-interface = <0>;
>>                       bus-width = <8>;
>>                       hsync-active = <0>;
>> @@ -643,7 +681,7 @@
>>
>>       port {
>>               vpfe1_ep: endpoint {
>> -                     /* remote-endpoint = <&sensor>; add once we have it */
>> +                     remote-endpoint = <&ov2659_0>;
>>                       ti,am437x-vpfe-interface = <0>;
>>                       bus-width = <8>;
>>                       hsync-active = <0>;
>> --
>> 2.1.0
>>

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Tony Lindgren]

* Lad, Prabhakar <prabhakar.csengg@gmail.com> [150316 18:20]:
> Hi Tony,
> 
> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> > * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
> >> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
> >>
> >> this patch does the following:
> >> 1: adds DT node for fixed oscillator.
> >> 2: adds DT node entries for ov2659 sensor
> >> 3: adds remote-endpoint entry for VPFE.
> >>
> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> >
> > Applying into omap-for-v4.1/dt thanks.
> >
> I would like to get this one in via media tree to avoid dependency
> as I am still waiting for Acks from DT maintainers for the sensor
> driver.

OK dropping it.
 
> If I can get your Ack on this I'll queue it up along with sensor
> driver via media tree.

Sorry the chances are too big for pointless merge conflicts with
these files with constant patching going on.

Please just resend this patch alone again to me later on once the
driver changes are merged into Linux next and on their way to the
mainline kernel.

Regards,

Tony

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Tony Lindgren]

* Lad, Prabhakar <prabhakar.csengg@gmail.com> [150316 18:20]:
> Hi Tony,
> 
> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
> > * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
> >> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
> >>
> >> this patch does the following:
> >> 1: adds DT node for fixed oscillator.
> >> 2: adds DT node entries for ov2659 sensor
> >> 3: adds remote-endpoint entry for VPFE.
> >>
> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> >
> > Applying into omap-for-v4.1/dt thanks.
> >
> I would like to get this one in via media tree to avoid dependency
> as I am still waiting for Acks from DT maintainers for the sensor
> driver.

OK dropping it.
 
> If I can get your Ack on this I'll queue it up along with sensor
> driver via media tree.

Sorry the chances are too big for pointless merge conflicts with
these files with constant patching going on.

Please just resend this patch alone again to me later on once the
driver changes are merged into Linux next and on their way to the
mainline kernel.

Regards,

Tony

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

Hi Tony,

On Tue, Mar 17, 2015 at 2:23 AM, Tony Lindgren <tony@atomide.com> wrote:
> * Lad, Prabhakar <prabhakar.csengg@gmail.com> [150316 18:20]:
>> Hi Tony,
>>
>> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
>> > * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
>> >> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
>> >>
>> >> this patch does the following:
>> >> 1: adds DT node for fixed oscillator.
>> >> 2: adds DT node entries for ov2659 sensor
>> >> 3: adds remote-endpoint entry for VPFE.
>> >>
>> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>> >
>> > Applying into omap-for-v4.1/dt thanks.
>> >
>> I would like to get this one in via media tree to avoid dependency
>> as I am still waiting for Acks from DT maintainers for the sensor
>> driver.
>
> OK dropping it.
>
>> If I can get your Ack on this I'll queue it up along with sensor
>> driver via media tree.
>
> Sorry the chances are too big for pointless merge conflicts with
> these files with constant patching going on.
>
> Please just resend this patch alone again to me later on once the
> driver changes are merged into Linux next and on their way to the
> mainline kernel.
>
the sensor driver is now present in linux-next and the same patch
applies cleanly, can you pick up the same or do you want me to
resend the patch ?

Cheers,
--Prabhakar Lad

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

Hi Tony,

On Tue, Mar 17, 2015 at 2:23 AM, Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> wrote:
> * Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [150316 18:20]:
>> Hi Tony,
>>
>> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> wrote:
>> > * Lad Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [150312 16:38]:
>> >> From: "Lad, Prabhakar" <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> >>
>> >> this patch does the following:
>> >> 1: adds DT node for fixed oscillator.
>> >> 2: adds DT node entries for ov2659 sensor
>> >> 3: adds remote-endpoint entry for VPFE.
>> >>
>> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> >
>> > Applying into omap-for-v4.1/dt thanks.
>> >
>> I would like to get this one in via media tree to avoid dependency
>> as I am still waiting for Acks from DT maintainers for the sensor
>> driver.
>
> OK dropping it.
>
>> If I can get your Ack on this I'll queue it up along with sensor
>> driver via media tree.
>
> Sorry the chances are too big for pointless merge conflicts with
> these files with constant patching going on.
>
> Please just resend this patch alone again to me later on once the
> driver changes are merged into Linux next and on their way to the
> mainline kernel.
>
the sensor driver is now present in linux-next and the same patch
applies cleanly, can you pick up the same or do you want me to
resend the patch ?

Cheers,
--Prabhakar Lad
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

Hi Tony,

On Tue, Mar 17, 2015 at 2:23 AM, Tony Lindgren <tony@atomide.com> wrote:
> * Lad, Prabhakar <prabhakar.csengg@gmail.com> [150316 18:20]:
>> Hi Tony,
>>
>> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
>> > * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
>> >> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
>> >>
>> >> this patch does the following:
>> >> 1: adds DT node for fixed oscillator.
>> >> 2: adds DT node entries for ov2659 sensor
>> >> 3: adds remote-endpoint entry for VPFE.
>> >>
>> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>> >
>> > Applying into omap-for-v4.1/dt thanks.
>> >
>> I would like to get this one in via media tree to avoid dependency
>> as I am still waiting for Acks from DT maintainers for the sensor
>> driver.
>
> OK dropping it.
>
>> If I can get your Ack on this I'll queue it up along with sensor
>> driver via media tree.
>
> Sorry the chances are too big for pointless merge conflicts with
> these files with constant patching going on.
>
> Please just resend this patch alone again to me later on once the
> driver changes are merged into Linux next and on their way to the
> mainline kernel.
>
the sensor driver is now present in linux-next and the same patch
applies cleanly, can you pick up the same or do you want me to
resend the patch ?

Cheers,
--Prabhakar Lad

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

On Fri, Apr 10, 2015 at 9:22 PM, Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
> Hi Tony,
>
> On Tue, Mar 17, 2015 at 2:23 AM, Tony Lindgren <tony@atomide.com> wrote:
>> * Lad, Prabhakar <prabhakar.csengg@gmail.com> [150316 18:20]:
>>> Hi Tony,
>>>
>>> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
>>> > * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
>>> >> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
>>> >>
>>> >> this patch does the following:
>>> >> 1: adds DT node for fixed oscillator.
>>> >> 2: adds DT node entries for ov2659 sensor
>>> >> 3: adds remote-endpoint entry for VPFE.
>>> >>
>>> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>> >
>>> > Applying into omap-for-v4.1/dt thanks.
>>> >
>>> I would like to get this one in via media tree to avoid dependency
>>> as I am still waiting for Acks from DT maintainers for the sensor
>>> driver.
>>
>> OK dropping it.
>>
>>> If I can get your Ack on this I'll queue it up along with sensor
>>> driver via media tree.
>>
>> Sorry the chances are too big for pointless merge conflicts with
>> these files with constant patching going on.
>>
>> Please just resend this patch alone again to me later on once the
>> driver changes are merged into Linux next and on their way to the
>> mainline kernel.
>>
> the sensor driver is now present in linux-next and the same patch
> applies cleanly, can you pick up the same or do you want me to
> resend the patch ?
>
Ping...

Cheers,
--Prabhakar Lad

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

On Fri, Apr 10, 2015 at 9:22 PM, Lad, Prabhakar
<prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Hi Tony,
>
> On Tue, Mar 17, 2015 at 2:23 AM, Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> wrote:
>> * Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [150316 18:20]:
>>> Hi Tony,
>>>
>>> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> wrote:
>>> > * Lad Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [150312 16:38]:
>>> >> From: "Lad, Prabhakar" <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>> >>
>>> >> this patch does the following:
>>> >> 1: adds DT node for fixed oscillator.
>>> >> 2: adds DT node entries for ov2659 sensor
>>> >> 3: adds remote-endpoint entry for VPFE.
>>> >>
>>> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>> >
>>> > Applying into omap-for-v4.1/dt thanks.
>>> >
>>> I would like to get this one in via media tree to avoid dependency
>>> as I am still waiting for Acks from DT maintainers for the sensor
>>> driver.
>>
>> OK dropping it.
>>
>>> If I can get your Ack on this I'll queue it up along with sensor
>>> driver via media tree.
>>
>> Sorry the chances are too big for pointless merge conflicts with
>> these files with constant patching going on.
>>
>> Please just resend this patch alone again to me later on once the
>> driver changes are merged into Linux next and on their way to the
>> mainline kernel.
>>
> the sensor driver is now present in linux-next and the same patch
> applies cleanly, can you pick up the same or do you want me to
> resend the patch ?
>
Ping...

Cheers,
--Prabhakar Lad
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Lad, Prabhakar]

On Fri, Apr 10, 2015 at 9:22 PM, Lad, Prabhakar
<prabhakar.csengg@gmail.com> wrote:
> Hi Tony,
>
> On Tue, Mar 17, 2015 at 2:23 AM, Tony Lindgren <tony@atomide.com> wrote:
>> * Lad, Prabhakar <prabhakar.csengg@gmail.com> [150316 18:20]:
>>> Hi Tony,
>>>
>>> On Mon, Mar 16, 2015 at 10:17 PM, Tony Lindgren <tony@atomide.com> wrote:
>>> > * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
>>> >> From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
>>> >>
>>> >> this patch does the following:
>>> >> 1: adds DT node for fixed oscillator.
>>> >> 2: adds DT node entries for ov2659 sensor
>>> >> 3: adds remote-endpoint entry for VPFE.
>>> >>
>>> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>> >
>>> > Applying into omap-for-v4.1/dt thanks.
>>> >
>>> I would like to get this one in via media tree to avoid dependency
>>> as I am still waiting for Acks from DT maintainers for the sensor
>>> driver.
>>
>> OK dropping it.
>>
>>> If I can get your Ack on this I'll queue it up along with sensor
>>> driver via media tree.
>>
>> Sorry the chances are too big for pointless merge conflicts with
>> these files with constant patching going on.
>>
>> Please just resend this patch alone again to me later on once the
>> driver changes are merged into Linux next and on their way to the
>> mainline kernel.
>>
> the sensor driver is now present in linux-next and the same patch
> applies cleanly, can you pick up the same or do you want me to
> resend the patch ?
>
Ping...

Cheers,
--Prabhakar Lad

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [150316 15:22]:
> * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
> > From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
> > 
> > this patch does the following:
> > 1: adds DT node for fixed oscillator.
> > 2: adds DT node entries for ov2659 sensor
> > 3: adds remote-endpoint entry for VPFE.
> > 
> > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> 
> Applying into omap-for-v4.1/dt thanks.

Hmm looks like I somehow dropped this one, sorry. Applying into
omap-for-v4.2/dt now thanks.

Regards,

Tony

Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Tony Lindgren]

* Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> [150316 15:22]:
> * Lad Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [150312 16:38]:
> > From: "Lad, Prabhakar" <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > 
> > this patch does the following:
> > 1: adds DT node for fixed oscillator.
> > 2: adds DT node entries for ov2659 sensor
> > 3: adds remote-endpoint entry for VPFE.
> > 
> > Signed-off-by: Lad, Prabhakar <prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Applying into omap-for-v4.1/dt thanks.

Hmm looks like I somehow dropped this one, sorry. Applying into
omap-for-v4.2/dt now thanks.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [150316 15:22]:
> * Lad Prabhakar <prabhakar.csengg@gmail.com> [150312 16:38]:
> > From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
> > 
> > this patch does the following:
> > 1: adds DT node for fixed oscillator.
> > 2: adds DT node entries for ov2659 sensor
> > 3: adds remote-endpoint entry for VPFE.
> > 
> > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> 
> Applying into omap-for-v4.1/dt thanks.

Hmm looks like I somehow dropped this one, sorry. Applying into
omap-for-v4.2/dt now thanks.

Regards,

Tony