[PATCH v1] Mediatek SCPSYS power domain support

[PATCH v1] Mediatek SCPSYS power domain support

[Sascha Hauer]

This series adds support for the MediaTek SCPSYS unit.

The SCPSYS unit handles several power management related tasks such
as thermal measurement, DVFS, interrupt filter and low level sleep
control.

The initial support only contains the generic power domain handling.
This is needed to turn on power to the different power domains.

The driver is quite straight forward now. Due to the lack of a better
place I have put it to drivers/soc/mediatek. As the SCPSYS unit has
several other tasks that also do not fit into some specific subsystem
this probably is a good place for this driver.

Please review, any input welcome.

Sascha

changes since RFC:

- add a commit log to driver patch
- drop manipulating infracfg registers for now, can be added (properly)
  later
- Add warning messages when errors occur
- add NULL pointer check for kmalloc
- Enable all power domains when PM is disabled to allow consumers to work

[PATCH v1] Mediatek SCPSYS power domain support

[Sascha Hauer]

This series adds support for the MediaTek SCPSYS unit.

The SCPSYS unit handles several power management related tasks such
as thermal measurement, DVFS, interrupt filter and low level sleep
control.

The initial support only contains the generic power domain handling.
This is needed to turn on power to the different power domains.

The driver is quite straight forward now. Due to the lack of a better
place I have put it to drivers/soc/mediatek. As the SCPSYS unit has
several other tasks that also do not fit into some specific subsystem
this probably is a good place for this driver.

Please review, any input welcome.

Sascha

changes since RFC:

- add a commit log to driver patch
- drop manipulating infracfg registers for now, can be added (properly)
  later
- Add warning messages when errors occur
- add NULL pointer check for kmalloc
- Enable all power domains when PM is disabled to allow consumers to work

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v1] Mediatek SCPSYS power domain support

[Sascha Hauer]

This series adds support for the MediaTek SCPSYS unit.

The SCPSYS unit handles several power management related tasks such
as thermal measurement, DVFS, interrupt filter and low level sleep
control.

The initial support only contains the generic power domain handling.
This is needed to turn on power to the different power domains.

The driver is quite straight forward now. Due to the lack of a better
place I have put it to drivers/soc/mediatek. As the SCPSYS unit has
several other tasks that also do not fit into some specific subsystem
this probably is a good place for this driver.

Please review, any input welcome.

Sascha

changes since RFC:

- add a commit log to driver patch
- drop manipulating infracfg registers for now, can be added (properly)
  later
- Add warning messages when errors occur
- add NULL pointer check for kmalloc
- Enable all power domains when PM is disabled to allow consumers to work

[PATCH 1/4] dt-bindings: soc: Add documentation for the MediaTek SCPSYS unit

[Sascha Hauer]

This adds documentation for the MediaTek SCPSYS unit found in MT8173 SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/soc/mediatek/scpsys.txt    | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/scpsys.txt

diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
new file mode 100644
index 0000000..4764a03
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -0,0 +1,32 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power_domain.txt. It provides the power domains defined in
+include/dt-bindings/power/mt8173-power.h.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+
+Example:
+
+	scpsys: scpsys@10006000 {
+		#power-domain-cells = <1>;
+		compatible = "mediatek,mt8173-scpsys";
+		reg = <0 0x10006000 0 0x1000>;
+	};
+
+Example consumer:
+
+	afe: mt8173-afe-pcm@11220000 {
+		compatible = "mediatek,mt8173-afe-pcm";
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+	};
-- 
2.1.4

[PATCH 1/4] dt-bindings: soc: Add documentation for the MediaTek SCPSYS unit

[Sascha Hauer]

This adds documentation for the MediaTek SCPSYS unit found in MT8173 SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/soc/mediatek/scpsys.txt    | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/scpsys.txt

diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
new file mode 100644
index 0000000..4764a03
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -0,0 +1,32 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power_domain.txt. It provides the power domains defined in
+include/dt-bindings/power/mt8173-power.h.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+
+Example:
+
+	scpsys: scpsys at 10006000 {
+		#power-domain-cells = <1>;
+		compatible = "mediatek,mt8173-scpsys";
+		reg = <0 0x10006000 0 0x1000>;
+	};
+
+Example consumer:
+
+	afe: mt8173-afe-pcm at 11220000 {
+		compatible = "mediatek,mt8173-afe-pcm";
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+	};
-- 
2.1.4

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

This adds a power domain driver for the Mediatek SCPSYS unit.

The System Control Processor System (SCPSYS) has several power
management related tasks in the system. The tasks include thermal
measurement, dynamic voltage frequency scaling (DVFS), interrupt
filter and lowlevel sleep control. The System Power Manager (SPM)
inside the SCPSYS is for the MTCMOS power domain control.

For now this driver only adds power domain support, the more
advanced features are not yet supported. The driver implements
the generic PM domain device tree bindings, the first user will
most likely be the Mediatek AFE audio driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/soc/mediatek/Kconfig             |   6 +
 drivers/soc/mediatek/Makefile            |   1 +
 drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
 include/dt-bindings/power/mt8173-power.h |  15 ++
 4 files changed, 367 insertions(+)
 create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
 create mode 100644 include/dt-bindings/power/mt8173-power.h

diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index bcdb22d..1d34819 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
 	  Say yes here to add support for MediaTek PMIC Wrapper found
 	  on different MediaTek SoCs. The PMIC wrapper is a proprietary
 	  hardware to connect the PMIC.
+
+config MTK_SCPSYS
+	tristate "MediaTek SCPSYS Support"
+	help
+	  Say yes here to add support for the MediaTek SCPSYS power domain
+	  driver.
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index ecaf4de..ce88693 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
+obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
new file mode 100644
index 0000000..a72ac51
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/pm_domain.h>
+#include <linux/delay.h>
+#include <dt-bindings/power/mt8173-power.h>
+#include <linux/mfd/syscon.h>
+
+#define SPM_VDE_PWR_CON			0x0210
+#define SPM_MFG_PWR_CON			0x0214
+#define SPM_VEN_PWR_CON			0x0230
+#define SPM_ISP_PWR_CON			0x0238
+#define SPM_DIS_PWR_CON			0x023c
+#define SPM_VEN2_PWR_CON		0x0298
+#define SPM_AUDIO_PWR_CON		0x029c
+#define SPM_MFG_2D_PWR_CON		0x02c0
+#define SPM_MFG_ASYNC_PWR_CON		0x02c4
+#define SPM_USB_PWR_CON			0x02cc
+#define SPM_PWR_STATUS			0x060c
+#define SPM_PWR_STATUS_2ND		0x0610
+
+#define PWR_RST_B_BIT			BIT(0)
+#define PWR_ISO_BIT			BIT(1)
+#define PWR_ON_BIT			BIT(2)
+#define PWR_ON_2ND_BIT			BIT(3)
+#define PWR_CLK_DIS_BIT			BIT(4)
+
+#define DIS_PWR_STA_MASK		BIT(3)
+#define MFG_PWR_STA_MASK		BIT(4)
+#define ISP_PWR_STA_MASK		BIT(5)
+#define VDE_PWR_STA_MASK		BIT(7)
+#define VEN2_PWR_STA_MASK		BIT(20)
+#define VEN_PWR_STA_MASK		BIT(21)
+#define MFG_2D_PWR_STA_MASK		BIT(22)
+#define MFG_ASYNC_PWR_STA_MASK		BIT(23)
+#define AUDIO_PWR_STA_MASK		BIT(24)
+#define USB_PWR_STA_MASK		BIT(25)
+
+struct scp_domain_data {
+	const char *name;
+	u32 sta_mask;
+	int ctl_offs;
+	u32 sram_pdn_bits;
+	u32 sram_pdn_ack_bits;
+	int id;
+};
+
+static struct scp_domain_data scp_domain_data[] = {
+	{
+		.id = MT8173_POWER_DOMAIN_VDE,
+		.name = "vde",
+		.sta_mask = VDE_PWR_STA_MASK,
+		.ctl_offs = SPM_VDE_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG,
+		.name = "mfg",
+		.sta_mask = MFG_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_PWR_CON,
+		.sram_pdn_bits = GENMASK(13, 8),
+		.sram_pdn_ack_bits = GENMASK(21, 16),
+	}, {
+		.id = MT8173_POWER_DOMAIN_VEN,
+		.name = "ven",
+		.sta_mask = VEN_PWR_STA_MASK,
+		.ctl_offs = SPM_VEN_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_ISP,
+		.name = "isp",
+		.sta_mask = ISP_PWR_STA_MASK,
+		.ctl_offs = SPM_ISP_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_DIS,
+		.name = "dis",
+		.sta_mask = DIS_PWR_STA_MASK,
+		.ctl_offs = SPM_DIS_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_VEN2,
+		.name = "ven2",
+		.sta_mask = VEN2_PWR_STA_MASK,
+		.ctl_offs = SPM_VEN2_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_AUDIO,
+		.name = "audio",
+		.sta_mask = AUDIO_PWR_STA_MASK,
+		.ctl_offs = SPM_AUDIO_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG_2D,
+		.name = "mfg_2d",
+		.sta_mask = MFG_2D_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_2D_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG_ASYNC,
+		.name = "mfg_async",
+		.sta_mask = MFG_ASYNC_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_ASYNC_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = 0,
+	}, {
+		.id = MT8173_POWER_DOMAIN_USB,
+		.name = "usb",
+		.sta_mask = USB_PWR_STA_MASK,
+		.ctl_offs = SPM_USB_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	},
+};
+
+#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
+
+struct scp;
+
+struct scp_domain {
+	struct generic_pm_domain pmd;
+	struct scp_domain_data *data;
+	struct scp *scp;
+};
+
+struct scp {
+	struct scp_domain domains[NUM_DOMAINS];
+	struct generic_pm_domain *pmd[NUM_DOMAINS];
+	struct genpd_onecell_data pd_data;
+	struct device *dev;
+	void __iomem *base;
+};
+
+static int scpsys_power_on(struct generic_pm_domain *genpd)
+{
+	struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
+	struct scp *scp = scpd->scp;
+	struct scp_domain_data *data = scpd->data;
+	unsigned long expired;
+	void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
+	u32 sram_pdn_ack = data->sram_pdn_ack_bits;
+	u32 val;
+	int ret;
+
+	val = readl(ctl_addr);
+	val |= PWR_ON_BIT;
+	writel(val, ctl_addr);
+	val |= PWR_ON_2ND_BIT;
+	writel(val, ctl_addr);
+
+	/* wait until PWR_ACK = 1 */
+	expired = jiffies + HZ;
+	while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
+			!(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	val &= ~PWR_CLK_DIS_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ISO_BIT;
+	writel(val, ctl_addr);
+
+	val |= PWR_RST_B_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* wait until SRAM_PDN_ACK all 0 */
+	expired = jiffies + HZ;
+	while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	return 0;
+out:
+	dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
+
+	return ret;
+}
+
+static int scpsys_power_off(struct generic_pm_domain *genpd)
+{
+	struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
+	struct scp *scp = scpd->scp;
+	struct scp_domain_data *data = scpd->data;
+	unsigned long expired;
+	void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
+	u32 sram_pdn_ack = data->sram_pdn_ack_bits;
+	u32 val;
+	int ret;
+
+	val = readl(ctl_addr);
+	val |= data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* wait until SRAM_PDN_ACK all 1 */
+	expired = jiffies + HZ;
+	while ((readl(ctl_addr) & sram_pdn_ack) != sram_pdn_ack) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	val |= PWR_ISO_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_RST_B_BIT;
+	writel(val, ctl_addr);
+
+	val |= PWR_CLK_DIS_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ON_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ON_2ND_BIT;
+	writel(val, ctl_addr);
+
+	/* wait until PWR_ACK = 0 */
+	expired = jiffies + HZ;
+	while ((readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
+			(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	return 0;
+
+out:
+	dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
+
+	return ret;
+}
+
+static int scpsys_probe(struct platform_device *pdev)
+{
+	struct genpd_onecell_data *pd_data;
+	struct resource *res;
+	int i;
+	struct scp *scp;
+
+	scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL);
+	if (!scp)
+		return -ENOMEM;
+
+	scp->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	scp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(scp->base))
+		return PTR_ERR(scp->base);
+
+	pd_data = &scp->pd_data;
+
+	pd_data->domains = scp->pmd;
+	pd_data->num_domains = NUM_DOMAINS;
+
+	for (i = 0; i < NUM_DOMAINS; i++) {
+		struct scp_domain *scpd = &scp->domains[i];
+		struct generic_pm_domain *pmd = &scpd->pmd;
+
+		scp->pmd[i] = pmd;
+		scpd->data = &scp_domain_data[i];
+		scpd->scp = scp;
+
+		pmd->name = scp_domain_data[i].name;
+		pmd->power_off = scpsys_power_off;
+		pmd->power_on = scpsys_power_on;
+		pmd->power_off_latency_ns = 20000;
+		pmd->power_on_latency_ns = 20000;
+
+		pd_data->domains[i] = pmd;
+		pm_genpd_init(pmd, NULL, 1);
+
+		/*
+		 * If PM is disabled turn on all domains by default so that
+		 * consumers can work.
+		 */
+		if (!IS_ENABLED(CONFIG_PM))
+			pmd->power_on(pmd);
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, pd_data);
+}
+
+static struct of_device_id of_scpsys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt8173-scpsys",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_scpsys_match_tbl);
+
+static struct platform_driver scpsys_drv = {
+	.driver = {
+		.name = "mtk-scpsys",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(of_scpsys_match_tbl),
+	},
+	.probe = scpsys_probe,
+};
+
+module_platform_driver(scpsys_drv);
+
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_DESCRIPTION("MediaTek MT8173 scpsys driver");
+MODULE_LICENSE("GPL");
diff --git a/include/dt-bindings/power/mt8173-power.h b/include/dt-bindings/power/mt8173-power.h
new file mode 100644
index 0000000..88715f2
--- /dev/null
+++ b/include/dt-bindings/power/mt8173-power.h
@@ -0,0 +1,15 @@
+#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H
+#define _DT_BINDINGS_POWER_MT8183_POWER_H
+
+#define MT8173_POWER_DOMAIN_VDE		0
+#define MT8173_POWER_DOMAIN_MFG		1
+#define MT8173_POWER_DOMAIN_VEN		2
+#define MT8173_POWER_DOMAIN_ISP		3
+#define MT8173_POWER_DOMAIN_DIS		4
+#define MT8173_POWER_DOMAIN_VEN2	5
+#define MT8173_POWER_DOMAIN_AUDIO	6
+#define MT8173_POWER_DOMAIN_MFG_2D	7
+#define MT8173_POWER_DOMAIN_MFG_ASYNC	8
+#define MT8173_POWER_DOMAIN_USB		9
+
+#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
-- 
2.1.4

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

This adds a power domain driver for the Mediatek SCPSYS unit.

The System Control Processor System (SCPSYS) has several power
management related tasks in the system. The tasks include thermal
measurement, dynamic voltage frequency scaling (DVFS), interrupt
filter and lowlevel sleep control. The System Power Manager (SPM)
inside the SCPSYS is for the MTCMOS power domain control.

For now this driver only adds power domain support, the more
advanced features are not yet supported. The driver implements
the generic PM domain device tree bindings, the first user will
most likely be the Mediatek AFE audio driver.

Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/soc/mediatek/Kconfig             |   6 +
 drivers/soc/mediatek/Makefile            |   1 +
 drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
 include/dt-bindings/power/mt8173-power.h |  15 ++
 4 files changed, 367 insertions(+)
 create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
 create mode 100644 include/dt-bindings/power/mt8173-power.h

diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index bcdb22d..1d34819 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
 	  Say yes here to add support for MediaTek PMIC Wrapper found
 	  on different MediaTek SoCs. The PMIC wrapper is a proprietary
 	  hardware to connect the PMIC.
+
+config MTK_SCPSYS
+	tristate "MediaTek SCPSYS Support"
+	help
+	  Say yes here to add support for the MediaTek SCPSYS power domain
+	  driver.
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index ecaf4de..ce88693 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
+obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
new file mode 100644
index 0000000..a72ac51
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/pm_domain.h>
+#include <linux/delay.h>
+#include <dt-bindings/power/mt8173-power.h>
+#include <linux/mfd/syscon.h>
+
+#define SPM_VDE_PWR_CON			0x0210
+#define SPM_MFG_PWR_CON			0x0214
+#define SPM_VEN_PWR_CON			0x0230
+#define SPM_ISP_PWR_CON			0x0238
+#define SPM_DIS_PWR_CON			0x023c
+#define SPM_VEN2_PWR_CON		0x0298
+#define SPM_AUDIO_PWR_CON		0x029c
+#define SPM_MFG_2D_PWR_CON		0x02c0
+#define SPM_MFG_ASYNC_PWR_CON		0x02c4
+#define SPM_USB_PWR_CON			0x02cc
+#define SPM_PWR_STATUS			0x060c
+#define SPM_PWR_STATUS_2ND		0x0610
+
+#define PWR_RST_B_BIT			BIT(0)
+#define PWR_ISO_BIT			BIT(1)
+#define PWR_ON_BIT			BIT(2)
+#define PWR_ON_2ND_BIT			BIT(3)
+#define PWR_CLK_DIS_BIT			BIT(4)
+
+#define DIS_PWR_STA_MASK		BIT(3)
+#define MFG_PWR_STA_MASK		BIT(4)
+#define ISP_PWR_STA_MASK		BIT(5)
+#define VDE_PWR_STA_MASK		BIT(7)
+#define VEN2_PWR_STA_MASK		BIT(20)
+#define VEN_PWR_STA_MASK		BIT(21)
+#define MFG_2D_PWR_STA_MASK		BIT(22)
+#define MFG_ASYNC_PWR_STA_MASK		BIT(23)
+#define AUDIO_PWR_STA_MASK		BIT(24)
+#define USB_PWR_STA_MASK		BIT(25)
+
+struct scp_domain_data {
+	const char *name;
+	u32 sta_mask;
+	int ctl_offs;
+	u32 sram_pdn_bits;
+	u32 sram_pdn_ack_bits;
+	int id;
+};
+
+static struct scp_domain_data scp_domain_data[] = {
+	{
+		.id = MT8173_POWER_DOMAIN_VDE,
+		.name = "vde",
+		.sta_mask = VDE_PWR_STA_MASK,
+		.ctl_offs = SPM_VDE_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG,
+		.name = "mfg",
+		.sta_mask = MFG_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_PWR_CON,
+		.sram_pdn_bits = GENMASK(13, 8),
+		.sram_pdn_ack_bits = GENMASK(21, 16),
+	}, {
+		.id = MT8173_POWER_DOMAIN_VEN,
+		.name = "ven",
+		.sta_mask = VEN_PWR_STA_MASK,
+		.ctl_offs = SPM_VEN_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_ISP,
+		.name = "isp",
+		.sta_mask = ISP_PWR_STA_MASK,
+		.ctl_offs = SPM_ISP_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_DIS,
+		.name = "dis",
+		.sta_mask = DIS_PWR_STA_MASK,
+		.ctl_offs = SPM_DIS_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_VEN2,
+		.name = "ven2",
+		.sta_mask = VEN2_PWR_STA_MASK,
+		.ctl_offs = SPM_VEN2_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_AUDIO,
+		.name = "audio",
+		.sta_mask = AUDIO_PWR_STA_MASK,
+		.ctl_offs = SPM_AUDIO_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG_2D,
+		.name = "mfg_2d",
+		.sta_mask = MFG_2D_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_2D_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG_ASYNC,
+		.name = "mfg_async",
+		.sta_mask = MFG_ASYNC_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_ASYNC_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = 0,
+	}, {
+		.id = MT8173_POWER_DOMAIN_USB,
+		.name = "usb",
+		.sta_mask = USB_PWR_STA_MASK,
+		.ctl_offs = SPM_USB_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	},
+};
+
+#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
+
+struct scp;
+
+struct scp_domain {
+	struct generic_pm_domain pmd;
+	struct scp_domain_data *data;
+	struct scp *scp;
+};
+
+struct scp {
+	struct scp_domain domains[NUM_DOMAINS];
+	struct generic_pm_domain *pmd[NUM_DOMAINS];
+	struct genpd_onecell_data pd_data;
+	struct device *dev;
+	void __iomem *base;
+};
+
+static int scpsys_power_on(struct generic_pm_domain *genpd)
+{
+	struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
+	struct scp *scp = scpd->scp;
+	struct scp_domain_data *data = scpd->data;
+	unsigned long expired;
+	void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
+	u32 sram_pdn_ack = data->sram_pdn_ack_bits;
+	u32 val;
+	int ret;
+
+	val = readl(ctl_addr);
+	val |= PWR_ON_BIT;
+	writel(val, ctl_addr);
+	val |= PWR_ON_2ND_BIT;
+	writel(val, ctl_addr);
+
+	/* wait until PWR_ACK = 1 */
+	expired = jiffies + HZ;
+	while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
+			!(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	val &= ~PWR_CLK_DIS_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ISO_BIT;
+	writel(val, ctl_addr);
+
+	val |= PWR_RST_B_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* wait until SRAM_PDN_ACK all 0 */
+	expired = jiffies + HZ;
+	while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	return 0;
+out:
+	dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
+
+	return ret;
+}
+
+static int scpsys_power_off(struct generic_pm_domain *genpd)
+{
+	struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
+	struct scp *scp = scpd->scp;
+	struct scp_domain_data *data = scpd->data;
+	unsigned long expired;
+	void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
+	u32 sram_pdn_ack = data->sram_pdn_ack_bits;
+	u32 val;
+	int ret;
+
+	val = readl(ctl_addr);
+	val |= data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* wait until SRAM_PDN_ACK all 1 */
+	expired = jiffies + HZ;
+	while ((readl(ctl_addr) & sram_pdn_ack) != sram_pdn_ack) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	val |= PWR_ISO_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_RST_B_BIT;
+	writel(val, ctl_addr);
+
+	val |= PWR_CLK_DIS_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ON_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ON_2ND_BIT;
+	writel(val, ctl_addr);
+
+	/* wait until PWR_ACK = 0 */
+	expired = jiffies + HZ;
+	while ((readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
+			(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	return 0;
+
+out:
+	dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
+
+	return ret;
+}
+
+static int scpsys_probe(struct platform_device *pdev)
+{
+	struct genpd_onecell_data *pd_data;
+	struct resource *res;
+	int i;
+	struct scp *scp;
+
+	scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL);
+	if (!scp)
+		return -ENOMEM;
+
+	scp->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	scp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(scp->base))
+		return PTR_ERR(scp->base);
+
+	pd_data = &scp->pd_data;
+
+	pd_data->domains = scp->pmd;
+	pd_data->num_domains = NUM_DOMAINS;
+
+	for (i = 0; i < NUM_DOMAINS; i++) {
+		struct scp_domain *scpd = &scp->domains[i];
+		struct generic_pm_domain *pmd = &scpd->pmd;
+
+		scp->pmd[i] = pmd;
+		scpd->data = &scp_domain_data[i];
+		scpd->scp = scp;
+
+		pmd->name = scp_domain_data[i].name;
+		pmd->power_off = scpsys_power_off;
+		pmd->power_on = scpsys_power_on;
+		pmd->power_off_latency_ns = 20000;
+		pmd->power_on_latency_ns = 20000;
+
+		pd_data->domains[i] = pmd;
+		pm_genpd_init(pmd, NULL, 1);
+
+		/*
+		 * If PM is disabled turn on all domains by default so that
+		 * consumers can work.
+		 */
+		if (!IS_ENABLED(CONFIG_PM))
+			pmd->power_on(pmd);
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, pd_data);
+}
+
+static struct of_device_id of_scpsys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt8173-scpsys",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_scpsys_match_tbl);
+
+static struct platform_driver scpsys_drv = {
+	.driver = {
+		.name = "mtk-scpsys",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(of_scpsys_match_tbl),
+	},
+	.probe = scpsys_probe,
+};
+
+module_platform_driver(scpsys_drv);
+
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_DESCRIPTION("MediaTek MT8173 scpsys driver");
+MODULE_LICENSE("GPL");
diff --git a/include/dt-bindings/power/mt8173-power.h b/include/dt-bindings/power/mt8173-power.h
new file mode 100644
index 0000000..88715f2
--- /dev/null
+++ b/include/dt-bindings/power/mt8173-power.h
@@ -0,0 +1,15 @@
+#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H
+#define _DT_BINDINGS_POWER_MT8183_POWER_H
+
+#define MT8173_POWER_DOMAIN_VDE		0
+#define MT8173_POWER_DOMAIN_MFG		1
+#define MT8173_POWER_DOMAIN_VEN		2
+#define MT8173_POWER_DOMAIN_ISP		3
+#define MT8173_POWER_DOMAIN_DIS		4
+#define MT8173_POWER_DOMAIN_VEN2	5
+#define MT8173_POWER_DOMAIN_AUDIO	6
+#define MT8173_POWER_DOMAIN_MFG_2D	7
+#define MT8173_POWER_DOMAIN_MFG_ASYNC	8
+#define MT8173_POWER_DOMAIN_USB		9
+
+#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

This adds a power domain driver for the Mediatek SCPSYS unit.

The System Control Processor System (SCPSYS) has several power
management related tasks in the system. The tasks include thermal
measurement, dynamic voltage frequency scaling (DVFS), interrupt
filter and lowlevel sleep control. The System Power Manager (SPM)
inside the SCPSYS is for the MTCMOS power domain control.

For now this driver only adds power domain support, the more
advanced features are not yet supported. The driver implements
the generic PM domain device tree bindings, the first user will
most likely be the Mediatek AFE audio driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/soc/mediatek/Kconfig             |   6 +
 drivers/soc/mediatek/Makefile            |   1 +
 drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
 include/dt-bindings/power/mt8173-power.h |  15 ++
 4 files changed, 367 insertions(+)
 create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
 create mode 100644 include/dt-bindings/power/mt8173-power.h

diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index bcdb22d..1d34819 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
 	  Say yes here to add support for MediaTek PMIC Wrapper found
 	  on different MediaTek SoCs. The PMIC wrapper is a proprietary
 	  hardware to connect the PMIC.
+
+config MTK_SCPSYS
+	tristate "MediaTek SCPSYS Support"
+	help
+	  Say yes here to add support for the MediaTek SCPSYS power domain
+	  driver.
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index ecaf4de..ce88693 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
+obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
new file mode 100644
index 0000000..a72ac51
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/pm_domain.h>
+#include <linux/delay.h>
+#include <dt-bindings/power/mt8173-power.h>
+#include <linux/mfd/syscon.h>
+
+#define SPM_VDE_PWR_CON			0x0210
+#define SPM_MFG_PWR_CON			0x0214
+#define SPM_VEN_PWR_CON			0x0230
+#define SPM_ISP_PWR_CON			0x0238
+#define SPM_DIS_PWR_CON			0x023c
+#define SPM_VEN2_PWR_CON		0x0298
+#define SPM_AUDIO_PWR_CON		0x029c
+#define SPM_MFG_2D_PWR_CON		0x02c0
+#define SPM_MFG_ASYNC_PWR_CON		0x02c4
+#define SPM_USB_PWR_CON			0x02cc
+#define SPM_PWR_STATUS			0x060c
+#define SPM_PWR_STATUS_2ND		0x0610
+
+#define PWR_RST_B_BIT			BIT(0)
+#define PWR_ISO_BIT			BIT(1)
+#define PWR_ON_BIT			BIT(2)
+#define PWR_ON_2ND_BIT			BIT(3)
+#define PWR_CLK_DIS_BIT			BIT(4)
+
+#define DIS_PWR_STA_MASK		BIT(3)
+#define MFG_PWR_STA_MASK		BIT(4)
+#define ISP_PWR_STA_MASK		BIT(5)
+#define VDE_PWR_STA_MASK		BIT(7)
+#define VEN2_PWR_STA_MASK		BIT(20)
+#define VEN_PWR_STA_MASK		BIT(21)
+#define MFG_2D_PWR_STA_MASK		BIT(22)
+#define MFG_ASYNC_PWR_STA_MASK		BIT(23)
+#define AUDIO_PWR_STA_MASK		BIT(24)
+#define USB_PWR_STA_MASK		BIT(25)
+
+struct scp_domain_data {
+	const char *name;
+	u32 sta_mask;
+	int ctl_offs;
+	u32 sram_pdn_bits;
+	u32 sram_pdn_ack_bits;
+	int id;
+};
+
+static struct scp_domain_data scp_domain_data[] = {
+	{
+		.id = MT8173_POWER_DOMAIN_VDE,
+		.name = "vde",
+		.sta_mask = VDE_PWR_STA_MASK,
+		.ctl_offs = SPM_VDE_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG,
+		.name = "mfg",
+		.sta_mask = MFG_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_PWR_CON,
+		.sram_pdn_bits = GENMASK(13, 8),
+		.sram_pdn_ack_bits = GENMASK(21, 16),
+	}, {
+		.id = MT8173_POWER_DOMAIN_VEN,
+		.name = "ven",
+		.sta_mask = VEN_PWR_STA_MASK,
+		.ctl_offs = SPM_VEN_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_ISP,
+		.name = "isp",
+		.sta_mask = ISP_PWR_STA_MASK,
+		.ctl_offs = SPM_ISP_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_DIS,
+		.name = "dis",
+		.sta_mask = DIS_PWR_STA_MASK,
+		.ctl_offs = SPM_DIS_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_VEN2,
+		.name = "ven2",
+		.sta_mask = VEN2_PWR_STA_MASK,
+		.ctl_offs = SPM_VEN2_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_AUDIO,
+		.name = "audio",
+		.sta_mask = AUDIO_PWR_STA_MASK,
+		.ctl_offs = SPM_AUDIO_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG_2D,
+		.name = "mfg_2d",
+		.sta_mask = MFG_2D_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_2D_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+	}, {
+		.id = MT8173_POWER_DOMAIN_MFG_ASYNC,
+		.name = "mfg_async",
+		.sta_mask = MFG_ASYNC_PWR_STA_MASK,
+		.ctl_offs = SPM_MFG_ASYNC_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = 0,
+	}, {
+		.id = MT8173_POWER_DOMAIN_USB,
+		.name = "usb",
+		.sta_mask = USB_PWR_STA_MASK,
+		.ctl_offs = SPM_USB_PWR_CON,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+	},
+};
+
+#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
+
+struct scp;
+
+struct scp_domain {
+	struct generic_pm_domain pmd;
+	struct scp_domain_data *data;
+	struct scp *scp;
+};
+
+struct scp {
+	struct scp_domain domains[NUM_DOMAINS];
+	struct generic_pm_domain *pmd[NUM_DOMAINS];
+	struct genpd_onecell_data pd_data;
+	struct device *dev;
+	void __iomem *base;
+};
+
+static int scpsys_power_on(struct generic_pm_domain *genpd)
+{
+	struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
+	struct scp *scp = scpd->scp;
+	struct scp_domain_data *data = scpd->data;
+	unsigned long expired;
+	void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
+	u32 sram_pdn_ack = data->sram_pdn_ack_bits;
+	u32 val;
+	int ret;
+
+	val = readl(ctl_addr);
+	val |= PWR_ON_BIT;
+	writel(val, ctl_addr);
+	val |= PWR_ON_2ND_BIT;
+	writel(val, ctl_addr);
+
+	/* wait until PWR_ACK = 1 */
+	expired = jiffies + HZ;
+	while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
+			!(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	val &= ~PWR_CLK_DIS_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ISO_BIT;
+	writel(val, ctl_addr);
+
+	val |= PWR_RST_B_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* wait until SRAM_PDN_ACK all 0 */
+	expired = jiffies + HZ;
+	while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	return 0;
+out:
+	dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
+
+	return ret;
+}
+
+static int scpsys_power_off(struct generic_pm_domain *genpd)
+{
+	struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
+	struct scp *scp = scpd->scp;
+	struct scp_domain_data *data = scpd->data;
+	unsigned long expired;
+	void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
+	u32 sram_pdn_ack = data->sram_pdn_ack_bits;
+	u32 val;
+	int ret;
+
+	val = readl(ctl_addr);
+	val |= data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* wait until SRAM_PDN_ACK all 1 */
+	expired = jiffies + HZ;
+	while ((readl(ctl_addr) & sram_pdn_ack) != sram_pdn_ack) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	val |= PWR_ISO_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_RST_B_BIT;
+	writel(val, ctl_addr);
+
+	val |= PWR_CLK_DIS_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ON_BIT;
+	writel(val, ctl_addr);
+
+	val &= ~PWR_ON_2ND_BIT;
+	writel(val, ctl_addr);
+
+	/* wait until PWR_ACK = 0 */
+	expired = jiffies + HZ;
+	while ((readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
+			(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
+		cpu_relax();
+		if (time_after(jiffies, expired)) {
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	return 0;
+
+out:
+	dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
+
+	return ret;
+}
+
+static int scpsys_probe(struct platform_device *pdev)
+{
+	struct genpd_onecell_data *pd_data;
+	struct resource *res;
+	int i;
+	struct scp *scp;
+
+	scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL);
+	if (!scp)
+		return -ENOMEM;
+
+	scp->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	scp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(scp->base))
+		return PTR_ERR(scp->base);
+
+	pd_data = &scp->pd_data;
+
+	pd_data->domains = scp->pmd;
+	pd_data->num_domains = NUM_DOMAINS;
+
+	for (i = 0; i < NUM_DOMAINS; i++) {
+		struct scp_domain *scpd = &scp->domains[i];
+		struct generic_pm_domain *pmd = &scpd->pmd;
+
+		scp->pmd[i] = pmd;
+		scpd->data = &scp_domain_data[i];
+		scpd->scp = scp;
+
+		pmd->name = scp_domain_data[i].name;
+		pmd->power_off = scpsys_power_off;
+		pmd->power_on = scpsys_power_on;
+		pmd->power_off_latency_ns = 20000;
+		pmd->power_on_latency_ns = 20000;
+
+		pd_data->domains[i] = pmd;
+		pm_genpd_init(pmd, NULL, 1);
+
+		/*
+		 * If PM is disabled turn on all domains by default so that
+		 * consumers can work.
+		 */
+		if (!IS_ENABLED(CONFIG_PM))
+			pmd->power_on(pmd);
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, pd_data);
+}
+
+static struct of_device_id of_scpsys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt8173-scpsys",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_scpsys_match_tbl);
+
+static struct platform_driver scpsys_drv = {
+	.driver = {
+		.name = "mtk-scpsys",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(of_scpsys_match_tbl),
+	},
+	.probe = scpsys_probe,
+};
+
+module_platform_driver(scpsys_drv);
+
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_DESCRIPTION("MediaTek MT8173 scpsys driver");
+MODULE_LICENSE("GPL");
diff --git a/include/dt-bindings/power/mt8173-power.h b/include/dt-bindings/power/mt8173-power.h
new file mode 100644
index 0000000..88715f2
--- /dev/null
+++ b/include/dt-bindings/power/mt8173-power.h
@@ -0,0 +1,15 @@
+#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H
+#define _DT_BINDINGS_POWER_MT8183_POWER_H
+
+#define MT8173_POWER_DOMAIN_VDE		0
+#define MT8173_POWER_DOMAIN_MFG		1
+#define MT8173_POWER_DOMAIN_VEN		2
+#define MT8173_POWER_DOMAIN_ISP		3
+#define MT8173_POWER_DOMAIN_DIS		4
+#define MT8173_POWER_DOMAIN_VEN2	5
+#define MT8173_POWER_DOMAIN_AUDIO	6
+#define MT8173_POWER_DOMAIN_MFG_2D	7
+#define MT8173_POWER_DOMAIN_MFG_ASYNC	8
+#define MT8173_POWER_DOMAIN_USB		9
+
+#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
-- 
2.1.4

[PATCH 3/4] ARM64: MediaTek: Add generic pm domain support

[Sascha Hauer]

Enable support for generic power domains in the config.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b8e973..aef77d2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -174,6 +174,7 @@ config ARCH_FSL_LS2085A
 config ARCH_MEDIATEK
 	bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
 	select ARM_GIC
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
 
-- 
2.1.4

[PATCH 3/4] ARM64: MediaTek: Add generic pm domain support

[Sascha Hauer]

Enable support for generic power domains in the config.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b8e973..aef77d2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -174,6 +174,7 @@ config ARCH_FSL_LS2085A
 config ARCH_MEDIATEK
 	bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
 	select ARM_GIC
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
 
-- 
2.1.4

[PATCH 4/4] ARM64: MediaTek MT8173: Add SCPSYS device node

[Sascha Hauer]

This adds the SCPSYS device node to the MT8173 dtsi file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 8554ec3..9fa64ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -105,6 +105,12 @@
 		compatible = "simple-bus";
 		ranges;
 
+		scpsys: scpsys@10006000 {
+			compatible = "mediatek,mt8173-scpsys";
+			#power-domain-cells = <1>;
+			reg = <0 0x10006000 0 0x1000>;
+		};
+
 		sysirq: intpol-controller@10200620 {
 			compatible = "mediatek,mt8173-sysirq",
 					"mediatek,mt6577-sysirq";
-- 
2.1.4

[PATCH 4/4] ARM64: MediaTek MT8173: Add SCPSYS device node

[Sascha Hauer]

This adds the SCPSYS device node to the MT8173 dtsi file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 8554ec3..9fa64ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -105,6 +105,12 @@
 		compatible = "simple-bus";
 		ranges;
 
+		scpsys: scpsys at 10006000 {
+			compatible = "mediatek,mt8173-scpsys";
+			#power-domain-cells = <1>;
+			reg = <0 0x10006000 0 0x1000>;
+		};
+
 		sysirq: intpol-controller at 10200620 {
 			compatible = "mediatek,mt8173-sysirq",
 					"mediatek,mt6577-sysirq";
-- 
2.1.4

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Paul Bolle]

On Tue, 2015-03-10 at 16:41 +0100, Sascha Hauer wrote:
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -0,0 +1,345 @@
> +/*
> + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */

This states the license is GPL v2.

> +MODULE_LICENSE("GPL");

So you probably want
    MODULE_LICENSE("GPL v2");

here.


Paul Bolle

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Paul Bolle]

On Tue, 2015-03-10 at 16:41 +0100, Sascha Hauer wrote:
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -0,0 +1,345 @@
> +/*
> + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */

This states the license is GPL v2.

> +MODULE_LICENSE("GPL");

So you probably want
    MODULE_LICENSE("GPL v2");

here.


Paul Bolle

Re: [PATCH v1] Mediatek SCPSYS power domain support

[Sascha Hauer]

Kevin,

since you have reviewed the first version of this series, could you give
a reviewed-by or acked-by?

Thanks
 Sascha

On Tue, Mar 10, 2015 at 04:40:59PM +0100, Sascha Hauer wrote:
> This series adds support for the MediaTek SCPSYS unit.
> 
> The SCPSYS unit handles several power management related tasks such
> as thermal measurement, DVFS, interrupt filter and low level sleep
> control.
> 
> The initial support only contains the generic power domain handling.
> This is needed to turn on power to the different power domains.
> 
> The driver is quite straight forward now. Due to the lack of a better
> place I have put it to drivers/soc/mediatek. As the SCPSYS unit has
> several other tasks that also do not fit into some specific subsystem
> this probably is a good place for this driver.
> 
> Please review, any input welcome.
> 
> Sascha
> 
> changes since RFC:
> 
> - add a commit log to driver patch
> - drop manipulating infracfg registers for now, can be added (properly)
>   later
> - Add warning messages when errors occur
> - add NULL pointer check for kmalloc
> - Enable all power domains when PM is disabled to allow consumers to work
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Kevin Hilman]

Hi Sascha,

Sascha Hauer <s.hauer@pengutronix.de> writes:

> This adds a power domain driver for the Mediatek SCPSYS unit.
>
> The System Control Processor System (SCPSYS) has several power
> management related tasks in the system. The tasks include thermal
> measurement, dynamic voltage frequency scaling (DVFS), interrupt
> filter and lowlevel sleep control. The System Power Manager (SPM)
> inside the SCPSYS is for the MTCMOS power domain control.
>
> For now this driver only adds power domain support, the more
> advanced features are not yet supported. The driver implements
> the generic PM domain device tree bindings, the first user will
> most likely be the Mediatek AFE audio driver.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Sorry for the lag, was travelling last week at ELC and not keeping up
with reviews.

This version looks pretty good to me, but had one minor
comment/question...

[...]

> +#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
> +
> +struct scp;
> +
> +struct scp_domain {
> +	struct generic_pm_domain pmd;
> +	struct scp_domain_data *data;
> +	struct scp *scp;
> +};
> +
> +struct scp {
> +	struct scp_domain domains[NUM_DOMAINS];
> +	struct generic_pm_domain *pmd[NUM_DOMAINS];

Why is this genpd pointer needed?  It's just a pointer to the
.domains.pmd[i] anyways, and IMO makes the code a bit hard to follow.

Kevin

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Kevin Hilman]

Hi Sascha,

Sascha Hauer <s.hauer@pengutronix.de> writes:

> This adds a power domain driver for the Mediatek SCPSYS unit.
>
> The System Control Processor System (SCPSYS) has several power
> management related tasks in the system. The tasks include thermal
> measurement, dynamic voltage frequency scaling (DVFS), interrupt
> filter and lowlevel sleep control. The System Power Manager (SPM)
> inside the SCPSYS is for the MTCMOS power domain control.
>
> For now this driver only adds power domain support, the more
> advanced features are not yet supported. The driver implements
> the generic PM domain device tree bindings, the first user will
> most likely be the Mediatek AFE audio driver.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Sorry for the lag, was travelling last week at ELC and not keeping up
with reviews.

This version looks pretty good to me, but had one minor
comment/question...

[...]

> +#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
> +
> +struct scp;
> +
> +struct scp_domain {
> +	struct generic_pm_domain pmd;
> +	struct scp_domain_data *data;
> +	struct scp *scp;
> +};
> +
> +struct scp {
> +	struct scp_domain domains[NUM_DOMAINS];
> +	struct generic_pm_domain *pmd[NUM_DOMAINS];

Why is this genpd pointer needed?  It's just a pointer to the
.domains.pmd[i] anyways, and IMO makes the code a bit hard to follow.

Kevin

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Tue, Mar 31, 2015 at 09:27:53AM -0700, Kevin Hilman wrote:
> Hi Sascha,
> 
> Sascha Hauer <s.hauer@pengutronix.de> writes:
> 
> > This adds a power domain driver for the Mediatek SCPSYS unit.
> >
> > The System Control Processor System (SCPSYS) has several power
> > management related tasks in the system. The tasks include thermal
> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
> > filter and lowlevel sleep control. The System Power Manager (SPM)
> > inside the SCPSYS is for the MTCMOS power domain control.
> >
> > For now this driver only adds power domain support, the more
> > advanced features are not yet supported. The driver implements
> > the generic PM domain device tree bindings, the first user will
> > most likely be the Mediatek AFE audio driver.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> 
> Sorry for the lag, was travelling last week at ELC and not keeping up
> with reviews.
> 
> This version looks pretty good to me, but had one minor
> comment/question...
> 
> [...]
> 
> > +#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
> > +
> > +struct scp;
> > +
> > +struct scp_domain {
> > +	struct generic_pm_domain pmd;
> > +	struct scp_domain_data *data;
> > +	struct scp *scp;
> > +};
> > +
> > +struct scp {
> > +	struct scp_domain domains[NUM_DOMAINS];
> > +	struct generic_pm_domain *pmd[NUM_DOMAINS];
> 
> Why is this genpd pointer needed?  It's just a pointer to the
> .domains.pmd[i] anyways, and IMO makes the code a bit hard to follow.

The driver itself does not need the genpd pointer, but
of_genpd_add_provider_onecell() expects an array of pointers to struct
generic_pm_domain.

I can allocate the array of pointers separately and remove the pmd field
from struct scp to make this a bit more clearer.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Tue, Mar 31, 2015 at 09:27:53AM -0700, Kevin Hilman wrote:
> Hi Sascha,
> 
> Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> writes:
> 
> > This adds a power domain driver for the Mediatek SCPSYS unit.
> >
> > The System Control Processor System (SCPSYS) has several power
> > management related tasks in the system. The tasks include thermal
> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
> > filter and lowlevel sleep control. The System Power Manager (SPM)
> > inside the SCPSYS is for the MTCMOS power domain control.
> >
> > For now this driver only adds power domain support, the more
> > advanced features are not yet supported. The driver implements
> > the generic PM domain device tree bindings, the first user will
> > most likely be the Mediatek AFE audio driver.
> >
> > Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> 
> Sorry for the lag, was travelling last week at ELC and not keeping up
> with reviews.
> 
> This version looks pretty good to me, but had one minor
> comment/question...
> 
> [...]
> 
> > +#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
> > +
> > +struct scp;
> > +
> > +struct scp_domain {
> > +	struct generic_pm_domain pmd;
> > +	struct scp_domain_data *data;
> > +	struct scp *scp;
> > +};
> > +
> > +struct scp {
> > +	struct scp_domain domains[NUM_DOMAINS];
> > +	struct generic_pm_domain *pmd[NUM_DOMAINS];
> 
> Why is this genpd pointer needed?  It's just a pointer to the
> .domains.pmd[i] anyways, and IMO makes the code a bit hard to follow.

The driver itself does not need the genpd pointer, but
of_genpd_add_provider_onecell() expects an array of pointers to struct
generic_pm_domain.

I can allocate the array of pointers separately and remove the pmd field
from struct scp to make this a bit more clearer.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Tue, Mar 31, 2015 at 09:27:53AM -0700, Kevin Hilman wrote:
> Hi Sascha,
> 
> Sascha Hauer <s.hauer@pengutronix.de> writes:
> 
> > This adds a power domain driver for the Mediatek SCPSYS unit.
> >
> > The System Control Processor System (SCPSYS) has several power
> > management related tasks in the system. The tasks include thermal
> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
> > filter and lowlevel sleep control. The System Power Manager (SPM)
> > inside the SCPSYS is for the MTCMOS power domain control.
> >
> > For now this driver only adds power domain support, the more
> > advanced features are not yet supported. The driver implements
> > the generic PM domain device tree bindings, the first user will
> > most likely be the Mediatek AFE audio driver.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> 
> Sorry for the lag, was travelling last week at ELC and not keeping up
> with reviews.
> 
> This version looks pretty good to me, but had one minor
> comment/question...
> 
> [...]
> 
> > +#define NUM_DOMAINS	ARRAY_SIZE(scp_domain_data)
> > +
> > +struct scp;
> > +
> > +struct scp_domain {
> > +	struct generic_pm_domain pmd;
> > +	struct scp_domain_data *data;
> > +	struct scp *scp;
> > +};
> > +
> > +struct scp {
> > +	struct scp_domain domains[NUM_DOMAINS];
> > +	struct generic_pm_domain *pmd[NUM_DOMAINS];
> 
> Why is this genpd pointer needed?  It's just a pointer to the
> .domains.pmd[i] anyways, and IMO makes the code a bit hard to follow.

The driver itself does not need the genpd pointer, but
of_genpd_add_provider_onecell() expects an array of pointers to struct
generic_pm_domain.

I can allocate the array of pointers separately and remove the pmd field
from struct scp to make this a bit more clearer.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
> This adds a power domain driver for the Mediatek SCPSYS unit.
>
> The System Control Processor System (SCPSYS) has several power
> management related tasks in the system. The tasks include thermal
> measurement, dynamic voltage frequency scaling (DVFS), interrupt
> filter and lowlevel sleep control. The System Power Manager (SPM)
> inside the SCPSYS is for the MTCMOS power domain control.
>
> For now this driver only adds power domain support, the more
> advanced features are not yet supported. The driver implements
> the generic PM domain device tree bindings, the first user will
> most likely be the Mediatek AFE audio driver.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/soc/mediatek/Kconfig             |   6 +
>  drivers/soc/mediatek/Makefile            |   1 +
>  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
>  include/dt-bindings/power/mt8173-power.h |  15 ++
>  4 files changed, 367 insertions(+)
>  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
>  create mode 100644 include/dt-bindings/power/mt8173-power.h
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index bcdb22d..1d34819 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
>           Say yes here to add support for MediaTek PMIC Wrapper found
>           on different MediaTek SoCs. The PMIC wrapper is a proprietary
>           hardware to connect the PMIC.
> +
> +config MTK_SCPSYS
> +       tristate "MediaTek SCPSYS Support"
> +       help
> +         Say yes here to add support for the MediaTek SCPSYS power domain
> +         driver.
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index ecaf4de..ce88693 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1 +1,2 @@
>  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> new file mode 100644
> index 0000000..a72ac51
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -0,0 +1,345 @@
> +/*
> + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/pm_domain.h>
> +#include <linux/delay.h>
> +#include <dt-bindings/power/mt8173-power.h>
> +#include <linux/mfd/syscon.h>
> +
> +#define SPM_VDE_PWR_CON                        0x0210
> +#define SPM_MFG_PWR_CON                        0x0214
> +#define SPM_VEN_PWR_CON                        0x0230
> +#define SPM_ISP_PWR_CON                        0x0238
> +#define SPM_DIS_PWR_CON                        0x023c
> +#define SPM_VEN2_PWR_CON               0x0298
> +#define SPM_AUDIO_PWR_CON              0x029c
> +#define SPM_MFG_2D_PWR_CON             0x02c0
> +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
> +#define SPM_USB_PWR_CON                        0x02cc
> +#define SPM_PWR_STATUS                 0x060c
> +#define SPM_PWR_STATUS_2ND             0x0610
> +
> +#define PWR_RST_B_BIT                  BIT(0)
> +#define PWR_ISO_BIT                    BIT(1)
> +#define PWR_ON_BIT                     BIT(2)
> +#define PWR_ON_2ND_BIT                 BIT(3)
> +#define PWR_CLK_DIS_BIT                        BIT(4)
> +
> +#define DIS_PWR_STA_MASK               BIT(3)
> +#define MFG_PWR_STA_MASK               BIT(4)
> +#define ISP_PWR_STA_MASK               BIT(5)
> +#define VDE_PWR_STA_MASK               BIT(7)
> +#define VEN2_PWR_STA_MASK              BIT(20)
> +#define VEN_PWR_STA_MASK               BIT(21)
> +#define MFG_2D_PWR_STA_MASK            BIT(22)
> +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
> +#define AUDIO_PWR_STA_MASK             BIT(24)
> +#define USB_PWR_STA_MASK               BIT(25)
> +
> +struct scp_domain_data {
> +       const char *name;
> +       u32 sta_mask;
> +       int ctl_offs;
> +       u32 sram_pdn_bits;
> +       u32 sram_pdn_ack_bits;
> +       int id;
> +};
> +
> +static struct scp_domain_data scp_domain_data[] = {
> +       {
> +               .id = MT8173_POWER_DOMAIN_VDE,
> +               .name = "vde",
> +               .sta_mask = VDE_PWR_STA_MASK,
> +               .ctl_offs = SPM_VDE_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(12, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG,
> +               .name = "mfg",
> +               .sta_mask = MFG_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_PWR_CON,
> +               .sram_pdn_bits = GENMASK(13, 8),
> +               .sram_pdn_ack_bits = GENMASK(21, 16),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_VEN,
> +               .name = "ven",
> +               .sta_mask = VEN_PWR_STA_MASK,
> +               .ctl_offs = SPM_VEN_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_ISP,
> +               .name = "isp",
> +               .sta_mask = ISP_PWR_STA_MASK,
> +               .ctl_offs = SPM_ISP_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(13, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_DIS,
> +               .name = "dis",
> +               .sta_mask = DIS_PWR_STA_MASK,
> +               .ctl_offs = SPM_DIS_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(12, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_VEN2,
> +               .name = "ven2",
> +               .sta_mask = VEN2_PWR_STA_MASK,
> +               .ctl_offs = SPM_VEN2_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_AUDIO,
> +               .name = "audio",
> +               .sta_mask = AUDIO_PWR_STA_MASK,
> +               .ctl_offs = SPM_AUDIO_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG_2D,
> +               .name = "mfg_2d",
> +               .sta_mask = MFG_2D_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_2D_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(13, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
> +               .name = "mfg_async",
> +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = 0,
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_USB,
> +               .name = "usb",
> +               .sta_mask = USB_PWR_STA_MASK,
> +               .ctl_offs = SPM_USB_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       },
> +};
> +
> +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
> +
> +struct scp;
> +
> +struct scp_domain {
> +       struct generic_pm_domain pmd;
> +       struct scp_domain_data *data;
> +       struct scp *scp;
> +};
> +
> +struct scp {
> +       struct scp_domain domains[NUM_DOMAINS];
> +       struct generic_pm_domain *pmd[NUM_DOMAINS];
> +       struct genpd_onecell_data pd_data;
> +       struct device *dev;
> +       void __iomem *base;
> +};
> +
> +static int scpsys_power_on(struct generic_pm_domain *genpd)
> +{
> +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> +       struct scp *scp = scpd->scp;
> +       struct scp_domain_data *data = scpd->data;
> +       unsigned long expired;
> +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> +       u32 val;
> +       int ret;
> +
> +       val = readl(ctl_addr);
> +       val |= PWR_ON_BIT;
> +       writel(val, ctl_addr);
> +       val |= PWR_ON_2ND_BIT;
> +       writel(val, ctl_addr);
> +
> +       /* wait until PWR_ACK = 1 */
> +       expired = jiffies + HZ;
> +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       val &= ~PWR_CLK_DIS_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ISO_BIT;
> +       writel(val, ctl_addr);
> +
> +       val |= PWR_RST_B_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~data->sram_pdn_bits;
> +       writel(val, ctl_addr);
> +
> +       /* wait until SRAM_PDN_ACK all 0 */
> +       expired = jiffies + HZ;
> +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {

I think "sram_pdn_ack &&" was added accidently here. It is always
bigger then zero.

> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       return 0;
> +out:
> +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
> +
> +       return ret;
> +}
> +
> +static int scpsys_power_off(struct generic_pm_domain *genpd)
> +{
> +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> +       struct scp *scp = scpd->scp;
> +       struct scp_domain_data *data = scpd->data;
> +       unsigned long expired;
> +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> +       u32 val;
> +       int ret;
> +
> +       val = readl(ctl_addr);
> +       val |= data->sram_pdn_bits;
> +       writel(val, ctl_addr);
> +
> +       /* wait until SRAM_PDN_ACK all 1 */
> +       expired = jiffies + HZ;
> +       while ((readl(ctl_addr) & sram_pdn_ack) != sram_pdn_ack) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       val |= PWR_ISO_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_RST_B_BIT;
> +       writel(val, ctl_addr);
> +
> +       val |= PWR_CLK_DIS_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ON_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ON_2ND_BIT;
> +       writel(val, ctl_addr);
> +
> +       /* wait until PWR_ACK = 0 */
> +       expired = jiffies + HZ;
> +       while ((readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> +                       (readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       return 0;
> +
> +out:
> +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);

typo, this shoudl be "power off domain"

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
> This adds a power domain driver for the Mediatek SCPSYS unit.
>
> The System Control Processor System (SCPSYS) has several power
> management related tasks in the system. The tasks include thermal
> measurement, dynamic voltage frequency scaling (DVFS), interrupt
> filter and lowlevel sleep control. The System Power Manager (SPM)
> inside the SCPSYS is for the MTCMOS power domain control.
>
> For now this driver only adds power domain support, the more
> advanced features are not yet supported. The driver implements
> the generic PM domain device tree bindings, the first user will
> most likely be the Mediatek AFE audio driver.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/soc/mediatek/Kconfig             |   6 +
>  drivers/soc/mediatek/Makefile            |   1 +
>  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
>  include/dt-bindings/power/mt8173-power.h |  15 ++
>  4 files changed, 367 insertions(+)
>  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
>  create mode 100644 include/dt-bindings/power/mt8173-power.h
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index bcdb22d..1d34819 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
>           Say yes here to add support for MediaTek PMIC Wrapper found
>           on different MediaTek SoCs. The PMIC wrapper is a proprietary
>           hardware to connect the PMIC.
> +
> +config MTK_SCPSYS
> +       tristate "MediaTek SCPSYS Support"
> +       help
> +         Say yes here to add support for the MediaTek SCPSYS power domain
> +         driver.
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index ecaf4de..ce88693 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1 +1,2 @@
>  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> new file mode 100644
> index 0000000..a72ac51
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -0,0 +1,345 @@
> +/*
> + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/pm_domain.h>
> +#include <linux/delay.h>
> +#include <dt-bindings/power/mt8173-power.h>
> +#include <linux/mfd/syscon.h>
> +
> +#define SPM_VDE_PWR_CON                        0x0210
> +#define SPM_MFG_PWR_CON                        0x0214
> +#define SPM_VEN_PWR_CON                        0x0230
> +#define SPM_ISP_PWR_CON                        0x0238
> +#define SPM_DIS_PWR_CON                        0x023c
> +#define SPM_VEN2_PWR_CON               0x0298
> +#define SPM_AUDIO_PWR_CON              0x029c
> +#define SPM_MFG_2D_PWR_CON             0x02c0
> +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
> +#define SPM_USB_PWR_CON                        0x02cc
> +#define SPM_PWR_STATUS                 0x060c
> +#define SPM_PWR_STATUS_2ND             0x0610
> +
> +#define PWR_RST_B_BIT                  BIT(0)
> +#define PWR_ISO_BIT                    BIT(1)
> +#define PWR_ON_BIT                     BIT(2)
> +#define PWR_ON_2ND_BIT                 BIT(3)
> +#define PWR_CLK_DIS_BIT                        BIT(4)
> +
> +#define DIS_PWR_STA_MASK               BIT(3)
> +#define MFG_PWR_STA_MASK               BIT(4)
> +#define ISP_PWR_STA_MASK               BIT(5)
> +#define VDE_PWR_STA_MASK               BIT(7)
> +#define VEN2_PWR_STA_MASK              BIT(20)
> +#define VEN_PWR_STA_MASK               BIT(21)
> +#define MFG_2D_PWR_STA_MASK            BIT(22)
> +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
> +#define AUDIO_PWR_STA_MASK             BIT(24)
> +#define USB_PWR_STA_MASK               BIT(25)
> +
> +struct scp_domain_data {
> +       const char *name;
> +       u32 sta_mask;
> +       int ctl_offs;
> +       u32 sram_pdn_bits;
> +       u32 sram_pdn_ack_bits;
> +       int id;
> +};
> +
> +static struct scp_domain_data scp_domain_data[] = {
> +       {
> +               .id = MT8173_POWER_DOMAIN_VDE,
> +               .name = "vde",
> +               .sta_mask = VDE_PWR_STA_MASK,
> +               .ctl_offs = SPM_VDE_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(12, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG,
> +               .name = "mfg",
> +               .sta_mask = MFG_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_PWR_CON,
> +               .sram_pdn_bits = GENMASK(13, 8),
> +               .sram_pdn_ack_bits = GENMASK(21, 16),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_VEN,
> +               .name = "ven",
> +               .sta_mask = VEN_PWR_STA_MASK,
> +               .ctl_offs = SPM_VEN_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_ISP,
> +               .name = "isp",
> +               .sta_mask = ISP_PWR_STA_MASK,
> +               .ctl_offs = SPM_ISP_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(13, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_DIS,
> +               .name = "dis",
> +               .sta_mask = DIS_PWR_STA_MASK,
> +               .ctl_offs = SPM_DIS_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(12, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_VEN2,
> +               .name = "ven2",
> +               .sta_mask = VEN2_PWR_STA_MASK,
> +               .ctl_offs = SPM_VEN2_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_AUDIO,
> +               .name = "audio",
> +               .sta_mask = AUDIO_PWR_STA_MASK,
> +               .ctl_offs = SPM_AUDIO_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG_2D,
> +               .name = "mfg_2d",
> +               .sta_mask = MFG_2D_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_2D_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(13, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
> +               .name = "mfg_async",
> +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = 0,
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_USB,
> +               .name = "usb",
> +               .sta_mask = USB_PWR_STA_MASK,
> +               .ctl_offs = SPM_USB_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       },
> +};
> +
> +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
> +
> +struct scp;
> +
> +struct scp_domain {
> +       struct generic_pm_domain pmd;
> +       struct scp_domain_data *data;
> +       struct scp *scp;
> +};
> +
> +struct scp {
> +       struct scp_domain domains[NUM_DOMAINS];
> +       struct generic_pm_domain *pmd[NUM_DOMAINS];
> +       struct genpd_onecell_data pd_data;
> +       struct device *dev;
> +       void __iomem *base;
> +};
> +
> +static int scpsys_power_on(struct generic_pm_domain *genpd)
> +{
> +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> +       struct scp *scp = scpd->scp;
> +       struct scp_domain_data *data = scpd->data;
> +       unsigned long expired;
> +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> +       u32 val;
> +       int ret;
> +
> +       val = readl(ctl_addr);
> +       val |= PWR_ON_BIT;
> +       writel(val, ctl_addr);
> +       val |= PWR_ON_2ND_BIT;
> +       writel(val, ctl_addr);
> +
> +       /* wait until PWR_ACK = 1 */
> +       expired = jiffies + HZ;
> +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       val &= ~PWR_CLK_DIS_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ISO_BIT;
> +       writel(val, ctl_addr);
> +
> +       val |= PWR_RST_B_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~data->sram_pdn_bits;
> +       writel(val, ctl_addr);
> +
> +       /* wait until SRAM_PDN_ACK all 0 */
> +       expired = jiffies + HZ;
> +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {

I think "sram_pdn_ack &&" was added accidently here. It is always
bigger then zero.

> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       return 0;
> +out:
> +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
> +
> +       return ret;
> +}
> +
> +static int scpsys_power_off(struct generic_pm_domain *genpd)
> +{
> +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> +       struct scp *scp = scpd->scp;
> +       struct scp_domain_data *data = scpd->data;
> +       unsigned long expired;
> +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> +       u32 val;
> +       int ret;
> +
> +       val = readl(ctl_addr);
> +       val |= data->sram_pdn_bits;
> +       writel(val, ctl_addr);
> +
> +       /* wait until SRAM_PDN_ACK all 1 */
> +       expired = jiffies + HZ;
> +       while ((readl(ctl_addr) & sram_pdn_ack) != sram_pdn_ack) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       val |= PWR_ISO_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_RST_B_BIT;
> +       writel(val, ctl_addr);
> +
> +       val |= PWR_CLK_DIS_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ON_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ON_2ND_BIT;
> +       writel(val, ctl_addr);
> +
> +       /* wait until PWR_ACK = 0 */
> +       expired = jiffies + HZ;
> +       while ((readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> +                       (readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       return 0;
> +
> +out:
> +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);

typo, this shoudl be "power off domain"

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
> This adds a power domain driver for the Mediatek SCPSYS unit.
>
> The System Control Processor System (SCPSYS) has several power
> management related tasks in the system. The tasks include thermal
> measurement, dynamic voltage frequency scaling (DVFS), interrupt
> filter and lowlevel sleep control. The System Power Manager (SPM)
> inside the SCPSYS is for the MTCMOS power domain control.
>
> For now this driver only adds power domain support, the more
> advanced features are not yet supported. The driver implements
> the generic PM domain device tree bindings, the first user will
> most likely be the Mediatek AFE audio driver.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/soc/mediatek/Kconfig             |   6 +
>  drivers/soc/mediatek/Makefile            |   1 +
>  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
>  include/dt-bindings/power/mt8173-power.h |  15 ++
>  4 files changed, 367 insertions(+)
>  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
>  create mode 100644 include/dt-bindings/power/mt8173-power.h
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index bcdb22d..1d34819 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
>           Say yes here to add support for MediaTek PMIC Wrapper found
>           on different MediaTek SoCs. The PMIC wrapper is a proprietary
>           hardware to connect the PMIC.
> +
> +config MTK_SCPSYS
> +       tristate "MediaTek SCPSYS Support"
> +       help
> +         Say yes here to add support for the MediaTek SCPSYS power domain
> +         driver.
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index ecaf4de..ce88693 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1 +1,2 @@
>  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> new file mode 100644
> index 0000000..a72ac51
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -0,0 +1,345 @@
> +/*
> + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/pm_domain.h>
> +#include <linux/delay.h>
> +#include <dt-bindings/power/mt8173-power.h>
> +#include <linux/mfd/syscon.h>
> +
> +#define SPM_VDE_PWR_CON                        0x0210
> +#define SPM_MFG_PWR_CON                        0x0214
> +#define SPM_VEN_PWR_CON                        0x0230
> +#define SPM_ISP_PWR_CON                        0x0238
> +#define SPM_DIS_PWR_CON                        0x023c
> +#define SPM_VEN2_PWR_CON               0x0298
> +#define SPM_AUDIO_PWR_CON              0x029c
> +#define SPM_MFG_2D_PWR_CON             0x02c0
> +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
> +#define SPM_USB_PWR_CON                        0x02cc
> +#define SPM_PWR_STATUS                 0x060c
> +#define SPM_PWR_STATUS_2ND             0x0610
> +
> +#define PWR_RST_B_BIT                  BIT(0)
> +#define PWR_ISO_BIT                    BIT(1)
> +#define PWR_ON_BIT                     BIT(2)
> +#define PWR_ON_2ND_BIT                 BIT(3)
> +#define PWR_CLK_DIS_BIT                        BIT(4)
> +
> +#define DIS_PWR_STA_MASK               BIT(3)
> +#define MFG_PWR_STA_MASK               BIT(4)
> +#define ISP_PWR_STA_MASK               BIT(5)
> +#define VDE_PWR_STA_MASK               BIT(7)
> +#define VEN2_PWR_STA_MASK              BIT(20)
> +#define VEN_PWR_STA_MASK               BIT(21)
> +#define MFG_2D_PWR_STA_MASK            BIT(22)
> +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
> +#define AUDIO_PWR_STA_MASK             BIT(24)
> +#define USB_PWR_STA_MASK               BIT(25)
> +
> +struct scp_domain_data {
> +       const char *name;
> +       u32 sta_mask;
> +       int ctl_offs;
> +       u32 sram_pdn_bits;
> +       u32 sram_pdn_ack_bits;
> +       int id;
> +};
> +
> +static struct scp_domain_data scp_domain_data[] = {
> +       {
> +               .id = MT8173_POWER_DOMAIN_VDE,
> +               .name = "vde",
> +               .sta_mask = VDE_PWR_STA_MASK,
> +               .ctl_offs = SPM_VDE_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(12, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG,
> +               .name = "mfg",
> +               .sta_mask = MFG_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_PWR_CON,
> +               .sram_pdn_bits = GENMASK(13, 8),
> +               .sram_pdn_ack_bits = GENMASK(21, 16),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_VEN,
> +               .name = "ven",
> +               .sta_mask = VEN_PWR_STA_MASK,
> +               .ctl_offs = SPM_VEN_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_ISP,
> +               .name = "isp",
> +               .sta_mask = ISP_PWR_STA_MASK,
> +               .ctl_offs = SPM_ISP_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(13, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_DIS,
> +               .name = "dis",
> +               .sta_mask = DIS_PWR_STA_MASK,
> +               .ctl_offs = SPM_DIS_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(12, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_VEN2,
> +               .name = "ven2",
> +               .sta_mask = VEN2_PWR_STA_MASK,
> +               .ctl_offs = SPM_VEN2_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_AUDIO,
> +               .name = "audio",
> +               .sta_mask = AUDIO_PWR_STA_MASK,
> +               .ctl_offs = SPM_AUDIO_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG_2D,
> +               .name = "mfg_2d",
> +               .sta_mask = MFG_2D_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_2D_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(13, 12),
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
> +               .name = "mfg_async",
> +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
> +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = 0,
> +       }, {
> +               .id = MT8173_POWER_DOMAIN_USB,
> +               .name = "usb",
> +               .sta_mask = USB_PWR_STA_MASK,
> +               .ctl_offs = SPM_USB_PWR_CON,
> +               .sram_pdn_bits = GENMASK(11, 8),
> +               .sram_pdn_ack_bits = GENMASK(15, 12),
> +       },
> +};
> +
> +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
> +
> +struct scp;
> +
> +struct scp_domain {
> +       struct generic_pm_domain pmd;
> +       struct scp_domain_data *data;
> +       struct scp *scp;
> +};
> +
> +struct scp {
> +       struct scp_domain domains[NUM_DOMAINS];
> +       struct generic_pm_domain *pmd[NUM_DOMAINS];
> +       struct genpd_onecell_data pd_data;
> +       struct device *dev;
> +       void __iomem *base;
> +};
> +
> +static int scpsys_power_on(struct generic_pm_domain *genpd)
> +{
> +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> +       struct scp *scp = scpd->scp;
> +       struct scp_domain_data *data = scpd->data;
> +       unsigned long expired;
> +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> +       u32 val;
> +       int ret;
> +
> +       val = readl(ctl_addr);
> +       val |= PWR_ON_BIT;
> +       writel(val, ctl_addr);
> +       val |= PWR_ON_2ND_BIT;
> +       writel(val, ctl_addr);
> +
> +       /* wait until PWR_ACK = 1 */
> +       expired = jiffies + HZ;
> +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       val &= ~PWR_CLK_DIS_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ISO_BIT;
> +       writel(val, ctl_addr);
> +
> +       val |= PWR_RST_B_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~data->sram_pdn_bits;
> +       writel(val, ctl_addr);
> +
> +       /* wait until SRAM_PDN_ACK all 0 */
> +       expired = jiffies + HZ;
> +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {

I think "sram_pdn_ack &&" was added accidently here. It is always
bigger then zero.

> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       return 0;
> +out:
> +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
> +
> +       return ret;
> +}
> +
> +static int scpsys_power_off(struct generic_pm_domain *genpd)
> +{
> +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> +       struct scp *scp = scpd->scp;
> +       struct scp_domain_data *data = scpd->data;
> +       unsigned long expired;
> +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> +       u32 val;
> +       int ret;
> +
> +       val = readl(ctl_addr);
> +       val |= data->sram_pdn_bits;
> +       writel(val, ctl_addr);
> +
> +       /* wait until SRAM_PDN_ACK all 1 */
> +       expired = jiffies + HZ;
> +       while ((readl(ctl_addr) & sram_pdn_ack) != sram_pdn_ack) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       val |= PWR_ISO_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_RST_B_BIT;
> +       writel(val, ctl_addr);
> +
> +       val |= PWR_CLK_DIS_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ON_BIT;
> +       writel(val, ctl_addr);
> +
> +       val &= ~PWR_ON_2ND_BIT;
> +       writel(val, ctl_addr);
> +
> +       /* wait until PWR_ACK = 0 */
> +       expired = jiffies + HZ;
> +       while ((readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> +                       (readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> +               cpu_relax();
> +               if (time_after(jiffies, expired)) {
> +                       ret = -EIO;
> +                       goto out;
> +               }
> +       }
> +
> +       return 0;
> +
> +out:
> +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);

typo, this shoudl be "power off domain"

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
> > This adds a power domain driver for the Mediatek SCPSYS unit.
> >
> > The System Control Processor System (SCPSYS) has several power
> > management related tasks in the system. The tasks include thermal
> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
> > filter and lowlevel sleep control. The System Power Manager (SPM)
> > inside the SCPSYS is for the MTCMOS power domain control.
> >
> > For now this driver only adds power domain support, the more
> > advanced features are not yet supported. The driver implements
> > the generic PM domain device tree bindings, the first user will
> > most likely be the Mediatek AFE audio driver.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/soc/mediatek/Kconfig             |   6 +
> >  drivers/soc/mediatek/Makefile            |   1 +
> >  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
> >  include/dt-bindings/power/mt8173-power.h |  15 ++
> >  4 files changed, 367 insertions(+)
> >  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
> >  create mode 100644 include/dt-bindings/power/mt8173-power.h
> >
> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > index bcdb22d..1d34819 100644
> > --- a/drivers/soc/mediatek/Kconfig
> > +++ b/drivers/soc/mediatek/Kconfig
> > @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
> >           Say yes here to add support for MediaTek PMIC Wrapper found
> >           on different MediaTek SoCs. The PMIC wrapper is a proprietary
> >           hardware to connect the PMIC.
> > +
> > +config MTK_SCPSYS
> > +       tristate "MediaTek SCPSYS Support"
> > +       help
> > +         Say yes here to add support for the MediaTek SCPSYS power domain
> > +         driver.
> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> > index ecaf4de..ce88693 100644
> > --- a/drivers/soc/mediatek/Makefile
> > +++ b/drivers/soc/mediatek/Makefile
> > @@ -1 +1,2 @@
> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> > +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > new file mode 100644
> > index 0000000..a72ac51
> > --- /dev/null
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -0,0 +1,345 @@
> > +/*
> > + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/delay.h>
> > +#include <dt-bindings/power/mt8173-power.h>
> > +#include <linux/mfd/syscon.h>
> > +
> > +#define SPM_VDE_PWR_CON                        0x0210
> > +#define SPM_MFG_PWR_CON                        0x0214
> > +#define SPM_VEN_PWR_CON                        0x0230
> > +#define SPM_ISP_PWR_CON                        0x0238
> > +#define SPM_DIS_PWR_CON                        0x023c
> > +#define SPM_VEN2_PWR_CON               0x0298
> > +#define SPM_AUDIO_PWR_CON              0x029c
> > +#define SPM_MFG_2D_PWR_CON             0x02c0
> > +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
> > +#define SPM_USB_PWR_CON                        0x02cc
> > +#define SPM_PWR_STATUS                 0x060c
> > +#define SPM_PWR_STATUS_2ND             0x0610
> > +
> > +#define PWR_RST_B_BIT                  BIT(0)
> > +#define PWR_ISO_BIT                    BIT(1)
> > +#define PWR_ON_BIT                     BIT(2)
> > +#define PWR_ON_2ND_BIT                 BIT(3)
> > +#define PWR_CLK_DIS_BIT                        BIT(4)
> > +
> > +#define DIS_PWR_STA_MASK               BIT(3)
> > +#define MFG_PWR_STA_MASK               BIT(4)
> > +#define ISP_PWR_STA_MASK               BIT(5)
> > +#define VDE_PWR_STA_MASK               BIT(7)
> > +#define VEN2_PWR_STA_MASK              BIT(20)
> > +#define VEN_PWR_STA_MASK               BIT(21)
> > +#define MFG_2D_PWR_STA_MASK            BIT(22)
> > +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
> > +#define AUDIO_PWR_STA_MASK             BIT(24)
> > +#define USB_PWR_STA_MASK               BIT(25)
> > +
> > +struct scp_domain_data {
> > +       const char *name;
> > +       u32 sta_mask;
> > +       int ctl_offs;
> > +       u32 sram_pdn_bits;
> > +       u32 sram_pdn_ack_bits;
> > +       int id;
> > +};
> > +
> > +static struct scp_domain_data scp_domain_data[] = {
> > +       {
> > +               .id = MT8173_POWER_DOMAIN_VDE,
> > +               .name = "vde",
> > +               .sta_mask = VDE_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VDE_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG,
> > +               .name = "mfg",
> > +               .sta_mask = MFG_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(13, 8),
> > +               .sram_pdn_ack_bits = GENMASK(21, 16),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_VEN,
> > +               .name = "ven",
> > +               .sta_mask = VEN_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VEN_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_ISP,
> > +               .name = "isp",
> > +               .sta_mask = ISP_PWR_STA_MASK,
> > +               .ctl_offs = SPM_ISP_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_DIS,
> > +               .name = "dis",
> > +               .sta_mask = DIS_PWR_STA_MASK,
> > +               .ctl_offs = SPM_DIS_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_VEN2,
> > +               .name = "ven2",
> > +               .sta_mask = VEN2_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VEN2_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_AUDIO,
> > +               .name = "audio",
> > +               .sta_mask = AUDIO_PWR_STA_MASK,
> > +               .ctl_offs = SPM_AUDIO_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG_2D,
> > +               .name = "mfg_2d",
> > +               .sta_mask = MFG_2D_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_2D_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
> > +               .name = "mfg_async",
> > +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = 0,
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_USB,
> > +               .name = "usb",
> > +               .sta_mask = USB_PWR_STA_MASK,
> > +               .ctl_offs = SPM_USB_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       },
> > +};
> > +
> > +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
> > +
> > +struct scp;
> > +
> > +struct scp_domain {
> > +       struct generic_pm_domain pmd;
> > +       struct scp_domain_data *data;
> > +       struct scp *scp;
> > +};
> > +
> > +struct scp {
> > +       struct scp_domain domains[NUM_DOMAINS];
> > +       struct generic_pm_domain *pmd[NUM_DOMAINS];
> > +       struct genpd_onecell_data pd_data;
> > +       struct device *dev;
> > +       void __iomem *base;
> > +};
> > +
> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
> > +{
> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> > +       struct scp *scp = scpd->scp;
> > +       struct scp_domain_data *data = scpd->data;
> > +       unsigned long expired;
> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> > +       u32 val;
> > +       int ret;
> > +
> > +       val = readl(ctl_addr);
> > +       val |= PWR_ON_BIT;
> > +       writel(val, ctl_addr);
> > +       val |= PWR_ON_2ND_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       /* wait until PWR_ACK = 1 */
> > +       expired = jiffies + HZ;
> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> > +               cpu_relax();
> > +               if (time_after(jiffies, expired)) {
> > +                       ret = -EIO;
> > +                       goto out;
> > +               }
> > +       }
> > +
> > +       val &= ~PWR_CLK_DIS_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val &= ~PWR_ISO_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val |= PWR_RST_B_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val &= ~data->sram_pdn_bits;
> > +       writel(val, ctl_addr);
> > +
> > +       /* wait until SRAM_PDN_ACK all 0 */
> > +       expired = jiffies + HZ;
> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
> 
> I think "sram_pdn_ack &&" was added accidently here. It is always
> bigger then zero.

Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.

> > +
> > +out:
> > +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
> 
> typo, this shoudl be "power off domain"

Fixed, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>:
> > This adds a power domain driver for the Mediatek SCPSYS unit.
> >
> > The System Control Processor System (SCPSYS) has several power
> > management related tasks in the system. The tasks include thermal
> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
> > filter and lowlevel sleep control. The System Power Manager (SPM)
> > inside the SCPSYS is for the MTCMOS power domain control.
> >
> > For now this driver only adds power domain support, the more
> > advanced features are not yet supported. The driver implements
> > the generic PM domain device tree bindings, the first user will
> > most likely be the Mediatek AFE audio driver.
> >
> > Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > ---
> >  drivers/soc/mediatek/Kconfig             |   6 +
> >  drivers/soc/mediatek/Makefile            |   1 +
> >  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
> >  include/dt-bindings/power/mt8173-power.h |  15 ++
> >  4 files changed, 367 insertions(+)
> >  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
> >  create mode 100644 include/dt-bindings/power/mt8173-power.h
> >
> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > index bcdb22d..1d34819 100644
> > --- a/drivers/soc/mediatek/Kconfig
> > +++ b/drivers/soc/mediatek/Kconfig
> > @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
> >           Say yes here to add support for MediaTek PMIC Wrapper found
> >           on different MediaTek SoCs. The PMIC wrapper is a proprietary
> >           hardware to connect the PMIC.
> > +
> > +config MTK_SCPSYS
> > +       tristate "MediaTek SCPSYS Support"
> > +       help
> > +         Say yes here to add support for the MediaTek SCPSYS power domain
> > +         driver.
> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> > index ecaf4de..ce88693 100644
> > --- a/drivers/soc/mediatek/Makefile
> > +++ b/drivers/soc/mediatek/Makefile
> > @@ -1 +1,2 @@
> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> > +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > new file mode 100644
> > index 0000000..a72ac51
> > --- /dev/null
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -0,0 +1,345 @@
> > +/*
> > + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/delay.h>
> > +#include <dt-bindings/power/mt8173-power.h>
> > +#include <linux/mfd/syscon.h>
> > +
> > +#define SPM_VDE_PWR_CON                        0x0210
> > +#define SPM_MFG_PWR_CON                        0x0214
> > +#define SPM_VEN_PWR_CON                        0x0230
> > +#define SPM_ISP_PWR_CON                        0x0238
> > +#define SPM_DIS_PWR_CON                        0x023c
> > +#define SPM_VEN2_PWR_CON               0x0298
> > +#define SPM_AUDIO_PWR_CON              0x029c
> > +#define SPM_MFG_2D_PWR_CON             0x02c0
> > +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
> > +#define SPM_USB_PWR_CON                        0x02cc
> > +#define SPM_PWR_STATUS                 0x060c
> > +#define SPM_PWR_STATUS_2ND             0x0610
> > +
> > +#define PWR_RST_B_BIT                  BIT(0)
> > +#define PWR_ISO_BIT                    BIT(1)
> > +#define PWR_ON_BIT                     BIT(2)
> > +#define PWR_ON_2ND_BIT                 BIT(3)
> > +#define PWR_CLK_DIS_BIT                        BIT(4)
> > +
> > +#define DIS_PWR_STA_MASK               BIT(3)
> > +#define MFG_PWR_STA_MASK               BIT(4)
> > +#define ISP_PWR_STA_MASK               BIT(5)
> > +#define VDE_PWR_STA_MASK               BIT(7)
> > +#define VEN2_PWR_STA_MASK              BIT(20)
> > +#define VEN_PWR_STA_MASK               BIT(21)
> > +#define MFG_2D_PWR_STA_MASK            BIT(22)
> > +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
> > +#define AUDIO_PWR_STA_MASK             BIT(24)
> > +#define USB_PWR_STA_MASK               BIT(25)
> > +
> > +struct scp_domain_data {
> > +       const char *name;
> > +       u32 sta_mask;
> > +       int ctl_offs;
> > +       u32 sram_pdn_bits;
> > +       u32 sram_pdn_ack_bits;
> > +       int id;
> > +};
> > +
> > +static struct scp_domain_data scp_domain_data[] = {
> > +       {
> > +               .id = MT8173_POWER_DOMAIN_VDE,
> > +               .name = "vde",
> > +               .sta_mask = VDE_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VDE_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG,
> > +               .name = "mfg",
> > +               .sta_mask = MFG_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(13, 8),
> > +               .sram_pdn_ack_bits = GENMASK(21, 16),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_VEN,
> > +               .name = "ven",
> > +               .sta_mask = VEN_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VEN_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_ISP,
> > +               .name = "isp",
> > +               .sta_mask = ISP_PWR_STA_MASK,
> > +               .ctl_offs = SPM_ISP_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_DIS,
> > +               .name = "dis",
> > +               .sta_mask = DIS_PWR_STA_MASK,
> > +               .ctl_offs = SPM_DIS_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_VEN2,
> > +               .name = "ven2",
> > +               .sta_mask = VEN2_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VEN2_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_AUDIO,
> > +               .name = "audio",
> > +               .sta_mask = AUDIO_PWR_STA_MASK,
> > +               .ctl_offs = SPM_AUDIO_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG_2D,
> > +               .name = "mfg_2d",
> > +               .sta_mask = MFG_2D_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_2D_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
> > +               .name = "mfg_async",
> > +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = 0,
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_USB,
> > +               .name = "usb",
> > +               .sta_mask = USB_PWR_STA_MASK,
> > +               .ctl_offs = SPM_USB_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       },
> > +};
> > +
> > +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
> > +
> > +struct scp;
> > +
> > +struct scp_domain {
> > +       struct generic_pm_domain pmd;
> > +       struct scp_domain_data *data;
> > +       struct scp *scp;
> > +};
> > +
> > +struct scp {
> > +       struct scp_domain domains[NUM_DOMAINS];
> > +       struct generic_pm_domain *pmd[NUM_DOMAINS];
> > +       struct genpd_onecell_data pd_data;
> > +       struct device *dev;
> > +       void __iomem *base;
> > +};
> > +
> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
> > +{
> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> > +       struct scp *scp = scpd->scp;
> > +       struct scp_domain_data *data = scpd->data;
> > +       unsigned long expired;
> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> > +       u32 val;
> > +       int ret;
> > +
> > +       val = readl(ctl_addr);
> > +       val |= PWR_ON_BIT;
> > +       writel(val, ctl_addr);
> > +       val |= PWR_ON_2ND_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       /* wait until PWR_ACK = 1 */
> > +       expired = jiffies + HZ;
> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> > +               cpu_relax();
> > +               if (time_after(jiffies, expired)) {
> > +                       ret = -EIO;
> > +                       goto out;
> > +               }
> > +       }
> > +
> > +       val &= ~PWR_CLK_DIS_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val &= ~PWR_ISO_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val |= PWR_RST_B_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val &= ~data->sram_pdn_bits;
> > +       writel(val, ctl_addr);
> > +
> > +       /* wait until SRAM_PDN_ACK all 0 */
> > +       expired = jiffies + HZ;
> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
> 
> I think "sram_pdn_ack &&" was added accidently here. It is always
> bigger then zero.

Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.

> > +
> > +out:
> > +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
> 
> typo, this shoudl be "power off domain"

Fixed, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
> > This adds a power domain driver for the Mediatek SCPSYS unit.
> >
> > The System Control Processor System (SCPSYS) has several power
> > management related tasks in the system. The tasks include thermal
> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
> > filter and lowlevel sleep control. The System Power Manager (SPM)
> > inside the SCPSYS is for the MTCMOS power domain control.
> >
> > For now this driver only adds power domain support, the more
> > advanced features are not yet supported. The driver implements
> > the generic PM domain device tree bindings, the first user will
> > most likely be the Mediatek AFE audio driver.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/soc/mediatek/Kconfig             |   6 +
> >  drivers/soc/mediatek/Makefile            |   1 +
> >  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
> >  include/dt-bindings/power/mt8173-power.h |  15 ++
> >  4 files changed, 367 insertions(+)
> >  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
> >  create mode 100644 include/dt-bindings/power/mt8173-power.h
> >
> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > index bcdb22d..1d34819 100644
> > --- a/drivers/soc/mediatek/Kconfig
> > +++ b/drivers/soc/mediatek/Kconfig
> > @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
> >           Say yes here to add support for MediaTek PMIC Wrapper found
> >           on different MediaTek SoCs. The PMIC wrapper is a proprietary
> >           hardware to connect the PMIC.
> > +
> > +config MTK_SCPSYS
> > +       tristate "MediaTek SCPSYS Support"
> > +       help
> > +         Say yes here to add support for the MediaTek SCPSYS power domain
> > +         driver.
> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> > index ecaf4de..ce88693 100644
> > --- a/drivers/soc/mediatek/Makefile
> > +++ b/drivers/soc/mediatek/Makefile
> > @@ -1 +1,2 @@
> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> > +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > new file mode 100644
> > index 0000000..a72ac51
> > --- /dev/null
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -0,0 +1,345 @@
> > +/*
> > + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/delay.h>
> > +#include <dt-bindings/power/mt8173-power.h>
> > +#include <linux/mfd/syscon.h>
> > +
> > +#define SPM_VDE_PWR_CON                        0x0210
> > +#define SPM_MFG_PWR_CON                        0x0214
> > +#define SPM_VEN_PWR_CON                        0x0230
> > +#define SPM_ISP_PWR_CON                        0x0238
> > +#define SPM_DIS_PWR_CON                        0x023c
> > +#define SPM_VEN2_PWR_CON               0x0298
> > +#define SPM_AUDIO_PWR_CON              0x029c
> > +#define SPM_MFG_2D_PWR_CON             0x02c0
> > +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
> > +#define SPM_USB_PWR_CON                        0x02cc
> > +#define SPM_PWR_STATUS                 0x060c
> > +#define SPM_PWR_STATUS_2ND             0x0610
> > +
> > +#define PWR_RST_B_BIT                  BIT(0)
> > +#define PWR_ISO_BIT                    BIT(1)
> > +#define PWR_ON_BIT                     BIT(2)
> > +#define PWR_ON_2ND_BIT                 BIT(3)
> > +#define PWR_CLK_DIS_BIT                        BIT(4)
> > +
> > +#define DIS_PWR_STA_MASK               BIT(3)
> > +#define MFG_PWR_STA_MASK               BIT(4)
> > +#define ISP_PWR_STA_MASK               BIT(5)
> > +#define VDE_PWR_STA_MASK               BIT(7)
> > +#define VEN2_PWR_STA_MASK              BIT(20)
> > +#define VEN_PWR_STA_MASK               BIT(21)
> > +#define MFG_2D_PWR_STA_MASK            BIT(22)
> > +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
> > +#define AUDIO_PWR_STA_MASK             BIT(24)
> > +#define USB_PWR_STA_MASK               BIT(25)
> > +
> > +struct scp_domain_data {
> > +       const char *name;
> > +       u32 sta_mask;
> > +       int ctl_offs;
> > +       u32 sram_pdn_bits;
> > +       u32 sram_pdn_ack_bits;
> > +       int id;
> > +};
> > +
> > +static struct scp_domain_data scp_domain_data[] = {
> > +       {
> > +               .id = MT8173_POWER_DOMAIN_VDE,
> > +               .name = "vde",
> > +               .sta_mask = VDE_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VDE_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG,
> > +               .name = "mfg",
> > +               .sta_mask = MFG_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(13, 8),
> > +               .sram_pdn_ack_bits = GENMASK(21, 16),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_VEN,
> > +               .name = "ven",
> > +               .sta_mask = VEN_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VEN_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_ISP,
> > +               .name = "isp",
> > +               .sta_mask = ISP_PWR_STA_MASK,
> > +               .ctl_offs = SPM_ISP_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_DIS,
> > +               .name = "dis",
> > +               .sta_mask = DIS_PWR_STA_MASK,
> > +               .ctl_offs = SPM_DIS_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_VEN2,
> > +               .name = "ven2",
> > +               .sta_mask = VEN2_PWR_STA_MASK,
> > +               .ctl_offs = SPM_VEN2_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_AUDIO,
> > +               .name = "audio",
> > +               .sta_mask = AUDIO_PWR_STA_MASK,
> > +               .ctl_offs = SPM_AUDIO_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG_2D,
> > +               .name = "mfg_2d",
> > +               .sta_mask = MFG_2D_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_2D_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
> > +               .name = "mfg_async",
> > +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
> > +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = 0,
> > +       }, {
> > +               .id = MT8173_POWER_DOMAIN_USB,
> > +               .name = "usb",
> > +               .sta_mask = USB_PWR_STA_MASK,
> > +               .ctl_offs = SPM_USB_PWR_CON,
> > +               .sram_pdn_bits = GENMASK(11, 8),
> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
> > +       },
> > +};
> > +
> > +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
> > +
> > +struct scp;
> > +
> > +struct scp_domain {
> > +       struct generic_pm_domain pmd;
> > +       struct scp_domain_data *data;
> > +       struct scp *scp;
> > +};
> > +
> > +struct scp {
> > +       struct scp_domain domains[NUM_DOMAINS];
> > +       struct generic_pm_domain *pmd[NUM_DOMAINS];
> > +       struct genpd_onecell_data pd_data;
> > +       struct device *dev;
> > +       void __iomem *base;
> > +};
> > +
> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
> > +{
> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> > +       struct scp *scp = scpd->scp;
> > +       struct scp_domain_data *data = scpd->data;
> > +       unsigned long expired;
> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> > +       u32 val;
> > +       int ret;
> > +
> > +       val = readl(ctl_addr);
> > +       val |= PWR_ON_BIT;
> > +       writel(val, ctl_addr);
> > +       val |= PWR_ON_2ND_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       /* wait until PWR_ACK = 1 */
> > +       expired = jiffies + HZ;
> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> > +               cpu_relax();
> > +               if (time_after(jiffies, expired)) {
> > +                       ret = -EIO;
> > +                       goto out;
> > +               }
> > +       }
> > +
> > +       val &= ~PWR_CLK_DIS_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val &= ~PWR_ISO_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val |= PWR_RST_B_BIT;
> > +       writel(val, ctl_addr);
> > +
> > +       val &= ~data->sram_pdn_bits;
> > +       writel(val, ctl_addr);
> > +
> > +       /* wait until SRAM_PDN_ACK all 0 */
> > +       expired = jiffies + HZ;
> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
> 
> I think "sram_pdn_ack &&" was added accidently here. It is always
> bigger then zero.

Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.

> > +
> > +out:
> > +       dev_err(scp->dev, "Failed to power on domain %s\n", scpd->data->name);
> 
> typo, this shoudl be "power off domain"

Fixed, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
>> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> > This adds a power domain driver for the Mediatek SCPSYS unit.
>> >
>> > The System Control Processor System (SCPSYS) has several power
>> > management related tasks in the system. The tasks include thermal
>> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
>> > filter and lowlevel sleep control. The System Power Manager (SPM)
>> > inside the SCPSYS is for the MTCMOS power domain control.
>> >
>> > For now this driver only adds power domain support, the more
>> > advanced features are not yet supported. The driver implements
>> > the generic PM domain device tree bindings, the first user will
>> > most likely be the Mediatek AFE audio driver.
>> >
>> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> > ---
>> >  drivers/soc/mediatek/Kconfig             |   6 +
>> >  drivers/soc/mediatek/Makefile            |   1 +
>> >  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
>> >  include/dt-bindings/power/mt8173-power.h |  15 ++
>> >  4 files changed, 367 insertions(+)
>> >  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
>> >  create mode 100644 include/dt-bindings/power/mt8173-power.h
>> >
>> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
>> > index bcdb22d..1d34819 100644
>> > --- a/drivers/soc/mediatek/Kconfig
>> > +++ b/drivers/soc/mediatek/Kconfig
>> > @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
>> >           Say yes here to add support for MediaTek PMIC Wrapper found
>> >           on different MediaTek SoCs. The PMIC wrapper is a proprietary
>> >           hardware to connect the PMIC.
>> > +
>> > +config MTK_SCPSYS
>> > +       tristate "MediaTek SCPSYS Support"
>> > +       help
>> > +         Say yes here to add support for the MediaTek SCPSYS power domain
>> > +         driver.
>> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
>> > index ecaf4de..ce88693 100644
>> > --- a/drivers/soc/mediatek/Makefile
>> > +++ b/drivers/soc/mediatek/Makefile
>> > @@ -1 +1,2 @@
>> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
>> > +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
>> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
>> > new file mode 100644
>> > index 0000000..a72ac51
>> > --- /dev/null
>> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
>> > @@ -0,0 +1,345 @@
>> > +/*
>> > + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
>> > + *
>> > + * This program is free software; you can redistribute it and/or modify
>> > + * it under the terms of the GNU General Public License version 2 as
>> > + * published by the Free Software Foundation.
>> > + *
>> > + * This program is distributed in the hope that it will be useful,
>> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> > + * GNU General Public License for more details.
>> > + */
>> > +#include <linux/clk.h>
>> > +#include <linux/io.h>
>> > +#include <linux/kernel.h>
>> > +#include <linux/module.h>
>> > +#include <linux/of_device.h>
>> > +#include <linux/platform_device.h>
>> > +#include <linux/regmap.h>
>> > +#include <linux/pm_domain.h>
>> > +#include <linux/delay.h>
>> > +#include <dt-bindings/power/mt8173-power.h>
>> > +#include <linux/mfd/syscon.h>
>> > +
>> > +#define SPM_VDE_PWR_CON                        0x0210
>> > +#define SPM_MFG_PWR_CON                        0x0214
>> > +#define SPM_VEN_PWR_CON                        0x0230
>> > +#define SPM_ISP_PWR_CON                        0x0238
>> > +#define SPM_DIS_PWR_CON                        0x023c
>> > +#define SPM_VEN2_PWR_CON               0x0298
>> > +#define SPM_AUDIO_PWR_CON              0x029c
>> > +#define SPM_MFG_2D_PWR_CON             0x02c0
>> > +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
>> > +#define SPM_USB_PWR_CON                        0x02cc
>> > +#define SPM_PWR_STATUS                 0x060c
>> > +#define SPM_PWR_STATUS_2ND             0x0610
>> > +
>> > +#define PWR_RST_B_BIT                  BIT(0)
>> > +#define PWR_ISO_BIT                    BIT(1)
>> > +#define PWR_ON_BIT                     BIT(2)
>> > +#define PWR_ON_2ND_BIT                 BIT(3)
>> > +#define PWR_CLK_DIS_BIT                        BIT(4)
>> > +
>> > +#define DIS_PWR_STA_MASK               BIT(3)
>> > +#define MFG_PWR_STA_MASK               BIT(4)
>> > +#define ISP_PWR_STA_MASK               BIT(5)
>> > +#define VDE_PWR_STA_MASK               BIT(7)
>> > +#define VEN2_PWR_STA_MASK              BIT(20)
>> > +#define VEN_PWR_STA_MASK               BIT(21)
>> > +#define MFG_2D_PWR_STA_MASK            BIT(22)
>> > +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
>> > +#define AUDIO_PWR_STA_MASK             BIT(24)
>> > +#define USB_PWR_STA_MASK               BIT(25)
>> > +
>> > +struct scp_domain_data {
>> > +       const char *name;
>> > +       u32 sta_mask;
>> > +       int ctl_offs;
>> > +       u32 sram_pdn_bits;
>> > +       u32 sram_pdn_ack_bits;
>> > +       int id;
>> > +};
>> > +
>> > +static struct scp_domain_data scp_domain_data[] = {
>> > +       {
>> > +               .id = MT8173_POWER_DOMAIN_VDE,
>> > +               .name = "vde",
>> > +               .sta_mask = VDE_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VDE_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG,
>> > +               .name = "mfg",
>> > +               .sta_mask = MFG_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(13, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(21, 16),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_VEN,
>> > +               .name = "ven",
>> > +               .sta_mask = VEN_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VEN_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_ISP,
>> > +               .name = "isp",
>> > +               .sta_mask = ISP_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_ISP_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_DIS,
>> > +               .name = "dis",
>> > +               .sta_mask = DIS_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_DIS_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_VEN2,
>> > +               .name = "ven2",
>> > +               .sta_mask = VEN2_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VEN2_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_AUDIO,
>> > +               .name = "audio",
>> > +               .sta_mask = AUDIO_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_AUDIO_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG_2D,
>> > +               .name = "mfg_2d",
>> > +               .sta_mask = MFG_2D_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_2D_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
>> > +               .name = "mfg_async",
>> > +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = 0,
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_USB,
>> > +               .name = "usb",
>> > +               .sta_mask = USB_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_USB_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       },
>> > +};
>> > +
>> > +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
>> > +
>> > +struct scp;
>> > +
>> > +struct scp_domain {
>> > +       struct generic_pm_domain pmd;
>> > +       struct scp_domain_data *data;
>> > +       struct scp *scp;
>> > +};
>> > +
>> > +struct scp {
>> > +       struct scp_domain domains[NUM_DOMAINS];
>> > +       struct generic_pm_domain *pmd[NUM_DOMAINS];
>> > +       struct genpd_onecell_data pd_data;
>> > +       struct device *dev;
>> > +       void __iomem *base;
>> > +};
>> > +
>> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> > +{
>> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
>> > +       struct scp *scp = scpd->scp;
>> > +       struct scp_domain_data *data = scpd->data;
>> > +       unsigned long expired;
>> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
>> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
>> > +       u32 val;
>> > +       int ret;
>> > +
>> > +       val = readl(ctl_addr);
>> > +       val |= PWR_ON_BIT;
>> > +       writel(val, ctl_addr);
>> > +       val |= PWR_ON_2ND_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       /* wait until PWR_ACK = 1 */
>> > +       expired = jiffies + HZ;
>> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
>> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
>> > +               cpu_relax();
>> > +               if (time_after(jiffies, expired)) {
>> > +                       ret = -EIO;
>> > +                       goto out;
>> > +               }
>> > +       }
>> > +
>> > +       val &= ~PWR_CLK_DIS_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val &= ~PWR_ISO_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val |= PWR_RST_B_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val &= ~data->sram_pdn_bits;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       /* wait until SRAM_PDN_ACK all 0 */
>> > +       expired = jiffies + HZ;
>> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
>>
>> I think "sram_pdn_ack &&" was added accidently here. It is always
>> bigger then zero.
>
> Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.

In probe you turn on all power domains defined in scp_domain_data[].
So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
Does this make sense?



-- 
motzblog.wordpress.com

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
>> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> > This adds a power domain driver for the Mediatek SCPSYS unit.
>> >
>> > The System Control Processor System (SCPSYS) has several power
>> > management related tasks in the system. The tasks include thermal
>> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
>> > filter and lowlevel sleep control. The System Power Manager (SPM)
>> > inside the SCPSYS is for the MTCMOS power domain control.
>> >
>> > For now this driver only adds power domain support, the more
>> > advanced features are not yet supported. The driver implements
>> > the generic PM domain device tree bindings, the first user will
>> > most likely be the Mediatek AFE audio driver.
>> >
>> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> > ---
>> >  drivers/soc/mediatek/Kconfig             |   6 +
>> >  drivers/soc/mediatek/Makefile            |   1 +
>> >  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
>> >  include/dt-bindings/power/mt8173-power.h |  15 ++
>> >  4 files changed, 367 insertions(+)
>> >  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
>> >  create mode 100644 include/dt-bindings/power/mt8173-power.h
>> >
>> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
>> > index bcdb22d..1d34819 100644
>> > --- a/drivers/soc/mediatek/Kconfig
>> > +++ b/drivers/soc/mediatek/Kconfig
>> > @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
>> >           Say yes here to add support for MediaTek PMIC Wrapper found
>> >           on different MediaTek SoCs. The PMIC wrapper is a proprietary
>> >           hardware to connect the PMIC.
>> > +
>> > +config MTK_SCPSYS
>> > +       tristate "MediaTek SCPSYS Support"
>> > +       help
>> > +         Say yes here to add support for the MediaTek SCPSYS power domain
>> > +         driver.
>> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
>> > index ecaf4de..ce88693 100644
>> > --- a/drivers/soc/mediatek/Makefile
>> > +++ b/drivers/soc/mediatek/Makefile
>> > @@ -1 +1,2 @@
>> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
>> > +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
>> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
>> > new file mode 100644
>> > index 0000000..a72ac51
>> > --- /dev/null
>> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
>> > @@ -0,0 +1,345 @@
>> > +/*
>> > + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
>> > + *
>> > + * This program is free software; you can redistribute it and/or modify
>> > + * it under the terms of the GNU General Public License version 2 as
>> > + * published by the Free Software Foundation.
>> > + *
>> > + * This program is distributed in the hope that it will be useful,
>> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> > + * GNU General Public License for more details.
>> > + */
>> > +#include <linux/clk.h>
>> > +#include <linux/io.h>
>> > +#include <linux/kernel.h>
>> > +#include <linux/module.h>
>> > +#include <linux/of_device.h>
>> > +#include <linux/platform_device.h>
>> > +#include <linux/regmap.h>
>> > +#include <linux/pm_domain.h>
>> > +#include <linux/delay.h>
>> > +#include <dt-bindings/power/mt8173-power.h>
>> > +#include <linux/mfd/syscon.h>
>> > +
>> > +#define SPM_VDE_PWR_CON                        0x0210
>> > +#define SPM_MFG_PWR_CON                        0x0214
>> > +#define SPM_VEN_PWR_CON                        0x0230
>> > +#define SPM_ISP_PWR_CON                        0x0238
>> > +#define SPM_DIS_PWR_CON                        0x023c
>> > +#define SPM_VEN2_PWR_CON               0x0298
>> > +#define SPM_AUDIO_PWR_CON              0x029c
>> > +#define SPM_MFG_2D_PWR_CON             0x02c0
>> > +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
>> > +#define SPM_USB_PWR_CON                        0x02cc
>> > +#define SPM_PWR_STATUS                 0x060c
>> > +#define SPM_PWR_STATUS_2ND             0x0610
>> > +
>> > +#define PWR_RST_B_BIT                  BIT(0)
>> > +#define PWR_ISO_BIT                    BIT(1)
>> > +#define PWR_ON_BIT                     BIT(2)
>> > +#define PWR_ON_2ND_BIT                 BIT(3)
>> > +#define PWR_CLK_DIS_BIT                        BIT(4)
>> > +
>> > +#define DIS_PWR_STA_MASK               BIT(3)
>> > +#define MFG_PWR_STA_MASK               BIT(4)
>> > +#define ISP_PWR_STA_MASK               BIT(5)
>> > +#define VDE_PWR_STA_MASK               BIT(7)
>> > +#define VEN2_PWR_STA_MASK              BIT(20)
>> > +#define VEN_PWR_STA_MASK               BIT(21)
>> > +#define MFG_2D_PWR_STA_MASK            BIT(22)
>> > +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
>> > +#define AUDIO_PWR_STA_MASK             BIT(24)
>> > +#define USB_PWR_STA_MASK               BIT(25)
>> > +
>> > +struct scp_domain_data {
>> > +       const char *name;
>> > +       u32 sta_mask;
>> > +       int ctl_offs;
>> > +       u32 sram_pdn_bits;
>> > +       u32 sram_pdn_ack_bits;
>> > +       int id;
>> > +};
>> > +
>> > +static struct scp_domain_data scp_domain_data[] = {
>> > +       {
>> > +               .id = MT8173_POWER_DOMAIN_VDE,
>> > +               .name = "vde",
>> > +               .sta_mask = VDE_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VDE_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG,
>> > +               .name = "mfg",
>> > +               .sta_mask = MFG_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(13, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(21, 16),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_VEN,
>> > +               .name = "ven",
>> > +               .sta_mask = VEN_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VEN_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_ISP,
>> > +               .name = "isp",
>> > +               .sta_mask = ISP_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_ISP_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_DIS,
>> > +               .name = "dis",
>> > +               .sta_mask = DIS_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_DIS_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_VEN2,
>> > +               .name = "ven2",
>> > +               .sta_mask = VEN2_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VEN2_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_AUDIO,
>> > +               .name = "audio",
>> > +               .sta_mask = AUDIO_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_AUDIO_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG_2D,
>> > +               .name = "mfg_2d",
>> > +               .sta_mask = MFG_2D_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_2D_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
>> > +               .name = "mfg_async",
>> > +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = 0,
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_USB,
>> > +               .name = "usb",
>> > +               .sta_mask = USB_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_USB_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       },
>> > +};
>> > +
>> > +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
>> > +
>> > +struct scp;
>> > +
>> > +struct scp_domain {
>> > +       struct generic_pm_domain pmd;
>> > +       struct scp_domain_data *data;
>> > +       struct scp *scp;
>> > +};
>> > +
>> > +struct scp {
>> > +       struct scp_domain domains[NUM_DOMAINS];
>> > +       struct generic_pm_domain *pmd[NUM_DOMAINS];
>> > +       struct genpd_onecell_data pd_data;
>> > +       struct device *dev;
>> > +       void __iomem *base;
>> > +};
>> > +
>> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> > +{
>> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
>> > +       struct scp *scp = scpd->scp;
>> > +       struct scp_domain_data *data = scpd->data;
>> > +       unsigned long expired;
>> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
>> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
>> > +       u32 val;
>> > +       int ret;
>> > +
>> > +       val = readl(ctl_addr);
>> > +       val |= PWR_ON_BIT;
>> > +       writel(val, ctl_addr);
>> > +       val |= PWR_ON_2ND_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       /* wait until PWR_ACK = 1 */
>> > +       expired = jiffies + HZ;
>> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
>> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
>> > +               cpu_relax();
>> > +               if (time_after(jiffies, expired)) {
>> > +                       ret = -EIO;
>> > +                       goto out;
>> > +               }
>> > +       }
>> > +
>> > +       val &= ~PWR_CLK_DIS_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val &= ~PWR_ISO_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val |= PWR_RST_B_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val &= ~data->sram_pdn_bits;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       /* wait until SRAM_PDN_ACK all 0 */
>> > +       expired = jiffies + HZ;
>> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
>>
>> I think "sram_pdn_ack &&" was added accidently here. It is always
>> bigger then zero.
>
> Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.

In probe you turn on all power domains defined in scp_domain_data[].
So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
Does this make sense?



-- 
motzblog.wordpress.com

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
>> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> > This adds a power domain driver for the Mediatek SCPSYS unit.
>> >
>> > The System Control Processor System (SCPSYS) has several power
>> > management related tasks in the system. The tasks include thermal
>> > measurement, dynamic voltage frequency scaling (DVFS), interrupt
>> > filter and lowlevel sleep control. The System Power Manager (SPM)
>> > inside the SCPSYS is for the MTCMOS power domain control.
>> >
>> > For now this driver only adds power domain support, the more
>> > advanced features are not yet supported. The driver implements
>> > the generic PM domain device tree bindings, the first user will
>> > most likely be the Mediatek AFE audio driver.
>> >
>> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> > ---
>> >  drivers/soc/mediatek/Kconfig             |   6 +
>> >  drivers/soc/mediatek/Makefile            |   1 +
>> >  drivers/soc/mediatek/mtk-scpsys.c        | 345 +++++++++++++++++++++++++++++++
>> >  include/dt-bindings/power/mt8173-power.h |  15 ++
>> >  4 files changed, 367 insertions(+)
>> >  create mode 100644 drivers/soc/mediatek/mtk-scpsys.c
>> >  create mode 100644 include/dt-bindings/power/mt8173-power.h
>> >
>> > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
>> > index bcdb22d..1d34819 100644
>> > --- a/drivers/soc/mediatek/Kconfig
>> > +++ b/drivers/soc/mediatek/Kconfig
>> > @@ -9,3 +9,9 @@ config MTK_PMIC_WRAP
>> >           Say yes here to add support for MediaTek PMIC Wrapper found
>> >           on different MediaTek SoCs. The PMIC wrapper is a proprietary
>> >           hardware to connect the PMIC.
>> > +
>> > +config MTK_SCPSYS
>> > +       tristate "MediaTek SCPSYS Support"
>> > +       help
>> > +         Say yes here to add support for the MediaTek SCPSYS power domain
>> > +         driver.
>> > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
>> > index ecaf4de..ce88693 100644
>> > --- a/drivers/soc/mediatek/Makefile
>> > +++ b/drivers/soc/mediatek/Makefile
>> > @@ -1 +1,2 @@
>> >  obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
>> > +obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
>> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
>> > new file mode 100644
>> > index 0000000..a72ac51
>> > --- /dev/null
>> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
>> > @@ -0,0 +1,345 @@
>> > +/*
>> > + * Copyright (c) 2015 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
>> > + *
>> > + * This program is free software; you can redistribute it and/or modify
>> > + * it under the terms of the GNU General Public License version 2 as
>> > + * published by the Free Software Foundation.
>> > + *
>> > + * This program is distributed in the hope that it will be useful,
>> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> > + * GNU General Public License for more details.
>> > + */
>> > +#include <linux/clk.h>
>> > +#include <linux/io.h>
>> > +#include <linux/kernel.h>
>> > +#include <linux/module.h>
>> > +#include <linux/of_device.h>
>> > +#include <linux/platform_device.h>
>> > +#include <linux/regmap.h>
>> > +#include <linux/pm_domain.h>
>> > +#include <linux/delay.h>
>> > +#include <dt-bindings/power/mt8173-power.h>
>> > +#include <linux/mfd/syscon.h>
>> > +
>> > +#define SPM_VDE_PWR_CON                        0x0210
>> > +#define SPM_MFG_PWR_CON                        0x0214
>> > +#define SPM_VEN_PWR_CON                        0x0230
>> > +#define SPM_ISP_PWR_CON                        0x0238
>> > +#define SPM_DIS_PWR_CON                        0x023c
>> > +#define SPM_VEN2_PWR_CON               0x0298
>> > +#define SPM_AUDIO_PWR_CON              0x029c
>> > +#define SPM_MFG_2D_PWR_CON             0x02c0
>> > +#define SPM_MFG_ASYNC_PWR_CON          0x02c4
>> > +#define SPM_USB_PWR_CON                        0x02cc
>> > +#define SPM_PWR_STATUS                 0x060c
>> > +#define SPM_PWR_STATUS_2ND             0x0610
>> > +
>> > +#define PWR_RST_B_BIT                  BIT(0)
>> > +#define PWR_ISO_BIT                    BIT(1)
>> > +#define PWR_ON_BIT                     BIT(2)
>> > +#define PWR_ON_2ND_BIT                 BIT(3)
>> > +#define PWR_CLK_DIS_BIT                        BIT(4)
>> > +
>> > +#define DIS_PWR_STA_MASK               BIT(3)
>> > +#define MFG_PWR_STA_MASK               BIT(4)
>> > +#define ISP_PWR_STA_MASK               BIT(5)
>> > +#define VDE_PWR_STA_MASK               BIT(7)
>> > +#define VEN2_PWR_STA_MASK              BIT(20)
>> > +#define VEN_PWR_STA_MASK               BIT(21)
>> > +#define MFG_2D_PWR_STA_MASK            BIT(22)
>> > +#define MFG_ASYNC_PWR_STA_MASK         BIT(23)
>> > +#define AUDIO_PWR_STA_MASK             BIT(24)
>> > +#define USB_PWR_STA_MASK               BIT(25)
>> > +
>> > +struct scp_domain_data {
>> > +       const char *name;
>> > +       u32 sta_mask;
>> > +       int ctl_offs;
>> > +       u32 sram_pdn_bits;
>> > +       u32 sram_pdn_ack_bits;
>> > +       int id;
>> > +};
>> > +
>> > +static struct scp_domain_data scp_domain_data[] = {
>> > +       {
>> > +               .id = MT8173_POWER_DOMAIN_VDE,
>> > +               .name = "vde",
>> > +               .sta_mask = VDE_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VDE_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG,
>> > +               .name = "mfg",
>> > +               .sta_mask = MFG_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(13, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(21, 16),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_VEN,
>> > +               .name = "ven",
>> > +               .sta_mask = VEN_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VEN_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_ISP,
>> > +               .name = "isp",
>> > +               .sta_mask = ISP_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_ISP_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_DIS,
>> > +               .name = "dis",
>> > +               .sta_mask = DIS_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_DIS_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(12, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_VEN2,
>> > +               .name = "ven2",
>> > +               .sta_mask = VEN2_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_VEN2_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_AUDIO,
>> > +               .name = "audio",
>> > +               .sta_mask = AUDIO_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_AUDIO_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG_2D,
>> > +               .name = "mfg_2d",
>> > +               .sta_mask = MFG_2D_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_2D_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(13, 12),
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_MFG_ASYNC,
>> > +               .name = "mfg_async",
>> > +               .sta_mask = MFG_ASYNC_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = 0,
>> > +       }, {
>> > +               .id = MT8173_POWER_DOMAIN_USB,
>> > +               .name = "usb",
>> > +               .sta_mask = USB_PWR_STA_MASK,
>> > +               .ctl_offs = SPM_USB_PWR_CON,
>> > +               .sram_pdn_bits = GENMASK(11, 8),
>> > +               .sram_pdn_ack_bits = GENMASK(15, 12),
>> > +       },
>> > +};
>> > +
>> > +#define NUM_DOMAINS    ARRAY_SIZE(scp_domain_data)
>> > +
>> > +struct scp;
>> > +
>> > +struct scp_domain {
>> > +       struct generic_pm_domain pmd;
>> > +       struct scp_domain_data *data;
>> > +       struct scp *scp;
>> > +};
>> > +
>> > +struct scp {
>> > +       struct scp_domain domains[NUM_DOMAINS];
>> > +       struct generic_pm_domain *pmd[NUM_DOMAINS];
>> > +       struct genpd_onecell_data pd_data;
>> > +       struct device *dev;
>> > +       void __iomem *base;
>> > +};
>> > +
>> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> > +{
>> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
>> > +       struct scp *scp = scpd->scp;
>> > +       struct scp_domain_data *data = scpd->data;
>> > +       unsigned long expired;
>> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
>> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
>> > +       u32 val;
>> > +       int ret;
>> > +
>> > +       val = readl(ctl_addr);
>> > +       val |= PWR_ON_BIT;
>> > +       writel(val, ctl_addr);
>> > +       val |= PWR_ON_2ND_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       /* wait until PWR_ACK = 1 */
>> > +       expired = jiffies + HZ;
>> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
>> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
>> > +               cpu_relax();
>> > +               if (time_after(jiffies, expired)) {
>> > +                       ret = -EIO;
>> > +                       goto out;
>> > +               }
>> > +       }
>> > +
>> > +       val &= ~PWR_CLK_DIS_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val &= ~PWR_ISO_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val |= PWR_RST_B_BIT;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       val &= ~data->sram_pdn_bits;
>> > +       writel(val, ctl_addr);
>> > +
>> > +       /* wait until SRAM_PDN_ACK all 0 */
>> > +       expired = jiffies + HZ;
>> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
>>
>> I think "sram_pdn_ack &&" was added accidently here. It is always
>> bigger then zero.
>
> Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.

In probe you turn on all power domains defined in scp_domain_data[].
So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
Does this make sense?



-- 
motzblog.wordpress.com

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Fri, May 08, 2015 at 02:28:37PM +0200, Matthias Brugger wrote:
> 2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> > On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
> >> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
> >> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
> >> > +{
> >> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> >> > +       struct scp *scp = scpd->scp;
> >> > +       struct scp_domain_data *data = scpd->data;
> >> > +       unsigned long expired;
> >> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> >> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> >> > +       u32 val;
> >> > +       int ret;
> >> > +
> >> > +       val = readl(ctl_addr);
> >> > +       val |= PWR_ON_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +       val |= PWR_ON_2ND_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       /* wait until PWR_ACK = 1 */
> >> > +       expired = jiffies + HZ;
> >> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> >> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> >> > +               cpu_relax();
> >> > +               if (time_after(jiffies, expired)) {
> >> > +                       ret = -EIO;
> >> > +                       goto out;
> >> > +               }
> >> > +       }
> >> > +
> >> > +       val &= ~PWR_CLK_DIS_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val &= ~PWR_ISO_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val |= PWR_RST_B_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val &= ~data->sram_pdn_bits;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       /* wait until SRAM_PDN_ACK all 0 */
> >> > +       expired = jiffies + HZ;
> >> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
> >>
> >> I think "sram_pdn_ack &&" was added accidently here. It is always
> >> bigger then zero.
> >
> > Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.
> 
> In probe you turn on all power domains defined in scp_domain_data[].
> So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
> Does this make sense?

What makes you think that enabling the domains will fail? That doesn't
happen.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Fri, May 08, 2015 at 02:28:37PM +0200, Matthias Brugger wrote:
> 2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>:
> > On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
> >> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>:
> >> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
> >> > +{
> >> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> >> > +       struct scp *scp = scpd->scp;
> >> > +       struct scp_domain_data *data = scpd->data;
> >> > +       unsigned long expired;
> >> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> >> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> >> > +       u32 val;
> >> > +       int ret;
> >> > +
> >> > +       val = readl(ctl_addr);
> >> > +       val |= PWR_ON_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +       val |= PWR_ON_2ND_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       /* wait until PWR_ACK = 1 */
> >> > +       expired = jiffies + HZ;
> >> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> >> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> >> > +               cpu_relax();
> >> > +               if (time_after(jiffies, expired)) {
> >> > +                       ret = -EIO;
> >> > +                       goto out;
> >> > +               }
> >> > +       }
> >> > +
> >> > +       val &= ~PWR_CLK_DIS_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val &= ~PWR_ISO_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val |= PWR_RST_B_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val &= ~data->sram_pdn_bits;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       /* wait until SRAM_PDN_ACK all 0 */
> >> > +       expired = jiffies + HZ;
> >> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
> >>
> >> I think "sram_pdn_ack &&" was added accidently here. It is always
> >> bigger then zero.
> >
> > Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.
> 
> In probe you turn on all power domains defined in scp_domain_data[].
> So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
> Does this make sense?

What makes you think that enabling the domains will fail? That doesn't
happen.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Sascha Hauer]

On Fri, May 08, 2015 at 02:28:37PM +0200, Matthias Brugger wrote:
> 2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> > On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
> >> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
> >> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
> >> > +{
> >> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
> >> > +       struct scp *scp = scpd->scp;
> >> > +       struct scp_domain_data *data = scpd->data;
> >> > +       unsigned long expired;
> >> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
> >> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
> >> > +       u32 val;
> >> > +       int ret;
> >> > +
> >> > +       val = readl(ctl_addr);
> >> > +       val |= PWR_ON_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +       val |= PWR_ON_2ND_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       /* wait until PWR_ACK = 1 */
> >> > +       expired = jiffies + HZ;
> >> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
> >> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
> >> > +               cpu_relax();
> >> > +               if (time_after(jiffies, expired)) {
> >> > +                       ret = -EIO;
> >> > +                       goto out;
> >> > +               }
> >> > +       }
> >> > +
> >> > +       val &= ~PWR_CLK_DIS_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val &= ~PWR_ISO_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val |= PWR_RST_B_BIT;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       val &= ~data->sram_pdn_bits;
> >> > +       writel(val, ctl_addr);
> >> > +
> >> > +       /* wait until SRAM_PDN_ACK all 0 */
> >> > +       expired = jiffies + HZ;
> >> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
> >>
> >> I think "sram_pdn_ack &&" was added accidently here. It is always
> >> bigger then zero.
> >
> > Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.
> 
> In probe you turn on all power domains defined in scp_domain_data[].
> So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
> Does this make sense?

What makes you think that enabling the domains will fail? That doesn't
happen.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-05-08 14:51 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> On Fri, May 08, 2015 at 02:28:37PM +0200, Matthias Brugger wrote:
>> 2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> > On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
>> >> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> >> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> >> > +{
>> >> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
>> >> > +       struct scp *scp = scpd->scp;
>> >> > +       struct scp_domain_data *data = scpd->data;
>> >> > +       unsigned long expired;
>> >> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
>> >> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
>> >> > +       u32 val;
>> >> > +       int ret;
>> >> > +
>> >> > +       val = readl(ctl_addr);
>> >> > +       val |= PWR_ON_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +       val |= PWR_ON_2ND_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       /* wait until PWR_ACK = 1 */
>> >> > +       expired = jiffies + HZ;
>> >> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
>> >> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
>> >> > +               cpu_relax();
>> >> > +               if (time_after(jiffies, expired)) {
>> >> > +                       ret = -EIO;
>> >> > +                       goto out;
>> >> > +               }
>> >> > +       }
>> >> > +
>> >> > +       val &= ~PWR_CLK_DIS_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val &= ~PWR_ISO_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val |= PWR_RST_B_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val &= ~data->sram_pdn_bits;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       /* wait until SRAM_PDN_ACK all 0 */
>> >> > +       expired = jiffies + HZ;
>> >> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
>> >>
>> >> I think "sram_pdn_ack &&" was added accidently here. It is always
>> >> bigger then zero.
>> >
>> > Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.
>>
>> In probe you turn on all power domains defined in scp_domain_data[].
>> So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
>> Does this make sense?
>
> What makes you think that enabling the domains will fail? That doesn't
> happen.

You are right, I got confused, seems to be the friday-effect.
Sorry for the noise.

-- 
motzblog.wordpress.com

Re: [PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-05-08 14:51 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> On Fri, May 08, 2015 at 02:28:37PM +0200, Matthias Brugger wrote:
>> 2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> > On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
>> >> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> >> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> >> > +{
>> >> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
>> >> > +       struct scp *scp = scpd->scp;
>> >> > +       struct scp_domain_data *data = scpd->data;
>> >> > +       unsigned long expired;
>> >> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
>> >> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
>> >> > +       u32 val;
>> >> > +       int ret;
>> >> > +
>> >> > +       val = readl(ctl_addr);
>> >> > +       val |= PWR_ON_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +       val |= PWR_ON_2ND_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       /* wait until PWR_ACK = 1 */
>> >> > +       expired = jiffies + HZ;
>> >> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
>> >> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
>> >> > +               cpu_relax();
>> >> > +               if (time_after(jiffies, expired)) {
>> >> > +                       ret = -EIO;
>> >> > +                       goto out;
>> >> > +               }
>> >> > +       }
>> >> > +
>> >> > +       val &= ~PWR_CLK_DIS_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val &= ~PWR_ISO_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val |= PWR_RST_B_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val &= ~data->sram_pdn_bits;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       /* wait until SRAM_PDN_ACK all 0 */
>> >> > +       expired = jiffies + HZ;
>> >> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
>> >>
>> >> I think "sram_pdn_ack &&" was added accidently here. It is always
>> >> bigger then zero.
>> >
>> > Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.
>>
>> In probe you turn on all power domains defined in scp_domain_data[].
>> So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
>> Does this make sense?
>
> What makes you think that enabling the domains will fail? That doesn't
> happen.

You are right, I got confused, seems to be the friday-effect.
Sorry for the noise.

-- 
motzblog.wordpress.com

[PATCH 2/4] soc: Mediatek: Add SCPSYS power domain driver

[Matthias Brugger]

2015-05-08 14:51 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
> On Fri, May 08, 2015 at 02:28:37PM +0200, Matthias Brugger wrote:
>> 2015-05-08 14:19 GMT+02:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> > On Fri, May 08, 2015 at 02:16:06PM +0200, Matthias Brugger wrote:
>> >> 2015-03-10 16:41 GMT+01:00 Sascha Hauer <s.hauer@pengutronix.de>:
>> >> > +static int scpsys_power_on(struct generic_pm_domain *genpd)
>> >> > +{
>> >> > +       struct scp_domain *scpd = container_of(genpd, struct scp_domain, pmd);
>> >> > +       struct scp *scp = scpd->scp;
>> >> > +       struct scp_domain_data *data = scpd->data;
>> >> > +       unsigned long expired;
>> >> > +       void __iomem *ctl_addr = scpd->scp->base + data->ctl_offs;
>> >> > +       u32 sram_pdn_ack = data->sram_pdn_ack_bits;
>> >> > +       u32 val;
>> >> > +       int ret;
>> >> > +
>> >> > +       val = readl(ctl_addr);
>> >> > +       val |= PWR_ON_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +       val |= PWR_ON_2ND_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       /* wait until PWR_ACK = 1 */
>> >> > +       expired = jiffies + HZ;
>> >> > +       while (!(readl(scp->base + SPM_PWR_STATUS) & data->sta_mask) ||
>> >> > +                       !(readl(scp->base + SPM_PWR_STATUS_2ND) & data->sta_mask)) {
>> >> > +               cpu_relax();
>> >> > +               if (time_after(jiffies, expired)) {
>> >> > +                       ret = -EIO;
>> >> > +                       goto out;
>> >> > +               }
>> >> > +       }
>> >> > +
>> >> > +       val &= ~PWR_CLK_DIS_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val &= ~PWR_ISO_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val |= PWR_RST_B_BIT;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       val &= ~data->sram_pdn_bits;
>> >> > +       writel(val, ctl_addr);
>> >> > +
>> >> > +       /* wait until SRAM_PDN_ACK all 0 */
>> >> > +       expired = jiffies + HZ;
>> >> > +       while (sram_pdn_ack && (readl(ctl_addr) & sram_pdn_ack)) {
>> >>
>> >> I think "sram_pdn_ack &&" was added accidently here. It is always
>> >> bigger then zero.
>> >
>> > Nope, it's zero for MT8173_POWER_DOMAIN_MFG_ASYNC.
>>
>> In probe you turn on all power domains defined in scp_domain_data[].
>> So all but MT8173_POWER_DOMAIN_MFG_ASYNC will fail.
>> Does this make sense?
>
> What makes you think that enabling the domains will fail? That doesn't
> happen.

You are right, I got confused, seems to be the friday-effect.
Sorry for the noise.

-- 
motzblog.wordpress.com