* [PATCH v2 01/11] leds: unify the location of led-trigger API
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-28 22:33 ` Sakari Ailus
2015-03-27 13:49 ` [PATCH v2 02/11] leds: add uapi header file Jacek Anaszewski
` (7 subsequent siblings)
8 siblings, 1 reply; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
Part of led-trigger API was in the private drivers/leds/leds.h header.
Move it to the include/linux/leds.h header to unify the API location
and announce it as public. It has been already exported from
led-triggers.c with EXPORT_SYMBOL_GPL macro.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
drivers/leds/leds.h | 24 ------------------------
include/linux/leds.h | 24 ++++++++++++++++++++++++
2 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
index 79efe57..bc89d7a 100644
--- a/drivers/leds/leds.h
+++ b/drivers/leds/leds.h
@@ -13,7 +13,6 @@
#ifndef __LEDS_H_INCLUDED
#define __LEDS_H_INCLUDED
-#include <linux/device.h>
#include <linux/rwsem.h>
#include <linux/leds.h>
@@ -50,27 +49,4 @@ void led_stop_software_blink(struct led_classdev *led_cdev);
extern struct rw_semaphore leds_list_lock;
extern struct list_head leds_list;
-#ifdef CONFIG_LEDS_TRIGGERS
-void led_trigger_set_default(struct led_classdev *led_cdev);
-void led_trigger_set(struct led_classdev *led_cdev,
- struct led_trigger *trigger);
-void led_trigger_remove(struct led_classdev *led_cdev);
-
-static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
-{
- return led_cdev->trigger_data;
-}
-
-#else
-#define led_trigger_set_default(x) do {} while (0)
-#define led_trigger_set(x, y) do {} while (0)
-#define led_trigger_remove(x) do {} while (0)
-#define led_get_trigger_data(x) (NULL)
-#endif
-
-ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count);
-ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
- char *buf);
-
#endif /* __LEDS_H_INCLUDED */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 9a2b000..0579708 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -12,6 +12,7 @@
#ifndef __LINUX_LEDS_H_INCLUDED
#define __LINUX_LEDS_H_INCLUDED
+#include <linux/device.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
@@ -222,6 +223,29 @@ struct led_trigger {
struct list_head next_trig;
};
+#ifdef CONFIG_LEDS_TRIGGERS
+void led_trigger_set_default(struct led_classdev *led_cdev);
+void led_trigger_set(struct led_classdev *led_cdev,
+ struct led_trigger *trigger);
+void led_trigger_remove(struct led_classdev *led_cdev);
+
+static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
+{
+ return led_cdev->trigger_data;
+}
+
+#else
+#define led_trigger_set_default(x) do {} while (0)
+#define led_trigger_set(x, y) do {} while (0)
+#define led_trigger_remove(x) do {} while (0)
+#define led_get_trigger_data(x) (NULL)
+#endif
+
+ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
+ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
+ char *buf);
+
/* Registration functions for complex triggers */
extern int led_trigger_register(struct led_trigger *trigger);
extern void led_trigger_unregister(struct led_trigger *trigger);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v2 01/11] leds: unify the location of led-trigger API
2015-03-27 13:49 ` [PATCH v2 01/11] leds: unify the location of led-trigger API Jacek Anaszewski
@ 2015-03-28 22:33 ` Sakari Ailus
0 siblings, 0 replies; 27+ messages in thread
From: Sakari Ailus @ 2015-03-28 22:33 UTC (permalink / raw)
To: Jacek Anaszewski
Cc: linux-leds, linux-media, devicetree, kyungmin.park, pavel,
cooloney, rpurdie, s.nawrocki
On Fri, Mar 27, 2015 at 02:49:35PM +0100, Jacek Anaszewski wrote:
> Part of led-trigger API was in the private drivers/leds/leds.h header.
> Move it to the include/linux/leds.h header to unify the API location
> and announce it as public. It has been already exported from
> led-triggers.c with EXPORT_SYMBOL_GPL macro.
>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Bryan Wu <cooloney@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
--
Sakari Ailus
e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 02/11] leds: add uapi header file
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
2015-03-27 13:49 ` [PATCH v2 01/11] leds: unify the location of led-trigger API Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
[not found] ` <1427464185-27950-3-git-send-email-j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-03-27 13:49 ` [PATCH v2 03/11] leds: Add support for max77693 mfd flash cell Jacek Anaszewski
` (6 subsequent siblings)
8 siblings, 1 reply; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
This patch adds header file for LED subsystem definitions and
declarations. The initial need for the header is allowing the
user space to discover the semantics of flash fault bits.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
---
include/linux/led-class-flash.h | 16 +---------------
include/uapi/linux/leds.h | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+), 15 deletions(-)
create mode 100644 include/uapi/linux/leds.h
diff --git a/include/linux/led-class-flash.h b/include/linux/led-class-flash.h
index e97966d..3cf58c4 100644
--- a/include/linux/led-class-flash.h
+++ b/include/linux/led-class-flash.h
@@ -13,25 +13,11 @@
#define __LINUX_FLASH_LEDS_H_INCLUDED
#include <linux/leds.h>
+#include <uapi/linux/leds.h>
struct device_node;
struct led_classdev_flash;
-/*
- * Supported led fault bits - must be kept in synch
- * with V4L2_FLASH_FAULT bits.
- */
-#define LED_FAULT_OVER_VOLTAGE (1 << 0)
-#define LED_FAULT_TIMEOUT (1 << 1)
-#define LED_FAULT_OVER_TEMPERATURE (1 << 2)
-#define LED_FAULT_SHORT_CIRCUIT (1 << 3)
-#define LED_FAULT_OVER_CURRENT (1 << 4)
-#define LED_FAULT_INDICATOR (1 << 5)
-#define LED_FAULT_UNDER_VOLTAGE (1 << 6)
-#define LED_FAULT_INPUT_VOLTAGE (1 << 7)
-#define LED_FAULT_LED_OVER_TEMPERATURE (1 << 8)
-#define LED_NUM_FLASH_FAULTS 9
-
#define LED_FLASH_SYSFS_GROUPS_SIZE 5
struct led_flash_ops {
diff --git a/include/uapi/linux/leds.h b/include/uapi/linux/leds.h
new file mode 100644
index 0000000..f657f78
--- /dev/null
+++ b/include/uapi/linux/leds.h
@@ -0,0 +1,34 @@
+/*
+ * include/uapi/linux/leds.h
+ *
+ * LED subsystem specific definitions and declarations.
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef __UAPI_LINUX_LEDS_H_
+#define __UAPI_LINUX_LEDS_H_
+
+#define LED_FAULT_OVER_VOLTAGE (1 << 0)
+#define LED_FAULT_TIMEOUT (1 << 1)
+#define LED_FAULT_OVER_TEMPERATURE (1 << 2)
+#define LED_FAULT_SHORT_CIRCUIT (1 << 3)
+#define LED_FAULT_OVER_CURRENT (1 << 4)
+#define LED_FAULT_INDICATOR (1 << 5)
+#define LED_FAULT_UNDER_VOLTAGE (1 << 6)
+#define LED_FAULT_INPUT_VOLTAGE (1 << 7)
+#define LED_FAULT_LED_OVER_TEMPERATURE (1 << 8)
+#define LED_NUM_FLASH_FAULTS 9
+
+#endif /* __UAPI_LINUX_LEDS_H_ */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 03/11] leds: Add support for max77693 mfd flash cell
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
2015-03-27 13:49 ` [PATCH v2 01/11] leds: unify the location of led-trigger API Jacek Anaszewski
2015-03-27 13:49 ` [PATCH v2 02/11] leds: add uapi header file Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-28 22:45 ` Sakari Ailus
2015-03-27 13:49 ` [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693 Jacek Anaszewski
` (5 subsequent siblings)
8 siblings, 1 reply; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski, Andrzej Hajda,
Lee Jones, Chanwoo Choi
This patch adds led-flash support to Maxim max77693 chipset.
A device can be exposed to user space through LED subsystem
sysfs interface. Device supports up to two leds which can
work in flash and torch mode. The leds can be triggered
externally or by software.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-max77693.c | 973 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 984 insertions(+)
create mode 100644 drivers/leds/leds-max77693.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 966b960..f9fbeb5 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -467,6 +467,16 @@ config LEDS_TCA6507
LED driver chips accessed via the I2C bus.
Driver support brightness control and hardware-assisted blinking.
+config LEDS_MAX77693
+ tristate "LED support for MAX77693 Flash"
+ depends on LEDS_CLASS_FLASH
+ depends on MFD_MAX77693
+ depends on OF
+ help
+ This option enables support for the flash part of the MAX77693
+ multifunction device. It has build in control for two leds in flash
+ and torch mode.
+
config LEDS_MAX8997
tristate "LED support for MAX8997 PMIC"
depends on LEDS_CLASS && MFD_MAX8997
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bf46093..9413fdb 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
+obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
new file mode 100644
index 0000000..65c910d
--- /dev/null
+++ b/drivers/leds/leds-max77693.c
@@ -0,0 +1,973 @@
+/*
+ * LED Flash class driver for the flash cell of max77693 mfd.
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ *
+ * Authors: Jacek Anaszewski <j.anaszewski@samsung.com>
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <asm/div64.h>
+#include <linux/led-class-flash.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-private.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <uapi/linux/leds.h>
+
+#define MODE_OFF 0
+#define MODE_FLASH(a) (1 << (a))
+#define MODE_TORCH(a) (1 << (2 + (a)))
+#define MODE_FLASH_EXTERNAL(a) (1 << (4 + (a)))
+
+#define MODE_FLASH_MASK (MODE_FLASH(FLED1) | MODE_FLASH(FLED2) | \
+ MODE_FLASH_EXTERNAL(FLED1) | \
+ MODE_FLASH_EXTERNAL(FLED2))
+#define MODE_TORCH_MASK (MODE_TORCH(FLED1) | MODE_TORCH(FLED2))
+
+#define FLED1_IOUT (1 << 0)
+#define FLED2_IOUT (1 << 1)
+
+enum max77693_fled {
+ FLED1,
+ FLED2,
+};
+
+enum max77693_led_mode {
+ FLASH,
+ TORCH,
+};
+
+struct max77693_led_config_data {
+ const char *label[2];
+ u32 iout_torch_max[2];
+ u32 iout_flash_max[2];
+ u32 flash_timeout[2];
+ u32 num_leds;
+ u32 boost_mode;
+ u32 boost_vout;
+ u32 low_vsys;
+ u32 trigger_type;
+};
+
+struct max77693_sub_led {
+ /* corresponding FLED output identifier */
+ int fled_id;
+ /* corresponding LED Flash class device */
+ struct led_classdev_flash fled_cdev;
+ /* assures led-triggers compatibility */
+ struct work_struct work_brightness_set;
+
+ /* brightness cache */
+ unsigned int torch_brightness;
+ /* flash timeout cache */
+ unsigned int flash_timeout;
+ /* flash faults that may have occurred */
+ u32 flash_faults;
+};
+
+struct max77693_led_device {
+ /* parent mfd regmap */
+ struct regmap *regmap;
+ /* platform device data */
+ struct platform_device *pdev;
+ /* secures access to the device */
+ struct mutex lock;
+
+ /* sub led data */
+ struct max77693_sub_led sub_leds[2];
+
+ /* maximum torch current values for FLED outputs */
+ u32 iout_torch_max[2];
+ /* maximum flash current values for FLED outputs */
+ u32 iout_flash_max[2];
+ /* flash trigger type */
+ u32 trigger_type;
+
+ /* current flash timeout cache */
+ unsigned int current_flash_timeout;
+ /* ITORCH register cache */
+ u8 torch_iout_reg;
+ /* mode of fled outputs */
+ unsigned int mode_flags;
+ /* recently strobed fled */
+ int strobing_sub_led_id;
+ /* bitmask of FLED outputs use state (bit 0. - FLED1, bit 1. - FLED2) */
+ u8 fled_mask;
+ /* FLED modes that can be set */
+ u8 allowed_modes;
+
+ /* arrangement of current outputs */
+ bool iout_joint;
+};
+
+static u8 max77693_led_iout_to_reg(u32 ua)
+{
+ if (ua < FLASH_IOUT_MIN)
+ ua = FLASH_IOUT_MIN;
+ return (ua - FLASH_IOUT_MIN) / FLASH_IOUT_STEP;
+}
+
+static u8 max77693_flash_timeout_to_reg(u32 us)
+{
+ return (us - FLASH_TIMEOUT_MIN) / FLASH_TIMEOUT_STEP;
+}
+
+static inline struct max77693_sub_led *flcdev_to_sub_led(
+ struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct max77693_sub_led, fled_cdev);
+}
+
+static inline struct max77693_led_device *sub_led_to_led(
+ struct max77693_sub_led *sub_led)
+{
+ return container_of(sub_led, struct max77693_led_device,
+ sub_leds[sub_led->fled_id]);
+}
+
+static inline u8 max77693_led_vsys_to_reg(u32 mv)
+{
+ return ((mv - MAX_FLASH1_VSYS_MIN) / MAX_FLASH1_VSYS_STEP) << 2;
+}
+
+static inline u8 max77693_led_vout_to_reg(u32 mv)
+{
+ return (mv - FLASH_VOUT_MIN) / FLASH_VOUT_STEP + FLASH_VOUT_RMIN;
+}
+
+static inline bool max77693_fled_used(struct max77693_led_device *led,
+ int fled_id)
+{
+ u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
+
+ return led->fled_mask & fled_bit;
+}
+
+static int max77693_set_mode_reg(struct max77693_led_device *led, u8 mode)
+{
+ struct regmap *rmap = led->regmap;
+ int ret, v = 0, i;
+
+ for (i = FLED1; i <= FLED2; ++i) {
+ if (mode & MODE_TORCH(i))
+ v |= FLASH_EN_ON << TORCH_EN_SHIFT(i);
+
+ if (mode & MODE_FLASH(i)) {
+ v |= FLASH_EN_ON << FLASH_EN_SHIFT(i);
+ } else if (mode & MODE_FLASH_EXTERNAL(i)) {
+ v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(i);
+ /*
+ * Enable hw triggering also for torch mode, as some
+ * camera sensors use torch led to fathom ambient light
+ * conditions before strobing the flash.
+ */
+ v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(i);
+ }
+ }
+
+ /* Reset the register only prior setting flash modes */
+ if (mode & ~(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))) {
+ ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, v);
+}
+
+static int max77693_add_mode(struct max77693_led_device *led, u8 mode)
+{
+ int i, ret;
+
+ mode &= led->allowed_modes;
+
+ /*
+ * Torch mode once enabled remains active until turned off. If the FLED2
+ * output isn't to be disabled check if the torch mode to be set isn't
+ * already activated and avoid re-setting it.
+ */
+ if ((!(mode ^ led->mode_flags)) & MODE_TORCH(FLED2)) {
+ for (i = FLED1; i <= FLED2; ++i)
+ if ((mode & led->mode_flags & MODE_TORCH(i)))
+ return 0;
+ }
+
+ if (led->iout_joint)
+ /* Span the mode on FLED2 for joint iouts case */
+ mode |= (mode << 1);
+
+ /*
+ * FLASH_EXTERNAL mode activates FLASHEN and TORCHEN pins in the device.
+ * Corresponding register bit fields interfere with SW triggered modes,
+ * thus clear them to ensure proper device configuration.
+ */
+ for (i = FLED1; i <= FLED2; ++i)
+ if (mode & MODE_FLASH_EXTERNAL(i))
+ led->mode_flags &= (~MODE_TORCH(i) & ~MODE_FLASH(i));
+
+ led->mode_flags |= mode;
+ led->mode_flags &= led->allowed_modes;
+
+ ret = max77693_set_mode_reg(led, led->mode_flags);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Clear flash mode flag after setting the mode to avoid spurious flash
+ * strobing on each subsequent torch mode setting.
+ */
+ if (mode & MODE_FLASH_MASK)
+ led->mode_flags &= ~mode;
+
+ return ret;
+}
+
+static int max77693_clear_mode(struct max77693_led_device *led,
+ u8 mode)
+{
+ if (led->iout_joint)
+ /* Clear mode also on FLED2 for joint iouts case */
+ mode |= (mode << 1);
+
+ led->mode_flags &= ~mode;
+
+ return max77693_set_mode_reg(led, led->mode_flags);
+}
+
+static void max77693_add_allowed_modes(struct max77693_led_device *led,
+ int fled_id, enum max77693_led_mode mode)
+{
+ if (mode == FLASH)
+ led->allowed_modes |= (MODE_FLASH(fled_id) |
+ MODE_FLASH_EXTERNAL(fled_id));
+ else
+ led->allowed_modes |= MODE_TORCH(fled_id);
+}
+
+static void max77693_distribute_currents(struct max77693_led_device *led,
+ int fled_id, enum max77693_led_mode mode,
+ u32 micro_amp, u32 iout_max[2], u32 iout[2])
+{
+ if (!led->iout_joint) {
+ iout[fled_id] = micro_amp;
+ max77693_add_allowed_modes(led, fled_id, mode);
+ return;
+ }
+
+ iout[FLED1] = min(micro_amp, iout_max[FLED1]);
+ iout[FLED2] = micro_amp - iout[FLED1];
+
+ if (mode == FLASH)
+ led->allowed_modes &= ~MODE_FLASH_MASK;
+ else
+ led->allowed_modes &= ~MODE_TORCH_MASK;
+
+ max77693_add_allowed_modes(led, FLED1, mode);
+
+ if (iout[FLED2])
+ max77693_add_allowed_modes(led, FLED2, mode);
+}
+
+static int max77693_set_torch_current(struct max77693_led_device *led,
+ int fled_id, u32 micro_amp)
+{
+ struct regmap *rmap = led->regmap;
+ u8 iout1_reg = 0, iout2_reg = 0;
+ u32 iout[2];
+
+ max77693_distribute_currents(led, fled_id, TORCH, micro_amp,
+ led->iout_torch_max, iout);
+
+ if (fled_id == FLED1 || led->iout_joint) {
+ iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
+ led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT2_SHIFT);
+ }
+ if (fled_id == FLED2 || led->iout_joint) {
+ iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
+ led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT1_SHIFT);
+ }
+
+ led->torch_iout_reg |= ((iout1_reg << TORCH_IOUT1_SHIFT) |
+ (iout2_reg << TORCH_IOUT2_SHIFT));
+
+ return regmap_write(rmap, MAX77693_LED_REG_ITORCH,
+ led->torch_iout_reg);
+}
+
+static int max77693_set_flash_current(struct max77693_led_device *led,
+ int fled_id,
+ u32 micro_amp)
+{
+ struct regmap *rmap = led->regmap;
+ u8 iout1_reg, iout2_reg;
+ u32 iout[2];
+ int ret = -EINVAL;
+
+ max77693_distribute_currents(led, fled_id, FLASH, micro_amp,
+ led->iout_flash_max, iout);
+
+ if (fled_id == FLED1 || led->iout_joint) {
+ iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
+ ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH1,
+ iout1_reg);
+ if (ret < 0)
+ return ret;
+ }
+ if (fled_id == FLED2 || led->iout_joint) {
+ iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
+ ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH2,
+ iout2_reg);
+ }
+
+ return ret;
+}
+
+static int max77693_set_timeout(struct max77693_led_device *led, u32 microsec)
+{
+ struct regmap *rmap = led->regmap;
+ u8 v;
+ int ret;
+
+ v = max77693_flash_timeout_to_reg(microsec);
+
+ if (led->trigger_type == MAX77693_LED_TRIG_TYPE_LEVEL)
+ v |= FLASH_TMR_LEVEL;
+
+ ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_TIMER, v);
+ if (ret < 0)
+ return ret;
+
+ led->current_flash_timeout = microsec;
+
+ return 0;
+}
+
+static int max77693_get_strobe_status(struct max77693_led_device *led,
+ bool *state)
+{
+ struct regmap *rmap = led->regmap;
+ unsigned int v;
+ int ret;
+
+ ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_STATUS, &v);
+ if (ret < 0)
+ return ret;
+
+ *state = v & FLASH_STATUS_FLASH_ON;
+
+ return ret;
+}
+
+static int max77693_get_flash_faults(struct max77693_sub_led *sub_led)
+{
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ struct regmap *rmap = led->regmap;
+ unsigned int v;
+ u8 fault_open_mask, fault_short_mask;
+ int ret;
+
+ sub_led->flash_faults = 0;
+
+ if (led->iout_joint) {
+ fault_open_mask = FLASH_INT_FLED1_OPEN | FLASH_INT_FLED2_OPEN;
+ fault_short_mask = FLASH_INT_FLED1_SHORT |
+ FLASH_INT_FLED2_SHORT;
+ } else {
+ fault_open_mask = (sub_led->fled_id == FLED1) ?
+ FLASH_INT_FLED1_OPEN :
+ FLASH_INT_FLED2_OPEN;
+ fault_short_mask = (sub_led->fled_id == FLED1) ?
+ FLASH_INT_FLED1_SHORT :
+ FLASH_INT_FLED2_SHORT;
+ }
+
+ ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_INT, &v);
+ if (ret < 0)
+ return ret;
+
+ if (v & fault_open_mask)
+ sub_led->flash_faults |= LED_FAULT_OVER_VOLTAGE;
+ if (v & fault_short_mask)
+ sub_led->flash_faults |= LED_FAULT_SHORT_CIRCUIT;
+ if (v & FLASH_INT_OVER_CURRENT)
+ sub_led->flash_faults |= LED_FAULT_OVER_CURRENT;
+
+ return 0;
+}
+
+static int max77693_setup(struct max77693_led_device *led,
+ struct max77693_led_config_data *led_cfg)
+{
+ struct regmap *rmap = led->regmap;
+ int i, first_led, last_led, ret;
+ u32 max_flash_curr[2];
+ u8 v;
+
+ /*
+ * Initialize only flash current. Torch current doesn't
+ * require initialization as ITORCH register is written with
+ * new value each time brightness_set op is called.
+ */
+ if (led->iout_joint) {
+ first_led = FLED1;
+ last_led = FLED1;
+ max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1] +
+ led_cfg->iout_flash_max[FLED2];
+ } else {
+ first_led = max77693_fled_used(led, FLED1) ? FLED1 : FLED2;
+ last_led = max77693_fled_used(led, FLED2) ? FLED2 : FLED1;
+ max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1];
+ max_flash_curr[FLED2] = led_cfg->iout_flash_max[FLED2];
+ }
+
+ for (i = first_led; i <= last_led; ++i) {
+ ret = max77693_set_flash_current(led, i,
+ max_flash_curr[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ v = TORCH_TMR_NO_TIMER | MAX77693_LED_TRIG_TYPE_LEVEL;
+ ret = regmap_write(rmap, MAX77693_LED_REG_ITORCHTIMER, v);
+ if (ret < 0)
+ return ret;
+
+ if (led_cfg->low_vsys > 0)
+ v = max77693_led_vsys_to_reg(led_cfg->low_vsys) |
+ MAX_FLASH1_MAX_FL_EN;
+ else
+ v = 0;
+
+ ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH1, v);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH2, 0);
+ if (ret < 0)
+ return ret;
+
+ if (led_cfg->boost_mode == MAX77693_LED_BOOST_FIXED)
+ v = FLASH_BOOST_FIXED;
+ else
+ v = led_cfg->boost_mode | led_cfg->boost_mode << 1;
+
+ if (max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
+ v |= FLASH_BOOST_LEDNUM_2;
+
+ ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_CNTL, v);
+ if (ret < 0)
+ return ret;
+
+ v = max77693_led_vout_to_reg(led_cfg->boost_vout);
+ ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_FLASH1, v);
+ if (ret < 0)
+ return ret;
+
+ return max77693_set_mode_reg(led, MODE_OFF);
+}
+
+static int __max77693_led_brightness_set(struct max77693_led_device *led,
+ int fled_id, enum led_brightness value)
+{
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ if (value == 0) {
+ ret = max77693_clear_mode(led, MODE_TORCH(fled_id));
+ if (ret < 0)
+ dev_dbg(&led->pdev->dev,
+ "Failed to clear torch mode (%d)\n",
+ ret);
+ goto unlock;
+ }
+
+ ret = max77693_set_torch_current(led, fled_id, value * TORCH_IOUT_STEP);
+ if (ret < 0) {
+ dev_dbg(&led->pdev->dev,
+ "Failed to set torch current (%d)\n",
+ ret);
+ goto unlock;
+ }
+
+ ret = max77693_add_mode(led, MODE_TORCH(fled_id));
+ if (ret < 0)
+ dev_dbg(&led->pdev->dev,
+ "Failed to set torch mode (%d)\n",
+ ret);
+unlock:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static void max77693_led_brightness_set_work(
+ struct work_struct *work)
+{
+ struct max77693_sub_led *sub_led =
+ container_of(work, struct max77693_sub_led,
+ work_brightness_set);
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+ __max77693_led_brightness_set(led, sub_led->fled_id,
+ sub_led->torch_brightness);
+}
+
+/* LED subsystem callbacks */
+
+static int max77693_led_brightness_set_sync(
+ struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+ return __max77693_led_brightness_set(led, sub_led->fled_id, value);
+}
+
+static void max77693_led_brightness_set(
+ struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+
+ sub_led->torch_brightness = value;
+ schedule_work(&sub_led->work_brightness_set);
+}
+
+static int max77693_led_flash_brightness_set(
+ struct led_classdev_flash *fled_cdev,
+ u32 brightness)
+{
+ struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ int ret;
+
+ mutex_lock(&led->lock);
+ ret = max77693_set_flash_current(led, sub_led->fled_id, brightness);
+ mutex_unlock(&led->lock);
+
+ return ret;
+}
+
+static int max77693_led_flash_strobe_set(
+ struct led_classdev_flash *fled_cdev,
+ bool state)
+{
+ struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ int fled_id = sub_led->fled_id;
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ if (!state) {
+ ret = max77693_clear_mode(led, MODE_FLASH(fled_id));
+ goto unlock;
+ }
+
+ if (sub_led->flash_timeout != led->current_flash_timeout) {
+ ret = max77693_set_timeout(led, sub_led->flash_timeout);
+ if (ret < 0)
+ goto unlock;
+ }
+
+ led->strobing_sub_led_id = fled_id;
+
+ ret = max77693_add_mode(led, MODE_FLASH(fled_id));
+ if (ret < 0)
+ goto unlock;
+
+ ret = max77693_get_flash_faults(sub_led);
+
+unlock:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int max77693_led_flash_fault_get(
+ struct led_classdev_flash *fled_cdev,
+ u32 *fault)
+{
+ struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+
+ *fault = sub_led->flash_faults;
+
+ return 0;
+}
+
+static int max77693_led_flash_strobe_get(
+ struct led_classdev_flash *fled_cdev,
+ bool *state)
+{
+ struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ int ret;
+
+ if (!state)
+ return -EINVAL;
+
+ mutex_lock(&led->lock);
+
+ ret = max77693_get_strobe_status(led, state);
+
+ *state = !!(*state && (led->strobing_sub_led_id == sub_led->fled_id));
+
+ mutex_unlock(&led->lock);
+
+ return ret;
+}
+
+static int max77693_led_flash_timeout_set(
+ struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+ mutex_lock(&led->lock);
+ sub_led->flash_timeout = timeout;
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int max77693_led_parse_dt(struct max77693_led_device *led,
+ struct max77693_led_config_data *cfg)
+{
+ struct device *dev = &led->pdev->dev;
+ struct max77693_sub_led *sub_leds = led->sub_leds;
+ struct device_node *node = dev->of_node, *child_node;
+ struct property *prop;
+ u32 led_sources[2];
+ int i, fled_id;
+
+ of_property_read_u32(node, "maxim,trigger-type", &cfg->trigger_type);
+ of_property_read_u32(node, "maxim,boost-mode", &cfg->boost_mode);
+ of_property_read_u32(node, "maxim,boost-mvout", &cfg->boost_vout);
+ of_property_read_u32(node, "maxim,mvsys-min", &cfg->low_vsys);
+
+ for_each_available_child_of_node(node, child_node) {
+ prop = of_find_property(child_node, "led-sources", NULL);
+ if (prop) {
+ const __be32 *srcs = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
+ srcs = of_prop_next_u32(prop, srcs,
+ &led_sources[i]);
+ if (!srcs)
+ break;
+ }
+ } else {
+ dev_err(dev,
+ "\"led-sources\" DT property not found.\n");
+ return -EINVAL;
+ }
+
+ if (i == 2) {
+ fled_id = FLED1;
+ led->fled_mask = FLED1_IOUT | FLED2_IOUT;
+ } else if (led_sources[0] == FLED1) {
+ fled_id = FLED1;
+ led->fled_mask |= FLED1_IOUT;
+ } else if (led_sources[0] == FLED2) {
+ fled_id = FLED2;
+ led->fled_mask |= FLED2_IOUT;
+ } else {
+ dev_err(dev,
+ "Wrong \"led-sources\" DT property value.\n");
+ return -EINVAL;
+ }
+
+ sub_leds[fled_id].fled_id = fled_id;
+
+ cfg->label[fled_id] =
+ of_get_property(child_node, "label", NULL) ? :
+ child_node->name;
+
+ of_property_read_u32(child_node, "max-microamp",
+ &cfg->iout_torch_max[fled_id]);
+ of_property_read_u32(child_node, "flash-max-microamp",
+ &cfg->iout_flash_max[fled_id]);
+ of_property_read_u32(child_node, "flash-timeout-us",
+ &cfg->flash_timeout[fled_id]);
+
+ if (++cfg->num_leds == 2 ||
+ (max77693_fled_used(led, FLED1) &&
+ max77693_fled_used(led, FLED2)))
+ break;
+ }
+
+ if (cfg->num_leds == 0) {
+ dev_err(dev, "No DT child node found for connected LED(s).\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void clamp_align(u32 *v, u32 min, u32 max, u32 step)
+{
+ *v = clamp_val(*v, min, max);
+ if (step > 1)
+ *v = (*v - min) / step * step + min;
+}
+
+static void max77693_led_validate_configuration(struct max77693_led_device *led,
+ struct max77693_led_config_data *cfg)
+{
+ int i;
+
+ if (cfg->num_leds == 1 &&
+ max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
+ led->iout_joint = true;
+
+ cfg->boost_mode = clamp_val(cfg->boost_mode, MAX77693_LED_BOOST_NONE,
+ MAX77693_LED_BOOST_FIXED);
+
+ /* Boost must be enabled if both current outputs are used */
+ if ((cfg->boost_mode == MAX77693_LED_BOOST_NONE) && led->iout_joint)
+ cfg->boost_mode = MAX77693_LED_BOOST_FIXED;
+
+ /* Split max current settings to both outputs in case of joint leds */
+ if (led->iout_joint) {
+ cfg->iout_torch_max[FLED1] /= 2;
+ cfg->iout_torch_max[FLED2] = cfg->iout_torch_max[FLED1];
+ cfg->iout_flash_max[FLED1] /= 2;
+ cfg->iout_flash_max[FLED2] = cfg->iout_flash_max[FLED1];
+ }
+
+ for (i = FLED1; i <= FLED2; ++i) {
+ if (max77693_fled_used(led, i)) {
+ clamp_align(&cfg->iout_torch_max[i], TORCH_IOUT_MIN,
+ TORCH_IOUT_MAX, TORCH_IOUT_STEP);
+ clamp_align(&cfg->iout_flash_max[i], FLASH_IOUT_MIN,
+ cfg->boost_mode ? FLASH_IOUT_MAX_2LEDS :
+ FLASH_IOUT_MAX_1LED,
+ FLASH_IOUT_STEP);
+ } else {
+ cfg->iout_torch_max[i] = cfg->iout_flash_max[i] = 0;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cfg->flash_timeout); ++i)
+ clamp_align(&cfg->flash_timeout[i], FLASH_TIMEOUT_MIN,
+ FLASH_TIMEOUT_MAX, FLASH_TIMEOUT_STEP);
+
+ cfg->trigger_type = clamp_val(cfg->trigger_type,
+ MAX77693_LED_TRIG_TYPE_EDGE,
+ MAX77693_LED_TRIG_TYPE_LEVEL);
+
+ clamp_align(&cfg->boost_vout, FLASH_VOUT_MIN, FLASH_VOUT_MAX,
+ FLASH_VOUT_STEP);
+
+ if (cfg->low_vsys)
+ clamp_align(&cfg->low_vsys, MAX_FLASH1_VSYS_MIN,
+ MAX_FLASH1_VSYS_MAX, MAX_FLASH1_VSYS_STEP);
+}
+
+static int max77693_led_get_configuration(struct max77693_led_device *led,
+ struct max77693_led_config_data *cfg)
+{
+ int ret;
+
+ ret = max77693_led_parse_dt(led, cfg);
+ if (ret < 0)
+ return ret;
+
+ max77693_led_validate_configuration(led, cfg);
+
+ memcpy(led->iout_torch_max, cfg->iout_torch_max,
+ sizeof(led->iout_torch_max));
+ memcpy(led->iout_flash_max, cfg->iout_flash_max,
+ sizeof(led->iout_flash_max));
+ led->trigger_type = cfg->trigger_type;
+
+ return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .flash_brightness_set = max77693_led_flash_brightness_set,
+ .strobe_set = max77693_led_flash_strobe_set,
+ .strobe_get = max77693_led_flash_strobe_get,
+ .timeout_set = max77693_led_flash_timeout_set,
+ .fault_get = max77693_led_flash_fault_get,
+};
+
+static void max77693_init_flash_settings(struct max77693_sub_led *sub_led,
+ struct max77693_led_config_data *led_cfg)
+{
+ struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ int fled_id = sub_led->fled_id;
+ struct led_flash_setting *setting;
+
+ /* Init flash intensity setting */
+ setting = &fled_cdev->brightness;
+ setting->min = FLASH_IOUT_MIN;
+ setting->max = led->iout_joint ?
+ led_cfg->iout_flash_max[FLED1] * 2 :
+ led_cfg->iout_flash_max[fled_id];
+ setting->step = FLASH_IOUT_STEP;
+ setting->val = setting->max;
+
+ /* Init flash timeout setting */
+ setting = &fled_cdev->timeout;
+ setting->min = FLASH_TIMEOUT_MIN;
+ setting->max = led_cfg->flash_timeout[fled_id];
+ setting->step = FLASH_TIMEOUT_STEP;
+ setting->val = setting->max;
+}
+
+static void max77693_init_fled_cdev(struct max77693_sub_led *sub_led,
+ struct max77693_led_config_data *led_cfg)
+{
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ int fled_id = sub_led->fled_id;
+ struct led_classdev_flash *fled_cdev;
+ struct led_classdev *led_cdev;
+
+ /* Initialize LED Flash class device */
+ fled_cdev = &sub_led->fled_cdev;
+ fled_cdev->ops = &flash_ops;
+ led_cdev = &fled_cdev->led_cdev;
+
+ led_cdev->name = led_cfg->label[fled_id];
+
+ led_cdev->brightness_set = max77693_led_brightness_set;
+ led_cdev->brightness_set_sync = max77693_led_brightness_set_sync;
+ led_cdev->max_brightness = (led->iout_joint ?
+ led_cfg->iout_torch_max[FLED1] * 2 :
+ led_cfg->iout_torch_max[fled_id]) /
+ TORCH_IOUT_STEP;
+ led_cdev->flags |= LED_DEV_CAP_FLASH;
+ INIT_WORK(&sub_led->work_brightness_set,
+ max77693_led_brightness_set_work);
+
+ max77693_init_flash_settings(sub_led, led_cfg);
+
+ /* Init flash timeout cache */
+ sub_led->flash_timeout = fled_cdev->timeout.val;
+}
+
+static int max77693_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
+ struct max77693_led_device *led;
+ struct max77693_sub_led *sub_leds;
+ struct max77693_led_config_data led_cfg = {};
+ int init_fled_cdev[2], i, ret;
+
+ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->pdev = pdev;
+ led->regmap = iodev->regmap;
+ led->allowed_modes = MODE_FLASH_MASK;
+ sub_leds = led->sub_leds;
+
+ platform_set_drvdata(pdev, led);
+ ret = max77693_led_get_configuration(led, &led_cfg);
+ if (ret < 0)
+ return ret;
+
+ ret = max77693_setup(led, &led_cfg);
+ if (ret < 0)
+ return ret;
+
+ mutex_init(&led->lock);
+
+ init_fled_cdev[FLED1] =
+ led->iout_joint || max77693_fled_used(led, FLED1);
+ init_fled_cdev[FLED2] =
+ !led->iout_joint && max77693_fled_used(led, FLED2);
+
+ /* Initialize LED Flash class device(s) */
+ for (i = FLED1; i <= FLED2; ++i)
+ if (init_fled_cdev[i])
+ max77693_init_fled_cdev(&sub_leds[i], &led_cfg);
+
+
+ /* Register LED Flash class device(s) */
+ for (i = FLED1; i <= FLED2; ++i) {
+ if (!init_fled_cdev[i])
+ continue;
+
+ ret = led_classdev_flash_register(dev, &sub_leds[i].fled_cdev);
+ if (ret < 0) {
+ /*
+ * At this moment FLED1 might have been already
+ * registered and it needs to be released.
+ */
+ if (i == FLED2)
+ goto err_register_led2;
+ else
+ goto err_register_led1;
+ }
+ }
+
+ return 0;
+
+err_register_led2:
+ /* It is possible than only FLED2 was to be registered */
+ if (!init_fled_cdev[FLED1])
+ goto err_register_led1;
+ led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+err_register_led1:
+ mutex_destroy(&led->lock);
+
+ return ret;
+}
+
+static int max77693_led_remove(struct platform_device *pdev)
+{
+ struct max77693_led_device *led = platform_get_drvdata(pdev);
+ struct max77693_sub_led *sub_leds = led->sub_leds;
+
+ if (led->iout_joint || max77693_fled_used(led, FLED1)) {
+ led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+ cancel_work_sync(&sub_leds[FLED1].work_brightness_set);
+ }
+
+ if (!led->iout_joint && max77693_fled_used(led, FLED2)) {
+ led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
+ cancel_work_sync(&sub_leds[FLED2].work_brightness_set);
+ }
+
+ mutex_destroy(&led->lock);
+
+ return 0;
+}
+
+static const struct of_device_id max77693_led_dt_match[] = {
+ {.compatible = "maxim,max77693-led"},
+ {},
+};
+
+static struct platform_driver max77693_led_driver = {
+ .probe = max77693_led_probe,
+ .remove = max77693_led_remove,
+ .driver = {
+ .name = "max77693-led",
+ .owner = THIS_MODULE,
+ .of_match_table = max77693_led_dt_match,
+ },
+};
+
+module_platform_driver(max77693_led_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX77693 led flash driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v2 03/11] leds: Add support for max77693 mfd flash cell
2015-03-27 13:49 ` [PATCH v2 03/11] leds: Add support for max77693 mfd flash cell Jacek Anaszewski
@ 2015-03-28 22:45 ` Sakari Ailus
0 siblings, 0 replies; 27+ messages in thread
From: Sakari Ailus @ 2015-03-28 22:45 UTC (permalink / raw)
To: Jacek Anaszewski
Cc: linux-leds, linux-media, devicetree, kyungmin.park, pavel,
cooloney, rpurdie, s.nawrocki, Andrzej Hajda, Lee Jones,
Chanwoo Choi
Hi Jacek,
On Fri, Mar 27, 2015 at 02:49:37PM +0100, Jacek Anaszewski wrote:
> This patch adds led-flash support to Maxim max77693 chipset.
> A device can be exposed to user space through LED subsystem
> sysfs interface. Device supports up to two leds which can
> work in flash and torch mode. The leds can be triggered
> externally or by software.
>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Bryan Wu <cooloney@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
...
> diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
> new file mode 100644
> index 0000000..65c910d
> --- /dev/null
> +++ b/drivers/leds/leds-max77693.c
> @@ -0,0 +1,973 @@
> +/*
> + * LED Flash class driver for the flash cell of max77693 mfd.
> + *
> + * Copyright (C) 2015, Samsung Electronics Co., Ltd.
> + *
> + * Authors: Jacek Anaszewski <j.anaszewski@samsung.com>
> + * Andrzej Hajda <a.hajda@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <asm/div64.h>
You might not need this anymore.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
--
Sakari Ailus
e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
` (2 preceding siblings ...)
2015-03-27 13:49 ` [PATCH v2 03/11] leds: Add support for max77693 mfd flash cell Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-27 14:06 ` Jacek Anaszewski
2015-03-28 22:55 ` Sakari Ailus
2015-03-27 13:49 ` [PATCH v2 05/11] leds: Add driver for AAT1290 flash LED controller Jacek Anaszewski
` (4 subsequent siblings)
8 siblings, 2 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski, Andrzej Hajda,
Lee Jones, Chanwoo Choi
This patch adds device tree binding documentation for
the flash cell of the Maxim max77693 multifunctional device.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
Documentation/devicetree/bindings/mfd/max77693.txt | 61 ++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
index 38e6440..15c546ea 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -76,7 +76,53 @@ Optional properties:
Valid values: 4300000, 4700000, 4800000, 4900000
Default: 4300000
+- led : the LED submodule device node
+
+There are two LED outputs available - FLED1 and FLED2. Each of them can
+control a separate LED or they can be connected together to double
+the maximum current for a single connected LED. One LED is represented
+by one child node.
+
+Required properties:
+- compatible : Must be "maxim,max77693-led".
+
+Optional properties:
+- maxim,trigger-type : Flash trigger type.
+ Possible trigger types:
+ LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal triggers
+ the flash,
+ LEDS_TRIG_TYPE_LEVEL (1) - Strobe pulse length controls duration
+ of the flash.
+- maxim,boost-mode :
+ In boost mode the device can produce up to 1.2A of total current
+ on both outputs. The maximum current on each output is reduced
+ to 625mA then. If not enabled explicitly, boost setting defaults to
+ LEDS_BOOST_FIXED in case both current sources are used.
+ Possible values:
+ LEDS_BOOST_OFF (0) - no boost,
+ LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
+ LEDS_BOOST_FIXED (2) - fixed mode.
+- maxim,boost-mvout : Output voltage of the boost module in millivolts.
+- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
+ if chip estimates that system voltage could drop below this level due
+ to flash power consumption.
+
+Required properties of the LED child node:
+- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
+ device current output identifiers: 0 - FLED1, 1 - FLED2
+
+Optional properties of the LED child node:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+ Range: 15625 - 250000
+- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+ Range: 15625 - 1000000
+- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+ Range: 62500 - 1000000
+
Example:
+#include <dt-bindings/leds/common.h>
+
max77693@66 {
compatible = "maxim,max77693";
reg = <0x66>;
@@ -117,5 +163,20 @@ Example:
maxim,thermal-regulation-celsius = <75>;
maxim,battery-overcurrent-microamp = <3000000>;
maxim,charge-input-threshold-microvolt = <4300000>;
+
+ led {
+ compatible = "maxim,max77693-led";
+ maxim,trigger-type = <LEDS_TRIG_TYPE_LEVEL>;
+ maxim,boost-mode = <LEDS_BOOST_FIXED>;
+ maxim,boost-mvout = <5000>;
+ maxim,mvsys-min = <2400>;
+
+ camera_flash: flash-led {
+ label = "max77693-flash";
+ led-sources = <0>, <1>;
+ max-microamp = <500000>;
+ flash-max-microamp = <1250000>;
+ flash-timeout-us = <1000000>;
+ };
};
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693
2015-03-27 13:49 ` [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693 Jacek Anaszewski
@ 2015-03-27 14:06 ` Jacek Anaszewski
2015-03-28 22:55 ` Sakari Ailus
1 sibling, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 14:06 UTC (permalink / raw)
To: Rob Herring
Cc: Jacek Anaszewski, linux-leds, linux-media, devicetree,
kyungmin.park, pavel, cooloney, rpurdie, sakari.ailus,
s.nawrocki, Andrzej Hajda, Lee Jones, Chanwoo Choi
Hi Rob,
This patch has been around for a long time already and has
undergone several modifications in response to review
remarks. It lacks only DT maintainer's Ack.
Could you express your opinion, please?
On 03/27/2015 02:49 PM, Jacek Anaszewski wrote:
> This patch adds device tree binding documentation for
> the flash cell of the Maxim max77693 multifunctional device.
>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Bryan Wu <cooloney@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> ---
> Documentation/devicetree/bindings/mfd/max77693.txt | 61 ++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
> index 38e6440..15c546ea 100644
> --- a/Documentation/devicetree/bindings/mfd/max77693.txt
> +++ b/Documentation/devicetree/bindings/mfd/max77693.txt
> @@ -76,7 +76,53 @@ Optional properties:
> Valid values: 4300000, 4700000, 4800000, 4900000
> Default: 4300000
>
> +- led : the LED submodule device node
> +
> +There are two LED outputs available - FLED1 and FLED2. Each of them can
> +control a separate LED or they can be connected together to double
> +the maximum current for a single connected LED. One LED is represented
> +by one child node.
> +
> +Required properties:
> +- compatible : Must be "maxim,max77693-led".
> +
> +Optional properties:
> +- maxim,trigger-type : Flash trigger type.
> + Possible trigger types:
> + LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal triggers
> + the flash,
> + LEDS_TRIG_TYPE_LEVEL (1) - Strobe pulse length controls duration
> + of the flash.
> +- maxim,boost-mode :
> + In boost mode the device can produce up to 1.2A of total current
> + on both outputs. The maximum current on each output is reduced
> + to 625mA then. If not enabled explicitly, boost setting defaults to
> + LEDS_BOOST_FIXED in case both current sources are used.
> + Possible values:
> + LEDS_BOOST_OFF (0) - no boost,
> + LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
> + LEDS_BOOST_FIXED (2) - fixed mode.
> +- maxim,boost-mvout : Output voltage of the boost module in millivolts.
> +- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
> + if chip estimates that system voltage could drop below this level due
> + to flash power consumption.
> +
> +Required properties of the LED child node:
> +- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
> + device current output identifiers: 0 - FLED1, 1 - FLED2
> +
> +Optional properties of the LED child node:
> +- label : see Documentation/devicetree/bindings/leds/common.txt
> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> + Range: 15625 - 250000
> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> + Range: 15625 - 1000000
> +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
> + Range: 62500 - 1000000
> +
> Example:
> +#include <dt-bindings/leds/common.h>
> +
> max77693@66 {
> compatible = "maxim,max77693";
> reg = <0x66>;
> @@ -117,5 +163,20 @@ Example:
> maxim,thermal-regulation-celsius = <75>;
> maxim,battery-overcurrent-microamp = <3000000>;
> maxim,charge-input-threshold-microvolt = <4300000>;
> +
> + led {
> + compatible = "maxim,max77693-led";
> + maxim,trigger-type = <LEDS_TRIG_TYPE_LEVEL>;
> + maxim,boost-mode = <LEDS_BOOST_FIXED>;
> + maxim,boost-mvout = <5000>;
> + maxim,mvsys-min = <2400>;
> +
> + camera_flash: flash-led {
> + label = "max77693-flash";
> + led-sources = <0>, <1>;
> + max-microamp = <500000>;
> + flash-max-microamp = <1250000>;
> + flash-timeout-us = <1000000>;
> + };
> };
> };
>
--
Best Regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693
2015-03-27 13:49 ` [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693 Jacek Anaszewski
2015-03-27 14:06 ` Jacek Anaszewski
@ 2015-03-28 22:55 ` Sakari Ailus
2015-03-30 7:36 ` Jacek Anaszewski
1 sibling, 1 reply; 27+ messages in thread
From: Sakari Ailus @ 2015-03-28 22:55 UTC (permalink / raw)
To: Jacek Anaszewski
Cc: linux-leds, linux-media, devicetree, kyungmin.park, pavel,
cooloney, rpurdie, s.nawrocki, Andrzej Hajda, Lee Jones,
Chanwoo Choi
On Fri, Mar 27, 2015 at 02:49:38PM +0100, Jacek Anaszewski wrote:
> This patch adds device tree binding documentation for
> the flash cell of the Maxim max77693 multifunctional device.
>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Bryan Wu <cooloney@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> ---
> Documentation/devicetree/bindings/mfd/max77693.txt | 61 ++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
> index 38e6440..15c546ea 100644
> --- a/Documentation/devicetree/bindings/mfd/max77693.txt
> +++ b/Documentation/devicetree/bindings/mfd/max77693.txt
> @@ -76,7 +76,53 @@ Optional properties:
> Valid values: 4300000, 4700000, 4800000, 4900000
> Default: 4300000
>
> +- led : the LED submodule device node
> +
> +There are two LED outputs available - FLED1 and FLED2. Each of them can
> +control a separate LED or they can be connected together to double
> +the maximum current for a single connected LED. One LED is represented
> +by one child node.
> +
> +Required properties:
> +- compatible : Must be "maxim,max77693-led".
> +
> +Optional properties:
> +- maxim,trigger-type : Flash trigger type.
> + Possible trigger types:
> + LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal triggers
> + the flash,
> + LEDS_TRIG_TYPE_LEVEL (1) - Strobe pulse length controls duration
> + of the flash.
> +- maxim,boost-mode :
> + In boost mode the device can produce up to 1.2A of total current
> + on both outputs. The maximum current on each output is reduced
> + to 625mA then. If not enabled explicitly, boost setting defaults to
> + LEDS_BOOST_FIXED in case both current sources are used.
> + Possible values:
> + LEDS_BOOST_OFF (0) - no boost,
> + LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
> + LEDS_BOOST_FIXED (2) - fixed mode.
> +- maxim,boost-mvout : Output voltage of the boost module in millivolts.
What are the possible values for this?
Is the datasheet publicly available btw.?
> +- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
> + if chip estimates that system voltage could drop below this level due
> + to flash power consumption.
> +
> +Required properties of the LED child node:
> +- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
> + device current output identifiers: 0 - FLED1, 1 - FLED2
> +
> +Optional properties of the LED child node:
> +- label : see Documentation/devicetree/bindings/leds/common.txt
> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> + Range: 15625 - 250000
> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> + Range: 15625 - 1000000
> +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
> + Range: 62500 - 1000000
> +
> Example:
> +#include <dt-bindings/leds/common.h>
> +
> max77693@66 {
> compatible = "maxim,max77693";
> reg = <0x66>;
> @@ -117,5 +163,20 @@ Example:
> maxim,thermal-regulation-celsius = <75>;
> maxim,battery-overcurrent-microamp = <3000000>;
> maxim,charge-input-threshold-microvolt = <4300000>;
> +
> + led {
> + compatible = "maxim,max77693-led";
> + maxim,trigger-type = <LEDS_TRIG_TYPE_LEVEL>;
> + maxim,boost-mode = <LEDS_BOOST_FIXED>;
> + maxim,boost-mvout = <5000>;
> + maxim,mvsys-min = <2400>;
> +
> + camera_flash: flash-led {
> + label = "max77693-flash";
> + led-sources = <0>, <1>;
> + max-microamp = <500000>;
> + flash-max-microamp = <1250000>;
> + flash-timeout-us = <1000000>;
> + };
> };
> };
--
Kind regards,
e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693
2015-03-28 22:55 ` Sakari Ailus
@ 2015-03-30 7:36 ` Jacek Anaszewski
[not found] ` <5518FD05.5060800-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
0 siblings, 1 reply; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-30 7:36 UTC (permalink / raw)
To: Sakari Ailus
Cc: linux-leds, linux-media, devicetree, kyungmin.park, pavel,
cooloney, rpurdie, s.nawrocki, Andrzej Hajda, Lee Jones,
Chanwoo Choi
Hi Sakari,
On 03/28/2015 11:55 PM, Sakari Ailus wrote:
> On Fri, Mar 27, 2015 at 02:49:38PM +0100, Jacek Anaszewski wrote:
>> This patch adds device tree binding documentation for
>> the flash cell of the Maxim max77693 multifunctional device.
>>
>> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Cc: Chanwoo Choi <cw00.choi@samsung.com>
>> Cc: Bryan Wu <cooloney@gmail.com>
>> Cc: Richard Purdie <rpurdie@rpsys.net>
>> ---
>> Documentation/devicetree/bindings/mfd/max77693.txt | 61 ++++++++++++++++++++
>> 1 file changed, 61 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
>> index 38e6440..15c546ea 100644
>> --- a/Documentation/devicetree/bindings/mfd/max77693.txt
>> +++ b/Documentation/devicetree/bindings/mfd/max77693.txt
>> @@ -76,7 +76,53 @@ Optional properties:
>> Valid values: 4300000, 4700000, 4800000, 4900000
>> Default: 4300000
>>
>> +- led : the LED submodule device node
>> +
>> +There are two LED outputs available - FLED1 and FLED2. Each of them can
>> +control a separate LED or they can be connected together to double
>> +the maximum current for a single connected LED. One LED is represented
>> +by one child node.
>> +
>> +Required properties:
>> +- compatible : Must be "maxim,max77693-led".
>> +
>> +Optional properties:
>> +- maxim,trigger-type : Flash trigger type.
>> + Possible trigger types:
>> + LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal triggers
>> + the flash,
>> + LEDS_TRIG_TYPE_LEVEL (1) - Strobe pulse length controls duration
>> + of the flash.
>> +- maxim,boost-mode :
>> + In boost mode the device can produce up to 1.2A of total current
>> + on both outputs. The maximum current on each output is reduced
>> + to 625mA then. If not enabled explicitly, boost setting defaults to
>> + LEDS_BOOST_FIXED in case both current sources are used.
>> + Possible values:
>> + LEDS_BOOST_OFF (0) - no boost,
>> + LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
>> + LEDS_BOOST_FIXED (2) - fixed mode.
>> +- maxim,boost-mvout : Output voltage of the boost module in millivolts.
>
> What are the possible values for this?
maxim,boost-mvout : Output voltage of the boost module in millivolts
Range: 3300 - 5500
Do you think it is necessary to mention also allowed step for all the
values?
> Is the datasheet publicly available btw.?
I have an access only to the non-public one.
>> +- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
>> + if chip estimates that system voltage could drop below this level due
>> + to flash power consumption.
>> +
>> +Required properties of the LED child node:
>> +- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
>> + device current output identifiers: 0 - FLED1, 1 - FLED2
>> +
>> +Optional properties of the LED child node:
>> +- label : see Documentation/devicetree/bindings/leds/common.txt
>> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
>> + Range: 15625 - 250000
>> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
>> + Range: 15625 - 1000000
>> +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
>> + Range: 62500 - 1000000
>> +
>> Example:
>> +#include <dt-bindings/leds/common.h>
>> +
>> max77693@66 {
>> compatible = "maxim,max77693";
>> reg = <0x66>;
>> @@ -117,5 +163,20 @@ Example:
>> maxim,thermal-regulation-celsius = <75>;
>> maxim,battery-overcurrent-microamp = <3000000>;
>> maxim,charge-input-threshold-microvolt = <4300000>;
>> +
>> + led {
>> + compatible = "maxim,max77693-led";
>> + maxim,trigger-type = <LEDS_TRIG_TYPE_LEVEL>;
>> + maxim,boost-mode = <LEDS_BOOST_FIXED>;
>> + maxim,boost-mvout = <5000>;
>> + maxim,mvsys-min = <2400>;
>> +
>> + camera_flash: flash-led {
>> + label = "max77693-flash";
>> + led-sources = <0>, <1>;
>> + max-microamp = <500000>;
>> + flash-max-microamp = <1250000>;
>> + flash-timeout-us = <1000000>;
>> + };
>> };
>> };
>
--
Best Regards,
Jacek Anaszewski
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 05/11] leds: Add driver for AAT1290 flash LED controller
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
` (3 preceding siblings ...)
2015-03-27 13:49 ` [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693 Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-28 22:57 ` Sakari Ailus
2015-03-27 13:49 ` [PATCH v2 06/11] of: Add Skyworks Solutions, Inc. vendor prefix Jacek Anaszewski
` (3 subsequent siblings)
8 siblings, 1 reply; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
This patch adds a driver for the 1.5A Step-Up Current Regulator
for Flash LEDs. The device is programmed through a Skyworks proprietary
AS2Cwire serial digital interface.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-aat1290.c | 372 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 381 insertions(+)
create mode 100644 drivers/leds/leds-aat1290.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index f9fbeb5..c3b5b027 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -42,6 +42,14 @@ config LEDS_88PM860X
This option enables support for on-chip LED drivers found on Marvell
Semiconductor 88PM8606 PMIC.
+config LEDS_AAT1290
+ tristate "LED support for the AAT1290"
+ depends on LEDS_CLASS_FLASH
+ depends on GPIOLIB
+ depends on OF
+ help
+ This option enables support for the LEDs on the AAT1290.
+
config LEDS_LM3530
tristate "LCD Backlight driver for LM3530"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 9413fdb..0b3fd0e 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
+obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
diff --git a/drivers/leds/leds-aat1290.c b/drivers/leds/leds-aat1290.c
new file mode 100644
index 0000000..acfae35
--- /dev/null
+++ b/drivers/leds/leds-aat1290.c
@@ -0,0 +1,372 @@
+/*
+ * LED Flash class driver for the AAT1290
+ * 1.5A Step-Up Current Regulator for Flash LEDs
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/led-class-flash.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define AAT1290_MOVIE_MODE_CURRENT_ADDR 17
+#define AAT1290_MAX_MM_CURR_PERCENT_0 16
+#define AAT1290_MAX_MM_CURR_PERCENT_100 1
+
+#define AAT1290_FLASH_SAFETY_TIMER_ADDR 18
+
+#define AAT1290_MOVIE_MODE_CONFIG_ADDR 19
+#define AAT1290_MOVIE_MODE_OFF 1
+#define AAT1290_MOVIE_MODE_ON 3
+
+#define AAT1290_MM_CURRENT_RATIO_ADDR 20
+#define AAT1290_MM_TO_FL_1_92 1
+
+#define AAT1290_MM_TO_FL_RATIO 1000 / 1920
+#define AAT1290_MAX_MM_CURRENT(fl_max) (fl_max * AAT1290_MM_TO_FL_RATIO)
+
+#define AAT1290_LATCH_TIME_MIN_US 500
+#define AAT1290_LATCH_TIME_MAX_US 1000
+#define AAT1290_EN_SET_TICK_TIME_US 1
+#define AAT1290_FLEN_OFF_DELAY_TIME_US 10
+#define AAT1290_FLASH_TM_NUM_LEVELS 16
+#define AAT1290_MM_CURRENT_SCALE_SIZE 15
+
+
+struct aat1290_led {
+ /* platform device data */
+ struct platform_device *pdev;
+ /* secures access to the device */
+ struct mutex lock;
+
+ /* corresponding LED Flash class device */
+ struct led_classdev_flash fled_cdev;
+
+ /* FLEN pin */
+ struct gpio_desc *gpio_fl_en;
+ /* EN|SET pin */
+ struct gpio_desc *gpio_en_set;
+
+ /* maximum flash timeout */
+ u32 max_flash_tm;
+ /* maximum LED current in flash mode */
+ u32 max_flash_current;
+ /* device mode */
+ bool movie_mode;
+
+ /* brightness cache */
+ unsigned int torch_brightness;
+ /* assures led-triggers compatibility */
+ struct work_struct work_brightness_set;
+};
+
+static struct aat1290_led *fled_cdev_to_led(
+ struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct aat1290_led, fled_cdev);
+}
+
+static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value)
+{
+ int i;
+
+ gpiod_direction_output(led->gpio_fl_en, 0);
+ gpiod_direction_output(led->gpio_en_set, 0);
+
+ udelay(AAT1290_FLEN_OFF_DELAY_TIME_US);
+
+ /* write address */
+ for (i = 0; i < addr; ++i) {
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpiod_direction_output(led->gpio_en_set, 0);
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpiod_direction_output(led->gpio_en_set, 1);
+ }
+
+ usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+
+ /* write data */
+ for (i = 0; i < value; ++i) {
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpiod_direction_output(led->gpio_en_set, 0);
+ udelay(AAT1290_EN_SET_TICK_TIME_US);
+ gpiod_direction_output(led->gpio_en_set, 1);
+ }
+
+ usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+}
+
+static void aat1290_set_flash_safety_timer(struct aat1290_led *led,
+ unsigned int micro_sec)
+{
+ struct led_classdev_flash *fled_cdev = &led->fled_cdev;
+ struct led_flash_setting *flash_tm = &fled_cdev->timeout;
+ int flash_tm_reg = AAT1290_FLASH_TM_NUM_LEVELS -
+ (micro_sec / flash_tm->step) + 1;
+
+ aat1290_as2cwire_write(led, AAT1290_FLASH_SAFETY_TIMER_ADDR,
+ flash_tm_reg);
+}
+
+static void aat1290_brightness_set(struct aat1290_led *led,
+ enum led_brightness brightness)
+{
+ mutex_lock(&led->lock);
+
+ if (brightness == 0) {
+ gpiod_direction_output(led->gpio_fl_en, 0);
+ gpiod_direction_output(led->gpio_en_set, 0);
+ led->movie_mode = false;
+ goto unlock;
+ }
+
+ if (!led->movie_mode) {
+ aat1290_as2cwire_write(led, AAT1290_MM_CURRENT_RATIO_ADDR,
+ AAT1290_MM_TO_FL_1_92);
+ led->movie_mode = true;
+ }
+
+ aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR,
+ AAT1290_MAX_MM_CURR_PERCENT_0 - brightness);
+ aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR,
+ AAT1290_MOVIE_MODE_ON);
+unlock:
+ mutex_unlock(&led->lock);
+}
+
+/* LED subsystem callbacks */
+
+static void aat1290_brightness_set_work(struct work_struct *work)
+{
+ struct aat1290_led *led =
+ container_of(work, struct aat1290_led, work_brightness_set);
+
+ aat1290_brightness_set(led, led->torch_brightness);
+}
+
+static void aat1290_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+ led->torch_brightness = brightness;
+ schedule_work(&led->work_brightness_set);
+}
+
+static int aat1290_led_brightness_set_sync(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+ aat1290_brightness_set(led, brightness);
+
+ return 0;
+}
+
+static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
+ bool state)
+
+{
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct led_flash_setting *timeout = &fled_cdev->timeout;
+
+ mutex_lock(&led->lock);
+
+ if (state == 0) {
+ gpiod_direction_output(led->gpio_fl_en, 0);
+ gpiod_direction_output(led->gpio_en_set, 0);
+ goto done;
+ }
+
+ aat1290_set_flash_safety_timer(led, timeout->val);
+
+ gpiod_direction_output(led->gpio_fl_en, 1);
+
+done:
+ /*
+ * To reenter movie mode after a flash event the part must be cycled
+ * off and back on to reset the movie mode and reprogrammed via the
+ * AS2Cwire. Therefore the brightness and movie_mode properties needs
+ * to be updated here to reflect the actual state.
+ */
+ led_cdev->brightness = 0;
+ led->movie_mode = false;
+
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ /*
+ * Don't do anything - flash timeout is cached in the led-class-flash
+ * core and will be applied in the strobe_set op, as writing the
+ * safety timer register spuriously turns the torch mode on.
+ */
+
+ return 0;
+}
+
+static int aat1290_led_parse_dt(struct aat1290_led *led)
+{
+ struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
+ struct device *dev = &led->pdev->dev;
+ struct device_node *child_node;
+ int ret = 0;
+
+ led->gpio_fl_en = devm_gpiod_get(dev, "flen");
+ if (IS_ERR(led->gpio_fl_en)) {
+ ret = PTR_ERR(led->gpio_fl_en);
+ dev_err(dev, "Unable to claim gpio \"flen\".\n");
+ return ret;
+ }
+
+ led->gpio_en_set = devm_gpiod_get(dev, "enset");
+ if (IS_ERR(led->gpio_en_set)) {
+ ret = PTR_ERR(led->gpio_en_set);
+ dev_err(dev, "Unable to claim gpio \"enset\".\n");
+ return ret;
+ }
+
+ child_node = of_get_next_available_child(dev->of_node, NULL);
+ if (!child_node) {
+ dev_err(dev, "No DT child node found for connected LED.\n");
+ return -EINVAL;
+ }
+
+ led_cdev->name = of_get_property(child_node, "label", NULL) ? :
+ child_node->name;
+
+ ret = of_property_read_u32(child_node, "flash-max-microamp",
+ &led->max_flash_current);
+ if (ret < 0) {
+ dev_err(dev,
+ "Error reading \"flash-max-microamp\" DT property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(child_node, "flash-timeout-us",
+ &led->max_flash_tm);
+ if (ret < 0) {
+ dev_err(dev,
+ "Error reading \"flash-timeout-us\" DT property\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static void aat1290_init_flash_timeout(struct aat1290_led *led)
+{
+ struct led_classdev_flash *fled_cdev = &led->fled_cdev;
+ struct led_flash_setting *setting;
+
+ /* Init flash timeout setting */
+ setting = &fled_cdev->timeout;
+ setting->min = led->max_flash_tm / AAT1290_FLASH_TM_NUM_LEVELS;
+ setting->max = setting->min * AAT1290_FLASH_TM_NUM_LEVELS;
+ setting->step = setting->min;
+ setting->val = setting->max;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .strobe_set = aat1290_led_flash_strobe_set,
+ .timeout_set = aat1290_led_flash_timeout_set,
+};
+
+static int aat1290_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct aat1290_led *led;
+ struct led_classdev *led_cdev;
+ struct led_classdev_flash *fled_cdev;
+ int ret;
+
+ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->pdev = pdev;
+ platform_set_drvdata(pdev, led);
+
+ fled_cdev = &led->fled_cdev;
+ fled_cdev->ops = &flash_ops;
+ led_cdev = &fled_cdev->led_cdev;
+
+ ret = aat1290_led_parse_dt(led);
+ if (ret < 0)
+ return ret;
+
+ mutex_init(&led->lock);
+
+ /* Initialize LED Flash class device */
+ led_cdev->brightness_set = aat1290_led_brightness_set;
+ led_cdev->brightness_set_sync = aat1290_led_brightness_set_sync;
+ led_cdev->max_brightness = AAT1290_MM_CURRENT_SCALE_SIZE;
+ led_cdev->flags |= LED_DEV_CAP_FLASH;
+ INIT_WORK(&led->work_brightness_set, aat1290_brightness_set_work);
+
+ aat1290_init_flash_timeout(led);
+
+ /* Register LED Flash class device */
+ ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
+ if (ret < 0)
+ goto err_flash_register;
+
+ return 0;
+
+err_flash_register:
+ mutex_destroy(&led->lock);
+
+ return ret;
+}
+
+static int aat1290_led_remove(struct platform_device *pdev)
+{
+ struct aat1290_led *led = platform_get_drvdata(pdev);
+
+ led_classdev_flash_unregister(&led->fled_cdev);
+ cancel_work_sync(&led->work_brightness_set);
+
+ mutex_destroy(&led->lock);
+
+ return 0;
+}
+
+static const struct of_device_id aat1290_led_dt_match[] = {
+ { .compatible = "skyworks,aat1290" },
+ {},
+};
+
+static struct platform_driver aat1290_led_driver = {
+ .probe = aat1290_led_probe,
+ .remove = aat1290_led_remove,
+ .driver = {
+ .name = "aat1290",
+ .owner = THIS_MODULE,
+ .of_match_table = aat1290_led_dt_match,
+ },
+};
+
+module_platform_driver(aat1290_led_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_DESCRIPTION("Skyworks Current Regulator for Flash LEDs");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v2 05/11] leds: Add driver for AAT1290 flash LED controller
2015-03-27 13:49 ` [PATCH v2 05/11] leds: Add driver for AAT1290 flash LED controller Jacek Anaszewski
@ 2015-03-28 22:57 ` Sakari Ailus
0 siblings, 0 replies; 27+ messages in thread
From: Sakari Ailus @ 2015-03-28 22:57 UTC (permalink / raw)
To: Jacek Anaszewski
Cc: linux-leds, linux-media, devicetree, kyungmin.park, pavel,
cooloney, rpurdie, s.nawrocki
On Fri, Mar 27, 2015 at 02:49:39PM +0100, Jacek Anaszewski wrote:
> This patch adds a driver for the 1.5A Step-Up Current Regulator
> for Flash LEDs. The device is programmed through a Skyworks proprietary
> AS2Cwire serial digital interface.
>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Bryan Wu <cooloney@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
--
Sakari Ailus
e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 06/11] of: Add Skyworks Solutions, Inc. vendor prefix
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
` (4 preceding siblings ...)
2015-03-27 13:49 ` [PATCH v2 05/11] leds: Add driver for AAT1290 flash LED controller Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
[not found] ` <1427464185-27950-1-git-send-email-j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
` (2 subsequent siblings)
8 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
Use "skyworks" as the vendor prefix for the Skyworks Solutions, Inc.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
.../devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 42b3dab..4cd18bb 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -163,6 +163,7 @@ ricoh Ricoh Co. Ltd.
rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
sandisk Sandisk Corporation
+skyworks Skyworks Solutions, Inc.
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread[parent not found: <1427464185-27950-1-git-send-email-j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>]
* [PATCH v2 07/11] DT: Add documentation for the Skyworks AAT1290
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-27 13:49 ` [PATCH v2 02/11] leds: add uapi header file Jacek Anaszewski
` (7 subsequent siblings)
8 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds-u79uwXL29TY76Z2rM5mHXA, linux-media-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ, pavel-+ZI9xUNit7I,
cooloney-Re5JQEeQqe8AvxtiuMwx3w, rpurdie-Fm38FmjxZ/leoWH0uzbU5w,
sakari.ailus-X3B1VOXEql0, s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
Jacek Anaszewski
This patch adds device tree binding documentation for
1.5A Step-Up Current Regulator for Flash LEDs.
Signed-off-by: Jacek Anaszewski <j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Bryan Wu <cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Richard Purdie <rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org>
---
.../devicetree/bindings/leds/leds-aat1290.txt | 70 ++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
new file mode 100644
index 0000000..c3df4e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
@@ -0,0 +1,70 @@
+* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+The device is controlled through two pins: FL_EN and EN_SET. The pins when,
+asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+respectively. In order to add a capability of selecting the strobe signal source
+(e.g. GPIO or ISP) there is an additional switch required, independent of the
+flash chip. The switch is controlled with pin control.
+
+Required properties:
+
+- compatible : Must be "skyworks,aat1290".
+- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
+- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
+
+Optional properties:
+- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
+ "default" and "host" must refer to the same pin configuration
+ node, which sets the host as a strobe signal provider. Entry
+ "isp" must refer to the pin configuration node, which sets the
+ ISP as a strobe signal provider.
+
+A discrete LED element connected to the device must be represented by a child
+node - see Documentation/devicetree/bindings/leds/common.txt.
+
+Required properties of the LED child node:
+- flash-max-microamp : Maximum intensity in microamperes of the flash LED -
+ it can be calculated using following formula:
+ I = 1A * 162kohm / Rset.
+- flash-timeout-us : Maximum flash timeout in microseconds -
+ it can be calculated using following formula:
+ T = 8.82 * 10^9 * Ct.
+
+Optional properties of the LED child node:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
+a switch that allows for routing strobe signal either from host or from ISP):
+
+#include "exynos4412.dtsi"
+
+aat1290 {
+ compatible = "skyworks,aat1290";
+ flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "host", "isp";
+ pinctrl-0 = <&camera_flash_host>;
+ pinctrl-1 = <&camera_flash_host>;
+ pinctrl-2 = <&camera_flash_isp>;
+
+ camera_flash: flash-led {
+ label = "aat1290-flash";
+ flash-max-microamp = <1012500>;
+ flash-timeout-us = <1940000>;
+ };
+};
+
+&pinctrl_0 {
+ camera_flash_host: camera-flash-host {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <0>;
+ };
+
+ camera_flash_isp: camera-flash-isp {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <1>;
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 07/11] DT: Add documentation for the Skyworks AAT1290
@ 2015-03-27 13:49 ` Jacek Anaszewski
0 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
This patch adds device tree binding documentation for
1.5A Step-Up Current Regulator for Flash LEDs.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
.../devicetree/bindings/leds/leds-aat1290.txt | 70 ++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
new file mode 100644
index 0000000..c3df4e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
@@ -0,0 +1,70 @@
+* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+The device is controlled through two pins: FL_EN and EN_SET. The pins when,
+asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+respectively. In order to add a capability of selecting the strobe signal source
+(e.g. GPIO or ISP) there is an additional switch required, independent of the
+flash chip. The switch is controlled with pin control.
+
+Required properties:
+
+- compatible : Must be "skyworks,aat1290".
+- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
+- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
+
+Optional properties:
+- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
+ "default" and "host" must refer to the same pin configuration
+ node, which sets the host as a strobe signal provider. Entry
+ "isp" must refer to the pin configuration node, which sets the
+ ISP as a strobe signal provider.
+
+A discrete LED element connected to the device must be represented by a child
+node - see Documentation/devicetree/bindings/leds/common.txt.
+
+Required properties of the LED child node:
+- flash-max-microamp : Maximum intensity in microamperes of the flash LED -
+ it can be calculated using following formula:
+ I = 1A * 162kohm / Rset.
+- flash-timeout-us : Maximum flash timeout in microseconds -
+ it can be calculated using following formula:
+ T = 8.82 * 10^9 * Ct.
+
+Optional properties of the LED child node:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
+a switch that allows for routing strobe signal either from host or from ISP):
+
+#include "exynos4412.dtsi"
+
+aat1290 {
+ compatible = "skyworks,aat1290";
+ flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "host", "isp";
+ pinctrl-0 = <&camera_flash_host>;
+ pinctrl-1 = <&camera_flash_host>;
+ pinctrl-2 = <&camera_flash_isp>;
+
+ camera_flash: flash-led {
+ label = "aat1290-flash";
+ flash-max-microamp = <1012500>;
+ flash-timeout-us = <1940000>;
+ };
+};
+
+&pinctrl_0 {
+ camera_flash_host: camera-flash-host {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <0>;
+ };
+
+ camera_flash_isp: camera-flash-isp {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <1>;
+ };
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 08/11] media: Add registration helpers for V4L2 flash sub-devices
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-27 13:49 ` [PATCH v2 02/11] leds: add uapi header file Jacek Anaszewski
` (7 subsequent siblings)
8 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds-u79uwXL29TY76Z2rM5mHXA, linux-media-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ, pavel-+ZI9xUNit7I,
cooloney-Re5JQEeQqe8AvxtiuMwx3w, rpurdie-Fm38FmjxZ/leoWH0uzbU5w,
sakari.ailus-X3B1VOXEql0, s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
Jacek Anaszewski, Hans Verkuil
This patch adds helper functions for registering/unregistering
LED Flash class devices as V4L2 sub-devices. The functions should
be called from the LED subsystem device driver. In case the
support for V4L2 Flash sub-devices is disabled in the kernel
config the functions' empty versions will be used.
Signed-off-by: Jacek Anaszewski <j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Sakari Ailus <sakari.ailus-X3B1VOXEql0@public.gmane.org>
Cc: Hans Verkuil <hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
---
drivers/media/v4l2-core/Kconfig | 11 +
drivers/media/v4l2-core/Makefile | 2 +
drivers/media/v4l2-core/v4l2-flash.c | 619 ++++++++++++++++++++++++++++++++++
include/media/v4l2-flash.h | 144 ++++++++
4 files changed, 776 insertions(+)
create mode 100644 drivers/media/v4l2-core/v4l2-flash.c
create mode 100644 include/media/v4l2-flash.h
diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
index ba7e21a..f034f1a 100644
--- a/drivers/media/v4l2-core/Kconfig
+++ b/drivers/media/v4l2-core/Kconfig
@@ -44,6 +44,17 @@ config V4L2_MEM2MEM_DEV
tristate
depends on VIDEOBUF2_CORE
+# Used by LED subsystem flash drivers
+config V4L2_FLASH_LED_CLASS
+ tristate "Enable support for Flash sub-devices"
+ depends on VIDEO_V4L2_SUBDEV_API
+ depends on LEDS_CLASS_FLASH
+ ---help---
+ Say Y here to enable support for Flash sub-devices, which allow
+ to control LED class devices with use of V4L2 Flash controls.
+
+ When in doubt, say N.
+
# Used by drivers that need Videobuf modules
config VIDEOBUF_GEN
tristate
diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile
index 63d29f2..44e858c 100644
--- a/drivers/media/v4l2-core/Makefile
+++ b/drivers/media/v4l2-core/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_VIDEO_TUNER) += tuner.o
obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o
+obj-$(CONFIG_V4L2_FLASH_LED_CLASS) += v4l2-flash.o
+
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
diff --git a/drivers/media/v4l2-core/v4l2-flash.c b/drivers/media/v4l2-core/v4l2-flash.c
new file mode 100644
index 0000000..bed2036
--- /dev/null
+++ b/drivers/media/v4l2-core/v4l2-flash.c
@@ -0,0 +1,619 @@
+/*
+ * V4L2 Flash LED sub-device registration helpers.
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd
+ * Author: Jacek Anaszewski <j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <media/v4l2-flash.h>
+
+#define has_flash_op(v4l2_flash, op) \
+ (v4l2_flash && v4l2_flash->ops->op)
+
+#define call_flash_op(v4l2_flash, op, arg) \
+ (has_flash_op(v4l2_flash, op) ? \
+ v4l2_flash->ops->op(v4l2_flash, arg) : \
+ -EINVAL)
+
+static enum led_brightness __intensity_to_led_brightness(
+ struct v4l2_ctrl *ctrl,
+ s32 intensity)
+{
+ s64 intensity64 = intensity - ctrl->minimum;
+
+ do_div(intensity64, ctrl->step);
+
+ /*
+ * Indicator LEDs, unlike torch LEDs, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Therefore it must be possible to set it to 0 level which in
+ * the LED subsystem reflects LED_OFF state.
+ */
+ if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY)
+ ++intensity64;
+
+ return intensity64;
+}
+
+static s32 __led_brightness_to_intensity(struct v4l2_ctrl *ctrl,
+ enum led_brightness brightness)
+{
+ /*
+ * Indicator LEDs, unlike torch LEDs, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Do not decrement brightness read from the LED subsystem for
+ * indicator LED as it may equal 0. For torch LEDs this function
+ * is called only when V4L2_FLASH_LED_MODE_TORCH is set and the
+ * brightness read is guaranteed to be greater than 0. In the mode
+ * V4L2_FLASH_LED_MODE_NONE the cached torch intensity value is used.
+ */
+ if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY)
+ --brightness;
+
+ return (brightness * ctrl->step) + ctrl->minimum;
+}
+
+static void v4l2_flash_set_led_brightness(struct v4l2_flash *v4l2_flash,
+ struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ enum led_brightness brightness;
+
+ if (has_flash_op(v4l2_flash, intensity_to_led_brightness))
+ brightness = call_flash_op(v4l2_flash,
+ intensity_to_led_brightness,
+ ctrl->val);
+ else
+ brightness = __intensity_to_led_brightness(ctrl, ctrl->val);
+ /*
+ * In case a LED Flash class driver provides ops for custom
+ * brightness <-> intensity conversion, it also must have defined
+ * related v4l2 control step == 1. In such a case a backward conversion
+ * from led brightness to v4l2 intensity is required to find out the
+ * the aligned intensity value.
+ */
+ if (has_flash_op(v4l2_flash, led_brightness_to_intensity))
+ ctrl->val = call_flash_op(v4l2_flash,
+ led_brightness_to_intensity,
+ brightness);
+
+ if (ctrl == ctrls[TORCH_INTENSITY] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ return;
+
+ led_set_brightness(&v4l2_flash->fled_cdev->led_cdev, brightness);
+}
+
+static int v4l2_flash_update_led_brightness(struct v4l2_flash *v4l2_flash,
+ struct v4l2_ctrl *ctrl)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ int ret;
+
+ /*
+ * Update torch brightness only if in TORCH_MODE. In other modes torch
+ * led is turned off, which would spuriously inform the user space that
+ * V4L2_CID_FLASH_TORCH_INTENSITY control value has changed to 0.
+ */
+ if (ctrl == ctrls[TORCH_INTENSITY] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ return 0;
+
+ ret = led_update_brightness(led_cdev);
+ if (ret < 0)
+ return ret;
+
+ if (has_flash_op(v4l2_flash, led_brightness_to_intensity))
+ ctrl->val = call_flash_op(v4l2_flash,
+ led_brightness_to_intensity,
+ led_cdev->brightness);
+ else
+ ctrl->val = __led_brightness_to_intensity(ctrl,
+ led_cdev->brightness);
+
+ return 0;
+}
+
+static int v4l2_flash_g_volatile_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ bool is_strobing;
+ int ret;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ return v4l2_flash_update_led_brightness(v4l2_flash, c);
+ case V4L2_CID_FLASH_INTENSITY:
+ ret = led_update_flash_brightness(fled_cdev);
+ if (ret < 0)
+ return ret;
+ /* no conversion is needed */
+ c->val = fled_cdev->brightness.val;
+ return 0;
+ case V4L2_CID_FLASH_STROBE_STATUS:
+ ret = led_get_flash_strobe(fled_cdev, &is_strobing);
+ if (ret < 0)
+ return ret;
+ c->val = is_strobing;
+ return 0;
+ case V4L2_CID_FLASH_FAULT:
+ /* LED faults map directly to V4L2 flash faults */
+ return led_get_flash_fault(fled_cdev, &c->val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static bool __software_strobe_mode_inactive(struct v4l2_ctrl **ctrls)
+{
+ return ((ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH) ||
+ (ctrls[STROBE_SOURCE] && (ctrls[STROBE_SOURCE]->val !=
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE)));
+}
+
+static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ bool external_strobe;
+ int ret = 0;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_LED_MODE:
+ switch (c->val) {
+ case V4L2_FLASH_LED_MODE_NONE:
+ led_set_brightness(led_cdev, LED_OFF);
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_FLASH_LED_MODE_FLASH:
+ /* Turn the torch LED off */
+ led_set_brightness(led_cdev, LED_OFF);
+ if (ctrls[STROBE_SOURCE]) {
+ external_strobe = (ctrls[STROBE_SOURCE]->val ==
+ V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+
+ ret = call_flash_op(v4l2_flash,
+ external_strobe_set,
+ external_strobe);
+ }
+ return ret;
+ case V4L2_FLASH_LED_MODE_TORCH:
+ if (ctrls[STROBE_SOURCE]) {
+ ret = call_flash_op(v4l2_flash,
+ external_strobe_set,
+ false);
+ if (ret < 0)
+ return ret;
+ }
+ /* Stop flash strobing */
+ ret = led_set_flash_strobe(fled_cdev, false);
+ if (ret < 0)
+ return ret;
+
+ v4l2_flash_set_led_brightness(v4l2_flash,
+ ctrls[TORCH_INTENSITY]);
+ return 0;
+ }
+ break;
+ case V4L2_CID_FLASH_STROBE_SOURCE:
+ external_strobe = (c->val == V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+ /*
+ * For some hardware arrangements setting strobe source may
+ * affect torch mode. Therefore, if not in the flash mode,
+ * cache only this setting. It will be applied upon switching
+ * to flash mode.
+ */
+ if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH)
+ return 0;
+
+ return call_flash_op(v4l2_flash, external_strobe_set,
+ external_strobe);
+ case V4L2_CID_FLASH_STROBE:
+ if (__software_strobe_mode_inactive(ctrls))
+ return -EBUSY;
+ return led_set_flash_strobe(fled_cdev, true);
+ case V4L2_CID_FLASH_STROBE_STOP:
+ if (__software_strobe_mode_inactive(ctrls))
+ return -EBUSY;
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_CID_FLASH_TIMEOUT:
+ /* no conversion is needed */
+ return led_set_flash_timeout(fled_cdev, c->val);
+ case V4L2_CID_FLASH_INTENSITY:
+ /* no conversion is needed */
+ return led_set_flash_brightness(fled_cdev, c->val);
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ v4l2_flash_set_led_brightness(v4l2_flash, c);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops v4l2_flash_ctrl_ops = {
+ .g_volatile_ctrl = v4l2_flash_g_volatile_ctrl,
+ .s_ctrl = v4l2_flash_s_ctrl,
+};
+
+void __lfs_to_v4l2_ctrl_config(struct led_flash_setting *s,
+ struct v4l2_ctrl_config *c)
+{
+ c->min = s->min;
+ c->max = s->max;
+ c->step = s->step;
+ c->def = s->val;
+}
+
+static void __fill_ctrl_init_data(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_config *flash_cfg,
+ struct v4l2_flash_ctrl_data *ctrl_init_data)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ const struct led_flash_ops *fled_cdev_ops = fled_cdev->ops;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ u32 mask;
+
+ /* Init FLASH_FAULT ctrl data */
+ if (flash_cfg->flash_faults) {
+ ctrl_init_data[FLASH_FAULT].cid = V4L2_CID_FLASH_FAULT;
+ ctrl_cfg = &ctrl_init_data[FLASH_FAULT].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_FAULT;
+ ctrl_cfg->max = flash_cfg->flash_faults;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init INDICATOR_INTENSITY ctrl data */
+ if (flash_cfg->indicator_led) {
+ ctrl_init_data[INDICATOR_INTENSITY].cid =
+ V4L2_CID_FLASH_INDICATOR_INTENSITY;
+ ctrl_cfg = &ctrl_init_data[INDICATOR_INTENSITY].config;
+ __lfs_to_v4l2_ctrl_config(&flash_cfg->intensity, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_INDICATOR_INTENSITY;
+ ctrl_cfg->min = 0;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ /* Indicator LED can have only faults and intensity controls. */
+ return;
+ }
+
+ /* Init FLASH_LED_MODE ctrl data */
+ mask = 1 << V4L2_FLASH_LED_MODE_NONE |
+ 1 << V4L2_FLASH_LED_MODE_TORCH;
+ if (led_cdev->flags & LED_DEV_CAP_FLASH)
+ mask |= 1 << V4L2_FLASH_LED_MODE_FLASH;
+
+ ctrl_init_data[LED_MODE].cid = V4L2_CID_FLASH_LED_MODE;
+ ctrl_cfg = &ctrl_init_data[LED_MODE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_LED_MODE;
+ ctrl_cfg->max = V4L2_FLASH_LED_MODE_TORCH;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_LED_MODE_NONE;
+ ctrl_cfg->flags = 0;
+
+ /* Init TORCH_INTENSITY ctrl data */
+ ctrl_init_data[TORCH_INTENSITY].cid = V4L2_CID_FLASH_TORCH_INTENSITY;
+ ctrl_cfg = &ctrl_init_data[TORCH_INTENSITY].config;
+ __lfs_to_v4l2_ctrl_config(&flash_cfg->intensity, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_TORCH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ if (!(led_cdev->flags & LED_DEV_CAP_FLASH))
+ return;
+
+ /* Init FLASH_STROBE ctrl data */
+ ctrl_init_data[FLASH_STROBE].cid = V4L2_CID_FLASH_STROBE;
+ ctrl_cfg = &ctrl_init_data[FLASH_STROBE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE;
+
+ /* Init STROBE_STOP ctrl data */
+ ctrl_init_data[STROBE_STOP].cid = V4L2_CID_FLASH_STROBE_STOP;
+ ctrl_cfg = &ctrl_init_data[STROBE_STOP].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STOP;
+
+ /* Init FLASH_STROBE_SOURCE ctrl data */
+ if (flash_cfg->has_external_strobe) {
+ mask = (1 << V4L2_FLASH_STROBE_SOURCE_SOFTWARE) |
+ (1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+ ctrl_init_data[STROBE_SOURCE].cid =
+ V4L2_CID_FLASH_STROBE_SOURCE;
+ ctrl_cfg = &ctrl_init_data[STROBE_SOURCE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_SOURCE;
+ ctrl_cfg->max = V4L2_FLASH_STROBE_SOURCE_EXTERNAL;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
+ }
+
+ /* Init STROBE_STATUS ctrl data */
+ if (fled_cdev_ops->strobe_get) {
+ ctrl_init_data[STROBE_STATUS].cid =
+ V4L2_CID_FLASH_STROBE_STATUS;
+ ctrl_cfg = &ctrl_init_data[STROBE_STATUS].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STATUS;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init FLASH_TIMEOUT ctrl data */
+ if (fled_cdev_ops->timeout_set) {
+ ctrl_init_data[FLASH_TIMEOUT].cid = V4L2_CID_FLASH_TIMEOUT;
+ ctrl_cfg = &ctrl_init_data[FLASH_TIMEOUT].config;
+ __lfs_to_v4l2_ctrl_config(&fled_cdev->timeout, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_TIMEOUT;
+ }
+
+ /* Init FLASH_INTENSITY ctrl data */
+ if (fled_cdev_ops->flash_brightness_set) {
+ ctrl_init_data[FLASH_INTENSITY].cid = V4L2_CID_FLASH_INTENSITY;
+ ctrl_cfg = &ctrl_init_data[FLASH_INTENSITY].config;
+ __lfs_to_v4l2_ctrl_config(&fled_cdev->brightness, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+ }
+}
+
+static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_config *flash_cfg)
+
+{
+ struct v4l2_flash_ctrl_data *ctrl_init_data;
+ struct v4l2_ctrl *ctrl;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ int i, ret, num_ctrls = 0;
+
+ /* allocate memory dynamically so as not to exceed stack frame size */
+ ctrl_init_data = kcalloc(NUM_FLASH_CTRLS, sizeof(*ctrl_init_data),
+ GFP_KERNEL);
+ if (!ctrl_init_data)
+ return -ENOMEM;
+
+ __fill_ctrl_init_data(v4l2_flash, flash_cfg, ctrl_init_data);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i)
+ if (ctrl_init_data[i].cid)
+ ++num_ctrls;
+
+ v4l2_ctrl_handler_init(&v4l2_flash->hdl, num_ctrls);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i) {
+ ctrl_cfg = &ctrl_init_data[i].config;
+ if (!ctrl_init_data[i].cid)
+ continue;
+
+ if (ctrl_cfg->id == V4L2_CID_FLASH_LED_MODE ||
+ ctrl_cfg->id == V4L2_CID_FLASH_STROBE_SOURCE)
+ ctrl = v4l2_ctrl_new_std_menu(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->max,
+ ctrl_cfg->menu_skip_mask,
+ ctrl_cfg->def);
+ else
+ ctrl = v4l2_ctrl_new_std(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->min,
+ ctrl_cfg->max,
+ ctrl_cfg->step,
+ ctrl_cfg->def);
+
+ if (ctrl)
+ ctrl->flags |= ctrl_cfg->flags;
+
+ if (i <= STROBE_SOURCE)
+ v4l2_flash->ctrls[i] = ctrl;
+ }
+
+ kfree(ctrl_init_data);
+
+ if (v4l2_flash->hdl.error) {
+ ret = v4l2_flash->hdl.error;
+ goto error_free_handler;
+ }
+
+ v4l2_ctrl_handler_setup(&v4l2_flash->hdl);
+
+ v4l2_flash->sd.ctrl_handler = &v4l2_flash->hdl;
+
+ return 0;
+
+error_free_handler:
+ v4l2_ctrl_handler_free(&v4l2_flash->hdl);
+ return ret;
+}
+
+static int __sync_device_with_v4l2_controls(struct v4l2_flash *v4l2_flash)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ int ret = 0;
+
+ if (ctrls[INDICATOR_INTENSITY]) {
+ v4l2_flash_set_led_brightness(v4l2_flash,
+ ctrls[INDICATOR_INTENSITY]);
+ return 0;
+ }
+
+ v4l2_flash_set_led_brightness(v4l2_flash, ctrls[TORCH_INTENSITY]);
+
+ if (ctrls[FLASH_TIMEOUT]) {
+ ret = led_set_flash_timeout(fled_cdev,
+ ctrls[FLASH_TIMEOUT]->val);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (ctrls[FLASH_INTENSITY]) {
+ ret = led_set_flash_brightness(fled_cdev,
+ ctrls[FLASH_INTENSITY]->val);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * For some hardware arrangements setting strobe source may affect
+ * torch mode. Synchronize strobe source setting only if not in torch
+ * mode. For torch mode case it will get synchronized upon switching
+ * to flash mode.
+ */
+ if (ctrls[STROBE_SOURCE] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ ret = call_flash_op(v4l2_flash, external_strobe_set,
+ ctrls[STROBE_SOURCE]->val);
+
+ return ret;
+}
+
+/*
+ * V4L2 subdev internal operations
+ */
+
+static int v4l2_flash_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ int ret = 0;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (!v4l2_fh_is_singular(&fh->vfh))
+ goto unlock;
+
+ led_sysfs_disable(led_cdev);
+ led_trigger_remove(led_cdev);
+
+ ret = __sync_device_with_v4l2_controls(v4l2_flash);
+
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+
+static int v4l2_flash_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ int ret = 0;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (v4l2_fh_is_singular(&fh->vfh) &&
+ v4l2_flash->ctrls[STROBE_SOURCE])
+ ret = v4l2_ctrl_s_ctrl(v4l2_flash->ctrls[STROBE_SOURCE],
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
+
+ led_sysfs_enable(led_cdev);
+
+ mutex_unlock(&led_cdev->led_access);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_internal_ops v4l2_flash_subdev_internal_ops = {
+ .open = v4l2_flash_open,
+ .close = v4l2_flash_close,
+};
+
+static const struct v4l2_subdev_core_ops v4l2_flash_core_ops = {
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+};
+
+static const struct v4l2_subdev_ops v4l2_flash_subdev_ops = {
+ .core = &v4l2_flash_core_ops,
+};
+
+struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
+ const struct v4l2_flash_ops *ops,
+ struct v4l2_flash_config *config)
+{
+ struct v4l2_flash *v4l2_flash;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (!fled_cdev || !ops || !config)
+ return ERR_PTR(-EINVAL);
+
+ v4l2_flash = devm_kzalloc(led_cdev->dev, sizeof(*v4l2_flash),
+ GFP_KERNEL);
+ if (!v4l2_flash)
+ return ERR_PTR(-ENOMEM);
+
+ sd = &v4l2_flash->sd;
+ v4l2_flash->fled_cdev = fled_cdev;
+ v4l2_flash->ops = ops;
+ sd->dev = led_cdev->dev;
+ v4l2_subdev_init(sd, &v4l2_flash_subdev_ops);
+ sd->internal_ops = &v4l2_flash_subdev_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ strlcpy(sd->name, config->dev_name, sizeof(sd->name));
+
+ ret = media_entity_init(&sd->entity, 0, NULL, 0);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
+
+ ret = v4l2_flash_init_controls(v4l2_flash, config);
+ if (ret < 0)
+ goto err_init_controls;
+
+ of_node_get(led_cdev->dev->of_node);
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret < 0)
+ goto err_async_register_sd;
+
+ return v4l2_flash;
+
+err_async_register_sd:
+ of_node_put(led_cdev->dev->of_node);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+err_init_controls:
+ media_entity_cleanup(&sd->entity);
+
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(v4l2_flash_init);
+
+void v4l2_flash_release(struct v4l2_flash *v4l2_flash)
+{
+ struct v4l2_subdev *sd;
+ struct led_classdev *led_cdev;
+
+ if (IS_ERR(v4l2_flash))
+ return;
+
+ sd = &v4l2_flash->sd;
+ led_cdev = &v4l2_flash->fled_cdev->led_cdev;
+
+ v4l2_async_unregister_subdev(sd);
+ of_node_put(led_cdev->dev->of_node);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ media_entity_cleanup(&sd->entity);
+}
+EXPORT_SYMBOL_GPL(v4l2_flash_release);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
+MODULE_DESCRIPTION("V4L2 Flash sub-device helpers");
+MODULE_LICENSE("GPL v2");
diff --git a/include/media/v4l2-flash.h b/include/media/v4l2-flash.h
new file mode 100644
index 0000000..2d73418
--- /dev/null
+++ b/include/media/v4l2-flash.h
@@ -0,0 +1,144 @@
+/*
+ * V4L2 Flash LED sub-device registration helpers.
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd
+ * Author: Jacek Anaszewski <j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _V4L2_FLASH_H
+#define _V4L2_FLASH_H
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+struct led_classdev_flash;
+struct led_classdev;
+struct v4l2_flash;
+enum led_brightness;
+
+enum ctrl_init_data_id {
+ LED_MODE,
+ TORCH_INTENSITY,
+ FLASH_INTENSITY,
+ INDICATOR_INTENSITY,
+ FLASH_TIMEOUT,
+ STROBE_SOURCE,
+ /*
+ * Only above values are applicable to
+ * the 'ctrls' array in the struct v4l2_flash.
+ */
+ FLASH_STROBE,
+ STROBE_STOP,
+ STROBE_STATUS,
+ FLASH_FAULT,
+ NUM_FLASH_CTRLS,
+};
+
+/*
+ * struct v4l2_flash_ctrl_data - flash control initialization data, filled
+ * basing on the features declared by the LED Flash
+ * class driver in the v4l2_flash_ctrl_config
+ * @config: initialization data for a control
+ * @cid: contains v4l2 flash control id if the config
+ * field was initialized, 0 otherwise
+ */
+struct v4l2_flash_ctrl_data {
+ struct v4l2_ctrl_config config;
+ u32 cid;
+};
+
+struct v4l2_flash_ops {
+ /* setup strobing the flash by hardware pin state assertion */
+ int (*external_strobe_set)(struct v4l2_flash *v4l2_flash,
+ bool enable);
+ /* convert intensity to brightness in a device specific manner */
+ enum led_brightness (*intensity_to_led_brightness)
+ (struct v4l2_flash *v4l2_flash, s32 intensity);
+ /* convert brightness to intensity in a device specific manner */
+ s32 (*led_brightness_to_intensity)
+ (struct v4l2_flash *v4l2_flash, enum led_brightness);
+};
+
+/**
+ * struct v4l2_flash_config - V4L2 Flash sub-device initialization data
+ * @dev_name: the name of the media entity,
+ unique in the system
+ * @intensity: constraints for the LED in a non-flash mode
+ * @flash_faults: bitmask of flash faults that the LED Flash class
+ device can report; corresponding LED_FAULT* bit
+ definitions are available in <uapi/linux/leds.h>
+ * @has_external_strobe: external strobe capability
+ * @indicator_led: signifies that a led is of indicator type
+ */
+struct v4l2_flash_config {
+ char dev_name[32];
+ struct led_flash_setting intensity;
+ u32 flash_faults;
+ unsigned int has_external_strobe:1;
+ unsigned int indicator_led:1;
+};
+
+/**
+ * struct v4l2_flash - Flash sub-device context
+ * @fled_cdev: LED Flash class device controlled by this sub-device
+ * @ops: V4L2 specific flash ops
+ * @sd: V4L2 sub-device
+ * @hdl: flash controls handler
+ * @ctrls: array of pointers to controls, whose values define
+ * the sub-device state
+ */
+struct v4l2_flash {
+ struct led_classdev_flash *fled_cdev;
+ const struct v4l2_flash_ops *ops;
+
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_ctrl *ctrls[STROBE_SOURCE + 1];
+};
+
+static inline struct v4l2_flash *v4l2_subdev_to_v4l2_flash(
+ struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct v4l2_flash, sd);
+}
+
+static inline struct v4l2_flash *v4l2_ctrl_to_v4l2_flash(struct v4l2_ctrl *c)
+{
+ return container_of(c->handler, struct v4l2_flash, hdl);
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+/**
+ * v4l2_flash_init - initialize V4L2 flash led sub-device
+ * @fled_cdev: the LED Flash class device to wrap
+ * @flash_ops: V4L2 Flash device ops
+ * @config: initialization data for V4L2 Flash sub-device
+ *
+ * Create V4L2 Flash sub-device wrapping given LED subsystem device.
+ *
+ * Returns: A valid pointer, or, when an error occurs, the return
+ * value is encoded using ERR_PTR(). Use IS_ERR() to check and
+ * PTR_ERR() to obtain the numeric return value.
+ */
+struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
+ const struct v4l2_flash_ops *ops,
+ struct v4l2_flash_config *config);
+
+/**
+ * v4l2_flash_release - release V4L2 Flash sub-device
+ * @flash: the V4L2 Flash sub-device to release
+ *
+ * Release V4L2 Flash sub-device.
+ */
+void v4l2_flash_release(struct v4l2_flash *v4l2_flash);
+
+#else
+#define v4l2_flash_init(fled_cdev, ops, config) (NULL)
+#define v4l2_flash_release(v4l2_flash)
+#endif /* CONFIG_V4L2_FLASH_LED_CLASS */
+
+#endif /* _V4L2_FLASH_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 08/11] media: Add registration helpers for V4L2 flash sub-devices
@ 2015-03-27 13:49 ` Jacek Anaszewski
0 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski, Hans Verkuil
This patch adds helper functions for registering/unregistering
LED Flash class devices as V4L2 sub-devices. The functions should
be called from the LED subsystem device driver. In case the
support for V4L2 Flash sub-devices is disabled in the kernel
config the functions' empty versions will be used.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/v4l2-core/Kconfig | 11 +
drivers/media/v4l2-core/Makefile | 2 +
drivers/media/v4l2-core/v4l2-flash.c | 619 ++++++++++++++++++++++++++++++++++
include/media/v4l2-flash.h | 144 ++++++++
4 files changed, 776 insertions(+)
create mode 100644 drivers/media/v4l2-core/v4l2-flash.c
create mode 100644 include/media/v4l2-flash.h
diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
index ba7e21a..f034f1a 100644
--- a/drivers/media/v4l2-core/Kconfig
+++ b/drivers/media/v4l2-core/Kconfig
@@ -44,6 +44,17 @@ config V4L2_MEM2MEM_DEV
tristate
depends on VIDEOBUF2_CORE
+# Used by LED subsystem flash drivers
+config V4L2_FLASH_LED_CLASS
+ tristate "Enable support for Flash sub-devices"
+ depends on VIDEO_V4L2_SUBDEV_API
+ depends on LEDS_CLASS_FLASH
+ ---help---
+ Say Y here to enable support for Flash sub-devices, which allow
+ to control LED class devices with use of V4L2 Flash controls.
+
+ When in doubt, say N.
+
# Used by drivers that need Videobuf modules
config VIDEOBUF_GEN
tristate
diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile
index 63d29f2..44e858c 100644
--- a/drivers/media/v4l2-core/Makefile
+++ b/drivers/media/v4l2-core/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_VIDEO_TUNER) += tuner.o
obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o
+obj-$(CONFIG_V4L2_FLASH_LED_CLASS) += v4l2-flash.o
+
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
diff --git a/drivers/media/v4l2-core/v4l2-flash.c b/drivers/media/v4l2-core/v4l2-flash.c
new file mode 100644
index 0000000..bed2036
--- /dev/null
+++ b/drivers/media/v4l2-core/v4l2-flash.c
@@ -0,0 +1,619 @@
+/*
+ * V4L2 Flash LED sub-device registration helpers.
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <media/v4l2-flash.h>
+
+#define has_flash_op(v4l2_flash, op) \
+ (v4l2_flash && v4l2_flash->ops->op)
+
+#define call_flash_op(v4l2_flash, op, arg) \
+ (has_flash_op(v4l2_flash, op) ? \
+ v4l2_flash->ops->op(v4l2_flash, arg) : \
+ -EINVAL)
+
+static enum led_brightness __intensity_to_led_brightness(
+ struct v4l2_ctrl *ctrl,
+ s32 intensity)
+{
+ s64 intensity64 = intensity - ctrl->minimum;
+
+ do_div(intensity64, ctrl->step);
+
+ /*
+ * Indicator LEDs, unlike torch LEDs, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Therefore it must be possible to set it to 0 level which in
+ * the LED subsystem reflects LED_OFF state.
+ */
+ if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY)
+ ++intensity64;
+
+ return intensity64;
+}
+
+static s32 __led_brightness_to_intensity(struct v4l2_ctrl *ctrl,
+ enum led_brightness brightness)
+{
+ /*
+ * Indicator LEDs, unlike torch LEDs, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Do not decrement brightness read from the LED subsystem for
+ * indicator LED as it may equal 0. For torch LEDs this function
+ * is called only when V4L2_FLASH_LED_MODE_TORCH is set and the
+ * brightness read is guaranteed to be greater than 0. In the mode
+ * V4L2_FLASH_LED_MODE_NONE the cached torch intensity value is used.
+ */
+ if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY)
+ --brightness;
+
+ return (brightness * ctrl->step) + ctrl->minimum;
+}
+
+static void v4l2_flash_set_led_brightness(struct v4l2_flash *v4l2_flash,
+ struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ enum led_brightness brightness;
+
+ if (has_flash_op(v4l2_flash, intensity_to_led_brightness))
+ brightness = call_flash_op(v4l2_flash,
+ intensity_to_led_brightness,
+ ctrl->val);
+ else
+ brightness = __intensity_to_led_brightness(ctrl, ctrl->val);
+ /*
+ * In case a LED Flash class driver provides ops for custom
+ * brightness <-> intensity conversion, it also must have defined
+ * related v4l2 control step == 1. In such a case a backward conversion
+ * from led brightness to v4l2 intensity is required to find out the
+ * the aligned intensity value.
+ */
+ if (has_flash_op(v4l2_flash, led_brightness_to_intensity))
+ ctrl->val = call_flash_op(v4l2_flash,
+ led_brightness_to_intensity,
+ brightness);
+
+ if (ctrl == ctrls[TORCH_INTENSITY] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ return;
+
+ led_set_brightness(&v4l2_flash->fled_cdev->led_cdev, brightness);
+}
+
+static int v4l2_flash_update_led_brightness(struct v4l2_flash *v4l2_flash,
+ struct v4l2_ctrl *ctrl)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ int ret;
+
+ /*
+ * Update torch brightness only if in TORCH_MODE. In other modes torch
+ * led is turned off, which would spuriously inform the user space that
+ * V4L2_CID_FLASH_TORCH_INTENSITY control value has changed to 0.
+ */
+ if (ctrl == ctrls[TORCH_INTENSITY] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ return 0;
+
+ ret = led_update_brightness(led_cdev);
+ if (ret < 0)
+ return ret;
+
+ if (has_flash_op(v4l2_flash, led_brightness_to_intensity))
+ ctrl->val = call_flash_op(v4l2_flash,
+ led_brightness_to_intensity,
+ led_cdev->brightness);
+ else
+ ctrl->val = __led_brightness_to_intensity(ctrl,
+ led_cdev->brightness);
+
+ return 0;
+}
+
+static int v4l2_flash_g_volatile_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ bool is_strobing;
+ int ret;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ return v4l2_flash_update_led_brightness(v4l2_flash, c);
+ case V4L2_CID_FLASH_INTENSITY:
+ ret = led_update_flash_brightness(fled_cdev);
+ if (ret < 0)
+ return ret;
+ /* no conversion is needed */
+ c->val = fled_cdev->brightness.val;
+ return 0;
+ case V4L2_CID_FLASH_STROBE_STATUS:
+ ret = led_get_flash_strobe(fled_cdev, &is_strobing);
+ if (ret < 0)
+ return ret;
+ c->val = is_strobing;
+ return 0;
+ case V4L2_CID_FLASH_FAULT:
+ /* LED faults map directly to V4L2 flash faults */
+ return led_get_flash_fault(fled_cdev, &c->val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static bool __software_strobe_mode_inactive(struct v4l2_ctrl **ctrls)
+{
+ return ((ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH) ||
+ (ctrls[STROBE_SOURCE] && (ctrls[STROBE_SOURCE]->val !=
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE)));
+}
+
+static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ bool external_strobe;
+ int ret = 0;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_LED_MODE:
+ switch (c->val) {
+ case V4L2_FLASH_LED_MODE_NONE:
+ led_set_brightness(led_cdev, LED_OFF);
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_FLASH_LED_MODE_FLASH:
+ /* Turn the torch LED off */
+ led_set_brightness(led_cdev, LED_OFF);
+ if (ctrls[STROBE_SOURCE]) {
+ external_strobe = (ctrls[STROBE_SOURCE]->val ==
+ V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+
+ ret = call_flash_op(v4l2_flash,
+ external_strobe_set,
+ external_strobe);
+ }
+ return ret;
+ case V4L2_FLASH_LED_MODE_TORCH:
+ if (ctrls[STROBE_SOURCE]) {
+ ret = call_flash_op(v4l2_flash,
+ external_strobe_set,
+ false);
+ if (ret < 0)
+ return ret;
+ }
+ /* Stop flash strobing */
+ ret = led_set_flash_strobe(fled_cdev, false);
+ if (ret < 0)
+ return ret;
+
+ v4l2_flash_set_led_brightness(v4l2_flash,
+ ctrls[TORCH_INTENSITY]);
+ return 0;
+ }
+ break;
+ case V4L2_CID_FLASH_STROBE_SOURCE:
+ external_strobe = (c->val == V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+ /*
+ * For some hardware arrangements setting strobe source may
+ * affect torch mode. Therefore, if not in the flash mode,
+ * cache only this setting. It will be applied upon switching
+ * to flash mode.
+ */
+ if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH)
+ return 0;
+
+ return call_flash_op(v4l2_flash, external_strobe_set,
+ external_strobe);
+ case V4L2_CID_FLASH_STROBE:
+ if (__software_strobe_mode_inactive(ctrls))
+ return -EBUSY;
+ return led_set_flash_strobe(fled_cdev, true);
+ case V4L2_CID_FLASH_STROBE_STOP:
+ if (__software_strobe_mode_inactive(ctrls))
+ return -EBUSY;
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_CID_FLASH_TIMEOUT:
+ /* no conversion is needed */
+ return led_set_flash_timeout(fled_cdev, c->val);
+ case V4L2_CID_FLASH_INTENSITY:
+ /* no conversion is needed */
+ return led_set_flash_brightness(fled_cdev, c->val);
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ v4l2_flash_set_led_brightness(v4l2_flash, c);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops v4l2_flash_ctrl_ops = {
+ .g_volatile_ctrl = v4l2_flash_g_volatile_ctrl,
+ .s_ctrl = v4l2_flash_s_ctrl,
+};
+
+void __lfs_to_v4l2_ctrl_config(struct led_flash_setting *s,
+ struct v4l2_ctrl_config *c)
+{
+ c->min = s->min;
+ c->max = s->max;
+ c->step = s->step;
+ c->def = s->val;
+}
+
+static void __fill_ctrl_init_data(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_config *flash_cfg,
+ struct v4l2_flash_ctrl_data *ctrl_init_data)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ const struct led_flash_ops *fled_cdev_ops = fled_cdev->ops;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ u32 mask;
+
+ /* Init FLASH_FAULT ctrl data */
+ if (flash_cfg->flash_faults) {
+ ctrl_init_data[FLASH_FAULT].cid = V4L2_CID_FLASH_FAULT;
+ ctrl_cfg = &ctrl_init_data[FLASH_FAULT].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_FAULT;
+ ctrl_cfg->max = flash_cfg->flash_faults;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init INDICATOR_INTENSITY ctrl data */
+ if (flash_cfg->indicator_led) {
+ ctrl_init_data[INDICATOR_INTENSITY].cid =
+ V4L2_CID_FLASH_INDICATOR_INTENSITY;
+ ctrl_cfg = &ctrl_init_data[INDICATOR_INTENSITY].config;
+ __lfs_to_v4l2_ctrl_config(&flash_cfg->intensity, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_INDICATOR_INTENSITY;
+ ctrl_cfg->min = 0;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ /* Indicator LED can have only faults and intensity controls. */
+ return;
+ }
+
+ /* Init FLASH_LED_MODE ctrl data */
+ mask = 1 << V4L2_FLASH_LED_MODE_NONE |
+ 1 << V4L2_FLASH_LED_MODE_TORCH;
+ if (led_cdev->flags & LED_DEV_CAP_FLASH)
+ mask |= 1 << V4L2_FLASH_LED_MODE_FLASH;
+
+ ctrl_init_data[LED_MODE].cid = V4L2_CID_FLASH_LED_MODE;
+ ctrl_cfg = &ctrl_init_data[LED_MODE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_LED_MODE;
+ ctrl_cfg->max = V4L2_FLASH_LED_MODE_TORCH;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_LED_MODE_NONE;
+ ctrl_cfg->flags = 0;
+
+ /* Init TORCH_INTENSITY ctrl data */
+ ctrl_init_data[TORCH_INTENSITY].cid = V4L2_CID_FLASH_TORCH_INTENSITY;
+ ctrl_cfg = &ctrl_init_data[TORCH_INTENSITY].config;
+ __lfs_to_v4l2_ctrl_config(&flash_cfg->intensity, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_TORCH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ if (!(led_cdev->flags & LED_DEV_CAP_FLASH))
+ return;
+
+ /* Init FLASH_STROBE ctrl data */
+ ctrl_init_data[FLASH_STROBE].cid = V4L2_CID_FLASH_STROBE;
+ ctrl_cfg = &ctrl_init_data[FLASH_STROBE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE;
+
+ /* Init STROBE_STOP ctrl data */
+ ctrl_init_data[STROBE_STOP].cid = V4L2_CID_FLASH_STROBE_STOP;
+ ctrl_cfg = &ctrl_init_data[STROBE_STOP].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STOP;
+
+ /* Init FLASH_STROBE_SOURCE ctrl data */
+ if (flash_cfg->has_external_strobe) {
+ mask = (1 << V4L2_FLASH_STROBE_SOURCE_SOFTWARE) |
+ (1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+ ctrl_init_data[STROBE_SOURCE].cid =
+ V4L2_CID_FLASH_STROBE_SOURCE;
+ ctrl_cfg = &ctrl_init_data[STROBE_SOURCE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_SOURCE;
+ ctrl_cfg->max = V4L2_FLASH_STROBE_SOURCE_EXTERNAL;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
+ }
+
+ /* Init STROBE_STATUS ctrl data */
+ if (fled_cdev_ops->strobe_get) {
+ ctrl_init_data[STROBE_STATUS].cid =
+ V4L2_CID_FLASH_STROBE_STATUS;
+ ctrl_cfg = &ctrl_init_data[STROBE_STATUS].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STATUS;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init FLASH_TIMEOUT ctrl data */
+ if (fled_cdev_ops->timeout_set) {
+ ctrl_init_data[FLASH_TIMEOUT].cid = V4L2_CID_FLASH_TIMEOUT;
+ ctrl_cfg = &ctrl_init_data[FLASH_TIMEOUT].config;
+ __lfs_to_v4l2_ctrl_config(&fled_cdev->timeout, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_TIMEOUT;
+ }
+
+ /* Init FLASH_INTENSITY ctrl data */
+ if (fled_cdev_ops->flash_brightness_set) {
+ ctrl_init_data[FLASH_INTENSITY].cid = V4L2_CID_FLASH_INTENSITY;
+ ctrl_cfg = &ctrl_init_data[FLASH_INTENSITY].config;
+ __lfs_to_v4l2_ctrl_config(&fled_cdev->brightness, ctrl_cfg);
+ ctrl_cfg->id = V4L2_CID_FLASH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+ }
+}
+
+static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_config *flash_cfg)
+
+{
+ struct v4l2_flash_ctrl_data *ctrl_init_data;
+ struct v4l2_ctrl *ctrl;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ int i, ret, num_ctrls = 0;
+
+ /* allocate memory dynamically so as not to exceed stack frame size */
+ ctrl_init_data = kcalloc(NUM_FLASH_CTRLS, sizeof(*ctrl_init_data),
+ GFP_KERNEL);
+ if (!ctrl_init_data)
+ return -ENOMEM;
+
+ __fill_ctrl_init_data(v4l2_flash, flash_cfg, ctrl_init_data);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i)
+ if (ctrl_init_data[i].cid)
+ ++num_ctrls;
+
+ v4l2_ctrl_handler_init(&v4l2_flash->hdl, num_ctrls);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i) {
+ ctrl_cfg = &ctrl_init_data[i].config;
+ if (!ctrl_init_data[i].cid)
+ continue;
+
+ if (ctrl_cfg->id == V4L2_CID_FLASH_LED_MODE ||
+ ctrl_cfg->id == V4L2_CID_FLASH_STROBE_SOURCE)
+ ctrl = v4l2_ctrl_new_std_menu(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->max,
+ ctrl_cfg->menu_skip_mask,
+ ctrl_cfg->def);
+ else
+ ctrl = v4l2_ctrl_new_std(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->min,
+ ctrl_cfg->max,
+ ctrl_cfg->step,
+ ctrl_cfg->def);
+
+ if (ctrl)
+ ctrl->flags |= ctrl_cfg->flags;
+
+ if (i <= STROBE_SOURCE)
+ v4l2_flash->ctrls[i] = ctrl;
+ }
+
+ kfree(ctrl_init_data);
+
+ if (v4l2_flash->hdl.error) {
+ ret = v4l2_flash->hdl.error;
+ goto error_free_handler;
+ }
+
+ v4l2_ctrl_handler_setup(&v4l2_flash->hdl);
+
+ v4l2_flash->sd.ctrl_handler = &v4l2_flash->hdl;
+
+ return 0;
+
+error_free_handler:
+ v4l2_ctrl_handler_free(&v4l2_flash->hdl);
+ return ret;
+}
+
+static int __sync_device_with_v4l2_controls(struct v4l2_flash *v4l2_flash)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ int ret = 0;
+
+ if (ctrls[INDICATOR_INTENSITY]) {
+ v4l2_flash_set_led_brightness(v4l2_flash,
+ ctrls[INDICATOR_INTENSITY]);
+ return 0;
+ }
+
+ v4l2_flash_set_led_brightness(v4l2_flash, ctrls[TORCH_INTENSITY]);
+
+ if (ctrls[FLASH_TIMEOUT]) {
+ ret = led_set_flash_timeout(fled_cdev,
+ ctrls[FLASH_TIMEOUT]->val);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (ctrls[FLASH_INTENSITY]) {
+ ret = led_set_flash_brightness(fled_cdev,
+ ctrls[FLASH_INTENSITY]->val);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * For some hardware arrangements setting strobe source may affect
+ * torch mode. Synchronize strobe source setting only if not in torch
+ * mode. For torch mode case it will get synchronized upon switching
+ * to flash mode.
+ */
+ if (ctrls[STROBE_SOURCE] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ ret = call_flash_op(v4l2_flash, external_strobe_set,
+ ctrls[STROBE_SOURCE]->val);
+
+ return ret;
+}
+
+/*
+ * V4L2 subdev internal operations
+ */
+
+static int v4l2_flash_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ int ret = 0;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (!v4l2_fh_is_singular(&fh->vfh))
+ goto unlock;
+
+ led_sysfs_disable(led_cdev);
+ led_trigger_remove(led_cdev);
+
+ ret = __sync_device_with_v4l2_controls(v4l2_flash);
+
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
+}
+
+static int v4l2_flash_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ int ret = 0;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (v4l2_fh_is_singular(&fh->vfh) &&
+ v4l2_flash->ctrls[STROBE_SOURCE])
+ ret = v4l2_ctrl_s_ctrl(v4l2_flash->ctrls[STROBE_SOURCE],
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
+
+ led_sysfs_enable(led_cdev);
+
+ mutex_unlock(&led_cdev->led_access);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_internal_ops v4l2_flash_subdev_internal_ops = {
+ .open = v4l2_flash_open,
+ .close = v4l2_flash_close,
+};
+
+static const struct v4l2_subdev_core_ops v4l2_flash_core_ops = {
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+};
+
+static const struct v4l2_subdev_ops v4l2_flash_subdev_ops = {
+ .core = &v4l2_flash_core_ops,
+};
+
+struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
+ const struct v4l2_flash_ops *ops,
+ struct v4l2_flash_config *config)
+{
+ struct v4l2_flash *v4l2_flash;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (!fled_cdev || !ops || !config)
+ return ERR_PTR(-EINVAL);
+
+ v4l2_flash = devm_kzalloc(led_cdev->dev, sizeof(*v4l2_flash),
+ GFP_KERNEL);
+ if (!v4l2_flash)
+ return ERR_PTR(-ENOMEM);
+
+ sd = &v4l2_flash->sd;
+ v4l2_flash->fled_cdev = fled_cdev;
+ v4l2_flash->ops = ops;
+ sd->dev = led_cdev->dev;
+ v4l2_subdev_init(sd, &v4l2_flash_subdev_ops);
+ sd->internal_ops = &v4l2_flash_subdev_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ strlcpy(sd->name, config->dev_name, sizeof(sd->name));
+
+ ret = media_entity_init(&sd->entity, 0, NULL, 0);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
+
+ ret = v4l2_flash_init_controls(v4l2_flash, config);
+ if (ret < 0)
+ goto err_init_controls;
+
+ of_node_get(led_cdev->dev->of_node);
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret < 0)
+ goto err_async_register_sd;
+
+ return v4l2_flash;
+
+err_async_register_sd:
+ of_node_put(led_cdev->dev->of_node);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+err_init_controls:
+ media_entity_cleanup(&sd->entity);
+
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(v4l2_flash_init);
+
+void v4l2_flash_release(struct v4l2_flash *v4l2_flash)
+{
+ struct v4l2_subdev *sd;
+ struct led_classdev *led_cdev;
+
+ if (IS_ERR(v4l2_flash))
+ return;
+
+ sd = &v4l2_flash->sd;
+ led_cdev = &v4l2_flash->fled_cdev->led_cdev;
+
+ v4l2_async_unregister_subdev(sd);
+ of_node_put(led_cdev->dev->of_node);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ media_entity_cleanup(&sd->entity);
+}
+EXPORT_SYMBOL_GPL(v4l2_flash_release);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_DESCRIPTION("V4L2 Flash sub-device helpers");
+MODULE_LICENSE("GPL v2");
diff --git a/include/media/v4l2-flash.h b/include/media/v4l2-flash.h
new file mode 100644
index 0000000..2d73418
--- /dev/null
+++ b/include/media/v4l2-flash.h
@@ -0,0 +1,144 @@
+/*
+ * V4L2 Flash LED sub-device registration helpers.
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _V4L2_FLASH_H
+#define _V4L2_FLASH_H
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+struct led_classdev_flash;
+struct led_classdev;
+struct v4l2_flash;
+enum led_brightness;
+
+enum ctrl_init_data_id {
+ LED_MODE,
+ TORCH_INTENSITY,
+ FLASH_INTENSITY,
+ INDICATOR_INTENSITY,
+ FLASH_TIMEOUT,
+ STROBE_SOURCE,
+ /*
+ * Only above values are applicable to
+ * the 'ctrls' array in the struct v4l2_flash.
+ */
+ FLASH_STROBE,
+ STROBE_STOP,
+ STROBE_STATUS,
+ FLASH_FAULT,
+ NUM_FLASH_CTRLS,
+};
+
+/*
+ * struct v4l2_flash_ctrl_data - flash control initialization data, filled
+ * basing on the features declared by the LED Flash
+ * class driver in the v4l2_flash_ctrl_config
+ * @config: initialization data for a control
+ * @cid: contains v4l2 flash control id if the config
+ * field was initialized, 0 otherwise
+ */
+struct v4l2_flash_ctrl_data {
+ struct v4l2_ctrl_config config;
+ u32 cid;
+};
+
+struct v4l2_flash_ops {
+ /* setup strobing the flash by hardware pin state assertion */
+ int (*external_strobe_set)(struct v4l2_flash *v4l2_flash,
+ bool enable);
+ /* convert intensity to brightness in a device specific manner */
+ enum led_brightness (*intensity_to_led_brightness)
+ (struct v4l2_flash *v4l2_flash, s32 intensity);
+ /* convert brightness to intensity in a device specific manner */
+ s32 (*led_brightness_to_intensity)
+ (struct v4l2_flash *v4l2_flash, enum led_brightness);
+};
+
+/**
+ * struct v4l2_flash_config - V4L2 Flash sub-device initialization data
+ * @dev_name: the name of the media entity,
+ unique in the system
+ * @intensity: constraints for the LED in a non-flash mode
+ * @flash_faults: bitmask of flash faults that the LED Flash class
+ device can report; corresponding LED_FAULT* bit
+ definitions are available in <uapi/linux/leds.h>
+ * @has_external_strobe: external strobe capability
+ * @indicator_led: signifies that a led is of indicator type
+ */
+struct v4l2_flash_config {
+ char dev_name[32];
+ struct led_flash_setting intensity;
+ u32 flash_faults;
+ unsigned int has_external_strobe:1;
+ unsigned int indicator_led:1;
+};
+
+/**
+ * struct v4l2_flash - Flash sub-device context
+ * @fled_cdev: LED Flash class device controlled by this sub-device
+ * @ops: V4L2 specific flash ops
+ * @sd: V4L2 sub-device
+ * @hdl: flash controls handler
+ * @ctrls: array of pointers to controls, whose values define
+ * the sub-device state
+ */
+struct v4l2_flash {
+ struct led_classdev_flash *fled_cdev;
+ const struct v4l2_flash_ops *ops;
+
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_ctrl *ctrls[STROBE_SOURCE + 1];
+};
+
+static inline struct v4l2_flash *v4l2_subdev_to_v4l2_flash(
+ struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct v4l2_flash, sd);
+}
+
+static inline struct v4l2_flash *v4l2_ctrl_to_v4l2_flash(struct v4l2_ctrl *c)
+{
+ return container_of(c->handler, struct v4l2_flash, hdl);
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+/**
+ * v4l2_flash_init - initialize V4L2 flash led sub-device
+ * @fled_cdev: the LED Flash class device to wrap
+ * @flash_ops: V4L2 Flash device ops
+ * @config: initialization data for V4L2 Flash sub-device
+ *
+ * Create V4L2 Flash sub-device wrapping given LED subsystem device.
+ *
+ * Returns: A valid pointer, or, when an error occurs, the return
+ * value is encoded using ERR_PTR(). Use IS_ERR() to check and
+ * PTR_ERR() to obtain the numeric return value.
+ */
+struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
+ const struct v4l2_flash_ops *ops,
+ struct v4l2_flash_config *config);
+
+/**
+ * v4l2_flash_release - release V4L2 Flash sub-device
+ * @flash: the V4L2 Flash sub-device to release
+ *
+ * Release V4L2 Flash sub-device.
+ */
+void v4l2_flash_release(struct v4l2_flash *v4l2_flash);
+
+#else
+#define v4l2_flash_init(fled_cdev, ops, config) (NULL)
+#define v4l2_flash_release(v4l2_flash)
+#endif /* CONFIG_V4L2_FLASH_LED_CLASS */
+
+#endif /* _V4L2_FLASH_H */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v2 09/11] Documentation: leds: Add description of v4l2-flash sub-device
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-27 13:49 ` [PATCH v2 02/11] leds: add uapi header file Jacek Anaszewski
` (7 subsequent siblings)
8 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds-u79uwXL29TY76Z2rM5mHXA, linux-media-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ, pavel-+ZI9xUNit7I,
cooloney-Re5JQEeQqe8AvxtiuMwx3w, rpurdie-Fm38FmjxZ/leoWH0uzbU5w,
sakari.ailus-X3B1VOXEql0, s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ,
Jacek Anaszewski
This patch extends LED Flash class documention by
the description of interactions with v4l2-flash sub-device.
Signed-off-by: Jacek Anaszewski <j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Kyungmin Park <kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Acked-by: Sakari Ailus <sakari.ailus-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Bryan Wu <cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Richard Purdie <rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org>
---
Documentation/leds/leds-class-flash.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/leds/leds-class-flash.txt b/Documentation/leds/leds-class-flash.txt
index 19bb673..8623413 100644
--- a/Documentation/leds/leds-class-flash.txt
+++ b/Documentation/leds/leds-class-flash.txt
@@ -20,3 +20,16 @@ Following sysfs attributes are exposed for controlling flash LED devices:
- max_flash_timeout
- flash_strobe
- flash_fault
+
+A LED subsystem driver can be controlled also from the level of VideoForLinux2
+subsystem. In order to enable this CONFIG_V4L2_FLASH_LED_CLASS symbol has to
+be defined in the kernel config. The driver must call the v4l2_flash_init
+function to get registered in the V4L2 subsystem. On remove the
+v4l2_flash_release function has to be called (see <media/v4l2-flash.h>).
+
+After proper initialization a V4L2 Flash sub-device is created. The sub-device
+exposes a number of V4L2 controls, which allow for controlling a LED Flash class
+device with use of its internal kernel API.
+Opening the V4L2 Flash sub-device makes the LED subsystem sysfs interface
+unavailable. The interface is re-enabled after the V4L2 Flash sub-device
+is closed.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 09/11] Documentation: leds: Add description of v4l2-flash sub-device
@ 2015-03-27 13:49 ` Jacek Anaszewski
0 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
This patch extends LED Flash class documention by
the description of interactions with v4l2-flash sub-device.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
Documentation/leds/leds-class-flash.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/leds/leds-class-flash.txt b/Documentation/leds/leds-class-flash.txt
index 19bb673..8623413 100644
--- a/Documentation/leds/leds-class-flash.txt
+++ b/Documentation/leds/leds-class-flash.txt
@@ -20,3 +20,16 @@ Following sysfs attributes are exposed for controlling flash LED devices:
- max_flash_timeout
- flash_strobe
- flash_fault
+
+A LED subsystem driver can be controlled also from the level of VideoForLinux2
+subsystem. In order to enable this CONFIG_V4L2_FLASH_LED_CLASS symbol has to
+be defined in the kernel config. The driver must call the v4l2_flash_init
+function to get registered in the V4L2 subsystem. On remove the
+v4l2_flash_release function has to be called (see <media/v4l2-flash.h>).
+
+After proper initialization a V4L2 Flash sub-device is created. The sub-device
+exposes a number of V4L2 controls, which allow for controlling a LED Flash class
+device with use of its internal kernel API.
+Opening the V4L2 Flash sub-device makes the LED subsystem sysfs interface
+unavailable. The interface is re-enabled after the V4L2 Flash sub-device
+is closed.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v2 09/11] Documentation: leds: Add description of v4l2-flash sub-device
2015-03-27 13:49 ` Jacek Anaszewski
(?)
@ 2015-03-28 23:35 ` Sakari Ailus
-1 siblings, 0 replies; 27+ messages in thread
From: Sakari Ailus @ 2015-03-28 23:35 UTC (permalink / raw)
To: Jacek Anaszewski
Cc: linux-leds, linux-media, devicetree, kyungmin.park, pavel,
cooloney, rpurdie, s.nawrocki
Hi Jacek,
On Fri, Mar 27, 2015 at 02:49:43PM +0100, Jacek Anaszewski wrote:
> This patch extends LED Flash class documention by
> the description of interactions with v4l2-flash sub-device.
>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Bryan Wu <cooloney@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> ---
> Documentation/leds/leds-class-flash.txt | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/Documentation/leds/leds-class-flash.txt b/Documentation/leds/leds-class-flash.txt
> index 19bb673..8623413 100644
> --- a/Documentation/leds/leds-class-flash.txt
> +++ b/Documentation/leds/leds-class-flash.txt
> @@ -20,3 +20,16 @@ Following sysfs attributes are exposed for controlling flash LED devices:
> - max_flash_timeout
> - flash_strobe
> - flash_fault
> +
> +A LED subsystem driver can be controlled also from the level of VideoForLinux2
> +subsystem. In order to enable this CONFIG_V4L2_FLASH_LED_CLASS symbol has to
> +be defined in the kernel config. The driver must call the v4l2_flash_init
> +function to get registered in the V4L2 subsystem. On remove the
> +v4l2_flash_release function has to be called (see <media/v4l2-flash.h>).
More information on using the interface functions would be nice, with a
pointer to a driver that uses the interface. The simpler, the better I
guess.
> +
> +After proper initialization a V4L2 Flash sub-device is created. The sub-device
> +exposes a number of V4L2 controls, which allow for controlling a LED Flash class
> +device with use of its internal kernel API.
How about this:
Once the V4L2 sub-device is registered by the driver which created the Media
controller device, the sub-device node acts just as a node of a native V4L2
flash API device would. The calls are simply routed to the LED flash API.
> +Opening the V4L2 Flash sub-device makes the LED subsystem sysfs interface
> +unavailable. The interface is re-enabled after the V4L2 Flash sub-device
> +is closed.
--
Kind regards,
Sakari Ailus
e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v2 10/11] leds: max77693: add support for V4L2 Flash sub-device
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
` (6 preceding siblings ...)
[not found] ` <1427464185-27950-1-git-send-email-j.anaszewski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
@ 2015-03-27 13:49 ` Jacek Anaszewski
2015-03-27 13:49 ` [PATCH v2 11/11] leds: aat1290: " Jacek Anaszewski
8 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
Add support for V4L2 Flash sub-device to the max77693 LED Flash class
driver. The support allows for V4L2 Flash sub-device to take the control
of the LED Flash class device.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
---
drivers/leds/leds-max77693.c | 125 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 119 insertions(+), 6 deletions(-)
diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
index 65c910d..91a4ec9 100644
--- a/drivers/leds/leds-max77693.c
+++ b/drivers/leds/leds-max77693.c
@@ -21,6 +21,7 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <media/v4l2-flash.h>
#include <uapi/linux/leds.h>
#define MODE_OFF 0
@@ -65,6 +66,8 @@ struct max77693_sub_led {
struct led_classdev_flash fled_cdev;
/* assures led-triggers compatibility */
struct work_struct work_brightness_set;
+ /* V4L2 Flash device */
+ struct v4l2_flash *v4l2_flash;
/* brightness cache */
unsigned int torch_brightness;
@@ -642,7 +645,8 @@ static int max77693_led_flash_timeout_set(
}
static int max77693_led_parse_dt(struct max77693_led_device *led,
- struct max77693_led_config_data *cfg)
+ struct max77693_led_config_data *cfg,
+ struct device_node **sub_nodes)
{
struct device *dev = &led->pdev->dev;
struct max77693_sub_led *sub_leds = led->sub_leds;
@@ -688,6 +692,13 @@ static int max77693_led_parse_dt(struct max77693_led_device *led,
return -EINVAL;
}
+ if (sub_nodes[fled_id]) {
+ dev_err(dev,
+ "Conflicting \"led-sources\" DT properties\n");
+ return -EINVAL;
+ }
+
+ sub_nodes[fled_id] = child_node;
sub_leds[fled_id].fled_id = fled_id;
cfg->label[fled_id] =
@@ -776,11 +787,12 @@ static void max77693_led_validate_configuration(struct max77693_led_device *led,
}
static int max77693_led_get_configuration(struct max77693_led_device *led,
- struct max77693_led_config_data *cfg)
+ struct max77693_led_config_data *cfg,
+ struct device_node **sub_nodes)
{
int ret;
- ret = max77693_led_parse_dt(led, cfg);
+ ret = max77693_led_parse_dt(led, cfg, sub_nodes);
if (ret < 0)
return ret;
@@ -828,6 +840,66 @@ static void max77693_init_flash_settings(struct max77693_sub_led *sub_led,
setting->val = setting->max;
}
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+
+static int max77693_led_external_strobe_set(
+ struct v4l2_flash *v4l2_flash,
+ bool enable)
+{
+ struct max77693_sub_led *sub_led =
+ flcdev_to_sub_led(v4l2_flash->fled_cdev);
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ int fled_id = sub_led->fled_id;
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ if (enable)
+ ret = max77693_add_mode(led, MODE_FLASH_EXTERNAL(fled_id));
+ else
+ ret = max77693_clear_mode(led, MODE_FLASH_EXTERNAL(fled_id));
+
+ mutex_unlock(&led->lock);
+
+ return ret;
+}
+
+static void max77693_init_v4l2_flash_config(struct max77693_sub_led *sub_led,
+ struct max77693_led_config_data *led_cfg,
+ struct v4l2_flash_config *v4l2_sd_cfg)
+{
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ struct device *dev = &led->pdev->dev;
+ struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
+ struct i2c_client *i2c = iodev->i2c;
+ struct led_flash_setting *s;
+
+ snprintf(v4l2_sd_cfg->dev_name, sizeof(v4l2_sd_cfg->dev_name),
+ "%s %d-%04x", sub_led->fled_cdev.led_cdev.name,
+ i2c_adapter_id(i2c->adapter), i2c->addr);
+
+ s = &v4l2_sd_cfg->intensity;
+ s->min = TORCH_IOUT_MIN;
+ s->max = sub_led->fled_cdev.led_cdev.max_brightness * TORCH_IOUT_STEP;
+ s->step = TORCH_IOUT_STEP;
+ s->val = s->max;
+
+ /* Init flash faults config */
+ v4l2_sd_cfg->flash_faults = LED_FAULT_OVER_VOLTAGE |
+ LED_FAULT_SHORT_CIRCUIT |
+ LED_FAULT_OVER_CURRENT;
+
+ v4l2_sd_cfg->has_external_strobe = true;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+ .external_strobe_set = max77693_led_external_strobe_set,
+};
+
+#else
+#define max77693_init_v4l2_flash_config(sub_led, led_cfg, v4l2_sd_cfg)
+#endif
+
static void max77693_init_fled_cdev(struct max77693_sub_led *sub_led,
struct max77693_led_config_data *led_cfg)
{
@@ -859,12 +931,49 @@ static void max77693_init_fled_cdev(struct max77693_sub_led *sub_led,
sub_led->flash_timeout = fled_cdev->timeout.val;
}
+static int max77693_register_led(struct max77693_sub_led *sub_led,
+ struct max77693_led_config_data *led_cfg,
+ struct device_node *sub_node)
+{
+ struct max77693_led_device *led = sub_led_to_led(sub_led);
+ struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
+ struct device *dev = &led->pdev->dev;
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+ struct v4l2_flash_config v4l2_sd_cfg = {};
+#endif
+ int ret;
+
+ /* Register in the LED subsystem */
+ ret = led_classdev_flash_register(dev, fled_cdev);
+ if (ret < 0)
+ return ret;
+
+ max77693_init_v4l2_flash_config(sub_led, led_cfg, &v4l2_sd_cfg);
+
+ fled_cdev->led_cdev.dev->of_node = sub_node;
+
+ /* Register in the V4L2 subsystem. */
+ sub_led->v4l2_flash = v4l2_flash_init(fled_cdev, &v4l2_flash_ops,
+ &v4l2_sd_cfg);
+ if (IS_ERR(sub_led->v4l2_flash)) {
+ ret = PTR_ERR(sub_led->v4l2_flash);
+ goto err_v4l2_flash_init;
+ }
+
+ return 0;
+
+err_v4l2_flash_init:
+ led_classdev_flash_unregister(fled_cdev);
+ return ret;
+}
+
static int max77693_led_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
struct max77693_led_device *led;
struct max77693_sub_led *sub_leds;
+ struct device_node *sub_nodes[2] = {};
struct max77693_led_config_data led_cfg = {};
int init_fled_cdev[2], i, ret;
@@ -878,7 +987,7 @@ static int max77693_led_probe(struct platform_device *pdev)
sub_leds = led->sub_leds;
platform_set_drvdata(pdev, led);
- ret = max77693_led_get_configuration(led, &led_cfg);
+ ret = max77693_led_get_configuration(led, &led_cfg, sub_nodes);
if (ret < 0)
return ret;
@@ -899,12 +1008,13 @@ static int max77693_led_probe(struct platform_device *pdev)
max77693_init_fled_cdev(&sub_leds[i], &led_cfg);
- /* Register LED Flash class device(s) */
+ /* Register LED Flash class and related V4L2 Flash device(s) */
for (i = FLED1; i <= FLED2; ++i) {
if (!init_fled_cdev[i])
continue;
- ret = led_classdev_flash_register(dev, &sub_leds[i].fled_cdev);
+ ret = max77693_register_led(&sub_leds[i], &led_cfg,
+ sub_nodes[i]);
if (ret < 0) {
/*
* At this moment FLED1 might have been already
@@ -923,6 +1033,7 @@ err_register_led2:
/* It is possible than only FLED2 was to be registered */
if (!init_fled_cdev[FLED1])
goto err_register_led1;
+ v4l2_flash_release(sub_leds[FLED1].v4l2_flash);
led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
err_register_led1:
mutex_destroy(&led->lock);
@@ -936,11 +1047,13 @@ static int max77693_led_remove(struct platform_device *pdev)
struct max77693_sub_led *sub_leds = led->sub_leds;
if (led->iout_joint || max77693_fled_used(led, FLED1)) {
+ v4l2_flash_release(sub_leds[FLED1].v4l2_flash);
led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
cancel_work_sync(&sub_leds[FLED1].work_brightness_set);
}
if (!led->iout_joint && max77693_fled_used(led, FLED2)) {
+ v4l2_flash_release(sub_leds[FLED2].v4l2_flash);
led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
cancel_work_sync(&sub_leds[FLED2].work_brightness_set);
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 11/11] leds: aat1290: add support for V4L2 Flash sub-device
2015-03-27 13:49 [PATCH v2 00/11] LED / flash API integration Jacek Anaszewski
` (7 preceding siblings ...)
2015-03-27 13:49 ` [PATCH v2 10/11] leds: max77693: add support for V4L2 Flash sub-device Jacek Anaszewski
@ 2015-03-27 13:49 ` Jacek Anaszewski
8 siblings, 0 replies; 27+ messages in thread
From: Jacek Anaszewski @ 2015-03-27 13:49 UTC (permalink / raw)
To: linux-leds, linux-media
Cc: devicetree, kyungmin.park, pavel, cooloney, rpurdie,
sakari.ailus, s.nawrocki, Jacek Anaszewski
Add support for V4L2 Flash sub-device to the aat1290 LED Flash class
driver. The support allows for V4L2 Flash sub-device to take the control
of the LED Flash class device.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
---
drivers/leds/Kconfig | 1 +
drivers/leds/leds-aat1290.c | 150 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 149 insertions(+), 2 deletions(-)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c3b5b027..d73f43f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -47,6 +47,7 @@ config LEDS_AAT1290
depends on LEDS_CLASS_FLASH
depends on GPIOLIB
depends on OF
+ depends on PINCTRL
help
This option enables support for the LEDs on the AAT1290.
diff --git a/drivers/leds/leds-aat1290.c b/drivers/leds/leds-aat1290.c
index acfae35..34fd5c4 100644
--- a/drivers/leds/leds-aat1290.c
+++ b/drivers/leds/leds-aat1290.c
@@ -17,9 +17,11 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <media/v4l2-flash.h>
#define AAT1290_MOVIE_MODE_CURRENT_ADDR 17
#define AAT1290_MAX_MM_CURR_PERCENT_0 16
@@ -53,11 +55,17 @@ struct aat1290_led {
/* corresponding LED Flash class device */
struct led_classdev_flash fled_cdev;
+ /* V4L2 Flash device */
+ struct v4l2_flash *v4l2_flash;
/* FLEN pin */
struct gpio_desc *gpio_fl_en;
/* EN|SET pin */
struct gpio_desc *gpio_en_set;
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+ /* movie mode current scale */
+ int *mm_current_scale;
+#endif
/* maximum flash timeout */
u32 max_flash_tm;
@@ -224,11 +232,16 @@ static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
return 0;
}
-static int aat1290_led_parse_dt(struct aat1290_led *led)
+static int aat1290_led_parse_dt(struct aat1290_led *led,
+ struct device_node **sub_node,
+ struct v4l2_flash_config *v4l2_sd_cfg)
{
struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
struct device *dev = &led->pdev->dev;
struct device_node *child_node;
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+ struct pinctrl *pinctrl;
+#endif
int ret = 0;
led->gpio_fl_en = devm_gpiod_get(dev, "flen");
@@ -245,6 +258,17 @@ static int aat1290_led_parse_dt(struct aat1290_led *led)
return ret;
}
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+ pinctrl = devm_pinctrl_get_select_default(&led->pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ v4l2_sd_cfg->has_external_strobe = false;
+ dev_info(dev,
+ "No support for external strobe detected.\n");
+ } else {
+ v4l2_sd_cfg->has_external_strobe = true;
+ }
+#endif
+
child_node = of_get_next_available_child(dev->of_node, NULL);
if (!child_node) {
dev_err(dev, "No DT child node found for connected LED.\n");
@@ -270,6 +294,8 @@ static int aat1290_led_parse_dt(struct aat1290_led *led)
return ret;
}
+ *sub_node = child_node;
+
return ret;
}
@@ -286,6 +312,100 @@ static void aat1290_init_flash_timeout(struct aat1290_led *led)
setting->val = setting->max;
}
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+enum led_brightness aat1290_intensity_to_brightness(
+ struct v4l2_flash *v4l2_flash,
+ s32 intensity)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+ int i;
+
+ for (i = AAT1290_MM_CURRENT_SCALE_SIZE - 1; i >= 0; --i)
+ if (intensity >= led->mm_current_scale[i])
+ return i + 1;
+
+ return 1;
+}
+
+s32 aat1290_brightness_to_intensity(struct v4l2_flash *v4l2_flash,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+ return led->mm_current_scale[brightness - 1];
+}
+
+static int aat1290_led_external_strobe_set(struct v4l2_flash *v4l2_flash,
+ bool enable)
+{
+ struct aat1290_led *led = fled_cdev_to_led(v4l2_flash->fled_cdev);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct pinctrl *pinctrl;
+
+ gpiod_direction_output(led->gpio_fl_en, 0);
+ gpiod_direction_output(led->gpio_en_set, 0);
+
+ led->movie_mode = false;
+ led_cdev->brightness = 0;
+
+ pinctrl = devm_pinctrl_get_select(&led->pdev->dev,
+ enable ? "isp" : "host");
+ if (IS_ERR(pinctrl)) {
+ dev_warn(&led->pdev->dev, "Unable to switch strobe source.\n");
+ return PTR_ERR(pinctrl);
+ }
+
+ return 0;
+}
+
+int init_mm_current_scale(struct aat1290_led *led)
+{
+ int max_mm_current_percent[] = { 20, 22, 25, 28, 32, 36, 40, 45, 50, 56,
+ 63, 71, 79, 89, 100 };
+ int i, max_mm_current = AAT1290_MAX_MM_CURRENT(led->max_flash_current);
+
+ led->mm_current_scale = devm_kzalloc(&led->pdev->dev,
+ sizeof(max_mm_current_percent),
+ GFP_KERNEL);
+ if (!led->mm_current_scale)
+ return -ENOMEM;
+
+ for (i = 0; i < AAT1290_MM_CURRENT_SCALE_SIZE; ++i)
+ led->mm_current_scale[i] = max_mm_current *
+ max_mm_current_percent[i] / 100;
+
+ return 0;
+}
+
+static void aat1290_init_v4l2_flash_config(struct aat1290_led *led,
+ struct v4l2_flash_config *v4l2_sd_cfg)
+{
+ struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
+ struct led_flash_setting *s;
+
+ strlcpy(v4l2_sd_cfg->dev_name, led_cdev->name,
+ sizeof(v4l2_sd_cfg->dev_name));
+
+ s = &v4l2_sd_cfg->intensity;
+ s->min = led->mm_current_scale[0];
+ s->max = led->mm_current_scale[AAT1290_MM_CURRENT_SCALE_SIZE - 1];
+ s->step = 1;
+ s->val = s->max;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+ .external_strobe_set = aat1290_led_external_strobe_set,
+ .intensity_to_led_brightness = aat1290_intensity_to_brightness,
+ .led_brightness_to_intensity = aat1290_brightness_to_intensity,
+};
+#else
+#define aat1290_init_v4l2_flash_config(led, v4l2_sd_cfg)
+#define init_mm_current_scale(led) (0)
+#endif
+
static const struct led_flash_ops flash_ops = {
.strobe_set = aat1290_led_flash_strobe_set,
.timeout_set = aat1290_led_flash_timeout_set,
@@ -294,9 +414,11 @@ static const struct led_flash_ops flash_ops = {
static int aat1290_led_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct device_node *sub_node = NULL;
struct aat1290_led *led;
struct led_classdev *led_cdev;
struct led_classdev_flash *fled_cdev;
+ struct v4l2_flash_config v4l2_sd_cfg = {};
int ret;
led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
@@ -310,7 +432,15 @@ static int aat1290_led_probe(struct platform_device *pdev)
fled_cdev->ops = &flash_ops;
led_cdev = &fled_cdev->led_cdev;
- ret = aat1290_led_parse_dt(led);
+ ret = aat1290_led_parse_dt(led, &sub_node, &v4l2_sd_cfg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Init non-linear movie mode current scale basing
+ * on the max flash current from Device Tree binding.
+ */
+ ret = init_mm_current_scale(led);
if (ret < 0)
return ret;
@@ -330,8 +460,23 @@ static int aat1290_led_probe(struct platform_device *pdev)
if (ret < 0)
goto err_flash_register;
+ aat1290_init_v4l2_flash_config(led, &v4l2_sd_cfg);
+
+ led_cdev->dev->of_node = sub_node;
+
+ /* Create V4L2 Flash subdev. */
+ led->v4l2_flash = v4l2_flash_init(fled_cdev,
+ &v4l2_flash_ops,
+ &v4l2_sd_cfg);
+ if (IS_ERR(led->v4l2_flash)) {
+ ret = PTR_ERR(led->v4l2_flash);
+ goto error_v4l2_flash_init;
+ }
+
return 0;
+error_v4l2_flash_init:
+ led_classdev_flash_unregister(fled_cdev);
err_flash_register:
mutex_destroy(&led->lock);
@@ -342,6 +487,7 @@ static int aat1290_led_remove(struct platform_device *pdev)
{
struct aat1290_led *led = platform_get_drvdata(pdev);
+ v4l2_flash_release(led->v4l2_flash);
led_classdev_flash_unregister(&led->fled_cdev);
cancel_work_sync(&led->work_brightness_set);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 27+ messages in thread