* Any side effect if turn off amd_iommu
@ 2015-03-25 3:30 AceLan Kao
[not found] ` <CAFv23QmxQ3vJnMEGN0TNR3vLAx1MN7ptB0y3QQLKciqfT3OBsQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: AceLan Kao @ 2015-03-25 3:30 UTC (permalink / raw)
To: Joerg Roedel, iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi,
We have some AMD machines(AMD cpu and graphics) that need to set
amd_iommu=off to work.
Some of them have wifi issue that it can't connect to any AP(no
interrupt)(can set noapic to workaround it, too),
and some of them have graphics issues.
The only workaround we found is to set amd_iommu=off, and it fixes both issues.
I have 2 questions.
1. What kind of these issues would be, are they a driver issue or a
BIOS issue? If it's a BIOS issue, what we should tell the BIOS
engineers, so that they know how to fix it?
2. Some of the machines may not have the chance to get a BIOS update,
do you think it's okay to add a quirk in amd_iommu driver to blacklist
out those machines? Are there any side effects if we do so?
Thanks.
Beat regards,
AceLan Kao.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23QmxQ3vJnMEGN0TNR3vLAx1MN7ptB0y3QQLKciqfT3OBsQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2015-03-25 14:04 ` Joerg Roedel
[not found] ` <20150325140410.GS4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: Joerg Roedel @ 2015-03-25 14:04 UTC (permalink / raw)
To: AceLan Kao; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Mar 25, 2015 at 11:30:20AM +0800, AceLan Kao wrote:
> We have some AMD machines(AMD cpu and graphics) that need to set
> amd_iommu=off to work.
> Some of them have wifi issue that it can't connect to any AP(no
> interrupt)(can set noapic to workaround it, too),
> and some of them have graphics issues.
> The only workaround we found is to set amd_iommu=off, and it fixes both issues.
>
> I have 2 questions.
> 1. What kind of these issues would be, are they a driver issue or a
> BIOS issue? If it's a BIOS issue, what we should tell the BIOS
> engineers, so that they know how to fix it?
> 2. Some of the machines may not have the chance to get a BIOS update,
> do you think it's okay to add a quirk in amd_iommu driver to blacklist
> out those machines? Are there any side effects if we do so?
Hard to tell what the issue is. Can you please boot the affected machine
with AMD IOMMU enabled and amd_iommu_dump on the command line and send
me dmesg of the machine after boot?
Thanks,
Joerg
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <20150325140410.GS4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2015-03-26 2:26 ` AceLan Kao
[not found] ` <CAFv23Qn93z4pE6RtURgoiBADpgCWZ6gfpMPn3akfJibudRi+Qg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: AceLan Kao @ 2015-03-26 2:26 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 1353 bytes --]
Hi Joerg,
Here you are.
I've tried to add iommu_dump, amd_iommu_dump, and amd_iommu_dump=true
on kernel command line,
but didn't find anything useful.
The attached log uses "amd_iommu_dump=true"
Best regards,
AceLan Kao.
2015-03-25 22:04 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> On Wed, Mar 25, 2015 at 11:30:20AM +0800, AceLan Kao wrote:
>> We have some AMD machines(AMD cpu and graphics) that need to set
>> amd_iommu=off to work.
>> Some of them have wifi issue that it can't connect to any AP(no
>> interrupt)(can set noapic to workaround it, too),
>> and some of them have graphics issues.
>> The only workaround we found is to set amd_iommu=off, and it fixes both issues.
>>
>> I have 2 questions.
>> 1. What kind of these issues would be, are they a driver issue or a
>> BIOS issue? If it's a BIOS issue, what we should tell the BIOS
>> engineers, so that they know how to fix it?
>> 2. Some of the machines may not have the chance to get a BIOS update,
>> do you think it's okay to add a quirk in amd_iommu driver to blacklist
>> out those machines? Are there any side effects if we do so?
>
> Hard to tell what the issue is. Can you please boot the affected machine
> with AMD IOMMU enabled and amd_iommu_dump on the command line and send
> me dmesg of the machine after boot?
>
> Thanks,
>
> Joerg
>
[-- Attachment #2: dmesg_iommu_dump.log --]
[-- Type: text/x-log, Size: 75957 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump=true quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005d9b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005d9b6000-0x000000005e8b1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005e8b2000-0x000000005efb1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005efb2000-0x000000005effefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005efff000-0x000000005effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ProBook 445G2/2234, BIOS M75 Ver. 01.07 09/16/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000FF800000 mask FFFFFF800000 write-protect
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000025f000000 aka 9712M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x5f000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25ee00000-0x25effffff]
[ 0.000000] [mem 0x25ee00000-0x25effffff] page 2M
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25edfffff]
[ 0.000000] [mem 0x25c000000-0x25edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
[ 0.000000] [mem 0x200000000-0x23fffffff] page 1G
[ 0.000000] [mem 0x240000000-0x25bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5d9b5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x5d7fffff] page 2M
[ 0.000000] [mem 0x5d800000-0x5d9b5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x5efff000-0x5effffff]
[ 0.000000] [mem 0x5efff000-0x5effffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x342ee000-0x3616efff]
[ 0.000000] ACPI: RSDP 00000000000f2f90 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000005effd0e8 00009C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 000000005effb000 00010C (v05 HPQOEM 180F 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 000000005efd8000 01E7AD (v01 HPQOEM 180F 00000001 INTL 20130927)
[ 0.000000] ACPI: FACS 000000005ed69000 000040
[ 0.000000] ACPI: HPET 000000005effa000 000038 (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 000000005eff9000 000090 (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 000000005eff8000 00003C (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 000000005eff7000 000032 (v02 HPQOEM 180F 00000000 HP 00000001)
[ 0.000000] ACPI: FPDT 000000005efd5000 000044 (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 000000005efd4000 000038 (v00 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 000000005efd3000 000B9C (v01 AMD BALLINA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000005efc9000 009399 (v02 AMD BALLINA 00000002 MSFT 04000000)
[ 0.000000] ACPI: IVRS 000000005efc8000 000078 (v02 AMD BALLINA 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 000000005efc7000 000550 (v01 AMD BALLINA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000005efc6000 000789 (v01 HP AMDSGTBL 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 000000005efc5000 000325 (v01 HP HPZPODDT 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 000000005efc4000 00081B (v01 AMD CPMADPS4 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 000000005efc2000 001207 (v01 AMD CPMCMN 00000001 INTL 20130927)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25effffff]
[ 0.000000] NODE_DATA [mem 0x25eff9000-0x25effdfff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257600000-ffff88025e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x5d9b5fff]
[ 0.000000] node 0: [mem 0x5efff000-0x5effffff]
[ 0.000000] node 0: [mem 0x100000000-0x25effffff]
[ 0.000000] On node 0 totalpages: 1821012
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5927 pages used for memmap
[ 0.000000] DMA32 zone: 379319 pages, LIFO batch:31
[ 0.000000] Normal zone: 22464 pages used for memmap
[ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5d9b6000-0x5e8b1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5e8b2000-0x5efb1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5efb2000-0x5effefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x5f000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025ec00000 s82368 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1792536
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump=true quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 54000000
[ 0.000000] PM: Registered nosave memory: [mem 0x54000000-0x57ffffff]
[ 0.000000] Memory: 6989436K/7284048K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 294612K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 29360128 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1896.472 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3792.94 BogoMIPS (lpj=7585888)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000040] Security Framework initialized
[ 0.000064] AppArmor: AppArmor initialized
[ 0.000065] Yama: becoming mindful.
[ 0.000688] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003568] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.004863] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.005153] Initializing cgroup subsys memory
[ 0.005163] Initializing cgroup subsys devices
[ 0.005165] Initializing cgroup subsys freezer
[ 0.005168] Initializing cgroup subsys blkio
[ 0.005169] Initializing cgroup subsys perf_event
[ 0.005172] Initializing cgroup subsys hugetlb
[ 0.005199] tseg: 005f000000
[ 0.005201] CPU: Physical Processor ID: 0
[ 0.005203] CPU: Processor Core ID: 0
[ 0.005205] mce: CPU supports 7 MCE banks
[ 0.005212] LVT offset 1 assigned for vector 0xf9
[ 0.005221] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.005221] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.005221] tlb_flushall_shift: 5
[ 0.005347] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.006447] ACPI: Core revision 20131115
[ 0.017553] ACPI: All ACPI Tables successfully acquired
[ 0.056583] ftrace: allocating 28554 entries in 112 pages
[ 0.072165] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
[ 0.072169] AMD-Vi: mmio-addr: 00000000feb80000
[ 0.072213] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
[ 0.072214] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
[ 0.073260] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
[ 0.073262] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
[ 0.073272] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
[ 0.073274] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
[ 0.073276] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
[ 0.271580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.311273] smpboot: CPU0: AMD A10-7300 Radeon R6, 10 Compute Cores 4C+6G (fam: 15, model: 30, stepping: 01)
[ 0.415445] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.415452] ... version: 0
[ 0.415454] ... bit width: 48
[ 0.415456] ... generic registers: 6
[ 0.415457] ... value mask: 0000ffffffffffff
[ 0.415459] ... max period: 00007fffffffffff
[ 0.415460] ... fixed-purpose events: 0
[ 0.415461] ... event mask: 000000000000003f
[ 0.417469] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.417572] x86: Booting SMP configuration:
[ 0.417575] .... node #0, CPUs: #1 #2 #3
[ 0.457291] x86: Booted up 1 node, 4 CPUs
[ 0.457296] smpboot: Total of 4 processors activated (15171.77 BogoMIPS)
[ 0.458465] devtmpfs: initialized
[ 0.461887] EVM: security.selinux
[ 0.461889] EVM: security.SMACK64
[ 0.461891] EVM: security.ima
[ 0.461893] EVM: security.capability
[ 0.462005] PM: Registering ACPI NVS region [mem 0x5e8b2000-0x5efb1fff] (7340032 bytes)
[ 0.463313] pinctrl core: initialized pinctrl subsystem
[ 0.463397] regulator-dummy: no parameters
[ 0.463495] RTC time: 2:13:19, date: 03/26/15
[ 0.463544] NET: Registered protocol family 16
[ 0.463711] cpuidle: using governor ladder
[ 0.463713] cpuidle: using governor menu
[ 0.463926] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.463928] ACPI: bus type PCI registered
[ 0.463930] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.464081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.464084] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.480530] PCI: Using configuration type 1 for base access
[ 0.480781] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.480783] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.480784] mtrr: probably your BIOS does not setup all CPUs.
[ 0.480785] mtrr: corrected configuration.
[ 0.482074] bio: create slab <bio-0> at 0
[ 0.482299] ACPI: Added _OSI(Module Device)
[ 0.482301] ACPI: Added _OSI(Processor Device)
[ 0.482303] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.482304] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.128232] ACPI: Interpreter enabled
[ 3.128255] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 3.128263] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 3.128291] ACPI: (supports S0 S3 S4 S5)
[ 3.128294] ACPI: Using IOAPIC for interrupt routing
[ 3.128639] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.128952] ACPI: No dock devices found.
[ 3.134669] ACPI: Power Resource [APPR] (off)
[ 3.146814] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 3.147339] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 3.147349] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.147860] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.148084] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf5ff])
[ 3.148088] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 3.148407] PCI host bridge to bus 0000:00
[ 3.148412] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.148414] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 3.148416] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 3.148418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 3.148419] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 3.148421] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 3.148423] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 3.148424] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 3.148426] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 3.148428] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 3.148429] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 3.148431] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 3.148432] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 3.148434] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 3.148435] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 3.148437] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff]
[ 3.148439] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff]
[ 3.148440] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfffdffff]
[ 3.148448] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 3.148580] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 3.148737] pci 0000:00:01.0: [1002:130a] type 00 class 0x030000
[ 3.148751] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 3.148761] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 3.148767] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff]
[ 3.148774] pci 0000:00:01.0: reg 0x24: [mem 0xd6900000-0xd693ffff]
[ 3.148781] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 3.148815] pci 0000:00:01.0: supports D1 D2
[ 3.148817] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 3.148905] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 3.148917] pci 0000:00:01.1: reg 0x10: [mem 0xd6940000-0xd6943fff 64bit]
[ 3.148975] pci 0000:00:01.1: supports D1 D2
[ 3.149111] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 3.149199] pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
[ 3.149268] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 3.149421] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 3.149518] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[ 3.149587] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 3.149650] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 3.149683] pci 0000:00:03.2: [1022:1426] type 01 class 0x060400
[ 3.149751] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 3.149809] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 3.149912] pci 0000:00:03.4: [1022:1426] type 01 class 0x060400
[ 3.149980] pci 0000:00:03.4: PME# supported from D0 D3hot D3cold
[ 3.150039] pci 0000:00:03.4: System wakeup disabled by ACPI
[ 3.150132] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 3.150283] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 3.150307] pci 0000:00:10.0: reg 0x10: [mem 0xd6948000-0xd6949fff 64bit]
[ 3.150417] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 3.150481] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 3.150555] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 3.150575] pci 0000:00:11.0: reg 0x10: [io 0x6118-0x611f]
[ 3.150585] pci 0000:00:11.0: reg 0x14: [io 0x6124-0x6127]
[ 3.150595] pci 0000:00:11.0: reg 0x18: [io 0x6110-0x6117]
[ 3.150605] pci 0000:00:11.0: reg 0x1c: [io 0x6120-0x6123]
[ 3.150615] pci 0000:00:11.0: reg 0x20: [io 0x6100-0x610f]
[ 3.150626] pci 0000:00:11.0: reg 0x24: [mem 0xd694f000-0xd694f7ff]
[ 3.150775] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 3.150789] pci 0000:00:12.0: reg 0x10: [mem 0xd694e000-0xd694efff]
[ 3.150993] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 3.151076] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 3.151098] pci 0000:00:12.2: reg 0x10: [mem 0xd694d000-0xd694d0ff]
[ 3.151188] pci 0000:00:12.2: supports D1 D2
[ 3.151190] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.151255] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 3.151327] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 3.151344] pci 0000:00:13.0: reg 0x10: [mem 0xd694c000-0xd694cfff]
[ 3.151504] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 3.151547] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 3.151568] pci 0000:00:13.2: reg 0x10: [mem 0xd694b000-0xd694b0ff]
[ 3.151657] pci 0000:00:13.2: supports D1 D2
[ 3.151658] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.151720] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 3.151791] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 3.151976] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 3.152001] pci 0000:00:14.2: reg 0x10: [mem 0xd6944000-0xd6947fff 64bit]
[ 3.152072] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 3.152147] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 3.152217] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 3.152387] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 3.152516] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 3.152531] pci 0000:00:14.5: reg 0x10: [mem 0xd694a000-0xd694afff]
[ 3.152688] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 3.152763] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 3.152831] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 3.152903] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 3.152977] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 3.153046] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 3.153281] pci 0000:01:00.0: [1002:6901] type 00 class 0x038000
[ 3.153313] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 3.153337] pci 0000:01:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref]
[ 3.153353] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff]
[ 3.153369] pci 0000:01:00.0: reg 0x24: [mem 0xd6800000-0xd683ffff]
[ 3.153385] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 3.153482] pci 0000:01:00.0: supports D1 D2
[ 3.161530] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 3.161540] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
[ 3.161545] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
[ 3.161550] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[ 3.161711] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 3.161744] pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 3.161780] pci 0000:02:00.0: reg 0x18: [mem 0xd5804000-0xd5804fff 64bit]
[ 3.161801] pci 0000:02:00.0: reg 0x20: [mem 0xd5800000-0xd5803fff 64bit]
[ 3.161887] pci 0000:02:00.0: supports D1 D2
[ 3.161889] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.161950] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 3.168361] pci 0000:00:03.1: PCI bridge to [bus 02]
[ 3.168372] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
[ 3.168377] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
[ 3.168383] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
[ 3.168530] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 3.168556] pci 0000:03:00.0: reg 0x10: [mem 0xd4800000-0xd487ffff 64bit]
[ 3.168606] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 3.168662] pci 0000:03:00.0: supports D1 D2
[ 3.168664] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.177599] pci 0000:00:03.2: PCI bridge to [bus 03]
[ 3.177610] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
[ 3.177614] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
[ 3.177620] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
[ 3.177754] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
[ 3.177779] pci 0000:04:00.0: reg 0x10: [mem 0xd3800000-0xd3800fff]
[ 3.177906] pci 0000:04:00.0: supports D1 D2
[ 3.177908] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 3.184347] pci 0000:00:03.4: PCI bridge to [bus 04]
[ 3.184358] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
[ 3.184363] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
[ 3.184369] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[ 3.184540] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 3.184551] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 3.184554] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 3.184556] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 3.184558] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 3.184560] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 3.184562] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 3.184564] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 3.184566] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 3.184568] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 3.184570] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 3.184572] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 3.184573] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 3.184575] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 3.184577] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 3.184579] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xdfffffff] (subtractive decode)
[ 3.184581] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed3ffff] (subtractive decode)
[ 3.184583] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xfffdffff] (subtractive decode)
[ 3.184627] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 3.185979] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.186077] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.186174] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.186270] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.186346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.186407] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.186467] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.186527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.187408] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 3.187419] ACPI: \_SB_.PCI0: notify handler is installed
[ 3.187533] Found 1 acpi root devices
[ 3.187608] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 3.187767] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 3.187770] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.187781] vgaarb: loaded
[ 3.187783] vgaarb: bridge control possible 0000:00:01.0
[ 3.188000] SCSI subsystem initialized
[ 3.188135] libata version 3.00 loaded.
[ 3.188180] ACPI: bus type USB registered
[ 3.188204] usbcore: registered new interface driver usbfs
[ 3.188215] usbcore: registered new interface driver hub
[ 3.188252] usbcore: registered new device driver usb
[ 3.188466] PCI: Using ACPI for IRQ routing
[ 3.197688] PCI: pci_cache_line_size set to 64 bytes
[ 3.197791] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 3.197794] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 3.197797] e820: reserve RAM buffer [mem 0x5d9b6000-0x5fffffff]
[ 3.197798] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
[ 3.197800] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 3.197927] NetLabel: Initializing
[ 3.197930] NetLabel: domain hash size = 128
[ 3.197931] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.197946] NetLabel: unlabeled traffic allowed by default
[ 3.198213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 3.198218] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 3.200349] Switched to clocksource hpet
[ 3.207979] AppArmor: AppArmor Filesystem Enabled
[ 3.208013] pnp: PnP ACPI init
[ 3.208029] ACPI: bus type PNP registered
[ 3.208173] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 3.208176] system 00:00: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 3.208178] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 3.208181] system 00:00: [mem 0xfec20000-0xfec20fff] could not be reserved
[ 3.208183] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 3.208187] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.208434] pnp 00:01: [dma 4]
[ 3.208458] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 3.208533] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 3.208560] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 3.208660] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 3.208662] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 3.208664] system 00:04: [io 0x04d6] has been reserved
[ 3.208666] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 3.208668] system 00:04: [io 0x077a] has been reserved
[ 3.208670] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 3.208672] system 00:04: [io 0x0c14] has been reserved
[ 3.208674] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 3.208675] system 00:04: [io 0x0c6c] has been reserved
[ 3.208677] system 00:04: [io 0x0c6f] has been reserved
[ 3.208679] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 3.208681] system 00:04: [io 0x0220-0x0227] has been reserved
[ 3.208683] system 00:04: [io 0x0260-0x0273] has been reserved
[ 3.208685] system 00:04: [io 0x0800] has been reserved
[ 3.208687] system 00:04: [io 0x0804] has been reserved
[ 3.208688] system 00:04: [io 0x087f] has been reserved
[ 3.208690] system 00:04: [io 0x0cdc-0x0cdf] has been reserved
[ 3.208692] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 3.208695] system 00:04: [io 0x0200-0x027f] could not be reserved
[ 3.208697] system 00:04: [io 0x1770-0x1777] has been reserved
[ 3.208699] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.208779] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 3.208782] system 00:05: [mem 0x00100000-0x9fffffff] could not be reserved
[ 3.208784] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
[ 3.208786] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 3.208909] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.209037] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 3.209101] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 3.209136] pnp 00:09: Plug and Play ACPI device, IDs SYN301c SYN0100 SYN0002 PNP0f13 (active)
[ 3.209337] pnp 00:0a: Plug and Play ACPI device, IDs HPQ6007 (active)
[ 3.209556] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 3.209795] pnp: PnP ACPI: found 12 devices
[ 3.209796] ACPI: bus type PNP unregistered
[ 3.217642] pci 0000:00:01.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 3.217646] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 3.217650] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 3.217724] pci 0000:00:01.0: BAR 6: assigned [mem 0xb0200000-0xb021ffff pref]
[ 3.217728] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6840000-0xd685ffff pref]
[ 3.217731] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 3.217734] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
[ 3.217738] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
[ 3.217741] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[ 3.217747] pci 0000:00:03.1: PCI bridge to [bus 02]
[ 3.217750] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
[ 3.217754] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
[ 3.217758] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
[ 3.217764] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1800000-0xd180ffff pref]
[ 3.217766] pci 0000:00:03.2: PCI bridge to [bus 03]
[ 3.217768] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
[ 3.217772] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
[ 3.217776] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
[ 3.217781] pci 0000:00:03.4: PCI bridge to [bus 04]
[ 3.217783] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
[ 3.217787] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
[ 3.217791] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[ 3.217796] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 3.217839] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 3.217840] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 3.217842] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.217844] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 3.217846] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 3.217847] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 3.217849] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 3.217851] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 3.217852] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 3.217854] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 3.217856] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 3.217857] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 3.217859] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 3.217860] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
[ 3.217862] pci_bus 0000:00: resource 18 [mem 0xa0000000-0xdfffffff]
[ 3.217864] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfed3ffff]
[ 3.217865] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xfffdffff]
[ 3.217868] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 3.217869] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd68fffff]
[ 3.217871] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
[ 3.217873] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 3.217875] pci_bus 0000:02: resource 1 [mem 0xd5800000-0xd67fffff]
[ 3.217876] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd17fffff 64bit pref]
[ 3.217878] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 3.217880] pci_bus 0000:03: resource 1 [mem 0xd4800000-0xd57fffff]
[ 3.217882] pci_bus 0000:03: resource 2 [mem 0xd1800000-0xd27fffff 64bit pref]
[ 3.217883] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 3.217885] pci_bus 0000:04: resource 1 [mem 0xd3800000-0xd47fffff]
[ 3.217887] pci_bus 0000:04: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
[ 3.217889] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 3.217890] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 3.217892] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.217894] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[ 3.217895] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[ 3.217897] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[ 3.217899] pci_bus 0000:05: resource 10 [mem 0x000d4000-0x000d7fff]
[ 3.217900] pci_bus 0000:05: resource 11 [mem 0x000d8000-0x000dbfff]
[ 3.217902] pci_bus 0000:05: resource 12 [mem 0x000dc000-0x000dffff]
[ 3.217904] pci_bus 0000:05: resource 13 [mem 0x000e0000-0x000e3fff]
[ 3.217905] pci_bus 0000:05: resource 14 [mem 0x000e4000-0x000e7fff]
[ 3.217907] pci_bus 0000:05: resource 15 [mem 0x000e8000-0x000ebfff]
[ 3.217908] pci_bus 0000:05: resource 16 [mem 0x000ec000-0x000effff]
[ 3.217910] pci_bus 0000:05: resource 17 [mem 0x000f0000-0x000fffff]
[ 3.217912] pci_bus 0000:05: resource 18 [mem 0xa0000000-0xdfffffff]
[ 3.217913] pci_bus 0000:05: resource 19 [mem 0xf0000000-0xfed3ffff]
[ 3.217915] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xfffdffff]
[ 3.217952] NET: Registered protocol family 2
[ 3.218250] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.218529] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.218789] TCP: Hash tables configured (established 65536 bind 65536)
[ 3.218826] TCP: reno registered
[ 3.218843] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.218893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.219011] NET: Registered protocol family 1
[ 3.219032] pci 0000:00:01.0: Video device with shadowed ROM
[ 3.333351] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 3.388911] Trying to unpack rootfs image as initramfs...
[ 3.903592] Freeing initrd memory: 31236K (ffff8800342ee000 - ffff88003616f000)
[ 3.903713] AMD-Vi: IOMMU performance counters supported
[ 3.903958] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 3.903961] pci 0000:00:00.2: PCI INT A: no GSI - using ISA IRQ 11
[ 3.904316] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 3.904318] AMD-Vi: Extended features: PPR GT IA PC
[ 3.904323] AMD-Vi: Interrupt remapping enabled
[ 3.904355] pci 0000:00:00.2: irq 72 for MSI/MSI-X
[ 3.905664] AMD-Vi: Using passthrough domain for device 0000:00:01.0
[ 3.919171] AMD-Vi: Using passthrough domain for device 0000:01:00.0
[ 3.920903] AMD-Vi: Lazy IO/TLB flushing enabled
[ 3.921444] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.921448] software IO TLB [mem 0x599b6000-0x5d9b6000] (64MB) mapped at [ffff8800599b6000-ffff88005d9b5fff]
[ 3.921781] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 3.921785] LVT offset 0 assigned for vector 0x400
[ 3.921811] perf: AMD IBS detected (0x000001ff)
[ 3.921868] microcode: CPU0: patch_level=0x06003106
[ 3.921906] microcode: CPU1: patch_level=0x06003106
[ 3.921921] microcode: CPU2: patch_level=0x06003106
[ 3.921933] microcode: CPU3: patch_level=0x06003106
[ 3.922025] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.922028] Scanning for low memory corruption every 60 seconds
[ 3.922431] Initialise system trusted keyring
[ 3.922482] audit: initializing netlink socket (disabled)
[ 3.922497] type=2000 audit(1427336001.584:1): initialized
[ 3.953477] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.955197] zbud: loaded
[ 3.955429] VFS: Disk quotas dquot_6.5.2
[ 3.955478] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.956137] fuse init (API version 7.22)
[ 3.956256] msgmni has been set to 13712
[ 3.956315] Key type big_key registered
[ 3.956997] Key type asymmetric registered
[ 3.957003] Asymmetric key parser 'x509' registered
[ 3.957078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.957153] io scheduler noop registered
[ 3.957155] io scheduler deadline registered (default)
[ 3.957190] io scheduler cfq registered
[ 3.957612] pcieport 0000:00:02.1: irq 73 for MSI/MSI-X
[ 3.957974] pcieport 0000:00:03.1: irq 74 for MSI/MSI-X
[ 3.958308] pcieport 0000:00:03.2: irq 75 for MSI/MSI-X
[ 3.958646] pcieport 0000:00:03.4: irq 76 for MSI/MSI-X
[ 3.958745] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
[ 3.958748] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.958752] pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
[ 3.958770] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
[ 3.958772] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.958776] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
[ 3.958795] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
[ 3.958797] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.958801] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
[ 3.958818] pcieport 0000:00:03.4: Signaling PME through PCIe PME interrupt
[ 3.958820] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 3.958823] pcie_pme 0000:00:03.4:pcie01: service driver pcie_pme loaded
[ 3.958839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.958973] pciehp 0000:00:02.1:pcie04: HPC vendor_id 1022 device_id 1425 ss_vid 1022 ss_did 1234
[ 3.959075] pciehp 0000:00:02.1:pcie04: service driver pciehp loaded
[ 3.959088] pciehp 0000:00:03.2:pcie04: HPC vendor_id 1022 device_id 1426 ss_vid 1022 ss_did 1234
[ 3.959122] pciehp 0000:00:03.2:pcie04: service driver pciehp loaded
[ 3.959133] pciehp 0000:00:03.4:pcie04: HPC vendor_id 1022 device_id 1426 ss_vid 1022 ss_did 1234
[ 3.959163] pciehp 0000:00:03.4:pcie04: service driver pciehp loaded
[ 3.959168] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.959229] ipmi message handler version 39.2
[ 3.959489] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.959855] ACPI: AC Adapter [AC] (on-line)
[ 3.959944] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 3.959948] ACPI: Sleep Button [SLPB]
[ 3.959986] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.960014] ACPI: Lid Switch [LID]
[ 3.960554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.960557] ACPI: Power Button [PWRF]
[ 3.960645] ACPI: acpi_idle registered with cpuidle
[ 4.002619] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.002624] ACPI: Thermal Zone [CPUZ] (47 C)
[ 4.042020] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.042025] ACPI: Thermal Zone [GFXZ] (0 C)
[ 4.063006] thermal LNXTHERM:02: registered as thermal_zone2
[ 4.063011] ACPI: Thermal Zone [EXTZ] (0 C)
[ 4.085211] thermal LNXTHERM:03: registered as thermal_zone3
[ 4.085216] ACPI: Thermal Zone [LOCZ] (0 C)
[ 4.107594] thermal LNXTHERM:04: registered as thermal_zone4
[ 4.107599] ACPI: Thermal Zone [BATZ] (21 C)
[ 4.107699] GHES: HEST is not enabled!
[ 4.107861] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.109904] Linux agpgart interface v0.103
[ 4.110057] tpm_tis 00:0b: 1.2 TPM (device-id 0x1A, rev-id 16)
[ 4.137380] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.137389] ACPI: Battery Slot [BAT0] (battery present)
[ 4.410842] brd: module loaded
[ 4.411976] loop: module loaded
[ 4.412566] libphy: Fixed MDIO Bus: probed
[ 4.412673] tun: Universal TUN/TAP device driver, 1.6
[ 4.412675] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.412815] PPP generic driver version 2.4.2
[ 4.412914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.412927] ehci-pci: EHCI PCI platform driver
[ 4.413264] QUIRK: Enable AMD PLL fix
[ 4.413304] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 4.413312] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.413318] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.413331] ehci-pci 0000:00:12.2: debug port 1
[ 4.413388] ehci-pci 0000:00:12.2: irq 17, io mem 0xd694d000
[ 4.424672] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.424759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.424762] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.424764] usb usb1: Product: EHCI Host Controller
[ 4.424766] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 4.424767] usb usb1: SerialNumber: 0000:00:12.2
[ 4.425055] hub 1-0:1.0: USB hub found
[ 4.425071] hub 1-0:1.0: 5 ports detected
[ 4.425731] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.425739] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.425744] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.425757] ehci-pci 0000:00:13.2: debug port 1
[ 4.425800] ehci-pci 0000:00:13.2: irq 17, io mem 0xd694b000
[ 4.436701] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.436781] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.436783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.436786] usb usb2: Product: EHCI Host Controller
[ 4.436787] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 4.436789] usb usb2: SerialNumber: 0000:00:13.2
[ 4.437070] hub 2-0:1.0: USB hub found
[ 4.437080] hub 2-0:1.0: 5 ports detected
[ 4.437316] ehci-platform: EHCI generic platform driver
[ 4.437331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.437333] ohci-pci: OHCI PCI platform driver
[ 4.437698] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 4.437706] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 4.437750] ohci-pci 0000:00:12.0: irq 18, io mem 0xd694e000
[ 4.496756] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.496761] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.496763] usb usb3: Product: OHCI PCI host controller
[ 4.496765] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 4.496767] usb usb3: SerialNumber: 0000:00:12.0
[ 4.497066] hub 3-0:1.0: USB hub found
[ 4.497082] hub 3-0:1.0: 5 ports detected
[ 4.497698] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 4.497707] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 4.497730] ohci-pci 0000:00:13.0: irq 18, io mem 0xd694c000
[ 4.556771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.556776] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.556778] usb usb4: Product: OHCI PCI host controller
[ 4.556780] usb usb4: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 4.556782] usb usb4: SerialNumber: 0000:00:13.0
[ 4.557074] hub 4-0:1.0: USB hub found
[ 4.557091] hub 4-0:1.0: 5 ports detected
[ 4.557556] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 4.557564] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 4.557589] ohci-pci 0000:00:14.5: irq 18, io mem 0xd694a000
[ 4.616755] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.616760] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.616763] usb usb5: Product: OHCI PCI host controller
[ 4.616764] usb usb5: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[ 4.616766] usb usb5: SerialNumber: 0000:00:14.5
[ 4.617065] hub 5-0:1.0: USB hub found
[ 4.617081] hub 5-0:1.0: 2 ports detected
[ 4.617293] ohci-platform: OHCI generic platform driver
[ 4.617309] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.617688] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.617696] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 4.617975] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 4.617985] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[ 4.617997] xhci_hcd 0000:00:10.0: irq 79 for MSI/MSI-X
[ 4.618006] xhci_hcd 0000:00:10.0: irq 80 for MSI/MSI-X
[ 4.618014] xhci_hcd 0000:00:10.0: irq 81 for MSI/MSI-X
[ 4.618166] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.618168] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.618170] usb usb6: Product: xHCI Host Controller
[ 4.618172] usb usb6: Manufacturer: Linux 3.13.0-45-generic xhci_hcd
[ 4.618173] usb usb6: SerialNumber: 0000:00:10.0
[ 4.618351] hub 6-0:1.0: USB hub found
[ 4.618394] hub 6-0:1.0: 2 ports detected
[ 4.618621] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.618625] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 4.621412] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.621414] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.621416] usb usb7: Product: xHCI Host Controller
[ 4.621418] usb usb7: Manufacturer: Linux 3.13.0-45-generic xhci_hcd
[ 4.621420] usb usb7: SerialNumber: 0000:00:10.0
[ 4.621573] hub 7-0:1.0: USB hub found
[ 4.621615] hub 7-0:1.0: 2 ports detected
[ 4.633110] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.635073] i8042: Detected active multiplexing controller, rev 1.1
[ 4.636076] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.636090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.636124] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.636148] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.636168] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.636414] mousedev: PS/2 mouse device common for all mice
[ 4.636737] rtc_cmos 00:06: RTC can wake from S4
[ 4.636892] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 4.636926] rtc_cmos 00:06: alarms up to one month, 114 bytes nvram, hpet irqs
[ 4.637018] device-mapper: uevent: version 1.0.3
[ 4.637120] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4.637130] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.637249] TCP: cubic registered
[ 4.637356] NET: Registered protocol family 10
[ 4.637570] NET: Registered protocol family 17
[ 4.637581] Key type dns_resolver registered
[ 4.638291] Loading compiled-in X.509 certificates
[ 4.639255] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
[ 4.639315] registered taskstats version 1
[ 4.642587] Key type trusted registered
[ 4.644890] Key type encrypted registered
[ 4.647127] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.661263] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 4.740749] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 4.920681] tsc: Refined TSC clocksource calibration: 1896.456 MHz
[ 4.958887] usb 1-5: New USB device found, idVendor=04ca, idProduct=7022
[ 4.958892] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.958894] usb 1-5: Product: HP HD Webcam
[ 4.958896] usb 1-5: Manufacturer: DDZLD01G46C6VD
[ 5.164915] usb 5-2: new full-speed USB device number 2 using ohci-pci
[ 5.301416] regulator-dummy: disabling
[ 5.301628] Magic number: 7:312:208
[ 5.301666] vc vcsa: hash matches
[ 5.301773] rtc_cmos 00:06: setting system clock to 2015-03-26 02:13:24 UTC (1427336004)
[ 5.302010] acpi-cpufreq: overriding BIOS provided _PSD data
[ 5.302381] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.302383] EDD information not available.
[ 5.302429] PM: Hibernation image not present or could not be loaded.
[ 5.303793] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 5.303796] Write protecting the kernel read-only data: 12288k
[ 5.307400] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
[ 5.310568] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 5.330890] systemd-udevd[120]: starting version 204
[ 5.333939] usb 5-2: New USB device found, idVendor=138a, idProduct=003f
[ 5.333945] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.333948] usb 5-2: SerialNumber: 00b0245f4c92
[ 5.350932] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.362327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.362343] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.364740] ahci 0000:00:11.0: version 3.0
[ 5.382556] rtsx_pci 0000:04:00.0: irq 82 for MSI/MSI-X
[ 5.382588] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 82
[ 5.384471] ahci 0000:00:11.0: irq 83 for MSI/MSI-X
[ 5.384483] ahci 0000:00:11.0: irq 84 for MSI/MSI-X
[ 5.384492] ahci 0000:00:11.0: irq 85 for MSI/MSI-X
[ 5.384500] ahci 0000:00:11.0: irq 86 for MSI/MSI-X
[ 5.384508] ahci 0000:00:11.0: irq 87 for MSI/MSI-X
[ 5.384516] ahci 0000:00:11.0: irq 88 for MSI/MSI-X
[ 5.384523] ahci 0000:00:11.0: irq 89 for MSI/MSI-X
[ 5.384581] ahci 0000:00:11.0: irq 90 for MSI/MSI-X
[ 5.384665] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.384671] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 5.386691] wmi: Mapper loaded
[ 5.389019] r8169 0000:02:00.0: irq 91 for MSI/MSI-X
[ 5.389259] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000d82000, a0:2b:b8:33:f8:73, XID 10900800 IRQ 91
[ 5.389264] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.390055] scsi0 : ahci
[ 5.390217] scsi1 : ahci
[ 5.390312] ata1: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f100 irq 83
[ 5.390317] ata2: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f180 irq 84
[ 5.413916] acpi device:01: registered as cooling_device4
[ 5.414078] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 5.415565] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 5.417327] acpi device:0b: registered as cooling_device5
[ 5.417475] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input12
[ 5.881505] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.881536] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.884826] ata1.00: ATA-9: HGST HTS541010A9E680, JA0OA710, max UDMA/133
[ 5.884832] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.886380] ata2.00: ATAPI: hp DVDRW SU208FB, HH01, max UDMA/100
[ 5.886737] ata1.00: configured for UDMA/133
[ 5.886919] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
[ 5.887165] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.887186] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.887189] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.887336] sd 0:0:0:0: [sda] Write Protect is off
[ 5.887340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.887394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.889189] ata2.00: configured for UDMA/100
[ 5.897466] scsi 1:0:0:0: CD-ROM hp DVDRW SU208FB HH01 PQ: 0 ANSI: 5
[ 5.908816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.908823] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.909057] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.909180] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.922094] Switched to clocksource tsc
[ 5.967577] sda: sda1 sda2 sda3
[ 5.968354] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.232351] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2653, fw id: 1481159
[ 6.272050] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
[ 8.004756] raid6: sse2x1 5891 MB/s
[ 8.072758] raid6: sse2x2 8250 MB/s
[ 8.140768] raid6: sse2x4 9447 MB/s
[ 8.140770] raid6: using algorithm sse2x4 (9447 MB/s)
[ 8.140771] raid6: using ssse3x2 recovery algorithm
[ 8.142436] xor: automatically using best checksumming function:
[ 8.180873] avx : 8733.000 MB/sec
[ 8.194646] bio: create slab <bio-1> at 1
[ 8.195049] Btrfs loaded
[ 8.252847] random: nonblocking pool is initialized
[ 8.587973] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 18.861643] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 18.913009] Adding 7282684k swap on /dev/sda3. Priority:-1 extents:1 across:7282684k FS
[ 19.071730] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.215239] systemd-udevd[390]: starting version 204
[ 19.608140] lp: driver loaded but no devices found
[ 19.627265] ppdev: user-space parallel port driver
[ 19.627862] Initializing HPQ6001 module
[ 19.627985] input: HP Wireless hotkeys as /devices/virtual/input/input14
[ 19.643350] hp_accel: laptop model unknown, using default axes configuration
[ 19.680011] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 19.687318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.690260] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 19.690266] Disabling lock debugging due to kernel taint
[ 19.728330] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBO 1 (20131115/utaddress-251)
[ 19.728340] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.768562] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[ 19.773139] lis3lv02d: 8 bits 3DC sensor found
[ 19.776807] cfg80211: Calling CRDA to update world regulatory domain
[ 19.797615] <6>[fglrx] Maximum main memory to use for locked dma buffers: 6645 MBytes.
[ 19.797828] <6>[fglrx] vendor: 1002 device: 130a count: 1
[ 19.798035] MCE: In-kernel MCE decoding enabled.
[ 19.798729] <6>[fglrx] vendor: 1002 device: 6901 count: 2
[ 19.798909] <6>[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
[ 19.798912] <6>[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
[ 19.801933] EDAC MC: Ver: 3.0.0
[ 19.807269] AMD64 EDAC driver v3.4.0
[ 19.807328] EDAC amd64: DRAM ECC disabled.
[ 19.807339] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 19.807339] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 19.807339] (Note that use of the override may cause unknown side effects.)
[ 19.808563] <6>[fglrx] ioport: bar 4, base 0x6000, size: 0x100
[ 19.810011] <6>[fglrx] ioport: bar 4, base 0x5000, size: 0x100
[ 19.810324] <6>[fglrx] Kernel PAT support is enabled
[ 19.810371] <6>[fglrx] module loaded - fglrx 14.30.4 [Feb 27 2015] with 2 minors
[ 19.828188] snd_hda_intel 0000:00:01.1: Probing card using HDA DKMS, version 0.201503121632~ubuntu14.04.1
[ 19.828971] snd_hda_intel 0000:00:01.1: irq 92 for MSI/MSI-X
[ 19.829085] snd_hda_intel 0000:00:14.2: Probing card using HDA DKMS, version 0.201503121632~ubuntu14.04.1
[ 19.845203] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
[ 19.856058] sound hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 19.856072] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.856076] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 19.856080] sound hdaudioC1D0: mono: mono_out=0x0
[ 19.856083] sound hdaudioC1D0: inputs:
[ 19.856087] sound hdaudioC1D0: Mic=0x19
[ 19.856090] sound hdaudioC1D0: Internal Mic=0x12
[ 19.868511] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[ 19.879618] ath: phy0: Enable LNA combining
[ 19.880803] ath: EEPROM regdomain: 0x60
[ 19.880806] ath: EEPROM indicates we should expect a direct regpair map
[ 19.880810] ath: Country alpha2 being used: 00
[ 19.880812] ath: Regpair used: 0x60
[ 19.892797] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.893013] device-mapper: multipath: version 1.6.0 loaded
[ 19.893403] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90011f00000, irq=36
[ 19.936777] kvm: Nested Virtualization enabled
[ 19.936783] kvm: Nested Paging enabled
[ 19.954827] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 19.956095] serio_raw serio3: raw access enabled on isa0060/serio3 (serio_raw0, minor 57)
[ 20.124406] Bluetooth: Core ver 2.17
[ 20.124431] NET: Registered protocol family 31
[ 20.124434] Bluetooth: HCI device and connection manager initialized
[ 20.124445] Bluetooth: HCI socket layer initialized
[ 20.124448] Bluetooth: L2CAP socket layer initialized
[ 20.124453] Bluetooth: SCO socket layer initialized
[ 20.129080] Bluetooth: RFCOMM TTY layer initialized
[ 20.129096] Bluetooth: RFCOMM socket layer initialized
[ 20.129104] Bluetooth: RFCOMM ver 1.11
[ 20.130702] type=1400 audit(1427336019.324:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
[ 20.130711] type=1400 audit(1427336019.324:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
[ 20.130718] type=1400 audit(1427336019.324:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
[ 20.131283] type=1400 audit(1427336019.324:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
[ 20.131292] type=1400 audit(1427336019.324:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
[ 20.131393] type=1400 audit(1427336019.324:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=586 comm="apparmor_parser"
[ 20.131404] type=1400 audit(1427336019.324:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=586 comm="apparmor_parser"
[ 20.131569] type=1400 audit(1427336019.324:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
[ 20.131598] type=1400 audit(1427336019.324:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=727 comm="apparmor_parser"
[ 20.131605] type=1400 audit(1427336019.324:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=727 comm="apparmor_parser"
[ 20.214199] input: HP WMI hotkeys as /devices/virtual/input/input18
[ 20.357194] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.357201] Bluetooth: BNEP filters: protocol multicast
[ 20.357214] Bluetooth: BNEP socket layer initialized
[ 20.386096] init: failsafe main process (749) killed by TERM signal
[ 20.484775] init: cups main process (729) killed by HUP signal
[ 20.484793] init: cups main process ended, respawning
[ 20.681703] cfg80211: World regulatory domain updated:
[ 20.681709] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.681712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.681714] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.681716] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.681718] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.681719] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.336724] Linux video capture interface: v2.00
[ 21.343710] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7022)
[ 21.352224] input: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input19
[ 21.352314] usbcore: registered new interface driver uvcvideo
[ 21.352315] USB Video Class driver (1.1.1)
[ 21.598069] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input20
[ 21.924076] r8169 0000:02:00.0 eth0: link down
[ 21.924176] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.924702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.934849] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
[ 21.942180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.945851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.276988] thinkpad_ec: no ThinkPad embedded controller!
[ 23.110635] wlan0: authenticate with 3c:ce:73:48:04:80
[ 23.128143] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
[ 24.142159] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
[ 24.549478] fglrx_pci 0000:00:01.0: irq 93 for MSI/MSI-X
[ 24.550294] <6>[fglrx] Firegl kernel thread PID: 1377
[ 24.550423] <6>[fglrx] Firegl kernel thread PID: 1378
[ 24.550505] <6>[fglrx] Firegl kernel thread PID: 1379
[ 24.550622] <6>[fglrx] IRQ 93 Enabled
[ 24.556703] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 24.556707] <6>[fglrx] Reserved FB block: Unshared offset:fa38000, size:4000
[ 24.556708] <6>[fglrx] Reserved FB block: Unshared offset:fa3c000, size:4c4000
[ 24.556710] <6>[fglrx] Reserved FB block: Unshared offset:ff00000, size:100000
[ 24.556711] <6>[fglrx] Reserved FB block: Unshared offset:3ffd7000, size:29000
[ 24.583673] vgaarb: this pci device is not a vga device
[ 24.799197] fglrx_pci 0000:01:00.0: irq 94 for MSI/MSI-X
[ 24.799981] <6>[fglrx] Firegl kernel thread PID: 1382
[ 24.800134] <6>[fglrx] Firegl kernel thread PID: 1383
[ 24.800240] <6>[fglrx] Firegl kernel thread PID: 1384
[ 24.800366] <6>[fglrx] IRQ 94 Enabled
[ 24.814629] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 24.814634] <6>[fglrx] Reserved FB block: Unshared offset:f7fa000, size:1000
[ 24.814636] <6>[fglrx] Reserved FB block: Unshared offset:f7fb000, size:4000
[ 24.814637] <6>[fglrx] Reserved FB block: Unshared offset:f7ff000, size:501000
[ 24.814639] <6>[fglrx] Reserved FB block: Unshared offset:3ff5e000, size:a2000
[ 24.845659] <6>[fglrx] ATIF platform detected with notification ID: 0xd0
[ 24.848799] <6>[fglrx] ATIF platform detected with notification ID: 0xd0
[ 25.082126] vgaarb: this pci device is not a vga device
[ 25.133458] wlan0: authenticated
[ 25.146376] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
[ 26.130537] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
[ 26.794642] init: plymouth-upstart-bridge main process ended, respawning
[ 27.149671] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
[ 27.149824] wlan0: associated
[ 27.149841] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.149969] cfg80211: Calling CRDA for country: TW
[ 27.150099] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
[ 27.153547] ath: EEPROM regdomain: 0x809e
[ 27.153554] ath: EEPROM indicates we should expect a country code
[ 27.153556] ath: doing EEPROM country->regdmn map search
[ 27.153558] ath: country maps to regdmn code: 0x50
[ 27.153559] ath: Country alpha2 being used: TW
[ 27.153560] ath: Regpair used: 0x50
[ 27.153562] ath: regdomain 0x809e dynamically updated by country IE
[ 27.153581] cfg80211: Regulatory domain changed to country: TW
[ 27.153583] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.153584] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 27.153586] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 27.153588] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 27.158961] cfg80211: Calling CRDA to update world regulatory domain
[ 27.165685] cfg80211: World regulatory domain updated:
[ 27.165692] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.165699] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.165701] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.165704] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.165706] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.165708] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.304710] wlan0: authenticate with 3c:ce:73:48:04:80
[ 31.321349] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
[ 32.130956] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
[ 32.326073] wlan0: authenticated
[ 32.339865] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
[ 33.143085] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
[ 34.119143] wlan0: associate with 3c:ce:73:48:04:80 (try 3/3)
[ 34.342402] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
[ 34.342565] wlan0: associated
[ 34.342778] cfg80211: Calling CRDA for country: TW
[ 34.342809] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
[ 34.348160] ath: EEPROM regdomain: 0x809e
[ 34.348167] ath: EEPROM indicates we should expect a country code
[ 34.348169] ath: doing EEPROM country->regdmn map search
[ 34.348171] ath: country maps to regdmn code: 0x50
[ 34.348173] ath: Country alpha2 being used: TW
[ 34.348175] ath: Regpair used: 0x50
[ 34.348177] ath: regdomain 0x809e dynamically updated by country IE
[ 34.348198] cfg80211: Regulatory domain changed to country: TW
[ 34.348200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 34.348202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 34.348205] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 34.348206] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 34.355440] cfg80211: Calling CRDA to update world regulatory domain
[ 34.356156] wlan0: authenticate with 3c:ce:73:48:04:80
[ 34.366285] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
[ 34.366462] cfg80211: World regulatory domain updated:
[ 34.366466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 34.366468] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.366471] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.366473] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 34.366475] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.366477] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 35.155055] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
[ 36.119366] wlan0: send auth to 3c:ce:73:48:04:80 (try 3/3)
[ 36.370298] wlan0: authenticated
[ 36.383351] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
[ 37.155284] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
[ 38.119556] wlan0: associate with 3c:ce:73:48:04:80 (try 3/3)
[ 38.386778] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
[ 38.386939] wlan0: associated
[ 38.387061] cfg80211: Calling CRDA for country: TW
[ 38.387213] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
[ 38.392236] ath: EEPROM regdomain: 0x809e
[ 38.392243] ath: EEPROM indicates we should expect a country code
[ 38.392245] ath: doing EEPROM country->regdmn map search
[ 38.392247] ath: country maps to regdmn code: 0x50
[ 38.392249] ath: Country alpha2 being used: TW
[ 38.392251] ath: Regpair used: 0x50
[ 38.392253] ath: regdomain 0x809e dynamically updated by country IE
[ 38.392274] cfg80211: Regulatory domain changed to country: TW
[ 38.392276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 38.392278] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 38.392280] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 38.392282] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 38.404049] cfg80211: Calling CRDA to update world regulatory domain
[ 38.411033] cfg80211: World regulatory domain updated:
[ 38.411039] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 38.411041] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 38.411043] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 38.411045] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 38.411047] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 38.411049] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 39.539948] systemd-hostnamed[1844]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23Qn93z4pE6RtURgoiBADpgCWZ6gfpMPn3akfJibudRi+Qg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2015-03-26 12:05 ` Joerg Roedel
[not found] ` <20150326120547.GU4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: Joerg Roedel @ 2015-03-26 12:05 UTC (permalink / raw)
To: AceLan Kao; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
The parameter is just called 'amd_iommu_dump'. But your dmesg contains
the needed information from that parameter. Can you please try the same
again with a recent upstream kernel and without any proprietary module
loaded (means no fglrx)?
Joerg
On Thu, Mar 26, 2015 at 10:26:53AM +0800, AceLan Kao wrote:
> Hi Joerg,
>
> Here you are.
> I've tried to add iommu_dump, amd_iommu_dump, and amd_iommu_dump=true
> on kernel command line,
> but didn't find anything useful.
> The attached log uses "amd_iommu_dump=true"
>
> Best regards,
> AceLan Kao.
>
> 2015-03-25 22:04 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> > On Wed, Mar 25, 2015 at 11:30:20AM +0800, AceLan Kao wrote:
> >> We have some AMD machines(AMD cpu and graphics) that need to set
> >> amd_iommu=off to work.
> >> Some of them have wifi issue that it can't connect to any AP(no
> >> interrupt)(can set noapic to workaround it, too),
> >> and some of them have graphics issues.
> >> The only workaround we found is to set amd_iommu=off, and it fixes both issues.
> >>
> >> I have 2 questions.
> >> 1. What kind of these issues would be, are they a driver issue or a
> >> BIOS issue? If it's a BIOS issue, what we should tell the BIOS
> >> engineers, so that they know how to fix it?
> >> 2. Some of the machines may not have the chance to get a BIOS update,
> >> do you think it's okay to add a quirk in amd_iommu driver to blacklist
> >> out those machines? Are there any side effects if we do so?
> >
> > Hard to tell what the issue is. Can you please boot the affected machine
> > with AMD IOMMU enabled and amd_iommu_dump on the command line and send
> > me dmesg of the machine after boot?
> >
> > Thanks,
> >
> > Joerg
> >
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump=true quiet splash
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005d9b5fff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000005d9b6000-0x000000005e8b1fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x000000005e8b2000-0x000000005efb1fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000005efb2000-0x000000005effefff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x000000005efff000-0x000000005effffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: Hewlett-Packard HP ProBook 445G2/2234, BIOS M75 Ver. 01.07 09/16/2014
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-DFFFF write-through
> [ 0.000000] E0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
> [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
> [ 0.000000] 2 base 0000FF800000 mask FFFFFF800000 write-protect
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] TOM2: 000000025f000000 aka 9712M
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820: last_pfn = 0x5f000 max_arch_pfn = 0x400000000
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
> [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
> [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x25ee00000-0x25effffff]
> [ 0.000000] [mem 0x25ee00000-0x25effffff] page 2M
> [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25edfffff]
> [ 0.000000] [mem 0x25c000000-0x25edfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
> [ 0.000000] [mem 0x200000000-0x23fffffff] page 1G
> [ 0.000000] [mem 0x240000000-0x25bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x5d9b5fff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x5d7fffff] page 2M
> [ 0.000000] [mem 0x5d800000-0x5d9b5fff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x5efff000-0x5effffff]
> [ 0.000000] [mem 0x5efff000-0x5effffff] page 4k
> [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
> [ 0.000000] RAMDISK: [mem 0x342ee000-0x3616efff]
> [ 0.000000] ACPI: RSDP 00000000000f2f90 000024 (v02 HPQOEM)
> [ 0.000000] ACPI: XSDT 000000005effd0e8 00009C (v01 HPQOEM SLIC-MPC 00000003 01000013)
> [ 0.000000] ACPI: FACP 000000005effb000 00010C (v05 HPQOEM 180F 00000003 HP 00000001)
> [ 0.000000] ACPI: DSDT 000000005efd8000 01E7AD (v01 HPQOEM 180F 00000001 INTL 20130927)
> [ 0.000000] ACPI: FACS 000000005ed69000 000040
> [ 0.000000] ACPI: HPET 000000005effa000 000038 (v01 HPQOEM 180F 00000001 HP 00000001)
> [ 0.000000] ACPI: APIC 000000005eff9000 000090 (v01 HPQOEM 180F 00000001 HP 00000001)
> [ 0.000000] ACPI: MCFG 000000005eff8000 00003C (v01 HPQOEM 180F 00000001 HP 00000001)
> [ 0.000000] ACPI: TCPA 000000005eff7000 000032 (v02 HPQOEM 180F 00000000 HP 00000001)
> [ 0.000000] ACPI: FPDT 000000005efd5000 000044 (v01 HPQOEM 180F 00000001 HP 00000001)
> [ 0.000000] ACPI: BGRT 000000005efd4000 000038 (v00 HPQOEM 180F 00000001 HP 00000001)
> [ 0.000000] ACPI: SSDT 000000005efd3000 000B9C (v01 AMD BALLINA 00000001 AMD 00000001)
> [ 0.000000] ACPI: SSDT 000000005efc9000 009399 (v02 AMD BALLINA 00000002 MSFT 04000000)
> [ 0.000000] ACPI: IVRS 000000005efc8000 000078 (v02 AMD BALLINA 00000001 AMD 00000000)
> [ 0.000000] ACPI: CRAT 000000005efc7000 000550 (v01 AMD BALLINA 00000001 AMD 00000001)
> [ 0.000000] ACPI: SSDT 000000005efc6000 000789 (v01 HP AMDSGTBL 00000001 INTL 20130927)
> [ 0.000000] ACPI: SSDT 000000005efc5000 000325 (v01 HP HPZPODDT 00000001 INTL 20130927)
> [ 0.000000] ACPI: SSDT 000000005efc4000 00081B (v01 AMD CPMADPS4 00000001 INTL 20130927)
> [ 0.000000] ACPI: SSDT 000000005efc2000 001207 (v01 AMD CPMCMN 00000001 INTL 20130927)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25effffff]
> [ 0.000000] NODE_DATA [mem 0x25eff9000-0x25effdfff]
> [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257600000-ffff88025e5fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x25effffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> [ 0.000000] node 0: [mem 0x00100000-0x5d9b5fff]
> [ 0.000000] node 0: [mem 0x5efff000-0x5effffff]
> [ 0.000000] node 0: [mem 0x100000000-0x25effffff]
> [ 0.000000] On node 0 totalpages: 1821012
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 5927 pages used for memmap
> [ 0.000000] DMA32 zone: 379319 pages, LIFO batch:31
> [ 0.000000] Normal zone: 22464 pages used for memmap
> [ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
> [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 72
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x5d9b6000-0x5e8b1fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x5e8b2000-0x5efb1fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x5efb2000-0x5effefff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
> [ 0.000000] e820: [mem 0x5f000000-0xdfffffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025ec00000 s82368 r8192 d24128 u524288
> [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1792536
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump=true quiet splash
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Node 0: aperture @ 0 size 32 MB
> [ 0.000000] Your BIOS doesn't leave a aperture memory hole
> [ 0.000000] Please enable the IOMMU option in the BIOS setup
> [ 0.000000] This costs you 64 MB of RAM
> [ 0.000000] Mapping aperture over 65536 KB of RAM @ 54000000
> [ 0.000000] PM: Registered nosave memory: [mem 0x54000000-0x57ffffff]
> [ 0.000000] Memory: 6989436K/7284048K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 294612K reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
> [ 0.000000] Offload RCU callbacks from all CPUs
> [ 0.000000] Offload RCU callbacks from CPUs: 0-3.
> [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
> [ 0.000000] spurious 8259A interrupt: IRQ7.
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 29360128 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.004000] tsc: Detected 1896.472 MHz processor
> [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3792.94 BogoMIPS (lpj=7585888)
> [ 0.000007] pid_max: default: 32768 minimum: 301
> [ 0.000040] Security Framework initialized
> [ 0.000064] AppArmor: AppArmor initialized
> [ 0.000065] Yama: becoming mindful.
> [ 0.000688] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [ 0.003568] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.004849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.004863] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.005153] Initializing cgroup subsys memory
> [ 0.005163] Initializing cgroup subsys devices
> [ 0.005165] Initializing cgroup subsys freezer
> [ 0.005168] Initializing cgroup subsys blkio
> [ 0.005169] Initializing cgroup subsys perf_event
> [ 0.005172] Initializing cgroup subsys hugetlb
> [ 0.005199] tseg: 005f000000
> [ 0.005201] CPU: Physical Processor ID: 0
> [ 0.005203] CPU: Processor Core ID: 0
> [ 0.005205] mce: CPU supports 7 MCE banks
> [ 0.005212] LVT offset 1 assigned for vector 0xf9
> [ 0.005221] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
> [ 0.005221] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
> [ 0.005221] tlb_flushall_shift: 5
> [ 0.005347] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
> [ 0.006447] ACPI: Core revision 20131115
> [ 0.017553] ACPI: All ACPI Tables successfully acquired
> [ 0.056583] ftrace: allocating 28554 entries in 112 pages
> [ 0.072165] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
> [ 0.072169] AMD-Vi: mmio-addr: 00000000feb80000
> [ 0.072213] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
> [ 0.072214] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
> [ 0.073260] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
> [ 0.073262] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
> [ 0.073272] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
> [ 0.073274] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
> [ 0.073276] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
> [ 0.271580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.311273] smpboot: CPU0: AMD A10-7300 Radeon R6, 10 Compute Cores 4C+6G (fam: 15, model: 30, stepping: 01)
> [ 0.415445] Performance Events: Fam15h core perfctr, AMD PMU driver.
> [ 0.415452] ... version: 0
> [ 0.415454] ... bit width: 48
> [ 0.415456] ... generic registers: 6
> [ 0.415457] ... value mask: 0000ffffffffffff
> [ 0.415459] ... max period: 00007fffffffffff
> [ 0.415460] ... fixed-purpose events: 0
> [ 0.415461] ... event mask: 000000000000003f
> [ 0.417469] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [ 0.417572] x86: Booting SMP configuration:
> [ 0.417575] .... node #0, CPUs: #1 #2 #3
> [ 0.457291] x86: Booted up 1 node, 4 CPUs
> [ 0.457296] smpboot: Total of 4 processors activated (15171.77 BogoMIPS)
> [ 0.458465] devtmpfs: initialized
> [ 0.461887] EVM: security.selinux
> [ 0.461889] EVM: security.SMACK64
> [ 0.461891] EVM: security.ima
> [ 0.461893] EVM: security.capability
> [ 0.462005] PM: Registering ACPI NVS region [mem 0x5e8b2000-0x5efb1fff] (7340032 bytes)
> [ 0.463313] pinctrl core: initialized pinctrl subsystem
> [ 0.463397] regulator-dummy: no parameters
> [ 0.463495] RTC time: 2:13:19, date: 03/26/15
> [ 0.463544] NET: Registered protocol family 16
> [ 0.463711] cpuidle: using governor ladder
> [ 0.463713] cpuidle: using governor menu
> [ 0.463926] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.463928] ACPI: bus type PCI registered
> [ 0.463930] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.464081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.464084] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [ 0.480530] PCI: Using configuration type 1 for base access
> [ 0.480781] mtrr: your CPUs had inconsistent fixed MTRR settings
> [ 0.480783] mtrr: your CPUs had inconsistent variable MTRR settings
> [ 0.480784] mtrr: probably your BIOS does not setup all CPUs.
> [ 0.480785] mtrr: corrected configuration.
> [ 0.482074] bio: create slab <bio-0> at 0
> [ 0.482299] ACPI: Added _OSI(Module Device)
> [ 0.482301] ACPI: Added _OSI(Processor Device)
> [ 0.482303] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.482304] ACPI: Added _OSI(Processor Aggregator Device)
> [ 3.128232] ACPI: Interpreter enabled
> [ 3.128255] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
> [ 3.128263] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
> [ 3.128291] ACPI: (supports S0 S3 S4 S5)
> [ 3.128294] ACPI: Using IOAPIC for interrupt routing
> [ 3.128639] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 3.128952] ACPI: No dock devices found.
> [ 3.134669] ACPI: Power Resource [APPR] (off)
> [ 3.146814] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 3.147339] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 3.147349] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 3.147860] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
> [ 3.148084] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf5ff])
> [ 3.148088] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
> [ 3.148407] PCI host bridge to bus 0000:00
> [ 3.148412] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 3.148414] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 3.148416] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 3.148418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 3.148419] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
> [ 3.148421] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
> [ 3.148423] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
> [ 3.148424] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
> [ 3.148426] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
> [ 3.148428] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
> [ 3.148429] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
> [ 3.148431] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
> [ 3.148432] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
> [ 3.148434] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
> [ 3.148435] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
> [ 3.148437] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff]
> [ 3.148439] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff]
> [ 3.148440] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfffdffff]
> [ 3.148448] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
> [ 3.148580] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
> [ 3.148737] pci 0000:00:01.0: [1002:130a] type 00 class 0x030000
> [ 3.148751] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
> [ 3.148761] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
> [ 3.148767] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff]
> [ 3.148774] pci 0000:00:01.0: reg 0x24: [mem 0xd6900000-0xd693ffff]
> [ 3.148781] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
> [ 3.148815] pci 0000:00:01.0: supports D1 D2
> [ 3.148817] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
> [ 3.148905] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
> [ 3.148917] pci 0000:00:01.1: reg 0x10: [mem 0xd6940000-0xd6943fff 64bit]
> [ 3.148975] pci 0000:00:01.1: supports D1 D2
> [ 3.149111] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
> [ 3.149199] pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
> [ 3.149268] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
> [ 3.149421] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
> [ 3.149518] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
> [ 3.149587] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
> [ 3.149650] pci 0000:00:03.1: System wakeup disabled by ACPI
> [ 3.149683] pci 0000:00:03.2: [1022:1426] type 01 class 0x060400
> [ 3.149751] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
> [ 3.149809] pci 0000:00:03.2: System wakeup disabled by ACPI
> [ 3.149912] pci 0000:00:03.4: [1022:1426] type 01 class 0x060400
> [ 3.149980] pci 0000:00:03.4: PME# supported from D0 D3hot D3cold
> [ 3.150039] pci 0000:00:03.4: System wakeup disabled by ACPI
> [ 3.150132] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
> [ 3.150283] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
> [ 3.150307] pci 0000:00:10.0: reg 0x10: [mem 0xd6948000-0xd6949fff 64bit]
> [ 3.150417] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
> [ 3.150481] pci 0000:00:10.0: System wakeup disabled by ACPI
> [ 3.150555] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
> [ 3.150575] pci 0000:00:11.0: reg 0x10: [io 0x6118-0x611f]
> [ 3.150585] pci 0000:00:11.0: reg 0x14: [io 0x6124-0x6127]
> [ 3.150595] pci 0000:00:11.0: reg 0x18: [io 0x6110-0x6117]
> [ 3.150605] pci 0000:00:11.0: reg 0x1c: [io 0x6120-0x6123]
> [ 3.150615] pci 0000:00:11.0: reg 0x20: [io 0x6100-0x610f]
> [ 3.150626] pci 0000:00:11.0: reg 0x24: [mem 0xd694f000-0xd694f7ff]
> [ 3.150775] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
> [ 3.150789] pci 0000:00:12.0: reg 0x10: [mem 0xd694e000-0xd694efff]
> [ 3.150993] pci 0000:00:12.0: System wakeup disabled by ACPI
> [ 3.151076] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
> [ 3.151098] pci 0000:00:12.2: reg 0x10: [mem 0xd694d000-0xd694d0ff]
> [ 3.151188] pci 0000:00:12.2: supports D1 D2
> [ 3.151190] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 3.151255] pci 0000:00:12.2: System wakeup disabled by ACPI
> [ 3.151327] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
> [ 3.151344] pci 0000:00:13.0: reg 0x10: [mem 0xd694c000-0xd694cfff]
> [ 3.151504] pci 0000:00:13.0: System wakeup disabled by ACPI
> [ 3.151547] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
> [ 3.151568] pci 0000:00:13.2: reg 0x10: [mem 0xd694b000-0xd694b0ff]
> [ 3.151657] pci 0000:00:13.2: supports D1 D2
> [ 3.151658] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 3.151720] pci 0000:00:13.2: System wakeup disabled by ACPI
> [ 3.151791] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
> [ 3.151976] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
> [ 3.152001] pci 0000:00:14.2: reg 0x10: [mem 0xd6944000-0xd6947fff 64bit]
> [ 3.152072] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> [ 3.152147] pci 0000:00:14.2: System wakeup disabled by ACPI
> [ 3.152217] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
> [ 3.152387] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
> [ 3.152516] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
> [ 3.152531] pci 0000:00:14.5: reg 0x10: [mem 0xd694a000-0xd694afff]
> [ 3.152688] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
> [ 3.152763] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
> [ 3.152831] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
> [ 3.152903] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
> [ 3.152977] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
> [ 3.153046] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
> [ 3.153281] pci 0000:01:00.0: [1002:6901] type 00 class 0x038000
> [ 3.153313] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
> [ 3.153337] pci 0000:01:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref]
> [ 3.153353] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff]
> [ 3.153369] pci 0000:01:00.0: reg 0x24: [mem 0xd6800000-0xd683ffff]
> [ 3.153385] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
> [ 3.153482] pci 0000:01:00.0: supports D1 D2
> [ 3.161530] pci 0000:00:02.1: PCI bridge to [bus 01]
> [ 3.161540] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
> [ 3.161545] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
> [ 3.161550] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
> [ 3.161711] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
> [ 3.161744] pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
> [ 3.161780] pci 0000:02:00.0: reg 0x18: [mem 0xd5804000-0xd5804fff 64bit]
> [ 3.161801] pci 0000:02:00.0: reg 0x20: [mem 0xd5800000-0xd5803fff 64bit]
> [ 3.161887] pci 0000:02:00.0: supports D1 D2
> [ 3.161889] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 3.161950] pci 0000:02:00.0: System wakeup disabled by ACPI
> [ 3.168361] pci 0000:00:03.1: PCI bridge to [bus 02]
> [ 3.168372] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
> [ 3.168377] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
> [ 3.168383] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
> [ 3.168530] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
> [ 3.168556] pci 0000:03:00.0: reg 0x10: [mem 0xd4800000-0xd487ffff 64bit]
> [ 3.168606] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
> [ 3.168662] pci 0000:03:00.0: supports D1 D2
> [ 3.168664] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 3.177599] pci 0000:00:03.2: PCI bridge to [bus 03]
> [ 3.177610] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
> [ 3.177614] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
> [ 3.177620] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
> [ 3.177754] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
> [ 3.177779] pci 0000:04:00.0: reg 0x10: [mem 0xd3800000-0xd3800fff]
> [ 3.177906] pci 0000:04:00.0: supports D1 D2
> [ 3.177908] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
> [ 3.184347] pci 0000:00:03.4: PCI bridge to [bus 04]
> [ 3.184358] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
> [ 3.184363] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
> [ 3.184369] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
> [ 3.184540] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
> [ 3.184551] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 3.184554] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 3.184556] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 3.184558] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
> [ 3.184560] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
> [ 3.184562] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
> [ 3.184564] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
> [ 3.184566] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
> [ 3.184568] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
> [ 3.184570] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
> [ 3.184572] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
> [ 3.184573] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
> [ 3.184575] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
> [ 3.184577] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
> [ 3.184579] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xdfffffff] (subtractive decode)
> [ 3.184581] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed3ffff] (subtractive decode)
> [ 3.184583] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xfffdffff] (subtractive decode)
> [ 3.184627] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
> [ 3.185979] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.186077] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.186174] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.186270] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.186346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.186407] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.186467] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.186527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
> [ 3.187408] ACPI: Enabled 2 GPEs in block 00 to 1F
> [ 3.187419] ACPI: \_SB_.PCI0: notify handler is installed
> [ 3.187533] Found 1 acpi root devices
> [ 3.187608] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
> [ 3.187767] vgaarb: setting as boot device: PCI:0000:00:01.0
> [ 3.187770] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
> [ 3.187781] vgaarb: loaded
> [ 3.187783] vgaarb: bridge control possible 0000:00:01.0
> [ 3.188000] SCSI subsystem initialized
> [ 3.188135] libata version 3.00 loaded.
> [ 3.188180] ACPI: bus type USB registered
> [ 3.188204] usbcore: registered new interface driver usbfs
> [ 3.188215] usbcore: registered new interface driver hub
> [ 3.188252] usbcore: registered new device driver usb
> [ 3.188466] PCI: Using ACPI for IRQ routing
> [ 3.197688] PCI: pci_cache_line_size set to 64 bytes
> [ 3.197791] Expanded resource reserved due to conflict with PCI Bus 0000:00
> [ 3.197794] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
> [ 3.197797] e820: reserve RAM buffer [mem 0x5d9b6000-0x5fffffff]
> [ 3.197798] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
> [ 3.197800] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
> [ 3.197927] NetLabel: Initializing
> [ 3.197930] NetLabel: domain hash size = 128
> [ 3.197931] NetLabel: protocols = UNLABELED CIPSOv4
> [ 3.197946] NetLabel: unlabeled traffic allowed by default
> [ 3.198213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 3.198218] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
> [ 3.200349] Switched to clocksource hpet
> [ 3.207979] AppArmor: AppArmor Filesystem Enabled
> [ 3.208013] pnp: PnP ACPI init
> [ 3.208029] ACPI: bus type PNP registered
> [ 3.208173] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
> [ 3.208176] system 00:00: [mem 0xfeb00000-0xfeb00fff] has been reserved
> [ 3.208178] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 3.208181] system 00:00: [mem 0xfec20000-0xfec20fff] could not be reserved
> [ 3.208183] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 3.208187] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 3.208434] pnp 00:01: [dma 4]
> [ 3.208458] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 3.208533] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 3.208560] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 3.208660] system 00:04: [io 0x0400-0x04cf] could not be reserved
> [ 3.208662] system 00:04: [io 0x04d0-0x04d1] has been reserved
> [ 3.208664] system 00:04: [io 0x04d6] has been reserved
> [ 3.208666] system 00:04: [io 0x0680-0x06ff] has been reserved
> [ 3.208668] system 00:04: [io 0x077a] has been reserved
> [ 3.208670] system 00:04: [io 0x0c00-0x0c01] has been reserved
> [ 3.208672] system 00:04: [io 0x0c14] has been reserved
> [ 3.208674] system 00:04: [io 0x0c50-0x0c52] has been reserved
> [ 3.208675] system 00:04: [io 0x0c6c] has been reserved
> [ 3.208677] system 00:04: [io 0x0c6f] has been reserved
> [ 3.208679] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
> [ 3.208681] system 00:04: [io 0x0220-0x0227] has been reserved
> [ 3.208683] system 00:04: [io 0x0260-0x0273] has been reserved
> [ 3.208685] system 00:04: [io 0x0800] has been reserved
> [ 3.208687] system 00:04: [io 0x0804] has been reserved
> [ 3.208688] system 00:04: [io 0x087f] has been reserved
> [ 3.208690] system 00:04: [io 0x0cdc-0x0cdf] has been reserved
> [ 3.208692] system 00:04: [io 0x0b00-0x0b0f] has been reserved
> [ 3.208695] system 00:04: [io 0x0200-0x027f] could not be reserved
> [ 3.208697] system 00:04: [io 0x1770-0x1777] has been reserved
> [ 3.208699] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 3.208779] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 3.208782] system 00:05: [mem 0x00100000-0x9fffffff] could not be reserved
> [ 3.208784] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
> [ 3.208786] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 3.208909] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 3.209037] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 3.209101] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
> [ 3.209136] pnp 00:09: Plug and Play ACPI device, IDs SYN301c SYN0100 SYN0002 PNP0f13 (active)
> [ 3.209337] pnp 00:0a: Plug and Play ACPI device, IDs HPQ6007 (active)
> [ 3.209556] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
> [ 3.209795] pnp: PnP ACPI: found 12 devices
> [ 3.209796] ACPI: bus type PNP unregistered
> [ 3.217642] pci 0000:00:01.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
> [ 3.217646] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
> [ 3.217650] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
> [ 3.217724] pci 0000:00:01.0: BAR 6: assigned [mem 0xb0200000-0xb021ffff pref]
> [ 3.217728] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6840000-0xd685ffff pref]
> [ 3.217731] pci 0000:00:02.1: PCI bridge to [bus 01]
> [ 3.217734] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
> [ 3.217738] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
> [ 3.217741] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
> [ 3.217747] pci 0000:00:03.1: PCI bridge to [bus 02]
> [ 3.217750] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
> [ 3.217754] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
> [ 3.217758] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
> [ 3.217764] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1800000-0xd180ffff pref]
> [ 3.217766] pci 0000:00:03.2: PCI bridge to [bus 03]
> [ 3.217768] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
> [ 3.217772] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
> [ 3.217776] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
> [ 3.217781] pci 0000:00:03.4: PCI bridge to [bus 04]
> [ 3.217783] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
> [ 3.217787] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
> [ 3.217791] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
> [ 3.217796] pci 0000:00:14.4: PCI bridge to [bus 05]
> [ 3.217839] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 3.217840] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 3.217842] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 3.217844] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
> [ 3.217846] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
> [ 3.217847] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
> [ 3.217849] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
> [ 3.217851] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
> [ 3.217852] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
> [ 3.217854] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
> [ 3.217856] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
> [ 3.217857] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
> [ 3.217859] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
> [ 3.217860] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
> [ 3.217862] pci_bus 0000:00: resource 18 [mem 0xa0000000-0xdfffffff]
> [ 3.217864] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfed3ffff]
> [ 3.217865] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xfffdffff]
> [ 3.217868] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
> [ 3.217869] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd68fffff]
> [ 3.217871] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
> [ 3.217873] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
> [ 3.217875] pci_bus 0000:02: resource 1 [mem 0xd5800000-0xd67fffff]
> [ 3.217876] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd17fffff 64bit pref]
> [ 3.217878] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
> [ 3.217880] pci_bus 0000:03: resource 1 [mem 0xd4800000-0xd57fffff]
> [ 3.217882] pci_bus 0000:03: resource 2 [mem 0xd1800000-0xd27fffff 64bit pref]
> [ 3.217883] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
> [ 3.217885] pci_bus 0000:04: resource 1 [mem 0xd3800000-0xd47fffff]
> [ 3.217887] pci_bus 0000:04: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
> [ 3.217889] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
> [ 3.217890] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
> [ 3.217892] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
> [ 3.217894] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
> [ 3.217895] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
> [ 3.217897] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
> [ 3.217899] pci_bus 0000:05: resource 10 [mem 0x000d4000-0x000d7fff]
> [ 3.217900] pci_bus 0000:05: resource 11 [mem 0x000d8000-0x000dbfff]
> [ 3.217902] pci_bus 0000:05: resource 12 [mem 0x000dc000-0x000dffff]
> [ 3.217904] pci_bus 0000:05: resource 13 [mem 0x000e0000-0x000e3fff]
> [ 3.217905] pci_bus 0000:05: resource 14 [mem 0x000e4000-0x000e7fff]
> [ 3.217907] pci_bus 0000:05: resource 15 [mem 0x000e8000-0x000ebfff]
> [ 3.217908] pci_bus 0000:05: resource 16 [mem 0x000ec000-0x000effff]
> [ 3.217910] pci_bus 0000:05: resource 17 [mem 0x000f0000-0x000fffff]
> [ 3.217912] pci_bus 0000:05: resource 18 [mem 0xa0000000-0xdfffffff]
> [ 3.217913] pci_bus 0000:05: resource 19 [mem 0xf0000000-0xfed3ffff]
> [ 3.217915] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xfffdffff]
> [ 3.217952] NET: Registered protocol family 2
> [ 3.218250] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
> [ 3.218529] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 3.218789] TCP: Hash tables configured (established 65536 bind 65536)
> [ 3.218826] TCP: reno registered
> [ 3.218843] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 3.218893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 3.219011] NET: Registered protocol family 1
> [ 3.219032] pci 0000:00:01.0: Video device with shadowed ROM
> [ 3.333351] PCI: CLS mismatch (64 != 32), using 64 bytes
> [ 3.388911] Trying to unpack rootfs image as initramfs...
> [ 3.903592] Freeing initrd memory: 31236K (ffff8800342ee000 - ffff88003616f000)
> [ 3.903713] AMD-Vi: IOMMU performance counters supported
> [ 3.903958] pci 0000:00:00.2: can't derive routing for PCI INT A
> [ 3.903961] pci 0000:00:00.2: PCI INT A: no GSI - using ISA IRQ 11
> [ 3.904316] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
> [ 3.904318] AMD-Vi: Extended features: PPR GT IA PC
> [ 3.904323] AMD-Vi: Interrupt remapping enabled
> [ 3.904355] pci 0000:00:00.2: irq 72 for MSI/MSI-X
> [ 3.905664] AMD-Vi: Using passthrough domain for device 0000:00:01.0
> [ 3.919171] AMD-Vi: Using passthrough domain for device 0000:01:00.0
> [ 3.920903] AMD-Vi: Lazy IO/TLB flushing enabled
> [ 3.921444] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 3.921448] software IO TLB [mem 0x599b6000-0x5d9b6000] (64MB) mapped at [ffff8800599b6000-ffff88005d9b5fff]
> [ 3.921781] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
> [ 3.921785] LVT offset 0 assigned for vector 0x400
> [ 3.921811] perf: AMD IBS detected (0x000001ff)
> [ 3.921868] microcode: CPU0: patch_level=0x06003106
> [ 3.921906] microcode: CPU1: patch_level=0x06003106
> [ 3.921921] microcode: CPU2: patch_level=0x06003106
> [ 3.921933] microcode: CPU3: patch_level=0x06003106
> [ 3.922025] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
> [ 3.922028] Scanning for low memory corruption every 60 seconds
> [ 3.922431] Initialise system trusted keyring
> [ 3.922482] audit: initializing netlink socket (disabled)
> [ 3.922497] type=2000 audit(1427336001.584:1): initialized
> [ 3.953477] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 3.955197] zbud: loaded
> [ 3.955429] VFS: Disk quotas dquot_6.5.2
> [ 3.955478] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 3.956137] fuse init (API version 7.22)
> [ 3.956256] msgmni has been set to 13712
> [ 3.956315] Key type big_key registered
> [ 3.956997] Key type asymmetric registered
> [ 3.957003] Asymmetric key parser 'x509' registered
> [ 3.957078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 3.957153] io scheduler noop registered
> [ 3.957155] io scheduler deadline registered (default)
> [ 3.957190] io scheduler cfq registered
> [ 3.957612] pcieport 0000:00:02.1: irq 73 for MSI/MSI-X
> [ 3.957974] pcieport 0000:00:03.1: irq 74 for MSI/MSI-X
> [ 3.958308] pcieport 0000:00:03.2: irq 75 for MSI/MSI-X
> [ 3.958646] pcieport 0000:00:03.4: irq 76 for MSI/MSI-X
> [ 3.958745] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
> [ 3.958748] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
> [ 3.958752] pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
> [ 3.958770] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
> [ 3.958772] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
> [ 3.958776] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
> [ 3.958795] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
> [ 3.958797] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
> [ 3.958801] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
> [ 3.958818] pcieport 0000:00:03.4: Signaling PME through PCIe PME interrupt
> [ 3.958820] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
> [ 3.958823] pcie_pme 0000:00:03.4:pcie01: service driver pcie_pme loaded
> [ 3.958839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 3.958973] pciehp 0000:00:02.1:pcie04: HPC vendor_id 1022 device_id 1425 ss_vid 1022 ss_did 1234
> [ 3.959075] pciehp 0000:00:02.1:pcie04: service driver pciehp loaded
> [ 3.959088] pciehp 0000:00:03.2:pcie04: HPC vendor_id 1022 device_id 1426 ss_vid 1022 ss_did 1234
> [ 3.959122] pciehp 0000:00:03.2:pcie04: service driver pciehp loaded
> [ 3.959133] pciehp 0000:00:03.4:pcie04: HPC vendor_id 1022 device_id 1426 ss_vid 1022 ss_did 1234
> [ 3.959163] pciehp 0000:00:03.4:pcie04: service driver pciehp loaded
> [ 3.959168] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 3.959229] ipmi message handler version 39.2
> [ 3.959489] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
> [ 3.959855] ACPI: AC Adapter [AC] (on-line)
> [ 3.959944] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
> [ 3.959948] ACPI: Sleep Button [SLPB]
> [ 3.959986] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
> [ 3.960014] ACPI: Lid Switch [LID]
> [ 3.960554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 3.960557] ACPI: Power Button [PWRF]
> [ 3.960645] ACPI: acpi_idle registered with cpuidle
> [ 4.002619] thermal LNXTHERM:00: registered as thermal_zone0
> [ 4.002624] ACPI: Thermal Zone [CPUZ] (47 C)
> [ 4.042020] thermal LNXTHERM:01: registered as thermal_zone1
> [ 4.042025] ACPI: Thermal Zone [GFXZ] (0 C)
> [ 4.063006] thermal LNXTHERM:02: registered as thermal_zone2
> [ 4.063011] ACPI: Thermal Zone [EXTZ] (0 C)
> [ 4.085211] thermal LNXTHERM:03: registered as thermal_zone3
> [ 4.085216] ACPI: Thermal Zone [LOCZ] (0 C)
> [ 4.107594] thermal LNXTHERM:04: registered as thermal_zone4
> [ 4.107599] ACPI: Thermal Zone [BATZ] (21 C)
> [ 4.107699] GHES: HEST is not enabled!
> [ 4.107861] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 4.109904] Linux agpgart interface v0.103
> [ 4.110057] tpm_tis 00:0b: 1.2 TPM (device-id 0x1A, rev-id 16)
> [ 4.137380] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
> [ 4.137389] ACPI: Battery Slot [BAT0] (battery present)
> [ 4.410842] brd: module loaded
> [ 4.411976] loop: module loaded
> [ 4.412566] libphy: Fixed MDIO Bus: probed
> [ 4.412673] tun: Universal TUN/TAP device driver, 1.6
> [ 4.412675] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
> [ 4.412815] PPP generic driver version 2.4.2
> [ 4.412914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 4.412927] ehci-pci: EHCI PCI platform driver
> [ 4.413264] QUIRK: Enable AMD PLL fix
> [ 4.413304] ehci-pci 0000:00:12.2: EHCI Host Controller
> [ 4.413312] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
> [ 4.413318] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [ 4.413331] ehci-pci 0000:00:12.2: debug port 1
> [ 4.413388] ehci-pci 0000:00:12.2: irq 17, io mem 0xd694d000
> [ 4.424672] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
> [ 4.424759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 4.424762] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.424764] usb usb1: Product: EHCI Host Controller
> [ 4.424766] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
> [ 4.424767] usb usb1: SerialNumber: 0000:00:12.2
> [ 4.425055] hub 1-0:1.0: USB hub found
> [ 4.425071] hub 1-0:1.0: 5 ports detected
> [ 4.425731] ehci-pci 0000:00:13.2: EHCI Host Controller
> [ 4.425739] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
> [ 4.425744] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> [ 4.425757] ehci-pci 0000:00:13.2: debug port 1
> [ 4.425800] ehci-pci 0000:00:13.2: irq 17, io mem 0xd694b000
> [ 4.436701] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
> [ 4.436781] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 4.436783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.436786] usb usb2: Product: EHCI Host Controller
> [ 4.436787] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
> [ 4.436789] usb usb2: SerialNumber: 0000:00:13.2
> [ 4.437070] hub 2-0:1.0: USB hub found
> [ 4.437080] hub 2-0:1.0: 5 ports detected
> [ 4.437316] ehci-platform: EHCI generic platform driver
> [ 4.437331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 4.437333] ohci-pci: OHCI PCI platform driver
> [ 4.437698] ohci-pci 0000:00:12.0: OHCI PCI host controller
> [ 4.437706] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
> [ 4.437750] ohci-pci 0000:00:12.0: irq 18, io mem 0xd694e000
> [ 4.496756] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.496761] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.496763] usb usb3: Product: OHCI PCI host controller
> [ 4.496765] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
> [ 4.496767] usb usb3: SerialNumber: 0000:00:12.0
> [ 4.497066] hub 3-0:1.0: USB hub found
> [ 4.497082] hub 3-0:1.0: 5 ports detected
> [ 4.497698] ohci-pci 0000:00:13.0: OHCI PCI host controller
> [ 4.497707] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
> [ 4.497730] ohci-pci 0000:00:13.0: irq 18, io mem 0xd694c000
> [ 4.556771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.556776] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.556778] usb usb4: Product: OHCI PCI host controller
> [ 4.556780] usb usb4: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
> [ 4.556782] usb usb4: SerialNumber: 0000:00:13.0
> [ 4.557074] hub 4-0:1.0: USB hub found
> [ 4.557091] hub 4-0:1.0: 5 ports detected
> [ 4.557556] ohci-pci 0000:00:14.5: OHCI PCI host controller
> [ 4.557564] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
> [ 4.557589] ohci-pci 0000:00:14.5: irq 18, io mem 0xd694a000
> [ 4.616755] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 4.616760] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.616763] usb usb5: Product: OHCI PCI host controller
> [ 4.616764] usb usb5: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
> [ 4.616766] usb usb5: SerialNumber: 0000:00:14.5
> [ 4.617065] hub 5-0:1.0: USB hub found
> [ 4.617081] hub 5-0:1.0: 2 ports detected
> [ 4.617293] ohci-platform: OHCI generic platform driver
> [ 4.617309] uhci_hcd: USB Universal Host Controller Interface driver
> [ 4.617688] xhci_hcd 0000:00:10.0: xHCI Host Controller
> [ 4.617696] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
> [ 4.617975] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
> [ 4.617985] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
> [ 4.617997] xhci_hcd 0000:00:10.0: irq 79 for MSI/MSI-X
> [ 4.618006] xhci_hcd 0000:00:10.0: irq 80 for MSI/MSI-X
> [ 4.618014] xhci_hcd 0000:00:10.0: irq 81 for MSI/MSI-X
> [ 4.618166] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
> [ 4.618168] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.618170] usb usb6: Product: xHCI Host Controller
> [ 4.618172] usb usb6: Manufacturer: Linux 3.13.0-45-generic xhci_hcd
> [ 4.618173] usb usb6: SerialNumber: 0000:00:10.0
> [ 4.618351] hub 6-0:1.0: USB hub found
> [ 4.618394] hub 6-0:1.0: 2 ports detected
> [ 4.618621] xhci_hcd 0000:00:10.0: xHCI Host Controller
> [ 4.618625] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
> [ 4.621412] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
> [ 4.621414] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.621416] usb usb7: Product: xHCI Host Controller
> [ 4.621418] usb usb7: Manufacturer: Linux 3.13.0-45-generic xhci_hcd
> [ 4.621420] usb usb7: SerialNumber: 0000:00:10.0
> [ 4.621573] hub 7-0:1.0: USB hub found
> [ 4.621615] hub 7-0:1.0: 2 ports detected
> [ 4.633110] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 4.635073] i8042: Detected active multiplexing controller, rev 1.1
> [ 4.636076] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 4.636090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
> [ 4.636124] serio: i8042 AUX1 port at 0x60,0x64 irq 12
> [ 4.636148] serio: i8042 AUX2 port at 0x60,0x64 irq 12
> [ 4.636168] serio: i8042 AUX3 port at 0x60,0x64 irq 12
> [ 4.636414] mousedev: PS/2 mouse device common for all mice
> [ 4.636737] rtc_cmos 00:06: RTC can wake from S4
> [ 4.636892] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [ 4.636926] rtc_cmos 00:06: alarms up to one month, 114 bytes nvram, hpet irqs
> [ 4.637018] device-mapper: uevent: version 1.0.3
> [ 4.637120] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> [ 4.637130] ledtrig-cpu: registered to indicate activity on CPUs
> [ 4.637249] TCP: cubic registered
> [ 4.637356] NET: Registered protocol family 10
> [ 4.637570] NET: Registered protocol family 17
> [ 4.637581] Key type dns_resolver registered
> [ 4.638291] Loading compiled-in X.509 certificates
> [ 4.639255] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
> [ 4.639315] registered taskstats version 1
> [ 4.642587] Key type trusted registered
> [ 4.644890] Key type encrypted registered
> [ 4.647127] AppArmor: AppArmor sha1 policy hashing enabled
> [ 4.661263] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> [ 4.740749] usb 1-5: new high-speed USB device number 2 using ehci-pci
> [ 4.920681] tsc: Refined TSC clocksource calibration: 1896.456 MHz
> [ 4.958887] usb 1-5: New USB device found, idVendor=04ca, idProduct=7022
> [ 4.958892] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 4.958894] usb 1-5: Product: HP HD Webcam
> [ 4.958896] usb 1-5: Manufacturer: DDZLD01G46C6VD
> [ 5.164915] usb 5-2: new full-speed USB device number 2 using ohci-pci
> [ 5.301416] regulator-dummy: disabling
> [ 5.301628] Magic number: 7:312:208
> [ 5.301666] vc vcsa: hash matches
> [ 5.301773] rtc_cmos 00:06: setting system clock to 2015-03-26 02:13:24 UTC (1427336004)
> [ 5.302010] acpi-cpufreq: overriding BIOS provided _PSD data
> [ 5.302381] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 5.302383] EDD information not available.
> [ 5.302429] PM: Hibernation image not present or could not be loaded.
> [ 5.303793] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
> [ 5.303796] Write protecting the kernel read-only data: 12288k
> [ 5.307400] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
> [ 5.310568] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
> [ 5.330890] systemd-udevd[120]: starting version 204
> [ 5.333939] usb 5-2: New USB device found, idVendor=138a, idProduct=003f
> [ 5.333945] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
> [ 5.333948] usb 5-2: SerialNumber: 00b0245f4c92
> [ 5.350932] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 5.362327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 5.362343] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
> [ 5.364740] ahci 0000:00:11.0: version 3.0
> [ 5.382556] rtsx_pci 0000:04:00.0: irq 82 for MSI/MSI-X
> [ 5.382588] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 82
> [ 5.384471] ahci 0000:00:11.0: irq 83 for MSI/MSI-X
> [ 5.384483] ahci 0000:00:11.0: irq 84 for MSI/MSI-X
> [ 5.384492] ahci 0000:00:11.0: irq 85 for MSI/MSI-X
> [ 5.384500] ahci 0000:00:11.0: irq 86 for MSI/MSI-X
> [ 5.384508] ahci 0000:00:11.0: irq 87 for MSI/MSI-X
> [ 5.384516] ahci 0000:00:11.0: irq 88 for MSI/MSI-X
> [ 5.384523] ahci 0000:00:11.0: irq 89 for MSI/MSI-X
> [ 5.384581] ahci 0000:00:11.0: irq 90 for MSI/MSI-X
> [ 5.384665] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
> [ 5.384671] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
> [ 5.386691] wmi: Mapper loaded
> [ 5.389019] r8169 0000:02:00.0: irq 91 for MSI/MSI-X
> [ 5.389259] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000d82000, a0:2b:b8:33:f8:73, XID 10900800 IRQ 91
> [ 5.389264] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [ 5.390055] scsi0 : ahci
> [ 5.390217] scsi1 : ahci
> [ 5.390312] ata1: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f100 irq 83
> [ 5.390317] ata2: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f180 irq 84
> [ 5.413916] acpi device:01: registered as cooling_device4
> [ 5.414078] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
> [ 5.415565] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
> [ 5.417327] acpi device:0b: registered as cooling_device5
> [ 5.417475] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input12
> [ 5.881505] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5.881536] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 5.884826] ata1.00: ATA-9: HGST HTS541010A9E680, JA0OA710, max UDMA/133
> [ 5.884832] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 5.886380] ata2.00: ATAPI: hp DVDRW SU208FB, HH01, max UDMA/100
> [ 5.886737] ata1.00: configured for UDMA/133
> [ 5.886919] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
> [ 5.887165] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 5.887186] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 5.887189] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 5.887336] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.887340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.887394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.889189] ata2.00: configured for UDMA/100
> [ 5.897466] scsi 1:0:0:0: CD-ROM hp DVDRW SU208FB HH01 PQ: 0 ANSI: 5
> [ 5.908816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 5.908823] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 5.909057] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 5.909180] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 5.922094] Switched to clocksource tsc
> [ 5.967577] sda: sda1 sda2 sda3
> [ 5.968354] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 6.232351] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2653, fw id: 1481159
> [ 6.272050] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
> [ 8.004756] raid6: sse2x1 5891 MB/s
> [ 8.072758] raid6: sse2x2 8250 MB/s
> [ 8.140768] raid6: sse2x4 9447 MB/s
> [ 8.140770] raid6: using algorithm sse2x4 (9447 MB/s)
> [ 8.140771] raid6: using ssse3x2 recovery algorithm
> [ 8.142436] xor: automatically using best checksumming function:
> [ 8.180873] avx : 8733.000 MB/sec
> [ 8.194646] bio: create slab <bio-1> at 1
> [ 8.195049] Btrfs loaded
> [ 8.252847] random: nonblocking pool is initialized
> [ 8.587973] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
> [ 18.861643] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
> [ 18.913009] Adding 7282684k swap on /dev/sda3. Priority:-1 extents:1 across:7282684k FS
> [ 19.071730] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 19.215239] systemd-udevd[390]: starting version 204
> [ 19.608140] lp: driver loaded but no devices found
> [ 19.627265] ppdev: user-space parallel port driver
> [ 19.627862] Initializing HPQ6001 module
> [ 19.627985] input: HP Wireless hotkeys as /devices/virtual/input/input14
> [ 19.643350] hp_accel: laptop model unknown, using default axes configuration
> [ 19.680011] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
> [ 19.687318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 19.690260] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
> [ 19.690266] Disabling lock debugging due to kernel taint
> [ 19.728330] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBO 1 (20131115/utaddress-251)
> [ 19.728340] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [ 19.768562] fglrx: module verification failed: signature and/or required key missing - tainting kernel
> [ 19.773139] lis3lv02d: 8 bits 3DC sensor found
> [ 19.776807] cfg80211: Calling CRDA to update world regulatory domain
> [ 19.797615] <6>[fglrx] Maximum main memory to use for locked dma buffers: 6645 MBytes.
> [ 19.797828] <6>[fglrx] vendor: 1002 device: 130a count: 1
> [ 19.798035] MCE: In-kernel MCE decoding enabled.
> [ 19.798729] <6>[fglrx] vendor: 1002 device: 6901 count: 2
> [ 19.798909] <6>[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
> [ 19.798912] <6>[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
> [ 19.801933] EDAC MC: Ver: 3.0.0
> [ 19.807269] AMD64 EDAC driver v3.4.0
> [ 19.807328] EDAC amd64: DRAM ECC disabled.
> [ 19.807339] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
> [ 19.807339] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
> [ 19.807339] (Note that use of the override may cause unknown side effects.)
> [ 19.808563] <6>[fglrx] ioport: bar 4, base 0x6000, size: 0x100
> [ 19.810011] <6>[fglrx] ioport: bar 4, base 0x5000, size: 0x100
> [ 19.810324] <6>[fglrx] Kernel PAT support is enabled
> [ 19.810371] <6>[fglrx] module loaded - fglrx 14.30.4 [Feb 27 2015] with 2 minors
> [ 19.828188] snd_hda_intel 0000:00:01.1: Probing card using HDA DKMS, version 0.201503121632~ubuntu14.04.1
> [ 19.828971] snd_hda_intel 0000:00:01.1: irq 92 for MSI/MSI-X
> [ 19.829085] snd_hda_intel 0000:00:14.2: Probing card using HDA DKMS, version 0.201503121632~ubuntu14.04.1
> [ 19.845203] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
> [ 19.856058] sound hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
> [ 19.856072] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 19.856076] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
> [ 19.856080] sound hdaudioC1D0: mono: mono_out=0x0
> [ 19.856083] sound hdaudioC1D0: inputs:
> [ 19.856087] sound hdaudioC1D0: Mic=0x19
> [ 19.856090] sound hdaudioC1D0: Internal Mic=0x12
> [ 19.868511] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
> [ 19.879618] ath: phy0: Enable LNA combining
> [ 19.880803] ath: EEPROM regdomain: 0x60
> [ 19.880806] ath: EEPROM indicates we should expect a direct regpair map
> [ 19.880810] ath: Country alpha2 being used: 00
> [ 19.880812] ath: Regpair used: 0x60
> [ 19.892797] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 19.893013] device-mapper: multipath: version 1.6.0 loaded
> [ 19.893403] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90011f00000, irq=36
> [ 19.936777] kvm: Nested Virtualization enabled
> [ 19.936783] kvm: Nested Paging enabled
> [ 19.954827] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
> [ 19.956095] serio_raw serio3: raw access enabled on isa0060/serio3 (serio_raw0, minor 57)
> [ 20.124406] Bluetooth: Core ver 2.17
> [ 20.124431] NET: Registered protocol family 31
> [ 20.124434] Bluetooth: HCI device and connection manager initialized
> [ 20.124445] Bluetooth: HCI socket layer initialized
> [ 20.124448] Bluetooth: L2CAP socket layer initialized
> [ 20.124453] Bluetooth: SCO socket layer initialized
> [ 20.129080] Bluetooth: RFCOMM TTY layer initialized
> [ 20.129096] Bluetooth: RFCOMM socket layer initialized
> [ 20.129104] Bluetooth: RFCOMM ver 1.11
> [ 20.130702] type=1400 audit(1427336019.324:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
> [ 20.130711] type=1400 audit(1427336019.324:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
> [ 20.130718] type=1400 audit(1427336019.324:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
> [ 20.131283] type=1400 audit(1427336019.324:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
> [ 20.131292] type=1400 audit(1427336019.324:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
> [ 20.131393] type=1400 audit(1427336019.324:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=586 comm="apparmor_parser"
> [ 20.131404] type=1400 audit(1427336019.324:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=586 comm="apparmor_parser"
> [ 20.131569] type=1400 audit(1427336019.324:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
> [ 20.131598] type=1400 audit(1427336019.324:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=727 comm="apparmor_parser"
> [ 20.131605] type=1400 audit(1427336019.324:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=727 comm="apparmor_parser"
> [ 20.214199] input: HP WMI hotkeys as /devices/virtual/input/input18
> [ 20.357194] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 20.357201] Bluetooth: BNEP filters: protocol multicast
> [ 20.357214] Bluetooth: BNEP socket layer initialized
> [ 20.386096] init: failsafe main process (749) killed by TERM signal
> [ 20.484775] init: cups main process (729) killed by HUP signal
> [ 20.484793] init: cups main process ended, respawning
> [ 20.681703] cfg80211: World regulatory domain updated:
> [ 20.681709] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 20.681712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 20.681714] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 20.681716] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [ 20.681718] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 20.681719] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 21.336724] Linux video capture interface: v2.00
> [ 21.343710] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7022)
> [ 21.352224] input: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input19
> [ 21.352314] usbcore: registered new interface driver uvcvideo
> [ 21.352315] USB Video Class driver (1.1.1)
> [ 21.598069] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input20
> [ 21.924076] r8169 0000:02:00.0 eth0: link down
> [ 21.924176] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 21.924702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 21.934849] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
> [ 21.942180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 21.945851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 22.276988] thinkpad_ec: no ThinkPad embedded controller!
> [ 23.110635] wlan0: authenticate with 3c:ce:73:48:04:80
> [ 23.128143] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
> [ 24.142159] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
> [ 24.549478] fglrx_pci 0000:00:01.0: irq 93 for MSI/MSI-X
> [ 24.550294] <6>[fglrx] Firegl kernel thread PID: 1377
> [ 24.550423] <6>[fglrx] Firegl kernel thread PID: 1378
> [ 24.550505] <6>[fglrx] Firegl kernel thread PID: 1379
> [ 24.550622] <6>[fglrx] IRQ 93 Enabled
> [ 24.556703] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
> [ 24.556707] <6>[fglrx] Reserved FB block: Unshared offset:fa38000, size:4000
> [ 24.556708] <6>[fglrx] Reserved FB block: Unshared offset:fa3c000, size:4c4000
> [ 24.556710] <6>[fglrx] Reserved FB block: Unshared offset:ff00000, size:100000
> [ 24.556711] <6>[fglrx] Reserved FB block: Unshared offset:3ffd7000, size:29000
> [ 24.583673] vgaarb: this pci device is not a vga device
> [ 24.799197] fglrx_pci 0000:01:00.0: irq 94 for MSI/MSI-X
> [ 24.799981] <6>[fglrx] Firegl kernel thread PID: 1382
> [ 24.800134] <6>[fglrx] Firegl kernel thread PID: 1383
> [ 24.800240] <6>[fglrx] Firegl kernel thread PID: 1384
> [ 24.800366] <6>[fglrx] IRQ 94 Enabled
> [ 24.814629] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
> [ 24.814634] <6>[fglrx] Reserved FB block: Unshared offset:f7fa000, size:1000
> [ 24.814636] <6>[fglrx] Reserved FB block: Unshared offset:f7fb000, size:4000
> [ 24.814637] <6>[fglrx] Reserved FB block: Unshared offset:f7ff000, size:501000
> [ 24.814639] <6>[fglrx] Reserved FB block: Unshared offset:3ff5e000, size:a2000
> [ 24.845659] <6>[fglrx] ATIF platform detected with notification ID: 0xd0
> [ 24.848799] <6>[fglrx] ATIF platform detected with notification ID: 0xd0
> [ 25.082126] vgaarb: this pci device is not a vga device
> [ 25.133458] wlan0: authenticated
> [ 25.146376] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
> [ 26.130537] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
> [ 26.794642] init: plymouth-upstart-bridge main process ended, respawning
> [ 27.149671] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
> [ 27.149824] wlan0: associated
> [ 27.149841] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 27.149969] cfg80211: Calling CRDA for country: TW
> [ 27.150099] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
> [ 27.153547] ath: EEPROM regdomain: 0x809e
> [ 27.153554] ath: EEPROM indicates we should expect a country code
> [ 27.153556] ath: doing EEPROM country->regdmn map search
> [ 27.153558] ath: country maps to regdmn code: 0x50
> [ 27.153559] ath: Country alpha2 being used: TW
> [ 27.153560] ath: Regpair used: 0x50
> [ 27.153562] ath: regdomain 0x809e dynamically updated by country IE
> [ 27.153581] cfg80211: Regulatory domain changed to country: TW
> [ 27.153583] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 27.153584] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
> [ 27.153586] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
> [ 27.153588] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
> [ 27.158961] cfg80211: Calling CRDA to update world regulatory domain
> [ 27.165685] cfg80211: World regulatory domain updated:
> [ 27.165692] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 27.165699] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 27.165701] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 27.165704] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [ 27.165706] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 27.165708] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 31.304710] wlan0: authenticate with 3c:ce:73:48:04:80
> [ 31.321349] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
> [ 32.130956] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
> [ 32.326073] wlan0: authenticated
> [ 32.339865] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
> [ 33.143085] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
> [ 34.119143] wlan0: associate with 3c:ce:73:48:04:80 (try 3/3)
> [ 34.342402] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
> [ 34.342565] wlan0: associated
> [ 34.342778] cfg80211: Calling CRDA for country: TW
> [ 34.342809] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
> [ 34.348160] ath: EEPROM regdomain: 0x809e
> [ 34.348167] ath: EEPROM indicates we should expect a country code
> [ 34.348169] ath: doing EEPROM country->regdmn map search
> [ 34.348171] ath: country maps to regdmn code: 0x50
> [ 34.348173] ath: Country alpha2 being used: TW
> [ 34.348175] ath: Regpair used: 0x50
> [ 34.348177] ath: regdomain 0x809e dynamically updated by country IE
> [ 34.348198] cfg80211: Regulatory domain changed to country: TW
> [ 34.348200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 34.348202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
> [ 34.348205] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
> [ 34.348206] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
> [ 34.355440] cfg80211: Calling CRDA to update world regulatory domain
> [ 34.356156] wlan0: authenticate with 3c:ce:73:48:04:80
> [ 34.366285] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
> [ 34.366462] cfg80211: World regulatory domain updated:
> [ 34.366466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 34.366468] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 34.366471] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 34.366473] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [ 34.366475] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 34.366477] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 35.155055] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
> [ 36.119366] wlan0: send auth to 3c:ce:73:48:04:80 (try 3/3)
> [ 36.370298] wlan0: authenticated
> [ 36.383351] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
> [ 37.155284] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
> [ 38.119556] wlan0: associate with 3c:ce:73:48:04:80 (try 3/3)
> [ 38.386778] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
> [ 38.386939] wlan0: associated
> [ 38.387061] cfg80211: Calling CRDA for country: TW
> [ 38.387213] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
> [ 38.392236] ath: EEPROM regdomain: 0x809e
> [ 38.392243] ath: EEPROM indicates we should expect a country code
> [ 38.392245] ath: doing EEPROM country->regdmn map search
> [ 38.392247] ath: country maps to regdmn code: 0x50
> [ 38.392249] ath: Country alpha2 being used: TW
> [ 38.392251] ath: Regpair used: 0x50
> [ 38.392253] ath: regdomain 0x809e dynamically updated by country IE
> [ 38.392274] cfg80211: Regulatory domain changed to country: TW
> [ 38.392276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 38.392278] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
> [ 38.392280] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
> [ 38.392282] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
> [ 38.404049] cfg80211: Calling CRDA to update world regulatory domain
> [ 38.411033] cfg80211: World regulatory domain updated:
> [ 38.411039] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> [ 38.411041] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 38.411043] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 38.411045] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> [ 38.411047] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 38.411049] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> [ 39.539948] systemd-hostnamed[1844]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <20150326120547.GU4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2015-03-27 0:48 ` AceLan Kao
[not found] ` <CAFv23QnUO+w0EXUx8DtgPx0W=fz37_R04EW6P-g+PF_y_U1dfA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: AceLan Kao @ 2015-03-27 0:48 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 81513 bytes --]
Hi Joerg,
Very thanks for your time.
This is the log booting with kernel 4.0rc5 without fglrx loaded.
Thanks.
Best regards,
AceLan Kao.
2015-03-26 20:05 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> The parameter is just called 'amd_iommu_dump'. But your dmesg contains
> the needed information from that parameter. Can you please try the same
> again with a recent upstream kernel and without any proprietary module
> loaded (means no fglrx)?
>
>
> Joerg
>
> On Thu, Mar 26, 2015 at 10:26:53AM +0800, AceLan Kao wrote:
>> Hi Joerg,
>>
>> Here you are.
>> I've tried to add iommu_dump, amd_iommu_dump, and amd_iommu_dump=true
>> on kernel command line,
>> but didn't find anything useful.
>> The attached log uses "amd_iommu_dump=true"
>>
>> Best regards,
>> AceLan Kao.
>>
>> 2015-03-25 22:04 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
>> > On Wed, Mar 25, 2015 at 11:30:20AM +0800, AceLan Kao wrote:
>> >> We have some AMD machines(AMD cpu and graphics) that need to set
>> >> amd_iommu=off to work.
>> >> Some of them have wifi issue that it can't connect to any AP(no
>> >> interrupt)(can set noapic to workaround it, too),
>> >> and some of them have graphics issues.
>> >> The only workaround we found is to set amd_iommu=off, and it fixes both issues.
>> >>
>> >> I have 2 questions.
>> >> 1. What kind of these issues would be, are they a driver issue or a
>> >> BIOS issue? If it's a BIOS issue, what we should tell the BIOS
>> >> engineers, so that they know how to fix it?
>> >> 2. Some of the machines may not have the chance to get a BIOS update,
>> >> do you think it's okay to add a quirk in amd_iommu driver to blacklist
>> >> out those machines? Are there any side effects if we do so?
>> >
>> > Hard to tell what the issue is. Can you please boot the affected machine
>> > with AMD IOMMU enabled and amd_iommu_dump on the command line and send
>> > me dmesg of the machine after boot?
>> >
>> > Thanks,
>> >
>> > Joerg
>> >
>
>> [ 0.000000] Initializing cgroup subsys cpuset
>> [ 0.000000] Initializing cgroup subsys cpu
>> [ 0.000000] Initializing cgroup subsys cpuacct
>> [ 0.000000] Linux version 3.13.0-45-generic (buildd@phianna) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:36:28 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
>> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump=true quiet splash
>> [ 0.000000] KERNEL supported cpus:
>> [ 0.000000] Intel GenuineIntel
>> [ 0.000000] AMD AuthenticAMD
>> [ 0.000000] Centaur CentaurHauls
>> [ 0.000000] e820: BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
>> [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005d9b5fff] usable
>> [ 0.000000] BIOS-e820: [mem 0x000000005d9b6000-0x000000005e8b1fff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x000000005e8b2000-0x000000005efb1fff] ACPI NVS
>> [ 0.000000] BIOS-e820: [mem 0x000000005efb2000-0x000000005effefff] ACPI data
>> [ 0.000000] BIOS-e820: [mem 0x000000005efff000-0x000000005effffff] usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
>> [ 0.000000] NX (Execute Disable) protection: active
>> [ 0.000000] SMBIOS 2.7 present.
>> [ 0.000000] DMI: Hewlett-Packard HP ProBook 445G2/2234, BIOS M75 Ver. 01.07 09/16/2014
>> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
>> [ 0.000000] MTRR default type: uncachable
>> [ 0.000000] MTRR fixed ranges enabled:
>> [ 0.000000] 00000-9FFFF write-back
>> [ 0.000000] A0000-BFFFF uncachable
>> [ 0.000000] C0000-DFFFF write-through
>> [ 0.000000] E0000-FFFFF write-protect
>> [ 0.000000] MTRR variable ranges enabled:
>> [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
>> [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
>> [ 0.000000] 2 base 0000FF800000 mask FFFFFF800000 write-protect
>> [ 0.000000] 3 disabled
>> [ 0.000000] 4 disabled
>> [ 0.000000] 5 disabled
>> [ 0.000000] 6 disabled
>> [ 0.000000] 7 disabled
>> [ 0.000000] TOM2: 000000025f000000 aka 9712M
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> [ 0.000000] e820: last_pfn = 0x5f000 max_arch_pfn = 0x400000000
>> [ 0.000000] Scanning 1 areas for low memory corruption
>> [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
>> [ 0.000000] Using GB pages for direct mapping
>> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
>> [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
>> [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
>> [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
>> [ 0.000000] init_memory_mapping: [mem 0x25ee00000-0x25effffff]
>> [ 0.000000] [mem 0x25ee00000-0x25effffff] page 2M
>> [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
>> [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25edfffff]
>> [ 0.000000] [mem 0x25c000000-0x25edfffff] page 2M
>> [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
>> [ 0.000000] [mem 0x200000000-0x23fffffff] page 1G
>> [ 0.000000] [mem 0x240000000-0x25bffffff] page 2M
>> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x5d9b5fff]
>> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
>> [ 0.000000] [mem 0x00200000-0x5d7fffff] page 2M
>> [ 0.000000] [mem 0x5d800000-0x5d9b5fff] page 4k
>> [ 0.000000] init_memory_mapping: [mem 0x5efff000-0x5effffff]
>> [ 0.000000] [mem 0x5efff000-0x5effffff] page 4k
>> [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
>> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
>> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
>> [ 0.000000] RAMDISK: [mem 0x342ee000-0x3616efff]
>> [ 0.000000] ACPI: RSDP 00000000000f2f90 000024 (v02 HPQOEM)
>> [ 0.000000] ACPI: XSDT 000000005effd0e8 00009C (v01 HPQOEM SLIC-MPC 00000003 01000013)
>> [ 0.000000] ACPI: FACP 000000005effb000 00010C (v05 HPQOEM 180F 00000003 HP 00000001)
>> [ 0.000000] ACPI: DSDT 000000005efd8000 01E7AD (v01 HPQOEM 180F 00000001 INTL 20130927)
>> [ 0.000000] ACPI: FACS 000000005ed69000 000040
>> [ 0.000000] ACPI: HPET 000000005effa000 000038 (v01 HPQOEM 180F 00000001 HP 00000001)
>> [ 0.000000] ACPI: APIC 000000005eff9000 000090 (v01 HPQOEM 180F 00000001 HP 00000001)
>> [ 0.000000] ACPI: MCFG 000000005eff8000 00003C (v01 HPQOEM 180F 00000001 HP 00000001)
>> [ 0.000000] ACPI: TCPA 000000005eff7000 000032 (v02 HPQOEM 180F 00000000 HP 00000001)
>> [ 0.000000] ACPI: FPDT 000000005efd5000 000044 (v01 HPQOEM 180F 00000001 HP 00000001)
>> [ 0.000000] ACPI: BGRT 000000005efd4000 000038 (v00 HPQOEM 180F 00000001 HP 00000001)
>> [ 0.000000] ACPI: SSDT 000000005efd3000 000B9C (v01 AMD BALLINA 00000001 AMD 00000001)
>> [ 0.000000] ACPI: SSDT 000000005efc9000 009399 (v02 AMD BALLINA 00000002 MSFT 04000000)
>> [ 0.000000] ACPI: IVRS 000000005efc8000 000078 (v02 AMD BALLINA 00000001 AMD 00000000)
>> [ 0.000000] ACPI: CRAT 000000005efc7000 000550 (v01 AMD BALLINA 00000001 AMD 00000001)
>> [ 0.000000] ACPI: SSDT 000000005efc6000 000789 (v01 HP AMDSGTBL 00000001 INTL 20130927)
>> [ 0.000000] ACPI: SSDT 000000005efc5000 000325 (v01 HP HPZPODDT 00000001 INTL 20130927)
>> [ 0.000000] ACPI: SSDT 000000005efc4000 00081B (v01 AMD CPMADPS4 00000001 INTL 20130927)
>> [ 0.000000] ACPI: SSDT 000000005efc2000 001207 (v01 AMD CPMCMN 00000001 INTL 20130927)
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] No NUMA configuration found
>> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
>> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25effffff]
>> [ 0.000000] NODE_DATA [mem 0x25eff9000-0x25effdfff]
>> [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257600000-ffff88025e5fffff] on node 0
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
>> [ 0.000000] Normal [mem 0x100000000-0x25effffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
>> [ 0.000000] node 0: [mem 0x00100000-0x5d9b5fff]
>> [ 0.000000] node 0: [mem 0x5efff000-0x5effffff]
>> [ 0.000000] node 0: [mem 0x100000000-0x25effffff]
>> [ 0.000000] On node 0 totalpages: 1821012
>> [ 0.000000] DMA zone: 64 pages used for memmap
>> [ 0.000000] DMA zone: 21 pages reserved
>> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
>> [ 0.000000] DMA32 zone: 5927 pages used for memmap
>> [ 0.000000] DMA32 zone: 379319 pages, LIFO batch:31
>> [ 0.000000] Normal zone: 22464 pages used for memmap
>> [ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
>> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>> [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
>> [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ2 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
>> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>> [ 0.000000] nr_irqs_gsi: 72
>> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x5d9b6000-0x5e8b1fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x5e8b2000-0x5efb1fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x5efb2000-0x5effefff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
>> [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
>> [ 0.000000] e820: [mem 0x5f000000-0xdfffffff] available for PCI devices
>> [ 0.000000] Booting paravirtualized kernel on bare hardware
>> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
>> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025ec00000 s82368 r8192 d24128 u524288
>> [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
>> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1792536
>> [ 0.000000] Policy zone: Normal
>> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump=true quiet splash
>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>> [ 0.000000] Checking aperture...
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] Node 0: aperture @ 0 size 32 MB
>> [ 0.000000] Your BIOS doesn't leave a aperture memory hole
>> [ 0.000000] Please enable the IOMMU option in the BIOS setup
>> [ 0.000000] This costs you 64 MB of RAM
>> [ 0.000000] Mapping aperture over 65536 KB of RAM @ 54000000
>> [ 0.000000] PM: Registered nosave memory: [mem 0x54000000-0x57ffffff]
>> [ 0.000000] Memory: 6989436K/7284048K available (7383K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 294612K reserved)
>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
>> [ 0.000000] Offload RCU callbacks from all CPUs
>> [ 0.000000] Offload RCU callbacks from CPUs: 0-3.
>> [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
>> [ 0.000000] spurious 8259A interrupt: IRQ7.
>> [ 0.000000] Console: colour VGA+ 80x25
>> [ 0.000000] console [tty0] enabled
>> [ 0.000000] allocated 29360128 bytes of page_cgroup
>> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>> [ 0.000000] hpet clockevent registered
>> [ 0.000000] tsc: Fast TSC calibration using PIT
>> [ 0.004000] tsc: Detected 1896.472 MHz processor
>> [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3792.94 BogoMIPS (lpj=7585888)
>> [ 0.000007] pid_max: default: 32768 minimum: 301
>> [ 0.000040] Security Framework initialized
>> [ 0.000064] AppArmor: AppArmor initialized
>> [ 0.000065] Yama: becoming mindful.
>> [ 0.000688] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>> [ 0.003568] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>> [ 0.004849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>> [ 0.004863] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>> [ 0.005153] Initializing cgroup subsys memory
>> [ 0.005163] Initializing cgroup subsys devices
>> [ 0.005165] Initializing cgroup subsys freezer
>> [ 0.005168] Initializing cgroup subsys blkio
>> [ 0.005169] Initializing cgroup subsys perf_event
>> [ 0.005172] Initializing cgroup subsys hugetlb
>> [ 0.005199] tseg: 005f000000
>> [ 0.005201] CPU: Physical Processor ID: 0
>> [ 0.005203] CPU: Processor Core ID: 0
>> [ 0.005205] mce: CPU supports 7 MCE banks
>> [ 0.005212] LVT offset 1 assigned for vector 0xf9
>> [ 0.005221] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
>> [ 0.005221] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
>> [ 0.005221] tlb_flushall_shift: 5
>> [ 0.005347] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
>> [ 0.006447] ACPI: Core revision 20131115
>> [ 0.017553] ACPI: All ACPI Tables successfully acquired
>> [ 0.056583] ftrace: allocating 28554 entries in 112 pages
>> [ 0.072165] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
>> [ 0.072169] AMD-Vi: mmio-addr: 00000000feb80000
>> [ 0.072213] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
>> [ 0.072214] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
>> [ 0.073260] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
>> [ 0.073262] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
>> [ 0.073272] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
>> [ 0.073274] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
>> [ 0.073276] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
>> [ 0.271580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.311273] smpboot: CPU0: AMD A10-7300 Radeon R6, 10 Compute Cores 4C+6G (fam: 15, model: 30, stepping: 01)
>> [ 0.415445] Performance Events: Fam15h core perfctr, AMD PMU driver.
>> [ 0.415452] ... version: 0
>> [ 0.415454] ... bit width: 48
>> [ 0.415456] ... generic registers: 6
>> [ 0.415457] ... value mask: 0000ffffffffffff
>> [ 0.415459] ... max period: 00007fffffffffff
>> [ 0.415460] ... fixed-purpose events: 0
>> [ 0.415461] ... event mask: 000000000000003f
>> [ 0.417469] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>> [ 0.417572] x86: Booting SMP configuration:
>> [ 0.417575] .... node #0, CPUs: #1 #2 #3
>> [ 0.457291] x86: Booted up 1 node, 4 CPUs
>> [ 0.457296] smpboot: Total of 4 processors activated (15171.77 BogoMIPS)
>> [ 0.458465] devtmpfs: initialized
>> [ 0.461887] EVM: security.selinux
>> [ 0.461889] EVM: security.SMACK64
>> [ 0.461891] EVM: security.ima
>> [ 0.461893] EVM: security.capability
>> [ 0.462005] PM: Registering ACPI NVS region [mem 0x5e8b2000-0x5efb1fff] (7340032 bytes)
>> [ 0.463313] pinctrl core: initialized pinctrl subsystem
>> [ 0.463397] regulator-dummy: no parameters
>> [ 0.463495] RTC time: 2:13:19, date: 03/26/15
>> [ 0.463544] NET: Registered protocol family 16
>> [ 0.463711] cpuidle: using governor ladder
>> [ 0.463713] cpuidle: using governor menu
>> [ 0.463926] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>> [ 0.463928] ACPI: bus type PCI registered
>> [ 0.463930] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>> [ 0.464081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>> [ 0.464084] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>> [ 0.480530] PCI: Using configuration type 1 for base access
>> [ 0.480781] mtrr: your CPUs had inconsistent fixed MTRR settings
>> [ 0.480783] mtrr: your CPUs had inconsistent variable MTRR settings
>> [ 0.480784] mtrr: probably your BIOS does not setup all CPUs.
>> [ 0.480785] mtrr: corrected configuration.
>> [ 0.482074] bio: create slab <bio-0> at 0
>> [ 0.482299] ACPI: Added _OSI(Module Device)
>> [ 0.482301] ACPI: Added _OSI(Processor Device)
>> [ 0.482303] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [ 0.482304] ACPI: Added _OSI(Processor Aggregator Device)
>> [ 3.128232] ACPI: Interpreter enabled
>> [ 3.128255] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
>> [ 3.128263] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
>> [ 3.128291] ACPI: (supports S0 S3 S4 S5)
>> [ 3.128294] ACPI: Using IOAPIC for interrupt routing
>> [ 3.128639] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>> [ 3.128952] ACPI: No dock devices found.
>> [ 3.134669] ACPI: Power Resource [APPR] (off)
>> [ 3.146814] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>> [ 3.147339] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [ 3.147349] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>> [ 3.147860] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>> [ 3.148084] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf5ff])
>> [ 3.148088] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
>> [ 3.148407] PCI host bridge to bus 0000:00
>> [ 3.148412] pci_bus 0000:00: root bus resource [bus 00-ff]
>> [ 3.148414] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
>> [ 3.148416] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
>> [ 3.148418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>> [ 3.148419] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
>> [ 3.148421] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
>> [ 3.148423] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
>> [ 3.148424] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>> [ 3.148426] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>> [ 3.148428] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>> [ 3.148429] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>> [ 3.148431] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
>> [ 3.148432] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
>> [ 3.148434] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
>> [ 3.148435] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
>> [ 3.148437] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff]
>> [ 3.148439] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff]
>> [ 3.148440] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfffdffff]
>> [ 3.148448] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
>> [ 3.148580] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
>> [ 3.148737] pci 0000:00:01.0: [1002:130a] type 00 class 0x030000
>> [ 3.148751] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
>> [ 3.148761] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
>> [ 3.148767] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff]
>> [ 3.148774] pci 0000:00:01.0: reg 0x24: [mem 0xd6900000-0xd693ffff]
>> [ 3.148781] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>> [ 3.148815] pci 0000:00:01.0: supports D1 D2
>> [ 3.148817] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
>> [ 3.148905] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
>> [ 3.148917] pci 0000:00:01.1: reg 0x10: [mem 0xd6940000-0xd6943fff 64bit]
>> [ 3.148975] pci 0000:00:01.1: supports D1 D2
>> [ 3.149111] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
>> [ 3.149199] pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
>> [ 3.149268] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
>> [ 3.149421] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
>> [ 3.149518] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
>> [ 3.149587] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
>> [ 3.149650] pci 0000:00:03.1: System wakeup disabled by ACPI
>> [ 3.149683] pci 0000:00:03.2: [1022:1426] type 01 class 0x060400
>> [ 3.149751] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
>> [ 3.149809] pci 0000:00:03.2: System wakeup disabled by ACPI
>> [ 3.149912] pci 0000:00:03.4: [1022:1426] type 01 class 0x060400
>> [ 3.149980] pci 0000:00:03.4: PME# supported from D0 D3hot D3cold
>> [ 3.150039] pci 0000:00:03.4: System wakeup disabled by ACPI
>> [ 3.150132] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
>> [ 3.150283] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
>> [ 3.150307] pci 0000:00:10.0: reg 0x10: [mem 0xd6948000-0xd6949fff 64bit]
>> [ 3.150417] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
>> [ 3.150481] pci 0000:00:10.0: System wakeup disabled by ACPI
>> [ 3.150555] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
>> [ 3.150575] pci 0000:00:11.0: reg 0x10: [io 0x6118-0x611f]
>> [ 3.150585] pci 0000:00:11.0: reg 0x14: [io 0x6124-0x6127]
>> [ 3.150595] pci 0000:00:11.0: reg 0x18: [io 0x6110-0x6117]
>> [ 3.150605] pci 0000:00:11.0: reg 0x1c: [io 0x6120-0x6123]
>> [ 3.150615] pci 0000:00:11.0: reg 0x20: [io 0x6100-0x610f]
>> [ 3.150626] pci 0000:00:11.0: reg 0x24: [mem 0xd694f000-0xd694f7ff]
>> [ 3.150775] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
>> [ 3.150789] pci 0000:00:12.0: reg 0x10: [mem 0xd694e000-0xd694efff]
>> [ 3.150993] pci 0000:00:12.0: System wakeup disabled by ACPI
>> [ 3.151076] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
>> [ 3.151098] pci 0000:00:12.2: reg 0x10: [mem 0xd694d000-0xd694d0ff]
>> [ 3.151188] pci 0000:00:12.2: supports D1 D2
>> [ 3.151190] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
>> [ 3.151255] pci 0000:00:12.2: System wakeup disabled by ACPI
>> [ 3.151327] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
>> [ 3.151344] pci 0000:00:13.0: reg 0x10: [mem 0xd694c000-0xd694cfff]
>> [ 3.151504] pci 0000:00:13.0: System wakeup disabled by ACPI
>> [ 3.151547] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
>> [ 3.151568] pci 0000:00:13.2: reg 0x10: [mem 0xd694b000-0xd694b0ff]
>> [ 3.151657] pci 0000:00:13.2: supports D1 D2
>> [ 3.151658] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
>> [ 3.151720] pci 0000:00:13.2: System wakeup disabled by ACPI
>> [ 3.151791] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
>> [ 3.151976] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
>> [ 3.152001] pci 0000:00:14.2: reg 0x10: [mem 0xd6944000-0xd6947fff 64bit]
>> [ 3.152072] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>> [ 3.152147] pci 0000:00:14.2: System wakeup disabled by ACPI
>> [ 3.152217] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
>> [ 3.152387] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
>> [ 3.152516] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
>> [ 3.152531] pci 0000:00:14.5: reg 0x10: [mem 0xd694a000-0xd694afff]
>> [ 3.152688] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
>> [ 3.152763] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
>> [ 3.152831] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
>> [ 3.152903] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
>> [ 3.152977] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
>> [ 3.153046] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
>> [ 3.153281] pci 0000:01:00.0: [1002:6901] type 00 class 0x038000
>> [ 3.153313] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
>> [ 3.153337] pci 0000:01:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref]
>> [ 3.153353] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff]
>> [ 3.153369] pci 0000:01:00.0: reg 0x24: [mem 0xd6800000-0xd683ffff]
>> [ 3.153385] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>> [ 3.153482] pci 0000:01:00.0: supports D1 D2
>> [ 3.161530] pci 0000:00:02.1: PCI bridge to [bus 01]
>> [ 3.161540] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
>> [ 3.161545] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
>> [ 3.161550] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
>> [ 3.161711] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
>> [ 3.161744] pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
>> [ 3.161780] pci 0000:02:00.0: reg 0x18: [mem 0xd5804000-0xd5804fff 64bit]
>> [ 3.161801] pci 0000:02:00.0: reg 0x20: [mem 0xd5800000-0xd5803fff 64bit]
>> [ 3.161887] pci 0000:02:00.0: supports D1 D2
>> [ 3.161889] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [ 3.161950] pci 0000:02:00.0: System wakeup disabled by ACPI
>> [ 3.168361] pci 0000:00:03.1: PCI bridge to [bus 02]
>> [ 3.168372] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
>> [ 3.168377] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
>> [ 3.168383] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
>> [ 3.168530] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
>> [ 3.168556] pci 0000:03:00.0: reg 0x10: [mem 0xd4800000-0xd487ffff 64bit]
>> [ 3.168606] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
>> [ 3.168662] pci 0000:03:00.0: supports D1 D2
>> [ 3.168664] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [ 3.177599] pci 0000:00:03.2: PCI bridge to [bus 03]
>> [ 3.177610] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
>> [ 3.177614] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
>> [ 3.177620] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
>> [ 3.177754] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
>> [ 3.177779] pci 0000:04:00.0: reg 0x10: [mem 0xd3800000-0xd3800fff]
>> [ 3.177906] pci 0000:04:00.0: supports D1 D2
>> [ 3.177908] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
>> [ 3.184347] pci 0000:00:03.4: PCI bridge to [bus 04]
>> [ 3.184358] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
>> [ 3.184363] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
>> [ 3.184369] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
>> [ 3.184540] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
>> [ 3.184551] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
>> [ 3.184554] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
>> [ 3.184556] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>> [ 3.184558] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
>> [ 3.184560] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
>> [ 3.184562] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
>> [ 3.184564] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>> [ 3.184566] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>> [ 3.184568] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
>> [ 3.184570] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
>> [ 3.184572] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
>> [ 3.184573] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
>> [ 3.184575] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
>> [ 3.184577] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
>> [ 3.184579] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xdfffffff] (subtractive decode)
>> [ 3.184581] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed3ffff] (subtractive decode)
>> [ 3.184583] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xfffdffff] (subtractive decode)
>> [ 3.184627] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>> [ 3.185979] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.186077] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.186174] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.186270] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.186346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.186407] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.186467] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.186527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
>> [ 3.187408] ACPI: Enabled 2 GPEs in block 00 to 1F
>> [ 3.187419] ACPI: \_SB_.PCI0: notify handler is installed
>> [ 3.187533] Found 1 acpi root devices
>> [ 3.187608] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
>> [ 3.187767] vgaarb: setting as boot device: PCI:0000:00:01.0
>> [ 3.187770] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
>> [ 3.187781] vgaarb: loaded
>> [ 3.187783] vgaarb: bridge control possible 0000:00:01.0
>> [ 3.188000] SCSI subsystem initialized
>> [ 3.188135] libata version 3.00 loaded.
>> [ 3.188180] ACPI: bus type USB registered
>> [ 3.188204] usbcore: registered new interface driver usbfs
>> [ 3.188215] usbcore: registered new interface driver hub
>> [ 3.188252] usbcore: registered new device driver usb
>> [ 3.188466] PCI: Using ACPI for IRQ routing
>> [ 3.197688] PCI: pci_cache_line_size set to 64 bytes
>> [ 3.197791] Expanded resource reserved due to conflict with PCI Bus 0000:00
>> [ 3.197794] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
>> [ 3.197797] e820: reserve RAM buffer [mem 0x5d9b6000-0x5fffffff]
>> [ 3.197798] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
>> [ 3.197800] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
>> [ 3.197927] NetLabel: Initializing
>> [ 3.197930] NetLabel: domain hash size = 128
>> [ 3.197931] NetLabel: protocols = UNLABELED CIPSOv4
>> [ 3.197946] NetLabel: unlabeled traffic allowed by default
>> [ 3.198213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> [ 3.198218] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>> [ 3.200349] Switched to clocksource hpet
>> [ 3.207979] AppArmor: AppArmor Filesystem Enabled
>> [ 3.208013] pnp: PnP ACPI init
>> [ 3.208029] ACPI: bus type PNP registered
>> [ 3.208173] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>> [ 3.208176] system 00:00: [mem 0xfeb00000-0xfeb00fff] has been reserved
>> [ 3.208178] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>> [ 3.208181] system 00:00: [mem 0xfec20000-0xfec20fff] could not be reserved
>> [ 3.208183] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>> [ 3.208187] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 3.208434] pnp 00:01: [dma 4]
>> [ 3.208458] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>> [ 3.208533] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>> [ 3.208560] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>> [ 3.208660] system 00:04: [io 0x0400-0x04cf] could not be reserved
>> [ 3.208662] system 00:04: [io 0x04d0-0x04d1] has been reserved
>> [ 3.208664] system 00:04: [io 0x04d6] has been reserved
>> [ 3.208666] system 00:04: [io 0x0680-0x06ff] has been reserved
>> [ 3.208668] system 00:04: [io 0x077a] has been reserved
>> [ 3.208670] system 00:04: [io 0x0c00-0x0c01] has been reserved
>> [ 3.208672] system 00:04: [io 0x0c14] has been reserved
>> [ 3.208674] system 00:04: [io 0x0c50-0x0c52] has been reserved
>> [ 3.208675] system 00:04: [io 0x0c6c] has been reserved
>> [ 3.208677] system 00:04: [io 0x0c6f] has been reserved
>> [ 3.208679] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
>> [ 3.208681] system 00:04: [io 0x0220-0x0227] has been reserved
>> [ 3.208683] system 00:04: [io 0x0260-0x0273] has been reserved
>> [ 3.208685] system 00:04: [io 0x0800] has been reserved
>> [ 3.208687] system 00:04: [io 0x0804] has been reserved
>> [ 3.208688] system 00:04: [io 0x087f] has been reserved
>> [ 3.208690] system 00:04: [io 0x0cdc-0x0cdf] has been reserved
>> [ 3.208692] system 00:04: [io 0x0b00-0x0b0f] has been reserved
>> [ 3.208695] system 00:04: [io 0x0200-0x027f] could not be reserved
>> [ 3.208697] system 00:04: [io 0x1770-0x1777] has been reserved
>> [ 3.208699] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [ 3.208779] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
>> [ 3.208782] system 00:05: [mem 0x00100000-0x9fffffff] could not be reserved
>> [ 3.208784] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
>> [ 3.208786] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
>> [ 3.208909] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>> [ 3.209037] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
>> [ 3.209101] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
>> [ 3.209136] pnp 00:09: Plug and Play ACPI device, IDs SYN301c SYN0100 SYN0002 PNP0f13 (active)
>> [ 3.209337] pnp 00:0a: Plug and Play ACPI device, IDs HPQ6007 (active)
>> [ 3.209556] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>> [ 3.209795] pnp: PnP ACPI: found 12 devices
>> [ 3.209796] ACPI: bus type PNP unregistered
>> [ 3.217642] pci 0000:00:01.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
>> [ 3.217646] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
>> [ 3.217650] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
>> [ 3.217724] pci 0000:00:01.0: BAR 6: assigned [mem 0xb0200000-0xb021ffff pref]
>> [ 3.217728] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6840000-0xd685ffff pref]
>> [ 3.217731] pci 0000:00:02.1: PCI bridge to [bus 01]
>> [ 3.217734] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
>> [ 3.217738] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
>> [ 3.217741] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
>> [ 3.217747] pci 0000:00:03.1: PCI bridge to [bus 02]
>> [ 3.217750] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
>> [ 3.217754] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
>> [ 3.217758] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
>> [ 3.217764] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1800000-0xd180ffff pref]
>> [ 3.217766] pci 0000:00:03.2: PCI bridge to [bus 03]
>> [ 3.217768] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
>> [ 3.217772] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
>> [ 3.217776] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
>> [ 3.217781] pci 0000:00:03.4: PCI bridge to [bus 04]
>> [ 3.217783] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
>> [ 3.217787] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
>> [ 3.217791] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
>> [ 3.217796] pci 0000:00:14.4: PCI bridge to [bus 05]
>> [ 3.217839] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>> [ 3.217840] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>> [ 3.217842] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 3.217844] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
>> [ 3.217846] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
>> [ 3.217847] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
>> [ 3.217849] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
>> [ 3.217851] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
>> [ 3.217852] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
>> [ 3.217854] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
>> [ 3.217856] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
>> [ 3.217857] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
>> [ 3.217859] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
>> [ 3.217860] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
>> [ 3.217862] pci_bus 0000:00: resource 18 [mem 0xa0000000-0xdfffffff]
>> [ 3.217864] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfed3ffff]
>> [ 3.217865] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xfffdffff]
>> [ 3.217868] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
>> [ 3.217869] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd68fffff]
>> [ 3.217871] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
>> [ 3.217873] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
>> [ 3.217875] pci_bus 0000:02: resource 1 [mem 0xd5800000-0xd67fffff]
>> [ 3.217876] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd17fffff 64bit pref]
>> [ 3.217878] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
>> [ 3.217880] pci_bus 0000:03: resource 1 [mem 0xd4800000-0xd57fffff]
>> [ 3.217882] pci_bus 0000:03: resource 2 [mem 0xd1800000-0xd27fffff 64bit pref]
>> [ 3.217883] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
>> [ 3.217885] pci_bus 0000:04: resource 1 [mem 0xd3800000-0xd47fffff]
>> [ 3.217887] pci_bus 0000:04: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
>> [ 3.217889] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
>> [ 3.217890] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
>> [ 3.217892] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>> [ 3.217894] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
>> [ 3.217895] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
>> [ 3.217897] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
>> [ 3.217899] pci_bus 0000:05: resource 10 [mem 0x000d4000-0x000d7fff]
>> [ 3.217900] pci_bus 0000:05: resource 11 [mem 0x000d8000-0x000dbfff]
>> [ 3.217902] pci_bus 0000:05: resource 12 [mem 0x000dc000-0x000dffff]
>> [ 3.217904] pci_bus 0000:05: resource 13 [mem 0x000e0000-0x000e3fff]
>> [ 3.217905] pci_bus 0000:05: resource 14 [mem 0x000e4000-0x000e7fff]
>> [ 3.217907] pci_bus 0000:05: resource 15 [mem 0x000e8000-0x000ebfff]
>> [ 3.217908] pci_bus 0000:05: resource 16 [mem 0x000ec000-0x000effff]
>> [ 3.217910] pci_bus 0000:05: resource 17 [mem 0x000f0000-0x000fffff]
>> [ 3.217912] pci_bus 0000:05: resource 18 [mem 0xa0000000-0xdfffffff]
>> [ 3.217913] pci_bus 0000:05: resource 19 [mem 0xf0000000-0xfed3ffff]
>> [ 3.217915] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xfffdffff]
>> [ 3.217952] NET: Registered protocol family 2
>> [ 3.218250] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>> [ 3.218529] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> [ 3.218789] TCP: Hash tables configured (established 65536 bind 65536)
>> [ 3.218826] TCP: reno registered
>> [ 3.218843] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>> [ 3.218893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>> [ 3.219011] NET: Registered protocol family 1
>> [ 3.219032] pci 0000:00:01.0: Video device with shadowed ROM
>> [ 3.333351] PCI: CLS mismatch (64 != 32), using 64 bytes
>> [ 3.388911] Trying to unpack rootfs image as initramfs...
>> [ 3.903592] Freeing initrd memory: 31236K (ffff8800342ee000 - ffff88003616f000)
>> [ 3.903713] AMD-Vi: IOMMU performance counters supported
>> [ 3.903958] pci 0000:00:00.2: can't derive routing for PCI INT A
>> [ 3.903961] pci 0000:00:00.2: PCI INT A: no GSI - using ISA IRQ 11
>> [ 3.904316] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
>> [ 3.904318] AMD-Vi: Extended features: PPR GT IA PC
>> [ 3.904323] AMD-Vi: Interrupt remapping enabled
>> [ 3.904355] pci 0000:00:00.2: irq 72 for MSI/MSI-X
>> [ 3.905664] AMD-Vi: Using passthrough domain for device 0000:00:01.0
>> [ 3.919171] AMD-Vi: Using passthrough domain for device 0000:01:00.0
>> [ 3.920903] AMD-Vi: Lazy IO/TLB flushing enabled
>> [ 3.921444] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> [ 3.921448] software IO TLB [mem 0x599b6000-0x5d9b6000] (64MB) mapped at [ffff8800599b6000-ffff88005d9b5fff]
>> [ 3.921781] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
>> [ 3.921785] LVT offset 0 assigned for vector 0x400
>> [ 3.921811] perf: AMD IBS detected (0x000001ff)
>> [ 3.921868] microcode: CPU0: patch_level=0x06003106
>> [ 3.921906] microcode: CPU1: patch_level=0x06003106
>> [ 3.921921] microcode: CPU2: patch_level=0x06003106
>> [ 3.921933] microcode: CPU3: patch_level=0x06003106
>> [ 3.922025] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
>> [ 3.922028] Scanning for low memory corruption every 60 seconds
>> [ 3.922431] Initialise system trusted keyring
>> [ 3.922482] audit: initializing netlink socket (disabled)
>> [ 3.922497] type=2000 audit(1427336001.584:1): initialized
>> [ 3.953477] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [ 3.955197] zbud: loaded
>> [ 3.955429] VFS: Disk quotas dquot_6.5.2
>> [ 3.955478] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> [ 3.956137] fuse init (API version 7.22)
>> [ 3.956256] msgmni has been set to 13712
>> [ 3.956315] Key type big_key registered
>> [ 3.956997] Key type asymmetric registered
>> [ 3.957003] Asymmetric key parser 'x509' registered
>> [ 3.957078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>> [ 3.957153] io scheduler noop registered
>> [ 3.957155] io scheduler deadline registered (default)
>> [ 3.957190] io scheduler cfq registered
>> [ 3.957612] pcieport 0000:00:02.1: irq 73 for MSI/MSI-X
>> [ 3.957974] pcieport 0000:00:03.1: irq 74 for MSI/MSI-X
>> [ 3.958308] pcieport 0000:00:03.2: irq 75 for MSI/MSI-X
>> [ 3.958646] pcieport 0000:00:03.4: irq 76 for MSI/MSI-X
>> [ 3.958745] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
>> [ 3.958748] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>> [ 3.958752] pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
>> [ 3.958770] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
>> [ 3.958772] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
>> [ 3.958776] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
>> [ 3.958795] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
>> [ 3.958797] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
>> [ 3.958801] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
>> [ 3.958818] pcieport 0000:00:03.4: Signaling PME through PCIe PME interrupt
>> [ 3.958820] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
>> [ 3.958823] pcie_pme 0000:00:03.4:pcie01: service driver pcie_pme loaded
>> [ 3.958839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [ 3.958973] pciehp 0000:00:02.1:pcie04: HPC vendor_id 1022 device_id 1425 ss_vid 1022 ss_did 1234
>> [ 3.959075] pciehp 0000:00:02.1:pcie04: service driver pciehp loaded
>> [ 3.959088] pciehp 0000:00:03.2:pcie04: HPC vendor_id 1022 device_id 1426 ss_vid 1022 ss_did 1234
>> [ 3.959122] pciehp 0000:00:03.2:pcie04: service driver pciehp loaded
>> [ 3.959133] pciehp 0000:00:03.4:pcie04: HPC vendor_id 1022 device_id 1426 ss_vid 1022 ss_did 1234
>> [ 3.959163] pciehp 0000:00:03.4:pcie04: service driver pciehp loaded
>> [ 3.959168] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>> [ 3.959229] ipmi message handler version 39.2
>> [ 3.959489] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>> [ 3.959855] ACPI: AC Adapter [AC] (on-line)
>> [ 3.959944] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
>> [ 3.959948] ACPI: Sleep Button [SLPB]
>> [ 3.959986] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>> [ 3.960014] ACPI: Lid Switch [LID]
>> [ 3.960554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>> [ 3.960557] ACPI: Power Button [PWRF]
>> [ 3.960645] ACPI: acpi_idle registered with cpuidle
>> [ 4.002619] thermal LNXTHERM:00: registered as thermal_zone0
>> [ 4.002624] ACPI: Thermal Zone [CPUZ] (47 C)
>> [ 4.042020] thermal LNXTHERM:01: registered as thermal_zone1
>> [ 4.042025] ACPI: Thermal Zone [GFXZ] (0 C)
>> [ 4.063006] thermal LNXTHERM:02: registered as thermal_zone2
>> [ 4.063011] ACPI: Thermal Zone [EXTZ] (0 C)
>> [ 4.085211] thermal LNXTHERM:03: registered as thermal_zone3
>> [ 4.085216] ACPI: Thermal Zone [LOCZ] (0 C)
>> [ 4.107594] thermal LNXTHERM:04: registered as thermal_zone4
>> [ 4.107599] ACPI: Thermal Zone [BATZ] (21 C)
>> [ 4.107699] GHES: HEST is not enabled!
>> [ 4.107861] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>> [ 4.109904] Linux agpgart interface v0.103
>> [ 4.110057] tpm_tis 00:0b: 1.2 TPM (device-id 0x1A, rev-id 16)
>> [ 4.137380] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>> [ 4.137389] ACPI: Battery Slot [BAT0] (battery present)
>> [ 4.410842] brd: module loaded
>> [ 4.411976] loop: module loaded
>> [ 4.412566] libphy: Fixed MDIO Bus: probed
>> [ 4.412673] tun: Universal TUN/TAP device driver, 1.6
>> [ 4.412675] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
>> [ 4.412815] PPP generic driver version 2.4.2
>> [ 4.412914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 4.412927] ehci-pci: EHCI PCI platform driver
>> [ 4.413264] QUIRK: Enable AMD PLL fix
>> [ 4.413304] ehci-pci 0000:00:12.2: EHCI Host Controller
>> [ 4.413312] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
>> [ 4.413318] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>> [ 4.413331] ehci-pci 0000:00:12.2: debug port 1
>> [ 4.413388] ehci-pci 0000:00:12.2: irq 17, io mem 0xd694d000
>> [ 4.424672] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
>> [ 4.424759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 4.424762] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 4.424764] usb usb1: Product: EHCI Host Controller
>> [ 4.424766] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
>> [ 4.424767] usb usb1: SerialNumber: 0000:00:12.2
>> [ 4.425055] hub 1-0:1.0: USB hub found
>> [ 4.425071] hub 1-0:1.0: 5 ports detected
>> [ 4.425731] ehci-pci 0000:00:13.2: EHCI Host Controller
>> [ 4.425739] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
>> [ 4.425744] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>> [ 4.425757] ehci-pci 0000:00:13.2: debug port 1
>> [ 4.425800] ehci-pci 0000:00:13.2: irq 17, io mem 0xd694b000
>> [ 4.436701] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
>> [ 4.436781] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 4.436783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 4.436786] usb usb2: Product: EHCI Host Controller
>> [ 4.436787] usb usb2: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
>> [ 4.436789] usb usb2: SerialNumber: 0000:00:13.2
>> [ 4.437070] hub 2-0:1.0: USB hub found
>> [ 4.437080] hub 2-0:1.0: 5 ports detected
>> [ 4.437316] ehci-platform: EHCI generic platform driver
>> [ 4.437331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 4.437333] ohci-pci: OHCI PCI platform driver
>> [ 4.437698] ohci-pci 0000:00:12.0: OHCI PCI host controller
>> [ 4.437706] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
>> [ 4.437750] ohci-pci 0000:00:12.0: irq 18, io mem 0xd694e000
>> [ 4.496756] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 4.496761] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 4.496763] usb usb3: Product: OHCI PCI host controller
>> [ 4.496765] usb usb3: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
>> [ 4.496767] usb usb3: SerialNumber: 0000:00:12.0
>> [ 4.497066] hub 3-0:1.0: USB hub found
>> [ 4.497082] hub 3-0:1.0: 5 ports detected
>> [ 4.497698] ohci-pci 0000:00:13.0: OHCI PCI host controller
>> [ 4.497707] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
>> [ 4.497730] ohci-pci 0000:00:13.0: irq 18, io mem 0xd694c000
>> [ 4.556771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 4.556776] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 4.556778] usb usb4: Product: OHCI PCI host controller
>> [ 4.556780] usb usb4: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
>> [ 4.556782] usb usb4: SerialNumber: 0000:00:13.0
>> [ 4.557074] hub 4-0:1.0: USB hub found
>> [ 4.557091] hub 4-0:1.0: 5 ports detected
>> [ 4.557556] ohci-pci 0000:00:14.5: OHCI PCI host controller
>> [ 4.557564] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
>> [ 4.557589] ohci-pci 0000:00:14.5: irq 18, io mem 0xd694a000
>> [ 4.616755] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 4.616760] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 4.616763] usb usb5: Product: OHCI PCI host controller
>> [ 4.616764] usb usb5: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
>> [ 4.616766] usb usb5: SerialNumber: 0000:00:14.5
>> [ 4.617065] hub 5-0:1.0: USB hub found
>> [ 4.617081] hub 5-0:1.0: 2 ports detected
>> [ 4.617293] ohci-platform: OHCI generic platform driver
>> [ 4.617309] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 4.617688] xhci_hcd 0000:00:10.0: xHCI Host Controller
>> [ 4.617696] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
>> [ 4.617975] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
>> [ 4.617985] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
>> [ 4.617997] xhci_hcd 0000:00:10.0: irq 79 for MSI/MSI-X
>> [ 4.618006] xhci_hcd 0000:00:10.0: irq 80 for MSI/MSI-X
>> [ 4.618014] xhci_hcd 0000:00:10.0: irq 81 for MSI/MSI-X
>> [ 4.618166] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 4.618168] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 4.618170] usb usb6: Product: xHCI Host Controller
>> [ 4.618172] usb usb6: Manufacturer: Linux 3.13.0-45-generic xhci_hcd
>> [ 4.618173] usb usb6: SerialNumber: 0000:00:10.0
>> [ 4.618351] hub 6-0:1.0: USB hub found
>> [ 4.618394] hub 6-0:1.0: 2 ports detected
>> [ 4.618621] xhci_hcd 0000:00:10.0: xHCI Host Controller
>> [ 4.618625] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
>> [ 4.621412] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
>> [ 4.621414] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 4.621416] usb usb7: Product: xHCI Host Controller
>> [ 4.621418] usb usb7: Manufacturer: Linux 3.13.0-45-generic xhci_hcd
>> [ 4.621420] usb usb7: SerialNumber: 0000:00:10.0
>> [ 4.621573] hub 7-0:1.0: USB hub found
>> [ 4.621615] hub 7-0:1.0: 2 ports detected
>> [ 4.633110] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>> [ 4.635073] i8042: Detected active multiplexing controller, rev 1.1
>> [ 4.636076] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 4.636090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>> [ 4.636124] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>> [ 4.636148] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>> [ 4.636168] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>> [ 4.636414] mousedev: PS/2 mouse device common for all mice
>> [ 4.636737] rtc_cmos 00:06: RTC can wake from S4
>> [ 4.636892] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>> [ 4.636926] rtc_cmos 00:06: alarms up to one month, 114 bytes nvram, hpet irqs
>> [ 4.637018] device-mapper: uevent: version 1.0.3
>> [ 4.637120] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
>> [ 4.637130] ledtrig-cpu: registered to indicate activity on CPUs
>> [ 4.637249] TCP: cubic registered
>> [ 4.637356] NET: Registered protocol family 10
>> [ 4.637570] NET: Registered protocol family 17
>> [ 4.637581] Key type dns_resolver registered
>> [ 4.638291] Loading compiled-in X.509 certificates
>> [ 4.639255] Loaded X.509 cert 'Magrathea: Glacier signing key: 34992139f3da40b620bd5517597ba85af5797c9a'
>> [ 4.639315] registered taskstats version 1
>> [ 4.642587] Key type trusted registered
>> [ 4.644890] Key type encrypted registered
>> [ 4.647127] AppArmor: AppArmor sha1 policy hashing enabled
>> [ 4.661263] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>> [ 4.740749] usb 1-5: new high-speed USB device number 2 using ehci-pci
>> [ 4.920681] tsc: Refined TSC clocksource calibration: 1896.456 MHz
>> [ 4.958887] usb 1-5: New USB device found, idVendor=04ca, idProduct=7022
>> [ 4.958892] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [ 4.958894] usb 1-5: Product: HP HD Webcam
>> [ 4.958896] usb 1-5: Manufacturer: DDZLD01G46C6VD
>> [ 5.164915] usb 5-2: new full-speed USB device number 2 using ohci-pci
>> [ 5.301416] regulator-dummy: disabling
>> [ 5.301628] Magic number: 7:312:208
>> [ 5.301666] vc vcsa: hash matches
>> [ 5.301773] rtc_cmos 00:06: setting system clock to 2015-03-26 02:13:24 UTC (1427336004)
>> [ 5.302010] acpi-cpufreq: overriding BIOS provided _PSD data
>> [ 5.302381] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>> [ 5.302383] EDD information not available.
>> [ 5.302429] PM: Hibernation image not present or could not be loaded.
>> [ 5.303793] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
>> [ 5.303796] Write protecting the kernel read-only data: 12288k
>> [ 5.307400] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
>> [ 5.310568] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
>> [ 5.330890] systemd-udevd[120]: starting version 204
>> [ 5.333939] usb 5-2: New USB device found, idVendor=138a, idProduct=003f
>> [ 5.333945] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>> [ 5.333948] usb 5-2: SerialNumber: 00b0245f4c92
>> [ 5.350932] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
>> [ 5.362327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>> [ 5.362343] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
>> [ 5.364740] ahci 0000:00:11.0: version 3.0
>> [ 5.382556] rtsx_pci 0000:04:00.0: irq 82 for MSI/MSI-X
>> [ 5.382588] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 82
>> [ 5.384471] ahci 0000:00:11.0: irq 83 for MSI/MSI-X
>> [ 5.384483] ahci 0000:00:11.0: irq 84 for MSI/MSI-X
>> [ 5.384492] ahci 0000:00:11.0: irq 85 for MSI/MSI-X
>> [ 5.384500] ahci 0000:00:11.0: irq 86 for MSI/MSI-X
>> [ 5.384508] ahci 0000:00:11.0: irq 87 for MSI/MSI-X
>> [ 5.384516] ahci 0000:00:11.0: irq 88 for MSI/MSI-X
>> [ 5.384523] ahci 0000:00:11.0: irq 89 for MSI/MSI-X
>> [ 5.384581] ahci 0000:00:11.0: irq 90 for MSI/MSI-X
>> [ 5.384665] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>> [ 5.384671] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
>> [ 5.386691] wmi: Mapper loaded
>> [ 5.389019] r8169 0000:02:00.0: irq 91 for MSI/MSI-X
>> [ 5.389259] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000d82000, a0:2b:b8:33:f8:73, XID 10900800 IRQ 91
>> [ 5.389264] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>> [ 5.390055] scsi0 : ahci
>> [ 5.390217] scsi1 : ahci
>> [ 5.390312] ata1: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f100 irq 83
>> [ 5.390317] ata2: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f180 irq 84
>> [ 5.413916] acpi device:01: registered as cooling_device4
>> [ 5.414078] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
>> [ 5.415565] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
>> [ 5.417327] acpi device:0b: registered as cooling_device5
>> [ 5.417475] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input12
>> [ 5.881505] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 5.881536] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>> [ 5.884826] ata1.00: ATA-9: HGST HTS541010A9E680, JA0OA710, max UDMA/133
>> [ 5.884832] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>> [ 5.886380] ata2.00: ATAPI: hp DVDRW SU208FB, HH01, max UDMA/100
>> [ 5.886737] ata1.00: configured for UDMA/133
>> [ 5.886919] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
>> [ 5.887165] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 5.887186] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>> [ 5.887189] sd 0:0:0:0: [sda] 4096-byte physical blocks
>> [ 5.887336] sd 0:0:0:0: [sda] Write Protect is off
>> [ 5.887340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ 5.887394] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 5.889189] ata2.00: configured for UDMA/100
>> [ 5.897466] scsi 1:0:0:0: CD-ROM hp DVDRW SU208FB HH01 PQ: 0 ANSI: 5
>> [ 5.908816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>> [ 5.908823] cdrom: Uniform CD-ROM driver Revision: 3.20
>> [ 5.909057] sr 1:0:0:0: Attached scsi CD-ROM sr0
>> [ 5.909180] sr 1:0:0:0: Attached scsi generic sg1 type 5
>> [ 5.922094] Switched to clocksource tsc
>> [ 5.967577] sda: sda1 sda2 sda3
>> [ 5.968354] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ 6.232351] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2653, fw id: 1481159
>> [ 6.272050] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
>> [ 8.004756] raid6: sse2x1 5891 MB/s
>> [ 8.072758] raid6: sse2x2 8250 MB/s
>> [ 8.140768] raid6: sse2x4 9447 MB/s
>> [ 8.140770] raid6: using algorithm sse2x4 (9447 MB/s)
>> [ 8.140771] raid6: using ssse3x2 recovery algorithm
>> [ 8.142436] xor: automatically using best checksumming function:
>> [ 8.180873] avx : 8733.000 MB/sec
>> [ 8.194646] bio: create slab <bio-1> at 1
>> [ 8.195049] Btrfs loaded
>> [ 8.252847] random: nonblocking pool is initialized
>> [ 8.587973] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>> [ 18.861643] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>> [ 18.913009] Adding 7282684k swap on /dev/sda3. Priority:-1 extents:1 across:7282684k FS
>> [ 19.071730] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 19.215239] systemd-udevd[390]: starting version 204
>> [ 19.608140] lp: driver loaded but no devices found
>> [ 19.627265] ppdev: user-space parallel port driver
>> [ 19.627862] Initializing HPQ6001 module
>> [ 19.627985] input: HP Wireless hotkeys as /devices/virtual/input/input14
>> [ 19.643350] hp_accel: laptop model unknown, using default axes configuration
>> [ 19.680011] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel-5C7GfCeVMHo@public.gmane.org>
>> [ 19.687318] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>> [ 19.690260] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>> [ 19.690266] Disabling lock debugging due to kernel taint
>> [ 19.728330] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBO 1 (20131115/utaddress-251)
>> [ 19.728340] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>> [ 19.768562] fglrx: module verification failed: signature and/or required key missing - tainting kernel
>> [ 19.773139] lis3lv02d: 8 bits 3DC sensor found
>> [ 19.776807] cfg80211: Calling CRDA to update world regulatory domain
>> [ 19.797615] <6>[fglrx] Maximum main memory to use for locked dma buffers: 6645 MBytes.
>> [ 19.797828] <6>[fglrx] vendor: 1002 device: 130a count: 1
>> [ 19.798035] MCE: In-kernel MCE decoding enabled.
>> [ 19.798729] <6>[fglrx] vendor: 1002 device: 6901 count: 2
>> [ 19.798909] <6>[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
>> [ 19.798912] <6>[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
>> [ 19.801933] EDAC MC: Ver: 3.0.0
>> [ 19.807269] AMD64 EDAC driver v3.4.0
>> [ 19.807328] EDAC amd64: DRAM ECC disabled.
>> [ 19.807339] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>> [ 19.807339] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>> [ 19.807339] (Note that use of the override may cause unknown side effects.)
>> [ 19.808563] <6>[fglrx] ioport: bar 4, base 0x6000, size: 0x100
>> [ 19.810011] <6>[fglrx] ioport: bar 4, base 0x5000, size: 0x100
>> [ 19.810324] <6>[fglrx] Kernel PAT support is enabled
>> [ 19.810371] <6>[fglrx] module loaded - fglrx 14.30.4 [Feb 27 2015] with 2 minors
>> [ 19.828188] snd_hda_intel 0000:00:01.1: Probing card using HDA DKMS, version 0.201503121632~ubuntu14.04.1
>> [ 19.828971] snd_hda_intel 0000:00:01.1: irq 92 for MSI/MSI-X
>> [ 19.829085] snd_hda_intel 0000:00:14.2: Probing card using HDA DKMS, version 0.201503121632~ubuntu14.04.1
>> [ 19.845203] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
>> [ 19.856058] sound hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>> [ 19.856072] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>> [ 19.856076] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>> [ 19.856080] sound hdaudioC1D0: mono: mono_out=0x0
>> [ 19.856083] sound hdaudioC1D0: inputs:
>> [ 19.856087] sound hdaudioC1D0: Mic=0x19
>> [ 19.856090] sound hdaudioC1D0: Internal Mic=0x12
>> [ 19.868511] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
>> [ 19.879618] ath: phy0: Enable LNA combining
>> [ 19.880803] ath: EEPROM regdomain: 0x60
>> [ 19.880806] ath: EEPROM indicates we should expect a direct regpair map
>> [ 19.880810] ath: Country alpha2 being used: 00
>> [ 19.880812] ath: Regpair used: 0x60
>> [ 19.892797] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>> [ 19.893013] device-mapper: multipath: version 1.6.0 loaded
>> [ 19.893403] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90011f00000, irq=36
>> [ 19.936777] kvm: Nested Virtualization enabled
>> [ 19.936783] kvm: Nested Paging enabled
>> [ 19.954827] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
>> [ 19.956095] serio_raw serio3: raw access enabled on isa0060/serio3 (serio_raw0, minor 57)
>> [ 20.124406] Bluetooth: Core ver 2.17
>> [ 20.124431] NET: Registered protocol family 31
>> [ 20.124434] Bluetooth: HCI device and connection manager initialized
>> [ 20.124445] Bluetooth: HCI socket layer initialized
>> [ 20.124448] Bluetooth: L2CAP socket layer initialized
>> [ 20.124453] Bluetooth: SCO socket layer initialized
>> [ 20.129080] Bluetooth: RFCOMM TTY layer initialized
>> [ 20.129096] Bluetooth: RFCOMM socket layer initialized
>> [ 20.129104] Bluetooth: RFCOMM ver 1.11
>> [ 20.130702] type=1400 audit(1427336019.324:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
>> [ 20.130711] type=1400 audit(1427336019.324:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
>> [ 20.130718] type=1400 audit(1427336019.324:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
>> [ 20.131283] type=1400 audit(1427336019.324:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
>> [ 20.131292] type=1400 audit(1427336019.324:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
>> [ 20.131393] type=1400 audit(1427336019.324:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=586 comm="apparmor_parser"
>> [ 20.131404] type=1400 audit(1427336019.324:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=586 comm="apparmor_parser"
>> [ 20.131569] type=1400 audit(1427336019.324:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
>> [ 20.131598] type=1400 audit(1427336019.324:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=727 comm="apparmor_parser"
>> [ 20.131605] type=1400 audit(1427336019.324:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=727 comm="apparmor_parser"
>> [ 20.214199] input: HP WMI hotkeys as /devices/virtual/input/input18
>> [ 20.357194] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>> [ 20.357201] Bluetooth: BNEP filters: protocol multicast
>> [ 20.357214] Bluetooth: BNEP socket layer initialized
>> [ 20.386096] init: failsafe main process (749) killed by TERM signal
>> [ 20.484775] init: cups main process (729) killed by HUP signal
>> [ 20.484793] init: cups main process ended, respawning
>> [ 20.681703] cfg80211: World regulatory domain updated:
>> [ 20.681709] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 20.681712] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 20.681714] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 20.681716] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 20.681718] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 20.681719] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 21.336724] Linux video capture interface: v2.00
>> [ 21.343710] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7022)
>> [ 21.352224] input: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input19
>> [ 21.352314] usbcore: registered new interface driver uvcvideo
>> [ 21.352315] USB Video Class driver (1.1.1)
>> [ 21.598069] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input20
>> [ 21.924076] r8169 0000:02:00.0 eth0: link down
>> [ 21.924176] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 21.924702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 21.934849] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
>> [ 21.942180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 21.945851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 22.276988] thinkpad_ec: no ThinkPad embedded controller!
>> [ 23.110635] wlan0: authenticate with 3c:ce:73:48:04:80
>> [ 23.128143] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
>> [ 24.142159] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
>> [ 24.549478] fglrx_pci 0000:00:01.0: irq 93 for MSI/MSI-X
>> [ 24.550294] <6>[fglrx] Firegl kernel thread PID: 1377
>> [ 24.550423] <6>[fglrx] Firegl kernel thread PID: 1378
>> [ 24.550505] <6>[fglrx] Firegl kernel thread PID: 1379
>> [ 24.550622] <6>[fglrx] IRQ 93 Enabled
>> [ 24.556703] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
>> [ 24.556707] <6>[fglrx] Reserved FB block: Unshared offset:fa38000, size:4000
>> [ 24.556708] <6>[fglrx] Reserved FB block: Unshared offset:fa3c000, size:4c4000
>> [ 24.556710] <6>[fglrx] Reserved FB block: Unshared offset:ff00000, size:100000
>> [ 24.556711] <6>[fglrx] Reserved FB block: Unshared offset:3ffd7000, size:29000
>> [ 24.583673] vgaarb: this pci device is not a vga device
>> [ 24.799197] fglrx_pci 0000:01:00.0: irq 94 for MSI/MSI-X
>> [ 24.799981] <6>[fglrx] Firegl kernel thread PID: 1382
>> [ 24.800134] <6>[fglrx] Firegl kernel thread PID: 1383
>> [ 24.800240] <6>[fglrx] Firegl kernel thread PID: 1384
>> [ 24.800366] <6>[fglrx] IRQ 94 Enabled
>> [ 24.814629] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
>> [ 24.814634] <6>[fglrx] Reserved FB block: Unshared offset:f7fa000, size:1000
>> [ 24.814636] <6>[fglrx] Reserved FB block: Unshared offset:f7fb000, size:4000
>> [ 24.814637] <6>[fglrx] Reserved FB block: Unshared offset:f7ff000, size:501000
>> [ 24.814639] <6>[fglrx] Reserved FB block: Unshared offset:3ff5e000, size:a2000
>> [ 24.845659] <6>[fglrx] ATIF platform detected with notification ID: 0xd0
>> [ 24.848799] <6>[fglrx] ATIF platform detected with notification ID: 0xd0
>> [ 25.082126] vgaarb: this pci device is not a vga device
>> [ 25.133458] wlan0: authenticated
>> [ 25.146376] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
>> [ 26.130537] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
>> [ 26.794642] init: plymouth-upstart-bridge main process ended, respawning
>> [ 27.149671] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
>> [ 27.149824] wlan0: associated
>> [ 27.149841] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>> [ 27.149969] cfg80211: Calling CRDA for country: TW
>> [ 27.150099] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
>> [ 27.153547] ath: EEPROM regdomain: 0x809e
>> [ 27.153554] ath: EEPROM indicates we should expect a country code
>> [ 27.153556] ath: doing EEPROM country->regdmn map search
>> [ 27.153558] ath: country maps to regdmn code: 0x50
>> [ 27.153559] ath: Country alpha2 being used: TW
>> [ 27.153560] ath: Regpair used: 0x50
>> [ 27.153562] ath: regdomain 0x809e dynamically updated by country IE
>> [ 27.153581] cfg80211: Regulatory domain changed to country: TW
>> [ 27.153583] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 27.153584] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>> [ 27.153586] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>> [ 27.153588] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>> [ 27.158961] cfg80211: Calling CRDA to update world regulatory domain
>> [ 27.165685] cfg80211: World regulatory domain updated:
>> [ 27.165692] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 27.165699] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 27.165701] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 27.165704] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 27.165706] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 27.165708] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 31.304710] wlan0: authenticate with 3c:ce:73:48:04:80
>> [ 31.321349] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
>> [ 32.130956] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
>> [ 32.326073] wlan0: authenticated
>> [ 32.339865] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
>> [ 33.143085] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
>> [ 34.119143] wlan0: associate with 3c:ce:73:48:04:80 (try 3/3)
>> [ 34.342402] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
>> [ 34.342565] wlan0: associated
>> [ 34.342778] cfg80211: Calling CRDA for country: TW
>> [ 34.342809] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
>> [ 34.348160] ath: EEPROM regdomain: 0x809e
>> [ 34.348167] ath: EEPROM indicates we should expect a country code
>> [ 34.348169] ath: doing EEPROM country->regdmn map search
>> [ 34.348171] ath: country maps to regdmn code: 0x50
>> [ 34.348173] ath: Country alpha2 being used: TW
>> [ 34.348175] ath: Regpair used: 0x50
>> [ 34.348177] ath: regdomain 0x809e dynamically updated by country IE
>> [ 34.348198] cfg80211: Regulatory domain changed to country: TW
>> [ 34.348200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 34.348202] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>> [ 34.348205] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>> [ 34.348206] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>> [ 34.355440] cfg80211: Calling CRDA to update world regulatory domain
>> [ 34.356156] wlan0: authenticate with 3c:ce:73:48:04:80
>> [ 34.366285] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
>> [ 34.366462] cfg80211: World regulatory domain updated:
>> [ 34.366466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 34.366468] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 34.366471] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 34.366473] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 34.366475] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 34.366477] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 35.155055] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
>> [ 36.119366] wlan0: send auth to 3c:ce:73:48:04:80 (try 3/3)
>> [ 36.370298] wlan0: authenticated
>> [ 36.383351] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
>> [ 37.155284] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
>> [ 38.119556] wlan0: associate with 3c:ce:73:48:04:80 (try 3/3)
>> [ 38.386778] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=14)
>> [ 38.386939] wlan0: associated
>> [ 38.387061] cfg80211: Calling CRDA for country: TW
>> [ 38.387213] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23)
>> [ 38.392236] ath: EEPROM regdomain: 0x809e
>> [ 38.392243] ath: EEPROM indicates we should expect a country code
>> [ 38.392245] ath: doing EEPROM country->regdmn map search
>> [ 38.392247] ath: country maps to regdmn code: 0x50
>> [ 38.392249] ath: Country alpha2 being used: TW
>> [ 38.392251] ath: Regpair used: 0x50
>> [ 38.392253] ath: regdomain 0x809e dynamically updated by country IE
>> [ 38.392274] cfg80211: Regulatory domain changed to country: TW
>> [ 38.392276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 38.392278] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>> [ 38.392280] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>> [ 38.392282] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>> [ 38.404049] cfg80211: Calling CRDA to update world regulatory domain
>> [ 38.411033] cfg80211: World regulatory domain updated:
>> [ 38.411039] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>> [ 38.411041] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 38.411043] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 38.411045] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>> [ 38.411047] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 38.411049] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>> [ 39.539948] systemd-hostnamed[1844]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
>
[-- Attachment #2: dmesg_iommu_dump.log --]
[-- Type: text/x-log, Size: 68553 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-040000rc5-generic (kernel@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201503230035 SMP Mon Mar 23 04:36:26 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-040000rc5-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] tseg: 005f000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005d9b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005d9b6000-0x000000005e8b1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005e8b2000-0x000000005efb1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005efb2000-0x000000005effefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005efff000-0x000000005effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ProBook 445G2/2234, BIOS M75 Ver. 01.07 09/16/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000FF800000 mask FFFFFF800000 write-protect
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000025f000000 aka 9712M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0x5f000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fcd000, 0x01fcdfff] PGTABLE
[ 0.000000] BRK [0x01fce000, 0x01fcefff] PGTABLE
[ 0.000000] BRK [0x01fcf000, 0x01fcffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25ee00000-0x25effffff]
[ 0.000000] [mem 0x25ee00000-0x25effffff] page 2M
[ 0.000000] BRK [0x01fd0000, 0x01fd0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x25edfffff]
[ 0.000000] [mem 0x240000000-0x25edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5d9b5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x5d7fffff] page 2M
[ 0.000000] [mem 0x5d800000-0x5d9b5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x5efff000-0x5effffff]
[ 0.000000] [mem 0x5efff000-0x5effffff] page 4k
[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x33f4e000-0x35f9efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2F90 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000005EFFD0E8 00009C (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000005EFFB000 00010C (v05 HPQOEM 180F 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 0x000000005EFD8000 01E7AD (v01 HPQOEM 180F 00000001 INTL 20130927)
[ 0.000000] ACPI: FACS 0x000000005ED69000 000040
[ 0.000000] ACPI: HPET 0x000000005EFFA000 000038 (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x000000005EFF9000 000090 (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x000000005EFF8000 00003C (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x000000005EFF7000 000032 (v02 HPQOEM 180F 00000000 HP 00000001)
[ 0.000000] ACPI: FPDT 0x000000005EFD5000 000044 (v01 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0x000000005EFD4000 000038 (v00 HPQOEM 180F 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000005EFD3000 000B9C (v01 AMD BALLINA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000005EFC9000 009399 (v02 AMD BALLINA 00000002 MSFT 04000000)
[ 0.000000] ACPI: IVRS 0x000000005EFC8000 000078 (v02 AMD BALLINA 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 0x000000005EFC7000 000550 (v01 AMD BALLINA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000005EFC6000 000789 (v01 HP AMDSGTBL 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000005EFC5000 000325 (v01 HP HPZPODDT 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000005EFC4000 00081B (v01 AMD CPMADPS4 00000001 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000005EFC2000 001207 (v01 AMD CPMCMN 00000001 INTL 20130927)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25eff9000-0x25effdfff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257600000-ffff88025e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000005d9b5fff]
[ 0.000000] node 0: [mem 0x000000005efff000-0x000000005effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[ 0.000000] On node 0 totalpages: 1821012
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5927 pages used for memmap
[ 0.000000] DMA32 zone: 379319 pages, LIFO batch:31
[ 0.000000] Normal zone: 22464 pages used for memmap
[ 0.000000] Normal zone: 1437696 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5d9b6000-0x5e8b1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5e8b2000-0x5efb1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5efb2000-0x5effefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x5f000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88025ec00000 s91032 r8192 d31848 u524288
[ 0.000000] pcpu-alloc: s91032 r8192 d31848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1792536
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-040000rc5-generic root=UUID=6224a1c4-824b-41b2-9077-700edb8586ad ro amd_iommu_dump quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0x54000000-0x57ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0x54000000-0x57ffffff]
[ 0.000000] Memory: 6987596K/7284048K available (8134K kernel code, 1136K rwdata, 3912K rodata, 1420K init, 1292K bss, 296452K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:1000 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1896.460 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 3792.92 BogoMIPS (lpj=7585840)
[ 0.000035] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20150204
[ 0.018728] ACPI: All ACPI Tables successfully acquired
[ 0.057493] Security Framework initialized
[ 0.057520] AppArmor: AppArmor initialized
[ 0.057522] Yama: becoming mindful.
[ 0.058348] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.061346] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.062664] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.062680] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.063008] Initializing cgroup subsys blkio
[ 0.063014] Initializing cgroup subsys memory
[ 0.063025] Initializing cgroup subsys devices
[ 0.063031] Initializing cgroup subsys freezer
[ 0.063034] Initializing cgroup subsys net_cls
[ 0.063038] Initializing cgroup subsys perf_event
[ 0.063041] Initializing cgroup subsys net_prio
[ 0.063044] Initializing cgroup subsys hugetlb
[ 0.063076] CPU: Physical Processor ID: 0
[ 0.063077] CPU: Processor Core ID: 0
[ 0.063079] mce: CPU supports 7 MCE banks
[ 0.063087] LVT offset 1 assigned for vector 0xf9
[ 0.063096] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.063098] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.063222] Freeing SMP alternatives memory: 28K (ffffffff81e81000 - ffffffff81e88000)
[ 0.064718] ftrace: allocating 33093 entries in 130 pages
[ 0.080177] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
[ 0.080181] AMD-Vi: mmio-addr: 00000000feb80000
[ 0.080198] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
[ 0.080200] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
[ 0.081192] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
[ 0.081194] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
[ 0.081204] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
[ 0.081207] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
[ 0.081208] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
[ 0.279770] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.427444] smpboot: CPU0: AMD A10-7300 Radeon R6, 10 Compute Cores 4C+6G (fam: 15, model: 30, stepping: 01)
[ 0.427480] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.427487] ... version: 0
[ 0.427489] ... bit width: 48
[ 0.427490] ... generic registers: 6
[ 0.427492] ... value mask: 0000ffffffffffff
[ 0.427493] ... max period: 00007fffffffffff
[ 0.427494] ... fixed-purpose events: 0
[ 0.427495] ... event mask: 000000000000003f
[ 0.428410] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.428536] x86: Booting SMP configuration:
[ 0.428538] .... node #0, CPUs: #1 #2 #3
[ 0.468316] x86: Booted up 1 node, 4 CPUs
[ 0.468321] smpboot: Total of 4 processors activated (15171.68 BogoMIPS)
[ 0.469571] devtmpfs: initialized
[ 0.479694] evm: security.selinux
[ 0.479696] evm: security.SMACK64
[ 0.479698] evm: security.SMACK64EXEC
[ 0.479700] evm: security.SMACK64TRANSMUTE
[ 0.479701] evm: security.SMACK64MMAP
[ 0.479702] evm: security.ima
[ 0.479704] evm: security.capability
[ 0.479928] PM: Registering ACPI NVS region [mem 0x5e8b2000-0x5efb1fff] (7340032 bytes)
[ 0.480340] pinctrl core: initialized pinctrl subsystem
[ 0.480563] RTC time: 0:43:20, date: 03/27/15
[ 0.480746] NET: Registered protocol family 16
[ 0.487037] cpuidle: using governor ladder
[ 0.491040] cpuidle: using governor menu
[ 0.491280] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.491283] ACPI: bus type PCI registered
[ 0.491286] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.491495] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.491499] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.491963] PCI: Using configuration type 1 for base access
[ 0.492349] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.492351] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.492352] mtrr: probably your BIOS does not setup all CPUs.
[ 0.492353] mtrr: corrected configuration.
[ 0.499525] ACPI: Added _OSI(Module Device)
[ 0.499530] ACPI: Added _OSI(Processor Device)
[ 0.499532] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.499534] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.100193] ACPI: Interpreter enabled
[ 3.100216] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 3.100224] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 3.100248] ACPI: (supports S0 S3 S4 S5)
[ 3.100251] ACPI: Using IOAPIC for interrupt routing
[ 3.100622] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.105007] ACPI: Power Resource [APPR] (off)
[ 3.113782] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 3.114276] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 3.114285] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.114820] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.114961] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf5ff])
[ 3.114964] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 3.115258] PCI host bridge to bus 0000:00
[ 3.115262] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.115265] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.115267] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 3.115269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.115271] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 3.115273] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 3.115275] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 3.115277] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 3.115278] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 3.115280] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 3.115282] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 3.115283] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 3.115285] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 3.115287] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 3.115289] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 3.115290] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[ 3.115292] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[ 3.115294] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfffdffff window]
[ 3.115303] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 3.115484] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 3.115725] pci 0000:00:01.0: [1002:130a] type 00 class 0x030000
[ 3.115741] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 3.115752] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 3.115759] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff]
[ 3.115767] pci 0000:00:01.0: reg 0x24: [mem 0xd6900000-0xd693ffff]
[ 3.115774] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 3.115824] pci 0000:00:01.0: supports D1 D2
[ 3.115826] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 3.115947] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[ 3.115962] pci 0000:00:01.1: reg 0x10: [mem 0xd6940000-0xd6943fff 64bit]
[ 3.116030] pci 0000:00:01.1: supports D1 D2
[ 3.116185] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 3.116303] pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
[ 3.116385] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 3.116569] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 3.116693] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[ 3.116770] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 3.116826] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 3.116876] pci 0000:00:03.2: [1022:1426] type 01 class 0x060400
[ 3.116953] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 3.117008] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 3.117119] pci 0000:00:03.4: [1022:1426] type 01 class 0x060400
[ 3.117196] pci 0000:00:03.4: PME# supported from D0 D3hot D3cold
[ 3.117250] pci 0000:00:03.4: System wakeup disabled by ACPI
[ 3.117356] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 3.117524] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 3.117550] pci 0000:00:10.0: reg 0x10: [mem 0xd6948000-0xd6949fff 64bit]
[ 3.117666] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 3.117725] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 3.117816] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 3.117837] pci 0000:00:11.0: reg 0x10: [io 0x6118-0x611f]
[ 3.117847] pci 0000:00:11.0: reg 0x14: [io 0x6124-0x6127]
[ 3.117878] pci 0000:00:11.0: reg 0x18: [io 0x6110-0x6117]
[ 3.117889] pci 0000:00:11.0: reg 0x1c: [io 0x6120-0x6123]
[ 3.117899] pci 0000:00:11.0: reg 0x20: [io 0x6100-0x610f]
[ 3.117911] pci 0000:00:11.0: reg 0x24: [mem 0xd694f000-0xd694f7ff]
[ 3.118089] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 3.118105] pci 0000:00:12.0: reg 0x10: [mem 0xd694e000-0xd694efff]
[ 3.118273] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 3.118368] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 3.118390] pci 0000:00:12.2: reg 0x10: [mem 0xd694d000-0xd694d0ff]
[ 3.118484] pci 0000:00:12.2: supports D1 D2
[ 3.118486] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.118544] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 3.118633] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 3.118649] pci 0000:00:13.0: reg 0x10: [mem 0xd694c000-0xd694cfff]
[ 3.118808] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 3.118912] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 3.118933] pci 0000:00:13.2: reg 0x10: [mem 0xd694b000-0xd694b0ff]
[ 3.119023] pci 0000:00:13.2: supports D1 D2
[ 3.119025] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.119074] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 3.119156] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 3.119342] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 3.119366] pci 0000:00:14.2: reg 0x10: [mem 0xd6944000-0xd6947fff 64bit]
[ 3.119438] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 3.119487] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 3.119586] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 3.119780] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 3.119934] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 3.119949] pci 0000:00:14.5: reg 0x10: [mem 0xd694a000-0xd694afff]
[ 3.120133] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 3.120231] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 3.120328] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 3.120425] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 3.120537] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 3.120638] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 3.120914] pci 0000:01:00.0: [1002:6901] type 00 class 0x038000
[ 3.120950] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 3.120974] pci 0000:01:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref]
[ 3.120990] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff]
[ 3.121007] pci 0000:01:00.0: reg 0x24: [mem 0xd6800000-0xd683ffff]
[ 3.121023] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 3.121154] pci 0000:01:00.0: supports D1 D2
[ 3.128619] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 3.128630] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
[ 3.128634] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
[ 3.128640] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[ 3.128809] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 3.128839] pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 3.128870] pci 0000:02:00.0: reg 0x18: [mem 0xd5804000-0xd5804fff 64bit]
[ 3.128892] pci 0000:02:00.0: reg 0x20: [mem 0xd5800000-0xd5803fff 64bit]
[ 3.129013] pci 0000:02:00.0: supports D1 D2
[ 3.129015] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.129080] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 3.136639] pci 0000:00:03.1: PCI bridge to [bus 02]
[ 3.136650] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
[ 3.136655] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
[ 3.136661] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
[ 3.136845] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 3.136874] pci 0000:03:00.0: reg 0x10: [mem 0xd4800000-0xd487ffff 64bit]
[ 3.136922] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 3.137001] pci 0000:03:00.0: supports D1 D2
[ 3.137003] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.144616] pci 0000:00:03.2: PCI bridge to [bus 03]
[ 3.144627] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
[ 3.144632] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
[ 3.144637] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
[ 3.144813] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
[ 3.144856] pci 0000:04:00.0: reg 0x10: [mem 0xd3800000-0xd3800fff]
[ 3.145002] pci 0000:04:00.0: supports D1 D2
[ 3.145004] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[ 3.152624] pci 0000:00:03.4: PCI bridge to [bus 04]
[ 3.152635] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
[ 3.152640] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
[ 3.152646] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[ 3.152829] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 3.152840] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 3.152842] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 3.152844] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 3.152846] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 3.152848] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 3.152850] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 3.152852] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 3.152854] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 3.152856] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 3.152857] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 3.152859] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 3.152861] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 3.152863] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 3.152864] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 3.152866] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xdfffffff window] (subtractive decode)
[ 3.152868] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed3ffff window] (subtractive decode)
[ 3.152870] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xfffdffff window] (subtractive decode)
[ 3.152922] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 3.154534] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.154644] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.154756] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.154865] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.154993] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.155052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.155113] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.155176] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 3.155451] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 3.155562] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 3.155765] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 3.155768] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.155780] vgaarb: loaded
[ 3.155782] vgaarb: bridge control possible 0000:00:01.0
[ 3.156144] SCSI subsystem initialized
[ 3.156428] libata version 3.00 loaded.
[ 3.156510] ACPI: bus type USB registered
[ 3.156542] usbcore: registered new interface driver usbfs
[ 3.156559] usbcore: registered new interface driver hub
[ 3.156602] usbcore: registered new device driver usb
[ 3.156835] PCI: Using ACPI for IRQ routing
[ 3.165941] PCI: pci_cache_line_size set to 64 bytes
[ 3.166048] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 3.166051] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 3.166053] e820: reserve RAM buffer [mem 0x5d9b6000-0x5fffffff]
[ 3.166055] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
[ 3.166057] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 3.166238] NetLabel: Initializing
[ 3.166240] NetLabel: domain hash size = 128
[ 3.166242] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.166259] NetLabel: unlabeled traffic allowed by default
[ 3.166448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 3.166454] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 3.168713] Switched to clocksource hpet
[ 3.177921] AppArmor: AppArmor Filesystem Enabled
[ 3.178015] pnp: PnP ACPI init
[ 3.178172] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 3.178175] system 00:00: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 3.178178] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 3.178180] system 00:00: [mem 0xfec20000-0xfec20fff] could not be reserved
[ 3.178182] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 3.178186] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.178509] system 00:01: [io 0x0400-0x04cf] could not be reserved
[ 3.178512] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 3.178514] system 00:01: [io 0x04d6] has been reserved
[ 3.178516] system 00:01: [io 0x0680-0x06ff] has been reserved
[ 3.178518] system 00:01: [io 0x077a] has been reserved
[ 3.178520] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 3.178522] system 00:01: [io 0x0c14] has been reserved
[ 3.178524] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 3.178526] system 00:01: [io 0x0c6c] has been reserved
[ 3.178527] system 00:01: [io 0x0c6f] has been reserved
[ 3.178529] system 00:01: [io 0x0cd0-0x0cdb] has been reserved
[ 3.178531] system 00:01: [io 0x0220-0x0227] has been reserved
[ 3.178533] system 00:01: [io 0x0260-0x0273] has been reserved
[ 3.178535] system 00:01: [io 0x0800] has been reserved
[ 3.178537] system 00:01: [io 0x0804] has been reserved
[ 3.178539] system 00:01: [io 0x087f] has been reserved
[ 3.178541] system 00:01: [io 0x0cdc-0x0cdf] has been reserved
[ 3.178543] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 3.178545] system 00:01: [io 0x0200-0x027f] could not be reserved
[ 3.178547] system 00:01: [io 0x1770-0x1777] has been reserved
[ 3.178550] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.178635] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[ 3.178638] system 00:02: [mem 0x00100000-0x9fffffff] could not be reserved
[ 3.178640] system 00:02: [mem 0xffe00000-0xffffffff] could not be reserved
[ 3.178643] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 3.178772] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.178854] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 3.178893] pnp 00:05: Plug and Play ACPI device, IDs SYN301c SYN0100 SYN0002 PNP0f13 (active)
[ 3.179309] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 3.179548] pnp: PnP ACPI: found 7 devices
[ 3.187336] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 3.187340] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 3.187343] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 3.187419] pci 0000:00:01.0: BAR 6: assigned [mem 0xb0200000-0xb021ffff pref]
[ 3.187423] pci 0000:01:00.0: BAR 6: assigned [mem 0xd6840000-0xd685ffff pref]
[ 3.187426] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 3.187430] pci 0000:00:02.1: bridge window [io 0x5000-0x5fff]
[ 3.187434] pci 0000:00:02.1: bridge window [mem 0xd6800000-0xd68fffff]
[ 3.187438] pci 0000:00:02.1: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[ 3.187443] pci 0000:00:03.1: PCI bridge to [bus 02]
[ 3.187446] pci 0000:00:03.1: bridge window [io 0x4000-0x4fff]
[ 3.187450] pci 0000:00:03.1: bridge window [mem 0xd5800000-0xd67fffff]
[ 3.187454] pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd17fffff 64bit pref]
[ 3.187460] pci 0000:03:00.0: BAR 6: assigned [mem 0xd4880000-0xd488ffff pref]
[ 3.187462] pci 0000:00:03.2: PCI bridge to [bus 03]
[ 3.187464] pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
[ 3.187468] pci 0000:00:03.2: bridge window [mem 0xd4800000-0xd57fffff]
[ 3.187472] pci 0000:00:03.2: bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
[ 3.187477] pci 0000:00:03.4: PCI bridge to [bus 04]
[ 3.187479] pci 0000:00:03.4: bridge window [io 0x2000-0x2fff]
[ 3.187483] pci 0000:00:03.4: bridge window [mem 0xd3800000-0xd47fffff]
[ 3.187487] pci 0000:00:03.4: bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
[ 3.187492] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 3.187536] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 3.187538] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 3.187540] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.187542] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 3.187543] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 3.187545] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 3.187547] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 3.187549] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 3.187550] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[ 3.187552] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 3.187554] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 3.187555] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 3.187557] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[ 3.187559] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[ 3.187560] pci_bus 0000:00: resource 18 [mem 0xa0000000-0xdfffffff window]
[ 3.187562] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfed3ffff window]
[ 3.187564] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xfffdffff window]
[ 3.187566] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 3.187567] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd68fffff]
[ 3.187569] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
[ 3.187571] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 3.187573] pci_bus 0000:02: resource 1 [mem 0xd5800000-0xd67fffff]
[ 3.187574] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd17fffff 64bit pref]
[ 3.187576] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 3.187578] pci_bus 0000:03: resource 1 [mem 0xd4800000-0xd57fffff]
[ 3.187580] pci_bus 0000:03: resource 2 [mem 0xd1800000-0xd27fffff 64bit pref]
[ 3.187581] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 3.187583] pci_bus 0000:04: resource 1 [mem 0xd3800000-0xd47fffff]
[ 3.187585] pci_bus 0000:04: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
[ 3.187587] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 3.187589] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 3.187590] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.187592] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 3.187594] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 3.187596] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 3.187597] pci_bus 0000:05: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 3.187599] pci_bus 0000:05: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 3.187601] pci_bus 0000:05: resource 12 [mem 0x000dc000-0x000dffff window]
[ 3.187602] pci_bus 0000:05: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 3.187604] pci_bus 0000:05: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 3.187606] pci_bus 0000:05: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 3.187607] pci_bus 0000:05: resource 16 [mem 0x000ec000-0x000effff window]
[ 3.187609] pci_bus 0000:05: resource 17 [mem 0x000f0000-0x000fffff window]
[ 3.187611] pci_bus 0000:05: resource 18 [mem 0xa0000000-0xdfffffff window]
[ 3.187613] pci_bus 0000:05: resource 19 [mem 0xf0000000-0xfed3ffff window]
[ 3.187614] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xfffdffff window]
[ 3.187655] NET: Registered protocol family 2
[ 3.187917] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.188197] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.188473] TCP: Hash tables configured (established 65536 bind 65536)
[ 3.188513] TCP: reno registered
[ 3.188533] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.188583] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.188692] NET: Registered protocol family 1
[ 3.188800] pci 0000:00:01.0: Video device with shadowed ROM
[ 3.301761] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 3.357339] Trying to unpack rootfs image as initramfs...
[ 3.903160] Freeing initrd memory: 33092K (ffff880033f4e000 - ffff880035f9f000)
[ 3.903191] AMD-Vi: IOMMU performance counters supported
[ 3.903498] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 3.903501] pci 0000:00:00.2: PCI INT A: no GSI
[ 3.904442] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 3.904443] AMD-Vi: Extended features: PPR GT IA PC
[ 3.904448] AMD-Vi: Interrupt remapping enabled
[ 3.905872] AMD-Vi: Using passthrough domain for device 0000:00:01.0
[ 3.918798] AMD-Vi: Using passthrough domain for device 0000:01:00.0
[ 3.920533] AMD-Vi: Lazy IO/TLB flushing enabled
[ 3.921155] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.921159] software IO TLB [mem 0x599b6000-0x5d9b6000] (64MB) mapped at [ffff8800599b6000-ffff88005d9b5fff]
[ 3.921657] perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
[ 3.921757] microcode: CPU0: patch_level=0x06003106
[ 3.921763] microcode: CPU1: patch_level=0x06003106
[ 3.921776] microcode: CPU2: patch_level=0x06003106
[ 3.921790] microcode: CPU3: patch_level=0x06003106
[ 3.921904] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.921910] LVT offset 0 assigned for vector 0x400
[ 3.921928] perf: AMD IBS detected (0x000001ff)
[ 3.921961] Scanning for low memory corruption every 60 seconds
[ 3.922516] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.922541] Initialise system trusted keyring
[ 3.922567] audit: initializing netlink subsys (disabled)
[ 3.922599] audit: type=2000 audit(1427417002.584:1): initialized
[ 3.923298] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 3.923300] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.925885] zpool: loaded
[ 3.925888] zbud: loaded
[ 3.926317] VFS: Disk quotas dquot_6.5.2
[ 3.926369] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.927347] fuse init (API version 7.23)
[ 3.927581] Key type big_key registered
[ 3.928144] Key type asymmetric registered
[ 3.928148] Asymmetric key parser 'x509' registered
[ 3.928202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.928287] io scheduler noop registered
[ 3.928291] io scheduler deadline registered (default)
[ 3.928339] io scheduler cfq registered
[ 3.929855] pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
[ 3.929858] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.929863] pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
[ 3.929882] pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
[ 3.929885] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.929889] pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
[ 3.929907] pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
[ 3.929910] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.929913] pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
[ 3.929936] pcieport 0000:00:03.4: Signaling PME through PCIe PME interrupt
[ 3.929938] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 3.929942] pcie_pme 0000:00:03.4:pcie01: service driver pcie_pme loaded
[ 3.929950] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.930091] pciehp 0000:00:02.1:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 3.930166] pciehp 0000:00:02.1:pcie04: service driver pciehp loaded
[ 3.930176] pciehp 0000:00:03.2:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 3.930205] pciehp 0000:00:03.2:pcie04: service driver pciehp loaded
[ 3.930216] pciehp 0000:00:03.4:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 3.930245] pciehp 0000:00:03.4:pcie04: service driver pciehp loaded
[ 3.930252] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.930963] ACPI: AC Adapter [AC] (on-line)
[ 3.931502] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 3.931507] ACPI: Sleep Button [SLPB]
[ 3.931557] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.931643] ACPI: Lid Switch [LID]
[ 3.931692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.931694] ACPI: Power Button [PWRF]
[ 3.931812] ACPI: acpi_idle registered with cpuidle
[ 3.975767] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.975773] ACPI: Thermal Zone [CPUZ] (50 C)
[ 4.014818] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.014824] ACPI: Thermal Zone [GFXZ] (0 C)
[ 4.036085] thermal LNXTHERM:02: registered as thermal_zone2
[ 4.036092] ACPI: Thermal Zone [EXTZ] (0 C)
[ 4.058349] thermal LNXTHERM:03: registered as thermal_zone3
[ 4.058354] ACPI: Thermal Zone [LOCZ] (0 C)
[ 4.085269] thermal LNXTHERM:04: registered as thermal_zone4
[ 4.085275] ACPI: Thermal Zone [BATZ] (22 C)
[ 4.085387] GHES: HEST is not enabled!
[ 4.085606] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.088315] Linux agpgart interface v0.103
[ 4.115885] ACPI: Battery Slot [BAT0] (battery present)
[ 4.145085] tpm_tis 00:06: 1.2 TPM (device-id 0x1A, rev-id 16)
[ 4.462822] brd: module loaded
[ 4.464659] loop: module loaded
[ 4.465068] libphy: Fixed MDIO Bus: probed
[ 4.465072] tun: Universal TUN/TAP device driver, 1.6
[ 4.465074] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.465212] PPP generic driver version 2.4.2
[ 4.465730] QUIRK: Enable AMD PLL fix
[ 4.465761] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.465770] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 4.465991] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 4.466208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.466211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.466213] usb usb1: Product: xHCI Host Controller
[ 4.466216] usb usb1: Manufacturer: Linux 4.0.0-040000rc5-generic xhci-hcd
[ 4.466218] usb usb1: SerialNumber: 0000:00:10.0
[ 4.466595] hub 1-0:1.0: USB hub found
[ 4.466637] hub 1-0:1.0: 2 ports detected
[ 4.466964] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.466968] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 4.469410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.469413] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.469415] usb usb2: Product: xHCI Host Controller
[ 4.469417] usb usb2: Manufacturer: Linux 4.0.0-040000rc5-generic xhci-hcd
[ 4.469419] usb usb2: SerialNumber: 0000:00:10.0
[ 4.469658] hub 2-0:1.0: USB hub found
[ 4.469699] hub 2-0:1.0: 2 ports detected
[ 4.469984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.469992] ehci-pci: EHCI PCI platform driver
[ 4.470342] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 4.470348] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 4.470353] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.470365] ehci-pci 0000:00:12.2: debug port 1
[ 4.470408] ehci-pci 0000:00:12.2: irq 17, io mem 0xd694d000
[ 4.481056] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.481154] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.481157] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.481160] usb usb3: Product: EHCI Host Controller
[ 4.481161] usb usb3: Manufacturer: Linux 4.0.0-040000rc5-generic ehci_hcd
[ 4.481163] usb usb3: SerialNumber: 0000:00:12.2
[ 4.481555] hub 3-0:1.0: USB hub found
[ 4.481564] hub 3-0:1.0: 5 ports detected
[ 4.482343] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.482353] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 4.482360] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.482375] ehci-pci 0000:00:13.2: debug port 1
[ 4.482435] ehci-pci 0000:00:13.2: irq 17, io mem 0xd694b000
[ 4.493064] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.493142] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.493145] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.493147] usb usb4: Product: EHCI Host Controller
[ 4.493149] usb usb4: Manufacturer: Linux 4.0.0-040000rc5-generic ehci_hcd
[ 4.493151] usb usb4: SerialNumber: 0000:00:13.2
[ 4.493521] hub 4-0:1.0: USB hub found
[ 4.493531] hub 4-0:1.0: 5 ports detected
[ 4.493849] ehci-platform: EHCI generic platform driver
[ 4.493877] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.493886] ohci-pci: OHCI PCI platform driver
[ 4.494270] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 4.494280] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 4.494335] ohci-pci 0000:00:12.0: irq 18, io mem 0xd694e000
[ 4.553136] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.553142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.553144] usb usb5: Product: OHCI PCI host controller
[ 4.553146] usb usb5: Manufacturer: Linux 4.0.0-040000rc5-generic ohci_hcd
[ 4.553148] usb usb5: SerialNumber: 0000:00:12.0
[ 4.553525] hub 5-0:1.0: USB hub found
[ 4.553568] hub 5-0:1.0: 5 ports detected
[ 4.554189] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 4.554199] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 4.554240] ohci-pci 0000:00:13.0: irq 18, io mem 0xd694c000
[ 4.613140] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.613146] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.613148] usb usb6: Product: OHCI PCI host controller
[ 4.613150] usb usb6: Manufacturer: Linux 4.0.0-040000rc5-generic ohci_hcd
[ 4.613152] usb usb6: SerialNumber: 0000:00:13.0
[ 4.613702] hub 6-0:1.0: USB hub found
[ 4.613747] hub 6-0:1.0: 5 ports detected
[ 4.614306] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 4.614314] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 4.614361] ohci-pci 0000:00:14.5: irq 18, io mem 0xd694a000
[ 4.673145] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.673151] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.673153] usb usb7: Product: OHCI PCI host controller
[ 4.673155] usb usb7: Manufacturer: Linux 4.0.0-040000rc5-generic ohci_hcd
[ 4.673157] usb usb7: SerialNumber: 0000:00:14.5
[ 4.673709] hub 7-0:1.0: USB hub found
[ 4.673755] hub 7-0:1.0: 2 ports detected
[ 4.674027] ohci-platform: OHCI generic platform driver
[ 4.674052] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.674154] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.675999] i8042: Detected active multiplexing controller, rev 1.1
[ 4.676990] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.676997] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.677039] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.677066] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.677094] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.677524] mousedev: PS/2 mouse device common for all mice
[ 4.677806] rtc_cmos 00:03: RTC can wake from S4
[ 4.677959] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.677997] rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
[ 4.678028] i2c /dev entries driver
[ 4.678116] device-mapper: uevent: version 1.0.3
[ 4.678276] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[ 4.678304] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.678560] PCCT header not found.
[ 4.678682] TCP: cubic registered
[ 4.678846] NET: Registered protocol family 10
[ 4.679193] NET: Registered protocol family 17
[ 4.679211] Key type dns_resolver registered
[ 4.680048] Loading compiled-in X.509 certificates
[ 4.681154] Loaded X.509 cert 'Magrathea: Glacier signing key: 52ea0fd1365a8bb7cfe35aafe1559acb9e5bbe52'
[ 4.681178] registered taskstats version 1
[ 4.683928] Key type trusted registered
[ 4.688505] Key type encrypted registered
[ 4.688517] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.703852] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 4.793126] usb 3-5: new high-speed USB device number 2 using ehci-pci
[ 4.921111] tsc: Refined TSC clocksource calibration: 1896.571 MHz
[ 5.009062] usb 7-2: new full-speed USB device number 2 using ohci-pci
[ 5.013998] usb 3-5: New USB device found, idVendor=04ca, idProduct=7022
[ 5.014003] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.014006] usb 3-5: Product: HP HD Webcam
[ 5.014008] usb 3-5: Manufacturer: DDZLD01G46C6VD
[ 5.179414] usb 7-2: New USB device found, idVendor=138a, idProduct=003f
[ 5.179420] usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.179423] usb 7-2: SerialNumber: 00b0245f4c92
[ 5.345248] evm: HMAC attrs: 0x1
[ 5.346128] Magic number: 7:690:709
[ 5.346276] rtc_cmos 00:03: setting system clock to 2015-03-27 00:43:25 UTC (1427417005)
[ 5.346690] acpi-cpufreq: overriding BIOS provided _PSD data
[ 5.347063] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.347064] EDD information not available.
[ 5.347169] PM: Hibernation image not present or could not be loaded.
[ 5.347801] Freeing unused kernel memory: 1420K (ffffffff81d1e000 - ffffffff81e81000)
[ 5.347804] Write protecting the kernel read-only data: 12288k
[ 5.348165] Freeing unused kernel memory: 48K (ffff8800017f4000 - ffff880001800000)
[ 5.348283] Freeing unused kernel memory: 184K (ffff880001bd2000 - ffff880001c00000)
[ 5.371643] systemd-udevd[125]: starting version 204
[ 5.389008] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.396381] acpi device:00: registered as cooling_device4
[ 5.396571] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 5.397803] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 5.399253] acpi device:0a: registered as cooling_device5
[ 5.399459] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input10
[ 5.401978] wmi: Mapper loaded
[ 5.408402] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.408418] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.409988] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 36
[ 5.412667] ahci 0000:00:11.0: version 3.0
[ 5.413244] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.413250] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 5.415654] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000c8e000, a0:2b:b8:33:f8:73, XID 10900800 IRQ 45
[ 5.415660] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.421103] scsi host0: ahci
[ 5.421440] scsi host1: ahci
[ 5.421622] ata1: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f100 irq 37
[ 5.421627] ata2: SATA max UDMA/133 abar m2048@0xd694f000 port 0xd694f180 irq 38
[ 5.913088] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.913130] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.916545] ata1.00: ATA-9: HGST HTS541010A9E680, JA0OA710, max UDMA/133
[ 5.916551] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.918208] ata2.00: ATAPI: hp DVDRW SU208FB, HH01, max UDMA/100
[ 5.918421] ata1.00: configured for UDMA/133
[ 5.918660] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A710 PQ: 0 ANSI: 5
[ 5.918983] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.918987] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.919033] sd 0:0:0:0: [sda] Write Protect is off
[ 5.919037] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.919057] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.919072] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.921236] Switched to clocksource tsc
[ 5.925314] ata2.00: configured for UDMA/100
[ 5.929242] scsi 1:0:0:0: CD-ROM hp DVDRW SU208FB HH01 PQ: 0 ANSI: 5
[ 5.956941] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.956962] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.957247] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.957435] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.980607] sda: sda1 sda2 sda3
[ 5.981322] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.204472] psmouse serio3: synaptics: queried max coordinates: x [..5742], y [..5004]
[ 6.242153] psmouse serio3: synaptics: queried min coordinates: x [1198..], y [972..]
[ 6.308349] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2653, fw id: 1481159
[ 6.350935] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input13
[ 7.837246] raid6: sse2x1 5677 MB/s
[ 7.905242] raid6: sse2x2 8483 MB/s
[ 7.973247] raid6: sse2x4 9577 MB/s
[ 7.973248] raid6: using algorithm sse2x4 (9577 MB/s)
[ 7.973250] raid6: using ssse3x2 recovery algorithm
[ 7.974732] xor: automatically using best checksumming function:
[ 8.013267] avx : 9121.000 MB/sec
[ 8.029245] Btrfs loaded
[ 8.229134] random: nonblocking pool is initialized
[ 8.382847] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 18.573673] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 18.610341] Adding 7282684k swap on /dev/sda3. Priority:-1 extents:1 across:7282684k FS
[ 18.893987] systemd-udevd[400]: starting version 204
[ 19.441521] Initializing HPQ6001 module
[ 19.441609] input: HP Wireless hotkeys as /devices/virtual/input/input15
[ 19.539631] hp_accel: laptop model unknown, using default axes configuration
[ 19.605725] lp: driver loaded but no devices found
[ 19.666352] lis3lv02d: 8 bits 3DC sensor found
[ 19.757281] ppdev: user-space parallel port driver
[ 19.776957] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b06 (\_SB_.PCI0.SMBS.SMBO) (20150204/utaddress-258)
[ 19.776967] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.814895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.841565] device-mapper: multipath: version 1.8.0 loaded
[ 19.873693] MCE: In-kernel MCE decoding enabled.
[ 19.907181] serio_raw serio3: raw access enabled on isa0060/serio3 (serio_raw0, minor 56)
[ 19.915585] EDAC MC: Ver: 3.0.0
[ 19.923004] AMD64 EDAC driver v3.4.0
[ 19.923062] EDAC amd64: DRAM ECC disabled.
[ 19.923071] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 19.923071] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 19.923071] (Note that use of the override may cause unknown side effects.)
[ 20.166654] audit: type=1400 audit(1427417020.312:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=587 comm="apparmor_parser"
[ 20.166662] audit: type=1400 audit(1427417020.312:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
[ 20.166666] audit: type=1400 audit(1427417020.312:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
[ 20.167083] audit: type=1400 audit(1427417020.316:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
[ 20.167089] audit: type=1400 audit(1427417020.316:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
[ 20.167296] audit: type=1400 audit(1427417020.316:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
[ 20.527555] AVX version of gcm_enc/dec engaged.
[ 20.527560] AES CTR mode by8 optimization enabled
[ 20.527780] cfg80211: Calling CRDA to update world regulatory domain
[ 20.541387] Bluetooth: Core ver 2.20
[ 20.541410] NET: Registered protocol family 31
[ 20.541413] Bluetooth: HCI device and connection manager initialized
[ 20.541419] Bluetooth: HCI socket layer initialized
[ 20.541424] Bluetooth: L2CAP socket layer initialized
[ 20.541435] Bluetooth: SCO socket layer initialized
[ 20.586232] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.586238] Bluetooth: BNEP filters: protocol multicast
[ 20.586246] Bluetooth: BNEP socket layer initialized
[ 20.679151] Bluetooth: RFCOMM TTY layer initialized
[ 20.679167] Bluetooth: RFCOMM socket layer initialized
[ 20.679175] Bluetooth: RFCOMM ver 1.11
[ 20.700752] input: HP WMI hotkeys as /devices/virtual/input/input16
[ 20.704700] audit: type=1400 audit(1427417020.852:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=762 comm="apparmor_parser"
[ 20.704709] audit: type=1400 audit(1427417020.852:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=762 comm="apparmor_parser"
[ 20.705209] audit: type=1400 audit(1427417020.852:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=762 comm="apparmor_parser"
[ 20.989275] init: failsafe main process (682) killed by TERM signal
[ 21.003292] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
[ 21.035017] init: cups main process (765) killed by HUP signal
[ 21.035034] init: cups main process ended, respawning
[ 21.172714] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input18
[ 21.178302] media: Linux media interface: v0.10
[ 21.231903] Linux video capture interface: v2.00
[ 21.258845] sound hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 21.258853] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.258856] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 21.258858] sound hdaudioC1D0: mono: mono_out=0x0
[ 21.258860] sound hdaudioC1D0: inputs:
[ 21.258863] sound hdaudioC1D0: Mic=0x19
[ 21.258866] sound hdaudioC1D0: Internal Mic=0x12
[ 21.270563] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
[ 21.270792] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input20
[ 21.288926] kvm: Nested Virtualization enabled
[ 21.288934] kvm: Nested Paging enabled
[ 21.333820] ath: phy0: Enable LNA combining
[ 21.334925] ath: EEPROM regdomain: 0x60
[ 21.334927] ath: EEPROM indicates we should expect a direct regpair map
[ 21.334931] ath: Country alpha2 being used: 00
[ 21.334933] ath: Regpair used: 0x60
[ 21.350298] cfg80211: World regulatory domain updated:
[ 21.350305] cfg80211: DFS Master region: unset
[ 21.350307] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 21.350311] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.350313] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.350315] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.350318] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.350320] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.560522] audit: type=1400 audit(1427417021.708:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=919 comm="apparmor_parser"
[ 21.766410] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.767028] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90011280000, irq=48
[ 21.892145] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7022)
[ 21.903000] input: HP HD Webcam as /devices/pci0000:00/0000:00:12.2/usb3/3-5/3-5:1.0/input/input21
[ 21.903178] usbcore: registered new interface driver uvcvideo
[ 21.903181] USB Video Class driver (1.1.1)
[ 22.819097] thinkpad_ec: module verification failed: signature and/or required key missing - tainting kernel
[ 22.819653] thinkpad_ec: no ThinkPad embedded controller!
[ 23.505791] r8169 0000:02:00.0 eth0: link down
[ 23.505862] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.505977] r8169 0000:02:00.0 eth0: link down
[ 23.515063] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
[ 23.522602] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.708522] wlan0: authenticate with 3c:ce:73:48:04:80
[ 24.722592] wlan0: send auth to 3c:ce:73:48:04:80 (try 1/3)
[ 26.146128] r8169 0000:02:00.0 eth0: link up
[ 26.146145] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.156206] wlan0: send auth to 3c:ce:73:48:04:80 (try 2/3)
[ 26.510452] init: plymouth-upstart-bridge main process ended, respawning
[ 26.517237] init: lightdm main process (1365) terminated with status 1
[ 26.517450] init: plymouth-upstart-bridge main process (1407) terminated with status 1
[ 26.517462] init: plymouth-upstart-bridge main process ended, respawning
[ 26.540853] init: plymouth-ready (startup) main process (269) terminated with status 1
[ 26.727346] wlan0: authenticated
[ 26.756078] wlan0: associate with 3c:ce:73:48:04:80 (try 1/3)
[ 28.144389] wlan0: associate with 3c:ce:73:48:04:80 (try 2/3)
[ 28.759694] wlan0: RX AssocResp from 3c:ce:73:48:04:80 (capab=0x431 status=0 aid=2)
[ 28.759831] wlan0: associated
[ 28.759848] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.759971] cfg80211: Calling CRDA for country: TW
[ 28.760001] wlan0: deauthenticated from 3c:ce:73:48:04:80 (Reason: 23=IEEE8021X_FAILED)
[ 28.763180] ath: EEPROM regdomain: 0x809e
[ 28.763185] ath: EEPROM indicates we should expect a country code
[ 28.763187] ath: doing EEPROM country->regdmn map search
[ 28.763188] ath: country maps to regdmn code: 0x50
[ 28.763190] ath: Country alpha2 being used: TW
[ 28.763191] ath: Regpair used: 0x50
[ 28.763193] ath: regdomain 0x809e dynamically updated by country IE
[ 28.763216] cfg80211: Regulatory domain changed to country: TW
[ 28.763218] cfg80211: DFS Master region: unset
[ 28.763219] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 28.763222] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
[ 28.763224] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s)
[ 28.763226] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
[ 28.788148] cfg80211: Calling CRDA to update world regulatory domain
[ 28.791023] cfg80211: World regulatory domain updated:
[ 28.791028] cfg80211: DFS Master region: unset
[ 28.791030] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 28.791033] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 28.791035] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 28.791037] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 28.791039] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 28.791041] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23QnUO+w0EXUx8DtgPx0W=fz37_R04EW6P-g+PF_y_U1dfA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2015-03-30 16:09 ` Joerg Roedel
[not found] ` <20150330160910.GZ4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: Joerg Roedel @ 2015-03-30 16:09 UTC (permalink / raw)
To: AceLan Kao; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi AceLan,
On Fri, Mar 27, 2015 at 08:48:22AM +0800, AceLan Kao wrote:
> Very thanks for your time.
> This is the log booting with kernel 4.0rc5 without fglrx loaded.
Thanks, it scheds some light on the issue. See below.
> [ 0.080177] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
> [ 0.080181] AMD-Vi: mmio-addr: 00000000feb80000
> [ 0.080198] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
> [ 0.080200] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
> [ 0.081192] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
> [ 0.081194] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
> [ 0.081204] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
> [ 0.081207] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
> [ 0.081208] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
This is dump of the IVRS table contents. It tells us that IOAPIC with ID
5 uses PCI request-id 00:00.0. But this information is wrong, it uses
request-id 00:00.1, as seen below:
> [ 23.515063] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
This message comes from an interrupt request sent by the IOAPIC, and it
uses a different request-id. Can you try to update the BIOS on that
machine and test if it fixes the issue?
Joerg
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <20150330160910.GZ4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2015-03-31 0:30 ` AceLan Kao
[not found] ` <CAFv23QmOjFb9NgLY0aW55OpQSecFA83jNOU1TY7o3qWuft1_Cw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: AceLan Kao @ 2015-03-31 0:30 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Joerg,
Thank you so much, I'll try asking BIOS engineer to deliver us a new
BIOS for testing.
Best regards,
AceLan Kao.
2015-03-31 0:09 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Hi AceLan,
>
> On Fri, Mar 27, 2015 at 08:48:22AM +0800, AceLan Kao wrote:
>> Very thanks for your time.
>> This is the log booting with kernel 4.0rc5 without fglrx loaded.
>
> Thanks, it scheds some light on the issue. See below.
>
>> [ 0.080177] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
>> [ 0.080181] AMD-Vi: mmio-addr: 00000000feb80000
>> [ 0.080198] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
>> [ 0.080200] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
>> [ 0.081192] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
>> [ 0.081194] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
>> [ 0.081204] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
>> [ 0.081207] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
>> [ 0.081208] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
>
> This is dump of the IVRS table contents. It tells us that IOAPIC with ID
> 5 uses PCI request-id 00:00.0. But this information is wrong, it uses
> request-id 00:00.1, as seen below:
>
>> [ 23.515063] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
>
> This message comes from an interrupt request sent by the IOAPIC, and it
> uses a different request-id. Can you try to update the BIOS on that
> machine and test if it fixes the issue?
>
>
> Joerg
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23QmOjFb9NgLY0aW55OpQSecFA83jNOU1TY7o3qWuft1_Cw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2015-04-23 2:15 ` AceLan Kao
[not found] ` <CAFv23Q==+tXTif9uQfyTHE28hxGt80WYS=A6qN7q0Q4q7re6kw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: AceLan Kao @ 2015-04-23 2:15 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Joerg,
We can confirm that the issue comes from the resources conflict,
adding this boot option can solve the issue.
ivrs_ioapic[5]=00:00.1
We've tried to negotiate with the OEM BIOS team, but they refused to
modify the BIOS code, since there is no issue on MS Windows and it'll
require to re-start a full test if the BIOS code is changed, so they
don't want to do that.
I'm wondering if we can add a quirk to list those machine and assign
them the correct ivrs_ioapic value in amd_iommu driver?
Thanks.
Best regards,
AceLan Kao.
2015-03-31 8:30 GMT+08:00 AceLan Kao <acelan.kao-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>:
> Hi Joerg,
>
> Thank you so much, I'll try asking BIOS engineer to deliver us a new
> BIOS for testing.
>
> Best regards,
> AceLan Kao.
>
> 2015-03-31 0:09 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
>> Hi AceLan,
>>
>> On Fri, Mar 27, 2015 at 08:48:22AM +0800, AceLan Kao wrote:
>>> Very thanks for your time.
>>> This is the log booting with kernel 4.0rc5 without fglrx loaded.
>>
>> Thanks, it scheds some light on the issue. See below.
>>
>>> [ 0.080177] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
>>> [ 0.080181] AMD-Vi: mmio-addr: 00000000feb80000
>>> [ 0.080198] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
>>> [ 0.080200] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
>>> [ 0.081192] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
>>> [ 0.081194] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
>>> [ 0.081204] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
>>> [ 0.081207] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
>>> [ 0.081208] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
>>
>> This is dump of the IVRS table contents. It tells us that IOAPIC with ID
>> 5 uses PCI request-id 00:00.0. But this information is wrong, it uses
>> request-id 00:00.1, as seen below:
>>
>>> [ 23.515063] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
>>
>> This message comes from an interrupt request sent by the IOAPIC, and it
>> uses a different request-id. Can you try to update the BIOS on that
>> machine and test if it fixes the issue?
>>
>>
>> Joerg
>>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23Q==+tXTif9uQfyTHE28hxGt80WYS=A6qN7q0Q4q7re6kw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2015-05-04 2:27 ` AceLan Kao
2015-05-04 11:08 ` Joerg Roedel
1 sibling, 0 replies; 14+ messages in thread
From: AceLan Kao @ 2015-05-04 2:27 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi all,
I filed a bug on bugzilla[1], I wish we could discuss and find a
solution on bugzilla.
I'll try to build a patch if you think adding a quirk is do-able.
Thanks,
1. https://bugzilla.kernel.org/show_bug.cgi?id=97661
Best regards,
AceLan Kao.
2015-04-23 10:15 GMT+08:00 AceLan Kao <acelan.kao-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>:
> Hi Joerg,
>
> We can confirm that the issue comes from the resources conflict,
> adding this boot option can solve the issue.
> ivrs_ioapic[5]=00:00.1
> We've tried to negotiate with the OEM BIOS team, but they refused to
> modify the BIOS code, since there is no issue on MS Windows and it'll
> require to re-start a full test if the BIOS code is changed, so they
> don't want to do that.
>
> I'm wondering if we can add a quirk to list those machine and assign
> them the correct ivrs_ioapic value in amd_iommu driver?
> Thanks.
>
> Best regards,
> AceLan Kao.
>
> 2015-03-31 8:30 GMT+08:00 AceLan Kao <acelan.kao-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>:
>> Hi Joerg,
>>
>> Thank you so much, I'll try asking BIOS engineer to deliver us a new
>> BIOS for testing.
>>
>> Best regards,
>> AceLan Kao.
>>
>> 2015-03-31 0:09 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
>>> Hi AceLan,
>>>
>>> On Fri, Mar 27, 2015 at 08:48:22AM +0800, AceLan Kao wrote:
>>>> Very thanks for your time.
>>>> This is the log booting with kernel 4.0rc5 without fglrx loaded.
>>>
>>> Thanks, it scheds some light on the issue. See below.
>>>
>>>> [ 0.080177] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: b8 info 0000
>>>> [ 0.080181] AMD-Vi: mmio-addr: 00000000feb80000
>>>> [ 0.080198] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:01.0 flags: 00
>>>> [ 0.080200] AMD-Vi: DEV_RANGE_END devid: ff:1f.6
>>>> [ 0.081192] AMD-Vi: DEV_ALIAS_RANGE devid: 05:00.0 flags: 00 devid_to: 00:14.4
>>>> [ 0.081194] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
>>>> [ 0.081204] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
>>>> [ 0.081207] AMD-Vi: DEV_SPECIAL(IOAPIC[4]) devid: 00:14.0
>>>> [ 0.081208] AMD-Vi: DEV_SPECIAL(IOAPIC[5]) devid: 00:00.0
>>>
>>> This is dump of the IVRS table contents. It tells us that IOAPIC with ID
>>> 5 uses PCI request-id 00:00.0. But this information is wrong, it uses
>>> request-id 00:00.1, as seen below:
>>>
>>>> [ 23.515063] AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.1 address=0x000000fdf80c0020 flags=0x0a00]
>>>
>>> This message comes from an interrupt request sent by the IOAPIC, and it
>>> uses a different request-id. Can you try to update the BIOS on that
>>> machine and test if it fixes the issue?
>>>
>>>
>>> Joerg
>>>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23Q==+tXTif9uQfyTHE28hxGt80WYS=A6qN7q0Q4q7re6kw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-04 2:27 ` AceLan Kao
@ 2015-05-04 11:08 ` Joerg Roedel
[not found] ` <20150504110802.GE15736-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
1 sibling, 1 reply; 14+ messages in thread
From: Joerg Roedel @ 2015-05-04 11:08 UTC (permalink / raw)
To: AceLan Kao; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Acelan,
On Thu, Apr 23, 2015 at 10:15:33AM +0800, AceLan Kao wrote:
> We can confirm that the issue comes from the resources conflict,
> adding this boot option can solve the issue.
> ivrs_ioapic[5]=00:00.1
> We've tried to negotiate with the OEM BIOS team, but they refused to
> modify the BIOS code, since there is no issue on MS Windows and it'll
> require to re-start a full test if the BIOS code is changed, so they
> don't want to do that.
>
> I'm wondering if we can add a quirk to list those machine and assign
> them the correct ivrs_ioapic value in amd_iommu driver?
It is probably hard to match a specific machine which has the bug. What
do you think would be a good indicator to check whether this BIOS bug is
present?
Joerg
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <20150504110802.GE15736-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2015-05-05 7:30 ` AceLan Kao
[not found] ` <CAFv23QkRouVJ6siu==-EjLndP2Z7inz+qVeKxLci3=R=9r8+zQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: AceLan Kao @ 2015-05-05 7:30 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Joerg,
There is no easy way to check whether this BIOS bug is present, so we
have to list them explicitly.
I think we can do just like what platform drivers(ex. asus_quirks[1])
do, check the system vendor and product name to identify those
machines, and give them a working ioapic value.
1. drivers/platform/x86/asus-nb-wmi.c
Best regards,
AceLan Kao.
2015-05-04 19:08 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Hi Acelan,
>
> On Thu, Apr 23, 2015 at 10:15:33AM +0800, AceLan Kao wrote:
>> We can confirm that the issue comes from the resources conflict,
>> adding this boot option can solve the issue.
>> ivrs_ioapic[5]=00:00.1
>> We've tried to negotiate with the OEM BIOS team, but they refused to
>> modify the BIOS code, since there is no issue on MS Windows and it'll
>> require to re-start a full test if the BIOS code is changed, so they
>> don't want to do that.
>>
>> I'm wondering if we can add a quirk to list those machine and assign
>> them the correct ivrs_ioapic value in amd_iommu driver?
>
> It is probably hard to match a specific machine which has the bug. What
> do you think would be a good indicator to check whether this BIOS bug is
> present?
>
>
> Joerg
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23QkRouVJ6siu==-EjLndP2Z7inz+qVeKxLci3=R=9r8+zQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2015-05-05 15:13 ` Joerg Roedel
[not found] ` <20150505151319.GO15736-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: Joerg Roedel @ 2015-05-05 15:13 UTC (permalink / raw)
To: AceLan Kao; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi,
On Tue, May 05, 2015 at 03:30:41PM +0800, AceLan Kao wrote:
> There is no easy way to check whether this BIOS bug is present, so we
> have to list them explicitly.
> I think we can do just like what platform drivers(ex. asus_quirks[1])
> do, check the system vendor and product name to identify those
> machines, and give them a working ioapic value.
Problem here is that system vendor and platform name is not enough, the
version of the BIOS is also important. To make things worse, the problem
could be introduced into one BIOS version and fixes in another later
version.
My feeling is that trying to make guesses here will open a can of
worms we better keep closed. The strategy for now has been to search for
broken configurations and disable interrupt remapping when they are
detected.
Joerg
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <20150505151319.GO15736-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2015-05-13 7:37 ` AceLan Kao
[not found] ` <CAFv23Q=iU7X1EOcZDUh6NhcnuvyyNSKUGEot6ZhCg8uZ7kRNAQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 14+ messages in thread
From: AceLan Kao @ 2015-05-13 7:37 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Joerg,
The method I described is not making any guess, we need a table to
write down the correct ioapic value for those machines, we can add the
BIOS version check(DMI_BIOS_VERSION) if you think the behavior may
change with different version of BIOSes.
If you still feel uncomfortable, I'm okay with any solutions, but I
don't get it how to do it in your way.
We can found those machines from bug reports(I have some machines on
my hand, too), so we need a table to record those machines? And how to
disable interrupt remapping, will it lead to any side effect?
Best regards,
AceLan Kao.
2015-05-05 23:13 GMT+08:00 Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>:
> Hi,
>
> On Tue, May 05, 2015 at 03:30:41PM +0800, AceLan Kao wrote:
>> There is no easy way to check whether this BIOS bug is present, so we
>> have to list them explicitly.
>> I think we can do just like what platform drivers(ex. asus_quirks[1])
>> do, check the system vendor and product name to identify those
>> machines, and give them a working ioapic value.
>
> Problem here is that system vendor and platform name is not enough, the
> version of the BIOS is also important. To make things worse, the problem
> could be introduced into one BIOS version and fixes in another later
> version.
>
> My feeling is that trying to make guesses here will open a can of
> worms we better keep closed. The strategy for now has been to search for
> broken configurations and disable interrupt remapping when they are
> detected.
>
>
> Joerg
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Any side effect if turn off amd_iommu
[not found] ` <CAFv23Q=iU7X1EOcZDUh6NhcnuvyyNSKUGEot6ZhCg8uZ7kRNAQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2015-05-13 13:44 ` Joerg Roedel
0 siblings, 0 replies; 14+ messages in thread
From: Joerg Roedel @ 2015-05-13 13:44 UTC (permalink / raw)
To: AceLan Kao; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi AceLan Kao,
On Wed, May 13, 2015 at 03:37:57PM +0800, AceLan Kao wrote:
> The method I described is not making any guess, we need a table to
> write down the correct ioapic value for those machines, we can add the
> BIOS version check(DMI_BIOS_VERSION) if you think the behavior may
> change with different version of BIOSes.
You don't know which IO-APIC is which one without a correct IVRS table.
AMD desktop systems have usually have up to two IO-APICs, one in the SB
and one in the NB. But the ids of these IO-APICs are not fixed and
can depend on the BIOS version as well as on the processor that is
plugged into the board. So since we don't know which IO-APIC is which
one we can't make any good guesses that work for everybody. When we
implement workarounds we may fix it for one user, but risk breakage for
others.
> If you still feel uncomfortable, I'm okay with any solutions, but I
> don't get it how to do it in your way.
> We can found those machines from bug reports(I have some machines on
> my hand, too), so we need a table to record those machines? And how to
> disable interrupt remapping, will it lead to any side effect?
Disabling interrupt remapping has no big side effect. You only have to
load vfio with a special parameter so allow unsafe interrupts to do
device assignment with KVM.
Joerg
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2015-05-13 13:44 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-25 3:30 Any side effect if turn off amd_iommu AceLan Kao
[not found] ` <CAFv23QmxQ3vJnMEGN0TNR3vLAx1MN7ptB0y3QQLKciqfT3OBsQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-25 14:04 ` Joerg Roedel
[not found] ` <20150325140410.GS4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2015-03-26 2:26 ` AceLan Kao
[not found] ` <CAFv23Qn93z4pE6RtURgoiBADpgCWZ6gfpMPn3akfJibudRi+Qg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-26 12:05 ` Joerg Roedel
[not found] ` <20150326120547.GU4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2015-03-27 0:48 ` AceLan Kao
[not found] ` <CAFv23QnUO+w0EXUx8DtgPx0W=fz37_R04EW6P-g+PF_y_U1dfA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-30 16:09 ` Joerg Roedel
[not found] ` <20150330160910.GZ4441-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2015-03-31 0:30 ` AceLan Kao
[not found] ` <CAFv23QmOjFb9NgLY0aW55OpQSecFA83jNOU1TY7o3qWuft1_Cw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-23 2:15 ` AceLan Kao
[not found] ` <CAFv23Q==+tXTif9uQfyTHE28hxGt80WYS=A6qN7q0Q4q7re6kw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-04 2:27 ` AceLan Kao
2015-05-04 11:08 ` Joerg Roedel
[not found] ` <20150504110802.GE15736-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2015-05-05 7:30 ` AceLan Kao
[not found] ` <CAFv23QkRouVJ6siu==-EjLndP2Z7inz+qVeKxLci3=R=9r8+zQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-05 15:13 ` Joerg Roedel
[not found] ` <20150505151319.GO15736-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2015-05-13 7:37 ` AceLan Kao
[not found] ` <CAFv23Q=iU7X1EOcZDUh6NhcnuvyyNSKUGEot6ZhCg8uZ7kRNAQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-13 13:44 ` Joerg Roedel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.