All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukasz Majewski <l.majewski@samsung.com>
To: Anand Moon <linux.amoon@gmail.com>
Cc: Eduardo Valentin <edubezval@gmail.com>,
	Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
	Russell King <linux@arm.linux.org.uk>,
	Kukjin Kim <kgene@kernel.org>,
	devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Guenter Roeck <linux@roeck-us.net>
Subject: Re: [PATCH 6/6] hwmon: pwm-fan: Update the duty cycle inorder to control the pwm-fan
Date: Wed, 08 Apr 2015 10:44:15 +0200	[thread overview]
Message-ID: <20150408104415.07e1c821@amdc2363> (raw)
In-Reply-To: <1427387955-5129-7-git-send-email-linux.amoon@gmail.com>

Hi Anand,

> Below changes depend on following patch.
> https://patchwork.kernel.org/patch/5944061/
> 
> Update the pwm_config with duty then update the pwm_disable
> to poweroff the cpu fan.
> 
> Tested on OdroidXU3 board.
> 
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  drivers/hwmon/pwm-fan.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> index 7c83dc4..f25c841 100644
> --- a/drivers/hwmon/pwm-fan.c
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -44,26 +44,24 @@ static int  __set_pwm(struct pwm_fan_ctx *ctx,
> unsigned long pwm) int ret = 0;
>  
>  	mutex_lock(&ctx->lock);
> +
>  	if (ctx->pwm_value == pwm)
>  		goto exit_set_pwm_err;
>  
> -	if (pwm == 0) {
> -		pwm_disable(ctx->pwm);
> -		goto exit_set_pwm;
> -	}
> -
>  	duty = DIV_ROUND_UP(pwm * (ctx->pwm->period - 1), MAX_PWM);
>  	ret = pwm_config(ctx->pwm, duty, ctx->pwm->period);
>  	if (ret)
>  		goto exit_set_pwm_err;
>  
> +	if (pwm == 0)
> +		pwm_disable(ctx->pwm);
> +
>  	if (ctx->pwm_value == 0) {
>  		ret = pwm_enable(ctx->pwm);
>  		if (ret)
>  			goto exit_set_pwm_err;
>  	}
>  
> -exit_set_pwm:
>  	ctx->pwm_value = pwm;
>  exit_set_pwm_err:
>  	mutex_unlock(&ctx->lock);

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

BTW: I've added Guenter to CC.

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

WARNING: multiple messages have this Message-ID (diff)
From: l.majewski@samsung.com (Lukasz Majewski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] hwmon: pwm-fan: Update the duty cycle inorder to control the pwm-fan
Date: Wed, 08 Apr 2015 10:44:15 +0200	[thread overview]
Message-ID: <20150408104415.07e1c821@amdc2363> (raw)
In-Reply-To: <1427387955-5129-7-git-send-email-linux.amoon@gmail.com>

Hi Anand,

> Below changes depend on following patch.
> https://patchwork.kernel.org/patch/5944061/
> 
> Update the pwm_config with duty then update the pwm_disable
> to poweroff the cpu fan.
> 
> Tested on OdroidXU3 board.
> 
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
>  drivers/hwmon/pwm-fan.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> index 7c83dc4..f25c841 100644
> --- a/drivers/hwmon/pwm-fan.c
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -44,26 +44,24 @@ static int  __set_pwm(struct pwm_fan_ctx *ctx,
> unsigned long pwm) int ret = 0;
>  
>  	mutex_lock(&ctx->lock);
> +
>  	if (ctx->pwm_value == pwm)
>  		goto exit_set_pwm_err;
>  
> -	if (pwm == 0) {
> -		pwm_disable(ctx->pwm);
> -		goto exit_set_pwm;
> -	}
> -
>  	duty = DIV_ROUND_UP(pwm * (ctx->pwm->period - 1), MAX_PWM);
>  	ret = pwm_config(ctx->pwm, duty, ctx->pwm->period);
>  	if (ret)
>  		goto exit_set_pwm_err;
>  
> +	if (pwm == 0)
> +		pwm_disable(ctx->pwm);
> +
>  	if (ctx->pwm_value == 0) {
>  		ret = pwm_enable(ctx->pwm);
>  		if (ret)
>  			goto exit_set_pwm_err;
>  	}
>  
> -exit_set_pwm:
>  	ctx->pwm_value = pwm;
>  exit_set_pwm_err:
>  	mutex_unlock(&ctx->lock);

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

BTW: I've added Guenter to CC.

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

  reply	other threads:[~2015-04-08  8:44 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-26 16:39 Exynos5422 odroidxu3 pwm-fan control using thermal sensors Anand Moon
2015-03-26 16:39 ` Anand Moon
2015-03-26 16:39 ` [PATCH 1/6] ARM: dts :exynos5422-odroidxu3 Add pwm-fan node to the Odroid-XU3 board Anand Moon
2015-03-26 16:39   ` Anand Moon
2015-04-08  7:46   ` Lukasz Majewski
2015-04-08  7:46     ` Lukasz Majewski
2015-03-26 16:39 ` [PATCH 2/6] ARM: dts exynos5420 update the cooling cells for core cpu0 Anand Moon
2015-03-26 16:39   ` Anand Moon
2015-04-08  7:47   ` Lukasz Majewski
2015-04-08  7:47     ` Lukasz Majewski
2015-03-26 16:39 ` [PATCH 3/6] ARM:dts exynos5422 Update the thermal sensor for tmu_cpu0 Anand Moon
2015-03-26 16:39   ` Anand Moon
2015-04-08  8:02   ` Lukasz Majewski
2015-04-08  8:02     ` Lukasz Majewski
2015-04-08  8:02     ` Lukasz Majewski
2015-04-08  9:12     ` Anand Moon
2015-04-08  9:12       ` Anand Moon
2015-04-08  9:12       ` Anand Moon
2015-04-08  9:30       ` Lukasz Majewski
2015-04-08  9:30         ` Lukasz Majewski
2015-04-08  9:30         ` Lukasz Majewski
2015-04-08  9:44         ` Anand Moon
2015-04-08  9:44           ` Anand Moon
2015-04-08  9:44           ` Anand Moon
2015-03-26 16:39 ` [PATCH 4/6] ARM: dts: OdroidXU3: Enable TMU at Exynos5422 base Anand Moon
2015-03-26 16:39   ` Anand Moon
2015-04-08  8:03   ` Lukasz Majewski
2015-04-08  8:03     ` Lukasz Majewski
2015-03-26 16:39 ` [PATCH 5/6] pwm: samsung: Fix output race on disabling Anand Moon
2015-03-26 16:39   ` Anand Moon
2015-03-26 16:39   ` Anand Moon
2015-04-08  8:28   ` Lukasz Majewski
2015-04-08  8:28     ` Lukasz Majewski
2015-04-08  8:42     ` Sjoerd Simons
2015-04-08  8:42       ` Sjoerd Simons
2015-04-08  8:53       ` Anand Moon
2015-04-08  8:53         ` Anand Moon
2015-04-08  8:53         ` Anand Moon
2015-03-26 16:39 ` [PATCH 6/6] hwmon: pwm-fan: Update the duty cycle inorder to control the pwm-fan Anand Moon
2015-03-26 16:39   ` Anand Moon
2015-04-08  8:44   ` Lukasz Majewski [this message]
2015-04-08  8:44     ` Lukasz Majewski
2015-04-08 13:11     ` Guenter Roeck
2015-04-08 13:11       ` Guenter Roeck
2015-04-08 15:32     ` Guenter Roeck
2015-04-08 15:32       ` Guenter Roeck
2015-04-08 16:02       ` Anand Moon
2015-04-08 16:02         ` Anand Moon
2015-04-08 16:02         ` Anand Moon
2015-04-08 16:53         ` Guenter Roeck
2015-04-08 16:53           ` Guenter Roeck
2015-04-08 16:53           ` Guenter Roeck
2015-04-08 17:49           ` Anand Moon
2015-04-08 17:49             ` Anand Moon
2015-04-08 17:49             ` Anand Moon
2015-04-10 11:28             ` Anand Moon
2015-04-10 11:28               ` Anand Moon
2015-04-10 11:28               ` Anand Moon
2015-04-10 12:00               ` Sjoerd Simons
2015-04-10 12:00                 ` Sjoerd Simons
2015-04-10 12:00                 ` Sjoerd Simons
2015-04-10 12:59                 ` Anand Moon
2015-04-10 12:59                   ` Anand Moon
2015-04-10 12:59                   ` Anand Moon
2015-04-10 13:09                   ` Guenter Roeck
2015-04-10 13:09                     ` Guenter Roeck
2015-04-10 13:09                     ` Guenter Roeck
2015-04-10 13:17                     ` Anand Moon
2015-04-10 13:17                       ` Anand Moon
2015-04-10 13:17                       ` Anand Moon
2015-04-10 13:30                     ` Sjoerd Simons
2015-04-10 13:30                       ` Sjoerd Simons
2015-04-10 13:30                       ` Sjoerd Simons
2015-04-10 13:58                       ` Thierry Reding
2015-04-10 13:58                         ` Thierry Reding
2015-04-10 13:58                         ` Thierry Reding
2015-04-10 17:25                         ` Ben Gamari
2015-04-10 17:25                           ` Ben Gamari
2015-04-10 17:25                           ` Ben Gamari
2015-04-10 17:58                           ` Guenter Roeck
2015-04-10 17:58                             ` Guenter Roeck
2015-04-10 17:58                             ` Guenter Roeck
2015-04-02 10:02 ` Exynos5422 odroidxu3 pwm-fan control using thermal sensors Markus Reichl
2015-04-02 10:02   ` Markus Reichl
2015-04-02 10:06 ` Markus Reichl
2015-04-02 10:06   ` Markus Reichl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150408104415.07e1c821@amdc2363 \
    --to=l.majewski@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux.amoon@gmail.com \
    --cc=linux@arm.linux.org.uk \
    --cc=linux@roeck-us.net \
    --cc=sjoerd.simons@collabora.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.