* [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
@ 2015-04-15 11:44 Wang Kai
2015-04-15 15:07 ` Catalin Marinas
0 siblings, 1 reply; 9+ messages in thread
From: Wang Kai @ 2015-04-15 11:44 UTC (permalink / raw)
To: catalin.marinas; +Cc: linux-mm, linux-kernel
In log_early function, crt_early_log should also count once when
'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
count from kmemleak_init is one less than 'actual number'.
Then, in kmemleak_init, if early_log buffer size equal actual
number, kmemleak will init sucessful, so change warning condition
to 'crt_early_log > ARRAY_SIZE(early_log)'.
Signed-off-by: Wang Kai <morgan.wang@huawei.com>
---
mm/kmemleak.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 5405aff..49956cf 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -814,6 +814,8 @@ static void __init log_early(int op_type, const void *ptr, size_t size,
}
if (crt_early_log >= ARRAY_SIZE(early_log)) {
+ /* kmemleak will stop recording, just count the requests */
+ crt_early_log++;
kmemleak_disable();
return;
}
@@ -1829,7 +1831,8 @@ void __init kmemleak_init(void)
object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
- if (crt_early_log >= ARRAY_SIZE(early_log))
+ /* Don't warning when crt_early_log == ARRAY_SIZE(early_log) */
+ if (crt_early_log > ARRAY_SIZE(early_log))
pr_warning("Early log buffer exceeded (%d), please increase "
"DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n", crt_early_log);
--
1.7.9.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
2015-04-15 11:44 [PATCH] kmemleak: record accurate early log buffer count and report when exceeded Wang Kai
@ 2015-04-15 15:07 ` Catalin Marinas
0 siblings, 0 replies; 9+ messages in thread
From: Catalin Marinas @ 2015-04-15 15:07 UTC (permalink / raw)
To: Wang Kai; +Cc: linux-mm, linux-kernel
BTW, you misspelled the LKML address (I fixed it: s/\.or/\.org/)
On Wed, Apr 15, 2015 at 12:44:52PM +0100, Wang Kai wrote:
> In log_early function, crt_early_log should also count once when
> 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
> count from kmemleak_init is one less than 'actual number'.
>
> Then, in kmemleak_init, if early_log buffer size equal actual
> number, kmemleak will init sucessful, so change warning condition
> to 'crt_early_log > ARRAY_SIZE(early_log)'.
>
> Signed-off-by: Wang Kai <morgan.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
@ 2015-04-15 15:07 ` Catalin Marinas
0 siblings, 0 replies; 9+ messages in thread
From: Catalin Marinas @ 2015-04-15 15:07 UTC (permalink / raw)
To: Wang Kai; +Cc: linux-mm, linux-kernel
BTW, you misspelled the LKML address (I fixed it: s/\.or/\.org/)
On Wed, Apr 15, 2015 at 12:44:52PM +0100, Wang Kai wrote:
> In log_early function, crt_early_log should also count once when
> 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
> count from kmemleak_init is one less than 'actual number'.
>
> Then, in kmemleak_init, if early_log buffer size equal actual
> number, kmemleak will init sucessful, so change warning condition
> to 'crt_early_log > ARRAY_SIZE(early_log)'.
>
> Signed-off-by: Wang Kai <morgan.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
@ 2015-04-15 11:49 ` Wang Kai
0 siblings, 0 replies; 9+ messages in thread
From: Wang Kai @ 2015-04-15 11:49 UTC (permalink / raw)
To: catalin.marinas; +Cc: linux-mm, linux-kernel
In log_early function, crt_early_log should also count once when
'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
count from kmemleak_init is one less than 'actual number'.
Then, in kmemleak_init, if early_log buffer size equal actual
number, kmemleak will init sucessful, so change warning condition
to 'crt_early_log > ARRAY_SIZE(early_log)'.
Signed-off-by: Wang Kai <morgan.wang@huawei.com>
---
mm/kmemleak.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 5405aff..49956cf 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -814,6 +814,8 @@ static void __init log_early(int op_type, const void *ptr, size_t size,
}
if (crt_early_log >= ARRAY_SIZE(early_log)) {
+ /* kmemleak will stop recording, just count the requests */
+ crt_early_log++;
kmemleak_disable();
return;
}
@@ -1829,7 +1831,8 @@ void __init kmemleak_init(void)
object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
- if (crt_early_log >= ARRAY_SIZE(early_log))
+ /* Don't warning when crt_early_log == ARRAY_SIZE(early_log) */
+ if (crt_early_log > ARRAY_SIZE(early_log))
pr_warning("Early log buffer exceeded (%d), please increase "
"DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n", crt_early_log);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
@ 2015-04-15 11:49 ` Wang Kai
0 siblings, 0 replies; 9+ messages in thread
From: Wang Kai @ 2015-04-15 11:49 UTC (permalink / raw)
To: catalin.marinas; +Cc: linux-mm, linux-kernel
In log_early function, crt_early_log should also count once when
'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
count from kmemleak_init is one less than 'actual number'.
Then, in kmemleak_init, if early_log buffer size equal actual
number, kmemleak will init sucessful, so change warning condition
to 'crt_early_log > ARRAY_SIZE(early_log)'.
Signed-off-by: Wang Kai <morgan.wang@huawei.com>
---
mm/kmemleak.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 5405aff..49956cf 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -814,6 +814,8 @@ static void __init log_early(int op_type, const void *ptr, size_t size,
}
if (crt_early_log >= ARRAY_SIZE(early_log)) {
+ /* kmemleak will stop recording, just count the requests */
+ crt_early_log++;
kmemleak_disable();
return;
}
@@ -1829,7 +1831,8 @@ void __init kmemleak_init(void)
object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
- if (crt_early_log >= ARRAY_SIZE(early_log))
+ /* Don't warning when crt_early_log == ARRAY_SIZE(early_log) */
+ if (crt_early_log > ARRAY_SIZE(early_log))
pr_warning("Early log buffer exceeded (%d), please increase "
"DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n", crt_early_log);
--
1.7.9.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
2015-04-15 11:49 ` Wang Kai
@ 2015-04-15 15:13 ` Catalin Marinas
-1 siblings, 0 replies; 9+ messages in thread
From: Catalin Marinas @ 2015-04-15 15:13 UTC (permalink / raw)
To: Wang Kai; +Cc: linux-mm, linux-kernel
(I see you corrected the LKML address; I replied to your early patch)
On Wed, Apr 15, 2015 at 12:49:23PM +0100, Wang Kai wrote:
> In log_early function, crt_early_log should also count once when
> 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
> count from kmemleak_init is one less than 'actual number'.
>
> Then, in kmemleak_init, if early_log buffer size equal actual
> number, kmemleak will init sucessful, so change warning condition
> to 'crt_early_log > ARRAY_SIZE(early_log)'.
>
> Signed-off-by: Wang Kai <morgan.wang@huawei.com>
> ---
> mm/kmemleak.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/mm/kmemleak.c b/mm/kmemleak.c
> index 5405aff..49956cf 100644
> --- a/mm/kmemleak.c
> +++ b/mm/kmemleak.c
> @@ -814,6 +814,8 @@ static void __init log_early(int op_type, const void *ptr, size_t size,
> }
>
> if (crt_early_log >= ARRAY_SIZE(early_log)) {
> + /* kmemleak will stop recording, just count the requests */
You could say "just count the last request" since kmemleak_disable()
would set kmemleak_error to 1 and you never get to this block again.
> + crt_early_log++;
> kmemleak_disable();
> return;
> }
> @@ -1829,7 +1831,8 @@ void __init kmemleak_init(void)
> object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
> scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
>
> - if (crt_early_log >= ARRAY_SIZE(early_log))
> + /* Don't warning when crt_early_log == ARRAY_SIZE(early_log) */
s/warning/warn/
But I don't think this comment is needed, just add it to the commit log.
> + if (crt_early_log > ARRAY_SIZE(early_log))
> pr_warning("Early log buffer exceeded (%d), please increase "
> "DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n", crt_early_log);
Otherwise, my ack still stands:
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
@ 2015-04-15 15:13 ` Catalin Marinas
0 siblings, 0 replies; 9+ messages in thread
From: Catalin Marinas @ 2015-04-15 15:13 UTC (permalink / raw)
To: Wang Kai; +Cc: linux-mm, linux-kernel
(I see you corrected the LKML address; I replied to your early patch)
On Wed, Apr 15, 2015 at 12:49:23PM +0100, Wang Kai wrote:
> In log_early function, crt_early_log should also count once when
> 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
> count from kmemleak_init is one less than 'actual number'.
>
> Then, in kmemleak_init, if early_log buffer size equal actual
> number, kmemleak will init sucessful, so change warning condition
> to 'crt_early_log > ARRAY_SIZE(early_log)'.
>
> Signed-off-by: Wang Kai <morgan.wang@huawei.com>
> ---
> mm/kmemleak.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/mm/kmemleak.c b/mm/kmemleak.c
> index 5405aff..49956cf 100644
> --- a/mm/kmemleak.c
> +++ b/mm/kmemleak.c
> @@ -814,6 +814,8 @@ static void __init log_early(int op_type, const void *ptr, size_t size,
> }
>
> if (crt_early_log >= ARRAY_SIZE(early_log)) {
> + /* kmemleak will stop recording, just count the requests */
You could say "just count the last request" since kmemleak_disable()
would set kmemleak_error to 1 and you never get to this block again.
> + crt_early_log++;
> kmemleak_disable();
> return;
> }
> @@ -1829,7 +1831,8 @@ void __init kmemleak_init(void)
> object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
> scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
>
> - if (crt_early_log >= ARRAY_SIZE(early_log))
> + /* Don't warning when crt_early_log == ARRAY_SIZE(early_log) */
s/warning/warn/
But I don't think this comment is needed, just add it to the commit log.
> + if (crt_early_log > ARRAY_SIZE(early_log))
> pr_warning("Early log buffer exceeded (%d), please increase "
> "DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n", crt_early_log);
Otherwise, my ack still stands:
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
2015-04-15 15:13 ` Catalin Marinas
@ 2015-04-15 23:23 ` Wang Kai
-1 siblings, 0 replies; 9+ messages in thread
From: Wang Kai @ 2015-04-15 23:23 UTC (permalink / raw)
To: Catalin Marinas; +Cc: linux-mm, linux-kernel
Thanks a lot for the correction.
On 2015/4/15 23:13, Catalin Marinas wrote:
> (I see you corrected the LKML address; I replied to your early patch)
>
> On Wed, Apr 15, 2015 at 12:49:23PM +0100, Wang Kai wrote:
>> In log_early function, crt_early_log should also count once when
>> 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
>> count from kmemleak_init is one less than 'actual number'.
>>
>> Then, in kmemleak_init, if early_log buffer size equal actual
>> number, kmemleak will init sucessful, so change warning condition
>> to 'crt_early_log > ARRAY_SIZE(early_log)'.
>>
>> Signed-off-by: Wang Kai <morgan.wang@huawei.com>
>> ---
>> mm/kmemleak.c | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/mm/kmemleak.c b/mm/kmemleak.c
>> index 5405aff..49956cf 100644
>> --- a/mm/kmemleak.c
>> +++ b/mm/kmemleak.c
>> @@ -814,6 +814,8 @@ static void __init log_early(int op_type, const void *ptr, size_t size,
>> }
>>
>> if (crt_early_log >= ARRAY_SIZE(early_log)) {
>> + /* kmemleak will stop recording, just count the requests */
>
> You could say "just count the last request" since kmemleak_disable()
> would set kmemleak_error to 1 and you never get to this block again.
>
>> + crt_early_log++;
>> kmemleak_disable();
>> return;
>> }
>> @@ -1829,7 +1831,8 @@ void __init kmemleak_init(void)
>> object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
>> scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
>>
>> - if (crt_early_log >= ARRAY_SIZE(early_log))
>> + /* Don't warning when crt_early_log == ARRAY_SIZE(early_log) */
>
> s/warning/warn/
>
> But I don't think this comment is needed, just add it to the commit log.
>
>> + if (crt_early_log > ARRAY_SIZE(early_log))
>> pr_warning("Early log buffer exceeded (%d), please increase "
>> "DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n", crt_early_log);
>
> Otherwise, my ack still stands:
>
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
>
> .
>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] kmemleak: record accurate early log buffer count and report when exceeded
@ 2015-04-15 23:23 ` Wang Kai
0 siblings, 0 replies; 9+ messages in thread
From: Wang Kai @ 2015-04-15 23:23 UTC (permalink / raw)
To: Catalin Marinas; +Cc: linux-mm, linux-kernel
Thanks a lot for the correction.
On 2015/4/15 23:13, Catalin Marinas wrote:
> (I see you corrected the LKML address; I replied to your early patch)
>
> On Wed, Apr 15, 2015 at 12:49:23PM +0100, Wang Kai wrote:
>> In log_early function, crt_early_log should also count once when
>> 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported
>> count from kmemleak_init is one less than 'actual number'.
>>
>> Then, in kmemleak_init, if early_log buffer size equal actual
>> number, kmemleak will init sucessful, so change warning condition
>> to 'crt_early_log > ARRAY_SIZE(early_log)'.
>>
>> Signed-off-by: Wang Kai <morgan.wang@huawei.com>
>> ---
>> mm/kmemleak.c | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/mm/kmemleak.c b/mm/kmemleak.c
>> index 5405aff..49956cf 100644
>> --- a/mm/kmemleak.c
>> +++ b/mm/kmemleak.c
>> @@ -814,6 +814,8 @@ static void __init log_early(int op_type, const void *ptr, size_t size,
>> }
>>
>> if (crt_early_log >= ARRAY_SIZE(early_log)) {
>> + /* kmemleak will stop recording, just count the requests */
>
> You could say "just count the last request" since kmemleak_disable()
> would set kmemleak_error to 1 and you never get to this block again.
>
>> + crt_early_log++;
>> kmemleak_disable();
>> return;
>> }
>> @@ -1829,7 +1831,8 @@ void __init kmemleak_init(void)
>> object_cache = KMEM_CACHE(kmemleak_object, SLAB_NOLEAKTRACE);
>> scan_area_cache = KMEM_CACHE(kmemleak_scan_area, SLAB_NOLEAKTRACE);
>>
>> - if (crt_early_log >= ARRAY_SIZE(early_log))
>> + /* Don't warning when crt_early_log == ARRAY_SIZE(early_log) */
>
> s/warning/warn/
>
> But I don't think this comment is needed, just add it to the commit log.
>
>> + if (crt_early_log > ARRAY_SIZE(early_log))
>> pr_warning("Early log buffer exceeded (%d), please increase "
>> "DEBUG_KMEMLEAK_EARLY_LOG_SIZE\n", crt_early_log);
>
> Otherwise, my ack still stands:
>
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
>
> .
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-04-15 23:26 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-15 11:44 [PATCH] kmemleak: record accurate early log buffer count and report when exceeded Wang Kai
2015-04-15 15:07 ` Catalin Marinas
2015-04-15 15:07 ` Catalin Marinas
2015-04-15 11:49 Wang Kai
2015-04-15 11:49 ` Wang Kai
2015-04-15 15:13 ` Catalin Marinas
2015-04-15 15:13 ` Catalin Marinas
2015-04-15 23:23 ` Wang Kai
2015-04-15 23:23 ` Wang Kai
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.