* [PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini
@ 2015-04-13 12:56 ` Gaël PORTAY
0 siblings, 0 replies; 12+ messages in thread
From: Gaël PORTAY @ 2015-04-13 12:56 UTC (permalink / raw)
To: Nicolas Ferre, Boris Brezillon, Alexandre Belloni,
Jean-Christophe PLAGNIOL-VILLARD
Cc: linux-arm-kernel, linux-kernel, Gaël PORTAY
Hi,
Here are two patches to bring support for a new hardware based on SAM9G25 SoC.
The first one adds the PIN controller definition for PWM0.
The second defines the new board.
Changes since v1:
- drop useless comments
- move pwm0 pinctrl's node close to tcb0
- drop ek boards from compatible machine
- add at91sam9g25 board to compatible machine
Changes since v2:
- update to v4.0
- fix alphabetical order between gpio_keys and pwm_leds
Best regards,
Gaël PORTAY (2):
ARM: at91/dt: sam9x5: add pinctrl for pwm0
ARM: at91/dt: add support for kizboxmini
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
--
1.9.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini
@ 2015-04-13 12:56 ` Gaël PORTAY
0 siblings, 0 replies; 12+ messages in thread
From: Gaël PORTAY @ 2015-04-13 12:56 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Here are two patches to bring support for a new hardware based on SAM9G25 SoC.
The first one adds the PIN controller definition for PWM0.
The second defines the new board.
Changes since v1:
- drop useless comments
- move pwm0 pinctrl's node close to tcb0
- drop ek boards from compatible machine
- add at91sam9g25 board to compatible machine
Changes since v2:
- update to v4.0
- fix alphabetical order between gpio_keys and pwm_leds
Best regards,
Ga?l PORTAY (2):
ARM: at91/dt: sam9x5: add pinctrl for pwm0
ARM: at91/dt: add support for kizboxmini
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
--
1.9.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 1/2] ARM: at91/dt: sam9x5: add pinctrl for pwm0
2015-04-13 12:56 ` Gaël PORTAY
@ 2015-04-13 12:56 ` Gaël PORTAY
-1 siblings, 0 replies; 12+ messages in thread
From: Gaël PORTAY @ 2015-04-13 12:56 UTC (permalink / raw)
To: Nicolas Ferre, Boris Brezillon, Alexandre Belloni,
Jean-Christophe PLAGNIOL-VILLARD
Cc: linux-arm-kernel, linux-kernel, Gaël PORTAY
Defines the pinctrl configurations for PWM0.
Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
arch/arm/boot/dts/at91sam9x5.dtsi | 46 +++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index d221179..98977ad 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -694,6 +694,52 @@
};
};
+ pwm0 {
+ pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+ atmel,pins =
+ <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+ atmel,pins =
+ <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+ atmel,pins =
+ <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+ atmel,pins =
+ <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+ atmel,pins =
+ <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+ atmel,pins =
+ <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+ atmel,pins =
+ <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 1/2] ARM: at91/dt: sam9x5: add pinctrl for pwm0
@ 2015-04-13 12:56 ` Gaël PORTAY
0 siblings, 0 replies; 12+ messages in thread
From: Gaël PORTAY @ 2015-04-13 12:56 UTC (permalink / raw)
To: linux-arm-kernel
Defines the pinctrl configurations for PWM0.
Signed-off-by: Ga?l PORTAY <g.portay@overkiz.com>
---
arch/arm/boot/dts/at91sam9x5.dtsi | 46 +++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index d221179..98977ad 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -694,6 +694,52 @@
};
};
+ pwm0 {
+ pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+ atmel,pins =
+ <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+ atmel,pins =
+ <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+ atmel,pins =
+ <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+ atmel,pins =
+ <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+ atmel,pins =
+ <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+ atmel,pins =
+ <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+ atmel,pins =
+ <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 2/2] ARM: at91/dt: add support for kizboxmini
2015-04-13 12:56 ` Gaël PORTAY
@ 2015-04-13 12:56 ` Gaël PORTAY
-1 siblings, 0 replies; 12+ messages in thread
From: Gaël PORTAY @ 2015-04-13 12:56 UTC (permalink / raw)
To: Nicolas Ferre, Boris Brezillon, Alexandre Belloni,
Jean-Christophe PLAGNIOL-VILLARD
Cc: linux-arm-kernel, linux-kernel, Gaël PORTAY
Add DT file for Kizbox mini board.
This board is based on Atmel's AT91SAM9G25 SoC.
Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
2 files changed, 130 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..9c11888 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
at91sam9rlek.dtb \
at91-ariag25.dtb \
at91-cosino_mega2560.dtb \
+ at91-kizboxmini.dtb \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
new file mode 100644
index 0000000..19b0ded
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -0,0 +1,129 @@
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox mini";
+ compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ linux,stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usart0: serial@f801c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ pwm0: pwm@f8034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+ &pinctrl_pwm0_pwm1_1>;
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ gpio-key,wakeup;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 2/2] ARM: at91/dt: add support for kizboxmini
@ 2015-04-13 12:56 ` Gaël PORTAY
0 siblings, 0 replies; 12+ messages in thread
From: Gaël PORTAY @ 2015-04-13 12:56 UTC (permalink / raw)
To: linux-arm-kernel
Add DT file for Kizbox mini board.
This board is based on Atmel's AT91SAM9G25 SoC.
Signed-off-by: Ga?l PORTAY <g.portay@overkiz.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
2 files changed, 130 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..9c11888 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
at91sam9rlek.dtb \
at91-ariag25.dtb \
at91-cosino_mega2560.dtb \
+ at91-kizboxmini.dtb \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
new file mode 100644
index 0000000..19b0ded
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -0,0 +1,129 @@
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014 Ga?l PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox mini";
+ compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ linux,stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usart0: serial at f801c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet at f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ pwm0: pwm at f8034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+ &pinctrl_pwm0_pwm1_1>;
+ status = "okay";
+ };
+
+ dbgu: serial at fffff200 {
+ status = "okay";
+ };
+
+ watchdog at fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci at 00600000 {
+ status = "okay";
+ };
+
+ usb1: ehci at 00700000 {
+ status = "okay";
+ };
+
+ nand0: nand at 40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap at 0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi at 20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ gpio-key,wakeup;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini
2015-04-13 12:56 ` Gaël PORTAY
@ 2015-04-16 9:12 ` Boris Brezillon
-1 siblings, 0 replies; 12+ messages in thread
From: Boris Brezillon @ 2015-04-16 9:12 UTC (permalink / raw)
To: Gaël PORTAY
Cc: Nicolas Ferre, Alexandre Belloni,
Jean-Christophe PLAGNIOL-VILLARD, linux-arm-kernel, linux-kernel
On Mon, 13 Apr 2015 14:56:12 +0200
Gaël PORTAY <g.portay@overkiz.com> wrote:
> Hi,
>
> Here are two patches to bring support for a new hardware based on SAM9G25 SoC.
>
> The first one adds the PIN controller definition for PWM0.
> The second defines the new board.
To the whole series,
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>
> Changes since v1:
> - drop useless comments
> - move pwm0 pinctrl's node close to tcb0
> - drop ek boards from compatible machine
> - add at91sam9g25 board to compatible machine
>
> Changes since v2:
> - update to v4.0
> - fix alphabetical order between gpio_keys and pwm_leds
>
> Best regards,
> Gaël PORTAY (2):
> ARM: at91/dt: sam9x5: add pinctrl for pwm0
> ARM: at91/dt: add support for kizboxmini
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++
> 3 files changed, 176 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini
@ 2015-04-16 9:12 ` Boris Brezillon
0 siblings, 0 replies; 12+ messages in thread
From: Boris Brezillon @ 2015-04-16 9:12 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 13 Apr 2015 14:56:12 +0200
Ga?l PORTAY <g.portay@overkiz.com> wrote:
> Hi,
>
> Here are two patches to bring support for a new hardware based on SAM9G25 SoC.
>
> The first one adds the PIN controller definition for PWM0.
> The second defines the new board.
To the whole series,
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>
> Changes since v1:
> - drop useless comments
> - move pwm0 pinctrl's node close to tcb0
> - drop ek boards from compatible machine
> - add at91sam9g25 board to compatible machine
>
> Changes since v2:
> - update to v4.0
> - fix alphabetical order between gpio_keys and pwm_leds
>
> Best regards,
> Ga?l PORTAY (2):
> ARM: at91/dt: sam9x5: add pinctrl for pwm0
> ARM: at91/dt: add support for kizboxmini
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++
> 3 files changed, 176 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 1/2] ARM: at91/dt: sam9x5: add pinctrl for pwm0
2015-04-13 12:56 ` Gaël PORTAY
@ 2015-04-16 9:30 ` Alexandre Belloni
-1 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-04-16 9:30 UTC (permalink / raw)
To: Gaël PORTAY
Cc: Nicolas Ferre, Boris Brezillon, Jean-Christophe PLAGNIOL-VILLARD,
linux-arm-kernel, linux-kernel
On 13/04/2015 at 14:56:13 +0200, Gaël PORTAY wrote :
> Defines the pinctrl configurations for PWM0.
>
> Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> arch/arm/boot/dts/at91sam9x5.dtsi | 46 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index d221179..98977ad 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -694,6 +694,52 @@
> };
> };
>
> + pwm0 {
> + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
> + atmel,pins =
> + <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
> + atmel,pins =
> + <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
> + atmel,pins =
> + <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
> + atmel,pins =
> + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
> + atmel,pins =
> + <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
> + atmel,pins =
> + <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
> + atmel,pins =
> + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
> + atmel,pins =
> + <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
> + atmel,pins =
> + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
> + atmel,pins =
> + <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> + };
> +
> tcb0 {
> pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
> atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> --
> 1.9.1
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 1/2] ARM: at91/dt: sam9x5: add pinctrl for pwm0
@ 2015-04-16 9:30 ` Alexandre Belloni
0 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-04-16 9:30 UTC (permalink / raw)
To: linux-arm-kernel
On 13/04/2015 at 14:56:13 +0200, Ga?l PORTAY wrote :
> Defines the pinctrl configurations for PWM0.
>
> Signed-off-by: Ga?l PORTAY <g.portay@overkiz.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> arch/arm/boot/dts/at91sam9x5.dtsi | 46 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index d221179..98977ad 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -694,6 +694,52 @@
> };
> };
>
> + pwm0 {
> + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
> + atmel,pins =
> + <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
> + atmel,pins =
> + <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
> + atmel,pins =
> + <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
> + atmel,pins =
> + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
> + atmel,pins =
> + <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
> + atmel,pins =
> + <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
> + atmel,pins =
> + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
> + atmel,pins =
> + <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> +
> + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
> + atmel,pins =
> + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
> + };
> + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
> + atmel,pins =
> + <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
> + };
> + };
> +
> tcb0 {
> pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
> atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
> --
> 1.9.1
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v3 2/2] ARM: at91/dt: add support for kizboxmini
2015-04-13 12:56 ` Gaël PORTAY
@ 2015-04-16 9:41 ` Alexandre Belloni
-1 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-04-16 9:41 UTC (permalink / raw)
To: Gaël PORTAY
Cc: Nicolas Ferre, Boris Brezillon, Jean-Christophe PLAGNIOL-VILLARD,
linux-arm-kernel, linux-kernel
On 13/04/2015 at 14:56:14 +0200, Gaël PORTAY wrote :
> Add DT file for Kizbox mini board.
> This board is based on Atmel's AT91SAM9G25 SoC.
>
> Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
> 2 files changed, 130 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a1c776b..9c11888 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
> at91sam9rlek.dtb \
> at91-ariag25.dtb \
> at91-cosino_mega2560.dtb \
> + at91-kizboxmini.dtb \
> at91sam9g15ek.dtb \
> at91sam9g25ek.dtb \
> at91sam9g35ek.dtb \
> diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
> new file mode 100644
> index 0000000..19b0ded
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-kizboxmini.dts
> @@ -0,0 +1,129 @@
> +/*
> + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
> + *
> + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +/dts-v1/;
> +#include "at91sam9g25.dtsi"
> +#include "at91sam9x5.dtsi"
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> + model = "Overkiz Kizbox mini";
> + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
> +
> + chosen {
> + bootargs = "ubi.mtd=ubi";
> + linux,stdout-path = &dbgu;
> + };
> +
> + memory {
> + reg = <0x20000000 0x8000000>;
> + };
> +
> + clocks {
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> +
> + main_xtal {
> + clock-frequency = <12000000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + usart0: serial@f801c000 {
> + status = "okay";
> + };
> +
> + macb0: ethernet@f802c000 {
> + phy-mode = "rmii";
> + status = "okay";
> + };
> +
> + pwm0: pwm@f8034000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_pwm0_1
> + &pinctrl_pwm0_pwm1_1>;
> + status = "okay";
> + };
> +
> + dbgu: serial@fffff200 {
> + status = "okay";
> + };
> +
> + watchdog@fffffe40 {
> + status = "okay";
> + };
> + };
> +
> + usb0: ohci@00600000 {
> + status = "okay";
> + };
> +
> + usb1: ehci@00700000 {
> + status = "okay";
> + };
> +
> + nand0: nand@40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + atmel,has-pmecc;
> + atmel,pmecc-cap = <4>;
> + atmel,pmecc-sector-size = <512>;
> + nand-on-flash-bbt;
> + status = "okay";
> +
> + bootstrap@0 {
> + label = "bootstrap";
> + reg = <0x0 0x20000>;
> + };
> +
> + ubi@20000 {
> + label = "ubi";
> + reg = <0x20000 0x7fe0000>;
> + };
> + };
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + prog {
> + label = "PB_PROG";
> + gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
> + linux,code = <0x102>;
> + gpio-key,wakeup;
> + };
> +
> + reset {
> + label = "PB_RST";
> + gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
> + linux,code = <0x100>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + pwm_leds {
> + compatible = "pwm-leds";
> +
> + green {
> + label = "pwm:green:user";
> + pwms = <&pwm0 0 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "default-on";
> + };
> +
> + red {
> + label = "pwm:red:user";
> + pwms = <&pwm0 1 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "default-on";
> + };
> + };
> +};
> --
> 1.9.1
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 2/2] ARM: at91/dt: add support for kizboxmini
@ 2015-04-16 9:41 ` Alexandre Belloni
0 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-04-16 9:41 UTC (permalink / raw)
To: linux-arm-kernel
On 13/04/2015 at 14:56:14 +0200, Ga?l PORTAY wrote :
> Add DT file for Kizbox mini board.
> This board is based on Atmel's AT91SAM9G25 SoC.
>
> Signed-off-by: Ga?l PORTAY <g.portay@overkiz.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
> 2 files changed, 130 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a1c776b..9c11888 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
> at91sam9rlek.dtb \
> at91-ariag25.dtb \
> at91-cosino_mega2560.dtb \
> + at91-kizboxmini.dtb \
> at91sam9g15ek.dtb \
> at91sam9g25ek.dtb \
> at91sam9g35ek.dtb \
> diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
> new file mode 100644
> index 0000000..19b0ded
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-kizboxmini.dts
> @@ -0,0 +1,129 @@
> +/*
> + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
> + *
> + * Copyright (C) 2014 Ga?l PORTAY <g.portay@overkiz.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +/dts-v1/;
> +#include "at91sam9g25.dtsi"
> +#include "at91sam9x5.dtsi"
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> + model = "Overkiz Kizbox mini";
> + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
> +
> + chosen {
> + bootargs = "ubi.mtd=ubi";
> + linux,stdout-path = &dbgu;
> + };
> +
> + memory {
> + reg = <0x20000000 0x8000000>;
> + };
> +
> + clocks {
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> +
> + main_xtal {
> + clock-frequency = <12000000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + usart0: serial at f801c000 {
> + status = "okay";
> + };
> +
> + macb0: ethernet at f802c000 {
> + phy-mode = "rmii";
> + status = "okay";
> + };
> +
> + pwm0: pwm at f8034000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_pwm0_1
> + &pinctrl_pwm0_pwm1_1>;
> + status = "okay";
> + };
> +
> + dbgu: serial at fffff200 {
> + status = "okay";
> + };
> +
> + watchdog at fffffe40 {
> + status = "okay";
> + };
> + };
> +
> + usb0: ohci at 00600000 {
> + status = "okay";
> + };
> +
> + usb1: ehci at 00700000 {
> + status = "okay";
> + };
> +
> + nand0: nand at 40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + atmel,has-pmecc;
> + atmel,pmecc-cap = <4>;
> + atmel,pmecc-sector-size = <512>;
> + nand-on-flash-bbt;
> + status = "okay";
> +
> + bootstrap at 0 {
> + label = "bootstrap";
> + reg = <0x0 0x20000>;
> + };
> +
> + ubi at 20000 {
> + label = "ubi";
> + reg = <0x20000 0x7fe0000>;
> + };
> + };
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + prog {
> + label = "PB_PROG";
> + gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
> + linux,code = <0x102>;
> + gpio-key,wakeup;
> + };
> +
> + reset {
> + label = "PB_RST";
> + gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
> + linux,code = <0x100>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + pwm_leds {
> + compatible = "pwm-leds";
> +
> + green {
> + label = "pwm:green:user";
> + pwms = <&pwm0 0 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "default-on";
> + };
> +
> + red {
> + label = "pwm:red:user";
> + pwms = <&pwm0 1 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "default-on";
> + };
> + };
> +};
> --
> 1.9.1
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-04-16 9:41 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-13 12:56 [PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini Gaël PORTAY
2015-04-13 12:56 ` Gaël PORTAY
2015-04-13 12:56 ` [PATCH v3 1/2] ARM: at91/dt: sam9x5: add pinctrl for pwm0 Gaël PORTAY
2015-04-13 12:56 ` Gaël PORTAY
2015-04-16 9:30 ` Alexandre Belloni
2015-04-16 9:30 ` Alexandre Belloni
2015-04-13 12:56 ` [PATCH v3 2/2] ARM: at91/dt: add support for kizboxmini Gaël PORTAY
2015-04-13 12:56 ` Gaël PORTAY
2015-04-16 9:41 ` Alexandre Belloni
2015-04-16 9:41 ` Alexandre Belloni
2015-04-16 9:12 ` [PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini Boris Brezillon
2015-04-16 9:12 ` Boris Brezillon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.